$sub =~ s/\]\[['"]NAME['"]\]//;
$sub =~ s/.*\[//;
$theme_name[$sub] = $options[1];
+ } elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]ID['"]\]/ ) {
+ $sub = $options[0];
+ $sub =~ s/\]\[['"]ID['"]\]//;
+ $sub =~ s/.*\[//;
+ if ( -e "../templates" ) {
+ $options[1] =~ s/^\.\.\/config/\.\.\/templates/;
+ }
+ $templateset_id[$sub] = $options[1];
+##### FIXME: This section BELOW here so old prefs files don't blow up when running conf.pl
+##### Remove after a month or two
+} elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]PATH['"]\]/ ) {
+ $sub = $options[0];
+ $sub =~ s/\]\[['"]PATH['"]\]//;
+ $sub =~ s/.*\[//;
+ if ( -e "../templates" ) {
+ $options[1] =~ s/^\.\.\/config/\.\.\/templates/;
+ }
+ $templateset_id[$sub] = $options[1];
+##### FIXME: This section ABOVE here so old prefs files don't blow up when running conf.pl
+##### Remove after a month or two
+ } elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]NAME['"]\]/ ) {
+ $sub = $options[0];
+ $sub =~ s/\]\[['"]NAME['"]\]//;
+ $sub =~ s/.*\[//;
+ $templateset_name[$sub] = $options[1];
} elsif ( $options[0] =~ /^plugins\[[0-9]*\]/ ) {
$sub = $options[0];
$sub =~ s/\]//;
$tmp =~ s/[\'\"]?,?\s*$//;
$tmp =~ s/[\'\"]?\);\s*$//;
$listing = $tmp;
+ } elsif ( $tmp =~ /^\s*[\'\"]writeable[\'\"]/i ) {
+ $tmp =~ s/^\s*[\'\"]writeable[\'\"]\s*=>\s*[\'\"]?//i;
+ $tmp =~ s/[\'\"]?,?\s*$//;
+ $tmp =~ s/[\'\"]?\);\s*$//;
+ $writeable = $tmp;
} elsif ( $tmp =~ /^\s*[\'\"]search_tree[\'\"]/i ) {
$tmp =~ s/^\s*[\'\"]search_tree[\'\"]\s*=>\s*[\'\"]?//i;
$tmp =~ s/[\'\"]?,?\s*$//;
$ldap_protocol[$sub] = $protocol;
$ldap_limit_scope[$sub] = $limit_scope;
$ldap_listing[$sub] = $listing;
+ $ldap_writeable[$sub] = $writeable;
$ldap_search_tree[$sub] = $search_tree;
$ldap_starttls[$sub] = $starttls;
- } elsif ( $options[0] =~ /^(data_dir|attachment_dir|theme_css|org_logo|signout_page)$/ ) {
+ } elsif ( $options[0] =~ /^(data_dir|attachment_dir|theme_css|org_logo|signout_page|icon_theme_def)$/ ) {
${ $options[0] } = &change_to_rel_path($options[1]);
} else {
${ $options[0] } = $options[1];
}
close FILE;
+# FIXME: unknown introduction date
$useSendmail = 'false' if ( lc($useSendmail) ne 'true' );
$sendmail_path = "/usr/sbin/sendmail" if ( !$sendmail_path );
$pop_before_smtp = 'false' if ( !$pop_before_smtp );
$optional_delimiter = "detect" if ( !$optional_delimiter );
$auto_create_special = 'false' if ( !$auto_create_special );
$default_use_priority = 'true' if ( !$default_use_priority );
-$hide_sm_attributions = 'false' if ( !$hide_sm_attributions );
$default_use_mdn = 'true' if ( !$default_use_mdn );
$delete_folder = 'false' if ( !$delete_folder );
$noselect_fix_enable = 'false' if ( !$noselect_fix_enable );
$frame_top = "_top" if ( !$frame_top );
$provider_uri = '' if ( !$provider_uri );
$provider_name = '' if ( !$provider_name );
-$edit_identity = 'true' if ( !$edit_identity );
-$edit_name = 'true' if ( !$edit_name );
-$allow_thread_sort = 'false' if ( !$allow_thread_sort );
-$allow_server_sort = 'false' if ( !$allow_server_sort );
$no_list_for_subscribe = 'false' if ( !$no_list_for_subscribe );
$allow_charset_search = 'true' if ( !$allow_charset_search );
$allow_advanced_search = 0 if ( !$allow_advanced_search) ;
$prefs_user_field = 'user' if ( !$prefs_user_field );
$prefs_key_field = 'prefkey' if ( !$prefs_key_field );
$prefs_val_field = 'prefval' if ( !$prefs_val_field );
+$session_name = 'SQMSESSID' if ( !$session_name );
+$skip_SM_header = 'false' if ( !$skip_SM_header );
+$default_use_javascript_addr_book = 'false' if (! $default_use_javascript_addr_book);
+
+# since 1.2.0
+$hide_sm_attributions = 'false' if ( !$hide_sm_attributions );
+# since 1.2.5
+$edit_identity = 'true' if ( !$edit_identity );
+$edit_name = 'true' if ( !$edit_name );
+
+# since 1.4.0
$use_smtp_tls= 'false' if ( !$use_smtp_tls);
$smtp_auth_mech = 'none' if ( !$smtp_auth_mech );
$use_imap_tls = 'false' if ( !$use_imap_tls );
$imap_auth_mech = 'login' if ( !$imap_auth_mech );
-$session_name = 'SQMSESSID' if ( !$session_name );
-$skip_SM_header = 'false' if ( !$skip_SM_header );
-$default_use_javascript_addr_book = 'false' if (! $default_use_javascript_addr_book);
# since 1.5.0
$show_alternative_names = 'false' if ( !$show_alternative_names );
# implementation changes. options are provided by limit_languages plugin
# $available_languages = 'all' if ( !$available_languages );
$aggressive_decoding = 'false' if ( !$aggressive_decoding );
-$advanced_tree = 'false' if ( !$advanced_tree );
+# available only in 1.5.0 and 1.5.1
+# $advanced_tree = 'false' if ( !$advanced_tree );
$use_php_recode = 'false' if ( !$use_php_recode );
$use_php_iconv = 'false' if ( !$use_php_iconv );
$prefs_key_size = 64 if ( !$prefs_key_size );
$prefs_val_size = 65536 if ( !$prefs_val_size );
+# since 1.5.2
+$icon_theme_def = '' if ( !$icon_theme_def );
+
# add qmail-inject test here for backwards compatibility
-if ( !$sendmail_args && $sendmail_path =~ /qmail-inject/ ) {
+if ( !$sendmail_args && $sendmail_path =~ /qmail-inject/ ) {
$sendmail_args = '';
} elsif ( !$sendmail_args ) {
$sendmail_args = '-i -t';
'verasans', 'bitstream vera sans,verdana,sans-serif');
}
+# $use_imap_tls and $use_smtp_tls are switched to integer since 1.5.1
+$use_imap_tls = 0 if ( $use_imap_tls eq 'false');
+$use_imap_tls = 1 if ( $use_imap_tls eq 'true');
+$use_smtp_tls = 0 if ( $use_smtp_tls eq 'false');
+$use_smtp_tls = 1 if ( $use_smtp_tls eq 'true');
+# sorting options changed names and reversed values in 1.5.1
+$disable_thread_sort = 'false' if ( !$disable_thread_sort );
+$disable_server_sort = 'false' if ( !$disable_server_sort );
+
+# since 1.5.2
+$abook_file_line_length = 2048 if ( !$abook_file_line_length );
+$config_location_base = '' if ( !$config_location_base );
+$smtp_sitewide_user = '' if ( !$smtp_sitewide_user );
+$smtp_sitewide_pass = '' if ( !$smtp_sitewide_pass );
if ( $ARGV[0] eq '--install-plugin' ) {
print "Activating plugin " . $ARGV[1] . "\n";
print "2. Server Settings\n";
print "3. Folder Defaults\n";
print "4. General Options\n";
- print "5. Themes\n";
+ print "5. User Interface\n";
print "6. Address Books\n";
print "7. Message of the Day (MOTD)\n";
print "8. Plugins\n";
print "4. IMAP Server : $WHT$imapServerAddress$NRM\n";
print "5. IMAP Port : $WHT$imapPort$NRM\n";
print "6. Authentication type : $WHT$imap_auth_mech$NRM\n";
- print "7. Secure IMAP (TLS) : $WHT$use_imap_tls$NRM\n";
+ print "7. Secure IMAP (TLS) : $WHT" . display_use_tls($use_imap_tls) . "$NRM\n";
print "8. Server software : $WHT$imap_server_type$NRM\n";
print "9. Delimiter : $WHT$optional_delimiter$NRM\n";
print "\n";
print "4. SMTP Server : $WHT$smtpServerAddress$NRM\n";
print "5. SMTP Port : $WHT$smtpPort$NRM\n";
print "6. POP before SMTP : $WHT$pop_before_smtp$NRM\n";
- print "7. SMTP Authentication : $WHT$smtp_auth_mech$NRM\n";
- print "8. Secure SMTP (TLS) : $WHT$use_smtp_tls$NRM\n";
+ print "7. SMTP Authentication : $WHT$smtp_auth_mech" . display_smtp_sitewide_userpass() ."$NRM\n";
+ print "8. Secure SMTP (TLS) : $WHT" . display_use_tls($use_smtp_tls) . "$NRM\n";
print "9. Header encryption key : $WHT$encode_header_key$NRM\n";
print "\n";
}
print "9. Allow editing of identity : $WHT$edit_identity$NRM\n";
print " Allow editing of name : $WHT$edit_name$NRM\n";
print " Remove username from header : $WHT$hide_auth_header$NRM\n";
- print "10. Allow server thread sort : $WHT$allow_thread_sort$NRM\n";
- print "11. Allow server-side sorting : $WHT$allow_server_sort$NRM\n";
+ print "10. Disable server thread sort : $WHT$disable_thread_sort$NRM\n";
+ print "11. Disable server-side sorting : $WHT$disable_server_sort$NRM\n";
print "12. Allow server charset search : $WHT$allow_charset_search$NRM\n";
print "13. Allow advanced search : $WHT$allow_advanced_search$NRM\n";
print "14. PHP session name : $WHT$session_name$NRM\n";
print "15. Time zone configuration : $WHT$time_zone_type$NRM\n";
+ print "16. Location base : $WHT$config_location_base$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 5 ) {
- print $WHT. "Themes\n" . $NRM;
- print "1. Change Themes\n";
- for ( $count = 0 ; $count <= $#theme_name/2 ; $count++ ) {
- $temp_name = $theme_name[$count*2];
- printf " %s%*s %s\n", $temp_name,
- 40 - length($temp_name), " ",
- $theme_name[($count*2)+1];
- }
- print "2. CSS File : $WHT$theme_css$NRM\n";
- print "3. Default font size: $WHT$default_fontsize$NRM\n";
- print "4. Change available font sets\n";
+ print $WHT. "User Interface\n" . $NRM;
+ print "1. Modify Template sets\n";
+ print "2. Use Icons : $WHT$use_icons$NRM\n";
+ print "3. Default Icon Set : $WHT$icon_theme_def$NRM\n";
+ print "4. Default font size : $WHT$default_fontsize$NRM\n";
+ print "5. Modify available font sets\n";
+# print "4. Change Themes\n";
+
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 6 ) {
print "3. Global address book file : $WHT$abook_global_file$NRM\n";
print "4. Allow writing into global file address book : $WHT$abook_global_file_writeable$NRM\n";
print "5. Allow listing of global file address book : $WHT$abook_global_file_listing$NRM\n";
+ print "6. Allowed address book line length : $WHT$abook_file_line_length$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 7 ) {
print "R Return to Main Menu\n";
} elsif ( $menu == 11 ) {
print $WHT. "Interface tweaks\n" . $NRM;
- print "1. Advanced tree : $WHT$advanced_tree$NRM\n";
- print "2. Display html mails in iframe : $WHT$use_iframe$NRM\n";
- print "3. Use Icons : $WHT$use_icons$NRM\n";
+ print "1. Display html mails in iframe : $WHT$use_iframe$NRM\n";
print "\n";
print $WHT. "PHP tweaks\n" . $NRM;
print "4. Use php recode functions : $WHT$use_php_recode$NRM\n";
if ( $command == 4 ) { $imapServerAddress = command12(); }
elsif ( $command == 5 ) { $imapPort = command13(); }
elsif ( $command == 6 ) { $imap_auth_mech = command112a(); }
- elsif ( $command == 7 ) { $use_imap_tls = command113("IMAP",$use_imap_tls); }
+ elsif ( $command == 7 ) { $use_imap_tls = command_use_tls("IMAP",$use_imap_tls); }
elsif ( $command == 8 ) { $imap_server_type = command19(); }
elsif ( $command == 9 ) { $optional_delimiter = command111(); }
} elsif ( $show_smtp_settings && lc($useSendmail) eq 'true' ) {
elsif ( $command == 5 ) { $smtpPort = command17(); }
elsif ( $command == 6 ) { $pop_before_smtp = command18a(); }
elsif ( $command == 7 ) { $smtp_auth_mech = command112b(); }
- elsif ( $command == 8 ) { $use_smtp_tls = command113("SMTP",$use_smtp_tls); }
+ elsif ( $command == 8 ) { $use_smtp_tls = command_use_tls("SMTP",$use_smtp_tls); }
elsif ( $command == 9 ) { $encode_header_key = command114(); }
}
} elsif ( $menu == 3 ) {
elsif ( $command == 7 ) { $hide_sm_attributions = command38(); }
elsif ( $command == 8 ) { $default_use_mdn = command39(); }
elsif ( $command == 9 ) { $edit_identity = command310(); }
- elsif ( $command == 10 ) { $allow_thread_sort = command312(); }
- elsif ( $command == 11 ) { $allow_server_sort = command313(); }
+ elsif ( $command == 10 ) { $disable_thread_sort = command312(); }
+ elsif ( $command == 11 ) { $disable_server_sort = command313(); }
elsif ( $command == 12 ) { $allow_charset_search = command314(); }
elsif ( $command == 13 ) { $allow_advanced_search = command316(); }
elsif ( $command == 14 ) { $session_name = command317(); }
elsif ( $command == 15 ) { $time_zone_type = command318(); }
+ elsif ( $command == 16 ) { $config_location_base = command_config_location_base(); }
} elsif ( $menu == 5 ) {
- if ( $command == 1 ) { command41(); }
- elsif ( $command == 2 ) { $theme_css = command42(); }
- elsif ( $command == 3 ) { $default_fontsize = command_default_fontsize(); }
- elsif ( $command == 4 ) { command_fontsets(); }
+ if ( $command == 1 ) { $templateset_default = command_templates(); }
+ elsif ( $command == 2 ) { $use_icons = commandB3(); }
+ elsif ( $command == 3 ) { $icon_theme_def = commandB7(); }
+ elsif ( $command == 4 ) { $default_fontsize = command_default_fontsize(); }
+ elsif ( $command == 5 ) { command_fontsets(); }
} elsif ( $menu == 6 ) {
if ( $command == 1 ) { command61(); }
elsif ( $command == 2 ) { command62(); }
elsif ( $command == 3 ) { $abook_global_file=command63(); }
elsif ( $command == 4 ) { command64(); }
elsif ( $command == 5 ) { command65(); }
+ elsif ( $command == 6 ) { command_abook_file_line_length(); }
} elsif ( $menu == 7 ) {
if ( $command == 1 ) { $motd = command71(); }
} elsif ( $menu == 8 ) {
elsif ( $command == 4 ) { $aggressive_decoding = commandA4(); }
elsif ( $command == 5 ) { $lossy_encoding = commandA5(); }
} elsif ( $menu == 11 ) {
- if ( $command == 1 ) { $advanced_tree = commandB1(); }
- if ( $command == 2 ) { $use_iframe = commandB2(); }
- elsif ( $command == 3 ) { $use_icons = commandB3(); }
+ if ( $command == 1 ) { $use_iframe = commandB2(); }
elsif ( $command == 4 ) { $use_php_recode = commandB4(); }
elsif ( $command == 5 ) { $use_php_iconv = commandB5(); }
elsif ( $command == 6 ) { $allow_remote_configtest = commandB6(); }
print "If your Organization Title includes a '\$', please precede it with a \\. \n";
print "Other '\$' will be considered the beginning of a variable that\n";
print "must be defined before the \$org_title is printed.\n";
- print "\$version, for example can be used, and will print the\n";
- print "string representing the current SquirrelMail version.\n";
print "\n";
print "[$WHT$org_title$NRM]: $WHT";
$new_org_title = <STDIN>;
sub command8 {
print "Here you can set the name of the link on the right of the page.\n";
- print "The default is 'SquirrelMail/'\n";
+ print "The default is 'SquirrelMail'\n";
print "\n";
print "[$WHT$provider_name$NRM]: $WHT";
$new_provider_name = <STDIN>;
} else {
$new_provider_name =~ s/[\r\n]//g;
$new_provider_name =~ s/^\s+$//g;
+ $new_provider_name =~ s/\'/\\'/g;
}
return $new_provider_name;
}
print "is added automatically by SquirrelMail scripts. Variable defaults to standard\n";
print "/usr/sbin/sendmail arguments. If you use qmail-inject, nbsmtp or any other \n";
print "sendmail wrapper, which does not support -i and -t arguments, set variable to\n";
- print "empty string or use arguments suitable for your mailer.\n";
+ print "empty string or use arguments suitable for your mailer.\n";
print "\n";
print "[$WHT$sendmail_args$NRM]: $WHT";
$new_sendmail_args = <STDIN>;
return $new_smtpPort;
}
-# authenticated server
-sub command18 {
- return;
- # This sub disabled by tassium - it has been replaced with smtp_auth_mech
- print "Do you wish to use an authenticated SMTP server? Your server must\n";
- print "support this in order for SquirrelMail to work with it. We implemented\n";
- print "it according to RFC 2554.\n";
-
- $YesNo = 'n';
- $YesNo = 'y' if ( lc($use_authenticated_smtp) eq 'true' );
-
- print "Use authenticated SMTP server (y/n) [$WHT$YesNo$NRM]: $WHT";
-
- $new_use_authenticated_smtp = <STDIN>;
- $new_use_authenticated_smtp =~ tr/yn//cd;
- return 'true' if ( $new_use_authenticated_smtp eq "y" );
- return 'false' if ( $new_use_authenticated_smtp eq "n" );
- return $use_authenticated_smtp;
-}
-
# pop before SMTP
sub command18a {
print "Do you wish to use POP3 before SMTP? Your server must\n";
# Now offers to detect supported mechs, assuming server & port are set correctly
sub command112a {
- if ($use_imap_tls =~ /^true\b/i) {
- print "Auto-detection of login methods is unavailable when using TLS.\n";
+ if ($use_imap_tls ne "0") {
+ # 1. Script does not handle TLS.
+ # 2. Server does not have to declare all supported authentication mechs when
+ # STARTTLS is used. Supported mechs are declared only after STARTTLS.
+ print "Auto-detection of login methods is unavailable when using TLS or STARTTLS.\n";
} else {
print "If you have already set the hostname and port number, I can try to\n";
print "detect the mechanisms your IMAP server supports.\n";
# SMTP authentication type
# Possible choices: none, plain, cram-md5, digest-md5
sub command112b {
- if ($use_smtp_tls =~ /^true\b/i) {
- print "Auto-detection of login methods is unavailable when using TLS.\n";
- } else {
+ if ($use_smtp_tls ne "0") {
+ print "Auto-detection of login methods is unavailable when using TLS or STARTTLS.\n";
+ } elsif (eval ("use IO::Socket; 1")) {
+ # try loading IO::Socket module
print "If you have already set the hostname and port number, I can try to\n";
print "automatically detect some of the mechanisms your SMTP server supports.\n";
print "Auto-detection is *optional* - you can safely say \"n\" here.\n";
# Special case!
# Check none by trying to relay to junk@microsoft.com
$host = $smtpServerAddress . ':' . $smtpPort;
- use IO::Socket;
my $sock = IO::Socket::INET->new($host);
print "Testing none:\t\t$WHT";
if (!defined($sock)) {
$inval=<STDIN>;
chomp($inval);
if ($inval =~ /^none\b/i) {
- # SMTP doesn't necessarily require logins
- return "none";
+ # remove sitewide smtp authentication information
+ $smtp_sitewide_user = '';
+ $smtp_sitewide_pass = '';
+ # SMTP doesn't necessarily require logins
+ return "none";
+ } elsif ( ($inval =~ /^cram-md5\b/i) || ($inval =~ /^digest-md5\b/i) ||
+ ($inval =~ /^login\b/i) || ($inval =~/^plain\b/i)) {
+ command_smtp_sitewide_userpass($inval);
+ return lc($inval);
+ } elsif (trim($inval) eq '') {
+ # user selected default value
+ command_smtp_sitewide_userpass($smtp_auth_mech);
+ return $smtp_auth_mech;
+ } else {
+ # user entered garbage
+ return $smtp_auth_mech;
+ }
+}
+
+sub command_smtp_sitewide_userpass($) {
+ # get first function argument
+ my $auth_mech = shift(@_);
+ my $default, $tmp;
+ $auth_mech = lc(trim($auth_mech));
+ if ($auth_mech eq 'none') {
+ return;
+ }
+ print "SMTP authentication uses IMAP username and password by default.\n";
+ print "\n";
+ print "Would you like to use other login and password for all SquirrelMail \n";
+ print "SMTP connections?";
+ if ($smtp_sitewide_user ne '') {
+ $default = 'y';
+ print " [Yn]:";
+ } else {
+ $default = 'n';
+ print " [yN]:";
}
- if ( ($inval =~ /^cram-md5\b/i) || ($inval =~ /^digest-md5\b/i) ||
- ($inval =~ /^login\b/i) || ($inval =~/^plain\b/i)) {
- return lc($inval);
+ $tmp=<STDIN>;
+ $tmp = trim($tmp);
+
+ if ($tmp eq '') {
+ $tmp = $default;
} else {
- # user entered garbage, or default value so nothing needs to be set
- return $smtp_auth_mech;
+ $tmp = lc($tmp);
}
+
+ if ($tmp eq 'n') {
+ $smtp_sitewide_user = '';
+ $smtp_sitewide_pass = '';
+ } elsif ($tmp eq 'y') {
+ print "Enter username [$smtp_sitewide_user]:";
+ my $new_user = <STDIN>;
+ $new_user = trim($new_user);
+ if ($new_user ne '') {
+ $smtp_sitewide_user = $new_user;
+ }
+ if ($smtp_sitewide_user ne '') {
+ print "If you don't enter any password, current sitewide password will be used.\n";
+ print "If you enter space, password will be set to empty string.\n";
+ print "Enter password:";
+ my $new_pass = <STDIN>;
+ if ($new_pass ne "\n") {
+ $smtp_sitewide_pass = trim($new_pass);
+ }
+ } else {
+ print "Invalid input. You must set username used for SMTP authentication.\n";
+ print "Click any key to continue\n";
+ $tmp = <STDIN>;
+ }
+ } else {
+ print "Invalid input\n";
+ print "Click any key to continue\n";
+ $tmp = <STDIN>;
+ }
+}
+
+# Sub adds information about SMTP authentication type to menu
+sub display_smtp_sitewide_userpass() {
+ my $ret = '';
+ if ($smtp_auth_mech ne 'none') {
+ if ($smtp_sitewide_user ne '') {
+ $ret = ' (with custom username and password)';
+ } else {
+ $ret = ' (with IMAP username and password)';
+ }
+ }
+ return $ret;
}
# TLS
# This sub is reused for IMAP and SMTP
# Args: service name, default value
-sub command113 {
+sub command_use_tls {
my($default_val,$service,$inval);
$service=$_[0];
$default_val=$_[1];
print "TLS (Transport Layer Security) encrypts the traffic between server and client.\n";
- print "If you're familiar with SSL, you get the idea.\n";
- print "To use this feature, your " . $service . " server must offer TLS\n";
- print "capability, plus PHP 4.3.x with OpenSSL support.\n";
- print "\nIf your " . $service . " server is localhost, you can safely disable this.\n";
+ print "STARTTLS extensions allow to start encryption on existing plain text connection.\n";
+ print "These options add specific PHP and IMAP server configuration requirements.\n";
+ print "See SquirrelMail documentation about connection security.\n";
+ print "\n";
+ print "If your " . $service . " server is localhost, you can safely disable this.\n";
print "If it is remote, you may wish to seriously consider enabling this.\n";
- print "Enable TLS (y/n) [$WHT";
- if ($default_val eq 'true') {
- print "y";
- } else {
- print "n";
+ $valid_input=0;
+ while ($valid_input eq 0) {
+ print "\nSelect connection security model:\n";
+ print " 0 - Use plain text connection\n";
+ print " 1 - Use TLS connection\n";
+ print " 2 - Use STARTTLS extension\n";
+ print "Select [$default_val]: ";
+ $inval=<STDIN>;
+ $inval=trim($inval);
+ if ($inval =~ /^[012]$/ || $inval eq '') {
+ $valid_input = 1;
+ }
}
- print "$NRM]: $WHT";
- $inval=<STDIN>;
- $inval =~ tr/yn//cd;
- return 'true' if ( $inval eq "y" );
- return 'false' if ( $inval eq "n" );
+ if ($inval ne '') {$default_val = $inval};
return $default_val;
}
+# This sub is used to display human readable text for
+# $use_imap_tls and $use_smtp_tls values in conf.pl menu
+sub display_use_tls($) {
+ my $val = shift(@_);
+ my $ret = 'disabled';
+ if ($val eq '2') {
+ $ret = 'STARTTLS';
+ } elsif ($val eq '1') {
+ $ret = 'TLS';
+ }
+ return $ret;
+}
+
# $encode_header_key
sub command114{
print "Encryption key allows to hide SquirrelMail Received: headers\n";
if ( $new_trash_folder eq "\n" ) {
$new_trash_folder = $trash_folder;
} else {
- $new_trash_folder =~ s/[\r\n]//g;
+ if (check_imap_folder($new_trash_folder)) {
+ $new_trash_folder =~ s/[\r\n]//g;
+ } else {
+ $new_trash_folder = $trash_folder;
+ }
}
return $new_trash_folder;
}
if ( $new_sent_folder eq "\n" ) {
$new_sent_folder = $sent_folder;
} else {
- $new_sent_folder =~ s/[\r\n]//g;
+ if (check_imap_folder($new_sent_folder)) {
+ $new_sent_folder =~ s/[\r\n]//g;
+ } else {
+ $new_sent_folder = $sent_folder;
+ }
}
return $new_sent_folder;
}
if ( $new_draft_folder eq "\n" ) {
$new_draft_folder = $draft_folder;
} else {
- $new_draft_folder =~ s/[\r\n]//g;
+ if (check_imap_folder($new_draft_folder)) {
+ $new_draft_folder =~ s/[\r\n]//g;
+ } else {
+ $new_draft_folder = $draft_folder;
+ }
}
return $new_draft_folder;
}
sub command310 {
- print " In loosely managed environments, you may want to allow users
- to edit their full name and email address. In strictly managed
+ print " In loosely managed environments, you may want to allow users
+ to edit their full name and email address. In strictly managed
environments, you may want to force users to use the name
and email address assigned to them.
-
+
'y' - allow a user to edit their full name and email address,
'n' - users must use the assigned values.
-
+
";
if ( lc($edit_identity) eq 'true' ) {
}
sub command311 {
- print " Given that users are not allowed to modify their
+ print " Given that users are not allowed to modify their
email address, can they edit their full name?
-
+
";
if ( lc($edit_name) eq 'true' ) {
sub command311b {
print " SquirrelMail adds username information to every sent email
- in order to prevent possible sender forging when users are allowed
+ in order to prevent possible sender forging when users are allowed
to change their email and/or full name.
- You can remove user information from this header (y), if you think that
- it violates privacy or security.
-
- Note: If users are allowed to change their email addresses,
+ You can remove user information from this header (y), if you think that
+ it violates privacy or security.
+
+ Note: If users are allowed to change their email addresses,
this setting will make it difficult to determine who sent what where.
Use at your own risk.
-
+
";
-
+
if ( lc($hide_auth_header) eq "true" ) {
$default_value = "y";
} else {
}
sub command312 {
- print "This option allows you to choose if users can use thread sorting\n";
- print "Your IMAP server must support the THREAD command for this to work\n";
- print "PHP versions later than 4.0.3 recommended\n";
+ print "This option allows you to disable server side thread sorting if your server \n";
+ print "declares THREAD support, but you don't want to provide threading options \n";
+ print "to end users or THREAD extension is broken or extension does not work with \n";
+ print "options used by SquirrelMail. Option is not used, if THREAD extension is \n";
+ print "not declared in IMAP CAPABILITY.\n";
print "\n";
- if ( lc($allow_thread_sort) eq 'true' ) {
+ if ( lc($disable_thread_sort) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
}
- print "Allow server side thread sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
- $allow_thread_sort = <STDIN>;
- if ( ( $allow_thread_sort =~ /^y\n/i ) || ( ( $allow_thread_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
- $allow_thread_sort = 'true';
+ print "Disable server side thread sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $disable_thread_sort = <STDIN>;
+ if ( ( $disable_thread_sort =~ /^y\n/i ) || ( ( $disable_thread_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $disable_thread_sort = 'true';
} else {
- $allow_thread_sort = 'false';
+ $disable_thread_sort = 'false';
}
- return $allow_thread_sort;
+ return $disable_thread_sort;
}
sub command313 {
- print "This option allows you to choose if SM uses server-side sorting\n";
- print "Your IMAP server must support the SORT command for this to work\n";
+ print "This option allows you to disable server side sorting if your server declares \n";
+ print "SORT support, but SORT extension is broken or does not work with options \n";
+ print "used by SquirrelMail. Option is not used, if SORT extension is not declared \n";
+ print "in IMAP CAPABILITY.\n";
+ print "\n";
+ print "It is strongly recommended to keep server side sorting enabled, if your ";
+ print "IMAP server supports it.";
print "\n";
- if ( lc($allow_server_sort) eq 'true' ) {
+ if ( lc($disable_server_sort) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
}
- print "Allow server-side sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
- $allow_server_sort = <STDIN>;
- if ( ( $allow_server_sort =~ /^y\n/i ) || ( ( $allow_server_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
- $allow_server_sort = 'true';
+ print "Disable server-side sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
+ $disable_server_sort = <STDIN>;
+ if ( ( $disable_server_sort =~ /^y\n/i ) || ( ( $disable_server_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
+ $disable_server_sort = 'true';
} else {
- $allow_server_sort = 'false';
+ $disable_server_sort = 'false';
}
- return $allow_server_sort;
+ return $disable_server_sort;
}
sub command314 {
return $time_zone_type;
}
+# set the location base for redirects (since 1.5.2)
+sub command_config_location_base {
+ print "Here you can set the base part of the SquirrelMail URL.\n";
+ print "It is normally autodetected but if that fails, use this\n";
+ print "option to override.\n";
+ print "It should contain only the protocol and hostname/port parts\n";
+ print "of the URL; the full path will be appended automatically.\n\n";
+ print "Examples:\nhttp://webmail.example.org\nhttp://webmail.example.com:8080\nhttps://webmail.example.com:6691\n\n";
+ print "Do not add any path elements.\n";
+
+ print "URL base? [" .$WHT."autodetect$NRM]: $WHT";
+ $new_config_location_base = <STDIN>;
+ chomp($new_config_location_base);
+ $config_location_base = $new_config_location_base;
+
+ return $config_location_base;
+}
+
+
sub command41 {
print "\nDefine the themes that you wish to use. If you have added ";
}
}
-# Theme - CSS file
-sub command42 {
- print "You may specify a cascading style-sheet (CSS) file to be included\n";
- print "on each html page generated by SquirrelMail. The CSS file is useful\n";
- print "for specifying a site-wide font. If you're not familiar with CSS\n";
- print "files, leave this blank.\n";
- print "\n";
- print "To clear out an existing value, just type a space for the input.\n";
- print "\n";
- print "Please be aware of the following: \n";
- print " - Relative URLs are relative to the config dir\n";
- print " to use the themes directory, use ../themes/css/newdefault.css\n";
- print " - To specify a css file defined outside the SquirrelMail source tree\n";
- print " use the absolute URL the webserver would use to include the file\n";
- print " e.g. http://some.host.com/css/mystyle.css or /css/mystyle.css\n";
+sub command_templates {
+ print "\nDefine the template sets that you wish to use. If you have added ";
+ print "a template set of your own, just follow the instructions (?) about how to add ";
+ print "them. You can also change the default template.\n";
+
+ print "\n Available Templates:\n";
+
+ $count = 0;
+ while ( $count <= $#templateset_name ) {
+ if ( $count == $templateset_default ) {
+ print " *";
+ } else {
+ print " ";
+ }
+ if ( $count < 10 ) {
+ print " ";
+ }
+ $name = $templateset_name[$count];
+ $num_spaces = 35 - length($name);
+ for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
+ $name = $name . " ";
+ }
+
+ print " $count. $name";
+ print "($templateset_id[$count])\n";
+
+ $count++;
+ }
+
+# FIXME: what is this stuff? it is commented out, can we just blast it?
+# opendir( DIR, "../templates" );
+# @files = readdir(DIR);
+# $pos = 0;
+#
+# while ( $cnt <= $#files ) {
+# if ( -d "../templates/" . $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne "CVS" ) {
+# $filename = "../templates/" . $files[$cnt];
+# $found = 0;
+# for ( $x = 0 ; $x <= $#templateset_id ; $x++ ) {
+# if ( $theme_path[$x] eq $filename ) {
+# $found = 1;
+# }
+# }
+# }
+# $cnt++;
+# }
+# for ( $i = 0 ; $i <= $#files ; $i++ ) {
+# if ( -d "../templates/" . $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne "CVS" ) {
+# $match = 0;
+# for ( $k = 0 ; $k <= $#aTemplateSets ; $k++ ) {
+# if ( $aTemplateSets[$chosen] eq $files[$i] ) {
+# $match = 1;
+# }
+# }
+# if ( $match == 0 ) {
+# $unused_plugins[$pos] = $files[$i];
+# $pos++;
+# }
+# }
+# }
+#
+# for ( $i = 0 ; $i <= $#unused_plugins ; $i++ ) {
+# $num = $num + 1;
+# print " $num. $unused_plugins[$i]\n";
+# }
+# closedir DIR;
+
+ $menu_text = ".-------------------------------------.\n"
+ . "| t (detect templates set) |\n"
+ . "| + (add template set) |\n"
+ . "| - N (remove template set) |\n"
+ . "| m N (mark default template set) |\n"
+ . "| l (list template sets) |\n"
+ . "| d (done) |\n"
+ . "|-------------------------------------|\n"
+ . "| where N is a template set number |\n"
+ . "`-------------------------------------'\n";
print "\n";
- print "[$WHT$theme_css$NRM]: $WHT";
- $new_theme_css = <STDIN>;
+ print $menu_text;
+ print "\n[template set] command (?=help) > ";
- if ( $new_theme_css eq "\n" ) {
- $new_theme_css = $theme_css;
- } else {
- $new_theme_css =~ s/[\r\n]//g;
+ $input = <STDIN>;
+ $input =~ s/[\r\n]//g;
+ while ( $input ne "d" ) {
+
+ # list template sets
+ #
+ if ( $input =~ /^\s*l\s*/i ) {
+ $count = 0;
+ while ( $count <= $#templateset_name ) {
+ if ( $count == $templateset_default ) {
+ print " *";
+ } else {
+ print " ";
+ }
+ if ( $count < 10 ) {
+ print " ";
+ }
+ $name = $templateset_name[$count];
+ $num_spaces = 35 - length($name);
+ for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
+ $name = $name . " ";
+ }
+
+ print " $count. $name";
+ print "($templateset_id[$count])\n";
+
+ $count++;
+ }
+
+ # mark default template set
+ #
+ } elsif ( $input =~ /^\s*m\s*[0-9]+/i ) {
+ $old_def = $templateset_default;
+ $templateset_default = $input;
+ $templateset_default =~ s/^\s*m\s*//;
+ if ( ( $templateset_default > $#templateset_name ) || ( $templateset_default < 0 ) ) {
+ print "Cannot set default template set to $templateset_default. That template set does not exist.\n";
+ $templateset_default = $old_def;
+ }
+
+ # add template set
+ #
+ } elsif ( $input =~ /^\s*\+/ ) {
+ print "\nWhat is the name of this template (as shown to your users): ";
+ $name = <STDIN>;
+ $name =~ s/[\r\n]//g;
+ $templateset_name[ $#templateset_name + 1 ] = $name;
+ print "\n\nThe directory name should not contain any path information\n"
+ . "or slashes, and should be the name of the directory that the\n"
+ . "template set is found in within the SquirrelMail templates\n"
+ . "directory.\n\n";
+ print "What directory is this stored in (ex: default_advanced): ";
+ $name = <STDIN>;
+ $name =~ s/[\r\n]//g;
+ $templateset_id[ $#templateset_id + 1 ] = $name;
+
+ # detect template sets
+ #
+ } elsif ( $input =~ /^\s*t\s*/i ) {
+ print "\nStarting detection...\n\n";
+ opendir( DIR, "../templates" );
+ @files = readdir(DIR);
+ $cnt = 0;
+ while ( $cnt <= $#files ) {
+ if ( -d "../templates/" . $files[$cnt] && $files[$cnt] !~ /^\./ && $files[$cnt] ne "CVS" ) {
+ $filename = $files[$cnt];
+ $found = 0;
+ for ( $x = 0 ; $x <= $#templateset_id ; $x++ ) {
+ if ( $templateset_id[$x] eq $filename ) {
+ $found = 1;
+ last;
+ }
+ }
+ if ( $found != 1) {
+ print "** Found template set: $filename\n";
+ print " What is it's name (as shown to your users)? ";
+ $nm = <STDIN>;
+ $nm =~ s/[\n\r]//g;
+ $templateset_id[ $#templateset_id + 1 ] = $filename;
+ $templateset_name[ $#templateset_name + 1 ] = $nm;
+# FIXME: why are these two lines here?
+# $aTemplateSet[ $#templateset_name + 1 ] = $nm;
+# $aTemplateSet[ $#templateset_id + 1 ] = $filename;
+ }
+ }
+ $cnt++;
+ }
+ print "\n";
+ for ( $cnt= 0 ; $cnt <= $#templateset_id ; ) {
+ $filename = $templateset_id[$cnt];
+ if ( !(-d change_to_rel_path('SM_PATH . \'templates/' . $filename)) ) {
+ print " Removing \"$filename\" (template set directory not found)\n";
+ if ( $templateset_default gt $cnt ) { $templateset_default--; }
+ elsif ( $templateset_default eq $cnt ) { $templateset_default = 0; }
+ $offset = 0;
+ @new_templateset_name = ();
+ @new_templateset_id = ();
+ for ( $x = 0 ; $x < $#templateset_id ; $x++ ) {
+ if ( $templateset_id[$x] eq $filename ) {
+ $offset = 1;
+ }
+ if ( $offset == 1 ) {
+ $new_templateset_name[$x] = $templateset_name[ $x + 1 ];
+ $new_templateset_id[$x] = $templateset_id[ $x + 1 ];
+ } else {
+ $new_templateset_name[$x] = $templateset_name[$x];
+ $new_templateset_id[$x] = $templateset_id[$x];
+ }
+ }
+ @templateset_name = @new_templateset_name;
+ @templateset_id = @new_templateset_id;
+ } else { $cnt++; }
+ }
+ print "\nDetection complete!\n\n";
+
+ closedir DIR;
+
+ # remove template set
+ #
+ # undocumented functionality of removing last template set isn't that great
+ #} elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
+ } elsif ( $input =~ /^\s*-\s*[0-9]+/ ) {
+ if ( $input =~ /[0-9]+\s*$/ ) {
+ $rem_num = $input;
+ $rem_num =~ s/^\s*-\s*//g;
+ $rem_num =~ s/\s*$//;
+ } else {
+ $rem_num = $#templateset_name;
+ }
+ if ( $rem_num == $templateset_default ) {
+ print "You cannot remove the default template set!\n";
+ } else {
+ $count = 0;
+ @new_templateset_name = ();
+ @new_templateset_id = ();
+ while ( $count <= $#templateset_name ) {
+ if ( $count != $rem_num ) {
+ @new_templateset_name = ( @new_templateset_name, $templateset_name[$count] );
+ @new_templateset_id = ( @new_templateset_id, $templateset_id[$count] );
+ }
+ $count++;
+ }
+ @templateset_name = @new_templateset_name;
+ @templateset_id = @new_templateset_id;
+ if ( $templateset_default > $rem_num ) {
+ $templateset_default--;
+ }
+ }
+
+ # help
+ #
+ } elsif ( $input =~ /^\s*\?\s*/ ) {
+ print $menu_text;
+ }
+ print "[template set] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r\n]//g;
}
- $new_theme_css =~ s/^\s*//;
- return $new_theme_css;
+ return $templateset_default;
}
+
# sets default font size option
sub command_default_fontsize {
print "Enter default font size [$WHT$$default_fontsize$NRM]: $WHT";
sub command61 {
print "You can now define different LDAP servers.\n";
+ print "Please ensure proper permissions for config.php when including\n";
+ print "sensitive passwords.\n\n";
print "[ldap] command (?=help) > ";
$input = <STDIN>;
$input =~ s/[\r\n]//g;
if ( $ldap_listing[$count] ) {
print " listing: $ldap_listing[$count]\n";
}
+ if ( $ldap_writeable[$count] ) {
+ print " writeable: $ldap_writeable[$count]\n";
+ }
if ( $ldap_search_tree[$count] ) {
print " search_tree: $ldap_search_tree[$count]\n";
}
$sub = $#ldap_host + 1;
print "First, we need to have the hostname or the IP address where\n";
- print "this LDAP server resides. Example: ldap.bigfoot.com\n";
+ print "this LDAP server resides. Example: ldap.bigfoot.com\n";
+ print "\n";
+ print "You can use any URI compatible with your LDAP library. Please\n";
+ print "note that StartTLS option is not compatible with ldaps and\n";
+ print "ldapi URIs.\n";
print "hostname: ";
$name = <STDIN>;
$name =~ s/[\r\n]//g;
print "Number of displayed entries is limited by maxrows setting.\n";
print "\n";
print "Don't enable this option for public LDAP directories.\n";
- print "This feature is experimental.\n";
print "\n";
print "Allow listing of LDAP directory? (y/N):";
$name = <STDIN>;
print "\n";
+ print "You can control write access to LDAP address book here. This option can\n";
+ print "be useful if you run small LDAP server and want to provide writable\n";
+ print "shared address book stored in LDAP to users of webmail interface.\n";
+ print "\n";
+ print "Don't enable this option for public LDAP directories.\n";
+ print "\n";
+ print "Allow writing to LDAP directory? (y/N):";
+ $name = <STDIN>;
+ if ( $name =~ /^y\n/i ) {
+ $name = 'true';
+ } else {
+ $name = 'false';
+ }
+ $ldap_writeable[$sub] = $name;
+
+ print "\n";
+
print "You can specify an additional search filter.\n";
print "This could be something like \"(objectclass=posixAccount)\".\n";
print "No filtering is performed by default. Press ENTER for default.\n";
@new_ldap_protocol = ();
@new_ldap_limit_scope = ();
@new_ldap_listing = ();
+ @new_ldap_writeable = ();
@new_ldap_search_tree = ();
@new_ldap_starttls = ();
@new_ldap_protocol = ( @new_ldap_protocol, $ldap_protocol[$count] );
@new_ldap_limit_scope = ( @new_ldap_limit_scope, $ldap_limit_scope[$count] );
@new_ldap_listing = ( @new_ldap_listing, $ldap_listing[$count] );
+ @new_ldap_writeable = ( @new_ldap_writeable, $ldap_writeable[$count] );
@new_ldap_search_tree = ( @new_ldap_search_tree, $ldap_search_tree[$count] );
@new_ldap_starttls = ( @new_ldap_starttls, $ldap_starttls[$count] );
}
@ldap_protocol = @new_ldap_protocol;
@ldap_limit_scope = @new_ldap_limit_scope;
@ldap_listing = @new_ldap_listing;
+ @ldap_writeable = @new_ldap_writeable;
@ldap_search_tree = @new_ldap_search_tree;
@ldap_starttls = @new_ldap_starttls;
return $abook_global_file_listing;
}
+# controls $abook_file_line_length setting
+sub command_abook_file_line_length {
+ print "This setting controls space allocated to file based address book records.\n";
+ print "End users will be unable to save address book entry, if total entry size \n";
+ print "(quoted address book fields + 4 delimiters + linefeed) exceeds allowed \n";
+ print "address book length size.\n";
+ print "\n";
+ print "Same setting is applied to personal and global file based address books.\n";
+ print "\n";
+ print "It is strongly recommended to keep default setting value. Change it only\n";
+ print "if you really want to store address book entries that are bigger than two\n";
+ print "kilobytes (2048).\n";
+ print "\n";
+
+ print "Enter allowed address book line length [$abook_file_line_length]: ";
+ my $tmp = <STDIN>;
+ $tmp = trim($tmp);
+ # value is not modified, if user hits Enter or enters space
+ if ($tmp ne '') {
+ # make sure that input is numeric
+ if ($tmp =~ /^\d+$/) {
+ $abook_file_line_length = $tmp;
+ } else {
+ print "If you want to change this setting, you must enter number.\n";
+ print "If you want to keep original setting - enter space.\n\n";
+ print "Press Enter to continue...";
+ $tmp = <STDIN>;
+ }
+ }
+}
+
sub command91 {
print "If you want to store your users address book details in a database then\n";
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
- print "of these are mysql, msql and pgsql\n";
+ print "of these are mysql, msql and pgsql.\n";
+ print "Please ensure proper permissions for config.php when including\n";
+ print "sensitive passwords.\n\n";
print "If the DSN is left empty (hit space and then return) the database\n";
- print "related code for address books will not be used\n";
+ print "related code for address books will not be used.\n";
print "\n";
if ( $addrbook_dsn eq "" ) {
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
- print "of these are mysql, msql and pgsql\n";
+ print "of these are mysql, msql and pgsql.\n";
+ print "Please ensure proper permissions for config.php when including\n";
+ print "sensitive passwords.\n\n";
print "If the DSN is left empty (hit space and then return) the database\n";
- print "related code for address books will not be used\n";
+ print "related code for address books will not be used.\n";
print "\n";
if ( $prefs_dsn eq "" ) {
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
- print "of these are mysql, msql and pgsql\n";
+ print "of these are mysql, msql and pgsql.\n";
+ print "Please ensure proper permissions for config.php when including\n";
+ print "sensitive passwords.\n\n";
print "If the DSN is left empty (hit space and then return) the database\n";
- print "related code for global SQL address book will not be used\n";
+ print "related code for global SQL address book will not be used.\n";
print "\n";
if ( $addrbook_global_dsn eq "" ) {
print "This option controls what character set is used when sending\n";
print "mail and when sending HTML to the browser. Option works only\n";
print "with US English (en_US) translation. Other translations use\n";
- print "charsets that are set in functions/i18n.php.\n";
+ print "charsets that are set in translation settings.\n";
print "\n";
print "[$WHT$default_charset$NRM]: $WHT";
return $lossy_encoding;
}
-
-# Advanced tree
-sub commandB1 {
- print "Enable this option if you want to use DHTML based folder listing.\n";
- print "Code is experimental, works only with some browsers and there might\n";
- print "be some glitches.\n";
- print "\n";
-
- if ( lc($advanced_tree) eq 'true' ) {
- $default_value = "y";
- } else {
- $default_value = "n";
- }
- print "Use advanced tree in folder listing? (y/n) [$WHT$default_value$NRM]: $WHT";
- $advanced_tree = <STDIN>;
- if ( ( $advanced_tree =~ /^y\n/i ) || ( ( $advanced_tree =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
- $advanced_tree = 'true';
- } else {
- $advanced_tree = 'false';
- }
- return $advanced_tree;
-}
# display html emails in iframe
sub commandB2 {
print "This option can enable html email rendering inside iframe.\n";
return $allow_remote_configtest;
}
+# Default Icon theme
+sub commandB7 {
+ print "You may change the path to the default icon theme to be used, if icons\n";
+ print "have been enabled. This theme will be used when an icon cannot be\n";
+ print "found in the current theme, or when no icon theme is specified. If\n";
+ print "left blank, and icons are enabled, the default theme will be used\n";
+ print "from images/themes/default/.\n";
+ print "\n";
+ print "To clear out an existing value, just type a space for the input.\n";
+ print "\n";
+ print "Please be aware of the following: \n";
+ print " - Relative URLs are relative to the config dir\n";
+ print " to use the icon themes directory, use ../images/themes/newtheme/\n";
+ print " - The icon theme may be outside the SquirrelMail directory, but\n";
+ print " it must be web accessible.\n";
+ print "[$WHT$icon_theme_def$NRM]: $WHT";
+ $new_icon_theme_def = <STDIN>;
+ if ( $new_icon_theme_def eq "\n" ) {
+ $new_icon_theme_def = $icon_theme_def;
+ } else {
+ $new_icon_theme_def =~ s/[\r\n]//g;
+ }
+ $new_icon_theme_def =~ s/^\s*//;
+ return $new_icon_theme_def;
+}
sub save_data {
$tab = " ";
# boolean
print CF "\$hide_auth_header = $hide_auth_header;\n";
# boolean
- print CF "\$allow_thread_sort = $allow_thread_sort;\n";
+ print CF "\$disable_thread_sort = $disable_thread_sort;\n";
# boolean
- print CF "\$allow_server_sort = $allow_server_sort;\n";
+ print CF "\$disable_server_sort = $disable_server_sort;\n";
# boolean
print CF "\$allow_charset_search = $allow_charset_search;\n";
# integer
# integer
print CF "\$time_zone_type = $time_zone_type;\n";
print CF "\n";
+ # string
+ print CF "\$config_location_base = '$config_location_base';\n";
+ print CF "\n";
# all plugins are strings
for ( $ct = 0 ; $ct <= $#plugins ; $ct++ ) {
}
print CF "\n";
+ if ( $templateset_default eq '' ) { $templateset_default = '0'; }
+ print CF "\$templateset_default = $templateset_default;\n";
+# FIXME: need to make this a setting the user can change herein
+# This REALLY needs to be done, since the index of the "default"
+# set cannot always be predicted!
+# Heck, why are default and fallback indexes? If we make them
+# into the ID strings, then it would not cause such issues
+$templateset_fallback = 0;
+ print CF "\$templateset_fallback = $templateset_fallback;\n";
+
+ for ( $count = 0 ; $count <= $#templateset_name ; $count++ ) {
+ print CF "\$aTemplateSet[$count]['ID'] = '" . $templateset_id[$count] . "';\n";
+ # escape theme name so it can contain single quotes.
+ $esc_name = $templateset_name[$count];
+ $esc_name =~ s/\\/\\\\/g;
+ $esc_name =~ s/'/\\'/g;
+ print CF "\$aTemplateSet[$count]['NAME'] = '$esc_name';\n";
+ }
+ print CF "\n";
+
+
# integer
print CF "\$default_fontsize = '$default_fontsize';\n";
# string
# boolean
print CF " 'listing' => $ldap_listing[$count]";
}
+ if ( $ldap_writeable[$count] ) {
+ print CF ",\n";
+ # boolean
+ print CF " 'writeable' => $ldap_writeable[$count]";
+ }
if ( $ldap_search_tree[$count] ) {
print CF ",\n";
# integer
print CF "\$abook_global_file_writeable = $abook_global_file_writeable;\n\n";
# boolean
print CF "\$abook_global_file_listing = $abook_global_file_listing;\n\n";
+ # integer
+ print CF "\$abook_file_line_length = $abook_file_line_length;\n\n";
# boolean
print CF "\$no_list_for_subscribe = $no_list_for_subscribe;\n";
# string
print CF "\$smtp_auth_mech = '$smtp_auth_mech';\n";
+ print CF "\$smtp_sitewide_user = '". quote_single($smtp_sitewide_user) ."';\n";
+ print CF "\$smtp_sitewide_pass = '". quote_single($smtp_sitewide_pass) ."';\n";
# string
print CF "\$imap_auth_mech = '$imap_auth_mech';\n";
# boolean
print CF "\n";
- # boolean
- print CF "\$advanced_tree = $advanced_tree;\n";
- print CF "\n";
# boolean
print CF "\$use_iframe = $use_iframe;\n";
print CF "\n";
# boolean
print CF "\$use_icons = $use_icons;\n";
print CF "\n";
+ # string
+ print CF "\$icon_theme_def = " . &change_to_SM_path($icon_theme_def) . ";\n";
# boolean
print CF "\$use_php_recode = $use_php_recode;\n";
print CF "\n";
# boolean
print CF "\$allow_remote_configtest = $allow_remote_configtest;\n";
print CF "\n";
-
- print CF "\@include SM_PATH . 'config/config_local.php';\n";
-
- print CF "\n/**\n";
- print CF " * Make sure there are no characters after the PHP closing\n";
- print CF " * tag below (including newline characters and whitespace).\n";
- print CF " * Otherwise, that character will cause the headers to be\n";
- print CF " * sent and regular output to begin, which will majorly screw\n";
- print CF " * things up when we try to send more headers later.\n";
- print CF " */\n";
- print CF "?>";
close CF;
$disp_default_folder_prefix = "<none>";
$force_username_lowercase = false;
+ # Delimiter might differ if unixhierarchysep is set to yes.
+ $message = "\nIf you have enabled unixhierarchysep, you must change delimiter and special folder names.\n";
+
$continue = 1;
} elsif ( $server eq "uw" ) {
$imap_server_type = "uw";
my $new_path = $old_path;
if ( $old_path =~ /^SM_PATH/ ) {
+ # FIXME: the following replacement loses the opening quote mark!
$new_path =~ s/^SM_PATH . \'/\.\.\//;
$new_path =~ s/\.\.\/config\///;
}
return $new_path;
}
-sub detect_auth_support {
# Attempts to auto-detect if a specific auth mechanism is supported.
# Called by 'command112a' and 'command112b'
# ARGS: service-name (IMAP or SMTP), host:port, mech-name (ie. CRAM-MD5)
-
+sub detect_auth_support {
+ # Try loading IO::Socket
+ unless (eval("use IO::Socket; 1")) {
+ print "Perl IO::Socket module is not available.";
+ return undef;
+ }
# Misc setup
- use IO::Socket;
my $service = shift;
my $host = shift;
my $mech = shift;
system "clear";
}
}
+
+# checks IMAP mailbox name. Refuses to accept 8bit folders
+# returns 0 (folder name is not correct) or 1 (folder name is correct)
+sub check_imap_folder($) {
+ my $folder_name = shift(@_);
+
+ if ($folder_name =~ /[\x80-\xFFFF]/) {
+ print "Folder name contains 8bit characters. Configuration utility requires\n";
+ print "UTF7-IMAP encoded folder names.\n";
+ print "Press any key to continue...";
+ my $tmp = <STDIN>;
+ return 0;
+ } elsif ($folder_name =~ /[&\*\%]/) {
+ # check for ampersand and list-wildcards
+ print "Folder name contains special UTF7-IMAP characters.\n";
+ print "Are you sure that folder name is correct? (yN): ";
+ my $tmp = <STDIN>;
+ $tmp = lc(trim($tmp));
+ if ($tmp =~ /^y$/) {
+ return 1;
+ } else {
+ return 0;
+ }
+ } else {
+ return 1;
+ }
+}
+
+# quotes string written in single quotes
+sub quote_single($) {
+ my $string = shift(@_);
+ $string =~ s/\'/\\'/g;
+ return $string;
+}
projects / squirrelmail.git / blobdiff