-/* $Cambridge: exim/src/src/verify.c,v 1.3 2004/11/05 16:53:28 ph10 Exp $ */
+/* $Cambridge: exim/src/src/verify.c,v 1.55 2010/06/05 23:50:18 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2004 */
+/* Copyright (c) University of Cambridge 1995 - 2009 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions concerned with verifying things. The original code for callout
static tree_node *dnsbl_cache = NULL;
+/* Bits for match_type in one_check_dnsbl() */
+
+#define MT_NOT 1
+#define MT_ALL 2
+
+
/*************************************************
* Retrieve a callout cache record *
options the verification options - these bits are used:
vopt_is_recipient => this is a recipient address
vopt_callout_no_cache => don't use callout cache
+ vopt_callout_fullpm => if postmaster check, do full one
vopt_callout_random => do the "random" thing
vopt_callout_recipsender => use real sender for recipient
vopt_callout_recippmaster => use postmaster for recipient
static int
do_callout(address_item *addr, host_item *host_list, transport_feedback *tf,
- int callout, int callout_overall, int callout_connect, int options,
+ int callout, int callout_overall, int callout_connect, int options,
uschar *se_mailfrom, uschar *pm_mailfrom)
{
BOOL is_recipient = (options & vopt_is_recipient) != 0;
BOOL callout_random = (options & vopt_callout_random) != 0;
int yield = OK;
+int old_domain_cache_result = ccache_accept;
BOOL done = FALSE;
uschar *address_key;
uschar *from_address;
uschar *random_local_part = NULL;
-uschar **failure_ptr = is_recipient?
+uschar *save_deliver_domain = deliver_domain;
+uschar **failure_ptr = is_recipient?
&recipient_verify_failure : &sender_verify_failure;
open_db dbblock;
open_db *dbm_file = NULL;
if (cache_record != NULL)
{
- /* If an early command (up to and including MAIL FROM:<>) was rejected,
- there is no point carrying on. The callout fails. */
-
- if (cache_record->result == ccache_reject)
+ /* In most cases, if an early command (up to and including MAIL FROM:<>)
+ was rejected, there is no point carrying on. The callout fails. However, if
+ we are doing a recipient verification with use_sender or use_postmaster
+ set, a previous failure of MAIL FROM:<> doesn't count, because this time we
+ will be using a non-empty sender. We have to remember this situation so as
+ not to disturb the cached domain value if this whole verification succeeds
+ (we don't want it turning into "accept"). */
+
+ old_domain_cache_result = cache_record->result;
+
+ if (cache_record->result == ccache_reject ||
+ (*from_address == 0 && cache_record->result == ccache_reject_mfnull))
{
setflag(addr, af_verify_nsfail);
HDEBUG(D_verify)
setflag(addr, af_verify_nsfail);
addr->user_message = US"(result of an earlier callout reused).";
yield = FAIL;
- *failure_ptr = US"mail";
+ *failure_ptr = US"mail";
goto END_CALLOUT;
}
debug_printf("callout cache: domain does not accept "
"RCPT TO:<postmaster@domain>\n");
yield = FAIL;
- *failure_ptr = US"postmaster";
+ *failure_ptr = US"postmaster";
setflag(addr, af_verify_pmfail);
addr->user_message = US"(result of earlier verification reused).";
goto END_CALLOUT;
HDEBUG(D_verify)
debug_printf("callout cache: address record is negative\n");
addr->user_message = US"Previous (cached) callout verification failure";
- *failure_ptr = US"recipient";
+ *failure_ptr = US"recipient";
yield = FAIL;
}
goto END_CALLOUT;
if (callout_connect < 0) callout_connect = callout;
callout_start_time = time(NULL);
+/* Before doing a real callout, if this is an SMTP connection, flush the SMTP
+output because a callout might take some time. When PIPELINING is active and
+there are many recipients, the total time for doing lots of callouts can add up
+and cause the client to time out. So in this case we forgo the PIPELINING
+optimization. */
+
+if (smtp_out != NULL && !disable_callout_flush) mac_smtp_fflush();
+
/* Now make connections to the hosts and do real callouts. The list of hosts
is passed in as an argument. */
smtp_outblock outblock;
int host_af;
int port = 25;
+ BOOL send_quit = TRUE;
+ uschar *active_hostname = smtp_active_hostname;
uschar *helo = US"HELO";
uschar *interface = NULL; /* Outgoing interface to use; NULL => any */
uschar inbuffer[4096];
host_af = (Ustrchr(host->address, ':') == NULL)? AF_INET:AF_INET6;
- /* Expand and interpret the interface and port strings. This has to
- be delayed till now, because they may expand differently for different
- hosts. If there's a failure, log it, but carry on with the defaults. */
+ /* Expand and interpret the interface and port strings. The latter will not
+ be used if there is a host-specific port (e.g. from a manualroute router).
+ This has to be delayed till now, because they may expand differently for
+ different hosts. If there's a failure, log it, but carry on with the
+ defaults. */
deliver_host = host->name;
deliver_host_address = host->address;
+ deliver_domain = addr->domain;
+
if (!smtp_get_interface(tf->interface, host_af, addr, NULL, &interface,
US"callout") ||
!smtp_get_port(tf->port, addr, &port, US"callout"))
log_write(0, LOG_MAIN|LOG_PANIC, "<%s>: %s", addr->address,
addr->message);
- deliver_host = deliver_host_address = NULL;
/* Set HELO string according to the protocol */
{
addr->message = string_sprintf("could not connect to %s [%s]: %s",
host->name, host->address, strerror(errno));
+ deliver_host = deliver_host_address = NULL;
+ deliver_domain = save_deliver_domain;
continue;
}
- /* Wait for initial response, and then run the initial SMTP commands. The
- smtp_write_command() function leaves its command in big_buffer. This is
- used in error responses. Initialize it in case the connection is
- rejected. */
+ /* Expand the helo_data string to find the host name to use. */
+
+ if (tf->helo_data != NULL)
+ {
+ uschar *s = expand_string(tf->helo_data);
+ if (s == NULL)
+ log_write(0, LOG_MAIN|LOG_PANIC, "<%s>: failed to expand transport's "
+ "helo_data value for callout: %s", addr->address,
+ expand_string_message);
+ else active_hostname = s;
+ }
+
+ deliver_host = deliver_host_address = NULL;
+ deliver_domain = save_deliver_domain;
+
+ /* Wait for initial response, and send HELO. The smtp_write_command()
+ function leaves its command in big_buffer. This is used in error responses.
+ Initialize it in case the connection is rejected. */
Ustrcpy(big_buffer, "initial connection");
done =
smtp_read_response(&inblock, responsebuffer, sizeof(responsebuffer),
'2', callout) &&
-
smtp_write_command(&outblock, FALSE, "%s %s\r\n", helo,
- smtp_active_hostname) >= 0 &&
+ active_hostname) >= 0 &&
smtp_read_response(&inblock, responsebuffer, sizeof(responsebuffer),
- '2', callout) &&
+ '2', callout);
+
+ /* Failure to accept HELO is cached; this blocks the whole domain for all
+ senders. I/O errors and defer responses are not cached. */
+
+ if (!done)
+ {
+ *failure_ptr = US"mail"; /* At or before MAIL */
+ if (errno == 0 && responsebuffer[0] == '5')
+ {
+ setflag(addr, af_verify_nsfail);
+ new_domain_record.result = ccache_reject;
+ }
+ }
+ /* Send the MAIL command */
+
+ else done =
smtp_write_command(&outblock, FALSE, "MAIL FROM:<%s>\r\n",
from_address) >= 0 &&
smtp_read_response(&inblock, responsebuffer, sizeof(responsebuffer),
'2', callout);
- /* If the host gave an initial error, or does not accept HELO or MAIL
- FROM:<>, arrange to cache this information, but don't record anything for an
- I/O error or a defer. Do not cache rejections when a non-empty sender has
- been used, because that blocks the whole domain for all senders. */
+ /* If the host does not accept MAIL FROM:<>, arrange to cache this
+ information, but again, don't record anything for an I/O error or a defer. Do
+ not cache rejections of MAIL when a non-empty sender has been used, because
+ that blocks the whole domain for all senders. */
if (!done)
{
- *failure_ptr = US"mail";
+ *failure_ptr = US"mail"; /* At or before MAIL */
if (errno == 0 && responsebuffer[0] == '5')
{
setflag(addr, af_verify_nsfail);
- if (from_address[0] == 0) new_domain_record.result = ccache_reject;
+ if (from_address[0] == 0)
+ new_domain_record.result = ccache_reject_mfnull;
}
}
/* Otherwise, proceed to check a "random" address (if required), then the
given address, and the postmaster address (if required). Between each check,
issue RSET, because some servers accept only one recipient after MAIL
- FROM:<>. */
+ FROM:<>.
+
+ Before doing this, set the result in the domain cache record to "accept",
+ unless its previous value was ccache_reject_mfnull. In that case, the domain
+ rejects MAIL FROM:<> and we want to continue to remember that. When that is
+ the case, we have got here only in the case of a recipient verification with
+ a non-null sender. */
else
{
- new_domain_record.result = ccache_accept;
+ new_domain_record.result =
+ (old_domain_cache_result == ccache_reject_mfnull)?
+ ccache_reject_mfnull: ccache_accept;
/* Do the random local part check first */
smtp_read_response(&inblock, responsebuffer, sizeof(responsebuffer),
'2', callout) &&
- smtp_write_command(&outblock, FALSE, "MAIL FROM:<>\r\n") >= 0 &&
+ smtp_write_command(&outblock, FALSE, "MAIL FROM:<%s>\r\n",
+ from_address) >= 0 &&
smtp_read_response(&inblock, responsebuffer, sizeof(responsebuffer),
'2', callout);
}
if (new_domain_record.random_result != ccache_accept && done)
{
+ /* Get the rcpt_include_affixes flag from the transport if there is one,
+ but assume FALSE if there is not. */
+
done =
smtp_write_command(&outblock, FALSE, "RCPT TO:<%.1000s>\r\n",
- addr->address) >= 0 &&
+ transport_rcpt_address(addr,
+ (addr->transport == NULL)? FALSE :
+ addr->transport->rcpt_include_affixes)) >= 0 &&
smtp_read_response(&inblock, responsebuffer, sizeof(responsebuffer),
'2', callout);
new_address_record.result = ccache_accept;
else if (errno == 0 && responsebuffer[0] == '5')
{
- *failure_ptr = US"recipient";
+ *failure_ptr = US"recipient";
new_address_record.result = ccache_reject;
- }
+ }
- /* Do postmaster check if requested */
+ /* Do postmaster check if requested; if a full check is required, we
+ check for RCPT TO:<postmaster> (no domain) in accordance with RFC 821. */
if (done && pm_mailfrom != NULL)
{
smtp_read_response(&inblock, responsebuffer,
sizeof(responsebuffer), '2', callout) &&
+ /* First try using the current domain */
+
+ ((
smtp_write_command(&outblock, FALSE,
"RCPT TO:<postmaster@%.1000s>\r\n", addr->domain) >= 0 &&
smtp_read_response(&inblock, responsebuffer,
- sizeof(responsebuffer), '2', callout);
+ sizeof(responsebuffer), '2', callout)
+ )
+
+ ||
+
+ /* If that doesn't work, and a full check is requested,
+ try without the domain. */
+
+ (
+ (options & vopt_callout_fullpm) != 0 &&
+ smtp_write_command(&outblock, FALSE,
+ "RCPT TO:<postmaster>\r\n") >= 0 &&
+ smtp_read_response(&inblock, responsebuffer,
+ sizeof(responsebuffer), '2', callout)
+ ));
+
+ /* Sort out the cache record */
new_domain_record.postmaster_stamp = time(NULL);
new_domain_record.postmaster_result = ccache_accept;
else if (errno == 0 && responsebuffer[0] == '5')
{
- *failure_ptr = US"postmaster";
+ *failure_ptr = US"postmaster";
setflag(addr, af_verify_pmfail);
new_domain_record.postmaster_result = ccache_reject;
}
}
} /* Random not accepted */
- } /* MAIL FROM:<> accepted */
+ } /* MAIL FROM: accepted */
/* For any failure of the main check, other than a negative response, we just
close the connection and carry on. We can identify a negative response by the
if (errno == ETIMEDOUT)
{
HDEBUG(D_verify) debug_printf("SMTP timeout\n");
+ send_quit = FALSE;
}
else if (errno == 0)
{
/* End the SMTP conversation and close the connection. */
- (void)smtp_write_command(&outblock, FALSE, "QUIT\r\n");
- close(inblock.sock);
+ if (send_quit) (void)smtp_write_command(&outblock, FALSE, "QUIT\r\n");
+ (void)close(inblock.sock);
} /* Loop through all hosts, while !done */
/* If we get here with done == TRUE, a successful callout happened, and yield
However, there may be domain-specific information to cache in both cases.
The value of the result field in the new_domain record is ccache_unknown if
-there was an error before or with MAIL FROM:<>, and errno was not zero,
+there was an error before or with MAIL FROM:, and errno was not zero,
implying some kind of I/O error. We don't want to write the cache in that case.
-Otherwise the value is ccache_accept or ccache_reject. */
+Otherwise the value is ccache_accept, ccache_reject, or ccache_reject_mfnull. */
if (!callout_no_cache && new_domain_record.result != ccache_unknown)
{
vaddr->user_message = addr->user_message;
vaddr->basic_errno = addr->basic_errno;
vaddr->more_errno = addr->more_errno;
+ vaddr->p.address_data = addr->p.address_data;
+ copyflag(vaddr, addr, af_pass_message);
}
return yield;
}
+/**************************************************
+* printf that automatically handles TLS if needed *
+***************************************************/
+
+/* This function is used by verify_address() as a substitute for all fprintf()
+calls; a direct fprintf() will not produce output in a TLS SMTP session, such
+as a response to an EXPN command. smtp_in.c makes smtp_printf available but
+that assumes that we always use the smtp_out FILE* when not using TLS or the
+ssl buffer when we are. Instead we take a FILE* parameter and check to see if
+that is smtp_out; if so, smtp_printf() with TLS support, otherwise regular
+fprintf().
+
+Arguments:
+ f the candidate FILE* to write to
+ format format string
+ ... optional arguments
+
+Returns:
+ nothing
+*/
+
+static void PRINTF_FUNCTION(2,3)
+respond_printf(FILE *f, char *format, ...)
+{
+va_list ap;
+
+va_start(ap, format);
+if (smtp_out && (f == smtp_out))
+ smtp_vprintf(format, ap);
+else
+ vfprintf(f, format, ap);
+va_end(ap);
+}
+
+
+
/*************************************************
* Verify an email address *
*************************************************/
rewriting and messages from callouts
vopt_qualify => qualify an unqualified address; else error
vopt_expn => called from SMTP EXPN command
+ vopt_success_on_redirect => when a new address is generated
+ the verification instantly succeeds
These ones are used by do_callout() -- the options variable
is passed to it.
+ vopt_callout_fullpm => if postmaster check, do full one
vopt_callout_no_cache => don't use callout cache
vopt_callout_random => do the "random" thing
vopt_callout_recipsender => use real sender for recipient
for individual commands
callout_overall if > 0, gives overall timeout for the callout function;
if < 0, a default is used (see do_callout())
- callout_connect the connection timeout for callouts
+ callout_connect the connection timeout for callouts
se_mailfrom when callout is requested to verify a sender, use this
in MAIL FROM; NULL => ""
pm_mailfrom when callout is requested, if non-NULL, do the postmaster
int
verify_address(address_item *vaddr, FILE *f, int options, int callout,
- int callout_overall, int callout_connect, uschar *se_mailfrom,
+ int callout_overall, int callout_connect, uschar *se_mailfrom,
uschar *pm_mailfrom, BOOL *routed)
{
BOOL allok = TRUE;
BOOL full_info = (f == NULL)? FALSE : (debug_selector != 0);
BOOL is_recipient = (options & vopt_is_recipient) != 0;
BOOL expn = (options & vopt_expn) != 0;
+BOOL success_on_redirect = (options & vopt_success_on_redirect) != 0;
int i;
int yield = OK;
int verify_type = expn? v_expn :
address_item *addr_remote = NULL;
address_item *addr_local = NULL;
address_item *addr_succeed = NULL;
-uschar **failure_ptr = is_recipient?
+uschar **failure_ptr = is_recipient?
&recipient_verify_failure : &sender_verify_failure;
uschar *ko_prefix, *cr;
uschar *address = vaddr->address;
if ((options & vopt_qualify) == 0)
{
if (f != NULL)
- fprintf(f, "%sA domain is required for \"%s\"%s\n", ko_prefix, address,
- cr);
- *failure_ptr = US"qualify";
+ respond_printf(f, "%sA domain is required for \"%s\"%s\n",
+ ko_prefix, address, cr);
+ *failure_ptr = US"qualify";
return FAIL;
}
address = rewrite_address_qualify(address, is_recipient);
{
host_item *host_list = addr->host_list;
- /* Default, if no remote transport, to NULL for the interface (=> any),
- "smtp" for the port, and "smtp" for the protocol. */
-
- transport_feedback tf = { NULL, US"smtp", US"smtp", NULL, FALSE, FALSE };
+ /* Make up some data for use in the case where there is no remote
+ transport. */
+
+ transport_feedback tf = {
+ NULL, /* interface (=> any) */
+ US"smtp", /* port */
+ US"smtp", /* protocol */
+ NULL, /* hosts */
+ US"$smtp_active_hostname", /* helo_data */
+ FALSE, /* hosts_override */
+ FALSE, /* hosts_randomize */
+ FALSE, /* gethostbyname */
+ TRUE, /* qualify_single */
+ FALSE /* search_parents */
+ };
/* If verification yielded a remote transport, we want to use that
transport's options, so as to mimic what would happen if we were really
if (addr->transport != NULL && !addr->transport->info->local)
{
- (void)(addr->transport->setup)(addr->transport, addr, &tf, NULL);
+ (void)(addr->transport->setup)(addr->transport, addr, &tf, 0, 0, NULL);
/* If the transport has hosts and the router does not, or if the
transport is configured to override the router's hosts, we must build a
if (tf.hosts != NULL && (host_list == NULL || tf.hosts_override))
{
uschar *s;
+ uschar *save_deliver_domain = deliver_domain;
+ uschar *save_deliver_localpart = deliver_localpart;
host_list = NULL; /* Ignore the router's hosts */
deliver_domain = addr->domain;
deliver_localpart = addr->local_part;
s = expand_string(tf.hosts);
- deliver_domain = deliver_localpart = NULL;
+ deliver_domain = save_deliver_domain;
+ deliver_localpart = save_deliver_localpart;
if (s == NULL)
{
}
else
{
+ int flags;
uschar *canonical_name;
- host_item *host;
+ host_item *host, *nexthost;
host_build_hostlist(&host_list, s, tf.hosts_randomize);
/* Just ignore failures to find a host address. If we don't manage
- to find any addresses, the callout will defer. */
+ to find any addresses, the callout will defer. Note that more than
+ one address may be found for a single host, which will result in
+ additional host items being inserted into the chain. Hence we must
+ save the next host first. */
+
+ flags = HOST_FIND_BY_A;
+ if (tf.qualify_single) flags |= HOST_FIND_QUALIFY_SINGLE;
+ if (tf.search_parents) flags |= HOST_FIND_SEARCH_PARENTS;
- for (host = host_list; host != NULL; host = host->next)
+ for (host = host_list; host != NULL; host = nexthost)
{
- if (tf.gethostbyname || string_is_ip_address(host->name, NULL))
- (void)host_find_byname(host, NULL, &canonical_name, TRUE);
+ nexthost = host->next;
+ if (tf.gethostbyname ||
+ string_is_ip_address(host->name, NULL) != 0)
+ (void)host_find_byname(host, NULL, flags, &canonical_name, TRUE);
else
- {
- int flags = HOST_FIND_BY_A;
- if (tf.qualify_single) flags |= HOST_FIND_QUALIFY_SINGLE;
- if (tf.search_parents) flags |= HOST_FIND_SEARCH_PARENTS;
(void)host_find_bydns(host, NULL, flags, NULL, NULL, NULL,
&canonical_name, NULL);
- }
}
}
}
}
- /* Can only do a callout if we have at least one host! If the callout
+ /* Can only do a callout if we have at least one host! If the callout
fails, it will have set ${sender,recipient}_verify_failure. */
if (host_list != NULL)
}
}
}
-
+
/* Otherwise, any failure is a routing failure */
-
- else *failure_ptr = US"route";
+
+ else *failure_ptr = US"route";
/* A router may return REROUTED if it has set up a child address as a result
of a change of domain name (typically from widening). In this case we always
allok = FALSE;
if (f != NULL)
{
- fprintf(f, "%s%s %s", ko_prefix, address,
+ address_item *p = addr->parent;
+
+ respond_printf(f, "%s%s %s", ko_prefix,
+ full_info? addr->address : address,
address_test_mode? "is undeliverable" : "failed to verify");
if (!expn && admin_user)
{
if (addr->basic_errno > 0)
- fprintf(f, ": %s", strerror(addr->basic_errno));
+ respond_printf(f, ": %s", strerror(addr->basic_errno));
if (addr->message != NULL)
- fprintf(f, ":\n %s", addr->message);
+ respond_printf(f, ": %s", addr->message);
+ }
+
+ /* Show parents iff doing full info */
+
+ if (full_info) while (p != NULL)
+ {
+ respond_printf(f, "%s\n <-- %s", cr, p->address);
+ p = p->parent;
}
- fprintf(f, "%s\n", cr);
+ respond_printf(f, "%s\n", cr);
}
if (!full_info) return copy_error(vaddr, addr, FAIL);
allok = FALSE;
if (f != NULL)
{
- fprintf(f, "%s%s cannot be resolved at this time", ko_prefix, address);
+ address_item *p = addr->parent;
+ respond_printf(f, "%s%s cannot be resolved at this time", ko_prefix,
+ full_info? addr->address : address);
if (!expn && admin_user)
{
if (addr->basic_errno > 0)
- fprintf(f, ":\n %s", strerror(addr->basic_errno));
+ respond_printf(f, ": %s", strerror(addr->basic_errno));
if (addr->message != NULL)
- fprintf(f, ":\n %s", addr->message);
+ respond_printf(f, ": %s", addr->message);
else if (addr->basic_errno <= 0)
- fprintf(f, ":\n unknown error");
+ respond_printf(f, ": unknown error");
}
- fprintf(f, "%s\n", cr);
+ /* Show parents iff doing full info */
+
+ if (full_info) while (p != NULL)
+ {
+ respond_printf(f, "%s\n <-- %s", cr, p->address);
+ p = p->parent;
+ }
+ respond_printf(f, "%s\n", cr);
}
if (!full_info) return copy_error(vaddr, addr, DEFER);
else if (yield == OK) yield = DEFER;
}
/* If we are handling EXPN, we do not want to continue to route beyond
- the top level. */
+ the top level (whose address is in "address"). */
else if (expn)
{
if (addr_new == NULL)
{
if (addr_local == NULL && addr_remote == NULL)
- fprintf(f, "250 mail to <%s> is discarded\r\n", address);
+ respond_printf(f, "250 mail to <%s> is discarded\r\n", address);
else
- fprintf(f, "250 <%s>\r\n", address);
+ respond_printf(f, "250 <%s>\r\n", address);
}
else while (addr_new != NULL)
{
address_item *addr2 = addr_new;
addr_new = addr2->next;
if (addr_new == NULL) ok_prefix = US"250 ";
- fprintf(f, "%s<%s>\r\n", ok_prefix, addr2->address);
+ respond_printf(f, "%s<%s>\r\n", ok_prefix, addr2->address);
}
return OK;
}
generated address. */
if (!full_info && /* Stop if short info wanted AND */
- (addr_new == NULL || /* No new address OR */
- addr_new->next != NULL || /* More than one new address OR */
- testflag(addr_new, af_pfr))) /* New address is pfr */
+ (((addr_new == NULL || /* No new address OR */
+ addr_new->next != NULL || /* More than one new address OR */
+ testflag(addr_new, af_pfr))) /* New address is pfr */
+ || /* OR */
+ (addr_new != NULL && /* At least one new address AND */
+ success_on_redirect))) /* success_on_redirect is set */
{
if (f != NULL) fprintf(f, "%s %s\n", address,
address_test_mode? "is deliverable" : "verified");
discarded, usually because of the use of :blackhole: in an alias file. */
if (allok && addr_local == NULL && addr_remote == NULL)
+ {
fprintf(f, "mail to %s is discarded\n", address);
+ return yield;
+ }
-else for (addr_list = addr_local, i = 0; i < 2; addr_list = addr_remote, i++)
+for (addr_list = addr_local, i = 0; i < 2; addr_list = addr_remote, i++)
{
while (addr_list != NULL)
{
addr_list = addr->next;
fprintf(f, "%s", CS addr->address);
+#ifdef EXPERIMENTAL_SRS
+ if(addr->p.srs_sender)
+ fprintf(f, " [srs = %s]", addr->p.srs_sender);
+#endif
+
+ /* If the address is a duplicate, show something about it. */
+
+ if (!testflag(addr, af_pfr))
+ {
+ tree_node *tnode;
+ if ((tnode = tree_search(tree_duplicates, addr->unique)) != NULL)
+ fprintf(f, " [duplicate, would not be delivered]");
+ else tree_add_duplicate(addr->unique, addr);
+ }
+
+ /* Now show its parents */
+
while (p != NULL)
{
fprintf(f, "\n <-- %s", p->address);
}
}
-/* Will be DEFER or FAIL if any one address has, only for full_info (which is
+/* Will be DEFER or FAIL if any one address has, only for full_info (which is
the -bv or -bt case). */
-return yield;
+return yield;
}
{
header_line *h;
uschar *colon, *s;
+int yield = OK;
-for (h = header_list; h != NULL; h = h->next)
+for (h = header_list; h != NULL && yield == OK; h = h->next)
{
if (h->type != htype_from &&
h->type != htype_reply_to &&
s = colon + 1;
while (isspace(*s)) s++;
- parse_allow_group = TRUE; /* Allow group syntax */
+ /* Loop for multiple addresses in the header, enabling group syntax. Note
+ that we have to reset this after the header has been scanned. */
- /* Loop for multiple addresses in the header */
+ parse_allow_group = TRUE;
while (*s != 0)
{
int start, end, domain;
/* Temporarily terminate the string at this point, and extract the
- operative address within. */
+ operative address within, allowing group syntax. */
*ss = 0;
recipient = parse_extract_address(s,&errmess,&start,&end,&domain,FALSE);
{
uschar *verb = US"is";
uschar *t = ss;
+ uschar *tt = colon;
int len;
/* Arrange not to include any white space at the end in the
- error message. */
+ error message or the header name. */
while (t > s && isspace(t[-1])) t--;
+ while (tt > h->text && isspace(tt[-1])) tt--;
- /* Add the address which failed to the error message, since in a
+ /* Add the address that failed to the error message, since in a
header with very many addresses it is sometimes hard to spot
which one is at fault. However, limit the amount of address to
quote - cases have been seen where, for example, a missing double
}
*msgptr = string_printing(
- string_sprintf("%s: failing address in \"%.*s\" header %s: %.*s",
- errmess, colon - h->text, h->text, verb, len, s));
+ string_sprintf("%s: failing address in \"%.*s:\" header %s: %.*s",
+ errmess, tt - h->text, h->text, verb, len, s));
- return FAIL;
+ yield = FAIL;
+ break; /* Out of address loop */
}
/* Advance to the next address */
s = ss + (terminator? 1:0);
while (isspace(*s)) s++;
} /* Next address */
- } /* Next header */
-return OK;
+ parse_allow_group = FALSE;
+ parse_found_group = FALSE;
+ } /* Next header unless yield has been set FALSE */
+
+return yield;
}
+/*************************************************
+* Check for blind recipients *
+*************************************************/
+
+/* This function checks that every (envelope) recipient is mentioned in either
+the To: or Cc: header lines, thus detecting blind carbon copies.
+
+There are two ways of scanning that could be used: either scan the header lines
+and tick off the recipients, or scan the recipients and check the header lines.
+The original proposed patch did the former, but I have chosen to do the latter,
+because (a) it requires no memory and (b) will use fewer resources when there
+are many addresses in To: and/or Cc: and only one or two envelope recipients.
+
+Arguments: none
+Returns: OK if there are no blind recipients
+ FAIL if there is at least one blind recipient
+*/
+
+int
+verify_check_notblind(void)
+{
+int i;
+for (i = 0; i < recipients_count; i++)
+ {
+ header_line *h;
+ BOOL found = FALSE;
+ uschar *address = recipients_list[i].address;
+
+ for (h = header_list; !found && h != NULL; h = h->next)
+ {
+ uschar *colon, *s;
+
+ if (h->type != htype_to && h->type != htype_cc) continue;
+
+ colon = Ustrchr(h->text, ':');
+ s = colon + 1;
+ while (isspace(*s)) s++;
+
+ /* Loop for multiple addresses in the header, enabling group syntax. Note
+ that we have to reset this after the header has been scanned. */
+
+ parse_allow_group = TRUE;
+
+ while (*s != 0)
+ {
+ uschar *ss = parse_find_address_end(s, FALSE);
+ uschar *recipient,*errmess;
+ int terminator = *ss;
+ int start, end, domain;
+
+ /* Temporarily terminate the string at this point, and extract the
+ operative address within, allowing group syntax. */
+
+ *ss = 0;
+ recipient = parse_extract_address(s,&errmess,&start,&end,&domain,FALSE);
+ *ss = terminator;
+
+ /* If we found a valid recipient that has a domain, compare it with the
+ envelope recipient. Local parts are compared case-sensitively, domains
+ case-insensitively. By comparing from the start with length "domain", we
+ include the "@" at the end, which ensures that we are comparing the whole
+ local part of each address. */
+
+ if (recipient != NULL && domain != 0)
+ {
+ found = Ustrncmp(recipient, address, domain) == 0 &&
+ strcmpic(recipient + domain, address + domain) == 0;
+ if (found) break;
+ }
+
+ /* Advance to the next address */
+
+ s = ss + (terminator? 1:0);
+ while (isspace(*s)) s++;
+ } /* Next address */
+
+ parse_allow_group = FALSE;
+ parse_found_group = FALSE;
+ } /* Next header (if found is false) */
+
+ if (!found) return FAIL;
+ } /* Next recipient */
+
+return OK;
+}
+
+
/*************************************************
* Find if verified sender *
log_msgptr points to where to put a log error message
callout timeout for callout check (passed to verify_address())
callout_overall overall callout timeout (ditto)
- callout_connect connect callout timeout (ditto)
+ callout_connect connect callout timeout (ditto)
se_mailfrom mailfrom for verify; NULL => ""
pm_mailfrom sender for pm callout check (passed to verify_address())
options callout options (passed to verify_address())
+ verrno where to put the address basic_errno
If log_msgptr is set to something without setting user_msgptr, the caller
normally uses log_msgptr for both things.
int
verify_check_header_address(uschar **user_msgptr, uschar **log_msgptr,
- int callout, int callout_overall, int callout_connect, uschar *se_mailfrom,
- uschar *pm_mailfrom, int options)
+ int callout, int callout_overall, int callout_connect, uschar *se_mailfrom,
+ uschar *pm_mailfrom, int options, int *verrno)
{
static int header_types[] = { htype_sender, htype_reply_to, htype_from };
+BOOL done = FALSE;
int yield = FAIL;
int i;
-for (i = 0; i < 3; i++)
+for (i = 0; i < 3 && !done; i++)
{
header_line *h;
- for (h = header_list; h != NULL; h = h->next)
+ for (h = header_list; h != NULL && !done; h = h->next)
{
int terminator, new_ok;
uschar *s, *ss, *endname;
if (h->type != header_types[i]) continue;
s = endname = Ustrchr(h->text, ':') + 1;
+ /* Scan the addresses in the header, enabling group syntax. Note that we
+ have to reset this after the header has been scanned. */
+
+ parse_allow_group = TRUE;
+
while (*s != 0)
{
address_item *vaddr;
else
{
int start, end, domain;
- uschar *address = parse_extract_address(s, log_msgptr, &start,
- &end, &domain, FALSE);
+ uschar *address = parse_extract_address(s, log_msgptr, &start, &end,
+ &domain, FALSE);
*ss = terminator;
+ /* If we found an empty address, just carry on with the next one, but
+ kill the message. */
+
+ if (address == NULL && Ustrcmp(*log_msgptr, "empty address") == 0)
+ {
+ *log_msgptr = NULL;
+ s = ss;
+ continue;
+ }
+
/* If verification failed because of a syntax error, fail this
function, and ensure that the failing address gets added to the error
message. */
if (address == NULL)
{
new_ok = FAIL;
- if (*log_msgptr != NULL)
- {
- while (ss > s && isspace(ss[-1])) ss--;
- *log_msgptr = string_sprintf("syntax error in '%.*s' header when "
- "scanning for sender: %s in \"%.*s\"",
- endname - h->text, h->text, *log_msgptr, ss - s, s);
- return FAIL;
- }
+ while (ss > s && isspace(ss[-1])) ss--;
+ *log_msgptr = string_sprintf("syntax error in '%.*s' header when "
+ "scanning for sender: %s in \"%.*s\"",
+ endname - h->text, h->text, *log_msgptr, ss - s, s);
+ yield = FAIL;
+ done = TRUE;
+ break;
}
- /* Else go ahead with the sender verification. But is isn't *the*
+ /* Else go ahead with the sender verification. But it isn't *the*
sender of the message, so set vopt_fake_sender to stop sender_address
being replaced after rewriting or qualification. */
{
vaddr = deliver_make_addr(address, FALSE);
new_ok = verify_address(vaddr, NULL, options | vopt_fake_sender,
- callout, callout_overall, callout_connect, se_mailfrom,
+ callout, callout_overall, callout_connect, se_mailfrom,
pm_mailfrom, NULL);
}
}
last of these will be returned to the user if all three fail. We do not
set a log message - the generic one below will be used. */
- if (new_ok != OK && smtp_return_error_details)
+ if (new_ok != OK)
{
- *user_msgptr = string_sprintf("Rejected after DATA: "
- "could not verify \"%.*s\" header address\n%s: %s",
- endname - h->text, h->text, vaddr->address, vaddr->message);
+ *verrno = vaddr->basic_errno;
+ if (smtp_return_error_details)
+ {
+ *user_msgptr = string_sprintf("Rejected after DATA: "
+ "could not verify \"%.*s\" header address\n%s: %s",
+ endname - h->text, h->text, vaddr->address, vaddr->message);
+ }
}
/* Success or defer */
- if (new_ok == OK) return OK;
+ if (new_ok == OK)
+ {
+ yield = OK;
+ done = TRUE;
+ break;
+ }
+
if (new_ok == DEFER) yield = DEFER;
/* Move on to any more addresses in the header */
s = ss;
- }
- }
- }
+ } /* Next address */
+
+ parse_allow_group = FALSE;
+ parse_found_group = FALSE;
+ } /* Next header, unless done */
+ } /* Next header type unless done */
if (yield == FAIL && *log_msgptr == NULL)
*log_msgptr = US"there is no valid sender in any header line";
DEBUG(D_ident) debug_printf("sender_ident = %s\n", sender_ident);
END_OFF:
-close(sock);
+(void)close(sock);
return;
}
error for error message when returning ERROR
The block contains:
- host_name the host name or NULL, implying use sender_host_name and
- sender_host_aliases, looking them up if required
+ host_name (a) the host name, or
+ (b) NULL, implying use sender_host_name and
+ sender_host_aliases, looking them up if required, or
+ (c) the empty string, meaning that only IP address matches
+ are permitted
host_address the host address
host_ipv4 the IPv4 address taken from an IPv6 one
Returns: OK matched
FAIL did not match
DEFER lookup deferred
- ERROR failed to find the host name or IP address
- unknown lookup type specified
+ ERROR (a) failed to find the host name or IP address, or
+ (b) unknown lookup type specified, or
+ (c) host name encountered when only IP addresses are
+ being matched
*/
-static int
+int
check_host(void *arg, uschar *ss, uschar **valueptr, uschar **error)
{
check_host_block *cb = (check_host_block *)arg;
+int mlen = -1;
int maskoffset;
+BOOL iplookup = FALSE;
BOOL isquery = FALSE;
-uschar *semicolon, *t;
+BOOL isiponly = cb->host_name != NULL && cb->host_name[0] == 0;
+uschar *t;
+uschar *semicolon;
uschar **aliases;
/* Optimize for the special case when the pattern is "*". */
if (cb->host_address[0] == 0) return (*ss == 0)? OK : FAIL;
if (*ss == 0) return FAIL;
-/* If the pattern is precisely "@" then match against the primary host name;
-if it's "@[]" match against the local host's IP addresses. */
+/* If the pattern is precisely "@" then match against the primary host name,
+provided that host name matching is permitted; if it's "@[]" match against the
+local host's IP addresses. */
if (*ss == '@')
{
- if (ss[1] == 0) ss = primary_hostname;
+ if (ss[1] == 0)
+ {
+ if (isiponly) return ERROR;
+ ss = primary_hostname;
+ }
else if (Ustrcmp(ss, "@[]") == 0)
{
ip_address_item *ip;
/* If the pattern is an IP address, optionally followed by a bitmask count, do
a (possibly masked) comparision with the current IP address. */
-if (string_is_ip_address(ss, &maskoffset))
+if (string_is_ip_address(ss, &maskoffset) != 0)
return (host_is_in_net(cb->host_address, ss, maskoffset)? OK : FAIL);
-/* If the item is of the form net[n]-lookup;<file|query> then it is a lookup on
-a masked IP network, in textual form. The net- stuff really only applies to
-single-key lookups where the key is implicit. For query-style lookups the key
-is specified in the query. From release 4.30, the use of net- for query style
-is no longer needed, but we retain it for backward compatibility. */
-
-if (Ustrncmp(ss, "net", 3) == 0 && (semicolon = Ustrchr(ss, ';')) != NULL)
+/* The pattern is not an IP address. A common error that people make is to omit
+one component of an IPv4 address, either by accident, or believing that, for
+example, 1.2.3/24 is the same as 1.2.3.0/24, or 1.2.3 is the same as 1.2.3.0,
+which it isn't. (Those applications that do accept 1.2.3 as an IP address
+interpret it as 1.2.0.3 because the final component becomes 16-bit - this is an
+ancient specification.) To aid in debugging these cases, we give a specific
+error if the pattern contains only digits and dots or contains a slash preceded
+only by digits and dots (a slash at the start indicates a file name and of
+course slashes may be present in lookups, but not preceded only by digits and
+dots). */
+
+for (t = ss; isdigit(*t) || *t == '.'; t++);
+if (*t == 0 || (*t == '/' && t != ss))
{
- int mlen = 0;
- for (t = ss + 3; isdigit(*t); t++) mlen = mlen * 10 + *t - '0';
- if (*t++ == '-')
- {
- int insize;
- int search_type;
- int incoming[4];
- void *handle;
- uschar *filename, *key, *result;
- uschar buffer[64];
+ *error = US"malformed IPv4 address or address mask";
+ return ERROR;
+ }
- /* If no mask was supplied, set a negative value */
+/* See if there is a semicolon in the pattern */
- if (mlen == 0 && t == ss+4) mlen = -1;
+semicolon = Ustrchr(ss, ';');
- /* Find the search type */
+/* If we are doing an IP address only match, then all lookups must be IP
+address lookups, even if there is no "net-". */
- search_type = search_findtype(t, semicolon - t);
+if (isiponly)
+ {
+ iplookup = semicolon != NULL;
+ }
- if (search_type < 0) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s",
- search_error_message);
+/* Otherwise, if the item is of the form net[n]-lookup;<file|query> then it is
+a lookup on a masked IP network, in textual form. We obey this code even if we
+have already set iplookup, so as to skip over the "net-" prefix and to set the
+mask length. The net- stuff really only applies to single-key lookups where the
+key is implicit. For query-style lookups the key is specified in the query.
+From release 4.30, the use of net- for query style is no longer needed, but we
+retain it for backward compatibility. */
- /* Adjust parameters for the type of lookup. For a query-style
- lookup, there is no file name, and the "key" is just the query. For
- a single-key lookup, the key is the current IP address, masked
- appropriately, and reconverted to text form, with the mask appended. */
+if (Ustrncmp(ss, "net", 3) == 0 && semicolon != NULL)
+ {
+ mlen = 0;
+ for (t = ss + 3; isdigit(*t); t++) mlen = mlen * 10 + *t - '0';
+ if (mlen == 0 && t == ss+3) mlen = -1; /* No mask supplied */
+ iplookup = (*t++ == '-');
+ }
+else t = ss;
- if (mac_islookup(search_type, lookup_querystyle))
- {
- filename = NULL;
- key = semicolon + 1;
- }
- else
- {
- insize = host_aton(cb->host_address, incoming);
- host_mask(insize, incoming, mlen);
- (void)host_nmtoa(insize, incoming, mlen, buffer);
- key = buffer;
- filename = semicolon + 1;
- }
+/* Do the IP address lookup if that is indeed what we have */
- /* Now do the actual lookup; note that there is no search_close() because
- of the caching arrangements. */
+if (iplookup)
+ {
+ int insize;
+ int search_type;
+ int incoming[4];
+ void *handle;
+ uschar *filename, *key, *result;
+ uschar buffer[64];
+
+ /* Find the search type */
+
+ search_type = search_findtype(t, semicolon - t);
+
+ if (search_type < 0) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s",
+ search_error_message);
+
+ /* Adjust parameters for the type of lookup. For a query-style lookup, there
+ is no file name, and the "key" is just the query. For query-style with a file
+ name, we have to fish the file off the start of the query. For a single-key
+ lookup, the key is the current IP address, masked appropriately, and
+ reconverted to text form, with the mask appended. For IPv6 addresses, specify
+ dot separators instead of colons, except when the lookup type is "iplsearch".
+ */
- handle = search_open(filename, search_type, 0, NULL, NULL);
- if (handle == NULL) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s",
- search_error_message);
- result = search_find(handle, filename, key, -1, NULL, 0, 0, NULL);
- if (valueptr != NULL) *valueptr = result;
- return (result != NULL)? OK : search_find_defer? DEFER: FAIL;
+ if (mac_islookup(search_type, lookup_absfilequery))
+ {
+ filename = semicolon + 1;
+ key = filename;
+ while (*key != 0 && !isspace(*key)) key++;
+ filename = string_copyn(filename, key - filename);
+ while (isspace(*key)) key++;
+ }
+ else if (mac_islookup(search_type, lookup_querystyle))
+ {
+ filename = NULL;
+ key = semicolon + 1;
+ }
+ else /* Single-key style */
+ {
+ int sep = (Ustrcmp(lookup_list[search_type]->name, "iplsearch") == 0)?
+ ':' : '.';
+ insize = host_aton(cb->host_address, incoming);
+ host_mask(insize, incoming, mlen);
+ (void)host_nmtoa(insize, incoming, mlen, buffer, sep);
+ key = buffer;
+ filename = semicolon + 1;
}
+
+ /* Now do the actual lookup; note that there is no search_close() because
+ of the caching arrangements. */
+
+ handle = search_open(filename, search_type, 0, NULL, NULL);
+ if (handle == NULL) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s",
+ search_error_message);
+ result = search_find(handle, filename, key, -1, NULL, 0, 0, NULL);
+ if (valueptr != NULL) *valueptr = result;
+ return (result != NULL)? OK : search_find_defer? DEFER: FAIL;
}
/* The pattern is not an IP address or network reference of any kind. That is,
-it is a host name pattern. Check the characters of the pattern to see if they
-comprise only letters, digits, full stops, and hyphens (the constituents of
-domain names). Allow underscores, as they are all too commonly found. Sigh.
-Also, if allow_utf8_domains is set, allow top-bit characters. */
+it is a host name pattern. If this is an IP only match, there's an error in the
+host list. */
+
+if (isiponly)
+ {
+ *error = US"cannot match host name in match_ip list";
+ return ERROR;
+ }
+
+/* Check the characters of the pattern to see if they comprise only letters,
+digits, full stops, and hyphens (the constituents of domain names). Allow
+underscores, as they are all too commonly found. Sigh. Also, if
+allow_utf8_domains is set, allow top-bit characters. */
for (t = ss; *t != 0; t++)
if (!isalnum(*t) && *t != '.' && *t != '-' && *t != '_' &&
h.name = ss;
h.address = NULL;
h.mx = MX_NONE;
- rc = host_find_byname(&h, NULL, NULL, FALSE);
+
+ rc = host_find_byname(&h, NULL, HOST_FIND_QUALIFY_SINGLE, NULL, FALSE);
if (rc == HOST_FOUND || rc == HOST_FOUND_LOCAL)
{
host_item *hh;
for (hh = &h; hh != NULL; hh = hh->next)
{
- if (Ustrcmp(hh->address, (Ustrchr(hh->address, ':') == NULL)?
- cb->host_ipv4 : cb->host_address) == 0)
- return OK;
+ if (host_is_in_net(hh->address, cb->host_address, 0)) return OK;
}
return FAIL;
}
search_error_message, ss);
return DEFER;
}
- isquery = mac_islookup(id, lookup_querystyle);
+ isquery = mac_islookup(id, lookup_querystyle|lookup_absfilequery);
}
if (isquery)
verify_check_this_host(uschar **listptr, unsigned int *cache_bits,
uschar *host_name, uschar *host_address, uschar **valueptr)
{
+int rc;
unsigned int *local_cache_bits = cache_bits;
+uschar *save_host_address = deliver_host_address;
check_host_block cb;
cb.host_name = host_name;
cb.host_address = host_address;
cb.host_ipv4 = (Ustrncmp(host_address, "::ffff:", 7) == 0)?
host_address + 7 : host_address;
-return match_check_list(listptr, 0, &hostlist_anchor, &local_cache_bits,
- check_host, &cb, MCL_HOST,
- (host_address == sender_host_address)? US"host" : host_address, valueptr);
+/* During the running of the check, put the IP address into $host_address. In
+the case of calls from the smtp transport, it will already be there. However,
+in other calls (e.g. when testing ignore_target_hosts), it won't. Just to be on
+the safe side, any existing setting is preserved, though as I write this
+(November 2004) I can't see any cases where it is actually needed. */
+
+deliver_host_address = host_address;
+rc = match_check_list(
+ listptr, /* the list */
+ 0, /* separator character */
+ &hostlist_anchor, /* anchor pointer */
+ &local_cache_bits, /* cache pointer */
+ check_host, /* function for testing */
+ &cb, /* argument for function */
+ MCL_HOST, /* type of check */
+ (host_address == sender_host_address)?
+ US"host" : host_address, /* text for debugging */
+ valueptr); /* where to pass back data */
+deliver_host_address = save_host_address;
+return rc;
}
/*************************************************
-* Invert an IP address for a DNS black list *
+* Invert an IP address *
*************************************************/
-/*
+/* Originally just used for DNS xBL lists, now also used for the
+reverse_ip expansion operator.
+
Arguments:
buffer where to put the answer
address the address to invert
*/
-static void
+void
invert_address(uschar *buffer, uschar *address)
{
int bin[4];
}
}
#endif
+
+/* Remove trailing period -- this is needed so that both arbitrary
+dnsbl keydomains and inverted addresses may be combined with the
+same format string, "%s.%s" */
+
+*(--bptr) = 0;
+}
+
+
+
+/*************************************************
+* Perform a single dnsbl lookup *
+*************************************************/
+
+/* This function is called from verify_check_dnsbl() below. It is also called
+recursively from within itself when domain and domain_txt are different
+pointers, in order to get the TXT record from the alternate domain.
+
+Arguments:
+ domain the outer dnsbl domain
+ domain_txt alternate domain to lookup TXT record on success; when the
+ same domain is to be used, domain_txt == domain (that is,
+ the pointers must be identical, not just the text)
+ keydomain the current keydomain (for debug message)
+ prepend subdomain to lookup (like keydomain, but
+ reversed if IP address)
+ iplist the list of matching IP addresses, or NULL for "any"
+ bitmask true if bitmask matching is wanted
+ match_type condition for 'succeed' result
+ 0 => Any RR in iplist (=)
+ 1 => No RR in iplist (!=)
+ 2 => All RRs in iplist (==)
+ 3 => Some RRs not in iplist (!==)
+ the two bits are defined as MT_NOT and MT_ALL
+ defer_return what to return for a defer
+
+Returns: OK if lookup succeeded
+ FAIL if not
+*/
+
+static int
+one_check_dnsbl(uschar *domain, uschar *domain_txt, uschar *keydomain,
+ uschar *prepend, uschar *iplist, BOOL bitmask, int match_type,
+ int defer_return)
+{
+dns_answer dnsa;
+dns_scan dnss;
+tree_node *t;
+dnsbl_cache_block *cb;
+int old_pool = store_pool;
+uschar query[256]; /* DNS domain max length */
+
+/* Construct the specific query domainname */
+
+if (!string_format(query, sizeof(query), "%s.%s", prepend, domain))
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "dnslist query is too long "
+ "(ignored): %s...", query);
+ return FAIL;
+ }
+
+/* Look for this query in the cache. */
+
+t = tree_search(dnsbl_cache, query);
+
+/* If not cached from a previous lookup, we must do a DNS lookup, and
+cache the result in permanent memory. */
+
+if (t == NULL)
+ {
+ store_pool = POOL_PERM;
+
+ /* Set up a tree entry to cache the lookup */
+
+ t = store_get(sizeof(tree_node) + Ustrlen(query));
+ Ustrcpy(t->name, query);
+ t->data.ptr = cb = store_get(sizeof(dnsbl_cache_block));
+ (void)tree_insertnode(&dnsbl_cache, t);
+
+ /* Do the DNS loopup . */
+
+ HDEBUG(D_dnsbl) debug_printf("new DNS lookup for %s\n", query);
+ cb->rc = dns_basic_lookup(&dnsa, query, T_A);
+ cb->text_set = FALSE;
+ cb->text = NULL;
+ cb->rhs = NULL;
+
+ /* If the lookup succeeded, cache the RHS address. The code allows for
+ more than one address - this was for complete generality and the possible
+ use of A6 records. However, A6 records have been reduced to experimental
+ status (August 2001) and may die out. So they may never get used at all,
+ let alone in dnsbl records. However, leave the code here, just in case.
+
+ Quite apart from one A6 RR generating multiple addresses, there are DNS
+ lists that return more than one A record, so we must handle multiple
+ addresses generated in that way as well. */
+
+ if (cb->rc == DNS_SUCCEED)
+ {
+ dns_record *rr;
+ dns_address **addrp = &(cb->rhs);
+ for (rr = dns_next_rr(&dnsa, &dnss, RESET_ANSWERS);
+ rr != NULL;
+ rr = dns_next_rr(&dnsa, &dnss, RESET_NEXT))
+ {
+ if (rr->type == T_A)
+ {
+ dns_address *da = dns_address_from_rr(&dnsa, rr);
+ if (da != NULL)
+ {
+ *addrp = da;
+ while (da->next != NULL) da = da->next;
+ addrp = &(da->next);
+ }
+ }
+ }
+
+ /* If we didn't find any A records, change the return code. This can
+ happen when there is a CNAME record but there are no A records for what
+ it points to. */
+
+ if (cb->rhs == NULL) cb->rc = DNS_NODATA;
+ }
+
+ store_pool = old_pool;
+ }
+
+/* Previous lookup was cached */
+
+else
+ {
+ HDEBUG(D_dnsbl) debug_printf("using result of previous DNS lookup\n");
+ cb = t->data.ptr;
+ }
+
+/* We now have the result of the DNS lookup, either newly done, or cached
+from a previous call. If the lookup succeeded, check against the address
+list if there is one. This may be a positive equality list (introduced by
+"="), a negative equality list (introduced by "!="), a positive bitmask
+list (introduced by "&"), or a negative bitmask list (introduced by "!&").*/
+
+if (cb->rc == DNS_SUCCEED)
+ {
+ dns_address *da = NULL;
+ uschar *addlist = cb->rhs->address;
+
+ /* For A and AAAA records, there may be multiple addresses from multiple
+ records. For A6 records (currently not expected to be used) there may be
+ multiple addresses from a single record. */
+
+ for (da = cb->rhs->next; da != NULL; da = da->next)
+ addlist = string_sprintf("%s, %s", addlist, da->address);
+
+ HDEBUG(D_dnsbl) debug_printf("DNS lookup for %s succeeded (yielding %s)\n",
+ query, addlist);
+
+ /* Address list check; this can be either for equality, or via a bitmask.
+ In the latter case, all the bits must match. */
+
+ if (iplist != NULL)
+ {
+ for (da = cb->rhs; da != NULL; da = da->next)
+ {
+ int ipsep = ',';
+ uschar ip[46];
+ uschar *ptr = iplist;
+ uschar *res;
+
+ /* Handle exact matching */
+
+ if (!bitmask)
+ {
+ while ((res = string_nextinlist(&ptr, &ipsep, ip, sizeof(ip))) != NULL)
+ {
+ if (Ustrcmp(CS da->address, ip) == 0) break;
+ }
+ }
+
+ /* Handle bitmask matching */
+
+ else
+ {
+ int address[4];
+ int mask = 0;
+
+ /* At present, all known DNS blocking lists use A records, with
+ IPv4 addresses on the RHS encoding the information they return. I
+ wonder if this will linger on as the last vestige of IPv4 when IPv6
+ is ubiquitous? Anyway, for now we use paranoia code to completely
+ ignore IPv6 addresses. The default mask is 0, which always matches.
+ We change this only for IPv4 addresses in the list. */
+
+ if (host_aton(da->address, address) == 1) mask = address[0];
+
+ /* Scan the returned addresses, skipping any that are IPv6 */
+
+ while ((res = string_nextinlist(&ptr, &ipsep, ip, sizeof(ip))) != NULL)
+ {
+ if (host_aton(ip, address) != 1) continue;
+ if ((address[0] & mask) == address[0]) break;
+ }
+ }
+
+ /* If either
+
+ (a) An IP address in an any ('=') list matched, or
+ (b) No IP address in an all ('==') list matched
+
+ then we're done searching. */
+
+ if (((match_type & MT_ALL) != 0) == (res == NULL)) break;
+ }
+
+ /* If da == NULL, either
+
+ (a) No IP address in an any ('=') list matched, or
+ (b) An IP address in an all ('==') list didn't match
+
+ so behave as if the DNSBL lookup had not succeeded, i.e. the host is not on
+ the list. */
+
+ if ((match_type == MT_NOT || match_type == MT_ALL) != (da == NULL))
+ {
+ HDEBUG(D_dnsbl)
+ {
+ uschar *res = NULL;
+ switch(match_type)
+ {
+ case 0:
+ res = US"was no match";
+ break;
+ case MT_NOT:
+ res = US"was an exclude match";
+ break;
+ case MT_ALL:
+ res = US"was an IP address that did not match";
+ break;
+ case MT_NOT|MT_ALL:
+ res = US"were no IP addresses that did not match";
+ break;
+ }
+ debug_printf("=> but we are not accepting this block class because\n");
+ debug_printf("=> there %s for %s%c%s\n",
+ res,
+ ((match_type & MT_ALL) == 0)? "" : "=",
+ bitmask? '&' : '=', iplist);
+ }
+ return FAIL;
+ }
+ }
+
+ /* Either there was no IP list, or the record matched, implying that the
+ domain is on the list. We now want to find a corresponding TXT record. If an
+ alternate domain is specified for the TXT record, call this function
+ recursively to look that up; this has the side effect of re-checking that
+ there is indeed an A record at the alternate domain. */
+
+ if (domain_txt != domain)
+ return one_check_dnsbl(domain_txt, domain_txt, keydomain, prepend, NULL,
+ FALSE, match_type, defer_return);
+
+ /* If there is no alternate domain, look up a TXT record in the main domain
+ if it has not previously been cached. */
+
+ if (!cb->text_set)
+ {
+ cb->text_set = TRUE;
+ if (dns_basic_lookup(&dnsa, query, T_TXT) == DNS_SUCCEED)
+ {
+ dns_record *rr;
+ for (rr = dns_next_rr(&dnsa, &dnss, RESET_ANSWERS);
+ rr != NULL;
+ rr = dns_next_rr(&dnsa, &dnss, RESET_NEXT))
+ if (rr->type == T_TXT) break;
+ if (rr != NULL)
+ {
+ int len = (rr->data)[0];
+ if (len > 511) len = 127;
+ store_pool = POOL_PERM;
+ cb->text = string_sprintf("%.*s", len, (const uschar *)(rr->data+1));
+ store_pool = old_pool;
+ }
+ }
+ }
+
+ dnslist_value = addlist;
+ dnslist_text = cb->text;
+ return OK;
+ }
+
+/* There was a problem with the DNS lookup */
+
+if (cb->rc != DNS_NOMATCH && cb->rc != DNS_NODATA)
+ {
+ log_write(L_dnslist_defer, LOG_MAIN,
+ "DNS list lookup defer (probably timeout) for %s: %s", query,
+ (defer_return == OK)? US"assumed in list" :
+ (defer_return == FAIL)? US"assumed not in list" :
+ US"returned DEFER");
+ return defer_return;
+ }
+
+/* No entry was found in the DNS; continue for next domain */
+
+HDEBUG(D_dnsbl)
+ {
+ debug_printf("DNS lookup for %s failed\n", query);
+ debug_printf("=> that means %s is not listed at %s\n",
+ keydomain, domain);
+ }
+
+return FAIL;
}
+
/*************************************************
* Check host against DNS black lists *
*************************************************/
If no key is given, what is looked up in the domain is the inverted IP address
of the current client host. If a key is given, it is used to construct the
-domain for the lookup. For example,
+domain for the lookup. For example:
dsn.rfc-ignorant.org/$sender_address_domain
value in $dnslist_text. We also cache everything in a tree, to optimize
multiple lookups.
+The TXT record is normally looked up in the same domain as the A record, but
+when many lists are combined in a single DNS domain, this will not be a very
+specific message. It is possible to specify a different domain for looking up
+TXT records; this is given before the main domain, comma-separated. For
+example:
+
+ dnslists = http.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.2 : \
+ socks.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.3
+
+The caching ensures that only one lookup in dnsbl.sorbs.net is done.
+
Note: an address for testing RBL is 192.203.178.39
Note: an address for testing DUL is 192.203.178.4
Note: a domain for testing RFCI is example.tld.dsn.rfc-ignorant.org
{
int sep = 0;
int defer_return = FAIL;
-int old_pool = store_pool;
-BOOL invert_result = FALSE;
uschar *list = *listptr;
uschar *domain;
uschar *s;
uschar buffer[1024];
-uschar query[256]; /* DNS domain max length */
uschar revadd[128]; /* Long enough for IPv6 address */
/* Indicate that the inverted IP address is not yet set up */
revadd[0] = 0;
+/* In case this is the first time the DNS resolver is being used. */
+
+dns_init(FALSE, FALSE);
+
/* Loop through all the domains supplied, until something matches */
while ((domain = string_nextinlist(&list, &sep, buffer, sizeof(buffer))) != NULL)
{
- BOOL frc;
+ int rc;
BOOL bitmask = FALSE;
- dns_answer dnsa;
- dns_scan dnss;
+ int match_type = 0;
+ uschar *domain_txt;
+ uschar *comma;
uschar *iplist;
uschar *key;
- tree_node *t;
- dnsbl_cache_block *cb;
HDEBUG(D_dnsbl) debug_printf("DNS list check: %s\n", domain);
if (key != NULL) *key++ = 0;
/* See if there's a list of addresses supplied after the domain name. This is
- introduced by an = or a & character; if preceded by ! we invert the result.
- */
+ introduced by an = or a & character; if preceded by = we require all matches
+ and if preceded by ! we invert the result. */
iplist = Ustrchr(domain, '=');
if (iplist == NULL)
iplist = Ustrchr(domain, '&');
}
- if (iplist != NULL)
+ if (iplist != NULL) /* Found either = or & */
{
- if (iplist > domain && iplist[-1] == '!')
+ if (iplist > domain && iplist[-1] == '!') /* Handle preceding ! */
{
- invert_result = TRUE;
+ match_type |= MT_NOT;
iplist[-1] = 0;
}
- *iplist++ = 0;
+
+ *iplist++ = 0; /* Terminate domain, move on */
+
+ /* If we found = (bitmask == FALSE), check for == or =& */
+
+ if (!bitmask && (*iplist == '=' || *iplist == '&'))
+ {
+ bitmask = *iplist++ == '&';
+ match_type |= MT_ALL;
+ }
+ }
+
+ /* If there is a comma in the domain, it indicates that a second domain for
+ looking up TXT records is provided, before the main domain. Otherwise we must
+ set domain_txt == domain. */
+
+ domain_txt = domain;
+ comma = Ustrchr(domain, ',');
+ if (comma != NULL)
+ {
+ *comma++ = 0;
+ domain = comma;
}
/* Check that what we have left is a sensible domain name. There is no reason
for (s = domain; *s != 0; s++)
{
- if (!isalnum(*s) && *s != '-' && *s != '.')
+ if (!isalnum(*s) && *s != '-' && *s != '.' && *s != '_')
{
log_write(0, LOG_MAIN, "dnslists domain \"%s\" contains "
"strange characters - is this right?", domain);
}
}
- /* Construct the query by adding the domain onto either the sending host
- address, or the given key string. */
-
- if (key == NULL)
- {
- if (sender_host_address == NULL) return FAIL; /* can never match */
- if (revadd[0] == 0) invert_address(revadd, sender_host_address);
- frc = string_format(query, sizeof(query), "%s%s", revadd, domain);
- }
- else
- {
- frc = string_format(query, sizeof(query), "%s.%s", key, domain);
- }
+ /* Check the alternate domain if present */
- if (!frc)
+ if (domain_txt != domain) for (s = domain_txt; *s != 0; s++)
{
- log_write(0, LOG_MAIN|LOG_PANIC, "dnslist query is too long "
- "(ignored): %s...", query);
- continue;
+ if (!isalnum(*s) && *s != '-' && *s != '.' && *s != '_')
+ {
+ log_write(0, LOG_MAIN, "dnslists domain \"%s\" contains "
+ "strange characters - is this right?", domain_txt);
+ break;
+ }
}
- /* Look for this query in the cache. */
+ /* If there is no key string, construct the query by adding the domain name
+ onto the inverted host address, and perform a single DNS lookup. */
- t = tree_search(dnsbl_cache, query);
-
- /* If not cached from a previous lookup, we must do a DNS lookup, and
- cache the result in permanent memory. */
-
- if (t == NULL)
+ if (key == NULL)
{
- store_pool = POOL_PERM;
-
- /* In case this is the first time the DNS resolver is being used. */
-
- dns_init(FALSE, FALSE);
-
- /* Set up a tree entry to cache the lookup */
-
- t = store_get(sizeof(tree_node) + Ustrlen(query));
- Ustrcpy(t->name, query);
- t->data.ptr = cb = store_get(sizeof(dnsbl_cache_block));
- (void)tree_insertnode(&dnsbl_cache, t);
-
- /* Do the DNS loopup . */
-
- HDEBUG(D_dnsbl) debug_printf("new DNS lookup for %s\n", query);
- cb->rc = dns_basic_lookup(&dnsa, query, T_A);
- cb->text_set = FALSE;
- cb->text = NULL;
- cb->rhs = NULL;
-
- /* If the lookup succeeded, cache the RHS address. The code allows for
- more than one address - this was for complete generality and the possible
- use of A6 records. However, A6 records have been reduced to experimental
- status (August 2001) and may die out. So they may never get used at all,
- let alone in dnsbl records. However, leave the code here, just in case.
-
- Quite apart from one A6 RR generating multiple addresses, there are DNS
- lists that return more than one A record, so we must handle multiple
- addresses generated in that way as well. */
-
- if (cb->rc == DNS_SUCCEED)
+ if (sender_host_address == NULL) return FAIL; /* can never match */
+ if (revadd[0] == 0) invert_address(revadd, sender_host_address);
+ rc = one_check_dnsbl(domain, domain_txt, sender_host_address, revadd,
+ iplist, bitmask, match_type, defer_return);
+ if (rc == OK)
{
- dns_record *rr;
- dns_address **addrp = &(cb->rhs);
- for (rr = dns_next_rr(&dnsa, &dnss, RESET_ANSWERS);
- rr != NULL;
- rr = dns_next_rr(&dnsa, &dnss, RESET_NEXT))
- {
- if (rr->type == T_A)
- {
- dns_address *da = dns_address_from_rr(&dnsa, rr);
- if (da != NULL)
- {
- *addrp = da;
- while (da->next != NULL) da = da->next;
- addrp = &(da->next);
- }
- }
- }
-
- /* If we didn't find any A records, change the return code. This can
- happen when there is a CNAME record but there are no A records for what
- it points to. */
-
- if (cb->rhs == NULL) cb->rc = DNS_NODATA;
+ dnslist_domain = string_copy(domain_txt);
+ dnslist_matched = string_copy(sender_host_address);
+ HDEBUG(D_dnsbl) debug_printf("=> that means %s is listed at %s\n",
+ sender_host_address, dnslist_domain);
}
-
- store_pool = old_pool;
+ if (rc != FAIL) return rc; /* OK or DEFER */
}
- /* Previous lookup was cached */
+ /* If there is a key string, it can be a list of domains or IP addresses to
+ be concatenated with the main domain. */
else
{
- HDEBUG(D_dnsbl) debug_printf("using result of previous DNS lookup\n");
- cb = t->data.ptr;
- }
-
- /* We now have the result of the DNS lookup, either newly done, or cached
- from a previous call. If the lookup succeeded, check against the address
- list if there is one. This may be a positive equality list (introduced by
- "="), a negative equality list (introduced by "!="), a positive bitmask
- list (introduced by "&"), or a negative bitmask list (introduced by "!&").*/
-
- if (cb->rc == DNS_SUCCEED)
- {
- dns_address *da = NULL;
- uschar *addlist = cb->rhs->address;
-
- /* For A and AAAA records, there may be multiple addresses from multiple
- records. For A6 records (currently not expected to be used) there may be
- multiple addresses from a single record. */
-
- for (da = cb->rhs->next; da != NULL; da = da->next)
- addlist = string_sprintf("%s, %s", addlist, da->address);
-
- HDEBUG(D_dnsbl) debug_printf("DNS lookup for %s succeeded (yielding %s)\n",
- query, addlist);
-
- /* Address list check; this can be either for equality, or via a bitmask.
- In the latter case, all the bits must match. */
-
- if (iplist != NULL)
+ int keysep = 0;
+ BOOL defer = FALSE;
+ uschar *keydomain;
+ uschar keybuffer[256];
+ uschar keyrevadd[128];
+
+ while ((keydomain = string_nextinlist(&key, &keysep, keybuffer,
+ sizeof(keybuffer))) != NULL)
{
- int ipsep = ',';
- uschar ip[46];
- uschar *ptr = iplist;
+ uschar *prepend = keydomain;
- while (string_nextinlist(&ptr, &ipsep, ip, sizeof(ip)) != NULL)
+ if (string_is_ip_address(keydomain, NULL) != 0)
{
- /* Handle exact matching */
- if (!bitmask)
- {
- for (da = cb->rhs; da != NULL; da = da->next)
- {
- if (Ustrcmp(CS da->address, ip) == 0) break;
- }
- }
- /* Handle bitmask matching */
- else
- {
- int address[4];
- int mask = 0;
-
- /* At present, all known DNS blocking lists use A records, with
- IPv4 addresses on the RHS encoding the information they return. I
- wonder if this will linger on as the last vestige of IPv4 when IPv6
- is ubiquitous? Anyway, for now we use paranoia code to completely
- ignore IPv6 addresses. The default mask is 0, which always matches.
- We change this only for IPv4 addresses in the list. */
-
- if (host_aton(ip, address) == 1) mask = address[0];
-
- /* Scan the returned addresses, skipping any that are IPv6 */
-
- for (da = cb->rhs; da != NULL; da = da->next)
- {
- if (host_aton(da->address, address) != 1) continue;
- if ((address[0] & mask) == mask) break;
- }
- }
-
- /* Break out if a match has been found */
-
- if (da != NULL) break;
+ invert_address(keyrevadd, keydomain);
+ prepend = keyrevadd;
}
- /* If either
-
- (a) No IP address in a positive list matched, or
- (b) An IP address in a negative list did match
-
- then behave as if the DNSBL lookup had not succeeded, i.e. the host is
- not on the list. */
+ rc = one_check_dnsbl(domain, domain_txt, keydomain, prepend, iplist,
+ bitmask, match_type, defer_return);
- if (invert_result != (da == NULL))
+ if (rc == OK)
{
- HDEBUG(D_dnsbl)
- {
- debug_printf("=> but we are not accepting this block class because\n");
- debug_printf("=> there was %s match for %c%s\n",
- invert_result? "an exclude":"no", bitmask? '&' : '=', iplist);
- }
- continue; /* With next DNSBL domain */
+ dnslist_domain = string_copy(domain_txt);
+ dnslist_matched = string_copy(keydomain);
+ HDEBUG(D_dnsbl) debug_printf("=> that means %s is listed at %s\n",
+ keydomain, dnslist_domain);
+ return OK;
}
- }
- /* Either there was no IP list, or the record matched. Look up a TXT record
- if it hasn't previously been done. */
+ /* If the lookup deferred, remember this fact. We keep trying the rest
+ of the list to see if we get a useful result, and if we don't, we return
+ DEFER at the end. */
- if (!cb->text_set)
- {
- cb->text_set = TRUE;
- if (dns_basic_lookup(&dnsa, query, T_TXT) == DNS_SUCCEED)
- {
- dns_record *rr;
- for (rr = dns_next_rr(&dnsa, &dnss, RESET_ANSWERS);
- rr != NULL;
- rr = dns_next_rr(&dnsa, &dnss, RESET_NEXT))
- if (rr->type == T_TXT) break;
- if (rr != NULL)
- {
- int len = (rr->data)[0];
- if (len > 511) len = 127;
- store_pool = POOL_PERM;
- cb->text = string_sprintf("%.*s", len, (const uschar *)(rr->data+1));
- store_pool = old_pool;
- }
- }
- }
+ if (rc == DEFER) defer = TRUE;
+ } /* continue with next keystring domain/address */
- HDEBUG(D_dnsbl)
- {
- debug_printf("=> that means %s is listed at %s\n",
- (key == NULL)? sender_host_address : key, domain);
- }
-
- dnslist_domain = string_copy(domain);
- dnslist_value = addlist;
- dnslist_text = cb->text;
- return OK;
- }
-
- /* There was a problem with the DNS lookup */
-
- if (cb->rc != DNS_NOMATCH && cb->rc != DNS_NODATA)
- {
- log_write(L_dnslist_defer, LOG_MAIN,
- "DNS list lookup defer (probably timeout) for %s: %s", query,
- (defer_return == OK)? US"assumed in list" :
- (defer_return == FAIL)? US"assumed not in list" :
- US"returned DEFER");
- return defer_return;
- }
-
- /* No entry was found in the DNS; continue for next domain */
-
- HDEBUG(D_dnsbl)
- {
- debug_printf("DNS lookup for %s failed\n", query);
- debug_printf("=> that means %s is not listed at %s\n",
- (key == NULL)? sender_host_address : key, domain);
+ if (defer) return DEFER;
}
- } /* Continue with next domain */
+ } /* continue with next dnsdb outer domain */
return FAIL;
}
projects / exim.git / blobdiff