| 1 | # (C) Copyright 2005-2007, Axis Communications AB, LUND, SWEDEN |
| 2 | # Modified by Elphel, Inc., USA |
| 3 | # This file is released under the GPL v2. |
| 4 | |
| 5 | # Uncomment the following line to override the generic hardware address |
| 6 | # (usually the serial number) for this interface only. |
| 7 | # MAC=00:0E:64:00:00:00 |
| 8 | |
| 9 | # Valid boot protocols are "dhcp" and "none" (anything other than "dhcp" works). |
| 10 | BOOTPROTO=none |
| 11 | DHCP_CLIENT="/sbin/udhcpc -i eth0 -H $(hostname)" |
| 12 | |
| 13 | # Valid media types are "auto", "10baseT-HD", "10baseT-FD", "100baseTX-HD", |
| 14 | # "100baseTX-FD" and "" (nothing). |
| 15 | MEDIA=auto |
| 16 | AUTONEG=normal |
| 17 | |
| 18 | # If you are using DHCP the following variables will not be used. |
| 19 | IP=192.168.48.2 |
| 20 | NETMASK=255.255.255.0 |
| 21 | BROADCAST=192.168.48.255 |
| 22 | GATEWAY=192.168.48.1 |
| 23 | |
| 24 | # MDI/MDIX configuration; "mdi" - for MDI (normal) ; "mdix" - for MDIX (cross); 'auto' - automatic switching |
| 25 | # most computers and switches now are 'auto', and having 'auto' on both ends sometimes causes problems. |
| 26 | MDI_MODE=mdi |
| 27 | |