* This contains the functions necessary to detect and decode MIME
* messages.
*
- * @copyright © 1999-2007 The SquirrelMail Project Team
+ * @copyright 1999-2012 The SquirrelMail Project Team
* @license http://opensource.org/licenses/gpl-license.php GNU Public License
* @version $Id$
* @package squirrelmail
if (strtolower($flag) == '\\flagged') {
$msg->is_flagged = true;
}
+ else if (strtolower($flag) == '$forwarded') {
+ $msg->is_forwarded = true;
+ }
break;
case 'M':
if (strtolower($flag) == '$mdnsent') {
$data = sqimap_run_command ($imap_stream, $cmd, true, $response, $message, TRUE);
do {
$topline = trim(array_shift($data));
- } while($topline && ($topline[0] == '*') && !preg_match('/\* [0-9]+ FETCH.*/i', $topline)) ;
+ } while($topline && ($topline[0] == '*') && !preg_match('/\* [0-9]+ FETCH .*BODY.*/i', $topline)) ;
+ // Matching with "BODY" above is difficult: in most cases "FETCH \(BODY" would work
+ // but some servers may put other things in the same result, perhaps something such
+ // as "* 23 FETCH (FLAGS (\Seen) BODY[1] {174}". There is some small chance that
+ // if the character sequence "BODY" appears in a response where it isn't actually
+ // a FETCH response data item name, the current regex will break things. The better
+ // way to do this would be to parse the response correctly and not use a regex.
$wholemessage = implode('', $data);
- if (ereg('\\{([^\\}]*)\\}', $topline, $regs)) {
+ if (preg_match('/\{([^\}]*)\}/', $topline, $regs)) {
$ret = substr($wholemessage, 0, $regs[1]);
/* There is some information in the content info header that could be important
* in order to parse html messages. Let's get them here.
// if ($ret{0} == '<') {
// $data = sqimap_run_command ($imap_stream, "FETCH $id BODY[$ent_id.MIME]", true, $response, $message, TRUE);
// }
- } else if (ereg('"([^"]*)"', $topline, $regs)) {
+ } else if (preg_match('/"([^"]*)"/', $topline, $regs)) {
$ret = $regs[1];
} else if ((stristr($topline, 'nil') !== false) && (empty($wholemessage))) {
$ret = $wholemessage;
return $ret;
}
-function mime_print_body_lines ($imap_stream, $id, $ent_id=1, $encoding, $rStream='php://stdout') {
+function mime_print_body_lines ($imap_stream, $id, $ent_id=1, $encoding, $rStream='php://stdout', $force_crlf='') {
/* Don't kill the connection if the browser is over a dialup
* and it would take over 30 seconds to download it.
} else {
$body = mime_fetch_body ($imap_stream, $id, $ent_id);
if (is_resource($rStream)) {
- fputs($rStream,decodeBody($body,$encoding));
+ fputs($rStream,decodeBody($body, $encoding, $force_crlf));
} else {
- echo decodeBody($body, $encoding);
+ echo decodeBody($body, $encoding, $force_crlf);
}
}
$body_ary = explode("\n", $body);
for ($i=0; $i < count($body_ary); $i++) {
- $line = $body_ary[$i];
+ $line = rtrim($body_ary[$i],"\r");
+
if (strlen($line) - 2 >= $wrap_at) {
sqWordWrap($line, $wrap_at, $charset);
}
}
/* This executes the attachment hook with a specific MIME-type.
- * If that doesn't have results, it tries if there's a rule
- * for a more generic type. Finally, a hook for ALL attachment
- * types is run as well.
+ * It also allows plugins to run if there's a rule for a more
+ * generic type. Finally, a hook for ALL attachment types is
+ * run as well.
*/
// First remember the default link.
$defaultlink_orig = $defaultlink;
argument, and arguments are passed by reference, so instead of
returning any changes, changes should simply be made to the original
arguments themselves. */
- $temp = array(&$links, &$startMessage, &$id, &$urlMailbox, &$ent,
+ $temp = array(&$links, &$startMessage, &$id, &$urlMailbox, &$ent,
&$defaultlink, &$display_filename, &$where, &$what);
do_hook("attachment $type0/$type1", $temp);
- if(count($links) <= 1 && $defaultlink == $defaultlink_orig) {
- /* The API for this hook has changed as of 1.5.2 so that all plugin
- arguments are passed in an array instead of each their own plugin
- argument, and arguments are passed by reference, so instead of
- returning any changes, changes should simply be made to the original
- arguments themselves. */
- $temp = array(&$links, &$startMessage, &$id, &$urlMailbox, &$ent,
- &$defaultlink, &$display_filename, &$where, &$what);
- do_hook("attachment $type0/*", $temp);
+ /* The API for this hook has changed as of 1.5.2 so that all plugin
+ arguments are passed in an array instead of each their own plugin
+ argument, and arguments are passed by reference, so instead of
+ returning any changes, changes should simply be made to the original
+ arguments themselves. */
+ $temp = array(&$links, &$startMessage, &$id, &$urlMailbox, &$ent,
+ &$defaultlink, &$display_filename, &$where, &$what);
+ // Do not let a generic plugin change the default link if a more
+ // specialized one already did it...
+ if ($defaultlink != $defaultlink_orig) {
+ $dummy = '';
+ $temp[5] = &$dummy;
}
+ do_hook("attachment $type0/*", $temp);
/* The API for this hook has changed as of 1.5.2 so that all plugin
arguments are passed in an array instead of each their own plugin
argument, and arguments are passed by reference, so instead of
}
/**
- * Decodes encoded message body
+ * Decodes encoded string (usually message body)
+ *
+ * This function decodes a string (usually the message body)
+ * depending on the encoding type. Currently quoted-printable
+ * and base64 encodings are supported.
+ *
+ * The decode_body hook was added to this function in 1.4.2/1.5.0.
+ * The $force_crlf parameter was added in 1.5.2.
+ *
+ * @param string $string The encoded string
+ * @param string $encoding used encoding
+ * @param string $force_crlf Whether or not to force CRLF or LF
+ * line endings (or to leave as is).
+ * If given as "LF", line endings will
+ * all be converted to LF; if "CRLF",
+ * line endings will all be converted
+ * to CRLF. If given as an empty value,
+ * the global $force_crlf_default will
+ * be consulted (it can be specified in
+ * config/config_local.php). Otherwise,
+ * any other value will cause the string
+ * to be left alone. Note that this will
+ * be overridden to "LF" if not using at
+ * least PHP version 4.3.0. (OPTIONAL;
+ * default is empty - consult global
+ * default value)
+ *
+ * @return string The decoded string
*
- * This function decodes the body depending on the encoding type.
- * Currently quoted-printable and base64 encodings are supported.
- * decode_body hook was added to this function in 1.4.2/1.5.0
- * @param string $body encoded message body
- * @param string $encoding used encoding
- * @return string decoded string
* @since 1.0
+ *
*/
-function decodeBody($body, $encoding) {
+function decodeBody($string, $encoding, $force_crlf='') {
+
+ global $force_crlf_default;
+ if (empty($force_crlf)) $force_crlf = $force_crlf_default;
+ $force_crlf = strtoupper($force_crlf);
+
+ // must force line endings to LF due to broken
+ // quoted_printable_decode() in PHP versions
+ // before 4.3.0 (see below)
+ //
+ if (!check_php_version(4, 3, 0) || $force_crlf == 'LF')
+ $string = str_replace("\r\n", "\n", $string);
+ else if ($force_crlf == 'CRLF')
+ $string = str_replace("\n", "\r\n", $string);
- $body = str_replace("\r\n", "\n", $body);
$encoding = strtolower($encoding);
$encoding_handler = do_hook('decode_body', $encoding);
- // plugins get first shot at decoding the body
+ // plugins get first shot at decoding the string
//
if (!empty($encoding_handler) && function_exists($encoding_handler)) {
- $body = $encoding_handler('decode', $body);
+ $string = $encoding_handler('decode', $string);
} elseif ($encoding == 'quoted-printable' ||
$encoding == 'quoted_printable') {
- /**
- * quoted_printable_decode() function is broken in older
- * php versions. Text with \r\n decoding was fixed only
- * in php 4.3.0. Minimal code requirement 4.0.4 +
- * str_replace("\r\n", "\n", $body); call.
- */
- $body = quoted_printable_decode($body);
+
+ // quoted_printable_decode() function is broken in older
+ // php versions. Text with \r\n decoding was fixed only
+ // in php 4.3.0. Minimal code requirement is PHP 4.0.4+
+ // and the above call to: str_replace("\r\n", "\n", $string);
+ //
+ $string = quoted_printable_decode($string);
+
} elseif ($encoding == 'base64') {
- $body = base64_decode($body);
+ $string = base64_decode($string);
}
// All other encodings are returned raw.
- return $body;
+ return $string;
}
/**
for($i = 0; $i < $j; ++$i) {
switch($string{$i})
{
+ case '"':
case '=':
case '<':
case '>':
break;
}
} else {
- if (!(isset($aUrl['path']) && $aUrl['path'] == $secremoveimg)) {
+ if (!isset($aUrl['path']) || $aUrl['path'] != $secremoveimg) {
// parse_url did not lead to satisfying result
$attvalue = $sQuote . SM_PATH . 'images/blank.png' . $sQuote;
}
/**
* Fix stupid css declarations which lead to vulnerabilities
* in IE.
+ *
+ * Also remove "position" attribute, as it can easily be set
+ * to "fixed" or "absolute" with "left" and "top" attributes
+ * of zero, taking over the whole content frame. It can also
+ * be set to relative and move itself anywhere it wants to,
+ * displaying content in areas it shouldn't be allowed to touch.
*/
$match = Array('/\/\*.*\*\//',
'/expression/i',
'/binding/i',
'/include-source/i',
'/javascript/i',
- '/script/i');
- $replace = Array('','idiocy', 'idiocy', 'idiocy', 'idiocy', 'idiocy', 'idiocy');
+ '/script/i',
+ '/position/i');
+ $replace = Array('','idiocy', 'idiocy', 'idiocy', 'idiocy', 'idiocy', 'idiocy', '');
$contentNew = preg_replace($match, $replace, $contentTemp);
if ($contentNew !== $contentTemp) {
// insecure css declarations are used. From now on we don't care
}
if (!empty($linkurl)) {
- $httpurl = $quotchar . SM_PATH . 'src/download.php?absolute_dl=true&' .
+ $httpurl = $quotchar . sqm_baseuri() . 'src/download.php?absolute_dl=true&' .
"passed_id=$id&mailbox=" . urlencode($mailbox) .
'&ent_id=' . $linkurl . $quotchar;
} else {
list($free_content, $curpos) =
sq_fixstyle($body, $gt+1, $message, $id, $mailbox);
if ($free_content != FALSE){
+ if ( !empty($attary) ) {
+ $attary = sq_fixatts($tagname,
+ $attary,
+ $rm_attnames,
+ $bad_attvals,
+ $add_attr_to_tag,
+ $message,
+ $id,
+ $mailbox
+ );
+ }
$trusted .= sq_tagprint($tagname, $attary, $tagtype);
$trusted .= $free_content;
$trusted .= sq_tagprint($tagname, false, 2);
"/binding/i",
"/behaviou*r/i",
"/include-source/i",
- "/position\s*:\s*absolute/i",
+
+ // position:relative can also be exploited
+ // to put content outside of email body area
+ // and position:fixed is similarly exploitable
+ // as position:absolute, so we'll remove it
+ // altogether....
+ //
+ // Does this screw up legitimate HTML messages?
+ // If so, the only fix I see is to allow position
+ // attributes (any values? I think we still have
+ // to block static and fixed) only if $use_iframe
+ // is enabled (1.5.0+)
+ //
+ // was: "/position\s*:\s*absolute/i",
+ //
+ "/position\s*:/i",
+
"/(\\\\)?u(\\\\)?r(\\\\)?l(\\\\)?/i",
"/url\s*\(\s*([\'\"])\s*\S+script\s*:.*([\'\"])\s*\)/si",
"/url\s*\(\s*([\'\"])\s*mocha\s*:.*([\'\"])\s*\)/si",
"/url\s*\(\s*([\'\"])\s*about\s*:.*([\'\"])\s*\)/si",
- "/(.*)\s*:\s*url\s*\(\s*([\'\"]*)\s*\S+script\s*:.*([\'\"]*)\s*\)/si"
+ "/(.*)\s*:\s*url\s*\(\s*([\'\"]*)\s*\S+script\s*:.*([\'\"]*)\s*\)/si",
),
Array(
"",
$filename =
call_user_func($languages[$squirrelmail_language]['XTRA_CODE'] . '_downloadfilename', $filename, $HTTP_USER_AGENT);
} else {
- $filename = ereg_replace('[\\/:\*\?"<>\|;]', '_', str_replace(' ', ' ', $filename));
+ $filename = preg_replace('/[\\\\\/:*?"<>|;]/', '_', str_replace(' ', ' ', $filename));
}
// A Pox on Microsoft and it's Internet Explorer!
projects / squirrelmail.git / blobdiff