-#!/bin/bash
+#!/usr/bin/env bash
##
## Make sure only root can run our script
fi
}
+
+##
+## Does the current IP match the domain name?
+##
+check_IP_match () {
+ echo
+ echo Checking your domain name . . .
+ sleep 1
+ local IFACE=none
+ local IFCONFIG=`which ifconfig`
+ /sbin/route |grep default > /tmp/route$PPID
+
+ if grep default /tmp/route$PPID > /dev/null
+ then
+ local IFACE=`cut -c 73-100 /tmp/route$PPID |head -1`
+ else
+ echo WARNING: Cannot check your IP number.
+ fi
+ local IP=`$IFCONFIG $IFACE|grep "inet addr:" |cut -d":" -f 2|cut -d" " -f1|head -1`
+ local RESOLVED_IP=`dig +short $1`
+
+ IP_LOOKS_GOOD=0
+ if [[ ! -z $RESOLVED_IP ]]
+ then
+ if [ $IP == $RESOLVED_IP ]
+ then
+ echo $1 resolves to $IP. Looks good!
+ echo
+ local IP_LOOKS_GOOD=1
+ fi
+ fi
+ if [ $IP_LOOKS_GOOD == 0 ]
+ then
+ echo "-----------------------------------------"
+ echo $1 does not resolve to $IP.
+ echo IT IS ALMOST CERTAINLY A BAD IDEA TO TURN ON LET\'S ENCRYPT!!
+ echo Unless you know why this check failed, DO NOT USE Let\'s Encrypt.
+ echo
+ echo You should answer \"n\" at the next prompt and disable Let\'s Encrypt.
+ echo You have been warned.
+ echo "-----------------------------------------"
+ fi
+ sleep 1
+}
+
+##
+## Do we have docker?
+##
+check_and_install_docker () {
+ docker_path=`which docker.io || which docker`
+ if [ -z $docker_path ]; then
+ read -p "Docker not installed. Enter to install from https://get.docker.com/ or Ctrl+C to exit"
+ curl https://get.docker.com/ | sh
+ fi
+ docker_path=`which docker.io || which docker`
+ if [ -z $docker_path ]; then
+ echo Docker install failed. Quitting.
+ exit
+ fi
+}
+
+##
+## What are we running on
+##
+check_OS() {
+ echo `uname -s`
+}
+
+##
+## OS X available memory
+##
+check_osx_memory() {
+ echo `top -l 1 | awk '/PhysMem:/ {print $2}' | sed s/G//`
+}
+
+##
+## Linux available memory
+##
+check_linux_memory() {
+ echo `free -g --si | awk ' /Mem:/ {print $2} '`
+}
+
##
## Do we have enough memory and disk space for Discourse?
##
check_disk_and_memory() {
- avail_mem=`free -g --si | awk ' /Mem:/ {print $2} '`
+ os_type=$(check_OS)
+ avail_mem=0
+ if [ $os_type == "Darwin" ]; then
+ avail_mem=$(check_osx_memory)
+ else
+ avail_mem=$(check_linux_memory)
+ fi
+
if [ "$avail_mem" -lt 1 ]; then
echo "WARNING: Discourse requires 1GB RAM to run. This system does not appear"
echo "to have sufficient memory."
exit 1
fi
- if [ "$avail_mem" -lt 2 ]; then
+ if [ "$avail_mem" -le 2 ]; then
total_swap=`free -g --si | awk ' /Swap:/ {print $2} '`
if [ "$total_swap" -lt 2 ]; then
- echo "WARNING: Discourse requires at least 2GB of swap when running with less "
- echo "than 2GB of RAM. This system does not appear to have sufficient swap space."
+ echo "WARNING: Discourse requires at least 2GB of swap when running with 2GB of RAM"
+ echo "or less. This system does not appear to have sufficient swap space."
echo
echo "Without sufficient swap space, your site may not work properly, and future"
echo "upgrades of Discourse may not complete successfully."
local changelog=/tmp/changelog.$PPID
# grab info about total system ram and physical (NOT LOGICAL!) CPU cores
- avail_gb="$(LANG=C free -g --si | grep '^Mem:' | awk '{print $2}')"
- avail_cores=`cat /proc/cpuinfo | grep "cpu cores" | uniq | awk '{print $4}'`
+ avail_gb=0
+ avail_cores=0
+ os_type=$(check_OS)
+ if [ $os_type == "Darwin" ]; then
+ avail_gb=$(check_osx_memory)
+ avail_cores=`sysctl hw.ncpu | awk '/hw.ncpu:/ {print $2}'`
+ else
+ avail_gb=$(check_linux_memory)
+ avail_cores=$((`awk '/cpu cores/ {print $4;exit}' /proc/cpuinfo`*`sort /proc/cpuinfo | uniq | grep -c "physical id"`))
+ fi
echo "Found ${avail_gb}GB of memory and $avail_cores physical CPU cores"
# db_shared_buffers: 128MB for 1GB, 256MB for 2GB, or 256MB * GB, max 4096MB
fi
db_shared_buffers=$(( db_shared_buffers < 4096 ? db_shared_buffers : 4096 ))
- sed -i -e "s/^ #db_shared_buffers:.*/ db_shared_buffers: \"${db_shared_buffers}MB\"/w $changelog" $config_file
+ sed -i -e "s/^ #\?db_shared_buffers:.*/ db_shared_buffers: \"${db_shared_buffers}MB\"/w $changelog" $config_file
if [ -s $changelog ]
then
echo "setting db_shared_buffers = ${db_shared_buffers}MB"
fi
unicorn_workers=$(( unicorn_workers < 8 ? unicorn_workers : 8 ))
- sed -i -e "s/^ #UNICORN_WORKERS:.*/ UNICORN_WORKERS: ${unicorn_workers}/w $changelog" $config_file
+ sed -i -e "s/^ #\?UNICORN_WORKERS:.*/ UNICORN_WORKERS: ${unicorn_workers}/w $changelog" $config_file
if [ -s $changelog ]
then
echo "setting UNICORN_WORKERS = ${unicorn_workers}"
echo "server like Apache or nginx, you will need to bind to a different port"
echo
echo "See https://meta.discourse.org/t/17247"
+ echo
+ echo "If you are reconfiguring an already-configured Discourse, use "
+ echo
+ echo "./launcher stop app"
+ echo
+ echo "to stop Discourse before you reconfigure it and try again."
exit 1
fi
}
+##
+## read a variable from the config file
+##
+read_config() {
+
+ config_line=`egrep "^ #?$1:" $config_file`
+ read_config_result=`echo $config_line | awk '{print $2}'`
+ read_config_result=`echo $read_config_result | sed "s/^\([\"']\)\(.*\)\1\$/\2/g"`
+}
+
+
+
##
## prompt user for typical Discourse config file values
##
ask_user_for_config() {
+ # NOTE: Defaults now come from standalone.yml
+
local changelog=/tmp/changelog.$PPID
- local hostname="discourse.example.com"
- local developer_emails="me@example.com,you@example.com"
- local smtp_address="smtp.example.com"
- local smtp_port="587"
- local smtp_user_name="postmaster@discourse.example.com"
- local smtp_password=""
- local letsencrypt_account_email="me@example.com"
- local letsencrypt_status="ENTER to skip"
+ read_config "DISCOURSE_SMTP_ADDRESS"
+ local smtp_address=$read_config_result
+ # NOTE: if there are spaces between emails, this breaks, but a human should be paying attention
+ read_config "DISCOURSE_DEVELOPER_EMAILS"
+ local developer_emails=$read_config_result
+ read_config "DISCOURSE_SMTP_PASSWORD"
+ local smtp_password=$read_config_result
+ read_config "DISCOURSE_SMTP_PORT"
+ local smtp_port=$read_config_result
+ read_config "DISCOURSE_SMTP_USER_NAME"
+ local smtp_user_name=$read_config_result
+ if [ "$smtp_password" = "pa$$word" ]
+ then
+ smtp_password = ""
+ fi
+ read_config "LETSENCRYPT_ACCOUNT_EMAIL"
+ local letsencrypt_account_email=$read_config_result
+ if [ $letsencrypt_account_email = "me@example.com" ]
+ then
+ local letsencrypt_status="ENTER to skip"
+ else
+ local letsencrypt_status="Enter 'OFF' to disable."
+ fi
+
+ read_config "DISCOURSE_HOSTNAME"
+ hostname=$read_config_result
local new_value=""
local config_ok="n"
if [ ! -z $developer_emails ]
then
- read -p "Email address for admin account? [$developer_emails]: " new_value
+ read -p "Email address for admin account(s)? [$developer_emails]: " new_value
if [ ! -z $new_value ]
then
developer_emails=$new_value
if [ ! -z $new_value ]
then
letsencrypt_account_email=$new_value
- if [ "$new_value" == "off" ]
+ if [ "${new_value,,}" = "off" ]
then
letsencrypt_status="ENTER to skip"
else
fi
fi
+ if [ "$letsencrypt_status" == "Enter 'OFF' to disable." ]
+ then
+ check_IP_match $hostname
+ fi
+
echo -e "\nDoes this look right?\n"
echo "Hostname : $hostname"
echo "Email : $developer_emails"
echo "Let's Encrypt : $letsencrypt_account_email"
fi
+
echo ""
read -p "ENTER to continue, 'n' to try again, Ctrl+C to exit: " config_ok
done
update_ok="n"
fi
- sed -i -e "s/^ #DISCOURSE_SMTP_PORT:.*/ DISCOURSE_SMTP_PORT: $smtp_port/w $changelog" $config_file
+ sed -i -e "s/^ #\?DISCOURSE_SMTP_PORT:.*/ DISCOURSE_SMTP_PORT: $smtp_port/w $changelog" $config_file
if [ -s $changelog ]
then
rm $changelog
update_ok="n"
fi
- sed -i -e "s/^ #DISCOURSE_SMTP_USER_NAME:.*/ DISCOURSE_SMTP_USER_NAME: $smtp_user_name/w $changelog" $config_file
+ sed -i -e "s/^ #\?DISCOURSE_SMTP_USER_NAME:.*/ DISCOURSE_SMTP_USER_NAME: $smtp_user_name/w $changelog" $config_file
if [ -s $changelog ]
then
rm $changelog
update_ok="n"
fi
- sed -i -e "s/^ #DISCOURSE_SMTP_PASSWORD:.*/ DISCOURSE_SMTP_PASSWORD: \"${smtp_password/\//\\/}\"/w $changelog" $config_file
+ sed -i -e "s/^ #\?DISCOURSE_SMTP_PASSWORD:.*/ DISCOURSE_SMTP_PASSWORD: \"${smtp_password/\//\\/}\"/w $changelog" $config_file
if [ -s $changelog ]
then
rm $changelog
update_ok="n"
fi
- if [ "$letsencrypt_status" != "ENTER to skip" ]
+ if [ "$letsencrypt_status" = "ENTER to skip" ]
then
- sed -i -e "s/^ #LETSENCRYPT_ACCOUNT_EMAIL:.*/ LETSENCRYPT_ACCOUNT_EMAIL: $letsencrypt_account_email/w $changelog" $config_file
+ local src='^ #\?- "templates\/web.ssl.template.yml"'
+ local dst=' #\- "templates\/web.ssl.template.yml"'
+ sed -i -e "s/$src/$dst/w $changelog" $config_file
+ if [ ! -s $changelog ]
+ then
+ update_ok="n"
+ echo "web.ssl.template.yml NOT DISABLED--Are you using a non-standard template?"
+ fi
+ local src='^ #\?- "templates\/web.letsencrypt.ssl.template.yml"'
+ local dst=' #- "templates\/web.letsencrypt.ssl.template.yml"'
+
+ sed -i -e "s/$src/$dst/w $changelog" $config_file
+ if [ ! -s $changelog ]
+ then
+ update_ok="n"
+ echo "web.ssl.template.yml NOT DISABLED--Are you using a non-standard template?"
+ fi
+ else # enable let's encrypt
+ echo "Let's Encrypt will be enabled for $letsencrypt_account_email"
+ sed -i -e "s/^ #\?LETSENCRYPT_ACCOUNT_EMAIL:.*/ LETSENCRYPT_ACCOUNT_EMAIL: $letsencrypt_account_email/w $changelog" $config_file
if [ -s $changelog ]
then
rm $changelog
echo "LETSENCRYPT_ACCOUNT_EMAIL change failed."
update_ok="n"
fi
- local src='^ #- "templates\/web.ssl.template.yml"'
+ local src='^ #\?- "templates\/web.ssl.template.yml"'
local dst=' \- "templates\/web.ssl.template.yml"'
sed -i -e "s/$src/$dst/w $changelog" $config_file
if [ -s $changelog ]
update_ok="n"
echo "web.ssl.template.yml NOT ENABLED--was it on already?"
fi
- local src='^ #- "templates\/web.letsencrypt.ssl.template.yml"'
+ local src='^ #\?- "templates\/web.letsencrypt.ssl.template.yml"'
local dst=' - "templates\/web.letsencrypt.ssl.template.yml"'
sed -i -e "s/$src/$dst/w $changelog" $config_file
## Check requirements before creating a copy of a config file we won't edit
##
check_root
+check_and_install_docker
check_disk_and_memory
check_ports
if [ -a $config_file ]
then
echo "The configuration file $config_file already exists!"
- echo ""
- echo "If you want to delete your old configuration file and start over:"
- echo "rm $config_file"
- exit 1
+ echo
+ echo ". . . reconfiguring . . ."
+ echo
else
cp $template_path $config_file
fi
##
## if we reach this point without exiting, OK to proceed
+## rebuild won't fail if there's nothing to rebuild and does the restart
##
-./launcher bootstrap $app_name && ./launcher start $app_name
+sleep 5 # Just a chance to ^C in case they were too fast on the draw
+time ./launcher rebuild $app_name
projects / discourse_docker.git / blobdiff