entities[] = $msg; } } /* --------------------------------------------------------------------------------- */ /* MIME DECODING */ /* --------------------------------------------------------------------------------- */ /* This function gets the structure of a message and stores it in the "message" class. * It will return this object for use with all relevant header information and * fully parsed into the standard "message" object format. */ function mime_structure ($imap_stream, $header) { sqimap_messages_flag ($imap_stream, $header->id, $header->id, 'Seen'); $ssid = sqimap_session_id(); $lsid = strlen( $ssid ); $id = $header->id; fputs ($imap_stream, "$ssid FETCH $id BODYSTRUCTURE\r\n"); // // This should use sqimap_read_data instead of reading it itself // $read = fgets ($imap_stream, 10000); $bodystructure = ''; while ( substr($read, 0, $lsid) <> $ssid && !feof( $imap_stream ) ) { $bodystructure .= $read; $read = fgets ($imap_stream, 10000); } $read = $bodystructure; // isolate the body structure and remove beginning and end parenthesis $read = trim(substr ($read, strpos(strtolower($read), 'bodystructure') + 13)); $read = trim(substr ($read, 0, -1)); $end = mime_match_parenthesis(0, $read); while ($end == strlen($read)-1) { $read = trim(substr ($read, 0, -1)); $read = trim(substr ($read, 1)); $end = mime_match_parenthesis(0, $read); } $msg = mime_parse_structure ($read, 0); $msg->header = $header; return( $msg ); } /* this starts the parsing of a particular structure. It is called recursively, * so it can be passed different structures. It returns an object of type * $message. * First, it checks to see if it is a multipart message. If it is, then it * handles that as it sees is necessary. If it is just a regular entity, * then it parses it and adds the necessary header information (by calling out * to mime_get_elements() */ function mime_parse_structure ($structure, $ent_id) { $msg = new message(); if ($structure{0} == '(') { $ent_id = mime_new_element_level($ent_id); $start = $end = -1; do { $start = $end+1; $end = mime_match_parenthesis ($start, $structure); $element = substr($structure, $start+1, ($end - $start)-1); $ent_id = mime_increment_id ($ent_id); $newmsg = mime_parse_structure ($element, $ent_id); $msg->addEntity ($newmsg); } while ($structure{$end+1} == '('); } else { // parse the elements $msg = mime_get_element ($structure, $msg, $ent_id); } return $msg; } /* Increments the element ID. An element id can look like any of * the following: 1, 1.2, 4.3.2.4.1, etc. This function increments * the last number of the element id, changing 1.2 to 1.3. */ function mime_increment_id ($id) { if (strpos($id, ".")) { $first = substr($id, 0, strrpos($id, ".")); $last = substr($id, strrpos($id, ".")+1); $last++; $new = $first . "." .$last; } else { $new = $id + 1; } return $new; } /* * See comment for mime_increment_id(). * This adds another level on to the entity_id changing 1.3 to 1.3.0 * NOTE: 1.3.0 is not a valid element ID. It MUST be incremented * before it can be used. I left it this way so as not to have * to make a special case if it is the first entity_id. It * always increments it, and that works fine. */ function mime_new_element_level ($id) { if (!$id) { $id = 0; } else { $id = $id . '.0'; } return( $id ); } function mime_get_element (&$structure, $msg, $ent_id) { $elem_num = 1; $msg->header = new msg_header(); $msg->header->entity_id = $ent_id; $properties = array(); while (strlen($structure) > 0) { $structure = trim($structure); $char = $structure{0}; if (strtolower(substr($structure, 0, 3)) == 'nil') { $text = ''; $structure = substr($structure, 3); } else if ($char == '"') { // loop through until we find the matching quote, and return that as a string $pos = 1; $text = ''; while ( ($char = $structure{$pos} ) <> '"' && $pos < strlen($structure)) { $text .= $char; $pos++; } $structure = substr($structure, strlen($text) + 2); } else if ($char == '(') { // comment me $end = mime_match_parenthesis (0, $structure); $sub = substr($structure, 1, $end-1); $properties = mime_get_props($properties, $sub); $structure = substr($structure, strlen($sub) + 2); } else { // loop through until we find a space or an end parenthesis $pos = 0; $char = $structure{$pos}; $text = ''; while ($char != ' ' && $char != ')' && $pos < strlen($structure)) { $text .= $char; $pos++; $char = $structure{$pos}; } $structure = substr($structure, strlen($text)); } // This is where all the text parts get put into the header switch ($elem_num) { case 1: $msg->header->type0 = strtolower($text); break; case 2: $msg->header->type1 = strtolower($text); break; case 4: // Id // Invisimail enclose images with <> $msg->header->id = str_replace( '<', '', str_replace( '>', '', $text ) ); break; case 5: $msg->header->description = $text; break; case 6: $msg->header->encoding = strtolower($text); break; case 7: $msg->header->size = $text; break; default: if ($msg->header->type0 == 'text' && $elem_num == 8) { // This is a plain text message, so lets get the number of lines // that it contains. $msg->header->num_lines = $text; } else if ($msg->header->type0 == 'message' && $msg->header->type1 == 'rfc822' && $elem_num == 8) { // This is an encapsulated message, so lets start all over again and // parse this message adding it on to the existing one. $structure = trim($structure); if ( $structure{0} == '(' ) { $e = mime_match_parenthesis (0, $structure); $structure = substr($structure, 0, $e); $structure = substr($structure, 1); $m = mime_parse_structure($structure, $msg->header->entity_id); // the following conditional is there to correct a bug that wasn't // incrementing the entity IDs correctly because of the special case // that message/rfc822 is. This fixes it fine. if (substr($structure, 1, 1) != '(') $m->header->entity_id = mime_increment_id(mime_new_element_level($ent_id)); // Now we'll go through and reformat the results. if ($m->entities) { for ($i=0; $i < count($m->entities); $i++) { $msg->addEntity($m->entities[$i]); } } else { $msg->addEntity($m); } $structure = ""; } } break; } $elem_num++; $text = ""; } // loop through the additional properties and put those in the various headers if ($msg->header->type0 != 'message') { for ($i=0; $i < count($properties); $i++) { $msg->header->{$properties[$i]['name']} = $properties[$i]['value']; } } return $msg; } /* * I did most of the MIME stuff yesterday (June 20, 2000), but I couldn't * figure out how to do this part, so I decided to go to bed. I woke up * in the morning and had a flash of insight. I went to the white-board * and scribbled it out, then spent a bit programming it, and this is the * result. Nothing complicated, but I think my brain was fried yesterday. * Funny how that happens some times. * * This gets properties in a nested parenthesisized list. For example, * this would get passed something like: ("attachment" ("filename" "luke.tar.gz")) * This returns an array called $props with all paired up properties. * It ignores the "attachment" for now, maybe that should change later * down the road. In this case, what is returned is: * $props[0]["name"] = "filename"; * $props[0]["value"] = "luke.tar.gz"; */ function mime_get_props ($props, $structure) { while (strlen($structure) > 0) { $structure = trim($structure); $char = $structure{0}; if ($char == '"') { $pos = 1; $tmp = ''; while ( ( $char = $structure{$pos} ) != '"' && $pos < strlen($structure)) { $tmp .= $char; $pos++; } $structure = trim(substr($structure, strlen($tmp) + 2)); $char = $structure{0}; if ($char == '"') { $pos = 1; $value = ''; while ( ( $char = $structure{$pos} ) != '"' && $pos < strlen($structure) ) { $value .= $char; $pos++; } $structure = trim(substr($structure, strlen($tmp) + 2)); $k = count($props); $props[$k]['name'] = strtolower($tmp); $props[$k]['value'] = $value; } else if ($char == '(') { $end = mime_match_parenthesis (0, $structure); $sub = substr($structure, 1, $end-1); if (! isset($props)) $props = array(); $props = mime_get_props($props, $sub); $structure = substr($structure, strlen($sub) + 2); } return $props; } else if ($char == '(') { $end = mime_match_parenthesis (0, $structure); $sub = substr($structure, 1, $end-1); $props = mime_get_props($props, $sub); $structure = substr($structure, strlen($sub) + 2); return $props; } else { return $props; } } } /* * Matches parenthesis. It will return the position of the matching * parenthesis in $structure. For instance, if $structure was: * ("text" "plain" ("val1name", "1") nil ... ) * x x * then this would return 42 to match up those two. */ function mime_match_parenthesis ($pos, $structure) { $j = strlen( $structure ); // ignore all extra characters // If inside of a string, skip string -- Boundary IDs and other // things can have ) in them. if ( $structure{$pos} != '(' ) { return( $j ); } while ( $pos < $j ) { $pos++; if ($structure{$pos} == ')') { return $pos; } elseif ($structure{$pos} == '"') { $pos++; while ( $structure{$pos} != '"' && $pos < $j ) { if (substr($structure, $pos, 2) == '\\"') { $pos++; } elseif (substr($structure, $pos, 2) == '\\\\') { $pos++; } $pos++; } } elseif ( $structure{$pos} == '(' ) { $pos = mime_match_parenthesis ($pos, $structure); } } echo _("Error decoding mime structure. Report this as a bug!") . '
'; return( $pos ); } function mime_fetch_body ($imap_stream, $id, $ent_id ) { // do a bit of error correction. If we couldn't find the entity id, just guess // that it is the first one. That is usually the case anyway. if (!$ent_id) $ent_id = 1; $data = sqimap_run_command ($imap_stream, "FETCH $id BODY[$ent_id]", true, $response, $message); $topline = array_shift($data); while (! ereg('\\* [0-9]+ FETCH ', $topline) && $data) $topline = array_shift($data); $wholemessage = implode('', $data); if (ereg('\\{([^\\}]*)\\}', $topline, $regs)) { $ret = substr( $wholemessage, 0, $regs[1] ); /* There is some information in the content info header that could be important in order to parse html messages. Let's get them here. */ if ( $ret{0} == '<' ) { $data = sqimap_run_command ($imap_stream, "FETCH $id BODY[$ent_id.MIME]", true, $response, $message); $base = ''; $k = 10; foreach( $data as $d ) { if ( substr( $d, 0, 13 ) == 'Content-Base:' ) { $j = strlen( $d ); $i = 13; $base = ''; while ( $i < $j && ( !isNoSep( $d{$i} ) || $d{$i} == '"' ) ) $i++; while ( $i < $j ) { if ( isNoSep( $d{$i} ) ) $base .= $d{$i}; $i++; } $k = 0; } elseif ( $k == 1 && !isnosep( $d{0} ) ) { $base .= substr( $d, 1 ); } $k++; } if ( $base <> '' ) $ret = "" . $ret; } } else if (ereg('"([^"]*)"', $topline, $regs)) { $ret = $regs[1]; } else { global $where, $what, $mailbox, $passed_id, $startMessage; $par = "mailbox=".urlencode($mailbox)."&passed_id=$passed_id"; if (isset($where) && isset($what)) { $par .= "&where=".urlencode($where)."&what=".urlencode($what); } else { $par .= "&startMessage=$startMessage&show_more=0"; } $par .= '&response='.urlencode($response).'&message='.urlencode($message). '&topline='.urlencode($topline); echo '' . _("Body retrieval error. The reason for this is most probably that the message is malformed. Please help us making future versions better by submitting this message to the developers knowledgebase!") . "Submit message
" . '' . _("Response:") . "$response
" . _("Message:") . " $message
" . _("FETCH line:") . " $topline
"; $data = sqimap_run_command ($imap_stream, "FETCH $passed_id BODY[]", true, $response, $message); array_shift($data); $wholemessage = implode('', $data); $ret = "---------------\n$wholemessage"; } return( $ret ); } function mime_print_body_lines ($imap_stream, $id, $ent_id, $encoding) { // do a bit of error correction. If we couldn't find the entity id, just guess // that it is the first one. That is usually the case anyway. if (!$ent_id) { $ent_id = 1; } $sid = sqimap_session_id(); // Don't kill the connection if the browser is over a dialup // and it would take over 30 seconds to download it. // donīt call set_time_limit in safe mode. if (!ini_get("safe_mode")) { set_time_limit(0); } fputs ($imap_stream, "$sid FETCH $id BODY[$ent_id]\r\n"); $cnt = 0; $continue = true; $read = fgets ($imap_stream,4096); // This could be bad -- if the section has sqimap_session_id() . ' OK' // or similar, it will kill the download. while (!ereg("^".$sid." (OK|BAD|NO)(.*)$", $read, $regs)) { if (trim($read) == ')==') { $read1 = $read; $read = fgets ($imap_stream,4096); if (ereg("^".$sid." (OK|BAD|NO)(.*)$", $read, $regs)) { return; } else { echo decodeBody($read1, $encoding) . decodeBody($read, $encoding); } } else if ($cnt) { echo decodeBody($read, $encoding); } $read = fgets ($imap_stream,4096); $cnt++; } } /* -[ END MIME DECODING ]----------------------------------------------------------- */ /* This is the first function called. It decides if this is a multipart message or if it should be handled as a single entity */ function decodeMime ($imap_stream, &$header) { global $username, $key, $imapServerAddress, $imapPort; return mime_structure ($imap_stream, $header); } // This is here for debugging purposese. It will print out a list // of all the entity IDs that are in the $message object. /* function listEntities ($message) { if ($message) { if ($message->header->entity_id) echo "" . $message->header->entity_id . ' : ' . $message->header->type0 . '/' . $message->header->type1 . '
'; for ($i = 0; $message->entities[$i]; $i++) { $msg = listEntities($message->entities[$i], $ent_id); if ($msg) return $msg; } } } */ /* returns a $message object for a particular entity id */ function getEntity ($message, $ent_id) { if ($message) { if ($message->header->entity_id == $ent_id && strlen($ent_id) == strlen($message->header->entity_id)) { return $message; } else { for ($i = 0; isset($message->entities[$i]); $i++) { $msg = getEntity ($message->entities[$i], $ent_id); if ($msg) { return $msg; } } } } } /* * figures out what entity to display and returns the $message object * for that entity. */ function findDisplayEntity ($message, $textOnly = 1) { global $show_html_default; $entity = 0; if ($message) { if ( $message->header->type0 == 'multipart' && ( $message->header->type1 == 'alternative' || $message->header->type1 == 'related' ) && $show_html_default && ! $textOnly ) { $entity = findDisplayEntityHTML($message); } // Show text/plain or text/html -- the first one we find. if ( $entity == 0 && $message->header->type0 == 'text' && ( $message->header->type1 == 'plain' || $message->header->type1 == 'html' ) && isset($message->header->entity_id) ) { $entity = $message->header->entity_id; } $i = 0; while ($entity == 0 && isset($message->entities[$i]) ) { $entity = findDisplayEntity($message->entities[$i], $textOnly); $i++; } } return( $entity ); } /* Shows the HTML version */ function findDisplayEntityHTML ($message) { if ( $message->header->type0 == 'text' && $message->header->type1 == 'html' && isset($message->header->entity_id)) { return $message->header->entity_id; } for ($i = 0; isset($message->entities[$i]); $i ++) { $entity = findDisplayEntityHTML($message->entities[$i]); if ($entity != 0) { return $entity; } } return 0; } /* This returns a parsed string called $body. That string can then be displayed as the actual message in the HTML. It contains everything needed, including HTML Tags, Attachments at the bottom, etc. */ function formatBody($imap_stream, $message, $color, $wrap_at) { // this if statement checks for the entity to show as the // primary message. To add more of them, just put them in the // order that is their priority. global $startMessage, $username, $key, $imapServerAddress, $imapPort, $show_html_default; $id = $message->header->id; $urlmailbox = urlencode($message->header->mailbox); // Get the right entity and redefine message to be this entity // Pass the 0 to mean that we want the 'best' viewable one $ent_num = findDisplayEntity ($message, 0); $body_message = getEntity($message, $ent_num); if (($body_message->header->type0 == 'text') || ($body_message->header->type0 == 'rfc822')) { $body = mime_fetch_body ($imap_stream, $id, $ent_num); $body = decodeBody($body, $body_message->header->encoding); $hookResults = do_hook("message_body", $body); $body = $hookResults[1]; // If there are other types that shouldn't be formatted, add // them here if ($body_message->header->type1 == 'html') { if ( $show_html_default <> 1 ) { $body = strip_tags( $body ); translateText($body, $wrap_at, $body_message->header->charset); } else { $body = MagicHTML( $body, $id ); } } else { translateText($body, $wrap_at, $body_message->header->charset); } $body .= "
". _("Download this as a file") ."

"; /** Display the ATTACHMENTS: message if there's more than one part **/ $body .= ""; if (isset($message->entities[0])) { $body .= formatAttachments ($message, $ent_num, $message->header->mailbox, $id); } $body .= ""; } else { $body = formatAttachments ($message, -1, $message->header->mailbox, $id); } return ($body); } /* * A recursive function that returns a list of attachments with links * to where to download these attachments */ function formatAttachments ($message, $ent_id, $mailbox, $id) { global $where, $what; global $startMessage, $color; static $ShownHTML = 0; $body = ""; if ($ShownHTML == 0) { $ShownHTML = 1; $body .= "\n" . "
\n" . _("Attachments") . ':' . "
\n" . "\n" . formatAttachments ($message, $ent_id, $mailbox, $id) . "
"; return( $body ); } if ($message) { if (!$message->entities) { $type0 = strtolower($message->header->type0); $type1 = strtolower($message->header->type1); $name = decodeHeader($message->header->name); if ($message->header->entity_id != $ent_id) { $filename = decodeHeader($message->header->filename); if (trim($filename) == '') { if (trim($name) == '') { if ( trim( $message->header->id ) == '' ) $display_filename = 'untitled-[' . $message->header->entity_id . ']' ; else $display_filename = 'cid: ' . $message->header->id; // $display_filename = 'untitled-[' . $message->header->entity_id . ']' ; } else { $display_filename = $name; $filename = $name; } } else { $display_filename = $filename; } $urlMailbox = urlencode($mailbox); $ent = urlencode($message->header->entity_id); $DefaultLink = "../src/download.php?startMessage=$startMessage&passed_id=$id&mailbox=$urlMailbox&passed_ent_id=$ent"; if ($where && $what) $DefaultLink .= '&where=' . urlencode($where) . '&what=' . urlencode($what); $Links['download link']['text'] = _("download"); $Links['download link']['href'] = "../src/download.php?absolute_dl=true&passed_id=$id&mailbox=$urlMailbox&passed_ent_id=$ent"; $ImageURL = ''; /* this executes the attachment hook with a specific MIME-type. * if that doens't have results, it tries if there's a rule * for a more generic type. */ $HookResults = do_hook("attachment $type0/$type1", $Links, $startMessage, $id, $urlMailbox, $ent, $DefaultLink, $display_filename, $where, $what); if(count($HookResults[1]) <= 1) { $HookResults = do_hook("attachment $type0/*", $Links, $startMessage, $id, $urlMailbox, $ent, $DefaultLink, $display_filename, $where, $what); } $Links = $HookResults[1]; $DefaultLink = $HookResults[6]; $body .= '  ' . "$display_filename " . '' . show_readable_size($message->header->size) . '  ' . "[ $type0/$type1 ] " . ''; if ($message->header->description) $body .= '' . htmlspecialchars($message->header->description) . ''; $body .= ' '; $SkipSpaces = 1; foreach ($Links as $Val) { if ($SkipSpaces) { $SkipSpaces = 0; } else { $body .= '  |  '; } $body .= '' . $Val['text'] . ''; } unset($Links); $body .= "\n"; } } else { for ($i = 0; $i < count($message->entities); $i++) { $body .= formatAttachments ($message->entities[$i], $ent_id, $mailbox, $id); } } return( $body ); } } /** this function decodes the body depending on the encoding type. **/ function decodeBody($body, $encoding) { $body = str_replace("\r\n", "\n", $body); $encoding = strtolower($encoding); global $show_html_default; if ($encoding == 'quoted-printable') { $body = quoted_printable_decode($body); while (ereg("=\n", $body)) $body = ereg_replace ("=\n", "", $body); } else if ($encoding == 'base64') { $body = base64_decode($body); } // All other encodings are returned raw. return $body; } /* * This functions decode strings that is encoded according to * RFC1522 (MIME Part Two: Message Header Extensions for Non-ASCII Text). */ function decodeHeader ($string, $utfencode=true) { if ( is_array( $string ) ) { $string = implode("\n", $string ); } if (eregi('=\\?([^?]+)\\?(q|b)\\?([^?]+)\\?=', $string, $res)) { if (ucfirst($res[2]) == 'B') { $replace = base64_decode($res[3]); } else { $replace = str_replace('_', ' ', $res[3]); // Convert lowercase Quoted Printable to uppercase for // quoted_printable_decode to understand it. while (ereg("(=(([0-9][abcdef])|([abcdef][0-9])|([abcdef][abcdef])))", $replace, $res)) { $replace = str_replace($res[1], strtoupper($res[1]), $replace); } $replace = quoted_printable_decode($replace); } /* Only encode into entities by default. Some places don't need the encoding, like the compose form. */ if ($utfencode){ $replace = charset_decode ($res[1], $replace); } // Remove the name of the character set. $string = eregi_replace ('=\\?([^?]+)\\?(q|b)\\?([^?]+)\\?=', $replace, $string); // In case there should be more encoding in the string: recurse $string = decodeHeader($string); } return ($string); } /* * Encode a string according to RFC 1522 for use in headers if it * contains 8-bit characters or anything that looks like it should * be encoded. */ function encodeHeader ($string) { global $default_charset; // Encode only if the string contains 8-bit characters or =? $j = strlen( $string ); $l = strstr($string, '=?'); // Must be encoded ? $ret = ''; for( $i=0; $i < $j; ++$i) { switch( $string{$i} ) { case '=': $ret .= '=3D'; break; case '?': $ret .= '=3F'; break; case '_': $ret .= '=5F'; break; case ' ': $ret .= '_'; break; default: $k = ord( $string{$i} ); if ( $k > 126 ) { $ret .= sprintf("=%02X", $k); $l = TRUE; } else $ret .= $string{$i}; } } if ( $l ) { $string = "=?$default_charset?Q?$ret?="; } return( $string ); } /* Strips dangerous tags from html messages. */ function MagicHTML( $body, $id ) { global $message, $HTTP_SERVER_VARS, $attachment_common_show_images; $attachment_common_show_images = FALSE; // Don't display attached images in HTML mode $j = strlen( $body ); // Legnth of the HTML $ret = ''; // Returned string $bgcolor = '#ffffff'; // Background style color (defaults to white) $textcolor = '#000000'; // Foreground style color (defaults to black) $leftmargin = ''; // Left margin style $title = ''; // HTML title if any $i = 0; while ( $i < $j ) { if ( $body{$i} == '<' ) { $pos = $i + 1; $tag = ''; while ($body{$pos} == ' ' || $body{$pos} == "\t" || $body{$pos} == "\n") { $pos ++; } while (strlen($tag) < 4 && $body{$pos} != ' ' && $body{$pos} != "\t" && $body{$pos} != "\n") { $tag .= $body{$pos}; $pos ++; } switch( strtoupper( $tag ) ) { // Strips the entire tag and contents case 'APPL': case 'EMBB': case 'FRAM': case 'SCRI': case 'OBJE': $etg = '/' . $tag; while ( $body{$i+1}.$body{$i+2}.$body{$i+3}.$body{$i+4}.$body{$i+5} <> $etg && $i < $j ) $i++; while ( $i < $j && $body{++$i} <> '>' ); // $ret .= ""; break; // Substitute Title case 'TITL': $i += 5; while ( $body{$i} <> '>' && // $i < $j ) $i++; $i++; $title = ''; while ( $body{$i} <> '<' && // $i < $j ) { $title .= $body{$i}; $i++; } $i += 7; break; // Destroy these tags case 'HTML': case 'HEAD': case '/HTM': case '/HEA': case '!DOC': case 'META': //case 'DIV ': //case '/DIV': case '!-- ': $i += 4; while ( $body{$i} <> '>' && $i < $j ) $i++; // $i++; break; case 'STYL': $i += 5; while ( $body{$i} <> '>' && // $i < $j ) $i++; $i++; // We parse the style to look for interesting stuff $styleblk = ''; while ( $body{$i} <> '>' && $i < $j ) { // First we get the name of the style $style = ''; while ( $body{$i} <> '>' && $body{$i} <> '<' && $body{$i} <> '{' && $i < $j ) { if ( isnoSep( $body{$i} ) ) $style .= $body{$i}; $i++; } stripComments( $i, $j, $body ); $style = strtoupper( trim( $style ) ); if ( $style == 'BODY' ) { // Next we look into the definitions of the body style while ( $body{$i} <> '>' && $body{$i} <> '}' && $i < $j ) { // We look for the background color if any. if ( substr( $body, $i, 17 ) == 'BACKGROUND-COLOR:' ) { $i += 17; $bgcolor = getStyleData( $i, $j, $body ); } elseif ( substr( $body, $i, 12 ) == 'MARGIN-LEFT:' ) { $i += 12; $leftmargin = getStyleData( $i, $j, $body ); } $i++; } } else { // Other style are mantained $styleblk .= "$style "; while ( $body{$i} <> '>' && $body{$i} <> '<' && $body{$i} <> '}' && $i < $j ) { $styleblk .= $body{$i}; $i++; } $styleblk .= $body{$i}; } stripComments( $i, $j, $body ); if ( $body{$i} <> '>' ) $i++; } if ( $styleblk <> '' ) $ret .= "