drupal-configs/apache2/apache2.conf

   1 # This is the main Apache server configuration file.  It contains the
   2 # configuration directives that give the server its instructions.
   3 # See http://httpd.apache.org/docs/2.4/ for detailed information about
   4 # the directives and /usr/share/doc/apache2/README.Debian about Debian specific
   5 # hints.
   6 #
   7 #
   8 # Summary of how the Apache 2 configuration works in Debian:
   9 # The Apache 2 web server configuration in Debian is quite different to
  10 # upstream's suggested way to configure the web server. This is because Debian's
  11 # default Apache2 installation attempts to make adding and removing modules,
  12 # virtual hosts, and extra configuration directives as flexible as possible, in
  13 # order to make automating the changes and administering the server as easy as
  14 # possible.
  15
  16 # It is split into several files forming the configuration hierarchy outlined
  17 # below, all located in the /etc/apache2/ directory:
  18 #
  19 #       /etc/apache2/
  20 #       |-- apache2.conf
  21 #       |       `--  ports.conf
  22 #       |-- mods-enabled
  23 #       |       |-- *.load
  24 #       |       `-- *.conf
  25 #       |-- conf-enabled
  26 #       |       `-- *.conf
  27 #       `-- sites-enabled
  28 #               `-- *.conf
  29 #
  30 #
  31 # * apache2.conf is the main configuration file (this file). It puts the pieces
  32 #   together by including all remaining configuration files when starting up the
  33 #   web server.
  34 #
  35 # * ports.conf is always included from the main configuration file. It is
  36 #   supposed to determine listening ports for incoming connections which can be
  37 #   customized anytime.
  38 #
  39 # * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
  40 #   directories contain particular configuration snippets which manage modules,
  41 #   global configuration fragments, or virtual host configurations,
  42 #   respectively.
  43 #
  44 #   They are activated by symlinking available configuration files from their
  45 #   respective *-available/ counterparts. These should be managed by using our
  46 #   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
  47 #   their respective man pages for detailed information.
  48 #
  49 # * The binary is called apache2. Due to the use of environment variables, in
  50 #   the default configuration, apache2 needs to be started/stopped with
  51 #   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
  52 #   work with the default configuration.
  53
  54
  55 # Global configuration
  56 #
  57
  58 #
  59 # ServerRoot: The top of the directory tree under which the server's
  60 # configuration, error, and log files are kept.
  61 #
  62 # NOTE!  If you intend to place this on an NFS (or otherwise network)
  63 # mounted filesystem then please read the Mutex documentation (available
  64 # at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
  65 # you will save yourself a lot of trouble.
  66 #
  67 # Do NOT add a slash at the end of the directory path.
  68 #
  69 #ServerRoot "/etc/apache2"
  70
  71 #
  72 # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
  73 #
  74 #Mutex file:${APACHE_LOCK_DIR} default
  75
  76 #
  77 # The directory where shm and other runtime files will be stored.
  78 #
  79
  80 DefaultRuntimeDir ${APACHE_RUN_DIR}
  81
  82 #
  83 # PidFile: The file in which the server should record its process
  84 # identification number when it starts.
  85 # This needs to be set in /etc/apache2/envvars
  86 #
  87 PidFile ${APACHE_PID_FILE}
  88
  89 #
  90 # Timeout: The number of seconds before receives and sends time out.
  91 #
  92 Timeout 300
  93
  94 #
  95 # KeepAlive: Whether or not to allow persistent connections (more than
  96 # one request per connection). Set to "Off" to deactivate.
  97 #
  98 KeepAlive On
  99
 100 #
 101 # MaxKeepAliveRequests: The maximum number of requests to allow
 102 # during a persistent connection. Set to 0 to allow an unlimited amount.
 103 # We recommend you leave this number high, for maximum performance.
 104 #
 105 MaxKeepAliveRequests 100
 106
 107 #
 108 # KeepAliveTimeout: Number of seconds to wait for the next request from the
 109 # same client on the same connection.
 110 #
 111 KeepAliveTimeout 5
 112
 113
 114 # These need to be set in /etc/apache2/envvars
 115 User ${APACHE_RUN_USER}
 116 Group ${APACHE_RUN_GROUP}
 117
 118 #
 119 # HostnameLookups: Log the names of clients or just their IP addresses
 120 # e.g., www.apache.org (on) or 204.62.129.132 (off).
 121 # The default is off because it'd be overall better for the net if people
 122 # had to knowingly turn this feature on, since enabling it means that
 123 # each client request will result in AT LEAST one lookup request to the
 124 # nameserver.
 125 #
 126 HostnameLookups Off
 127
 128 # ErrorLog: The location of the error log file.
 129 # If you do not specify an ErrorLog directive within a <VirtualHost>
 130 # container, error messages relating to that virtual host will be
 131 # logged here.  If you *do* define an error logfile for a <VirtualHost>
 132 # container, that host's errors will be logged there and not here.
 133 #
 134 ErrorLog ${APACHE_LOG_DIR}/error.log
 135
 136 #
 137 # LogLevel: Control the severity of messages logged to the error_log.
 138 # Available values: trace8, ..., trace1, debug, info, notice, warn,
 139 # error, crit, alert, emerg.
 140 # It is also possible to configure the log level for particular modules, e.g.
 141 # "LogLevel info ssl:warn"
 142 #
 143 LogLevel warn
 144
 145 # Include module configuration:
 146 IncludeOptional mods-enabled/*.load
 147 IncludeOptional mods-enabled/*.conf
 148
 149 # Include list of ports to listen on
 150 Include ports.conf
 151
 152
 153 # Sets the default security model of the Apache2 HTTPD server. It does
 154 # not allow access to the root filesystem outside of /usr/share and /var/www.
 155 # The former is used by web applications packaged in Debian,
 156 # the latter may be used for local directories served by the web server. If
 157 # your system is serving content from a sub-directory in /srv you must allow
 158 # access here, or in any related virtual host.
 159 <Directory />
 160         Options FollowSymLinks
 161         AllowOverride None
 162         Require all denied
 163 </Directory>
 164
 165 <Directory /usr/share>
 166         AllowOverride None
 167         Require all granted
 168 </Directory>
 169
 170 <Directory /var/www/>
 171         Options Indexes FollowSymLinks
 172         AllowOverride None
 173         Require all granted
 174 </Directory>
 175
 176 #<Directory /srv/>
 177 #       Options Indexes FollowSymLinks
 178 #       AllowOverride None
 179 #       Require all granted
 180 #</Directory>
 181
 182
 183
 184
 185 # AccessFileName: The name of the file to look for in each directory
 186 # for additional configuration directives.  See also the AllowOverride
 187 # directive.
 188 #
 189 AccessFileName .htaccess
 190
 191 #
 192 # The following lines prevent .htaccess and .htpasswd files from being
 193 # viewed by Web clients.
 194 #
 195 <FilesMatch "^\.ht">
 196         Require all denied
 197 </FilesMatch>
 198
 199
 200 #
 201 # The following directives define some format nicknames for use with
 202 # a CustomLog directive.
 203 #
 204 # These deviate from the Common Log Format definitions in that they use %O
 205 # (the actual bytes sent including headers) instead of %b (the size of the
 206 # requested file), because the latter makes it impossible to detect partial
 207 # requests.
 208 #
 209 # Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
 210 # Use mod_remoteip instead.
 211 #
 212 LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
 213 LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
 214 LogFormat "%h %l %u %t \"%r\" %>s %O" common
 215 LogFormat "%{Referer}i -> %U" referer
 216 LogFormat "%{User-agent}i" agent
 217
 218 # Include of directories ignores editors' and dpkg's backup files,
 219 # see README.Debian for details.
 220
 221 # Include generic snippets of statements
 222 IncludeOptional conf-enabled/*.conf
 223
 224 # Include the virtual host configurations:
 225 IncludeOptional sites-enabled/*.conf
 226
 227 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet