-$Cambridge: exim/test/README,v 1.4 2006/07/26 14:39:13 ph10 Exp $
-
EXPORTABLE EXIM TEST SUITE
--------------------------
This document last updated for:
-Test Suite Version: 4.63
-Date: 25 July 2006
+Test Suite Version: 4.67
+Date: 20 February 2007
BACKGROUND
Defaults timestamp_timeout=480
in /etc/sudoers, a password lasts for 8 hours (a working day). It is
- probably not a good idea to run the tests as the Exim user, as this is
- recognized as special by Exim.
+ not permitted to run the tests as the Exim user because the test suite
+ tracks the two users independently. Using the same user would result
+ in false positives on some tests.
+
+ Further, some tests invoke sudo in an environment where there might not be
+ a TTY, so tickets should be global, not per-TTY. Taking this all together
+ and assuming a user of "exim-build", you might have this in sudoers:
+
+ Defaults:exim-build timestamp_timeout=480,!tty_tickets
(3) The login under which you run the tests must be in the exim group so that
it has access to logs, spool files, etc. The login should not be one of the
interface; when one is not found, some tests are skipped (with a warning
message).
+(9) Exim must be built with TRUSTED_CONFIG_LIST support, so that the test
+ configs can be placed into it. DISABLE_D_OPTION must not be used. If
+ ALT_CONFIG_PREFIX is used, it must contain the directory of the test-suite.
+ WHITELIST_D_MACROS should contain:
+
+ DIR:EXIM_PATH:AA:ACL:ACLRCPT:ACL_MAIL:ACL_PREDATA:ACL_RCPT:AFFIX:ALLOW:ARG1:ARG2:AUTHF:AUTHS:AUTH_ID_DOMAIN:BAD:BANNER:BB:BR:BRB:CERT:COM:COMMAND_USER:CONNECTCOND:CONTROL:CREQCIP:CREQMAC:CRL:CSS:D6:DATA:DCF:DDF:DEFAULTDWC:DELAY:DETAILS:DRATELIMIT:DYNAMIC_OPTION:ELI:ERROR_DETAILS:ERT:FAKE:FALLBACK:FILTER:FILTER_PREPEND_HOME:FORBID:FORBID_SMTP_CODE:FUSER:HAI:HAP:HARDLIMIT:HEADER_LINE_MAXSIZE:HEADER_MAXSIZE:HELO_MSG:HL:HOSTS:HOSTS_AVOID_TLS:HOSTS_MAX_TRY:HVH:IFACE:IGNORE_QUOTA:INC:INSERT:IP1:IP2:LAST:LDAPSERVERS:LENCHECK:LIMIT:LIST:LOG_SELECTOR:LS:MAXNM:MESSAGE_LOGS:MSIZE:NOTDAEMON:ONCE:ONLY:OPT:OPTION:ORDER:PAH:PEX:PORT:PTBC:QDG:QOLL:QUOTA:QUOTA_FILECOUNT:QWM:RCPT_MSG:REMEMBER:REQUIRE:RETRY:RETRY1:RETRY2:RETURN:RETURN_ERROR_DETAILS:REWRITE:ROUTE_DATA:RRATELIMIT:RT:S:SELECTOR:SELF:SERVER:SERVERS:SREQCIP:SREQMAC:SRV:STD:STRICT:SUB:SUBMISSION_OPTIONS:TIMEOUTDEFER:TIMES:TRUSTED:TRYCLEAR:UL:USE_SENDER:UTF8:VALUE:WMF:X:Y
+
+(10) Exim must *not* be built with USE_READLINE, as the test-suite's automation
+ assumes the simpler I/O model.
+ Exim must *not* be built with HEADERS_CHARSET set to UTF-8.
+
+
OPTIONAL EXTRAS
---------------
(3) Run "./configure" and then "make". This builds a few auxiliary programs
that are written in C.
-(4) Run "./runtest" (a Perl script) as described below.
+(4) echo $PWD/test-config >> your_TRUSTED_CONFIG_LIST_filename
-(5) If you want to see what tests are available, run "./listtests".
+(5) Run "./runtest" (a Perl script) as described below.
+
+(6) If you want to see what tests are available, run "./listtests".
BREAKING OUT OF THE TEST SCRIPT
bin/loaded Some dynamically loaded functions for testing dlfunc support.
-bin/server A script-driven SMTP server simulation.
+bin/mtpscript A script-driven SMTP/LMTP server simulation, on std{in,out}.
+
+bin/server A script-driven SMTP server simulation, over a socket.
+
+bin/showids Output the current uid, gid, euid, egid.
The runtest script also makes use of a number of ordinary commands such as
"cp", "kill", "more", and "rm", via the system() call. In some cases these are
These commands are not followed by any input data, or by a line of asterisks.
+
dbmbuild <file1> <file1>
This command runs the exim_dbmbuild utility to build a DBM file. It is used
"write" command (see below) that creates the input file.
+ dumpdb <dbname>
+
+This command runs the exim_dumpdb utility on the testing spool directory, using
+the database name given, for example: "dumpdb retry".
+
+
echo <text>
The text is written to the screen; this is used to output comments from
scripts.
+ exim_lock [options] <file name>
+
+This command runs the exim_lock utility with the given options and file name.
+The file remains locked with the following command (normally exim) is obeyed.
+
+
+ exinext <data>
+
+This command runs the exinext utility with the given argument data.
+
+
+ exigrep <data>
+
+This command runs the exigrep utility with the given data (the search pattern)
+on the current mainlog file.
+
+
gnutls
This command is present at the start of all but one of the tests that use
GnuTLS. It copies a pre-existing parameter file into the spool directory, so
that Exim does not have to re-create the file each time. The first GnuTLS test
-does not do this, in order to test that Exim can create the file (it takes some
-time).
+does not do this, in order to test that Exim can create the file.
killdaemon
are still in existence at the end of the run (for messages that were not
delivered) are not compared with saved versions.
+
no_stderr_check
If this command is encountered anywhere in the script, the stderr output from
different order.
-A number of standard file management commands are recognized. These are cat,
-chmod, chown, cp, ln, ls, du, mkdir, mkfifo, rm, rmdir, and touch. Some are run
-as root using "sudo".
+A number of standard file management commands are also recognized. These are
+cat, chmod, chown, cp, du, ln, ls, du, mkdir, mkfifo, rm, rmdir, and touch.
+Some are run as root using "sudo".
Commands with input
This command runs the auxiliary "client" program that simulates an SMTP client.
It is controlled by a script read from its standard input, details of which are
-given below. The only option is -t, which must be followed by a number, to
-specify the command timeout in seconds. The program connects to the given IP
-address and port, using the specified interface, if one is given.
+given below. There are two options. One is -t, which must be followed directly
+by a number, to specify the command timeout in seconds (e.g. -t5). The default
+timeout is 1 second. The other option is -tls-on-connect, which causes the
+client to try to start up a TLS session as soon as it has connected, without
+using the STARTTLS command. The client program connects to the given IP address
+and port, using the specified interface, if one is given.
client-ssl [<options>] <ip address> <port> [<outgoing interface>] \
may start with '<', which is not taken as part of the input data. If the
input does not match, the server bombs out with an error message.
-Here is a simple server example:
+Here is a simple example of server use in a test script:
server PORT_S
220 Greetings
messages to port PORT_S on the local host. When it has finished, the test
script waits for the "server" process to finish.
+The "mtpscript" program is like "server", except that it uses stdin/stdout for
+its input and output instead of a script. However, it is not called from test
+scripts; instead it is used as the command for pipe transports in some
+configurations, to simulate non-socket LMTP servers.
+
AUXILIARY DATA FILES
--------------------
projects / exim.git / blobdiff