clean more on distclean

[mediagoblin.git] / Makefile.in

# Makefile.in
#
# Copyright © 2012, 2013 Brandon Invergo <brandon@invergo.net>
#
# Copying and distribution of this file, with or without modification,
# are permitted in any medium without royalty provided the copyright
# notice and this notice are preserved.  This file is offered as-is,
# without any warranty.

# List whatever files you want to include in your source distribution here.
# You can include whole directories but note that *everything* under that 
# directory will be included
DISTFILES = PKG-INFO Makefile.in configure setup.py install-sh

DESTDIR = 
VPATH = @srcdir@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_DISTNAME = ${PACKAGE_NAME}-${PACKAGE_VERSION}
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PYTHON = @PYTHON@
VIRTUALENV = @VIRTUALENV@
SPHINXBUILD = @SPHINXBUILD@
POSTGRES = @POSTGRES@
SHELL = @SHELL@
MKDIR_P = @MKDIR_P@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
prefix = @prefix@
srcdir = @srcdir@
abs_srcdir = @abs_srcdir@
datadir = @datadir@
datarootdir = @datarootdir@
pythondir = @pythondir@
pyexecdir = @pyexecdir@
pkgdatadir = $(datadir)/@PACKAGE_NAME@
pkgincludedir = $(includedir)/@PACKAGE_NAME@
pkgpythondir = @pkgpythondir@
pkgpyexecdir = @pkgpyexecdir@
PYTHONPATH = $(pythondir)$(PATH_SEPARATOR)$(DESTDIR)$(pythondir)

all: install

.PHONY: all install develop uninstall distclean info install-html html \
install-pdf pdf install-dvi dvi install-ps ps clean dist check \
installdirs postgresql update

# Since installing to a virtualenv is all the rage these days, support
# it here. If the VIRTUALENV variable is set to anything other than
# "no", set up a new virtualenv and install there, otherwise install
# as usual from setup.py
install: installdirs
	$(NORMAL_INSTALL)
ifneq ($(VIRTUALENV),no)
	$(VIRTUALENV) $(VIRTUALENV_FLAGS) --python=$(PYTHON) \
		--system-site-packages $(DESTDIR)$(prefix) || \
		$(VIRTUALENV) $(DESTDIR)$(prefix)
	$(DESTDIR)$(prefix)/bin/python $(srcdir)/setup.py install \
		--prefix=$(DESTDIR)$(prefix)
else
	$(PYTHON) $(srcdir)/setup.py install --prefix=$(DESTDIR)$(prefix)
endif
	if [[ $(DESTDIR)$(prefix) != $(abs_srcdir) ]]; then \
		$(INSTALL_DATA) $(srcdir)/Makefile $(DESTDIR)$(prefix)/Makefile; \
		$(INSTALL_DATA) $(srcdir)/lazycelery.sh $(DESTDIR)$(prefix)/lazycelery.sh; \
		$(INSTALL_DATA) $(srcdir)/lazyserver.sh $(DESTDIR)$(prefix)/lazyserver.sh; \
	fi

# The same as "install", except use the "develop" setup.py target
develop: installdirs
	$(NORMAL_INSTALL)
ifneq ($(VIRTUALENV),no)
	$(VIRTUALENV) $(VIRTUALENV_FLAGS) --python=$(PYTHON) \
		--system-site-packages $(DESTDIR)$(prefix) || \
		$(VIRTUALENV) $(DESTDIR)$(prefix)
	$(DESTDIR)$(prefix)/bin/python $(srcdir)/setup.py develop \
		--prefix=$(DESTDIR)$(prefix)
else
	$(PYTHON) $(srcdir)/setup.py develop --prefix=$(DESTDIR)$(prefix)
endif
	if [ "$(DESTDIR)$(prefix)" != "$(abs_srcdir)" ]; then \
		$(INSTALL_DATA) $(srcdir)/Makefile $(DESTDIR)$(prefix)/Makefile; \
		$(INSTALL_DATA) $(srcdir)/lazycelery.sh $(DESTDIR)$(prefix)/lazycelery.sh; \
		$(INSTALL_DATA) $(srcdir)/lazyserver.sh $(DESTDIR)$(prefix)/lazyserver.sh; \
	fi


# setup.py doesn't (yet) support an uninstall command, so until it does, you 
# must manually remove everything that was installed here. The following example
# should remove a basic package installed via setup.py, but please double- and 
# triple-check it so that you don't remove something you shouldn't!
# Be sure to remove any extra files you install, such as binaries or documentation!
# uninstall: 
#	case $(prefix) in
#		/usr|/usr/local )
#			exit 1 ;;
#		/www/*|/srv/* )
#		 	rm -rvf $(prefix) ;;
#	esac

# Just use the usual setup.py clean command
clean:
	$(PYTHON) setup.py clean


# Clean up the output of configure
distclean: 
	rm -v $(srcdir)/config.log
	rm -v $(srcdir)/config.status
	rm -rvf $(srcdir)/autom4te.cache
	rm -v $(srcdir)/aclocal.m4
	rm -v $(srcdir)/Makefile

# You can either use the setup.py sdist command or you can roll your own here
dist:
#	$(PYTHON) setup.py sdist
	mkdir $(PACKAGE_DISTNAME)
	cp -r $(DISTFILES) $(PACKAGE_DISTNAME)
	tar -czf $(PACKAGE_DISTNAME).tar.gz $(PACKAGE_DISTNAME)
	rm -rf $(PACKAGE_DISTNAME)

# Use the setup.py check command
check:
	$(PYTHON) setup.py check

# setup.py might complain if a directory doesn't exist so just in case, make the directory
# here
installdirs:
	$(MKDIR_P) $(DESTDIR)$(prefix)

# Set up PostgreSQL
postgresql:
	sudo -u $(POSTGRES) createuser mediagoblin
	sudo -u $(POSTGRES) createdb -E UNICODE -O mediagoblin mediagoblin

update:
ifneq ($(VIRTUALENV),no)
	$(prefix)/bin/python $(srcdir)/setup.py develop --prefix=$(prefix) --upgrade
else
	$(PYTHON) $(srcdir)/setup.py develop --prefix=$(prefix) --upgrade
endif	
	$(prefix)/bin/gmg dbupdate

# The following show how to install documentation. In this example,
# docs are built from a separate Makefile contained in the docs
# directory which uses the SPHINXBUILD variable to store the location
# of the sphinx-build (Python doc tool) binary to use.

$(DESTDIR)$(infodir)/mediagoblin.info: docs/build/texinfo/mediagoblin.info
	$(POST_INSTALL)
	$(INSTALL_DATA) @< $(DESTDIR)$@
	if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then
		install-info --dir-file=$(DESTDIR)$(infodir)/dir \
				$(DESTDIR)$(infodir)/foo.info;
	else true; fi

info: docs/build/texinfo/mediagoblin.info

docs/build/texinfo/mediagoblin.info: $(wildcard docs/source/*)
ifneq ($(SPHINXBUILD),no)
	$(MAKE) -C docs info SPHINXBUILD=$(SPHINXBUILD)
endif


install-html: html installdirs
	$(INSTALL_DATA) docs/build/html/* $(DESTDIR)$(htmldir)

html: docs/build/html/index.html

docs/build/html/index.html: $(wildcard $(srcdir)/docs/source/*)
ifneq ($(SPHINXBUILD),no)
	$(MAKE) -C docs html SPHINXBUILD=$(SPHINXBUILD)
endif


install-pdf: pdf installdirs
	$(INSTALL_DATA) docs/build/latex/mediagoblin.pdf $(DESTDIR)$(pdfdir)

pdf: docs/build/latex/mediagoblin.pdf

docs/build/latex/mediagoblin.pdf: $(wildcard $(srcdir)/docs/source/*)
ifneq ($(SPHINXBUILD),no)
	$(MAKE) -C docs latexpdf SPHINXBUILD=$(SPHINXBUILD)
endif


install-dvi:

dvi:

install-ps:

ps: