From 07738d610fd70638835db7b12cf158e71a7346e3 Mon Sep 17 00:00:00 2001 From: Phil Pennock Date: Fri, 7 Sep 2018 13:56:27 -0400 Subject: [PATCH] =?utf8?q?Fix=20broken=20doc=20links=20and=20http=E2=86=92?= =?utf8?q?https=20where=20possible?= MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit I got a cookie-cutter email from folks noting the modssl.org doc links were broken and asking us to use their site instead, which was both helpful and a rather heavy page with advertising on it, so not something I want our docs to link to. Fixed the modssl link to point to the correct current Apache docs, since mod_ssl has not been a separate project for … a very long time. Audited every `http:` link in the Spec, replacing with https if available, updating URLs as needed, or trimming deadwood as appropriate. This did edit one license text, but in a way which I believe is reasonable and in the license holder's best interests. * Use comments with a datestamp for any remaining http: URLs, showing when they were last audited * Suggest migrating away from Berkeley DB. * Drop mention of a patched `pam_unix` module which is no longer available. * In revamping the CDB tools links, add my own tools. * Redo the intro text for the mod_ssl stuff (first person voice of PH). * Rescorla's book's online examples appear to be gone; drop mention of them and point to Ristić's more recent book too. * Point to wikipedia list of DNSxL services as an overview, in part because I dropped the reference to the defunct rfc-ignorant.org and there was no good candidate as an exemplar for domain-based lists. * Note that mksd is a candidate for removal from Exim since mks_vir is dead. * Drop LogReport/lire reference (dead/gone and can't find it). * Redo proxy protocol spec-linking text. * Replace FAQ A1701 with text saying "don't do that" (self-signed certs) and just telling people to use a CA instead, pointing strongly to Let's Encrypt. We did nobody any favors with that old text still being present today (it was entirely appropriate when written). --- doc/doc-docbook/spec.xfpt | 154 +++++++++++++++++++++----------------- doc/doc-src/FAQ.src | 82 ++------------------ 2 files changed, 94 insertions(+), 142 deletions(-) diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt index 9ab06eddc..b207c2f75 100644 --- a/doc/doc-docbook/spec.xfpt +++ b/doc/doc-docbook/spec.xfpt @@ -392,7 +392,7 @@ very wide interest. An &"easier"& discussion of Exim which provides more in-depth explanatory, introductory, and tutorial material can be found in a book entitled &'The Exim SMTP Mail Server'& (second edition, 2007), published by UIT Cambridge -(&url(http://www.uit.co.uk/exim-book/)). +(&url(https://www.uit.co.uk/exim-book/)). This book also contains a chapter that gives a general introduction to SMTP and Internet mail. Inevitably, however, the book is unlikely to be fully up-to-date @@ -456,7 +456,7 @@ website, are hosted at the University of Cambridge. .cindex "FAQ" As well as Exim distribution tar files, the Exim web site contains a number of differently formatted versions of the documentation. A recent addition to the -online information is the Exim wiki (&url(http://wiki.exim.org)), +online information is the Exim wiki (&url(https://wiki.exim.org)), which contains what used to be a separate FAQ, as well as various other examples, tips, and know-how that have been contributed by Exim users. The wiki site should always redirect to the correct place, which is currently @@ -487,7 +487,7 @@ If you are using a Debian distribution of Exim, you may wish to subscribe to the Debian-specific mailing list &'pkg-exim4-users@lists.alioth.debian.org'& via this web page: .display -&url(http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users) +&url(https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/pkg-exim4-users) .endd Please ask Debian-specific questions on this list and not on the general Exim lists. @@ -509,14 +509,14 @@ message to the &'exim-dev'& mailing list and have it discussed. .cindex "distribution" "https site" The master distribution site for the Exim distribution is .display -&*https://downloads.exim.org/*& +.url(https://downloads.exim.org/) .endd The service is available over HTTPS, HTTP and FTP. We encourage people to migrate to HTTPS. -The content served at &'https://downloads.exim.org/'& is identical to the -content served at &'https://ftp.exim.org/pub/exim'& and -&'ftp://ftp.exim.org/pub/exim'&. +The content served at &url(https://downloads.exim.org/) is identical to the +content served at &url(https://ftp.exim.org/pub/exim) and +&url(ftp://ftp.exim.org/pub/exim). If accessing via a hostname containing &'ftp'&, then the file references that follow are relative to the &_exim_& directories at these sites. @@ -771,7 +771,7 @@ Foundation; either version 2 of the License, or (at your option) any later version. This code implements Dan Bernstein's Constant DataBase (cdb) spec. Information, the spec and sample code for cdb can be obtained from -&url(http://www.pobox.com/~djb/cdb.html). This implementation borrows +&url(https://cr.yp.to/cdb.html). This implementation borrows some code from Dan Bernstein's implementation (which has no license restrictions applied to it). .endblockquote @@ -825,7 +825,7 @@ Redistributions of any form whatsoever must retain the following acknowledgment: &"This product includes software developed by Computing Services -at Carnegie Mellon University (&url(http://www.cmu.edu/computing/)."& +at Carnegie Mellon University (&url(https://www.cmu.edu/computing/)."& CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY @@ -1696,7 +1696,7 @@ or set PCRE_CONFIG=yes to use the installed &(pcre-config)& command. If your operating system has no PCRE support then you will need to obtain and build the current PCRE from &url(ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/). -More information on PCRE is available at &url(http://www.pcre.org/). +More information on PCRE is available at &url(https://www.pcre.org/). .section "DBM libraries" "SECTdb" .cindex "DBM libraries" "discussion of" @@ -1749,14 +1749,18 @@ the traditional &'ndbm'& interface. .next To complicate things further, there are several very different versions of the Berkeley DB package. Version 1.85 was stable for a very long time, releases -2.&'x'& and 3.&'x'& were current for a while, but the latest versions are now -numbered 4.&'x'&. Maintenance of some of the earlier releases has ceased. All -versions of Berkeley DB can be obtained from -&url(http://www.sleepycat.com/). +2.&'x'& and 3.&'x'& were current for a while, but the latest versions when Exim last revamped support were numbered 4.&'x'&. +Maintenance of some of the earlier releases has ceased. All versions of +Berkeley DB could be obtained from +&url(http://www.sleepycat.com/), which is now a redirect to their new owner's +page with far newer versions listed. +It is probably wise to plan to move your storage configurations away from +Berkeley DB format, as today there are smaller and simpler alternatives more +suited to Exim's usage model. .next .cindex "&'tdb'& DBM library" Yet another DBM library, called &'tdb'&, is available from -&url(http://download.sourceforge.net/tdb). It has its own interface, and also +&url(https://sourceforge.net/projects/tdb/files/). It has its own interface, and also operates on a single file. .endlist @@ -1869,7 +1873,7 @@ supports the &[iconv()]& function. However, some of the operating systems that supply &[iconv()]& do not support very many conversions. The GNU &%libiconv%& library (available from -&url(http://www.gnu.org/software/libiconv/)) can be installed on such +&url(https://www.gnu.org/software/libiconv/)) can be installed on such systems to remedy this deficiency, as well as on systems that do not supply &[iconv()]& at all. After installing &%libiconv%&, you should add .code @@ -2957,7 +2961,7 @@ acceptable or not. See section &<>&. Features such as authentication and encryption, where the client input is not plain text, cannot easily be tested with &%-bh%&. Instead, you should use a specialized SMTP test program such as -&url(http://jetmore.org/john/code/#swaks,swaks). +&url(https://www.jetmore.org/john/code/swaks/,swaks). .vitem &%-bhc%&&~<&'IP&~address'&> .oindex "&%-bhc%&" @@ -6335,6 +6339,9 @@ online Perl manpages, in many Perl reference books, and also in Jeffrey Friedl's &'Mastering Regular Expressions'&, which is published by O'Reilly (see &url(http://www.oreilly.com/catalog/regex2/)). +. --- the http: URL here redirects to another page with the ISBN in the URL +. --- where trying to use https: just redirects back to http:, so sticking +. --- to the old URL for now. 2018-09-07. The documentation for the syntax and semantics of the regular expressions that are supported by PCRE is included in the PCRE distribution, and no further @@ -6501,13 +6508,15 @@ The following single-key lookup types are implemented: string without a terminating binary zero. The cdb format is designed for indexed files that are read frequently and never updated, except by total re-creation. As such, it is particularly suitable for large files containing -aliases or other indexed data referenced by an MTA. Information about cdb can -be found in several places: +aliases or other indexed data referenced by an MTA. Information about cdb and +tools for building the files can be found in several places: .display -&url(http://www.pobox.com/~djb/cdb.html) -&url(ftp://ftp.corpit.ru/pub/tinycdb/) -&url(http://packages.debian.org/stable/utils/freecdb.html) +&url(https://cr.yp.to/cdb.html) +&url(http://www.corpit.ru/mjt/tinycdb.html) +&url(https://packages.debian.org/stable/utils/freecdb) +&url(https://github.com/philpennock/cdbtools) (in Go) .endd +. --- 2018-09-07: corpit.ru http:-only A cdb distribution is not needed in order to build Exim with cdb support, because the code for reading cdb files is included directly in Exim itself. However, no means of building or testing cdb files is provided with Exim, so @@ -6788,6 +6797,7 @@ not likely to be useful in normal operation. .next .cindex "whoson lookup type" .cindex "lookup" "whoson" +. --- still http:-only, 2018-09-07 &(whoson)&: &'Whoson'& (&url(http://whoson.sourceforge.net)) is a protocol that allows a server to check whether a particular (dynamically allocated) IP address is currently allocated to a known (trusted) user and, optionally, to @@ -11371,7 +11381,7 @@ matched using &%match_ip%&. .cindex "expansion" "PAM authentication test" .cindex "&%pam%& expansion condition" &'Pluggable Authentication Modules'& -(&url(http://www.kernel.org/pub/linux/libs/pam/)) are a facility that is +(&url(https://mirrors.edge.kernel.org/pub/linux/libs/pam/)) are a facility that is available in the latest releases of Solaris and in some GNU/Linux distributions. The Exim support, which is intended for use in conjunction with the SMTP AUTH command, is available only if Exim is compiled with @@ -11404,11 +11414,7 @@ server_condition = ${if pam{$auth2:${sg{$auth3}{:}{::}}}} In some operating systems, PAM authentication can be done only from a process running as root. Since Exim is running as the Exim user when receiving messages, this means that PAM cannot be used directly in those systems. -A patched version of the &'pam_unix'& module that comes with the -Linux PAM package is available from &url(http://www.e-admin.de/pam_exim/). -The patched module allows one special uid/gid combination, in addition to root, -to authenticate. If you build the patched module to allow the Exim user and -group, PAM can then be used from an Exim authenticator. +. --- 2018-09-07: the pam_exim modified variant has gone, removed claims re using Exim via that .vitem &*pwcheck&~{*&<&'string1'&>&*:*&<&'string2'&>&*}*& @@ -14197,7 +14203,7 @@ feel that in today's Internet, this causes more problems than it solves. It now defaults to true. A more detailed analysis of the issues is provided by Dan Bernstein: .display -&url(http://cr.yp.to/smtp/8bitmime.html) +&url(https://cr.yp.to/smtp/8bitmime.html) .endd To log received 8BITMIME status use @@ -15178,7 +15184,7 @@ This option will let GnuTLS (2.12.0 or later) autoload PKCS11 modules with the p11-kit configuration files in &_/etc/pkcs11/modules/_&. See -&url(http://www.gnutls.org/manual/gnutls.html#Smart-cards-and-HSMs) +&url(https://www.gnutls.org/manual/gnutls.html#Smart-cards-and-HSMs) for documentation. @@ -26733,8 +26739,8 @@ fixed_cram: .scindex IIDcyrauth2 "authenticators" "&(cyrus_sasl)&" .cindex "Cyrus" "SASL library" .cindex "Kerberos" -The code for this authenticator was provided by Matthew Byng-Maddick of A L -Digital Ltd (&url(http://www.aldigital.co.uk)). +The code for this authenticator was provided by Matthew Byng-Maddick while +at A L Digital Ltd. The &(cyrus_sasl)& authenticator provides server support for the Cyrus SASL library implementation of the RFC 2222 (&"Simple Authentication and Security @@ -27098,7 +27104,7 @@ The &(spa)& authenticator provides client support for Microsoft's &'Secure Password Authentication'& mechanism, which is also sometimes known as NTLM (NT LanMan). The code for client side of this authenticator was contributed by Marc Prud'hommeaux, and much of it is -taken from the Samba project (&url(http://www.samba.org)). The code for the +taken from the Samba project (&url(https://www.samba.org/)). The code for the server side was subsequently contributed by Tom Kistner. The mechanism works as follows: @@ -27604,11 +27610,11 @@ aware of future feature enhancements of GnuTLS. Documentation of the strings accepted may be found in the GnuTLS manual, under "Priority strings". This is online as -&url(http://www.gnutls.org/manual/html_node/Priority-Strings.html), +&url(https://www.gnutls.org/manual/html_node/Priority-Strings.html), but beware that this relates to GnuTLS 3, which may be newer than the version installed on your system. If you are using GnuTLS 3, then the example code -&url(http://www.gnutls.org/manual/gnutls.html#Listing-the-ciphersuites-in-a-priority-string) +&url(https://www.gnutls.org/manual/gnutls.html#Listing-the-ciphersuites-in-a-priority-string) on that site can be used to test a given string. For example: @@ -28104,22 +28110,29 @@ connections to new processes if TLS has been used. .section "Certificates and all that" "SECTcerandall" .cindex "certificate" "references to discussion" In order to understand fully how TLS works, you need to know about -certificates, certificate signing, and certificate authorities. This is not the -place to give a tutorial, especially as I do not know very much about it -myself. Some helpful introduction can be found in the FAQ for the SSL addition -to Apache, currently at +certificates, certificate signing, and certificate authorities. +This is a large topic and an introductory guide is unsuitable for the Exim +reference manual, so instead we provide pointers to existing documentation. + +The Apache web-server was for a long time the canonical guide, so their +documentation is a good place to start; their SSL module's Introduction +document is currently at .display -&url(http://www.modssl.org/docs/2.7/ssl_faq.html#ToC24) +.url(https://httpd.apache.org/docs/current/ssl/ssl_intro.html) .endd -Other parts of the &'modssl'& documentation are also helpful, and have -links to further files. -Eric Rescorla's book, &'SSL and TLS'&, published by Addison-Wesley (ISBN -0-201-61598-3), contains both introductory and more in-depth descriptions. -Some sample programs taken from the book are available from +and their FAQ is at .display -&url(http://www.rtfm.com/openssl-examples/) +&url(https://httpd.apache.org/docs/current/ssl/ssl_faq.html) .endd +Eric Rescorla's book, &'SSL and TLS'&, published by Addison-Wesley (ISBN +0-201-61598-3) in 2001, contains both introductory and more in-depth +descriptions. +More recently Ivan Ristić's book &'Bulletproof SSL and TLS'&, +published by Feisty Duck (ISBN 978-1907117046) in 2013 is good. +Ivan is the author of the popular TLS testing tools at +&url(https://www.ssllabs.com/). + .section "Certificate chains" "SECID186" The file named by &%tls_certificate%& may contain more than one @@ -28190,7 +28203,7 @@ signed with that self-signed certificate. For information on creating self-signed CA certificates and using them to sign user certificates, see the &'General implementation overview'& chapter of the Open-source PKI book, available online at -&url(http://ospkibook.sourceforge.net/). +&url(https://sourceforge.net/projects/ospkibook/). .ecindex IIDencsmtp1 .ecindex IIDencsmtp2 @@ -30546,6 +30559,10 @@ connection (assuming long-enough TTL). Exim does not share information between multiple incoming connections (but your local name server cache should be active). +There are a number of DNS lists to choose from, some commercial, some free, +or free for small deployments. An overview can be found at +&url(https://en.wikipedia.org/wiki/Comparison_of_DNS_blacklists). + .section "Specifying the IP address for a DNS list lookup" "SECID201" @@ -30567,8 +30584,7 @@ MX hosts or nameservers of an email sender address. For an example, see section .section "DNS lists keyed on domain names" "SECID202" .cindex "DNS list" "keyed by domain name" There are some lists that are keyed on domain names rather than inverted IP -addresses (see for example the &'domain based zones'& link at -&url(http://www.rfc-ignorant.org/)). No reversing of components is used +addresses. No reversing of components is used with these lists. You can change the name that is looked up in a DNS list by listing it after the domain name, introduced by a slash. For example, .code @@ -32084,7 +32100,7 @@ written. The usual &`defer_ok`& option is available. .vitem &%aveserver%& .cindex "virus scanners" "Kaspersky" This is the scanner daemon of Kaspersky Version 5. You can get a trial version -at &url(http://www.kaspersky.com). This scanner type takes one option, +at &url(https://www.kaspersky.com/). This scanner type takes one option, which is the path to the daemon's UNIX socket. The default is shown in this example: .code @@ -32095,7 +32111,7 @@ av_scanner = aveserver:/var/run/aveserver .vitem &%clamd%& .cindex "virus scanners" "clamd" This daemon-type scanner is GPL and free. You can get it at -&url(http://www.clamav.net/). Some older versions of clamd do not seem to +&url(https://www.clamav.net/). Some older versions of clamd do not seem to unpack MIME containers, so it used to be recommended to unpack MIME attachments in the MIME ACL. This is no longer believed to be necessary. @@ -32189,7 +32205,7 @@ av_scanner = cmdline:\ .endd .vitem &%drweb%& .cindex "virus scanners" "DrWeb" -The DrWeb daemon scanner (&url(http://www.sald.com/)) interface +The DrWeb daemon scanner (&url(https://www.sald.ru/)) interface takes one option, either a full path to a UNIX socket, or host and port specifiers separated by white space. @@ -32226,7 +32242,7 @@ If you omit the argument, the default values show above are used. .vitem &%fsecure%& .cindex "virus scanners" "F-Secure" -The F-Secure daemon scanner (&url(http://www.f-secure.com)) takes one +The F-Secure daemon scanner (&url(https://www.f-secure.com/)) takes one argument which is the path to a UNIX socket. For example: .code av_scanner = fsecure:/path/to/.fsav @@ -32247,9 +32263,13 @@ The default path is &_/var/run/AvpCtl_&. .vitem &%mksd%& .cindex "virus scanners" "mksd" -This is a daemon type scanner that is aimed mainly at Polish users, though some -parts of documentation are now available in English. You can get it at -&url(http://linux.mks.com.pl/). The only option for this scanner type is +This was a daemon type scanner that is aimed mainly at Polish users, +though some documentation was available in English. +The history can be shown at &url(https://en.wikipedia.org/wiki/Mks_vir) +and this appears to be a candidate for removal from Exim, unless +we are informed of other virus scanners which use the same protocol +to integrate. +The only option for this scanner type is the maximum number of processes used simultaneously to scan the attachments, provided that mksd has been run with at least the same number of child processes. For example: @@ -32281,7 +32301,7 @@ specify an empty element to get this. .vitem &%sophie%& .cindex "virus scanners" "Sophos and Sophie" Sophie is a daemon that uses Sophos' &%libsavi%& library to scan for viruses. -You can get Sophie at &url(http://www.clanfield.info/sophie/). The only option +You can get Sophie at &url(http://sophie.sourceforge.net/). The only option for this scanner type is the path to the UNIX socket that Sophie uses for client communication. For example: .code @@ -32385,7 +32405,7 @@ Support is also provided for Rspamd. For more information about installation and configuration of SpamAssassin or Rspamd refer to their respective websites at -&url(http://spamassassin.apache.org) and &url(http://www.rspamd.com) +&url(https://spamassassin.apache.org/) and &url(https://www.rspamd.com/) SpamAssassin can be installed with CPAN by running: .code @@ -35574,7 +35594,7 @@ the address, giving a suitable error message. .cindex "VERP" .cindex "Variable Envelope Return Paths" .cindex "envelope sender" -Variable Envelope Return Paths &-- see &url(http://cr.yp.to/proto/verp.txt) &-- +Variable Envelope Return Paths &-- see &url(https://cr.yp.to/proto/verp.txt) &-- are a way of helping mailing list administrators discover which subscription address is the cause of a particular delivery failure. The idea is to encode the original recipient address in the outgoing envelope sender address, so that @@ -37152,7 +37172,7 @@ the next chapter. The utilities described here are: Another utility that might be of use to sites with many MTAs is Tom Kistner's &'exilog'&. It provides log visualizations across multiple Exim servers. See -&url(http://duncanthrax.net/exilog/) for details. +&url(https://duncanthrax.net/exilog/) for details. @@ -37420,8 +37440,8 @@ assuming you have used the name &"exim"& for the Exim user. You can run .cindex "&'eximstats'&" A Perl script called &'eximstats'& is provided for extracting statistical information from log files. The output is either plain text, or HTML. -Exim log files are also supported by the &'Lire'& system produced by the -LogReport Foundation &url(http://www.logreport.org). +. --- 2018-09-07: LogReport's Lire appears to be dead; website is a Yahoo Japan +. --- 404 error and everything else points to that. The &'eximstats'& script has been hacked about quite a bit over time. The latest version is the result of some extensive revision by Steve Campbell. A @@ -39541,13 +39561,14 @@ for more information of what they mean. SPF is a mechanism whereby a domain may assert which IP addresses may transmit messages with its domain in the envelope from, documented by RFC 7208. For more information on SPF see &url(http://www.openspf.org). +. --- 2018-09-07: still not https Messages sent by a system not authorised will fail checking of such assertions. This includes retransmissions done by traditional forwarders. SPF verification support is built into Exim if SUPPORT_SPF=yes is set in &_Local/Makefile_&. The support uses the &_libspf2_& library -&url(http://www.libspf2.org/). +&url(https://www.libspf2.org/). There is no Exim involvement in the transmission of messages; publishing certain DNS records is all that is required. @@ -39658,6 +39679,7 @@ SPF, but it is supported by the same framework that enables SPF capability. Refer to &url(http://www.openspf.org/FAQ/Best_guess_record) for a description of what it means. +. --- 2018-09-07: still not https: To access this feature, simply use the spf_guess condition in place of the spf one. For example: @@ -39726,10 +39748,8 @@ that uses &"Proxy Protocol"& to speak to it. To include this support, include &"SUPPORT_PROXY=yes"& in Local/Makefile. -It was built on specifications from: -(&url(http://haproxy.1wt.eu/download/1.5/doc/proxy-protocol.txt)). -That URL was revised in May 2014 to version 2 spec: -(&url(http://git.1wt.eu/web?p=haproxy.git;a=commitdiff;h=afb768340c9d7e50d8e)). +It was built on the HAProxy specification, found at +&url(https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt). The purpose of this facility is so that an application load balancer, such as HAProxy, can sit in front of several Exim servers diff --git a/doc/doc-src/FAQ.src b/doc/doc-src/FAQ.src index 1ff867b62..47b810e5d 100644 --- a/doc/doc-src/FAQ.src +++ b/doc/doc-src/FAQ.src @@ -5740,82 +5740,14 @@ Q1701: I am trying to set up an Exim server that uses a self-signed certificate to enable my clients to use TLS. However, clients other than Exim refuse to accept this certificate. What's wrong? -A1701: It seems that some clients require that the certificate presented by - the server be a user (also called ``leaf'' or ``site'') certificate, and not - a self-signed certificate. In this situation, the self-signed - certificate must be installed on the client as a trusted root - \*certification authority*\ (CA), and the certificate used by the server - must be a user certificate signed with that self-signed certificate. - - For information on creating self-signed CA certificates and using them - to sign user certificates, see the \*General implementation overview*\ - chapter of the Open-source PKI book, available online at - \?http://ospkibook.sourceforge.net/?\. Here is a quick overview. First, - read this message: - - \?http://www.FreeBSD.org/cgi/mid.cgi?id=3C3F3A93.C1ECF9B0%40mindspring.com?\ - - Then, follow the instructions found on these two (consecutive) pages: - - \?http://ospkibook.sourceforge.net/docs/OSPKI-2.4.6/OSPKI/initialisation.htm?\ - \?http://ospkibook.sourceforge.net/docs/OSPKI-2.4.6/OSPKI/keygensign.htm?\ - - Two points on the PKI Book literature: - - (1) It's assumed that it's okay to use a passphrase-protected key to - encrypt the user/site/leaf certificate. If this isn't acceptable, - you seem to be able to strip out the passphrase as follows: - -==> openssl rsa -in user.key -our user.key.new - mv user.key.new - - This should be done immediately after \(user.key)\ is created. - - (2) The \*sign.sh*\ script is available in the \*mod_ssl*\ distribution, - available at \?http://www.modssl.org/source/?\. - - Having followed the instructions, you end up with the following files: - - (a) \(ca.crt)\ - - This file should be installed into the client software as a trusted - root certification authority. In Windows XP, this can be done as follows: - - \#\#Call the file \(ca_cert.cer)\ - [[br]] - \#\#Double-click on the file - [[br]] - \#\#"Install Certificate"; - [[br]] - \#\#"Next" - [[br]] - \#\#"Place all certificates in the following store" - [[br]] - \#\#"Browse..." - [[br]] - \#\#"Trusted Root Certification Authorities" - [[br]] - \#\#"OK" - [[br]] - \#\#"Next" - [[br]] - \#\#"Finish" - [[br]] - \#\#"Yes" - [[br]] - \#\#"OK" - - (b) \(user.crt)\ and \(user.key)\ - - These files should be installed into the server software. In Exim, this - can be done by adding these lines to the configuration file: - -==> tls_certificate = /usr/local/etc/exim/tls_cert - tls_privatekey = /usr/local/etc/exim/tls_key - - Then install \(user.crt)\ and \(user.key)\ under the names \(tls_cert)\ - and \(tls_key)\ in the appropriate directory. +A1701: Don't use a self-signed certificate today. Use a certificate from a + certificate authority, whether your own private certificate authority or + a free CA such as Let's Encrypt. + The exim.org setup uses Let's Encrypt, using the lego tooling and a small + shell wrapper to let the certificates be automatically renewed via cron. + + \?https://github.com/xenolf/lego?\ Q1702: How can I arrange for Exim to advertise support for SMTP authentication only when the session is encrypted? -- 2.25.1