* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2017 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
#include "../exim.h"
(void *)offsetof(smtp_transport_options_block, dkim.dkim_canon) },
{ "dkim_domain", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, dkim.dkim_domain) },
+ { "dkim_hash", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_hash) },
+ { "dkim_identity", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_identity) },
{ "dkim_private_key", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, dkim.dkim_private_key) },
{ "dkim_selector", opt_stringptr,
{ "hosts_require_auth", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_require_auth) },
#ifdef SUPPORT_TLS
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
{ "hosts_require_dane", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_require_dane) },
# endif
(void *)offsetof(smtp_transport_options_block, hosts_try_auth) },
{ "hosts_try_chunking", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_try_chunking) },
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE)
{ "hosts_try_dane", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_try_dane) },
#endif
int smtp_transport_options_count =
sizeof(smtp_transport_options)/sizeof(optionlist);
+
+#ifdef MACRO_PREDEF
+
+/* Dummy values */
+smtp_transport_options_block smtp_transport_option_defaults = {0};
+void smtp_transport_init(transport_instance *tblock) {}
+BOOL smtp_transport_entry(transport_instance *tblock, address_item *addr) {return FALSE;}
+void smtp_transport_closedown(transport_instance *tblock) {}
+
+#else /*!MACRO_PREDEF*/
+
+
/* Default private options block for the smtp transport. */
smtp_transport_options_block smtp_transport_option_defaults = {
- NULL, /* hosts */
- NULL, /* fallback_hosts */
- NULL, /* hostlist */
- NULL, /* fallback_hostlist */
- NULL, /* authenticated_sender */
- US"$primary_hostname", /* helo_data */
- NULL, /* interface */
- NULL, /* port */
- US"smtp", /* protocol */
- NULL, /* DSCP */
- NULL, /* serialize_hosts */
- NULL, /* hosts_try_auth */
- NULL, /* hosts_require_auth */
- US"*", /* hosts_try_chunking */
-#ifdef EXPERIMENTAL_DANE
- NULL, /* hosts_try_dane */
- NULL, /* hosts_require_dane */
+ .hosts = NULL,
+ .fallback_hosts = NULL,
+ .hostlist = NULL,
+ .fallback_hostlist = NULL,
+ .authenticated_sender = NULL,
+ .helo_data = US"$primary_hostname",
+ .interface = NULL,
+ .port = NULL,
+ .protocol = US"smtp",
+ .dscp = NULL,
+ .serialize_hosts = NULL,
+ .hosts_try_auth = NULL,
+ .hosts_require_auth = NULL,
+ .hosts_try_chunking = US"*",
+#ifdef SUPPORT_DANE
+ .hosts_try_dane = NULL,
+ .hosts_require_dane = NULL,
#endif
- NULL, /* hosts_try_fastopen */
+ .hosts_try_fastopen = NULL,
#ifndef DISABLE_PRDR
- US"*", /* hosts_try_prdr */
+ .hosts_try_prdr = US"*",
#endif
#ifndef DISABLE_OCSP
- US"*", /* hosts_request_ocsp (except under DANE; tls_client_start()) */
- NULL, /* hosts_require_ocsp */
+ .hosts_request_ocsp = US"*", /* hosts_request_ocsp (except under DANE; tls_client_start()) */
+ .hosts_require_ocsp = NULL,
#endif
- NULL, /* hosts_require_tls */
- NULL, /* hosts_avoid_tls */
- NULL, /* hosts_verify_avoid_tls */
- NULL, /* hosts_avoid_pipelining */
- NULL, /* hosts_avoid_esmtp */
+ .hosts_require_tls = NULL,
+ .hosts_avoid_tls = NULL,
+ .hosts_verify_avoid_tls = NULL,
+ .hosts_avoid_pipelining = NULL,
+ .hosts_avoid_esmtp = NULL,
#ifdef SUPPORT_TLS
- NULL, /* hosts_nopass_tls */
- US"*", /* hosts_noproxy_tls */
+ .hosts_nopass_tls = NULL,
+ .hosts_noproxy_tls = US"*",
#endif
- 5*60, /* command_timeout */
- 5*60, /* connect_timeout; shorter system default overrides */
- 5*60, /* data timeout */
- 10*60, /* final timeout */
- 1024, /* size_addition */
- 5, /* hosts_max_try */
- 50, /* hosts_max_try_hardlimit */
- TRUE, /* address_retry_include_sender */
- FALSE, /* allow_localhost */
- FALSE, /* authenticated_sender_force */
- FALSE, /* gethostbyname */
- TRUE, /* dns_qualify_single */
- FALSE, /* dns_search_parents */
- { NULL, NULL }, /* dnssec_domains {request,require} */
- TRUE, /* delay_after_cutoff */
- FALSE, /* hosts_override */
- FALSE, /* hosts_randomize */
- TRUE, /* keepalive */
- FALSE, /* lmtp_ignore_quota */
- NULL, /* expand_retry_include_ip_address */
- TRUE /* retry_include_ip_address */
+ .command_timeout = 5*60,
+ .connect_timeout = 5*60,
+ .data_timeout = 5*60,
+ .final_timeout = 10*60,
+ .size_addition = 1024,
+ .hosts_max_try = 5,
+ .hosts_max_try_hardlimit = 50,
+ .address_retry_include_sender = TRUE,
+ .allow_localhost = FALSE,
+ .authenticated_sender_force = FALSE,
+ .gethostbyname = FALSE,
+ .dns_qualify_single = TRUE,
+ .dns_search_parents = FALSE,
+ .dnssec = { .request=NULL, .require=NULL },
+ .delay_after_cutoff = TRUE,
+ .hosts_override = FALSE,
+ .hosts_randomize = FALSE,
+ .keepalive = TRUE,
+ .lmtp_ignore_quota = FALSE,
+ .expand_retry_include_ip_address = NULL,
+ .retry_include_ip_address = TRUE,
#ifdef SUPPORT_SOCKS
- ,NULL /* socks_proxy */
+ .socks_proxy = NULL,
#endif
#ifdef SUPPORT_TLS
- ,NULL, /* tls_certificate */
- NULL, /* tls_crl */
- NULL, /* tls_privatekey */
- NULL, /* tls_require_ciphers */
- NULL, /* tls_sni */
- US"system", /* tls_verify_certificates */
- EXIM_CLIENT_DH_DEFAULT_MIN_BITS,
- /* tls_dh_min_bits */
- TRUE, /* tls_tempfail_tryclear */
- NULL, /* tls_verify_hosts */
- US"*", /* tls_try_verify_hosts */
- US"*" /* tls_verify_cert_hostnames */
+ .tls_certificate = NULL,
+ .tls_crl = NULL,
+ .tls_privatekey = NULL,
+ .tls_require_ciphers = NULL,
+ .tls_sni = NULL,
+ .tls_verify_certificates = US"system",
+ .tls_dh_min_bits = EXIM_CLIENT_DH_DEFAULT_MIN_BITS,
+ .tls_tempfail_tryclear = TRUE,
+ .tls_verify_hosts = NULL,
+ .tls_try_verify_hosts = US"*",
+ .tls_verify_cert_hostnames = US"*",
#endif
#ifndef DISABLE_DKIM
- , {NULL, /* dkim_canon */
- NULL, /* dkim_domain */
- NULL, /* dkim_private_key */
- NULL, /* dkim_selector */
- NULL, /* dkim_sign_headers */
- NULL, /* dkim_strict */
- FALSE} /* dot_stuffed */
+ .dkim =
+ {.dkim_domain = NULL,
+ .dkim_identity = NULL,
+ .dkim_private_key = NULL,
+ .dkim_selector = NULL,
+ .dkim_canon = NULL,
+ .dkim_sign_headers = NULL,
+ .dkim_strict = NULL,
+ .dkim_hash = US"sha256",
+ .dot_stuffed = FALSE},
#endif
};
/* This writes to the main log and to the message log.
Arguments:
- addr the address item containing error information
host the current host
+ detail the current message (addr_item->message)
+ basic_errno the errno (addr_item->basic_errno)
Returns: nothing
*/
static void
-write_logs(address_item *addr, host_item *host)
+write_logs(const host_item *host, const uschar *suffix, int basic_errno)
{
-uschar * message = LOGGING(outgoing_port)
+
+
+uschar *message = LOGGING(outgoing_port)
? string_sprintf("H=%s [%s]:%d", host->name, host->address,
host->port == PORT_NONE ? 25 : host->port)
: string_sprintf("H=%s [%s]", host->name, host->address);
-if (addr->message)
+if (suffix)
{
- message = string_sprintf("%s: %s", message, addr->message);
- if (addr->basic_errno > 0)
- message = string_sprintf("%s: %s", message, strerror(addr->basic_errno));
- log_write(0, LOG_MAIN, "%s", message);
- deliver_msglog("%s %s\n", tod_stamp(tod_log), message);
+ message = string_sprintf("%s: %s", message, suffix);
+ if (basic_errno > 0)
+ message = string_sprintf("%s: %s", message, strerror(basic_errno));
}
else
- {
- const uschar * s = exim_errstr(addr->basic_errno);
- log_write(0, LOG_MAIN, "%s %s", message, s);
- deliver_msglog("%s %s %s\n", tod_stamp(tod_log), message, s);
- }
+ message = string_sprintf("%s %s", message, exim_errstr(basic_errno));
+
+log_write(0, LOG_MAIN, "%s", message);
+deliver_msglog("%s %s\n", tod_stamp(tod_log), message);
}
static void
while (count-- > 0)
{
- while (addr->transport_return != PENDING_DEFER) addr = addr->next;
+ while (addr->transport_return != PENDING_DEFER)
+ if (!(addr = addr->next))
+ return -2;
/* The address was accepted */
addr->host_used = sx->host;
If one is found, attempt to authenticate by calling its client function.
*/
- for (au = auths; !smtp_authenticated && au != NULL; au = au->next)
+ for (au = auths; !smtp_authenticated && au; au = au->next)
{
uschar *p = names;
if (!au->client ||
/* Loop to scan supported server mechanisms */
- while (*p != 0)
+ while (*p)
{
int rc;
int len = Ustrlen(au->public_name);
-#ifdef EXPERIMENTAL_DANE
+#ifdef SUPPORT_DANE
/* Lookup TLSA record for host/port.
Return: OK success with dnssec; DANE mode
DEFER Do not use this host now, may retry later
/* move this out to host.c given the similarity to dns_lookup() ? */
uschar buffer[300];
const uschar * fullname = buffer;
+int rc;
+BOOL sec;
/* TLSA lookup string */
(void)sprintf(CS buffer, "_%d._tcp.%.256s", host->port, host->name);
-switch (dns_lookup(dnsa, buffer, T_TLSA, &fullname))
- {
- case DNS_SUCCEED:
- if (!dns_is_secure(dnsa))
- {
- log_write(0, LOG_MAIN, "DANE error: TLSA lookup not DNSSEC");
- return DEFER;
- }
- return OK;
+rc = dns_lookup(dnsa, buffer, T_TLSA, &fullname);
+sec = dns_is_secure(dnsa);
+DEBUG(D_transport)
+ debug_printf("TLSA lookup ret %d %sDNSSEC\n", rc, sec ? "" : "not ");
+switch (rc)
+ {
case DNS_AGAIN:
return DEFER; /* just defer this TLS'd conn */
+ case DNS_SUCCEED:
+ if (sec) return OK;
+ log_write(0, LOG_MAIN,
+ "DANE error: TLSA lookup for %s not DNSSEC", host->name);
+ /*FALLTRHOUGH*/
+
case DNS_NODATA: /* no TLSA RR for this lookup */
case DNS_NOMATCH: /* no records at all for this lookup */
return dane_required ? FAIL : FAIL_FORCED;
size_t bsize = Ustrlen(buf);
#ifdef SUPPORT_TLS
-if ( checks & PEER_OFFERED_TLS
+if ( checks & OPTION_TLS
&& pcre_exec(regex_STARTTLS, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_TLS;
+ checks &= ~OPTION_TLS;
#endif
-if ( checks & PEER_OFFERED_IGNQ
+if ( checks & OPTION_IGNQ
&& pcre_exec(regex_IGNOREQUOTA, NULL, CS buf, bsize, 0,
PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_IGNQ;
+ checks &= ~OPTION_IGNQ;
-if ( checks & PEER_OFFERED_CHUNKING
+if ( checks & OPTION_CHUNKING
&& pcre_exec(regex_CHUNKING, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_CHUNKING;
+ checks &= ~OPTION_CHUNKING;
#ifndef DISABLE_PRDR
-if ( checks & PEER_OFFERED_PRDR
+if ( checks & OPTION_PRDR
&& pcre_exec(regex_PRDR, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_PRDR;
+ checks &= ~OPTION_PRDR;
#endif
#ifdef SUPPORT_I18N
-if ( checks & PEER_OFFERED_UTF8
+if ( checks & OPTION_UTF8
&& pcre_exec(regex_UTF8, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_UTF8;
+ checks &= ~OPTION_UTF8;
#endif
-if ( checks & PEER_OFFERED_DSN
+if ( checks & OPTION_DSN
&& pcre_exec(regex_DSN, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_DSN;
+ checks &= ~OPTION_DSN;
-if ( checks & PEER_OFFERED_PIPE
+if ( checks & OPTION_PIPE
&& pcre_exec(regex_PIPELINING, NULL, CS buf, bsize, 0,
PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_PIPE;
+ checks &= ~OPTION_PIPE;
-if ( checks & PEER_OFFERED_SIZE
+if ( checks & OPTION_SIZE
&& pcre_exec(regex_SIZE, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_SIZE;
+ checks &= ~OPTION_SIZE;
return checks;
}
int cmd_count = 0;
int prev_cmd_count;
-/* Write SMTP chunk header command */
+/* Write SMTP chunk header command. If not reaping responses, note that
+there may be more writes (like, the chunk data) done soon. */
if (chunk_size > 0)
{
- if((cmd_count = smtp_write_command(&sx->outblock, FALSE, "BDAT %u%s\r\n",
- chunk_size,
- flags & tc_chunk_last ? " LAST" : "")
+ if((cmd_count = smtp_write_command(&sx->outblock,
+ flags & tc_reap_prev ? SCMD_FLUSH : SCMD_MORE,
+ "BDAT %u%s\r\n", chunk_size, flags & tc_chunk_last ? " LAST" : "")
) < 0) return ERROR;
if (flags & tc_chunk_last)
data_command = string_copy(big_buffer); /* Save for later error message */
int
smtp_setup_conn(smtp_context * sx, BOOL suppress_tls)
{
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE)
dns_answer tlsa_dnsa;
#endif
BOOL pass_message = FALSE;
sx->utf8_needed = FALSE;
#endif
sx->dsn_all_lasthop = TRUE;
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE)
sx->dane = FALSE;
sx->dane_required = verify_check_given_host(&sx->ob->hosts_require_dane, sx->host) == OK;
#endif
if ((sx->max_rcpt = sx->tblock->max_addresses) == 0) sx->max_rcpt = 999999;
sx->peer_offered = 0;
+sx->avoid_option = 0;
sx->igquotstr = US"";
if (!sx->helo_data) sx->helo_data = sx->ob->helo_data;
#ifdef EXPERIMENTAL_DSN_INFO
the initial interaction and HELO/EHLO/LHLO. Connect timeout errors are handled
specially so they can be identified for retries. */
-if (continue_hostname == NULL)
+if (!continue_hostname)
{
if (sx->verify)
HDEBUG(D_verify) debug_printf("interface=%s port=%d\n", sx->interface, sx->port);
- /* This puts port into host->port */
- sx->inblock.sock = sx->outblock.sock =
- smtp_connect(sx->host, sx->host_af, sx->port, sx->interface,
- sx->ob->connect_timeout, sx->tblock);
+ /* Get the actual port the connection will use, into sx->host */
- if (sx->inblock.sock < 0)
- {
- uschar * msg = NULL;
- if (sx->verify)
- {
- msg = US strerror(errno);
- HDEBUG(D_verify) debug_printf("connect: %s\n", msg);
- }
- set_errno_nohost(sx->addrlist,
- errno == ETIMEDOUT ? ERRNO_CONNECTTIMEOUT : errno,
- sx->verify ? string_sprintf("could not connect: %s", msg)
- : NULL,
- DEFER, FALSE);
- sx->send_quit = FALSE;
- return DEFER;
- }
+ smtp_port_for_connect(sx->host, sx->port);
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE)
+ /* Do TLSA lookup for DANE */
{
tls_out.dane_verified = FALSE;
tls_out.tlsa_usage = 0;
)
switch (rc = tlsa_lookup(sx->host, &tlsa_dnsa, sx->dane_required))
{
- case OK: sx->dane = TRUE; break;
+ case OK: sx->dane = TRUE;
+ sx->ob->tls_tempfail_tryclear = FALSE;
+ break;
case FAIL_FORCED: break;
default: set_errno_nohost(sx->addrlist, ERRNO_DNSDEFER,
string_sprintf("DANE error: tlsa lookup %s",
FAIL, FALSE);
return FAIL;
}
-
- if (sx->dane)
- sx->ob->tls_tempfail_tryclear = FALSE;
}
#endif /*DANE*/
+ /* Make the TCP connection */
+
+ sx->inblock.sock = sx->outblock.sock =
+ smtp_connect(sx->host, sx->host_af, sx->interface,
+ sx->ob->connect_timeout, sx->tblock);
+
+ if (sx->inblock.sock < 0)
+ {
+ uschar * msg = NULL;
+ if (sx->verify)
+ {
+ msg = US strerror(errno);
+ HDEBUG(D_verify) debug_printf("connect: %s\n", msg);
+ }
+ set_errno_nohost(sx->addrlist,
+ errno == ETIMEDOUT ? ERRNO_CONNECTTIMEOUT : errno,
+ sx->verify ? string_sprintf("could not connect: %s", msg)
+ : NULL,
+ DEFER, FALSE);
+ sx->send_quit = FALSE;
+ return DEFER;
+ }
+
/* Expand the greeting message while waiting for the initial response. (Makes
sense if helo_data contains ${lookup dnsdb ...} stuff). The expansion is
delayed till here so that $sending_interface and $sending_port are set. */
#ifdef SUPPORT_TLS
if (sx->smtps)
{
- smtp_peer_options |= PEER_OFFERED_TLS;
+ smtp_peer_options |= OPTION_TLS;
suppress_tls = FALSE;
sx->ob->tls_tempfail_tryclear = FALSE;
smtp_command = US"SSL-on-connect";
if (sx->esmtp)
{
- if (smtp_write_command(&sx->outblock, FALSE, "%s %s\r\n",
+ if (smtp_write_command(&sx->outblock, SCMD_FLUSH, "%s %s\r\n",
sx->lmtp ? "LHLO" : "EHLO", sx->helo_data) < 0)
goto SEND_FAILED;
sx->esmtp_sent = TRUE;
if (sx->esmtp_sent && (n = Ustrlen(sx->buffer)) < sizeof(sx->buffer)/2)
{ rsp = sx->buffer + n + 1; n = sizeof(sx->buffer) - n; }
- if (smtp_write_command(&sx->outblock, FALSE, "HELO %s\r\n", sx->helo_data) < 0)
+ if (smtp_write_command(&sx->outblock, SCMD_FLUSH, "HELO %s\r\n", sx->helo_data) < 0)
goto SEND_FAILED;
good_response = smtp_read_response(&sx->inblock, rsp, n,
'2', sx->ob->command_timeout);
errno = ERRNO_SMTPCLOSED;
goto EHLOHELO_FAILED;
}
- Ustrncpy(sx->buffer, rsp, sizeof(sx->buffer)/2);
+ memmove(sx->buffer, rsp, Ustrlen(rsp));
goto RESPONSE_FAILED;
}
}
- sx->peer_offered = smtp_peer_options = 0;
+ sx->avoid_option = sx->peer_offered = smtp_peer_options = 0;
if (sx->esmtp || sx->lmtp)
{
sx->peer_offered = ehlo_response(sx->buffer,
- PEER_OFFERED_TLS /* others checked later */
+ OPTION_TLS /* others checked later */
);
/* Set tls_offered if the response to EHLO specifies support for STARTTLS. */
#ifdef SUPPORT_TLS
- smtp_peer_options |= sx->peer_offered & PEER_OFFERED_TLS;
+ smtp_peer_options |= sx->peer_offered & OPTION_TLS;
#endif
}
}
else
{
sx->inblock.sock = sx->outblock.sock = 0; /* stdin */
- sx->host->port = sx->port; /* Record the port that was used */
+ smtp_port_for_connect(sx->host, sx->port); /* Record the port that was used */
}
smtp_command = big_buffer;
sx->helo_data = NULL; /* ensure we re-expand ob->helo_data */
)
{
sx->peer_offered = smtp_peer_options;
- pipelining_active = !!(smtp_peer_options & PEER_OFFERED_PIPE);
+ pipelining_active = !!(smtp_peer_options & OPTION_PIPE);
HDEBUG(D_transport) debug_printf("continued connection, %s TLS\n",
continue_proxy_cipher ? "proxied" : "verify conn with");
return OK;
for error analysis. */
#ifdef SUPPORT_TLS
-if ( smtp_peer_options & PEER_OFFERED_TLS
+if ( smtp_peer_options & OPTION_TLS
&& !suppress_tls
&& verify_check_given_host(&sx->ob->hosts_avoid_tls, sx->host) != OK
&& ( !sx->verify
) )
{
uschar buffer2[4096];
- if (smtp_write_command(&sx->outblock, FALSE, "STARTTLS\r\n") < 0)
+ if (smtp_write_command(&sx->outblock, SCMD_FLUSH, "STARTTLS\r\n") < 0)
goto SEND_FAILED;
/* If there is an I/O error, transmission of this message is deferred. If
address_item * addr;
uschar * errstr;
int rc = tls_client_start(sx->inblock.sock, sx->host, sx->addrlist, sx->tblock,
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
sx->dane ? &tlsa_dnsa : NULL,
# endif
&errstr);
if (rc != OK)
{
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
if (sx->dane) log_write(0, LOG_MAIN,
"DANE attempt failed; TLS connection to %s [%s]: %s",
sx->host->name, sx->host->address, errstr);
debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n");
}
- if (smtp_write_command(&sx->outblock, FALSE, "%s %s\r\n",
+ if (smtp_write_command(&sx->outblock, SCMD_FLUSH, "%s %s\r\n",
sx->lmtp ? "LHLO" : greeting_cmd, sx->helo_data) < 0)
goto SEND_FAILED;
good_response = smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer),
have one. */
else if ( sx->smtps
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
|| sx->dane
# endif
|| verify_check_given_host(&sx->ob->hosts_require_tls, sx->host) == OK
{
errno = ERRNO_TLSREQUIRED;
message = string_sprintf("a TLS session is required, but %s",
- smtp_peer_options & PEER_OFFERED_TLS
+ smtp_peer_options & OPTION_TLS
? "an attempt to start TLS failed" : "the server did not offer TLS support");
goto TLS_FAILED;
}
{
sx->peer_offered = ehlo_response(sx->buffer,
0 /* no TLS */
- | (sx->lmtp && sx->ob->lmtp_ignore_quota ? PEER_OFFERED_IGNQ : 0)
- | PEER_OFFERED_CHUNKING
- | PEER_OFFERED_PRDR
+ | (sx->lmtp && sx->ob->lmtp_ignore_quota ? OPTION_IGNQ : 0)
+ | OPTION_CHUNKING
+ | OPTION_PRDR
#ifdef SUPPORT_I18N
- | (sx->addrlist->prop.utf8_msg ? PEER_OFFERED_UTF8 : 0)
+ | (sx->addrlist->prop.utf8_msg ? OPTION_UTF8 : 0)
/*XXX if we hand peercaps on to continued-conn processes,
must not depend on this addr */
#endif
- | PEER_OFFERED_DSN
- | PEER_OFFERED_PIPE
- | (sx->ob->size_addition >= 0 ? PEER_OFFERED_SIZE : 0)
+ | OPTION_DSN
+ | OPTION_PIPE
+ | (sx->ob->size_addition >= 0 ? OPTION_SIZE : 0)
);
/* Set for IGNOREQUOTA if the response to LHLO specifies support and the
lmtp_ignore_quota option was set. */
- sx->igquotstr = sx->peer_offered & PEER_OFFERED_IGNQ ? US" IGNOREQUOTA" : US"";
+ sx->igquotstr = sx->peer_offered & OPTION_IGNQ ? US" IGNOREQUOTA" : US"";
/* If the response to EHLO specified support for the SIZE parameter, note
this, provided size_addition is non-negative. */
- smtp_peer_options |= sx->peer_offered & PEER_OFFERED_SIZE;
+ smtp_peer_options |= sx->peer_offered & OPTION_SIZE;
/* Note whether the server supports PIPELINING. If hosts_avoid_esmtp matched
the current host, esmtp will be false, so PIPELINING can never be used. If
the current host matches hosts_avoid_pipelining, don't do it. */
- if ( sx->peer_offered & PEER_OFFERED_PIPE
+ if ( sx->peer_offered & OPTION_PIPE
&& verify_check_given_host(&sx->ob->hosts_avoid_pipelining, sx->host) != OK)
- smtp_peer_options |= PEER_OFFERED_PIPE;
+ smtp_peer_options |= OPTION_PIPE;
DEBUG(D_transport) debug_printf("%susing PIPELINING\n",
- smtp_peer_options & PEER_OFFERED_PIPE ? "" : "not ");
+ smtp_peer_options & OPTION_PIPE ? "" : "not ");
- if ( sx->peer_offered & PEER_OFFERED_CHUNKING
+ if ( sx->peer_offered & OPTION_CHUNKING
&& verify_check_given_host(&sx->ob->hosts_try_chunking, sx->host) != OK)
- sx->peer_offered &= ~PEER_OFFERED_CHUNKING;
+ sx->peer_offered &= ~OPTION_CHUNKING;
- if (sx->peer_offered & PEER_OFFERED_CHUNKING)
+ if (sx->peer_offered & OPTION_CHUNKING)
{DEBUG(D_transport) debug_printf("CHUNKING usable\n");}
#ifndef DISABLE_PRDR
- if ( sx->peer_offered & PEER_OFFERED_PRDR
+ if ( sx->peer_offered & OPTION_PRDR
&& verify_check_given_host(&sx->ob->hosts_try_prdr, sx->host) != OK)
- sx->peer_offered &= ~PEER_OFFERED_PRDR;
+ sx->peer_offered &= ~OPTION_PRDR;
- if (sx->peer_offered & PEER_OFFERED_PRDR)
+ if (sx->peer_offered & OPTION_PRDR)
{DEBUG(D_transport) debug_printf("PRDR usable\n");}
#endif
/* Note if the server supports DSN */
- smtp_peer_options |= sx->peer_offered & PEER_OFFERED_DSN;
+ smtp_peer_options |= sx->peer_offered & OPTION_DSN;
DEBUG(D_transport) debug_printf("%susing DSN\n",
- sx->peer_offered & PEER_OFFERED_DSN ? "" : "not ");
+ sx->peer_offered & OPTION_DSN ? "" : "not ");
/* Note if the response to EHLO specifies support for the AUTH extension.
If it has, check that this host is one we want to authenticate to, and do
}
}
}
-pipelining_active = !!(smtp_peer_options & PEER_OFFERED_PIPE);
+pipelining_active = !!(smtp_peer_options & OPTION_PIPE);
/* The setting up of the SMTP call is now complete. Any subsequent errors are
message-specific. */
}
/* If this is an international message we need the host to speak SMTPUTF8 */
-if (sx->utf8_needed && !(sx->peer_offered & PEER_OFFERED_UTF8))
+if (sx->utf8_needed && !(sx->peer_offered & OPTION_UTF8))
{
errno = ERRNO_UTF8_FWD;
goto RESPONSE_FAILED;
sx->send_quit = FALSE;
goto FAILED;
- /* This label is jumped to directly when a TLS negotiation has failed,
- or was not done for a host for which it is required. Values will be set
- in message and errno, and setting_up will always be true. Treat as
- a temporary error. */
-
EHLOHELO_FAILED:
code = '4';
message = string_sprintf("Remote host closed connection in response to %s"
sx->send_quit = FALSE;
goto FAILED;
+ /* This label is jumped to directly when a TLS negotiation has failed,
+ or was not done for a host for which it is required. Values will be set
+ in message and errno, and setting_up will always be true. Treat as
+ a temporary error. */
+
#ifdef SUPPORT_TLS
TLS_FAILED:
code = '4';
/* The failure happened while setting up the call; see if the failure was
a 5xx response (this will either be on connection, or following HELO - a 5xx
- after EHLO causes it to try HELO). If so, fail all addresses, as this host is
- never going to accept them. For other errors during setting up (timeouts or
- whatever), defer all addresses, and yield DEFER, so that the host is not
- tried again for a while. */
+ after EHLO causes it to try HELO). If so, and there are no more hosts to try,
+ fail all addresses, as this host is never going to accept them. For other
+ errors during setting up (timeouts or whatever), defer all addresses, and
+ yield DEFER, so that the host is not tried again for a while.
+
+ XXX This peeking for another host feels like a layering violation. We want
+ to note the host as unusable, but down here we shouldn't know if this was
+ the last host to try for the addr(list). Perhaps the upper layer should be
+ the one to do set_errno() ? The problem is that currently the addr is where
+ errno etc. are stashed, but until we run out of hosts to try the errors are
+ host-specific. Maybe we should enhance the host_item definition? */
FAILED:
sx->ok = FALSE; /* For when reached by GOTO */
-
- yield = code == '5'
+ set_errno(sx->addrlist, errno, message,
+ sx->host->next
+ ? DEFER
+ : code == '5'
#ifdef SUPPORT_I18N
- || errno == ERRNO_UTF8_FWD
+ || errno == ERRNO_UTF8_FWD
#endif
- ? FAIL : DEFER;
-
- set_errno(sx->addrlist, errno, message, yield, pass_message, sx->host
+ ? FAIL : DEFER,
+ pass_message, sx->host
#ifdef EXPERIMENTAL_DSN_INFO
, sx->smtp_greeting, sx->helo_response
#endif
);
+ yield = DEFER;
}
SEND_QUIT:
if (sx->send_quit)
- (void)smtp_write_command(&sx->outblock, FALSE, "QUIT\r\n");
+ (void)smtp_write_command(&sx->outblock, SCMD_FLUSH, "QUIT\r\n");
#ifdef SUPPORT_TLS
tls_close(FALSE, TRUE);
/* Close the socket, and return the appropriate value, first setting
works because the NULL setting is passed back to the calling process, and
remote_max_parallel is forced to 1 when delivering over an existing connection,
-
-If all went well and continue_more is set, we shouldn't actually get here if
-there are further addresses, as the return above will be taken. However,
-writing RSET might have failed, or there may be other addresses whose hosts are
-specified in the transports, and therefore not visible at top level, in which
-case continue_more won't get set. */
+*/
HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n");
if (sx->send_quit)
*p = 0;
-/* If we know the receiving MTA supports the SIZE qualification,
+/* If we know the receiving MTA supports the SIZE qualification, and we know it,
send it, adding something to the message size to allow for imprecision
and things that get added en route. Exim keeps the number of lines
in a message, so we can give an accurate value for the original message, but we
need some additional to handle added headers. (Double "." characters don't get
included in the count.) */
-if (sx->peer_offered & PEER_OFFERED_SIZE)
+if ( message_size > 0
+ && sx->peer_offered & OPTION_SIZE && !(sx->avoid_option & OPTION_SIZE))
{
+/*XXX problem here under spool_files_wireformat?
+Or just forget about lines? Or inflate by a fixed proportion? */
+
sprintf(CS p, " SIZE=%d", message_size+message_linecount+sx->ob->size_addition);
while (*p) p++;
}
request that */
sx->prdr_active = FALSE;
-if (sx->peer_offered & PEER_OFFERED_PRDR)
+if (sx->peer_offered & OPTION_PRDR)
for (addr = addrlist; addr; addr = addr->next)
if (addr->transport_return == PENDING_DEFER)
{
/* If it supports internationalised messages, and this meesage need that,
request it */
-if ( sx->peer_offered & PEER_OFFERED_UTF8
+if ( sx->peer_offered & OPTION_UTF8
&& addrlist->prop.utf8_msg
&& !addrlist->prop.utf8_downcvt
)
/* Add any DSN flags to the mail command */
-if (sx->peer_offered & PEER_OFFERED_DSN && !sx->dsn_all_lasthop)
+if (sx->peer_offered & OPTION_DSN && !sx->dsn_all_lasthop)
{
if (dsn_ret == dsn_ret_hdrs)
{ Ustrcpy(p, " RET=HDRS"); p += 9; }
/* Add any DSN flags to the rcpt command */
-if (sx->peer_offered & PEER_OFFERED_DSN && !(addr->dsn_flags & rf_dsnlasthop))
+if (sx->peer_offered & OPTION_DSN && !(addr->dsn_flags & rf_dsnlasthop))
{
if (addr->dsn_flags & rf_dsnflags)
{
the delivery log line. */
if ( sx->addrlist->prop.utf8_msg
- && (sx->addrlist->prop.utf8_downcvt || !(sx->peer_offered & PEER_OFFERED_UTF8))
+ && (sx->addrlist->prop.utf8_downcvt || !(sx->peer_offered & OPTION_UTF8))
)
{
if (s = string_address_utf8_to_alabel(s, &errstr), errstr)
}
#endif
- rc = smtp_write_command(&sx->outblock, pipelining_active,
+ rc = smtp_write_command(&sx->outblock, pipelining_active ? SCMD_BUFFER : SCMD_FLUSH,
"MAIL FROM:<%s>%s\r\n", s, sx->buffer);
}
BOOL no_flush;
uschar * rcpt_addr;
- addr->dsn_aware = sx->peer_offered & PEER_OFFERED_DSN
+ if (tcp_out_fastopen && !tcp_out_fastopen_logged)
+ {
+ setflag(addr, af_tcp_fastopen_conn);
+ if (tcp_out_fastopen > 1) setflag(addr, af_tcp_fastopen);
+ }
+
+ addr->dsn_aware = sx->peer_offered & OPTION_DSN
? dsn_support_yes : dsn_support_no;
address_count++;
- no_flush = pipelining_active && !sx->verify && (!mua_wrapper || addr->next);
+ no_flush = pipelining_active && !sx->verify
+ && (!mua_wrapper || addr->next && address_count < sx->max_rcpt);
build_rcptcmd_options(sx, addr);
}
#endif
- count = smtp_write_command(&sx->outblock, no_flush, "RCPT TO:<%s>%s%s\r\n",
- rcpt_addr, sx->igquotstr, sx->buffer);
+ count = smtp_write_command(&sx->outblock, no_flush ? SCMD_BUFFER : SCMD_FLUSH,
+ "RCPT TO:<%s>%s%s\r\n", rcpt_addr, sx->igquotstr, sx->buffer);
if (count < 0) return -5;
if (count > 0)
}
} /* Loop for next address */
+tcp_out_fastopen_logged = TRUE;
sx->next_addr = addr;
return 0;
}
* Proxy TLS connection for another transport process *
******************************************************/
/*
-Use the given buffer as a staging area, and select on both the given fd
-and the TLS'd client-fd for data to read (per the coding in ip_recv() and
-fd_ready() this is legitimate). Do blocking full-size writes, and reads
-under a timeout.
+Close the unused end of the pipe, fork once more, then use the given buffer
+as a staging area, and select on both the given fd and the TLS'd client-fd for
+data to read (per the coding in ip_recv() and fd_ready() this is legitimate).
+Do blocking full-size writes, and reads under a timeout. Once both input
+channels are closed, exit the process.
Arguments:
buf space to use for buffering
bufsiz size of buffer
- proxy_fd comms to proxied process
+ pfd pipe filedescriptor array; [0] is comms to proxied process
timeout per-read timeout, seconds
*/
void
-smtp_proxy_tls(uschar * buf, size_t bsize, int proxy_fd, int timeout)
+smtp_proxy_tls(uschar * buf, size_t bsize, int * pfd, int timeout)
{
-fd_set fds;
-int max_fd = MAX(proxy_fd, tls_out.active) + 1;
+fd_set rfds, efds;
+int max_fd = MAX(pfd[0], tls_out.active) + 1;
int rc, i, fd_bits, nbytes;
+close(pfd[1]);
+if ((rc = fork()))
+ {
+ DEBUG(D_transport) debug_printf("proxy-proc final-pid %d\n", rc);
+ _exit(rc < 0 ? EXIT_FAILURE : EXIT_SUCCESS);
+ }
+
+if (running_in_test_harness) millisleep(100); /* let parent debug out */
set_process_info("proxying TLS connection for continued transport");
-FD_ZERO(&fds);
-FD_SET(tls_out.active, &fds);
-FD_SET(proxy_fd, &fds);
+FD_ZERO(&rfds);
+FD_SET(tls_out.active, &rfds);
+FD_SET(pfd[0], &rfds);
for (fd_bits = 3; fd_bits; )
{
time_t time_start = time(NULL);
/* wait for data */
+ efds = rfds;
do
{
struct timeval tv = { time_left, 0 };
- rc = select(max_fd, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &tv);
+ rc = select(max_fd,
+ (SELECT_ARG2_TYPE *)&rfds, NULL, (SELECT_ARG2_TYPE *)&efds, &tv);
if (rc < 0 && errno == EINTR)
if ((time_left -= time(NULL) - time_start) > 0) continue;
if (rc <= 0)
{
DEBUG(D_transport) if (rc == 0) debug_printf("%s: timed out\n", __FUNCTION__);
- return;
+ goto done;
+ }
+
+ if (FD_ISSET(tls_out.active, &efds) || FD_ISSET(pfd[0], &efds))
+ {
+ DEBUG(D_transport) debug_printf("select: exceptional cond on %s fd\n",
+ FD_ISSET(pfd[0], &efds) ? "proxy" : "tls");
+ goto done;
}
}
- while (rc < 0 || !(FD_ISSET(tls_out.active, &fds) || FD_ISSET(proxy_fd, &fds)));
+ while (rc < 0 || !(FD_ISSET(tls_out.active, &rfds) || FD_ISSET(pfd[0], &rfds)));
/* handle inbound data */
- if (FD_ISSET(tls_out.active, &fds))
+ if (FD_ISSET(tls_out.active, &rfds))
if ((rc = tls_read(FALSE, buf, bsize)) <= 0)
{
fd_bits &= ~1;
- FD_CLR(tls_out.active, &fds);
- shutdown(proxy_fd, SHUT_WR);
+ FD_CLR(tls_out.active, &rfds);
+ shutdown(pfd[0], SHUT_WR);
+ timeout = 5;
}
else
{
for (nbytes = 0; rc - nbytes > 0; nbytes += i)
- if ((i = write(proxy_fd, buf + nbytes, rc - nbytes)) < 0) return;
+ if ((i = write(pfd[0], buf + nbytes, rc - nbytes)) < 0) goto done;
}
else if (fd_bits & 1)
- FD_SET(tls_out.active, &fds);
+ FD_SET(tls_out.active, &rfds);
/* handle outbound data */
- if (FD_ISSET(proxy_fd, &fds))
- if ((rc = read(proxy_fd, buf, bsize)) <= 0)
+ if (FD_ISSET(pfd[0], &rfds))
+ if ((rc = read(pfd[0], buf, bsize)) <= 0)
{
- fd_bits &= ~2;
- FD_CLR(proxy_fd, &fds);
- shutdown(tls_out.active, SHUT_WR);
+ fd_bits = 0;
+ tls_close(FALSE, TRUE);
}
else
{
for (nbytes = 0; rc - nbytes > 0; nbytes += i)
- if ((i = tls_write(FALSE, buf + nbytes, rc - nbytes)) < 0) return;
+ if ((i = tls_write(FALSE, buf + nbytes, rc - nbytes, FALSE)) < 0)
+ goto done;
}
else if (fd_bits & 2)
- FD_SET(proxy_fd, &fds);
+ FD_SET(pfd[0], &rfds);
}
+
+done:
+ if (running_in_test_harness) millisleep(100); /* let logging complete */
+ exim_exit(0, US"TLS proxy");
}
#endif
failed by one of them.
host host to deliver to
host_af AF_INET or AF_INET6
- port default TCP/IP port to use, in host byte order
+ defport default TCP/IP port to use if host does not specify, in host
+ byte order
interface interface to bind to, or NULL
tblock transport instance block
message_defer set TRUE if yield is OK, but all addresses were deferred
*/
static int
-smtp_deliver(address_item *addrlist, host_item *host, int host_af, int port,
+smtp_deliver(address_item *addrlist, host_item *host, int host_af, int defport,
uschar *interface, transport_instance *tblock,
BOOL *message_defer, BOOL suppress_tls)
{
int yield = OK;
int save_errno;
int rc;
-time_t start_delivery_time = time(NULL);
+struct timeval start_delivery_time;
BOOL pass_message = FALSE;
uschar *message = NULL;
uschar new_message_id[MESSAGE_ID_LENGTH + 1];
-uschar *p;
smtp_context sx;
+gettimeofday(&start_delivery_time, NULL);
suppress_tls = suppress_tls; /* stop compiler warning when no TLS support */
*message_defer = FALSE;
sx.addrlist = addrlist;
sx.host = host;
sx.host_af = host_af,
-sx.port = port;
+sx.port = defport;
sx.interface = interface;
sx.helo_data = NULL;
sx.tblock = tblock;
if ( transport_filter_argv
&& *transport_filter_argv
&& **transport_filter_argv
- && sx.peer_offered & PEER_OFFERED_CHUNKING
+ && sx.peer_offered & OPTION_CHUNKING
)
{
- sx.peer_offered &= ~PEER_OFFERED_CHUNKING;
+ sx.peer_offered &= ~OPTION_CHUNKING;
DEBUG(D_transport) debug_printf("CHUNKING not usable due to transport filter\n");
}
}
if (mua_wrapper)
{
- address_item *badaddr;
- for (badaddr = sx.first_addr; badaddr; badaddr = badaddr->next)
- if (badaddr->transport_return != PENDING_OK)
+ address_item * a;
+ unsigned cnt;
+
+ for (a = sx.first_addr, cnt = 0; a && cnt < sx.max_rcpt; a = a->next, cnt++)
+ if (a->transport_return != PENDING_OK)
{
/*XXX could we find a better errno than 0 here? */
- set_errno_nohost(addrlist, 0, badaddr->message, FAIL,
- testflag(badaddr, af_pass_message));
+ set_errno_nohost(addrlist, 0, a->message, FAIL,
+ testflag(a, af_pass_message));
sx.ok = FALSE;
break;
}
If using CHUNKING, do not send a BDAT until we know how big a chunk we want
to send is. */
-if ( !(sx.peer_offered & PEER_OFFERED_CHUNKING)
+if ( !(sx.peer_offered & OPTION_CHUNKING)
&& (sx.ok || (pipelining_active && !mua_wrapper)))
{
- int count = smtp_write_command(&sx.outblock, FALSE, "DATA\r\n");
+ int count = smtp_write_command(&sx.outblock, SCMD_FLUSH, "DATA\r\n");
if (count < 0) goto SEND_FAILED;
switch(sync_responses(&sx, count, sx.ok ? +1 : -1))
well as body. Set the appropriate timeout value to be used for each chunk.
(Haven't been able to make it work using select() for writing yet.) */
-if (!(sx.peer_offered & PEER_OFFERED_CHUNKING) && !sx.ok)
+if (!(sx.peer_offered & OPTION_CHUNKING) && !sx.ok)
{
/* Save the first address of the next batch. */
sx.first_addr = sx.next_addr;
else
{
transport_ctx tctx = {
+ {sx.inblock.sock},
tblock,
addrlist,
US".", US"..", /* Escaping strings */
of responses. The callback needs a whole bunch of state so set up
a transport-context structure to be passed around. */
- if (sx.peer_offered & PEER_OFFERED_CHUNKING)
+ if (sx.peer_offered & OPTION_CHUNKING)
{
tctx.check_string = tctx.escape_string = NULL;
tctx.options |= topt_use_bdat;
transport_write_timeout = sx.ob->data_timeout;
smtp_command = US"sending data block"; /* For error messages */
DEBUG(D_transport|D_v)
- if (sx.peer_offered & PEER_OFFERED_CHUNKING)
+ if (sx.peer_offered & OPTION_CHUNKING)
debug_printf(" will write message using CHUNKING\n");
else
debug_printf(" SMTP>> writing message and terminating \".\"\n");
transport_count = 0;
#ifndef DISABLE_DKIM
- sx.ok = dkim_transport_write_message(sx.inblock.sock, &tctx, &sx.ob->dkim,
- CUSS &message);
+ sx.ok = dkim_transport_write_message(&tctx, &sx.ob->dkim, CUSS &message);
#else
- sx.ok = transport_write_message(sx.inblock.sock, &tctx, 0);
+ sx.ok = transport_write_message(&tctx, 0);
#endif
/* transport_write_message() uses write() because it is called from other
smtp_command = US"end of data";
- if (sx.peer_offered & PEER_OFFERED_CHUNKING && sx.cmd_count > 1)
+ if (sx.peer_offered & OPTION_CHUNKING && sx.cmd_count > 1)
{
/* Reap any outstanding MAIL & RCPT commands, but not a DATA-go-ahead */
switch(sync_responses(&sx, sx.cmd_count-1, 0))
if (sx.ok)
{
int flag = '=';
- int delivery_time = (int)(time(NULL) - start_delivery_time);
+ struct timeval delivery_time;
int len;
- uschar *conf = NULL;
+ uschar * conf = NULL;
+ timesince(&delivery_time, &start_delivery_time);
sx.send_rset = FALSE;
pipelining_active = FALSE;
{
const uschar *s = string_printing(sx.buffer);
/* deconst cast ok here as string_printing was checked to have alloc'n'copied */
- conf = (s == sx.buffer)? (uschar *)string_copy(s) : US s;
+ conf = (s == sx.buffer)? US string_copy(s) : US s;
}
/* Process all transported addresses - for LMTP or PRDR, read a status for
actual host that was used. */
addr->transport_return = OK;
- addr->more_errno = delivery_time;
+ addr->more_errno = delivery_time.tv_sec;
+ addr->delivery_usec = delivery_time.tv_usec;
addr->host_used = host;
addr->special_action = flag;
addr->message = conf;
#ifndef DISABLE_PRDR
- if (sx.prdr_active) addr->flags |= af_prdr_used;
+ if (sx.prdr_active) setflag(addr, af_prdr_used);
#endif
- if (sx.peer_offered & PEER_OFFERED_CHUNKING) addr->flags |= af_chunking_used;
+ if (sx.peer_offered & OPTION_CHUNKING) setflag(addr, af_chunking_used);
flag = '-';
#ifndef DISABLE_PRDR
set_rc = DEFER;
if (save_errno > 0)
message = US string_sprintf("%s: %s", message, strerror(save_errno));
- if (host->next != NULL) log_write(0, LOG_MAIN, "%s", message);
- msglog_line(host, message);
+
+ write_logs(host, message, sx.first_addr ? sx.first_addr->basic_errno : 0);
+
*message_defer = TRUE;
}
}
BOOL pass_message;
if (sx.send_rset)
- if (! (sx.ok = smtp_write_command(&sx.outblock, FALSE, "RSET\r\n") >= 0))
+ if (! (sx.ok = smtp_write_command(&sx.outblock, SCMD_FLUSH, "RSET\r\n") >= 0))
{
msg = US string_sprintf("send() to %s [%s] failed: %s", host->name,
host->address, strerror(errno));
continue_sequence++; /* Causes * in logging */
goto SEND_MESSAGE;
}
- if (continue_more) return yield; /* More addresses for another run */
- /* Pass the connection on to a new Exim process. */
+ /* Unless caller said it already has more messages listed for this host,
+ pass the connection on to a new Exim process (below, the call to
+ transport_pass_socket). If the caller has more ready, just return with
+ the connection still open. */
+
#ifdef SUPPORT_TLS
if (tls_out.active >= 0)
- if (verify_check_given_host(&sx.ob->hosts_noproxy_tls, host) == OK)
+ if ( continue_more
+ || verify_check_given_host(&sx.ob->hosts_noproxy_tls, host) == OK)
{
- /* Pass the socket, for direct use, to a new Exim process. Before
- doing so, we must shut down TLS. Not all MTAs allow for the
- continuation of the SMTP session when TLS is shut down. We test for
- this by sending a new EHLO. If we don't get a good response, we don't
- attempt to pass the socket on. */
+ /* Before passing the socket on, or returning to caller with it still
+ open, we must shut down TLS. Not all MTAs allow for the continuation
+ of the SMTP session when TLS is shut down. We test for this by sending
+ a new EHLO. If we don't get a good response, we don't attempt to pass
+ the socket on. */
tls_close(FALSE, TRUE);
smtp_peer_options = smtp_peer_options_wrap;
sx.ok = !sx.smtps
- && smtp_write_command(&sx.outblock, FALSE,
+ && smtp_write_command(&sx.outblock, SCMD_FLUSH,
"EHLO %s\r\n", sx.helo_data) >= 0
&& smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer),
'2', sx.ob->command_timeout);
+
+ if (sx.ok && continue_more)
+ return yield; /* More addresses for another run */
}
else
{
/* Set up a pipe for proxying TLS for the new transport process */
- smtp_peer_options |= PEER_OFFERED_TLS;
+ smtp_peer_options |= OPTION_TLS;
if (sx.ok = (socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) == 0))
socket_fd = pfd[1];
else
# endif
);
}
+ else
#endif
+ if (continue_more)
+ return yield; /* More addresses for another run */
/* If the socket is successfully passed, we mustn't send QUIT (or
indeed anything!) from here. */
{
sx.send_quit = FALSE;
- /* If TLS is still active, we need to proxy it for the transport we
+ /* We have passed the client socket to a fresh transport process.
+ If TLS is still active, we need to proxy it for the transport we
just passed the baton to. Fork a child to to do it, and return to
get logging done asap. Which way to place the work makes assumptions
about post-fork prioritisation which may not hold on all platforms. */
if (tls_out.active >= 0)
{
int pid = fork();
+ if (pid == 0) /* child; fork again to disconnect totally */
+ {
+ if (running_in_test_harness) millisleep(100); /* let parent debug out */
+ /* does not return */
+ smtp_proxy_tls(sx.buffer, sizeof(sx.buffer), pfd,
+ sx.ob->command_timeout);
+ }
+
if (pid > 0) /* parent */
{
+ DEBUG(D_transport) debug_printf("proxy-proc inter-pid %d\n", pid);
+ close(pfd[0]);
+ /* tidy the inter-proc to disconn the proxy proc */
waitpid(pid, NULL, 0);
tls_close(FALSE, FALSE);
(void)close(sx.inblock.sock);
continue_hostname = NULL;
return yield;
}
- else if (pid == 0) /* child; fork again to disconnect totally */
- {
- if ((pid = fork()))
- _exit(pid ? EXIT_FAILURE : EXIT_SUCCESS);
- smtp_proxy_tls(sx.buffer, sizeof(sx.buffer), pfd[0], sx.ob->command_timeout);
- exim_exit(0);
- }
+ log_write(0, LOG_PANIC_DIE, "fork failed");
}
#endif
}
operation, the old commented-out code was removed on 17-Sep-99. */
SEND_QUIT:
-if (sx.send_quit) (void)smtp_write_command(&sx.outblock, FALSE, "QUIT\r\n");
+if (sx.send_quit) (void)smtp_write_command(&sx.outblock, SCMD_FLUSH, "QUIT\r\n");
END_OFF:
outblock.cmd_count = 0;
outblock.authenticating = FALSE;
-(void)smtp_write_command(&outblock, FALSE, "QUIT\r\n");
+(void)smtp_write_command(&outblock, SCMD_FLUSH, "QUIT\r\n");
(void)smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
ob->command_timeout);
(void)close(inblock.sock);
address_item *addrlist) /* addresses we are working on */
{
int cutoff_retry;
-int port;
+int defport;
int hosts_defer = 0;
int hosts_fail = 0;
int hosts_looked_up = 0;
smtp_transport_options_block *ob =
(smtp_transport_options_block *)(tblock->options_block);
host_item *hostlist = addrlist->host_list;
-host_item *host = NULL;
+host_item *host;
DEBUG(D_transport)
{
{
debug_printf("hostlist:\n");
for (host = hostlist; host; host = host->next)
- debug_printf(" %s:%d\n", host->name, host->port);
+ debug_printf(" '%s' IP %s port %d\n", host->name, host->address, host->port);
}
if (continue_hostname)
debug_printf("already connected to %s [%s] (on fd %d)\n",
/* Sort out the default port. */
-if (!smtp_get_port(ob->port, addrlist, &port, tid)) return FALSE;
+if (!smtp_get_port(ob->port, addrlist, &defport, tid)) return FALSE;
/* For each host-plus-IP-address on the list:
{
host_item *nexthost = NULL;
int unexpired_hosts_tried = 0;
+ BOOL continue_host_tried = FALSE;
+retry_non_continued:
for (host = hostlist;
host
&& unexpired_hosts_tried < ob->hosts_max_try
/* Find by name if so configured, or if it's an IP address. We don't
just copy the IP address, because we need the test-for-local to happen. */
- flags = HOST_FIND_BY_A;
+ flags = HOST_FIND_BY_A | HOST_FIND_BY_AAAA;
if (ob->dns_qualify_single) flags |= HOST_FIND_QUALIFY_SINGLE;
if (ob->dns_search_parents) flags |= HOST_FIND_SEARCH_PARENTS;
result of the lookup. Set expired FALSE, to save the outer loop executing
twice. */
- if ( continue_hostname
- && ( Ustrcmp(continue_hostname, host->name) != 0
- || Ustrcmp(continue_host_address, host->address) != 0
- ) )
- {
- expired = FALSE;
- continue; /* With next host */
- }
+ if (continue_hostname)
+ if ( Ustrcmp(continue_hostname, host->name) != 0
+ || Ustrcmp(continue_host_address, host->address) != 0
+ )
+ {
+ expired = FALSE;
+ continue; /* With next host */
+ }
+ else
+ continue_host_tried = TRUE;
/* Reset the default next host in case a multihomed host whose addresses
are not looked up till just above added to the host list. */
the default. */
pistring = string_sprintf(":%d", host->port == PORT_NONE
- ? port : host->port);
+ ? defport : host->port);
if (Ustrcmp(pistring, ":25") == 0) pistring = US"";
/* Select IPv4 or IPv6, and choose an outgoing interface. If the interface
{
if ( !host->address
|| host->status != hstatus_unusable_expired
- || host->last_try > received_time)
+ || host->last_try > received_time.tv_sec)
continue;
DEBUG(D_transport) debug_printf("trying expired host %s [%s]%s\n",
host->name, host->address, pistring);
/* Attempt the delivery. */
total_hosts_tried++;
- rc = smtp_deliver(addrlist, thost, host_af, port, interface, tblock,
+ rc = smtp_deliver(addrlist, thost, host_af, defport, interface, tblock,
&message_defer, FALSE);
/* Yield is one of:
if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL
&& first_addr->basic_errno != ERRNO_TLSFAILURE)
- write_logs(first_addr, host);
+ write_logs(host, first_addr->message, first_addr->basic_errno);
#ifndef DISABLE_EVENT
if (rc == DEFER)
"%s: delivering unencrypted to H=%s [%s] (not in hosts_require_tls)",
first_addr->message, host->name, host->address);
first_addr = prepare_addresses(addrlist, host);
- rc = smtp_deliver(addrlist, thost, host_af, port, interface, tblock,
+ rc = smtp_deliver(addrlist, thost, host_af, defport, interface, tblock,
&message_defer, TRUE);
if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL)
- write_logs(first_addr, host);
+ write_logs(host, first_addr->message, first_addr->basic_errno);
# ifndef DISABLE_EVENT
if (rc == DEFER)
deferred_event_raise(first_addr, host);
for (last_rule = retry->rules;
last_rule->next;
last_rule = last_rule->next);
- timedout = time(NULL) - received_time > last_rule->timeout;
+ timedout = time(NULL) - received_time.tv_sec > last_rule->timeout;
}
else timedout = TRUE; /* No rule => timed out */
}
} /* End of loop for trying multiple hosts. */
+ /* If we failed to find a matching host in the list, for an already-open
+ connection, just close it and start over with the list. This can happen
+ for routing that changes from run to run, or big multi-IP sites with
+ round-robin DNS. */
+
+ if (continue_hostname && !continue_host_tried)
+ {
+ int fd = cutthrough.fd >= 0 ? cutthrough.fd : 0;
+
+ DEBUG(D_transport) debug_printf("no hosts match already-open connection\n");
+#ifdef SUPPORT_TLS
+ if (tls_out.active == fd)
+ {
+ (void) tls_write(FALSE, US"QUIT\r\n", 6, FALSE);
+ tls_close(FALSE, TRUE);
+ }
+ else
+#else
+ (void) write(fd, US"QUIT\r\n", 6);
+#endif
+ (void) close(fd);
+ cutthrough.fd = -1;
+ continue_hostname = NULL;
+ goto retry_non_continued;
+ }
+
/* This is the end of the loop that repeats iff expired is TRUE and
ob->delay_after_cutoff is FALSE. The second time round we will
try those hosts that haven't been tried since the message arrived. */
return TRUE; /* Each address has its status */
}
+#endif /*!MACRO_PREDEF*/
/* vi: aw ai sw=2
*/
/* End of transport/smtp.c */
projects / exim.git / blobdiff