1 $Cambridge: exim/doc/doc-txt/ChangeLog,v 1.175 2005/06/27 18:34:35 tom Exp $
3 Change log file for Exim from version 4.21
4 -------------------------------------------
10 TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
12 PH/01 When a transport filter timed out in a pipe delivery, and the pipe
13 command itself ended in error, the underlying message about the transport
14 filter timeout was being overwritten with the pipe command error. Now the
15 underlying error message should be appended to the second error message.
17 TK/01 Fix poll() being unavailable on Mac OSX 10.2.
19 PH/02 Reduce the amount of output that "make" produces by default. Full output
20 can still be requested.
22 PH/03 The warning log line about a condition test deferring for a "warn" verb
23 was being output only once per connection, rather than after each
24 occurrence (because it was using the same function as for successful
25 "warn" verbs). This seems wrong, so I have changed it.
27 TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that
28 it should not have, which might have caused a crash in the right
29 circumstances, but probably never did.
31 PH/04 Installed a modified version of Tony Finch's patch to make submission
32 mode fix the return path as well as the Sender: header line, and to
33 add a /name= option so that you can make the user's friendly name appear
36 TF/03 Added the control = fakedefer ACL modifier.
38 TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
39 Mark Lowes for thorough testing.
41 TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
43 TK/03 Merged latest SRS patch from Miles Wilton.
45 PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
46 with the definition in sysexits.h (which is #included earlier).
47 Fortunately, Exim does not actually use EX_OK. The code used to try to
48 preserve the sysexits.h value, by assumimg that macro definitions were
49 scanned for macro replacements. I have been disabused of this notion,
50 so now the code just undefines EX_OK before #including unistd.h.
52 PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout
53 in the smtp transport. When a block could not be written in a single
54 write() function, the timeout was being re-applied to each part-write.
55 This seems wrong - if the receiver was accepting one byte at a time it
56 would take for ever. The timeout is now adjusted when this happens. It
57 doesn't have to be particularly precise.
59 TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
60 details. Thanks to Chris Webb <chris@arachsys.com> for the patch!
62 PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
63 without a domain if the check to <postmaster@domain> fails.
65 SC/01 Eximstats: added -xls and the ability to specify output files
66 (patch written by Frank Heydlauf).
68 SC/02 Eximstats: use FileHandles for outputing results.
70 SC/03 Eximstats: allow any combination of xls, txt, and html output.
72 SC/04 Eximstats: fixed display of large numbers with -nvr option
74 SC/05 Eximstats: fixed merging of reports with empty tables.
76 SC/06 Eximstats: added the -include_original_destination flag
78 SC/07 Eximstats: removed tabs and trailing whitespace.
80 TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller.
82 TK/06 MBOX spool code: Add real "From " MBOX separator line
83 so the .eml file is really in mbox format (even though
84 most programs do not really care). Patch from Alex Miller.
86 TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
87 The latter is generated from $received_to and is only set if the
88 message has one envelope recipient. SA can use these headers,
89 obviously out-of-the-box. Patch from Alex Miller.
91 PH/08 The ${def test on a variable was returning false if the variable's
92 value was "0", contrary to what the specification has always said!
93 The result should be true unless the variable is empty.
95 PH/09 The syntax error of a character other than { following "${if
96 def:variable_name" (after optional whitespace) was not being diagnosed.
97 An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an
98 accidental colon was present, for example, could give incorrect results.
100 PH/10 Tidied the code in a number of places where the st_size field of a stat()
101 result is used (not including appendfile, where other changes are about
104 PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
105 This involved changing a lot of size variables from int to off_t. It
106 should work with maildirs and everything.
108 TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of
109 spamd dying while we are connected to it.
111 TF/05 Fixed a ${extract error message typo reported by Jeremy Harris
114 PH/12 Applied Alex Kiernan's patch for the API change for the error callback
115 function for BDB 4.3.
117 PH/13 Changed auto_thaw such that it does not apply to bounce messages.
119 PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
120 the sources for PCRE have been re-arranged and more files are now
123 PH/15 The code I had for printing potentially long long variables in PH/11
124 above was not the best (it lost precision). The length of off_t variables
125 is now inspected at build time, and an appropriate printing format (%ld
126 or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T
127 to be "long long int" or "long int". This is needed for the internal
128 formatting function string_vformat().
130 PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
131 the configuration file to be ":syslog", then the script "guesses" where
132 the logs files are, rather than using the compiled in default. In our
133 case the guess is not the same as the compiled default, so the script
134 suddenly stopped working when I started to use syslog. The patch checks
135 to see if log_file_path is "". If so, it attempts to read it from exim
136 with no configuration file to get the compiled in version, before it
137 falls back to the previous guessing code."
139 TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
140 implementing BATV in an Exim configuration. See NewStuff for the gory
143 PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and
144 Makefile that are specific to HP-UX.
146 PH/18 If the "use_postmaster" option was set for a recipient callout together
147 with the "random" option, the postmaster address was used as the MAIL
148 FROM address for the random test, but not for the subsequent recipient
149 test. It is now used for both.
151 PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
152 patch removes a few documentation additions to RFC 3028, because the
153 latest draft now contains them. It adds the new en;ascii-case comparator
154 and a new error check for 8bit text in MIME parts. Comparator and
155 require names are now matched exactly. I enabled the subaddress
156 extension, but it is not well tested yet (read: it works for me)."
158 PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to
159 rework some of the code of TK/09 above to avoid the hardwired use of
160 "%lld" and "long long". Replaced the call to snprintf() with a call to
163 PH/21 Added another message to those in 4.51/PH/42, namely "All relevant MX
164 records point to non-existent hosts".
166 PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with
167 experimental DomainKeys support:
169 (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken.
170 (2) On an error such as an illegally used "control", the wrong name for
171 the control was given.
173 These problems did NOT occur unless DomainKeys support was compiled.
175 PH/23 Added daemon_startup_retries and daemon_startup_sleep.
177 PH/24 Added ${if match_ip condition.
179 PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints
180 databases so that it will be absolutely obvious if a crash occurs in the
181 DB library. This is a regular occurrence (often caused by mis-matched
184 PH/26 Insert a lot of missing (void) casts for functions such as chown(),
185 chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were
186 picked up on a user's system that detects such things. There doesn't seem
187 to be a gcc warning option for this - only an attribute that has to be
188 put on the function's prototype. It seems that in Fedora Core 4 they have
189 set this on a number of new functions. No doubt there will be more in due
192 PH/27 If a dnslookup or manualroute router is set with verify=only, it need not
193 specify a transport. However, if an address that was verified by such a
194 router was the subject of a callout, Exim crashed because it tried to
195 read the rcpt_include_affixes from the non-existent transport. Now it
196 just assumes that the setting of that option is false. This bug was
197 introduced by 4.51/PH/31.
199 PH/28 Changed -d+all to exclude +memory, because that information is very
200 rarely of interest, but it makes the output a lot bigger. People tend to
201 do -d+all out of habit.
203 PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the
204 code in os-type was giving problems when libc.so lives in lib64, like on
207 PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
208 aren't the modern standard, and it seems that some systems' include files
209 don't always have them. Exim was already checking for some of the newer
210 ones like T_AAAA, and defining it itself. I've added checks for all the
211 record types that Exim uses.
213 TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction
214 with a change in libdomainkeys > 0.64.
216 TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
217 from DNS. If the selector record carries the flag, it now has
218 precedence over the domain-wide flag.
220 TK/12 Cleared some compiler warnings related to SPF, SRS and DK code.
227 TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
228 doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
230 TK/02 Fix ACL "control" statement not being available in MIME ACL.
232 TK/03 Fix ACL "regex" condition not being available in MIME ACL.
234 PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
235 to test Sieve filters that use "vacation".
237 PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
238 that changes the way the GnuTLS parameters are stored in the cache file.
239 The new format can be generated externally. For backward compatibility,
240 if the data in the cache doesn't make sense, Exim assumes it has read an
241 old-format file, and it generates new data and writes a new file. This
242 means that you can't go back to an older release without removing the
245 PH/03 A redirect router that has both "unseen" and "one_time" set does not
246 work if there are any delivery delays because "one_time" forces the
247 parent to be marked "delivered", so its unseen clone is never tried
248 again. For this reason, Exim now forbids the simultaneous setting of
251 PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
252 redirected to themselves ("homonym" addresses). Read the long ChangeLog
253 entry if you want to know the details. The fix, however, neglected to
254 consider the case when local delivery batching is involved. The test for
255 "previously delivered" was not happening when checking to see if an
256 address could be batched with a previous (undelivered) one; under
257 certain circumstances this could lead to multiple deliveries to the same
260 PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
261 in its include files, and this causes problems building Exim.
263 PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
264 header_syntax) but Exim was just ignoring anything given after a slash.
265 In particular, this caused confusion with an attempt to use "verify =
266 reverse_host_lookup/defer_ok". An error is now given when options are
267 supplied for verify items that do not have them. (Maybe reverse_host_
268 lookup should have a defer_ok option, but that's a different point.)
270 PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
271 defined by RFC 821) to 2048, because there were problems with some AUTH
272 commands, and RFC 1869 says the size should be increased for extended
273 SMTP commands that take arguments.
275 PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
278 PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
279 "unknown" error; now it says that the functionality isn't in the binary.
281 PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
282 an address' error message when a string expansion fails (syntax or
283 whatever). Otherwise the password may appear in the log. Following change
284 PH/42 below, there is no longer a chance of it appearing in a bounce
287 PH/11 Installed exipick version 20050225.0 from John Jetmore.
289 PH/12 If the last host in a fallback_hosts list was multihomed, only the first
290 of its addresses was ever tried. (Bugzilla bug #2.)
292 PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
293 the result incorrectly in the debug output. (It correctly added a newline
294 to what was transported.)
296 TF/01 Added $received_time.
298 PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
299 commented out examples of how to interface to a virus scanner and to
300 SpamAssassin. Also added commented examples of av_scanner and
301 spamd_address settings.
303 PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
304 and controls are allowed in which ACLs. There were a couple of minor
305 errors. Some of the entries in the conditions table (which is a table of
306 where they are NOT allowed) were getting very unwieldy; rewrote them as a
307 negation of where the condition IS allowed.
309 PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
311 PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
312 header file does not have a version number, so I've had to invent a new
313 value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
314 API. The code is untested by me (my Linux distribution still has 0.3.2 of
315 radiusclient), but it was contributed by a Radius user.
317 PH/18 Installed Lars Mainka's patch for the support of CRL collections in
318 files or directories, for OpenSSL.
320 PH/19 When an Exim process that is running as root has to create an Exim log
321 file, it does so in a subprocess that runs as exim:exim so as to get the
322 ownership right at creation (otherwise, other Exim processes might see
323 the file with the wrong ownership). There was no test for failure of this
324 fork() call, which would lead to the process getting stuck as it waited
325 for a non-existent subprocess. Forks do occasionally fail when resources
326 run out. I reviewed all the other calls to fork(); they all seem to check
329 PH/20 When checking for unexpected SMTP input at connect time (before writing
330 the banner), Exim was not dealing correctly with a non-positive return
331 from the read() function. If the client had disconnected by this time,
332 the result was a log entry for a synchronization error with an empty
333 string after "input=" when read() returned zero. If read() returned -1
334 (an event I could not check), uninitialized data bytes were printed.
335 There were reports of junk text (parts of files, etc) appearing after
338 PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
340 PH/22 Added support for macro redefinition, and (re)definition in between
341 driver and ACL definitions.
343 PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
344 forgetting to use the resulting value; it was using the unexpanded value.
346 PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
347 hadn't been configured. The fix is from Juergen Kreileder, who
348 understands it better than I do:
350 "Here's what I see happening with three configured cyrus_sasl
351 authenticators configured (plain, login, cram-md5):
353 On startup auth_cyrus_sasl_init() gets called for each of these.
354 This means three calls to sasl_listmech() without a specified mech_list.
355 => SASL tests which mechs of all available mechs actually work
356 => three warnings about OTP not working
357 => the returned list contains: plain, login, cram-md5, digest-md5, ...
359 With the patch, sasl_listmech() also gets called three times. But now
360 SASL's mech_list option is set to the server_mech specified in the the
361 authenticator. Or in other words, the answer from sasl_listmech()
362 gets limited to just the mech you're testing for (which is different
364 => the return list contains just 'plain' or 'login', 'cram-md5' or
365 nothing depending on the value of ob->server_mech.
367 I've just tested the patch: Authentication still works fine,
368 unavailable mechs specified in the exim configuration are still
369 caught, and the auth.log warnings about OTP are gone."
371 PH/25 When debugging is enabled, the contents of the command line are added
372 to the debugging output, even when log_selector=+arguments is not
375 PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
376 answer is "GNU", and only if the return is "GNU/something" is the answer
379 PH/27 $acl_verify_message is now set immediately after the failure of a
380 verification in an ACL, and so is available in subsequent modifiers. In
381 particular, the message can be preserved by coding like this:
383 warn !verify = sender
384 set acl_m0 = $acl_verify_message
386 Previously, $acl_verify_message was set only while expanding "message"
387 and "log_message" when a very denied access.
389 PH/28 Modified OS/os.c-Linux with
391 -#ifndef OS_LOAD_AVERAGE
392 +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
394 to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
395 nomenclature these days.)
397 PH/29 Installed patch from the Sieve maintainer that adds the options
398 sieve_useraddress and sieve_subaddress to the redirect router.
400 PH/30 In these circumstances:
401 . Two addresses routed to the same list of hosts;
402 . First host does not offer TLS;
403 . First host accepts first address;
404 . First host gives temporary error to second address;
405 . Second host offers TLS and a TLS session is established;
406 . Second host accepts second address.
407 Exim incorrectly logged both deliveries with the TLS parameters (cipher
408 and peerdn, if requested) that were in fact used only for the second
411 PH/31 When doing a callout as part of verifying an address, Exim was not paying
412 attention to any local part prefix or suffix that was matched by the
413 router that accepted the address. It now behaves in the same way as it
414 does for delivery: the affixes are removed from the local part unless
415 rcpt_include_affixes is set on the transport.
417 PH/32 Add the sender address, as F=<...>, to the log line when logging a
418 timeout during the DATA phase of an incoming message.
420 PH/33 Sieve envelope tests were broken for match types other than :is. I have
421 applied a patch sanctioned by the Sieve maintainer.
423 PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
424 the uid or gid is negative. A case of a negative gid caused this to be
425 noticed. The fix allows for either to be negative.
427 PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
428 clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
431 PH/36 The change PH/12 above was broken. Fixed it.
433 PH/37 Exim used to check for duplicate addresses in the middle of routing, on
434 the grounds that routing the same address twice would always produce the
435 same answer. This might have been true once, but it is certainly no
436 longer true now. Routing a child address may depend on the previous
437 routing that produced that child. Some complicated redirection strategies
438 went wrong when messages had multiple recipients, and made Exim's
439 behaviour dependent on the order in which the addresses were given.
441 I have moved the duplicate checking until after the routing is complete.
442 Exim scans the addresses that are assigned to local and remote
443 transports, and removes any duplicates. This means that more work will be
444 done, as duplicates will always all be routed, but duplicates are
445 presumably rare, so I don't expect this is of any significance.
447 For deliveries to pipes, files, and autoreplies, the duplicate checking
448 still happens during the routing process, since they are not going to be
451 PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
452 It corrects a timeout issue with spamd. This is Ian's comment: "The
453 background is that sometimes spamd either never reads data from a
454 connection it has accepted, or it never writes response data. The exiscan
455 spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
456 blindly assumes that writes won't block so it may never time out."
458 PH/39 Allow G after quota size as well as K and M.
460 PH/40 The value set for $authenticated_id in an authenticator may not contain
461 binary zeroes or newlines because the value is written to log lines and
462 to spool files. There was no check on this. Now the value is run through
463 the string_printing() function so that such characters are converted to
464 printable escape sequences.
466 PH/41 $message_linecount is a new variable that contains the total number of
467 lines in the message. Compare $body_linecount, which is the count for the
470 PH/42 Exim no longer gives details of delivery errors for specific addresses in
471 bounce and delay warning messages, except in certain special cases, which
474 (a) An SMTP error message from a remote host;
475 (b) A message specified in a :fail: redirection;
476 (c) A message specified in a "fail" command in a system filter;
477 (d) A message specified in a FAIL return from the queryprogram router;
478 (e) A message specified by the cannot_route_message router option.
480 In these cases only, Exim does include the error details in bounce and
481 warning messages. There are also a few cases where bland messages such
482 as "unrouteable address" or "local delivery error" are given.
484 PH/43 $value is now also set for the "else" part of a ${run expansion.
486 PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still
487 being worked on, but at least Exim now implements the latest version to
490 PH/45 In a pipe transport, although a timeout while waiting for the pipe
491 process to complete was treated as a delivery failure, a timeout while
492 writing the message to the pipe was logged, but erroneously treated as a
493 successful delivery. Such timeouts include transport filter timeouts. For
494 consistency with the overall process timeout, these timeouts are now
495 treated as errors, giving rise to delivery failures by default. However,
496 there is now a new Boolean option for the pipe transport called
497 timeout_defer, which, if set TRUE, converts the failures into defers for
498 both kinds of timeout. A transport filter timeout is now identified in
501 PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On
502 systems where "make" and "gmake" are different, calling "gmake" at top
503 level broke things. I've arranged for the value of $(MAKE) to be passed
504 from the Makefile to this script so that it can call the same version of
508 A note about Exim versions 4.44 and 4.50
509 ----------------------------------------
511 Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
512 changes of various kinds. As a consequence, a big documentation update was
513 needed. This delayed the release for rather longer than seemed good, especially
514 in the light of a couple of (minor) security issues. Therefore, the changes
515 that fixed bugs were backported into 4.43, to create a 4.44 maintenance
516 release. So 4.44 and 4.50 are in effect two different branches that both start
519 I have left the 4.50 change log unchanged; it contains all the changes since
520 4.43. The change log for 4.44 is below; many of its items are identical to
521 those for 4.50. This seems to be the most sensible way to preserve the
522 historical information.
528 1. Minor wording change to the doc/README.SIEVE file.
530 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
531 computation of the current number of files was incorrect.
533 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
534 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
537 4. Give more explanation in the error message when the command for a transport
538 filter fails to execute.
540 5. There are several places where Exim runs a non-Exim command in a
541 subprocess. The SIGUSR1 signal should be disabled for these processes. This
542 was being done only for the command run by the queryprogram router. It is
543 now done for all such subprocesses. The other cases are: ${run, transport
544 filters, and the commands run by the lmtp and pipe transports.
546 6. Added CONFIGURE_GROUP build-time option.
548 7. Some older OS have a limit of 256 on the maximum number of file
549 descriptors. Exim was using setrlimit() to set 1000 as a large value
550 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
551 systems. I've change it so that if it can't get 1000, it tries for 256.
553 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
554 was an oversight, and furthermore, ever since the addition of extra
555 controls (e.g. 4.43/32), the checks on when to allow different forms of
556 "control" were broken. There should now be diagnostics for all cases when a
557 control that does not make sense is encountered.
559 9. Added the /retain_sender option to "control=submission".
561 10. $recipients is now available in the predata ACL (oversight).
563 11. Tidy the search cache before the fork to do a delivery from a message
564 received from the command line. Otherwise the child will trigger a lookup
565 failure and thereby defer the delivery if it tries to use (for example) a
566 cached ldap connection that the parent has called unbind on.
568 12. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
569 of $address_data from the recipient verification was clobbered by the
572 13. The value of address_data from a sender verification is now available in
573 $sender_address_data in subsequent conditions in the ACL statement.
575 14. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
577 15. Added a new option "connect=<time>" to callout options, to set a different
580 16. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
581 was its contents. (It was OK if the option was not defined at all.)
583 17. A "Completed" log line is now written for messages that are removed from
584 the spool by the -Mrm option.
586 18. New variables $sender_verify_failure and $recipient_verify_failure contain
587 information about exactly what failed.
589 19. Added -dd to debug only the daemon process.
591 20. Incorporated Michael Haardt's patch to ldap.c for improving the way it
592 handles timeouts, both on the server side and network timeouts. Renamed the
593 CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
595 21. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
596 It is now set to "smtps".
598 22. $host_address is now set to the target address during the checking of
601 23. When checking ignore_target_hosts for an ipliteral router, no host name was
602 being passed; this would have caused $sender_host_name to have been used if
603 matching the list had actually called for a host name (not very likely,
604 since this list is usually IP addresses). A host name is now passed as
607 24. Changed the calls that set up the SIGCHLD handler in the daemon to use the
608 code that specifies a non-restarting handler (typically sigaction() in
609 modern systems) in an attempt to fix a rare and obscure crash bug.
611 25. Narrowed the window for a race in the daemon that could cause it to ignore
612 SIGCHLD signals. This is not a major problem, because they are used only to
613 wake it up if nothing else does.
615 26. A malformed maildirsize file could cause Exim to calculate negative values
616 for the mailbox size or file count. Odd effects could occur as a result.
617 The maildirsize information is now recalculated if the size or filecount
620 27. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
621 support for a long time. Removed HAVE_SYS_VFS_H.
623 28. Installed the latest version of exipick from John Jetmore.
625 29. In an address list, if the pattern was not a regular expression, an empty
626 subject address (from a bounce message) matched only if the pattern was an
627 empty string. Non-empty patterns were not even tested. This was the wrong
628 because it is perfectly reasonable to use an empty address as part of a
629 database query. An empty address is now tested by patterns that are
630 lookups. However, all the other forms of pattern expect the subject to
631 contain a local part and a domain, and therefore, for them, an empty
632 address still always fails if the pattern is not itself empty.
634 30. Exim went into a mad DNS loop when attempting to do a callout where the
635 host was specified on an smtp transport, and looking it up yielded more
638 31. Re-factored the code for checking spool and log partition space into a
639 function that finds that data and another that does the check. The former
640 is then used to implement four new variables: $spool_space, $log_space,
641 $spool_inodes, and $log_inodes.
643 32. The RFC2047 encoding function was originally intended for short strings
644 such as real names; it was not keeping to the 75-character limit for
645 encoded words that the RFC imposes. It now respects the limit, and
646 generates multiple encoded words if necessary. To be on the safe side, I
647 have increased the buffer size for the ${rfc2047: expansion operator from
650 33. It is now permitted to omit both strings after an "if" condition; if the
651 condition is true, the result is "true". As before, when the second string
652 is omitted, a false condition yields an empty string. This makes it less
653 cumbersome to write custom ACL and router conditions.
655 34. Failure to deliver a bounce message always caused it to be frozen, even if
656 there was an errors_to setting on the router. The errors_to setting is now
659 35. If an IPv6 address is given for -bh or -bhc, it is now converted to the
660 canonical form (fully expanded) before being placed in
661 $sender_host_address.
663 36. The table in the code that translates DNS record types into text (T_A to
664 "A" for instance) was missing entries for NS and CNAME. It is just possible
665 that this could have caused confusion if both these types were looked up
666 for the same domain, because the text type is used as part of Exim's
667 per-process caching. But the chance of anyone hitting this buglet seems
670 37. The dnsdb lookup has been extended in a number of ways.
672 (1) There is a new type, "zns", which walks up the domain tree until it
673 finds some nameserver records. It should be used with care.
675 (2) There is a new type, "mxh", which is like "mx" except that it returns
676 just the host names, not the priorities.
678 (3) It is now possible to give a list of domains (or IP addresses) to be
679 looked up. The behaviour when one of the lookups defers can be
680 controlled by a keyword.
682 (4) It is now possible to specify the separator character for use when
683 multiple records are returned.
685 38. The dnslists ACL condition has been extended: it is now possible to supply
686 a list of IP addresses and/or domains to be looked up in a particular DNS
689 39. Added log_selector=+queue_time_overall.
691 40. When running the queue in the test harness, wait just a tad after forking a
692 delivery process, to get repeatability of debugging output.
694 41. Include certificate and key file names in error message when GnuTLS fails
695 to set them up, because the GnuTLS error message doesn't include the name
696 of the failing file when there is a problem reading it.
698 42. Allow both -bf and -bF in the same test run.
700 43. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
702 44. The "Exiscan patch" is now merged into the mainline Exim source.
704 45. Sometimes the final signoff response after QUIT could fail to get
705 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
706 < 0 before doing a fflush(). This bug looks as though it goes back to the
707 introduction of TLS in release 3.20, but "sometimes" must have been rare
708 because the tests only now provoked it.
710 46. Reset the locale to "C" after calling embedded Perl, in case it was changed
711 (this can affect the format of dates).
713 47. exim_tidydb, when checking for the continued existence of a message for
714 which it has found a message-specific retry record, was not finding
715 messages that were in split spool directories. Consequently, it was
716 deleting retry records that should have stayed in existence.
718 48. Steve fixed some bugs in eximstats.
720 49. The SPA authentication driver was not abandoning authentication and moving
721 on to the next authenticator when an expansion was forced to fail,
722 contradicting the general specification for all authenticators. Instead it
723 was generating a temporary error. It now behaves as specified.
725 50. The default ordering of permitted cipher suites for GnuTLS was pessimal
726 (the order specifies the preference for clients). The order is now AES256,
727 AES128, 3DES, ARCFOUR128.
729 51. Small patch to Sieve code - explicitly set From: when generating an
732 52. Exim crashed if a remote delivery caused a very long error message to be
733 recorded - for instance if somebody sent an entire SpamAssassin report back
734 as a large number of 550 error lines. This bug was coincidentally fixed by
735 increasing the size of one of Exim's internal buffers (big_buffer) that
736 happened as part of the Exiscan merge. However, to be on the safe side, I
737 have made the code more robust (and fixed the comments that describe what
740 53. Now that there can be additional text after "Completed" in log lines (if
741 the queue_time_overall log selector is set), a one-byte patch to exigrep
742 was needed to allow it to recognize "Completed" as not the last thing in
745 54. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
746 patch that reportedly fixes this has been added. I am not expert enough to
747 create a test for it. This is what the patch creator wrote:
749 "I found a little strange behaviour of ldap code when working with
750 Windows 2003 AD Domain, where users was placed in more than one
751 Organization Units. When I tried to give exim partial DN, the exit code
752 of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
753 But simultaneously result of request was absolutely normal ldap result,
754 so I produce this patch..."
756 Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
757 REFERENCE, so I have modified the code to exclude the patch when that macro
760 55. Some experimental protocols are using DNS PTR records for new purposes. The
761 keys for these records are domain names, not reversed IP addresses. The
762 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
763 leaves it alone. Component reversal etc. now happens only for IP addresses.
766 56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
768 57. Double the size of the debug message buffer (to 2048) so that more of very
769 long debug lines gets shown.
771 58. The exicyclog utility now does better if the number of log files to keep
772 exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
774 59. Two changes related to the smtp_active_hostname option:
776 (1) $smtp_active_hostname is now available as a variable.
777 (2) The default for smtp_banner uses $smtp_active_hostname instead
778 of $primary_hostname.
780 60. The host_aton() function is supposed to be passed a string that is known
781 to be a valid IP address. However, in the case of IPv6 addresses, it was
782 not checking this. This is a hostage to fortune. Exim now panics and dies
783 if the condition is not met. A case was found where this could be provoked
784 from a dnsdb PTR lookup with an IPv6 address that had more than 8
785 components; fortuitously, this particular loophole had already been fixed
786 by change 4.50/55 above.
788 If there are any other similar loopholes, the new check in host_aton()
789 itself should stop them being exploited. The report I received stated that
790 data on the command line could provoke the exploit when Exim was running as
791 exim, but did not say which command line option was involved. All I could
792 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
796 61. There was a buffer overflow vulnerability in the SPA authentication code
797 (which came originally from the Samba project). I have added a test to the
798 spa_base64_to_bits() function which I hope fixes it.
801 62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
802 os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
804 63. The daemon start-up calls getloadavg() while still root for those OS that
805 need the first call to be done as root, but it missed one case: when
806 deliver_queue_load_max is set with deliver_drop_privilege. This is
807 necessary for the benefit of the queue runner, because there is no re-exec
808 when deliver_drop_privilege is set.
810 64. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
813 65. Caching of lookup data for "hosts =" ACL conditions, when a named host list
814 was in use, was not putting the data itself into the right store pool;
815 consequently, it could be overwritten for a subsequent message in the same
816 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
819 66. Added hosts_max_try_hardlimit to the smtp transport, default 50.
821 67. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
822 address", "IPv4 address", and "IPv6 address", respectively. Some calls of
823 the function were treating the return as a boolean value, which happened to
824 work because 0=false and not-0=true, but is not correct code.
826 68. The host_aton() function was not handling scoped IPv6 addresses (those
827 with, for example, "%eth0" on the end) correctly.
829 69. Fixed some compiler warnings in acl.c for the bitmaps specified with
830 negated items (that is, ~something) in unsigned ints. Some compilers
831 apparently mutter when there is no cast.
833 70. If an address verification called from an ACL failed, and did not produce a
834 user-specific message (i.e. there was only a "system" message), nothing was
835 put in $acl_verify_message. In this situation, it now puts the system
838 71. Change 4.23/11 added synchronization checking at the start of an SMTP
839 session; change 4.31/43 added the unwanted input to the log line - except
840 that it did not do this in the start of session case. It now does.
842 72. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
843 This is wrong and can cause the other end to generate a synchronization
844 error if it is another Exim or anything else that does the synchronization
845 check. A QUIT command is no longer sent after a timeout.
847 73. $host_lookup_deferred has been added, to make it easier to detect DEFERs
850 74. The defer_ok option of callout verification was not working if it was used
851 when verifying addresses in header lines, that is, for this case:
853 verify = header_sender/callout=defer_ok
855 75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
856 those file descriptors could be used for SMTP connections. If anything
857 wrote to stderr (the example that came up was "warn" in embedded Perl), it
858 could be sent to the SMTP client, causing chaos. The daemon now opens
859 stdin, stdout, and stderr to /dev/null when it puts itself into the
862 76. Arrange for output from Perl's "warn" command to be written to Exim's main
863 log by default. The user can override this with suitable Perl magic.
865 77. The use of log_message on a "discard" ACL verb, which is supposed to add to
866 the log message when discard triggers, was not working for the DATA ACL or
867 for the non-SMTP ACL.
869 78. Error message wording change in sieve.c.
871 79. If smtp_accept_max_per_host was set, the number of connections could be
872 restricted to fewer than expected, because the daemon was trying to set up
873 a new connection before checking whether the processes handling previous
874 connections had finished. The check for completed processes is now done
875 earlier. On busy systems, this bug wouldn't be noticed because something
876 else would have woken the daemon, and it would have reaped the completed
879 80. If a message was submitted locally by a user whose login name contained one
880 or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
881 It caused a spool format error. I have fixed the spool reading code. A
882 related problem was that the "from" clause in the Received: line became
883 illegal because of the space(s). It is now covered by ${quote_local_part.
885 81. Included the latest eximstats from Steve (adds average sizes to HTML Top
888 82. Updated OS/Makefile-AIX as per message from Mike Meredith.
890 83. Patch from Sieve maintainer to fix unterminated string problem in
893 84. Some minor changes to the Linux configuration files to help with other
894 OS variants using glibc.
896 85. One more patch for Sieve to update vacation handling to latest spec.
899 ----------------------------------------------------
900 See the note above about the 4.44 and 4.50 releases.
901 ----------------------------------------------------
907 1. Change 4.43/35 introduced a bug that caused file counts to be
908 incorrectly computed when quota_filecount was set in an appendfile
911 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
912 bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
915 3. Give more explanation in the error message when the command for a transport
916 filter fails to execute.
918 4. There are several places where Exim runs a non-Exim command in a
919 subprocess. The SIGUSR1 signal should be disabled for these processes. This
920 was being done only for the command run by the queryprogram router. It is
921 now done for all such subprocesses. The other cases are: ${run, transport
922 filters, and the commands run by the lmtp and pipe transports.
924 5. Some older OS have a limit of 256 on the maximum number of file
925 descriptors. Exim was using setrlimit() to set 1000 as a large value
926 unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
927 systems. I've change it so that if it can't get 1000, it tries for 256.
929 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
930 was an oversight, and furthermore, ever since the addition of extra
931 controls (e.g. 4.43/32), the checks on when to allow different forms of
932 "control" were broken. There should now be diagnostics for all cases when a
933 control that does not make sense is encountered.
935 7. $recipients is now available in the predata ACL (oversight).
937 8. Tidy the search cache before the fork to do a delivery from a message
938 received from the command line. Otherwise the child will trigger a lookup
939 failure and thereby defer the delivery if it tries to use (for example) a
940 cached ldap connection that the parent has called unbind on.
942 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
943 of $address_data from the recipient verification was clobbered by the
946 10. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
947 was its contents. (It was OK if the option was not defined at all.)
949 11. A "Completed" log line is now written for messages that are removed from
950 the spool by the -Mrm option.
952 12. $host_address is now set to the target address during the checking of
955 13. When checking ignore_target_hosts for an ipliteral router, no host name was
956 being passed; this would have caused $sender_host_name to have been used if
957 matching the list had actually called for a host name (not very likely,
958 since this list is usually IP addresses). A host name is now passed as
961 14. Changed the calls that set up the SIGCHLD handler in the daemon to use the
962 code that specifies a non-restarting handler (typically sigaction() in
963 modern systems) in an attempt to fix a rare and obscure crash bug.
965 15. Narrowed the window for a race in the daemon that could cause it to ignore
966 SIGCHLD signals. This is not a major problem, because they are used only to
967 wake it up if nothing else does.
969 16. A malformed maildirsize file could cause Exim to calculate negative values
970 for the mailbox size or file count. Odd effects could occur as a result.
971 The maildirsize information is now recalculated if the size or filecount
974 17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
975 support for a long time. Removed HAVE_SYS_VFS_H.
977 18. Updated exipick to current release from John Jetmore.
979 19. Allow an empty sender to be matched against a lookup in an address list.
980 Previously the only cases considered were a regular expression, or an
983 20. Exim went into a mad DNS lookup loop when doing a callout where the
984 host was specified on the transport, if the DNS lookup yielded more than
987 21. The RFC2047 encoding function was originally intended for short strings
988 such as real names; it was not keeping to the 75-character limit for
989 encoded words that the RFC imposes. It now respects the limit, and
990 generates multiple encoded words if necessary. To be on the safe side, I
991 have increased the buffer size for the ${rfc2047: expansion operator from
994 22. Failure to deliver a bounce message always caused it to be frozen, even if
995 there was an errors_to setting on the router. The errors_to setting is now
998 23. If an IPv6 address is given for -bh or -bhc, it is now converted to the
999 canonical form (fully expanded) before being placed in
1000 $sender_host_address.
1002 24. Updated eximstats to version 1.33
1004 25. Include certificate and key file names in error message when GnuTLS fails
1005 to set them up, because the GnuTLS error message doesn't include the name
1006 of the failing file when there is a problem reading it.
1008 26. Expand error message when OpenSSL has problems setting up cert/key files.
1011 27. Reset the locale to "C" after calling embedded Perl, in case it was changed
1012 (this can affect the format of dates).
1014 28. exim_tidydb, when checking for the continued existence of a message for
1015 which it has found a message-specific retry record, was not finding
1016 messages that were in split spool directories. Consequently, it was
1017 deleting retry records that should have stayed in existence.
1019 29. eximstats updated to version 1.35
1020 1.34 - allow eximstats to parse syslog lines as well as mainlog lines
1021 1.35 - bugfix such that pie charts by volume are generated correctly
1023 30. The SPA authentication driver was not abandoning authentication and moving
1024 on to the next authenticator when an expansion was forced to fail,
1025 contradicting the general specification for all authenticators. Instead it
1026 was generating a temporary error. It now behaves as specified.
1028 31. The default ordering of permitted cipher suites for GnuTLS was pessimal
1029 (the order specifies the preference for clients). The order is now AES256,
1030 AES128, 3DES, ARCFOUR128.
1032 31. Small patch to Sieve code - explicitly set From: when generating an
1035 32. Exim crashed if a remote delivery caused a very long error message to be
1036 recorded - for instance if somebody sent an entire SpamAssassin report back
1037 as a large number of 550 error lines. This bug was coincidentally fixed by
1038 increasing the size of one of Exim's internal buffers (big_buffer) that
1039 happened as part of the Exiscan merge. However, to be on the safe side, I
1040 have made the code more robust (and fixed the comments that describe what
1043 33. Some experimental protocols are using DNS PTR records for new purposes. The
1044 keys for these records are domain names, not reversed IP addresses. The
1045 dnsdb PTR lookup now tests whether its key is an IP address. If not, it
1046 leaves it alone. Component reversal etc. now happens only for IP addresses.
1049 34. The host_aton() function is supposed to be passed a string that is known
1050 to be a valid IP address. However, in the case of IPv6 addresses, it was
1051 not checking this. This is a hostage to fortune. Exim now panics and dies
1052 if the condition is not met. A case was found where this could be provoked
1053 from a dnsdb PTR lookup with an IPv6 address that had more than 8
1054 components; fortuitously, this particular loophole had already been fixed
1055 by change 4.50/55 or 4.44/33 above.
1057 If there are any other similar loopholes, the new check in host_aton()
1058 itself should stop them being exploited. The report I received stated that
1059 data on the command line could provoke the exploit when Exim was running as
1060 exim, but did not say which command line option was involved. All I could
1061 find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
1062 running as the user.
1065 35. There was a buffer overflow vulnerability in the SPA authentication code
1066 (which came originally from the Samba project). I have added a test to the
1067 spa_base64_to_bits() function which I hope fixes it.
1070 36. The daemon start-up calls getloadavg() while still root for those OS that
1071 need the first call to be done as root, but it missed one case: when
1072 deliver_queue_load_max is set with deliver_drop_privilege. This is
1073 necessary for the benefit of the queue runner, because there is no re-exec
1074 when deliver_drop_privilege is set.
1076 37. Caching of lookup data for "hosts =" ACL conditions, when a named host list
1077 was in use, was not putting the data itself into the right store pool;
1078 consequently, it could be overwritten for a subsequent message in the same
1079 SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
1082 38. Sometimes the final signoff response after QUIT could fail to get
1083 transmitted in the non-TLS case. Testing !tls_active instead of tls_active
1084 < 0 before doing a fflush(). This bug looks as though it goes back to the
1085 introduction of TLS in release 3.20, but "sometimes" must have been rare
1086 because the tests only now provoked it.
1092 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
1093 PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
1094 Now it returns an integer. A number of calls were still expecting a T/F
1095 return. Fortuitously, in all cases, the tests worked in OK situations,
1096 which is the norm. However, things would have gone wrong on any write
1097 failures on the smtp file descriptor. This function is used when sending
1098 messages over SMTP and also when doing verify callouts.
1100 2. When Exim is called to do synchronous delivery of a locally submitted
1101 message (the -odf or -odi options), it no longer closes stderr before doing
1104 3. Implemented the mua_wrapper option.
1106 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
1108 5. Implemented the functions header_remove(), header_testname(),
1109 header_add_at_position(), and receive_remove_recipient(), and exported them
1112 6. If an ACL "warn" statement specified the addition of headers, Exim already
1113 inserted X-ACL-Warn: at the start if there was no header name. However, it
1114 was not making this test for the second and subsequent header lines if
1115 there were newlines in the string. This meant that an invalid header could
1116 be inserted if Exim was badly configured.
1118 7. Allow an ACL "warn" statement to add header lines at the start or after all
1119 the Received: headers, as well as at the end.
1121 8. Added the rcpt_4xx retry error code.
1123 9. Added postmaster_mailfrom=xxx to callout verification option.
1125 10. Added mailfrom=xxxx to the callout verification option, for verify=
1128 11. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
1129 (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
1131 12. Inserted some casts to stop certain compilers warning when using pointer
1132 differences as field lengths or precisions in printf-type calls (mostly
1133 affecting debugging statements).
1135 13. Added optional readline() support for -be (dynamically loaded).
1137 14. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
1138 same clock tick as a message's arrival, so that its received time was the
1139 same as the "first fail" time on the retry record, and that message
1140 remained on the queue past the ultimate address timeout, every queue runner
1141 would try a delivery (because it was past the ultimate address timeout) but
1142 after another failure, the ultimate address timeout, which should have then
1143 bounced the address, did not kick in. This was a "< instead of <=" error;
1144 in most cases the first failure would have been in the next clock tick
1145 after the received time, and all would be well.
1147 15. The special items beginning with @ in domain lists (e.g. @mx_any) were not
1148 being recognized when the domain list was tested by the match_domain
1149 condition in an expansion string.
1151 16. Added the ${str2b64: operator.
1153 17. Exim was always calling setrlimit() to set a large limit for the number of
1154 processes, without checking whether the existing limit was already
1155 adequate. (It did check for the limit on file descriptors.) Furthermore,
1156 errors from getrlimit() and setrlimit() were being ignored. Now they are
1157 logged to the main and panic logs, but Exim does carry on, to try to do its
1158 job under whatever limits there are.
1160 18. Imported PCRE 5.0.
1162 19. Trivial typo in log message " temporarily refused connection" (the leading
1165 20. If the log selector return_path_on_delivery was set and an address was
1166 redirected to /dev/null, the delivery process crashed because it assumed
1167 that a return path would always be set for a "successful" delivery. In this
1168 case, the whole delivery is bypassed as an optimization, and therefore no
1171 21. Internal re-arrangement: the function for sending a challenge and reading
1172 a response while authentication was assuming a zero-terminated challenge
1173 string. It's now changed to take a pointer and a length, to allow for
1174 binary data in such strings.
1176 22. Added the cyrus_sasl authenticator (code supplied by MBM).
1178 23. Exim was not respecting finduser_retries when seeking the login of the
1179 uid under which it was called; it was always trying 10 times. (The default
1180 setting of finduser_retries is zero.) Also, it was sleeping after the final
1181 failure, which is pointless.
1183 24. Implemented tls_on_connect_ports.
1185 25. Implemented acl_smtp_predata.
1187 26. If the domain in control=submission is set empty, Exim assumes that the
1188 authenticated id is a complete email address when it generates From: or
1189 Sender: header lines.
1191 27. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
1192 definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
1193 chown and chgrp in /bin and hostname in /usr/bin.
1195 28. Exim was keeping the "process log" file open after each use, just as it
1196 does for the main log. This opens the possibility of it remaining open for
1197 long periods when the USR1 signal hits a daemon. Occasional processlog
1198 errors were reported, that could have been caused by this. Anyway, it seems
1199 much more sensible not to leave this file open at all, so that is what now
1202 29. The long-running daemon process does not normally write to the log once it
1203 has entered its main loop, and it closes the log before doing so. This is
1204 so that log files can straightforwardly be renamed and moved. However,
1205 there are a couple of unusual error situations where the daemon does write
1206 log entries, and I had neglected to close the log afterwards.
1208 30. The text of an SMTP error response that was received during a remote
1209 delivery was being truncated at 512 bytes. This is too short for some of
1210 the long messages that one sometimes sees. I've increased the limit to
1213 31. It is now possible to make retry rules that apply only when a message has a
1214 specific sender, in particular, an empty sender.
1216 32. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
1217 it possible to be selective about when SMTP synchronization is enforced.
1219 33. Added "control = caseful_local_part" and "control = "caselower_local_part".
1221 32. Implemented hosts_connection_nolog.
1223 33. Added an ACL for QUIT.
1225 34. Setting "delay_warning=" to disable warnings was not working; it gave a
1228 35. Added mailbox_size and mailbox_filecount to appendfile.
1230 36. Added control = no_multiline_responses to ACLs.
1232 37. There was a bug in the logic of the code that waits for the clock to tick
1233 in the case where the clock went backwards by a substantial amount such
1234 that the microsecond fraction of "now" was more than the microsecond
1235 fraction of "then" (but the whole seconds number was less).
1237 38. Added support for the libradius Radius client library this is found on
1238 FreeBSD (previously only the radiusclient library was supported).
1244 1. When certain lookups returned multiple values in the form name=value, the
1245 quoting of the values was not always being done properly. Specifically:
1246 (a) If the value started with a double quote, but contained no whitespace,
1248 (b) If the value contained whitespace other than a space character (i.e.
1249 tabs or newlines or carriage returns) it was not quoted.
1250 This fix has been applied to the mysql and pgsql lookups by writing a
1251 separate quoting function and calling it from the lookup code. The fix
1252 should probably also be applied to nisplus, ibase and oracle lookups, but
1253 since I cannot test any of those, I have not disturbed their existing code.
1255 2. A hit in the callout cache for a specific address caused a log line with no
1256 reason for rejecting RCPT. Now it says "Previous (cached) callout
1257 verification failure".
1259 3. There was an off-by-one bug in the queryprogram router. An over-long
1260 return line was truncated at 256 instead of 255 characters, thereby
1261 overflowing its buffer with the terminating zero. As well as fixing this, I
1262 have increased the buffer size to 1024 (and made a note to document this).
1264 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
1265 when Exim is waiting for an SMTP response from a remote server, Exim
1266 restarts its select() call on the socket, thereby resetting its timeout.
1267 This is not a problem when such interrupts are rare. Somebody set up a cron
1268 job to run exiwhat every 2 minutes, which is less than the normal select()
1269 timeout (5 or 10 minutes). This meant that the select() timeout never
1270 kicked in because it was always reset. I have fixed this by comparing the
1271 time when an interrupt arrives with the time at the start of the first call
1272 to select(). If more time than the timeout has elapsed, the interrupt is
1273 treated as a timeout.
1275 5. Some internal re-factoring in preparation for the addition of Sieve
1276 extensions (by MH). In particular, the "personal" test is moved to a
1277 separate function, and given an option for scanning Cc: and Bcc: (which is
1278 not set for Exim filters).
1280 6. When Exim created an email address using the login of the caller as the
1281 local part (e.g. when creating a From: or Sender: header line), it was not
1282 quoting the local part when it contained special characters such as @.
1284 7. Installed new OpenBSD configuration files.
1286 8. Reworded some messages for syntax errors in "and" and "or" conditions to
1287 try to make them clearer.
1289 9. Callout options, other than the timeout value, were being ignored when
1290 verifying sender addresses in header lines. For example, when using
1292 verify = header_sender/callout=no_cache
1294 the cache was (incorrectly) being used.
1296 10. Added a missing instance of ${EXE} to the exim_install script; this affects
1297 only the Cygwin environment.
1299 11. When return_path_on_delivery was set as a log selector, if different remote
1300 addresses in the same message used different return paths and parallel
1301 remote delivery occurred, the wrong values would sometimes be logged.
1302 (Whenever a remote delivery process finished, the return path value from
1303 the most recently started remote delivery process was logged.)
1305 12. RFC 3848 specifies standard names for the "with" phrase in Received: header
1306 lines when AUTH and/or TLS are in use. This is the "received protocol"
1307 field. Exim used to use "asmtp" for authenticated SMTP, without any
1308 indication (in the protocol name) for TLS use. Now it follows the RFC and
1309 uses "esmtpa" if the connection is authenticated, "esmtps" if it is
1310 encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
1311 names appear in log lines as well as in Received: header lines.
1313 13. Installed MH's patches for Sieve to add the "copy" and "vacation"
1314 extensions, and comparison tests, and to fix some bugs.
1316 14. Changes to the "personal" filter test:
1318 (1) The test was buggy in that it was just doing the equivalent of
1319 "contains" tests on header lines. For example, if a user's address was
1320 anne@some.where, the "personal" test would incorrectly be true for
1322 To: susanne@some.where
1324 This test is now done by extracting each address from the header in turn,
1325 and checking the entire address. Other tests that are part of "personal"
1326 are now done using regular expressions (for example, to check local parts
1327 of addresses in From: header lines).
1329 (2) The list of non-personal local parts in From: addresses has been
1330 extended to include "listserv", "majordomo", "*-request", and "owner-*",
1331 taken from the Sieve specification recommendations.
1333 (3) If the message contains any header line starting with "List-" it is
1334 treated as non-personal.
1336 (4) The test for "circular" in the Subject: header line has been removed
1337 because it now seems ill-conceived.
1339 15. Minor typos in src/EDITME comments corrected.
1341 16. Installed latest exipick from John Jetmore.
1343 17. If headers_add on a router specified a text string that was too long for
1344 string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
1345 of string_sprintf() is now avoided.
1347 18. $message_body_size was not set (it was always zero) when running the DATA
1348 ACL and the local_scan() function.
1350 19. For the "mail" command in an Exim filter, no default was being set for
1351 the once_repeat time, causing a random time value to be used if "once" was
1352 specified. (If the value happened to be <= 0, no repeat happened.) The
1353 default is now 0s, meaning "never repeat". The "vacation" command was OK
1354 (its default is 7d). It's somewhat surprising nobody ever noticed this bug
1355 (I found it when inspecting the code).
1357 20. There is now an overall timeout for performing a callout verification. It
1358 defaults to 4 times the callout timeout, which applies to individual SMTP
1359 commands during the callout. The overall timeout applies when there is more
1360 than one host that can be tried. The timeout is checked before trying the
1361 next host. This prevents very long delays if there are a large number of
1362 hosts and all are timing out (e.g. when the network connections are timing
1363 out). The value of the overall timeout can be changed by specifying an
1364 additional sub-option for "callout", called "maxwait". For example:
1366 verify = sender/callout=5s,maxwait=20s
1368 21. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
1369 to the end before writing, but this should make it even safer).
1371 22. Exim was forgetting that it had advertised PIPELINING for the second and
1372 subsequent messages on an SMTP connection. It was also not resetting its
1373 memory on STARTTLS and an internal HELO.
1375 23. When Exim logs an SMTP synchronization error within a session, it now
1376 records whether PIPELINING has been advertised or not.
1378 24. Added 3 instances of "(long int)" casts to time_t variables that were being
1379 formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
1380 rather than long int.
1382 25. Installed the latest Cygwin configuration files from the Cygwin maintainer.
1384 26. Added the never_mail option to autoreply.
1390 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
1391 crash if the getsockname() call failed; this can happen if a connection is
1392 closed very soon after it is established. The problem was simply in the
1393 order in which certain operations were done, causing Exim to try to write
1394 to the SMTP stream before it had set up the file descriptor. The bug has
1395 been fixed by making things happen in the correct order.
1401 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
1402 before the connection was closed, thus losing the rejection response.
1404 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
1405 some early Solaris releases, but causes trouble in current releases where
1406 socklen_t is defined.
1408 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
1411 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
1414 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
1415 that releasing the top of it at the end releases what was used for sub-
1416 expansions (unless the block got too big). However, discard this block if
1417 the first thing is a variable or header, so that we can use its block when
1418 it is dynamic (useful for very large $message_headers, for example).
1420 6. Lookups now cache *every* query, not just the most recent. A new, separate
1421 store pool is used for this. It can be recovered when all lookup caches are
1422 flushed. Lookups now release memory at the end of their result strings.
1423 This has involved some general refactoring of the lookup sources.
1425 7. Some code has been added to the store_xxx() functions to reduce the amount
1426 of flapping under certain conditions.
1428 8. log_incoming_interface used to affect only the <= reception log lines. Now
1429 it causes the local interface and port to be added to several more SMTP log
1430 lines, for example "SMTP connection from", and rejection lines.
1432 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
1434 10. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
1436 11. If $host_data was set by virtue of a hosts lookup in an ACL, its value
1437 could be overwritten at the end of the current message (or the start of a
1438 new message if it was set in a HELO ACL). The value is now preserved for
1439 the duration of the SMTP connection.
1441 12. If a transport had a headers_rewrite setting, and a matching header line
1442 contained an unqualified address, that address was qualified, even if it
1443 did not match any rewriting rules. The underlying bug was that the values
1444 of the flags that permit the existence of unqualified sender and recipient
1445 addresses in header lines (set by {sender,recipient}_unqualified_hosts for
1446 non-local messages, and by -bnq for local messages) were not being
1447 preserved with the message after it was received.
1449 13. When Exim was logging an SMTP synchronization error, it could sometimes log
1450 "next input=" as part of the text comprising the host identity instead of
1451 the correct text. The code was using the same buffer for two different
1452 strings. However, depending on which order the printing function evaluated
1453 its arguments, the bug did not always show up. Under Linux, for example, my
1454 test suite worked just fine.
1456 14. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
1457 doesn't work with some older versions of Perl. It has been changed to "my",
1458 which in any case is probably the better facility to use.
1460 15. A really picky compiler found some instances of statements for creating
1461 error messages that either had too many or two few arguments for the format
1464 16. The size of the buffer for calls to the DNS resolver has been increased
1465 from 1024 to 2048. A larger buffer is needed when performing PTR lookups
1466 for addresses that have a lot of PTR records. This alleviates a problem; it
1467 does not fully solve it.
1469 17. A dnsdb lookup for PTR records that receives more data than will fit in the
1470 buffer now truncates the list and logs the incident, which is the same
1471 action as happens when Exim is looking up a host name and its aliases.
1472 Previously in this situation something unpredictable would happen;
1473 sometimes it was "internal error: store_reset failed".
1475 18. If a server dropped the connection unexpectedly when an Exim client was
1476 using GnuTLS and trying to read a response, the client delivery process
1477 crashed while trying to generate an error log message.
1479 19. If a "warn" verb in an ACL added multiple headers to a message in a single
1480 string, for example:
1482 warn message = H1: something\nH2: something
1484 the text was added as a single header line from Exim's point of view
1485 though it ended up OK in the delivered message. However, searching for the
1486 second and subsequent header lines using $h_h2: did not work. This has been
1487 fixed. Similarly, if a system filter added multiple headers in this way,
1488 the routers could not see them.
1490 20. Expanded the error message when iplsearch is called with an invalid key to
1491 suggest using net-iplsearch in a host list.
1493 21. When running tests using -bh, any delays imposed by "delay" modifiers in
1494 ACLs are no longer actually imposed (and a message to that effect is
1497 22. If a "gecos" field in a passwd entry contained escaped characters, in
1498 particular, if it contained a \" sequence, Exim got it wrong when building
1499 a From: or a Sender: header from that name. A second bug also caused
1500 incorrect handling when an unquoted " was present following a character
1501 that needed quoting.
1503 23. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
1504 was not being matched caselessly.
1506 24. Arranged for all hyphens in the exim.8 source to be escaped with
1509 25. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
1510 properly. Recipient callout cache records were still being keyed to include
1511 the sender, even when use_sender was set false. This led to far more
1512 callouts that were necessary. The sender is no longer included in the key
1513 when use_sender is false.
1515 26. Added "control = submission" modifier to ACLs.
1517 27. Added the ${base62d: operator to decode base 62 numbers.
1519 28. dnsdb lookups can now access SRV records.
1521 29. CONFIGURE_OWNER can be set at build time to define an alternative owner for
1522 the configuration file.
1524 30. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
1525 (-v) mode. This makes the output for a verbose queue run more intelligible.
1527 31. Added a use_postmaster feature to recipient callouts.
1529 32. Added the $body_zerocount variable, containing the number of binary zero
1530 bytes in the message body.
1532 33. The time of last modification of the "new" subdirectory is now used as the
1533 "mailbox time last read" when there is a quota error for a maildir
1536 34. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
1538 35. Added +ignore_unknown as a special item in host lists.
1540 36. Code for decoding IPv6 addresses in host lists is now included, even if
1541 IPv6 support is not being compiled. This fixes a bug in which an IPv6
1542 address was recognized as an IP address, but was then not correctly decoded
1543 into binary, causing unexpected and incorrect effects when compared with
1550 1. Very minor rewording of debugging text in manualroute to say "list of
1551 hosts" instead of "hostlist".
1553 2. If verify=header_syntax was set, and a header line with an unqualified
1554 address (no domain) and a large number of spaces between the end of the
1555 name and the colon was received, the reception process suffered a buffer
1556 overflow, and (when I tested it) crashed. This was caused by some obsolete
1557 code that should have been removed. The fix is to remove it!
1559 3. When running in the test harness, delay a bit after writing a bounce
1560 message to get a bit more predictability in the log output.
1562 4. Added a call to search_tidyup() just before forking a reception process. In
1563 theory, someone could use a lookup in the expansion of smtp_accept_max_
1564 per_host which, without the tidyup, could leave open a database connection.
1566 5. Added the variables $recipient_data and $sender_data which get set from a
1567 lookup success in an ACL "recipients" or "senders" condition, or a router
1568 "senders" option, similar to $domain_data and $local_part_data.
1570 6. Moved the writing of debug_print from before to after the "senders" test
1573 7. Change 4.31/66 (moving the time when the Received: is generated) caused
1574 problems for message scanning, either using a data ACL, or using
1575 local_scan() because the Received: header was not generated till after they
1576 were called (in order to set the time as the time of reception completion).
1577 I have revised the way this works. The header is now generated after the
1578 body is received, but before the ACL or local_scan() are called. After they
1579 are run, the timestamp in the header is updated.
1585 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
1586 before starting a queue runner without re-exec. This happened only when
1587 deliver_drop_privilege was set or when the Exim user was set to root. The
1588 effect of the bug was that timeouts during subsequent deliveries caused
1589 crashes instead of being properly handled. The handler is now left at its
1590 default (and expected) setting.
1592 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
1593 message, again when deliver_drop_privilege is set or Exim is run as root.
1594 The bug described in (1) was not present in this case, but the tidying up
1595 of the other signals was missing. I have made the two cases consistent.
1597 3. The ignore_target_hosts setting on a manualroute router was being ignored
1598 for hosts that were looked up using the /MX notation.
1600 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
1603 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
1604 operated on the sender address. After changing the $sender_address to <>
1605 for the sender address verify, Exim was re-instated it as the original
1606 (before rewriting) address, but remembering that it had rewritten it, so it
1607 wasn't rewriting it again. This bug also had the effect of breaking the
1608 sender address verification caching when the sender address was rewritten.
1610 6. The ignore_target_hosts option was being ignored by the ipliteral router.
1611 This has been changed so that if the ip literal address matches
1612 ignore_target_hosts, the router declines.
1614 7. Added expansion conditions match_domain, match_address, and match_local_
1615 part (NOT match_host).
1617 8. The placeholder for the Received: header didn't have a length field set.
1619 9. Added code to Exim itself and to exim_lock to test for a specific race
1620 condition that could lead to file corruption when using MBX delivery. The
1621 issue is with the lockfile that is created in /tmp. If this file is removed
1622 after a process has opened it but before that process has acquired a lock,
1623 there is the potential for a second process to recreate the file and also
1624 acquire a lock. This could lead to two Exim processes writing to the file
1625 at the same time. The added code performs the same test as UW imapd; it
1626 checks after acquiring the lock that its file descriptor still refers to
1627 the same named file.
1629 10. The buffer for building added header lines was of fixed size, 8192 bytes.
1630 It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
1633 11. Added the smtp_active_hostname option. If used, this will typically be made
1634 to depend on the incoming interface address. Because $interface_address is
1635 not set up until the daemon has forked a reception process, error responses
1636 that can happen earlier (such as "too many connections") no longer contain
1639 12. If an expansion in a condition on a "warn" statement fails because a lookup
1640 defers, the "warn" statement is abandoned, and the next ACL statement is
1641 processed. Previously this caused the whole ACL to be aborted.
1643 13. Added the iplsearch lookup type.
1645 14. Added ident_timeout as a log selector.
1647 15. Added tls_certificate_verified as a log selector.
1649 16. Added a global option tls_require_ciphers (compare the smtp transport
1650 option of the same name). This controls incoming TLS connections.
1652 17. I finally figured out how to make tls_require_ciphers do a similar thing
1653 in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
1654 before starting the TLS session.
1656 18. Tabs are now shown as \t in -bP output.
1658 19. If the log selector return_path_on_delivery was set, Exim crashed when
1659 bouncing a message because it had too many Received: header lines.
1661 20. If two routers both had headers_remove settings, and the first one included
1662 a superfluous trailing colon, the final name in the first list and the
1663 first name in the second list were incorrectly joined into one item (with a
1664 colon in the middle).
1670 1. Added -C and -D options to the exinext utility, mainly to make it easier
1671 to include in the automated testing, but these could be helpful when
1672 multiple configurations are in use.
1674 2. The exinext utility was not formatting the output nicely when there was
1675 an alternate port involved in the retry record key, nor when there was a
1676 message id as well (for retries that were specific to a specific message
1677 and a specific host). It was also confused by IPv6 addresses, because of
1678 the additional colons they contain. I have fixed the IPv4 problem, and
1679 patched it up to do a reasonable job for IPv6.
1681 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
1682 delivery, the log line now contains "pipelined" if PIPELINING was used.
1684 4. An SMTP transport process used to panic and die if the bind() call to set
1685 an explicit outgoing interface failed. This has been changed; it is now
1686 treated in the same way as a connect() failure.
1688 5. A reference to $sender_host_name in the part of a conditional expansion
1689 that was being skipped was still causing a DNS lookup. This no longer
1692 6. The def: expansion condition was not recognizing references to header lines
1693 that used bh_ and bheader_.
1695 7. Added the _cache feature to named lists.
1697 8. The code for checking quota_filecount in the appendfile transport was
1698 allowing one more file than it should have been.
1700 9. For compatibility with Sendmail, the command line option
1708 and sets the incoming protocol and host name (for trusted callers). The
1709 host name and its colon can be omitted when only the protocol is to be set.
1710 Note the Exim already has two private options, -pd and -ps, that refer to
1711 embedded Perl. It is therefore impossible to set a protocol value of "d" or
1712 "s", but I don't think that's a major issue.
1714 10. A number of refactoring changes to the code, none of which should affect
1717 (a) The number of logging options was getting close to filling up the
1718 32-bit word that was used as a bit map. I have split them into two classes:
1719 those that are passed in the argument to log_write(), and those that are
1720 only ever tested independently outside of that function. These are now in
1721 separate 32-bit words, so there is plenty of room for expansion again.
1722 There is no change in the user interface or the logging behaviour.
1724 (b) When building, for example, log lines, the code previously used a
1725 macro that called string_cat() twice, in order to add two strings. This is
1726 not really sufficiently general. Furthermore, there was one instance where
1727 it was actually wrong because one of the argument was used twice, and in
1728 one call a function was used. (As it happened, calling the function twice
1729 did not affect the overall behaviour.) The macro has been replaced by a
1730 function that can join an arbitrary number of extra strings onto a growing
1733 (c) The code for expansion conditions now uses a table and a binary chop
1734 instead of a serial search (which was left over from when there were very
1735 few conditions). Also, it now recognizes conditions like "pam" even when
1736 the relevant support is not compiled in: a suitably worded error message is
1737 given if an attempt is made to use such a condition.
1739 11. Added ${time_interval:xxxxx}.
1741 12. A bug was causing one of the ddress fields not to be passed back correctly
1742 from remote delivery subprocesses. The field in question was not being
1743 subsequently used, so this caused to problems in practice.
1745 13. Added new log selectors queue_time and deliver_time.
1747 14. Might have fixed a bug in maildirsizefile handling that threw up
1748 "unexpected character" debug warnings, and recalculated the data
1749 unnecessarily. In any case, I expanded the warning message to give more
1752 15. Added the message "Restricted characters in address" to the statements in
1753 the default ACL that block characters like @ and % in local parts.
1755 16. Change 71 for release 4.31 proved to be much less benign that I imagined.
1756 Three changes have been made:
1758 (a) There was a serious bug; a negative response to MAIL caused the whole
1759 recipient domain to be cached as invalid, thereby blocking all messages
1760 to all local parts at the same domain, from all senders. This bug has
1761 been fixed. The domain is no longer cached after a negative response to
1762 MAIL if the sender used is not empty.
1764 (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
1767 (c) A new callout option, "use_sender" has been added for people who want
1768 the modified behaviour.
1774 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
1777 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
1778 indeed breaks things for older releases.
1780 3. Added additional logging to the case where there is a problem reading data
1781 from a filter that is running in a subprocess using a pipe, in order to
1782 try to track down a specific problem.
1784 4. Testing facility fudge: when running in the test harness and attempting
1785 to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
1786 getting "No route to host". Convert this to a timeout.
1788 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
1791 6. Some OS don't have socklen_t but use size_t instead. This affects the
1792 fifth argument of getsockopt() amongst other things. This is now
1793 configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
1794 can be set for individual OS. I have set it for SunOS5, OSF1, and
1795 Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
1796 some earlier ones do not.
1798 7. Change 4.30/15 was not doing the test caselessly.
1800 8. The standard form for an IPv6 address literal was being rejected by address
1801 parsing in, for example, MAIL and RCPT commands. An example of this kind of
1802 address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
1803 this, as well as the form without the "IPv6" on the front (but only when
1804 address literals are enabled, of course).
1806 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
1808 10. Exim crashed if a message with an empty sender address specified by -f
1809 encountered a router with an errors_to setting. This could be provoked only
1810 by a command such as
1814 where an empty string was supplied; "<>" did not hit this bug.
1816 11. Installed PCRE release 4.5.
1818 12. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
1819 remained set. It is now erased.
1821 13. exiqgrep wasn't working on MacOS X because it didn't correctly compute
1822 times from message ids (which are base 36 rather than the normal 62).
1824 14. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
1825 were being counted as actual protocol errors, and logged if the log
1826 selector +smtp_protocol_error was set. One cannot be perfect in this test,
1827 but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
1828 and DATA following a set of rejected RCPTs do not count as protocol errors.
1829 In other words, Exim assumes they were pipelined, though this may not
1830 actually be the case. Of course, in all cases the client gets an
1831 appropriate error code.
1833 15. If a lookup fails in an ACL condition, a message about the failure may
1834 be available; it is used if testing the ACL cannot continue, because most
1835 such messages specify what the cause of the deferral is. However, some
1836 messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
1837 that caused an old message to be retained and used if a later statement
1838 caused a defer, replacing the real cause of the deferral.
1840 16. If an IP address had so many PTR records that the DNS lookup buffer
1841 was not large enough to hold them, Exim could crash while trying to process
1842 the truncated data. It now detects and logs this case.
1844 17. Further to 4.21/58, another change has been made: if (and only if) the
1845 first line of a message (the first header line) ends with CRLF, a bare LF
1846 in a subsequent header line has a space inserted after it, so as not to
1847 terminate the header.
1849 18. Refactoring: tidied an ugly bit of code in appendfile that copied data
1850 unnecessarily, used atoi() instead of strtol(), and didn't check the
1851 termination when getting file sizes from file names by regex.
1853 19. Completely re-implemented the support for maildirsize files, in the light
1854 of a number of problems with the previous contributed implementation
1855 (4.30/29). In particular:
1857 . If the quota is zero, the maildirsize file is maintained, but no quota is
1860 . If the maildir directory does not exist, it is created before any attempt
1861 to write a maildirsize file.
1863 . The quota value in the file is just a cache; if the quota is changed in
1864 the transport, the new value overrides.
1866 . A regular expression is available for excluding directories from the
1869 20. The autoreply transport checks the characters in options that define the
1870 message's headers; it allows continued headers, but it was checking with
1871 isspace() after an embedded newline instead of explicitly looking for a
1874 21. If all the "regular" hosts to which an address was routed had passed their
1875 expiry times, and had not reached their retry times, the address was
1876 bounced, even if fallback hosts were defined. Now Exim should go on to try
1879 22. Increased buffer sizes in the callout code from 1024 to 4096 to match the
1880 equivalent code in the SMTP transport. Some hosts send humungous responses
1881 to HELO/EHLO, more than 1024 it seems.
1883 23. Refactoring: code in filter.c used (void *) for "any old type" but this
1884 gives compiler warnings in some environments. I've now done it "properly",
1887 24. The replacement for inet_ntoa() that is used with gcc on IRIX systems
1888 (because of problems with the built-in one) was declared to return uschar *
1889 instead of char *, causing compiler failure.
1891 25. Fixed a file descriptor leak when processing alias/forward files.
1893 26. Fixed a minor format string issue in dbfn.c.
1895 27. Typo in exim.c: ("dmbnz" for "dbmnz").
1897 28. If a filter file refered to $h_xxx or $message_headers, and the headers
1898 contained RFC 2047 "words", Exim's memory could, under certain conditions,
1901 29. When a sender address is verified, it is cached, to save repeating the test
1902 when there is more than one recipient in a message. However, when the
1903 verification involves a callout, it is possible for different callout
1904 options to be set for different recipients. It is too complicated to keep
1905 track of this in the cache, so now Exim always runs a verification when a
1906 callout is required, relying on the callout cache for the optimization.
1907 The overhead is duplication of the address routing, but this should not be
1910 30. Fixed a bug in callout caching. If a RCPT command caused the sender address
1911 to be verified with callout=postmaster, and the main callout worked but the
1912 postmaster check failed, the verification correctly failed. However, if a
1913 subsequent RCPT command asked for sender verification *without* the
1914 postmaster check, incorrect caching caused this verification also to fail,
1917 31. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
1918 it was not caching the DNS options (qualify_single, search_parents) that
1919 were used when the lookup failed. A subsequent lookup with different
1920 options therefore always gave the same answer, though there were cases
1921 where it should not have. (Example: a "domains = !$mx_any" option on a
1922 dnslookup router: the "domains" option is always processed without any
1923 widening, but the router might have qualify_single set.) Now Exim uses the
1924 cached value only when the same options are set.
1926 32. Added John Jetmore's "exipick" utility to the distribution.
1928 33. GnuTLS: When an attempt to start a TLS session fails for any reason other
1929 than a timeout (e.g. a certificate is required, and is not provided), an
1930 Exim server now closes the connection immediately. Previously it waited for
1931 the client to close - but if the client is SSL, it seems that they each
1932 wait for each other, leading to a delay before one of them times out.
1934 34: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
1935 maintained 0.8.x compatibility because I don't think many are using it, and
1936 it is clearly obsolete.
1938 35. Added TLS support for CRLs: a tls_crl global option and one for the smtp
1941 36. OpenSSL: $tls_certificate_verified was being set to 1 even if the
1942 client certificate was expired. A simple patch fixes this, though I don't
1943 understand the full logic of why the verify callback is called multiple
1946 37. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
1947 Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
1948 which causes problems with some clients (such as the Certicom SSL Plus
1949 library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
1950 disables the coutermeasure allowing Eudora to connect."
1952 38. Exim was not checking that a write() to a log file succeeded. This could
1953 lead to Bad Things if a log got too big, in particular if it hit a file
1954 size limit. Exim now panics and dies if it cannot write to a log file, just
1955 as it does if it cannot open a log file.
1957 39. Modified OS/Makefile-Linux so that it now contains
1959 CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
1961 The two -D definitions ensure that Exim is compiled with large file
1962 support, which makes it possible to handle log files that are bigger than
1965 40. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
1966 instance) a domain was checked against a named list that involved a lookup,
1967 causing $domain_data to be set, then another domain was checked against the
1968 same list, then the first domain was re-checked, the value of $domain_data
1969 after the final check could be wrong. In particular, if the second check
1970 failed, it could be set empty. This bug probably also applied to
1973 41. The strip_trailing_dot option was not being applied to the address given
1974 with the -f command-line option.
1976 42. The code for reading a message's header from the spool was incrementing
1977 $received_count, but never initializing it. This meant that the value was
1978 incorrect (doubled) while delivering a message in the same process in which
1979 it was received. In the most common configuration of Exim, this never
1980 happens - a fresh exec is done - but it can happen when
1981 deliver_drop_privilege is set.
1983 43. When Exim logs an SMTP synchronization error - client data sent too soon -
1984 it now includes up to 150 characters of the unexpected data in the log
1987 44. The exim_dbmbuild utility uses fixed size buffers for reading input lines
1988 and building data strings. The size of both of these buffers was 10 000
1989 bytes - far larger than anybody would *ever* want, thought I. Needless to
1990 say, somebody hit the limit. I have increased the maximum line length to
1991 20 000 and the maximum data length of concatenated lines to 100 000. I have
1992 also fixed two bugs, because there was no checking on these buffers. Tsk,
1993 tsk. Now exim_dbmbuild gives a message and exits with an error code if a
1994 buffer is too small.
1996 45. The exim_dbmbuild utility did not support quoted keys, as Exim does in
1997 lsearch lookups. Now it does.
1999 46. When parsing a route_list item in a manualroute router, a fixed-length
2000 buffer was used for the list of hosts. I made this 1024 bytes long,
2001 thinking that nobody would ever have a list of hosts that long. Wrong.
2002 Somebody had a whole pile of complicated expansion conditions, and the
2003 string was silently truncated, leading to an expansion error. It turns out
2004 that it is easier to change to an unlimited length (owing to other changes
2005 that have happened since this code was originally written) than to build
2006 structure for giving a limitation error. The length of the item that
2007 expands into the list of hosts is now unlimited.
2009 47. The lsearch lookup could not handle data where the length of text line was
2010 more than 4095 characters. Such lines were truncated, leading to shortened
2011 data being returned. It should now handle lines of any length.
2013 48. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
2014 xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
2017 49. Cosmetic tidy to scripts like exicyclog that are generated by globally
2018 replacing strings such as BIN_DIRECTORY in a source file: the replacement
2019 no longer happens in comment lines. A list of replacements is now placed
2020 at the head of all of the source files, except those whose only change is
2021 to replace PERL_COMMAND in the very first #! line.
2023 50. Replaced the slow insertion sort in queue.c, for sorting the list of
2024 messages on the queue, with a bottom-up merge sort, using code contributed
2025 by Michael Haardt. This should make operations like -bp somewhat faster on
2026 large queues. It won't affect queue runners, except when queue_run_in_order
2029 51. Installed eximstats 1.31 in the distribution.
2031 52. Added support for SRV lookups to the dnslookup router.
2033 53. If an ACL referred to $message_body or $message_body_end, the value was not
2034 reset for any messages that followed in the same SMTP session.
2036 54. The store-handling optimization for building very long strings was not
2037 differentiating between the different store pools. I don't think this
2038 actually made any difference in practice, but I've tidied it.
2040 55. While running the routers to verify a sender address, $sender_address
2041 was still set to the sender address. This is wrong, because when routing to
2042 send a bounce to the sender, it would be empty. Therefore, I have changed
2043 it so that, while verifying a sender address, $sender_address is set to <>.
2044 (There is no change to what happens when verifying a recipient address.)
2046 56. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
2047 target A or AAAA records (if not already returned) without resetting the
2048 qualify_single or search_parents options of the DNS resolver. These are
2049 inappropriate in this case because the targets of MX and SRV records must
2050 be FQDNs. A broken DNS record could cause trouble if it happened to have a
2051 target that, when qualified, matched something in the local domain. These
2052 two options are now turned off when doing these lookups.
2054 57. It seems that at least some releases of Reiserfs (which does not have the
2055 concept of a fixed number of inodes) returns zero and not -1 for the
2056 number of available inodes. This interacted badly with check_spool_inodes,
2057 which assumed that -1 was the "no such thing" setting. What I have done is
2058 to check that the total number of inodes is greater than zero before doing
2059 the test of how many are available.
2061 58. When a "warn" ACL statement has a log_message modifier, the message is
2062 remembered, and not repeated. This is to avoid a lot of repetition when a
2063 message has many recipients that cause the same warning to be written.
2064 Howewer, Exim was preserving the list of already written lines for an
2065 entire SMTP session, which doesn't seem right. The memory is now reset if a
2066 new message is started.
2068 59. The "rewrite" debugging flag was not showing the result of rewriting in the
2069 debugging output unless log_rewrite was also set.
2071 60. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
2072 of (int)(handle) when we know that handle contains (void *)(-1).
2074 61. The Exim daemon panic-logs an error return when it closes the incoming
2075 connection. However "connection reset by peer" seems to be common, and
2076 isn't really an error worthy of noting specially, so that particular error
2079 62. When Exim is trying to find all the local interfaces, it used to panic and
2080 die if the ioctl to get the interface flags failed. However, it seems that
2081 on at least one OS (Solaris 9) it is possible to have an interface that is
2082 included in the list of interfaces, but for which you get a failure error
2083 for this call. This happens when the interface is not "plumbed" into a
2084 protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
2085 failure of the "get flags" call assumes that the interface is down.
2087 63. Added a ${eval10: operator, which assumes all numbers are decimal. This
2088 makes life easier for people who are doing arithmetic on fields extracted
2089 from dates, where you often get leading zeros that should not be
2090 interpreted as octal.
2092 64. Added qualify_domain to the redirect router, to override the global
2095 65. If a pathologically long header line contained very many addresses (the
2096 report of this problem mentioned 10 000) and each of them was rewritten,
2097 Exim could use up a very large amount of memory. (It kept on making new
2098 copies of the header line as it rewrote, and never released the old ones.)
2099 At the expense of a bit more processing, the header rewriting function has
2100 been changed so that it no longer eats memory in this way.
2102 66. The generation of the Received: header has been moved from the time that a
2103 message starts to be received, to the time that it finishes. The timestamp
2104 in the Received: header should now be very close to that of the <= log
2105 line. There are two side-effects of this change:
2107 (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
2108 logged header lines no longer include the local Received: line, because
2109 it has not yet been created. The same applies to a copy of the message
2110 that is returned to a non-SMTP sender when a message is rejected.
2112 (b) When a filter file is tested using -bf, no additional Received: header
2113 is added to the test message. After some thought, I decided that this
2116 This change does not affect the value of $received_for. It is still set
2117 after address rewriting, but before local_scan() is called.
2119 67. Installed the latest Cygwin-specific files from the Cygwin maintainer.
2121 68. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
2122 gave an unhelpful panic error message, and a defer error. I have managed to
2123 change this behaviour so that it now rejects any supplied certificate,
2124 which seems right, as the list of acceptable certificates is empty.
2126 69. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
2127 gave an unhelpful defer error. I have not managed to make this reject any
2128 supplied certificates, but the error message it gives is "no certificate
2129 supplied", which is not helpful.
2131 70. exigrep's output now also includes lines that are not associated with any
2132 message, but which match the given pattern. Implemented by a patch from
2133 Martin Sluka, which also tidied up the Perl a bit.
2135 71. Recipient callout verification, like sender verification, was using <> in
2136 the MAIL FROM command. This isn't really the right thing, since the actual
2137 sender may affect whether the remote host accepts the recipient or not. I
2138 have changed it to use the actual sender in the callout; this means that
2139 the cache record is now keyed on a recipient/sender pair, not just the
2140 recipient address. There doesn't seem to be a real danger of callout loops,
2141 since a callout by the remote host to check the sender would use <>.
2142 [SEE ABOVE: changed after hitting problems.]
2144 72. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
2145 temporary errors. However, in the case of such a code being given after
2146 the end of a data transmission (i.e. after ".") Exim was failing to write
2147 a retry record for the message. (Yes, there was some broken host that was
2148 actually sending 8xx at this point.)
2150 73. An unknown lookup type in a host list could cause Exim to panic-die when
2151 the list was checked. (An example that provoked this was putting <; in the
2152 middle of a list instead of at the start.) If this happened during a DATA
2153 ACL check, a -D file could be left lying around. This kind of configuration
2154 error no longer causes Exim to die; instead it causes a defer errror. The
2155 incident is still logged to the main and panic logs.
2157 74. Buglet left over from Exim 3 conversion. The message "too many messages
2158 in one connection" was written to the rejectlog but not the mainlog, except
2159 when address rewriting (yes!) was being logged.
2161 75. Added write_rejectlog option.
2163 76. When a system filter was run not as root (that is, when system_filter_user
2164 was set), the values of the $n variables were not being returned to the
2165 main process; thus, they were not subsequently available in the $sn
2168 77. Added +return_path_on_delivery log selector.
2170 78. A connection timeout was being treated differently from recipients deferred
2171 when testing hosts_max_try with a message that was older than the host's
2172 retry timeout. (The host should not be counted, thus allowing all hosts to
2173 be tried at least once before bouncing.) This may have been the cause of an
2174 occasionally reported bug whereby a message would remain on the queue
2175 longer than the retry timeout, but would be bounced if a delivery was
2176 forced. I say "may" because I never totally pinned down the problem;
2177 setting up timeout/retry tests is difficult. See also the next item.
2179 79. The ultimate address timeout was not being applied to errors that involved
2180 a combination of host plus message (for example, a timeout on a MAIL
2181 command). When an address resolved to a number of possible hosts, and they
2182 were not all tried for each delivery (e.g. because of hosts_max_try), a
2183 message could remain on the queue longer than the retry timeout.
2185 80. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
2188 81. Fixed an obscure SMTP outgoing bug which required at least the following
2189 conditions: (a) there was another message waiting for the same server;
2190 (b) the server returned 5xx to all RCPT commands in the first message so
2191 that the message was not completed; (c) the server dropped the connection
2192 or gave a negative response to the RSET that Exim sends to abort the
2193 transaction. The observed case was a dropped connection after DATA that had
2194 been sent in pipelining mode. That is, the server had advertised PIPELINING
2195 but was not implementing it correctly. The effect of the bug was incorrect
2196 behaviour, such as trying another host, and this could lead to a crash.
2202 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
2203 and daemon.c were passed as pointers to ints; they should have been
2204 pointers to socklen_t variables (which are typically unsigned ints).
2206 2. Some signed/unsigned type warnings in the os.c file for Linux have been
2209 3. Fixed a really odd bug that affected only the testing scheme; patching a
2210 certain fixed string in the binary changed the value of another string that
2211 happened to be identical to the end of the original first string.
2213 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
2214 name", it returns that address as the IP address. On some operating
2215 systems (e.g. Solaris), it also passes back the IP address string as the
2216 "host name". However, on others (e.g. Linux), it passes back an empty
2217 string. Exim wasn't checking for this, and was changing the host name to an
2218 empty string, assuming it had been canonicized.
2220 5. Although rare, it is permitted to have more than one PTR record for a given
2221 IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
2222 all the names associated with an address, because they do in Solaris.
2223 However, it seems that they do not in Linux for data that comes from the
2224 DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
2225 I found this out when I moved to a new Linux workstation and tried to run
2226 the Exim test suite.
2228 To get round this problem I have changed the code so that it now does its
2229 own call to the DNS to look up PTR records when searching for a host name.
2230 If nothing can be found in the DNS, it tries gethostbyaddr(), so that
2231 addresses that are only in /etc/hosts are still found.
2233 This behaviour is, however, controlled by an option called host_lookup_
2234 order, which defaults to "bydns:byaddr". If people want to use the other
2235 order, or indeed, just use one or the other means of lookup, they can
2236 specify it in this variable.
2238 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
2239 some operating systems, this comes back from gethostbyaddr() as an empty
2240 string, and this is what Exim used to test for. However, it seems that in
2241 other systems, "." is yielded. Exim now tests for this case too.
2243 7. The values of check_spool_space and check_log_space are now held internally
2244 as a number of kilobytes instead of an absolute number of bytes. If a
2245 numbers is specified without 'K' or 'M', it is rounded up to the nearest
2246 kilobyte. This means that much larger values can be stored.
2248 8. Exim monitor: an attempt to get the action menu when not actually pointing
2249 at a message produces an empty menu entitled "No message selected". This
2250 works on Solaris (OpenWindows). However, XFree86 does not like a menu with
2251 no entries in it ("Shell widget menu has zero width and/or height"). So I
2252 have added a single, blank menu entry in this case.
2254 9. Added ${quote_local_part.
2256 10. MIME decoding is now applied to the contents of Subject: header lines when
2259 11. Now that a reference to $sender_host_address automatically causes a reverse
2260 lookup to occur if necessary (4.13/18), there is no need to arrange for a
2261 host lookup before query-style lookups in lists that might use this
2262 variable. This has therefore been abolished, and the "net-" prefix is no
2263 longer necessary for query-style lookups.
2265 12. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
2266 have been a typo for LFLAGS, so it has been changed.
2268 13. The install script calls Exim with "-C /dev/null" in order to find the
2269 version number. If ALT_CONFIG_PREFIX was set, this caused an error message
2270 to be output. Howeve, since Exim outputs its version number before the
2271 error, it didn't break the script. It just looked ugly. I fixed this by
2272 always allowing "-C /dev/null" if the caller is root.
2274 14. Ignore overlarge ACL variable number when reading spool file - insurance
2275 against a later release with more variables having written the file.
2277 15. The standard form for an IPv6 address literal was being rejected by EHLO.
2278 Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
2279 this, as well as the form without the "IPv6" on the front.
2281 16. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
2282 OS/Makefile-Darwin file.
2284 17. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
2285 only to LDAP libraries that do not have LDAP_OPT_DEREF.
2287 18. After change 4.21/52, "%ld" was used to format the contents of the $inode
2288 variable. However, some OS use ints for inodes. I've added cast to long int
2289 to get rid of the compiler warning.
2291 19. I had forgotten to lock out "/../" in configuration file names when
2292 ALT_CONFIG_PREFIX was set.
2294 20. Routers used for verification do not need to specify transports. However,
2295 if such a router generated a host list, and callout was configured, Exim
2296 crashed, because it could not find a port number from the (non-existent)
2297 transport. It now assumes port 25 in this circumstance.
2299 21. Added the -t option to exigrep.
2301 22. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
2302 wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
2303 NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
2304 them is set, LOOKUP_LSEARCH is forced.
2306 23. "exim -bV" now outputs a list of lookups that are included in the binary.
2308 24. Added sender and host information to the "rejected by local_scan()" log
2309 line; previously there was no indication of these.
2311 25. Added .include_if_exists.
2313 26. Change 3.952/11 added an explicit directory sync on top of a file sync for
2314 Linux. It turns out that not all file systems support this. Apparently some
2315 versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
2316 do it.) To cope with this, the error EINVAL, which means that sync-ing is
2317 not supported on the file descriptor, is now ignored when Exim is trying to
2318 sync a directory. This applies only to Linux.
2320 27. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
2322 28. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
2323 /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
2326 29. Added support for maildirsize files from supplied patch (modified a bit).
2328 30. The use of :fail: followed by an empty string could lead Exim to respond to
2329 sender verification failures with (e.g.):
2331 550 Verification failed for <xxx>
2332 550 Sender verify failed
2334 where the first response line was missing the '-' that indicates it is not
2335 the final line of the response.
2337 31. The loop for finding the name of the user that called Exim had a hardwired
2338 limit of 10; it now uses the value of finduser_retries, which is used for
2339 all other user lookups.
2341 32. Added $received_count variable, available in data and not_smtp ACLs, and at
2344 33. Exim was neglecting to zero errno before one call of strtol() when
2345 expanding a string and expecting an integer value. On some systems this
2346 resulted in spurious "integer overflow" errors. Also, it was casting the
2347 result into an int without checking.
2349 34. Testing for a connection timeout using "timeout_connect" in the retry rules
2350 did not work. The code looks as if it has *never* worked, though it appears
2351 to have been documented since at least releast 1.62. I have made it work.
2353 35. The "timeout_DNS" error in retry rules, also documented since at least
2354 1.62, also never worked. As it isn't clear exactly what this means, and
2355 clearly it isn't a major issue, I have abolished the feature by treating it
2356 as "timeout", and writing a warning to the main and panic logs.
2358 36. The display of retry rules for -brt wasn't always showing the error code
2361 37. Added new error conditions to retry rules: timeout_A, timeout_MX,
2362 timeout_connect_A, timeout_connect_MX.
2364 38. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
2365 to the empty sender.
2367 39. The daemon was not analysing the content of -oX till after it had closed
2368 stderr and disconnected from the controlling terminal. This meant that any
2369 syntax errors were only noted on the panic log, and the return code from
2370 the command was 0. By re-arranging the code a little, I've made the
2371 decoding happen first, so such errors now appear on stderr, and the return
2372 code is 1. However, the actual setting up of the sockets still happens in
2373 the disconnected process, so errors there are still only recorded on the
2376 40. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
2377 connections (as happens on some IP stacks) was logged at start up time as
2378 just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
2379 it from "IPv6 and IPv4", which means that two separate sockets are being
2382 41. The debug output for gethostbyname2() or getipnodebyname() failures now
2383 says whether AF_INET or AF_INET6 was passed as an argument.
2385 42. Exiwhat output was messed up when time zones were included in log
2388 43. Exiwhat now gives more information about the daemon's listening ports,
2389 and whether -tls-on-connect was used.
2391 44. The "port" option of the smtp transport is now expanded.
2393 45. A "message" modifier in a "warn" statement in a non-message ACL was being
2394 silently ignored. Now an error message is written to the main and panic
2397 46. There's a new ACL modifier called "logwrite" which writes to a log file
2398 as soon as it is encountered.
2400 47. Added $local_user_uid and $local_user_gid at routing time.
2402 48. Exim crashed when trying to verify a sender address that was being
2405 49. Exim was recognizing only a space character after ".include". It now also
2406 recognizes a tab character.
2408 50. Fixed several bugs in the Perl script that creates the exim.8 man page by
2409 extracting the relevant information from the specification. The man page no
2410 longer contains scrambled data for the -d option, and I've added a section
2411 at the front about calling Exim under different names.
2413 51. Added "extra_headers" argument to the "mail" command in filter files.
2415 52. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
2418 53. Installed eximstats 1.29.
2420 54. Added transport_filter_timeout as a generic transport option.
2422 55. Exim no longer adds an empty Bcc: header to messages that have no To: or
2423 Cc: header lines. This was required by RFC 822, but it not required by RFC
2426 56. Exim used to add From:, Date:, and Message-Id: header lines to any
2427 incoming messages that did not have them. Now it does so only if the
2428 message originates locally, that is, if there is no associated remote host
2429 address. When Resent- header lines are present, this applies to the Resent-
2430 lines rather than the non-Resent- lines.
2432 57. Drop incoming SMTP connection after too many syntax or protocol errors. The
2433 limit is controlled by smtp_max_synprot_errors, defaulting to 3.
2435 58. Messages for configuration errors now include the name of the main
2436 configuration file - useful now that there may be more than one file in a
2437 list (.included file names were always shown).
2439 59. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
2440 for those rare installations that do not start the daemon as root or run it
2441 setuid root. I've cut out the call to initgroups() if the daemon is not
2444 60. The Exim user and group can now be bound into the binary as text strings
2445 that are looked up at the start of Exim's processing.
2447 61. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
2449 62. Added $mailstore_basename variable.
2451 63. Installed patch to sieve.c from Michael Haardt.
2453 64. When Exim failed to open the panic log after failing to open the main log,
2454 the original message it was trying to log was written to stderr and debug
2455 output, but if they were not available (the usual case in production), it
2456 was lost. Now it is written to syslog before the two lines that record the
2457 failures to open the logs.
2459 65. Users' Exim filters run in subprocesses under the user's uid. It is
2460 possible for a "deliver" command or an alias in a "personal" command to
2461 provoke an address rewrite. If logging of address rewriting is configured,
2462 this fails because the process is not running as root or exim. There may be
2463 a better way of dealing with this, but for the moment (because 4.30 needs
2464 to be released), I have disabled address rewrite logging when running a
2465 filter in a non-root, non-exim process.
2471 1. The buildconfig auxiliary program wasn't quoting the value set for
2472 HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
2473 not defined. This bug was masked in 4.22 by the effect that was fixed in
2476 2. Some messages that were rejected after a message id was allocated were
2477 shown as "incomplete" by exigrep. It no longer does this for messages that
2478 are rejected by local_scan() or the DATA or non-SMTP ACLs.
2480 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
2481 have allow_domain_literals set, the ID did not get logged in the <= line.
2482 Domain literals are now always recognized in Message-ID: header lines.
2484 4. The first argument for a ${extract expansion item is the key name or field
2485 number. Leading and trailing spaces in this item were not being ignored,
2486 causing some misleading effects.
2488 5. When deliver_drop_privilege was set, single queue runner processes started
2489 manually (i.e. by the command "exim -q") or by the daemon (which uses the
2490 same command in the process it spins off) were not dropping privilege.
2492 6. When the daemon running as "exim" started a queue runner, it always
2493 re-executed Exim in the spun-off process. This is a waste of effort when
2494 deliver_drop_privilege is set. The new process now just calls the
2495 queue-runner function directly.
2501 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
2504 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
2505 ignored. Though the use of -oP was forcing the writing of a pid file, it
2506 was always written to the default place.
2508 3. If the message "no IP address found for host xxxx" is generated during
2509 incoming verification, it is now followed by identification of the incoming
2510 connection (so you can more easily find what provoked it).
2512 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
2514 5. Added some features to "harden" Exim a bit more against certain attacks:
2516 (a) There is now a build-time option called FIXED_NEVER_USERS that can
2517 be put in Local/Makefile. This is like the never_users runtime option,
2518 but it cannot be overridden. The default setting is "root".
2520 (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
2521 prefix string with which any file named in a -C command line option
2524 (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
2525 is retained for -C and -D only if the caller of Exim is root. Without
2526 it, the exim user may also use -C and -D and retain privilege.
2528 (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
2529 command line option is disabled.
2531 6. Macro names set by the -D option must start with an upper case letter, just
2532 like macro names defined in the configuration file.
2534 7. Added "dereference=" facility to LDAP.
2536 8. Two instances of the typo "uknown" in the source files are fixed.
2538 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
2539 the Configure-Makefile script screwed up while processing it.
2541 10. Incorporated PCRE 4.4.
2543 11. The SMTP synchronization check was not operating right at the start of an
2544 SMTP session. For example, it could not catch a HELO sent before the client
2545 waited for the greeting. There is now a check for outstanding input at the
2546 point when the greeting is written. Because of the duplex, asynchronous
2547 nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
2548 way, but not yet received, when the check is performed.
2550 12. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
2551 on TCP/IP sockets, because this apparently causes some broken clients to
2554 13. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
2555 unchanged) from the Cygwin maintainer.
2557 14. The code for -bV that shows what is in the binary showed "mbx" when maildir
2558 was supported instead of testing for mbx. Effectively a typo.
2560 15. The spa authenticator server code was not checking that the input it
2561 received was valid base64.
2563 16. The debug output line for the "set" modifier in ACLs was not showing the
2564 name of the variable that was being set.
2566 17. Code tidy: the variable type "vtype_string" was never used. Removed it.
2568 18. Previously, a reference to $sender_host_name did not cause a DNS reverse
2569 lookup on its own. Something else was needed to trigger the lookup. For
2570 example, a match in host_lookup or the need for a host name in a host list.
2571 Now, if $sender_host_name is referenced and the host name has not yet been
2572 looked up, a lookup is performed. If the lookup fails, the variable remains
2573 empty, and $host_lookup_failed is set to "1".
2575 19. Added "eqi" as a case-independent comparison operator.
2577 20. The saslauthd authentication condition could segfault if neither service
2578 nor realm was specified.
2580 21. If an overflowing value such as "2048M" was set for message_size_limit, the
2581 error message that was logged was misleading, and incoming SMTP
2582 connections were dropped. The message is now more accurate, and temporary
2583 errors are given to SMTP connections.
2585 22. In some error situations (such as 21 above) Exim rejects all SMTP commands
2586 (except RSET) with a 421 error, until QUIT is received. However, it was
2587 failing to send a response to QUIT.
2589 23. The HELO ACL was being run before the code for helo_try_verify_hosts,
2590 which made it impossible to use "verify = helo" in the HELO ACL. The HELO
2591 ACL is now run after the helo_try_verify_hosts code.
2593 24. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
2594 "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
2595 case-independent, so other case variants are also recognized). Apparently
2596 some systems use these upper case variants.
2598 25. If more than two messages were waiting for the same host, and a transport
2599 filter was specified for the transport, Exim sent two messages over the
2600 same TCP/IP connection, and then failed with "socket operation on non-
2601 socket" when it tried to send the third.
2603 26. Added Exim::debug_write and Exim::log_write for embedded Perl use.
2605 27. The extern definition of crypt16() in expand.c was not being excluded when
2606 the OS had its own crypt16() function.
2608 28. Added bounce_return_body as a new option, and bounce_return_size_limit
2609 as a preferred synonym for return_size_limit, both as an option and as an
2612 29. Added LIBS=-liconv to OS/Makefile-OSF1.
2614 30. Changed the default configuration ACL to relax the local part checking rule
2615 for addresses that are not in any local domains. For these addresses,
2616 slashes and pipe symbols are allowed within local parts, but the sequence
2617 /../ is explicitly forbidden.
2619 31. SPA server authentication was not clearing the challenge buffer before
2622 32. log_message in a "warn" ACL statement was writing to the reject log as
2623 well as to the main log, which contradicts the documentation and doesn't
2624 seem right (because no rejection is happening). So I have stopped it.
2626 33. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
2627 However, I am unable to do any testing of this.
2629 34. Fixed an infelicity in the appendfile transport. When checking directories
2630 for a mailbox, to see if any needed to be created, it was accidentally
2631 using path names with one or more superfluous leading slashes; tracing
2632 would show up entries such as stat("///home/ph10", 0xFFBEEA48).
2634 35. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
2635 contents are added to the log line that is written for every discarded
2636 recipient. (Previously a log_message setting was ignored.)
2638 36. The ${quote: operator now quotes the string if it is empty.
2640 37. The install script runs exim in order to find its version number. If for
2641 some reason other than non-existence or emptiness, which it checks, it
2642 could not run './exim', it was installing it with an empty version number,
2643 i.e. as "exim-". This error state is now caught, and the installation is
2646 38. An argument was missing from the function that creates an error message
2647 when Exim fails to connect to the socket for saslauthd authentication.
2648 This could cause Exim to crash, or give a corrupted message.
2650 39. Added isip, isip4, and isip6 to ${if conditions.
2652 40. The ACL variables $acl_xx are now saved with the message, and can be
2653 accessed later in routers, transports, and filters.
2655 41. The new lookup type nwildlsearch is like wildlsearch, except that the key
2656 strings in the file are not string-expanded.
2658 42. If a MAIL command specified a SIZE value that was too large to fit into an
2659 int variable, the check against message_size_limit failed. Such values are
2660 now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
2661 day this will have to be increased, but I don't think I want to be around
2662 when emails are that large.
2669 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
2670 iconv() is not standard in FreeBSD.
2672 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
2673 IPv6 enabled. The observed symptom was a segmentation fault on return from
2674 the function os_common_find_running_interfaces() in src/os.c.
2676 3. In the check_special_case() function in daemon.c I had used "errno" as an
2677 argument name, which causes warnings on some systems. This was basically a
2678 typo, since it was named "eno" in the comments!
2680 4. The code that waits for the clock to tick (at a resolution of some fraction
2681 of a second) so as to ensure message-id uniqueness was always waiting for
2682 at least one whole tick, when it could have waited for less. [This is
2683 almost certainly not relevant at current processor speeds, where it is
2684 unlikely to ever wait at all. But we try to future-proof.]
2686 5. The function that sleeps for a time interval that includes fractions of a
2687 second contained a race. It did not block SIGALRM between setting the
2688 timer, and suspending (a couple of lines later). If the interval was short
2689 and the sigsuspend() was delayed until after it had expired, the suspension
2690 never ended. On busy systems this could lead to processes getting stuck for
2693 6. Some uncommon configurations may cause a lookup to happen in a queue runner
2694 process, before it forks any delivery processes. The open lookup caching
2695 mechanism meant that the open file or database connection was passed into
2696 the delivery process. The problem was that delivery processes always tidy
2697 up cached lookup data. This could cause a problem for the next delivery
2698 process started by the queue runner, because the external queue runner
2699 process does not know about the closure. So the next delivery process
2700 still has data in the lookup cache. In the case of a file lookup, there was
2701 no problem because closing a file descriptor in a subprocess doesn't affect
2702 the parent. However, if the lookup was caching a connection to a database,
2703 the connection was closed, and the second delivery process was likely to
2704 see errors such as "PGSQL: query failed: server closed the connection
2705 unexpectedly". The problem has been fixed by closing all cached lookups
2706 in a queue runner before running a delivery process.
2708 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
2709 seem to have the "const" qualifier which it has on other OS. I've
2712 8. Change 4.21/2 was too strict. It is only if there are two authenticators
2713 *of the same type* (client or server) with the same public name that an
2714 error should be diagnosed.
2716 9. When Exim looked up a host name for an IP address, but failed to find the
2717 original IP address when looking up the host name (a safety check), it
2718 output the message "<ip address> does not match any IP for NULL", which was
2719 confusing, to say the least. The bug was that the host name should have
2720 appeared instead of "NULL".
2722 10. Since release 3.03, if Exim is called by a uid other than root or the Exim
2723 user that is built into the binary, and the -C or -D options is used, root
2724 privilege is dropped before the configuration file is read. In addition,
2725 logging is switched to stderr instead of the normal log files. If the
2726 configuration then re-defines the Exim user, the unprivileged environment
2727 is probably not what is expected, so Exim logs a panic warning message (but
2730 However, if deliver_drop_privilege is set, the unprivileged state may well
2731 be exactly what is intended, so the warning has been cut out in that case,
2732 and Exim is allowed to try to write to its normal log files.
2738 1. smtp_return_error_details was not giving details for temporary sender
2739 or receiver verification errors.
2741 2. Diagnose a configuration error if two authenticators have the same public
2744 3. Exim used not to create the message log file for a message until the first
2745 delivery attempt. This could be confusing when incoming messages were held
2746 for policy or load reasons. The message log file is now created at the time
2747 the message is received, and an initial "Received" line is written to it.
2749 4. The automatically generated man page for command line options had a minor
2750 bug that caused no ill effects; however, a more serious problem was that
2751 the procedure for building the man page automatically didn't always
2752 operate. Consequently, release 4.20 contains an out-of-date version. This
2753 shouldn't happen again.
2755 5. When building Exim with embedded Perl support, the script that builds the
2756 Makefile was calling 'perl' to find its compile-time parameters, ignoring
2757 any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
2759 6. The freeze_tell option was not being used for messages that were frozen on
2760 arrival, either by an ACL or by local_scan().
2762 7. Added the smtp_incomplete_transaction log selector.
2764 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
2765 was accepting AUTH without a new EHLO.
2767 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
2768 ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
2771 10. Logging of TCP/IP connections (when configured) now happens in the main
2772 daemon process instead of the child process, so that the TCP/IP connection
2773 count is more accurate (but it can never be perfect).
2775 11. The use of "drop" in a nested ACL was not being handled correctly in the
2776 outer ACL. Now, if condition failure induced by the nested "drop" causes
2777 the outer ACL verb to deny access ("accept" or "discard" after "endpass",
2778 or "require"), the connection is dropped.
2780 12. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
2781 that yield "discard" can now be used with an "accept" or a "discard" verb,
2782 but an error is generated for any others (because I can't see a useful way
2783 to define what should happen).
2785 13. When an ACL is read dynamically from a file (or anywhere else), the lines
2786 are now processed in the same way as lines in the Exim configuration file.
2787 In particular, continuation lines are supported.
2789 14. Added the "dnslists = a.b.c!=n.n.n.n" feature.
2791 15. Added -ti meaning -t -i.
2793 16. Check for letters, digits, hyphens, and dots in the names of dnslist
2794 domains, and warn by logging if others are found.
2796 17. At least on BSD, alignment is not guarenteed for the array of ifreq's
2797 returned from GIFCONF when Exim is trying to find the list of interfaces on
2798 a host. The code in os.c has been modified to copy each ifreq to an aligned
2799 structure in all cases.
2801 Also, in some cases, the returned ifreq's were being copied to a 'struct
2802 ifreq' on the stack, which was subsequently passed to host_ntoa(). That
2803 means the last couple of bytes of an IPv6 address could be chopped if the
2804 ifreq contained only a normal sockaddr (14 bytes storage).
2806 18. Named domain lists were not supported in the hosts_treat_as_local option.
2807 An entry such as +xxxx was not recognized, and was treated as a literal
2810 19. Ensure that header lines added by a DATA ACL are included in the reject log
2811 if the ACL subsequently rejects the message.
2813 20. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
2814 MD5 (which is deprecated).
2816 21. When testing a filter file using -bf, Exim was writing a message when it
2817 took the sender from a "From " line in the message, but it was not doing so
2818 when it took $return_path from a Return-Path: header line. It now does.
2820 22. If the contents of a "message" modifier for a "warn" ACL verb do not begin
2821 with a valid header line field name (a series of printing characters
2822 terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
2824 23. Changed "disc" in the source to "disk" to conform to the documentation and
2825 the book and for uniformity.
2827 24. Ignore Sendmail's -Ooption=value command line item.
2829 25. When execve() failed while trying to run a command in a pipe transport,
2830 Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
2831 could be confused with a return value of 69 from the command itself. This
2832 has been changed to 127, the value the shell returns if it is asked to run
2833 a non-existent command. The wording for the related log line suggests a
2834 non-existent command as the problem.
2836 26. If received_header_text expands to an empty string, do not add a Received:
2837 header line to the message. (Well, it adds a token one on the spool, but
2838 marks it "old" so that it doesn't get used or transmitted.)
2840 27. Installed eximstats 1.28 (addition of -nt option).
2842 28. There was no check for failure on the call to getsockname() in the daemon
2843 code. This can fail if there is a shortage of resources on the system, with
2844 ENOMEM, for example. A temporary error is now given on failure.
2846 29. Contrary to the C standard, it seems that in some environments, the
2847 equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
2848 program. Exim now does this explicitly; it affects the formatting of
2849 timestamps using strftime().
2851 30. If exiqsumm was given junk data, it threw up some uninitialized variable
2852 complaints. I've now initialized all the variables, to avoid this.
2854 32. Header lines added by a system filter were not being "seen" during
2855 transport-time rewrites.
2857 33. The info_callback() function passed to OpenSSL is set up with type void
2858 (*)(SSL *, int, int), as described somewhere. However, when calling the
2859 function (actually a macro) that sets it up, the type void(*)() is
2860 expected. I've put in a cast to prevent warnings from picky compilers.
2862 34. If a DNS black list lookup found a CNAME record, but there were no A
2863 records associated with the domain it pointed at, Exim crashed.
2865 35. If a DNS black list lookup returned more than one A record, Exim ignored
2866 all but the first. It now scans all returned addresses if a particular IP
2867 value is being sought. In this situation, the contents of the
2868 $dnslist_value variable are a list of all the addresses, separated by a
2871 36. Tightened up the rules for host name lookups using reverse DNS. Exim used
2872 to accept a host name and all its aliases if the forward lookup for any of
2873 them yielded the IP address of the incoming connection. Now it accepts only
2874 those names whose forward lookup yields the correct IP address. Any other
2875 names are discarded. This closes a loophole whereby a rogue DNS
2876 administrator could create reverse DNS records to break through a
2877 wildcarded host restriction in an ACL.
2879 37. If a user filter or a system filter that ran in a subprocess used any of
2880 the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
2881 the wrong values were passed to the pipe command ($thisaddress had the
2882 value of $0, $0 had the value of $1, etc). This bug was introduced by
2883 change 4.11/101, and not discovered because I wrote an inadequate test. :-(
2885 38. Improved the line breaking for long SMTP error messages from ACLs.
2886 Previously, if there was no break point between 40 and 75 characters, Exim
2887 left the rest of the message alone. Two changes have been made: (a) I've
2888 reduced the minimum length to 35 characters; (b) if it can't find a break
2889 point between 35 and 75 characters, it looks ahead and uses the first one
2890 that it finds. This may give the occasional overlong line, but at least the
2891 remaining text gets split now.
2893 39. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
2894 file descriptors might be low, and that setting 1000 would always raise it.
2895 It turns out that in some environments, the limit is already over 1000 and
2896 that lowering it causes trouble. So now Exim takes care not to decrease it.
2898 40. When delivering a message, the value of $return_path is set to $sender_
2899 address at the start of routing (routers may change the value). By an
2900 oversight, this default was not being set up when an address was tested by
2901 -bt or -bv, which affected the outcome if any router or filter referred to
2904 41. The idea of the "warn" ACL verb is that it adds a header or writes to the
2905 log only when "message" or "log_message" are set. However, if one of the
2906 conditions was an address verification, or a call to a nested ACL, the
2907 messages generated by the underlying test were being passed through. This
2908 no longer happens. The underlying message is available in $acl_verify_
2909 message for both "message" and "log_message" expansions, so it can be
2910 passed through if needed.
2912 42. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
2913 new expansion $bh_ to give the encoded byte string without charset
2914 translation. Translation happens only if iconv() is available; HAVE_ICONV
2915 indicates this at build time. HEADERS_CHARSET gives the charset to
2916 translate to; headers_charset can change it in the configuration, and
2917 "headers charset" can change it in an individual filter file.
2919 43. Now that we have a default RFC 2047 charset (see above), the code in Exim
2920 that creates RFC 2047 encoded "words" labels them as that charset instead
2921 of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
2922 expansion operator; (ii) when Exim creates a From: line for a local
2923 message; (iii) when a header line is rewritten to include a "phrase" part.
2925 44. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
2926 buggy, causing it to skip the first lines of messages whose message ID
2927 ended in 'D'. This would not have bitten before Exim release 4.14, because
2928 message IDs were unlikely to end in 'D' before then. The effect was to have
2929 incorrect size information for certain domains.
2931 45. #include "config.h" was missing at the start of the crypt16.c module. This
2932 caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
2935 46. If there was a timeout during a "random" callout check, Exim treated it as
2936 a failure of the random address, and carried on sending RSET and the real
2937 address. If the delay was just some slowness somewhere, the response to the
2938 original RCPT would be taken as a response to RSET and so on, causing
2939 mayhem of various kinds.
2941 47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
2942 when I implemented it. It didn't allow for the fact that some option values
2943 may legitimatetly be negative (e.g. size_addition), and it didn't even do
2944 the right test for positive values.
2946 48. Domain names in DNS records are case-independent. Exim always looks them up
2947 in lower case. Some resolvers return domain names in exactly the case they
2948 appear in the zone file, that is, they may contain uppercase letters. Not
2949 all resolvers do this - some return always lower case. Exim was treating a
2950 change of case by a resolver as a change of domain, similar to a widening
2951 of a domain abbreviation. This triggered its re-routing code and so it was
2952 trying to route what was effectively the same domain again. This normally
2953 caused routing to fail (because the router wouldn't handle the domain
2954 twice). Now Exim checks for this case specially, and just changes the
2955 casing of the domain that it ultimately uses when it transmits the message
2958 49. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
2961 50. If a filter generated a file delivery with a non-absolute name (possible if
2962 no home directory exists for the router), the forbid_file option was not
2965 51. Added '&' feature to dnslists, to provide bit mask matching in addition to
2966 the existing equality matching.
2968 52. Exim was using ints instead of ino_t variables in some places where it was
2969 dealing with inode numbers.
2971 53. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
2972 TMPDIR="/tmp"), Exim checks for the presence of an environment variable
2973 called TMPDIR, and if it finds it is different, it changes its value.
2975 54. The smtp_printf() function is now made available to local_scan() so
2976 additional output lines can be written before returning. There is also an
2977 smtp_fflush() function to enable the detection of a dropped connection.
2978 The variables smtp_input and smtp_batched_input are exported to
2981 55. Changed the default runtime configuration: the message "Unknown user"
2982 has been removed from the ACL, and instead placed on the localuser router,
2983 using the cannot_route_message feature. This means that any verification
2984 failures that generate their own messages won't get overridden. Similarly,
2985 the "Unrouteable address" message that was in the ACL for unverifiable
2986 relay addresses has also been removed.
2988 56. Added hosts_avoid_esmtp to the smtp transport.
2990 57. The exicyclog script was not checking for the esoteric option
2991 CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
2992 will work only if exicyclog is run under the appropriate euid.
2994 58. Following a discussion on the list, the rules by which Exim recognises line
2995 endings on incoming messages have been changed. The -dropcr and drop_cr
2996 options are now no-ops, retained only for backwards compatibility. The
2997 following line terminators are recognized: LF CRLF CR. However, special
2998 processing applies to CR:
3000 (i) The sequence CR . CR does *not* terminate an incoming SMTP message,
3001 nor a local message in the state where . is a terminator.
3003 (ii) If a bare CR is encountered in a header line, an extra space is added
3004 after the line terminator so as not to end the header. The reasoning
3005 behind this is that bare CRs in header lines are most likely either
3006 to be mistakes, or people trying to play silly games.
3008 59. The size of a message, as listed by "-bp" or in the Exim monitor window,
3009 was being incorrectly given as 18 bytes larger than it should have been.
3010 This is a VOB (very old bug).
3012 60. This may never have affected anything current, but just in case it has:
3013 When the local host is found other than at the start of a list of hosts,
3014 the local host, those with the same MX, and any that follow, are discarded.
3015 When the list in question was part of a longer list of hosts, the following
3016 hosts (not currently being processed) were also being discarded. This no
3017 longer happens. I'm not sure if this situation could ever has previously
3020 61. Added the "/MX" feature to lists of hosts in the manualroute and query
3023 62. Whenever Exim generates a new message, it now adds an Auto-Submitted:
3024 header. This is something that is recommended in a new Internet Draft, and
3025 is something that is documented as being done by Sendmail. There are two
3026 possible values. For messages generated by the autoreply transport, Exim
3029 Auto-Submitted: auto-replied
3031 whereas for all other generated messages (e.g. bounces) it adds
3033 Auto-Submitted: auto-generated
3035 63. The "personal" condition in filters now includes a test for the
3036 Auto-Submitted: header. If it contains the string "auto-" the message it
3037 not considered personal.
3039 64. Added rcpt_include_affixes as a generic transport option.
3041 65. Added queue_only_override (default true).
3043 66. Added the syslog_duplication option.
3045 67. If what should have been the first header line of a message consisted of
3046 a space followed by a colon, Exim was mis-interpreting it as a header line.
3047 It isn't of course - it is syntactically invalid and should therefore be
3048 treated as the start of the message body. The misbehaviour could have
3049 caused a number of strange effects, including loss of data in subsequent
3050 header lines, and spool format errors.
3052 68. Formerly, the AUTH parameter on a MAIL command was trusted only if the
3053 client host had authenticated. This control can now be exercised by an ACL
3054 for more flexibility.
3056 69. By default, callouts do not happen when testing with -bh. There is now a
3057 variant, -bhc, which does actually run the callout code, including
3058 consulting and updating the callout cache.
3060 70. Added support for saslauthd authentication, courtesy of Alexander
3063 71. If statvfs() failed on the spool or log directories while checking their
3064 size for availability, Exim confusingly gave the error "space shortage".
3065 Furthermore, in debugging mode it crashed with a floating point exception.
3066 These checks are done if check_{spool,log}_{space,inodes} are set, and when
3067 an SMTP message arrives with SIZE= on the MAIL command. As this is a really
3068 serious problem, Exim now writes to the main and panic logs when this
3069 happens, with details of the failure. It then refuses to accept the
3070 incoming message, giving the message "spool directory problem" or "log
3071 directory problem" with a 421 code for SMTP messages.
3073 72. When Exim is about to re-exec itself, it ensures that the file descriptors
3074 0, 1, and 2 exist, because some OS complain for execs without them (see
3075 ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
3076 descriptors. However, the code omitted to check that the open succeeded,
3077 causing mysterious errors if for some reason the permissions on /dev/null
3078 got screwed. Now Exim writes a message to the main and panic logs, and
3079 bombs out if it can't open /dev/null.
3081 73. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
3082 interact so that it is all more flexible. It is supposed to remain
3083 backwards compatible. Also added extra_local_interfaces.
3085 74. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
3086 to bomb out with an assertion failure - to the client this appears as a
3087 connection drop. This problem occurs in the part of the code that was taken
3088 from the Samba project. Fortunately, the assertion is in a very simple
3089 function, so I have fixed this by reproducing the function inline in the
3090 one place where it is called, and arranging for authentication to fail
3091 instead of killing the process with assert().
3093 75. The SPA client code was not working when the server requested OEM rather
3094 than Unicode encoding.
3096 76. Added code to make require_files with a specific uid setting more usable in
3097 the case where statting the file as root fails - usually a non-root-mounted
3098 NFS file system. When this happens and the failure is EACCES, Exim now
3099 forks a subprocess and does the per-uid checking as the relevant uid.
3101 77. Added process_log_path.
3103 78. If log_file_path was not explicitly set, a setting of check_log_space or
3104 check_log_inodes was ignored.
3106 79. If a space check for the spool or log partitions fails, the incident is now
3107 logged. Of course, in the latter case the data may get lost...
3109 80. Added the %p formatting code to string_format() so that it can be used to
3110 print addresses in debug_print(). Adjusted all the address printing in the
3111 debugging in store.c to use %p rather than %d.
3113 81. There was a concern that a line of code in smtp_in.c could overflow a
3114 buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
3115 initially expressed, the concern was not well-founded, because trailing
3116 spaces are removed early. However, if the trailing spaces were followed by
3117 a NULL, they did not get removed, so the overflow was possible. Two fixes
3120 (a) I re-wrote the offending code in a cleaner fashion.
3121 (b) If an incoming SMTP command contains a NULL character, it is rejected
3124 82. When Exim changes uid/gid to the Exim user at daemon start time, it now
3125 runs initgroups(), so that if the Exim user is in any additional groups,
3126 they will be used during message reception.
3132 The change log for 4.20 and earlier releases has been archived.
projects / exim.git / blob