moved smtp sitewide configuration to main configuration utility
[squirrelmail.git] / config / conf.pl
1 #!/usr/bin/env perl
2 # conf.pl
3 #
4 # Copyright (c) 1999-2006 The SquirrelMail Project Team
5 # Licensed under the GNU GPL. For full terms see COPYING.
6 #
7 # A simple configure script to configure SquirrelMail
8 #
9 # $Id$
10 ############################################################
11 $conf_pl_version = "1.4.0";
12
13 ############################################################
14 # Check what directory we're supposed to be running in, and
15 # change there if necessary. File::Basename has been in
16 # Perl since at least 5.003_7, and nobody sane runs anything
17 # before that, but just in case.
18 ############################################################
19 my $dir;
20 if ( eval q{require "File/Basename.pm"} ) {
21 $dir = File::Basename::dirname($0);
22 chdir($dir);
23 }
24
25 ############################################################
26 # Some people try to run this as a CGI. That's wrong!
27 ############################################################
28 if ( defined( $ENV{'PATH_INFO'} )
29 || defined( $ENV{'QUERY_STRING'} )
30 || defined( $ENV{'REQUEST_METHOD'} ) ) {
31 print "Content-Type: text/html\n\n";
32 print "You must run this script from the command line.";
33 exit;
34 }
35
36 ############################################################
37 # If we got here, use Cwd to get the full directory path
38 # (the Basename stuff above will sometimes return '.' as
39 # the base directory, which is not helpful here).
40 ############################################################
41 use Cwd;
42 $dir = cwd();
43
44
45 ############################################################
46 # First, lets read in the data already in there...
47 ############################################################
48 if ( -e "config.php" ) {
49 open( FILE, "config.php" );
50 while ( $line = <FILE> ) {
51 $line =~ s/^\s+//;
52 $line =~ s/^\$//;
53 $var = $line;
54
55 $var =~ s/=/EQUALS/;
56 if ( $var =~ /^([a-z])/i ) {
57 @o = split ( /\s*EQUALS\s*/, $var );
58 if ( $o[0] eq "config_version" ) {
59 $o[1] =~ s/[\n\r]//g;
60 $o[1] =~ s/[\'\"];\s*$//;
61 $o[1] =~ s/;$//;
62 $o[1] =~ s/^[\'\"]//;
63
64 $config_version = $o[1];
65 close(FILE);
66 }
67 }
68 }
69 close(FILE);
70
71 if ( $config_version ne $conf_pl_version ) {
72 clear_screen();
73 print $WHT. "WARNING:\n" . $NRM;
74 print " The file \"config/config.php\" was found, but it is for\n";
75 print " an older version of SquirrelMail. It is possible to still\n";
76 print " read the defaults from this file but be warned that many\n";
77 print " preferences change between versions. It is recommended that\n";
78 print " you start with a clean config.php for each upgrade that you\n";
79 print " do. To do this, just move config/config.php out of the way.\n";
80 print "\n";
81 print "Continue loading with the old config.php [y/N]? ";
82 $ctu = <STDIN>;
83
84 if ( ( $ctu !~ /^y\n/i ) || ( $ctu =~ /^\n/ ) ) {
85 exit;
86 }
87
88 print "\nDo you want me to stop warning you [y/N]? ";
89 $ctu = <STDIN>;
90 if ( $ctu =~ /^y\n/i ) {
91 $print_config_version = $conf_pl_version;
92 } else {
93 $print_config_version = $config_version;
94 }
95 } else {
96 $print_config_version = $config_version;
97 }
98
99 $config = 1;
100 open( FILE, "config.php" );
101 } elsif ( -e "config_default.php" ) {
102 open( FILE, "config_default.php" );
103 while ( $line = <FILE> ) {
104 $line =~ s/^\s+//;
105 $line =~ s/^\$//;
106 $var = $line;
107
108 $var =~ s/=/EQUALS/;
109 if ( $var =~ /^([a-z])/i ) {
110 @o = split ( /\s*EQUALS\s*/, $var );
111 if ( $o[0] eq "config_version" ) {
112 $o[1] =~ s/[\n\r]//g;
113 $o[1] =~ s/[\'\"];\s*$//;
114 $o[1] =~ s/;$//;
115 $o[1] =~ s/^[\'\"]//;
116
117 $config_version = $o[1];
118 close(FILE);
119 }
120 }
121 }
122 close(FILE);
123
124 if ( $config_version ne $conf_pl_version ) {
125 clear_screen();
126 print $WHT. "WARNING:\n" . $NRM;
127 print " You are trying to use a 'config_default.php' from an older\n";
128 print " version of SquirrelMail. This is HIGHLY unrecommended. You\n";
129 print " should get the 'config_default.php' that matches the version\n";
130 print " of SquirrelMail that you are running. You can get this from\n";
131 print " the SquirrelMail web page by going to the following URL:\n";
132 print " http://www.squirrelmail.org.\n";
133 print "\n";
134 print "Continue loading with old config_default.php (a bad idea) [y/N]? ";
135 $ctu = <STDIN>;
136
137 if ( ( $ctu !~ /^y\n/i ) || ( $ctu =~ /^\n/ ) ) {
138 exit;
139 }
140
141 print "\nDo you want me to stop warning you [y/N]? ";
142 $ctu = <STDIN>;
143 if ( $ctu =~ /^y\n/i ) {
144 $print_config_version = $conf_pl_version;
145 } else {
146 $print_config_version = $config_version;
147 }
148 } else {
149 $print_config_version = $config_version;
150 }
151 $config = 2;
152 open( FILE, "config_default.php" );
153 } else {
154 print "No configuration file found. Please get config_default.php\n";
155 print "or config.php before running this again. This program needs\n";
156 print "a default config file to get default values.\n";
157 exit;
158 }
159
160 # Read and parse the current configuration file
161 # (either config.php or config_default.php).
162 while ( $line = <FILE> ) {
163 $line =~ s/^\s+//;
164 $line =~ s/^\$//;
165 $var = $line;
166
167 $var =~ s/=/EQUALS/;
168 if ( $var =~ /^([a-z])/i ) {
169 @options = split ( /\s*EQUALS\s*/, $var );
170 $options[1] =~ s/[\n\r]//g;
171 $options[1] =~ s/[\'\"];\s*$//;
172 $options[1] =~ s/;$//;
173 $options[1] =~ s/^[\'\"]//;
174 # de-escape escaped strings
175 $options[1] =~ s/\\'/'/g;
176 $options[1] =~ s/\\\\/\\/g;
177
178 if ( $options[0] =~ /^theme\[[0-9]+\]\[['"]PATH['"]\]/ ) {
179 $sub = $options[0];
180 $sub =~ s/\]\[['"]PATH['"]\]//;
181 $sub =~ s/.*\[//;
182 if ( -e "../themes" ) {
183 $options[1] =~ s/^\.\.\/config/\.\.\/themes/;
184 }
185 $theme_path[$sub] = &change_to_rel_path($options[1]);
186 } elsif ( $options[0] =~ /^theme\[[0-9]+\]\[['"]NAME['"]\]/ ) {
187 $sub = $options[0];
188 $sub =~ s/\]\[['"]NAME['"]\]//;
189 $sub =~ s/.*\[//;
190 $theme_name[$sub] = $options[1];
191 } elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]PATH['"]\]/ ) {
192 $sub = $options[0];
193 $sub =~ s/\]\[['"]PATH['"]\]//;
194 $sub =~ s/.*\[//;
195 if ( -e "../templates" ) {
196 $options[1] =~ s/^\.\.\/config/\.\.\/templates/;
197 }
198 $templateset_path[$sub] = &change_to_rel_path($options[1]);
199 } elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]NAME['"]\]/ ) {
200 $sub = $options[0];
201 $sub =~ s/\]\[['"]NAME['"]\]//;
202 $sub =~ s/.*\[//;
203 $templateset_name[$sub] = $options[1];
204 } elsif ( $options[0] =~ /^plugins\[[0-9]*\]/ ) {
205 $sub = $options[0];
206 $sub =~ s/\]//;
207 $sub =~ s/^plugins\[//;
208 if ($sub eq '') {
209 push @plugins, $options[1];
210 } else {
211 $plugins[$sub] = $options[1];
212 }
213 } elsif ($options[0] =~ /^fontsets\[\'[a-z]*\'\]/) {
214 # parse associative $fontsets array
215 $sub = $options[0];
216 $sub =~ s/\'\]//;
217 $sub =~ s/^fontsets\[\'//;
218 $fontsets{$sub} = $options[1];
219 } elsif ( $options[0] =~ /^ldap_server\[[0-9]+\]/ ) {
220 $sub = $options[0];
221 $sub =~ s/\]//;
222 $sub =~ s/^ldap_server\[//;
223 $continue = 0;
224 while ( ( $tmp = <FILE> ) && ( $continue != 1 ) ) {
225 if ( $tmp =~ /\);\s*$/ ) {
226 $continue = 1;
227 }
228
229 if ( $tmp =~ /^\s*[\'\"]host[\'\"]/i ) {
230 $tmp =~ s/^\s*[\'\"]host[\'\"]\s*=>\s*[\'\"]//i;
231 $tmp =~ s/[\'\"],?\s*$//;
232 $tmp =~ s/[\'\"]\);\s*$//;
233 $host = $tmp;
234 } elsif ( $tmp =~ /^\s*[\'\"]base[\'\"]/i ) {
235 $tmp =~ s/^\s*[\'\"]base[\'\"]\s*=>\s*[\'\"]//i;
236 $tmp =~ s/[\'\"],?\s*$//;
237 $tmp =~ s/[\'\"]\);\s*$//;
238 $base = $tmp;
239 } elsif ( $tmp =~ /^\s*[\'\"]charset[\'\"]/i ) {
240 $tmp =~ s/^\s*[\'\"]charset[\'\"]\s*=>\s*[\'\"]//i;
241 $tmp =~ s/[\'\"],?\s*$//;
242 $tmp =~ s/[\'\"]\);\s*$//;
243 $charset = $tmp;
244 } elsif ( $tmp =~ /^\s*[\'\"]port[\'\"]/i ) {
245 $tmp =~ s/^\s*[\'\"]port[\'\"]\s*=>\s*[\'\"]?//i;
246 $tmp =~ s/[\'\"]?,?\s*$//;
247 $tmp =~ s/[\'\"]?\);\s*$//;
248 $port = $tmp;
249 } elsif ( $tmp =~ /^\s*[\'\"]maxrows[\'\"]/i ) {
250 $tmp =~ s/^\s*[\'\"]maxrows[\'\"]\s*=>\s*[\'\"]?//i;
251 $tmp =~ s/[\'\"]?,?\s*$//;
252 $tmp =~ s/[\'\"]?\);\s*$//;
253 $maxrows = $tmp;
254 } elsif ( $tmp =~ /^\s*[\'\"]filter[\'\"]/i ) {
255 $tmp =~ s/^\s*[\'\"]filter[\'\"]\s*=>\s*[\'\"]?//i;
256 $tmp =~ s/[\'\"]?,?\s*$//;
257 $tmp =~ s/[\'\"]?\);\s*$//;
258 $filter = $tmp;
259 } elsif ( $tmp =~ /^\s*[\'\"]name[\'\"]/i ) {
260 $tmp =~ s/^\s*[\'\"]name[\'\"]\s*=>\s*[\'\"]//i;
261 $tmp =~ s/[\'\"],?\s*$//;
262 $tmp =~ s/[\'\"]\);\s*$//;
263 $name = $tmp;
264 } elsif ( $tmp =~ /^\s*[\'\"]binddn[\'\"]/i ) {
265 $tmp =~ s/^\s*[\'\"]binddn[\'\"]\s*=>\s*[\'\"]//i;
266 $tmp =~ s/[\'\"],?\s*$//;
267 $tmp =~ s/[\'\"]\);\s*$//;
268 $binddn = $tmp;
269 } elsif ( $tmp =~ /^\s*[\'\"]bindpw[\'\"]/i ) {
270 $tmp =~ s/^\s*[\'\"]bindpw[\'\"]\s*=>\s*[\'\"]//i;
271 $tmp =~ s/[\'\"],?\s*$//;
272 $tmp =~ s/[\'\"]\);\s*$//;
273 $bindpw = $tmp;
274 } elsif ( $tmp =~ /^\s*[\'\"]protocol[\'\"]/i ) {
275 $tmp =~ s/^\s*[\'\"]protocol[\'\"]\s*=>\s*[\'\"]?//i;
276 $tmp =~ s/[\'\"]?,?\s*$//;
277 $tmp =~ s/[\'\"]?\);\s*$//;
278 $protocol = $tmp;
279 } elsif ( $tmp =~ /^\s*[\'\"]limit_scope[\'\"]/i ) {
280 $tmp =~ s/^\s*[\'\"]limit_scope[\'\"]\s*=>\s*[\'\"]?//i;
281 $tmp =~ s/[\'\"]?,?\s*$//;
282 $tmp =~ s/[\'\"]?\);\s*$//;
283 $limit_scope = $tmp;
284 } elsif ( $tmp =~ /^\s*[\'\"]listing[\'\"]/i ) {
285 $tmp =~ s/^\s*[\'\"]listing[\'\"]\s*=>\s*[\'\"]?//i;
286 $tmp =~ s/[\'\"]?,?\s*$//;
287 $tmp =~ s/[\'\"]?\);\s*$//;
288 $listing = $tmp;
289 } elsif ( $tmp =~ /^\s*[\'\"]writeable[\'\"]/i ) {
290 $tmp =~ s/^\s*[\'\"]writeable[\'\"]\s*=>\s*[\'\"]?//i;
291 $tmp =~ s/[\'\"]?,?\s*$//;
292 $tmp =~ s/[\'\"]?\);\s*$//;
293 $writeable = $tmp;
294 } elsif ( $tmp =~ /^\s*[\'\"]search_tree[\'\"]/i ) {
295 $tmp =~ s/^\s*[\'\"]search_tree[\'\"]\s*=>\s*[\'\"]?//i;
296 $tmp =~ s/[\'\"]?,?\s*$//;
297 $tmp =~ s/[\'\"]?\);\s*$//;
298 $search_tree = $tmp;
299 } elsif ( $tmp =~ /^\s*[\'\"]starttls[\'\"]/i ) {
300 $tmp =~ s/^\s*[\'\"]starttls[\'\"]\s*=>\s*[\'\"]?//i;
301 $tmp =~ s/[\'\"]?,?\s*$//;
302 $tmp =~ s/[\'\"]?\);\s*$//;
303 $starttls = $tmp;
304 }
305 }
306 $ldap_host[$sub] = $host;
307 $ldap_base[$sub] = $base;
308 $ldap_name[$sub] = $name;
309 $ldap_port[$sub] = $port;
310 $ldap_maxrows[$sub] = $maxrows;
311 $ldap_filter[$sub] = $filter;
312 $ldap_charset[$sub] = $charset;
313 $ldap_binddn[$sub] = $binddn;
314 $ldap_bindpw[$sub] = $bindpw;
315 $ldap_protocol[$sub] = $protocol;
316 $ldap_limit_scope[$sub] = $limit_scope;
317 $ldap_listing[$sub] = $listing;
318 $ldap_writeable[$sub] = $writeable;
319 $ldap_search_tree[$sub] = $search_tree;
320 $ldap_starttls[$sub] = $starttls;
321 } elsif ( $options[0] =~ /^(data_dir|attachment_dir|theme_css|org_logo|signout_page)$/ ) {
322 ${ $options[0] } = &change_to_rel_path($options[1]);
323 } else {
324 ${ $options[0] } = $options[1];
325 }
326 }
327 }
328 close FILE;
329
330 # FIXME: unknown introduction date
331 $useSendmail = 'false' if ( lc($useSendmail) ne 'true' );
332 $sendmail_path = "/usr/sbin/sendmail" if ( !$sendmail_path );
333 $pop_before_smtp = 'false' if ( !$pop_before_smtp );
334 $default_unseen_notify = 2 if ( !$default_unseen_notify );
335 $default_unseen_type = 1 if ( !$default_unseen_type );
336 $config_use_color = 0 if ( !$config_use_color );
337 $invert_time = 'false' if ( !$invert_time );
338 $force_username_lowercase = 'false' if ( !$force_username_lowercase );
339 $optional_delimiter = "detect" if ( !$optional_delimiter );
340 $auto_create_special = 'false' if ( !$auto_create_special );
341 $default_use_priority = 'true' if ( !$default_use_priority );
342 $default_use_mdn = 'true' if ( !$default_use_mdn );
343 $delete_folder = 'false' if ( !$delete_folder );
344 $noselect_fix_enable = 'false' if ( !$noselect_fix_enable );
345 $frame_top = "_top" if ( !$frame_top );
346 $provider_uri = '' if ( !$provider_uri );
347 $provider_name = '' if ( !$provider_name );
348 $edit_identity = 'true' if ( !$edit_identity );
349 $edit_name = 'true' if ( !$edit_name );
350 $no_list_for_subscribe = 'false' if ( !$no_list_for_subscribe );
351 $allow_charset_search = 'true' if ( !$allow_charset_search );
352 $allow_advanced_search = 0 if ( !$allow_advanced_search) ;
353 $prefs_user_field = 'user' if ( !$prefs_user_field );
354 $prefs_key_field = 'prefkey' if ( !$prefs_key_field );
355 $prefs_val_field = 'prefval' if ( !$prefs_val_field );
356 $session_name = 'SQMSESSID' if ( !$session_name );
357 $skip_SM_header = 'false' if ( !$skip_SM_header );
358 $default_use_javascript_addr_book = 'false' if (! $default_use_javascript_addr_book);
359
360 # since 1.2.0
361 $hide_sm_attributions = 'false' if ( !$hide_sm_attributions );
362
363 # since 1.4.0
364 $use_smtp_tls= 'false' if ( !$use_smtp_tls);
365 $smtp_auth_mech = 'none' if ( !$smtp_auth_mech );
366 $use_imap_tls = 'false' if ( !$use_imap_tls );
367 $imap_auth_mech = 'login' if ( !$imap_auth_mech );
368
369 # since 1.5.0
370 $show_alternative_names = 'false' if ( !$show_alternative_names );
371 # $available_languages option available only in 1.5.0. removed due to $languages
372 # implementation changes. options are provided by limit_languages plugin
373 # $available_languages = 'all' if ( !$available_languages );
374 $aggressive_decoding = 'false' if ( !$aggressive_decoding );
375 # available only in 1.5.0 and 1.5.1
376 # $advanced_tree = 'false' if ( !$advanced_tree );
377 $use_php_recode = 'false' if ( !$use_php_recode );
378 $use_php_iconv = 'false' if ( !$use_php_iconv );
379
380 # since 1.5.1
381 $use_icons = 'false' if ( !$use_icons );
382 $use_iframe = 'false' if ( !$use_iframe );
383 $lossy_encoding = 'false' if ( !$lossy_encoding );
384 $allow_remote_configtest = 'false' if ( !$allow_remote_configtest );
385 $addrbook_global_table = 'global_abook' if ( !$addrbook_global_table );
386 $addrbook_global_writeable = 'false' if ( !$addrbook_global_writeable );
387 $addrbook_global_listing = 'false' if ( !$addrbook_global_listing );
388 $abook_global_file = '' if ( !$abook_global_file);
389 $abook_global_file_writeable = 'false' if ( !$abook_global_file_writeable);
390 $abook_global_file_listing = 'true' if ( !$abook_global_file_listing );
391 $encode_header_key = '' if ( !$encode_header_key );
392 $hide_auth_header = 'false' if ( !$hide_auth_header );
393 $time_zone_type = '0' if ( !$time_zone_type );
394 $prefs_user_size = 128 if ( !$prefs_user_size );
395 $prefs_key_size = 64 if ( !$prefs_key_size );
396 $prefs_val_size = 65536 if ( !$prefs_val_size );
397
398 # add qmail-inject test here for backwards compatibility
399 if ( !$sendmail_args && $sendmail_path =~ /qmail-inject/ ) {
400 $sendmail_args = '';
401 } elsif ( !$sendmail_args ) {
402 $sendmail_args = '-i -t';
403 }
404
405 $default_fontsize = '' if ( !$default_fontsize);
406 $default_fontset = '' if ( !$default_fontset);
407 if ( !%fontsets) {
408 %fontsets = ('serif', 'serif',
409 'sans', 'helvetica,arial,sans-serif',
410 'comicsans', 'comic sans ms,sans-serif',
411 'tahoma', 'tahoma,sans-serif',
412 'verasans', 'bitstream vera sans,verdana,sans-serif');
413 }
414
415 # $use_imap_tls and $use_smtp_tls are switched to integer since 1.5.1
416 $use_imap_tls = 0 if ( $use_imap_tls eq 'false');
417 $use_imap_tls = 1 if ( $use_imap_tls eq 'true');
418 $use_smtp_tls = 0 if ( $use_smtp_tls eq 'false');
419 $use_smtp_tls = 1 if ( $use_smtp_tls eq 'true');
420 # sorting options changed names and reversed values in 1.5.1
421 $disable_thread_sort = 'false' if ( !$disable_thread_sort );
422 $disable_server_sort = 'false' if ( !$disable_server_sort );
423
424 # since 1.5.2
425 $abook_file_line_length = 2048 if ( !$abook_file_line_length );
426 $config_location_base = '' if ( !$config_location_base );
427 $smtp_sitewide_user = '' if ( !$smtp_sitewide_user );
428 $smtp_sitewide_pass = '' if ( !$smtp_sitewide_pass );
429
430 if ( $ARGV[0] eq '--install-plugin' ) {
431 print "Activating plugin " . $ARGV[1] . "\n";
432 push @plugins, $ARGV[1];
433 save_data();
434 exit(0);
435 } elsif ( $ARGV[0] eq '--remove-plugin' ) {
436 print "Removing plugin " . $ARGV[1] . "\n";
437 foreach $plugin (@plugins) {
438 if ( $plugin ne $ARGV[1] ) {
439 push @newplugins, $plugin;
440 }
441 }
442 @plugins = @newplugins;
443 save_data();
444 exit(0);
445 }
446
447 #####################################################################################
448 if ( $config_use_color == 1 ) {
449 $WHT = "\x1B[37;1m";
450 $NRM = "\x1B[0m";
451 } else {
452 $WHT = "";
453 $NRM = "";
454 $config_use_color = 2;
455 }
456
457 while ( ( $command ne "q" ) && ( $command ne "Q" ) && ( $command ne ":q" ) ) {
458 clear_screen();
459 print $WHT. "SquirrelMail Configuration : " . $NRM;
460 if ( $config == 1 ) { print "Read: config.php"; }
461 elsif ( $config == 2 ) { print "Read: config_default.php"; }
462 print " ($print_config_version)\n";
463 print "---------------------------------------------------------\n";
464
465 if ( $menu == 0 ) {
466 print $WHT. "Main Menu --\n" . $NRM;
467 print "1. Organization Preferences\n";
468 print "2. Server Settings\n";
469 print "3. Folder Defaults\n";
470 print "4. General Options\n";
471 print "5. Templates\n";
472 print "6. Address Books\n";
473 print "7. Message of the Day (MOTD)\n";
474 print "8. Plugins\n";
475 print "9. Database\n";
476 print "10. Language settings\n";
477 print "11. Tweaks\n";
478 print "\n";
479 print "D. Set pre-defined settings for specific IMAP servers\n";
480 print "\n";
481 } elsif ( $menu == 1 ) {
482 print $WHT. "Organization Preferences\n" . $NRM;
483 print "1. Organization Name : $WHT$org_name$NRM\n";
484 print "2. Organization Logo : $WHT$org_logo$NRM\n";
485 print "3. Org. Logo Width/Height : $WHT($org_logo_width/$org_logo_height)$NRM\n";
486 print "4. Organization Title : $WHT$org_title$NRM\n";
487 print "5. Signout Page : $WHT$signout_page$NRM\n";
488 print "6. Top Frame : $WHT$frame_top$NRM\n";
489 print "7. Provider link : $WHT$provider_uri$NRM\n";
490 print "8. Provider name : $WHT$provider_name$NRM\n";
491
492 print "\n";
493 print "R Return to Main Menu\n";
494 } elsif ( $menu == 2 ) {
495 print $WHT. "Server Settings\n\n" . $NRM;
496 print $WHT . "General" . $NRM . "\n";
497 print "-------\n";
498 print "1. Domain : $WHT$domain$NRM\n";
499 print "2. Invert Time : $WHT$invert_time$NRM\n";
500 print "3. Sendmail or SMTP : $WHT";
501 if ( lc($useSendmail) eq 'true' ) {
502 print "Sendmail";
503 } else {
504 print "SMTP";
505 }
506 print "$NRM\n";
507 print "\n";
508
509 if ( $show_imap_settings ) {
510 print $WHT . "IMAP Settings". $NRM . "\n--------------\n";
511 print "4. IMAP Server : $WHT$imapServerAddress$NRM\n";
512 print "5. IMAP Port : $WHT$imapPort$NRM\n";
513 print "6. Authentication type : $WHT$imap_auth_mech$NRM\n";
514 print "7. Secure IMAP (TLS) : $WHT" . display_use_tls($use_imap_tls) . "$NRM\n";
515 print "8. Server software : $WHT$imap_server_type$NRM\n";
516 print "9. Delimiter : $WHT$optional_delimiter$NRM\n";
517 print "\n";
518 } elsif ( $show_smtp_settings ) {
519 if ( lc($useSendmail) eq 'true' ) {
520 print $WHT . "Sendmail" . $NRM . "\n--------\n";
521 print "4. Sendmail Path : $WHT$sendmail_path$NRM\n";
522 print "5. Sendmail arguments : $WHT$sendmail_args$NRM\n";
523 print "6. Header encryption key : $WHT$encode_header_key$NRM\n";
524 print "\n";
525 } else {
526 print $WHT . "SMTP Settings" . $NRM . "\n-------------\n";
527 print "4. SMTP Server : $WHT$smtpServerAddress$NRM\n";
528 print "5. SMTP Port : $WHT$smtpPort$NRM\n";
529 print "6. POP before SMTP : $WHT$pop_before_smtp$NRM\n";
530 print "7. SMTP Authentication : $WHT$smtp_auth_mech" . display_smtp_sitewide_userpass() ."$NRM\n";
531 print "8. Secure SMTP (TLS) : $WHT" . display_use_tls($use_smtp_tls) . "$NRM\n";
532 print "9. Header encryption key : $WHT$encode_header_key$NRM\n";
533 print "\n";
534 }
535 }
536
537 if ($show_imap_settings == 0) {
538 print "A. Update IMAP Settings : ";
539 print "$WHT$imapServerAddress$NRM:";
540 print "$WHT$imapPort$NRM ";
541 print "($WHT$imap_server_type$NRM)\n";
542 }
543 if ($show_smtp_settings == 0) {
544 if ( lc($useSendmail) eq 'true' ) {
545 print "B. Change Sendmail Config : $WHT$sendmail_path$NRM\n";
546 } else {
547 print "B. Update SMTP Settings : ";
548 print "$WHT$smtpServerAddress$NRM:";
549 print "$WHT$smtpPort$NRM\n";
550 }
551 }
552 if ( $show_smtp_settings || $show_imap_settings )
553 {
554 print "H. Hide " .
555 ($show_imap_settings ? "IMAP Server" :
556 (lc($useSendmail) eq 'true') ? "Sendmail" : "SMTP") . " Settings\n";
557 }
558
559 print "\n";
560 print "R Return to Main Menu\n";
561 } elsif ( $menu == 3 ) {
562 print $WHT. "Folder Defaults\n" . $NRM;
563 print "1. Default Folder Prefix : $WHT$default_folder_prefix$NRM\n";
564 print "2. Show Folder Prefix Option : $WHT$show_prefix_option$NRM\n";
565 print "3. Trash Folder : $WHT$trash_folder$NRM\n";
566 print "4. Sent Folder : $WHT$sent_folder$NRM\n";
567 print "5. Drafts Folder : $WHT$draft_folder$NRM\n";
568 print "6. By default, move to trash : $WHT$default_move_to_trash$NRM\n";
569 print "7. By default, move to sent : $WHT$default_move_to_sent$NRM\n";
570 print "8. By default, save as draft : $WHT$default_save_as_draft$NRM\n";
571 print "9. List Special Folders First : $WHT$list_special_folders_first$NRM\n";
572 print "10. Show Special Folders Color : $WHT$use_special_folder_color$NRM\n";
573 print "11. Auto Expunge : $WHT$auto_expunge$NRM\n";
574 print "12. Default Sub. of INBOX : $WHT$default_sub_of_inbox$NRM\n";
575 print "13. Show 'Contain Sub.' Option : $WHT$show_contain_subfolders_option$NRM\n";
576 print "14. Default Unseen Notify : $WHT$default_unseen_notify$NRM\n";
577 print "15. Default Unseen Type : $WHT$default_unseen_type$NRM\n";
578 print "16. Auto Create Special Folders : $WHT$auto_create_special$NRM\n";
579 print "17. Folder Delete Bypasses Trash : $WHT$delete_folder$NRM\n";
580 print "18. Enable /NoSelect folder fix : $WHT$noselect_fix_enable$NRM\n";
581 print "\n";
582 print "R Return to Main Menu\n";
583 } elsif ( $menu == 4 ) {
584 print $WHT. "General Options\n" . $NRM;
585 print "1. Data Directory : $WHT$data_dir$NRM\n";
586 print "2. Attachment Directory : $WHT$attachment_dir$NRM\n";
587 print "3. Directory Hash Level : $WHT$dir_hash_level$NRM\n";
588 print "4. Default Left Size : $WHT$default_left_size$NRM\n";
589 print "5. Usernames in Lowercase : $WHT$force_username_lowercase$NRM\n";
590 print "6. Allow use of priority : $WHT$default_use_priority$NRM\n";
591 print "7. Hide SM attributions : $WHT$hide_sm_attributions$NRM\n";
592 print "8. Allow use of receipts : $WHT$default_use_mdn$NRM\n";
593 print "9. Allow editing of identity : $WHT$edit_identity$NRM\n";
594 print " Allow editing of name : $WHT$edit_name$NRM\n";
595 print " Remove username from header : $WHT$hide_auth_header$NRM\n";
596 print "10. Disable server thread sort : $WHT$disable_thread_sort$NRM\n";
597 print "11. Disable server-side sorting : $WHT$disable_server_sort$NRM\n";
598 print "12. Allow server charset search : $WHT$allow_charset_search$NRM\n";
599 print "13. Allow advanced search : $WHT$allow_advanced_search$NRM\n";
600 print "14. PHP session name : $WHT$session_name$NRM\n";
601 print "15. Time zone configuration : $WHT$time_zone_type$NRM\n";
602 print "16. Location base : $WHT$config_location_base$NRM\n";
603 print "\n";
604 print "R Return to Main Menu\n";
605 } elsif ( $menu == 5 ) {
606 print $WHT. "Themes\n" . $NRM;
607 print "1. Change Template set\n";
608 # for ( $count = 0 ; $count <= $#theme_name/2 ; $count++ ) {
609 # $temp_name = $theme_name[$count*2];
610 # printf " %s%*s %s\n", $temp_name,
611 # 40 - length($temp_name), " ",
612 # $theme_name[($count*2)+1];
613 # }
614 print "2. CSS File : $WHT$theme_css$NRM\n";
615 print "3. Default font size: $WHT$default_fontsize$NRM\n";
616 print "4. Change available font sets\n";
617 print "5. Change Themes\n";
618
619 print "\n";
620 print "R Return to Main Menu\n";
621 } elsif ( $menu == 6 ) {
622 print $WHT. "Address Books\n" . $NRM;
623 print "1. Change LDAP Servers\n";
624 for ( $count = 0 ; $count <= $#ldap_host ; $count++ ) {
625 print " > $ldap_host[$count]\n";
626 }
627 print "2. Use Javascript address book search : $WHT$default_use_javascript_addr_book$NRM\n";
628 print "3. Global address book file : $WHT$abook_global_file$NRM\n";
629 print "4. Allow writing into global file address book : $WHT$abook_global_file_writeable$NRM\n";
630 print "5. Allow listing of global file address book : $WHT$abook_global_file_listing$NRM\n";
631 print "6. Allowed address book line length : $WHT$abook_file_line_length$NRM\n";
632 print "\n";
633 print "R Return to Main Menu\n";
634 } elsif ( $menu == 7 ) {
635 print $WHT. "Message of the Day (MOTD)\n" . $NRM;
636 print "\n$motd\n";
637 print "\n";
638 print "1 Edit the MOTD\n";
639 print "\n";
640 print "R Return to Main Menu\n";
641 } elsif ( $menu == 8 ) {
642 print $WHT. "Plugins\n" . $NRM;
643 print " Installed Plugins\n";
644 $num = 0;
645 for ( $count = 0 ; $count <= $#plugins ; $count++ ) {
646 $num = $count + 1;
647 print " $num. $plugins[$count]\n";
648 }
649 print "\n Available Plugins:\n";
650 opendir( DIR, "../plugins" );
651 @files = readdir(DIR);
652 $pos = 0;
653 @unused_plugins = ();
654 for ( $i = 0 ; $i <= $#files ; $i++ ) {
655 if ( -d "../plugins/" . $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne "CVS" ) {
656 $match = 0;
657 for ( $k = 0 ; $k <= $#plugins ; $k++ ) {
658 if ( $plugins[$k] eq $files[$i] ) {
659 $match = 1;
660 }
661 }
662 if ( $match == 0 ) {
663 $unused_plugins[$pos] = $files[$i];
664 $pos++;
665 }
666 }
667 }
668
669 for ( $i = 0 ; $i <= $#unused_plugins ; $i++ ) {
670 $num = $num + 1;
671 print " $num. $unused_plugins[$i]\n";
672 }
673 closedir DIR;
674
675 print "\n";
676 print "R Return to Main Menu\n";
677 } elsif ( $menu == 9 ) {
678 print $WHT. "Database\n" . $NRM;
679 print "1. DSN for Address Book : $WHT$addrbook_dsn$NRM\n";
680 print "2. Table for Address Book : $WHT$addrbook_table$NRM\n";
681 print "\n";
682 print "3. DSN for Preferences : $WHT$prefs_dsn$NRM\n";
683 print "4. Table for Preferences : $WHT$prefs_table$NRM\n";
684 print "5. Field for username : $WHT$prefs_user_field$NRM ($prefs_user_size)\n";
685 print "6. Field for prefs key : $WHT$prefs_key_field$NRM ($prefs_key_size)\n";
686 print "7. Field for prefs value : $WHT$prefs_val_field$NRM ($prefs_val_size)\n";
687 print "\n";
688 print "8. DSN for Global Address Book : $WHT$addrbook_global_dsn$NRM\n";
689 print "9. Table for Global Address Book : $WHT$addrbook_global_table$NRM\n";
690 print "10. Allow writing into Global Address Book : $WHT$addrbook_global_writeable$NRM\n";
691 print "11. Allow listing of Global Address Book : $WHT$addrbook_global_listing$NRM\n";
692 print "\n";
693 print "R Return to Main Menu\n";
694 } elsif ( $menu == 10 ) {
695 print $WHT. "Language settings\n" . $NRM;
696 print "1. Default Language : $WHT$squirrelmail_default_language$NRM\n";
697 print "2. Default Charset : $WHT$default_charset$NRM\n";
698 print "3. Show alternative language names : $WHT$show_alternative_names$NRM\n";
699 print "4. Enable aggressive decoding : $WHT$aggressive_decoding$NRM\n";
700 print "5. Enable lossy encoding : $WHT$lossy_encoding$NRM\n";
701 print "\n";
702 print "R Return to Main Menu\n";
703 } elsif ( $menu == 11 ) {
704 print $WHT. "Interface tweaks\n" . $NRM;
705 print "1. Display html mails in iframe : $WHT$use_iframe$NRM\n";
706 print "2. Use Icons : $WHT$use_icons$NRM\n";
707 print "\n";
708 print $WHT. "PHP tweaks\n" . $NRM;
709 print "3. Use php recode functions : $WHT$use_php_recode$NRM\n";
710 print "4. Use php iconv functions : $WHT$use_php_iconv$NRM\n";
711 print "\n";
712 print $WHT. "Configuration tweaks\n" . $NRM;
713 print "5. Allow remote configtest : $WHT$allow_remote_configtest$NRM\n";
714 print "\n";
715 print "R Return to Main Menu\n";
716 }
717 if ( $config_use_color == 1 ) {
718 print "C Turn color off\n";
719 } else {
720 print "C Turn color on\n";
721 }
722 print "S Save data\n";
723 print "Q Quit\n";
724
725 print "\n";
726 print "Command >> " . $WHT;
727 $command = <STDIN>;
728 $command =~ s/[\n\r]//g;
729 $command =~ tr/A-Z/a-z/;
730 print "$NRM\n";
731
732 # Read the commands they entered.
733 if ( $command eq "r" ) {
734 $menu = 0;
735 } elsif ( $command eq "s" ) {
736 save_data();
737 print "Press enter to continue...";
738 $tmp = <STDIN>;
739 $saved = 1;
740 } elsif ( ( $command eq "q" ) && ( $saved == 0 ) ) {
741 print "You have not saved your data.\n";
742 print "Save? [" . $WHT . "Y" . $NRM . "/n]: ";
743 $save = <STDIN>;
744 if ( ( $save =~ /^y/i ) || ( $save =~ /^\s*$/ ) ) {
745 save_data();
746 }
747 } elsif ( $command eq "c" ) {
748 if ( $config_use_color == 1 ) {
749 $config_use_color = 2;
750 $WHT = "";
751 $NRM = "";
752 } else {
753 $config_use_color = 1;
754 $WHT = "\x1B[37;1m";
755 $NRM = "\x1B[0m";
756 }
757 } elsif ( $command eq "d" && $menu == 0 ) {
758 set_defaults();
759 } else {
760 $saved = 0;
761 if ( $menu == 0 ) {
762 if ( ( $command > 0 ) && ( $command < 12 ) ) {
763 $menu = $command;
764 }
765 } elsif ( $menu == 1 ) {
766 if ( $command == 1 ) { $org_name = command1(); }
767 elsif ( $command == 2 ) { $org_logo = command2(); }
768 elsif ( $command == 3 ) { ($org_logo_width,$org_logo_height) = command2a(); }
769 elsif ( $command == 4 ) { $org_title = command3(); }
770 elsif ( $command == 5 ) { $signout_page = command4(); }
771 elsif ( $command == 6 ) { $frame_top = command6(); }
772 elsif ( $command == 7 ) { $provider_uri = command7(); }
773 elsif ( $command == 8 ) { $provider_name = command8(); }
774
775 } elsif ( $menu == 2 ) {
776 if ( $command eq "a" ) { $show_imap_settings = 1; $show_smtp_settings = 0; }
777 elsif ( $command eq "b" ) { $show_imap_settings = 0; $show_smtp_settings = 1; }
778 elsif ( $command eq "h" ) { $show_imap_settings = 0; $show_smtp_settings = 0; }
779 elsif ( $command <= 3 ) {
780 if ( $command == 1 ) { $domain = command11(); }
781 elsif ( $command == 2 ) { $invert_time = command110(); }
782 elsif ( $command == 3 ) { $useSendmail = command14(); }
783 $show_imap_settings = 0; $show_smtp_settings = 0;
784 } elsif ( $show_imap_settings ) {
785 if ( $command == 4 ) { $imapServerAddress = command12(); }
786 elsif ( $command == 5 ) { $imapPort = command13(); }
787 elsif ( $command == 6 ) { $imap_auth_mech = command112a(); }
788 elsif ( $command == 7 ) { $use_imap_tls = command_use_tls("IMAP",$use_imap_tls); }
789 elsif ( $command == 8 ) { $imap_server_type = command19(); }
790 elsif ( $command == 9 ) { $optional_delimiter = command111(); }
791 } elsif ( $show_smtp_settings && lc($useSendmail) eq 'true' ) {
792 if ( $command == 4 ) { $sendmail_path = command15(); }
793 elsif ( $command == 5 ) { $sendmail_args = command_sendmail_args(); }
794 elsif ( $command == 6 ) { $encode_header_key = command114(); }
795 } elsif ( $show_smtp_settings ) {
796 if ( $command == 4 ) { $smtpServerAddress = command16(); }
797 elsif ( $command == 5 ) { $smtpPort = command17(); }
798 elsif ( $command == 6 ) { $pop_before_smtp = command18a(); }
799 elsif ( $command == 7 ) { $smtp_auth_mech = command112b(); }
800 elsif ( $command == 8 ) { $use_smtp_tls = command_use_tls("SMTP",$use_smtp_tls); }
801 elsif ( $command == 9 ) { $encode_header_key = command114(); }
802 }
803 } elsif ( $menu == 3 ) {
804 if ( $command == 1 ) { $default_folder_prefix = command21(); }
805 elsif ( $command == 2 ) { $show_prefix_option = command22(); }
806 elsif ( $command == 3 ) { $trash_folder = command23a(); }
807 elsif ( $command == 4 ) { $sent_folder = command23b(); }
808 elsif ( $command == 5 ) { $draft_folder = command23c(); }
809 elsif ( $command == 6 ) { $default_move_to_trash = command24a(); }
810 elsif ( $command == 7 ) { $default_move_to_sent = command24b(); }
811 elsif ( $command == 8 ) { $default_save_as_draft = command24c(); }
812 elsif ( $command == 9 ) { $list_special_folders_first = command27(); }
813 elsif ( $command == 10 ) { $use_special_folder_color = command28(); }
814 elsif ( $command == 11 ) { $auto_expunge = command29(); }
815 elsif ( $command == 12 ) { $default_sub_of_inbox = command210(); }
816 elsif ( $command == 13 ) { $show_contain_subfolders_option = command211(); }
817 elsif ( $command == 14 ) { $default_unseen_notify = command212(); }
818 elsif ( $command == 15 ) { $default_unseen_type = command213(); }
819 elsif ( $command == 16 ) { $auto_create_special = command214(); }
820 elsif ( $command == 17 ) { $delete_folder = command215(); }
821 elsif ( $command == 18 ) { $noselect_fix_enable = command216(); }
822 } elsif ( $menu == 4 ) {
823 if ( $command == 1 ) { $data_dir = command33a(); }
824 elsif ( $command == 2 ) { $attachment_dir = command33b(); }
825 elsif ( $command == 3 ) { $dir_hash_level = command33c(); }
826 elsif ( $command == 4 ) { $default_left_size = command35(); }
827 elsif ( $command == 5 ) { $force_username_lowercase = command36(); }
828 elsif ( $command == 6 ) { $default_use_priority = command37(); }
829 elsif ( $command == 7 ) { $hide_sm_attributions = command38(); }
830 elsif ( $command == 8 ) { $default_use_mdn = command39(); }
831 elsif ( $command == 9 ) { $edit_identity = command310(); }
832 elsif ( $command == 10 ) { $disable_thread_sort = command312(); }
833 elsif ( $command == 11 ) { $disable_server_sort = command313(); }
834 elsif ( $command == 12 ) { $allow_charset_search = command314(); }
835 elsif ( $command == 13 ) { $allow_advanced_search = command316(); }
836 elsif ( $command == 14 ) { $session_name = command317(); }
837 elsif ( $command == 15 ) { $time_zone_type = command318(); }
838 elsif ( $command == 16 ) { $config_location_base = command_config_location_base(); }
839 } elsif ( $menu == 5 ) {
840 if ( $command == 1 ) { $templateset_default = command_templates(); }
841 elsif ( $command == 2 ) { $theme_css = command42(); }
842 elsif ( $command == 3 ) { $default_fontsize = command_default_fontsize(); }
843 elsif ( $command == 4 ) { command_fontsets(); }
844 elsif ( $command == 5 ) { command41(); }
845 } elsif ( $menu == 6 ) {
846 if ( $command == 1 ) { command61(); }
847 elsif ( $command == 2 ) { command62(); }
848 elsif ( $command == 3 ) { $abook_global_file=command63(); }
849 elsif ( $command == 4 ) { command64(); }
850 elsif ( $command == 5 ) { command65(); }
851 elsif ( $command == 6 ) { command_abook_file_line_length(); }
852 } elsif ( $menu == 7 ) {
853 if ( $command == 1 ) { $motd = command71(); }
854 } elsif ( $menu == 8 ) {
855 if ( $command =~ /^[0-9]+/ ) { @plugins = command81(); }
856 } elsif ( $menu == 9 ) {
857 if ( $command == 1 ) { $addrbook_dsn = command91(); }
858 elsif ( $command == 2 ) { $addrbook_table = command92(); }
859 elsif ( $command == 3 ) { $prefs_dsn = command93(); }
860 elsif ( $command == 4 ) { $prefs_table = command94(); }
861 elsif ( $command == 5 ) { $prefs_user_field = command95(); }
862 elsif ( $command == 6 ) { $prefs_key_field = command96(); }
863 elsif ( $command == 7 ) { $prefs_val_field = command97(); }
864 elsif ( $command == 8 ) { $addrbook_global_dsn = command98(); }
865 elsif ( $command == 9 ) { $addrbook_global_table = command99(); }
866 elsif ( $command == 10 ) { $addrbook_global_writeable = command910(); }
867 elsif ( $command == 11 ) { $addrbook_global_listing = command911(); }
868 } elsif ( $menu == 10 ) {
869 if ( $command == 1 ) { $squirrelmail_default_language = commandA1(); }
870 elsif ( $command == 2 ) { $default_charset = commandA2(); }
871 elsif ( $command == 3 ) { $show_alternative_names = commandA3(); }
872 elsif ( $command == 4 ) { $aggressive_decoding = commandA4(); }
873 elsif ( $command == 5 ) { $lossy_encoding = commandA5(); }
874 } elsif ( $menu == 11 ) {
875 if ( $command == 1 ) { $use_iframe = commandB2(); }
876 elsif ( $command == 2 ) { $use_icons = commandB3(); }
877 elsif ( $command == 3 ) { $use_php_recode = commandB4(); }
878 elsif ( $command == 4 ) { $use_php_iconv = commandB5(); }
879 elsif ( $command == 5 ) { $allow_remote_configtest = commandB6(); }
880 }
881 }
882 }
883
884 # we exit here
885 print "\nExiting conf.pl.\n".
886 "You might want to test your configuration by browsing to\n".
887 "http://your-squirrelmail-location/src/configtest.php\n".
888 "Happy SquirrelMailing!\n\n";
889
890
891 ####################################################################################
892
893 # org_name
894 sub command1 {
895 print "We have tried to make the name SquirrelMail as transparent as\n";
896 print "possible. If you set up an organization name, most places where\n";
897 print "SquirrelMail would take credit will be credited to your organization.\n";
898 print "\n";
899 print "If your Organization Name includes a '\$', please precede it with a \\. \n";
900 print "Other '\$' will be considered the beginning of a variable that\n";
901 print "must be defined before the \$org_name is printed.\n";
902 print "\n";
903 print "[$WHT$org_name$NRM]: $WHT";
904 $new_org_name = <STDIN>;
905 if ( $new_org_name eq "\n" ) {
906 $new_org_name = $org_name;
907 } else {
908 $new_org_name =~ s/[\r\n]//g;
909 $new_org_name =~ s/\"/&quot;/g;
910 }
911 return $new_org_name;
912 }
913
914 # org_logo
915 sub command2 {
916 print "Your organization's logo is an image that will be displayed at\n";
917 print "different times throughout SquirrelMail. ";
918 print "\n";
919 print "Please be aware of the following: \n";
920 print " - Relative URLs are relative to the config dir\n";
921 print " to use the default logo, use ../images/sm_logo.png\n";
922 print " - To specify a logo defined outside the SquirrelMail source tree\n";
923 print " use the absolute URL the webserver would use to include the file\n";
924 print " e.g. http://www.example.com/images/mylogo.gif or /images/mylogo.jpg\n";
925 print "\n";
926 print "[$WHT$org_logo$NRM]: $WHT";
927 $new_org_logo = <STDIN>;
928 if ( $new_org_logo eq "\n" ) {
929 $new_org_logo = $org_logo;
930 } else {
931 $new_org_logo =~ s/[\r\n]//g;
932 }
933 return $new_org_logo;
934 }
935
936 # org_logo_width
937 sub command2a {
938 print "Your organization's logo is an image that will be displayed at\n";
939 print "different times throughout SquirrelMail. Width\n";
940 print "and Height of your logo image. Use '0' to disable.\n";
941 print "\n";
942 print "Width: [$WHT$org_logo_width$NRM]: $WHT";
943 $new_org_logo_width = <STDIN>;
944 $new_org_logo_width =~ tr/0-9//cd; # only want digits!
945 if ( $new_org_logo_width eq '' ) {
946 $new_org_logo_width = $org_logo_width;
947 }
948 if ( $new_org_logo_width > 0 ) {
949 print "Height: [$WHT$org_logo_height$NRM]: $WHT";
950 $new_org_logo_height = <STDIN>;
951 $new_org_logo_height =~ tr/0-9//cd; # only want digits!
952 if( $new_org_logo_height eq '' ) {
953 $new_org_logo_height = $org_logo_height;
954 }
955 } else {
956 $new_org_logo_height = 0;
957 }
958 return ($new_org_logo_width, $new_org_logo_height);
959 }
960
961 # org_title
962 sub command3 {
963 print "A title is what is displayed at the top of the browser window in\n";
964 print "the titlebar. Usually this will end up looking something like:\n";
965 print "\"Netscape: $org_title\"\n";
966 print "\n";
967 print "If your Organization Title includes a '\$', please precede it with a \\. \n";
968 print "Other '\$' will be considered the beginning of a variable that\n";
969 print "must be defined before the \$org_title is printed.\n";
970 print "\n";
971 print "[$WHT$org_title$NRM]: $WHT";
972 $new_org_title = <STDIN>;
973 if ( $new_org_title eq "\n" ) {
974 $new_org_title = $org_title;
975 } else {
976 $new_org_title =~ s/[\r\n]//g;
977 $new_org_title =~ s/\"/\'/g;
978 }
979 return $new_org_title;
980 }
981
982 # signout_page
983 sub command4 {
984 print "When users click the Sign Out button they will be logged out and\n";
985 print "then sent to signout_page. If signout_page is left empty,\n";
986 print "(hit space and then return) they will be taken, as normal,\n";
987 print "to the default and rather sparse SquirrelMail signout page.\n";
988 print "\n";
989 print "[$WHT$signout_page$NRM]: $WHT";
990 $new_signout_page = <STDIN>;
991 if ( $new_signout_page eq "\n" ) {
992 $new_signout_page = $signout_page;
993 } else {
994 $new_signout_page =~ s/[\r\n]//g;
995 $new_signout_page =~ s/^\s+$//g;
996 }
997 return $new_signout_page;
998 }
999
1000 # Default top frame
1001 sub command6 {
1002 print "SquirrelMail defaults to using the whole of the browser window.\n";
1003 print "This allows you to keep it within a specified frame. The default\n";
1004 print "is '_top'\n";
1005 print "\n";
1006 print "[$WHT$frame_top$NRM]: $WHT";
1007 $new_frame_top = <STDIN>;
1008 if ( $new_frame_top eq "\n" ) {
1009 $new_frame_top = '_top';
1010 } else {
1011 $new_frame_top =~ s/[\r\n]//g;
1012 $new_frame_top =~ s/^\s+$//g;
1013 }
1014 return $new_frame_top;
1015 }
1016
1017 # Default link to provider
1018 sub command7 {
1019 print "Here you can set the link on the right of the page.\n";
1020 print "If empty, it will link to the SquirrelMail About page.\n";
1021 print "\n";
1022 print "[$WHT$provider_uri$NRM]: $WHT";
1023 $new_provider_uri = <STDIN>;
1024 if ( $new_provider_uri eq "\n" ) {
1025 $new_provider_uri = '';
1026 } else {
1027 $new_provider_uri =~ s/[\r\n]//g;
1028 $new_provider_uri =~ s/^\s+$//g;
1029 }
1030 return $new_provider_uri;
1031 }
1032
1033 sub command8 {
1034 print "Here you can set the name of the link on the right of the page.\n";
1035 print "The default is 'SquirrelMail'\n";
1036 print "\n";
1037 print "[$WHT$provider_name$NRM]: $WHT";
1038 $new_provider_name = <STDIN>;
1039 if ( $new_provider_name eq "\n" ) {
1040 $new_provider_name = 'SquirrelMail';
1041 } else {
1042 $new_provider_name =~ s/[\r\n]//g;
1043 $new_provider_name =~ s/^\s+$//g;
1044 $new_provider_name =~ s/\'/\\'/g;
1045 }
1046 return $new_provider_name;
1047 }
1048
1049 ####################################################################################
1050
1051 # domain
1052 sub command11 {
1053 print "The domain name is the suffix at the end of all email addresses. If\n";
1054 print "for example, your email address is jdoe\@example.com, then your domain\n";
1055 print "would be example.com.\n";
1056 print "\n";
1057 print "[$WHT$domain$NRM]: $WHT";
1058 $new_domain = <STDIN>;
1059 if ( $new_domain eq "\n" ) {
1060 $new_domain = $domain;
1061 } else {
1062 $new_domain =~ s/[\r\n]//g;
1063 }
1064 return $new_domain;
1065 }
1066
1067 # imapServerAddress
1068 sub command12 {
1069 print "This is the hostname where your IMAP server can be contacted.\n";
1070 print "[$WHT$imapServerAddress$NRM]: $WHT";
1071 $new_imapServerAddress = <STDIN>;
1072 if ( $new_imapServerAddress eq "\n" ) {
1073 $new_imapServerAddress = $imapServerAddress;
1074 } else {
1075 $new_imapServerAddress =~ s/[\r\n]//g;
1076 }
1077 return $new_imapServerAddress;
1078 }
1079
1080 # imapPort
1081 sub command13 {
1082 print "This is the port that your IMAP server is on. Usually this is 143.\n";
1083 print "[$WHT$imapPort$NRM]: $WHT";
1084 $new_imapPort = <STDIN>;
1085 if ( $new_imapPort eq "\n" ) {
1086 $new_imapPort = $imapPort;
1087 } else {
1088 $new_imapPort =~ s/[\r\n]//g;
1089 }
1090 return $new_imapPort;
1091 }
1092
1093 # useSendmail
1094 sub command14 {
1095 print "You now need to choose the method that you will use for sending\n";
1096 print "messages in SquirrelMail. You can either connect to an SMTP server\n";
1097 print "or use sendmail directly.\n";
1098 if ( lc($useSendmail) eq 'true' ) {
1099 $default_value = "1";
1100 } else {
1101 $default_value = "2";
1102 }
1103 print "\n";
1104 print " 1. Sendmail\n";
1105 print " 2. SMTP\n";
1106 print "Your choice [1/2] [$WHT$default_value$NRM]: $WHT";
1107 $use_sendmail = <STDIN>;
1108 if ( ( $use_sendmail =~ /^1\n/i )
1109 || ( ( $use_sendmail =~ /^\n/ ) && ( $default_value eq "1" ) ) ) {
1110 $useSendmail = 'true';
1111 } else {
1112 $useSendmail = 'false';
1113 }
1114 return $useSendmail;
1115 }
1116
1117 # sendmail_path
1118 sub command15 {
1119 print "Specify where the sendmail executable is located. Usually /usr/sbin/sendmail\n";
1120 print "[$WHT$sendmail_path$NRM]: $WHT";
1121 $new_sendmail_path = <STDIN>;
1122 if ( $new_sendmail_path eq "\n" ) {
1123 $new_sendmail_path = $sendmail_path;
1124 } else {
1125 $new_sendmail_path =~ s/[\r\n]//g;
1126 }
1127 return $new_sendmail_path;
1128 }
1129
1130 # Extra sendmail arguments
1131 sub command_sendmail_args {
1132 print "Specify additional sendmail program arguments.\n";
1133 print "\n";
1134 print "Make sure that arguments are supported by your sendmail program. -f argument \n";
1135 print "is added automatically by SquirrelMail scripts. Variable defaults to standard\n";
1136 print "/usr/sbin/sendmail arguments. If you use qmail-inject, nbsmtp or any other \n";
1137 print "sendmail wrapper, which does not support -i and -t arguments, set variable to\n";
1138 print "empty string or use arguments suitable for your mailer.\n";
1139 print "\n";
1140 print "[$WHT$sendmail_args$NRM]: $WHT";
1141 $new_sendmail_args = <STDIN>;
1142 if ( $new_sendmail_args eq "\n" ) {
1143 $new_sendmail_args = $sendmail_args;
1144 } else {
1145 # strip linefeeds and crs.
1146 $new_sendmail_args =~ s/[\r\n]//g;
1147 }
1148 return trim($new_sendmail_args);
1149 }
1150
1151 # smtpServerAddress
1152 sub command16 {
1153 print "This is the hostname of your SMTP server.\n";
1154 print "[$WHT$smtpServerAddress$NRM]: $WHT";
1155 $new_smtpServerAddress = <STDIN>;
1156 if ( $new_smtpServerAddress eq "\n" ) {
1157 $new_smtpServerAddress = $smtpServerAddress;
1158 } else {
1159 $new_smtpServerAddress =~ s/[\r\n]//g;
1160 }
1161 return $new_smtpServerAddress;
1162 }
1163
1164 # smtpPort
1165 sub command17 {
1166 print "This is the port to connect to for SMTP. Usually 25.\n";
1167 print "[$WHT$smtpPort$NRM]: $WHT";
1168 $new_smtpPort = <STDIN>;
1169 if ( $new_smtpPort eq "\n" ) {
1170 $new_smtpPort = $smtpPort;
1171 } else {
1172 $new_smtpPort =~ s/[\r\n]//g;
1173 }
1174 return $new_smtpPort;
1175 }
1176
1177 # pop before SMTP
1178 sub command18a {
1179 print "Do you wish to use POP3 before SMTP? Your server must\n";
1180 print "support this in order for SquirrelMail to work with it.\n";
1181
1182 $YesNo = 'n';
1183 $YesNo = 'y' if ( lc($pop_before_smtp) eq 'true' );
1184
1185 print "Use pop before SMTP (y/n) [$WHT$YesNo$NRM]: $WHT";
1186
1187 $new_pop_before_smtp = <STDIN>;
1188 $new_pop_before_smtp =~ tr/yn//cd;
1189 return 'true' if ( $new_pop_before_smtp eq "y" );
1190 return 'false' if ( $new_pop_before_smtp eq "n" );
1191 return $pop_before_smtp;
1192 }
1193
1194 # imap_server_type
1195 sub command19 {
1196 print "Each IMAP server has its own quirks. As much as we tried to stick\n";
1197 print "to standards, it doesn't help much if the IMAP server doesn't follow\n";
1198 print "the same principles. We have made some work-arounds for some of\n";
1199 print "these servers. If you would like to use them, please select your\n";
1200 print "IMAP server. If you do not wish to use these work-arounds, you can\n";
1201 print "set this to \"other\", and none will be used.\n";
1202 print " courier = Courier IMAP server\n";
1203 print " cyrus = Cyrus IMAP server\n";
1204 print " dovecot = Dovecot Secure IMAP server\n";
1205 print " exchange = Microsoft Exchange IMAP server\n";
1206 print " hmailserver = hMailServer\n";
1207 print " macosx = Mac OS X Mailserver\n";
1208 print " mercury32 = Mercury Mail Transport System\n";
1209 print " uw = University of Washington's IMAP server\n";
1210 print "\n";
1211 print " other = Not one of the above servers\n";
1212 print "\n";
1213 print "[$WHT$imap_server_type$NRM]: $WHT";
1214 $new_imap_server_type = <STDIN>;
1215
1216 if ( $new_imap_server_type eq "\n" ) {
1217 $new_imap_server_type = $imap_server_type;
1218 } else {
1219 $new_imap_server_type =~ s/[\r\n]//g;
1220 }
1221 return $new_imap_server_type;
1222 }
1223
1224 # invert_time
1225 sub command110 {
1226 print "Sometimes the date of messages sent is messed up (off by a few hours\n";
1227 print "on some machines). Typically this happens if the system doesn't support\n";
1228 print "tm_gmtoff. It will happen only if your time zone is \"negative\".\n";
1229 print "This most often occurs on Solaris 7 machines in the United States.\n";
1230 print "By default, this is off. It should be kept off unless problems surface\n";
1231 print "about the time that messages are sent.\n";
1232 print " no = Do NOT fix time -- almost always correct\n";
1233 print " yes = Fix the time for this system\n";
1234
1235 $YesNo = 'n';
1236 $YesNo = 'y' if ( lc($invert_time) eq 'true' );
1237
1238 print "Fix the time for this system (y/n) [$WHT$YesNo$NRM]: $WHT";
1239
1240 $new_invert_time = <STDIN>;
1241 $new_invert_time =~ tr/yn//cd;
1242 return 'true' if ( $new_invert_time eq "y" );
1243 return 'false' if ( $new_invert_time eq "n" );
1244 return $invert_time;
1245 }
1246
1247 sub command111 {
1248 print "This is the delimiter that your IMAP server uses to distinguish between\n";
1249 print "folders. For example, Cyrus uses '.' as the delimiter and a complete\n";
1250 print "folder would look like 'INBOX.Friends.Bob', while UW uses '/' and would\n";
1251 print "look like 'INBOX/Friends/Bob'. Normally this should be left at 'detect'\n";
1252 print "but if you are sure you know what delimiter your server uses, you can\n";
1253 print "specify it here.\n";
1254 print "\nTo have it autodetect the delimiter, set it to 'detect'.\n\n";
1255 print "[$WHT$optional_delimiter$NRM]: $WHT";
1256 $new_optional_delimiter = <STDIN>;
1257
1258 if ( $new_optional_delimiter eq "\n" ) {
1259 $new_optional_delimiter = $optional_delimiter;
1260 } else {
1261 $new_optional_delimiter =~ s/[\r\n]//g;
1262 }
1263 return $new_optional_delimiter;
1264 }
1265 # IMAP authentication type
1266 # Possible values: login, plain, cram-md5, digest-md5
1267 # Now offers to detect supported mechs, assuming server & port are set correctly
1268
1269 sub command112a {
1270 if ($use_imap_tls ne "0") {
1271 # 1. Script does not handle TLS.
1272 # 2. Server does not have to declare all supported authentication mechs when
1273 # STARTTLS is used. Supported mechs are declared only after STARTTLS.
1274 print "Auto-detection of login methods is unavailable when using TLS or STARTTLS.\n";
1275 } else {
1276 print "If you have already set the hostname and port number, I can try to\n";
1277 print "detect the mechanisms your IMAP server supports.\n";
1278 print "I will try to detect CRAM-MD5 and DIGEST-MD5 support. I can't test\n";
1279 print "for \"login\" or \"plain\" without knowing a username and password.\n";
1280 print "Auto-detecting is optional - you can safely say \"n\" here.\n";
1281 print "\nTry to detect supported mechanisms? [y/N]: ";
1282 $inval=<STDIN>;
1283 chomp($inval);
1284 if ($inval =~ /^y\b/i) {
1285 # Yes, let's try to detect.
1286 print "Trying to detect IMAP capabilities...\n";
1287 my $host = $imapServerAddress . ':'. $imapPort;
1288 print "CRAM-MD5:\t";
1289 my $tmp = detect_auth_support('IMAP',$host,'CRAM-MD5');
1290 if (defined($tmp)) {
1291 if ($tmp eq 'YES') {
1292 print "$WHT SUPPORTED$NRM\n";
1293 } else {
1294 print "$WHT NOT SUPPORTED$NRM\n";
1295 }
1296 } else {
1297 print $WHT . " ERROR DETECTING$NRM\n";
1298 }
1299
1300 print "DIGEST-MD5:\t";
1301 $tmp = detect_auth_support('IMAP',$host,'DIGEST-MD5');
1302 if (defined($tmp)) {
1303 if ($tmp eq 'YES') {
1304 print "$WHT SUPPORTED$NRM\n";
1305 } else {
1306 print "$WHT NOT SUPPORTED$NRM\n";
1307 }
1308 } else {
1309 print $WHT . " ERROR DETECTING$NRM\n";
1310 }
1311
1312 }
1313 }
1314 print "\nWhat authentication mechanism do you want to use for IMAP connections?\n\n";
1315 print $WHT . "login" . $NRM . " - Plaintext. If you can do better, you probably should.\n";
1316 print $WHT . "plain" . $NRM . " - SASL PLAIN. If you need this, you already know it.\n";
1317 print $WHT . "cram-md5" . $NRM . " - Slightly better than plaintext methods.\n";
1318 print $WHT . "digest-md5" . $NRM . " - Privacy protection - better than cram-md5.\n";
1319 print "\n*** YOUR IMAP SERVER MUST SUPPORT THE MECHANISM YOU CHOOSE HERE ***\n";
1320 print "If you don't understand or are unsure, you probably want \"login\"\n\n";
1321 print "login, plain, cram-md5, or digest-md5 [$WHT$imap_auth_mech$NRM]: $WHT";
1322 $inval=<STDIN>;
1323 chomp($inval);
1324 if ( ($inval =~ /^cram-md5\b/i) || ($inval =~ /^digest-md5\b/i) || ($inval =~ /^login\b/i) || ($inval =~ /^plain\b/i)) {
1325 return lc($inval);
1326 } else {
1327 # user entered garbage or default value so nothing needs to be set
1328 return $imap_auth_mech;
1329 }
1330 }
1331
1332
1333 # SMTP authentication type
1334 # Possible choices: none, plain, cram-md5, digest-md5
1335 sub command112b {
1336 if ($use_smtp_tls ne "0") {
1337 print "Auto-detection of login methods is unavailable when using TLS or STARTTLS.\n";
1338 } elsif (eval ("use IO::Socket; 1")) {
1339 # try loading IO::Socket module
1340 print "If you have already set the hostname and port number, I can try to\n";
1341 print "automatically detect some of the mechanisms your SMTP server supports.\n";
1342 print "Auto-detection is *optional* - you can safely say \"n\" here.\n";
1343 print "\nTry to detect auth mechanisms? [y/N]: ";
1344 $inval=<STDIN>;
1345 chomp($inval);
1346 if ($inval =~ /^y\b/i) {
1347 # Yes, let's try to detect.
1348 print "Trying to detect supported methods (SMTP)...\n";
1349
1350 # Special case!
1351 # Check none by trying to relay to junk@microsoft.com
1352 $host = $smtpServerAddress . ':' . $smtpPort;
1353 my $sock = IO::Socket::INET->new($host);
1354 print "Testing none:\t\t$WHT";
1355 if (!defined($sock)) {
1356 print " ERROR TESTING\n";
1357 close $sock;
1358 } else {
1359 print $sock "HELO $domain\r\n";
1360 $got = <$sock>; # Discard
1361 print $sock "MAIL FROM:<tester\@squirrelmail.org>\r\n";
1362 $got = <$sock>; # Discard
1363 print $sock "RCPT TO:<junk\@microsoft.com\r\n";
1364 $got = <$sock>; # This is the important line
1365 if ($got =~ /^250\b/) { # SMTP will relay without auth
1366 print "SUPPORTED$NRM\n";
1367 } else {
1368 print "NOT SUPPORTED$NRM\n";
1369 }
1370 print $sock "RSET\r\n";
1371 print $sock "QUIT\r\n";
1372 close $sock;
1373 }
1374 # Try login (SquirrelMail default)
1375 print "Testing login:\t\t";
1376 $tmp=detect_auth_support('SMTP',$host,'LOGIN');
1377 if (defined($tmp)) {
1378 if ($tmp eq 'YES') {
1379 print $WHT . "SUPPORTED$NRM\n";
1380 } else {
1381 print $WHT . "NOT SUPPORTED$NRM\n";
1382 }
1383 } else {
1384 print $WHT . "ERROR DETECTING$NRM\n";
1385 }
1386
1387 # Try CRAM-MD5
1388 print "Testing CRAM-MD5:\t";
1389 $tmp=detect_auth_support('SMTP',$host,'CRAM-MD5');
1390 if (defined($tmp)) {
1391 if ($tmp eq 'YES') {
1392 print $WHT . "SUPPORTED$NRM\n";
1393 } else {
1394 print $WHT . "NOT SUPPORTED$NRM\n";
1395 }
1396 } else {
1397 print $WHT . "ERROR DETECTING$NRM\n";
1398 }
1399
1400
1401 print "Testing DIGEST-MD5:\t";
1402 $tmp=detect_auth_support('SMTP',$host,'DIGEST-MD5');
1403 if (defined($tmp)) {
1404 if ($tmp eq 'YES') {
1405 print $WHT . "SUPPORTED$NRM\n";
1406 } else {
1407 print $WHT . "NOT SUPPORTED$NRM\n";
1408 }
1409 } else {
1410 print $WHT . "ERROR DETECTING$NRM\n";
1411 }
1412 }
1413 }
1414 print "\nWhat authentication mechanism do you want to use for SMTP connections?\n";
1415 print $WHT . "none" . $NRM . " - Your SMTP server does not require authorization.\n";
1416 print $WHT . "login" . $NRM . " - Plaintext. If you can do better, you probably should.\n";
1417 print $WHT . "plain" . $NRM . " - SASL PLAIN. You already know it if you need this.\n";
1418 print $WHT . "cram-md5" . $NRM . " - Slightly better than plaintext.\n";
1419 print $WHT . "digest-md5" . $NRM . " - Privacy protection - better than cram-md5.\n";
1420 print $WHT . "\n*** YOUR SMTP SERVER MUST SUPPORT THE MECHANISM YOU CHOOSE HERE ***\n" . $NRM;
1421 print "If you don't understand or are unsure, you probably want \"none\"\n\n";
1422 print "none, login, cram-md5, or digest-md5 [$WHT$smtp_auth_mech$NRM]: $WHT";
1423 $inval=<STDIN>;
1424 chomp($inval);
1425 if ($inval =~ /^none\b/i) {
1426 # remove sitewide smtp authentication information
1427 $smtp_sitewide_user = '';
1428 $smtp_sitewide_pass = '';
1429 # SMTP doesn't necessarily require logins
1430 return "none";
1431 } elsif ( ($inval =~ /^cram-md5\b/i) || ($inval =~ /^digest-md5\b/i) ||
1432 ($inval =~ /^login\b/i) || ($inval =~/^plain\b/i)) {
1433 command_smtp_sitewide_userpass($inval);
1434 return lc($inval);
1435 } elsif (trim($inval) eq '') {
1436 # user selected default value
1437 command_smtp_sitewide_userpass($smtp_auth_mech);
1438 return $smtp_auth_mech;
1439 } else {
1440 # user entered garbage
1441 return $smtp_auth_mech;
1442 }
1443 }
1444
1445 sub command_smtp_sitewide_userpass($) {
1446 # get first function argument
1447 my $auth_mech = shift(@_);
1448 my $default, $tmp;
1449 $auth_mech = lc(trim($auth_mech));
1450 if ($auth_mech ne 'cram-md5' &&
1451 $auth_mech ne 'digest-md5' &&
1452 $auth_mech ne 'login' &&
1453 $auth_mech ne 'plain') {
1454 return;
1455 }
1456 print "SMTP authentication uses IMAP username and password by default.\n";
1457 print "\n";
1458 print "Would you like to use other login and password for all SquirrelMail \n";
1459 print "SMTP connections?";
1460 if ($smtp_sitewide_user ne '') {
1461 $default = 'y';
1462 print " [Yn]:";
1463 } else {
1464 $default = 'n';
1465 print " [yN]:";
1466 }
1467 $tmp=<STDIN>;
1468 $tmp = trim($tmp);
1469
1470 if ($tmp eq '') {
1471 $tmp = $default;
1472 } else {
1473 $tmp = lc($tmp);
1474 }
1475
1476 if ($tmp eq 'n') {
1477 $smtp_sitewide_user = '';
1478 $smtp_sitewide_pass = '';
1479 } elsif ($tmp eq 'y') {
1480 print "Enter username [$smtp_sitewide_user]:";
1481 my $new_user = <STDIN>;
1482 $new_user = trim($new_user);
1483 if ($new_user ne '') {
1484 $smtp_sitewide_user = $new_user;
1485 }
1486 if ($smtp_sitewide_user ne '') {
1487 print "If you don't enter any password, current sitewide password will be used.\n";
1488 print "If you enter space, password will be set to empty string.\n";
1489 print "Enter password:";
1490 my $new_pass = <STDIN>;
1491 if ($new_pass ne "\n") {
1492 $smtp_sitewide_pass = trim($new_pass);
1493 }
1494 } else {
1495 print "Invalid input. You must set username used for SMTP authentication.\n";
1496 print "Click any key to continue\n";
1497 $tmp = <STDIN>;
1498 }
1499 } else {
1500 print "Invalid input\n";
1501 print "Click any key to continue\n";
1502 $tmp = <STDIN>;
1503 }
1504 }
1505
1506 # Sub adds information about SMTP authentication type to menu
1507 sub display_smtp_sitewide_userpass() {
1508 my $ret = '';
1509 if ($smtp_auth_mech ne 'none') {
1510 if ($smtp_sitewide_user ne '') {
1511 $ret = ' (with custom username and password)';
1512 } else {
1513 $ret = ' (with IMAP username and password)';
1514 }
1515 }
1516 return $ret;
1517 }
1518
1519 # TLS
1520 # This sub is reused for IMAP and SMTP
1521 # Args: service name, default value
1522 sub command_use_tls {
1523 my($default_val,$service,$inval);
1524 $service=$_[0];
1525 $default_val=$_[1];
1526 print "TLS (Transport Layer Security) encrypts the traffic between server and client.\n";
1527 print "STARTTLS extensions allow to start encryption on existing plain text connection.\n";
1528 print "These options add specific PHP and IMAP server configuration requirements.\n";
1529 print "See SquirrelMail documentation about connection security.\n";
1530 print "\n";
1531 print "If your " . $service . " server is localhost, you can safely disable this.\n";
1532 print "If it is remote, you may wish to seriously consider enabling this.\n";
1533 $valid_input=0;
1534 while ($valid_input eq 0) {
1535 print "\nSelect connection security model:\n";
1536 print " 0 - Use plain text connection\n";
1537 print " 1 - Use TLS connection\n";
1538 print " 2 - Use STARTTLS extension\n";
1539 print "Select [$default_val]: ";
1540 $inval=<STDIN>;
1541 $inval=trim($inval);
1542 if ($inval =~ /^[012]$/ || $inval eq '') {
1543 $valid_input = 1;
1544 }
1545 }
1546 if ($inval ne '') {$default_val = $inval};
1547 return $default_val;
1548 }
1549
1550 # This sub is used to display human readable text for
1551 # $use_imap_tls and $use_smtp_tls values in conf.pl menu
1552 sub display_use_tls($) {
1553 my $val = shift(@_);
1554 my $ret = 'disabled';
1555 if ($val eq '2') {
1556 $ret = 'STARTTLS';
1557 } elsif ($val eq '1') {
1558 $ret = 'TLS';
1559 }
1560 return $ret;
1561 }
1562
1563 # $encode_header_key
1564 sub command114{
1565 print "Encryption key allows to hide SquirrelMail Received: headers\n";
1566 print "in outbound messages. Interface uses encryption key to encode\n";
1567 print "username, remote address and proxied address, then stores encoded\n";
1568 print "information in X-Squirrel-* headers.\n";
1569 print "\n";
1570 print "Warning: used encryption function is not bulletproof. When used\n";
1571 print "with static encryption keys, it provides only minimal security\n";
1572 print "measures and information can be decoded quickly.\n";
1573 print "\n";
1574 print "Encoded information can be decoded with decrypt_headers.php script\n";
1575 print "from SquirrelMail contrib/ directory.\n";
1576 print "\n";
1577 print "Enter encryption key: ";
1578 $new_encode_header_key = <STDIN>;
1579 if ( $new_encode_header_key eq "\n" ) {
1580 $new_encode_header_key = $encode_header_key;
1581 } else {
1582 $new_encode_header_key =~ s/[\r\n]//g;
1583 }
1584 return $new_encode_header_key;
1585 }
1586
1587 # MOTD
1588 sub command71 {
1589 print "\nYou can now create the welcome message that is displayed\n";
1590 print "every time a user logs on. You can use HTML or just plain\n";
1591 print
1592 "text. If you do not wish to have one, just make it blank.\n\n(Type @ on a blank line to exit)\n";
1593
1594 $new_motd = "";
1595 do {
1596 print "] ";
1597 $line = <STDIN>;
1598 $line =~ s/[\r\n]//g;
1599 if ( $line ne "@" ) {
1600 $line =~ s/ /\&nbsp;\&nbsp;/g;
1601 $line =~ s/\t/\&nbsp;\&nbsp;\&nbsp;\&nbsp;/g;
1602 $line =~ s/$/ /;
1603 $line =~ s/\"/\\\"/g;
1604
1605 $new_motd = $new_motd . $line;
1606 }
1607 } while ( $line ne "@" );
1608 return $new_motd;
1609 }
1610
1611 ################# PLUGINS ###################
1612
1613 sub command81 {
1614 $command =~ s/[\s\n\r]*//g;
1615 if ( $command > 0 ) {
1616 $command = $command - 1;
1617 if ( $command <= $#plugins ) {
1618 @newplugins = ();
1619 $ct = 0;
1620 while ( $ct <= $#plugins ) {
1621 if ( $ct != $command ) {
1622 @newplugins = ( @newplugins, $plugins[$ct] );
1623 }
1624 $ct++;
1625 }
1626 @plugins = @newplugins;
1627 } elsif ( $command <= $#plugins + $#unused_plugins + 1 ) {
1628 $num = $command - $#plugins - 1;
1629 @newplugins = @plugins;
1630 $ct = 0;
1631 while ( $ct <= $#unused_plugins ) {
1632 if ( $ct == $num ) {
1633 @newplugins = ( @newplugins, $unused_plugins[$ct] );
1634 }
1635 $ct++;
1636 }
1637 @plugins = @newplugins;
1638 }
1639 }
1640 return @plugins;
1641 }
1642
1643 ################# FOLDERS ###################
1644
1645 # default_folder_prefix
1646 sub command21 {
1647 print "Some IMAP servers (UW, for example) store mail and folders in\n";
1648 print "your user space in a separate subdirectory. This is where you\n";
1649 print "specify what that directory is.\n";
1650 print "\n";
1651 print "EXAMPLE: mail/";
1652 print "\n";
1653 print "NOTE: If you use Cyrus, or some server that would not use this\n";
1654 print " option, you must set this to 'none'.\n";
1655 print "\n";
1656 print "[$WHT$default_folder_prefix$NRM]: $WHT";
1657 $new_default_folder_prefix = <STDIN>;
1658
1659 if ( $new_default_folder_prefix eq "\n" ) {
1660 $new_default_folder_prefix = $default_folder_prefix;
1661 } else {
1662 $new_default_folder_prefix =~ s/[\r\n]//g;
1663 }
1664 if ( ( $new_default_folder_prefix =~ /^\s*$/ ) || ( $new_default_folder_prefix =~ m/^none$/i ) ) {
1665 $new_default_folder_prefix = "";
1666 } else {
1667 # add the trailing delimiter only if we know what the server is.
1668 if (($imap_server_type eq 'cyrus' and
1669 $optional_delimiter eq 'detect') or
1670 ($imap_server_type eq 'courier' and
1671 $optional_delimiter eq 'detect')) {
1672 $new_default_folder_prefix =~ s/\.*$/\./;
1673 } elsif ($imap_server_type eq 'uw' and
1674 $optional_delimiter eq 'detect') {
1675 $new_default_folder_prefix =~ s/\/*$/\//;
1676 }
1677 }
1678 return $new_default_folder_prefix;
1679 }
1680
1681 # Show Folder Prefix
1682 sub command22 {
1683 print "It is possible to set up the default folder prefix as a user\n";
1684 print "specific option, where each user can specify what their mail\n";
1685 print "folder is. If you set this to false, they will never see the\n";
1686 print "option, but if it is true, this option will appear in the\n";
1687 print "'options' section.\n";
1688 print "\n";
1689 print "NOTE: You set the default folder prefix in option '1' of this\n";
1690 print " section. That will be the default if the user doesn't\n";
1691 print " specify anything different.\n";
1692 print "\n";
1693
1694 if ( lc($show_prefix_option) eq 'true' ) {
1695 $default_value = "y";
1696 } else {
1697 $default_value = "n";
1698 }
1699 print "\n";
1700 print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
1701 $new_show = <STDIN>;
1702 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1703 $show_prefix_option = 'true';
1704 } else {
1705 $show_prefix_option = 'false';
1706 }
1707 return $show_prefix_option;
1708 }
1709
1710 # Trash Folder
1711 sub command23a {
1712 print "You can now specify where the default trash folder is located.\n";
1713 print "On servers where you do not want this, you can set it to anything\n";
1714 print "and set option 6 to false.\n";
1715 print "\n";
1716 print "This is relative to where the rest of your email is kept. You do\n";
1717 print "not need to worry about their mail directory. If this folder\n";
1718 print "would be ~/mail/trash on the filesystem, you only need to specify\n";
1719 print "that this is 'trash', and be sure to put 'mail/' in option 1.\n";
1720 print "\n";
1721
1722 print "[$WHT$trash_folder$NRM]: $WHT";
1723 $new_trash_folder = <STDIN>;
1724 if ( $new_trash_folder eq "\n" ) {
1725 $new_trash_folder = $trash_folder;
1726 } else {
1727 if (check_imap_folder($new_trash_folder)) {
1728 $new_trash_folder =~ s/[\r\n]//g;
1729 } else {
1730 $new_trash_folder = $trash_folder;
1731 }
1732 }
1733 return $new_trash_folder;
1734 }
1735
1736 # Sent Folder
1737 sub command23b {
1738 print "This is where messages that are sent will be stored. SquirrelMail\n";
1739 print "by default puts a copy of all outgoing messages in this folder.\n";
1740 print "\n";
1741 print "This is relative to where the rest of your email is kept. You do\n";
1742 print "not need to worry about their mail directory. If this folder\n";
1743 print "would be ~/mail/sent on the filesystem, you only need to specify\n";
1744 print "that this is 'sent', and be sure to put 'mail/' in option 1.\n";
1745 print "\n";
1746
1747 print "[$WHT$sent_folder$NRM]: $WHT";
1748 $new_sent_folder = <STDIN>;
1749 if ( $new_sent_folder eq "\n" ) {
1750 $new_sent_folder = $sent_folder;
1751 } else {
1752 if (check_imap_folder($new_sent_folder)) {
1753 $new_sent_folder =~ s/[\r\n]//g;
1754 } else {
1755 $new_sent_folder = $sent_folder;
1756 }
1757 }
1758 return $new_sent_folder;
1759 }
1760
1761 # Draft Folder
1762 sub command23c {
1763 print "You can now specify where the default draft folder is located.\n";
1764 print "On servers where you do not want this, you can set it to anything\n";
1765 print "and set option 9 to false.\n";
1766 print "\n";
1767 print "This is relative to where the rest of your email is kept. You do\n";
1768 print "not need to worry about their mail directory. If this folder\n";
1769 print "would be ~/mail/drafts on the filesystem, you only need to specify\n";
1770 print "that this is 'drafts', and be sure to put 'mail/' in option 1.\n";
1771 print "\n";
1772
1773 print "[$WHT$draft_folder$NRM]: $WHT";
1774 $new_draft_folder = <STDIN>;
1775 if ( $new_draft_folder eq "\n" ) {
1776 $new_draft_folder = $draft_folder;
1777 } else {
1778 if (check_imap_folder($new_draft_folder)) {
1779 $new_draft_folder =~ s/[\r\n]//g;
1780 } else {
1781 $new_draft_folder = $draft_folder;
1782 }
1783 }
1784 return $new_draft_folder;
1785 }
1786
1787 # default move to trash
1788 sub command24a {
1789 print "By default, should messages get moved to the trash folder? You\n";
1790 print "can specify the default trash folder in option 3. If this is set\n";
1791 print "to false, messages will get deleted immediately without moving\n";
1792 print "to the trash folder.\n";
1793 print "\n";
1794 print "Trash folder is currently: $trash_folder\n";
1795 print "\n";
1796
1797 if ( lc($default_move_to_trash) eq 'true' ) {
1798 $default_value = "y";
1799 } else {
1800 $default_value = "n";
1801 }
1802 print "By default, move to trash (y/n) [$WHT$default_value$NRM]: $WHT";
1803 $new_show = <STDIN>;
1804 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1805 $default_move_to_trash = 'true';
1806 } else {
1807 $default_move_to_trash = 'false';
1808 }
1809 return $default_move_to_trash;
1810 }
1811
1812 # default move to sent
1813 sub command24b {
1814 print "By default, should messages get moved to the sent folder? You\n";
1815 print "can specify the default sent folder in option 4. If this is set\n";
1816 print "to false, messages will get sent and no copy will be made.\n";
1817 print "\n";
1818 print "Sent folder is currently: $sent_folder\n";
1819 print "\n";
1820
1821 if ( lc($default_move_to_sent) eq 'true' ) {
1822 $default_value = "y";
1823 } else {
1824 $default_value = "n";
1825 }
1826 print "By default, move to sent (y/n) [$WHT$default_value$NRM]: $WHT";
1827 $new_show = <STDIN>;
1828 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1829 $default_move_to_sent = 'true';
1830 } else {
1831 $default_move_to_sent = 'false';
1832 }
1833 return $default_move_to_sent;
1834 }
1835
1836 # default save as draft
1837 sub command24c {
1838 print "By default, should the save to draft option be shown? You can\n";
1839 print "specify the default drafts folder in option 5. If this is set\n";
1840 print "to false, users will not be shown the save to draft option.\n";
1841 print "\n";
1842 print "Drafts folder is currently: $draft_folder\n";
1843 print "\n";
1844
1845 if ( lc($default_move_to_draft) eq 'true' ) {
1846 $default_value = "y";
1847 } else {
1848 $default_value = "n";
1849 }
1850 print "By default, save as draft (y/n) [$WHT$default_value$NRM]: $WHT";
1851 $new_show = <STDIN>;
1852 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1853 $default_save_as_draft = 'true';
1854 } else {
1855 $default_save_as_draft = 'false';
1856 }
1857 return $default_save_as_draft;
1858 }
1859
1860 # List special folders first
1861 sub command27 {
1862 print "SquirrelMail has what we call 'special folders' that are not\n";
1863 print "manipulated and viewed like normal folders. Some examples of\n";
1864 print "these folders would be INBOX, Trash, Sent, etc. This option\n";
1865 print "Simply asks if you want these folders listed first in the folder\n";
1866 print "listing.\n";
1867 print "\n";
1868
1869 if ( lc($list_special_folders_first) eq 'true' ) {
1870 $default_value = "y";
1871 } else {
1872 $default_value = "n";
1873 }
1874 print "\n";
1875 print "List first (y/n) [$WHT$default_value$NRM]: $WHT";
1876 $new_show = <STDIN>;
1877 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1878 $list_special_folders_first = 'true';
1879 } else {
1880 $list_special_folders_first = 'false';
1881 }
1882 return $list_special_folders_first;
1883 }
1884
1885 # Show special folders color
1886 sub command28 {
1887 print "SquirrelMail has what we call 'special folders' that are not\n";
1888 print "manipulated and viewed like normal folders. Some examples of\n";
1889 print "these folders would be INBOX, Trash, Sent, etc. This option\n";
1890 print "wants to know if we should display special folders in a\n";
1891 print "color than the other folders.\n";
1892 print "\n";
1893
1894 if ( lc($use_special_folder_color) eq 'true' ) {
1895 $default_value = "y";
1896 } else {
1897 $default_value = "n";
1898 }
1899 print "\n";
1900 print "Show color (y/n) [$WHT$default_value$NRM]: $WHT";
1901 $new_show = <STDIN>;
1902 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1903 $use_special_folder_color = 'true';
1904 } else {
1905 $use_special_folder_color = 'false';
1906 }
1907 return $use_special_folder_color;
1908 }
1909
1910 # Auto expunge
1911 sub command29 {
1912 print "The way that IMAP handles deleting messages is as follows. You\n";
1913 print "mark the message as deleted, and then to 'really' delete it, you\n";
1914 print "expunge it. This option asks if you want to just have messages\n";
1915 print "marked as deleted, or if you want SquirrelMail to expunge the \n";
1916 print "messages too.\n";
1917 print "\n";
1918
1919 if ( lc($auto_expunge) eq 'true' ) {
1920 $default_value = "y";
1921 } else {
1922 $default_value = "n";
1923 }
1924 print "Auto expunge (y/n) [$WHT$default_value$NRM]: $WHT";
1925 $new_show = <STDIN>;
1926 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1927 $auto_expunge = 'true';
1928 } else {
1929 $auto_expunge = 'false';
1930 }
1931 return $auto_expunge;
1932 }
1933
1934 # Default sub of inbox
1935 sub command210 {
1936 print "Some IMAP servers (Cyrus) have all folders as subfolders of INBOX.\n";
1937 print "This can cause some confusion in folder creation for users when\n";
1938 print "they try to create folders and don't put it as a subfolder of INBOX\n";
1939 print "and get permission errors. This option asks if you want folders\n";
1940 print "to be subfolders of INBOX by default.\n";
1941 print "\n";
1942
1943 if ( lc($default_sub_of_inbox) eq 'true' ) {
1944 $default_value = "y";
1945 } else {
1946 $default_value = "n";
1947 }
1948 print "Default sub of INBOX (y/n) [$WHT$default_value$NRM]: $WHT";
1949 $new_show = <STDIN>;
1950 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1951 $default_sub_of_inbox = 'true';
1952 } else {
1953 $default_sub_of_inbox = 'false';
1954 }
1955 return $default_sub_of_inbox;
1956 }
1957
1958 # Show contain subfolder option
1959 sub command211 {
1960 print "Some IMAP servers (UW) make it so that there are two types of\n";
1961 print "folders. Those that contain messages, and those that contain\n";
1962 print "subfolders. If this is the case for your server, set this to\n";
1963 print "true, and it will ask the user whether the folder they are\n";
1964 print "creating contains subfolders or messages.\n";
1965 print "\n";
1966
1967 if ( lc($show_contain_subfolders_option) eq 'true' ) {
1968 $default_value = "y";
1969 } else {
1970 $default_value = "n";
1971 }
1972 print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
1973 $new_show = <STDIN>;
1974 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1975 $show_contain_subfolders_option = 'true';
1976 } else {
1977 $show_contain_subfolders_option = 'false';
1978 }
1979 return $show_contain_subfolders_option;
1980 }
1981
1982 # Default Unseen Notify
1983 sub command212 {
1984 print "This option specifies where the users will receive notification\n";
1985 print "about unseen messages by default. This is of course an option that\n";
1986 print "can be changed on a user level.\n";
1987 print " 1 = No notification\n";
1988 print " 2 = Only on the INBOX\n";
1989 print " 3 = On all folders\n";
1990 print "\n";
1991
1992 print "Which one should be default (1,2,3)? [$WHT$default_unseen_notify$NRM]: $WHT";
1993 $new_show = <STDIN>;
1994 if ( $new_show =~ /^[123]\n/i ) {
1995 $default_unseen_notify = $new_show;
1996 }
1997 $default_unseen_notify =~ s/[\r\n]//g;
1998 return $default_unseen_notify;
1999 }
2000
2001 # Default Unseen Type
2002 sub command213 {
2003 print "Here you can define the default way that unseen messages will be displayed\n";
2004 print "to the user in the folder listing on the left side.\n";
2005 print " 1 = Only unseen messages (4)\n";
2006 print " 2 = Unseen and Total messages (4/27)\n";
2007 print "\n";
2008
2009 print "Which one should be default (1,2)? [$WHT$default_unseen_type$NRM]: $WHT";
2010 $new_show = <STDIN>;
2011 if ( $new_show =~ /^[12]\n/i ) {
2012 $default_unseen_type = $new_show;
2013 }
2014 $default_unseen_type =~ s/[\r\n]//g;
2015 return $default_unseen_type;
2016 }
2017
2018 # Auto create special folders
2019 sub command214 {
2020 print "Would you like the Sent, Trash, and Drafts folders to be created\n";
2021 print "automatically print for you when a user logs in? If the user\n";
2022 print "accidentally deletes their special folders, this option will\n";
2023 print "automatically create it again for them.\n";
2024 print "\n";
2025
2026 if ( lc($auto_create_special) eq 'true' ) {
2027 $default_value = "y";
2028 } else {
2029 $default_value = "n";
2030 }
2031 print "Auto create special folders? (y/n) [$WHT$default_value$NRM]: $WHT";
2032 $new_show = <STDIN>;
2033 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2034 $auto_create_special = 'true';
2035 } else {
2036 $auto_create_special = 'false';
2037 }
2038 return $auto_create_special;
2039 }
2040
2041 # Automatically delete folders
2042 sub command215 {
2043 if ( $imap_server_type eq "uw" ) {
2044 print "UW IMAP servers will not allow folders containing mail to also contain folders.\n";
2045 print "Deleting folders will bypass the trash folder and be immediately deleted\n\n";
2046 print "If this is not the correct value for your server,\n";
2047 print "please use option D on the Main Menu to configure your server correctly.\n\n";
2048 print "Press any key to continue...\n";
2049 $new_delete = <STDIN>;
2050 $delete_folder = 'true';
2051 } else {
2052 if ( $imap_server_type eq "courier" ) {
2053 print "Courier (or Courier-IMAP) IMAP servers may not support ";
2054 print "subfolders of Trash. \n";
2055 print "Specifically, if Courier is set to always move messages to Trash, \n";
2056 print "Trash will be treated by Courier as a special folder that does not \n";
2057 print "allow subfolders. \n\n";
2058 print "Please verify your Courier configuration, and test folder deletion \n";
2059 print "when changing this setting.\n\n";
2060 }
2061
2062 print "Are subfolders of the Trash supported by your IMAP server?\n";
2063 print "If so, should deleted folders be sent to Trash?\n";
2064 print "If not, say no (deleted folders should not be sent to Trash)\n\n";
2065 # reversal of logic.
2066 # question was: Should folders be automatically deleted instead of sent to trash..
2067 # we've changed the question to make it more clear,
2068 # and are here handling that to avoid changing the answers..
2069 if ( lc($delete_folder) eq 'true' ) {
2070 $default_value = "n";
2071 } else {
2072 $default_value = "y";
2073 }
2074 print "Send deleted folders to Trash? (y/n) [$WHT$default_value$NRM]: $WHT";
2075 $new_delete = <STDIN>;
2076 if ( ( $new_delete =~ /^y\n/i ) || ( ( $new_delete =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2077 $delete_folder = 'false';
2078 } else {
2079 $delete_folder = 'true';
2080 }
2081 }
2082 return $delete_folder;
2083 }
2084
2085 #noselect fix
2086 sub command216 {
2087 print "Some IMAP server allow subfolders to exist even if the parent\n";
2088 print "folders do not. This fixes some problems with the folder list\n";
2089 print "when this is the case, causing the /NoSelect folders to be displayed\n";
2090 print "\n";
2091
2092 if ( lc($noselect_fix_enable) eq 'true' ) {
2093 $default_value = "y";
2094 } else {
2095 $default_value = "n";
2096 }
2097 print "enable noselect fix? (y/n) [$WHT$noselect_fix_enable$NRM]: $WHT";
2098 $noselect_fix_enable = <STDIN>;
2099 if ( ( $noselect_fix_enable =~ /^y\n/i ) || ( ( $noselect_fix_enable =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2100 $noselect_fix_enable = 'true';
2101 } else {
2102 $noselect_fix_enable = 'false';
2103 }
2104 return $noselect_fix_enable;
2105 }
2106 ############# GENERAL OPTIONS #####################
2107
2108 # Data directory
2109 sub command33a {
2110 print "Specify the location for your data directory.\n";
2111 print "You need to create this directory yourself.\n";
2112 print "The path name can be absolute or relative (to the config directory).\n";
2113 print "Here are two examples:\n";
2114 print " Absolute: /var/local/squirrelmail/data/\n";
2115 print " Relative: ../data/\n";
2116 print "Relative paths to directories outside of the SquirrelMail distribution\n";
2117 print "will be converted to their absolute path equivalents in config.php.\n\n";
2118 print "Note: There are potential security risks with having a writeable directory\n";
2119 print "under the web server's root directory (ex: /home/httpd/html).\n";
2120 print "For this reason, it is recommended to put the data directory\n";
2121 print "in an alternate location of your choice. \n";
2122 print "\n";
2123
2124 print "[$WHT$data_dir$NRM]: $WHT";
2125 $new_data_dir = <STDIN>;
2126 if ( $new_data_dir eq "\n" ) {
2127 $new_data_dir = $data_dir;
2128 } else {
2129 $new_data_dir =~ s/[\r\n]//g;
2130 }
2131 if ( $new_data_dir =~ /^\s*$/ ) {
2132 $new_data_dir = "";
2133 } else {
2134 $new_data_dir =~ s/\/*$//g;
2135 $new_data_dir =~ s/$/\//g;
2136 }
2137 return $new_data_dir;
2138 }
2139
2140 # Attachment directory
2141 sub command33b {
2142 print "Path to directory used for storing attachments while a mail is\n";
2143 print "being composed. The path name can be absolute or relative (to the\n";
2144 print "config directory). Here are two examples:\n";
2145 print " Absolute: /var/local/squirrelmail/attach/\n";
2146 print " Relative: ../attach/\n";
2147 print "Relative paths to directories outside of the SquirrelMail distribution\n";
2148 print "will be converted to their absolute path equivalents in config.php.\n\n";
2149 print "Note: There are a few security considerations regarding this\n";
2150 print "directory:\n";
2151 print " 1. It should have the permission 733 (rwx-wx-wx) to make it\n";
2152 print " impossible for a random person with access to the webserver\n";
2153 print " to list files in this directory. Confidential data might\n";
2154 print " be laying around in there.\n";
2155 print " Depending on your user:group assignments, 730 (rwx-wx---)\n";
2156 print " may be possible, and more secure (e.g. root:apache)\n";
2157 print " 2. Since the webserver is not able to list the files in the\n";
2158 print " content is also impossible for the webserver to delete files\n";
2159 print " lying around there for too long.\n";
2160 print " 3. It should probably be another directory than the data\n";
2161 print " directory specified in option 3.\n";
2162 print "\n";
2163
2164 print "[$WHT$attachment_dir$NRM]: $WHT";
2165 $new_attachment_dir = <STDIN>;
2166 if ( $new_attachment_dir eq "\n" ) {
2167 $new_attachment_dir = $attachment_dir;
2168 } else {
2169 $new_attachment_dir =~ s/[\r\n]//g;
2170 }
2171 if ( $new_attachment_dir =~ /^\s*$/ ) {
2172 $new_attachment_dir = "";
2173 } else {
2174 $new_attachment_dir =~ s/\/*$//g;
2175 $new_attachment_dir =~ s/$/\//g;
2176 }
2177 return $new_attachment_dir;
2178 }
2179
2180 sub command33c {
2181 print "The directory hash level setting allows you to configure the level\n";
2182 print "of hashing that SquirrelMail employs in your data and attachment\n";
2183 print "directories. This value must be an integer ranging from 0 to 4.\n";
2184 print "When this value is set to 0, SquirrelMail will simply store all\n";
2185 print "files as normal in the data and attachment directories. However,\n";
2186 print "when set to a value from 1 to 4, a simple hashing scheme will be\n";
2187 print "used to organize the files in this directory. In short, the crc32\n";
2188 print "value for a username will be computed. Then, up to the first 4\n";
2189 print "digits of the hash, as set by this configuration value, will be\n";
2190 print "used to directory hash the files for that user in the data and\n";
2191 print "attachment directory. This allows for better performance on\n";
2192 print "servers with larger numbers of users.\n";
2193 print "\n";
2194
2195 print "[$WHT$dir_hash_level$NRM]: $WHT";
2196 $new_dir_hash_level = <STDIN>;
2197 if ( $new_dir_hash_level eq "\n" ) {
2198 $new_dir_hash_level = $dir_hash_level;
2199 } else {
2200 $new_dir_hash_level =~ s/[\r\n]//g;
2201 }
2202 if ( ( int($new_dir_hash_level) < 0 )
2203 || ( int($new_dir_hash_level) > 4 )
2204 || !( int($new_dir_hash_level) eq $new_dir_hash_level ) ) {
2205 print "Invalid Directory Hash Level.\n";
2206 print "Value must be an integer ranging from 0 to 4\n";
2207 print "Hit enter to continue.\n";
2208 $enter_key = <STDIN>;
2209
2210 $new_dir_hash_level = $dir_hash_level;
2211 }
2212
2213 return $new_dir_hash_level;
2214 }
2215
2216 sub command35 {
2217 print "This is the default size (in pixels) of the left folder list.\n";
2218 print "Default is 200, but you can set it to whatever you wish. This\n";
2219 print "is a user preference, so this will only show up as their default.\n";
2220 print "\n";
2221 print "[$WHT$default_left_size$NRM]: $WHT";
2222 $new_default_left_size = <STDIN>;
2223 if ( $new_default_left_size eq "\n" ) {
2224 $new_default_left_size = $default_left_size;
2225 } else {
2226 $new_default_left_size =~ s/[\r\n]//g;
2227 }
2228 return $new_default_left_size;
2229 }
2230
2231 sub command36 {
2232 print "Some IMAP servers only have lowercase letters in the usernames\n";
2233 print "but they still allow people with uppercase to log in. This\n";
2234 print "causes a problem with the user's preference files. This option\n";
2235 print "transparently changes all usernames to lowercase.";
2236 print "\n";
2237
2238 if ( lc($force_username_lowercase) eq 'true' ) {
2239 $default_value = "y";
2240 } else {
2241 $default_value = "n";
2242 }
2243 print "Convert usernames to lowercase (y/n) [$WHT$default_value$NRM]: $WHT";
2244 $new_show = <STDIN>;
2245 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2246 return 'true';
2247 }
2248 return 'false';
2249 }
2250
2251 sub command37 {
2252 print "";
2253 print "\n";
2254
2255 if ( lc($default_use_priority) eq 'true' ) {
2256 $default_value = "y";
2257 } else {
2258 $default_value = "n";
2259 }
2260
2261 print "Allow users to specify priority of outgoing mail (y/n) [$WHT$default_value$NRM]: $WHT";
2262 $new_show = <STDIN>;
2263 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2264 return 'true';
2265 }
2266 return 'false';
2267 }
2268
2269 sub command38 {
2270 print "";
2271 print "\n";
2272
2273 if ( lc($default_hide_attribution) eq 'true' ) {
2274 $default_value = "y";
2275 } else {
2276 $default_value = "n";
2277 }
2278
2279 print "Hide SM attributions (y/n) [$WHT$default_value$NRM]: $WHT";
2280 $new_show = <STDIN>;
2281 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2282 return 'true';
2283 }
2284 return 'false';
2285 }
2286
2287 sub command39 {
2288 print "";
2289 print "\n";
2290
2291 if ( lc($default_use_mdn) eq 'true' ) {
2292 $default_value = "y";
2293 } else {
2294 $default_value = "n";
2295 }
2296
2297 print "Enable support for read/delivery receipt support (y/n) [$WHT$default_value$NRM]: $WHT";
2298 $new_show = <STDIN>;
2299 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2300 return 'true';
2301 }
2302 return 'false';
2303 }
2304
2305
2306 sub command310 {
2307 print " In loosely managed environments, you may want to allow users
2308 to edit their full name and email address. In strictly managed
2309 environments, you may want to force users to use the name
2310 and email address assigned to them.
2311
2312 'y' - allow a user to edit their full name and email address,
2313 'n' - users must use the assigned values.
2314
2315 ";
2316
2317 if ( lc($edit_identity) eq 'true' ) {
2318 $default_value = "y";
2319 } else {
2320 $default_value = "n";
2321 }
2322 print "Allow editing of user's identity? (y/n) [$WHT$default_value$NRM]: $WHT";
2323 $new_edit = <STDIN>;
2324 if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2325 $edit_identity = 'true';
2326 $edit_name = 'true';
2327 $hide_auth_header = command311b();
2328 } else {
2329 $edit_identity = 'false';
2330 $edit_name = command311();
2331 $hide_auth_header = command311b();
2332 }
2333 return $edit_identity;
2334 }
2335
2336 sub command311 {
2337 print " Given that users are not allowed to modify their
2338 email address, can they edit their full name?
2339
2340 ";
2341
2342 if ( lc($edit_name) eq 'true' ) {
2343 $default_value = "y";
2344 } else {
2345 $default_value = "n";
2346 }
2347 print "Allow the user to edit their full name? (y/n) [$WHT$default_value$NRM]: $WHT";
2348 $new_edit = <STDIN>;
2349 if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2350 $edit_name = 'true';
2351 } else {
2352 $edit_name = 'false';
2353 }
2354 return $edit_name;
2355 }
2356
2357 sub command311b {
2358 print " SquirrelMail adds username information to every sent email
2359 in order to prevent possible sender forging when users are allowed
2360 to change their email and/or full name.
2361
2362 You can remove user information from this header (y), if you think that
2363 it violates privacy or security.
2364
2365 Note: If users are allowed to change their email addresses,
2366 this setting will make it difficult to determine who sent what where.
2367 Use at your own risk.
2368
2369 ";
2370
2371 if ( lc($hide_auth_header) eq "true" ) {
2372 $default_value = "y";
2373 } else {
2374 $default_value = "n";
2375 }
2376 print "Remove username from email headers? (y/n) [$WHT$default_value$NRM]: $WHT";
2377 $new_header = <STDIN>;
2378 if ( ( $new_header =~ /^y\n/i ) || ( ( $new_header =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2379 $hide_auth_header = "true";
2380 } else {
2381 $hide_auth_header = "false";
2382 }
2383 return $hide_auth_header;
2384 }
2385
2386 sub command312 {
2387 print "This option allows you to disable server side thread sorting if your server \n";
2388 print "declares THREAD support, but you don't want to provide threading options \n";
2389 print "to end users or THREAD extension is broken or extension does not work with \n";
2390 print "options used by SquirrelMail. Option is not used, if THREAD extension is \n";
2391 print "not declared in IMAP CAPABILITY.\n";
2392 print "\n";
2393
2394 if ( lc($disable_thread_sort) eq 'true' ) {
2395 $default_value = "y";
2396 } else {
2397 $default_value = "n";
2398 }
2399 print "Disable server side thread sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
2400 $disable_thread_sort = <STDIN>;
2401 if ( ( $disable_thread_sort =~ /^y\n/i ) || ( ( $disable_thread_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2402 $disable_thread_sort = 'true';
2403 } else {
2404 $disable_thread_sort = 'false';
2405 }
2406 return $disable_thread_sort;
2407 }
2408
2409 sub command313 {
2410 print "This option allows you to disable server side sorting if your server declares \n";
2411 print "SORT support, but SORT extension is broken or does not work with options \n";
2412 print "used by SquirrelMail. Option is not used, if SORT extension is not declared \n";
2413 print "in IMAP CAPABILITY.\n";
2414 print "\n";
2415 print "It is strongly recommended to keep server side sorting enabled, if your ";
2416 print "IMAP server supports it.";
2417 print "\n";
2418
2419 if ( lc($disable_server_sort) eq 'true' ) {
2420 $default_value = "y";
2421 } else {
2422 $default_value = "n";
2423 }
2424 print "Disable server-side sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
2425 $disable_server_sort = <STDIN>;
2426 if ( ( $disable_server_sort =~ /^y\n/i ) || ( ( $disable_server_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2427 $disable_server_sort = 'true';
2428 } else {
2429 $disable_server_sort = 'false';
2430 }
2431 return $disable_server_sort;
2432 }
2433
2434 sub command314 {
2435 print "This option allows you to choose if SM uses charset search\n";
2436 print "Your IMAP server must support the SEARCH CHARSET command for this to work\n";
2437 print "\n";
2438
2439 if ( lc($allow_charset_search) eq 'true' ) {
2440 $default_value = "y";
2441 } else {
2442 $default_value = "n";
2443 }
2444 print "Allow charset searching? (y/n) [$WHT$default_value$NRM]: $WHT";
2445 $allow_charset_search = <STDIN>;
2446 if ( ( $allow_charset_search =~ /^y\n/i ) || ( ( $allow_charset_search =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2447 $allow_charset_search = 'true';
2448 } else {
2449 $allow_charset_search = 'false';
2450 }
2451 return $allow_charset_search;
2452 }
2453
2454 # command315 (UID support) obsoleted.
2455
2456 # advanced search option
2457 sub command316 {
2458 print "This option allows you to control the use of advanced search form.\n";
2459 print " 0 = enable basic search only\n";
2460 print " 1 = enable advanced search only\n";
2461 print " 2 = enable both\n";
2462 print "\n";
2463
2464 print "Allowed search (0,1,2)? [$WHT$allow_advanced_search$NRM]: $WHT";
2465 $new_allow_advanced_search = <STDIN>;
2466 if ( $new_allow_advanced_search =~ /^[012]\n/i ) {
2467 $allow_advanced_search = $new_allow_advanced_search;
2468 }
2469 $allow_advanced_search =~ s/[\r\n]//g;
2470 return $allow_advanced_search;
2471 }
2472
2473
2474 sub command317 {
2475 print "This option allows you to change the name of the PHP session used\n";
2476 print "by SquirrelMail. Unless you know what you are doing, you probably\n";
2477 print "don't need or want to change this from the default of SQMSESSID.\n";
2478 print "[$WHT$session_name$NRM]: $WHT";
2479 $new_session_name = <STDIN>;
2480 chomp($new_session_name);
2481 if ( $new_session_name eq "" ) {
2482 $new_session_name = $session_name;
2483 }
2484 return $new_session_name;
2485 }
2486
2487 # time zone config (since 1.5.1)
2488 sub command318 {
2489 print "This option allows you to control the use of time zones.\n";
2490 print " 0 = (default) standard, GNU C time zone names\n";
2491 print " 1 = strict, generic time zone codes with offsets\n";
2492 print " 2 = custom, GNU C time zones loaded from config/timezones.php\n";
2493 print " 3 = custom strict, generic time zone codes with offsets loaded \n";
2494 print " from config/timezones.php\n";
2495 print "See SquirrelMail documentation about format of config/timezones.php file.\n";
2496 print "\n";
2497
2498 print "Used time zone configuration (0,1,2,3)? [$WHT$time_zone_type$NRM]: $WHT";
2499 $new_time_zone_type = <STDIN>;
2500 if ( $new_time_zone_type =~ /^[0123]\n/i ) {
2501 $time_zone_type = $new_time_zone_type;
2502 } else {
2503 print "\nInvalid configuration value.\n";
2504 print "\nPress enter to continue...";
2505 $tmp = <STDIN>;
2506 }
2507 $time_zone_type =~ s/[\r\n]//g;
2508 return $time_zone_type;
2509 }
2510
2511 # set the location base for redirects (since 1.5.2)
2512 sub command_config_location_base {
2513 print "Here you can set the base part of the SquirrelMail URL.\n";
2514 print "It is normally autodetected but if that fails, use this\n";
2515 print "option to override.\n";
2516 print "It should contain only the protocol and hostname/port parts\n";
2517 print "of the URL; the full path will be appended automatically.\n\n";
2518 print "Examples:\nhttp://webmail.example.org\nhttp://webmail.example.com:8080\nhttps://webmail.example.com:6691\n\n";
2519 print "Do not add any path elements.\n";
2520
2521 print "URL base? [" .$WHT."autodetect$NRM]: $WHT";
2522 $new_config_location_base = <STDIN>;
2523 chomp($new_config_location_base);
2524 $config_location_base = $new_config_location_base;
2525
2526 return $config_location_base;
2527 }
2528
2529
2530
2531 sub command41 {
2532 print "\nDefine the themes that you wish to use. If you have added ";
2533 print "a theme of your own, just follow the instructions (?) about how to add ";
2534 print "them. You can also change the default theme.\n";
2535 print "[theme] command (?=help) > ";
2536 $input = <STDIN>;
2537 $input =~ s/[\r\n]//g;
2538 while ( $input ne "d" ) {
2539 if ( $input =~ /^\s*l\s*/i ) {
2540 $count = 0;
2541 while ( $count <= $#theme_name ) {
2542 if ( $count == $theme_default ) {
2543 print " *";
2544 } else {
2545 print " ";
2546 }
2547 if ( $count < 10 ) {
2548 print " ";
2549 }
2550 $name = $theme_name[$count];
2551 $num_spaces = 35 - length($name);
2552 for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
2553 $name = $name . " ";
2554 }
2555
2556 print " $count. $name";
2557 print "($theme_path[$count])\n";
2558
2559 $count++;
2560 }
2561 } elsif ( $input =~ /^\s*m\s*[0-9]+/i ) {
2562 $old_def = $theme_default;
2563 $theme_default = $input;
2564 $theme_default =~ s/^\s*m\s*//;
2565 if ( ( $theme_default > $#theme_name ) || ( $theme_default < 0 ) ) {
2566 print "Cannot set default theme to $theme_default. That theme does not exist.\n";
2567 $theme_default = $old_def;
2568 }
2569 } elsif ( $input =~ /^\s*\+/ ) {
2570 print "What is the name of this theme: ";
2571 $name = <STDIN>;
2572 $name =~ s/[\r\n]//g;
2573 $theme_name[ $#theme_name + 1 ] = $name;
2574 print "Be sure to put ../themes/ before the filename.\n";
2575 print "What file is this stored in (ex: ../themes/default_theme.php): ";
2576 $name = <STDIN>;
2577 $name =~ s/[\r\n]//g;
2578 $theme_path[ $#theme_path + 1 ] = $name;
2579 } elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
2580 if ( $input =~ /[0-9]+\s*$/ ) {
2581 $rem_num = $input;
2582 $rem_num =~ s/^\s*-\s*//g;
2583 $rem_num =~ s/\s*$//;
2584 } else {
2585 $rem_num = $#theme_name;
2586 }
2587 if ( $rem_num == $theme_default ) {
2588 print "You cannot remove the default theme!\n";
2589 } else {
2590 $count = 0;
2591 @new_theme_name = ();
2592 @new_theme_path = ();
2593 while ( $count <= $#theme_name ) {
2594 if ( $count != $rem_num ) {
2595 @new_theme_name = ( @new_theme_name, $theme_name[$count] );
2596 @new_theme_path = ( @new_theme_path, $theme_path[$count] );
2597 }
2598 $count++;
2599 }
2600 @theme_name = @new_theme_name;
2601 @theme_path = @new_theme_path;
2602 if ( $theme_default > $rem_num ) {
2603 $theme_default--;
2604 }
2605 }
2606 } elsif ( $input =~ /^\s*t\s*/i ) {
2607 print "\nStarting detection...\n\n";
2608
2609 opendir( DIR, "../themes" );
2610 @files = grep { /\.php$/i } readdir(DIR);
2611 $cnt = 0;
2612 while ( $cnt <= $#files ) {
2613 $filename = "../themes/" . $files[$cnt];
2614 if ( $filename ne "../themes/index.php" ) {
2615 $found = 0;
2616 for ( $x = 0 ; $x <= $#theme_path ; $x++ ) {
2617 if ( $theme_path[$x] eq $filename ) {
2618 $found = 1;
2619 }
2620 }
2621 if ( $found != 1 ) {
2622 print "** Found theme: $filename\n";
2623 print " What is its name? ";
2624 $nm = <STDIN>;
2625 $nm =~ s/[\n\r]//g;
2626 $theme_name[ $#theme_name + 1 ] = $nm;
2627 $theme_path[ $#theme_path + 1 ] = $filename;
2628 }
2629 }
2630 $cnt++;
2631 }
2632 print "\n";
2633 for ( $cnt = 0 ; $cnt <= $#theme_path ; $cnt++ ) {
2634 $filename = $theme_path[$cnt];
2635 if ( !( -e $filename ) ) {
2636 print " Removing $filename (file not found)\n";
2637 $offset = 0;
2638 @new_theme_name = ();
2639 @new_theme_path = ();
2640 for ( $x = 0 ; $x < $#theme_path ; $x++ ) {
2641 if ( $theme_path[$x] eq $filename ) {
2642 $offset = 1;
2643 }
2644 if ( $offset == 1 ) {
2645 $new_theme_name[$x] = $theme_name[ $x + 1 ];
2646 $new_theme_path[$x] = $theme_path[ $x + 1 ];
2647 } else {
2648 $new_theme_name[$x] = $theme_name[$x];
2649 $new_theme_path[$x] = $theme_path[$x];
2650 }
2651 }
2652 @theme_name = @new_theme_name;
2653 @theme_path = @new_theme_path;
2654 }
2655 }
2656 print "\nDetection complete!\n\n";
2657
2658 closedir DIR;
2659 } elsif ( $input =~ /^\s*\?\s*/ ) {
2660 print ".-------------------------.\n";
2661 print "| t (detect themes) |\n";
2662 print "| + (add theme) |\n";
2663 print "| - N (remove theme) |\n";
2664 print "| m N (mark default) |\n";
2665 print "| l (list themes) |\n";
2666 print "| d (done) |\n";
2667 print "`-------------------------'\n";
2668 }
2669 print "[theme] command (?=help) > ";
2670 $input = <STDIN>;
2671 $input =~ s/[\r\n]//g;
2672 }
2673 }
2674
2675 sub command_templates {
2676 print "\nDefine the template sets that you wish to use. If you have added ";
2677 print "a template set of your own, just follow the instructions (?) about how to add ";
2678 print "them. You can also change the default template.\n";
2679
2680 print "\n Available Templates:\n";
2681
2682 $count = 0;
2683 while ( $count <= $#templateset_name ) {
2684 if ( $count == $templateset_default ) {
2685 print " *";
2686 } else {
2687 print " ";
2688 }
2689 if ( $count < 10 ) {
2690 print " ";
2691 }
2692 $name = $templateset_name[$count];
2693 $num_spaces = 35 - length($name);
2694 for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
2695 $name = $name . " ";
2696 }
2697
2698 print " $count. $name";
2699 print "($templateset_path[$count])\n";
2700
2701 $count++;
2702 }
2703
2704 # opendir( DIR, "../templates" );
2705 # @files = readdir(DIR);
2706 # $pos = 0;
2707 #
2708 # while ( $cnt <= $#files ) {
2709 # if ( -d "../templates/" . $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne "CVS" ) {
2710 # $filename = "../templates/" . $files[$cnt];
2711 # $found = 0;
2712 # for ( $x = 0 ; $x <= $#templateset_path ; $x++ ) {
2713 # if ( $theme_path[$x] eq $filename ) {
2714 # $found = 1;
2715 # }
2716 # }
2717 # }
2718 # $cnt++;
2719 # }
2720 # for ( $i = 0 ; $i <= $#files ; $i++ ) {
2721 # if ( -d "../templates/" . $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne "CVS" ) {
2722 # $match = 0;
2723 # for ( $k = 0 ; $k <= $#aTemplateSets ; $k++ ) {
2724 # if ( $aTemplateSets[$chosen] eq $files[$i] ) {
2725 # $match = 1;
2726 # }
2727 # }
2728 # if ( $match == 0 ) {
2729 # $unused_plugins[$pos] = $files[$i];
2730 # $pos++;
2731 # }
2732 # }
2733 # }
2734 #
2735 # for ( $i = 0 ; $i <= $#unused_plugins ; $i++ ) {
2736 # $num = $num + 1;
2737 # print " $num. $unused_plugins[$i]\n";
2738 # }
2739 # closedir DIR;
2740
2741 print "\n";
2742 print ".--------------------------------.\n";
2743 print "| t (detect templates set) |\n";
2744 print "| + (add template set) |\n";
2745 print "| - N (remove template set) |\n";
2746 print "| m N (mark template set) |\n";
2747 print "| l (list template set) |\n";
2748 print "| d (done) |\n";
2749 print "`--------------------------------'\n";
2750 print "\n[template set] command (?=help) > ";
2751
2752 $input = <STDIN>;
2753 $input =~ s/[\r\n]//g;
2754 while ( $input ne "d" ) {
2755 if ( $input =~ /^\s*l\s*/i ) {
2756 $count = 0;
2757 while ( $count <= $#templateset_name ) {
2758 if ( $count == $templateset_default ) {
2759 print " *";
2760 } else {
2761 print " ";
2762 }
2763 if ( $count < 10 ) {
2764 print " ";
2765 }
2766 $name = $templateset_name[$count];
2767 $num_spaces = 35 - length($name);
2768 for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
2769 $name = $name . " ";
2770 }
2771
2772 print " $count. $name";
2773 print "($templateset_path[$count])\n";
2774
2775 $count++;
2776 }
2777 } elsif ( $input =~ /^\s*m\s*[0-9]+/i ) {
2778 $old_def = $templateset_default;
2779 $templateset_default = $input;
2780 $templateset_default =~ s/^\s*m\s*//;
2781 if ( ( $templateset_default > $#templateset_name ) || ( $templateset_default < 0 ) ) {
2782 print "Cannot set default template set to $templateset_default. That template set does not exist.\n";
2783 $templateset_default = $old_def;
2784 }
2785 } elsif ( $input =~ /^\s*\+/ ) {
2786 print "What is the name of this template: ";
2787 $name = <STDIN>;
2788 $name =~ s/[\r\n]//g;
2789 $templateset_name[ $#templateset_name + 1 ] = $name;
2790 print "Be sure to put ../templates/ before the dirname.\n";
2791 print "What file is this stored in (ex: ../templates/default/): ";
2792 $name = <STDIN>;
2793 $name =~ s/[\r\n]//g;
2794 $templateset_path[ $#templateset_path + 1 ] = $name;
2795 } elsif ( $input =~ /^\s*t\s*/i ) {
2796 print "\nStarting detection...\n\n";
2797 opendir( DIR, "../templates" );
2798 @files = readdir(DIR);
2799 $cnt = 0;
2800 $detected = 0;
2801 while ( $cnt <= $#files ) {
2802 if ( -d "../templates/" . $files[$cnt] && $files[$cnt] !~ /^\./ && $files[$cnt] ne "CVS" ) {
2803 $filename = "../templates/" . $files[$cnt]. "/";
2804 $found = 0;
2805 for ( $x = 0 ; $x <= $#templateset_path ; $x++ ) {
2806 if ( $templateset_path[$x] eq $filename ) {
2807 $found = 1;
2808 }
2809 }
2810 if ( $found != 1 && $detected == 0) {
2811 $templateset_path[ $#templateset_path + 1 ] = $filename;
2812 $templateset_name[ $#templateset_name + 1 ] = "Default template";
2813 $aTemplateSet[ $#templateset_name + 1 ] = "Default template";
2814 $aTemplateSet[ $#templateset_path + 1 ] = $filename;
2815 } elsif ( $found != 1) {
2816 print "** Found template set: $filename\n";
2817 print " What is it's name? ";
2818 $nm = <STDIN>;
2819 $nm =~ s/[\n\r]//g;
2820 $templateset_path[ $#templateset_path + 1 ] = $filename;
2821 $templateset_name[ $#templateset_name + 1 ] = $nm;
2822
2823 $aTemplateSet[ $#templateset_name + 1 ] = $nm;
2824 $aTemplateSet[ $#templateset_path + 1 ] = $filename;
2825 }
2826 $detected++;
2827 }
2828 $cnt++;
2829 }
2830 print "\n";
2831 for ( $cnt = 0 ; $cnt <= $#templateset_path ; $cnt++ ) {
2832 $filename = $templateset_path[$cnt];
2833 if ( !(-d $filename) ) {
2834 print " Removing $filename (file not found)\n";
2835 $offset = 0;
2836 @new_templateset_name = ();
2837 @new_templateset_path = ();
2838 for ( $x = 0 ; $x < $#templateset_path ; $x++ ) {
2839 if ( $templateset_path[$x] eq $filename ) {
2840 $offset = 1;
2841 }
2842 if ( $offset == 1 ) {
2843 $new_templateset_name[$x] = $templateset_name[ $x + 1 ];
2844 $new_theme_path[$x] = $templateset_path[ $x + 1 ];
2845 } else {
2846 $new_templateset_name[$x] = $templateset_name[$x];
2847 $new_templateset_path[$x] = $templateset_path[$x];
2848 }
2849 }
2850 @templateset_name = @new_templateset_name;
2851 @templateset_path = @new_templateset_path;
2852 }
2853 }
2854 print "\nDetection complete!\n\n";
2855
2856 closedir DIR;
2857 } elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
2858 if ( $input =~ /[0-9]+\s*$/ ) {
2859 $rem_num = $input;
2860 $rem_num =~ s/^\s*-\s*//g;
2861 $rem_num =~ s/\s*$//;
2862 } else {
2863 $rem_num = $#templateset_name;
2864 }
2865 if ( $rem_num == $templateset_default ) {
2866 print "You cannot remove the default template set!\n";
2867 } else {
2868 $count = 0;
2869 @new_templateset_name = ();
2870 @new_templateset_path = ();
2871 while ( $count <= $#templateset_name ) {
2872 if ( $count != $rem_num ) {
2873 @new_templateset_name = ( @new_templateset_name, $templateset_name[$count] );
2874 @new_templateset_path = ( @new_templateset_path, $templateset_path[$count] );
2875 }
2876 $count++;
2877 }
2878 @templateset_name = @new_templateset_name;
2879 @templateset_path = @new_templateset_path;
2880 if ( $templateset_default > $rem_num ) {
2881 $templateset_default--;
2882 }
2883 }
2884 } elsif ( $input =~ /^\s*\?\s*/ ) {
2885 print ".--------------------------------.\n";
2886 print "| t (detect templates set) |\n";
2887 print "| + (add template set) |\n";
2888 print "| - N (remove template set) |\n";
2889 print "| m N (mark template set) |\n";
2890 print "| l (list template set) |\n";
2891 print "| d (done) |\n";
2892 print "`--------------------------------'\n";
2893 }
2894 print "[template set] command (?=help) > ";
2895 $input = <STDIN>;
2896 $input =~ s/[\r\n]//g;
2897 }
2898 return $templateset_default;
2899 }
2900
2901
2902 # Theme - CSS file
2903 sub command42 {
2904 print "You may specify a cascading style-sheet (CSS) file to be included\n";
2905 print "on each html page generated by SquirrelMail. The CSS file is useful\n";
2906 print "for specifying a site-wide font. If you're not familiar with CSS\n";
2907 print "files, leave this blank.\n";
2908 print "\n";
2909 print "To clear out an existing value, just type a space for the input.\n";
2910 print "\n";
2911 print "Please be aware of the following: \n";
2912 print " - Relative URLs are relative to the config dir\n";
2913 print " to use the themes directory, use ../themes/css/newdefault.css\n";
2914 print " - To specify a css file defined outside the SquirrelMail source tree\n";
2915 print " use the absolute URL the webserver would use to include the file\n";
2916 print " e.g. http://some.host.com/css/mystyle.css or /css/mystyle.css\n";
2917 print "\n";
2918 print "[$WHT$theme_css$NRM]: $WHT";
2919 $new_theme_css = <STDIN>;
2920
2921 if ( $new_theme_css eq "\n" ) {
2922 $new_theme_css = $theme_css;
2923 } else {
2924 $new_theme_css =~ s/[\r\n]//g;
2925 }
2926 $new_theme_css =~ s/^\s*//;
2927 return $new_theme_css;
2928 }
2929
2930 # sets default font size option
2931 sub command_default_fontsize {
2932 print "Enter default font size [$WHT$$default_fontsize$NRM]: $WHT";
2933 $new_size = <STDIN>;
2934 if ( $new_size eq "\n" ) {
2935 $new_size = $size;
2936 } else {
2937 $new_size =~ s/[\r\n]//g;
2938 }
2939 return $new_size;
2940 }
2941
2942 # controls available fontsets
2943 sub command_fontsets {
2944 # Greeting
2945 print "You can control fontsets available to end users here.\n";
2946 # set initial $input value
2947 $input = 'l';
2948 while ( $input ne "x" ) {
2949 if ( $input =~ /^\s*a\s*/i ) {
2950 # add new fontset
2951 print "\nFontset name: ";
2952 $name = <STDIN>;
2953 if (! $fontsets{trim($name)}) {
2954 print "Fontset string: ";
2955 $value = <STDIN>;
2956 $fontsets{trim($name)} = trim($value);
2957 } else {
2958 print "\nERROR: Such fontset already exists.\n";
2959 }
2960 } elsif ( $input =~ /^\s*e\s*/i ) {
2961 # edit existing fontset
2962 print "\nFontset name: ";
2963 $name = <STDIN>;
2964 if (! $fontsets{trim($name)}) {
2965 print "\nERROR: No such fontset.\n";
2966 } else {
2967 print "Fontset string [$fontsets{trim($name)}]: ";
2968 $value = <STDIN>;
2969 $fontsets{trim($name)} = trim($value);
2970 }
2971 } elsif ( $input =~ /^\s*d\s*/ ) {
2972 # delete existing fontset
2973 print "\nFontset name: ";
2974 $name = <STDIN>;
2975 if (! $fontsets{trim($name)}) {
2976 print "\nERROR: No such fontset.\n";
2977 } else {
2978 delete $fontsets{trim($name)};
2979 }
2980 } elsif ( $input =~ /^\s*l\s*/ ) {
2981 # list fontsets
2982 print "\nConfigured fontsets:\n";
2983 while (($fontset_name, $fontset_string) = each(%fontsets)) {
2984 print " $fontset_name = $fontset_string\n";
2985 }
2986 print "Default fontset: $default_fontset\n";
2987 } elsif ( $input =~ /^\s*m\s*/ ) {
2988 # set default fontset
2989 print "\nSet default fontset [$default_fontset]: ";
2990 $name = <STDIN>;
2991 if (trim($name) ne '' and ! $fontsets{trim($name)}) {
2992 print "\nERROR: No such fontset.\n";
2993 } else {
2994 $default_fontset = trim($name);
2995 }
2996 } else {
2997 # print available commands on any other input
2998 print "\nAvailable commands:\n";
2999 print " a - Adds new fontset.\n";
3000 print " d - Deletes existing fontset.\n";
3001 print " e - Edits existing fontset.\n";
3002 print " h or ? - Shows this help screen.\n";
3003 print " l - Lists available fontsets.\n";
3004 print " m - Sets default fontset.\n";
3005 print " x - Exits fontset editor mode.\n";
3006 }
3007 print "\nCommand [fontsets] (a,d,e,h,?=help,l,m,x)> ";
3008 $input = <STDIN>;
3009 $input =~ s/[\r\n]//g;
3010 }
3011 }
3012
3013 sub command61 {
3014 print "You can now define different LDAP servers.\n";
3015 print "Please ensure proper permissions for config.php when including\n";
3016 print "sensitive passwords.\n\n";
3017 print "[ldap] command (?=help) > ";
3018 $input = <STDIN>;
3019 $input =~ s/[\r\n]//g;
3020 while ( $input ne "d" ) {
3021 if ( $input =~ /^\s*l\s*/i ) {
3022 $count = 0;
3023 while ( $count <= $#ldap_host ) {
3024 print "$count. $ldap_host[$count]\n";
3025 print " base: $ldap_base[$count]\n";
3026 if ( $ldap_charset[$count] ) {
3027 print " charset: $ldap_charset[$count]\n";
3028 }
3029 if ( $ldap_port[$count] ) {
3030 print " port: $ldap_port[$count]\n";
3031 }
3032 if ( $ldap_name[$count] ) {
3033 print " name: $ldap_name[$count]\n";
3034 }
3035 if ( $ldap_maxrows[$count] ) {
3036 print " maxrows: $ldap_maxrows[$count]\n";
3037 }
3038 if ( $ldap_filter[$count] ) {
3039 print " filter: $ldap_filter[$count]\n";
3040 }
3041 if ( $ldap_binddn[$count] ) {
3042 print " binddn: $ldap_binddn[$count]\n";
3043 if ( $ldap_bindpw[$count] ) {
3044 print " bindpw: $ldap_bindpw[$count]\n";
3045 }
3046 }
3047 if ( $ldap_protocol[$count] ) {
3048 print " protocol: $ldap_protocol[$count]\n";
3049 }
3050 if ( $ldap_limit_scope[$count] ) {
3051 print " limit_scope: $ldap_limit_scope[$count]\n";
3052 }
3053 if ( $ldap_listing[$count] ) {
3054 print " listing: $ldap_listing[$count]\n";
3055 }
3056 if ( $ldap_writeable[$count] ) {
3057 print " writeable: $ldap_writeable[$count]\n";
3058 }
3059 if ( $ldap_search_tree[$count] ) {
3060 print " search_tree: $ldap_search_tree[$count]\n";
3061 }
3062 if ( $ldap_starttls[$count] ) {
3063 print " starttls: $ldap_starttls[$count]\n";
3064 }
3065
3066 print "\n";
3067 $count++;
3068 }
3069 } elsif ( $input =~ /^\s*\+/ ) {
3070 $sub = $#ldap_host + 1;
3071
3072 print "First, we need to have the hostname or the IP address where\n";
3073 print "this LDAP server resides. Example: ldap.bigfoot.com\n";
3074 print "hostname: ";
3075 $name = <STDIN>;
3076 $name =~ s/[\r\n]//g;
3077 $ldap_host[$sub] = $name;
3078
3079 print "\n";
3080
3081 print "Next, we need the server root (base dn). For this, an empty\n";
3082 print "string is allowed.\n";
3083 print "Example: ou=member_directory,o=netcenter.com\n";
3084 print "base: ";
3085 $name = <STDIN>;
3086 $name =~ s/[\r\n]//g;
3087 $ldap_base[$sub] = $name;
3088
3089 print "\n";
3090
3091 print "This is the TCP/IP port number for the LDAP server. Default\n";
3092 print "port is 389. This is optional. Press ENTER for default.\n";
3093 print "port: ";
3094 $name = <STDIN>;
3095 $name =~ s/[\r\n]//g;
3096 $ldap_port[$sub] = $name;
3097
3098 print "\n";
3099
3100 print "This is the charset for the server. Default is utf-8. This\n";
3101 print "is also optional. Press ENTER for default.\n";
3102 print "charset: ";
3103 $name = <STDIN>;
3104 $name =~ s/[\r\n]//g;
3105 $ldap_charset[$sub] = $name;
3106
3107 print "\n";
3108
3109 print "This is the name for the server, used to tag the results of\n";
3110 print "the search. Default it \"LDAP: hostname\". Press ENTER for default\n";
3111 print "name: ";
3112 $name = <STDIN>;
3113 $name =~ s/[\r\n]//g;
3114 $ldap_name[$sub] = $name;
3115
3116 print "\n";
3117
3118 print "You can specify the maximum number of rows in the search result.\n";
3119 print "Default value is equal to 250 rows. Press ENTER for default.\n";
3120 print "maxrows: ";
3121 $name = <STDIN>;
3122 $name =~ s/[\r\n]//g;
3123 $ldap_maxrows[$sub] = $name;
3124
3125
3126 print "\n";
3127
3128 print "If your LDAP server does not like anonymous logins, you can specify bind DN.\n";
3129 print "Default is none, anonymous bind. Press ENTER for default.\n";
3130 print "binddn: ";
3131 $name = <STDIN>;
3132 $name =~ s/[\r\n]//g;
3133 $ldap_binddn[$sub] = $name;
3134
3135 print "\n";
3136
3137 if ( $ldap_binddn[$sub] ne '' ) {
3138
3139 print "Now, please specify password for that DN.\n";
3140 print "bindpw: ";
3141 $name = <STDIN>;
3142 $name =~ s/[\r\n]//g;
3143 $ldap_bindpw[$sub] = $name;
3144
3145 print "\n";
3146 }
3147
3148 print "You can specify bind protocol version here.\n";
3149 print "Default protocol version depends on your php ldap settings.\n";
3150 print "Press ENTER for default.\n";
3151 print "protocol: ";
3152 $name = <STDIN>;
3153 $name =~ s/[\r\n]//g;
3154 $ldap_protocol[$sub] = $name;
3155
3156 print "\n";
3157
3158 print "This configuration section allows to set some rarely used\n";
3159 print "options and options specific to some LDAP implementations.\n";
3160 print "\n";
3161 print "Do you want to set advanced LDAP directory settings? (y/N):";
3162 $ldap_advanced_settings = <STDIN>;
3163 if ( $ldap_advanced_settings =~ /^y\n/i ) {
3164 $ldap_advanced_settings = 'true';
3165 } else {
3166 $ldap_advanced_settings = 'false';
3167 }
3168
3169 if ($ldap_advanced_settings eq 'true') {
3170 print "\n";
3171
3172 print "You can control LDAP directory listing here. This option can\n";
3173 print "be useful if you run small LDAP server and want to provide listing\n";
3174 print "of all addresses stored in LDAP to users of webmail interface.\n";
3175 print "Number of displayed entries is limited by maxrows setting.\n";
3176 print "\n";
3177 print "Don't enable this option for public LDAP directories.\n";
3178 print "\n";
3179 print "Allow listing of LDAP directory? (y/N):";
3180 $name = <STDIN>;
3181 if ( $name =~ /^y\n/i ) {
3182 $name = 'true';
3183 } else {
3184 $name = 'false';
3185 }
3186 $ldap_listing[$sub] = $name;
3187
3188 print "\n";
3189
3190 print "You can control write access to LDAP address book here. This option can\n";
3191 print "be useful if you run small LDAP server and want to provide writable\n";
3192 print "shared address book stored in LDAP to users of webmail interface.\n";
3193 print "\n";
3194 print "Don't enable this option for public LDAP directories.\n";
3195 print "\n";
3196 print "Allow writing to LDAP directory? (y/N):";
3197 $name = <STDIN>;
3198 if ( $name =~ /^y\n/i ) {
3199 $name = 'true';
3200 } else {
3201 $name = 'false';
3202 }
3203 $ldap_writeable[$sub] = $name;
3204
3205 print "\n";
3206
3207 print "You can specify an additional search filter.\n";
3208 print "This could be something like \"(objectclass=posixAccount)\".\n";
3209 print "No filtering is performed by default. Press ENTER for default.\n";
3210 print "filter: ";
3211 $name = <STDIN>;
3212 $name =~ s/[\r|\n]//g;
3213 $ldap_filter[$sub] = $name;
3214
3215 print "\n";
3216
3217 print "You can control search scope here.\n";
3218 print "This option is specific to Microsoft ADS implementation.\n";
3219 print "It requires use of v3 or newer LDAP protocol.\n";
3220 print "Don't enable it, if you use other LDAP server.\n";
3221 print "\n";
3222 print "Limit ldap scope? (y/N):";
3223 $name = <STDIN>;
3224 if ( $name =~ /^y\n/i ) {
3225 $name = 'true';
3226 } else {
3227 $name = 'false';
3228 }
3229 $ldap_limit_scope[$sub] = $name;
3230
3231 print "\n";
3232
3233 print "You can control ldap search type here.\n";
3234 print "Addresses can be searched in entire LDAP subtree (default)\n";
3235 print "or only first level entries are returned.\n";
3236