/* If a cache database is available see if we can avoid the need to do an
actual callout by making use of previously-obtained data. */
-if (dbm_file != NULL)
+if (dbm_file)
{
dbdata_callout_cache_address *cache_address_record;
dbdata_callout_cache *cache_record = get_callout_cache_record(dbm_file,
/* If an unexpired cache record was found for this domain, see if the callout
process can be short-circuited. */
- if (cache_record != NULL)
+ if (cache_record)
{
/* In most cases, if an early command (up to and including MAIL FROM:<>)
was rejected, there is no point carrying on. The callout fails. However, if
but has not been done before, we are going to have to do a callout, so skip
remaining cache processing. */
- if (pm_mailfrom != NULL)
+ if (pm_mailfrom)
{
if (cache_record->postmaster_result == ccache_reject)
{
callout_cache_positive_expire,
callout_cache_negative_expire);
- if (cache_address_record != NULL)
+ if (cache_address_record)
{
if (cache_address_record->result == ccache_accept)
{
and cause the client to time out. So in this case we forgo the PIPELINING
optimization. */
- if (smtp_out != NULL && !disable_callout_flush) mac_smtp_fflush();
+ if (smtp_out && !disable_callout_flush) mac_smtp_fflush();
/* cutthrough-multi: if a nonfirst rcpt has the same routing as the first,
and we are holding a cutthrough conn open, we can just append the rcpt to
/* Now make connections to the hosts and do real callouts. The list of hosts
is passed in as an argument. */
- for (host = host_list; host != NULL && !done; host = host->next)
+ for (host = host_list; host && !done; host = host->next)
{
smtp_inblock inblock;
smtp_outblock outblock;
/* Skip this host if we don't have an IP address for it. */
- if (host->address == NULL)
+ if (!host->address)
{
DEBUG(D_verify) debug_printf("no IP address for host name %s: skipping\n",
host->name);
/* Set IPv4 or IPv6 */
- host_af = (Ustrchr(host->address, ':') == NULL)? AF_INET:AF_INET6;
+ host_af = Ustrchr(host->address, ':') == NULL ? AF_INET : AF_INET6;
/* Expand and interpret the interface and port strings. The latter will not
be used if there is a host-specific port (e.g. from a manualroute router).
addr->transport);
if (inblock.sock < 0)
{
+ HDEBUG(D_verify) debug_printf("connect: %s\n", strerror(errno));
addr->message = string_sprintf("could not connect to %s [%s]: %s",
host->name, host->address, strerror(errno));
transport_name = NULL;
/* Expand the helo_data string to find the host name to use. */
- if (tf->helo_data != NULL)
+ if (tf->helo_data)
{
- uschar *s = expand_string(tf->helo_data);
- if (s == NULL)
+ uschar * s = expand_string(tf->helo_data);
+ if (!s)
log_write(0, LOG_MAIN|LOG_PANIC, "<%s>: failed to expand transport's "
"helo_data value for callout: %s", addr->address,
expand_string_message);
: 0;
}
- size_str = peer_offered & PEER_OFFERED_SIZE
+ size_str = options & vopt_is_recipient && peer_offered & PEER_OFFERED_SIZE
? string_sprintf(" SIZE=%d", message_size + ob->size_addition) : US"";
#ifdef SUPPORT_TLS
- tls_offered = !!(peer_offered & PEER_OFFERED_TLS);
+ smtp_peer_options |= peer_offered & PEER_OFFERED_TLS;
#endif
/* If TLS is available on this connection attempt to
int oldtimeout = ob->command_timeout;
int rc;
- tls_negotiate:
ob->command_timeout = callout;
rc = tls_client_start(inblock.sock, host, addr, addr->transport
# ifdef EXPERIMENTAL_DANE
connection, if the options permit it for this host. */
if (rc != OK)
{
- if (rc == DEFER)
- {
- (void)close(inblock.sock);
+ HDEBUG(D_transport|D_acl|D_v) debug_printf(" SMTP(close)>>\n");
+ (void)close(inblock.sock);
# ifndef DISABLE_EVENT
- (void) event_raise(addr->transport->event_action,
- US"tcp:close", NULL);
+ (void) event_raise(addr->transport->event_action,
+ US"tcp:close", NULL);
# endif
- if ( ob->tls_tempfail_tryclear
- && !smtps
- && verify_check_given_host(&ob->hosts_require_tls, host) != OK
- )
- {
- log_write(0, LOG_MAIN, "TLS session failure:"
- " delivering unencrypted to %s [%s] (not in hosts_require_tls)",
- host->name, host->address);
- suppress_tls = TRUE;
- goto tls_retry_connection;
- }
+ if ( ob->tls_tempfail_tryclear
+ && !smtps
+ && verify_check_given_host(&ob->hosts_require_tls, host) != OK
+ )
+ {
+ log_write(0, LOG_MAIN, "TLS session failure:"
+ " callout unencrypted to %s [%s] (not in hosts_require_tls)",
+ host->name, host->address);
+ suppress_tls = TRUE;
+ goto tls_retry_connection;
}
/*save_errno = ERRNO_TLSFAILURE;*/
#ifdef SUPPORT_TLS
tls_close(FALSE, TRUE);
#endif
+ HDEBUG(D_transport|D_acl|D_v) debug_printf(" SMTP(close)>>\n");
(void)close(inblock.sock);
#ifndef DISABLE_EVENT
(void) event_raise(addr->transport->event_action,
{
/* Ensure no cutthrough on multiple address verifies */
if (options & vopt_callout_recipsender)
- cancel_cutthrough_connection("multiple verify calls");
- if (send_quit) (void)smtp_write_command(&outblock, FALSE, "QUIT\r\n");
+ cancel_cutthrough_connection("not usable for cutthrough");
+ if (send_quit)
+ (void) smtp_write_command(&outblock, FALSE, "QUIT\r\n");
#ifdef SUPPORT_TLS
tls_close(FALSE, TRUE);
#endif
+ HDEBUG(D_transport|D_acl|D_v) debug_printf(" SMTP(close)>>\n");
(void)close(inblock.sock);
#ifndef DISABLE_EVENT
(void) event_raise(addr->transport->event_action, US"tcp:close", NULL);
if ( !(options & vopt_callout_no_cache)
&& new_address_record.result != ccache_unknown)
{
- if (dbm_file == NULL)
+ if (!dbm_file)
dbm_file = dbfn_open(US"callout", O_RDWR|O_CREAT, &dbblock, FALSE);
- if (dbm_file == NULL)
+ if (!dbm_file)
{
HDEBUG(D_verify) debug_printf("no callout cache available\n");
}
else /* !done */
{
- uschar *dullmsg = string_sprintf("Could not complete %s verify callout",
+ uschar * dullmsg = string_sprintf("Could not complete %s verify callout",
options & vopt_is_recipient ? "recipient" : "sender");
yield = DEFER;
- if (host_list->next != NULL || addr->message == NULL) addr->message = dullmsg;
+ if (host_list->next || !addr->message)
+ addr->message = dullmsg;
- addr->user_message = (!smtp_return_error_details)? dullmsg :
- string_sprintf("%s for <%s>.\n"
+ addr->user_message = smtp_return_error_details
+ ? string_sprintf("%s for <%s>.\n"
"The mail server(s) for the domain may be temporarily unreachable, or\n"
"they may be permanently unreachable from this server. In the latter case,\n%s",
dullmsg, addr->address,
options & vopt_is_recipient
- ? "the address will never be accepted."
+ ? "the address will never be accepted."
: "you need to change the address or create an MX record for its domain\n"
"if it is supposed to be generally accessible from the Internet.\n"
- "Talk to your mail administrator for details.");
+ "Talk to your mail administrator for details.")
+ : dullmsg;
/* Force a specific error code */
/* Come here from within the cache-reading code on fast-track exit. */
END_CALLOUT:
-if (dbm_file != NULL) dbfn_close(dbm_file);
+if (dbm_file) dbfn_close(dbm_file);
return yield;
}
addr2 = *addr;
HDEBUG(D_acl) debug_printf("----------- %s cutthrough setup ------------\n",
rcpt_count > 1 ? "more" : "start");
-rc= verify_address(&addr2, NULL,
+rc = verify_address(&addr2, NULL,
vopt_is_recipient | vopt_callout_recipsender | vopt_callout_no_cache,
CUTTHROUGH_CMD_TIMEOUT, -1, -1,
NULL, NULL, NULL);
+addr->message = addr2.message;
+addr->user_message = addr2.user_message;
HDEBUG(D_acl) debug_printf("----------- end cutthrough setup ------------\n");
return rc;
}
}
-/* fd and options args only to match write_chunk() */
+/* fd and tctx args only to match write_chunk() */
static BOOL
-cutthrough_write_chunk(int fd, uschar * s, int len, unsigned options)
+cutthrough_write_chunk(int fd, transport_ctx * tctx, uschar * s, int len)
{
uschar * s2;
while(s && (s2 = Ustrchr(s, '\n')))
BOOL
cutthrough_headers_send(void)
{
+transport_ctx tctx;
+
if(cutthrough.fd < 0)
return FALSE;
*/
HDEBUG(D_acl) debug_printf("----------- start cutthrough headers send -----------\n");
-if (!transport_headers_send(&cutthrough.addr, cutthrough.fd,
- cutthrough.addr.transport,
- &cutthrough_write_chunk, topt_use_crlf))
+tctx.tblock = cutthrough.addr.transport;
+tctx.addr = &cutthrough.addr;
+tctx.check_string = US".";
+tctx.escape_string = US"..";
+tctx.options = topt_use_crlf;
+
+if (!transport_headers_send(cutthrough.fd, &tctx, &cutthrough_write_chunk))
return FALSE;
HDEBUG(D_acl) debug_printf("----------- done cutthrough headers send ------------\n");
#ifdef SUPPORT_TLS
tls_close(FALSE, TRUE);
#endif
+ HDEBUG(D_transport|D_acl|D_v) debug_printf(" SMTP(close)>>\n");
(void)close(cutthrough.fd);
cutthrough.fd = -1;
HDEBUG(D_acl) debug_printf("----------- cutthrough shutdown (%s) ------------\n", why);
projects / exim.git / blobdiff