X-Git-Url: https://vcs.fsf.org/?p=exim.git;a=blobdiff_plain;f=doc%2Fdoc-txt%2FChangeLog;h=0283defca73614d92d4056af1dcdf3919564678a;hp=cd6c2f0e397ddce912e43bb2178c6875558531b4;hb=dac79d3efbba76b420f6d89cdb1dcd276e2ced00;hpb=59cf854452de4339f1560ca82e927f7fdaa55b7f diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog index cd6c2f0e3..6febd4d85 100644 --- a/doc/doc-txt/ChangeLog +++ b/doc/doc-txt/ChangeLog @@ -1,8 +1,569 @@ -$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.171 2005/06/27 10:21:38 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.295 2006/02/13 16:23:57 ph10 Exp $ Change log file for Exim from version 4.21 ------------------------------------------- +Exim version 4.61 +----------------- + +PH/01 The code for finding all the local interface addresses on a FreeBSD + system running IPv6 was broken. This may well have applied to all BSD + systems, as well as to others that have similar system calls. The broken + code found IPv4 interfaces correctly, but gave incorrect values for the + IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was + that it would not match correctly against @[] and not recognize the IPv6 + addresses as local. + +PH/02 The ipliteral router was not recognizing addresses of the form user@ + [ipv6:....] because it didn't know about the "ipv6:" prefix. + +PH/03 Added disable_ipv6. + +PH/04 Changed $reply_address to use the raw form of the headers instead of the + decoded form, because it is most often used to construct To: headers + lines in autoreplies, and the decoded form may well be syntactically + invalid. However, $reply_address has leading white space removed, and all + newlines turned into spaces so that the autoreply transport does not + grumble. + +PH/05 If group was specified without a user on a router, and no group or user + was specified on a transport, the group from the router was ignored. + +PH/06 Increased the number of ACL variables to 20 of each type, and arranged + for visible compile-time settings that can be used to change these + numbers, for those that want even more. Backwards compatibility with old + spool files has been maintained. However, going back to a previous Exim + release will lost any variables that are in spool files. + +PH/07 Two small changes when running in the test harness: increase delay when + passing a TCP/IP connection to a new process, in case the original + process has to generate a bounce, and remove special handling of + 127.0.0.2 (sic), which is no longer necessary. + +PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to + be the same on different OS. + +PH/09 Moved a debug statement in filter processing to avoid a race problem when + testing. + +JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:" + whether --show-vars was specified or not + +JJ/02 exipick: Added support for new ACL variable spool format introduced + in 4.61-PH/06 + +PH/10 Fixed another bug related to PH/04 above: if an incoming message had a + syntactically invalid From: or Reply-to: line, and a filter used this to + generate an autoreply, and therefore failed to obtain an address for the + autoreply, Exim could try to deliver to a non-existent relative file + name, causing unrelated and misleading errors. What now happens is that + it logs this as a hard delivery error, but does not attempt to create a + bounce message. + +PH/11 The exinext utility has a -C option for testing purposes, but although + the given file was scanned by exinext itself; it wasn't being passed on + when Exim was called. + +PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as + an end-of-file indication when reading a command response. + +PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was + compiled. In many other places in Exim, IPv6 addresses are always + recognized, so I have changed this. It also means that IPv4 domain + literals of the form [IPV4:n.n.n.n] are now always recognized. + +PH/14 When a uid/gid is specified for the queryprogram router, it cannot be + used if the router is not running as root, for example, when verifying at + ACL time, or when using -bh. The debugging output from this situation was + non-existent - all you got was a failure to exec. I have made two + changes: + + (a) Failures to set uid/gid, the current directory, or a process leader + in a subprocess such as that created by queryprogram now generate + suitable debugging ouput when -d is set. + + (b) The queryprogram router detects when it is not running as root, + outputs suitable debugging information if -d is set, and then runs + the subprocess without attempting to change uid/gid. + +PH/15 Minor change to Makefile for building test_host (undocumented testing + feature). + +PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the + additional section of a DNS packet that returns MX or SRV records. + Instead, it always explicitly searches for A/AAAA records. This avoids + major problems that occur when a DNS server includes only records of one + type (A or AAAA) in an MX/SRV packet. A byproduct of this change has + fixed another bug: if SRV records were looked up and the corresponding + address records were *not* found in the additional section, the port + values from the SRV records were lost. + +PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not + using the correct key (the original address) when searching the retry + rules in order to find which one to use for generating the retry hint. + +PH/18 If quota_warn_message contains a From: header, Exim now refrains from + adding the default one. Similarly, if it contains a Reply-To: header, the + errors_reply_to option, if set, is not used. + +PH/19 When calculating a retry time, Exim used to measure the "time since + failure" by looking at the "first failed" field in the retry record. Now + it does not use this if it is later than than the arrival time of the + message. Instead it uses the arrival time. This makes for better + behaviour in cases where some deliveries succeed, thus re-setting the + "first failed" field. An example is a quota failure for a huge message + when small messages continue to be delivered. Without this change, the + "time since failure" will always be short, possible causing more frequent + delivery attempts for the huge message than are intended. + +PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as + $1, $2, $3) because the numerical variables can be reset during some + expansion items (e.g. "match"), thereby losing the authentication data. + +PH/21 Make -bV show the size of off_t variables so that the test suite can + decide whether to run tests for quotas > 2G. + +PH/22 Test the values given for quota, quota_filecount, quota_warn_threshold, + mailbox_size, and mailbox_filecount in the appendfile transport. If a + filecount value is greater than 2G or if a quota value is greater than 2G + on a system where the size of off_t is not greater than 4, a panic error + is given. + +PH/23 When a malformed item such as 1.2.3/24 appears in a host list, it can + never match. The debug and -bh output now contains an explicit error + message indicating a malformed IPv4 address or mask. + +PH/24 An host item such as 1.2.3.4/abc was being treated as the IP address + 1.2.3.4 without a mask. Now it is not recognized as an IP address, and + PH/23 above applies. + +PH/25 Do not write to syslog when running in the test harness. The only + occasion when this arises is a failure to open the main or panic logs + (for which there is an explicit test). + +PH/26 Added the /no_tell option to "control=freeze". + +PH/27 If a host name lookup failed very early in a connection, for example, if + the IP address matched host_lookup and the reverse lookup yielded a name + that did not have a forward lookup, an error message of the form "no IP + address found for host xxx.xxx.xxx (during SMTP connection from NULL)" + could be logged. Now it outputs the IP address instead of "NULL". + + +Exim version 4.60 +----------------- + +PH/01 Two changes to the default runtime configuration: + + (1) Move the checks for relay_from_hosts and authenticated clients from + after to before the (commented out) DNS black list checks. + + (2) Add control=submission to the relay_from_hosts and authenticated + clients checks, on the grounds that messages accepted by these + statements are most likely to be submissions. + +PH/02 Several tidies to the handling of ${prvs and ${prvscheck: + + (1) Generate an error if the third argument for the ${prvs expansion is + not a single digit. + + (2) Treat a missing third argument of ${prvscheck as if it were an empty + string. + + (3) Reset the variables that are obtained from the first argument of + ${prvscheck and used in the second argument before leaving the code, + because their memory is reclaimed, so using them afterwards may do + silly things. + + (4) Tidy up the code for expanding the arguments of ${prvscheck one by + one (it's much easier than Tom thought :-). + + (5) Because of (4), we can now allow for the use of $prvscheck_result + inside the third argument. + +PH/03 For some reason, the default setting of PATH when running a command from + a pipe transport was just "/usr/bin". I have changed it to + "/bin:/usr/bin". + +PH/04 SUPPORT_TRANSLATE_IP_ADDRESS and MOVE_FROZEN_MESSAGES did not cause + anything to be listed in the output from -bV. + +PH/05 When a filter generated an autoreply, the entire To: header line was + quoted in the delivery log line, like this: + + => >A.N.Other ... + + This has been changed so that it extracts the operative address. There + may be more than one such address. If so, they are comma-separated, like + this: + + => >ano@some.domain,ona@other.domain ... + +PH/06 When a client host used a correct literal IP address in a HELO or EHLO + command, (for example, EHLO [1.2.3.4]) and the client's IP address was + not being looked up in the rDNS to get a host name, Exim was showing the + IP address twice in Received: lines, even though the IP addresses were + identical. For example: + + Received: from [1.2.3.4] (helo=[1.2.3.4]) + + However, if the real host name was known, it was omitting the HELO data + if it matched the actual IP address. This has been tidied up so that it + doesn't show the same IP address twice. + +PH/07 When both +timestamp and +memory debugging was on, the value given by + $tod_xxx expansions could be wrong, because the tod_stamp() function was + called by the debug printing, thereby overwriting the timestamp buffer. + Debugging no longer uses the tod_stamp() function when +timestamp is set. + +PH/08 When the original message was included in an autoreply transport, it + always said "this is a copy of the message, including all the headers", + even if body_only or headers_only was set. It now gives an appropriate + message. + +PH/09 Applied a patch from the Sieve maintainer which: + + o fixes some comments + o adds the (disabled) notify extension core + o adds some debug output for the result of if/elsif tests + o points to the current vacation draft in the documentation + and documents the missing references header update + + and most important: + + o fixes a bug in processing the envelope test (when testing + multiple envelope elements, the last element determinted the + result) + +PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to + Electronic Mail") by including: + + Auto-submitted: auto-generated + + in the messages that it generates (bounce messages and others, such as + warnings). In the case of bounce messages for non-SMTP mesages, there was + also a typo: it was using "Auto_submitted" (underscore instead of + hyphen). Since every message generated by Exim is necessarily in response + to another message, thes have all been changed to: + + Auto-Submitted: auto-replied + + in accordance with these statements in the RFC: + + The auto-replied keyword: + + - SHOULD be used on messages sent in direct response to another + message by an automatic process, + + - MUST NOT be used on manually-generated messages, + + - MAY be used on Delivery Status Notifications (DSNs) and Message + Disposition Notifications (MDNs), + + - MUST NOT be used on messages generated by automatic or periodic + processes, except for messages which are automatic responses to + other messages. + +PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}" + to the default Received: header definition. + +PH/12 Added log selector acl_warn_skipped (default on). + +PH/13 After a successful wildlsearch lookup, discard the values of numeric + variables because (a) they are in the wrong storage pool and (b) even if + they were copied, it wouldn't work properly because of the caching. + +PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length + checking when decoding. Apparently there are clients that generate + overlong encoded strings. Why am I not surprised? + +PH/15 If the first argument of "${if match_address" was not empty, but did not + contain an "@" character, Exim crashed. Now it writes a panic log message + and treats the condition as false. + +PH/16 In autoreply, treat an empty string for "once" the same as unset. + +PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve + extension "envelope-auth". The code is finished and in agreement with + other implementations, but there is no documentation so far and in fact, + nobody wrote the draft yet. This extension is currently #undef'ed, thus + not changing the active code. + + Print executed "if" and "elsif" statements when debugging is used. This + helps a great deal to understand what a filter does. + + Document more things not specified clearly in RFC3028. I had all this + sorted out, when out of a sudden new issues came to my mind. Oops." + +PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists + (Bugzilla #53). + +PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated + canonical form (as documented). However, after a host name lookup from + the IP address, check_host() was doing a simple string comparison with + addresses acquired from the DNS when checking that the found name did + have the original IP as one of its addresses. Since any found IPv6 + addresses are likely to be in abbreviated form, the comparison could + fail. Luckily, there already exists a function for doing the comparison + by converting both addresses to binary, so now that is used instead of + the text comparison. + +PH/20 There was another similar case to PH/19, when a complete host name was + given in a host list; looking up its IP address could give an abbreviated + form, whereas the current host's name might or might not be abbreviated. + The same fix has been applied. + + +Exim version 4.54 +----------------- + +PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was + set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not. + It now does. + +PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on + the CVS lines, and there was a missing #if HAVE_IPV6 in host.c. + +PH/03 Typo: missing ".o" in src/pcre/Makefile. + +PH/04 Tighten up "personal" tests: Instead of testing for any "List-" + header line, restrict the check to what is listed in RFCs 2369 and 2929. + Also, for "Auto-Submitted", treat anything other than "no" as + non-personal, in accordance with RFC 3834. (Previously it treated + anything starting "auto-" as non-personal.) + +TF/01 The control=submission/name=... option had a problem with syntax + errors if the name included a slash character. The /name= option + now slurps the rest of the string, so it can include any characters + but it must come last in the list of options (after /sender_retain + or /domain=). + +PH/05 Some modifications to the interface to the fake nameserver for the new + testing suite. + + + +Exim version 4.53 +----------------- + +TK/01 Added the "success_on_redirect" address verification option. See + NewStuff for rationale and an example. + +PH/01 Added support for SQLite, basic code supplied by David Woodhouse. + +PH/02 Patch to exigrep to allow it to work on syslog lines. + +PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of + fread() to skip over the body file's header line, because in Cygwin the + header line is locked and is inaccessible. + +PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both + co-exist for some time) to make it clear that it is the Exim ID that is + referenced, not the Message-ID: header line. + +PH/05 Replaced all Tom's calls to snprintf() with calls to the internal + string_format() function, because snprintf() does not exist on all + operating systems. + +PH/06 The use of forbid_filter_existstest now also locks out the use of the + ${stat: expansion item. + +PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP + protocol synchronization error", to keep the pedants happy. + +PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as + well as for IRIX systems, when gcc is being used. See the host.c source + file for comments. + +PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer. + +PH/10 Named domain lists were not working if used in a queue_smtp_domains + setting. + +PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp + transport and to the smtp transport in LMTP mode. + +TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway). + +PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to + run a filter in a subprocess. This could lead to confusion in subsequent + lookups in the parent process. There should also be a search_tidyup() at + the end of the subprocess. + +PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true + only if the host matched helo_try_verify_hosts, which caused the + verification to occur when the EHLO/HELO command was issued. The ACL just + tested the remembered result. Now, if a previous verification attempt has + not happened, "verify = helo" does it there and then. + +JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04) + +TK/03 Fix log output including CR from clamd. + +PH/14 A reference to $reply_address when Reply-to: was empty and From: did not + exist provoked a memory error which could cause a segfault. + +PH/15 Installed PCRE 6.2 + +PH/17 Defined BIND_8_COMPAT in the Darwin os.h file. + +PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause + of the problem. Specifically, suggested +O2 rather than +O1 for the + HP-UX compiler. + +PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch). + +PH/20 If a delivery was routed to a non-standard port by means of an SRV + record, the port was not correctly logged when the outgoing_port log + selector was set (it logged the transort's default port). + +PH/21 Added support for host-specific ports to manualroute, queryprogram, + fallback_hosts, and "hosts" in the smtp transport. + +PH/22 If the log selector "outgoing_port" is set, the port is now also given on + host errors such as "Connection refused". + +PH/23 Applied a patch to fix problems with exim-4.52 while doing radius + authentication with radiusclient 0.4.9: + + - Error returned from rc_read_config was caught wrongly + - Username/password not passed on to radius server due to wrong length. + + The presumption is that some radiusclient API changes for 4.51/PH/17 + were not taken care of correctly. The code is still untested by me (my + Linux distribution still has 0.3.2 of radiusclient), but it was + contributed by a Radius user. + +PH/24 When doing a callout, the value of $domain wasn't set correctly when + expanding the "port" option of the smtp transport. + +TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met + while reading a MIME header. Thanks to Tom Hughes for a patch. + +PH/24 Include config.h inside local_scan.h so that configuration settings are + available. + +PH/25 Make $smtp_command_argument available after all SMTP commands. This means + that in an ACL for RCPT (for example), you can examine exactly what was + received. + +PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO + commands, but it was not correctly comparing the address with the actual + client host address. Thus, it would show the EHLO address in Received: + header lines when this was not necessary. + +PH/27 Added the % operator to ${eval:}. + +PH/28 Exim tries to create and chdir to its spool directory when it starts; + it should be ignoring failures (because with -C, for example, it has lost + privilege). It wasn't ignoring creation failures other than "already + exists". + +PH/29 Added "crypteq" to the list of supported features that Exim outputs when + -bV or -d is used. + +PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed + because an input line was too long, either on its own, or by virtue of + too many continuations, the temporary file was not being removed, and the + return code was incorrect. + +PH/31 Missing "BOOL" in function definition in filtertest.c. + +PH/32 Applied Sieve patches from the maintainer. + +TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67. + +PH/33 Added "verify = not_blind". + +PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in + Local/Makefile (with some defaults set). These are used in built scripts + such as exicyclog, but they have never been used in the exim_install + script (though there are many overriding facilities there). I have + arranged that the exim_install script now takes note of these two + settings. + +PH/35 Installed configuration files for Dragonfly. + +PH/36 When a locally submitted message by a trusted user did not contain a + From: header, and the sender address was obtained from -f or from an SMTP + MAIL command, and the trusted user did not use -F to supply a sender + name, $originator_name was incorrectly used when constructing a From: + header. Furthermore, $originator_name was used for submission mode + messages from external hosts without From: headers in a similar way, + which is clearly wrong. + +PH/37 Added control=suppress_local_fixups. + +PH/38 When log_selector = +received_sender was set, and the addition of the + sender made the log line's construction buffer exactly full, or one byte + less than full, an overflow happened when the terminating "\n" was + subsequently added. + +PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry + when the result of a list match is failure because a DNS lookup failed. + +PH/40 RM_COMMAND is now used in the building process. + +PH/41 Added a "distclean" target to the top-level Makefile; it deletes all + the "build-* directories that it finds. + +PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP + address in a domain literal was a prefix of an interface address. + +PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains + when verifying a sender address, unless rewrite_headers is false. + +PH/44 Wrote a long comment about why errors_to addresses are verified as + recipients, not senders. + +TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when + the ratelimit ACL was added. + +PH/45 Added $smtp_command for the full command (cf $smtp_command_argument). + +PH/46 Added extra information about PostgreSQL errors to the error string. + +PH/47 Added an interface to a fake DNS resolver for use by the new test suite, + avoiding the need to install special zones in a real server. This is + backwards compatible; if it can't find the fake resolver, it drops back. + Thus, both old and new test suites can be run. + +TF/02 Added util/ratelimit.pl + +TF/03 Minor fix to the ratelimit code to improve its behaviour in case the + clock is set back in time. + +TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian + Candler . + +TF/05 The fix for PH/43 was not completely correct; widen_domains is always + OK for addresses that are the result of redirections. + +PH/48 A number of further additions for the benefit of the new test suite, + including a fake gethostbyname() that interfaces to the fake DNS resolver + (see PH/47 above). + +TF/06 The fix for widen_domains has also been applied to qualify_single and + search_parents which are the other dnslookup options that can cause + header rewrites. + +PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter + type ("H"). + +PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable. + +TF/07 Exim produced the error message "an SRV record indicated no SMTP + service" if it encountered an MX record with an empty target hostname. + The message is now "an MX or SRV record indicated no SMTP service". + +TF/08 Change PH/13 introduced the possibility that verify=helo may defer, + if the DNS of the sending site is misconfigured. This is quite a + common situation. This change restores the behaviour of treating a + helo verification defer as a failure. + +PH/51 If self=fail was set on a router, the bounce message did not include the + actual error message. + Exim version 4.52 ----------------- @@ -160,8 +721,9 @@ PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to "%lld" and "long long". Replaced the call to snprintf() with a call to string_vformat(). -PH/21 Added another message to those in 4.51/PH/42, namely "All relevant MX - records point to non-existent hosts". +PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX + records point to non-existent hosts", "retry timeout exceeded", and + "retry time not reached for any host after a long failure period". PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with experimental DomainKeys support: @@ -182,10 +744,12 @@ PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints db.h files). PH/26 Insert a lot of missing (void) casts for functions such as chown(), - chmod(), fcntl(), and sscanf(). These were picked up on a user's system - that detects such things. There doesn't seem to be a gcc warning option - for this - only an attribute that has to be put on the function's - prototype. I'm sure I haven't caught all of these, but it's a start. + chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were + picked up on a user's system that detects such things. There doesn't seem + to be a gcc warning option for this - only an attribute that has to be + put on the function's prototype. It seems that in Fedora Core 4 they have + set this on a number of new functions. No doubt there will be more in due + course. PH/27 If a dnslookup or manualroute router is set with verify=only, it need not specify a transport. However, if an address that was verified by such a @@ -198,6 +762,54 @@ PH/28 Changed -d+all to exclude +memory, because that information is very rarely of interest, but it makes the output a lot bigger. People tend to do -d+all out of habit. +PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the + code in os-type was giving problems when libc.so lives in lib64, like on + x86_64 Fedora Core. + +PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These + aren't the modern standard, and it seems that some systems' include files + don't always have them. Exim was already checking for some of the newer + ones like T_AAAA, and defining it itself. I've added checks for all the + record types that Exim uses. + +PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was + not automatically generating a new one, as it is supposed to. This + prevented TLS from working. If the file did exist, but contained invalid + data, a new version was generated, as expected. It was only the case of a + non-existent file that was broken. + +TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction + with a change in libdomainkeys > 0.64. + +TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved + from DNS. If the selector record carries the flag, it now has + precedence over the domain-wide flag. + +TK/12 Cleared some compiler warnings related to SPF, SRS and DK code. + +PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as + the use of a port name that isn't defined in /etc/services) occurred, the + message was deferred as in a normal delivery, and thus remained on the + spool, instead of being failed because of the mua_wrapper setting. This + is now fixed, and I tidied up some of the mua_wrapper messages at the + same time. + +SC/08 Eximstats: whilst parsing the mainlog(s), store information about + the messages in a hash of arrays rather than using individual hashes. + This is a bit cleaner and results in dramatic memory savings, albeit + at a slight CPU cost. + +SC/09 Eximstats: added the -show_rt and the -show_dt flags + as requested by Marc Sherman. + +SC/10 Eximstats: added histograms for user specified patterns as requested + by Marc Sherman. + +SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified. + +PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of + fopen() in the content-scanning modules that did not already have it. + Exim version 4.51 -----------------