* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2017 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
#include "../exim.h"
(void *)offsetof(smtp_transport_options_block, address_retry_include_sender) },
{ "allow_localhost", opt_bool,
(void *)offsetof(smtp_transport_options_block, allow_localhost) },
+#ifdef EXPERIMENTAL_ARC
+ { "arc_sign", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, arc_sign) },
+#endif
{ "authenticated_sender", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, authenticated_sender) },
{ "authenticated_sender_force", opt_bool,
(void *)offsetof(smtp_transport_options_block, connect_timeout) },
{ "connection_max_messages", opt_int | opt_public,
(void *)offsetof(transport_instance, connection_max_messages) },
+# ifdef SUPPORT_DANE
+ { "dane_require_tls_ciphers", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dane_require_tls_ciphers) },
+# endif
{ "data_timeout", opt_time,
(void *)offsetof(smtp_transport_options_block, data_timeout) },
{ "delay_after_cutoff", opt_bool,
(void *)offsetof(smtp_transport_options_block, dkim.dkim_canon) },
{ "dkim_domain", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, dkim.dkim_domain) },
+ { "dkim_hash", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_hash) },
+ { "dkim_identity", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_identity) },
{ "dkim_private_key", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, dkim.dkim_private_key) },
{ "dkim_selector", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, dkim.dkim_sign_headers) },
{ "dkim_strict", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, dkim.dkim_strict) },
+ { "dkim_timestamps", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_timestamps) },
#endif
{ "dns_qualify_single", opt_bool,
(void *)offsetof(smtp_transport_options_block, dns_qualify_single) },
#endif
{ "hosts_override", opt_bool,
(void *)offsetof(smtp_transport_options_block, hosts_override) },
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ { "hosts_pipe_connect", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_pipe_connect) },
+#endif
{ "hosts_randomize", opt_bool,
(void *)offsetof(smtp_transport_options_block, hosts_randomize) },
#if defined(SUPPORT_TLS) && !defined(DISABLE_OCSP)
{ "hosts_require_auth", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_require_auth) },
#ifdef SUPPORT_TLS
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
{ "hosts_require_dane", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_require_dane) },
# endif
(void *)offsetof(smtp_transport_options_block, hosts_try_auth) },
{ "hosts_try_chunking", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_try_chunking) },
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE)
{ "hosts_try_dane", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_try_dane) },
#endif
{ "serialize_hosts", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, serialize_hosts) },
{ "size_addition", opt_int,
- (void *)offsetof(smtp_transport_options_block, size_addition) }
+ (void *)offsetof(smtp_transport_options_block, size_addition) },
#ifdef SUPPORT_SOCKS
- ,{ "socks_proxy", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, socks_proxy) }
+ { "socks_proxy", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, socks_proxy) },
#endif
#ifdef SUPPORT_TLS
- ,{ "tls_certificate", opt_stringptr,
+ { "tls_certificate", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, tls_certificate) },
{ "tls_crl", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, tls_crl) },
{ "tls_verify_certificates", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, tls_verify_certificates) },
{ "tls_verify_hosts", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_verify_hosts) }
+ (void *)offsetof(smtp_transport_options_block, tls_verify_hosts) },
+#endif
+#ifdef SUPPORT_I18N
+ { "utf8_downconvert", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, utf8_downconvert) },
#endif
};
/* Size of the options list. An extern variable has to be used so that its
address can appear in the tables drtables.c. */
-int smtp_transport_options_count =
- sizeof(smtp_transport_options)/sizeof(optionlist);
+int smtp_transport_options_count = nelem(smtp_transport_options);
+
+
+#ifdef MACRO_PREDEF
+
+/* Dummy values */
+smtp_transport_options_block smtp_transport_option_defaults = {0};
+void smtp_transport_init(transport_instance *tblock) {}
+BOOL smtp_transport_entry(transport_instance *tblock, address_item *addr) {return FALSE;}
+void smtp_transport_closedown(transport_instance *tblock) {}
+
+#else /*!MACRO_PREDEF*/
+
/* Default private options block for the smtp transport. */
smtp_transport_options_block smtp_transport_option_defaults = {
- NULL, /* hosts */
- NULL, /* fallback_hosts */
- NULL, /* hostlist */
- NULL, /* fallback_hostlist */
- NULL, /* authenticated_sender */
- US"$primary_hostname", /* helo_data */
- NULL, /* interface */
- NULL, /* port */
- US"smtp", /* protocol */
- NULL, /* DSCP */
- NULL, /* serialize_hosts */
- NULL, /* hosts_try_auth */
- NULL, /* hosts_require_auth */
- US"*", /* hosts_try_chunking */
-#ifdef EXPERIMENTAL_DANE
- NULL, /* hosts_try_dane */
- NULL, /* hosts_require_dane */
+ .hosts = NULL,
+ .fallback_hosts = NULL,
+ .hostlist = NULL,
+ .fallback_hostlist = NULL,
+ .helo_data = US"$primary_hostname",
+ .interface = NULL,
+ .port = NULL,
+ .protocol = US"smtp",
+ .dscp = NULL,
+ .serialize_hosts = NULL,
+ .hosts_try_auth = NULL,
+ .hosts_require_auth = NULL,
+ .hosts_try_chunking = US"*",
+#ifdef SUPPORT_DANE
+ .hosts_try_dane = NULL,
+ .hosts_require_dane = NULL,
+ .dane_require_tls_ciphers = NULL,
#endif
- NULL, /* hosts_try_fastopen */
+ .hosts_try_fastopen = NULL,
#ifndef DISABLE_PRDR
- US"*", /* hosts_try_prdr */
+ .hosts_try_prdr = US"*",
#endif
#ifndef DISABLE_OCSP
- US"*", /* hosts_request_ocsp (except under DANE; tls_client_start()) */
- NULL, /* hosts_require_ocsp */
+ .hosts_request_ocsp = US"*", /* hosts_request_ocsp (except under DANE; tls_client_start()) */
+ .hosts_require_ocsp = NULL,
+#endif
+ .hosts_require_tls = NULL,
+ .hosts_avoid_tls = NULL,
+ .hosts_verify_avoid_tls = NULL,
+ .hosts_avoid_pipelining = NULL,
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ .hosts_pipe_connect = NULL,
#endif
- NULL, /* hosts_require_tls */
- NULL, /* hosts_avoid_tls */
- NULL, /* hosts_verify_avoid_tls */
- NULL, /* hosts_avoid_pipelining */
- NULL, /* hosts_avoid_esmtp */
+ .hosts_avoid_esmtp = NULL,
#ifdef SUPPORT_TLS
- NULL, /* hosts_nopass_tls */
- US"*", /* hosts_noproxy_tls */
+ .hosts_nopass_tls = NULL,
+ .hosts_noproxy_tls = US"*",
#endif
- 5*60, /* command_timeout */
- 5*60, /* connect_timeout; shorter system default overrides */
- 5*60, /* data timeout */
- 10*60, /* final timeout */
- 1024, /* size_addition */
- 5, /* hosts_max_try */
- 50, /* hosts_max_try_hardlimit */
- TRUE, /* address_retry_include_sender */
- FALSE, /* allow_localhost */
- FALSE, /* authenticated_sender_force */
- FALSE, /* gethostbyname */
- TRUE, /* dns_qualify_single */
- FALSE, /* dns_search_parents */
- { NULL, NULL }, /* dnssec_domains {request,require} */
- TRUE, /* delay_after_cutoff */
- FALSE, /* hosts_override */
- FALSE, /* hosts_randomize */
- TRUE, /* keepalive */
- FALSE, /* lmtp_ignore_quota */
- NULL, /* expand_retry_include_ip_address */
- TRUE /* retry_include_ip_address */
+ .command_timeout = 5*60,
+ .connect_timeout = 5*60,
+ .data_timeout = 5*60,
+ .final_timeout = 10*60,
+ .size_addition = 1024,
+ .hosts_max_try = 5,
+ .hosts_max_try_hardlimit = 50,
+ .address_retry_include_sender = TRUE,
+ .allow_localhost = FALSE,
+ .authenticated_sender_force = FALSE,
+ .gethostbyname = FALSE,
+ .dns_qualify_single = TRUE,
+ .dns_search_parents = FALSE,
+ .dnssec = { .request=NULL, .require=NULL },
+ .delay_after_cutoff = TRUE,
+ .hosts_override = FALSE,
+ .hosts_randomize = FALSE,
+ .keepalive = TRUE,
+ .lmtp_ignore_quota = FALSE,
+ .expand_retry_include_ip_address = NULL,
+ .retry_include_ip_address = TRUE,
#ifdef SUPPORT_SOCKS
- ,NULL /* socks_proxy */
+ .socks_proxy = NULL,
#endif
#ifdef SUPPORT_TLS
- ,NULL, /* tls_certificate */
- NULL, /* tls_crl */
- NULL, /* tls_privatekey */
- NULL, /* tls_require_ciphers */
- NULL, /* tls_sni */
- US"system", /* tls_verify_certificates */
- EXIM_CLIENT_DH_DEFAULT_MIN_BITS,
- /* tls_dh_min_bits */
- TRUE, /* tls_tempfail_tryclear */
- NULL, /* tls_verify_hosts */
- US"*", /* tls_try_verify_hosts */
- US"*" /* tls_verify_cert_hostnames */
+ .tls_certificate = NULL,
+ .tls_crl = NULL,
+ .tls_privatekey = NULL,
+ .tls_require_ciphers = NULL,
+ .tls_sni = NULL,
+ .tls_verify_certificates = US"system",
+ .tls_dh_min_bits = EXIM_CLIENT_DH_DEFAULT_MIN_BITS,
+ .tls_tempfail_tryclear = TRUE,
+ .tls_verify_hosts = NULL,
+ .tls_try_verify_hosts = US"*",
+ .tls_verify_cert_hostnames = US"*",
+#endif
+#ifdef SUPPORT_I18N
+ .utf8_downconvert = NULL,
#endif
#ifndef DISABLE_DKIM
- , {NULL, /* dkim_canon */
- NULL, /* dkim_domain */
- NULL, /* dkim_private_key */
- NULL, /* dkim_selector */
- NULL, /* dkim_sign_headers */
- NULL, /* dkim_strict */
- FALSE} /* dot_stuffed */
+ .dkim =
+ {.dkim_domain = NULL,
+ .dkim_identity = NULL,
+ .dkim_private_key = NULL,
+ .dkim_selector = NULL,
+ .dkim_canon = NULL,
+ .dkim_sign_headers = NULL,
+ .dkim_strict = NULL,
+ .dkim_hash = US"sha256",
+ .dkim_timestamps = NULL,
+ .dot_stuffed = FALSE,
+ .force_bodyhash = FALSE,
+# ifdef EXPERIMENTAL_ARC
+ .arc_signspec = NULL,
+# endif
+ },
+# ifdef EXPERIMENTAL_ARC
+ .arc_sign = NULL,
+# endif
#endif
};
static BOOL pipelining_active; /* current transaction is in pipe mode */
+static unsigned ehlo_response(uschar * buf, unsigned checks);
+
+
/*************************************************
* Setup entry point *
*************************************************/
smtp_transport_setup(transport_instance *tblock, address_item *addrlist,
transport_feedback *tf, uid_t uid, gid_t gid, uschar **errmsg)
{
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)(tblock->options_block);
+smtp_transport_options_block *ob = SOB tblock->options_block;
errmsg = errmsg; /* Keep picky compilers happy */
uid = uid;
void
smtp_transport_init(transport_instance *tblock)
{
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)(tblock->options_block);
+smtp_transport_options_block *ob = SOB tblock->options_block;
/* Retry_use_local_part defaults FALSE if unset */
/* Set the default port according to the protocol */
-if (ob->port == NULL)
- ob->port = (strcmpic(ob->protocol, US"lmtp") == 0)? US"lmtp" :
- (strcmpic(ob->protocol, US"smtps") == 0)? US"smtps" : US"smtp";
+if (!ob->port)
+ ob->port = strcmpic(ob->protocol, US"lmtp") == 0
+ ? US"lmtp"
+ : strcmpic(ob->protocol, US"smtps") == 0
+ ? US"smtps" : US"smtp";
/* Set up the setup entry point, to be called before subprocesses for this
transport. */
/* This writes to the main log and to the message log.
Arguments:
- addr the address item containing error information
host the current host
+ detail the current message (addr_item->message)
+ basic_errno the errno (addr_item->basic_errno)
Returns: nothing
*/
static void
-write_logs(address_item *addr, host_item *host)
+write_logs(const host_item *host, const uschar *suffix, int basic_errno)
{
-uschar * message = LOGGING(outgoing_port)
- ? string_sprintf("H=%s [%s]:%d", host->name, host->address,
+gstring * message = LOGGING(outgoing_port)
+ ? string_fmt_append(NULL, "H=%s [%s]:%d", host->name, host->address,
host->port == PORT_NONE ? 25 : host->port)
- : string_sprintf("H=%s [%s]", host->name, host->address);
+ : string_fmt_append(NULL, "H=%s [%s]", host->name, host->address);
-if (addr->message)
+if (suffix)
{
- message = string_sprintf("%s: %s", message, addr->message);
- if (addr->basic_errno > 0)
- message = string_sprintf("%s: %s", message, strerror(addr->basic_errno));
- log_write(0, LOG_MAIN, "%s", message);
- deliver_msglog("%s %s\n", tod_stamp(tod_log), message);
+ message = string_fmt_append(message, ": %s", suffix);
+ if (basic_errno > 0)
+ message = string_fmt_append(message, ": %s", strerror(basic_errno));
}
else
- {
- const uschar * s = exim_errstr(addr->basic_errno);
- log_write(0, LOG_MAIN, "%s %s", message, s);
- deliver_msglog("%s %s %s\n", tod_stamp(tod_log), message, s);
- }
+ message = string_fmt_append(message, " %s", exim_errstr(basic_errno));
+
+log_write(0, LOG_MAIN, "%s", string_from_gstring(message));
+deliver_msglog("%s %s\n", tod_stamp(tod_log), message->s);
}
static void
}
#endif
+/*************************************************
+* Reap SMTP specific responses *
+*************************************************/
+static int
+smtp_discard_responses(smtp_context * sx, smtp_transport_options_block * ob,
+ int count)
+{
+uschar flushbuffer[4096];
+
+while (count-- > 0)
+ {
+ if (!smtp_read_response(sx, flushbuffer, sizeof(flushbuffer),
+ '2', ob->command_timeout)
+ && (errno != 0 || flushbuffer[0] == 0))
+ break;
+ }
+return count;
+}
+
+
+/* Return boolean success */
+
+static BOOL
+smtp_reap_banner(smtp_context * sx)
+{
+BOOL good_response = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
+ '2', (SOB sx->conn_args.ob)->command_timeout);
+#ifdef EXPERIMENTAL_DSN_INFO
+sx->smtp_greeting = string_copy(sx->buffer);
+#endif
+return good_response;
+}
+
+static BOOL
+smtp_reap_ehlo(smtp_context * sx)
+{
+if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
+ (SOB sx->conn_args.ob)->command_timeout))
+ {
+ if (errno != 0 || sx->buffer[0] == 0 || sx->lmtp)
+ {
+#ifdef EXPERIMENTAL_DSN_INFO
+ sx->helo_response = string_copy(sx->buffer);
+#endif
+ return FALSE;
+ }
+ sx->esmtp = FALSE;
+ }
+#ifdef EXPERIMENTAL_DSN_INFO
+sx->helo_response = string_copy(sx->buffer);
+#endif
+return TRUE;
+}
+
+
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+static uschar *
+ehlo_cache_key(const smtp_context * sx)
+{
+host_item * host = sx->conn_args.host;
+return Ustrchr(host->address, ':')
+ ? string_sprintf("[%s]:%d.EHLO", host->address,
+ host->port == PORT_NONE ? sx->port : host->port)
+ : string_sprintf("%s:%d.EHLO", host->address,
+ host->port == PORT_NONE ? sx->port : host->port);
+}
+
+static void
+write_ehlo_cache_entry(const smtp_context * sx)
+{
+open_db dbblock, * dbm_file;
+
+if ((dbm_file = dbfn_open(US"misc", O_RDWR, &dbblock, TRUE)))
+ {
+ uschar * ehlo_resp_key = ehlo_cache_key(sx);
+ dbdata_ehlo_resp er = { .data = sx->ehlo_resp };
+
+ dbfn_write(dbm_file, ehlo_resp_key, &er, (int)sizeof(er));
+ dbfn_close(dbm_file);
+ }
+}
+
+static void
+invalidate_ehlo_cache_entry(smtp_context * sx)
+{
+open_db dbblock, * dbm_file;
+
+if ( sx->early_pipe_active
+ && (dbm_file = dbfn_open(US"misc", O_RDWR, &dbblock, TRUE)))
+ {
+ uschar * ehlo_resp_key = ehlo_cache_key(sx);
+ dbfn_delete(dbm_file, ehlo_resp_key);
+ dbfn_close(dbm_file);
+ }
+}
+
+static BOOL
+read_ehlo_cache_entry(smtp_context * sx)
+{
+open_db dbblock;
+open_db * dbm_file;
+
+if (!(dbm_file = dbfn_open(US"misc", O_RDONLY, &dbblock, FALSE)))
+ { DEBUG(D_transport) debug_printf("ehlo-cache: no misc DB\n"); }
+else
+ {
+ uschar * ehlo_resp_key = ehlo_cache_key(sx);
+ dbdata_ehlo_resp * er;
+
+ if (!(er = dbfn_read(dbm_file, ehlo_resp_key)))
+ { DEBUG(D_transport) debug_printf("no ehlo-resp record\n"); }
+ else if (time(NULL) - er->time_stamp > retry_data_expire)
+ {
+ DEBUG(D_transport) debug_printf("ehlo-resp record too old\n");
+ dbfn_close(dbm_file);
+ if ((dbm_file = dbfn_open(US"misc", O_RDWR, &dbblock, TRUE)))
+ dbfn_delete(dbm_file, ehlo_resp_key);
+ }
+ else
+ {
+ sx->ehlo_resp = er->data;
+ dbfn_close(dbm_file);
+ DEBUG(D_transport) debug_printf(
+ "EHLO response bits from cache: cleartext 0x%04x crypted 0x%04x\n",
+ er->data.cleartext_features, er->data.crypted_features);
+ return TRUE;
+ }
+ dbfn_close(dbm_file);
+ }
+return FALSE;
+}
+
+
+
+/* Return an auths bitmap for the set of AUTH methods offered by the server
+which match our authenticators. */
+
+static unsigned short
+study_ehlo_auths(smtp_context * sx)
+{
+uschar * names;
+auth_instance * au;
+uschar authnum;
+unsigned short authbits = 0;
+
+if (!sx->esmtp) return 0;
+if (!regex_AUTH) regex_AUTH = regex_must_compile(AUTHS_REGEX, FALSE, TRUE);
+if (!regex_match_and_setup(regex_AUTH, sx->buffer, 0, -1)) return 0;
+expand_nmax = -1; /* reset */
+names = string_copyn(expand_nstring[1], expand_nlength[1]);
+
+for (au = auths, authnum = 0; au; au = au->next, authnum++) if (au->client)
+ {
+ const uschar * list = names;
+ int sep = ' ';
+ uschar name[32];
+
+ while (string_nextinlist(&list, &sep, name, sizeof(name)))
+ if (strcmpic(au->public_name, name) == 0)
+ { authbits |= BIT(authnum); break; }
+ }
+
+DEBUG(D_transport)
+ debug_printf("server offers %s AUTH, methods '%s', bitmap 0x%04x\n",
+ tls_out.active.sock >= 0 ? "crypted" : "plaintext", names, authbits);
+
+if (tls_out.active.sock >= 0)
+ sx->ehlo_resp.crypted_auths = authbits;
+else
+ sx->ehlo_resp.cleartext_auths = authbits;
+return authbits;
+}
+
+
+
+
+/* Wait for and check responses for early-pipelining.
+
+Called from the lower-level smtp_read_response() function
+used for general code that assume synchronisation, if context
+flags indicate outstanding early-pipelining commands. Also
+called fom sync_responses() which handles pipelined commands.
+
+Arguments:
+ sx smtp connection context
+ countp number of outstanding responses, adjusted on return
+
+Return:
+ OK all well
+ FAIL SMTP error in response
+*/
+int
+smtp_reap_early_pipe(smtp_context * sx, int * countp)
+{
+BOOL pending_BANNER = sx->pending_BANNER;
+BOOL pending_EHLO = sx->pending_EHLO;
+
+sx->pending_BANNER = FALSE; /* clear early to avoid recursion */
+sx->pending_EHLO = FALSE;
+
+if (pending_BANNER)
+ {
+ DEBUG(D_transport) debug_printf("%s expect banner\n", __FUNCTION__);
+ (*countp)--;
+ if (!smtp_reap_banner(sx))
+ {
+ DEBUG(D_transport) debug_printf("bad banner\n");
+ goto fail;
+ }
+ }
+
+if (pending_EHLO)
+ {
+ unsigned peer_offered;
+ unsigned short authbits = 0, * ap;
+
+ DEBUG(D_transport) debug_printf("%s expect ehlo\n", __FUNCTION__);
+ (*countp)--;
+ if (!smtp_reap_ehlo(sx))
+ {
+ DEBUG(D_transport) debug_printf("bad response for EHLO\n");
+ goto fail;
+ }
+
+ /* Compare the actual EHLO response to the cached value we assumed;
+ on difference, dump or rewrite the cache and arrange for a retry. */
+
+ ap = tls_out.active.sock < 0
+ ? &sx->ehlo_resp.cleartext_auths : &sx->ehlo_resp.crypted_auths;
+
+ peer_offered = ehlo_response(sx->buffer,
+ (tls_out.active.sock < 0 ? OPTION_TLS : OPTION_REQUIRETLS)
+ | OPTION_CHUNKING | OPTION_PRDR | OPTION_DSN | OPTION_PIPE | OPTION_SIZE
+ | OPTION_UTF8 | OPTION_EARLY_PIPE
+ );
+ if ( peer_offered != sx->peer_offered
+ || (authbits = study_ehlo_auths(sx)) != *ap)
+ {
+ HDEBUG(D_transport)
+ debug_printf("EHLO extensions changed, 0x%04x/0x%04x -> 0x%04x/0x%04x\n",
+ sx->peer_offered, *ap, peer_offered, authbits);
+ *ap = authbits;
+ if (peer_offered & OPTION_EARLY_PIPE)
+ write_ehlo_cache_entry(sx);
+ else
+ invalidate_ehlo_cache_entry(sx);
+
+ return OK; /* just carry on */
+ }
+ }
+return OK;
+
+fail:
+ invalidate_ehlo_cache_entry(sx);
+ (void) smtp_discard_responses(sx, sx->conn_args.ob, *countp);
+ return FAIL;
+}
+#endif
+
+
/*************************************************
* Synchronize SMTP responses *
*************************************************/
-1 timeout while reading RCPT response
-2 I/O or other non-response error for RCPT
-3 DATA or MAIL failed - errno and buffer set
+ -4 banner or EHLO failed (early-pipelining)
*/
static int
sync_responses(smtp_context * sx, int count, int pending_DATA)
{
-address_item *addr = sx->sync_addr;
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)sx->tblock->options_block;
+address_item * addr = sx->sync_addr;
+smtp_transport_options_block * ob = sx->conn_args.ob;
int yield = 0;
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+if (smtp_reap_early_pipe(sx, &count) != OK)
+ return -4;
+#endif
+
/* Handle the response for a MAIL command. On error, reinstate the original
command in big_buffer for error message use, and flush any further pending
responses before returning, except after I/O errors and timeouts. */
if (sx->pending_MAIL)
{
+ DEBUG(D_transport) debug_printf("%s expect mail\n", __FUNCTION__);
count--;
- if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer),
+ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
'2', ob->command_timeout))
{
DEBUG(D_transport) debug_printf("bad response for MAIL\n");
Ustrcpy(big_buffer, mail_command); /* Fits, because it came from there! */
if (errno == 0 && sx->buffer[0] != 0)
{
- uschar flushbuffer[4096];
int save_errno = 0;
if (sx->buffer[0] == '4')
{
save_errno = ERRNO_MAIL4XX;
addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
}
- while (count-- > 0)
- {
- if (!smtp_read_response(&sx->inblock, flushbuffer, sizeof(flushbuffer),
- '2', ob->command_timeout)
- && (errno != 0 || flushbuffer[0] == 0))
- break;
- }
+ count = smtp_discard_responses(sx, ob, count);
errno = save_errno;
}
while (count-- > 0) /* Mark any pending addrs with the host used */
{
while (addr->transport_return != PENDING_DEFER) addr = addr->next;
- addr->host_used = sx->host;
+ addr->host_used = sx->conn_args.host;
addr = addr->next;
}
return -3;
return -2;
/* The address was accepted */
- addr->host_used = sx->host;
+ addr->host_used = sx->conn_args.host;
- if (smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer),
+ DEBUG(D_transport) debug_printf("%s expect rcpt\n", __FUNCTION__);
+ if (smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
'2', ob->command_timeout))
{
yield |= 1;
else if (errno == ETIMEDOUT)
{
uschar *message = string_sprintf("SMTP timeout after RCPT TO:<%s>",
- transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes));
+ transport_rcpt_address(addr, sx->conn_args.tblock->rcpt_include_affixes));
set_errno_nohost(sx->first_addr, ETIMEDOUT, message, DEFER, FALSE);
retry_add_item(addr, addr->address_retry_key, 0);
update_waiting = FALSE;
else if (errno != 0 || sx->buffer[0] == 0)
{
string_format(big_buffer, big_buffer_size, "RCPT TO:<%s>",
- transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes));
+ transport_rcpt_address(addr, sx->conn_args.tblock->rcpt_include_affixes));
return -2;
}
{
addr->message =
string_sprintf("SMTP error from remote mail server after RCPT TO:<%s>: "
- "%s", transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes),
+ "%s", transport_rcpt_address(addr, sx->conn_args.tblock->rcpt_include_affixes),
string_printing(sx->buffer));
setflag(addr, af_pass_message);
if (!sx->verify)
- msglog_line(sx->host, addr->message);
+ msglog_line(sx->conn_args.host, addr->message);
/* The response was 5xx */
/* Log temporary errors if there are more hosts to be tried.
If not, log this last one in the == line. */
- if (sx->host->next)
- log_write(0, LOG_MAIN, "H=%s [%s]: %s",
- sx->host->name, sx->host->address, addr->message);
+ if (sx->conn_args.host->next)
+ if (LOGGING(outgoing_port))
+ log_write(0, LOG_MAIN, "H=%s [%s]:%d %s", sx->conn_args.host->name,
+ sx->conn_args.host->address,
+ sx->port == PORT_NONE ? 25 : sx->port, addr->message);
+ else
+ log_write(0, LOG_MAIN, "H=%s [%s]: %s", sx->conn_args.host->name,
+ sx->conn_args.host->address, addr->message);
#ifndef DISABLE_EVENT
else
/* Handle a response to DATA. If we have not had any good recipients, either
previously or in this block, the response is ignored. */
-if (pending_DATA != 0 &&
- !smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer),
- '3', ob->command_timeout))
+if (pending_DATA != 0)
{
- int code;
- uschar *msg;
- BOOL pass_message;
- if (pending_DATA > 0 || (yield & 1) != 0)
+ DEBUG(D_transport) debug_printf("%s expect data\n", __FUNCTION__);
+ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
+ '3', ob->command_timeout))
{
- if (errno == 0 && sx->buffer[0] == '4')
+ int code;
+ uschar *msg;
+ BOOL pass_message;
+ if (pending_DATA > 0 || (yield & 1) != 0)
{
- errno = ERRNO_DATA4XX;
- sx->first_addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
+ if (errno == 0 && sx->buffer[0] == '4')
+ {
+ errno = ERRNO_DATA4XX;
+ sx->first_addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
+ }
+ return -3;
}
- return -3;
+ (void)check_response(sx->conn_args.host, &errno, 0, sx->buffer, &code, &msg, &pass_message);
+ DEBUG(D_transport) debug_printf("%s\nerror for DATA ignored: pipelining "
+ "is in use and there were no good recipients\n", msg);
}
- (void)check_response(sx->host, &errno, 0, sx->buffer, &code, &msg, &pass_message);
- DEBUG(D_transport) debug_printf("%s\nerror for DATA ignored: pipelining "
- "is in use and there were no good recipients\n", msg);
}
/* All responses read and handled; MAIL (if present) received 2xx and DATA (if
-/* Do the client side of smtp-level authentication */
-/*
+
+
+/* Try an authenticator's client entry */
+
+static int
+try_authenticator(smtp_context * sx, auth_instance * au)
+{
+smtp_transport_options_block * ob = sx->conn_args.ob; /* transport options */
+host_item * host = sx->conn_args.host; /* host to deliver to */
+int rc;
+
+sx->outblock.authenticating = TRUE;
+rc = (au->info->clientcode)(au, sx, ob->command_timeout,
+ sx->buffer, sizeof(sx->buffer));
+sx->outblock.authenticating = FALSE;
+DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n", au->name, rc);
+
+/* A temporary authentication failure must hold up delivery to
+this host. After a permanent authentication failure, we carry on
+to try other authentication methods. If all fail hard, try to
+deliver the message unauthenticated unless require_auth was set. */
+
+switch(rc)
+ {
+ case OK:
+ f.smtp_authenticated = TRUE; /* stops the outer loop */
+ client_authenticator = au->name;
+ if (au->set_client_id)
+ client_authenticated_id = expand_string(au->set_client_id);
+ break;
+
+ /* Failure after writing a command */
+
+ case FAIL_SEND:
+ return FAIL_SEND;
+
+ /* Failure after reading a response */
+
+ case FAIL:
+ if (errno != 0 || sx->buffer[0] != '5') return FAIL;
+ log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s",
+ au->name, host->name, host->address, sx->buffer);
+ break;
+
+ /* Failure by some other means. In effect, the authenticator
+ decided it wasn't prepared to handle this case. Typically this
+ is the result of "fail" in an expansion string. Do we need to
+ log anything here? Feb 2006: a message is now put in the buffer
+ if logging is required. */
+
+ case CANCELLED:
+ if (*sx->buffer != 0)
+ log_write(0, LOG_MAIN, "%s authenticator cancelled "
+ "authentication H=%s [%s] %s", au->name, host->name,
+ host->address, sx->buffer);
+ break;
+
+ /* Internal problem, message in buffer. */
+
+ case ERROR:
+ set_errno_nohost(sx->addrlist, ERRNO_AUTHPROB, string_copy(sx->buffer),
+ DEFER, FALSE);
+ return ERROR;
+ }
+return OK;
+}
+
+
+
+
+/* Do the client side of smtp-level authentication.
+
Arguments:
- buffer EHLO response from server (gets overwritten)
- addrlist chain of potential addresses to deliver
- host host to deliver to
- ob transport options
- ibp, obp comms channel control blocks
+ sx smtp connection context
+
+sx->buffer should have the EHLO response from server (gets overwritten)
Returns:
OK Success, or failed (but not required): global "smtp_authenticated" set
FAIL - response
*/
-int
-smtp_auth(uschar *buffer, unsigned bufsize, address_item *addrlist, host_item *host,
- smtp_transport_options_block *ob, BOOL is_esmtp,
- smtp_inblock *ibp, smtp_outblock *obp)
+static int
+smtp_auth(smtp_context * sx)
{
-int require_auth;
-uschar *fail_reason = US"server did not advertise AUTH support";
+host_item * host = sx->conn_args.host; /* host to deliver to */
+smtp_transport_options_block * ob = sx->conn_args.ob; /* transport options */
+int require_auth = verify_check_given_host(CUSS &ob->hosts_require_auth, host);
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+unsigned short authbits = tls_out.active.sock >= 0
+ ? sx->ehlo_resp.crypted_auths : sx->ehlo_resp.cleartext_auths;
+#endif
+uschar * fail_reason = US"server did not advertise AUTH support";
-smtp_authenticated = FALSE;
+f.smtp_authenticated = FALSE;
client_authenticator = client_authenticated_id = client_authenticated_sender = NULL;
-require_auth = verify_check_given_host(&ob->hosts_require_auth, host);
-if (is_esmtp && !regex_AUTH) regex_AUTH =
- regex_must_compile(US"\\n250[\\s\\-]AUTH\\s+([\\-\\w\\s]+)(?:\\n|$)",
- FALSE, TRUE);
+if (!regex_AUTH)
+ regex_AUTH = regex_must_compile(AUTHS_REGEX, FALSE, TRUE);
-if (is_esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1))
+/* Is the server offering AUTH? */
+
+if ( sx->esmtp
+ &&
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ sx->early_pipe_active ? authbits
+ :
+#endif
+ regex_match_and_setup(regex_AUTH, sx->buffer, 0, -1)
+ )
{
- uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]);
+ uschar * names = NULL;
expand_nmax = -1; /* reset */
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (!sx->early_pipe_active)
+#endif
+ names = string_copyn(expand_nstring[1], expand_nlength[1]);
+
/* Must not do this check until after we have saved the result of the
- regex match above. */
+ regex match above as the check could be another RE. */
- if (require_auth == OK ||
- verify_check_given_host(&ob->hosts_try_auth, host) == OK)
+ if ( require_auth == OK
+ || verify_check_given_host(CUSS &ob->hosts_try_auth, host) == OK)
{
- auth_instance *au;
- fail_reason = US"no common mechanisms were found";
+ auth_instance * au;
DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n");
+ fail_reason = US"no common mechanisms were found";
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (sx->early_pipe_active)
+ {
+ /* Scan our authenticators (which support use by a client and were offered
+ by the server (checked at cache-write time)), not suppressed by
+ client_condition. If one is found, attempt to authenticate by calling its
+ client function. We are limited to supporting up to 16 authenticator
+ public-names by the number of bits in a short. */
+
+ uschar bitnum;
+ int rc;
+
+ for (bitnum = 0, au = auths;
+ !f.smtp_authenticated && au && bitnum < 16;
+ bitnum++, au = au->next) if (authbits & BIT(bitnum))
+ {
+ if ( au->client_condition
+ && !expand_check_condition(au->client_condition, au->name,
+ US"client authenticator"))
+ {
+ DEBUG(D_transport) debug_printf("skipping %s authenticator: %s\n",
+ au->name, "client_condition is false");
+ continue;
+ }
+
+ /* Found data for a listed mechanism. Call its client entry. Set
+ a flag in the outblock so that data is overwritten after sending so
+ that reflections don't show it. */
+
+ fail_reason = US"authentication attempt(s) failed";
+
+ if ((rc = try_authenticator(sx, au)) != OK)
+ return rc;
+ }
+ }
+ else
+#endif
/* Scan the configured authenticators looking for one which is configured
for use as a client, which is not suppressed by client_condition, and
If one is found, attempt to authenticate by calling its client function.
*/
- for (au = auths; !smtp_authenticated && au != NULL; au = au->next)
+ for (au = auths; !f.smtp_authenticated && au; au = au->next)
{
uschar *p = names;
- if (!au->client ||
- (au->client_condition != NULL &&
- !expand_check_condition(au->client_condition, au->name,
- US"client authenticator")))
+
+ if ( !au->client
+ || ( au->client_condition
+ && !expand_check_condition(au->client_condition, au->name,
+ US"client authenticator")))
{
DEBUG(D_transport) debug_printf("skipping %s authenticator: %s\n",
au->name,
/* Loop to scan supported server mechanisms */
- while (*p != 0)
+ while (*p)
{
- int rc;
int len = Ustrlen(au->public_name);
+ int rc;
+
while (isspace(*p)) p++;
if (strncmpic(au->public_name, p, len) != 0 ||
that reflections don't show it. */
fail_reason = US"authentication attempt(s) failed";
- obp->authenticating = TRUE;
- rc = (au->info->clientcode)(au, ibp, obp,
- ob->command_timeout, buffer, bufsize);
- obp->authenticating = FALSE;
- DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n",
- au->name, rc);
-
- /* A temporary authentication failure must hold up delivery to
- this host. After a permanent authentication failure, we carry on
- to try other authentication methods. If all fail hard, try to
- deliver the message unauthenticated unless require_auth was set. */
-
- switch(rc)
- {
- case OK:
- smtp_authenticated = TRUE; /* stops the outer loop */
- client_authenticator = au->name;
- if (au->set_client_id != NULL)
- client_authenticated_id = expand_string(au->set_client_id);
- break;
-
- /* Failure after writing a command */
-
- case FAIL_SEND:
- return FAIL_SEND;
- /* Failure after reading a response */
-
- case FAIL:
- if (errno != 0 || buffer[0] != '5') return FAIL;
- log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s",
- au->name, host->name, host->address, buffer);
- break;
-
- /* Failure by some other means. In effect, the authenticator
- decided it wasn't prepared to handle this case. Typically this
- is the result of "fail" in an expansion string. Do we need to
- log anything here? Feb 2006: a message is now put in the buffer
- if logging is required. */
-
- case CANCELLED:
- if (*buffer != 0)
- log_write(0, LOG_MAIN, "%s authenticator cancelled "
- "authentication H=%s [%s] %s", au->name, host->name,
- host->address, buffer);
- break;
-
- /* Internal problem, message in buffer. */
-
- case ERROR:
- set_errno_nohost(addrlist, ERRNO_AUTHPROB, string_copy(buffer),
- DEFER, FALSE);
- return ERROR;
- }
+ if ((rc = try_authenticator(sx, au)) != OK)
+ return rc;
break; /* If not authenticated, try next authenticator */
} /* Loop for scanning supported server mechanisms */
/* If we haven't authenticated, but are required to, give up. */
-if (require_auth == OK && !smtp_authenticated)
+if (require_auth == OK && !f.smtp_authenticated)
{
- set_errno_nohost(addrlist, ERRNO_AUTHFAIL,
+ set_errno_nohost(sx->addrlist, ERRNO_AUTHFAIL,
string_sprintf("authentication required but %s", fail_reason), DEFER,
FALSE);
return DEFER;
addrlist chain of potential addresses to deliver
ob transport options
-Globals smtp_authenticated
+Globals f.smtp_authenticated
client_authenticated_sender
Return True on error, otherwise buffer has (possibly empty) terminated string
*/
uschar *local_authenticated_sender = authenticated_sender;
#ifdef notdef
- debug_printf("smtp_mail_auth_str: as<%s> os<%s> SA<%s>\n", authenticated_sender, ob->authenticated_sender, smtp_authenticated?"Y":"N");
+ debug_printf("smtp_mail_auth_str: as<%s> os<%s> SA<%s>\n", authenticated_sender, ob->authenticated_sender, f.smtp_authenticated?"Y":"N");
#endif
if (ob->authenticated_sender != NULL)
uschar *new = expand_string(ob->authenticated_sender);
if (new == NULL)
{
- if (!expand_string_forcedfail)
+ if (!f.expand_string_forcedfail)
{
uschar *message = string_sprintf("failed to expand "
"authenticated_sender: %s", expand_string_message);
/* Add the authenticated sender address if present */
-if ((smtp_authenticated || ob->authenticated_sender_force) &&
+if ((f.smtp_authenticated || ob->authenticated_sender_force) &&
local_authenticated_sender != NULL)
{
string_format(buffer, bufsize, " AUTH=%s",
-#ifdef EXPERIMENTAL_DANE
+#ifdef SUPPORT_DANE
/* Lookup TLSA record for host/port.
Return: OK success with dnssec; DANE mode
DEFER Do not use this host now, may retry later
/* move this out to host.c given the similarity to dns_lookup() ? */
uschar buffer[300];
const uschar * fullname = buffer;
+int rc;
+BOOL sec;
/* TLSA lookup string */
(void)sprintf(CS buffer, "_%d._tcp.%.256s", host->port, host->name);
-switch (dns_lookup(dnsa, buffer, T_TLSA, &fullname))
+rc = dns_lookup(dnsa, buffer, T_TLSA, &fullname);
+sec = dns_is_secure(dnsa);
+DEBUG(D_transport)
+ debug_printf("TLSA lookup ret %d %sDNSSEC\n", rc, sec ? "" : "not ");
+
+switch (rc)
{
+ case DNS_AGAIN:
+ return DEFER; /* just defer this TLS'd conn */
+
case DNS_SUCCEED:
- if (!dns_is_secure(dnsa))
+ if (sec)
{
- log_write(0, LOG_MAIN, "DANE error: TLSA lookup not DNSSEC");
- return DEFER;
- }
- return OK;
+ DEBUG(D_transport)
+ {
+ dns_scan dnss;
+ dns_record * rr;
+ for (rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS); rr;
+ rr = dns_next_rr(dnsa, &dnss, RESET_NEXT))
+ if (rr->type == T_TLSA && rr->size > 3)
+ {
+ uint16_t payload_length = rr->size - 3;
+ uschar s[MAX_TLSA_EXPANDED_SIZE], * sp = s, * p = US rr->data;
- case DNS_AGAIN:
- return DEFER; /* just defer this TLS'd conn */
+ sp += sprintf(CS sp, "%d ", *p++); /* usage */
+ sp += sprintf(CS sp, "%d ", *p++); /* selector */
+ sp += sprintf(CS sp, "%d ", *p++); /* matchtype */
+ while (payload_length-- > 0 && sp-s < (MAX_TLSA_EXPANDED_SIZE - 4))
+ sp += sprintf(CS sp, "%02x", *p++);
+
+ debug_printf(" %s\n", s);
+ }
+ }
+ return OK;
+ }
+ log_write(0, LOG_MAIN,
+ "DANE error: TLSA lookup for %s not DNSSEC", host->name);
+ /*FALLTRHOUGH*/
case DNS_NODATA: /* no TLSA RR for this lookup */
case DNS_NOMATCH: /* no records at all for this lookup */
#endif
uschar * save_sender_address = sender_address;
uschar * local_identity = NULL;
-smtp_transport_options_block * ob =
- (smtp_transport_options_block *)tblock->options_block;
+smtp_transport_options_block * ob = SOB tblock->options_block;
sender_address = sender;
-static uschar
-ehlo_response(uschar * buf, uschar checks)
+static unsigned
+ehlo_response(uschar * buf, unsigned checks)
{
size_t bsize = Ustrlen(buf);
+/* debug_printf("%s: check for 0x%04x\n", __FUNCTION__, checks); */
+
#ifdef SUPPORT_TLS
-if ( checks & PEER_OFFERED_TLS
+# ifdef EXPERIMENTAL_REQUIRETLS
+if ( checks & OPTION_REQUIRETLS
+ && pcre_exec(regex_REQUIRETLS, NULL, CS buf,bsize, 0, PCRE_EOPT, NULL,0) < 0)
+# endif
+ checks &= ~OPTION_REQUIRETLS;
+
+if ( checks & OPTION_TLS
&& pcre_exec(regex_STARTTLS, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_TLS;
#endif
+ checks &= ~OPTION_TLS;
-if ( checks & PEER_OFFERED_IGNQ
+if ( checks & OPTION_IGNQ
&& pcre_exec(regex_IGNOREQUOTA, NULL, CS buf, bsize, 0,
PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_IGNQ;
+ checks &= ~OPTION_IGNQ;
-if ( checks & PEER_OFFERED_CHUNKING
+if ( checks & OPTION_CHUNKING
&& pcre_exec(regex_CHUNKING, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_CHUNKING;
+ checks &= ~OPTION_CHUNKING;
#ifndef DISABLE_PRDR
-if ( checks & PEER_OFFERED_PRDR
+if ( checks & OPTION_PRDR
&& pcre_exec(regex_PRDR, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_PRDR;
#endif
+ checks &= ~OPTION_PRDR;
#ifdef SUPPORT_I18N
-if ( checks & PEER_OFFERED_UTF8
+if ( checks & OPTION_UTF8
&& pcre_exec(regex_UTF8, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_UTF8;
#endif
+ checks &= ~OPTION_UTF8;
-if ( checks & PEER_OFFERED_DSN
+if ( checks & OPTION_DSN
&& pcre_exec(regex_DSN, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_DSN;
+ checks &= ~OPTION_DSN;
-if ( checks & PEER_OFFERED_PIPE
+if ( checks & OPTION_PIPE
&& pcre_exec(regex_PIPELINING, NULL, CS buf, bsize, 0,
PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_PIPE;
+ checks &= ~OPTION_PIPE;
-if ( checks & PEER_OFFERED_SIZE
+if ( checks & OPTION_SIZE
&& pcre_exec(regex_SIZE, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_SIZE;
+ checks &= ~OPTION_SIZE;
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+if ( checks & OPTION_EARLY_PIPE
+ && pcre_exec(regex_EARLY_PIPE, NULL, CS buf, bsize, 0,
+ PCRE_EOPT, NULL, 0) < 0)
+#endif
+ checks &= ~OPTION_EARLY_PIPE;
+/* debug_printf("%s: found 0x%04x\n", __FUNCTION__, checks); */
return checks;
}
smtp_chunk_cmd_callback(transport_ctx * tctx, unsigned chunk_size,
unsigned flags)
{
-smtp_transport_options_block * ob =
- (smtp_transport_options_block *)(tctx->tblock->options_block);
+smtp_transport_options_block * ob = SOB tctx->tblock->options_block;
smtp_context * sx = tctx->smtp_context;
int cmd_count = 0;
int prev_cmd_count;
-/* Write SMTP chunk header command */
+/* Write SMTP chunk header command. If not reaping responses, note that
+there may be more writes (like, the chunk data) done soon. */
if (chunk_size > 0)
{
- if((cmd_count = smtp_write_command(&sx->outblock, FALSE, "BDAT %u%s\r\n",
- chunk_size,
- flags & tc_chunk_last ? " LAST" : "")
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ BOOL new_conn = !!(sx->outblock.conn_args);
+#endif
+ if((cmd_count = smtp_write_command(sx,
+ flags & tc_reap_prev ? SCMD_FLUSH : SCMD_MORE,
+ "BDAT %u%s\r\n", chunk_size, flags & tc_chunk_last ? " LAST" : "")
) < 0) return ERROR;
if (flags & tc_chunk_last)
data_command = string_copy(big_buffer); /* Save for later error message */
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ /* That command write could have been the one that made the connection.
+ Copy the fd from the client conn ctx (smtp transport specific) to the
+ generic transport ctx. */
+
+ if (new_conn)
+ tctx->u.fd = sx->outblock.cctx->sock;
+#endif
}
prev_cmd_count = cmd_count += sx->cmd_count;
case 0: break; /* No 2xx or 5xx, but no probs */
case -1: /* Timeout on RCPT */
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ case -4: /* non-2xx for pipelined banner or EHLO */
+#endif
default: return ERROR; /* I/O error, or any MAIL/DATA error */
}
cmd_count = 1;
{
DEBUG(D_transport) debug_printf("look for one response for BDAT\n");
- if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '2',
+ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
ob->command_timeout))
{
if (errno == 0 && sx->buffer[0] == '4')
+
+
/*************************************************
* Make connection for given message *
*************************************************/
int
smtp_setup_conn(smtp_context * sx, BOOL suppress_tls)
{
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE)
dns_answer tlsa_dnsa;
#endif
+smtp_transport_options_block * ob = sx->conn_args.tblock->options_block;
BOOL pass_message = FALSE;
uschar * message = NULL;
int yield = OK;
int rc;
-sx->ob = (smtp_transport_options_block *) sx->tblock->options_block;
+sx->conn_args.ob = ob;
-sx->lmtp = strcmpic(sx->ob->protocol, US"lmtp") == 0;
-sx->smtps = strcmpic(sx->ob->protocol, US"smtps") == 0;
+sx->lmtp = strcmpic(ob->protocol, US"lmtp") == 0;
+sx->smtps = strcmpic(ob->protocol, US"smtps") == 0;
sx->ok = FALSE;
sx->send_rset = TRUE;
sx->send_quit = TRUE;
sx->utf8_needed = FALSE;
#endif
sx->dsn_all_lasthop = TRUE;
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE)
sx->dane = FALSE;
-sx->dane_required = verify_check_given_host(&sx->ob->hosts_require_dane, sx->host) == OK;
+sx->dane_required =
+ verify_check_given_host(CUSS &ob->hosts_require_dane, sx->conn_args.host) == OK;
+#endif
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+sx->early_pipe_active = sx->early_pipe_ok = FALSE;
+sx->ehlo_resp.cleartext_features = sx->ehlo_resp.crypted_features = 0;
+sx->pending_BANNER = sx->pending_EHLO = FALSE;
#endif
-if ((sx->max_rcpt = sx->tblock->max_addresses) == 0) sx->max_rcpt = 999999;
+if ((sx->max_rcpt = sx->conn_args.tblock->max_addresses) == 0) sx->max_rcpt = 999999;
sx->peer_offered = 0;
+sx->avoid_option = 0;
sx->igquotstr = US"";
-if (!sx->helo_data) sx->helo_data = sx->ob->helo_data;
+if (!sx->helo_data) sx->helo_data = ob->helo_data;
#ifdef EXPERIMENTAL_DSN_INFO
sx->smtp_greeting = NULL;
sx->helo_response = NULL;
sx->outblock.ptr = sx->outbuffer;
sx->outblock.cmd_count = 0;
sx->outblock.authenticating = FALSE;
+sx->outblock.conn_args = NULL;
/* Reset the parameters of a TLS session. */
the initial interaction and HELO/EHLO/LHLO. Connect timeout errors are handled
specially so they can be identified for retries. */
-if (continue_hostname == NULL)
+if (!continue_hostname)
{
if (sx->verify)
- HDEBUG(D_verify) debug_printf("interface=%s port=%d\n", sx->interface, sx->port);
+ HDEBUG(D_verify) debug_printf("interface=%s port=%d\n", sx->conn_args.interface, sx->port);
- /* This puts port into host->port */
- sx->inblock.sock = sx->outblock.sock =
- smtp_connect(sx->host, sx->host_af, sx->port, sx->interface,
- sx->ob->connect_timeout, sx->tblock);
+ /* Get the actual port the connection will use, into sx->conn_args.host */
- if (sx->inblock.sock < 0)
- {
- uschar * msg = NULL;
- if (sx->verify)
- {
- msg = US strerror(errno);
- HDEBUG(D_verify) debug_printf("connect: %s\n", msg);
- }
- set_errno_nohost(sx->addrlist,
- errno == ETIMEDOUT ? ERRNO_CONNECTTIMEOUT : errno,
- sx->verify ? string_sprintf("could not connect: %s", msg)
- : NULL,
- DEFER, FALSE);
- sx->send_quit = FALSE;
- return DEFER;
- }
+ smtp_port_for_connect(sx->conn_args.host, sx->port);
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE)
+ /* Do TLSA lookup for DANE */
{
tls_out.dane_verified = FALSE;
tls_out.tlsa_usage = 0;
- if (sx->host->dnssec == DS_YES)
+ if (sx->conn_args.host->dnssec == DS_YES)
{
if( sx->dane_required
- || verify_check_given_host(&sx->ob->hosts_try_dane, sx->host) == OK
+ || verify_check_given_host(CUSS &ob->hosts_try_dane, sx->conn_args.host) == OK
)
- switch (rc = tlsa_lookup(sx->host, &tlsa_dnsa, sx->dane_required))
+ switch (rc = tlsa_lookup(sx->conn_args.host, &tlsa_dnsa, sx->dane_required))
{
- case OK: sx->dane = TRUE; break;
+ case OK: sx->dane = TRUE;
+ ob->tls_tempfail_tryclear = FALSE;
+ break;
case FAIL_FORCED: break;
default: set_errno_nohost(sx->addrlist, ERRNO_DNSDEFER,
string_sprintf("DANE error: tlsa lookup %s",
rc == DEFER ? "DEFER" : "FAIL"),
rc, FALSE);
+# ifndef DISABLE_EVENT
+ (void) event_raise(sx->conn_args.tblock->event_action,
+ US"dane:fail", sx->dane_required
+ ? US"dane-required" : US"dnssec-invalid");
+# endif
return rc;
}
}
else if (sx->dane_required)
{
set_errno_nohost(sx->addrlist, ERRNO_DNSDEFER,
- string_sprintf("DANE error: %s lookup not DNSSEC", sx->host->name),
+ string_sprintf("DANE error: %s lookup not DNSSEC", sx->conn_args.host->name),
FAIL, FALSE);
+# ifndef DISABLE_EVENT
+ (void) event_raise(sx->conn_args.tblock->event_action,
+ US"dane:fail", US"dane-required");
+# endif
return FAIL;
}
-
- if (sx->dane)
- sx->ob->tls_tempfail_tryclear = FALSE;
}
#endif /*DANE*/
+ /* Make the TCP connection */
+
+ sx->cctx.tls_ctx = NULL;
+ sx->inblock.cctx = sx->outblock.cctx = &sx->cctx;
+ sx->avoid_option = sx->peer_offered = smtp_peer_options = 0;
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (verify_check_given_host(CUSS &ob->hosts_pipe_connect, sx->conn_args.host) == OK)
+ {
+ sx->early_pipe_ok = TRUE;
+ if ( read_ehlo_cache_entry(sx)
+ && sx->ehlo_resp.cleartext_features & OPTION_EARLY_PIPE)
+ {
+ DEBUG(D_transport) debug_printf("Using cached cleartext PIPE_CONNECT\n");
+ sx->early_pipe_active = TRUE;
+ sx->peer_offered = sx->ehlo_resp.cleartext_features;
+ }
+ }
+
+ if (sx->early_pipe_active)
+ sx->outblock.conn_args = &sx->conn_args;
+ else
+#endif
+ {
+ if ((sx->cctx.sock = smtp_connect(&sx->conn_args, NULL)) < 0)
+ {
+ uschar * msg = NULL;
+ if (sx->verify)
+ {
+ msg = US strerror(errno);
+ HDEBUG(D_verify) debug_printf("connect: %s\n", msg);
+ }
+ set_errno_nohost(sx->addrlist,
+ errno == ETIMEDOUT ? ERRNO_CONNECTTIMEOUT : errno,
+ sx->verify ? string_sprintf("could not connect: %s", msg)
+ : NULL,
+ DEFER, FALSE);
+ sx->send_quit = FALSE;
+ return DEFER;
+ }
+ }
/* Expand the greeting message while waiting for the initial response. (Makes
sense if helo_data contains ${lookup dnsdb ...} stuff). The expansion is
delayed till here so that $sending_interface and $sending_port are set. */
+/*XXX early-pipe: they still will not be. Is there any way to find out what they
+will be? Somehow I doubt it. */
if (sx->helo_data)
if (!(sx->helo_data = expand_string(sx->helo_data)))
if (!sx->smtps)
{
- BOOL good_response;
-
-#ifdef TCP_QUICKACK
- (void) setsockopt(sx->inblock.sock, IPPROTO_TCP, TCP_QUICKACK, US &off, sizeof(off));
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (sx->early_pipe_active)
+ {
+ sx->pending_BANNER = TRUE; /* sync_responses() must eventually handle */
+ sx->outblock.cmd_count = 1;
+ }
+ else
#endif
- good_response = smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer),
- '2', sx->ob->command_timeout);
-#ifdef EXPERIMENTAL_DSN_INFO
- sx->smtp_greeting = string_copy(sx->buffer);
+ {
+#ifdef TCP_QUICKACK
+ (void) setsockopt(sx->cctx.sock, IPPROTO_TCP, TCP_QUICKACK, US &off,
+ sizeof(off));
#endif
- if (!good_response) goto RESPONSE_FAILED;
+ if (!smtp_reap_banner(sx))
+ goto RESPONSE_FAILED;
+ }
#ifndef DISABLE_EVENT
{
uschar * s;
- lookup_dnssec_authenticated = sx->host->dnssec==DS_YES ? US"yes"
- : sx->host->dnssec==DS_NO ? US"no" : NULL;
- s = event_raise(sx->tblock->event_action, US"smtp:connect", sx->buffer);
+ lookup_dnssec_authenticated = sx->conn_args.host->dnssec==DS_YES ? US"yes"
+ : sx->conn_args.host->dnssec==DS_NO ? US"no" : NULL;
+ s = event_raise(sx->conn_args.tblock->event_action, US"smtp:connect", sx->buffer);
if (s)
{
set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL,
mailers use upper case for some reason (the RFC is quite clear about case
independence) so, for peace of mind, I gave in. */
- sx->esmtp = verify_check_given_host(&sx->ob->hosts_avoid_esmtp, sx->host) != OK;
+ sx->esmtp = verify_check_given_host(CUSS &ob->hosts_avoid_esmtp, sx->conn_args.host) != OK;
/* Alas; be careful, since this goto is not an error-out, so conceivably
we might set data between here and the target which we assume to exist
#ifdef SUPPORT_TLS
if (sx->smtps)
{
- smtp_peer_options |= PEER_OFFERED_TLS;
+ smtp_peer_options |= OPTION_TLS;
suppress_tls = FALSE;
- sx->ob->tls_tempfail_tryclear = FALSE;
+ ob->tls_tempfail_tryclear = FALSE;
smtp_command = US"SSL-on-connect";
goto TLS_NEGOTIATE;
}
if (sx->esmtp)
{
- if (smtp_write_command(&sx->outblock, FALSE, "%s %s\r\n",
- sx->lmtp ? "LHLO" : "EHLO", sx->helo_data) < 0)
+ if (smtp_write_command(sx,
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ sx->early_pipe_active ? SCMD_BUFFER :
+#endif
+ SCMD_FLUSH,
+ "%s %s\r\n", sx->lmtp ? "LHLO" : "EHLO", sx->helo_data) < 0)
goto SEND_FAILED;
sx->esmtp_sent = TRUE;
- if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '2',
- sx->ob->command_timeout))
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (sx->early_pipe_active)
{
- if (errno != 0 || sx->buffer[0] == 0 || sx->lmtp)
+ sx->pending_EHLO = TRUE;
+
+ /* If we have too many authenticators to handle and might need to AUTH
+ for this transport, pipeline no further as we will need the
+ list of auth methods offered. Reap the banner and EHLO. */
+
+ if ( (ob->hosts_require_auth || ob->hosts_try_auth)
+ && f.smtp_in_early_pipe_no_auth)
{
-#ifdef EXPERIMENTAL_DSN_INFO
- sx->helo_response = string_copy(sx->buffer);
-#endif
- goto RESPONSE_FAILED;
+ DEBUG(D_transport) debug_printf("may need to auth, so pipeline no further\n");
+ if (smtp_write_command(sx, SCMD_FLUSH, NULL) < 0)
+ goto SEND_FAILED;
+ if (sync_responses(sx, 2, 0) != 0)
+ {
+ HDEBUG(D_transport)
+ debug_printf("failed reaping pipelined cmd responses\n");
+ goto RESPONSE_FAILED;
+ }
+ sx->early_pipe_active = FALSE;
}
- sx->esmtp = FALSE;
}
-#ifdef EXPERIMENTAL_DSN_INFO
- sx->helo_response = string_copy(sx->buffer);
+ else
#endif
+ if (!smtp_reap_ehlo(sx))
+ goto RESPONSE_FAILED;
}
else
DEBUG(D_transport)
debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n");
- if (!sx->esmtp)
- {
- BOOL good_response;
- int n = sizeof(sx->buffer);
- uschar * rsp = sx->buffer;
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (!sx->early_pipe_active)
+#endif
+ if (!sx->esmtp)
+ {
+ BOOL good_response;
+ int n = sizeof(sx->buffer);
+ uschar * rsp = sx->buffer;
- if (sx->esmtp_sent && (n = Ustrlen(sx->buffer)) < sizeof(sx->buffer)/2)
- { rsp = sx->buffer + n + 1; n = sizeof(sx->buffer) - n; }
+ if (sx->esmtp_sent && (n = Ustrlen(sx->buffer)) < sizeof(sx->buffer)/2)
+ { rsp = sx->buffer + n + 1; n = sizeof(sx->buffer) - n; }
- if (smtp_write_command(&sx->outblock, FALSE, "HELO %s\r\n", sx->helo_data) < 0)
- goto SEND_FAILED;
- good_response = smtp_read_response(&sx->inblock, rsp, n,
- '2', sx->ob->command_timeout);
+ if (smtp_write_command(sx, SCMD_FLUSH, "HELO %s\r\n", sx->helo_data) < 0)
+ goto SEND_FAILED;
+ good_response = smtp_read_response(sx, rsp, n, '2', ob->command_timeout);
#ifdef EXPERIMENTAL_DSN_INFO
- sx->helo_response = string_copy(rsp);
+ sx->helo_response = string_copy(rsp);
#endif
- if (!good_response)
- {
- /* Handle special logging for a closed connection after HELO
- when had previously sent EHLO */
-
- if (rsp != sx->buffer && rsp[0] == 0 && (errno == 0 || errno == ECONNRESET))
+ if (!good_response)
{
- errno = ERRNO_SMTPCLOSED;
- goto EHLOHELO_FAILED;
+ /* Handle special logging for a closed connection after HELO
+ when had previously sent EHLO */
+
+ if (rsp != sx->buffer && rsp[0] == 0 && (errno == 0 || errno == ECONNRESET))
+ {
+ errno = ERRNO_SMTPCLOSED;
+ goto EHLOHELO_FAILED;
+ }
+ memmove(sx->buffer, rsp, Ustrlen(rsp));
+ goto RESPONSE_FAILED;
}
- Ustrncpy(sx->buffer, rsp, sizeof(sx->buffer)/2);
- goto RESPONSE_FAILED;
}
- }
-
- sx->peer_offered = smtp_peer_options = 0;
if (sx->esmtp || sx->lmtp)
{
- sx->peer_offered = ehlo_response(sx->buffer,
- PEER_OFFERED_TLS /* others checked later */
- );
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (!sx->early_pipe_active)
+#endif
+ {
+ sx->peer_offered = ehlo_response(sx->buffer,
+ OPTION_TLS /* others checked later */
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ | (sx->early_pipe_ok
+ ? OPTION_IGNQ
+ | OPTION_CHUNKING | OPTION_PRDR | OPTION_DSN | OPTION_PIPE | OPTION_SIZE
+#ifdef SUPPORT_I18N
+ | OPTION_UTF8
+#endif
+ | OPTION_EARLY_PIPE
+ : 0
+ )
+#endif
+ );
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (sx->early_pipe_ok)
+ {
+ sx->ehlo_resp.cleartext_features = sx->peer_offered;
+
+ if ( (sx->peer_offered & (OPTION_PIPE | OPTION_EARLY_PIPE))
+ == (OPTION_PIPE | OPTION_EARLY_PIPE))
+ {
+ DEBUG(D_transport) debug_printf("PIPE_CONNECT usable in future for this IP\n");
+ sx->ehlo_resp.cleartext_auths = study_ehlo_auths(sx);
+ write_ehlo_cache_entry(sx);
+ }
+ }
+#endif
+ }
/* Set tls_offered if the response to EHLO specifies support for STARTTLS. */
#ifdef SUPPORT_TLS
- smtp_peer_options |= sx->peer_offered & PEER_OFFERED_TLS;
+ smtp_peer_options |= sx->peer_offered & OPTION_TLS;
#endif
}
}
else
{
- if (cutthrough.fd >= 0 && cutthrough.callout_hold_only)
+ if (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only)
{
- sx->inblock.sock = sx->outblock.sock = cutthrough.fd;
- sx->host->port = sx->port = cutthrough.host.port;
+ sx->cctx = cutthrough.cctx;
+ sx->conn_args.host->port = sx->port = cutthrough.host.port;
}
else
{
- sx->inblock.sock = sx->outblock.sock = 0; /* stdin */
- sx->host->port = sx->port; /* Record the port that was used */
+ sx->cctx.sock = 0; /* stdin */
+ sx->cctx.tls_ctx = NULL;
+ smtp_port_for_connect(sx->conn_args.host, sx->port); /* Record the port that was used */
}
+ sx->inblock.cctx = sx->outblock.cctx = &sx->cctx;
smtp_command = big_buffer;
sx->helo_data = NULL; /* ensure we re-expand ob->helo_data */
held-open verify connection with TLS, nothing more to do. */
if ( continue_proxy_cipher
- || (cutthrough.fd >= 0 && cutthrough.callout_hold_only && cutthrough.is_tls)
+ || (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only
+ && cutthrough.is_tls)
)
{
sx->peer_offered = smtp_peer_options;
- pipelining_active = !!(smtp_peer_options & PEER_OFFERED_PIPE);
+ sx->pipelining_used = pipelining_active = !!(smtp_peer_options & OPTION_PIPE);
HDEBUG(D_transport) debug_printf("continued connection, %s TLS\n",
continue_proxy_cipher ? "proxied" : "verify conn with");
return OK;
for error analysis. */
#ifdef SUPPORT_TLS
-if ( smtp_peer_options & PEER_OFFERED_TLS
+if ( smtp_peer_options & OPTION_TLS
&& !suppress_tls
- && verify_check_given_host(&sx->ob->hosts_avoid_tls, sx->host) != OK
+ && verify_check_given_host(CUSS &ob->hosts_avoid_tls, sx->conn_args.host) != OK
&& ( !sx->verify
- || verify_check_given_host(&sx->ob->hosts_verify_avoid_tls, sx->host) != OK
+ || verify_check_given_host(CUSS &ob->hosts_verify_avoid_tls, sx->conn_args.host) != OK
) )
{
uschar buffer2[4096];
- if (smtp_write_command(&sx->outblock, FALSE, "STARTTLS\r\n") < 0)
+
+ if (smtp_write_command(sx, SCMD_FLUSH, "STARTTLS\r\n") < 0)
goto SEND_FAILED;
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ /* If doing early-pipelining reap the banner and EHLO-response but leave
+ the response for the STARTTLS we just sent alone. */
+
+ if (sx->early_pipe_active && sync_responses(sx, 2, 0) != 0)
+ {
+ HDEBUG(D_transport)
+ debug_printf("failed reaping pipelined cmd responses\n");
+ goto RESPONSE_FAILED;
+ }
+#endif
+
/* If there is an I/O error, transmission of this message is deferred. If
there is a temporary rejection of STARRTLS and tls_tempfail_tryclear is
false, we also defer. However, if there is a temporary rejection of STARTTLS
STARTTLS, we carry on. This means we will try to send the message in clear,
unless the host is in hosts_require_tls (tested below). */
- if (!smtp_read_response(&sx->inblock, buffer2, sizeof(buffer2), '2',
- sx->ob->command_timeout))
+ if (!smtp_read_response(sx, buffer2, sizeof(buffer2), '2', ob->command_timeout))
{
if ( errno != 0
|| buffer2[0] == 0
- || (buffer2[0] == '4' && !sx->ob->tls_tempfail_tryclear)
+ || (buffer2[0] == '4' && !ob->tls_tempfail_tryclear)
)
{
Ustrncpy(sx->buffer, buffer2, sizeof(sx->buffer));
{
address_item * addr;
uschar * errstr;
- int rc = tls_client_start(sx->inblock.sock, sx->host, sx->addrlist, sx->tblock,
-# ifdef EXPERIMENTAL_DANE
+ sx->cctx.tls_ctx = tls_client_start(sx->cctx.sock, sx->conn_args.host,
+ sx->addrlist, sx->conn_args.tblock,
+# ifdef SUPPORT_DANE
sx->dane ? &tlsa_dnsa : NULL,
# endif
- &errstr);
+ &tls_out, &errstr);
- /* TLS negotiation failed; give an error. From outside, this function may
- be called again to try in clear on a new connection, if the options permit
- it for this host. */
-
- if (rc != OK)
+ if (!sx->cctx.tls_ctx)
{
-# ifdef EXPERIMENTAL_DANE
- if (sx->dane) log_write(0, LOG_MAIN,
+ /* TLS negotiation failed; give an error. From outside, this function may
+ be called again to try in clear on a new connection, if the options permit
+ it for this host. */
+ DEBUG(D_tls) debug_printf("TLS session fail: %s\n", errstr);
+
+# ifdef SUPPORT_DANE
+ if (sx->dane)
+ {
+ log_write(0, LOG_MAIN,
"DANE attempt failed; TLS connection to %s [%s]: %s",
- sx->host->name, sx->host->address, errstr);
+ sx->conn_args.host->name, sx->conn_args.host->address, errstr);
+# ifndef DISABLE_EVENT
+ (void) event_raise(sx->conn_args.tblock->event_action,
+ US"dane:fail", US"validation-failure"); /* could do with better detail */
+# endif
+ }
# endif
errno = ERRNO_TLSFAILURE;
expand it here. $sending_ip_address and $sending_port are set up right at the
start of the Exim process (in exim.c). */
-if (tls_out.active >= 0)
+if (tls_out.active.sock >= 0)
{
- char *greeting_cmd;
- BOOL good_response;
+ uschar * greeting_cmd;
- if (!sx->helo_data && !(sx->helo_data = expand_string(sx->ob->helo_data)))
+ if (!sx->helo_data && !(sx->helo_data = expand_string(ob->helo_data)))
{
uschar *message = string_sprintf("failed to expand helo_data: %s",
expand_string_message);
goto SEND_QUIT;
}
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ /* For SMTPS there is no cleartext early-pipe; use the crypted permission bit.
+ We're unlikely to get the group sent and delivered before the server sends its
+ banner, but it's still worth sending as a group.
+ For STARTTLS allow for cleartext early-pipe but no crypted early-pipe, but not
+ the reverse. */
+
+ if (sx->smtps ? sx->early_pipe_ok : sx->early_pipe_active)
+ {
+ sx->peer_offered = sx->ehlo_resp.crypted_features;
+ if ((sx->early_pipe_active =
+ !!(sx->ehlo_resp.crypted_features & OPTION_EARLY_PIPE)))
+ DEBUG(D_transport) debug_printf("Using cached crypted PIPE_CONNECT\n");
+ }
+#endif
+
/* For SMTPS we need to wait for the initial OK response. */
if (sx->smtps)
- {
- good_response = smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer),
- '2', sx->ob->command_timeout);
-#ifdef EXPERIMENTAL_DSN_INFO
- sx->smtp_greeting = string_copy(sx->buffer);
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (sx->early_pipe_active)
+ {
+ sx->pending_BANNER = TRUE;
+ sx->outblock.cmd_count = 1;
+ }
+ else
#endif
- if (!good_response) goto RESPONSE_FAILED;
- }
+ if (!smtp_reap_banner(sx))
+ goto RESPONSE_FAILED;
- if (sx->esmtp)
- greeting_cmd = "EHLO";
+ if (sx->lmtp)
+ greeting_cmd = US"LHLO";
+ else if (sx->esmtp)
+ greeting_cmd = US"EHLO";
else
{
- greeting_cmd = "HELO";
+ greeting_cmd = US"HELO";
DEBUG(D_transport)
debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n");
}
- if (smtp_write_command(&sx->outblock, FALSE, "%s %s\r\n",
- sx->lmtp ? "LHLO" : greeting_cmd, sx->helo_data) < 0)
+ if (smtp_write_command(sx,
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ sx->early_pipe_active ? SCMD_BUFFER :
+#endif
+ SCMD_FLUSH,
+ "%s %s\r\n", greeting_cmd, sx->helo_data) < 0)
goto SEND_FAILED;
- good_response = smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer),
- '2', sx->ob->command_timeout);
-#ifdef EXPERIMENTAL_DSN_INFO
- sx->helo_response = string_copy(sx->buffer);
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (sx->early_pipe_active)
+ sx->pending_EHLO = TRUE;
+ else
#endif
- if (!good_response) goto RESPONSE_FAILED;
- smtp_peer_options = 0;
+ {
+ if (!smtp_reap_ehlo(sx))
+ goto RESPONSE_FAILED;
+ smtp_peer_options = 0;
+ }
}
/* If the host is required to use a secure channel, ensure that we
have one. */
else if ( sx->smtps
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
|| sx->dane
# endif
- || verify_check_given_host(&sx->ob->hosts_require_tls, sx->host) == OK
+# ifdef EXPERIMENTAL_REQUIRETLS
+ || tls_requiretls & REQUIRETLS_MSG
+# endif
+ || verify_check_given_host(CUSS &ob->hosts_require_tls, sx->conn_args.host) == OK
)
{
- errno = ERRNO_TLSREQUIRED;
+ errno =
+# ifdef EXPERIMENTAL_REQUIRETLS
+ tls_requiretls & REQUIRETLS_MSG ? ERRNO_REQUIRETLS :
+# endif
+ ERRNO_TLSREQUIRED;
message = string_sprintf("a TLS session is required, but %s",
- smtp_peer_options & PEER_OFFERED_TLS
+ smtp_peer_options & OPTION_TLS
? "an attempt to start TLS failed" : "the server did not offer TLS support");
+# if defined(SUPPORT_DANE) && !defined(DISABLE_EVENT)
+ if (sx->dane)
+ (void) event_raise(sx->conn_args.tblock->event_action, US"dane:fail",
+ smtp_peer_options & OPTION_TLS
+ ? US"validation-failure" /* could do with better detail */
+ : US"starttls-not-supported");
+# endif
goto TLS_FAILED;
}
#endif /*SUPPORT_TLS*/
if (continue_hostname == NULL
#ifdef SUPPORT_TLS
- || tls_out.active >= 0
+ || tls_out.active.sock >= 0
#endif
)
{
if (sx->esmtp || sx->lmtp)
{
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (!sx->early_pipe_active)
+#endif
+ {
sx->peer_offered = ehlo_response(sx->buffer,
0 /* no TLS */
- | (sx->lmtp && sx->ob->lmtp_ignore_quota ? PEER_OFFERED_IGNQ : 0)
- | PEER_OFFERED_CHUNKING
- | PEER_OFFERED_PRDR
-#ifdef SUPPORT_I18N
- | (sx->addrlist->prop.utf8_msg ? PEER_OFFERED_UTF8 : 0)
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ | (sx->lmtp && ob->lmtp_ignore_quota ? OPTION_IGNQ : 0)
+ | OPTION_DSN | OPTION_PIPE | OPTION_SIZE
+ | OPTION_CHUNKING | OPTION_PRDR | OPTION_UTF8 | OPTION_REQUIRETLS
+ | (tls_out.active.sock >= 0 ? OPTION_EARLY_PIPE : 0) /* not for lmtp */
+
+#else
+
+ | (sx->lmtp && ob->lmtp_ignore_quota ? OPTION_IGNQ : 0)
+ | OPTION_CHUNKING
+ | OPTION_PRDR
+# ifdef SUPPORT_I18N
+ | (sx->addrlist->prop.utf8_msg ? OPTION_UTF8 : 0)
/*XXX if we hand peercaps on to continued-conn processes,
must not depend on this addr */
+# endif
+ | OPTION_DSN
+ | OPTION_PIPE
+ | (ob->size_addition >= 0 ? OPTION_SIZE : 0)
+# if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS)
+ | (tls_requiretls & REQUIRETLS_MSG ? OPTION_REQUIRETLS : 0)
+# endif
#endif
- | PEER_OFFERED_DSN
- | PEER_OFFERED_PIPE
- | (sx->ob->size_addition >= 0 ? PEER_OFFERED_SIZE : 0)
);
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (tls_out.active.sock >= 0)
+ sx->ehlo_resp.crypted_features = sx->peer_offered;
+#endif
+ }
/* Set for IGNOREQUOTA if the response to LHLO specifies support and the
lmtp_ignore_quota option was set. */
- sx->igquotstr = sx->peer_offered & PEER_OFFERED_IGNQ ? US" IGNOREQUOTA" : US"";
+ sx->igquotstr = sx->peer_offered & OPTION_IGNQ ? US" IGNOREQUOTA" : US"";
/* If the response to EHLO specified support for the SIZE parameter, note
this, provided size_addition is non-negative. */
- smtp_peer_options |= sx->peer_offered & PEER_OFFERED_SIZE;
+ smtp_peer_options |= sx->peer_offered & OPTION_SIZE;
/* Note whether the server supports PIPELINING. If hosts_avoid_esmtp matched
the current host, esmtp will be false, so PIPELINING can never be used. If
the current host matches hosts_avoid_pipelining, don't do it. */
- if ( sx->peer_offered & PEER_OFFERED_PIPE
- && verify_check_given_host(&sx->ob->hosts_avoid_pipelining, sx->host) != OK)
- smtp_peer_options |= PEER_OFFERED_PIPE;
+ if ( sx->peer_offered & OPTION_PIPE
+ && verify_check_given_host(CUSS &ob->hosts_avoid_pipelining, sx->conn_args.host) != OK)
+ smtp_peer_options |= OPTION_PIPE;
DEBUG(D_transport) debug_printf("%susing PIPELINING\n",
- smtp_peer_options & PEER_OFFERED_PIPE ? "" : "not ");
+ smtp_peer_options & OPTION_PIPE ? "" : "not ");
- if ( sx->peer_offered & PEER_OFFERED_CHUNKING
- && verify_check_given_host(&sx->ob->hosts_try_chunking, sx->host) != OK)
- sx->peer_offered &= ~PEER_OFFERED_CHUNKING;
+ if ( sx->peer_offered & OPTION_CHUNKING
+ && verify_check_given_host(CUSS &ob->hosts_try_chunking, sx->conn_args.host) != OK)
+ sx->peer_offered &= ~OPTION_CHUNKING;
- if (sx->peer_offered & PEER_OFFERED_CHUNKING)
- {DEBUG(D_transport) debug_printf("CHUNKING usable\n");}
+ if (sx->peer_offered & OPTION_CHUNKING)
+ DEBUG(D_transport) debug_printf("CHUNKING usable\n");
#ifndef DISABLE_PRDR
- if ( sx->peer_offered & PEER_OFFERED_PRDR
- && verify_check_given_host(&sx->ob->hosts_try_prdr, sx->host) != OK)
- sx->peer_offered &= ~PEER_OFFERED_PRDR;
+ if ( sx->peer_offered & OPTION_PRDR
+ && verify_check_given_host(CUSS &ob->hosts_try_prdr, sx->conn_args.host) != OK)
+ sx->peer_offered &= ~OPTION_PRDR;
- if (sx->peer_offered & PEER_OFFERED_PRDR)
- {DEBUG(D_transport) debug_printf("PRDR usable\n");}
+ if (sx->peer_offered & OPTION_PRDR)
+ DEBUG(D_transport) debug_printf("PRDR usable\n");
#endif
/* Note if the server supports DSN */
- smtp_peer_options |= sx->peer_offered & PEER_OFFERED_DSN;
+ smtp_peer_options |= sx->peer_offered & OPTION_DSN;
DEBUG(D_transport) debug_printf("%susing DSN\n",
- sx->peer_offered & PEER_OFFERED_DSN ? "" : "not ");
+ sx->peer_offered & OPTION_DSN ? "" : "not ");
+
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS)
+ if (sx->peer_offered & OPTION_REQUIRETLS)
+ {
+ smtp_peer_options |= OPTION_REQUIRETLS;
+ DEBUG(D_transport) debug_printf(
+ tls_requiretls & REQUIRETLS_MSG
+ ? "using REQUIRETLS\n" : "REQUIRETLS offered\n");
+ }
+#endif
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if ( sx->early_pipe_ok
+ && !sx->early_pipe_active
+ && tls_out.active.sock >= 0
+ && smtp_peer_options & OPTION_PIPE
+ && ( sx->ehlo_resp.cleartext_features | sx->ehlo_resp.crypted_features)
+ & OPTION_EARLY_PIPE)
+ {
+ DEBUG(D_transport) debug_printf("PIPE_CONNECT usable in future for this IP\n");
+ sx->ehlo_resp.crypted_auths = study_ehlo_auths(sx);
+ write_ehlo_cache_entry(sx);
+ }
+#endif
/* Note if the response to EHLO specifies support for the AUTH extension.
If it has, check that this host is one we want to authenticate to, and do
the business. The host name and address must be available when the
authenticator's client driver is running. */
- switch (yield = smtp_auth(sx->buffer, sizeof(sx->buffer), sx->addrlist, sx->host,
- sx->ob, sx->esmtp, &sx->inblock, &sx->outblock))
+ switch (yield = smtp_auth(sx))
{
default: goto SEND_QUIT;
case OK: break;
}
}
}
-pipelining_active = !!(smtp_peer_options & PEER_OFFERED_PIPE);
+sx->pipelining_used = pipelining_active = !!(smtp_peer_options & OPTION_PIPE);
/* The setting up of the SMTP call is now complete. Any subsequent errors are
message-specific. */
#ifdef SUPPORT_I18N
if (sx->addrlist->prop.utf8_msg)
{
+ uschar * s;
+
+ /* If the transport sets a downconversion mode it overrides any set by ACL
+ for the message. */
+
+ if ((s = ob->utf8_downconvert))
+ {
+ if (!(s = expand_string(s)))
+ {
+ message = string_sprintf("failed to expand utf8_downconvert: %s",
+ expand_string_message);
+ set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE);
+ yield = DEFER;
+ goto SEND_QUIT;
+ }
+ switch (*s)
+ {
+ case '1': sx->addrlist->prop.utf8_downcvt = TRUE;
+ sx->addrlist->prop.utf8_downcvt_maybe = FALSE;
+ break;
+ case '0': sx->addrlist->prop.utf8_downcvt = FALSE;
+ sx->addrlist->prop.utf8_downcvt_maybe = FALSE;
+ break;
+ case '-': if (s[1] == '1')
+ {
+ sx->addrlist->prop.utf8_downcvt = FALSE;
+ sx->addrlist->prop.utf8_downcvt_maybe = TRUE;
+ }
+ break;
+ }
+ }
+
sx->utf8_needed = !sx->addrlist->prop.utf8_downcvt
&& !sx->addrlist->prop.utf8_downcvt_maybe;
DEBUG(D_transport) if (!sx->utf8_needed)
}
/* If this is an international message we need the host to speak SMTPUTF8 */
-if (sx->utf8_needed && !(sx->peer_offered & PEER_OFFERED_UTF8))
+if (sx->utf8_needed && !(sx->peer_offered & OPTION_UTF8))
{
errno = ERRNO_UTF8_FWD;
goto RESPONSE_FAILED;
}
+#endif /*SUPPORT_I18N*/
+
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS)
+ /*XXX should tls_requiretls actually be per-addr? */
+
+if ( tls_requiretls & REQUIRETLS_MSG
+ && !(sx->peer_offered & OPTION_REQUIRETLS)
+ )
+ {
+ sx->setting_up = TRUE;
+ errno = ERRNO_REQUIRETLS;
+ message = US"REQUIRETLS support is required from the server"
+ " but it was not offered";
+ DEBUG(D_transport) debug_printf("%s\n", message);
+ goto TLS_FAILED;
+ }
#endif
return OK;
RESPONSE_FAILED:
message = NULL;
- sx->send_quit = check_response(sx->host, &errno, sx->addrlist->more_errno,
+ sx->send_quit = check_response(sx->conn_args.host, &errno, sx->addrlist->more_errno,
sx->buffer, &code, &message, &pass_message);
+ yield = DEFER;
goto FAILED;
SEND_FAILED:
code = '4';
message = US string_sprintf("send() to %s [%s] failed: %s",
- sx->host->name, sx->host->address, strerror(errno));
+ sx->conn_args.host->name, sx->conn_args.host->address, strerror(errno));
sx->send_quit = FALSE;
+ yield = DEFER;
goto FAILED;
- /* This label is jumped to directly when a TLS negotiation has failed,
- or was not done for a host for which it is required. Values will be set
- in message and errno, and setting_up will always be true. Treat as
- a temporary error. */
-
EHLOHELO_FAILED:
code = '4';
message = string_sprintf("Remote host closed connection in response to %s"
" (EHLO response was: %s)", smtp_command, sx->buffer);
sx->send_quit = FALSE;
+ yield = DEFER;
goto FAILED;
+ /* This label is jumped to directly when a TLS negotiation has failed,
+ or was not done for a host for which it is required. Values will be set
+ in message and errno, and setting_up will always be true. Treat as
+ a temporary error. */
+
#ifdef SUPPORT_TLS
TLS_FAILED:
- code = '4';
+# ifdef EXPERIMENTAL_REQUIRETLS
+ if (errno == ERRNO_REQUIRETLS)
+ code = '5', yield = FAIL;
+ /*XXX DSN will be labelled 500; prefer 530 5.7.4 */
+ else
+# endif
+ code = '4', yield = DEFER;
goto FAILED;
#endif
/* The failure happened while setting up the call; see if the failure was
a 5xx response (this will either be on connection, or following HELO - a 5xx
- after EHLO causes it to try HELO). If so, fail all addresses, as this host is
- never going to accept them. For other errors during setting up (timeouts or
- whatever), defer all addresses, and yield DEFER, so that the host is not
- tried again for a while. */
+ after EHLO causes it to try HELO). If so, and there are no more hosts to try,
+ fail all addresses, as this host is never going to accept them. For other
+ errors during setting up (timeouts or whatever), defer all addresses, and
+ yield DEFER, so that the host is not tried again for a while.
+
+ XXX This peeking for another host feels like a layering violation. We want
+ to note the host as unusable, but down here we shouldn't know if this was
+ the last host to try for the addr(list). Perhaps the upper layer should be
+ the one to do set_errno() ? The problem is that currently the addr is where
+ errno etc. are stashed, but until we run out of hosts to try the errors are
+ host-specific. Maybe we should enhance the host_item definition? */
FAILED:
sx->ok = FALSE; /* For when reached by GOTO */
-
- yield = code == '5'
+ set_errno(sx->addrlist, errno, message,
+ sx->conn_args.host->next
+ ? DEFER
+ : code == '5'
#ifdef SUPPORT_I18N
- || errno == ERRNO_UTF8_FWD
+ || errno == ERRNO_UTF8_FWD
#endif
- ? FAIL : DEFER;
-
- set_errno(sx->addrlist, errno, message, yield, pass_message, sx->host
+ ? FAIL : DEFER,
+ pass_message, sx->conn_args.host
#ifdef EXPERIMENTAL_DSN_INFO
, sx->smtp_greeting, sx->helo_response
#endif
SEND_QUIT:
if (sx->send_quit)
- (void)smtp_write_command(&sx->outblock, FALSE, "QUIT\r\n");
+ (void)smtp_write_command(sx, SCMD_FLUSH, "QUIT\r\n");
#ifdef SUPPORT_TLS
-tls_close(FALSE, TRUE);
+if (sx->cctx.tls_ctx)
+ {
+ tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT);
+ sx->cctx.tls_ctx = NULL;
+ }
#endif
/* Close the socket, and return the appropriate value, first setting
works because the NULL setting is passed back to the calling process, and
remote_max_parallel is forced to 1 when delivering over an existing connection,
-
-If all went well and continue_more is set, we shouldn't actually get here if
-there are further addresses, as the return above will be taken. However,
-writing RSET might have failed, or there may be other addresses whose hosts are
-specified in the transports, and therefore not visible at top level, in which
-case continue_more won't get set. */
+*/
HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n");
if (sx->send_quit)
{
- shutdown(sx->outblock.sock, SHUT_WR);
- if (fcntl(sx->inblock.sock, F_SETFL, O_NONBLOCK) == 0)
- for (rc = 16; read(sx->inblock.sock, sx->inbuffer, sizeof(sx->inbuffer)) > 0 && rc > 0;)
+ shutdown(sx->cctx.sock, SHUT_WR);
+ if (fcntl(sx->cctx.sock, F_SETFL, O_NONBLOCK) == 0)
+ for (rc = 16; read(sx->cctx.sock, sx->inbuffer, sizeof(sx->inbuffer)) > 0 && rc > 0;)
rc--; /* drain socket */
sx->send_quit = FALSE;
}
-(void)close(sx->inblock.sock);
-sx->inblock.sock = sx->outblock.sock = -1;
+(void)close(sx->cctx.sock);
+sx->cctx.sock = -1;
#ifndef DISABLE_EVENT
-(void) event_raise(sx->tblock->event_action, US"tcp:close", NULL);
+(void) event_raise(sx->conn_args.tblock->event_action, US"tcp:close", NULL);
#endif
continue_transport = NULL;
*p = 0;
-/* If we know the receiving MTA supports the SIZE qualification,
+/* If we know the receiving MTA supports the SIZE qualification, and we know it,
send it, adding something to the message size to allow for imprecision
and things that get added en route. Exim keeps the number of lines
in a message, so we can give an accurate value for the original message, but we
need some additional to handle added headers. (Double "." characters don't get
included in the count.) */
-if (sx->peer_offered & PEER_OFFERED_SIZE)
+if ( message_size > 0
+ && sx->peer_offered & OPTION_SIZE && !(sx->avoid_option & OPTION_SIZE))
{
- sprintf(CS p, " SIZE=%d", message_size+message_linecount+sx->ob->size_addition);
+/*XXX problem here under spool_files_wireformat?
+Or just forget about lines? Or inflate by a fixed proportion? */
+
+ sprintf(CS p, " SIZE=%d", message_size+message_linecount+(SOB sx->conn_args.ob)->size_addition);
while (*p) p++;
}
request that */
sx->prdr_active = FALSE;
-if (sx->peer_offered & PEER_OFFERED_PRDR)
+if (sx->peer_offered & OPTION_PRDR)
for (addr = addrlist; addr; addr = addr->next)
if (addr->transport_return == PENDING_DEFER)
{
/* If it supports internationalised messages, and this meesage need that,
request it */
-if ( sx->peer_offered & PEER_OFFERED_UTF8
+if ( sx->peer_offered & OPTION_UTF8
&& addrlist->prop.utf8_msg
&& !addrlist->prop.utf8_downcvt
)
Ustrcpy(p, " SMTPUTF8"), p += 9;
#endif
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS)
+if (tls_requiretls & REQUIRETLS_MSG)
+ Ustrcpy(p, " REQUIRETLS") , p += 11;
+#endif
+
/* check if all addresses have DSN-lasthop flag; do not send RET and ENVID if so */
for (sx->dsn_all_lasthop = TRUE, addr = addrlist, address_count = 0;
addr && address_count < sx->max_rcpt;
/* Add any DSN flags to the mail command */
-if (sx->peer_offered & PEER_OFFERED_DSN && !sx->dsn_all_lasthop)
+if (sx->peer_offered & OPTION_DSN && !sx->dsn_all_lasthop)
{
if (dsn_ret == dsn_ret_hdrs)
{ Ustrcpy(p, " RET=HDRS"); p += 9; }
otherwise no check - this feature is expected to be used with LMTP and other
cases where non-standard addresses (e.g. without domains) might be required. */
-if (smtp_mail_auth_str(p, sizeof(sx->buffer) - (p-sx->buffer), addrlist, sx->ob))
+if (smtp_mail_auth_str(p, sizeof(sx->buffer) - (p-sx->buffer), addrlist, sx->conn_args.ob))
return ERROR;
return OK;
/* Add any DSN flags to the rcpt command */
-if (sx->peer_offered & PEER_OFFERED_DSN && !(addr->dsn_flags & rf_dsnlasthop))
+if (sx->peer_offered & OPTION_DSN && !(addr->dsn_flags & rf_dsnlasthop))
{
if (addr->dsn_flags & rf_dsnflags)
{
the delivery log line. */
if ( sx->addrlist->prop.utf8_msg
- && (sx->addrlist->prop.utf8_downcvt || !(sx->peer_offered & PEER_OFFERED_UTF8))
+ && (sx->addrlist->prop.utf8_downcvt || !(sx->peer_offered & OPTION_UTF8))
)
{
if (s = string_address_utf8_to_alabel(s, &errstr), errstr)
}
#endif
- rc = smtp_write_command(&sx->outblock, pipelining_active,
+ rc = smtp_write_command(sx, pipelining_active ? SCMD_BUFFER : SCMD_FLUSH,
"MAIL FROM:<%s>%s\r\n", s, sx->buffer);
}
return -5;
case +1: /* Cmd was sent */
- if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '2',
- sx->ob->command_timeout))
+ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
+ (SOB sx->conn_args.ob)->command_timeout))
{
if (errno == 0 && sx->buffer[0] == '4')
{
BOOL no_flush;
uschar * rcpt_addr;
- addr->dsn_aware = sx->peer_offered & PEER_OFFERED_DSN
+ addr->dsn_aware = sx->peer_offered & OPTION_DSN
? dsn_support_yes : dsn_support_no;
address_count++;
yield as OK, because this error can often mean that there is a problem with
just one address, so we don't want to delay the host. */
- rcpt_addr = transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes);
+ rcpt_addr = transport_rcpt_address(addr, sx->conn_args.tblock->rcpt_include_affixes);
#ifdef SUPPORT_I18N
if ( testflag(sx->addrlist, af_utf8_downcvt)
}
#endif
- count = smtp_write_command(&sx->outblock, no_flush, "RCPT TO:<%s>%s%s\r\n",
- rcpt_addr, sx->igquotstr, sx->buffer);
+ count = smtp_write_command(sx, no_flush ? SCMD_BUFFER : SCMD_FLUSH,
+ "RCPT TO:<%s>%s%s\r\n", rcpt_addr, sx->igquotstr, sx->buffer);
if (count < 0) return -5;
if (count > 0)
case -1: return -3; /* Timeout on RCPT */
case -2: return -2; /* non-MAIL read i/o error */
default: return -1; /* any MAIL error */
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ case -4: return -1; /* non-2xx for pipelined banner or EHLO */
+#endif
}
sx->pending_MAIL = FALSE; /* Dealt with MAIL */
}
* Proxy TLS connection for another transport process *
******************************************************/
/*
-Use the given buffer as a staging area, and select on both the given fd
-and the TLS'd client-fd for data to read (per the coding in ip_recv() and
-fd_ready() this is legitimate). Do blocking full-size writes, and reads
-under a timeout.
+Close the unused end of the pipe, fork once more, then use the given buffer
+as a staging area, and select on both the given fd and the TLS'd client-fd for
+data to read (per the coding in ip_recv() and fd_ready() this is legitimate).
+Do blocking full-size writes, and reads under a timeout. Once both input
+channels are closed, exit the process.
Arguments:
+ ct_ctx tls context
buf space to use for buffering
bufsiz size of buffer
- proxy_fd comms to proxied process
+ pfd pipe filedescriptor array; [0] is comms to proxied process
timeout per-read timeout, seconds
*/
void
-smtp_proxy_tls(uschar * buf, size_t bsize, int proxy_fd, int timeout)
+smtp_proxy_tls(void * ct_ctx, uschar * buf, size_t bsize, int * pfd,
+ int timeout)
{
-fd_set fds;
-int max_fd = MAX(proxy_fd, tls_out.active) + 1;
+fd_set rfds, efds;
+int max_fd = MAX(pfd[0], tls_out.active.sock) + 1;
int rc, i, fd_bits, nbytes;
+close(pfd[1]);
+if ((rc = fork()))
+ {
+ DEBUG(D_transport) debug_printf("proxy-proc final-pid %d\n", rc);
+ _exit(rc < 0 ? EXIT_FAILURE : EXIT_SUCCESS);
+ }
+
+if (f.running_in_test_harness) millisleep(100); /* let parent debug out */
set_process_info("proxying TLS connection for continued transport");
-FD_ZERO(&fds);
-FD_SET(tls_out.active, &fds);
-FD_SET(proxy_fd, &fds);
+FD_ZERO(&rfds);
+FD_SET(tls_out.active.sock, &rfds);
+FD_SET(pfd[0], &rfds);
for (fd_bits = 3; fd_bits; )
{
time_t time_start = time(NULL);
/* wait for data */
+ efds = rfds;
do
{
struct timeval tv = { time_left, 0 };
- rc = select(max_fd, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &tv);
+ rc = select(max_fd,
+ (SELECT_ARG2_TYPE *)&rfds, NULL, (SELECT_ARG2_TYPE *)&efds, &tv);
if (rc < 0 && errno == EINTR)
if ((time_left -= time(NULL) - time_start) > 0) continue;
if (rc <= 0)
{
DEBUG(D_transport) if (rc == 0) debug_printf("%s: timed out\n", __FUNCTION__);
- return;
+ goto done;
+ }
+
+ if (FD_ISSET(tls_out.active.sock, &efds) || FD_ISSET(pfd[0], &efds))
+ {
+ DEBUG(D_transport) debug_printf("select: exceptional cond on %s fd\n",
+ FD_ISSET(pfd[0], &efds) ? "proxy" : "tls");
+ goto done;
}
}
- while (rc < 0 || !(FD_ISSET(tls_out.active, &fds) || FD_ISSET(proxy_fd, &fds)));
+ while (rc < 0 || !(FD_ISSET(tls_out.active.sock, &rfds) || FD_ISSET(pfd[0], &rfds)));
/* handle inbound data */
- if (FD_ISSET(tls_out.active, &fds))
- if ((rc = tls_read(FALSE, buf, bsize)) <= 0)
+ if (FD_ISSET(tls_out.active.sock, &rfds))
+ if ((rc = tls_read(ct_ctx, buf, bsize)) <= 0)
{
fd_bits &= ~1;
- FD_CLR(tls_out.active, &fds);
- shutdown(proxy_fd, SHUT_WR);
+ FD_CLR(tls_out.active.sock, &rfds);
+ shutdown(pfd[0], SHUT_WR);
+ timeout = 5;
}
else
{
for (nbytes = 0; rc - nbytes > 0; nbytes += i)
- if ((i = write(proxy_fd, buf + nbytes, rc - nbytes)) < 0) return;
+ if ((i = write(pfd[0], buf + nbytes, rc - nbytes)) < 0) goto done;
}
else if (fd_bits & 1)
- FD_SET(tls_out.active, &fds);
+ FD_SET(tls_out.active.sock, &rfds);
/* handle outbound data */
- if (FD_ISSET(proxy_fd, &fds))
- if ((rc = read(proxy_fd, buf, bsize)) <= 0)
+ if (FD_ISSET(pfd[0], &rfds))
+ if ((rc = read(pfd[0], buf, bsize)) <= 0)
{
- fd_bits &= ~2;
- FD_CLR(proxy_fd, &fds);
- shutdown(tls_out.active, SHUT_WR);
+ fd_bits = 0;
+ tls_close(ct_ctx, TLS_SHUTDOWN_NOWAIT);
+ ct_ctx = NULL;
}
else
{
for (nbytes = 0; rc - nbytes > 0; nbytes += i)
- if ((i = tls_write(FALSE, buf + nbytes, rc - nbytes)) < 0) return;
+ if ((i = tls_write(ct_ctx, buf + nbytes, rc - nbytes, FALSE)) < 0)
+ goto done;
}
else if (fd_bits & 2)
- FD_SET(proxy_fd, &fds);
+ FD_SET(pfd[0], &rfds);
}
+
+done:
+ if (f.running_in_test_harness) millisleep(100); /* let logging complete */
+ exim_exit(0, US"TLS proxy");
}
#endif
failed by one of them.
host host to deliver to
host_af AF_INET or AF_INET6
- port default TCP/IP port to use, in host byte order
+ defport default TCP/IP port to use if host does not specify, in host
+ byte order
interface interface to bind to, or NULL
tblock transport instance block
message_defer set TRUE if yield is OK, but all addresses were deferred
*/
static int
-smtp_deliver(address_item *addrlist, host_item *host, int host_af, int port,
+smtp_deliver(address_item *addrlist, host_item *host, int host_af, int defport,
uschar *interface, transport_instance *tblock,
BOOL *message_defer, BOOL suppress_tls)
{
address_item *addr;
+smtp_transport_options_block * ob = SOB tblock->options_block;
int yield = OK;
int save_errno;
int rc;
-time_t start_delivery_time = time(NULL);
+struct timeval start_delivery_time;
BOOL pass_message = FALSE;
uschar *message = NULL;
uschar new_message_id[MESSAGE_ID_LENGTH + 1];
-uschar *p;
smtp_context sx;
+gettimeofday(&start_delivery_time, NULL);
suppress_tls = suppress_tls; /* stop compiler warning when no TLS support */
*message_defer = FALSE;
sx.addrlist = addrlist;
-sx.host = host;
-sx.host_af = host_af,
-sx.port = port;
-sx.interface = interface;
+sx.conn_args.host = host;
+sx.conn_args.host_af = host_af,
+sx.port = defport;
+sx.conn_args.interface = interface;
sx.helo_data = NULL;
-sx.tblock = tblock;
+sx.conn_args.tblock = tblock;
sx.verify = FALSE;
+sx.sync_addr = sx.first_addr = addrlist;
/* Get the channel set up ready for a message (MAIL FROM being the next
SMTP command to send */
if ( transport_filter_argv
&& *transport_filter_argv
&& **transport_filter_argv
- && sx.peer_offered & PEER_OFFERED_CHUNKING
+ && sx.peer_offered & OPTION_CHUNKING
)
{
- sx.peer_offered &= ~PEER_OFFERED_CHUNKING;
+ sx.peer_offered &= ~OPTION_CHUNKING;
DEBUG(D_transport) debug_printf("CHUNKING not usable due to transport filter\n");
}
}
-sx.first_addr = addrlist;
-
/* For messages that have more than the maximum number of envelope recipients,
we want to send several transactions down the same SMTP connection. (See
comments in deliver.c as to how this reconciles, heuristically, with
If using CHUNKING, do not send a BDAT until we know how big a chunk we want
to send is. */
-if ( !(sx.peer_offered & PEER_OFFERED_CHUNKING)
+if ( !(sx.peer_offered & OPTION_CHUNKING)
&& (sx.ok || (pipelining_active && !mua_wrapper)))
{
- int count = smtp_write_command(&sx.outblock, FALSE, "DATA\r\n");
+ int count = smtp_write_command(&sx, SCMD_FLUSH, "DATA\r\n");
if (count < 0) goto SEND_FAILED;
switch(sync_responses(&sx, count, sx.ok ? +1 : -1))
case 0: break; /* No 2xx or 5xx, but no probs */
case -1: goto END_OFF; /* Timeout on RCPT */
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ case -4: HDEBUG(D_transport)
+ debug_printf("failed reaping pipelined cmd responses\n");
+#endif
default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */
}
pipelining_active = FALSE;
well as body. Set the appropriate timeout value to be used for each chunk.
(Haven't been able to make it work using select() for writing yet.) */
-if (!(sx.peer_offered & PEER_OFFERED_CHUNKING) && !sx.ok)
+if (!(sx.peer_offered & OPTION_CHUNKING) && !sx.ok)
{
/* Save the first address of the next batch. */
sx.first_addr = sx.next_addr;
else
{
transport_ctx tctx = {
- tblock,
- addrlist,
- US".", US"..", /* Escaping strings */
- topt_use_crlf | topt_escape_headers
+ .u = {.fd = sx.cctx.sock}, /*XXX will this need TLS info? */
+ .tblock = tblock,
+ .addr = addrlist,
+ .check_string = US".",
+ .escape_string = US"..", /* Escaping strings */
+ .options =
+ topt_use_crlf | topt_escape_headers
| (tblock->body_only ? topt_no_headers : 0)
| (tblock->headers_only ? topt_no_body : 0)
| (tblock->return_path_add ? topt_add_return_path : 0)
of responses. The callback needs a whole bunch of state so set up
a transport-context structure to be passed around. */
- if (sx.peer_offered & PEER_OFFERED_CHUNKING)
+ if (sx.peer_offered & OPTION_CHUNKING)
{
tctx.check_string = tctx.escape_string = NULL;
tctx.options |= topt_use_bdat;
sx.buffer[0] = 0;
sigalrm_seen = FALSE;
- transport_write_timeout = sx.ob->data_timeout;
+ transport_write_timeout = ob->data_timeout;
smtp_command = US"sending data block"; /* For error messages */
DEBUG(D_transport|D_v)
- if (sx.peer_offered & PEER_OFFERED_CHUNKING)
+ if (sx.peer_offered & OPTION_CHUNKING)
debug_printf(" will write message using CHUNKING\n");
else
debug_printf(" SMTP>> writing message and terminating \".\"\n");
transport_count = 0;
#ifndef DISABLE_DKIM
- sx.ok = dkim_transport_write_message(sx.inblock.sock, &tctx, &sx.ob->dkim,
- CUSS &message);
+ dkim_exim_sign_init();
+# ifdef EXPERIMENTAL_ARC
+ {
+ uschar * s = ob->arc_sign;
+ if (s)
+ {
+ if (!(ob->dkim.arc_signspec = s = expand_string(s)))
+ {
+ if (!f.expand_string_forcedfail)
+ {
+ message = US"failed to expand arc_sign";
+ sx.ok = FALSE;
+ goto SEND_FAILED;
+ }
+ }
+ else if (*s)
+ {
+ /* Ask dkim code to hash the body for ARC */
+ (void) arc_ams_setup_sign_bodyhash();
+ ob->dkim.force_bodyhash = TRUE;
+ }
+ }
+ }
+# endif
+ sx.ok = dkim_transport_write_message(&tctx, &ob->dkim, CUSS &message);
#else
- sx.ok = transport_write_message(sx.inblock.sock, &tctx, 0);
+ sx.ok = transport_write_message(&tctx, 0);
#endif
/* transport_write_message() uses write() because it is called from other
smtp_command = US"end of data";
- if (sx.peer_offered & PEER_OFFERED_CHUNKING && sx.cmd_count > 1)
+ if (sx.peer_offered & OPTION_CHUNKING && sx.cmd_count > 1)
{
/* Reap any outstanding MAIL & RCPT commands, but not a DATA-go-ahead */
switch(sync_responses(&sx, sx.cmd_count-1, 0))
case 0: break; /* No 2xx or 5xx, but no probs */
case -1: goto END_OFF; /* Timeout on RCPT */
+
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ case -4: HDEBUG(D_transport)
+ debug_printf("failed reaping pipelined cmd responses\n");
+#endif
default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */
}
}
#ifndef DISABLE_PRDR
- /* For PRDR we optionally get a partial-responses warning
- * followed by the individual responses, before going on with
- * the overall response. If we don't get the warning then deal
- * with per non-PRDR. */
+ /* For PRDR we optionally get a partial-responses warning followed by the
+ individual responses, before going on with the overall response. If we don't
+ get the warning then deal with per non-PRDR. */
+
if(sx.prdr_active)
{
- sx.ok = smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer), '3',
- sx.ob->final_timeout);
+ sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '3', ob->final_timeout);
if (!sx.ok && errno == 0) switch(sx.buffer[0])
{
case '2': sx.prdr_active = FALSE;
if (!sx.lmtp)
{
- sx.ok = smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer), '2',
- sx.ob->final_timeout);
+ sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '2',
+ ob->final_timeout);
if (!sx.ok && errno == 0 && sx.buffer[0] == '4')
{
errno = ERRNO_DATA4XX;
if (sx.ok)
{
int flag = '=';
- int delivery_time = (int)(time(NULL) - start_delivery_time);
+ struct timeval delivery_time;
int len;
- uschar *conf = NULL;
+ uschar * conf = NULL;
+ timesince(&delivery_time, &start_delivery_time);
sx.send_rset = FALSE;
pipelining_active = FALSE;
{
const uschar *s = string_printing(sx.buffer);
/* deconst cast ok here as string_printing was checked to have alloc'n'copied */
- conf = (s == sx.buffer)? (uschar *)string_copy(s) : US s;
+ conf = (s == sx.buffer)? US string_copy(s) : US s;
}
/* Process all transported addresses - for LMTP or PRDR, read a status for
if (sx.lmtp)
#endif
{
- if (!smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer), '2',
- sx.ob->final_timeout))
+ if (!smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '2',
+ ob->final_timeout))
{
if (errno != 0 || sx.buffer[0] == 0) goto RESPONSE_FAILED;
addr->message = string_sprintf(
actual host that was used. */
addr->transport_return = OK;
- addr->more_errno = delivery_time;
+ addr->more_errno = delivery_time.tv_sec;
+ addr->delivery_usec = delivery_time.tv_usec;
addr->host_used = host;
addr->special_action = flag;
addr->message = conf;
+
+ if (tcp_out_fastopen)
+ {
+ setflag(addr, af_tcp_fastopen_conn);
+ if (tcp_out_fastopen >= TFO_USED_NODATA) setflag(addr, af_tcp_fastopen);
+ if (tcp_out_fastopen >= TFO_USED_DATA) setflag(addr, af_tcp_fastopen_data);
+ }
+ if (sx.pipelining_used) setflag(addr, af_pipelining);
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ if (sx.early_pipe_active) setflag(addr, af_early_pipe);
+#endif
#ifndef DISABLE_PRDR
- if (sx.prdr_active) addr->flags |= af_prdr_used;
+ if (sx.prdr_active) setflag(addr, af_prdr_used);
#endif
- if (sx.peer_offered & PEER_OFFERED_CHUNKING) addr->flags |= af_chunking_used;
+ if (sx.peer_offered & OPTION_CHUNKING) setflag(addr, af_chunking_used);
flag = '-';
#ifndef DISABLE_PRDR
#ifndef DISABLE_PRDR
if (sx.prdr_active)
{
+ const uschar * overall_message;
+
/* PRDR - get the final, overall response. For any non-success
upgrade all the address statuses. */
- sx.ok = smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer), '2',
- sx.ob->final_timeout);
+
+ sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer), '2',
+ ob->final_timeout);
if (!sx.ok)
{
if(errno == 0 && sx.buffer[0] == '4')
goto RESPONSE_FAILED;
}
- /* Update the journal, or setup retry. */
+ /* Append the overall response to the individual PRDR response for logging
+ and update the journal, or setup retry. */
+
+ overall_message = string_printing(sx.buffer);
+ for (addr = addrlist; addr != sx.first_addr; addr = addr->next)
+ if (addr->transport_return == OK)
+ addr->message = string_sprintf("%s\\n%s", addr->message, overall_message);
+
for (addr = addrlist; addr != sx.first_addr; addr = addr->next)
if (addr->transport_return == OK)
{
set_rc = DEFER;
if (save_errno > 0)
message = US string_sprintf("%s: %s", message, strerror(save_errno));
- if (host->next != NULL) log_write(0, LOG_MAIN, "%s", message);
- msglog_line(host, message);
+
+ write_logs(host, message, sx.first_addr ? sx.first_addr->basic_errno : 0);
+
*message_defer = TRUE;
}
}
else
{
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ /* If we were early-pipelinng and the actual EHLO response did not match
+ the cached value we assumed, we could have detected it and passed a
+ custom errno through to here. It would be nice to RSET and retry right
+ away, but to reliably do that we eould need an extra synch point before
+ we committed to data and that would discard half the gained roundrips.
+ Or we could summarily drop the TCP connection. but that is also ugly.
+ Instead, we ignore the possibility (having freshened the cache) and rely
+ on the server telling us with a nonmessage error if we have tried to
+ do something it no longer supports. */
+#endif
set_rc = DEFER;
yield = (save_errno == ERRNO_CHHEADER_FAIL ||
- save_errno == ERRNO_FILTER_FAIL)? ERROR : DEFER;
+ save_errno == ERRNO_FILTER_FAIL) ? ERROR : DEFER;
}
}
DEBUG(D_transport)
debug_printf("ok=%d send_quit=%d send_rset=%d continue_more=%d "
"yield=%d first_address is %sNULL\n", sx.ok, sx.send_quit,
- sx.send_rset, continue_more, yield, sx.first_addr ? "not " : "");
+ sx.send_rset, f.continue_more, yield, sx.first_addr ? "not " : "");
if (sx.completed_addr && sx.ok && sx.send_quit)
{
t_compare.current_sender_address = sender_address;
if ( sx.first_addr != NULL
- || continue_more
+ || f.continue_more
|| (
#ifdef SUPPORT_TLS
- ( tls_out.active < 0 && !continue_proxy_cipher
- || verify_check_given_host(&sx.ob->hosts_nopass_tls, host) != OK
+ ( tls_out.active.sock < 0 && !continue_proxy_cipher
+ || verify_check_given_host(CUSS &ob->hosts_nopass_tls, host) != OK
)
&&
#endif
BOOL pass_message;
if (sx.send_rset)
- if (! (sx.ok = smtp_write_command(&sx.outblock, FALSE, "RSET\r\n") >= 0))
+ if (! (sx.ok = smtp_write_command(&sx, SCMD_FLUSH, "RSET\r\n") >= 0))
{
msg = US string_sprintf("send() to %s [%s] failed: %s", host->name,
host->address, strerror(errno));
sx.send_quit = FALSE;
}
- else if (! (sx.ok = smtp_read_response(&sx.inblock, sx.buffer,
- sizeof(sx.buffer), '2', sx.ob->command_timeout)))
+ else if (! (sx.ok = smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer),
+ '2', ob->command_timeout)))
{
int code;
sx.send_quit = check_response(host, &errno, 0, sx.buffer, &code, &msg,
if (sx.ok)
{
+#ifdef SUPPORT_TLS
int pfd[2];
- int socket_fd = sx.inblock.sock;
+#endif
+ int socket_fd = sx.cctx.sock;
if (sx.first_addr != NULL) /* More addresses still to be sent */
continue_sequence++; /* Causes * in logging */
goto SEND_MESSAGE;
}
- if (continue_more) return yield; /* More addresses for another run */
- /* Pass the connection on to a new Exim process. */
+ /* Unless caller said it already has more messages listed for this host,
+ pass the connection on to a new Exim process (below, the call to
+ transport_pass_socket). If the caller has more ready, just return with
+ the connection still open. */
+
#ifdef SUPPORT_TLS
- if (tls_out.active >= 0)
- if (verify_check_given_host(&sx.ob->hosts_noproxy_tls, host) == OK)
+ if (tls_out.active.sock >= 0)
+ if ( f.continue_more
+ || verify_check_given_host(CUSS &ob->hosts_noproxy_tls, host) == OK)
{
- /* Pass the socket, for direct use, to a new Exim process. Before
- doing so, we must shut down TLS. Not all MTAs allow for the
- continuation of the SMTP session when TLS is shut down. We test for
- this by sending a new EHLO. If we don't get a good response, we don't
- attempt to pass the socket on. */
-
- tls_close(FALSE, TRUE);
+ /* Before passing the socket on, or returning to caller with it still
+ open, we must shut down TLS. Not all MTAs allow for the continuation
+ of the SMTP session when TLS is shut down. We test for this by sending
+ a new EHLO. If we don't get a good response, we don't attempt to pass
+ the socket on. */
+
+ tls_close(sx.cctx.tls_ctx, TLS_SHUTDOWN_WAIT);
+ sx.cctx.tls_ctx = NULL;
smtp_peer_options = smtp_peer_options_wrap;
sx.ok = !sx.smtps
- && smtp_write_command(&sx.outblock, FALSE,
- "EHLO %s\r\n", sx.helo_data) >= 0
- && smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer),
- '2', sx.ob->command_timeout);
+ && smtp_write_command(&sx, SCMD_FLUSH, "EHLO %s\r\n", sx.helo_data)
+ >= 0
+ && smtp_read_response(&sx, sx.buffer, sizeof(sx.buffer),
+ '2', ob->command_timeout);
+
+ if (sx.ok && f.continue_more)
+ return yield; /* More addresses for another run */
}
else
{
/* Set up a pipe for proxying TLS for the new transport process */
- smtp_peer_options |= PEER_OFFERED_TLS;
+ smtp_peer_options |= OPTION_TLS;
if (sx.ok = (socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) == 0))
socket_fd = pfd[1];
else
# endif
);
}
+ else
#endif
+ if (f.continue_more)
+ return yield; /* More addresses for another run */
/* If the socket is successfully passed, we mustn't send QUIT (or
indeed anything!) from here. */
{
sx.send_quit = FALSE;
- /* If TLS is still active, we need to proxy it for the transport we
+ /* We have passed the client socket to a fresh transport process.
+ If TLS is still active, we need to proxy it for the transport we
just passed the baton to. Fork a child to to do it, and return to
get logging done asap. Which way to place the work makes assumptions
about post-fork prioritisation which may not hold on all platforms. */
#ifdef SUPPORT_TLS
- if (tls_out.active >= 0)
+ if (tls_out.active.sock >= 0)
{
int pid = fork();
+ if (pid == 0) /* child; fork again to disconnect totally */
+ {
+ if (f.running_in_test_harness) millisleep(100); /* let parent debug out */
+ /* does not return */
+ smtp_proxy_tls(sx.cctx.tls_ctx, sx.buffer, sizeof(sx.buffer), pfd,
+ ob->command_timeout);
+ }
+
if (pid > 0) /* parent */
{
+ DEBUG(D_transport) debug_printf("proxy-proc inter-pid %d\n", pid);
+ close(pfd[0]);
+ /* tidy the inter-proc to disconn the proxy proc */
waitpid(pid, NULL, 0);
- tls_close(FALSE, FALSE);
- (void)close(sx.inblock.sock);
+ tls_close(sx.cctx.tls_ctx, TLS_NO_SHUTDOWN);
+ sx.cctx.tls_ctx = NULL;
+ (void)close(sx.cctx.sock);
+ sx.cctx.sock = -1;
continue_transport = NULL;
continue_hostname = NULL;
return yield;
}
- else if (pid == 0) /* child; fork again to disconnect totally */
- {
- if ((pid = fork()))
- _exit(pid ? EXIT_FAILURE : EXIT_SUCCESS);
- smtp_proxy_tls(sx.buffer, sizeof(sx.buffer), pfd[0], sx.ob->command_timeout);
- exim_exit(0);
- }
+ log_write(0, LOG_PANIC_DIE, "fork failed");
}
#endif
}
operation, the old commented-out code was removed on 17-Sep-99. */
SEND_QUIT:
-if (sx.send_quit) (void)smtp_write_command(&sx.outblock, FALSE, "QUIT\r\n");
+if (sx.send_quit) (void)smtp_write_command(&sx, SCMD_FLUSH, "QUIT\r\n");
END_OFF:
#ifdef SUPPORT_TLS
-tls_close(FALSE, TRUE);
+tls_close(sx.cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT);
+sx.cctx.tls_ctx = NULL;
#endif
/* Close the socket, and return the appropriate value, first setting
HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n");
if (sx.send_quit)
{
- shutdown(sx.outblock.sock, SHUT_WR);
- if (fcntl(sx.inblock.sock, F_SETFL, O_NONBLOCK) == 0)
- for (rc = 16; read(sx.inblock.sock, sx.inbuffer, sizeof(sx.inbuffer)) > 0 && rc > 0;)
+ shutdown(sx.cctx.sock, SHUT_WR);
+ millisleep(f.running_in_test_harness ? 200 : 20);
+ if (fcntl(sx.cctx.sock, F_SETFL, O_NONBLOCK) == 0)
+ for (rc = 16; read(sx.cctx.sock, sx.inbuffer, sizeof(sx.inbuffer)) > 0 && rc > 0;)
rc--; /* drain socket */
}
-(void)close(sx.inblock.sock);
+(void)close(sx.cctx.sock);
#ifndef DISABLE_EVENT
(void) event_raise(tblock->event_action, US"tcp:close", NULL);
void
smtp_transport_closedown(transport_instance *tblock)
{
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)tblock->options_block;
-smtp_inblock inblock;
-smtp_outblock outblock;
+smtp_transport_options_block * ob = SOB tblock->options_block;
+client_conn_ctx cctx;
+smtp_context sx;
uschar buffer[256];
uschar inbuffer[4096];
uschar outbuffer[16];
-inblock.sock = fileno(stdin);
-inblock.buffer = inbuffer;
-inblock.buffersize = sizeof(inbuffer);
-inblock.ptr = inbuffer;
-inblock.ptrend = inbuffer;
-
-outblock.sock = inblock.sock;
-outblock.buffersize = sizeof(outbuffer);
-outblock.buffer = outbuffer;
-outblock.ptr = outbuffer;
-outblock.cmd_count = 0;
-outblock.authenticating = FALSE;
-
-(void)smtp_write_command(&outblock, FALSE, "QUIT\r\n");
-(void)smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout);
-(void)close(inblock.sock);
+/*XXX really we need an active-smtp-client ctx, rather than assuming stdout */
+cctx.sock = fileno(stdin);
+cctx.tls_ctx = cctx.sock == tls_out.active.sock ? tls_out.active.tls_ctx : NULL;
+
+sx.inblock.cctx = &cctx;
+sx.inblock.buffer = inbuffer;
+sx.inblock.buffersize = sizeof(inbuffer);
+sx.inblock.ptr = inbuffer;
+sx.inblock.ptrend = inbuffer;
+
+sx.outblock.cctx = &cctx;
+sx.outblock.buffersize = sizeof(outbuffer);
+sx.outblock.buffer = outbuffer;
+sx.outblock.ptr = outbuffer;
+sx.outblock.cmd_count = 0;
+sx.outblock.authenticating = FALSE;
+
+(void)smtp_write_command(&sx, SCMD_FLUSH, "QUIT\r\n");
+(void)smtp_read_response(&sx, buffer, sizeof(buffer), '2', ob->command_timeout);
+(void)close(cctx.sock);
}
address_item *addrlist) /* addresses we are working on */
{
int cutoff_retry;
-int port;
+int defport;
int hosts_defer = 0;
int hosts_fail = 0;
int hosts_looked_up = 0;
uschar *expanded_hosts = NULL;
uschar *pistring;
uschar *tid = string_sprintf("%s transport", tblock->name);
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)(tblock->options_block);
+smtp_transport_options_block *ob = SOB tblock->options_block;
host_item *hostlist = addrlist->host_list;
-host_item *host = NULL;
+host_item *host;
DEBUG(D_transport)
{
{
debug_printf("hostlist:\n");
for (host = hostlist; host; host = host->next)
- debug_printf(" %s:%d\n", host->name, host->port);
+ debug_printf(" '%s' IP %s port %d\n", host->name, host->address, host->port);
}
if (continue_hostname)
debug_printf("already connected to %s [%s] (on fd %d)\n",
continue_hostname, continue_host_address,
- cutthrough.fd >= 0 ? cutthrough.fd : 0);
+ cutthrough.cctx.sock >= 0 ? cutthrough.cctx.sock : 0);
}
/* Set the flag requesting that these hosts be added to the waiting
a host list with hosts_override set, use the host list supplied with the
transport. It is an error for this not to exist. */
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS)
+if (tls_requiretls & REQUIRETLS_MSG)
+ ob->tls_tempfail_tryclear = FALSE; /*XXX surely we should have a local for this
+ rather than modifying the transport? */
+#endif
+
if (!hostlist || (ob->hosts_override && ob->hosts))
{
if (!ob->hosts)
{
addrlist->message = string_sprintf("failed to expand list of hosts "
"\"%s\" in %s transport: %s", s, tblock->name, expand_string_message);
- addrlist->transport_return = search_find_defer ? DEFER : PANIC;
+ addrlist->transport_return = f.search_find_defer ? DEFER : PANIC;
return FALSE; /* Only top address has status */
}
DEBUG(D_transport) debug_printf("expanded list of hosts \"%s\" to "
/* Sort out the default port. */
-if (!smtp_get_port(ob->port, addrlist, &port, tid)) return FALSE;
+if (!smtp_get_port(ob->port, addrlist, &defport, tid)) return FALSE;
/* For each host-plus-IP-address on the list:
{
host_item *nexthost = NULL;
int unexpired_hosts_tried = 0;
+ BOOL continue_host_tried = FALSE;
+retry_non_continued:
for (host = hostlist;
host
&& unexpired_hosts_tried < ob->hosts_max_try
/* Find by name if so configured, or if it's an IP address. We don't
just copy the IP address, because we need the test-for-local to happen. */
- flags = HOST_FIND_BY_A;
+ flags = HOST_FIND_BY_A | HOST_FIND_BY_AAAA;
if (ob->dns_qualify_single) flags |= HOST_FIND_QUALIFY_SINGLE;
if (ob->dns_search_parents) flags |= HOST_FIND_SEARCH_PARENTS;
result of the lookup. Set expired FALSE, to save the outer loop executing
twice. */
- if ( continue_hostname
- && ( Ustrcmp(continue_hostname, host->name) != 0
- || Ustrcmp(continue_host_address, host->address) != 0
- ) )
- {
- expired = FALSE;
- continue; /* With next host */
- }
+ if (continue_hostname)
+ if ( Ustrcmp(continue_hostname, host->name) != 0
+ || Ustrcmp(continue_host_address, host->address) != 0
+ )
+ {
+ expired = FALSE;
+ continue; /* With next host */
+ }
+ else
+ continue_host_tried = TRUE;
/* Reset the default next host in case a multihomed host whose addresses
are not looked up till just above added to the host list. */
were not in it. We don't want to hold up all SMTP deliveries! Except when
doing a two-stage queue run, don't do this if forcing. */
- if ((!deliver_force || queue_2stage) && (queue_smtp ||
+ if ((!f.deliver_force || f.queue_2stage) && (f.queue_smtp ||
match_isinlist(addrlist->domain,
(const uschar **)&queue_smtp_domains, 0,
&domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL) == OK))
the default. */
pistring = string_sprintf(":%d", host->port == PORT_NONE
- ? port : host->port);
+ ? defport : host->port);
if (Ustrcmp(pistring, ":25") == 0) pistring = US"";
/* Select IPv4 or IPv6, and choose an outgoing interface. If the interface
{
if ( !host->address
|| host->status != hstatus_unusable_expired
- || host->last_try > received_time)
+ || host->last_try > received_time.tv_sec)
continue;
DEBUG(D_transport) debug_printf("trying expired host %s [%s]%s\n",
host->name, host->address, pistring);
sending the message down a pre-existing connection. */
if ( !continue_hostname
- && verify_check_given_host(&ob->serialize_hosts, host) == OK)
+ && verify_check_given_host(CUSS &ob->serialize_hosts, host) == OK)
{
serialize_key = string_sprintf("host-serialize-%s", host->name);
if (!enq_start(serialize_key, 1))
message_id, host->name, host->address, addrlist->address,
addrlist->next ? ", ..." : "");
- set_process_info("delivering %s to %s [%s] (%s%s)",
- message_id, host->name, host->address, addrlist->address,
+ set_process_info("delivering %s to %s [%s]%s (%s%s)",
+ message_id, host->name, host->address, pistring, addrlist->address,
addrlist->next ? ", ..." : "");
/* This is not for real; don't do the delivery. If there are
any remaining hosts, list them. */
- if (dont_deliver)
+ if (f.dont_deliver)
{
host_item *host2;
set_errno_nohost(addrlist, 0, NULL, OK, FALSE);
/* Attempt the delivery. */
total_hosts_tried++;
- rc = smtp_deliver(addrlist, thost, host_af, port, interface, tblock,
+ rc = smtp_deliver(addrlist, thost, host_af, defport, interface, tblock,
&message_defer, FALSE);
/* Yield is one of:
if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL
&& first_addr->basic_errno != ERRNO_TLSFAILURE)
- write_logs(first_addr, host);
+ write_logs(host, first_addr->message, first_addr->basic_errno);
#ifndef DISABLE_EVENT
if (rc == DEFER)
if ( rc == DEFER
&& first_addr->basic_errno == ERRNO_TLSFAILURE
&& ob->tls_tempfail_tryclear
- && verify_check_given_host(&ob->hosts_require_tls, host) != OK
+ && verify_check_given_host(CUSS &ob->hosts_require_tls, host) != OK
)
{
log_write(0, LOG_MAIN,
"%s: delivering unencrypted to H=%s [%s] (not in hosts_require_tls)",
first_addr->message, host->name, host->address);
first_addr = prepare_addresses(addrlist, host);
- rc = smtp_deliver(addrlist, thost, host_af, port, interface, tblock,
+ rc = smtp_deliver(addrlist, thost, host_af, defport, interface, tblock,
&message_defer, TRUE);
if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL)
- write_logs(first_addr, host);
+ write_logs(host, first_addr->message, first_addr->basic_errno);
# ifndef DISABLE_EVENT
if (rc == DEFER)
deferred_event_raise(first_addr, host);
: rc == ERROR ? US"ERROR"
: US"?";
- set_process_info("delivering %s: just tried %s [%s] for %s%s: result %s",
- message_id, host->name, host->address, addrlist->address,
+ set_process_info("delivering %s: just tried %s [%s]%s for %s%s: result %s",
+ message_id, host->name, host->address, pistring, addrlist->address,
addrlist->next ? " (& others)" : "", rs);
/* Release serialization if set up */
for (last_rule = retry->rules;
last_rule->next;
last_rule = last_rule->next);
- timedout = time(NULL) - received_time > last_rule->timeout;
+ timedout = time(NULL) - received_time.tv_sec > last_rule->timeout;
}
else timedout = TRUE; /* No rule => timed out */
"hosts_max_try (message older than host's retry time)\n");
}
}
+
+ DEBUG(D_transport)
+ {
+ if (unexpired_hosts_tried >= ob->hosts_max_try)
+ debug_printf("reached transport hosts_max_try limit %d\n",
+ ob->hosts_max_try);
+ if (total_hosts_tried >= ob->hosts_max_try_hardlimit)
+ debug_printf("reached transport hosts_max_try_hardlimit limit %d\n",
+ ob->hosts_max_try_hardlimit);
+ }
+
+ if (f.running_in_test_harness) millisleep(500); /* let server debug out */
} /* End of loop for trying multiple hosts. */
+ /* If we failed to find a matching host in the list, for an already-open
+ connection, just close it and start over with the list. This can happen
+ for routing that changes from run to run, or big multi-IP sites with
+ round-robin DNS. */
+
+ if (continue_hostname && !continue_host_tried)
+ {
+ int fd = cutthrough.cctx.sock >= 0 ? cutthrough.cctx.sock : 0;
+
+ DEBUG(D_transport) debug_printf("no hosts match already-open connection\n");
+#ifdef SUPPORT_TLS
+ /* A TLS conn could be open for a cutthrough, but not for a plain continued-
+ transport */
+/*XXX doublecheck that! */
+
+ if (cutthrough.cctx.sock >= 0 && cutthrough.is_tls)
+ {
+ (void) tls_write(cutthrough.cctx.tls_ctx, US"QUIT\r\n", 6, FALSE);
+ tls_close(cutthrough.cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT);
+ cutthrough.cctx.tls_ctx = NULL;
+ cutthrough.is_tls = FALSE;
+ }
+ else
+#else
+ (void) write(fd, US"QUIT\r\n", 6);
+#endif
+ (void) close(fd);
+ cutthrough.cctx.sock = -1;
+ continue_hostname = NULL;
+ goto retry_non_continued;
+ }
+
/* This is the end of the loop that repeats iff expired is TRUE and
ob->delay_after_cutoff is FALSE. The second time round we will
try those hosts that haven't been tried since the message arrived. */
setflag(addr, af_retry_skipped);
}
- if (queue_smtp) /* no deliveries attempted */
+ if (f.queue_smtp) /* no deliveries attempted */
{
addr->transport_return = DEFER;
addr->basic_errno = 0;
return TRUE; /* Each address has its status */
}
+#endif /*!MACRO_PREDEF*/
/* vi: aw ai sw=2
*/
/* End of transport/smtp.c */
projects / exim.git / blobdiff