Add ability to show plugin list in columns. This should probably be adapted to other...
[squirrelmail.git] / config / conf.pl
1 #!/usr/bin/env perl
2 # conf.pl
3 #
4 # Copyright (c) 1999-2007 The SquirrelMail Project Team
5 # Licensed under the GNU GPL. For full terms see COPYING.
6 #
7 # A simple configure script to configure SquirrelMail
8 #
9 # $Id$
10 ############################################################
11 $conf_pl_version = "1.5.0";
12
13 ############################################################
14 # Check what directory we're supposed to be running in, and
15 # change there if necessary. File::Basename has been in
16 # Perl since at least 5.003_7, and nobody sane runs anything
17 # before that, but just in case.
18 ############################################################
19 my $dir;
20 if ( eval q{require "File/Basename.pm"} ) {
21 $dir = File::Basename::dirname($0);
22 chdir($dir);
23 }
24
25 ############################################################
26 # Some people try to run this as a CGI. That's wrong!
27 ############################################################
28 if ( defined( $ENV{'PATH_INFO'} )
29 || defined( $ENV{'QUERY_STRING'} )
30 || defined( $ENV{'REQUEST_METHOD'} ) ) {
31 print "Content-Type: text/html\n\n";
32 print "You must run this script from the command line.";
33 exit;
34 }
35
36 ############################################################
37 # If we got here, use Cwd to get the full directory path
38 # (the Basename stuff above will sometimes return '.' as
39 # the base directory, which is not helpful here).
40 ############################################################
41 use Cwd;
42 $dir = cwd();
43
44
45 ############################################################
46 # First, lets read in the data already in there...
47 ############################################################
48 if ( -e "config.php" ) {
49 # Make sure that file is readable
50 if (! -r "config.php") {
51 clear_screen();
52 print "WARNING:\n";
53 print "The file \"config/config.php\" was found, but you don't\n";
54 print "have rights to read it.\n";
55 print "\n";
56 print "Press enter to continue";
57 $ctu = <STDIN>;
58 exit;
59 }
60 open( FILE, "config.php" );
61 while ( $line = <FILE> ) {
62 $line =~ s/^\s+//;
63 $line =~ s/^\$//;
64 $var = $line;
65
66 $var =~ s/=/EQUALS/;
67 if ( $var =~ /^([a-z])/i ) {
68 @o = split ( /\s*EQUALS\s*/, $var );
69 if ( $o[0] eq "config_version" ) {
70 $o[1] =~ s/[\n\r]//g;
71 $o[1] =~ s/[\'\"];\s*$//;
72 $o[1] =~ s/;$//;
73 $o[1] =~ s/^[\'\"]//;
74
75 $config_version = $o[1];
76 close(FILE);
77 }
78 }
79 }
80 close(FILE);
81
82 if ( $config_version ne $conf_pl_version ) {
83 clear_screen();
84 print "WARNING:\n";
85 print " The file \"config/config.php\" was found, but it is for\n";
86 print " an older version of SquirrelMail. It is possible to still\n";
87 print " read the defaults from this file but be warned that many\n";
88 print " preferences change between versions. It is recommended that\n";
89 print " you start with a clean config.php for each upgrade that you\n";
90 print " do. To do this, just move config/config.php out of the way.\n";
91 print "\n";
92 print "Continue loading with the old config.php [y/N]? ";
93 $ctu = <STDIN>;
94
95 if ( ( $ctu !~ /^y\n/i ) || ( $ctu =~ /^\n/ ) ) {
96 exit;
97 }
98
99 print "\nDo you want me to stop warning you [y/N]? ";
100 $ctu = <STDIN>;
101 if ( $ctu =~ /^y\n/i ) {
102 $print_config_version = $conf_pl_version;
103 } else {
104 $print_config_version = $config_version;
105 }
106 } else {
107 $print_config_version = $config_version;
108 }
109
110 $config = 1;
111 open( FILE, "config.php" );
112 } elsif ( -e "config_default.php" ) {
113 open( FILE, "config_default.php" );
114 while ( $line = <FILE> ) {
115 $line =~ s/^\s+//;
116 $line =~ s/^\$//;
117 $var = $line;
118
119 $var =~ s/=/EQUALS/;
120 if ( $var =~ /^([a-z])/i ) {
121 @o = split ( /\s*EQUALS\s*/, $var );
122 if ( $o[0] eq "config_version" ) {
123 $o[1] =~ s/[\n\r]//g;
124 $o[1] =~ s/[\'\"];\s*$//;
125 $o[1] =~ s/;$//;
126 $o[1] =~ s/^[\'\"]//;
127
128 $config_version = $o[1];
129 close(FILE);
130 }
131 }
132 }
133 close(FILE);
134
135 if ( $config_version ne $conf_pl_version ) {
136 clear_screen();
137 print "WARNING:\n";
138 print " You are trying to use a 'config_default.php' from an older\n";
139 print " version of SquirrelMail. This is HIGHLY unrecommended. You\n";
140 print " should get the 'config_default.php' that matches the version\n";
141 print " of SquirrelMail that you are running. You can get this from\n";
142 print " the SquirrelMail web page by going to the following URL:\n";
143 print " http://squirrelmail.org.\n";
144 print "\n";
145 print "Continue loading with old config_default.php (a bad idea) [y/N]? ";
146 $ctu = <STDIN>;
147
148 if ( ( $ctu !~ /^y\n/i ) || ( $ctu =~ /^\n/ ) ) {
149 exit;
150 }
151
152 print "\nDo you want me to stop warning you [y/N]? ";
153 $ctu = <STDIN>;
154 if ( $ctu =~ /^y\n/i ) {
155 $print_config_version = $conf_pl_version;
156 } else {
157 $print_config_version = $config_version;
158 }
159 } else {
160 $print_config_version = $config_version;
161 }
162 $config = 2;
163 open( FILE, "config_default.php" );
164 } else {
165 print "No configuration file found. Please get config_default.php\n";
166 print "or config.php before running this again. This program needs\n";
167 print "a default config file to get default values.\n";
168 exit;
169 }
170
171 # Read and parse the current configuration file
172 # (either config.php or config_default.php).
173 while ( $line = <FILE> ) {
174 $line =~ s/^\s+//;
175 $line =~ s/^\$//;
176 $var = $line;
177
178 $var =~ s/=/EQUALS/;
179 if ( $var =~ /^([a-z])/i ) {
180 @options = split ( /\s*EQUALS\s*/, $var );
181 $options[1] =~ s/[\n\r]//g;
182 $options[1] =~ s/[\'\"];\s*$//;
183 $options[1] =~ s/;$//;
184 $options[1] =~ s/^[\'\"]//;
185 # de-escape escaped strings
186 $options[1] =~ s/\\'/'/g;
187 $options[1] =~ s/\\\\/\\/g;
188
189 if ( $options[0] =~ /^user_themes\[[0-9]+\]\[['"]PATH['"]\]/ ) {
190 $sub = $options[0];
191 $sub =~ s/\]\[['"]PATH['"]\]//;
192 $sub =~ s/.*\[//;
193 if ( -e "../css/" ) {
194 $options[1] =~ s/^\.\.\/config/\.\.\/css/;
195 }
196 $user_theme_path[$sub] = &change_to_rel_path($options[1]);
197 } elsif ( $options[0] =~ /^user_themes\[[0-9]+\]\[['"]NAME['"]\]/ ) {
198 $sub = $options[0];
199 $sub =~ s/\]\[['"]NAME['"]\]//;
200 $sub =~ s/.*\[//;
201 $user_theme_name[$sub] = $options[1];
202 } elsif ( $options[0] =~ /^icon_themes\[[0-9]+\]\[['"]PATH['"]\]/ ) {
203 $sub = $options[0];
204 $sub =~ s/\]\[['"]PATH['"]\]//;
205 $sub =~ s/.*\[//;
206 if ( -e "../images/" ) {
207 $options[1] =~ s/^\.\.\/config/\.\.\/images/;
208 }
209 $icon_theme_path[$sub] = &change_to_rel_path($options[1]);
210 } elsif ( $options[0] =~ /^icon_themes\[[0-9]+\]\[['"]NAME['"]\]/ ) {
211 $sub = $options[0];
212 $sub =~ s/\]\[['"]NAME['"]\]//;
213 $sub =~ s/.*\[//;
214 $icon_theme_name[$sub] = $options[1];
215 } elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]ID['"]\]/ ) {
216 $sub = $options[0];
217 $sub =~ s/\]\[['"]ID['"]\]//;
218 $sub =~ s/.*\[//;
219 if ( -e "../templates" ) {
220 $options[1] =~ s/^\.\.\/config/\.\.\/templates/;
221 }
222 $templateset_id[$sub] = $options[1];
223 ##### FIXME: This section BELOW here so old prefs files don't blow up when running conf.pl
224 ##### Remove after a month or two
225 } elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]PATH['"]\]/ ) {
226 $sub = $options[0];
227 $sub =~ s/\]\[['"]PATH['"]\]//;
228 $sub =~ s/.*\[//;
229 if ( -e "../templates" ) {
230 $options[1] =~ s/^\.\.\/config/\.\.\/templates/;
231 }
232 $templateset_id[$sub] = $options[1];
233 ##### FIXME: This section ABOVE here so old prefs files don't blow up when running conf.pl
234 ##### Remove after a month or two
235 } elsif ( $options[0] =~ /^aTemplateSet\[[0-9]+\]\[['"]NAME['"]\]/ ) {
236 $sub = $options[0];
237 $sub =~ s/\]\[['"]NAME['"]\]//;
238 $sub =~ s/.*\[//;
239 $templateset_name[$sub] = $options[1];
240 } elsif ( $options[0] =~ /^plugins\[[0-9]*\]/ ) {
241 $sub = $options[0];
242 $sub =~ s/\]//;
243 $sub =~ s/^plugins\[//;
244 if ($sub eq '') {
245 push @plugins, $options[1];
246 } else {
247 $plugins[$sub] = $options[1];
248 }
249 } elsif ($options[0] =~ /^fontsets\[\'[a-z]*\'\]/) {
250 # parse associative $fontsets array
251 $sub = $options[0];
252 $sub =~ s/\'\]//;
253 $sub =~ s/^fontsets\[\'//;
254 $fontsets{$sub} = $options[1];
255 } elsif ( $options[0] =~ /^theme\[[0-9]+\]\[['"]PATH|NAME['"]\]/ ) {
256 ##
257 ## $color themes are no longer supported. Please leave this
258 ## so conf.pl doesn't barf if it encounters a $theme.
259 ##
260 } elsif ( $options[0] =~ /^ldap_server\[[0-9]+\]/ ) {
261 $sub = $options[0];
262 $sub =~ s/\]//;
263 $sub =~ s/^ldap_server\[//;
264 $continue = 0;
265 while ( ( $tmp = <FILE> ) && ( $continue != 1 ) ) {
266 if ( $tmp =~ /\);\s*$/ ) {
267 $continue = 1;
268 }
269
270 if ( $tmp =~ /^\s*[\'\"]host[\'\"]/i ) {
271 $tmp =~ s/^\s*[\'\"]host[\'\"]\s*=>\s*[\'\"]//i;
272 $tmp =~ s/[\'\"],?\s*$//;
273 $tmp =~ s/[\'\"]\);\s*$//;
274 $host = $tmp;
275 } elsif ( $tmp =~ /^\s*[\'\"]base[\'\"]/i ) {
276 $tmp =~ s/^\s*[\'\"]base[\'\"]\s*=>\s*[\'\"]//i;
277 $tmp =~ s/[\'\"],?\s*$//;
278 $tmp =~ s/[\'\"]\);\s*$//;
279 $base = $tmp;
280 } elsif ( $tmp =~ /^\s*[\'\"]charset[\'\"]/i ) {
281 $tmp =~ s/^\s*[\'\"]charset[\'\"]\s*=>\s*[\'\"]//i;
282 $tmp =~ s/[\'\"],?\s*$//;
283 $tmp =~ s/[\'\"]\);\s*$//;
284 $charset = $tmp;
285 } elsif ( $tmp =~ /^\s*[\'\"]port[\'\"]/i ) {
286 $tmp =~ s/^\s*[\'\"]port[\'\"]\s*=>\s*[\'\"]?//i;
287 $tmp =~ s/[\'\"]?,?\s*$//;
288 $tmp =~ s/[\'\"]?\);\s*$//;
289 $port = $tmp;
290 } elsif ( $tmp =~ /^\s*[\'\"]maxrows[\'\"]/i ) {
291 $tmp =~ s/^\s*[\'\"]maxrows[\'\"]\s*=>\s*[\'\"]?//i;
292 $tmp =~ s/[\'\"]?,?\s*$//;
293 $tmp =~ s/[\'\"]?\);\s*$//;
294 $maxrows = $tmp;
295 } elsif ( $tmp =~ /^\s*[\'\"]filter[\'\"]/i ) {
296 $tmp =~ s/^\s*[\'\"]filter[\'\"]\s*=>\s*[\'\"]?//i;
297 $tmp =~ s/[\'\"]?,?\s*$//;
298 $tmp =~ s/[\'\"]?\);\s*$//;
299 $filter = $tmp;
300 } elsif ( $tmp =~ /^\s*[\'\"]name[\'\"]/i ) {
301 $tmp =~ s/^\s*[\'\"]name[\'\"]\s*=>\s*[\'\"]//i;
302 $tmp =~ s/[\'\"],?\s*$//;
303 $tmp =~ s/[\'\"]\);\s*$//;
304 $name = $tmp;
305 } elsif ( $tmp =~ /^\s*[\'\"]binddn[\'\"]/i ) {
306 $tmp =~ s/^\s*[\'\"]binddn[\'\"]\s*=>\s*[\'\"]//i;
307 $tmp =~ s/[\'\"],?\s*$//;
308 $tmp =~ s/[\'\"]\);\s*$//;
309 $binddn = $tmp;
310 } elsif ( $tmp =~ /^\s*[\'\"]bindpw[\'\"]/i ) {
311 $tmp =~ s/^\s*[\'\"]bindpw[\'\"]\s*=>\s*[\'\"]//i;
312 $tmp =~ s/[\'\"],?\s*$//;
313 $tmp =~ s/[\'\"]\);\s*$//;
314 $bindpw = $tmp;
315 } elsif ( $tmp =~ /^\s*[\'\"]protocol[\'\"]/i ) {
316 $tmp =~ s/^\s*[\'\"]protocol[\'\"]\s*=>\s*[\'\"]?//i;
317 $tmp =~ s/[\'\"]?,?\s*$//;
318 $tmp =~ s/[\'\"]?\);\s*$//;
319 $protocol = $tmp;
320 } elsif ( $tmp =~ /^\s*[\'\"]limit_scope[\'\"]/i ) {
321 $tmp =~ s/^\s*[\'\"]limit_scope[\'\"]\s*=>\s*[\'\"]?//i;
322 $tmp =~ s/[\'\"]?,?\s*$//;
323 $tmp =~ s/[\'\"]?\);\s*$//;
324 $limit_scope = $tmp;
325 } elsif ( $tmp =~ /^\s*[\'\"]listing[\'\"]/i ) {
326 $tmp =~ s/^\s*[\'\"]listing[\'\"]\s*=>\s*[\'\"]?//i;
327 $tmp =~ s/[\'\"]?,?\s*$//;
328 $tmp =~ s/[\'\"]?\);\s*$//;
329 $listing = $tmp;
330 } elsif ( $tmp =~ /^\s*[\'\"]writeable[\'\"]/i ) {
331 $tmp =~ s/^\s*[\'\"]writeable[\'\"]\s*=>\s*[\'\"]?//i;
332 $tmp =~ s/[\'\"]?,?\s*$//;
333 $tmp =~ s/[\'\"]?\);\s*$//;
334 $writeable = $tmp;
335 } elsif ( $tmp =~ /^\s*[\'\"]search_tree[\'\"]/i ) {
336 $tmp =~ s/^\s*[\'\"]search_tree[\'\"]\s*=>\s*[\'\"]?//i;
337 $tmp =~ s/[\'\"]?,?\s*$//;
338 $tmp =~ s/[\'\"]?\);\s*$//;
339 $search_tree = $tmp;
340 } elsif ( $tmp =~ /^\s*[\'\"]starttls[\'\"]/i ) {
341 $tmp =~ s/^\s*[\'\"]starttls[\'\"]\s*=>\s*[\'\"]?//i;
342 $tmp =~ s/[\'\"]?,?\s*$//;
343 $tmp =~ s/[\'\"]?\);\s*$//;
344 $starttls = $tmp;
345 }
346 }
347 $ldap_host[$sub] = $host;
348 $ldap_base[$sub] = $base;
349 $ldap_name[$sub] = $name;
350 $ldap_port[$sub] = $port;
351 $ldap_maxrows[$sub] = $maxrows;
352 $ldap_filter[$sub] = $filter;
353 $ldap_charset[$sub] = $charset;
354 $ldap_binddn[$sub] = $binddn;
355 $ldap_bindpw[$sub] = $bindpw;
356 $ldap_protocol[$sub] = $protocol;
357 $ldap_limit_scope[$sub] = $limit_scope;
358 $ldap_listing[$sub] = $listing;
359 $ldap_writeable[$sub] = $writeable;
360 $ldap_search_tree[$sub] = $search_tree;
361 $ldap_starttls[$sub] = $starttls;
362 } elsif ( $options[0] =~ /^(data_dir|attachment_dir|org_logo|signout_page|icon_theme_def)$/ ) {
363 ${ $options[0] } = &change_to_rel_path($options[1]);
364 } else {
365 ${ $options[0] } = $options[1];
366 }
367 }
368 }
369 close FILE;
370
371 # FIXME: unknown introduction date
372 $useSendmail = 'false' if ( lc($useSendmail) ne 'true' );
373 $sendmail_path = "/usr/sbin/sendmail" if ( !$sendmail_path );
374 $pop_before_smtp = 'false' if ( !$pop_before_smtp );
375 $default_unseen_notify = 2 if ( !$default_unseen_notify );
376 $default_unseen_type = 1 if ( !$default_unseen_type );
377 $config_use_color = 0 if ( !$config_use_color );
378 $invert_time = 'false' if ( !$invert_time );
379 $force_username_lowercase = 'false' if ( !$force_username_lowercase );
380 $optional_delimiter = "detect" if ( !$optional_delimiter );
381 $auto_create_special = 'false' if ( !$auto_create_special );
382 $default_use_priority = 'true' if ( !$default_use_priority );
383 $default_use_mdn = 'true' if ( !$default_use_mdn );
384 $delete_folder = 'false' if ( !$delete_folder );
385 $noselect_fix_enable = 'false' if ( !$noselect_fix_enable );
386 $frame_top = "_top" if ( !$frame_top );
387 $provider_uri = '' if ( !$provider_uri );
388 $provider_name = '' if ( !$provider_name || $provider_name eq 'SquirrelMail');
389 $no_list_for_subscribe = 'false' if ( !$no_list_for_subscribe );
390 $allow_charset_search = 'true' if ( !$allow_charset_search );
391 $allow_advanced_search = 0 if ( !$allow_advanced_search) ;
392 $prefs_user_field = 'user' if ( !$prefs_user_field );
393 $prefs_key_field = 'prefkey' if ( !$prefs_key_field );
394 $prefs_val_field = 'prefval' if ( !$prefs_val_field );
395 $session_name = 'SQMSESSID' if ( !$session_name );
396 $skip_SM_header = 'false' if ( !$skip_SM_header );
397 $default_use_javascript_addr_book = 'false' if (! $default_use_javascript_addr_book);
398
399 # since 1.2.0
400 $hide_sm_attributions = 'false' if ( !$hide_sm_attributions );
401 # since 1.2.5
402 $edit_identity = 'true' if ( !$edit_identity );
403 $edit_name = 'true' if ( !$edit_name );
404
405 # since 1.4.0
406 $use_smtp_tls= 'false' if ( !$use_smtp_tls);
407 $smtp_auth_mech = 'none' if ( !$smtp_auth_mech );
408 $use_imap_tls = 'false' if ( !$use_imap_tls );
409 $imap_auth_mech = 'login' if ( !$imap_auth_mech );
410
411 # since 1.5.0
412 $show_alternative_names = 'false' if ( !$show_alternative_names );
413 # $available_languages option available only in 1.5.0. removed due to $languages
414 # implementation changes. options are provided by limit_languages plugin
415 # $available_languages = 'all' if ( !$available_languages );
416 $aggressive_decoding = 'false' if ( !$aggressive_decoding );
417 # available only in 1.5.0 and 1.5.1
418 # $advanced_tree = 'false' if ( !$advanced_tree );
419 $use_php_recode = 'false' if ( !$use_php_recode );
420 $use_php_iconv = 'false' if ( !$use_php_iconv );
421
422 # since 1.5.1
423 $use_icons = 'false' if ( !$use_icons );
424 $use_iframe = 'false' if ( !$use_iframe );
425 $lossy_encoding = 'false' if ( !$lossy_encoding );
426 $allow_remote_configtest = 'false' if ( !$allow_remote_configtest );
427 $secured_config = 'true' if ( !$secured_config );
428
429 $sm_debug_mode = 'SM_DEBUG_MODE_MODERATE' if ( !$sm_debug_mode );
430 #FIXME: When this is STABLE software, remove the line above and uncomment the one below:
431 #$sm_debug_mode = 'SM_DEBUG_MODE_OFF' if ( !$sm_debug_mode );
432 $sm_debug_mode = convert_debug_binary_integer_to_constants($sm_debug_mode);
433
434 $addrbook_global_table = 'global_abook' if ( !$addrbook_global_table );
435 $addrbook_global_writeable = 'false' if ( !$addrbook_global_writeable );
436 $addrbook_global_listing = 'false' if ( !$addrbook_global_listing );
437 $abook_global_file = '' if ( !$abook_global_file);
438 $abook_global_file_writeable = 'false' if ( !$abook_global_file_writeable);
439 $abook_global_file_listing = 'true' if ( !$abook_global_file_listing );
440 $encode_header_key = '' if ( !$encode_header_key );
441 $hide_auth_header = 'false' if ( !$hide_auth_header );
442 $time_zone_type = '0' if ( !$time_zone_type );
443 $prefs_user_size = 128 if ( !$prefs_user_size );
444 $prefs_key_size = 64 if ( !$prefs_key_size );
445 $prefs_val_size = 65536 if ( !$prefs_val_size );
446
447 # add qmail-inject test here for backwards compatibility
448 if ( !$sendmail_args && $sendmail_path =~ /qmail-inject/ ) {
449 $sendmail_args = '';
450 } elsif ( !$sendmail_args ) {
451 $sendmail_args = '-i -t';
452 }
453
454 $default_fontsize = '' if ( !$default_fontsize);
455 $default_fontset = '' if ( !$default_fontset);
456 if ( !%fontsets) {
457 %fontsets = ('serif', 'serif',
458 'sans', 'helvetica,arial,sans-serif',
459 'comicsans', 'comic sans ms,sans-serif',
460 'tahoma', 'tahoma,sans-serif',
461 'verasans', 'bitstream vera sans,verdana,sans-serif');
462 }
463
464 # $use_imap_tls and $use_smtp_tls are switched to integer since 1.5.1
465 $use_imap_tls = 0 if ( $use_imap_tls eq 'false');
466 $use_imap_tls = 1 if ( $use_imap_tls eq 'true');
467 $use_smtp_tls = 0 if ( $use_smtp_tls eq 'false');
468 $use_smtp_tls = 1 if ( $use_smtp_tls eq 'true');
469 # sorting options changed names and reversed values in 1.5.1
470 $disable_thread_sort = 'false' if ( !$disable_thread_sort );
471 $disable_server_sort = 'false' if ( !$disable_server_sort );
472
473 # since 1.5.2
474 $abook_file_line_length = 2048 if ( !$abook_file_line_length );
475 $config_location_base = '' if ( !$config_location_base );
476 $smtp_sitewide_user = '' if ( !$smtp_sitewide_user );
477 $smtp_sitewide_pass = '' if ( !$smtp_sitewide_pass );
478 $icon_theme_def = '' if ( !$icon_theme_def );
479 $disable_plugins = 'false' if ( !$disable_plugins );
480 $disable_plugins_user = '' if ( !$disable_plugins_user );
481 $only_secure_cookies = 'true' if ( !$only_secure_cookies );
482 $ask_user_info = 'true' if ( !$ask_user_info );
483
484 if ( $ARGV[0] eq '--install-plugin' ) {
485 print "Activating plugin " . $ARGV[1] . "\n";
486 if ( -d "../plugins/" . $ARGV[1]) {
487 push @plugins, $ARGV[1];
488 save_data();
489 exit(0);
490 } else {
491 print "No such plugin.\n";
492 exit(1);
493 }
494 } elsif ( $ARGV[0] eq '--remove-plugin' ) {
495 print "Removing plugin " . $ARGV[1] . "\n";
496 foreach $plugin (@plugins) {
497 if ( $plugin ne $ARGV[1] ) {
498 push @newplugins, $plugin;
499 }
500 }
501 @plugins = @newplugins;
502 save_data();
503 exit(0);
504 } elsif ( $ARGV[0] eq '--update-plugins' or $ARGV[0] eq '-u') {
505 build_plugin_hook_array();
506 exit(0);
507 } elsif ( $ARGV[0] eq '--help' or $ARGV[0] eq '-h') {
508 print "SquirrelMail Configuration Script\n";
509 print "Usage:\n";
510 print " * No arguments: initiates the configuration dialog\n";
511 print " * --install-plugin <plugin> : activates the specified plugin\n";
512 print " * --remove-plugin <plugin> : deactivates the specified plugin\n";
513 print " * --update-plugins , -u : rebuilds plugin_hooks.php according\n";
514 print " to plugins activated in config.php\n";
515 print " * --help , -h : Displays this help\n";
516 print "\n";
517 exit(0);
518 }
519
520
521
522 ####################################################################################
523
524 # used in multiple places, define once
525 $list_supported_imap_servers =
526 " bincimap = Binc IMAP server\n" .
527 " courier = Courier IMAP server\n" .
528 " cyrus = Cyrus IMAP server\n" .
529 " dovecot = Dovecot Secure IMAP server\n" .
530 " exchange = Microsoft Exchange IMAP server\n" .
531 " hmailserver = hMailServer\n" .
532 " macosx = Mac OS X Mailserver\n" .
533 " mercury32 = Mercury/32\n" .
534 " uw = University of Washington's IMAP server\n";
535
536 #####################################################################################
537 if ( $config_use_color == 1 ) {
538 $WHT = "\x1B[37;1m";
539 $NRM = "\x1B[0m";
540 } else {
541 $WHT = "";
542 $NRM = "";
543 $config_use_color = 2;
544 }
545
546 # lists can be printed in more than one column; default is just one
547 #
548 $columns = 1;
549 $screen_width = 80;
550
551 while ( ( $command ne "q" ) && ( $command ne "Q" ) && ( $command ne ":q" ) ) {
552 clear_screen();
553 print $WHT. "SquirrelMail Configuration : " . $NRM;
554 if ( $config == 1 ) { print "Read: config.php"; }
555 elsif ( $config == 2 ) { print "Read: config_default.php"; }
556 print " ($print_config_version)\n";
557 print "---------------------------------------------------------\n";
558
559 if ( $menu == 0 ) {
560 print $WHT. "Main Menu --\n" . $NRM;
561 print "1. Organization Preferences\n";
562 print "2. Server Settings\n";
563 print "3. Folder Defaults\n";
564 print "4. General Options\n";
565 print "5. User Interface\n";
566 print "6. Address Books\n";
567 print "7. Message of the Day (MOTD)\n";
568 print "8. Plugins\n";
569 print "9. Database\n";
570 print "10. Language settings\n";
571 print "11. Tweaks\n";
572 print "\n";
573 print "D. Set pre-defined settings for specific IMAP servers\n";
574 print "\n";
575 } elsif ( $menu == 1 ) {
576 print $WHT. "Organization Preferences\n" . $NRM;
577 print "1. Organization Name : $WHT$org_name$NRM\n";
578 print "2. Organization Logo : $WHT$org_logo$NRM\n";
579 print "3. Org. Logo Width/Height : $WHT($org_logo_width/$org_logo_height)$NRM\n";
580 print "4. Organization Title : $WHT$org_title$NRM\n";
581 print "5. Signout Page : $WHT$signout_page$NRM\n";
582 print "6. Top Frame : $WHT$frame_top$NRM\n";
583 print "7. Provider link : $WHT$provider_uri$NRM\n";
584 print "8. Provider link text : $WHT$provider_name$NRM\n";
585
586 print "\n";
587 print "R Return to Main Menu\n";
588 } elsif ( $menu == 2 ) {
589 print $WHT. "Server Settings\n\n" . $NRM;
590 print $WHT . "General" . $NRM . "\n";
591 print "-------\n";
592 print "1. Domain : $WHT$domain$NRM\n";
593 print "2. Invert Time : $WHT$invert_time$NRM\n";
594 print "3. Sendmail or SMTP : $WHT";
595 if ( lc($useSendmail) eq 'true' ) {
596 print "Sendmail";
597 } else {
598 print "SMTP";
599 }
600 print "$NRM\n";
601 print "\n";
602
603 if ( $show_imap_settings ) {
604 print $WHT . "IMAP Settings". $NRM . "\n--------------\n";
605 print "4. IMAP Server : $WHT$imapServerAddress$NRM\n";
606 print "5. IMAP Port : $WHT$imapPort$NRM\n";
607 print "6. Authentication type : $WHT$imap_auth_mech$NRM\n";
608 print "7. Secure IMAP (TLS) : $WHT" . display_use_tls($use_imap_tls) . "$NRM\n";
609 print "8. Server software : $WHT$imap_server_type$NRM\n";
610 print "9. Delimiter : $WHT$optional_delimiter$NRM\n";
611 print "\n";
612 } elsif ( $show_smtp_settings ) {
613 if ( lc($useSendmail) eq 'true' ) {
614 print $WHT . "Sendmail" . $NRM . "\n--------\n";
615 print "4. Sendmail Path : $WHT$sendmail_path$NRM\n";
616 print "5. Sendmail arguments : $WHT$sendmail_args$NRM\n";
617 print "6. Header encryption key : $WHT$encode_header_key$NRM\n";
618 print "\n";
619 } else {
620 print $WHT . "SMTP Settings" . $NRM . "\n-------------\n";
621 print "4. SMTP Server : $WHT$smtpServerAddress$NRM\n";
622 print "5. SMTP Port : $WHT$smtpPort$NRM\n";
623 print "6. POP before SMTP : $WHT$pop_before_smtp$NRM\n";
624 print "7. SMTP Authentication : $WHT$smtp_auth_mech" . display_smtp_sitewide_userpass() ."$NRM\n";
625 print "8. Secure SMTP (TLS) : $WHT" . display_use_tls($use_smtp_tls) . "$NRM\n";
626 print "9. Header encryption key : $WHT$encode_header_key$NRM\n";
627 print "\n";
628 }
629 }
630
631 if ($show_imap_settings == 0) {
632 print "A. Update IMAP Settings : ";
633 print "$WHT$imapServerAddress$NRM:";
634 print "$WHT$imapPort$NRM ";
635 print "($WHT$imap_server_type$NRM)\n";
636 }
637 if ($show_smtp_settings == 0) {
638 if ( lc($useSendmail) eq 'true' ) {
639 print "B. Change Sendmail Config : $WHT$sendmail_path$NRM\n";
640 } else {
641 print "B. Update SMTP Settings : ";
642 print "$WHT$smtpServerAddress$NRM:";
643 print "$WHT$smtpPort$NRM\n";
644 }
645 }
646 if ( $show_smtp_settings || $show_imap_settings )
647 {
648 print "H. Hide " .
649 ($show_imap_settings ? "IMAP Server" :
650 (lc($useSendmail) eq 'true') ? "Sendmail" : "SMTP") . " Settings\n";
651 }
652
653 print "\n";
654 print "R Return to Main Menu\n";
655 } elsif ( $menu == 3 ) {
656 print $WHT. "Folder Defaults\n" . $NRM;
657 print "1. Default Folder Prefix : $WHT$default_folder_prefix$NRM\n";
658 print "2. Show Folder Prefix Option : $WHT$show_prefix_option$NRM\n";
659 print "3. Trash Folder : $WHT$trash_folder$NRM\n";
660 print "4. Sent Folder : $WHT$sent_folder$NRM\n";
661 print "5. Drafts Folder : $WHT$draft_folder$NRM\n";
662 print "6. By default, move to trash : $WHT$default_move_to_trash$NRM\n";
663 print "7. By default, save sent messages : $WHT$default_move_to_sent$NRM\n";
664 print "8. By default, save as draft : $WHT$default_save_as_draft$NRM\n";
665 print "9. List Special Folders First : $WHT$list_special_folders_first$NRM\n";
666 print "10. Show Special Folders Color : $WHT$use_special_folder_color$NRM\n";
667 print "11. Auto Expunge : $WHT$auto_expunge$NRM\n";
668 print "12. Default Sub. of INBOX : $WHT$default_sub_of_inbox$NRM\n";
669 print "13. Show 'Contain Sub.' Option : $WHT$show_contain_subfolders_option$NRM\n";
670 print "14. Default Unseen Notify : $WHT$default_unseen_notify$NRM\n";
671 print "15. Default Unseen Type : $WHT$default_unseen_type$NRM\n";
672 print "16. Auto Create Special Folders : $WHT$auto_create_special$NRM\n";
673 print "17. Folder Delete Bypasses Trash : $WHT$delete_folder$NRM\n";
674 print "18. Enable /NoSelect folder fix : $WHT$noselect_fix_enable$NRM\n";
675 print "\n";
676 print "R Return to Main Menu\n";
677 } elsif ( $menu == 4 ) {
678 print $WHT. "General Options\n" . $NRM;
679 print "1. Data Directory : $WHT$data_dir$NRM\n";
680 print "2. Attachment Directory : $WHT$attachment_dir$NRM\n";
681 print "3. Directory Hash Level : $WHT$dir_hash_level$NRM\n";
682 print "4. Default Left Size : $WHT$default_left_size$NRM\n";
683 print "5. Usernames in Lowercase : $WHT$force_username_lowercase$NRM\n";
684 print "6. Allow use of priority : $WHT$default_use_priority$NRM\n";
685 print "7. Hide SM attributions : $WHT$hide_sm_attributions$NRM\n";
686 print "8. Allow use of receipts : $WHT$default_use_mdn$NRM\n";
687 print "9. Allow editing of identity : $WHT$edit_identity$NRM\n";
688 print " Allow editing of name : $WHT$edit_name$NRM\n";
689 print " Remove username from header : $WHT$hide_auth_header$NRM\n";
690 print "10. Disable server thread sort : $WHT$disable_thread_sort$NRM\n";
691 print "11. Disable server-side sorting : $WHT$disable_server_sort$NRM\n";
692 print "12. Allow server charset search : $WHT$allow_charset_search$NRM\n";
693 print "13. Allow advanced search : $WHT$allow_advanced_search$NRM\n";
694 print "14. PHP session name : $WHT$session_name$NRM\n";
695 print "15. Time zone configuration : $WHT$time_zone_type$NRM\n";
696 print "16. Location base : $WHT$config_location_base$NRM\n";
697 print "17. Only secure cookies if poss. : $WHT$only_secure_cookies$NRM\n";
698 print "\n";
699 print "R Return to Main Menu\n";
700 } elsif ( $menu == 5 ) {
701 print $WHT. "User Interface\n" . $NRM;
702 print "1. Use Icons? : $WHT$use_icons$NRM\n";
703 # print "3. Default Icon Set : $WHT$icon_theme_def$NRM\n";
704 print "2. Default font size : $WHT$default_fontsize$NRM\n";
705 print "3. Manage template sets (skins)\n";
706 print "4. Manage user themes\n";
707 print "5. Manage font sets\n";
708 print "6. Manage icon themes\n";
709
710 print "\n";
711 print "R Return to Main Menu\n";
712 } elsif ( $menu == 6 ) {
713 print $WHT. "Address Books\n" . $NRM;
714 print "1. Change LDAP Servers\n";
715 for ( $count = 0 ; $count <= $#ldap_host ; $count++ ) {
716 print " > $ldap_host[$count]\n";
717 }
718 print "2. Use Javascript address book search : $WHT$default_use_javascript_addr_book$NRM\n";
719 print "3. Global address book file : $WHT$abook_global_file$NRM\n";
720 print "4. Allow writing into global file address book : $WHT$abook_global_file_writeable$NRM\n";
721 print "5. Allow listing of global file address book : $WHT$abook_global_file_listing$NRM\n";
722 print "6. Allowed address book line length : $WHT$abook_file_line_length$NRM\n";
723 print "\n";
724 print "R Return to Main Menu\n";
725 } elsif ( $menu == 7 ) {
726 print $WHT. "Message of the Day (MOTD)\n" . $NRM;
727 print "\n$motd\n";
728 print "\n";
729 print "1 Edit the MOTD\n";
730 print "\n";
731 print "R Return to Main Menu\n";
732 } elsif ( $menu == 8 ) {
733 if (lc($disable_plugins) eq 'true' && $disable_plugins_user ne '') {
734 print $WHT. "Plugins (WARNING: All plugins are currently disabled\n for the user \"$disable_plugins_user\"!)\n" . $NRM;
735 } elsif (lc($disable_plugins) eq 'true') {
736 print $WHT. "Plugins (WARNING: All plugins are currently disabled!)\n" . $NRM;
737 } else {
738 print $WHT. "Plugins\n" . $NRM;
739 }
740 print " Installed Plugins\n";
741 if ($columns > 1) {
742 $num = print_multi_col_list(1, $columns, $screen_width, 1, @plugins);
743 } else {
744 $num = 0;
745 for ( $count = 0 ; $count <= $#plugins ; $count++ ) {
746 $num = $count + 1;
747 $english_name = get_plugin_english_name($plugins[$count]);
748 if ( $english_name eq "" ) {
749 print " $WHT$num.$NRM $plugins[$count]" . get_plugin_version($plugins[$count]) . "\n";
750 } else {
751 print " $WHT$num.$NRM $english_name ($plugins[$count])" . get_plugin_version($plugins[$count]) . "\n";
752 }
753 }
754 }
755 print "\n Available Plugins:\n";
756 opendir( DIR, "../plugins" );
757 @files = sort(readdir(DIR));
758 $pos = 0;
759 @unused_plugins = ();
760 for ( $i = 0 ; $i <= $#files ; $i++ ) {
761 if ( -d "../plugins/" . $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne ".svn" ) {
762 $match = 0;
763 for ( $k = 0 ; $k <= $#plugins ; $k++ ) {
764 if ( $plugins[$k] eq $files[$i] ) {
765 $match = 1;
766 }
767 }
768 if ( $match == 0 ) {
769 $unused_plugins[$pos] = $files[$i];
770 $pos++;
771 }
772 }
773 }
774
775 if ($columns > 1) {
776 $num = print_multi_col_list($num + 1, $columns, $screen_width, 1, @unused_plugins);
777 } else {
778 for ( $i = 0 ; $i <= $#unused_plugins ; $i++ ) {
779 $num = $num + 1;
780 $english_name = get_plugin_english_name($unused_plugins[$i]);
781 if ( $english_name eq "" ) {
782 print " $WHT$num.$NRM $unused_plugins[$i]" . get_plugin_version($unused_plugins[$i]) . "\n";
783 } else {
784 print " $WHT$num.$NRM $english_name ($unused_plugins[$i])" . get_plugin_version($unused_plugins[$i]) . "\n";
785 }
786 }
787 }
788 closedir DIR;
789
790 print "\n";
791 if (lc($disable_plugins) eq 'true' && $disable_plugins_user ne '') {
792 print "E Enable active plugins (all plugins currently\n disabled for the user \"$disable_plugins_user\")\n";
793 } elsif (lc($disable_plugins) eq 'true') {
794 print "E Enable active plugins (all plugins currently\n disabled)\n";
795 } else {
796 print "D Disable all plugins\n";
797 }
798 print "U Set the user for whom plugins can be disabled\n";
799 print "R Return to Main Menu\n";
800 print "C# List plugins in <#> number of columns\n";
801 print "W# Change screen width to <#>\n";
802 } elsif ( $menu == 9 ) {
803 print $WHT. "Database\n" . $NRM;
804 print "1. DSN for Address Book : $WHT$addrbook_dsn$NRM\n";
805 print "2. Table for Address Book : $WHT$addrbook_table$NRM\n";
806 print "\n";
807 print "3. DSN for Preferences : $WHT$prefs_dsn$NRM\n";
808 print "4. Table for Preferences : $WHT$prefs_table$NRM\n";
809 print "5. Field for username : $WHT$prefs_user_field$NRM ($prefs_user_size)\n";
810 print "6. Field for prefs key : $WHT$prefs_key_field$NRM ($prefs_key_size)\n";
811 print "7. Field for prefs value : $WHT$prefs_val_field$NRM ($prefs_val_size)\n";
812 print "\n";
813 print "8. DSN for Global Address Book : $WHT$addrbook_global_dsn$NRM\n";
814 print "9. Table for Global Address Book : $WHT$addrbook_global_table$NRM\n";
815 print "10. Allow writing into Global Address Book : $WHT$addrbook_global_writeable$NRM\n";
816 print "11. Allow listing of Global Address Book : $WHT$addrbook_global_listing$NRM\n";
817 print "\n";
818 print "R Return to Main Menu\n";
819 } elsif ( $menu == 10 ) {
820 print $WHT. "Language settings\n" . $NRM;
821 print "1. Default Language : $WHT$squirrelmail_default_language$NRM\n";
822 print "2. Default Charset : $WHT$default_charset$NRM\n";
823 print "3. Show alternative language names : $WHT$show_alternative_names$NRM\n";
824 print "4. Enable aggressive decoding : $WHT$aggressive_decoding$NRM\n";
825 print "5. Enable lossy encoding : $WHT$lossy_encoding$NRM\n";
826 print "\n";
827 print "R Return to Main Menu\n";
828 } elsif ( $menu == 11 ) {
829 print $WHT. "Interface tweaks\n" . $NRM;
830 print "1. Display html mails in iframe : $WHT$use_iframe$NRM\n";
831 print "2. Ask user info on first login : $WHT$ask_user_info$NRM\n";
832 print "\n";
833 print $WHT. "PHP tweaks\n" . $NRM;
834 print "4. Use php recode functions : $WHT$use_php_recode$NRM\n";
835 print "5. Use php iconv functions : $WHT$use_php_iconv$NRM\n";
836 print "\n";
837 print $WHT. "Configuration tweaks\n" . $NRM;
838 print "6. Allow remote configtest : $WHT$allow_remote_configtest$NRM\n";
839 print "7. Debug mode : $WHT$sm_debug_mode$NRM\n";
840 print "8. Secured configuration mode : $WHT$secured_config$NRM\n";
841 print "\n";
842 print "R Return to Main Menu\n";
843 }
844 if ( $config_use_color == 1 ) {
845 print "C Turn color off\n";
846 } else {
847 print "C Turn color on\n";
848 }
849 print "S Save data\n";
850 print "Q Quit\n";
851
852 print "\n";
853 print "Command >> " . $WHT;
854 $command = <STDIN>;
855 $command =~ s/[\n\r]//g;
856 $command =~ tr/A-Z/a-z/;
857 print "$NRM\n";
858
859 # Read the commands they entered.
860 if ( $command eq "r" ) {
861 $menu = 0;
862 } elsif ( $command eq "s" ) {
863 save_data();
864 print "Press enter to continue...";
865 $tmp = <STDIN>;
866 $saved = 1;
867 } elsif ( ( $command eq "q" ) && ( $saved == 0 ) ) {
868 print "You have not saved your data.\n";
869 print "Save? [" . $WHT . "Y" . $NRM . "/n]: ";
870 $save = <STDIN>;
871 if ( ( $save =~ /^y/i ) || ( $save =~ /^\s*$/ ) ) {
872 save_data();
873 }
874 } elsif ( $command eq "c" ) {
875 if ( $config_use_color == 1 ) {
876 $config_use_color = 2;
877 $WHT = "";
878 $NRM = "";
879 } else {
880 $config_use_color = 1;
881 $WHT = "\x1B[37;1m";
882 $NRM = "\x1B[0m";
883 }
884 } elsif ( $command =~ /^w([0-9]+)/ ) {
885 $screen_width = $1;
886 } elsif ( $command eq "d" && $menu == 0 ) {
887 set_defaults();
888 } else {
889 $saved = 0;
890 if ( $menu == 0 ) {
891 if ( ( $command > 0 ) && ( $command < 12 ) ) {
892 $menu = $command;
893 }
894 } elsif ( $menu == 1 ) {
895 if ( $command == 1 ) { $org_name = command1(); }
896 elsif ( $command == 2 ) { $org_logo = command2(); }
897 elsif ( $command == 3 ) { ($org_logo_width,$org_logo_height) = command2a(); }
898 elsif ( $command == 4 ) { $org_title = command3(); }
899 elsif ( $command == 5 ) { $signout_page = command4(); }
900 elsif ( $command == 6 ) { $frame_top = command6(); }
901 elsif ( $command == 7 ) { $provider_uri = command7(); }
902 elsif ( $command == 8 ) { $provider_name = command8(); }
903
904 } elsif ( $menu == 2 ) {
905 if ( $command eq "a" ) { $show_imap_settings = 1; $show_smtp_settings = 0; }
906 elsif ( $command eq "b" ) { $show_imap_settings = 0; $show_smtp_settings = 1; }
907 elsif ( $command eq "h" ) { $show_imap_settings = 0; $show_smtp_settings = 0; }
908 elsif ( $command <= 3 ) {
909 if ( $command == 1 ) { $domain = command11(); }
910 elsif ( $command == 2 ) { $invert_time = command110(); }
911 elsif ( $command == 3 ) { $useSendmail = command14(); }
912 $show_imap_settings = 0; $show_smtp_settings = 0;
913 } elsif ( $show_imap_settings ) {
914 if ( $command == 4 ) { $imapServerAddress = command12(); }
915 elsif ( $command == 5 ) { $imapPort = command13(); }
916 elsif ( $command == 6 ) { $imap_auth_mech = command112a(); }
917 elsif ( $command == 7 ) { $use_imap_tls = command_use_tls("IMAP",$use_imap_tls); }
918 elsif ( $command == 8 ) { $imap_server_type = command19(); }
919 elsif ( $command == 9 ) { $optional_delimiter = command111(); }
920 } elsif ( $show_smtp_settings && lc($useSendmail) eq 'true' ) {
921 if ( $command == 4 ) { $sendmail_path = command15(); }
922 elsif ( $command == 5 ) { $sendmail_args = command_sendmail_args(); }
923 elsif ( $command == 6 ) { $encode_header_key = command114(); }
924 } elsif ( $show_smtp_settings ) {
925 if ( $command == 4 ) { $smtpServerAddress = command16(); }
926 elsif ( $command == 5 ) { $smtpPort = command17(); }
927 elsif ( $command == 6 ) { $pop_before_smtp = command18a(); }
928 elsif ( $command == 7 ) { $smtp_auth_mech = command112b(); }
929 elsif ( $command == 8 ) { $use_smtp_tls = command_use_tls("SMTP",$use_smtp_tls); }
930 elsif ( $command == 9 ) { $encode_header_key = command114(); }
931 }
932 } elsif ( $menu == 3 ) {
933 if ( $command == 1 ) { $default_folder_prefix = command21(); }
934 elsif ( $command == 2 ) { $show_prefix_option = command22(); }
935 elsif ( $command == 3 ) { $trash_folder = command23a(); }
936 elsif ( $command == 4 ) { $sent_folder = command23b(); }
937 elsif ( $command == 5 ) { $draft_folder = command23c(); }
938 elsif ( $command == 6 ) { $default_move_to_trash = command24a(); }
939 elsif ( $command == 7 ) { $default_move_to_sent = command24b(); }
940 elsif ( $command == 8 ) { $default_save_as_draft = command24c(); }
941 elsif ( $command == 9 ) { $list_special_folders_first = command27(); }
942 elsif ( $command == 10 ) { $use_special_folder_color = command28(); }
943 elsif ( $command == 11 ) { $auto_expunge = command29(); }
944 elsif ( $command == 12 ) { $default_sub_of_inbox = command210(); }
945 elsif ( $command == 13 ) { $show_contain_subfolders_option = command211(); }
946 elsif ( $command == 14 ) { $default_unseen_notify = command212(); }
947 elsif ( $command == 15 ) { $default_unseen_type = command213(); }
948 elsif ( $command == 16 ) { $auto_create_special = command214(); }
949 elsif ( $command == 17 ) { $delete_folder = command215(); }
950 elsif ( $command == 18 ) { $noselect_fix_enable = command216(); }
951 } elsif ( $menu == 4 ) {
952 if ( $command == 1 ) { $data_dir = command33a(); }
953 elsif ( $command == 2 ) { $attachment_dir = command33b(); }
954 elsif ( $command == 3 ) { $dir_hash_level = command33c(); }
955 elsif ( $command == 4 ) { $default_left_size = command35(); }
956 elsif ( $command == 5 ) { $force_username_lowercase = command36(); }
957 elsif ( $command == 6 ) { $default_use_priority = command37(); }
958 elsif ( $command == 7 ) { $hide_sm_attributions = command38(); }
959 elsif ( $command == 8 ) { $default_use_mdn = command39(); }
960 elsif ( $command == 9 ) { $edit_identity = command310(); }
961 elsif ( $command == 10 ) { $disable_thread_sort = command312(); }
962 elsif ( $command == 11 ) { $disable_server_sort = command313(); }
963 elsif ( $command == 12 ) { $allow_charset_search = command314(); }
964 elsif ( $command == 13 ) { $allow_advanced_search = command316(); }
965 elsif ( $command == 14 ) { $session_name = command317(); }
966 elsif ( $command == 15 ) { $time_zone_type = command318(); }
967 elsif ( $command == 16 ) { $config_location_base = command_config_location_base(); }
968 elsif ( $command == 17 ) { $only_secure_cookies = command319(); }
969 } elsif ( $menu == 5 ) {
970 if ( $command == 1 ) { $use_icons = commandB3(); }
971 # elsif ( $command == 3 ) { $icon_theme_def = commandB7(); }
972 elsif ( $command == 2 ) { $default_fontsize = command_default_fontsize(); }
973 elsif ( $command == 3 ) { $templateset_default = command_templates(); }
974 elsif ( $command == 4 ) { command_userThemes(); }
975 elsif ( $command == 5 ) { command_fontsets(); }
976 elsif ( $command == 6 ) { command_iconSets(); }
977 } elsif ( $menu == 6 ) {
978 if ( $command == 1 ) { command61(); }
979 elsif ( $command == 2 ) { command62(); }
980 elsif ( $command == 3 ) { $abook_global_file=command63(); }
981 elsif ( $command == 4 ) { command64(); }
982 elsif ( $command == 5 ) { command65(); }
983 elsif ( $command == 6 ) { command_abook_file_line_length(); }
984 } elsif ( $menu == 7 ) {
985 if ( $command == 1 ) { $motd = command71(); }
986 } elsif ( $menu == 8 ) {
987 if ( $command =~ /^[0-9]+/ ) { @plugins = command81(); }
988 elsif ( $command eq "u" ) { $disable_plugins_user = command82(); }
989 elsif ( $command eq "d" ) { $disable_plugins = 'true'; }
990 elsif ( $command eq "e" ) { $disable_plugins = 'false'; }
991 elsif ( $command =~ /^c([0-9]+)/ ) { $columns = $1; }
992 } elsif ( $menu == 9 ) {
993 if ( $command == 1 ) { $addrbook_dsn = command91(); }
994 elsif ( $command == 2 ) { $addrbook_table = command92(); }
995 elsif ( $command == 3 ) { $prefs_dsn = command93(); }
996 elsif ( $command == 4 ) { $prefs_table = command94(); }
997 elsif ( $command == 5 ) { $prefs_user_field = command95(); }
998 elsif ( $command == 6 ) { $prefs_key_field = command96(); }
999 elsif ( $command == 7 ) { $prefs_val_field = command97(); }
1000 elsif ( $command == 8 ) { $addrbook_global_dsn = command98(); }
1001 elsif ( $command == 9 ) { $addrbook_global_table = command99(); }
1002 elsif ( $command == 10 ) { $addrbook_global_writeable = command910(); }
1003 elsif ( $command == 11 ) { $addrbook_global_listing = command911(); }
1004 } elsif ( $menu == 10 ) {
1005 if ( $command == 1 ) { $squirrelmail_default_language = commandA1(); }
1006 elsif ( $command == 2 ) { $default_charset = commandA2(); }
1007 elsif ( $command == 3 ) { $show_alternative_names = commandA3(); }
1008 elsif ( $command == 4 ) { $aggressive_decoding = commandA4(); }
1009 elsif ( $command == 5 ) { $lossy_encoding = commandA5(); }
1010 } elsif ( $menu == 11 ) {
1011 if ( $command == 1 ) { $use_iframe = commandB2(); }
1012 elsif ( $command == 2 ) { $ask_user_info = command_ask_user_info(); }
1013 elsif ( $command == 4 ) { $use_php_recode = commandB4(); }
1014 elsif ( $command == 5 ) { $use_php_iconv = commandB5(); }
1015 elsif ( $command == 6 ) { $allow_remote_configtest = commandB6(); }
1016 elsif ( $command == 7 ) { $sm_debug_mode = commandB8(); }
1017 elsif ( $command == 8 ) { $secured_config = commandB9(); }
1018 }
1019 }
1020 }
1021
1022 # we exit here
1023 print "\nExiting conf.pl.\n".
1024 "You might want to test your configuration by browsing to\n".
1025 "http://your-squirrelmail-location/src/configtest.php\n".
1026 "Happy SquirrelMailing!\n\n";
1027
1028
1029 ####################################################################################
1030
1031 # org_name
1032 sub command1 {
1033 print "We have tried to make the name SquirrelMail as transparent as\n";
1034 print "possible. If you set up an organization name, most places where\n";
1035 print "SquirrelMail would take credit will be credited to your organization.\n";
1036 print "\n";
1037 print "If your Organization Name includes a '\$', please precede it with a \\. \n";
1038 print "Other '\$' will be considered the beginning of a variable that\n";
1039 print "must be defined before the \$org_name is printed.\n";
1040 print "\n";
1041 print "[$WHT$org_name$NRM]: $WHT";
1042 $new_org_name = <STDIN>;
1043 if ( $new_org_name eq "\n" ) {
1044 $new_org_name = $org_name;
1045 } else {
1046 $new_org_name =~ s/[\r\n]//g;
1047 $new_org_name =~ s/\"/&quot;/g;
1048 }
1049 return $new_org_name;
1050 }
1051
1052 # org_logo
1053 sub command2 {
1054 print "Your organization's logo is an image that will be displayed at\n";
1055 print "different times throughout SquirrelMail. ";
1056 print "\n";
1057 print "Please be aware of the following: \n";
1058 print " - Relative URLs are relative to the config dir\n";
1059 print " to use the default logo, use ../images/sm_logo.png\n";
1060 print " - To specify a logo defined outside the SquirrelMail source tree\n";
1061 print " use the absolute URL the webserver would use to include the file\n";
1062 print " e.g. http://example.com/images/mylogo.gif or /images/mylogo.jpg\n";
1063 print "\n";
1064 print "[$WHT$org_logo$NRM]: $WHT";
1065 $new_org_logo = <STDIN>;
1066 if ( $new_org_logo eq "\n" ) {
1067 $new_org_logo = $org_logo;
1068 } else {
1069 $new_org_logo =~ s/[\r\n]//g;
1070 }
1071 return $new_org_logo;
1072 }
1073
1074 # org_logo_width
1075 sub command2a {
1076 print "Your organization's logo is an image that will be displayed at\n";
1077 print "different times throughout SquirrelMail. Width\n";
1078 print "and Height of your logo image. Use '0' to disable.\n";
1079 print "\n";
1080 print "Width: [$WHT$org_logo_width$NRM]: $WHT";
1081 $new_org_logo_width = <STDIN>;
1082 $new_org_logo_width =~ tr/0-9//cd; # only want digits!
1083 if ( $new_org_logo_width eq '' ) {
1084 $new_org_logo_width = $org_logo_width;
1085 }
1086 if ( $new_org_logo_width > 0 ) {
1087 print "Height: [$WHT$org_logo_height$NRM]: $WHT";
1088 $new_org_logo_height = <STDIN>;
1089 $new_org_logo_height =~ tr/0-9//cd; # only want digits!
1090 if( $new_org_logo_height eq '' ) {
1091 $new_org_logo_height = $org_logo_height;
1092 }
1093 } else {
1094 $new_org_logo_height = 0;
1095 }
1096 return ($new_org_logo_width, $new_org_logo_height);
1097 }
1098
1099 # org_title
1100 sub command3 {
1101 print "A title is what is displayed at the top of the browser window in\n";
1102 print "the titlebar. Usually this will end up looking something like:\n";
1103 print "\"Netscape: $org_title\"\n";
1104 print "\n";
1105 print "If your Organization Title includes a '\$', please precede it with a \\. \n";
1106 print "Other '\$' will be considered the beginning of a variable that\n";
1107 print "must be defined before the \$org_title is printed.\n";
1108 print "\n";
1109 print "[$WHT$org_title$NRM]: $WHT";
1110 $new_org_title = <STDIN>;
1111 if ( $new_org_title eq "\n" ) {
1112 $new_org_title = $org_title;
1113 } else {
1114 $new_org_title =~ s/[\r\n]//g;
1115 $new_org_title =~ s/\"/\'/g;
1116 }
1117 return $new_org_title;
1118 }
1119
1120 # signout_page
1121 sub command4 {
1122 print "When users click the Sign Out button they will be logged out and\n";
1123 print "then sent to signout_page. If signout_page is left empty,\n";
1124 print "(hit space and then return) they will be taken, as normal,\n";
1125 print "to the default and rather sparse SquirrelMail signout page.\n";
1126 print "\n";
1127 print "[$WHT$signout_page$NRM]: $WHT";
1128 $new_signout_page = <STDIN>;
1129 if ( $new_signout_page eq "\n" ) {
1130 $new_signout_page = $signout_page;
1131 } else {
1132 $new_signout_page =~ s/[\r\n]//g;
1133 $new_signout_page =~ s/^\s+$//g;
1134 }
1135 return $new_signout_page;
1136 }
1137
1138 # Default top frame
1139 sub command6 {
1140 print "SquirrelMail defaults to using the whole of the browser window.\n";
1141 print "This allows you to keep it within a specified frame. The default\n";
1142 print "is '_top'\n";
1143 print "\n";
1144 print "[$WHT$frame_top$NRM]: $WHT";
1145 $new_frame_top = <STDIN>;
1146 if ( $new_frame_top eq "\n" ) {
1147 $new_frame_top = '_top';
1148 } else {
1149 $new_frame_top =~ s/[\r\n]//g;
1150 $new_frame_top =~ s/^\s+$//g;
1151 }
1152 return $new_frame_top;
1153 }
1154
1155 # Default link to provider
1156 sub command7 {
1157 print "Here you can set the link on the top-right of the message list.\n";
1158 print "If empty, it will not be displayed.\n";
1159 print "\n";
1160 print "[$WHT$provider_uri$NRM]: $WHT";
1161 $new_provider_uri = <STDIN>;
1162 if ( $new_provider_uri eq "\n" ) {
1163 $new_provider_uri = '';
1164 } else {
1165 $new_provider_uri =~ s/[\r\n]//g;
1166 $new_provider_uri =~ s/^\s+$//g;
1167 }
1168 return $new_provider_uri;
1169 }
1170
1171 sub command8 {
1172 print "Here you can set the name of the link on the top-right of the message list.\n";
1173 print "The default is empty (do not display anything).'\n";
1174 print "\n";
1175 print "[$WHT$provider_name$NRM]: $WHT";
1176 $new_provider_name = <STDIN>;
1177 if ( $new_provider_name eq "\n" ) {
1178 $new_provider_name = '';
1179 } else {
1180 $new_provider_name =~ s/[\r\n]//g;
1181 $new_provider_name =~ s/^\s+$//g;
1182 $new_provider_name =~ s/\'/\\'/g;
1183 }
1184 return $new_provider_name;
1185 }
1186
1187 ####################################################################################
1188
1189 # domain
1190 sub command11 {
1191 print "The domain name is the suffix at the end of all email addresses. If\n";
1192 print "for example, your email address is jdoe\@example.com, then your domain\n";
1193 print "would be example.com.\n";
1194 print "\n";
1195 print "[$WHT$domain$NRM]: $WHT";
1196 $new_domain = <STDIN>;
1197 if ( $new_domain eq "\n" ) {
1198 $new_domain = $domain;
1199 } else {
1200 $new_domain =~ s/\s//g;
1201 }
1202 return $new_domain;
1203 }
1204
1205 # imapServerAddress
1206 sub command12 {
1207 print "This is the hostname where your IMAP server can be contacted.\n";
1208 print "[$WHT$imapServerAddress$NRM]: $WHT";
1209 $new_imapServerAddress = <STDIN>;
1210 if ( $new_imapServerAddress eq "\n" ) {
1211 $new_imapServerAddress = $imapServerAddress;
1212 } else {
1213 $new_imapServerAddress =~ s/[\r\n]//g;
1214 }
1215 return $new_imapServerAddress;
1216 }
1217
1218 # imapPort
1219 sub command13 {
1220 print "This is the port that your IMAP server is on. Usually this is 143.\n";
1221 print "[$WHT$imapPort$NRM]: $WHT";
1222 $new_imapPort = <STDIN>;
1223 if ( $new_imapPort eq "\n" ) {
1224 $new_imapPort = $imapPort;
1225 } else {
1226 $new_imapPort =~ s/[\r\n]//g;
1227 }
1228 return $new_imapPort;
1229 }
1230
1231 # useSendmail
1232 sub command14 {
1233 print "You now need to choose the method that you will use for sending\n";
1234 print "messages in SquirrelMail. You can either connect to an SMTP server\n";
1235 print "or use sendmail directly.\n";
1236 if ( lc($useSendmail) eq 'true' ) {
1237 $default_value = "1";
1238 } else {
1239 $default_value = "2";
1240 }
1241 print "\n";
1242 print " 1. Sendmail\n";
1243 print " 2. SMTP\n";
1244 print "Your choice [1/2] [$WHT$default_value$NRM]: $WHT";
1245 $use_sendmail = <STDIN>;
1246 if ( ( $use_sendmail =~ /^1\n/i )
1247 || ( ( $use_sendmail =~ /^\n/ ) && ( $default_value eq "1" ) ) ) {
1248 $useSendmail = 'true';
1249 } else {
1250 $useSendmail = 'false';
1251 }
1252 return $useSendmail;
1253 }
1254
1255 # sendmail_path
1256 sub command15 {
1257 print "Specify where the sendmail executable is located. Usually /usr/sbin/sendmail\n";
1258 print "[$WHT$sendmail_path$NRM]: $WHT";
1259 $new_sendmail_path = <STDIN>;
1260 if ( $new_sendmail_path eq "\n" ) {
1261 $new_sendmail_path = $sendmail_path;
1262 } else {
1263 $new_sendmail_path =~ s/[\r\n]//g;
1264 }
1265 return $new_sendmail_path;
1266 }
1267
1268 # Extra sendmail arguments
1269 sub command_sendmail_args {
1270 print "Specify additional sendmail program arguments.\n";
1271 print "\n";
1272 print "Make sure that arguments are supported by your sendmail program. -f argument \n";
1273 print "is added automatically by SquirrelMail scripts. Variable defaults to standard\n";
1274 print "/usr/sbin/sendmail arguments. If you use qmail-inject, nbsmtp or any other \n";
1275 print "sendmail wrapper, which does not support -i and -t arguments, set variable to\n";
1276 print "empty string or use arguments suitable for your mailer.\n";
1277 print "\n";
1278 print "[$WHT$sendmail_args$NRM]: $WHT";
1279 $new_sendmail_args = <STDIN>;
1280 if ( $new_sendmail_args eq "\n" ) {
1281 $new_sendmail_args = $sendmail_args;
1282 } else {
1283 # strip linefeeds and crs.
1284 $new_sendmail_args =~ s/[\r\n]//g;
1285 }
1286 return trim($new_sendmail_args);
1287 }
1288
1289 # smtpServerAddress
1290 sub command16 {
1291 print "This is the hostname of your SMTP server.\n";
1292 print "[$WHT$smtpServerAddress$NRM]: $WHT";
1293 $new_smtpServerAddress = <STDIN>;
1294 if ( $new_smtpServerAddress eq "\n" ) {
1295 $new_smtpServerAddress = $smtpServerAddress;
1296 } else {
1297 $new_smtpServerAddress =~ s/[\r\n]//g;
1298 }
1299 return $new_smtpServerAddress;
1300 }
1301
1302 # smtpPort
1303 sub command17 {
1304 print "This is the port to connect to for SMTP. Usually 25.\n";
1305 print "[$WHT$smtpPort$NRM]: $WHT";
1306 $new_smtpPort = <STDIN>;
1307 if ( $new_smtpPort eq "\n" ) {
1308 $new_smtpPort = $smtpPort;
1309 } else {
1310 $new_smtpPort =~ s/[\r\n]//g;
1311 }
1312 return $new_smtpPort;
1313 }
1314
1315 # pop before SMTP
1316 sub command18a {
1317 print "Do you wish to use POP3 before SMTP? Your server must\n";
1318 print "support this in order for SquirrelMail to work with it.\n";
1319
1320 $YesNo = 'n';
1321 $YesNo = 'y' if ( lc($pop_before_smtp) eq 'true' );
1322
1323 print "Use pop before SMTP (y/n) [$WHT$YesNo$NRM]: $WHT";
1324
1325 $new_pop_before_smtp = <STDIN>;
1326 $new_pop_before_smtp =~ tr/yn//cd;
1327 return 'true' if ( $new_pop_before_smtp eq "y" );
1328 return 'false' if ( $new_pop_before_smtp eq "n" );
1329 return $pop_before_smtp;
1330 }
1331
1332 # imap_server_type
1333 sub command19 {
1334 print "Each IMAP server has its own quirks. As much as we tried to stick\n";
1335 print "to standards, it doesn't help much if the IMAP server doesn't follow\n";
1336 print "the same principles. We have made some work-arounds for some of\n";
1337 print "these servers. If you would like to use them, please select your\n";
1338 print "IMAP server. If you do not wish to use these work-arounds, you can\n";
1339 print "set this to \"other\", and none will be used.\n";
1340 print $list_supported_imap_servers;
1341 print "\n";
1342 print " other = Not one of the above servers\n";
1343 print "\n";
1344 print "[$WHT$imap_server_type$NRM]: $WHT";
1345 $new_imap_server_type = <STDIN>;
1346
1347 if ( $new_imap_server_type eq "\n" ) {
1348 $new_imap_server_type = $imap_server_type;
1349 } else {
1350 $new_imap_server_type =~ s/[\r\n]//g;
1351 }
1352 return $new_imap_server_type;
1353 }
1354
1355 # invert_time
1356 sub command110 {
1357 print "Sometimes the date of messages sent is messed up (off by a few hours\n";
1358 print "on some machines). Typically this happens if the system doesn't support\n";
1359 print "tm_gmtoff. It will happen only if your time zone is \"negative\".\n";
1360 print "This most often occurs on Solaris 7 machines in the United States.\n";
1361 print "By default, this is off. It should be kept off unless problems surface\n";
1362 print "about the time that messages are sent.\n";
1363 print " no = Do NOT fix time -- almost always correct\n";
1364 print " yes = Fix the time for this system\n";
1365
1366 $YesNo = 'n';
1367 $YesNo = 'y' if ( lc($invert_time) eq 'true' );
1368
1369 print "Fix the time for this system (y/n) [$WHT$YesNo$NRM]: $WHT";
1370
1371 $new_invert_time = <STDIN>;
1372 $new_invert_time =~ tr/yn//cd;
1373 return 'true' if ( $new_invert_time eq "y" );
1374 return 'false' if ( $new_invert_time eq "n" );
1375 return $invert_time;
1376 }
1377
1378 sub command111 {
1379 print "This is the delimiter that your IMAP server uses to distinguish between\n";
1380 print "folders. For example, Cyrus uses '.' as the delimiter and a complete\n";
1381 print "folder would look like 'INBOX.Friends.Bob', while UW uses '/' and would\n";
1382 print "look like 'INBOX/Friends/Bob'. Normally this should be left at 'detect'\n";
1383 print "but if you are sure you know what delimiter your server uses, you can\n";
1384 print "specify it here.\n";
1385 print "\nTo have it autodetect the delimiter, set it to 'detect'.\n\n";
1386 print "[$WHT$optional_delimiter$NRM]: $WHT";
1387 $new_optional_delimiter = <STDIN>;
1388
1389 if ( $new_optional_delimiter eq "\n" ) {
1390 $new_optional_delimiter = $optional_delimiter;
1391 } else {
1392 $new_optional_delimiter =~ s/[\r\n]//g;
1393 }
1394 return $new_optional_delimiter;
1395 }
1396 # IMAP authentication type
1397 # Possible values: login, plain, cram-md5, digest-md5
1398 # Now offers to detect supported mechs, assuming server & port are set correctly
1399
1400 sub command112a {
1401 if ($use_imap_tls ne "0") {
1402 # 1. Script does not handle TLS.
1403 # 2. Server does not have to declare all supported authentication mechs when
1404 # STARTTLS is used. Supported mechs are declared only after STARTTLS.
1405 print "Auto-detection of login methods is unavailable when using TLS or STARTTLS.\n";
1406 } else {
1407 print "If you have already set the hostname and port number, I can try to\n";
1408 print "detect the mechanisms your IMAP server supports.\n";
1409 print "I will try to detect CRAM-MD5 and DIGEST-MD5 support. I can't test\n";
1410 print "for \"login\" or \"plain\" without knowing a username and password.\n";
1411 print "Auto-detecting is optional - you can safely say \"n\" here.\n";
1412 print "\nTry to detect supported mechanisms? [y/N]: ";
1413 $inval=<STDIN>;
1414 chomp($inval);
1415 if ($inval =~ /^y\b/i) {
1416 # Yes, let's try to detect.
1417 print "Trying to detect IMAP capabilities...\n";
1418 my $host = $imapServerAddress . ':'. $imapPort;
1419 print "CRAM-MD5:\t";
1420 my $tmp = detect_auth_support('IMAP',$host,'CRAM-MD5');
1421 if (defined($tmp)) {
1422 if ($tmp eq 'YES') {
1423 print "$WHT SUPPORTED$NRM\n";
1424 } else {
1425 print "$WHT NOT SUPPORTED$NRM\n";
1426 }
1427 } else {
1428 print $WHT . " ERROR DETECTING$NRM\n";
1429 }
1430
1431 print "DIGEST-MD5:\t";
1432 $tmp = detect_auth_support('IMAP',$host,'DIGEST-MD5');
1433 if (defined($tmp)) {
1434 if ($tmp eq 'YES') {
1435 print "$WHT SUPPORTED$NRM\n";
1436 } else {
1437 print "$WHT NOT SUPPORTED$NRM\n";
1438 }
1439 } else {
1440 print $WHT . " ERROR DETECTING$NRM\n";
1441 }
1442
1443 }
1444 }
1445 print "\nWhat authentication mechanism do you want to use for IMAP connections?\n\n";
1446 print $WHT . "login" . $NRM . " - Plaintext. If you can do better, you probably should.\n";
1447 print $WHT . "plain" . $NRM . " - SASL PLAIN. If you need this, you already know it.\n";
1448 print $WHT . "cram-md5" . $NRM . " - Slightly better than plaintext methods.\n";
1449 print $WHT . "digest-md5" . $NRM . " - Privacy protection - better than cram-md5.\n";
1450 print "\n*** YOUR IMAP SERVER MUST SUPPORT THE MECHANISM YOU CHOOSE HERE ***\n";
1451 print "If you don't understand or are unsure, you probably want \"login\"\n\n";
1452 print "login, plain, cram-md5, or digest-md5 [$WHT$imap_auth_mech$NRM]: $WHT";
1453 $inval=<STDIN>;
1454 chomp($inval);
1455 if ( ($inval =~ /^cram-md5\b/i) || ($inval =~ /^digest-md5\b/i) || ($inval =~ /^login\b/i) || ($inval =~ /^plain\b/i)) {
1456 return lc($inval);
1457 } else {
1458 # user entered garbage or default value so nothing needs to be set
1459 return $imap_auth_mech;
1460 }
1461 }
1462
1463
1464 # SMTP authentication type
1465 # Possible choices: none, plain, cram-md5, digest-md5
1466 sub command112b {
1467 if ($use_smtp_tls ne "0") {
1468 print "Auto-detection of login methods is unavailable when using TLS or STARTTLS.\n";
1469 } elsif (eval ("use IO::Socket; 1")) {
1470 # try loading IO::Socket module
1471 print "If you have already set the hostname and port number, I can try to\n";
1472 print "automatically detect some of the mechanisms your SMTP server supports.\n";
1473 print "Auto-detection is *optional* - you can safely say \"n\" here.\n";
1474 print "\nTry to detect auth mechanisms? [y/N]: ";
1475 $inval=<STDIN>;
1476 chomp($inval);
1477 if ($inval =~ /^y\b/i) {
1478 # Yes, let's try to detect.
1479 print "Trying to detect supported methods (SMTP)...\n";
1480
1481 # Special case!
1482 # Check none by trying to relay to junk@microsoft.com
1483 $host = $smtpServerAddress . ':' . $smtpPort;
1484 my $sock = IO::Socket::INET->new($host);
1485 print "Testing none:\t\t$WHT";
1486 if (!defined($sock)) {
1487 print " ERROR TESTING\n";
1488 close $sock;
1489 } else {
1490 $got = <$sock>; # Discard greeting
1491 print $sock "HELO $domain\r\n";
1492 $got = <$sock>; # Discard
1493 print $sock "MAIL FROM:<tester\@squirrelmail.org>\r\n";
1494 $got = <$sock>; # Discard
1495 print $sock "RCPT TO:<junk\@microsoft.com\r\n";
1496 $got = <$sock>; # This is the important line
1497 if ($got =~ /^250\b/) { # SMTP will relay without auth
1498 print "SUPPORTED$NRM\n";
1499 } else {
1500 print "NOT SUPPORTED$NRM\n";
1501 }
1502 print $sock "RSET\r\n";
1503 print $sock "QUIT\r\n";
1504 close $sock;
1505 }
1506 # Try login (SquirrelMail default)
1507 print "Testing login:\t\t";
1508 $tmp=detect_auth_support('SMTP',$host,'LOGIN');
1509 if (defined($tmp)) {
1510 if ($tmp eq 'YES') {
1511 print $WHT . "SUPPORTED$NRM\n";
1512 } else {
1513 print $WHT . "NOT SUPPORTED$NRM\n";
1514 }
1515 } else {
1516 print $WHT . "ERROR DETECTING$NRM\n";
1517 }
1518
1519 # Try CRAM-MD5
1520 print "Testing CRAM-MD5:\t";
1521 $tmp=detect_auth_support('SMTP',$host,'CRAM-MD5');
1522 if (defined($tmp)) {
1523 if ($tmp eq 'YES') {
1524 print $WHT . "SUPPORTED$NRM\n";
1525 } else {
1526 print $WHT . "NOT SUPPORTED$NRM\n";
1527 }
1528 } else {
1529 print $WHT . "ERROR DETECTING$NRM\n";
1530 }
1531
1532
1533 print "Testing DIGEST-MD5:\t";
1534 $tmp=detect_auth_support('SMTP',$host,'DIGEST-MD5');
1535 if (defined($tmp)) {
1536 if ($tmp eq 'YES') {
1537 print $WHT . "SUPPORTED$NRM\n";
1538 } else {
1539 print $WHT . "NOT SUPPORTED$NRM\n";
1540 }
1541 } else {
1542 print $WHT . "ERROR DETECTING$NRM\n";
1543 }
1544 }
1545 }
1546 print "\nWhat authentication mechanism do you want to use for SMTP connections?\n";
1547 print $WHT . "none" . $NRM . " - Your SMTP server does not require authorization.\n";
1548 print $WHT . "login" . $NRM . " - Plaintext. If you can do better, you probably should.\n";
1549 print $WHT . "plain" . $NRM . " - SASL PLAIN. You already know it if you need this.\n";
1550 print $WHT . "cram-md5" . $NRM . " - Slightly better than plaintext.\n";
1551 print $WHT . "digest-md5" . $NRM . " - Privacy protection - better than cram-md5.\n";
1552 print $WHT . "\n*** YOUR SMTP SERVER MUST SUPPORT THE MECHANISM YOU CHOOSE HERE ***\n" . $NRM;
1553 print "If you don't understand or are unsure, you probably want \"none\"\n\n";
1554 print "none, login, cram-md5, or digest-md5 [$WHT$smtp_auth_mech$NRM]: $WHT";
1555 $inval=<STDIN>;
1556 chomp($inval);
1557 if ($inval =~ /^none\b/i) {
1558 # remove sitewide smtp authentication information
1559 $smtp_sitewide_user = '';
1560 $smtp_sitewide_pass = '';
1561 # SMTP doesn't necessarily require logins
1562 return "none";
1563 } elsif ( ($inval =~ /^cram-md5\b/i) || ($inval =~ /^digest-md5\b/i) ||
1564 ($inval =~ /^login\b/i) || ($inval =~/^plain\b/i)) {
1565 command_smtp_sitewide_userpass($inval);
1566 return lc($inval);
1567 } elsif (trim($inval) eq '') {
1568 # user selected default value
1569 command_smtp_sitewide_userpass($smtp_auth_mech);
1570 return $smtp_auth_mech;
1571 } else {
1572 # user entered garbage
1573 return $smtp_auth_mech;
1574 }
1575 }
1576
1577 sub command_smtp_sitewide_userpass($) {
1578 # get first function argument
1579 my $auth_mech = shift(@_);
1580 my $default, $tmp;
1581 $auth_mech = lc(trim($auth_mech));
1582 if ($auth_mech eq 'none') {
1583 return;
1584 }
1585 print "SMTP authentication uses IMAP username and password by default.\n";
1586 print "\n";
1587 print "Would you like to use other login and password for all SquirrelMail \n";
1588 print "SMTP connections?";
1589 if ($smtp_sitewide_user ne '') {
1590 $default = 'y';
1591 print " [Y/n]:";
1592 } else {
1593 $default = 'n';
1594 print " [y/N]:";
1595 }
1596 $tmp=<STDIN>;
1597 $tmp = trim($tmp);
1598
1599 if ($tmp eq '') {
1600 $tmp = $default;
1601 } else {
1602 $tmp = lc($tmp);
1603 }
1604
1605 if ($tmp eq 'n') {
1606 $smtp_sitewide_user = '';
1607 $smtp_sitewide_pass = '';
1608 } elsif ($tmp eq 'y') {
1609 print "Enter username [$smtp_sitewide_user]:";
1610 my $new_user = <STDIN>;
1611 $new_user = trim($new_user);
1612 if ($new_user ne '') {
1613 $smtp_sitewide_user = $new_user;
1614 }
1615 if ($smtp_sitewide_user ne '') {
1616 print "If you don't enter any password, current sitewide password will be used.\n";
1617 print "If you enter space, password will be set to empty string.\n";
1618 print "Enter password:";
1619 my $new_pass = <STDIN>;
1620 if ($new_pass ne "\n") {
1621 $smtp_sitewide_pass = trim($new_pass);
1622 }
1623 } else {
1624 print "Invalid input. You must set username used for SMTP authentication.\n";
1625 print "Click enter to continue\n";
1626 $tmp = <STDIN>;
1627 }
1628 } else {
1629 print "Invalid input\n";
1630 print "Click enter to continue\n";
1631 $tmp = <STDIN>;
1632 }
1633 }
1634
1635 # Sub adds information about SMTP authentication type to menu
1636 sub display_smtp_sitewide_userpass() {
1637 my $ret = '';
1638 if ($smtp_auth_mech ne 'none') {
1639 if ($smtp_sitewide_user ne '') {
1640 $ret = ' (with custom username and password)';
1641 } else {
1642 $ret = ' (with IMAP username and password)';
1643 }
1644 }
1645 return $ret;
1646 }
1647
1648 # TLS
1649 # This sub is reused for IMAP and SMTP
1650 # Args: service name, default value
1651 sub command_use_tls {
1652 my($default_val,$service,$inval);
1653 $service=$_[0];
1654 $default_val=$_[1];
1655 print "TLS (Transport Layer Security) encrypts the traffic between server and client.\n";
1656 print "STARTTLS extensions allow to start encryption on existing plain text connection.\n";
1657 print "These options add specific PHP and IMAP server configuration requirements.\n";
1658 print "See SquirrelMail documentation about connection security.\n";
1659 print "\n";
1660 print "If your " . $service . " server is localhost, you can safely disable this.\n";
1661 print "If it is remote, you may wish to seriously consider enabling this.\n";
1662 $valid_input=0;
1663 while ($valid_input eq 0) {
1664 print "\nSelect connection security model:\n";
1665 print " 0 - Use plain text connection\n";
1666 print " 1 - Use TLS connection\n";
1667 print " 2 - Use STARTTLS extension\n";
1668 print "Select [$default_val]: ";
1669 $inval=<STDIN>;
1670 $inval=trim($inval);
1671 if ($inval =~ /^[012]$/ || $inval eq '') {
1672 $valid_input = 1;
1673 }
1674 }
1675 if ($inval ne '') {$default_val = $inval};
1676 return $default_val;
1677 }
1678
1679 # This sub is used to display human readable text for
1680 # $use_imap_tls and $use_smtp_tls values in conf.pl menu
1681 sub display_use_tls($) {
1682 my $val = shift(@_);
1683 my $ret = 'disabled';
1684 if ($val eq '2') {
1685 $ret = 'STARTTLS';
1686 } elsif ($val eq '1') {
1687 $ret = 'TLS';
1688 }
1689 return $ret;
1690 }
1691
1692 # $encode_header_key
1693 sub command114{
1694 print "Encryption key allows to hide SquirrelMail Received: headers\n";
1695 print "in outbound messages. Interface uses encryption key to encode\n";
1696 print "username, remote address and proxied address, then stores encoded\n";
1697 print "information in X-Squirrel-* headers.\n";
1698 print "\n";
1699 print "Warning: used encryption function is not bulletproof. When used\n";
1700 print "with static encryption keys, it provides only minimal security\n";
1701 print "measures and information can be decoded quickly.\n";
1702 print "\n";
1703 print "Encoded information can be decoded with decrypt_headers.php script\n";
1704 print "from SquirrelMail contrib/ directory.\n";
1705 print "\n";
1706 print "Enter encryption key: ";
1707 $new_encode_header_key = <STDIN>;
1708 if ( $new_encode_header_key eq "\n" ) {
1709 $new_encode_header_key = $encode_header_key;
1710 } else {
1711 $new_encode_header_key =~ s/[\r\n]//g;
1712 }
1713 return $new_encode_header_key;
1714 }
1715
1716 # MOTD
1717 sub command71 {
1718 print "\nYou can now create the welcome message that is displayed\n";
1719 print "every time a user logs on. You can use HTML or just plain\n";
1720 print
1721 "text. If you do not wish to have one, just make it blank.\n\n(Type @ on a blank line to exit)\n";
1722
1723 $new_motd = "";
1724 do {
1725 print "] ";
1726 $line = <STDIN>;
1727 $line =~ s/[\r\n]//g;
1728 if ( $line ne "@" ) {
1729 $line =~ s/ /\&nbsp;\&nbsp;/g;
1730 $line =~ s/\t/\&nbsp;\&nbsp;\&nbsp;\&nbsp;/g;
1731 $line =~ s/$/ /;
1732 $line =~ s/\"/\\\"/g;
1733
1734 $new_motd = $new_motd . $line;
1735 }
1736 } while ( $line ne "@" );
1737 return $new_motd;
1738 }
1739
1740 ################# PLUGINS ###################
1741
1742 sub command81 {
1743 $command =~ s/[\s\n\r]*//g;
1744 if ( $command > 0 ) {
1745 $command = $command - 1;
1746 if ( $command <= $#plugins ) {
1747 @newplugins = ();
1748 $ct = 0;
1749 while ( $ct <= $#plugins ) {
1750 if ( $ct != $command ) {
1751 @newplugins = ( @newplugins, $plugins[$ct] );
1752 }
1753 $ct++;
1754 }
1755 @plugins = @newplugins;
1756 } elsif ( $command <= $#plugins + $#unused_plugins + 1 ) {
1757 $num = $command - $#plugins - 1;
1758 @newplugins = @plugins;
1759 $ct = 0;
1760 while ( $ct <= $#unused_plugins ) {
1761 if ( $ct == $num ) {
1762 @newplugins = ( @newplugins, $unused_plugins[$ct] );
1763 }
1764 $ct++;
1765 }
1766 @plugins = @newplugins;
1767 }
1768 }
1769 return @plugins;
1770 }
1771
1772 # disable_plugins_user
1773 sub command82 {
1774 print "When all active plugins are disabled, they can be disabled only\n";
1775 print "for the one user named here. If left blank, plugins will be\n";
1776 print "disabled for ALL users. This setting has no effect if plugins\n";
1777 print "are not disabled.\n";
1778 print "\n";
1779 print "This must be the exact IMAP login name for the desired user.\n";
1780 print "\n";
1781 print "[$WHT$disable_plugins_user$NRM]: $WHT";
1782 $new_disable_plugins_user = <STDIN>;
1783 if ( $new_disable_plugins_user eq "\n" ) {
1784 $new_disable_plugins_user = $disable_plugins_user;
1785 } else {
1786 $new_disable_plugins_user =~ s/[\r\n]//g;
1787 }
1788 return $new_disable_plugins_user;
1789 }
1790
1791 ################# FOLDERS ###################
1792
1793 # default_folder_prefix
1794 sub command21 {
1795 print "Some IMAP servers (UW, for example) store mail and folders in\n";
1796 print "your user space in a separate subdirectory. This is where you\n";
1797 print "specify what that directory is.\n";
1798 print "\n";
1799 print "EXAMPLE: mail/";
1800 print "\n";
1801 print "NOTE: If you use Cyrus, or some server that would not use this\n";
1802 print " option, you must set this to 'none'.\n";
1803 print "\n";
1804 print "[$WHT$default_folder_prefix$NRM]: $WHT";
1805 $new_default_folder_prefix = <STDIN>;
1806
1807 if ( $new_default_folder_prefix eq "\n" ) {
1808 $new_default_folder_prefix = $default_folder_prefix;
1809 } else {
1810 $new_default_folder_prefix =~ s/[\r\n]//g;
1811 }
1812 if ( ( $new_default_folder_prefix =~ /^\s*$/ ) || ( $new_default_folder_prefix =~ m/^none$/i ) ) {
1813 $new_default_folder_prefix = "";
1814 } else {
1815 # add the trailing delimiter only if we know what the server is.
1816 if (($imap_server_type eq 'cyrus' and
1817 $optional_delimiter eq 'detect') or
1818 ($imap_server_type eq 'courier' and
1819 $optional_delimiter eq 'detect')) {
1820 $new_default_folder_prefix =~ s/\.*$/\./;
1821 } elsif ($imap_server_type eq 'uw' and
1822 $optional_delimiter eq 'detect') {
1823 $new_default_folder_prefix =~ s/\/*$/\//;
1824 }
1825 }
1826 return $new_default_folder_prefix;
1827 }
1828
1829 # Show Folder Prefix
1830 sub command22 {
1831 print "It is possible to set up the default folder prefix as a user\n";
1832 print "specific option, where each user can specify what their mail\n";
1833 print "folder is. If you set this to false, they will never see the\n";
1834 print "option, but if it is true, this option will appear in the\n";
1835 print "'options' section.\n";
1836 print "\n";
1837 print "NOTE: You set the default folder prefix in option '1' of this\n";
1838 print " section. That will be the default if the user doesn't\n";
1839 print " specify anything different.\n";
1840 print "\n";
1841
1842 if ( lc($show_prefix_option) eq 'true' ) {
1843 $default_value = "y";
1844 } else {
1845 $default_value = "n";
1846 }
1847 print "\n";
1848 print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
1849 $new_show = <STDIN>;
1850 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1851 $show_prefix_option = 'true';
1852 } else {
1853 $show_prefix_option = 'false';
1854 }
1855 return $show_prefix_option;
1856 }
1857
1858 # Trash Folder
1859 sub command23a {
1860 print "You can now specify where the default trash folder is located.\n";
1861 print "On servers where you do not want this, you can set it to anything\n";
1862 print "and set option 6 to false.\n";
1863 print "\n";
1864 print "This is relative to where the rest of your email is kept. You do\n";
1865 print "not need to worry about their mail directory. If this folder\n";
1866 print "would be ~/mail/trash on the filesystem, you only need to specify\n";
1867 print "that this is 'trash', and be sure to put 'mail/' in option 1.\n";
1868 print "\n";
1869
1870 print "[$WHT$trash_folder$NRM]: $WHT";
1871 $new_trash_folder = <STDIN>;
1872 if ( $new_trash_folder eq "\n" ) {
1873 $new_trash_folder = $trash_folder;
1874 } else {
1875 if (check_imap_folder($new_trash_folder)) {
1876 $new_trash_folder =~ s/[\r\n]//g;
1877 } else {
1878 $new_trash_folder = $trash_folder;
1879 }
1880 }
1881 return $new_trash_folder;
1882 }
1883
1884 # Sent Folder
1885 sub command23b {
1886 print "This is where messages that are sent will be stored. SquirrelMail\n";
1887 print "by default puts a copy of all outgoing messages in this folder.\n";
1888 print "\n";
1889 print "This is relative to where the rest of your email is kept. You do\n";
1890 print "not need to worry about their mail directory. If this folder\n";
1891 print "would be ~/mail/sent on the filesystem, you only need to specify\n";
1892 print "that this is 'sent', and be sure to put 'mail/' in option 1.\n";
1893 print "\n";
1894
1895 print "[$WHT$sent_folder$NRM]: $WHT";
1896 $new_sent_folder = <STDIN>;
1897 if ( $new_sent_folder eq "\n" ) {
1898 $new_sent_folder = $sent_folder;
1899 } else {
1900 if (check_imap_folder($new_sent_folder)) {
1901 $new_sent_folder =~ s/[\r\n]//g;
1902 } else {
1903 $new_sent_folder = $sent_folder;
1904 }
1905 }
1906 return $new_sent_folder;
1907 }
1908
1909 # Draft Folder
1910 sub command23c {
1911 print "You can now specify where the default draft folder is located.\n";
1912 print "On servers where you do not want this, you can set it to anything\n";
1913 print "and set option 9 to false.\n";
1914 print "\n";
1915 print "This is relative to where the rest of your email is kept. You do\n";
1916 print "not need to worry about their mail directory. If this folder\n";
1917 print "would be ~/mail/drafts on the filesystem, you only need to specify\n";
1918 print "that this is 'drafts', and be sure to put 'mail/' in option 1.\n";
1919 print "\n";
1920
1921 print "[$WHT$draft_folder$NRM]: $WHT";
1922 $new_draft_folder = <STDIN>;
1923 if ( $new_draft_folder eq "\n" ) {
1924 $new_draft_folder = $draft_folder;
1925 } else {
1926 if (check_imap_folder($new_draft_folder)) {
1927 $new_draft_folder =~ s/[\r\n]//g;
1928 } else {
1929 $new_draft_folder = $draft_folder;
1930 }
1931 }
1932 return $new_draft_folder;
1933 }
1934
1935 # default move to trash
1936 sub command24a {
1937 print "By default, should messages get moved to the trash folder? You\n";
1938 print "can specify the default trash folder in option 3. If this is set\n";
1939 print "to false, messages will get deleted immediately without moving\n";
1940 print "to the trash folder.\n";
1941 print "\n";
1942 print "Trash folder is currently: $trash_folder\n";
1943 print "\n";
1944
1945 if ( lc($default_move_to_trash) eq 'true' ) {
1946 $default_value = "y";
1947 } else {
1948 $default_value = "n";
1949 }
1950 print "By default, move to trash (y/n) [$WHT$default_value$NRM]: $WHT";
1951 $new_show = <STDIN>;
1952 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1953 $default_move_to_trash = 'true';
1954 } else {
1955 $default_move_to_trash = 'false';
1956 }
1957 return $default_move_to_trash;
1958 }
1959
1960 # default move to sent (save sent messages)
1961 sub command24b {
1962 print "By default, should copies of outgoing messages get saved in the\n";
1963 print "sent folder? You can specify the default sent folder in option 4.\n";
1964 print "If this is set to false, messages will get sent and no copy will\n";
1965 print "be made.\n";
1966 print "\n";
1967 print "Sent folder is currently: $sent_folder\n";
1968 print "\n";
1969
1970 if ( lc($default_move_to_sent) eq 'true' ) {
1971 $default_value = "y";
1972 } else {
1973 $default_value = "n";
1974 }
1975 print "By default, save sent messages (y/n) [$WHT$default_value$NRM]: $WHT";
1976 $new_show = <STDIN>;
1977 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
1978 $default_move_to_sent = 'true';
1979 } else {
1980 $default_move_to_sent = 'false';
1981 }
1982 return $default_move_to_sent;
1983 }
1984
1985 # default save as draft
1986 sub command24c {
1987 print "By default, should the save to draft option be shown? You can\n";
1988 print "specify the default drafts folder in option 5. If this is set\n";
1989 print "to false, users will not be shown the save to draft option.\n";
1990 print "\n";
1991 print "Drafts folder is currently: $draft_folder\n";
1992 print "\n";
1993
1994 if ( lc($default_save_as_draft) eq 'true' ) {
1995 $default_value = "y";
1996 } else {
1997 $default_value = "n";
1998 }
1999 print "By default, save as draft (y/n) [$WHT$default_value$NRM]: $WHT";
2000 $new_show = <STDIN>;
2001 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2002 $default_save_as_draft = 'true';
2003 } else {
2004 $default_save_as_draft = 'false';
2005 }
2006 return $default_save_as_draft;
2007 }
2008
2009 # List special folders first
2010 sub command27 {
2011 print "SquirrelMail has what we call 'special folders' that are not\n";
2012 print "manipulated and viewed like normal folders. Some examples of\n";
2013 print "these folders would be INBOX, Trash, Sent, etc. This option\n";
2014 print "Simply asks if you want these folders listed first in the folder\n";
2015 print "listing.\n";
2016 print "\n";
2017
2018 if ( lc($list_special_folders_first) eq 'true' ) {
2019 $default_value = "y";
2020 } else {
2021 $default_value = "n";
2022 }
2023 print "\n";
2024 print "List first (y/n) [$WHT$default_value$NRM]: $WHT";
2025 $new_show = <STDIN>;
2026 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2027 $list_special_folders_first = 'true';
2028 } else {
2029 $list_special_folders_first = 'false';
2030 }
2031 return $list_special_folders_first;
2032 }
2033
2034 # Show special folders color
2035 sub command28 {
2036 print "SquirrelMail has what we call 'special folders' that are not\n";
2037 print "manipulated and viewed like normal folders. Some examples of\n";
2038 print "these folders would be INBOX, Trash, Sent, etc. This option\n";
2039 print "wants to know if we should display special folders in a\n";
2040 print "color than the other folders.\n";
2041 print "\n";
2042
2043 if ( lc($use_special_folder_color) eq 'true' ) {
2044 $default_value = "y";
2045 } else {
2046 $default_value = "n";
2047 }
2048 print "\n";
2049 print "Show color (y/n) [$WHT$default_value$NRM]: $WHT";
2050 $new_show = <STDIN>;
2051 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2052 $use_special_folder_color = 'true';
2053 } else {
2054 $use_special_folder_color = 'false';
2055 }
2056 return $use_special_folder_color;
2057 }
2058
2059 # Auto expunge
2060 sub command29 {
2061 print "The way that IMAP handles deleting messages is as follows. You\n";
2062 print "mark the message as deleted, and then to 'really' delete it, you\n";
2063 print "expunge it. This option asks if you want to just have messages\n";
2064 print "marked as deleted, or if you want SquirrelMail to expunge the \n";
2065 print "messages too.\n";
2066 print "\n";
2067
2068 if ( lc($auto_expunge) eq 'true' ) {
2069 $default_value = "y";
2070 } else {
2071 $default_value = "n";
2072 }
2073 print "Auto expunge (y/n) [$WHT$default_value$NRM]: $WHT";
2074 $new_show = <STDIN>;
2075 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2076 $auto_expunge = 'true';
2077 } else {
2078 $auto_expunge = 'false';
2079 }
2080 return $auto_expunge;
2081 }
2082
2083 # Default sub of inbox
2084 sub command210 {
2085 print "Some IMAP servers (Cyrus) have all folders as subfolders of INBOX.\n";
2086 print "This can cause some confusion in folder creation for users when\n";
2087 print "they try to create folders and don't put it as a subfolder of INBOX\n";
2088 print "and get permission errors. This option asks if you want folders\n";
2089 print "to be subfolders of INBOX by default.\n";
2090 print "\n";
2091
2092 if ( lc($default_sub_of_inbox) eq 'true' ) {
2093 $default_value = "y";
2094 } else {
2095 $default_value = "n";
2096 }
2097 print "Default sub of INBOX (y/n) [$WHT$default_value$NRM]: $WHT";
2098 $new_show = <STDIN>;
2099 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2100 $default_sub_of_inbox = 'true';
2101 } else {
2102 $default_sub_of_inbox = 'false';
2103 }
2104 return $default_sub_of_inbox;
2105 }
2106
2107 # Show contain subfolder option
2108 sub command211 {
2109 print "Some IMAP servers (UW) make it so that there are two types of\n";
2110 print "folders. Those that contain messages, and those that contain\n";
2111 print "subfolders. If this is the case for your server, set this to\n";
2112 print "true, and it will ask the user whether the folder they are\n";
2113 print "creating contains subfolders or messages.\n";
2114 print "\n";
2115
2116 if ( lc($show_contain_subfolders_option) eq 'true' ) {
2117 $default_value = "y";
2118 } else {
2119 $default_value = "n";
2120 }
2121 print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
2122 $new_show = <STDIN>;
2123 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2124 $show_contain_subfolders_option = 'true';
2125 } else {
2126 $show_contain_subfolders_option = 'false';
2127 }
2128 return $show_contain_subfolders_option;
2129 }
2130
2131 # Default Unseen Notify
2132 sub command212 {
2133 print "This option specifies where the users will receive notification\n";
2134 print "about unseen messages by default. This is of course an option that\n";
2135 print "can be changed on a user level.\n";
2136 print " 1 = No notification\n";
2137 print " 2 = Only on the INBOX\n";
2138 print " 3 = On all folders\n";
2139 print "\n";
2140
2141 print "Which one should be default (1,2,3)? [$WHT$default_unseen_notify$NRM]: $WHT";
2142 $new_show = <STDIN>;
2143 if ( $new_show =~ /^[123]\n/i ) {
2144 $default_unseen_notify = $new_show;
2145 }
2146 $default_unseen_notify =~ s/[\r\n]//g;
2147 return $default_unseen_notify;
2148 }
2149
2150 # Default Unseen Type
2151 sub command213 {
2152 print "Here you can define the default way that unseen messages will be displayed\n";
2153 print "to the user in the folder listing on the left side.\n";
2154 print " 1 = Only unseen messages (4)\n";
2155 print " 2 = Unseen and Total messages (4/27)\n";
2156 print "\n";
2157
2158 print "Which one should be default (1,2)? [$WHT$default_unseen_type$NRM]: $WHT";
2159 $new_show = <STDIN>;
2160 if ( $new_show =~ /^[12]\n/i ) {
2161 $default_unseen_type = $new_show;
2162 }
2163 $default_unseen_type =~ s/[\r\n]//g;
2164 return $default_unseen_type;
2165 }
2166
2167 # Auto create special folders
2168 sub command214 {
2169 print "Would you like the Sent, Trash, and Drafts folders to be created\n";
2170 print "automatically print for you when a user logs in? If the user\n";
2171 print "accidentally deletes their special folders, this option will\n";
2172 print "automatically create it again for them.\n";
2173 print "\n";
2174
2175 if ( lc($auto_create_special) eq 'true' ) {
2176 $default_value = "y";
2177 } else {
2178 $default_value = "n";
2179 }
2180 print "Auto create special folders? (y/n) [$WHT$default_value$NRM]: $WHT";
2181 $new_show = <STDIN>;
2182 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2183 $auto_create_special = 'true';
2184 } else {
2185 $auto_create_special = 'false';
2186 }
2187 return $auto_create_special;
2188 }
2189
2190 # Automatically delete folders
2191 sub command215 {
2192 if ( $imap_server_type eq "uw" ) {
2193 print "UW IMAP servers will not allow folders containing mail to also contain folders.\n";
2194 print "Deleting folders will bypass the trash folder and be immediately deleted\n\n";
2195 print "If this is not the correct value for your server,\n";
2196 print "please use option D on the Main Menu to configure your server correctly.\n\n";
2197 print "Press enter to continue...\n";
2198 $new_delete = <STDIN>;
2199 $delete_folder = 'true';
2200 } else {
2201 if ( $imap_server_type eq "courier" ) {
2202 print "Courier (or Courier-IMAP) IMAP servers may not support ";
2203 print "subfolders of Trash. \n";
2204 print "Specifically, if Courier is set to always move messages to Trash, \n";
2205 print "Trash will be treated by Courier as a special folder that does not \n";
2206 print "allow subfolders. \n\n";
2207 print "Please verify your Courier configuration, and test folder deletion \n";
2208 print "when changing this setting.\n\n";
2209 }
2210
2211 print "Are subfolders of the Trash supported by your IMAP server?\n";
2212 print "If so, should deleted folders be sent to Trash?\n";
2213 print "If not, say no (deleted folders should not be sent to Trash)\n\n";
2214 # reversal of logic.
2215 # question was: Should folders be automatically deleted instead of sent to trash..
2216 # we've changed the question to make it more clear,
2217 # and are here handling that to avoid changing the answers..
2218 if ( lc($delete_folder) eq 'true' ) {
2219 $default_value = "n";
2220 } else {
2221 $default_value = "y";
2222 }
2223 print "Send deleted folders to Trash? (y/n) [$WHT$default_value$NRM]: $WHT";
2224 $new_delete = <STDIN>;
2225 if ( ( $new_delete =~ /^y\n/i ) || ( ( $new_delete =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2226 $delete_folder = 'false';
2227 } else {
2228 $delete_folder = 'true';
2229 }
2230 }
2231 return $delete_folder;
2232 }
2233
2234 #noselect fix
2235 sub command216 {
2236 print "Some IMAP servers allow subfolders to exist even if the parent\n";
2237 print "folders do not. This fixes some problems with the folder list\n";
2238 print "when this is the case, causing the /NoSelect folders to be displayed\n";
2239 print "\n";
2240
2241 if ( lc($noselect_fix_enable) eq 'true' ) {
2242 $default_value = "y";
2243 } else {
2244 $default_value = "n";
2245 }
2246 print "enable noselect fix? (y/n) [$WHT$noselect_fix_enable$NRM]: $WHT";
2247 $noselect_fix_enable = <STDIN>;
2248 if ( ( $noselect_fix_enable =~ /^y\n/i ) || ( ( $noselect_fix_enable =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2249 $noselect_fix_enable = 'true';
2250 } else {
2251 $noselect_fix_enable = 'false';
2252 }
2253 return $noselect_fix_enable;
2254 }
2255 ############# GENERAL OPTIONS #####################
2256
2257 # Data directory
2258 sub command33a {
2259 print "Specify the location for your data directory.\n";
2260 print "You need to create this directory yourself.\n";
2261 print "The path name can be absolute or relative (to the config directory).\n";
2262 print "Here are two examples:\n";
2263 print " Absolute: /var/local/squirrelmail/data/\n";
2264 print " Relative: ../data/\n";
2265 print "Relative paths to directories outside of the SquirrelMail distribution\n";
2266 print "will be converted to their absolute path equivalents in config.php.\n\n";
2267 print "Note: There are potential security risks with having a writeable directory\n";
2268 print "under the web server's root directory (ex: /home/httpd/html).\n";
2269 print "For this reason, it is recommended to put the data directory\n";
2270 print "in an alternate location of your choice. \n";
2271 print "\n";
2272
2273 print "[$WHT$data_dir$NRM]: $WHT";
2274 $new_data_dir = <STDIN>;
2275 if ( $new_data_dir eq "\n" ) {
2276 $new_data_dir = $data_dir;
2277 } else {
2278 $new_data_dir =~ s/[\r\n]//g;
2279 }
2280 if ( $new_data_dir =~ /^\s*$/ ) {
2281 $new_data_dir = "";
2282 } else {
2283 $new_data_dir =~ s/\/*$//g;
2284 $new_data_dir =~ s/$/\//g;
2285 }
2286 return $new_data_dir;
2287 }
2288
2289 # Attachment directory
2290 sub command33b {
2291 print "Path to directory used for storing attachments while a mail is\n";
2292 print "being composed. The path name can be absolute or relative (to the\n";
2293 print "config directory). Here are two examples:\n";
2294 print " Absolute: /var/local/squirrelmail/attach/\n";
2295 print " Relative: ../attach/\n";
2296 print "Relative paths to directories outside of the SquirrelMail distribution\n";
2297 print "will be converted to their absolute path equivalents in config.php.\n\n";
2298 print "Note: There are a few security considerations regarding this\n";
2299 print "directory:\n";
2300 print " 1. It should have the permission 733 (rwx-wx-wx) to make it\n";
2301 print " impossible for a random person with access to the webserver\n";
2302 print " to list files in this directory. Confidential data might\n";
2303 print " be laying around in there.\n";
2304 print " Depending on your user:group assignments, 730 (rwx-wx---)\n";
2305 print " may be possible, and more secure (e.g. root:apache)\n";
2306 print " 2. Since the webserver is not able to list the files in the\n";
2307 print " content is also impossible for the webserver to delete files\n";
2308 print " lying around there for too long.\n";
2309 print " 3. It should probably be another directory than the data\n";
2310 print " directory specified in option 3.\n";
2311 print "\n";
2312
2313 print "[$WHT$attachment_dir$NRM]: $WHT";
2314 $new_attachment_dir = <STDIN>;
2315 if ( $new_attachment_dir eq "\n" ) {
2316 $new_attachment_dir = $attachment_dir;
2317 } else {
2318 $new_attachment_dir =~ s/[\r\n]//g;
2319 }
2320 if ( $new_attachment_dir =~ /^\s*$/ ) {
2321 $new_attachment_dir = "";
2322 } else {
2323 $new_attachment_dir =~ s/\/*$//g;
2324 $new_attachment_dir =~ s/$/\//g;
2325 }
2326 return $new_attachment_dir;
2327 }
2328
2329 sub command33c {
2330 print "The directory hash level setting allows you to configure the level\n";
2331 print "of hashing that SquirrelMail employs in your data and attachment\n";
2332 print "directories. This value must be an integer ranging from 0 to 4.\n";
2333 print "When this value is set to 0, SquirrelMail will simply store all\n";
2334 print "files as normal in the data and attachment directories. However,\n";
2335 print "when set to a value from 1 to 4, a simple hashing scheme will be\n";
2336 print "used to organize the files in this directory. In short, the crc32\n";
2337 print "value for a username will be computed. Then, up to the first 4\n";
2338 print "digits of the hash, as set by this configuration value, will be\n";
2339 print "used to directory hash the files for that user in the data and\n";
2340 print "attachment directory. This allows for better performance on\n";
2341 print "servers with larger numbers of users.\n";
2342 print "\n";
2343
2344 print "[$WHT$dir_hash_level$NRM]: $WHT";
2345 $new_dir_hash_level = <STDIN>;
2346 if ( $new_dir_hash_level eq "\n" ) {
2347 $new_dir_hash_level = $dir_hash_level;
2348 } else {
2349 $new_dir_hash_level =~ s/[\r\n]//g;
2350 }
2351 if ( ( int($new_dir_hash_level) < 0 )
2352 || ( int($new_dir_hash_level) > 4 )
2353 || !( int($new_dir_hash_level) eq $new_dir_hash_level ) ) {
2354 print "Invalid Directory Hash Level.\n";
2355 print "Value must be an integer ranging from 0 to 4\n";
2356 print "Hit enter to continue.\n";
2357 $enter_key = <STDIN>;
2358
2359 $new_dir_hash_level = $dir_hash_level;
2360 }
2361
2362 return $new_dir_hash_level;
2363 }
2364
2365 sub command35 {
2366 print "This is the default size (in pixels) of the left folder list.\n";
2367 print "Default is 200, but you can set it to whatever you wish. This\n";
2368 print "is a user preference, so this will only show up as their default.\n";
2369 print "\n";
2370 print "[$WHT$default_left_size$NRM]: $WHT";
2371 $new_default_left_size = <STDIN>;
2372 if ( $new_default_left_size eq "\n" ) {
2373 $new_default_left_size = $default_left_size;
2374 } else {
2375 $new_default_left_size =~ s/[\r\n]//g;
2376 }
2377 return $new_default_left_size;
2378 }
2379
2380 sub command36 {
2381 print "Some IMAP servers only have lowercase letters in the usernames\n";
2382 print "but they still allow people with uppercase to log in. This\n";
2383 print "causes a problem with the user's preference files. This option\n";
2384 print "transparently changes all usernames to lowercase.";
2385 print "\n";
2386
2387 if ( lc($force_username_lowercase) eq 'true' ) {
2388 $default_value = "y";
2389 } else {
2390 $default_value = "n";
2391 }
2392 print "Convert usernames to lowercase (y/n) [$WHT$default_value$NRM]: $WHT";
2393 $new_show = <STDIN>;
2394 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2395 return 'true';
2396 }
2397 return 'false';
2398 }
2399
2400 sub command37 {
2401 print "";
2402 print "\n";
2403
2404 if ( lc($default_use_priority) eq 'true' ) {
2405 $default_value = "y";
2406 } else {
2407 $default_value = "n";
2408 }
2409
2410 print "Allow users to specify priority of outgoing mail (y/n) [$WHT$default_value$NRM]: $WHT";
2411 $new_show = <STDIN>;
2412 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2413 return 'true';
2414 }
2415 return 'false';
2416 }
2417
2418 sub command38 {
2419 print "";
2420 print "\n";
2421
2422 if ( lc($hide_sm_attributions) eq 'true' ) {
2423 $default_value = "y";
2424 } else {
2425 $default_value = "n";
2426 }
2427
2428 print "Hide SM attributions (y/n) [$WHT$default_value$NRM]: $WHT";
2429 $new_show = <STDIN>;
2430 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2431 return 'true';
2432 }
2433 return 'false';
2434 }
2435
2436 sub command39 {
2437 print "";
2438 print "\n";
2439
2440 if ( lc($default_use_mdn) eq 'true' ) {
2441 $default_value = "y";
2442 } else {
2443 $default_value = "n";
2444 }
2445
2446 print "Enable support for read/delivery receipt support (y/n) [$WHT$default_value$NRM]: $WHT";
2447 $new_show = <STDIN>;
2448 if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2449 return 'true';
2450 }
2451 return 'false';
2452 }
2453
2454
2455 sub command310 {
2456 print " In loosely managed environments, you may want to allow users
2457 to edit their full name and email address. In strictly managed
2458 environments, you may want to force users to use the name
2459 and email address assigned to them.
2460
2461 'y' - allow a user to edit their full name and email address,
2462 'n' - users must use the assigned values.
2463
2464 ";
2465
2466 if ( lc($edit_identity) eq 'true' ) {
2467 $default_value = "y";
2468 } else {
2469 $default_value = "n";
2470 }
2471 print "Allow editing of user's identity? (y/n) [$WHT$default_value$NRM]: $WHT";
2472 $new_edit = <STDIN>;
2473 if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2474 $edit_identity = 'true';
2475 $edit_name = 'true';
2476 $hide_auth_header = command311b();
2477 } else {
2478 $edit_identity = 'false';
2479 $edit_name = command311();
2480 $hide_auth_header = command311b();
2481 }
2482 return $edit_identity;
2483 }
2484
2485 sub command311 {
2486 print " Given that users are not allowed to modify their
2487 email address, can they edit their full name?
2488
2489 ";
2490
2491 if ( lc($edit_name) eq 'true' ) {
2492 $default_value = "y";
2493 } else {
2494 $default_value = "n";
2495 }
2496 print "Allow the user to edit their full name? (y/n) [$WHT$default_value$NRM]: $WHT";
2497 $new_edit = <STDIN>;
2498 if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2499 $edit_name = 'true';
2500 } else {
2501 $edit_name = 'false';
2502 }
2503 return $edit_name;
2504 }
2505
2506 sub command311b {
2507 print " SquirrelMail adds username information to every sent email
2508 in order to prevent possible sender forging when users are allowed
2509 to change their email and/or full name.
2510
2511 You can remove user information from this header (y), if you think that
2512 it violates privacy or security.
2513
2514 Note: If users are allowed to change their email addresses,
2515 this setting will make it difficult to determine who sent what where.
2516 Use at your own risk.
2517
2518 ";
2519
2520 if ( lc($hide_auth_header) eq "true" ) {
2521 $default_value = "y";
2522 } else {
2523 $default_value = "n";
2524 }
2525 print "Remove username from email headers? (y/n) [$WHT$default_value$NRM]: $WHT";
2526 $new_header = <STDIN>;
2527 if ( ( $new_header =~ /^y\n/i ) || ( ( $new_header =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2528 $hide_auth_header = "true";
2529 } else {
2530 $hide_auth_header = "false";
2531 }
2532 return $hide_auth_header;
2533 }
2534
2535 sub command312 {
2536 print "This option allows you to disable server side thread sorting if your server \n";
2537 print "declares THREAD support, but you don't want to provide threading options \n";
2538 print "to end users or THREAD extension is broken or extension does not work with \n";
2539 print "options used by SquirrelMail. Option is not used, if THREAD extension is \n";
2540 print "not declared in IMAP CAPABILITY.\n";
2541 print "\n";
2542
2543 if ( lc($disable_thread_sort) eq 'true' ) {
2544 $default_value = "y";
2545 } else {
2546 $default_value = "n";
2547 }
2548 print "Disable server side thread sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
2549 $disable_thread_sort = <STDIN>;
2550 if ( ( $disable_thread_sort =~ /^y\n/i ) || ( ( $disable_thread_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2551 $disable_thread_sort = 'true';
2552 } else {
2553 $disable_thread_sort = 'false';
2554 }
2555 return $disable_thread_sort;
2556 }
2557
2558 sub command313 {
2559 print "This option allows you to disable server side sorting if your server declares \n";
2560 print "SORT support, but SORT extension is broken or does not work with options \n";
2561 print "used by SquirrelMail. Option is not used, if SORT extension is not declared \n";
2562 print "in IMAP CAPABILITY.\n";
2563 print "\n";
2564 print "It is strongly recommended to keep server side sorting enabled, if your ";
2565 print "IMAP server supports it.";
2566 print "\n";
2567
2568 if ( lc($disable_server_sort) eq 'true' ) {
2569 $default_value = "y";
2570 } else {
2571 $default_value = "n";
2572 }
2573 print "Disable server-side sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
2574 $disable_server_sort = <STDIN>;
2575 if ( ( $disable_server_sort =~ /^y\n/i ) || ( ( $disable_server_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2576 $disable_server_sort = 'true';
2577 } else {
2578 $disable_server_sort = 'false';
2579 }
2580 return $disable_server_sort;
2581 }
2582
2583 sub command314 {
2584 print "This option allows you to choose if SM uses charset search\n";
2585 print "Your IMAP server must support the SEARCH CHARSET command for this to work\n";
2586 print "\n";
2587
2588 if ( lc($allow_charset_search) eq 'true' ) {
2589 $default_value = "y";
2590 } else {
2591 $default_value = "n";
2592 }
2593 print "Allow charset searching? (y/n) [$WHT$default_value$NRM]: $WHT";
2594 $allow_charset_search = <STDIN>;
2595 if ( ( $allow_charset_search =~ /^y\n/i ) || ( ( $allow_charset_search =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2596 $allow_charset_search = 'true';
2597 } else {
2598 $allow_charset_search = 'false';
2599 }
2600 return $allow_charset_search;
2601 }
2602
2603 # command315 (UID support) obsoleted.
2604
2605 # advanced search option
2606 sub command316 {
2607 print "This option allows you to control the use of advanced search form.\n";
2608 print " 0 = enable basic search only\n";
2609 print " 1 = enable advanced search only\n";
2610 print " 2 = enable both\n";
2611 print "\n";
2612
2613 print "Allowed search (0,1,2)? [$WHT$allow_advanced_search$NRM]: $WHT";
2614 $new_allow_advanced_search = <STDIN>;
2615 if ( $new_allow_advanced_search =~ /^[012]\n/i ) {
2616 $allow_advanced_search = $new_allow_advanced_search;
2617 }
2618 $allow_advanced_search =~ s/[\r\n]//g;
2619 return $allow_advanced_search;
2620 }
2621
2622
2623 sub command317 {
2624 print "This option allows you to change the name of the PHP session used\n";
2625 print "by SquirrelMail. Unless you know what you are doing, you probably\n";
2626 print "don't need or want to change this from the default of SQMSESSID.\n";
2627 print "[$WHT$session_name$NRM]: $WHT";
2628 $new_session_name = <STDIN>;
2629 chomp($new_session_name);
2630 if ( $new_session_name eq "" ) {
2631 $new_session_name = $session_name;
2632 }
2633 return $new_session_name;
2634 }
2635
2636 # time zone config (since 1.5.1)
2637 sub command318 {
2638 print "This option allows you to control the use of time zones.\n";
2639 print " 0 = (default) standard, GNU C time zone names\n";
2640 print " 1 = strict, generic time zone codes with offsets\n";
2641 print " 2 = custom, GNU C time zones loaded from config/timezones.php\n";
2642 print " 3 = custom strict, generic time zone codes with offsets loaded \n";
2643 print " from config/timezones.php\n";
2644 print "See SquirrelMail documentation about format of config/timezones.php file.\n";
2645 print "\n";
2646
2647 print "Desired time zone configuration (0,1,2,3)? [$WHT$time_zone_type$NRM]: $WHT";
2648 $new_time_zone_type = <STDIN>;
2649 if ( $new_time_zone_type =~ /^[0123]\n/i ) {
2650 $time_zone_type = $new_time_zone_type;
2651 } else {
2652 print "\nInvalid configuration value.\n";
2653 print "\nPress enter to continue...";
2654 $tmp = <STDIN>;
2655 }
2656 $time_zone_type =~ s/[\r\n]//g;
2657 return $time_zone_type;
2658 }
2659
2660 # set the location base for redirects (since 1.5.2)
2661 sub command_config_location_base {
2662 print "Here you can set the base part of the SquirrelMail URL.\n";
2663 print "It is normally autodetected but if that fails, use this\n";
2664 print "option to override.\n";
2665 print "It should contain only the protocol and hostname/port parts\n";
2666 print "of the URL; the full path will be appended automatically.\n\n";
2667 print "Examples:\nhttp://webmail.example.org\nhttp://webmail.example.com:8080\nhttps://webmail.example.com:6691\n\n";
2668 print "Do not add any path elements.\n";
2669
2670 print "URL base? [" .$WHT."autodetect$NRM]: $WHT";
2671 $new_config_location_base = <STDIN>;
2672 chomp($new_config_location_base);
2673 $config_location_base = $new_config_location_base;
2674
2675 return $config_location_base;
2676 }
2677
2678 # only_secure_cookies (since 1.5.2)
2679 sub command319 {
2680 print "This option allows you to specify that if a user session is initiated\n";
2681 print "under a secure (HTTPS, SSL-encrypted) connection, the cookies given to\n";
2682 print "the browser will ONLY be transmitted via a secure connection henceforth.\n\n";
2683 print "Generally this is a Good Thing, and should NOT be disabled. However,\n";
2684 print "if you intend to use the Secure Login or Show SSL Link plugins to\n";
2685 print "encrypt the user login, but not the rest of the SquirrelMail session,\n";
2686 print "this can be turned off. Think twice before doing so.\n";
2687 print "\n";
2688
2689 if ( lc($only_secure_cookies) eq 'true' ) {
2690 $default_value = "y";
2691 } else {
2692 $default_value = "n";
2693 }
2694 print "Transmit cookies only on secure connection when available? (y/n) [$WHT$default_value$NRM]: $WHT";
2695 $only_secure_cookies = <STDIN>;
2696 if ( ( $only_secure_cookies =~ /^y\n/i ) || ( ( $only_secure_cookies =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
2697 $only_secure_cookies = 'true';
2698 } else {
2699 $only_secure_cookies = 'false';
2700 }
2701 return $only_secure_cookies;
2702 }
2703
2704
2705 sub command_userThemes {
2706 print "\nDefine the user themes that you wish to use. If you have added\n";
2707 print "a theme of your own, just follow the instructions (?) about\n";
2708 print "how to add them. You can also change the default theme.\n\n";
2709
2710 print "Available user themes:\n";
2711 $count = 0;
2712 while ( $count <= $#user_theme_name ) {
2713 if ( $count == $user_theme_default ) {
2714 print " *";
2715 } else {
2716 print " ";
2717 }
2718 if ( $count < 10 ) {
2719 print " ";
2720 }
2721 $name = $user_theme_name[$count];
2722 $num_spaces = 35 - length($name);
2723 for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
2724 $name = $name . " ";
2725 }
2726
2727 print " $count. $name";
2728 print "($user_theme_path[$count])\n";
2729
2730 $count++;
2731 }
2732
2733 print "\n";
2734 print ".------------------------------------.\n";
2735 print "| t (detect user themes) |\n";
2736 print "| + (add user theme) |\n";
2737 print "| - N (remove user theme) |\n";
2738 print "| m N (mark default user theme) |\n";
2739 print "| l (list user themes) |\n";
2740 print "| d (done) |\n";
2741 print "`------------------------------------'\n";
2742
2743 print "\n[user_themes] command (?=help) > ";
2744 $input = <STDIN>;
2745 $input =~ s/[\r\n]//g;
2746 while ( $input ne "d" ) {
2747 if ( $input =~ /^\s*l\s*/i ) {
2748 $count = 0;
2749 while ( $count <= $#user_theme_name ) {
2750 if ( $count == $user_theme_default ) {
2751 print " *";
2752 } else {
2753 print " ";
2754 }
2755 if ( $count < 10 ) {
2756 print " ";
2757 }
2758 $name = $user_theme_name[$count];
2759 $num_spaces = 35 - length($name);
2760 for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
2761 $name = $name . " ";
2762 }
2763
2764 print " $count. $name";
2765 print "($user_theme_path[$count])\n";
2766
2767 $count++;
2768 }
2769 } elsif ( $input =~ /^\s*m\s*[0-9]+/i ) {
2770 $old_def = $user_theme_default;
2771 $user_theme_default = $input;
2772 $user_theme_default =~ s/^\s*m\s*//;
2773 if ( ( $user_theme_default > $#user_theme_name ) || ( $user_theme_default < 0 ) ) {
2774 print "Cannot set default theme to $user_theme_default. That theme does not exist.\n";
2775 $user_theme_default = $old_def;
2776 }
2777 } elsif ( $input =~ /^\s*\+/ ) {
2778 print "What is the name of this theme? ";
2779 $name = <STDIN>;
2780 $name =~ s/[\r\n]//g;
2781 $user_theme_name[ $#user_theme_name + 1 ] = $name;
2782 print "Be sure to put ../css/ before the filename.\n";
2783 print "What file is this stored in (ex: ../css/my_theme/): ";
2784 $name = <STDIN>;
2785 $name =~ s/[\r\n]//g;
2786 $user_theme_path[ $#user_theme_path + 1 ] = $name;
2787 } elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
2788 if ( $input =~ /[0-9]+\s*$/ ) {
2789 $rem_num = $input;
2790 $rem_num =~ s/^\s*-\s*//g;
2791 $rem_num =~ s/\s*$//;
2792 } else {
2793 $rem_num = $#user_theme_name;
2794 }
2795 if ( $rem_num == $user_theme_default ) {
2796 print "You cannot remove the default theme!\n";
2797 } else {
2798 $count = 0;
2799 @new_theme_name = ();
2800 @new_theme_path = ();
2801 while ( $count <= $#user_theme_name ) {
2802 if ( $count != $rem_num ) {
2803 @new_theme_name = ( @new_theme_name, $user_theme_name[$count] );
2804 @new_theme_path = ( @new_theme_path, $user_theme_path[$count] );
2805 }
2806 $count++;
2807 }
2808 @user_theme_name = @new_theme_name;
2809 @user_theme_path = @new_theme_path;
2810 if ( $user_theme_default > $rem_num ) {
2811 $user_theme_default--;
2812 }
2813 }
2814 } elsif ( $input =~ /^\s*t\s*/i ) {
2815 print "\nStarting detection...\n\n";
2816
2817 opendir( DIR, "../css" );
2818 @files = sort(readdir(DIR));
2819 $cnt = 0;
2820 while ( $cnt <= $#files ) {
2821 $filename = "../css/" . $files[$cnt] .'/';
2822 if ( $files[$cnt] !~ /^\./ && $filename ne "../css/rtl.css" && -e $filename . "default.css" ) {
2823 $found = 0;
2824 for ( $x = 0 ; $x <= $#user_theme_path ; $x++ ) {
2825 if ( $user_theme_path[$x] eq $filename ) {
2826 $found = 1;