+/* Do the client side of smtp-level authentication */
+/*
+Arguments:
+ buffer EHLO response from server (gets overwritten)
+ addrlist chain of potential addresses to deliver
+ host host to deliver to
+ ob transport options
+ ibp, obp comms channel control blocks
+
+Returns:
+ OK Success, or failed (but not required): global "smtp_authenticated" set
+ DEFER Failed authentication (and was required)
+ ERROR Internal problem
+
+ FAIL_SEND Failed communications - transmit
+ FAIL - response
+*/
+
+int
+smtp_auth(uschar *buffer, unsigned bufsize, address_item *addrlist, host_item *host,
+ smtp_transport_options_block *ob, BOOL is_esmtp,
+ smtp_inblock *ibp, smtp_outblock *obp)
+{
+ int require_auth;
+ uschar *fail_reason = US"server did not advertise AUTH support";
+
+ smtp_authenticated = FALSE;
+ client_authenticator = client_authenticated_id = client_authenticated_sender = NULL;
+ require_auth = verify_check_this_host(&(ob->hosts_require_auth), NULL,
+ host->name, host->address, NULL);
+
+ if (is_esmtp && !regex_AUTH) regex_AUTH =
+ regex_must_compile(US"\\n250[\\s\\-]AUTH\\s+([\\-\\w\\s]+)(?:\\n|$)",
+ FALSE, TRUE);
+
+ if (is_esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1))
+ {
+ uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]);
+ expand_nmax = -1; /* reset */
+
+ /* Must not do this check until after we have saved the result of the
+ regex match above. */
+
+ if (require_auth == OK ||
+ verify_check_this_host(&(ob->hosts_try_auth), NULL, host->name,
+ host->address, NULL) == OK)
+ {
+ auth_instance *au;
+ fail_reason = US"no common mechanisms were found";
+
+ DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n");
+
+ /* Scan the configured authenticators looking for one which is configured
+ for use as a client, which is not suppressed by client_condition, and
+ whose name matches an authentication mechanism supported by the server.
+ If one is found, attempt to authenticate by calling its client function.
+ */
+
+ for (au = auths; !smtp_authenticated && au != NULL; au = au->next)
+ {
+ uschar *p = names;
+ if (!au->client ||
+ (au->client_condition != NULL &&
+ !expand_check_condition(au->client_condition, au->name,
+ US"client authenticator")))
+ {
+ DEBUG(D_transport) debug_printf("skipping %s authenticator: %s\n",
+ au->name,
+ (au->client)? "client_condition is false" :
+ "not configured as a client");
+ continue;
+ }
+
+ /* Loop to scan supported server mechanisms */
+
+ while (*p != 0)
+ {
+ int rc;
+ int len = Ustrlen(au->public_name);
+ while (isspace(*p)) p++;
+
+ if (strncmpic(au->public_name, p, len) != 0 ||
+ (p[len] != 0 && !isspace(p[len])))
+ {
+ while (*p != 0 && !isspace(*p)) p++;
+ continue;
+ }
+
+ /* Found data for a listed mechanism. Call its client entry. Set
+ a flag in the outblock so that data is overwritten after sending so
+ that reflections don't show it. */
+
+ fail_reason = US"authentication attempt(s) failed";
+ obp->authenticating = TRUE;
+ rc = (au->info->clientcode)(au, ibp, obp,
+ ob->command_timeout, buffer, bufsize);
+ obp->authenticating = FALSE;
+ DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n",
+ au->name, rc);
+
+ /* A temporary authentication failure must hold up delivery to
+ this host. After a permanent authentication failure, we carry on
+ to try other authentication methods. If all fail hard, try to
+ deliver the message unauthenticated unless require_auth was set. */
+
+ switch(rc)
+ {
+ case OK:
+ smtp_authenticated = TRUE; /* stops the outer loop */
+ client_authenticator = au->name;
+ if (au->set_client_id != NULL)
+ client_authenticated_id = expand_string(au->set_client_id);
+ break;
+
+ /* Failure after writing a command */
+
+ case FAIL_SEND:
+ return FAIL_SEND;
+
+ /* Failure after reading a response */
+
+ case FAIL:
+ if (errno != 0 || buffer[0] != '5') return FAIL;
+ log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s",
+ au->name, host->name, host->address, buffer);
+ break;
+
+ /* Failure by some other means. In effect, the authenticator
+ decided it wasn't prepared to handle this case. Typically this
+ is the result of "fail" in an expansion string. Do we need to
+ log anything here? Feb 2006: a message is now put in the buffer
+ if logging is required. */
+
+ case CANCELLED:
+ if (*buffer != 0)
+ log_write(0, LOG_MAIN, "%s authenticator cancelled "
+ "authentication H=%s [%s] %s", au->name, host->name,
+ host->address, buffer);
+ break;
+
+ /* Internal problem, message in buffer. */
+
+ case ERROR:
+ set_errno(addrlist, 0, string_copy(buffer), DEFER, FALSE);
+ return ERROR;
+ }
+
+ break; /* If not authenticated, try next authenticator */
+ } /* Loop for scanning supported server mechanisms */
+ } /* Loop for further authenticators */
+ }
+ }
+
+ /* If we haven't authenticated, but are required to, give up. */
+
+ if (require_auth == OK && !smtp_authenticated)
+ {
+ set_errno(addrlist, ERRNO_AUTHFAIL,
+ string_sprintf("authentication required but %s", fail_reason), DEFER,
+ FALSE);
+ return DEFER;
+ }
+
+ return OK;
+}
+
+
+/* Construct AUTH appendix string for MAIL TO */
+/*
+Arguments
+ buffer to build string
+ addrlist chain of potential addresses to deliver
+ ob transport options
+
+Globals smtp_authenticated
+ client_authenticated_sender
+Return True on error, otherwise buffer has (possibly empty) terminated string
+*/
+
+BOOL
+smtp_mail_auth_str(uschar *buffer, unsigned bufsize, address_item *addrlist,
+ smtp_transport_options_block *ob)
+{
+uschar *local_authenticated_sender = authenticated_sender;
+
+#ifdef notdef
+ debug_printf("smtp_mail_auth_str: as<%s> os<%s> SA<%s>\n", authenticated_sender, ob->authenticated_sender, smtp_authenticated?"Y":"N");
+#endif
+
+if (ob->authenticated_sender != NULL)
+ {
+ uschar *new = expand_string(ob->authenticated_sender);
+ if (new == NULL)
+ {
+ if (!expand_string_forcedfail)
+ {
+ uschar *message = string_sprintf("failed to expand "
+ "authenticated_sender: %s", expand_string_message);
+ set_errno(addrlist, 0, message, DEFER, FALSE);
+ return TRUE;
+ }
+ }
+ else if (new[0] != 0) local_authenticated_sender = new;
+ }
+
+/* Add the authenticated sender address if present */
+
+if ((smtp_authenticated || ob->authenticated_sender_force) &&
+ local_authenticated_sender != NULL)
+ {
+ string_format(buffer, bufsize, " AUTH=%s",
+ auth_xtextencode(local_authenticated_sender,
+ Ustrlen(local_authenticated_sender)));
+ client_authenticated_sender = string_copy(local_authenticated_sender);
+ }
+else
+ *buffer= 0;
+
+return FALSE;
+}
+
+
+
/*************************************************
* Deliver address list to given host *
*************************************************/
smtp_outblock outblock;
int max_rcpt = tblock->max_addresses;
uschar *igquotstr = US"";
-uschar *local_authenticated_sender = authenticated_sender;
uschar *helo_data = NULL;
uschar *message = NULL;
uschar new_message_id[MESSAGE_ID_LENGTH + 1];
#endif
)
{
- int require_auth;
- uschar *fail_reason = US"server did not advertise AUTH support";
-
/* Set for IGNOREQUOTA if the response to LHLO specifies support and the
lmtp_ignore_quota option was set. */
the business. The host name and address must be available when the
authenticator's client driver is running. */
- smtp_authenticated = FALSE;
- client_authenticator = client_authenticated_id = client_authenticated_sender = NULL;
- require_auth = verify_check_this_host(&(ob->hosts_require_auth), NULL,
- host->name, host->address, NULL);
-
- if (esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1))
+ switch (yield = smtp_auth(buffer, sizeof(buffer), addrlist, host,
+ ob, esmtp, &inblock, &outblock))
{
- uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]);
- expand_nmax = -1; /* reset */
-
- /* Must not do this check until after we have saved the result of the
- regex match above. */
-
- if (require_auth == OK ||
- verify_check_this_host(&(ob->hosts_try_auth), NULL, host->name,
- host->address, NULL) == OK)
- {
- auth_instance *au;
- fail_reason = US"no common mechanisms were found";
-
- DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n");
-
- /* Scan the configured authenticators looking for one which is configured
- for use as a client, which is not suppressed by client_condition, and
- whose name matches an authentication mechanism supported by the server.
- If one is found, attempt to authenticate by calling its client function.
- */
-
- for (au = auths; !smtp_authenticated && au != NULL; au = au->next)
- {
- uschar *p = names;
- if (!au->client ||
- (au->client_condition != NULL &&
- !expand_check_condition(au->client_condition, au->name,
- US"client authenticator")))
- {
- DEBUG(D_transport) debug_printf("skipping %s authenticator: %s\n",
- au->name,
- (au->client)? "client_condition is false" :
- "not configured as a client");
- continue;
- }
-
- /* Loop to scan supported server mechanisms */
-
- while (*p != 0)
- {
- int rc;
- int len = Ustrlen(au->public_name);
- while (isspace(*p)) p++;
-
- if (strncmpic(au->public_name, p, len) != 0 ||
- (p[len] != 0 && !isspace(p[len])))
- {
- while (*p != 0 && !isspace(*p)) p++;
- continue;
- }
-
- /* Found data for a listed mechanism. Call its client entry. Set
- a flag in the outblock so that data is overwritten after sending so
- that reflections don't show it. */
-
- fail_reason = US"authentication attempt(s) failed";
- outblock.authenticating = TRUE;
- rc = (au->info->clientcode)(au, &inblock, &outblock,
- ob->command_timeout, buffer, sizeof(buffer));
- outblock.authenticating = FALSE;
- DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n",
- au->name, rc);
-
- /* A temporary authentication failure must hold up delivery to
- this host. After a permanent authentication failure, we carry on
- to try other authentication methods. If all fail hard, try to
- deliver the message unauthenticated unless require_auth was set. */
-
- switch(rc)
- {
- case OK:
- smtp_authenticated = TRUE; /* stops the outer loop */
- client_authenticator = au->name;
- if (au->set_client_id != NULL)
- client_authenticated_id = expand_string(au->set_client_id);
- break;
-
- /* Failure after writing a command */
-
- case FAIL_SEND:
- goto SEND_FAILED;
-
- /* Failure after reading a response */
-
- case FAIL:
- if (errno != 0 || buffer[0] != '5') goto RESPONSE_FAILED;
- log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s",
- au->name, host->name, host->address, buffer);
- break;
-
- /* Failure by some other means. In effect, the authenticator
- decided it wasn't prepared to handle this case. Typically this
- is the result of "fail" in an expansion string. Do we need to
- log anything here? Feb 2006: a message is now put in the buffer
- if logging is required. */
-
- case CANCELLED:
- if (*buffer != 0)
- log_write(0, LOG_MAIN, "%s authenticator cancelled "
- "authentication H=%s [%s] %s", au->name, host->name,
- host->address, buffer);
- break;
-
- /* Internal problem, message in buffer. */
-
- case ERROR:
- yield = ERROR;
- set_errno(addrlist, 0, string_copy(buffer), DEFER, FALSE);
- goto SEND_QUIT;
- }
-
- break; /* If not authenticated, try next authenticator */
- } /* Loop for scanning supported server mechanisms */
- } /* Loop for further authenticators */
- }
- }
-
- /* If we haven't authenticated, but are required to, give up. */
-
- if (require_auth == OK && !smtp_authenticated)
- {
- yield = DEFER;
- set_errno(addrlist, ERRNO_AUTHFAIL,
- string_sprintf("authentication required but %s", fail_reason), DEFER,
- FALSE);
- goto SEND_QUIT;
+ default: goto SEND_QUIT;
+ case OK: break;
+ case FAIL_SEND: goto SEND_FAILED;
+ case FAIL: goto RESPONSE_FAILED;
}
}
otherwise no check - this feature is expected to be used with LMTP and other
cases where non-standard addresses (e.g. without domains) might be required. */
-if (ob->authenticated_sender != NULL)
- {
- uschar *new = expand_string(ob->authenticated_sender);
- if (new == NULL)
- {
- if (!expand_string_forcedfail)
- {
- uschar *message = string_sprintf("failed to expand "
- "authenticated_sender: %s", expand_string_message);
- set_errno(addrlist, 0, message, DEFER, FALSE);
- return ERROR;
- }
- }
- else if (new[0] != 0) local_authenticated_sender = new;
- }
-
-/* Add the authenticated sender address if present */
-
-if ((smtp_authenticated || ob->authenticated_sender_force) &&
- local_authenticated_sender != NULL)
- {
- string_format(p, sizeof(buffer) - (p-buffer), " AUTH=%s",
- auth_xtextencode(local_authenticated_sender,
- Ustrlen(local_authenticated_sender)));
- client_authenticated_sender = string_copy(local_authenticated_sender);
- }
+if (smtp_mail_auth_str(p, sizeof(buffer) - (p-buffer), addrlist, ob))
+ return ERROR;
/* From here until we send the DATA command, we can make use of PIPELINING
if the server host supports it. The code has to be able to check the responses
projects / exim.git / commitdiff