#!/usr/bin/perl
# conf.pl
-# Written March 26, 2000
-# Luke Ehresman (lehresma@css.tayloru.edu)
+# Luke Ehresman (luke@squirrelmail.org)
#
# A simple configure script to configure squirrelmail
-############################################################
-$WHT = "\x1B[37;1m";
-$NRM = "\x1B[0m";
-
-system "clear";
-print "\n\n--------------------------------------------------------\n";
-print "SquirrelMail version 0.4 -- Configure script\n";
-print "by SquirrelMail Development Team\n";
-print "http://squirrelmail.sourceforge.net\n";
-print "--------------------------------------------------------\n";
-print "\n";
-
-############################################################
+############################################################
+$conf_pl_version = "x52";
+
+############################################################
# First, lets read in the data already in there...
-############################################################
+############################################################
if ( -e "config.php") {
- print "The file \"config.php\" exists. Using it for defaults.\n\n";
- open (FILE, "config.php");
+ open (FILE, "config.php");
+ while ($line = <FILE>) {
+ if ($line =~ /^\s+\$/) {
+ $line =~ s/^\s+\$//;
+ $var = $line;
+
+ $var =~ s/=/EQUALS/;
+ if ($var =~ /^([a-z]|[A-Z])/) {
+ @o = split(/\s*EQUALS\s*/, $var);
+ if ($o[0] eq "config_version") {
+ $o[1] =~ s/[\n|\r]//g;
+ $o[1] =~ s/\";\s*$//;
+ $o[1] =~ s/;$//;
+ $o[1] =~ s/^"//;
+
+ $config_version = $o[1];
+ close (FILE);
+ }
+ }
+ }
+ }
+ close (FILE);
+
+ if ($config_version ne $conf_pl_version) {
+ system "clear";
+ print $WHT."WARNING:\n".$NRM;
+ print " The file \"config/config.php\" was found, but it is for an older version of\n";
+ print " SquirrelMail. It is possible to still read the defaults from this file\n";
+ print " but be warned that many preferences change between versions. It is\n";
+ print " recommended that you start with a clean config.php for each upgrade that\n";
+ print " you do. To do this, just move config/config.php out of the way.\n\n";
+ print "Continue loading with the old config.php [y/n]? ";
+ $ctu = <STDIN>;
+ if (($ctu =~ /^n\n/i) || ($ctu =~ /^\n/)) {
+ exit;
+ }
+
+ print "\nDo you want me to stop warning you [y/n]? ";
+ $ctu = <STDIN>;
+ if ($ctu =~ /^y\n/i) {
+ $print_config_version = $conf_pl_version;
+ } else {
+ $print_config_version = $config_version;
+ }
+ } else {
+ $print_config_version = $config_version;
+ }
+
+ $config = 1;
+ open (FILE, "config.php");
+} elsif (-e "config_default.php") {
+ open (FILE, "config_default.php");
+ while ($line = <FILE>) {
+ if ($line =~ /^\s+\$/) {
+ $line =~ s/^\s+\$//;
+ $var = $line;
+
+ $var =~ s/=/EQUALS/;
+ if ($var =~ /^([a-z]|[A-Z])/) {
+ @o = split(/\s*EQUALS\s*/, $var);
+ if ($o[0] eq "config_version") {
+ $o[1] =~ s/[\n|\r]//g;
+ $o[1] =~ s/\";\s*$//;
+ $o[1] =~ s/;$//;
+ $o[1] =~ s/^"//;
+
+ $config_version = $o[1];
+ close (FILE);
+ }
+ }
+ }
+ }
+ close (FILE);
+
+ if ($config_version ne $conf_pl_version) {
+ system "clear";
+ print $WHT."WARNING:\n".$NRM;
+ print " You are trying to use a \"config_default.php\" from an older version of\n";
+ print " SquirrelMail. This is HIGHLY unrecommended. You should get the\n";
+ print " \"config_default.php\" that matches the version of SquirrelMail that you\n";
+ print " are running. You can get this from the SquirrelMail web page by going\n";
+ print " to: http://www.squirrelmail.org.\n\n";
+ print "Continue loading with the old config_default.php (not a good idea) [y/n]? ";
+ $ctu = <STDIN>;
+ if (($ctu =~ /^n\n/i) || ($ctu =~ /^\n/)) {
+ exit;
+ }
+
+ print "\nDo you want me to stop warning you [y/n]? ";
+ $ctu = <STDIN>;
+ if ($ctu =~ /^y\n/i) {
+ $print_config_version = $conf_pl_version;
+ } else {
+ $print_config_version = $config_version;
+ }
+ } else {
+ $print_config_version = $config_version;
+ }
+ $config = 2;
+ open (FILE, "config_default.php");
} else {
- print "No config file found. Reading from config_defaults.php.\n\n";
- open (FILE, "config_default.php");
+ print "No configuration file found. Please get config_default.php or\n";
+ print "config.php before running this again. This program needs a\n";
+ print "default config file to get default values.\n";
+ exit;
}
# Reads and parses the current configuration file (either
# config.php or config_default.php).
while ($line = <FILE>) {
- if ($line =~ /^\s+\$/) {
- $line =~ s/^\s+\$//;
- $var = $line;
-
- if ($var =~ /^([a-z]|[A-Z])/) {
- @options = split(/\s=\s/, $var);
- $options[1] =~ s/[\n|\r]//g;
- $options[1] =~ s/^"//g;
- $options[1] =~ s/;.*$//g;
- $options[1] =~ s/"$//g;
-
- if ($options[0] =~ /^special_folders/) {
- if ($options[0] =~ /\[.*\]$/) {
- $sub = $options[0];
- $sub =~ s/\]$//;
- $sub = substr ($sub, @sub-1, 1);
-
- $special_folders[$sub] = $options[1];
- }
- } elsif ($options[0] =~ /^theme\[[0-9]+\]\["PATH"\]/) {
- $sub = $options[0];
- $sub =~ s/\]\["PATH"\]//;
- $sub = substr ($sub, @sub-1, 1);
- $theme_path[$sub] = $options[1];
- } elsif ($options[0] =~ /^theme\[[0-9]+\]\["NAME"\]/) {
- $sub = $options[0];
- $sub =~ s/\]\["NAME"\]//;
- $sub = substr ($sub, @sub-1, 1);
- $theme_name[$sub] = $options[1];
- } else {
- ${$options[0]} = $options[1];
- }
- }
- }
-}
-
-open (FILE, ">cf.php");
-print FILE "<?\n\t/** SquirrelMail configure script\n";
-print FILE " ** Created using the configure script, config.pl.\n\t **/\n\n";
+ if ($line =~ /^\s+\$/) {
+ $line =~ s/^\s+\$//;
+ $var = $line;
+
+ $var =~ s/=/EQUALS/;
+ if ($var =~ /^([a-z]|[A-Z])/) {
+ @options = split(/\s*EQUALS\s*/, $var);
+ $options[1] =~ s/[\n|\r]//g;
+ $options[1] =~ s/\";\s*$//;
+ $options[1] =~ s/;$//;
+ $options[1] =~ s/^"//;
+ if ($options[0] =~ /^theme\[[0-9]+\]\["PATH"\]/) {
+ $sub = $options[0];
+ $sub =~ s/\]\["PATH"\]//;
+ $sub =~ s/.*\[//;
+ if (-e "../themes") {
+ $options[1] =~ s/^\.\.\/config/\.\.\/themes/;
+ }
+ $theme_path[$sub] = $options[1];
+ } elsif ($options[0] =~ /^theme\[[0-9]+\]\["NAME"\]/) {
+ $sub = $options[0];
+ $sub =~ s/\]\["NAME"\]//;
+ $sub =~ s/.*\[//;
+ $theme_name[$sub] = $options[1];
+ } elsif ($options[0] =~ /^plugins\[[0-9]+\]/) {
+ $sub = $options[0];
+ $sub =~ s/\]//;
+ $sub =~ s/^plugins\[//;
+ $plugins[$sub] = $options[1];
+ } elsif ($options[0] =~ /^ldap_server\[[0-9]+\]/) {
+ $sub = $options[0];
+ $sub =~ s/\]//;
+ $sub =~ s/^ldap_server\[//;
+ $continue = 0;
+ while (($tmp = <FILE>) && ($continue != 1)) {
+ if ($tmp =~ /\);\s*$/) {
+ $continue = 1;
+ }
+
+ if ($tmp =~ /^\s*"host"/i) {
+ $tmp =~ s/^\s*"host"\s*=>\s*"//i;
+ $tmp =~ s/",\s*$//;
+ $tmp =~ s/"\);\s*$//;
+ $host = $tmp;
+ } elsif ($tmp =~ /^\s*"base"/i) {
+ $tmp =~ s/^\s*"base"\s*=>\s*"//i;
+ $tmp =~ s/",\s*$//;
+ $tmp =~ s/"\);\s*$//;
+ $base = $tmp;
+ } elsif ($tmp =~ /^\s*"charset"/i) {
+ $tmp =~ s/^\s*"charset"\s*=>\s*"//i;
+ $tmp =~ s/",\s*$//;
+ $tmp =~ s/"\);\s*$//;
+ $charset = $tmp;
+ } elsif ($tmp =~ /^\s*"port"/i) {
+ $tmp =~ s/^\s*"port"\s*=>\s*"//i;
+ $tmp =~ s/",\s*$//;
+ $tmp =~ s/"\);\s*$//;
+ $port = $tmp;
+ } elsif ($tmp =~ /^\s*"maxrows"/i) {
+ $tmp =~ s/^\s*"maxrows"\s*=>\s*"//i;
+ $tmp =~ s/",\s*$//;
+ $tmp =~ s/"\);\s*$//;
+ $maxrows = $tmp;
+ } elsif ($tmp =~ /^\s*"name"/i) {
+ $tmp =~ s/^\s*"name"\s*=>\s*"//i;
+ $tmp =~ s/",\s*$//;
+ $tmp =~ s/"\);\s*$//;
+ $name = $tmp;
+ }
+ }
+ $ldap_host[$sub] = $host;
+ $ldap_base[$sub] = $base;
+ $ldap_name[$sub] = $name;
+ $ldap_port[$sub] = $port;
+ $ldap_maxrows[$sub] = $maxrows;
+ $ldap_charset[$sub] = $charset;
+ } else {
+ ${$options[0]} = $options[1];
+ }
+ }
+ }
+}
+close FILE;
+if ($useSendmail ne "true") {
+ $useSendmail = "false";
+}
+if (!$sendmail_path) {
+ $sendmail_path = "/usr/sbin/sendmail";
+}
+if (!$default_unseen_notify) {
+ $default_unseen_notify = 2;
+}
+if (!$default_unseen_type) {
+ $default_unseen_type = 1;
+}
+if (!$config_use_color) {
+ $config_use_color = 1;
+}
#####################################################################################
+if ($config_use_color == 1) {
+ $WHT = "\x1B[37;1m";
+ $NRM = "\x1B[0m";
+} else {
+ $WHT = "";
+ $NRM = "";
+ $config_use_color = 2;
+}
+
+while (($command ne "q") && ($command ne "Q")) {
+ system "clear";
+ print $WHT."SquirrelMail Configuration : ".$NRM;
+ if ($config == 1) { print "Read: config.php"; }
+ elsif ($config == 2) { print "Read: config_default.php"; }
+ print "\n";
+ print "---------------------------------------------------------\n";
+
+ if ($menu == 0) {
+ print $WHT."Main Menu --\n".$NRM;
+ print "1. Organization Preferences\n";
+ print "2. Server Settings\n";
+ print "3. Folder Defaults\n";
+ print "4. General Options\n";
+ print "5. Themes\n";
+ print "6. Address Books (LDAP)\n";
+ print "7. Message of the Day (MOTD)\n";
+ print "8. Plugins\n";
+ print "\n";
+ print "D. Set pre-defined settings for specific IMAP servers\n";
+ print "\n";
+ } elsif ($menu == 1) {
+ print $WHT."Organization Preferences\n".$NRM;
+ print "1. Organization Name : $WHT$org_name$NRM\n";
+ print "2. Organization Logo : $WHT$org_logo$NRM\n";
+ print "3. Organization Title : $WHT$org_title$NRM\n";
+ print "\n";
+ print "R Return to Main Menu\n";
+ } elsif ($menu == 2) {
+ print $WHT."Server Settings\n".$NRM;
+ print "1. Domain : $WHT$domain$NRM\n";
+ print "2. IMAP Server : $WHT$imapServerAddress$NRM\n";
+ print "3. IMAP Port : $WHT$imapPort$NRM\n";
+ print "4. Use Sendmail/SMTP : $WHT";
+ if ($useSendmail eq "true") {
+ print "Sendmail";
+ } else {
+ print "SMTP";
+ }
+ print "$NRM\n";
+ if ($useSendmail eq "true") {
+ print "5. Sendmail Path : $WHT$sendmail_path$NRM\n";
+ } else {
+ print "6. SMTP Server : $WHT$smtpServerAddress$NRM\n";
+ print "7. SMTP Port : $WHT$smtpPort$NRM\n";
+ }
+ print "8. Server : $WHT$imap_server_type$NRM\n";
+ print "\n";
+ print "R Return to Main Menu\n";
+ } elsif ($menu == 3) {
+ print $WHT."Folder Defaults\n".$NRM;
+ print "1. Default Folder Prefix : $WHT$default_folder_prefix$NRM\n";
+ print "2. Show Folder Prefix Option : $WHT$show_prefix_option$NRM\n";
+ print "3. Trash Folder : $WHT$trash_folder$NRM\n";
+ print "4. Sent Folder : $WHT$sent_folder$NRM\n";
+ print "5. By default, move to trash : $WHT$default_move_to_trash$NRM\n";
+ print "6. By default, move to sent : $WHT$default_move_to_sent$NRM\n";
+ print "7. List Special Folders First : $WHT$list_special_folders_first$NRM\n";
+ print "8. Show Special Folders Color : $WHT$use_special_folder_color$NRM\n";
+ print "9. Auto Expunge : $WHT$auto_expunge$NRM\n";
+ print "10. Default Sub. of INBOX : $WHT$default_sub_of_inbox$NRM\n";
+ print "11. Show 'Contain Sub.' Option : $WHT$show_contain_subfolders_option$NRM\n";
+ print "12. Default Unseen Notify : $WHT$default_unseen_notify$NRM\n";
+ print "13. Default Unseen Type : $WHT$default_unseen_type$NRM\n";
+ print "\n";
+ print "R Return to Main Menu\n";
+ } elsif ($menu == 4) {
+ print $WHT."General Options\n".$NRM;
+ print "1. Default Charset : $WHT$default_charset$NRM\n";
+ print "2. Data Directory : $WHT$data_dir$NRM\n";
+ print "3. Attachment Directory : $WHT$attachment_dir$NRM\n";
+ print "4. Default Left Size : $WHT$default_left_size$NRM\n";
+ print "\n";
+ print "R Return to Main Menu\n";
+ } elsif ($menu == 5) {
+ print $WHT."Themes\n".$NRM;
+ print "1. Change Themes\n";
+ for ($count = 0; $count <= $#theme_name; $count++) {
+ print " > $theme_name[$count]\n";
+ }
+ print "\n";
+ print "R Return to Main Menu\n";
+ } elsif ($menu == 6) {
+ print $WHT."Address Books (LDAP)\n".$NRM;
+ print "1. Change Servers\n";
+ for ($count = 0; $count <= $#ldap_host; $count++) {
+ print " > $ldap_host[$count]\n";
+ }
+ print "2. Use Javascript Address Book Search : $WHT$default_use_javascript_addr_book$NRM\n";
+ print "\n";
+ print "R Return to Main Menu\n";
+ } elsif ($menu == 7) {
+ print $WHT."Message of the Day (MOTD)\n".$NRM;
+ print "\n$motd\n";
+ print "\n";
+ print "1 Edit the MOTD\n";
+ print "\n";
+ print "R Return to Main Menu\n";
+ } elsif ($menu == 8) {
+ print $WHT."Plugins\n".$NRM;
+ print " Installed Plugins\n";
+ $num = 0;
+ for ($count = 0; $count <= $#plugins; $count++) {
+ $num = $count + 1;
+ print " $num. $plugins[$count]\n";
+ }
+ print "\n Available Plugins:\n";
+ opendir(DIR, "../plugins");
+ @files = readdir(DIR);
+ $pos=0;
+ @unused_plugins = ();
+ chdir ("../plugins");
+ for ($i=0; $i <= $#files; $i++) {
+ if ( -d $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne "CVS") {
+ $match = 0;
+ for ($k=0; $k<=$#plugins; $k++) {
+ if ($plugins[$k] eq $files[$i]) {
+ $match = 1;
+ }
+ }
+ if ($match == 0) {
+ $unused_plugins[$pos] = $files[$i];
+ $pos++;
+ }
+ }
+ }
+ chdir ("../config");
+
+ for ($i=0; $i<=$#unused_plugins; $i++) {
+ $num = $num + 1;
+ print " $num. $unused_plugins[$i]\n";
+ }
+ closedir DIR;
+
+ print "\n";
+ print "R Return to Main Menu\n";
+ }
+ if ($config_use_color == 1) {
+ print "C. Turn color off\n";
+ } else {
+ print "C. Turn color on\n";
+ }
+ print "S Save data\n";
+ print "Q Quit\n";
+
+ print "\n";
+ print "Command >> ".$WHT;
+ $command = <STDIN>;
+ $command =~ s/[\n|\r]//g;
+ print "$NRM\n";
+
+ # Read the commands they entered.
+ if (($command eq "R") || ($command eq "r")) {
+ $menu = 0;
+ } elsif (($command eq "s") || ($command eq "S")) {
+ save_data ();
+ print "Data saved in config.php\n";
+ print "Press any key to continue...";
+ $tmp = <STDIN>;
+ $saved = 1;
+ } elsif ((($command eq "q") || ($command eq "Q")) && ($saved == 0)) {
+ print "You have not saved your data.\n";
+ print "Save? (y/n) [".$WHT."y".$NRM."]: ";
+ $save = <STDIN>;
+ if (($save =~ /^y/i) || ($save =~ /^\s*$/)) {
+ save_data ();
+ }
+ } elsif (($command eq "c") || ($command eq "C")) {
+ if ($config_use_color == 1) {
+ $config_use_color = 2;
+ $WHT = "";
+ $NRM = "";
+ } else {
+ $config_use_color = 1;
+ $WHT = "\x1B[37;1m";
+ $NRM = "\x1B[0m";
+ }
+ } elsif ((($command eq "d") || ($command eq "D")) && $menu == 0) {
+ set_defaults ();
+ } else {
+ $saved = 0;
+ if ($menu == 0) {
+ if (($command > 0) && ($command < 9)) {
+ $menu = $command;
+ }
+ } elsif ($menu == 1) {
+ if ($command == 1) { $org_name = command1 (); }
+ elsif ($command == 2) { $org_logo = command2 (); }
+ elsif ($command == 3) { $org_title = command3 (); }
+ } elsif ($menu == 2) {
+ if ($command == 1) { $domain = command11 (); }
+ elsif ($command == 2) { $imapServerAddress = command12 (); }
+ elsif ($command == 3) { $imapPort = command13 (); }
+ elsif ($command == 4) { $useSendmail = command14 (); }
+ elsif ($command == 5) { $sendmail_path = command15 (); }
+ elsif ($command == 6) { $smtpServerAddress = command16 (); }
+ elsif ($command == 7) { $smtpPort = command17 (); }
+ elsif ($command == 8) { $imap_server_type = command18 (); }
+ } elsif ($menu == 3) {
+ if ($command == 1) { $default_folder_prefix = command21 (); }
+ elsif ($command == 2) { $show_prefix_option = command22 (); }
+ elsif ($command == 3) { $trash_folder = command23 (); }
+ elsif ($command == 4) { $sent_folder = command24 (); }
+ elsif ($command == 5) { $default_move_to_trash = command25 (); }
+ elsif ($command == 6) { $default_move_to_sent = command26 (); }
+ elsif ($command == 7) { $list_special_folders_first = command27 (); }
+ elsif ($command == 8) { $use_special_folder_color = command28 (); }
+ elsif ($command == 9) { $auto_expunge = command29 (); }
+ elsif ($command == 10){ $default_sub_of_inbox = command210(); }
+ elsif ($command == 11){ $show_contain_subfolders_option = command211(); }
+ elsif ($command == 12){ $default_unseen_notify = command212(); }
+ elsif ($command == 13){ $default_unseen_type = command213(); }
+ } elsif ($menu == 4) {
+ if ($command == 1) { $default_charset = command31 (); }
+ elsif ($command == 2) { $data_dir = command33 (); }
+ elsif ($command == 3) { $attachment_dir = command34 (); }
+ elsif ($command == 4) { $default_left_size = command35 (); }
+ } elsif ($menu == 5) {
+ if ($command == 1) {
+ command41 ();
+ }
+ } elsif ($menu == 6) {
+ if ($command == 1) { command61(); }
+ elsif ($command == 2) { command62(); }
+ } elsif ($menu == 7) {
+ if ($command == 1) { $motd = command71(); }
+ } elsif ($menu == 8) {
+ if ($command =~ /^[0-9]+/) { @plugins = command81(); }
+ }
+ }
+}
+
+####################################################################################
# org_name
sub command1 {
print "possible. If you set up an organization name, most places where\n";
print "SquirrelMail would take credit will be credited to your organization.\n";
print "\n";
- print "What is the name of your organization [$org_name]: ";
- $new_org_name = <STDIN>;
- if ($new_org_name eq "\n") {
- $new_org_name = $org_name;
- } else {
- $new_org_name =~ s/[\r|\n]//g;
- }
+ print "[$WHT$org_name$NRM]: $WHT";
+ $new_org_name = <STDIN>;
+ if ($new_org_name eq "\n") {
+ $new_org_name = $org_name;
+ } else {
+ $new_org_name =~ s/[\r|\n]//g;
+ }
return $new_org_name;
}
+
# org_logo
sub command2 {
print "Your organization's logo is an image that will be displayed at\n";
print "literal (/usr/local/squirrelmail/images/logo.jpg) or relative\n";
print "(../images/logo.jpg) path to your logo.\n";
print "\n";
- print "Where is the logo for your organization [$org_logo]: ";
+ print "[$WHT$org_logo$NRM]: $WHT";
$new_org_logo = <STDIN>;
if ($new_org_logo eq "\n") {
$new_org_logo = $org_logo;
print "the titlebar. Usually this will end up looking something like:\n";
print "\"Netscape: $org_title\"\n";
print "\n";
- print "The title of the web page [$org_title]: ";
+ print "[$WHT$org_title$NRM]: $WHT";
$new_org_title = <STDIN>;
if ($new_org_title eq "\n") {
$new_org_title = $org_title;
}
return $new_org_title;
}
-
-# domain
-sub command10 {
- print "The domain is what is on the right side of the \@ in the email\n";
- print "address. If your address is somebody\@somewhere.com, then your\n";
- print "domain would be \"somewhere.com\".\n";
+
+####################################################################################
+
+# domain
+sub command11 {
+ print "The domain name is the suffix at the end of all email messages. If\n";
+ print "for example, your email address is jdoe\@myorg.com, then your domain\n";
+ print "would be myorg.com.\n";
print "\n";
- print "Your domain [$WHT$domain$NRM]: ".$WHT;
+ print "[$WHT$domain$NRM]: $WHT";
$new_domain = <STDIN>;
if ($new_domain eq "\n") {
$new_domain = $domain;
return $new_domain;
}
-#####################################################################################
+# imapServerAddress
+sub command12 {
+ print "This is the address where your IMAP server resides.\n";
+ print "[$WHT$imapServerAddress$NRM]: $WHT";
+ $new_imapServerAddress = <STDIN>;
+ if ($new_imapServerAddress eq "\n") {
+ $new_imapServerAddress = $imapServerAddress;
+ } else {
+ $new_imapServerAddress =~ s/[\r|\n]//g;
+ }
+ return $new_imapServerAddress;
+}
-while (($command ne "q") && ($command ne "Q")) {
- system "clear";
- print $WHT."General Information --\n".$NRM;
- print "1 Name of organization : $WHT$org_name$NRM\n";
- print "2 Where is your logo : $WHT$org_logo$NRM\n";
- print "3 Title of web page : $WHT$org_title$NRM\n";
- print "\n";
- print $WHT."Server Information --\n".$NRM;
- print "10 Domain : $WHT$domain$NRM\n";
- print "11 IMAP server : \n";
- print "12 IMAP port : \n";
- print "13 Use Sendmail? : \n";
- if (@vars[4] eq "true") {
- print "14 Sendmail path : \n";
- } else {
- print "15 SMTP server : \n";
- print "16 SMTP port : \n";
- }
- print "\n";
- print $WHT."General Options --\n".$NRM;
- print "20 Welcome message\n";
- print "21 Auto expunge : @vars[10]\n";
- print "22 Fodlers sub of INBOX : @vars[11]\n";
- print "\n";
- print "x Exit without saving\n";
- print "q Save and exit\n";
- print "\n";
- print "Command: ";
-
- $command = <STDIN>;
- $command =~ s/[\n|\r]//g;
-
- print "\n";
-
- if ($command eq "1" ) { $org_name = command1 (); }
- elsif ($command eq "2" ) { $org_logo = command2 (); }
- elsif ($command eq "3" ) { $org_title = command3 (); }
-
- elsif ($command eq "10") { $domain = command10 (); }
- elsif ($command eq "11") { $imapServerAddress = command11 (); }
- elsif ($command eq "12") { $imapPort = command12 (); }
- elsif ($command eq "13") { $use_sendmail = command3 (); }
- elsif ($command eq "14") { $org_title = command3 (); }
- elsif ($command eq "15") { $org_title = command3 (); }
+# imapPort
+sub command13 {
+ print "This is the port that your IMAP server is on. Usually this is 143.\n";
+ print "[$WHT$imapPort$NRM]: $WHT";
+ $new_imapPort = <STDIN>;
+ if ($new_imapPort eq "\n") {
+ $new_imapPort = $imapPort;
+ } else {
+ $new_imapPort =~ s/[\r|\n]//g;
+ }
+ return $new_imapPort;
+}
+
+# useSendmail
+sub command14 {
+ print "You now need to choose the method that you will use for sending\n";
+ print "messages in SquirrelMail. You can either connect to an SMTP server\n";
+ print "or use sendmail directly.\n";
+ if ($useSendmail eq "true") {
+ $default_value = "1";
+ } else {
+ $default_value = "2";
+ }
+ print "\n";
+ print " 1. Sendmail\n";
+ print " 2. SMTP\n";
+ print "Your choice [1/2] [$WHT$default_value$NRM]: $WHT";
+ $use_sendmail = <STDIN>;
+ if (($use_sendmail =~ /^1\n/i) || (($use_sendmail =~ /^\n/) && ($default_value eq "1"))) {
+ $useSendmail = "true";
+ } else {
+ $useSendmail = "false";
+ }
+ return $useSendmail;
+}
+
+# sendmail_path
+sub command15 {
+ if ($sendmail_path[0] !~ /./) {
+ $sendmail_path = "/usr/sbin/sendmail";
+ }
+ print "Specify where the sendmail executable is located. Usually /usr/sbin/sendmail\n";
+ print "[$WHT$sendmail_path$NRM]: $WHT";
+ $new_sendmail_path = <STDIN>;
+ if ($new_sendmail_path eq "\n") {
+ $new_sendmail_path = $sendmail_path;
+ } else {
+ $new_sendmail_path =~ s/[\r|\n]//g;
+ }
+ return $new_sendmail_path;
+}
+
+# smtpServerAddress
+sub command16 {
+ print "This is the location of your SMTP server.\n";
+ print "[$WHT$smtpServerAddress$NRM]: $WHT";
+ $new_smtpServerAddress = <STDIN>;
+ if ($new_smtpServerAddress eq "\n") {
+ $new_smtpServerAddress = $smtpServerAddress;
+ } else {
+ $new_smtpServerAddress =~ s/[\r|\n]//g;
+ }
+ return $new_smtpServerAddress;
+}
+
+# smtpPort
+sub command17 {
+ print "This is the port to connect to for SMTP. Usually 25.\n";
+ print "[$WHT$smtpPort$NRM]: $WHT";
+ $new_smtpPort = <STDIN>;
+ if ($new_smtpPort eq "\n") {
+ $new_smtpPort = $smtpPort;
+ } else {
+ $new_smtpPort =~ s/[\r|\n]//g;
+ }
+ return $new_smtpPort;
+}
+# imap_server_type
+sub command18 {
+ print "Eash IMAP server has its own quirks. As much as we tried to stick\n";
+ print "to standards, it doesn't help much if the IMAP server doesn't follow\n";
+ print "the same principles. We have made some work-arounds for some of\n";
+ print "these servers. If you would like to use them, please select your\n";
+ print "IMAP server. If you do not wish to use these work-arounds, you can\n";
+ print "set this to \"other\", and none will be used.\n";
+ print " cyrus = Cyrus IMAP server\n";
+ print " uw = University of Washington's IMAP server\n";
+ print " exchange = Microsoft Exchange IMAP server\n";
+ print " courier = Courier IMAP server\n";
+ print "[$WHT$imap_server_type$NRM]: $WHT";
+ $new_imap_server_type = <STDIN>;
+ if ($new_imap_server_type eq "\n") {
+ $new_imap_server_type = $imap_server_type;
+ } else {
+ $new_imap_server_type =~ s/[\r|\n]//g;
+ }
+ return $new_imap_server_type;
+}
+
+# MOTD
+sub command71 {
+ print "\nYou can now create the welcome message that is displayed\n";
+ print "every time a user logs on. You can use HTML or just plain\n";
+ print "text. If you do not wish to have one, just make it blank.\n\n(Type @ on a blank line to exit)\n";
+
+ $new_motd = "";
+ do {
+ print "] ";
+ $line = <STDIN>;
+ $line =~ s/[\r|\n]//g;
+ if ($line ne "@") {
+ $line =~ s/ /\ \ /g;
+ $line =~ s/\t/\ \ \ \ /g;
+ $line =~ s/$/ /;
+ $line =~ s/\"/\\\"/g;
+
+ $new_motd = $new_motd . $line;
+ }
+ } while ($line ne "@");
+ return $new_motd;
+}
+
+################# PLUGINS ###################
+
+sub command81 {
+ $command =~ s/[\s|\n|\r]*//g;
+ if ($command > 0) {
+ $command = $command - 1;
+ if ($command <= $#plugins) {
+ @newplugins = ();
+ $ct=0;
+ while ($ct <= $#plugins) {
+ if ($ct != $command) {
+ @newplugins = (@newplugins, $plugins[$ct]);
+ }
+ $ct++;
+ }
+ @plugins = @newplugins;
+ } elsif ($command <= $#plugins + $#unused_plugins + 1) {
+ $num = $command - $#plugins - 1;
+ @newplugins = @plugins;
+ $ct=0;
+ while ($ct <= $#unused_plugins) {
+ if ($ct == $num) {
+ @newplugins = (@newplugins, $unused_plugins[$ct]);
+ }
+ $ct++;
+ }
+ @plugins = @newplugins;
+ }
+ }
+ return @plugins;
+}
+
+################# FOLDERS ###################
+
+# default_folder_prefix
+sub command21 {
+ print "Some IMAP servers (UW, for example) store mail and folders in\n";
+ print "your user space in a separate subdirectory. This is where you\n";
+ print "specify what that directory is.\n";
+ print "\n";
+ print "EXAMPLE: mail/";
+ print "\n";
+ print "NOTE: If you use Cyrus, or some server that would not use this\n";
+ print " option, you must set this to 'none'.\n";
+ print "\n";
+ print "[$WHT$default_folder_prefix$NRM]: $WHT";
+ $new_default_folder_prefix = <STDIN>;
+ if ($new_default_folder_prefix eq "\n") {
+ $new_default_folder_prefix = $default_folder_prefix;
+ } else {
+ $new_default_folder_prefix =~ s/[\r|\n]//g;
+ }
+ if (($new_default_folder_prefix =~ /^\s*$/) || ($new_default_folder_prefix =~ /none/i)) {
+ $new_default_folder_prefix = "";
+ } else {
+ $new_default_folder_prefix =~ s/\/*$//g;
+ $new_default_folder_prefix =~ s/$/\//g;
+ }
+ return $new_default_folder_prefix;
+}
+
+# Show Folder Prefix
+sub command22 {
+ print "It is possible to set up the default folder prefix as a user\n";
+ print "specific option, where each user can specify what their mail\n";
+ print "folder is. If you set this to false, they will never see the\n";
+ print "option, but if it is true, this option will appear in the\n";
+ print "'options' section.\n";
+ print "\n";
+ print "NOTE: You set the default folder prefix in option '1' of this\n";
+ print " section. That will be the default if the user doesn't\n";
+ print " specify anything different.\n";
+ print "\n";
+
+ if ($show_prefix_option eq "true") {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "\n";
+ print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if (($new_show =~ /^y\n/i) || (($new_show =~ /^\n/) && ($default_value eq "y"))) {
+ $show_prefix_option = "true";
+ } else {
+ $show_prefix_option = "false";
+ }
+ return $show_prefix_option;
+}
+
+# Trash Folder
+sub command23 {
+ print "You can now specify where the default trash folder is located.\n";
+ print "On servers where you do not want this, you can set it to anything\n";
+ print "and set option 7 to false.\n";
+ print "\n";
+ print "This is relative to where the rest of your email is kept. You do\n";
+ print "not need to worry about their mail directory. If this folder\n";
+ print "would be ~/mail/trash on the filesystem, you only need to specify\n";
+ print "that this is 'trash', and be sure to put 'mail/' in option 1.\n";
+ print "\n";
+
+ print "[$WHT$trash_folder$NRM]: $WHT";
+ $new_trash_folder = <STDIN>;
+ if ($new_trash_folder eq "\n") {
+ $new_trash_folder = $trash_folder;
+ } else {
+ $new_trash_folder =~ s/[\r|\n]//g;
+ }
+ return $new_trash_folder;
+}
+
+# Sent Folder
+sub command24 {
+ print "This is where messages that are sent will be stored. SquirrelMail\n";
+ print "by default puts a copy of all outgoing messages in this folder.\n";
+ print "\n";
+ print "This is relative to where the rest of your email is kept. You do\n";
+ print "not need to worry about their mail directory. If this folder\n";
+ print "would be ~/mail/sent on the filesystem, you only need to specify\n";
+ print "that this is 'sent', and be sure to put 'mail/' in option 1.\n";
+ print "\n";
+
+ print "[$WHT$sent_folder$NRM]: $WHT";
+ $new_sent_folder = <STDIN>;
+ if ($new_sent_folder eq "\n") {
+ $new_sent_folder = $sent_folder;
+ } else {
+ $new_sent_folder =~ s/[\r|\n]//g;
+ }
+ return $new_sent_folder;
+}
+
+# default move to trash
+sub command25 {
+ print "By default, should messages get moved to the trash folder? You\n";
+ print "can specify the default trash folder in option 3. If this is set\n";
+ print "to false, messages will get deleted immediately without moving\n";
+ print "to the trash folder.\n";
+ print "\n";
+ print "Trash folder is currently: $trash_folder\n";
+ print "\n";
+
+ if ($default_move_to_trash eq "true") {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "By default, move to trash (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if (($new_show =~ /^y\n/i) || (($new_show =~ /^\n/) && ($default_value eq "y"))) {
+ $default_move_to_trash = "true";
+ } else {
+ $default_move_to_trash = "false";
+ }
+ return $default_move_to_trash;
+}
+
+# default move to sent
+sub command26 {
+ print "By default, should messages get moved to the sent folder? You\n";
+ print "can specify the default sent folder in option 4. If this is set\n";
+ print "to false, messages will get sent an no copy will be made.\n";
+ print "\n";
+ print "Trash folder is currently: $sent_folder\n";
+ print "\n";
+
+ if ($default_move_to_sent eq "true") {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "By default, move to sent (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if (($new_show =~ /^y\n/i) || (($new_show =~ /^\n/) && ($default_value eq "y"))) {
+ $default_move_to_sent = "true";
+ } else {
+ $default_move_to_sent = "false";
+ }
+ return $default_move_to_sent;
+}
+
+# List special folders first
+sub command27 {
+ print "SquirrelMail has what we call 'special folders' that are not\n";
+ print "manipulated and viewed like normal folders. Some examples of\n";
+ print "these folders would be INBOX, Trash, Sent, etc. This option\n";
+ print "Simply asks if you want these folders listed first in the folder\n";
+ print "listing.\n";
+ print "\n";
+
+ if ($list_special_folders_first eq "true") {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "\n";
+ print "List first (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if (($new_show =~ /^y\n/i) || (($new_show =~ /^\n/) && ($default_value eq "y"))) {
+ $list_special_folders_first = "true";
+ } else {
+ $list_special_folders_first = "false";
+ }
+ return $list_special_folders_first;
+}
+
+# Show special folders color
+sub command28 {
+ print "SquirrelMail has what we call 'special folders' that are not\n";
+ print "manipulated and viewed like normal folders. Some examples of\n";
+ print "these folders would be INBOX, Trash, Sent, etc. This option\n";
+ print "wants to know if we should display special folders in a\n";
+ print "color than the other folders.\n";
+ print "\n";
+
+ if ($use_special_folder_color eq "true") {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "\n";
+ print "Show color (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if (($new_show =~ /^y\n/i) || (($new_show =~ /^\n/) && ($default_value eq "y"))) {
+ $use_special_folder_color = "true";
+ } else {
+ $use_special_folder_color = "false";
+ }
+ return $use_special_folder_color;
+}
+
+# Auto expunge
+sub command29 {
+ print "The way that IMAP handles deleting messages is as follows. You\n";
+ print "mark the message as deleted, and then to 'really' delete it, you\n";
+ print "expunge it. This option asks if you want to just have messages\n";
+ print "marked as deleted, or if you want SquirrelMail to expunge the \n";
+ print "messages too.\n";
+ print "\n";
+
+ if ($auto_expunge eq "true") {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Auto expunge (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if (($new_show =~ /^y\n/i) || (($new_show =~ /^\n/) && ($default_value eq "y"))) {
+ $auto_expunge = "true";
+ } else {
+ $auto_expunge = "false";
+ }
+ return $auto_expunge;
+}
+
+# Default sub of inbox
+sub command210 {
+ print "Some IMAP servers (Cyrus) have all folders as subfolders of INBOX.\n";
+ print "This can cause some confusion in folder creation for users when\n";
+ print "they try to create folders and don't put it as a subfolder of INBOX\n";
+ print "and get permission errors. This option asks if you want folders\n";
+ print "to be subfolders of INBOX by default.\n";
+ print "\n";
+
+ if ($default_sub_of_inbox eq "true") {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Default sub of INBOX (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if (($new_show =~ /^y\n/i) || (($new_show =~ /^\n/) && ($default_value eq "y"))) {
+ $default_sub_of_inbox = "true";
+ } else {
+ $default_sub_of_inbox = "false";
+ }
+ return $default_sub_of_inbox;
+}
+
+# Show contain subfolder option
+sub command211 {
+ print "Some IMAP servers (UW) make it so that there are two types of\n";
+ print "folders. Those that contain messages, and those that contain\n";
+ print "subfolders. If this is the case for your server, set this to\n";
+ print "true, and it will ask the user whether the folder they are\n";
+ print "creating contains subfolders or messages.\n";
+ print "\n";
+
+ if ($show_contain_subfolders_option eq "true") {
+ $default_value = "y";
+ } else {
+ $default_value = "n";
+ }
+ print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if (($new_show =~ /^y\n/i) || (($new_show =~ /^\n/) && ($default_value eq "y"))) {
+ $show_contain_subfolders_option = "true";
+ } else {
+ $show_contain_subfolders_option = "false";
+ }
+ return $show_contain_subfolders_option;
+}
+
+# Default Unseen Notify
+sub command212 {
+ print "This option specifies where the users will receive notification\n";
+ print "about unseen messages by default. This is of course an option that\n";
+ print "can be changed on a user level.\n";
+ print " 1 = No notification\n";
+ print " 2 = Only on the INBOX\n";
+ print " 3 = On all folders\n";
+ print "\n";
+
+ print "Which one should be default (1,2,3)? [$WHT$default_unseen_notify$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ($new_show =~ /^[1|2|3]\n/i) {
+ $default_unseen_notify = $new_show;
+ }
+ $default_unseen_notify =~ s/[\r|\n]//g;
+ return $default_unseen_notify;
+}
+
+# Default Unseen Type
+sub command213 {
+ print "Here you can define the default way that unseen messages will be displayed\n";
+ print "to the user in the folder listing on the left side.\n";
+ print " 1 = Only unseen messages (4)\n";
+ print " 2 = Unseen and Total messages (4/27)\n";
+ print "\n";
+
+ print "Which one should be default (1,2)? [$WHT$default_unseen_type$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if ($new_show =~ /^[1|2]\n/i) {
+ $default_unseen_type = $new_show;
+ }
+ $default_unseen_type =~ s/[\r|\n]//g;
+ return $default_unseen_type;
+}
+
+
+############# GENERAL OPTIONS #####################
+
+# Default Charset
+sub command31 {
+ print "This option controls what character set is used when sending\n";
+ print "mail and when sending HTML to the browser. Do not set this\n";
+ print "to US-ASCII, use ISO-8859-1 instead. For cyrillic, it is best\n";
+ print "to use KOI8-R, since this implementation is faster than most\n";
+ print "of the alternatives\n";
+ print "\n";
+
+ print "[$WHT$default_charset$NRM]: $WHT";
+ $new_default_charset = <STDIN>;
+ if ($new_default_charset eq "\n") {
+ $new_default_charset = $default_charset;
+ } else {
+ $new_default_charset =~ s/[\r|\n]//g;
+ }
+ return $new_default_charset;
+}
+
+# Data directory
+sub command33 {
+ print "It is a possible security hole to have a writable directory\n";
+ print "under the web server's root directory (ex: /home/httpd/html).\n";
+ print "For this reason, it is possible to put the data directory\n";
+ print "anywhere you would like. The path name can be absolute or\n";
+ print "relative (to the config directory). It doesn't matter. Here\n";
+ print "are two examples:\n";
+ print " Absolute: /usr/local/squirrelmail/data/\n";
+ print " Relative: ../data/\n";
+ print "\n";
+
+ print "[$WHT$data_dir$NRM]: $WHT";
+ $new_data_dir = <STDIN>;
+ if ($new_data_dir eq "\n") {
+ $new_data_dir = $data_dir;
+ } else {
+ $new_data_dir =~ s/[\r|\n]//g;
+ }
+ if ($new_data_dir =~ /^\s*$/) {
+ $new_data_dir = "";
+ } else {
+ $new_data_dir =~ s/\/*$//g;
+ $new_data_dir =~ s/$/\//g;
+ }
+ return $new_data_dir;
+}
+
+# Attachment directory
+sub command34 {
+ print "Path to directory used for storing attachments while a mail is\n";
+ print "being sent. There are a few security considerations regarding this\n";
+ print "directory:\n";
+ print " 1. It should have the permission 733 (rwx-wx-wx) to make it\n";
+ print " impossible for a random person with access to the webserver\n";
+ print " to list files in this directory. Confidential data might\n";
+ print " be laying around in there.\n";
+ print " 2. Since the webserver is not able to list the files in the\n";
+ print " content is also impossible for the webserver to delete files\n";
+ print " lying around there for too long.\n";
+ print " 3. It should probably be another directory than the data\n";
+ print " directory specified in option 3.\n";
+ print "\n";
+
+ print "[$WHT$attachment_dir$NRM]: $WHT";
+ $new_attachment_dir = <STDIN>;
+ if ($new_attachment_dir eq "\n") {
+ $new_attachment_dir = $attachment_dir;
+ } else {
+ $new_attachment_dir =~ s/[\r|\n]//g;
+ }
+ if ($new_attachment_dir =~ /^\s*$/) {
+ $new_attachment_dir = "";
+ } else {
+ $new_attachment_dir =~ s/\/*$//g;
+ $new_attachment_dir =~ s/$/\//g;
+ }
+ return $new_attachment_dir;
+}
+
+
+sub command35 {
+ print "This is the default size (in pixels) of the left folder list.\n";
+ print "Default is 200, but you can set it to whatever you wish. This\n";
+ print "is a user preference, so this will only show up as their default.\n";
+ print "\n";
+ print "[$WHT$default_left_size$NRM]: $WHT";
+ $new_default_left_size = <STDIN>;
+ if ($new_default_left_size eq "\n") {
+ $new_default_left_size = $default_left_size;
+ } else {
+ $new_default_left_size =~ s/[\r|\n]//g;
+ }
+ return $new_default_left_size;
+}
+
+
+sub command41 {
+ print "\nNow we will define the themes that you wish to use. If you have added\n";
+ print "a theme of your own, just follow the instructions (?) about how to add\n";
+ print "them. You can also change the default theme.\n";
+ print "[theme] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r|\n]//g;
+ while ($input ne "d") {
+ if ($input =~ /^\s*l\s*/i) {
+ $count = 0;
+ while ($count <= $#theme_name) {
+ if ($count == $theme_default) {
+ print " *";
+ } else {
+ print " ";
+ }
+ $name = $theme_name[$count];
+ $num_spaces = 25 - length($name);
+ for ($i = 0; $i < $num_spaces;$i++) {
+ $name = $name . " ";
+ }
+
+ print " $count. $name";
+ print "($theme_path[$count])\n";
+
+ $count++;
+ }
+ } elsif ($input =~ /^\s*m\s*[0-9]+/i) {
+ $old_def = $theme_default;
+ $theme_default = $input;
+ $theme_default =~ s/^\s*m\s*//;
+ if (($theme_default > $#theme_name) || ($theme_default < 0)) {
+ print "Cannot set default theme to $theme_default. That theme does not exist.\n";
+ $theme_default = $old_def;
+ }
+ } elsif ($input =~ /^\s*\+/) {
+ print "What is the name of this theme: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $theme_name[$#theme_name+1] = $name;
+ print "Be sure to put ../themes/ before the filename.\n";
+ print "What file is this stored in (ex: ../themes/default_theme.php): ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $theme_path[$#theme_path+1] = $name;
+ } elsif ($input =~ /^\s*-\s*[0-9]?/) {
+ if ($input =~ /[0-9]+\s*$/) {
+ $rem_num = $input;
+ $rem_num =~ s/^\s*-\s*//g;
+ $rem_num =~ s/\s*$//;
+ } else {
+ $rem_num = $#theme_name;
+ }
+ if ($rem_num == $theme_default) {
+ print "You cannot remove the default theme!\n";
+ } else {
+ $count = 0;
+ @new_theme_name = ();
+ @new_theme_path = ();
+ while ($count <= $#theme_name) {
+ if ($count != $rem_num) {
+ @new_theme_name = (@new_theme_name, $theme_name[$count]);
+ @new_theme_path = (@new_theme_path, $theme_path[$count]);
+ }
+ $count++;
+ }
+ @theme_name = @new_theme_name;
+ @theme_path = @new_theme_path;
+ if ($theme_default > $rem_num) {
+ $theme_default--;
+ }
+ }
+ } elsif ($input =~ /^\s*t\s*/i) {
+ print "\nStarting detection...\n\n";
+
+ opendir(DIR, "../themes");
+ @files = grep { /\.php$/i } readdir(DIR);
+ $cnt = 0;
+ while ($cnt <= $#files) {
+ $filename = "../themes/" . $files[$cnt];
+ $found = 0;
+ for ($x=0; $x <= $#theme_path; $x++) {
+ if ($theme_path[$x] eq $filename) {
+ $found = 1;
+ }
+ }
+ if ($found != 1) {
+ print "** Found theme: $filename\n";
+ print " What is its name? ";
+ $nm = <STDIN>;
+ $nm =~ s/[\n|\r]//g;
+ $theme_name[$#theme_name+1] = $nm;
+ $theme_path[$#theme_path+1] = $filename;
+ }
+ $cnt++;
+ }
+ print "\n";
+ for ($cnt=0; $cnt <= $#theme_path; $cnt++) {
+ $filename = $theme_path[$cnt];
+ if (! (-e $filename)) {
+ print " Removing $filename (file not found)\n";
+ $offset = 0;
+ @new_theme_name = ();
+ @new_theme_path = ();
+ for ($x=0; $x < $#theme_path; $x++) {
+ if ($theme_path[$x] eq $filename) {
+ $offset = 1;
+ }
+ if ($offset == 1) {
+ $new_theme_name[$x] = $theme_name[$x+1];
+ $new_theme_path[$x] = $theme_path[$x+1];
+ } else {
+ $new_theme_name[$x] = $theme_name[$x];
+ $new_theme_path[$x] = $theme_path[$x];
+ }
+ }
+ @theme_name = @new_theme_name;
+ @theme_path = @new_theme_path;
+ }
+ }
+ print "\nDetection complete!\n\n";
+
+ closedir DIR;
+ } elsif ($input =~ /^\s*\?\s*/) {
+ print ".-------------------------.\n";
+ print "| t (detect themes) |\n";
+ print "| + (add theme) |\n";
+ print "| - N (remove theme) |\n";
+ print "| m N (mark default) |\n";
+ print "| l (list themes) |\n";
+ print "| d (done) |\n";
+ print "`-------------------------'\n";
+ }
+ print "[theme] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r|\n]//g;
+ }
+}
+
+
+sub command61 {
+ print "You can now define different LDAP servers.\n";
+ print "[ldap] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r|\n]//g;
+ while ($input ne "d") {
+ if ($input =~ /^\s*l\s*/i) {
+ $count = 0;
+ while ($count <= $#ldap_host) {
+ print "$count. $ldap_host[$count]\n";
+ print " base: $ldap_base[$count]\n";
+ if ($ldap_charset[$count]) {
+ print " charset: $ldap_charset[$count]\n";
+ }
+ if ($ldap_port[$count]) {
+ print " port: $ldap_port[$count]\n";
+ }
+ if ($ldap_name[$count]) {
+ print " name: $ldap_name[$count]\n";
+ }
+ if ($ldap_maxrows[$count]) {
+ print " maxrows: $ldap_maxrows[$count]\n";
+ }
+ print "\n";
+ $count++;
+ }
+ } elsif ($input =~ /^\s*\+/) {
+ $sub = $#ldap_host + 1;
+
+ print "First, we need to have the hostname or the IP address where\n";
+ print "this LDAP server resides. Example: ldap.bigfoot.com\n";
+ print "hostname: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_host[$sub] = $name;
+
+ print "\n";
+
+ print "Next, we need the server root (base dn). For this, an empty\n";
+ print "string is allowed.\n";
+ print "Example: ou=member_directory,o=netcenter.com\n";
+ print "base: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_base[$sub] = $name;
+
+ print "\n";
+
+ print "This is the TCP/IP port number for the LDAP server. Default\n";
+ print "port is 389. This is optional. Press ENTER for default.\n";
+ print "port: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_port[$sub] = $name;
+
+ print "\n";
+
+ print "This is the charset for the server. Default is utf-8. This\n";
+ print "is also optional. Press ENTER for default.\n";
+ print "charset: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_charset[$sub] = $name;
+
+ print "\n";
+
+ print "This is the name for the server, used to tag the results of\n";
+ print "the search. Default it \"LDAP: hostname\". Press ENTER for default\n";
+ print "name: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_name[$sub] = $name;
+
+ print "\n";
+
+ print "You can specify the maximum number of rows in the search result.\n";
+ print "Default is unlimited. Press ENTER for default.\n";
+ print "maxrows: ";
+ $name = <STDIN>;
+ $name =~ s/[\r|\n]//g;
+ $ldap_maxrows[$sub] = $name;
+
+ print "\n";
+
+ } elsif ($input =~ /^\s*-\s*[0-9]?/) {
+ if ($input =~ /[0-9]+\s*$/) {
+ $rem_num = $input;
+ $rem_num =~ s/^\s*-\s*//g;
+ $rem_num =~ s/\s*$//;
+ } else {
+ $rem_num = $#ldap_host;
+ }
+ $count = 0;
+ @new_ldap_host = ();
+ @new_ldap_base = ();
+ @new_ldap_port = ();
+ @new_ldap_name = ();
+ @new_ldap_charset = ();
+ @new_ldap_maxrows = ();
+ while ($count <= $#ldap_host) {
+ if ($count != $rem_num) {
+ @new_ldap_host = (@new_ldap_host, $ldap_host[$count]);
+ @new_ldap_base = (@new_ldap_base, $ldap_base[$count]);
+ @new_ldap_port = (@new_ldap_port, $ldap_port[$count]);
+ @new_ldap_name = (@new_ldap_name, $ldap_name[$count]);
+ @new_ldap_charset = (@new_ldap_charset, $ldap_charset[$count]);
+ @new_ldap_maxrows = (@new_ldap_maxrows, $ldap_maxrows[$count]);
+ }
+ $count++;
+ }
+ @ldap_host = @new_ldap_host;
+ @ldap_base = @new_ldap_base;
+ @ldap_port = @new_ldap_port;
+ @ldap_name = @new_ldap_name;
+ @ldap_charset = @new_ldap_charset;
+ @ldap_maxrows = @new_ldap_maxrows;
+ } elsif ($input =~ /^\s*\?\s*/) {
+ print ".-------------------------.\n";
+ print "| + (add host) |\n";
+ print "| - N (remove host) |\n";
+ print "| l (list hosts) |\n";
+ print "| d (done) |\n";
+ print "`-------------------------'\n";
+ }
+ print "[ldap] command (?=help) > ";
+ $input = <STDIN>;
+ $input =~ s/[\r|\n]//g;
+ }
+}
+
+sub command62 {
+ print "Some of our developers have come up with very good javascript interface\n";
+ print "for searching through address books, however, our original goals said\n";
+ print "that we would be 100% HTML. In order to make it possible to use their\n";
+ print "interface, and yet stick with our goals, we have also written a plain\n";
+ print "HTML version of the search. Here, you can choose which version to use.\n";
+ print "\n";
+ print "This is just the default value. It is also a user option that each\n";
+ print "user can configure individually\n";
+ print "\n";
+
+ if ($default_use_javascript_addr_book eq "true") {
+ $default_value = "y";
+ } else {
+ $default_use_javascript_addr_book = "false";
+ $default_value = "n";
+ }
+ print "Use javascript version by default (y/n) [$WHT$default_value$NRM]: $WHT";
+ $new_show = <STDIN>;
+ if (($new_show =~ /^y\n/i) || (($new_show =~ /^\n/) && ($default_value eq "y"))) {
+ $default_use_javascript_addr_book = "true";
+ } else {
+ $default_use_javascript_addr_book = "false";
+ }
+ return $default_use_javascript_addr_book;
+}
+
+
+sub save_data {
+ open (FILE, ">config.php");
+
+ print FILE "<?php\n\t/** SquirrelMail configuration\n";
+ print FILE "\t ** Created using the configure script, conf.pl\n\t **/\n\n";
+
+ if ($print_config_version) {
+ print FILE "\t\$config_version = \"$print_config_version\";\n";
+ }
+ print FILE "\t\$config_use_color = $config_use_color;\n";
+ print FILE "\n";
+
+ print FILE "\t\$org_name = \"$org_name\";\n";
+ print FILE "\t\$org_logo = \"$org_logo\";\n";
+ print FILE "\t\$org_title = \"$org_title\";\n";
+
+ print FILE "\n";
+
+ print FILE "\t\$domain = \"$domain\";\n";
+ print FILE "\t\$imapServerAddress = \"$imapServerAddress\";\n";
+ print FILE "\t\$imapPort = $imapPort;\n";
+ print FILE "\t\$useSendmail = $useSendmail;\n";
+ print FILE "\t\$smtpServerAddress = \"$smtpServerAddress\";\n";
+ print FILE "\t\$smtpPort = $smtpPort;\n";
+ print FILE "\t\$sendmailPath = \"$sendmail_path\";\n";
+ print FILE "\t\$imap_server_type = \"$imap_server_type\";\n";
+
+ print FILE "\n";
+
+ print FILE "\t\$default_folder_prefix = \"$default_folder_prefix\";\n";
+ print FILE "\t\$trash_folder = \"$trash_folder\";\n";
+ print FILE "\t\$sent_folder = \"$sent_folder\";\n";
+ print FILE "\t\$default_move_to_trash = $default_move_to_trash;\n";
+ print FILE "\t\$default_move_to_sent = $default_move_to_sent;\n";
+ print FILE "\t\$show_prefix_option = $show_prefix_option;\n";
+ print FILE "\t\$list_special_folders_first = $list_special_folders_first;\n";
+ print FILE "\t\$use_special_folder_color = $use_special_folder_color;\n";
+ print FILE "\t\$auto_expunge = $auto_expunge;\n";
+ print FILE "\t\$default_sub_of_inbox = $default_sub_of_inbox;\n";
+ print FILE "\t\$show_contain_subfolders_option = $show_contain_subfolders_option;\n";
+ print FILE "\t\$default_unseen_notify = $default_unseen_notify;\n";
+ print FILE "\t\$default_unseen_type = $default_unseen_type;\n";
+ print FILE "\n";
+
+ print FILE "\t\$default_charset = \"$default_charset\";\n";
+ print FILE "\t\$data_dir = \"$data_dir\";\n";
+ print FILE "\t\$attachment_dir = \"$attachment_dir\";\n";
+ print FILE "\t\$default_left_size = $default_left_size;\n";
+
+ print FILE "\n";
+
+ for ($ct=0; $ct <= $#plugins; $ct++) {
+ print FILE "\t\$plugins[$ct] = \"$plugins[$ct]\";\n";
+ }
+
+ print FILE "\n";
+
+ for ($count=0; $count <= $#theme_name; $count++) {
+ print FILE "\t\$theme[$count][\"PATH\"] = \"$theme_path[$count]\";\n";
+ print FILE "\t\$theme[$count][\"NAME\"] = \"$theme_name[$count]\";\n";
+ }
+
+ print FILE "\n";
+
+ if ($default_use_javascript_addr_book ne "true") {
+ $default_use_javascript_addr_book = "false";
+ }
+ print FILE "\t\$default_use_javascript_addr_book = $default_use_javascript_addr_book;\n";
+ for ($count=0; $count <= $#ldap_host; $count++) {
+ print FILE "\t\$ldap_server[$count] = Array(\n";
+ print FILE "\t\t\t\"host\" => \"$ldap_host[$count]\",\n";
+ print FILE "\t\t\t\"base\" => \"$ldap_base[$count]\"";
+ if ($ldap_name[$count]) {
+ print FILE ",\n\t\t\t\"name\" => \"$ldap_name[$count]\"";
+ }
+ if ($ldap_port[$count]) {
+ print FILE ",\n\t\t\t\"port\" => \"$ldap_port[$count]\"";
+ }
+ if ($ldap_charset[$count]) {
+ print FILE ",\n\t\t\t\"charset\" => \"$ldap_charset[$count]\"";
+ }
+ if ($ldap_maxrows[$count]) {
+ print FILE ",\n\t\t\t\"maxrows\" => \"$ldap_maxrows[$count]\"";
+ }
+ print FILE ");\n\n";
+ }
+
+ print FILE "\t\$motd = \"$motd\";\n";
+
+ print FILE "?>\n";
+ close FILE;
+}
+
+sub set_defaults {
+ system "clear";
+ print $WHT."SquirrelMail Configuration : ".$NRM;
+ if ($config == 1) { print "Read: config.php"; }
+ elsif ($config == 2) { print "Read: config_default.php"; }
+ print "\n";
+ print "---------------------------------------------------------\n";
+
+ print "While we have been building SquirrelMail, we have discovered some\n";
+ print "preferences that work better with some servers that don't work so\n";
+ print "well with others. If you select your IMAP server, this option will\n";
+ print "set some pre-defined settings for that server.\n";
+ print "\n";
+ print "Please note that you will still need to go through and make sure\n";
+ print "everything is correct. This does not change everything. There are\n";
+ print "only a few settings that this will change.\n";
+ print "\n";
+
+ $continue = 0;
+ while ($continue != 1) {
+ print "Please select your IMAP server:\n";
+ print " cyrus = Cyrus IMAP server\n";
+ print " uw = University of Washington's IMAP server\n";
+ print " exchange = Microsoft Exchange IMAP server\n";
+ print " courier = Courier IMAP server\n";
+ print " quit = Do not change anything\n";
+ print "Command >> ";
+ $server = <STDIN>;
+ $server =~ s/[\r|\n]//g;
+
+ print "\n";
+ if ($server eq "cyrus") {
+ $default_folder_prefix = "INBOX";
+ $trash_folder = "INBOX.Trash";
+ $sent_folder = "INBOX.Sent";
+ $show_prefix_option = false;
+ $default_sub_of_inbox = true;
+ $show_contain_subfolders_option = false;
+ $imap_server_type = "cyrus";
+
+ print " default_folder_prefix = INBOX\n";
+ print " trash_folder = INBOX.Trash\n";
+ print " sent_folder = INBOX.Sent\n";
+ print " show_prefix_option = false\n";
+ print " default_sub_of_inbox = true\n";
+ print "show_contain_subfolders_option = false\n";
+ print " imap_server_type = cyrus\n";
+
+ $continue = 1;
+ } elsif ($server eq "uw") {
+ $default_folder_prefix = "mail/";
+ $trash_folder = "Trash";
+ $sent_folder = "Sent";
+ $show_prefix_option = true;
+ $default_sub_of_inbox = false;
+ $show_contain_subfolders_option = true;
+ $imap_server_type = "uw";
+
+ print " default_folder_prefix = mail/\n";
+ print " trash_folder = Trash\n";
+ print " sent_folder = Sent\n";
+ print " show_prefix_option = true\n";
+ print " default_sub_of_inbox = false\n";
+ print "show_contain_subfolders_option = true\n";
+ print " imap_server_type = uw\n";
+
+ $continue = 1;
+ } elsif ($server eq "exchange") {
+ $default_folder_prefix = "INBOX/";
+ $default_sub_of_inbox = true;
+ $trash_folder = "INBOX/Deleted Items";
+ $sent_folder = "INBOX/Sent Items";
+ $show_prefix_option = false;
+ $show_contain_subfolders_option = false;
+ $imap_server_type = "exchange";
+
+ print " default_folder_prefix = INBOX/\n";
+ print " default_sub_of_inbox = true\n";
+ print " trash_folder = \"INBOX/Deleted Items\"\n";
+ print " sent_folder = \"INBOX/Sent Items\"\n";
+ print " show_prefix_option = false\n";
+ print " show_contain_subfolders_option = false\n";
+ print " imap_server_type = exchange\n";
+
+ $continue = 1;
+ } elsif ($server eq "courier") {
+ $imap_server_type = "courier";
+
+ print " imap_server_type = courier\n";
+
+ $continue = 1;
+ } elsif ($server eq "quit") {
+ $continue = 1;
+ } else {
+ print "Unrecognized server: $server\n";
+ print "\n";
+ }
+ }
+ print "\nPress any key to continue...";
+ $tmp = <STDIN>;
}
projects / squirrelmail.git / blobdiff