X-Git-Url: https://vcs.fsf.org/?p=squirrelmail.git;a=blobdiff_plain;f=functions%2Fmime.php;h=14b3eae27cc79654585da56acfc1d2f6c6e49d3a;hp=e95246e79ffcc7c9b2baf245150f5e820db39016;hb=da4c66e8aed8a6deb1e1a2cefe5a5323f309a50a;hpb=05c7f8f25717f00092f5159d30f563652a83e335
diff --git a/functions/mime.php b/functions/mime.php
index e95246e7..14b3eae2 100644
--- a/functions/mime.php
+++ b/functions/mime.php
@@ -1,1150 +1,1426 @@
entities[] = $msg;
- }
- }
-
- /* --------------------------------------------------------------------------------- */
- /* MIME DECODING */
- /* --------------------------------------------------------------------------------- */
-
- // This function gets the structure of a message and stores it in the "message" class.
- // It will return this object for use with all relevant header information and
- // fully parsed into the standard "message" object format.
- function mime_structure ($imap_stream, $header) {
-
- sqimap_messages_flag ($imap_stream, $header->id, $header->id, 'Seen');
- $ssid = sqimap_session_id();
- $lsid = strlen( $ssid );
- $id = $header->id;
- fputs ($imap_stream, "$ssid FETCH $id BODYSTRUCTURE\r\n");
- //
- // This should use sqimap_read_data instead of reading it itself
- //
- $read = fgets ($imap_stream, 10000);
- $bodystructure = '';
- while( substr($read, 0, $lsid) <> $ssid &&
- !feof( $imap_stream ) ) {
- $bodystructure .= $read;
- $read = fgets ($imap_stream, 10000);
- }
- $read = $bodystructure;
-
- // isolate the body structure and remove beginning and end parenthesis
- $read = trim(substr ($read, strpos(strtolower($read), 'bodystructure') + 13));
- $read = trim(substr ($read, 0, -1));
- $end = mime_match_parenthesis(0, $read);
- while ($end == strlen($read)-1) {
- $read = trim(substr ($read, 0, -1));
- $read = trim(substr ($read, 1));
- $end = mime_match_parenthesis(0, $read);
- }
+ function addEntity ($msg) {
+ $this->entities[] = $msg;
+ }
+}
+
+/* --------------------------------------------------------------------------------- */
+/* MIME DECODING */
+/* --------------------------------------------------------------------------------- */
+
+/* This function gets the structure of a message and stores it in the "message" class.
+ * It will return this object for use with all relevant header information and
+ * fully parsed into the standard "message" object format.
+ */
+function mime_structure ($imap_stream, $header) {
+
+ $ssid = sqimap_session_id();
+ $lsid = strlen( $ssid );
+ $id = $header->id;
+ fputs ($imap_stream, "$ssid FETCH $id BODYSTRUCTURE\r\n");
+ //
+ // This should use sqimap_read_data instead of reading it itself
+ //
+ $read = fgets ($imap_stream, 9216);
+ $bodystructure = '';
+ while ( substr($read, 0, $lsid) <> $ssid &&
+ !feof( $imap_stream ) ) {
+ $bodystructure .= $read;
+ $read = fgets ($imap_stream, 9216);
+ }
+ $read = $bodystructure;
+
+ // isolate the body structure and remove beginning and end parenthesis
+ $read = trim(substr ($read, strpos(strtolower($read), 'bodystructure') + 13));
+ $read = trim(substr ($read, 0, -1));
+ $end = mime_match_parenthesis(0, $read);
+ while ($end == strlen($read)-1) {
+ $read = trim(substr ($read, 0, -1));
+ $read = trim(substr ($read, 1));
+ $end = mime_match_parenthesis(0, $read);
+ }
- $msg = mime_parse_structure ($read, 0);
- $msg->header = $header;
- return $msg;
- }
-
- // this starts the parsing of a particular structure. It is called recursively,
- // so it can be passed different structures. It returns an object of type
- // $message.
- // First, it checks to see if it is a multipart message. If it is, then it
- // handles that as it sees is necessary. If it is just a regular entity,
- // then it parses it and adds the necessary header information (by calling out
- // to mime_get_elements()
- function mime_parse_structure ($structure, $ent_id) {
-
- $msg = new message();
- if ($structure{0} == '(') {
- $ent_id = mime_new_element_level($ent_id);
- $start = $end = -1;
- do {
- $start = $end+1;
- $end = mime_match_parenthesis ($start, $structure);
-
- $element = substr($structure, $start+1, ($end - $start)-1);
- $ent_id = mime_increment_id ($ent_id);
- $newmsg = mime_parse_structure ($element, $ent_id);
- $msg->addEntity ($newmsg);
- } while ($structure{$end+1} == '(');
- } else {
- // parse the elements
- $msg = mime_get_element ($structure, $msg, $ent_id);
- }
- return $msg;
- }
-
- // Increments the element ID. An element id can look like any of
- // the following: 1, 1.2, 4.3.2.4.1, etc. This function increments
- // the last number of the element id, changing 1.2 to 1.3.
- function mime_increment_id ($id) {
-
- if (strpos($id, ".")) {
- $first = substr($id, 0, strrpos($id, "."));
- $last = substr($id, strrpos($id, ".")+1);
- $last++;
- $new = $first . "." .$last;
- } else {
- $new = $id + 1;
- }
+ $msg = mime_parse_structure ($read, 0);
+ $msg->header = $header;
+
+ return( $msg );
+}
+
+/* this starts the parsing of a particular structure. It is called recursively,
+ * so it can be passed different structures. It returns an object of type
+ * $message.
+ * First, it checks to see if it is a multipart message. If it is, then it
+ * handles that as it sees is necessary. If it is just a regular entity,
+ * then it parses it and adds the necessary header information (by calling out
+ * to mime_get_elements()
+ */
+function mime_parse_structure ($structure, $ent_id) {
+
+ $msg = new message();
+ if ($structure{0} == '(') {
+ $ent_id = mime_new_element_level($ent_id);
+ $start = $end = -1;
+ do {
+ $start = $end+1;
+ $end = mime_match_parenthesis ($start, $structure);
+
+ $element = substr($structure, $start+1, ($end - $start)-1);
+ $ent_id = mime_increment_id ($ent_id);
+ $newmsg = mime_parse_structure ($element, $ent_id);
+ $msg->addEntity ($newmsg);
+ } while ($structure{$end+1} == '(');
+ } else {
+ // parse the elements
+ $msg = mime_get_element ($structure, $msg, $ent_id);
+ }
+ return $msg;
+}
+
+/* Increments the element ID. An element id can look like any of
+ * the following: 1, 1.2, 4.3.2.4.1, etc. This function increments
+ * the last number of the element id, changing 1.2 to 1.3.
+ */
+function mime_increment_id ($id) {
+
+ if (strpos($id, '.')) {
+ $first = substr($id, 0, strrpos($id, '.'));
+ $last = substr($id, strrpos($id, '.')+1);
+ $last++;
+ $new = $first . '.' .$last;
+ } else {
+ $new = $id + 1;
+ }
- return $new;
- }
-
- // See comment for mime_increment_id().
- // This adds another level on to the entity_id changing 1.3 to 1.3.0
- // NOTE: 1.3.0 is not a valid element ID. It MUST be incremented
- // before it can be used. I left it this way so as not to have
- // to make a special case if it is the first entity_id. It
- // always increments it, and that works fine.
- function mime_new_element_level ($id) {
-
- if (!$id) {
- $id = 0;
- } else {
- $id = $id . '.0';
- }
+ return $new;
+}
+
+/*
+ * See comment for mime_increment_id().
+ * This adds another level on to the entity_id changing 1.3 to 1.3.0
+ * NOTE: 1.3.0 is not a valid element ID. It MUST be incremented
+ * before it can be used. I left it this way so as not to have
+ * to make a special case if it is the first entity_id. It
+ * always increments it, and that works fine.
+ */
+function mime_new_element_level ($id) {
+
+ if (!$id) {
+ $id = 0;
+ } else {
+ $id = $id . '.0';
+ }
- return( $id );
- }
-
- function mime_get_element (&$structure, $msg, $ent_id) {
-
- $elem_num = 1;
- $msg->header = new msg_header();
- $msg->header->entity_id = $ent_id;
- $properties = array();
-
- while (strlen($structure) > 0) {
- $structure = trim($structure);
- $char = $structure{0};
-
- if (strtolower(substr($structure, 0, 3)) == 'nil') {
- $text = '';
- $structure = substr($structure, 3);
- } else if ($char == '"') {
- // loop through until we find the matching quote, and return that as a string
- $pos = 1;
- $text = '';
- while ( ($char = $structure{$pos} ) <> '"' && $pos < strlen($structure)) {
- $text .= $char;
- $pos++;
- }
- $structure = substr($structure, strlen($text) + 2);
- } else if ($char == '(') {
- // comment me
- $end = mime_match_parenthesis (0, $structure);
- $sub = substr($structure, 1, $end-1);
- $properties = mime_get_props($properties, $sub);
- $structure = substr($structure, strlen($sub) + 2);
- } else {
- // loop through until we find a space or an end parenthesis
- $pos = 0;
- $char = $structure{$pos};
- $text = '';
- while ($char != ' ' && $char != ')' && $pos < strlen($structure)) {
- $text .= $char;
- $pos++;
- $char = $structure{$pos};
- }
- $structure = substr($structure, strlen($text));
- }
-
- // This is where all the text parts get put into the header
- switch ($elem_num) {
- case 1:
- $msg->header->type0 = strtolower($text);
- break;
- case 2:
- $msg->header->type1 = strtolower($text);
- break;
- case 4: // Id
- // Invisimail enclose images with <>
- $msg->header->id = str_replace( '<', '', str_replace( '>', '', $text ) );
- break;
- case 5:
- $msg->header->description = $text;
- break;
- case 6:
- $msg->header->encoding = strtolower($text);
- break;
- case 7:
- $msg->header->size = $text;
- break;
- default:
- if ($msg->header->type0 == 'text' && $elem_num == 8) {
- // This is a plain text message, so lets get the number of lines
- // that it contains.
- $msg->header->num_lines = $text;
-
- } else if ($msg->header->type0 == 'message' && $msg->header->type1 == 'rfc822' && $elem_num == 8) {
- // This is an encapsulated message, so lets start all over again and
- // parse this message adding it on to the existing one.
- $structure = trim($structure);
- if ( $structure{0} == '(' ) {
- $e = mime_match_parenthesis (0, $structure);
- $structure = substr($structure, 0, $e);
- $structure = substr($structure, 1);
- $m = mime_parse_structure($structure, $msg->header->entity_id);
-
- // the following conditional is there to correct a bug that wasn't
- // incrementing the entity IDs correctly because of the special case
- // that message/rfc822 is. This fixes it fine.
- if (substr($structure, 1, 1) != '(')
- $m->header->entity_id = mime_increment_id(mime_new_element_level($ent_id));
-
- // Now we'll go through and reformat the results.
- if ($m->entities) {
- for ($i=0; $i < count($m->entities); $i++) {
- $msg->addEntity($m->entities[$i]);
- }
- } else {
- $msg->addEntity($m);
- }
- $structure = "";
- }
- }
- break;
- }
- $elem_num++;
- $text = "";
- }
- // loop through the additional properties and put those in the various headers
- if ($msg->header->type0 != 'message') {
- for ($i=0; $i < count($properties); $i++) {
- $msg->header->{$properties[$i]['name']} = $properties[$i]['value'];
- }
- }
+ return( $id );
+}
+
+function mime_get_element (&$structure, $msg, $ent_id) {
+
+ $elem_num = 1;
+ $msg->header = new msg_header();
+ $msg->header->entity_id = $ent_id;
+ $properties = array();
+
+ while (strlen($structure) > 0) {
+ $structure = trim($structure);
+ $char = $structure{0};
+
+ if (strtolower(substr($structure, 0, 3)) == 'nil') {
+ $text = '';
+ $structure = substr($structure, 3);
+ } else if ($char == '"') {
+ // loop through until we find the matching quote, and return that as a string
+ $pos = 1;
+ $text = '';
+ while ( ($char = $structure{$pos} ) <> '"' && $pos < strlen($structure)) {
+ $text .= $char;
+ $pos++;
+ }
+ $structure = substr($structure, strlen($text) + 2);
+ } else if ($char == '(') {
+ // comment me
+ $end = mime_match_parenthesis (0, $structure);
+ $sub = substr($structure, 1, $end-1);
+ $properties = mime_get_props($properties, $sub);
+ $structure = substr($structure, strlen($sub) + 2);
+ } else {
+ // loop through until we find a space or an end parenthesis
+ $pos = 0;
+ $char = $structure{$pos};
+ $text = '';
+ while ($char != ' ' && $char != ')' && $pos < strlen($structure)) {
+ $text .= $char;
+ $pos++;
+ $char = $structure{$pos};
+ }
+ $structure = substr($structure, strlen($text));
+ }
- return $msg;
- }
-
- // I did most of the MIME stuff yesterday (June 20, 2000), but I couldn't
- // figure out how to do this part, so I decided to go to bed. I woke up
- // in the morning and had a flash of insight. I went to the white-board
- // and scribbled it out, then spent a bit programming it, and this is the
- // result. Nothing complicated, but I think my brain was fried yesterday.
- // Funny how that happens some times.
- //
- // This gets properties in a nested parenthesisized list. For example,
- // this would get passed something like: ("attachment" ("filename" "luke.tar.gz"))
- // This returns an array called $props with all paired up properties.
- // It ignores the "attachment" for now, maybe that should change later
- // down the road. In this case, what is returned is:
- // $props[0]["name"] = "filename";
- // $props[0]["value"] = "luke.tar.gz";
- function mime_get_props ($props, $structure) {
-
- while (strlen($structure) > 0) {
- $structure = trim($structure);
- $char = $structure{0};
-
- if ($char == '"') {
- $pos = 1;
- $tmp = '';
- while ( ( $char = $structure{$pos} ) != '"' &&
- $pos < strlen($structure)) {
- $tmp .= $char;
- $pos++;
- }
- $structure = trim(substr($structure, strlen($tmp) + 2));
- $char = $structure{0};
-
- if ($char == '"') {
- $pos = 1;
- $value = '';
- while ( ( $char = $structure{$pos} ) != '"' &&
- $pos < strlen($structure) ) {
- $value .= $char;
- $pos++;
- }
- $structure = trim(substr($structure, strlen($tmp) + 2));
-
- $k = count($props);
- $props[$k]['name'] = strtolower($tmp);
- $props[$k]['value'] = $value;
- } else if ($char == '(') {
- $end = mime_match_parenthesis (0, $structure);
- $sub = substr($structure, 1, $end-1);
- if (! isset($props))
- $props = array();
- $props = mime_get_props($props, $sub);
- $structure = substr($structure, strlen($sub) + 2);
- }
- return $props;
- } else if ($char == '(') {
- $end = mime_match_parenthesis (0, $structure);
- $sub = substr($structure, 1, $end-1);
- $props = mime_get_props($props, $sub);
- $structure = substr($structure, strlen($sub) + 2);
- return $props;
- } else {
- return $props;
- }
- }
- }
-
- // Matches parenthesis. It will return the position of the matching
- // parenthesis in $structure. For instance, if $structure was:
- // ("text" "plain" ("val1name", "1") nil ... )
- // x x
- // then this would return 42 to match up those two.
- function mime_match_parenthesis ($pos, $structure) {
-
- $j = strlen( $structure );
-
- // ignore all extra characters
- // If inside of a string, skip string -- Boundary IDs and other
- // things can have ) in them.
- if( $structure{$pos} != '(' )
- return( $j );
-
- while( $pos < $j ) {
- $pos++;
- if ($structure{$pos} == ')') {
+ // This is where all the text parts get put into the header
+ switch ($elem_num) {
+ case 1:
+ $msg->header->type0 = strtolower($text);
+ break;
+ case 2:
+ $msg->header->type1 = strtolower($text);
+ break;
+ case 4: // Id
+ // Invisimail enclose images with <>
+ $msg->header->id = str_replace( '<', '', str_replace( '>', '', $text ) );
+ break;
+ case 5:
+ $msg->header->description = $text;
+ break;
+ case 6:
+ $msg->header->encoding = strtolower($text);
+ break;
+ case 7:
+ $msg->header->size = $text;
+ break;
+ default:
+ if ($msg->header->type0 == 'text' && $elem_num == 8) {
+ // This is a plain text message, so lets get the number of lines
+ // that it contains.
+ $msg->header->num_lines = $text;
+
+ } else if ($msg->header->type0 == 'message' && $msg->header->type1 == 'rfc822' && $elem_num == 8) {
+ // This is an encapsulated message, so lets start all over again and
+ // parse this message adding it on to the existing one.
+ $structure = trim($structure);
+ if ( $structure{0} == '(' ) {
+ $e = mime_match_parenthesis (0, $structure);
+ $structure = substr($structure, 0, $e);
+ $structure = substr($structure, 1);
+ $m = mime_parse_structure($structure, $msg->header->entity_id);
+
+ // the following conditional is there to correct a bug that wasn't
+ // incrementing the entity IDs correctly because of the special case
+ // that message/rfc822 is. This fixes it fine.
+ if (substr($structure, 1, 1) != '(')
+ $m->header->entity_id = mime_increment_id(mime_new_element_level($ent_id));
+
+ // Now we'll go through and reformat the results.
+ if ($m->entities) {
+ for ($i=0; $i < count($m->entities); $i++) {
+ $msg->addEntity($m->entities[$i]);
+ }
+ } else {
+ $msg->addEntity($m);
+ }
+ $structure = "";
+ }
+ }
+ break;
+ }
+ $elem_num++;
+ $text = "";
+ }
+ // loop through the additional properties and put those in the various headers
+// if ($msg->header->type0 != 'message') {
+ for ($i=0; $i < count($properties); $i++) {
+ $msg->header->{$properties[$i]['name']} = $properties[$i]['value'];
+ }
+// }
+
+ return $msg;
+}
+
+/*
+ * I did most of the MIME stuff yesterday (June 20, 2000), but I couldn't
+ * figure out how to do this part, so I decided to go to bed. I woke up
+ * in the morning and had a flash of insight. I went to the white-board
+ * and scribbled it out, then spent a bit programming it, and this is the
+ * result. Nothing complicated, but I think my brain was fried yesterday.
+ * Funny how that happens some times.
+ *
+ * This gets properties in a nested parenthesisized list. For example,
+ * this would get passed something like: ("attachment" ("filename" "luke.tar.gz"))
+ * This returns an array called $props with all paired up properties.
+ * It ignores the "attachment" for now, maybe that should change later
+ * down the road. In this case, what is returned is:
+ * $props[0]["name"] = "filename";
+ * $props[0]["value"] = "luke.tar.gz";
+ */
+function mime_get_props ($props, $structure) {
+
+ while (strlen($structure) > 0) {
+ $structure = trim($structure);
+ $char = $structure{0};
+
+ if ($char == '"') {
+ $pos = 1;
+ $tmp = '';
+ while ( ( $char = $structure{$pos} ) != '"' &&
+ $pos < strlen($structure)) {
+ $tmp .= $char;
+ $pos++;
+ }
+ $structure = trim(substr($structure, strlen($tmp) + 2));
+ $char = $structure{0};
+
+ if ($char == '"') {
+ $pos = 1;
+ $value = '';
+ while ( ( $char = $structure{$pos} ) != '"' &&
+ $pos < strlen($structure) ) {
+ $value .= $char;
+ $pos++;
+ }
+ $structure = trim(substr($structure, strlen($tmp) + 2));
+
+ $k = count($props);
+ $props[$k]['name'] = strtolower($tmp);
+ $props[$k]['value'] = $value;
+ } else if ($char == '(') {
+ $end = mime_match_parenthesis (0, $structure);
+ $sub = substr($structure, 1, $end-1);
+ if (! isset($props))
+ $props = array();
+ $props = mime_get_props($props, $sub);
+ $structure = substr($structure, strlen($sub) + 2);
+ }
+ return $props;
+ } else if ($char == '(') {
+ $end = mime_match_parenthesis (0, $structure);
+ $sub = substr($structure, 1, $end-1);
+ $props = mime_get_props($props, $sub);
+ $structure = substr($structure, strlen($sub) + 2);
+ return $props;
+ } else {
+ return $props;
+ }
+ }
+}
+
+/*
+ * Matches parenthesis. It will return the position of the matching
+ * parenthesis in $structure. For instance, if $structure was:
+ * ("text" "plain" ("val1name", "1") nil ... )
+ * x x
+ * then this would return 42 to match up those two.
+ */
+function mime_match_parenthesis ($pos, $structure) {
+
+ $j = strlen( $structure );
+
+ // ignore all extra characters
+ // If inside of a string, skip string -- Boundary IDs and other
+ // things can have ) in them.
+ if ( $structure{$pos} != '(' ) {
+ return( $j );
+ }
+
+ while ( $pos < $j ) {
+ $pos++;
+ if ($structure{$pos} == ')') {
return $pos;
- } elseif ($structure{$pos} == '"') {
+ } elseif ($structure{$pos} == '"') {
$pos++;
- while( $structure{$pos} != '"' &&
- $pos < $j ) {
- if (substr($structure, $pos, 2) == '\\"')
+ while ( $structure{$pos} != '"' &&
+ $pos < $j ) {
+ if (substr($structure, $pos, 2) == '\\"') {
$pos++;
- elseif (substr($structure, $pos, 2) == '\\\\')
+ } elseif (substr($structure, $pos, 2) == '\\\\') {
$pos++;
+ }
$pos++;
}
- } elseif ( $structure{$pos} == '(' ) {
+ } elseif ( $structure{$pos} == '(' ) {
$pos = mime_match_parenthesis ($pos, $structure);
- }
- }
- echo "Error decoding mime structure. Report this as a bug!
\n";
- return( $pos );
- }
-
- function mime_fetch_body ($imap_stream, $id, $ent_id ) {
- // do a bit of error correction. If we couldn't find the entity id, just guess
- // that it is the first one. That is usually the case anyway.
- if (!$ent_id)
- $ent_id = 1;
- $sid = sqimap_session_id();
- fputs ($imap_stream, "$sid FETCH $id BODY[$ent_id]\r\n");
- $data = sqimap_read_data ($imap_stream, $sid, true, $response, $message);
- $topline = array_shift($data);
- while (! ereg('\\* [0-9]+ FETCH ', $topline) && $data)
- $topline = array_shift($data);
- $wholemessage = implode('', $data);
- if (ereg('\\{([^\\}]*)\\}', $topline, $regs)) {
- $ret = substr( $wholemessage, 0, $regs[1] );
- /*
- There is some information in the content info header that could be important
- in order to parse html messages. Let's get them here.
- */
- if( $ret{0} == '<' ) {
- fputs ($imap_stream, "$sid FETCH $id BODY[$ent_id.MIME]\r\n");
- $data = sqimap_read_data ($imap_stream, $sid, true, $response, $message);
- $base = '';
- $k = 10;
- foreach( $data as $d ) {
- if( substr( $d, 0, 13 ) == 'Content-Base:' ) {
- $j = strlen( $d );
- $i = 13;
- $base = '';
- while( $i < $j &&
- ( !isNoSep( $d{$i} ) || $d{$i} == '"' ) )
- $i++;
- while( $i < $j ) {
- if( isNoSep( $d{$i} ) )
- $base .= $d{$i};
- $i++;
- }
- $k = 0;
- } elseif( $k == 1 && !isnosep( $d{0} ) ) {
- $base .= substr( $d, 1 );
- }
- $k++;
- }
- if( $base <> '' )
- $ret = "" . $ret;
- }
- } else if (ereg('"([^"]*)"', $topline, $regs)) {
- $ret = $regs[1];
- } else {
- global $where, $what, $mailbox, $passed_id, $startMessage;
- $par = "mailbox=".urlencode($mailbox)."&passed_id=$passed_id";
- if (isset($where) && isset($what)) {
- $par .= "&where=".urlencode($where)."&what=".urlencode($what);
- } else {
- $par .= "&startMessage=$startMessage&show_more=0";
- }
- $par .= '&response='.urlencode($response).'&message='.urlencode($message).
- '&topline='.urlencode($topline);
-
- echo 'Body retrieval error. The reason for this is most probably that
' .
- 'the message is malformed. Please help us making future versions
' .
- "better by submitting this message to the developers knowledgebase!
\n" .
- "Submit message
" .
+ }
+ }
+ echo _("Error decoding mime structure. Report this as a bug!") . '
';
+ return( $pos );
+}
+
+function mime_fetch_body($imap_stream, $id, $ent_id ) {
+
+ /*
+ * do a bit of error correction. If we couldn't find the entity id, just guess
+ * that it is the first one. That is usually the case anyway.
+ */
+ if (!$ent_id) {
+ $ent_id = 1;
+ }
- "Response: $response
" .
- "Message: $message
" .
- "FETCH line: $topline
";
+ $cmd = "FETCH $id BODY[$ent_id]";
+ $data = sqimap_run_command ($imap_stream, $cmd, true, $response, $message);
- fputs ($imap_stream, "$sid FETCH $passed_id BODY[]\r\n");
- $data = sqimap_read_data ($imap_stream, $sid, true, $response, $message);
- array_shift($data);
- $wholemessage = implode('', $data);
+ do {
+ $topline = trim(array_shift( $data ));
+ } while( $topline && $topline[0] == '*' && !preg_match( '/\* [0-9]+ FETCH.*/i', $topline )) ;
+ $wholemessage = implode('', $data);
+ if (ereg('\\{([^\\}]*)\\}', $topline, $regs)) {
- $ret = "---------------\n$wholemessage";
-
+ $ret = substr( $wholemessage, 0, $regs[1] );
+ /*
+ There is some information in the content info header that could be important
+ in order to parse html messages. Let's get them here.
+ */
+ if ( $ret{0} == '<' ) {
+ $data = sqimap_run_command ($imap_stream, "FETCH $id BODY[$ent_id.MIME]", true, $response, $message);
+ /* BASE within HTML documents is illegal (see w3 spec)
+* $base = '';
+* $k = 10;
+* foreach( $data as $d ) {
+* if ( substr( $d, 0, 13 ) == 'Content-Base:' ) {
+* $j = strlen( $d );
+* $i = 13;
+* $base = '';
+* while ( $i < $j &&
+* ( !isNoSep( $d{$i} ) || $d{$i} == '"' ) )
+* $i++;
+* while ( $i < $j ) {
+* if ( isNoSep( $d{$i} ) )
+* $base .= $d{$i};
+* $i++;
+* }
+* $k = 0;
+* } elseif ( $k == 1 && !isnosep( $d{0} ) ) {
+* $base .= substr( $d, 1 );
+* }
+* $k++;
+* }
+* if ( $base <> '' ) {
+* $ret = "" . $ret;
+* }
+* */
+ }
+ } else if (ereg('"([^"]*)"', $topline, $regs)) {
+ $ret = $regs[1];
+ } else {
+ global $where, $what, $mailbox, $passed_id, $startMessage;
+ $par = 'mailbox=' . urlencode($mailbox) . "&passed_id=$passed_id";
+ if (isset($where) && isset($what)) {
+ $par .= '&where='. urlencode($where) . "&what=" . urlencode($what);
+ } else {
+ $par .= "&startMessage=$startMessage&show_more=0";
}
- return( $ret );
+ $par .= '&response=' . urlencode($response) .
+ '&message=' . urlencode($message).
+ '&topline=' . urlencode($topline);
+
+ echo '
' .
+ '' .
+ '
' .
+ _("Body retrieval error. The reason for this is most probably that the message is malformed. Please help us making future versions better by submitting this message to the developers knowledgebase!") .
+ " " .
+ _("Submit message") . ' ' .
+ ' |
' .
+ '' . _("Command:") . " | $cmd | " .
+ '' . _("Response:") . " | $response | " .
+ '' . _("Message:") . " | $message | " .
+ '' . _("FETCH line:") . " | $topline | " .
+ "
";
+
+ $data = sqimap_run_command ($imap_stream, "FETCH $passed_id BODY[]", true, $response, $message);
+ array_shift($data);
+ $wholemessage = implode('', $data);
+
+ $ret = $wholemessage;
+ }
+ return( $ret );
+}
+
+function mime_print_body_lines ($imap_stream, $id, $ent_id, $encoding) {
+ // do a bit of error correction. If we couldn't find the entity id, just guess
+ // that it is the first one. That is usually the case anyway.
+ if (!$ent_id) {
+ $ent_id = 1;
}
+ $sid = sqimap_session_id();
+ // Don't kill the connection if the browser is over a dialup
+ // and it would take over 30 seconds to download it.
- function mime_print_body_lines ($imap_stream, $id, $ent_id, $encoding) {
- // do a bit of error correction. If we couldn't find the entity id, just guess
- // that it is the first one. That is usually the case anyway.
- if (!$ent_id) $ent_id = 1;
- $sid = sqimap_session_id();
- // Don't kill the connection if the browser is over a dialup
- // and it would take over 30 seconds to download it.
- set_time_limit(0);
-
- fputs ($imap_stream, "$sid FETCH $id BODY[$ent_id]\r\n");
- $cnt = 0;
- $continue = true;
- $read = fgets ($imap_stream,4096);
- // This could be bad -- if the section has sqimap_session_id() . ' OK'
- // or similar, it will kill the download.
- while (!ereg("^".$sid." (OK|BAD|NO)(.*)$", $read, $regs)) {
- if (trim($read) == ')==') {
- $read1 = $read;
- $read = fgets ($imap_stream,4096);
- if (ereg("^".$sid." (OK|BAD|NO)(.*)$", $read, $regs)) {
- return;
- } else {
- echo decodeBody($read1, $encoding) .
- decodeBody($read, $encoding);
- }
- } else if ($cnt) {
- echo decodeBody($read, $encoding);
- }
+ // donĀ“t call set_time_limit in safe mode.
+ if (!ini_get("safe_mode")) {
+ set_time_limit(0);
+ }
+
+ fputs ($imap_stream, "$sid FETCH $id BODY[$ent_id]\r\n");
+ $cnt = 0;
+ $continue = true;
+ $read = fgets ($imap_stream,4096);
+ // This could be bad -- if the section has sqimap_session_id() . ' OK'
+ // or similar, it will kill the download.
+ while (!ereg("^".$sid." (OK|BAD|NO)(.*)$", $read, $regs)) {
+ if (trim($read) == ')==') {
+ $read1 = $read;
$read = fgets ($imap_stream,4096);
- $cnt++;
+ if (ereg("^".$sid." (OK|BAD|NO)(.*)$", $read, $regs)) {
+ return;
+ } else {
+ echo decodeBody($read1, $encoding) .
+ decodeBody($read, $encoding);
+ }
+ } else if ($cnt) {
+ echo decodeBody($read, $encoding);
}
- }
+ $read = fgets ($imap_stream,4096);
+ $cnt++;
+ }
+}
- /* -[ END MIME DECODING ]----------------------------------------------------------- */
+/* -[ END MIME DECODING ]----------------------------------------------------------- */
- /** This is the first function called. It decides if this is a multipart
- message or if it should be handled as a single entity
- **/
- function decodeMime ($imap_stream, &$header) {
- global $username, $key, $imapServerAddress, $imapPort;
- return mime_structure ($imap_stream, $header);
- }
-
- // This is here for debugging purposese. It will print out a list
- // of all the entity IDs that are in the $message object.
- /*
- function listEntities ($message) {
- if ($message) {
- if ($message->header->entity_id)
- echo "" . $message->header->entity_id . ' : ' . $message->header->type0 . '/' . $message->header->type1 . '
';
- for ($i = 0; $message->entities[$i]; $i++) {
- $msg = listEntities($message->entities[$i], $ent_id);
- if ($msg)
- return $msg;
- }
- }
- }
- */
+/* This is the first function called. It decides if this is a multipart
+ message or if it should be handled as a single entity
+ */
+function decodeMime ($imap_stream, &$header) {
+ global $username, $key, $imapServerAddress, $imapPort;
+ return mime_structure ($imap_stream, $header);
+}
- // returns a $message object for a particular entity id
- function getEntity ($message, $ent_id) {
- if ($message) {
- if ($message->header->entity_id == $ent_id && strlen($ent_id) == strlen($message->header->entity_id)) {
+// This is here for debugging purposese. It will print out a list
+// of all the entity IDs that are in the $message object.
+
+function listEntities ($message) {
+if ($message) {
+ if ($message->header->entity_id)
+ echo "" . $message->header->entity_id . ' : ' . $message->header->type0 . '/' . $message->header->type1 . '
';
+ for ($i = 0; $message->entities[$i]; $i++) {
+ $msg = listEntities($message->entities[$i], $ent_id);
+ if ($msg)
+ return $msg;
+ }
+}
+}
+
+
+/* returns a $message object for a particular entity id */
+function getEntity ($message, $ent_id) {
+ if ($message) {
+ if ($message->header->entity_id == $ent_id && strlen($ent_id) == strlen($message->header->entity_id)) {
return $message;
- } else {
+ } else {
for ($i = 0; isset($message->entities[$i]); $i++) {
- $msg = getEntity ($message->entities[$i], $ent_id);
- if ($msg)
- return $msg;
+ $msg = getEntity ($message->entities[$i], $ent_id);
+ if ($msg) {
+ return $msg;
+ }
}
- }
- }
- }
+ }
+ }
+}
+
+/*
+ * figures out what entity to display and returns the $message object
+ * for that entity.
+ */
+function findDisplayEntity ($message, $textOnly = 1) {
+ global $show_html_default;
+
+ $entity = 0;
+
+ if ($message) {
+ if ( $message->header->type0 == 'multipart' &&
+ ( $message->header->type1 == 'alternative' ||
+ $message->header->type1 == 'mixed' ||
+ $message->header->type1 == 'related' ) &&
+ $show_html_default && ! $textOnly ) {
+ $entity = findDisplayEntityHTML($message);
+ }
- // figures out what entity to display and returns the $message object
- // for that entity.
- function findDisplayEntity ($message, $textOnly = 1) {
- global $show_html_default;
-
- $entity = 0;
-
- if ($message) {
- if ( $message->header->type0 == 'multipart' &&
- ( $message->header->type1 == 'alternative' ||
- $message->header->type1 == 'related' ) &&
- $show_html_default && ! $textOnly ) {
- $entity = findDisplayEntityHTML($message);
+ // Show text/plain or text/html -- the first one we find.
+ if ( $entity == 0 &&
+ $message->header->type0 == 'text' &&
+ ( $message->header->type1 == 'plain' ||
+ $message->header->type1 == 'html' ) &&
+ isset($message->header->entity_id) ) {
+ $entity = $message->header->entity_id;
+ }
+
+ $i = 0;
+ while ($entity == 0 && isset($message->entities[$i]) ) {
+ $entity = findDisplayEntity($message->entities[$i], $textOnly);
+ $i++;
+ }
+ }
+
+ return( $entity );
+}
+
+/* Shows the HTML version */
+function findDisplayEntityHTML ($message) {
+
+ if ( $message->header->type0 == 'text' &&
+ $message->header->type1 == 'html' &&
+ isset($message->header->entity_id)) {
+ return $message->header->entity_id;
+ }
+ for ($i = 0; isset($message->entities[$i]); $i ++) {
+ if ( $message->header->type0 == 'message' &&
+ $message->header->type1 == 'rfc822' &&
+ isset($message->header->entity_id)) {
+ return 0;
+ }
+ $entity = findDisplayEntityHTML($message->entities[$i]);
+ if ($entity != 0) {
+ return $entity;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * translateText
+ * Extracted from strings.php 23/03/2002
+ */
+
+function translateText(&$body, $wrap_at, $charset) {
+ global $where, $what; /* from searching */
+ global $color; /* color theme */
+
+ require_once('../functions/url_parser.php');
+
+ $body_ary = explode("\n", $body);
+ $PriorQuotes = 0;
+ for ($i=0; $i < count($body_ary); $i++) {
+ $line = $body_ary[$i];
+ if (strlen($line) - 2 >= $wrap_at) {
+ sqWordWrap($line, $wrap_at);
+ }
+ $line = charset_decode($charset, $line);
+ $line = str_replace("\t", ' ', $line);
+
+ parseUrl ($line);
+
+ $Quotes = 0;
+ $pos = 0;
+ $j = strlen( $line );
+
+ while ( $pos < $j ) {
+ if ($line[$pos] == ' ') {
+ $pos ++;
+ } else if (strpos($line, '>', $pos) === $pos) {
+ $pos += 4;
+ $Quotes ++;
+ } else {
+ break;
}
-
- // Show text/plain or text/html -- the first one we find.
- if ( $entity == 0 &&
- $message->header->type0 == 'text' &&
- ( $message->header->type1 == 'plain' ||
- $message->header->type1 == 'html' ) &&
- isset($message->header->entity_id) ) {
- $entity = $message->header->entity_id;
+ }
+
+ if ($Quotes > 1) {
+ if (! isset($color[14])) {
+ $color[14] = '#FF0000';
}
-
- $i = 0;
- while ($entity == 0 && isset($message->entities[$i]) ) {
- $entity = findDisplayEntity($message->entities[$i], $textOnly);
- $i++;
+ $line = '' . $line . '';
+ } elseif ($Quotes) {
+ if (! isset($color[13])) {
+ $color[13] = '#800000';
}
+ $line = '' . $line . '';
}
-
- return( $entity );
+
+ $body_ary[$i] = $line;
}
-
- // Shows the HTML version
- function findDisplayEntityHTML ($message) {
- if ($message->header->type0 == 'text' &&
- $message->header->type1 == 'html' &&
- isset($message->header->entity_id))
- return $message->header->entity_id;
- for ($i = 0; isset($message->entities[$i]); $i ++) {
- $entity = findDisplayEntityHTML($message->entities[$i]);
- if ($entity != 0)
- return $entity;
- }
- return 0;
- }
-
- /** This returns a parsed string called $body. That string can then
- be displayed as the actual message in the HTML. It contains
- everything needed, including HTML Tags, Attachments at the
- bottom, etc.
- **/
- function formatBody($imap_stream, $message, $color, $wrap_at) {
- // this if statement checks for the entity to show as the
- // primary message. To add more of them, just put them in the
- // order that is their priority.
- global $startMessage, $username, $key, $imapServerAddress, $imapPort,
- $show_html_default;
-
- $id = $message->header->id;
- $urlmailbox = urlencode($message->header->mailbox);
-
- // Get the right entity and redefine message to be this entity
- // Pass the 0 to mean that we want the 'best' viewable one
- $ent_num = findDisplayEntity ($message, 0);
- $body_message = getEntity($message, $ent_num);
- if (($body_message->header->type0 == 'text') ||
- ($body_message->header->type0 == 'rfc822')) {
-
- $body = mime_fetch_body ($imap_stream, $id, $ent_num);
- $body = decodeBody($body, $body_message->header->encoding);
- $hookResults = do_hook("message_body", $body);
- $body = $hookResults[1];
-
- // If there are other types that shouldn't be formatted, add
- // them here
- if ($body_message->header->type1 == 'html') {
- if( $show_html_default <> 1 ) {
+ $body = '' . implode("\n", $body_ary) . '
';
+}
+
+/* This returns a parsed string called $body. That string can then
+be displayed as the actual message in the HTML. It contains
+everything needed, including HTML Tags, Attachments at the
+bottom, etc.
+*/
+function formatBody($imap_stream, $message, $color, $wrap_at) {
+ // this if statement checks for the entity to show as the
+ // primary message. To add more of them, just put them in the
+ // order that is their priority.
+ global $startMessage, $username, $key, $imapServerAddress, $imapPort, $body,
+ $show_html_default, $has_unsafe_images, $view_unsafe_images, $sort;
+
+ $has_unsafe_images = 0;
+
+ $id = $message->header->id;
+
+ $urlmailbox = urlencode($message->header->mailbox);
+
+ // Get the right entity and redefine message to be this entity
+ // Pass the 0 to mean that we want the 'best' viewable one
+ $ent_num = findDisplayEntity ($message, 0);
+ $body_message = getEntity($message, $ent_num);
+
+ if (($body_message->header->type0 == 'text') ||
+ ($body_message->header->type0 == 'rfc822')) {
+ $body = mime_fetch_body ($imap_stream, $id, $ent_num);
+ $body = decodeBody($body, $body_message->header->encoding);
+ $hookResults = do_hook("message_body", $body);
+ $body = $hookResults[1];
+
+ // If there are other types that shouldn't be formatted, add
+ // them here
+ if ($body_message->header->type1 == 'html') {
+ if ( $show_html_default <> 1 ) {
$body = strip_tags( $body );
translateText($body, $wrap_at, $body_message->header->charset);
} else {
$body = MagicHTML( $body, $id );
}
- } else {
+ } else {
translateText($body, $wrap_at, $body_message->header->charset);
- }
+ }
- $body .= "". _("Download this as a file") ."
";
+ $body .= "". _("Download this as a file") ."
";
+ if ($has_unsafe_images) {
+ if ($view_unsafe_images) {
+ $body .= "". _("Hide Unsafe Images") ."
\n";
+ } else {
+ $body .= "". _("View Unsafe Images") ."
\n";
+ }
+ }
- /** Display the ATTACHMENTS: message if there's more than one part **/
- $body .= "";
- if (isset($message->entities[0])) {
+ /** Display the ATTACHMENTS: message if there's more than one part **/
+ if (isset($message->entities[0])) {
$body .= formatAttachments ($message, $ent_num, $message->header->mailbox, $id);
- }
- $body .= "";
- } else {
- $body = formatAttachments ($message, -1, $message->header->mailbox, $id);
- }
- return( $body );
- }
-
- // A recursive function that returns a list of attachments with links
- // to where to download these attachments
- function formatAttachments ($message, $ent_id, $mailbox, $id) {
- global $where, $what;
- global $startMessage, $color;
- static $ShownHTML = 0;
-
- $body = "";
- if ($ShownHTML == 0) {
- $ShownHTML = 1;
-
- $body .= "\n" .
- "\n" .
- _("Attachments") . ':' .
- " |
\n" .
- "\n" .
- formatAttachments ($message, $ent_id, $mailbox, $id) .
- " |
";
-
- return( $body );
- }
+ }
+ } else {
+ $body = formatAttachments ($message, -1, $message->header->mailbox, $id);
+ }
+ return ($body);
+}
+
+/*
+ * A recursive function that returns a list of attachments with links
+ * to where to download these attachments
+ */
+function formatAttachments($message, $ent_id, $mailbox, $id) {
+ global $where, $what;
+ global $startMessage, $color;
+ static $ShownHTML = 0;
+
+ $body = '';
+ if ($ShownHTML == 0) {
+
+ $ShownHTML = 1;
+ $body .= "\n" .
+ "\n" .
+ _("Attachments") . ':' .
+ " |
\n" .
+ "\n" .
+ formatAttachments($message, $ent_id, $mailbox, $id) .
+ " |
";
+
+ } else if ($message) {
+ $header = $message->header;
+ $type0 = strtolower($header->type0);
+ $type1 = strtolower($header->type1);
+ $name = decodeHeader($header->name);
+
+ if ($type0 =='message' && $type1 = 'rfc822') {
+
+ $filename = decodeHeader($message->header->filename);
+ if (trim($filename) == '') {
+ if (trim($name) == '') {
+ $display_filename = 'untitled-[' . $message->header->entity_id . ']' ;
+ } else {
+ $display_filename = $name;
+ $filename = $name;
+ }
+ } else {
+ $display_filename = $filename;
+ }
+
+ $urlMailbox = urlencode($mailbox);
+ $ent = urlencode($message->header->entity_id);
+
+ $DefaultLink =
+ "../src/download.php?startMessage=$startMessage&passed_id=$id&mailbox=$urlMailbox&passed_ent_id=$ent";
+ if ($where && $what) {
+ $DefaultLink .= '&where=' . urlencode($where) . '&what=' . urlencode($what);
+ }
+ $Links['download link']['text'] = _("download");
+ $Links['download link']['href'] =
+ "../src/download.php?absolute_dl=true&passed_id=$id&mailbox=$urlMailbox&passed_ent_id=$ent";
+ $ImageURL = '';
+
+ /* this executes the attachment hook with a specific MIME-type.
+ * if that doens't have results, it tries if there's a rule
+ * for a more generic type. */
+ $HookResults = do_hook("attachment $type0/$type1", $Links,
+ $startMessage, $id, $urlMailbox, $ent, $DefaultLink, $display_filename, $where, $what);
+ if(count($HookResults[1]) <= 1) {
+ $HookResults = do_hook("attachment $type0/*", $Links,
+ $startMessage, $id, $urlMailbox, $ent, $DefaultLink,
+ $display_filename, $where, $what);
+ }
+
+ $Links = $HookResults[1];
+ $DefaultLink = $HookResults[6];
+
+ $body .= ' | ' .
+ "$display_filename | " .
+ '' . show_readable_size($message->header->size) .
+ ' | ' .
+ "[ $type0/$type1 ] | " .
+ '';
+ if ($message->header->description) {
+ $body .= '' . htmlspecialchars(_($message->header->description)) . '';
+ }
+ $body .= ' | ';
+
+
+ $SkipSpaces = 1;
+ foreach ($Links as $Val) {
+ if ($SkipSpaces) {
+ $SkipSpaces = 0;
+ } else {
+ $body .= ' | ';
+ }
+ $body .= '' . $Val['text'] . '';
+ }
+
+ unset($Links);
+
+ $body .= " |
\n";
+
+ return( $body );
+
+ } elseif (!$message->entities) {
- if ($message) {
- if (!$message->entities) {
$type0 = strtolower($message->header->type0);
$type1 = strtolower($message->header->type1);
$name = decodeHeader($message->header->name);
if ($message->header->entity_id != $ent_id) {
- $filename = decodeHeader($message->header->filename);
- if (trim($filename) == '') {
- if (trim($name) == '') {
- if( trim( $message->header->id ) == '' )
+ $filename = decodeHeader($message->header->filename);
+ if (trim($filename) == '') {
+ if (trim($name) == '') {
+ if ( trim( $message->header->id ) == '' )
$display_filename = 'untitled-[' . $message->header->entity_id . ']' ;
- else
+ else
$display_filename = 'cid: ' . $message->header->id;
- // $display_filename = 'untitled-[' . $message->header->entity_id . ']' ;
- } else {
- $display_filename = $name;
- $filename = $name;
- }
- } else {
- $display_filename = $filename;
- }
-
- $urlMailbox = urlencode($mailbox);
- $ent = urlencode($message->header->entity_id);
+ // $display_filename = 'untitled-[' . $message->header->entity_id . ']' ;
+ } else {
+ $display_filename = $name;
+ $filename = $name;
+ }
+ } else {
+ $display_filename = $filename;
+ }
- $DefaultLink =
- "../src/download.php?startMessage=$startMessage&passed_id=$id&mailbox=$urlMailbox&passed_ent_id=$ent";
- if ($where && $what)
- $DefaultLink .= '&where=' . urlencode($where) . '&what=' . urlencode($what);
- $Links['download link']['text'] = _("download");
- $Links['download link']['href'] =
- "../src/download.php?absolute_dl=true&passed_id=$id&mailbox=$urlMailbox&passed_ent_id=$ent";
- $ImageURL = '';
+ $urlMailbox = urlencode($mailbox);
+ $ent = urlencode($message->header->entity_id);
- $HookResults = do_hook("attachment $type0/$type1", $Links,
- $startMessage, $id, $urlMailbox, $ent, $DefaultLink,
- $display_filename, $where, $what);
+ $DefaultLink =
+ "../src/download.php?startMessage=$startMessage&passed_id=$id&mailbox=$urlMailbox&passed_ent_id=$ent";
+ if ($where && $what) {
+ $DefaultLink .= '&where=' . urlencode($where) . '&what=' . urlencode($what);
+ }
+ $Links['download link']['text'] = _("download");
+ $Links['download link']['href'] =
+ "../src/download.php?absolute_dl=true&passed_id=$id&mailbox=$urlMailbox&passed_ent_id=$ent";
+ $ImageURL = '';
+
+ /* this executes the attachment hook with a specific MIME-type.
+ * if that doens't have results, it tries if there's a rule
+ * for a more generic type. */
+ $HookResults = do_hook("attachment $type0/$type1", $Links,
+ $startMessage, $id, $urlMailbox, $ent, $DefaultLink,
+ $display_filename, $where, $what);
+ if(count($HookResults[1]) <= 1) {
+ $HookResults = do_hook("attachment $type0/*", $Links,
+ $startMessage, $id, $urlMailbox, $ent, $DefaultLink,
+ $display_filename, $where, $what);
+ }
- $Links = $HookResults[1];
- $DefaultLink = $HookResults[6];
+ $Links = $HookResults[1];
+ $DefaultLink = $HookResults[6];
- $body .= ' | ' .
+ $body .= ' |
| ' .
"$display_filename | " .
'' . show_readable_size($message->header->size) .
' | ' .
"[ $type0/$type1 ] | " .
'';
- if ($message->header->description)
- $body .= '' . htmlspecialchars($message->header->description) . '';
- $body .= ' | ';
-
-
- $SkipSpaces = 1;
- foreach ($Links as $Val) {
- if ($SkipSpaces) {
- $SkipSpaces = 0;
- } else {
- $body .= ' | ';
- }
- $body .= '' . $Val['text'] . '';
- }
+ if ($message->header->description) {
+ $body .= '' . htmlspecialchars(_($message->header->description)) . '';
+ }
+ $body .= ' | ';
- unset($Links);
- $body .= " |
\n";
+ $SkipSpaces = 1;
+ foreach ($Links as $Val) {
+ if ($SkipSpaces) {
+ $SkipSpaces = 0;
+ } else {
+ $body .= ' | ';
+ }
+ $body .= '' . $Val['text'] . '';
}
- } else {
+
+ unset($Links);
+
+ $body .= "\n";
+ }
+ } else {
for ($i = 0; $i < count($message->entities); $i++) {
- $body .= formatAttachments ($message->entities[$i], $ent_id, $mailbox, $id);
+ $body .= formatAttachments($message->entities[$i], $ent_id, $mailbox, $id);
}
- }
- return( $body );
- }
- }
+ }
+ }
+ return( $body );
+}
- /** this function decodes the body depending on the encoding type. **/
- function decodeBody($body, $encoding) {
- $body = str_replace("\r\n", "\n", $body);
- $encoding = strtolower($encoding);
+/** this function decodes the body depending on the encoding type. **/
+function decodeBody($body, $encoding) {
+ $body = str_replace("\r\n", "\n", $body);
+ $encoding = strtolower($encoding);
- global $show_html_default;
+ global $show_html_default;
- if ($encoding == 'quoted-printable') {
- $body = quoted_printable_decode($body);
-
-
- /*
- Following code has been comented as I see no reason for it.
- If there is any please tell me a mingo@rotedic.com
-
- while (ereg("=\n", $body))
- $body = ereg_replace ("=\n", "", $body);
- */
- } else if ($encoding == 'base64') {
- $body = base64_decode($body);
- }
+ if ($encoding == 'quoted-printable') {
+ $body = quoted_printable_decode($body);
+
+
+ while (ereg("=\n", $body))
+ $body = ereg_replace ("=\n", "", $body);
+
+ } else if ($encoding == 'base64') {
+ $body = base64_decode($body);
+ }
- // All other encodings are returned raw.
- return $body;
- }
+ // All other encodings are returned raw.
+ return $body;
+}
+/*
+ * This functions decode strings that is encoded according to
+ * RFC1522 (MIME Part Two: Message Header Extensions for Non-ASCII Text).
+ */
+function decodeHeader ($string, $utfencode=true) {
- // This functions decode strings that is encoded according to
- // RFC1522 (MIME Part Two: Message Header Extensions for Non-ASCII Text).
- function decodeHeader ($string) {
- if (eregi('=\\?([^?]+)\\?(q|b)\\?([^?]+)\\?=',
- $string, $res)) {
- if (ucfirst($res[2]) == "B") {
- $replace = base64_decode($res[3]);
- } else {
- $replace = ereg_replace("_", " ", $res[3]);
+if ( is_array( $string ) ) {
+ $string = implode("\n", $string );
+}
+
+if (eregi('=\\?([^?]+)\\?(q|b)\\?([^?]+)\\?=',
+ $string, $res)) {
+ if (ucfirst($res[2]) == 'B') {
+ $replace = base64_decode($res[3]);
+ } else {
+ $replace = str_replace('_', ' ', $res[3]);
// Convert lowercase Quoted Printable to uppercase for
// quoted_printable_decode to understand it.
- while (ereg("(=(([0-9][abcdef])|([abcdef][0-9])|([abcdef][abcdef])))", $replace, $res)) {
- $replace = str_replace($res[1], strtoupper($res[1]), $replace);
+ while (ereg("(=(([0-9][abcdef])|([abcdef][0-9])|([abcdef][abcdef])))",
+ $replace, $res)) {
+ $replace = str_replace($res[1], strtoupper($res[1]), $replace);
}
- $replace = quoted_printable_decode($replace);
- }
-
- $replace = charset_decode ($res[1], $replace);
-
- // Remove the name of the character set.
- $string = eregi_replace ('=\\?([^?]+)\\?(q|b)\\?([^?]+)\\?=',
- $replace, $string);
-
- // In case there should be more encoding in the string: recurse
- return (decodeHeader($string));
- } else
- return ($string);
- }
-
- // Encode a string according to RFC 1522 for use in headers if it
- // contains 8-bit characters or anything that looks like it should
- // be encoded.
- function encodeHeader ($string) {
- global $default_charset;
-
- // Encode only if the string contains 8-bit characters or =?
- $j = strlen( $string );
- $l = FALSE; // Must be encoded ?
- $ret = '';
- for( $i=0; $i < $j; ++$i) {
+ $replace = quoted_printable_decode($replace);
+ }
+ /* Only encode into entities by default. Some places
+ don't need the encoding, like the compose form. */
+ if ($utfencode){
+ $replace = charset_decode ($res[1], $replace);
+ }
+
+ // Remove the name of the character set.
+ $string = eregi_replace ('=\\?([^?]+)\\?(q|b)\\?([^?]+)\\?=',
+ $replace, $string);
+
+ // In case there should be more encoding in the string: recurse
+ $string = decodeHeader($string);
+}
+
+return ($string);
+}
+
+/*
+ * Encode a string according to RFC 1522 for use in headers if it
+ * contains 8-bit characters or anything that looks like it should
+ * be encoded.
+ */
+function encodeHeader ($string) {
+ global $default_charset;
+
+ // Encode only if the string contains 8-bit characters or =?
+ $j = strlen( $string );
+ $l = strstr($string, '=?'); // Must be encoded ?
+ $ret = '';
+ for( $i=0; $i < $j; ++$i) {
switch( $string{$i} ) {
case '=':
$ret .= '=3D';
break;
- case '?':
- $l = TRUE;
+ case '?':
$ret .= '=3F';
break;
- case '_':
+ case '_':
$ret .= '=5F';
break;
- case ' ':
+ case ' ':
$ret .= '_';
break;
- default:
+ default:
$k = ord( $string{$i} );
- if( $k > 126 ) {
+ if ( $k > 126 ) {
$ret .= sprintf("=%02X", $k);
$l = TRUE;
} else
$ret .= $string{$i};
}
- }
+ }
- if( $l )
+ if ( $l ) {
$string = "=?$default_charset?Q?$ret?=";
+ }
- return( $string );
- }
+ return( $string );
+}
- /*
+/*
Strips dangerous tags from html messages.
- */
-
- function MagicHTML( $body, $id ) {
-
- global $message, $PHP_SELF, $HTTP_SERVER_VARS;
-
- $j = strlen( $body ); // Legnth of the HTML
- $ret = ''; // Returned string
- $bgcolor = '#ffffff'; // Background style color (defaults to white)
- $textcolor = '#000000'; // Foreground style color (defaults to black)
- $leftmargin = ''; // Left margin style
- $title = ''; // HTML title if any
-
- $i = 0;
- while( $i < $j ) {
- if( $body{$i} == '<' ) {
- $pos = $i + 1;
- $tag = '';
- while ($body{$pos} == ' ' || $body{$pos} == "\t" ||
- $body{$pos} == "\n")
- $pos ++;
- while (strlen($tag) < 4 && $body{$pos} != ' ' &&
- $body{$pos} != "\t" && $body{$pos} != "\n") {
- $tag .= $body{$pos};
- $pos ++;
- }
- switch( strtoupper( $tag ) ) {
- // Strips the entire tag and contents
- case 'APPL':
- case 'EMBB':
- case 'FRAM':
- case 'SCRI':
- case 'OBJE':
- $etg = '/' . $tag;
- while( $body{$i+1}.$body{$i+2}.$body{$i+3}.$body{$i+4}.$body{$i+5} <> $etg &&
- $i < $j ) $i++;
- while( $i < $j && $body{++$i} <> '>' );
- // $ret .= "";
- break;
- // Substitute Title
- case 'TITL':
- $i += 5;
- while( $body{$i} <> '>' && //
- $i < $j )
- $i++;
+*/
+function MagicHTML( $body, $id ) {
+
+ global $message, $HTTP_SERVER_VARS,
+ $attachment_common_show_images;
+
+ $attachment_common_show_images =
+ FALSE; // Don't display attached images in HTML mode
+ $j = strlen( $body ); // Legnth of the HTML
+ $ret = ''; // Returned string
+ $bgcolor = '#ffffff'; // Background style color (defaults to white)
+ $textcolor = '#000000'; // Foreground style color (defaults to black)
+ $leftmargin = ''; // Left margin style
+ $title = ''; // HTML title if any
+
+ $i = 0;
+ while ( $i < $j ) {
+ if ( $body{$i} == '<' ) {
+ $pos = $i + 1;
+ $tag = '';
+ while ($body{$pos} == ' ' || $body{$pos} == "\t" ||
+ $body{$pos} == "\n" ) {
+ $pos ++;
+ }
+ while (strlen($tag) < 4 && $body{$pos} != ' ' &&
+ $body{$pos} != "\t" && $body{$pos} != "\n" &&
+ $pos < $j ) {
+ $tag .= $body{$pos};
+ $pos ++;
+ }
+ /*
+ A comment in HTML is only three characters and isn't
+ guaranteed to have a space after it. This fudges so
+ it will be caught by the switch statement.
+ */
+ if (ereg("!--", $tag)) {
+ $tag = "!-- ";
+ }
+ switch( strtoupper( $tag ) ) {
+ // Strips the entire tag and contents
+ case 'APPL':
+ case 'EMBE':
+ case 'FRAM':
+ case 'SCRI':
+ case 'OBJE':
+ $etg = '/' . $tag;
+ while ( $body{$i+1}.$body{$i+2}.$body{$i+3}.$body{$i+4}.$body{$i+5} <> $etg &&
+ $i < $j ) $i++;
+ while ( $i < $j && $body{++$i} <> '>' );
+ // $ret .= "";
+ break;
+ // Substitute Title
+ case 'TITL':
+ $i += 5;
+ while ( $body{$i} <> '>' && //
+ $i < $j )
$i++;
- $title = '';
- while( $body{$i} <> '<' && //
+ $i++;
+ $title = '';
+ while ( $body{$i} <> '<' && //
+ $i < $j ) {
+ $title .= $body{$i};
+ $i++;
+ }
+ $i += 7;
+ break;
+ // Destroy these tags
+ case 'HTML':
+ case 'HEAD':
+ case '/HTM':
+ case '/HEA':
+ case '!DOC':
+ case 'META':
+ //case 'DIV ':
+ //case '/DIV':
+ case '!-- ':
+ $i += 4;
+ while ( $body{$i} <> '>' &&
+ $i < $j )
+ $i++;
+ // $i++;
+ break;
+ case 'STYL':
+ $i += 5;
+ while ( $body{$i} <> '>' && //
+ $i < $j )
+ $i++;
+ $i++;
+ // We parse the style to look for interesting stuff
+ $styleblk = '';
+ while ( $body{$i} <> '>' &&
+ $i < $j ) {
+ // First we get the name of the style
+ $style = '';
+ while ( $body{$i} <> '>' &&
+ $body{$i} <> '<' &&
+ $body{$i} <> '{' &&
+ $i < $j ) {
+ if ( isnoSep( $body{$i} ) )
+ $style .= $body{$i};
+ $i++;
+ }
+ stripComments( $i, $j, $body );
+ $style = strtoupper( trim( $style ) );
+ if ( $style == 'BODY' ) {
+ // Next we look into the definitions of the body style
+ while ( $body{$i} <> '>' &&
+ $body{$i} <> '}' &&
$i < $j ) {
- $title .= $body{$i};
+ // We look for the background color if any.
+ if ( substr( $body, $i, 17 ) == 'BACKGROUND-COLOR:' ) {
+ $i += 17;
+ $bgcolor = getStyleData( $i, $j, $body );
+ } elseif ( substr( $body, $i, 12 ) == 'MARGIN-LEFT:' ) {
+ $i += 12;
+ $leftmargin = getStyleData( $i, $j, $body );
+ }
$i++;
}
- $i += 7;
- break;
- // Destroy these tags
- case 'HTML':
- case 'HEAD':
- case '/HTM':
- case '/HEA':
- case '!DOC':
- case 'META':
- case 'DIV ':
- case '/DIV':
- case '!-- ':
- $i += 4;
- while( $body{$i} <> '>' &&
- $i < $j )
+ } else {
+ // Other style are mantained
+ $styleblk .= "$style ";
+ while ( $body{$i} <> '>' &&
+ $body{$i} <> '<' &&
+ $body{$i} <> '}' &&
+ $i < $j ) {
+ $styleblk .= $body{$i};
$i++;
- // $i++;
- break;
- case 'STYL':
+ }
+ $styleblk .= $body{$i};
+ }
+ stripComments( $i, $j, $body );
+ if ( $body{$i} <> '>' )
+ $i++;
+ }
+ if ( $styleblk <> '' )
+ $ret .= "