-/* $Cambridge: exim/src/src/transports/smtp.c,v 1.12 2005/06/27 14:29:45 ph10 Exp $ */
-
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2005 */
+/* Copyright (c) University of Cambridge 1995 - 2016 */
/* See the file NOTICE for conditions of use and distribution. */
#include "../exim.h"
#define PENDING_DEFER (PENDING + DEFER)
#define PENDING_OK (PENDING + OK)
+#define DELIVER_BUFFER_SIZE 4096
+
/* Options specific to the smtp transport. This transport also supports LMTP
over TCP/IP. The options must be in alphabetic order (note that "_" comes
to be publicly visible; these are flagged with opt_public. */
optionlist smtp_transport_options[] = {
+ { "*expand_multi_domain", opt_stringptr | opt_hidden | opt_public,
+ (void *)offsetof(transport_instance, expand_multi_domain) },
+ { "*expand_retry_include_ip_address", opt_stringptr | opt_hidden,
+ (void *)(offsetof(smtp_transport_options_block, expand_retry_include_ip_address)) },
+
+ { "address_retry_include_sender", opt_bool,
+ (void *)offsetof(smtp_transport_options_block, address_retry_include_sender) },
{ "allow_localhost", opt_bool,
(void *)offsetof(smtp_transport_options_block, allow_localhost) },
{ "authenticated_sender", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, authenticated_sender) },
+ { "authenticated_sender_force", opt_bool,
+ (void *)offsetof(smtp_transport_options_block, authenticated_sender_force) },
{ "command_timeout", opt_time,
(void *)offsetof(smtp_transport_options_block, command_timeout) },
{ "connect_timeout", opt_time,
(void *)offsetof(smtp_transport_options_block, data_timeout) },
{ "delay_after_cutoff", opt_bool,
(void *)offsetof(smtp_transport_options_block, delay_after_cutoff) },
-#ifdef EXPERIMENTAL_DOMAINKEYS
- { "dk_canon", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dk_canon) },
- { "dk_domain", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dk_domain) },
- { "dk_headers", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dk_headers) },
- { "dk_private_key", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dk_private_key) },
- { "dk_selector", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dk_selector) },
- { "dk_strict", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dk_strict) },
+#ifndef DISABLE_DKIM
+ { "dkim_canon", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_canon) },
+ { "dkim_domain", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_domain) },
+ { "dkim_private_key", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_private_key) },
+ { "dkim_selector", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_selector) },
+ { "dkim_sign_headers", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_sign_headers) },
+ { "dkim_strict", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dkim.dkim_strict) },
#endif
{ "dns_qualify_single", opt_bool,
(void *)offsetof(smtp_transport_options_block, dns_qualify_single) },
{ "dns_search_parents", opt_bool,
(void *)offsetof(smtp_transport_options_block, dns_search_parents) },
+ { "dnssec_request_domains", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dnssec.request) },
+ { "dnssec_require_domains", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dnssec.require) },
+ { "dscp", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, dscp) },
{ "fallback_hosts", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, fallback_hosts) },
{ "final_timeout", opt_time,
(void *)offsetof(smtp_transport_options_block, hosts) },
{ "hosts_avoid_esmtp", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_avoid_esmtp) },
- #ifdef SUPPORT_TLS
+ { "hosts_avoid_pipelining", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_avoid_pipelining) },
+#ifdef SUPPORT_TLS
{ "hosts_avoid_tls", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_avoid_tls) },
- #endif
+#endif
{ "hosts_max_try", opt_int,
(void *)offsetof(smtp_transport_options_block, hosts_max_try) },
{ "hosts_max_try_hardlimit", opt_int,
(void *)offsetof(smtp_transport_options_block, hosts_max_try_hardlimit) },
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
{ "hosts_nopass_tls", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_nopass_tls) },
- #endif
+#endif
{ "hosts_override", opt_bool,
(void *)offsetof(smtp_transport_options_block, hosts_override) },
{ "hosts_randomize", opt_bool,
(void *)offsetof(smtp_transport_options_block, hosts_randomize) },
+#if defined(SUPPORT_TLS) && !defined(DISABLE_OCSP)
+ { "hosts_request_ocsp", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_request_ocsp) },
+#endif
{ "hosts_require_auth", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_require_auth) },
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
+# ifdef EXPERIMENTAL_DANE
+ { "hosts_require_dane", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_require_dane) },
+# endif
+# ifndef DISABLE_OCSP
+ { "hosts_require_ocsp", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_require_ocsp) },
+# endif
{ "hosts_require_tls", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_require_tls) },
- #endif
+#endif
{ "hosts_try_auth", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, hosts_try_auth) },
+ { "hosts_try_chunking", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_try_chunking) },
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+ { "hosts_try_dane", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_try_dane) },
+#endif
+#ifndef DISABLE_PRDR
+ { "hosts_try_prdr", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_try_prdr) },
+#endif
+#ifdef SUPPORT_TLS
+ { "hosts_verify_avoid_tls", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, hosts_verify_avoid_tls) },
+#endif
{ "interface", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, interface) },
{ "keepalive", opt_bool,
(void *)offsetof(smtp_transport_options_block, keepalive) },
+ { "lmtp_ignore_quota", opt_bool,
+ (void *)offsetof(smtp_transport_options_block, lmtp_ignore_quota) },
{ "max_rcpt", opt_int | opt_public,
(void *)offsetof(transport_instance, max_addresses) },
- { "multi_domain", opt_bool | opt_public,
+ { "multi_domain", opt_expand_bool | opt_public,
(void *)offsetof(transport_instance, multi_domain) },
{ "port", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, port) },
{ "protocol", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, protocol) },
- { "retry_include_ip_address", opt_bool,
+ { "retry_include_ip_address", opt_expand_bool,
(void *)offsetof(smtp_transport_options_block, retry_include_ip_address) },
{ "serialize_hosts", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, serialize_hosts) },
{ "size_addition", opt_int,
(void *)offsetof(smtp_transport_options_block, size_addition) }
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_SOCKS
+ ,{ "socks_proxy", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, socks_proxy) }
+#endif
+#ifdef SUPPORT_TLS
,{ "tls_certificate", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, tls_certificate) },
{ "tls_crl", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, tls_crl) },
+ { "tls_dh_min_bits", opt_int,
+ (void *)offsetof(smtp_transport_options_block, tls_dh_min_bits) },
{ "tls_privatekey", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, tls_privatekey) },
- { "tls_require_ciphers", opt_stringptr,
+ { "tls_require_ciphers", opt_stringptr,
(void *)offsetof(smtp_transport_options_block, tls_require_ciphers) },
+ { "tls_sni", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, tls_sni) },
{ "tls_tempfail_tryclear", opt_bool,
(void *)offsetof(smtp_transport_options_block, tls_tempfail_tryclear) },
+ { "tls_try_verify_hosts", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, tls_try_verify_hosts) },
+ { "tls_verify_cert_hostnames", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block,tls_verify_cert_hostnames)},
{ "tls_verify_certificates", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_verify_certificates) }
- #endif
+ (void *)offsetof(smtp_transport_options_block, tls_verify_certificates) },
+ { "tls_verify_hosts", opt_stringptr,
+ (void *)offsetof(smtp_transport_options_block, tls_verify_hosts) }
+#endif
};
/* Size of the options list. An extern variable has to be used so that its
NULL, /* interface */
NULL, /* port */
US"smtp", /* protocol */
+ NULL, /* DSCP */
NULL, /* serialize_hosts */
NULL, /* hosts_try_auth */
NULL, /* hosts_require_auth */
+ US"*", /* hosts_try_chunking */
+#ifdef EXPERIMENTAL_DANE
+ NULL, /* hosts_try_dane */
+ NULL, /* hosts_require_dane */
+#endif
+#ifndef DISABLE_PRDR
+ US"*", /* hosts_try_prdr */
+#endif
+#ifndef DISABLE_OCSP
+ US"*", /* hosts_request_ocsp (except under DANE; tls_client_start()) */
+ NULL, /* hosts_require_ocsp */
+#endif
NULL, /* hosts_require_tls */
NULL, /* hosts_avoid_tls */
+ NULL, /* hosts_verify_avoid_tls */
+ NULL, /* hosts_avoid_pipelining */
NULL, /* hosts_avoid_esmtp */
NULL, /* hosts_nopass_tls */
5*60, /* command_timeout */
1024, /* size_addition */
5, /* hosts_max_try */
50, /* hosts_max_try_hardlimit */
+ TRUE, /* address_retry_include_sender */
FALSE, /* allow_localhost */
+ FALSE, /* authenticated_sender_force */
FALSE, /* gethostbyname */
TRUE, /* dns_qualify_single */
FALSE, /* dns_search_parents */
+ { NULL, NULL }, /* dnssec_domains {request,require} */
TRUE, /* delay_after_cutoff */
FALSE, /* hosts_override */
FALSE, /* hosts_randomize */
TRUE, /* keepalive */
+ FALSE, /* lmtp_ignore_quota */
+ NULL, /* expand_retry_include_ip_address */
TRUE /* retry_include_ip_address */
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_SOCKS
+ ,NULL /* socks_proxy */
+#endif
+#ifdef SUPPORT_TLS
,NULL, /* tls_certificate */
NULL, /* tls_crl */
NULL, /* tls_privatekey */
NULL, /* tls_require_ciphers */
- NULL, /* tls_verify_certificates */
- TRUE /* tls_tempfail_tryclear */
- #endif
- #ifdef EXPERIMENTAL_DOMAINKEYS
- ,NULL, /* dk_canon */
- NULL, /* dk_domain */
- NULL, /* dk_headers */
- NULL, /* dk_private_key */
- NULL, /* dk_selector */
- NULL /* dk_strict */
- #endif
+ NULL, /* tls_sni */
+ US"system", /* tls_verify_certificates */
+ EXIM_CLIENT_DH_DEFAULT_MIN_BITS,
+ /* tls_dh_min_bits */
+ TRUE, /* tls_tempfail_tryclear */
+ NULL, /* tls_verify_hosts */
+ US"*", /* tls_try_verify_hosts */
+ US"*" /* tls_verify_cert_hostnames */
+#endif
+#ifndef DISABLE_DKIM
+ , {NULL, /* dkim_canon */
+ NULL, /* dkim_domain */
+ NULL, /* dkim_private_key */
+ NULL, /* dkim_selector */
+ NULL, /* dkim_sign_headers */
+ NULL, /* dkim_strict */
+ FALSE} /* dot_stuffed */
+#endif
};
+/* some DSN flags for use later */
+
+static int rf_list[] = {rf_notify_never, rf_notify_success,
+ rf_notify_failure, rf_notify_delay };
+
+static uschar *rf_names[] = { US"NEVER", US"SUCCESS", US"FAILURE", US"DELAY" };
+
+
/* Local statics */
static uschar *smtp_command; /* Points to last cmd for error messages */
static uschar *mail_command; /* Points to MAIL cmd for error messages */
+static BOOL update_waiting; /* TRUE to update the "wait" database */
+static BOOL pipelining_active; /* current transaction is in pipe mode */
+static int off = 0; /* for use by setsockopt */
/*************************************************
but before running it in a sub-process. It is used for two things:
(1) To set the fallback host list in addresses, when delivering.
- (2) To pass back the interface, port, and protocol options, for use during
- callout verification.
+ (2) To pass back the interface, port, protocol, and other options, for use
+ during callout verification.
Arguments:
tblock pointer to the transport instance block
addrlist list of addresses about to be transported
tf if not NULL, pointer to block in which to return options
+ uid the uid that will be set (not used)
+ gid the gid that will be set (not used)
errmsg place for error message (not used)
Returns: OK always (FAIL, DEFER not used)
static int
smtp_transport_setup(transport_instance *tblock, address_item *addrlist,
- transport_feedback *tf, uschar **errmsg)
+ transport_feedback *tf, uid_t uid, gid_t gid, uschar **errmsg)
{
smtp_transport_options_block *ob =
(smtp_transport_options_block *)(tblock->options_block);
errmsg = errmsg; /* Keep picky compilers happy */
+uid = uid;
+gid = gid;
/* Pass back options if required. This interface is getting very messy. */
tf->gethostbyname = ob->gethostbyname;
tf->qualify_single = ob->dns_qualify_single;
tf->search_parents = ob->dns_search_parents;
+ tf->helo_data = ob->helo_data;
}
/* Set the fallback host list for all the addresses that don't have fallback
/* Set the default port according to the protocol */
if (ob->port == NULL)
- ob->port = (strcmpic(ob->protocol, US"lmtp") == 0)? US"lmtp" : US"smtp";
+ ob->port = (strcmpic(ob->protocol, US"lmtp") == 0)? US"lmtp" :
+ (strcmpic(ob->protocol, US"smtps") == 0)? US"smtps" : US"smtp";
/* Set up the setup entry point, to be called before subprocesses for this
transport. */
msg to put in each address's message field
rc to put in each address's transport_return field
pass_message if TRUE, set the "pass message" flag in the address
+ host if set, mark addrs as having used this host
+ smtp_greeting from peer
+ helo_response from peer
If errno_value has the special value ERRNO_CONNECTTIMEOUT, ETIMEDOUT is put in
the errno field, and RTEF_CTOUT is ORed into the more_errno field, to indicate
Returns: nothing
*/
-static
-void set_errno(address_item *addrlist, int errno_value, uschar *msg, int rc,
- BOOL pass_message)
+static void
+set_errno(address_item *addrlist, int errno_value, uschar *msg, int rc,
+ BOOL pass_message, host_item * host
+#ifdef EXPERIMENTAL_DSN_INFO
+ , const uschar * smtp_greeting, const uschar * helo_response
+#endif
+ )
{
address_item *addr;
int orvalue = 0;
errno_value = ETIMEDOUT;
orvalue = RTEF_CTOUT;
}
-for (addr = addrlist; addr != NULL; addr = addr->next)
- {
- if (addr->transport_return < PENDING) continue;
- addr->basic_errno = errno_value;
- addr->more_errno |= orvalue;
- if (msg != NULL)
+for (addr = addrlist; addr; addr = addr->next)
+ if (addr->transport_return >= PENDING)
{
- addr->message = msg;
- if (pass_message) setflag(addr, af_pass_message);
+ addr->basic_errno = errno_value;
+ addr->more_errno |= orvalue;
+ if (msg != NULL)
+ {
+ addr->message = msg;
+ if (pass_message) setflag(addr, af_pass_message);
+ }
+ addr->transport_return = rc;
+ if (host)
+ {
+ addr->host_used = host;
+#ifdef EXPERIMENTAL_DSN_INFO
+ if (smtp_greeting)
+ {uschar * s = Ustrchr(smtp_greeting, '\n'); if (s) *s = '\0';}
+ addr->smtp_greeting = smtp_greeting;
+
+ if (helo_response)
+ {uschar * s = Ustrchr(helo_response, '\n'); if (s) *s = '\0';}
+ addr->helo_response = helo_response;
+#endif
+ }
}
- addr->transport_return = rc;
- }
}
+static void
+set_errno_nohost(address_item *addrlist, int errno_value, uschar *msg, int rc,
+ BOOL pass_message)
+{
+set_errno(addrlist, errno_value, msg, rc, pass_message, NULL
+#ifdef EXPERIMENTAL_DSN_INFO
+ , NULL, NULL
+#endif
+ );
+}
/*************************************************
Returns: TRUE if an SMTP "QUIT" command should be sent, else FALSE
*/
-static BOOL check_response(host_item *host, int *errno_value, int more_errno,
+static BOOL
+check_response(host_item *host, int *errno_value, int more_errno,
uschar *buffer, int *yield, uschar **message, BOOL *pass_message)
{
-uschar *pl = US"";
-
-if (smtp_use_pipelining &&
- (Ustrcmp(smtp_command, "MAIL") == 0 ||
- Ustrcmp(smtp_command, "RCPT") == 0 ||
- Ustrcmp(smtp_command, "DATA") == 0))
- pl = US"pipelined ";
+uschar * pl = pipelining_active ? US"pipelined " : US"";
*yield = '4'; /* Default setting is to give a temporary error */
if (*errno_value == ETIMEDOUT)
{
- *message = US string_sprintf("SMTP timeout while connected to %s [%s] "
- "after %s%s", host->name, host->address, pl, smtp_command);
+ *message = US string_sprintf("SMTP timeout after %s%s",
+ pl, smtp_command);
if (transport_count > 0)
*message = US string_sprintf("%s (%d bytes written)", *message,
transport_count);
if (*errno_value == ERRNO_SMTPFORMAT)
{
- uschar *malfresp = string_printing(buffer);
+ const uschar *malfresp = string_printing(buffer);
while (isspace(*malfresp)) malfresp++;
- if (*malfresp == 0)
- *message = string_sprintf("Malformed SMTP reply (an empty line) from "
- "%s [%s] in response to %s%s", host->name, host->address, pl,
- smtp_command);
- else
- *message = string_sprintf("Malformed SMTP reply from %s [%s] in response "
- "to %s%s: %s", host->name, host->address, pl, smtp_command, malfresp);
+ *message = *malfresp == 0
+ ? string_sprintf("Malformed SMTP reply (an empty line) "
+ "in response to %s%s", pl, smtp_command)
+ : string_sprintf("Malformed SMTP reply in response to %s%s: %s",
+ pl, smtp_command, malfresp);
return FALSE;
}
return FALSE;
}
+#ifdef SUPPORT_I18N
+/* Handle lack of advertised SMTPUTF8, for international message */
+if (*errno_value == ERRNO_UTF8_FWD)
+ {
+ *message = US string_sprintf("utf8 support required but not offered for forwarding");
+ DEBUG(D_deliver|D_transport) debug_printf("%s\n", *message);
+ return TRUE;
+ }
+#endif
+
/* Handle error responses from the remote mailer. */
if (buffer[0] != 0)
{
- uschar *s = string_printing(buffer);
+ const uschar *s = string_printing(buffer);
*message = US string_sprintf("SMTP error from remote mail server after %s%s: "
- "host %s [%s]: %s", pl, smtp_command, host->name, host->address, s);
+ "%s", pl, smtp_command, s);
*pass_message = TRUE;
*yield = buffer[0];
return TRUE;
}
/* No data was read. If there is no errno, this must be the EOF (i.e.
-connection closed) case, which causes deferral. Otherwise, put the host's
-identity in the message, leaving the errno value to be interpreted as well. In
-all cases, we have to assume the connection is now dead. */
+connection closed) case, which causes deferral. An explicit connection reset
+error has the same effect. Otherwise, put the host's identity in the message,
+leaving the errno value to be interpreted as well. In all cases, we have to
+assume the connection is now dead. */
-if (*errno_value == 0)
+if (*errno_value == 0 || *errno_value == ECONNRESET)
{
*errno_value = ERRNO_SMTPCLOSED;
- *message = US string_sprintf("Remote host %s [%s] closed connection "
- "in response to %s%s", host->name, host->address, pl, smtp_command);
+ *message = US string_sprintf("Remote host closed connection "
+ "in response to %s%s", pl, smtp_command);
}
else *message = US string_sprintf("%s [%s]", host->name, host->address);
static void
write_logs(address_item *addr, host_item *host)
{
-if (addr->message != NULL)
+uschar * message = LOGGING(outgoing_port)
+ ? string_sprintf("H=%s [%s]:%d", host->name, host->address,
+ host->port == PORT_NONE ? 25 : host->port)
+ : string_sprintf("H=%s [%s]", host->name, host->address);
+
+if (addr->message)
{
- uschar *message = addr->message;
+ message = string_sprintf("%s: %s", message, addr->message);
if (addr->basic_errno > 0)
message = string_sprintf("%s: %s", message, strerror(addr->basic_errno));
log_write(0, LOG_MAIN, "%s", message);
}
else
{
- log_write(0, LOG_MAIN, "%s [%s]: %s",
- host->name,
- host->address,
- strerror(addr->basic_errno));
- deliver_msglog("%s %s [%s]: %s\n",
- tod_stamp(tod_log),
- host->name,
- host->address,
- strerror(addr->basic_errno));
+ const uschar * s = exim_errstr(addr->basic_errno);
+ log_write(0, LOG_MAIN, "%s %s", message, s);
+ deliver_msglog("%s %s %s\n", tod_stamp(tod_log), message, s);
}
}
+static void
+msglog_line(host_item * host, uschar * message)
+{
+deliver_msglog("%s H=%s [%s] %s\n", tod_stamp(tod_log),
+ host->name, host->address, message);
+}
+
+
+
+#ifndef DISABLE_EVENT
+/*************************************************
+* Post-defer action *
+*************************************************/
+
+/* This expands an arbitrary per-transport string.
+ It might, for example, be used to write to the database log.
+
+Arguments:
+ addr the address item containing error information
+ host the current host
+
+Returns: nothing
+*/
+static void
+deferred_event_raise(address_item *addr, host_item *host)
+{
+uschar * action = addr->transport->event_action;
+const uschar * save_domain;
+uschar * save_local;
+
+if (!action)
+ return;
+
+save_domain = deliver_domain;
+save_local = deliver_localpart;
+
+/*XXX would ip & port already be set up? */
+deliver_host_address = string_copy(host->address);
+deliver_host_port = host->port == PORT_NONE ? 25 : host->port;
+event_defer_errno = addr->basic_errno;
+
+router_name = addr->router->name;
+transport_name = addr->transport->name;
+deliver_domain = addr->domain;
+deliver_localpart = addr->local_part;
+
+(void) event_raise(action, US"msg:host:defer",
+ addr->message
+ ? addr->basic_errno > 0
+ ? string_sprintf("%s: %s", addr->message, strerror(addr->basic_errno))
+ : string_copy(addr->message)
+ : addr->basic_errno > 0
+ ? string_copy(US strerror(addr->basic_errno))
+ : NULL);
+
+deliver_localpart = save_local;
+deliver_domain = save_domain;
+router_name = transport_name = NULL;
+}
+#endif
/*************************************************
* Synchronize SMTP responses *
converted to OK at the end.
Arguments:
- addrlist the complete address list
- include_affixes TRUE if affixes include in RCPT
- sync_addr ptr to the ptr of the one to start scanning at (updated)
- host the host we are connected to
- count the number of responses to read
- pending_MAIL true if the first response is for MAIL
- pending_DATA 0 if last command sent was not DATA
- +1 if previously had a good recipient
- -1 if not previously had a good recipient
- inblock incoming SMTP block
- timeout timeout value
- buffer buffer for reading response
- buffsize size of buffer
+ addrlist the complete address list
+ include_affixes TRUE if affixes include in RCPT
+ sync_addr ptr to the ptr of the one to start scanning at (updated)
+ host the host we are connected to
+ count the number of responses to read
+ address_retry_
+ include_sender true if 4xx retry is to include the sender it its key
+ pending_MAIL true if the first response is for MAIL
+ pending_DATA 0 if last command sent was not DATA
+ +1 if previously had a good recipient
+ -1 if not previously had a good recipient
+ inblock incoming SMTP block
+ timeout timeout value
+ buffer buffer for reading response
+ buffsize size of buffer
Returns: 3 if at least one address had 2xx and one had 5xx
2 if at least one address had 5xx but none had 2xx
static int
sync_responses(address_item *addrlist, BOOL include_affixes,
- address_item **sync_addr, host_item *host, int count, BOOL pending_MAIL,
+ address_item **sync_addr, host_item *host, int count,
+ BOOL address_retry_include_sender, BOOL pending_MAIL,
int pending_DATA, smtp_inblock *inblock, int timeout, uschar *buffer,
int buffsize)
{
count--;
if (!smtp_read_response(inblock, buffer, buffsize, '2', timeout))
{
+ DEBUG(D_transport) debug_printf("bad response for MAIL\n");
Ustrcpy(big_buffer, mail_command); /* Fits, because it came from there! */
if (errno == 0 && buffer[0] != 0)
{
uschar flushbuffer[4096];
+ int save_errno = 0;
+ if (buffer[0] == '4')
+ {
+ save_errno = ERRNO_MAIL4XX;
+ addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ }
while (count-- > 0)
{
if (!smtp_read_response(inblock, flushbuffer, sizeof(flushbuffer),
&& (errno != 0 || flushbuffer[0] == 0))
break;
}
+ errno = save_errno;
+ }
+
+ if (pending_DATA) count--; /* Number of RCPT responses to come */
+ while (count-- > 0) /* Mark any pending addrs with the host used */
+ {
+ while (addr->transport_return != PENDING_DEFER) addr = addr->next;
+ addr->host_used = host;
+ addr = addr->next;
}
return -3;
}
while (addr->transport_return != PENDING_DEFER) addr = addr->next;
/* The address was accepted */
+ addr->host_used = host;
if (smtp_read_response(inblock, buffer, buffsize, '2', timeout))
{
addr->transport_return = PENDING_OK;
/* If af_dr_retry_exists is set, there was a routing delay on this address;
- ensure that any address-specific retry record is expunged. */
+ ensure that any address-specific retry record is expunged. We do this both
+ for the basic key and for the version that also includes the sender. */
if (testflag(addr, af_dr_retry_exists))
+ {
+ uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key,
+ sender_address);
+ retry_add_item(addr, altkey, rf_delete);
retry_add_item(addr, addr->address_retry_key, rf_delete);
+ }
}
/* Timeout while reading the response */
else if (errno == ETIMEDOUT)
{
- int save_errno = errno;
- uschar *message = string_sprintf("SMTP timeout while connected to %s [%s] "
- "after RCPT TO:<%s>", host->name, host->address,
- transport_rcpt_address(addr, include_affixes));
- set_errno(addrlist, save_errno, message, DEFER, FALSE);
+ uschar *message = string_sprintf("SMTP timeout after RCPT TO:<%s>",
+ transport_rcpt_address(addr, include_affixes));
+ set_errno_nohost(addrlist, ETIMEDOUT, message, DEFER, FALSE);
retry_add_item(addr, addr->address_retry_key, 0);
- host->update_waiting = FALSE;
+ update_waiting = FALSE;
return -1;
}
{
addr->message =
string_sprintf("SMTP error from remote mail server after RCPT TO:<%s>: "
- "host %s [%s]: %s", transport_rcpt_address(addr, include_affixes),
- host->name, host->address, string_printing(buffer));
+ "%s", transport_rcpt_address(addr, include_affixes),
+ string_printing(buffer));
setflag(addr, af_pass_message);
- deliver_msglog("%s %s\n", tod_stamp(tod_log), addr->message);
+ msglog_line(host, addr->message);
/* The response was 5xx */
else
{
- int bincode = (buffer[1] - '0')*10 + buffer[2] - '0';
-
addr->transport_return = DEFER;
addr->basic_errno = ERRNO_RCPT4XX;
- addr->more_errno |= bincode << 8;
+ addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
- /* Log temporary errors if there are more hosts to be tried. */
+#ifndef DISABLE_EVENT
+ event_defer_errno = addr->more_errno;
+ msg_event_raise(US"msg:rcpt:host:defer", addr);
+#endif
- if (host->next != NULL) log_write(0, LOG_MAIN, "%s", addr->message);
+ /* Log temporary errors if there are more hosts to be tried.
+ If not, log this last one in the == line. */
- /* Do not put this message on the list of those waiting for this host,
- as otherwise it is likely to be tried too often. */
+ if (host->next)
+ log_write(0, LOG_MAIN, "H=%s [%s]: %s", host->name, host->address, addr->message);
- host->update_waiting = FALSE;
+#ifndef DISABLE_EVENT
+ else
+ msg_event_raise(US"msg:rcpt:defer", addr);
+#endif
- /* Add a retry item for the address so that it doesn't get tried
- again too soon. */
+ /* Do not put this message on the list of those waiting for specific
+ hosts, as otherwise it is likely to be tried too often. */
- retry_add_item(addr, addr->address_retry_key, 0);
+ update_waiting = FALSE;
+
+ /* Add a retry item for the address so that it doesn't get tried again
+ too soon. If address_retry_include_sender is true, add the sender address
+ to the retry key. */
+
+ if (address_retry_include_sender)
+ {
+ uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key,
+ sender_address);
+ retry_add_item(addr, altkey, 0);
+ }
+ else retry_add_item(addr, addr->address_retry_key, 0);
}
}
} /* Loop for next RCPT response */
int code;
uschar *msg;
BOOL pass_message;
- if (pending_DATA > 0 || (yield & 1) != 0) return -3;
+ if (pending_DATA > 0 || (yield & 1) != 0)
+ {
+ if (errno == 0 && buffer[0] == '4')
+ {
+ errno = ERRNO_DATA4XX;
+ addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ }
+ return -3;
+ }
(void)check_response(host, &errno, 0, buffer, &code, &msg, &pass_message);
DEBUG(D_transport) debug_printf("%s\nerror for DATA ignored: pipelining "
"is in use and there were no good recipients\n", msg);
+/* Do the client side of smtp-level authentication */
+/*
+Arguments:
+ buffer EHLO response from server (gets overwritten)
+ addrlist chain of potential addresses to deliver
+ host host to deliver to
+ ob transport options
+ ibp, obp comms channel control blocks
+
+Returns:
+ OK Success, or failed (but not required): global "smtp_authenticated" set
+ DEFER Failed authentication (and was required)
+ ERROR Internal problem
+
+ FAIL_SEND Failed communications - transmit
+ FAIL - response
+*/
+
+int
+smtp_auth(uschar *buffer, unsigned bufsize, address_item *addrlist, host_item *host,
+ smtp_transport_options_block *ob, BOOL is_esmtp,
+ smtp_inblock *ibp, smtp_outblock *obp)
+{
+int require_auth;
+uschar *fail_reason = US"server did not advertise AUTH support";
+
+smtp_authenticated = FALSE;
+client_authenticator = client_authenticated_id = client_authenticated_sender = NULL;
+require_auth = verify_check_given_host(&ob->hosts_require_auth, host);
+
+if (is_esmtp && !regex_AUTH) regex_AUTH =
+ regex_must_compile(US"\\n250[\\s\\-]AUTH\\s+([\\-\\w\\s]+)(?:\\n|$)",
+ FALSE, TRUE);
+
+if (is_esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1))
+ {
+ uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]);
+ expand_nmax = -1; /* reset */
+
+ /* Must not do this check until after we have saved the result of the
+ regex match above. */
+
+ if (require_auth == OK ||
+ verify_check_given_host(&ob->hosts_try_auth, host) == OK)
+ {
+ auth_instance *au;
+ fail_reason = US"no common mechanisms were found";
+
+ DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n");
+
+ /* Scan the configured authenticators looking for one which is configured
+ for use as a client, which is not suppressed by client_condition, and
+ whose name matches an authentication mechanism supported by the server.
+ If one is found, attempt to authenticate by calling its client function.
+ */
+
+ for (au = auths; !smtp_authenticated && au != NULL; au = au->next)
+ {
+ uschar *p = names;
+ if (!au->client ||
+ (au->client_condition != NULL &&
+ !expand_check_condition(au->client_condition, au->name,
+ US"client authenticator")))
+ {
+ DEBUG(D_transport) debug_printf("skipping %s authenticator: %s\n",
+ au->name,
+ (au->client)? "client_condition is false" :
+ "not configured as a client");
+ continue;
+ }
+
+ /* Loop to scan supported server mechanisms */
+
+ while (*p != 0)
+ {
+ int rc;
+ int len = Ustrlen(au->public_name);
+ while (isspace(*p)) p++;
+
+ if (strncmpic(au->public_name, p, len) != 0 ||
+ (p[len] != 0 && !isspace(p[len])))
+ {
+ while (*p != 0 && !isspace(*p)) p++;
+ continue;
+ }
+
+ /* Found data for a listed mechanism. Call its client entry. Set
+ a flag in the outblock so that data is overwritten after sending so
+ that reflections don't show it. */
+
+ fail_reason = US"authentication attempt(s) failed";
+ obp->authenticating = TRUE;
+ rc = (au->info->clientcode)(au, ibp, obp,
+ ob->command_timeout, buffer, bufsize);
+ obp->authenticating = FALSE;
+ DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n",
+ au->name, rc);
+
+ /* A temporary authentication failure must hold up delivery to
+ this host. After a permanent authentication failure, we carry on
+ to try other authentication methods. If all fail hard, try to
+ deliver the message unauthenticated unless require_auth was set. */
+
+ switch(rc)
+ {
+ case OK:
+ smtp_authenticated = TRUE; /* stops the outer loop */
+ client_authenticator = au->name;
+ if (au->set_client_id != NULL)
+ client_authenticated_id = expand_string(au->set_client_id);
+ break;
+
+ /* Failure after writing a command */
+
+ case FAIL_SEND:
+ return FAIL_SEND;
+
+ /* Failure after reading a response */
+
+ case FAIL:
+ if (errno != 0 || buffer[0] != '5') return FAIL;
+ log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s",
+ au->name, host->name, host->address, buffer);
+ break;
+
+ /* Failure by some other means. In effect, the authenticator
+ decided it wasn't prepared to handle this case. Typically this
+ is the result of "fail" in an expansion string. Do we need to
+ log anything here? Feb 2006: a message is now put in the buffer
+ if logging is required. */
+
+ case CANCELLED:
+ if (*buffer != 0)
+ log_write(0, LOG_MAIN, "%s authenticator cancelled "
+ "authentication H=%s [%s] %s", au->name, host->name,
+ host->address, buffer);
+ break;
+
+ /* Internal problem, message in buffer. */
+
+ case ERROR:
+ set_errno_nohost(addrlist, ERRNO_AUTHPROB, string_copy(buffer),
+ DEFER, FALSE);
+ return ERROR;
+ }
+
+ break; /* If not authenticated, try next authenticator */
+ } /* Loop for scanning supported server mechanisms */
+ } /* Loop for further authenticators */
+ }
+ }
+
+/* If we haven't authenticated, but are required to, give up. */
+
+if (require_auth == OK && !smtp_authenticated)
+ {
+ set_errno_nohost(addrlist, ERRNO_AUTHFAIL,
+ string_sprintf("authentication required but %s", fail_reason), DEFER,
+ FALSE);
+ return DEFER;
+ }
+
+return OK;
+}
+
+
+/* Construct AUTH appendix string for MAIL TO */
+/*
+Arguments
+ buffer to build string
+ addrlist chain of potential addresses to deliver
+ ob transport options
+
+Globals smtp_authenticated
+ client_authenticated_sender
+Return True on error, otherwise buffer has (possibly empty) terminated string
+*/
+
+BOOL
+smtp_mail_auth_str(uschar *buffer, unsigned bufsize, address_item *addrlist,
+ smtp_transport_options_block *ob)
+{
+uschar *local_authenticated_sender = authenticated_sender;
+
+#ifdef notdef
+ debug_printf("smtp_mail_auth_str: as<%s> os<%s> SA<%s>\n", authenticated_sender, ob->authenticated_sender, smtp_authenticated?"Y":"N");
+#endif
+
+if (ob->authenticated_sender != NULL)
+ {
+ uschar *new = expand_string(ob->authenticated_sender);
+ if (new == NULL)
+ {
+ if (!expand_string_forcedfail)
+ {
+ uschar *message = string_sprintf("failed to expand "
+ "authenticated_sender: %s", expand_string_message);
+ set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE);
+ return TRUE;
+ }
+ }
+ else if (new[0] != 0) local_authenticated_sender = new;
+ }
+
+/* Add the authenticated sender address if present */
+
+if ((smtp_authenticated || ob->authenticated_sender_force) &&
+ local_authenticated_sender != NULL)
+ {
+ string_format(buffer, bufsize, " AUTH=%s",
+ auth_xtextencode(local_authenticated_sender,
+ Ustrlen(local_authenticated_sender)));
+ client_authenticated_sender = string_copy(local_authenticated_sender);
+ }
+else
+ *buffer= 0;
+
+return FALSE;
+}
+
+
+
+#ifdef EXPERIMENTAL_DANE
+/* Lookup TLSA record for host/port.
+Return: OK success with dnssec; DANE mode
+ DEFER Do not use this host now, may retry later
+ FAIL_FORCED No TLSA record; DANE not usable
+ FAIL Do not use this connection
+*/
+
+int
+tlsa_lookup(const host_item * host, dns_answer * dnsa, BOOL dane_required)
+{
+/* move this out to host.c given the similarity to dns_lookup() ? */
+uschar buffer[300];
+const uschar * fullname = buffer;
+
+/* TLSA lookup string */
+(void)sprintf(CS buffer, "_%d._tcp.%.256s", host->port, host->name);
+
+switch (dns_lookup(dnsa, buffer, T_TLSA, &fullname))
+ {
+ case DNS_SUCCEED:
+ if (!dns_is_secure(dnsa))
+ {
+ log_write(0, LOG_MAIN, "DANE error: TLSA lookup not DNSSEC");
+ return DEFER;
+ }
+ return OK;
+
+ case DNS_AGAIN:
+ return DEFER; /* just defer this TLS'd conn */
+
+ case DNS_NODATA: /* no TLSA RR for this lookup */
+ case DNS_NOMATCH: /* no records at all for this lookup */
+ return dane_required ? FAIL : FAIL_FORCED;
+
+ default:
+ case DNS_FAIL:
+ return dane_required ? FAIL : DEFER;
+ }
+}
+#endif
+
+
+
+typedef struct smtp_compare_s
+{
+ uschar *current_sender_address;
+ struct transport_instance *tblock;
+} smtp_compare_t;
+
+/*
+Create a unique string that identifies this message, it is based on
+sender_address, helo_data and tls_certificate if enabled. */
+
+static uschar *
+smtp_local_identity(uschar * sender, struct transport_instance * tblock)
+{
+address_item * addr1;
+uschar * if1 = US"";
+uschar * helo1 = US"";
+#ifdef SUPPORT_TLS
+uschar * tlsc1 = US"";
+#endif
+uschar * save_sender_address = sender_address;
+uschar * local_identity = NULL;
+smtp_transport_options_block * ob =
+ (smtp_transport_options_block *)tblock->options_block;
+
+sender_address = sender;
+
+addr1 = deliver_make_addr (sender, TRUE);
+deliver_set_expansions(addr1);
+
+if (ob->interface)
+ if1 = expand_string(ob->interface);
+
+if (ob->helo_data)
+ helo1 = expand_string(ob->helo_data);
+
+#ifdef SUPPORT_TLS
+if (ob->tls_certificate)
+ tlsc1 = expand_string(ob->tls_certificate);
+local_identity = string_sprintf ("%s^%s^%s", if1, helo1, tlsc1);
+#else
+local_identity = string_sprintf ("%s^%s", if1, helo1);
+#endif
+
+deliver_set_expansions(NULL);
+sender_address = save_sender_address;
+
+return local_identity;
+}
+
+
+
+/* This routine is a callback that is called from transport_check_waiting.
+This function will evaluate the incoming message versus the previous
+message. If the incoming message is using a different local identity then
+we will veto this new message. */
+
+static BOOL
+smtp_are_same_identities(uschar * message_id, smtp_compare_t * s_compare)
+{
+uschar * message_local_identity,
+ * current_local_identity,
+ * new_sender_address;
+
+current_local_identity =
+ smtp_local_identity(s_compare->current_sender_address, s_compare->tblock);
+
+if (!(new_sender_address = deliver_get_sender_address(message_id)))
+ return 0;
+
+message_local_identity =
+ smtp_local_identity(new_sender_address, s_compare->tblock);
+
+return Ustrcmp(current_local_identity, message_local_identity) == 0;
+}
+
+
+
+uschar
+ehlo_response(uschar * buf, size_t bsize, uschar checks)
+{
+#ifdef SUPPORT_TLS
+if ( checks & PEER_OFFERED_TLS
+ && pcre_exec(regex_STARTTLS, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
+ checks &= ~PEER_OFFERED_TLS;
+#endif
+
+if ( checks & PEER_OFFERED_IGNQ
+ && pcre_exec(regex_IGNOREQUOTA, NULL, CS buf, bsize, 0,
+ PCRE_EOPT, NULL, 0) < 0)
+ checks &= ~PEER_OFFERED_IGNQ;
+
+if ( checks & PEER_OFFERED_CHUNKING
+ && pcre_exec(regex_CHUNKING, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
+ checks &= ~PEER_OFFERED_CHUNKING;
+
+#ifndef DISABLE_PRDR
+if ( checks & PEER_OFFERED_PRDR
+ && pcre_exec(regex_PRDR, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
+ checks &= ~PEER_OFFERED_PRDR;
+#endif
+
+#ifdef SUPPORT_I18N
+if ( checks & PEER_OFFERED_UTF8
+ && pcre_exec(regex_UTF8, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
+ checks &= ~PEER_OFFERED_UTF8;
+#endif
+
+if ( checks & PEER_OFFERED_DSN
+ && pcre_exec(regex_DSN, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
+ checks &= ~PEER_OFFERED_DSN;
+
+if ( checks & PEER_OFFERED_PIPE
+ && pcre_exec(regex_PIPELINING, NULL, CS buf, bsize, 0,
+ PCRE_EOPT, NULL, 0) < 0)
+ checks &= ~PEER_OFFERED_PIPE;
+
+if ( checks & PEER_OFFERED_SIZE
+ && pcre_exec(regex_SIZE, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
+ checks &= ~PEER_OFFERED_SIZE;
+
+return checks;
+}
+
+
+
+/* Callback for emitting a BDAT data chunk header.
+
+If given a nonzero size, first flush any buffered SMTP commands
+then emit the command.
+
+Reap previous SMTP command responses if requested.
+Reap one SMTP command response if requested.
+
+Returns: OK or ERROR
+*/
+
+static int
+smtp_chunk_cmd_callback(int fd, transport_ctx * tctx,
+ unsigned chunk_size, unsigned flags)
+{
+smtp_transport_options_block * ob =
+ (smtp_transport_options_block *)(tctx->tblock->options_block);
+int cmd_count = 0;
+int prev_cmd_count;
+uschar * buffer = tctx->buffer;
+
+
+/* Write SMTP chunk header command */
+
+if (chunk_size > 0)
+ if((cmd_count = smtp_write_command(tctx->outblock, FALSE, "BDAT %u%s\r\n",
+ chunk_size,
+ flags & tc_chunk_last ? " LAST" : "")
+ ) < 0) return ERROR;
+
+prev_cmd_count = cmd_count += tctx->cmd_count;
+
+/* Reap responses for any previous, but not one we just emitted */
+
+if (chunk_size > 0)
+ prev_cmd_count--;
+if (tctx->pending_BDAT)
+ prev_cmd_count--;
+
+if (flags & tc_reap_prev && prev_cmd_count > 0)
+ {
+ DEBUG(D_transport) debug_printf("look for %d responses"
+ " for previous pipelined cmds\n", prev_cmd_count);
+
+ switch(sync_responses(tctx->first_addr, tctx->tblock->rcpt_include_affixes,
+ tctx->sync_addr, tctx->host, prev_cmd_count,
+ ob->address_retry_include_sender,
+ tctx->pending_MAIL, 0,
+ tctx->inblock,
+ ob->command_timeout,
+ buffer, DELIVER_BUFFER_SIZE))
+ {
+ case 1: /* 2xx (only) => OK */
+ case 3: tctx->good_RCPT = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 2: *tctx->completed_address = TRUE; /* 5xx (only) => progress made */
+ case 0: break; /* No 2xx or 5xx, but no probs */
+
+ case -1: /* Timeout on RCPT */
+ default: return ERROR; /* I/O error, or any MAIL/DATA error */
+ }
+ cmd_count = 1;
+ if (!tctx->pending_BDAT)
+ pipelining_active = FALSE;
+ }
+
+/* Reap response for an outstanding BDAT */
+
+if (tctx->pending_BDAT)
+ {
+ DEBUG(D_transport) debug_printf("look for one response for BDAT\n");
+
+ if (!smtp_read_response(tctx->inblock, buffer, DELIVER_BUFFER_SIZE, '2',
+ ob->command_timeout))
+ {
+ if (errno == 0 && buffer[0] == '4')
+ {
+ errno = ERRNO_DATA4XX; /*XXX does this actually get used? */
+ tctx->first_addr->more_errno |=
+ ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ }
+ return ERROR;
+ }
+ cmd_count--;
+ tctx->pending_BDAT = FALSE;
+ pipelining_active = FALSE;
+ }
+else if (chunk_size > 0)
+ tctx->pending_BDAT = TRUE;
+
+
+tctx->cmd_count = cmd_count;
+return OK;
+}
+
+
+
/*************************************************
* Deliver address list to given host *
*************************************************/
/* If continue_hostname is not null, we get here only when continuing to
deliver down an existing channel. The channel was passed as the standard
-input.
+input. TLS is never active on a passed channel; the previous process always
+closes it down before passing the connection on.
Otherwise, we have to make a connection to the remote host, and do the
initial protocol exchange.
failed by one of them.
host host to deliver to
host_af AF_INET or AF_INET6
- port TCP/IP port to use, in host byte order
+ port default TCP/IP port to use, in host byte order
interface interface to bind to, or NULL
tblock transport instance block
- copy_host TRUE if host set in addr->host_used must be copied, because
- it is specific to this call of the transport
message_defer set TRUE if yield is OK, but all addresses were deferred
because of a non-recipient, non-host failure, that is, a
4xx response to MAIL FROM, DATA, or ".". This is a defer
static int
smtp_deliver(address_item *addrlist, host_item *host, int host_af, int port,
- uschar *interface, transport_instance *tblock, BOOL copy_host,
+ uschar *interface, transport_instance *tblock,
BOOL *message_defer, BOOL suppress_tls)
{
address_item *addr;
time_t start_delivery_time = time(NULL);
smtp_transport_options_block *ob =
(smtp_transport_options_block *)(tblock->options_block);
-BOOL lmtp = strcmpic(ob->protocol, US"lmtp") == 0;
-BOOL ok = FALSE;
-BOOL send_rset = TRUE;
-BOOL send_quit = TRUE;
-BOOL setting_up = TRUE;
-BOOL completed_address = FALSE;
-BOOL esmtp = TRUE;
-BOOL pending_MAIL;
+struct lflags {
+ BOOL lmtp:1;
+ BOOL smtps:1;
+ BOOL ok:1;
+ BOOL send_rset:1;
+ BOOL send_quit:1;
+ BOOL setting_up:1;
+ BOOL esmtp:1;
+ BOOL esmtp_sent:1;
+ BOOL pending_MAIL:1;
+#ifndef DISABLE_PRDR
+ BOOL prdr_active:1;
+#endif
+#ifdef SUPPORT_I18N
+ BOOL utf8_needed:1;
+#endif
+ BOOL dsn_all_lasthop:1;
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+ BOOL dane:1;
+ BOOL dane_required:1;
+#endif
+} lflags;
+
BOOL pass_message = FALSE;
+BOOL completed_address = FALSE;
+uschar peer_offered = 0;
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+dns_answer tlsa_dnsa;
+#endif
smtp_inblock inblock;
smtp_outblock outblock;
int max_rcpt = tblock->max_addresses;
-uschar *local_authenticated_sender = authenticated_sender;
-uschar *helo_data;
+uschar *igquotstr = US"";
+
+#ifdef EXPERIMENTAL_DSN_INFO
+uschar *smtp_greeting = NULL;
+uschar *helo_response = NULL;
+#endif
+uschar *helo_data = NULL;
+
uschar *message = NULL;
uschar new_message_id[MESSAGE_ID_LENGTH + 1];
uschar *p;
-uschar buffer[4096];
+uschar buffer[DELIVER_BUFFER_SIZE];
uschar inbuffer[4096];
-uschar outbuffer[1024];
+uschar outbuffer[4096];
suppress_tls = suppress_tls; /* stop compiler warning when no TLS support */
+lflags.lmtp = strcmpic(ob->protocol, US"lmtp") == 0;
+lflags.smtps = strcmpic(ob->protocol, US"smtps") == 0;
+lflags.ok = FALSE;
+lflags.send_rset = TRUE;
+lflags.send_quit = TRUE;
+lflags.setting_up = TRUE;
+lflags.esmtp = TRUE;
+lflags.esmtp_sent = FALSE;
+#ifdef SUPPORT_I18N
+lflags.utf8_needed = FALSE;
+#endif
+lflags.dsn_all_lasthop = TRUE;
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+lflags.dane = FALSE;
+lflags.dane_required = verify_check_given_host(&ob->hosts_require_dane, host) == OK;
+#endif
+
*message_defer = FALSE;
smtp_command = US"initial connection";
+buffer[0] = '\0';
if (max_rcpt == 0) max_rcpt = 999999;
/* Set up the buffer for reading SMTP response packets. */
outblock.cmd_count = 0;
outblock.authenticating = FALSE;
-/* Expand the greeting message */
+/* Reset the parameters of a TLS session. */
-helo_data = expand_string(ob->helo_data);
-if (helo_data == NULL)
- {
- uschar *message = string_sprintf("failed to expand helo_data: %s",
- expand_string_message);
- set_errno(addrlist, 0, message, DEFER, FALSE);
- return ERROR;
- }
+tls_out.bits = 0;
+tls_out.cipher = NULL; /* the one we may use for this transport */
+tls_out.ourcert = NULL;
+tls_out.peercert = NULL;
+tls_out.peerdn = NULL;
+#if defined(SUPPORT_TLS) && !defined(USE_GNUTLS)
+tls_out.sni = NULL;
+#endif
+tls_out.ocsp = OCSP_NOT_REQ;
-/* If an authenticated_sender override has been specified for this transport
-instance, expand it. If the expansion is forced to fail, and there was already
-an authenticated_sender for this message, the original value will be used.
-Other expansion failures are serious. An empty result is ignored, but there is
-otherwise no check - this feature is expected to be used with LMTP and other
-cases where non-standard addresses (e.g. without domains) might be required. */
+/* Flip the legacy TLS-related variables over to the outbound set in case
+they're used in the context of the transport. Don't bother resetting
+afterward as we're in a subprocess. */
-if (ob->authenticated_sender != NULL)
+tls_modify_variables(&tls_out);
+
+#ifndef SUPPORT_TLS
+if (lflags.smtps)
{
- uschar *new = expand_string(ob->authenticated_sender);
- if (new == NULL)
- {
- if (!expand_string_forcedfail)
- {
- uschar *message = string_sprintf("failed to expand "
- "authenticated_sender: %s", expand_string_message);
- set_errno(addrlist, 0, message, DEFER, FALSE);
- return ERROR;
- }
- }
- else if (new[0] != 0) local_authenticated_sender = new;
+ set_errno_nohost(addrlist, ERRNO_TLSFAILURE, US"TLS support not available",
+ DEFER, FALSE);
+ return ERROR;
}
+#endif
/* Make a connection to the host if this isn't a continued delivery, and handle
the initial interaction and HELO/EHLO/LHLO. Connect timeout errors are handled
if (continue_hostname == NULL)
{
+ /* This puts port into host->port */
inblock.sock = outblock.sock =
- smtp_connect(host, host_af, port, interface, ob->connect_timeout,
- ob->keepalive);
+ smtp_connect(host, host_af, port, interface, ob->connect_timeout, tblock);
+
if (inblock.sock < 0)
{
- set_errno(addrlist, (errno == ETIMEDOUT)? ERRNO_CONNECTTIMEOUT : errno,
+ set_errno_nohost(addrlist, errno == ETIMEDOUT ? ERRNO_CONNECTTIMEOUT : errno,
NULL, DEFER, FALSE);
return DEFER;
}
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+ {
+ tls_out.dane_verified = FALSE;
+ tls_out.tlsa_usage = 0;
+
+ if (host->dnssec == DS_YES)
+ {
+ if( lflags.dane_required
+ || verify_check_given_host(&ob->hosts_try_dane, host) == OK
+ )
+ switch (rc = tlsa_lookup(host, &tlsa_dnsa, lflags.dane_required))
+ {
+ case OK: lflags.dane = TRUE; break;
+ case FAIL_FORCED: break;
+ default: set_errno_nohost(addrlist, ERRNO_DNSDEFER,
+ string_sprintf("DANE error: tlsa lookup %s",
+ rc == DEFER ? "DEFER" : "FAIL"),
+ rc, FALSE);
+ return rc;
+ }
+ }
+ else if (lflags.dane_required)
+ {
+ set_errno_nohost(addrlist, ERRNO_DNSDEFER,
+ string_sprintf("DANE error: %s lookup not DNSSEC", host->name),
+ FAIL, FALSE);
+ return FAIL;
+ }
+
+ if (lflags.dane)
+ ob->tls_tempfail_tryclear = FALSE;
+ }
+#endif /*DANE*/
+
+ /* Expand the greeting message while waiting for the initial response. (Makes
+ sense if helo_data contains ${lookup dnsdb ...} stuff). The expansion is
+ delayed till here so that $sending_interface and $sending_port are set. */
+
+ helo_data = expand_string(ob->helo_data);
+#ifdef SUPPORT_I18N
+ if (helo_data)
+ {
+ uschar * errstr = NULL;
+ if ((helo_data = string_domain_utf8_to_alabel(helo_data, &errstr)), errstr)
+ {
+ errstr = string_sprintf("failed to expand helo_data: %s", errstr);
+ set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, errstr, DEFER, FALSE);
+ yield = DEFER;
+ goto SEND_QUIT;
+ }
+ }
+#endif
+
/* The first thing is to wait for an initial OK response. The dreaded "goto"
is nevertheless a reasonably clean way of programming this kind of logic,
where you want to escape on any error. */
- if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout)) goto RESPONSE_FAILED;
+ if (!lflags.smtps)
+ {
+ BOOL good_response;
+
+#ifdef TCP_QUICKACK
+ (void) setsockopt(inblock.sock, IPPROTO_TCP, TCP_QUICKACK, US &off, sizeof(off));
+#endif
+ good_response = smtp_read_response(&inblock, buffer, sizeof(buffer),
+ '2', ob->command_timeout);
+#ifdef EXPERIMENTAL_DSN_INFO
+ smtp_greeting = string_copy(buffer);
+#endif
+ if (!good_response) goto RESPONSE_FAILED;
+
+#ifndef DISABLE_EVENT
+ {
+ uschar * s;
+ lookup_dnssec_authenticated = host->dnssec==DS_YES ? US"yes"
+ : host->dnssec==DS_NO ? US"no" : NULL;
+ s = event_raise(tblock->event_action, US"smtp:connect", buffer);
+ if (s)
+ {
+ set_errno_nohost(addrlist, ERRNO_EXPANDFAIL,
+ string_sprintf("deferred by smtp:connect event expansion: %s", s),
+ DEFER, FALSE);
+ yield = DEFER;
+ goto SEND_QUIT;
+ }
+ }
+#endif
+
+ /* Now check if the helo_data expansion went well, and sign off cleanly if
+ it didn't. */
+
+ if (!helo_data)
+ {
+ uschar *message = string_sprintf("failed to expand helo_data: %s",
+ expand_string_message);
+ set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE);
+ yield = DEFER;
+ goto SEND_QUIT;
+ }
+ }
/** Debugging without sending a message
addrlist->transport_return = DEFER;
mailers use upper case for some reason (the RFC is quite clear about case
independence) so, for peace of mind, I gave in. */
- esmtp = verify_check_this_host(&(ob->hosts_avoid_esmtp), NULL,
- host->name, host->address, NULL) != OK;
+ lflags.esmtp = verify_check_given_host(&ob->hosts_avoid_esmtp, host) != OK;
- if (esmtp)
+ /* Alas; be careful, since this goto is not an error-out, so conceivably
+ we might set data between here and the target which we assume to exist
+ and be usable. I can see this coming back to bite us. */
+#ifdef SUPPORT_TLS
+ if (lflags.smtps)
+ {
+ smtp_peer_options |= PEER_OFFERED_TLS;
+ suppress_tls = FALSE;
+ ob->tls_tempfail_tryclear = FALSE;
+ smtp_command = US"SSL-on-connect";
+ goto TLS_NEGOTIATE;
+ }
+#endif
+
+ if (lflags.esmtp)
{
if (smtp_write_command(&outblock, FALSE, "%s %s\r\n",
- lmtp? "LHLO" : "EHLO", helo_data) < 0)
+ lflags.lmtp ? "LHLO" : "EHLO", helo_data) < 0)
goto SEND_FAILED;
+ lflags.esmtp_sent = TRUE;
if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
ob->command_timeout))
{
- if (errno != 0 || buffer[0] == 0 || lmtp) goto RESPONSE_FAILED;
- esmtp = FALSE;
+ if (errno != 0 || buffer[0] == 0 || lflags.lmtp)
+ {
+#ifdef EXPERIMENTAL_DSN_INFO
+ helo_response = string_copy(buffer);
+#endif
+ goto RESPONSE_FAILED;
+ }
+ lflags.esmtp = FALSE;
}
+#ifdef EXPERIMENTAL_DSN_INFO
+ helo_response = string_copy(buffer);
+#endif
}
else
- {
DEBUG(D_transport)
debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n");
- }
- if (!esmtp)
+ if (!lflags.esmtp)
{
+ BOOL good_response;
+ int n = sizeof(buffer);
+ uschar * rsp = buffer;
+
+ if (lflags.esmtp_sent && (n = Ustrlen(buffer)) < sizeof(buffer)/2)
+ { rsp = buffer + n + 1; n = sizeof(buffer) - n; }
+
if (smtp_write_command(&outblock, FALSE, "HELO %s\r\n", helo_data) < 0)
goto SEND_FAILED;
- if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout)) goto RESPONSE_FAILED;
+ good_response = smtp_read_response(&inblock, rsp, n,
+ '2', ob->command_timeout);
+#ifdef EXPERIMENTAL_DSN_INFO
+ helo_response = string_copy(rsp);
+#endif
+ if (!good_response)
+ {
+ /* Handle special logging for a closed connection after HELO
+ when had previously sent EHLO */
+
+ if (rsp != buffer && rsp[0] == 0 && (errno == 0 || errno == ECONNRESET))
+ {
+ message = NULL;
+ lflags.send_quit = FALSE;
+ save_errno = ERRNO_SMTPCLOSED;
+ message = string_sprintf("Remote host closed connection "
+ "in response to %s (EHLO response was: %s)",
+ smtp_command, buffer);
+ goto FAILED;
+ }
+ Ustrncpy(buffer, rsp, sizeof(buffer)/2);
+ goto RESPONSE_FAILED;
+ }
}
+ peer_offered = smtp_peer_options = 0;
+
+ if (lflags.esmtp || lflags.lmtp)
+ {
+ peer_offered = ehlo_response(buffer, Ustrlen(buffer),
+ PEER_OFFERED_TLS /* others checked later */
+ );
+
/* Set tls_offered if the response to EHLO specifies support for STARTTLS. */
- #ifdef SUPPORT_TLS
- tls_offered = esmtp &&
- pcre_exec(regex_STARTTLS, NULL, CS buffer, Ustrlen(buffer), 0,
- PCRE_EOPT, NULL, 0) >= 0;
- #endif
+#ifdef SUPPORT_TLS
+ smtp_peer_options |= peer_offered & PEER_OFFERED_TLS;
+#endif
+ }
}
/* For continuing deliveries down the same channel, the socket is the standard
input, and we don't need to redo EHLO here (but may need to do so for TLS - see
below). Set up the pointer to where subsequent commands will be left, for
-error messages. Note that smtp_use_size and smtp_use_pipelining will have been
+error messages. Note that smtp_peer_options will have been
set from the command line if they were set in the process that passed the
connection on. */
+/*XXX continue case needs to propagate DSN_INFO, prob. in deliver.c
+as the contine goes via transport_pass_socket() and doublefork and exec.
+It does not wait. Unclear how we keep separate host's responses
+separate - we could match up by host ip+port as a bodge. */
+
else
{
inblock.sock = outblock.sock = fileno(stdin);
smtp_command = big_buffer;
+ host->port = port; /* Record the port that was used */
}
/* If TLS is available on this connection, whether continued or not, attempt to
for error analysis. */
#ifdef SUPPORT_TLS
-if (tls_offered && !suppress_tls &&
- verify_check_this_host(&(ob->hosts_avoid_tls), NULL, host->name,
- host->address, NULL) != OK)
+if ( smtp_peer_options & PEER_OFFERED_TLS
+ && !suppress_tls
+ && verify_check_given_host(&ob->hosts_avoid_tls, host) != OK)
{
uschar buffer2[4096];
if (smtp_write_command(&outblock, FALSE, "STARTTLS\r\n") < 0)
if (!smtp_read_response(&inblock, buffer2, sizeof(buffer2), '2',
ob->command_timeout))
{
- Ustrncpy(buffer, buffer2, sizeof(buffer));
- if (errno != 0 || buffer2[0] == 0 ||
- (buffer2[0] == '4' && !ob->tls_tempfail_tryclear))
+ if ( errno != 0
+ || buffer2[0] == 0
+ || (buffer2[0] == '4' && !ob->tls_tempfail_tryclear)
+ )
+ {
+ Ustrncpy(buffer, buffer2, sizeof(buffer));
goto RESPONSE_FAILED;
+ }
}
/* STARTTLS accepted: try to negotiate a TLS session. */
else
+ TLS_NEGOTIATE:
{
- int rc = tls_client_start(inblock.sock, host, addrlist,
- NULL, /* No DH param */
- ob->tls_certificate,
- ob->tls_privatekey,
- ob->tls_verify_certificates,
- ob->tls_crl,
- ob->tls_require_ciphers,
- ob->command_timeout);
+ int rc = tls_client_start(inblock.sock, host, addrlist, tblock
+# ifdef EXPERIMENTAL_DANE
+ , lflags.dane ? &tlsa_dnsa : NULL
+# endif
+ );
/* TLS negotiation failed; give an error. From outside, this function may
be called again to try in clear on a new connection, if the options permit
if (rc != OK)
{
+# ifdef EXPERIMENTAL_DANE
+ if (lflags.dane) log_write(0, LOG_MAIN,
+ "DANE attempt failed; no TLS connection to %s [%s]",
+ host->name, host->address);
+# endif
+
save_errno = ERRNO_TLSFAILURE;
message = US"failure while setting up TLS session";
- send_quit = FALSE;
+ lflags.send_quit = FALSE;
goto TLS_FAILED;
}
/* TLS session is set up */
- for (addr = addrlist; addr != NULL; addr = addr->next)
- {
+ smtp_peer_options_wrap = smtp_peer_options;
+ for (addr = addrlist; addr; addr = addr->next)
if (addr->transport_return == PENDING_DEFER)
{
- addr->cipher = tls_cipher;
- addr->peerdn = tls_peerdn;
+ addr->cipher = tls_out.cipher;
+ addr->ourcert = tls_out.ourcert;
+ addr->peercert = tls_out.peercert;
+ addr->peerdn = tls_out.peerdn;
+ addr->ocsp = tls_out.ocsp;
}
- }
}
}
-/* If we started TLS, redo the EHLO/LHLO exchange over the secure channel. */
+/* if smtps, we'll have smtp_command set to something else; always safe to
+reset it here. */
+smtp_command = big_buffer;
+
+/* If we started TLS, redo the EHLO/LHLO exchange over the secure channel. If
+helo_data is null, we are dealing with a connection that was passed from
+another process, and so we won't have expanded helo_data above. We have to
+expand it here. $sending_ip_address and $sending_port are set up right at the
+start of the Exim process (in exim.c). */
-if (tls_active >= 0)
+if (tls_out.active >= 0)
{
- if (smtp_write_command(&outblock, FALSE, "%s %s\r\n", lmtp? "LHLO" : "EHLO",
- helo_data) < 0)
+ char *greeting_cmd;
+ BOOL good_response;
+
+ if (helo_data == NULL)
+ {
+ helo_data = expand_string(ob->helo_data);
+ if (helo_data == NULL)
+ {
+ uschar *message = string_sprintf("failed to expand helo_data: %s",
+ expand_string_message);
+ set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE);
+ yield = DEFER;
+ goto SEND_QUIT;
+ }
+ }
+
+ /* For SMTPS we need to wait for the initial OK response. */
+ if (lflags.smtps)
+ {
+ good_response = smtp_read_response(&inblock, buffer, sizeof(buffer),
+ '2', ob->command_timeout);
+#ifdef EXPERIMENTAL_DSN_INFO
+ smtp_greeting = string_copy(buffer);
+#endif
+ if (!good_response) goto RESPONSE_FAILED;
+ }
+
+ if (lflags.esmtp)
+ greeting_cmd = "EHLO";
+ else
+ {
+ greeting_cmd = "HELO";
+ DEBUG(D_transport)
+ debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n");
+ }
+
+ if (smtp_write_command(&outblock, FALSE, "%s %s\r\n",
+ lflags.lmtp ? "LHLO" : greeting_cmd, helo_data) < 0)
goto SEND_FAILED;
- if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout))
- goto RESPONSE_FAILED;
+ good_response = smtp_read_response(&inblock, buffer, sizeof(buffer),
+ '2', ob->command_timeout);
+#ifdef EXPERIMENTAL_DSN_INFO
+ helo_response = string_copy(buffer);
+#endif
+ if (!good_response) goto RESPONSE_FAILED;
+ smtp_peer_options = 0;
}
/* If the host is required to use a secure channel, ensure that we
have one. */
-else if (verify_check_this_host(&(ob->hosts_require_tls), NULL, host->name,
- host->address, NULL) == OK)
+else if ( lflags.smtps
+# ifdef EXPERIMENTAL_DANE
+ || lflags.dane
+# endif
+ || verify_check_given_host(&ob->hosts_require_tls, host) == OK
+ )
{
save_errno = ERRNO_TLSREQUIRED;
- message = string_sprintf("a TLS session is required for %s [%s], but %s",
- host->name, host->address,
- tls_offered? "an attempt to start TLS failed" :
- "the server did not offer TLS support");
+ message = string_sprintf("a TLS session is required, but %s",
+ smtp_peer_options & PEER_OFFERED_TLS
+ ? "an attempt to start TLS failed" : "the server did not offer TLS support");
goto TLS_FAILED;
}
-#endif
+#endif /*SUPPORT_TLS*/
/* If TLS is active, we have just started it up and re-done the EHLO command,
so its response needs to be analyzed. If TLS is not active and this is a
we skip this. */
if (continue_hostname == NULL
- #ifdef SUPPORT_TLS
- || tls_active >= 0
- #endif
+#ifdef SUPPORT_TLS
+ || tls_out.active >= 0
+#endif
)
{
- int require_auth;
- uschar *fail_reason = US"server did not advertise AUTH support";
-
- /* If the response to EHLO specified support for the SIZE parameter, note
- this, provided size_addition is non-negative. */
-
- smtp_use_size = esmtp && ob->size_addition >= 0 &&
- pcre_exec(regex_SIZE, NULL, CS buffer, Ustrlen(CS buffer), 0,
- PCRE_EOPT, NULL, 0) >= 0;
-
- /* Note whether the server supports PIPELINING. If hosts_avoid_esmtp matched
- the current host, esmtp will be false, so PIPELINING can never be used. */
-
- smtp_use_pipelining = esmtp &&
- pcre_exec(regex_PIPELINING, NULL, CS buffer, Ustrlen(CS buffer), 0,
- PCRE_EOPT, NULL, 0) >= 0;
-
- DEBUG(D_transport) debug_printf("%susing PIPELINING\n",
- smtp_use_pipelining? "" : "not ");
-
- /* Note if the response to EHLO specifies support for the AUTH extension.
- If it has, check that this host is one we want to authenticate to, and do
- the business. The host name and address must be available when the
- authenticator's client driver is running. */
-
- smtp_authenticated = FALSE;
- require_auth = verify_check_this_host(&(ob->hosts_require_auth), NULL,
- host->name, host->address, NULL);
-
- if (esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1))
+ if (lflags.esmtp || lflags.lmtp)
{
- uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]);
- expand_nmax = -1; /* reset */
-
- /* Must not do this check until after we have saved the result of the
- regex match above. */
-
- if (require_auth == OK ||
- verify_check_this_host(&(ob->hosts_try_auth), NULL, host->name,
- host->address, NULL) == OK)
- {
- auth_instance *au;
- fail_reason = US"no common mechanisms were found";
-
- DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n");
-
- /* Scan the configured authenticators looking for one which is configured
- for use as a client and whose name matches an authentication mechanism
- supported by the server. If one is found, attempt to authenticate by
- calling its client function. */
-
- for (au = auths; !smtp_authenticated && au != NULL; au = au->next)
- {
- uschar *p = names;
- if (!au->client) continue;
-
- /* Loop to scan supported server mechanisms */
+ peer_offered = ehlo_response(buffer, Ustrlen(buffer),
+ 0 /* no TLS */
+ | (lflags.lmtp && ob->lmtp_ignore_quota ? PEER_OFFERED_IGNQ : 0)
+ | PEER_OFFERED_CHUNKING
+ | PEER_OFFERED_PRDR
+#ifdef SUPPORT_I18N
+ | (addrlist->prop.utf8_msg ? PEER_OFFERED_UTF8 : 0)
+ /*XXX if we hand peercaps on to continued-conn processes,
+ must not depend on this addr */
+#endif
+ | PEER_OFFERED_DSN
+ | PEER_OFFERED_PIPE
+ | (ob->size_addition >= 0 ? PEER_OFFERED_SIZE : 0)
+ );
- while (*p != 0)
- {
- int rc;
- int len = Ustrlen(au->public_name);
- while (isspace(*p)) p++;
+ /* Set for IGNOREQUOTA if the response to LHLO specifies support and the
+ lmtp_ignore_quota option was set. */
- if (strncmpic(au->public_name, p, len) != 0 ||
- (p[len] != 0 && !isspace(p[len])))
- {
- while (*p != 0 && !isspace(*p)) p++;
- continue;
- }
+ igquotstr = peer_offered & PEER_OFFERED_IGNQ ? US" IGNOREQUOTA" : US"";
- /* Found data for a listed mechanism. Call its client entry. Set
- a flag in the outblock so that data is overwritten after sending so
- that reflections don't show it. */
+ /* If the response to EHLO specified support for the SIZE parameter, note
+ this, provided size_addition is non-negative. */
- fail_reason = US"authentication attempt(s) failed";
- outblock.authenticating = TRUE;
- rc = (au->info->clientcode)(au, &inblock, &outblock,
- ob->command_timeout, buffer, sizeof(buffer));
- outblock.authenticating = FALSE;
- DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n",
- au->name, rc);
+ smtp_peer_options |= peer_offered & PEER_OFFERED_SIZE;
- /* A temporary authentication failure must hold up delivery to
- this host. After a permanent authentication failure, we carry on
- to try other authentication methods. If all fail hard, try to
- deliver the message unauthenticated unless require_auth was set. */
+ /* Note whether the server supports PIPELINING. If hosts_avoid_esmtp matched
+ the current host, esmtp will be false, so PIPELINING can never be used. If
+ the current host matches hosts_avoid_pipelining, don't do it. */
- switch(rc)
- {
- case OK:
- smtp_authenticated = TRUE; /* stops the outer loop */
- break;
+ if ( peer_offered & PEER_OFFERED_PIPE
+ && verify_check_given_host(&ob->hosts_avoid_pipelining, host) != OK)
+ smtp_peer_options |= PEER_OFFERED_PIPE;
- /* Failure after writing a command */
+ DEBUG(D_transport) debug_printf("%susing PIPELINING\n",
+ smtp_peer_options & PEER_OFFERED_PIPE ? "" : "not ");
- case FAIL_SEND:
- goto SEND_FAILED;
+ if ( peer_offered & PEER_OFFERED_CHUNKING
+ && verify_check_given_host(&ob->hosts_try_chunking, host) != OK)
+ peer_offered &= ~PEER_OFFERED_CHUNKING;
- /* Failure after reading a response */
+ if (peer_offered & PEER_OFFERED_CHUNKING)
+ {DEBUG(D_transport) debug_printf("CHUNKING usable\n");}
- case FAIL:
- if (errno != 0 || buffer[0] != '5') goto RESPONSE_FAILED;
- log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s",
- au->name, host->name, host->address, buffer);
- break;
+#ifndef DISABLE_PRDR
+ if ( peer_offered & PEER_OFFERED_PRDR
+ && verify_check_given_host(&ob->hosts_try_prdr, host) != OK)
+ peer_offered &= ~PEER_OFFERED_PRDR;
- /* Failure by some other means. In effect, the authenticator
- decided it wasn't prepared to handle this case. Typically this
- is the result of "fail" in an expansion string. Do we need to
- log anything here? */
-
- case CANCELLED:
- break;
+ if (peer_offered & PEER_OFFERED_PRDR)
+ {DEBUG(D_transport) debug_printf("PRDR usable\n");}
+#endif
- /* Internal problem, message in buffer. */
+ /* Note if the server supports DSN */
+ smtp_peer_options |= peer_offered & PEER_OFFERED_DSN;
+ DEBUG(D_transport) debug_printf("%susing DSN\n",
+ peer_offered & PEER_OFFERED_DSN ? "" : "not ");
- case ERROR:
- yield = ERROR;
- set_errno(addrlist, 0, string_copy(buffer), DEFER, FALSE);
- goto SEND_QUIT;
- }
+ /* Note if the response to EHLO specifies support for the AUTH extension.
+ If it has, check that this host is one we want to authenticate to, and do
+ the business. The host name and address must be available when the
+ authenticator's client driver is running. */
- break; /* If not authenticated, try next authenticator */
- } /* Loop for scanning supported server mechanisms */
- } /* Loop for further authenticators */
+ switch (yield = smtp_auth(buffer, sizeof(buffer), addrlist, host,
+ ob, lflags.esmtp, &inblock, &outblock))
+ {
+ default: goto SEND_QUIT;
+ case OK: break;
+ case FAIL_SEND: goto SEND_FAILED;
+ case FAIL: goto RESPONSE_FAILED;
}
}
-
- /* If we haven't authenticated, but are required to, give up. */
-
- if (require_auth == OK && !smtp_authenticated)
- {
- yield = DEFER;
- set_errno(addrlist, ERRNO_AUTHFAIL,
- string_sprintf("authentication required but %s", fail_reason), DEFER,
- FALSE);
- goto SEND_QUIT;
- }
}
+pipelining_active = !!(smtp_peer_options & PEER_OFFERED_PIPE);
/* The setting up of the SMTP call is now complete. Any subsequent errors are
message-specific. */
-setting_up = FALSE;
+lflags.setting_up = FALSE;
+
+#ifdef SUPPORT_I18N
+if (addrlist->prop.utf8_msg)
+ {
+ lflags.utf8_needed = !addrlist->prop.utf8_downcvt
+ && !addrlist->prop.utf8_downcvt_maybe;
+ DEBUG(D_transport) if (!lflags.utf8_needed)
+ debug_printf("utf8: %s downconvert\n",
+ addrlist->prop.utf8_downcvt ? "mandatory" : "optional");
+ }
+
+/* If this is an international message we need the host to speak SMTPUTF8 */
+if (lflags.utf8_needed && !(peer_offered & PEER_OFFERED_UTF8))
+ {
+ errno = ERRNO_UTF8_FWD;
+ goto RESPONSE_FAILED;
+ }
+#endif
/* If there is a filter command specified for this transport, we can now
set it up. This cannot be done until the identify of the host is known. */
if (tblock->filter_command != NULL)
{
BOOL rc;
- uschar buffer[64];
- sprintf(CS buffer, "%.50s transport", tblock->name);
+ uschar fbuf[64];
+ sprintf(CS fbuf, "%.50s transport", tblock->name);
rc = transport_set_up_command(&transport_filter_argv, tblock->filter_command,
- TRUE, DEFER, addrlist, buffer, NULL);
+ TRUE, DEFER, addrlist, fbuf, NULL);
+ transport_filter_timeout = tblock->filter_timeout;
/* On failure, copy the error to all addresses, abandon the SMTP call, and
yield ERROR. */
if (!rc)
{
- set_errno(addrlist->next, addrlist->basic_errno, addrlist->message, DEFER,
+ set_errno_nohost(addrlist->next, addrlist->basic_errno, addrlist->message, DEFER,
FALSE);
yield = ERROR;
goto SEND_QUIT;
}
+
+ if ( transport_filter_argv
+ && *transport_filter_argv
+ && **transport_filter_argv
+ && peer_offered & PEER_OFFERED_CHUNKING
+ )
+ {
+ peer_offered &= ~PEER_OFFERED_CHUNKING;
+ DEBUG(D_transport) debug_printf("CHUNKING not usable due to transport filter\n");
+ }
}
SEND_MESSAGE:
sync_addr = first_addr;
address_count = 0;
-ok = FALSE;
-send_rset = TRUE;
+lflags.ok = FALSE;
+lflags.send_rset = TRUE;
completed_address = FALSE;
p = buffer;
*p = 0;
-if (smtp_use_size)
+if (peer_offered & PEER_OFFERED_SIZE)
{
sprintf(CS p, " SIZE=%d", message_size+message_linecount+ob->size_addition);
while (*p) p++;
}
-/* Add the authenticated sender address if present */
+#ifndef DISABLE_PRDR
+lflags.prdr_active = FALSE;
+if (peer_offered & PEER_OFFERED_PRDR)
+ for (addr = first_addr; addr; addr = addr->next)
+ if (addr->transport_return == PENDING_DEFER)
+ {
+ for (addr = addr->next; addr; addr = addr->next)
+ if (addr->transport_return == PENDING_DEFER)
+ { /* at least two recipients to send */
+ lflags.prdr_active = TRUE;
+ sprintf(CS p, " PRDR"); p += 5;
+ break;
+ }
+ break;
+ }
+#endif
+
+#ifdef SUPPORT_I18N
+if ( addrlist->prop.utf8_msg
+ && !addrlist->prop.utf8_downcvt
+ && peer_offered & PEER_OFFERED_UTF8
+ )
+ sprintf(CS p, " SMTPUTF8"), p += 9;
+#endif
+
+/* check if all addresses have lasthop flag */
+/* do not send RET and ENVID if true */
+for (lflags.dsn_all_lasthop = TRUE, addr = first_addr;
+ address_count < max_rcpt && addr != NULL;
+ addr = addr->next)
+ if ((addr->dsn_flags & rf_dsnlasthop) != 1)
+ {
+ lflags.dsn_all_lasthop = FALSE;
+ break;
+ }
+
+/* Add any DSN flags to the mail command */
-if (smtp_authenticated && local_authenticated_sender != NULL)
+if (peer_offered & PEER_OFFERED_DSN && !lflags.dsn_all_lasthop)
{
- string_format(p, sizeof(buffer) - (p-buffer), " AUTH=%s",
- auth_xtextencode(local_authenticated_sender,
- Ustrlen(local_authenticated_sender)));
+ if (dsn_ret == dsn_ret_hdrs)
+ { Ustrcpy(p, " RET=HDRS"); p += 9; }
+ else if (dsn_ret == dsn_ret_full)
+ { Ustrcpy(p, " RET=FULL"); p += 9; }
+
+ if (dsn_envid)
+ {
+ string_format(p, sizeof(buffer) - (p-buffer), " ENVID=%s", dsn_envid);
+ while (*p) p++;
+ }
+ }
+
+/* If an authenticated_sender override has been specified for this transport
+instance, expand it. If the expansion is forced to fail, and there was already
+an authenticated_sender for this message, the original value will be used.
+Other expansion failures are serious. An empty result is ignored, but there is
+otherwise no check - this feature is expected to be used with LMTP and other
+cases where non-standard addresses (e.g. without domains) might be required. */
+
+if (smtp_mail_auth_str(p, sizeof(buffer) - (p-buffer), addrlist, ob))
+ {
+ yield = ERROR;
+ goto SEND_QUIT;
}
/* From here until we send the DATA command, we can make use of PIPELINING
When PIPELINING is off, each command written reports that it has flushed the
buffer. */
-pending_MAIL = TRUE; /* The block starts with MAIL */
+lflags.pending_MAIL = TRUE; /* The block starts with MAIL */
+
+ {
+ uschar * s = return_path;
+#ifdef SUPPORT_I18N
+ uschar * errstr = NULL;
+
+ /* If we must downconvert, do the from-address here. Remember we had to
+ for the to-addresses (done below), and also (ugly) for re-doing when building
+ the delivery log line. */
+
+ if ( addrlist->prop.utf8_msg
+ && (addrlist->prop.utf8_downcvt || !(peer_offered & PEER_OFFERED_UTF8))
+ )
+ {
+ if (s = string_address_utf8_to_alabel(return_path, &errstr), errstr)
+ {
+ set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, errstr, DEFER, FALSE);
+ yield = ERROR;
+ goto SEND_QUIT;
+ }
+ setflag(addrlist, af_utf8_downcvt);
+ }
+#endif
+
+ rc = smtp_write_command(&outblock, pipelining_active,
+ "MAIL FROM:<%s>%s\r\n", s, buffer);
+ }
-rc = smtp_write_command(&outblock, smtp_use_pipelining,
- "MAIL FROM:<%s>%s\r\n", return_path, buffer);
mail_command = string_copy(big_buffer); /* Save for later error message */
switch(rc)
{
case -1: /* Transmission error */
- goto SEND_FAILED;
+ goto SEND_FAILED;
case +1: /* Block was sent */
- if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout)) goto RESPONSE_FAILED;
- pending_MAIL = FALSE;
- break;
+ if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
+ ob->command_timeout))
+ {
+ if (errno == 0 && buffer[0] == '4')
+ {
+ errno = ERRNO_MAIL4XX;
+ addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ }
+ goto RESPONSE_FAILED;
+ }
+ lflags.pending_MAIL = FALSE;
+ break;
}
/* Pass over all the relevant recipient addresses for this host, which are the
that max_rcpt will be large, so all addresses will be done at once. */
for (addr = first_addr;
- address_count < max_rcpt && addr != NULL;
+ addr && address_count < max_rcpt;
addr = addr->next)
+ if (addr->transport_return == PENDING_DEFER)
{
int count;
BOOL no_flush;
+ uschar * rcpt_addr;
- if (addr->transport_return != PENDING_DEFER) continue;
+ addr->dsn_aware = peer_offered & PEER_OFFERED_DSN
+ ? dsn_support_yes : dsn_support_no;
address_count++;
- no_flush = smtp_use_pipelining && (!mua_wrapper || addr->next != NULL);
+ no_flush = pipelining_active && (!mua_wrapper || addr->next);
+
+ /* Add any DSN flags to the rcpt command and add to the sent string */
+
+ p = buffer;
+ *p = 0;
+
+ if (peer_offered & PEER_OFFERED_DSN && !(addr->dsn_flags & rf_dsnlasthop))
+ {
+ if (addr->dsn_flags & rf_dsnflags)
+ {
+ int i;
+ BOOL first = TRUE;
+ Ustrcpy(p, " NOTIFY=");
+ while (*p) p++;
+ for (i = 0; i < 4; i++)
+ if ((addr->dsn_flags & rf_list[i]) != 0)
+ {
+ if (!first) *p++ = ',';
+ first = FALSE;
+ Ustrcpy(p, rf_names[i]);
+ while (*p) p++;
+ }
+ }
+
+ if (addr->dsn_orcpt)
+ {
+ string_format(p, sizeof(buffer) - (p-buffer), " ORCPT=%s",
+ addr->dsn_orcpt);
+ while (*p) p++;
+ }
+ }
/* Now send the RCPT command, and process outstanding responses when
necessary. After a timeout on RCPT, we just end the function, leaving the
yield as OK, because this error can often mean that there is a problem with
just one address, so we don't want to delay the host. */
- count = smtp_write_command(&outblock, no_flush, "RCPT TO:<%s>\r\n",
- transport_rcpt_address(addr, tblock->rcpt_include_affixes));
+ rcpt_addr = transport_rcpt_address(addr, tblock->rcpt_include_affixes);
+
+#ifdef SUPPORT_I18N
+ {
+ uschar * dummy_errstr;
+ if ( testflag(addrlist, af_utf8_downcvt)
+ && (rcpt_addr = string_address_utf8_to_alabel(rcpt_addr, &dummy_errstr),
+ dummy_errstr
+ ) )
+ {
+ errno = ERRNO_EXPANDFAIL;
+ goto SEND_FAILED;
+ }
+ }
+#endif
+
+ count = smtp_write_command(&outblock, no_flush, "RCPT TO:<%s>%s%s\r\n",
+ rcpt_addr, igquotstr, buffer);
+
if (count < 0) goto SEND_FAILED;
if (count > 0)
{
switch(sync_responses(first_addr, tblock->rcpt_include_affixes,
- &sync_addr, host, count, pending_MAIL, 0, &inblock,
- ob->command_timeout, buffer, sizeof(buffer)))
+ &sync_addr, host, count, ob->address_retry_include_sender,
+ lflags.pending_MAIL, 0, &inblock, ob->command_timeout, buffer,
+ sizeof(buffer)))
{
- case 3: ok = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 3: lflags.ok = TRUE; /* 2xx & 5xx => OK & progress made */
case 2: completed_address = TRUE; /* 5xx (only) => progress made */
break;
- case 1: ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
- if (!lmtp) completed_address = TRUE; /* can't tell about progress yet */
+ case 1: lflags.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
+ if (!lflags.lmtp) completed_address = TRUE; /* can't tell about progress yet */
case 0: /* No 2xx or 5xx, but no probs */
break;
case -1: goto END_OFF; /* Timeout on RCPT */
default: goto RESPONSE_FAILED; /* I/O error, or any MAIL error */
}
- pending_MAIL = FALSE; /* Dealt with MAIL */
+ lflags.pending_MAIL = FALSE; /* Dealt with MAIL */
}
} /* Loop for next address */
if (mua_wrapper)
{
address_item *badaddr;
- for (badaddr = first_addr; badaddr != NULL; badaddr = badaddr->next)
- {
- if (badaddr->transport_return != PENDING_OK) break;
- }
- if (badaddr != NULL)
- {
- set_errno(addrlist, 0, badaddr->message, FAIL,
- testflag(badaddr, af_pass_message));
- ok = FALSE;
- }
+ for (badaddr = first_addr; badaddr; badaddr = badaddr->next)
+ if (badaddr->transport_return != PENDING_OK)
+ {
+ /*XXX could we find a better errno than 0 here? */
+ set_errno_nohost(addrlist, 0, badaddr->message, FAIL,
+ testflag(badaddr, af_pass_message));
+ lflags.ok = FALSE;
+ break;
+ }
}
/* If ok is TRUE, we know we have got at least one good recipient, and must now
send DATA, but if it is FALSE (in the normal, non-wrapper case), we may still
have a good recipient buffered up if we are pipelining. We don't want to waste
time sending DATA needlessly, so we only send it if either ok is TRUE or if we
-are pipelining. The responses are all handled by sync_responses(). */
+are pipelining. The responses are all handled by sync_responses().
+If using CHUNKING, do not send a BDAT until we know how big a chunk we want
+to send is. */
-if (ok || (smtp_use_pipelining && !mua_wrapper))
+if ( !(peer_offered & PEER_OFFERED_CHUNKING)
+ && (lflags.ok || (pipelining_active && !mua_wrapper)))
{
int count = smtp_write_command(&outblock, FALSE, "DATA\r\n");
+
if (count < 0) goto SEND_FAILED;
switch(sync_responses(first_addr, tblock->rcpt_include_affixes, &sync_addr,
- host, count, pending_MAIL, ok? +1 : -1, &inblock,
- ob->command_timeout, buffer, sizeof(buffer)))
+ host, count, ob->address_retry_include_sender, lflags.pending_MAIL,
+ lflags.ok ? +1 : -1, &inblock, ob->command_timeout, buffer, sizeof(buffer)))
{
- case 3: ok = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 3: lflags.ok = TRUE; /* 2xx & 5xx => OK & progress made */
case 2: completed_address = TRUE; /* 5xx (only) => progress made */
break;
- case 1: ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
- if (!lmtp) completed_address = TRUE; /* can't tell about progress yet */
+ case 1: lflags.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
+ if (!lflags.lmtp) completed_address = TRUE; /* can't tell about progress yet */
case 0: break; /* No 2xx or 5xx, but no probs */
case -1: goto END_OFF; /* Timeout on RCPT */
default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */
}
+ pipelining_active = FALSE;
}
-/* Save the first address of the next batch. */
-
-first_addr = addr;
-
/* If there were no good recipients (but otherwise there have been no
problems), just set ok TRUE, since we have handled address-specific errors
already. Otherwise, it's OK to send the message. Use the check/escape mechanism
well as body. Set the appropriate timeout value to be used for each chunk.
(Haven't been able to make it work using select() for writing yet.) */
-if (!ok) ok = TRUE; else
+if (!(peer_offered & PEER_OFFERED_CHUNKING) && !lflags.ok)
+ {
+ /* Save the first address of the next batch. */
+ first_addr = addr;
+
+ lflags.ok = TRUE;
+ }
+else
{
+ transport_ctx tctx = {
+ tblock,
+ addrlist,
+ US".", US"..", /* Escaping strings */
+ topt_use_crlf | topt_escape_headers
+ | (tblock->body_only ? topt_no_headers : 0)
+ | (tblock->headers_only ? topt_no_body : 0)
+ | (tblock->return_path_add ? topt_add_return_path : 0)
+ | (tblock->delivery_date_add ? topt_add_delivery_date : 0)
+ | (tblock->envelope_to_add ? topt_add_envelope_to : 0)
+ };
+
+ /* If using CHUNKING we need a callback from the generic transport
+ support to us, for the sending of BDAT smtp commands and the reaping
+ of responses. The callback needs a whole bunch of state so set up
+ a transport-context structure to be passed around. */
+
+ if (peer_offered & PEER_OFFERED_CHUNKING)
+ {
+ tctx.check_string = tctx.escape_string = NULL;
+ tctx.options |= topt_use_bdat;
+ tctx.chunk_cb = smtp_chunk_cmd_callback;
+ tctx.inblock = &inblock;
+ tctx.outblock = &outblock;
+ tctx.host = host;
+ tctx.first_addr = first_addr;
+ tctx.sync_addr = &sync_addr;
+ tctx.pending_MAIL = lflags.pending_MAIL;
+ tctx.pending_BDAT = FALSE;
+ tctx.good_RCPT = lflags.ok;
+ tctx.completed_address = &completed_address;
+ tctx.cmd_count = 0;
+ tctx.buffer = buffer;
+ }
+ else
+ tctx.options |= topt_end_dot;
+
+ /* Save the first address of the next batch. */
+ first_addr = addr;
+
+ /* Responses from CHUNKING commands go in buffer. Otherwise,
+ there has not been a response. */
+
+ buffer[0] = 0;
+
sigalrm_seen = FALSE;
transport_write_timeout = ob->data_timeout;
smtp_command = US"sending data block"; /* For error messages */
DEBUG(D_transport|D_v)
- debug_printf(" SMTP>> writing message and terminating \".\"\n");
+ if (peer_offered & PEER_OFFERED_CHUNKING)
+ debug_printf(" will write message using CHUNKING\n");
+ else
+ debug_printf(" SMTP>> writing message and terminating \".\"\n");
transport_count = 0;
-#ifdef EXPERIMENTAL_DOMAINKEYS
- if ( (ob->dk_private_key != NULL) && (ob->dk_selector != NULL) )
- ok = dk_transport_write_message(addrlist, inblock.sock,
- topt_use_crlf | topt_end_dot | topt_escape_headers |
- (tblock->body_only? topt_no_headers : 0) |
- (tblock->headers_only? topt_no_body : 0) |
- (tblock->return_path_add? topt_add_return_path : 0) |
- (tblock->delivery_date_add? topt_add_delivery_date : 0) |
- (tblock->envelope_to_add? topt_add_envelope_to : 0),
- 0, /* No size limit */
- tblock->add_headers, tblock->remove_headers,
- US".", US"..", /* Escaping strings */
- tblock->rewrite_rules, tblock->rewrite_existflags,
- ob->dk_private_key, ob->dk_domain, ob->dk_selector,
- ob->dk_canon, ob->dk_headers, ob->dk_strict);
- else
+
+#ifndef DISABLE_DKIM
+ lflags.ok = dkim_transport_write_message(inblock.sock, &tctx, &ob->dkim);
+#else
+ lflags.ok = transport_write_message(inblock.sock, &tctx, 0);
#endif
- ok = transport_write_message(addrlist, inblock.sock,
- topt_use_crlf | topt_end_dot | topt_escape_headers |
- (tblock->body_only? topt_no_headers : 0) |
- (tblock->headers_only? topt_no_body : 0) |
- (tblock->return_path_add? topt_add_return_path : 0) |
- (tblock->delivery_date_add? topt_add_delivery_date : 0) |
- (tblock->envelope_to_add? topt_add_envelope_to : 0),
- 0, /* No size limit */
- tblock->add_headers, tblock->remove_headers,
- US".", US"..", /* Escaping strings */
- tblock->rewrite_rules, tblock->rewrite_existflags);
/* transport_write_message() uses write() because it is called from other
places to write to non-sockets. This means that under some OS (e.g. Solaris)
transport_write_timeout = 0; /* for subsequent transports */
/* Failure can either be some kind of I/O disaster (including timeout),
- or the failure of a transport filter or the expansion of added headers. */
+ or the failure of a transport filter or the expansion of added headers.
+ Or, when CHUNKING, it can be a protocol-detected failure. */
- if (!ok)
- {
- buffer[0] = 0; /* There hasn't been a response */
+ if (!lflags.ok)
goto RESPONSE_FAILED;
- }
/* We used to send the terminating "." explicitly here, but because of
buffering effects at both ends of TCP/IP connections, you don't gain
smtp_command = US"end of data";
- /* For SMTP, we now read a single response that applies to the whole message.
- If it is OK, then all the addresses have been delivered. */
+ if (peer_offered & PEER_OFFERED_CHUNKING && tctx.cmd_count > 1)
+ {
+ /* Reap any outstanding MAIL & RCPT commands, but not a DATA-go-ahead */
+ switch(sync_responses(first_addr, tblock->rcpt_include_affixes, &sync_addr,
+ host, tctx.cmd_count-1, ob->address_retry_include_sender,
+ lflags.pending_MAIL, 0,
+ &inblock, ob->command_timeout, buffer, sizeof(buffer)))
+ {
+ case 3: lflags.ok = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 2: completed_address = TRUE; /* 5xx (only) => progress made */
+ break;
+
+ case 1: lflags.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
+ if (!lflags.lmtp) completed_address = TRUE; /* can't tell about progress yet */
+ case 0: break; /* No 2xx or 5xx, but no probs */
+
+ case -1: goto END_OFF; /* Timeout on RCPT */
+ default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */
+ }
+ }
+
+#ifndef DISABLE_PRDR
+ /* For PRDR we optionally get a partial-responses warning
+ * followed by the individual responses, before going on with
+ * the overall response. If we don't get the warning then deal
+ * with per non-PRDR. */
+ if(lflags.prdr_active)
+ {
+ lflags.ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '3',
+ ob->final_timeout);
+ if (!lflags.ok && errno == 0) switch(buffer[0])
+ {
+ case '2': lflags.prdr_active = FALSE;
+ lflags.ok = TRUE;
+ break;
+ case '4': errno = ERRNO_DATA4XX;
+ addrlist->more_errno |=
+ ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ break;
+ }
+ }
+ else
+#endif
+
+ /* For non-PRDR SMTP, we now read a single response that applies to the
+ whole message. If it is OK, then all the addresses have been delivered. */
- if (!lmtp) ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->final_timeout);
+ if (!lflags.lmtp)
+ {
+ lflags.ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
+ ob->final_timeout);
+ if (!lflags.ok && errno == 0 && buffer[0] == '4')
+ {
+ errno = ERRNO_DATA4XX;
+ addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ }
+ }
/* For LMTP, we get back a response for every RCPT command that we sent;
some may be accepted and some rejected. For those that get a response, their
software before the spool gets updated. Also record the final SMTP
confirmation if needed (for SMTP only). */
- if (ok)
+ if (lflags.ok)
{
int flag = '=';
int delivery_time = (int)(time(NULL) - start_delivery_time);
int len;
- host_item *thost;
uschar *conf = NULL;
- send_rset = FALSE;
- /* Make a copy of the host if it is local to this invocation
- of the transport. */
-
- if (copy_host)
- {
- thost = store_get(sizeof(host_item));
- *thost = *host;
- thost->name = string_copy(host->name);
- thost->address = string_copy(host->address);
- }
- else thost = host;
+ lflags.send_rset = FALSE;
+ pipelining_active = FALSE;
/* Set up confirmation if needed - applies only to SMTP */
- if ((log_extra_selector & LX_smtp_confirmation) != 0 && !lmtp)
+ if (
+#ifdef DISABLE_EVENT
+ LOGGING(smtp_confirmation) &&
+#endif
+ !lflags.lmtp
+ )
{
- uschar *s = string_printing(buffer);
- conf = (s == buffer)? (uschar *)string_copy(s) : s;
+ const uschar *s = string_printing(buffer);
+ /* deconst cast ok here as string_printing was checked to have alloc'n'copied */
+ conf = (s == buffer)? (uschar *)string_copy(s) : US s;
}
- /* Process all transported addresses - for LMTP, read a status for
+ /* Process all transported addresses - for LMTP or PRDR, read a status for
each one. */
for (addr = addrlist; addr != first_addr; addr = addr->next)
/* LMTP - if the response fails badly (e.g. timeout), use it for all the
remaining addresses. Otherwise, it's a return code for just the one
- address. */
+ address. For temporary errors, add a retry item for the address so that
+ it doesn't get tried again too soon. */
- if (lmtp)
+#ifndef DISABLE_PRDR
+ if (lflags.lmtp || lflags.prdr_active)
+#else
+ if (lflags.lmtp)
+#endif
{
if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
ob->final_timeout))
{
if (errno != 0 || buffer[0] == 0) goto RESPONSE_FAILED;
- addr->message = string_sprintf("LMTP error after %s: %s",
+ addr->message = string_sprintf(
+#ifndef DISABLE_PRDR
+ "%s error after %s: %s", lflags.prdr_active ? "PRDR":"LMTP",
+#else
+ "LMTP error after %s: %s",
+#endif
big_buffer, string_printing(buffer));
- addr->transport_return = (buffer[0] == '5')? FAIL : DEFER;
+ setflag(addr, af_pass_message); /* Allow message to go to user */
+ if (buffer[0] == '5')
+ addr->transport_return = FAIL;
+ else
+ {
+ errno = ERRNO_DATA4XX;
+ addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ addr->transport_return = DEFER;
+#ifndef DISABLE_PRDR
+ if (!lflags.prdr_active)
+#endif
+ retry_add_item(addr, addr->address_retry_key, 0);
+ }
continue;
}
completed_address = TRUE; /* NOW we can set this flag */
+ if (LOGGING(smtp_confirmation))
+ {
+ const uschar *s = string_printing(buffer);
+ /* deconst cast ok here as string_printing was checked to have alloc'n'copied */
+ conf = (s == buffer)? (uschar *)string_copy(s) : US s;
+ }
}
/* SMTP, or success return from LMTP for this address. Pass back the
- actual port used. */
+ actual host that was used. */
addr->transport_return = OK;
addr->more_errno = delivery_time;
- thost->port = port;
- addr->host_used = thost;
+ addr->host_used = host;
addr->special_action = flag;
addr->message = conf;
+#ifndef DISABLE_PRDR
+ if (lflags.prdr_active) addr->flags |= af_prdr_used;
+#endif
+ if (peer_offered & PEER_OFFERED_CHUNKING) addr->flags |= af_chunking_used;
flag = '-';
- /* Update the journal. For homonymic addresses, use the base address plus
- the transport name. See lots of comments in deliver.c about the reasons
- for the complications when homonyms are involved. Just carry on after
- write error, as it may prove possible to update the spool file later. */
-
- if (testflag(addr, af_homonym))
- sprintf(CS buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
- else
- sprintf(CS buffer, "%.500s\n", addr->unique);
-
- DEBUG(D_deliver) debug_printf("journalling %s", buffer);
- len = Ustrlen(CS buffer);
- if (write(journal_fd, buffer, len) != len)
- log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
- "%s: %s", buffer, strerror(errno));
+#ifndef DISABLE_PRDR
+ if (!lflags.prdr_active)
+#endif
+ {
+ /* Update the journal. For homonymic addresses, use the base address plus
+ the transport name. See lots of comments in deliver.c about the reasons
+ for the complications when homonyms are involved. Just carry on after
+ write error, as it may prove possible to update the spool file later. */
+
+ if (testflag(addr, af_homonym))
+ sprintf(CS buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
+ else
+ sprintf(CS buffer, "%.500s\n", addr->unique);
+
+ DEBUG(D_deliver) debug_printf("journalling %s\n", buffer);
+ len = Ustrlen(CS buffer);
+ if (write(journal_fd, buffer, len) != len)
+ log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
+ "%s: %s", buffer, strerror(errno));
+ }
}
+#ifndef DISABLE_PRDR
+ if (lflags.prdr_active)
+ {
+ /* PRDR - get the final, overall response. For any non-success
+ upgrade all the address statuses. */
+ lflags.ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
+ ob->final_timeout);
+ if (!lflags.ok)
+ {
+ if(errno == 0 && buffer[0] == '4')
+ {
+ errno = ERRNO_DATA4XX;
+ addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ }
+ for (addr = addrlist; addr != first_addr; addr = addr->next)
+ if (buffer[0] == '5' || addr->transport_return == OK)
+ addr->transport_return = PENDING_OK; /* allow set_errno action */
+ goto RESPONSE_FAILED;
+ }
+
+ /* Update the journal, or setup retry. */
+ for (addr = addrlist; addr != first_addr; addr = addr->next)
+ if (addr->transport_return == OK)
+ {
+ if (testflag(addr, af_homonym))
+ sprintf(CS buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
+ else
+ sprintf(CS buffer, "%.500s\n", addr->unique);
+
+ DEBUG(D_deliver) debug_printf("journalling(PRDR) %s\n", buffer);
+ len = Ustrlen(CS buffer);
+ if (write(journal_fd, buffer, len) != len)
+ log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
+ "%s: %s", buffer, strerror(errno));
+ }
+ else if (addr->transport_return == DEFER)
+ retry_add_item(addr, addr->address_retry_key, -2);
+ }
+#endif
+
/* Ensure the journal file is pushed out to disk. */
- if (fsync(journal_fd) < 0)
+ if (EXIMfsync(journal_fd) < 0)
log_write(0, LOG_MAIN|LOG_PANIC, "failed to fsync journal: %s",
strerror(errno));
}
here during the setting up phase (i.e. before MAIL FROM) then always defer, as
the problem is not related to this specific message. */
-if (!ok)
+if (!lflags.ok)
{
- int code;
+ int code, set_rc;
+ uschar * set_message;
RESPONSE_FAILED:
- save_errno = errno;
- message = NULL;
- send_quit = check_response(host, &save_errno, addrlist->more_errno,
- buffer, &code, &message, &pass_message);
- goto FAILED;
+ {
+ save_errno = errno;
+ message = NULL;
+ lflags.send_quit = check_response(host, &save_errno, addrlist->more_errno,
+ buffer, &code, &message, &pass_message);
+ goto FAILED;
+ }
SEND_FAILED:
- save_errno = errno;
- code = '4';
- message = US string_sprintf("send() to %s [%s] failed: %s",
- host->name, host->address, strerror(save_errno));
- send_quit = FALSE;
- goto FAILED;
+ {
+ save_errno = errno;
+ code = '4';
+ message = US string_sprintf("send() to %s [%s] failed: %s",
+ host->name, host->address, strerror(save_errno));
+ lflags.send_quit = FALSE;
+ goto FAILED;
+ }
/* This label is jumped to directly when a TLS negotiation has failed,
or was not done for a host for which it is required. Values will be set
in message and save_errno, and setting_up will always be true. Treat as
a temporary error. */
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
TLS_FAILED:
code = '4';
- #endif
+#endif
/* If the failure happened while setting up the call, see if the failure was
a 5xx response (this will either be on connection, or following HELO - a 5xx
tried again for a while. */
FAILED:
- ok = FALSE; /* For when reached by GOTO */
+ lflags.ok = FALSE; /* For when reached by GOTO */
+ set_message = message;
- if (setting_up)
- {
+ if (lflags.setting_up)
if (code == '5')
- {
- set_errno(addrlist, save_errno, message, FAIL, pass_message);
- }
+ set_rc = FAIL;
else
+ yield = set_rc = DEFER;
+
+ /* We want to handle timeouts after MAIL or "." and loss of connection after
+ "." specially. They can indicate a problem with the sender address or with
+ the contents of the message rather than a real error on the connection. These
+ cases are treated in the same way as a 4xx response. This next bit of code
+ does the classification. */
+
+ else
+ {
+ BOOL message_error;
+
+ switch(save_errno)
{
- set_errno(addrlist, save_errno, message, DEFER, pass_message);
- yield = DEFER;
+#ifdef SUPPORT_I18N
+ case ERRNO_UTF8_FWD:
+ code = '5';
+ /*FALLTHROUGH*/
+#endif
+ case 0:
+ case ERRNO_MAIL4XX:
+ case ERRNO_DATA4XX:
+ message_error = TRUE;
+ break;
+
+ case ETIMEDOUT:
+ message_error = Ustrncmp(smtp_command,"MAIL",4) == 0 ||
+ Ustrncmp(smtp_command,"end ",4) == 0;
+ break;
+
+ case ERRNO_SMTPCLOSED:
+ message_error = Ustrncmp(smtp_command,"end ",4) == 0;
+ break;
+
+ default:
+ message_error = FALSE;
+ break;
}
- }
-
- /* If there was an I/O error or timeout or other transportation error,
- indicated by errno being non-zero, defer all addresses and yield DEFER,
- except for the case of failed add_headers expansion, or a transport filter
- failure, when the yield should be ERROR, to stop it trying other hosts.
- However, handle timeouts after MAIL FROM or "." and loss of connection after
- "." specially. They can indicate a problem with the sender address or with
- the contents of the message rather than a real error on the connection.
- Therefore, treat these cases in the same way as a 4xx response.
+ /* Handle the cases that are treated as message errors. These are:
- The following condition tests for NOT these special cases. */
+ (a) negative response or timeout after MAIL
+ (b) negative response after DATA
+ (c) negative response or timeout or dropped connection after "."
+ (d) utf8 support required and not offered
- else if (save_errno != 0 &&
- (save_errno != ETIMEDOUT ||
- (Ustrncmp(smtp_command,"MAIL",4) != 0 &&
- Ustrncmp(smtp_command,"end ",4) != 0)) &&
- (save_errno != ERRNO_SMTPCLOSED ||
- Ustrncmp(smtp_command,"end ",4) != 0))
- {
- yield = (save_errno == ERRNO_CHHEADER_FAIL ||
- save_errno == ERRNO_FILTER_FAIL)? ERROR : DEFER;
- set_errno(addrlist, save_errno, message, DEFER, pass_message);
- }
+ It won't be a negative response or timeout after RCPT, as that is dealt
+ with separately above. The action in all cases is to set an appropriate
+ error code for all the addresses, but to leave yield set to OK because the
+ host itself has not failed. Of course, it might in practice have failed
+ when we've had a timeout, but if so, we'll discover that at the next
+ delivery attempt. For a temporary error, set the message_defer flag, and
+ write to the logs for information if this is not the last host. The error
+ for the last host will be logged as part of the address's log line. */
- /* Otherwise we have a message-specific error response from the remote
- host. This is one of
- (a) negative response or timeout after "mail from"
- (b) negative response after "data"
- (c) negative response or timeout or dropped connection after "."
- It won't be a negative response or timeout after "rcpt to", as that is dealt
- with separately above. The action in all cases is to set an appropriate
- error code for all the addresses, but to leave yield set to OK because
- the host itself has not failed. [It might in practice have failed for a
- timeout after MAIL FROM, or "." but if so, we'll discover that at the next
- delivery attempt.] For a temporary error, set the message_defer flag, and
- write to the logs for information if this is not the last host. The error for
- the last host will be logged as part of the address's log line. */
+ if (message_error)
+ {
+ if (mua_wrapper) code = '5'; /* Force hard failure in wrapper mode */
- else
- {
- if (mua_wrapper) code = '5'; /* Force hard failure in wrapper mode */
+ /* If there's an errno, the message contains just the identity of
+ the host. */
- set_errno(addrlist, save_errno, message, (code == '5')? FAIL : DEFER,
- pass_message);
+ if (code == '5')
+ set_rc = FAIL;
+ else /* Anything other than 5 is treated as temporary */
+ {
+ set_rc = DEFER;
+ if (save_errno > 0)
+ message = US string_sprintf("%s: %s", message, strerror(save_errno));
+ if (host->next != NULL) log_write(0, LOG_MAIN, "%s", message);
+ msglog_line(host, message);
+ *message_defer = TRUE;
+ }
+ }
- /* If there's an errno, the message contains just the identity of
- the host. */
+ /* Otherwise, we have an I/O error or a timeout other than after MAIL or
+ ".", or some other transportation error. We defer all addresses and yield
+ DEFER, except for the case of failed add_headers expansion, or a transport
+ filter failure, when the yield should be ERROR, to stop it trying other
+ hosts. */
- if (code != '5') /* Anything other than 5 is treated as temporary */
+ else
{
- if (save_errno > 0)
- message = US string_sprintf("%s: %s", message, strerror(save_errno));
- if (host->next != NULL) log_write(0, LOG_MAIN, "%s", message);
- deliver_msglog("%s %s\n", tod_stamp(tod_log), message);
- *message_defer = TRUE;
+ set_rc = DEFER;
+ yield = (save_errno == ERRNO_CHHEADER_FAIL ||
+ save_errno == ERRNO_FILTER_FAIL)? ERROR : DEFER;
}
}
+
+ set_errno(addrlist, save_errno, set_message, set_rc, pass_message, host
+#ifdef EXPERIMENTAL_DSN_INFO
+ , smtp_greeting, helo_response
+#endif
+ );
}
DEBUG(D_transport)
debug_printf("ok=%d send_quit=%d send_rset=%d continue_more=%d "
- "yield=%d first_address is %sNULL\n", ok, send_quit, send_rset,
- continue_more, yield, (first_addr == NULL)? "":"not ");
+ "yield=%d first_address is %sNULL\n", lflags.ok, lflags.send_quit,
+ lflags.send_rset, continue_more, yield, first_addr ? "not " : "");
-if (completed_address && ok && send_quit)
+if (completed_address && lflags.ok && lflags.send_quit)
{
BOOL more;
- if (first_addr != NULL || continue_more ||
- (
- (tls_active < 0 ||
- verify_check_this_host(&(ob->hosts_nopass_tls), NULL, host->name,
- host->address, NULL) != OK)
+ smtp_compare_t t_compare;
+
+ t_compare.tblock = tblock;
+ t_compare.current_sender_address = sender_address;
+
+ if ( first_addr != NULL
+ || continue_more
+ || ( ( tls_out.active < 0
+ || verify_check_given_host(&ob->hosts_nopass_tls, host) != OK
+ )
&&
transport_check_waiting(tblock->name, host->name,
- tblock->connection_max_messages, new_message_id, &more)
- ))
+ tblock->connection_max_messages, new_message_id, &more,
+ (oicf)smtp_are_same_identities, (void*)&t_compare)
+ ) )
{
uschar *msg;
BOOL pass_message;
- if (send_rset)
+ if (lflags.send_rset)
{
- if (! (ok = smtp_write_command(&outblock, FALSE, "RSET\r\n") >= 0))
+ if (! (lflags.ok = smtp_write_command(&outblock, FALSE, "RSET\r\n") >= 0))
{
msg = US string_sprintf("send() to %s [%s] failed: %s", host->name,
host->address, strerror(save_errno));
- send_quit = FALSE;
+ lflags.send_quit = FALSE;
}
- else if (! (ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout)))
+ else if (! (lflags.ok = smtp_read_response(&inblock, buffer,
+ sizeof(buffer), '2', ob->command_timeout)))
{
int code;
- send_quit = check_response(host, &errno, 0, buffer, &code, &msg,
+ lflags.send_quit = check_response(host, &errno, 0, buffer, &code, &msg,
&pass_message);
- if (!send_quit)
+ if (!lflags.send_quit)
{
- DEBUG(D_transport) debug_printf("%s\n", msg);
+ DEBUG(D_transport) debug_printf("H=%s [%s] %s\n",
+ host->name, host->address, msg);
}
}
}
/* Either RSET was not needed, or it succeeded */
- if (ok)
+ if (lflags.ok)
{
if (first_addr != NULL) /* More addresses still to be sent */
{ /* in this run of the transport */
when TLS is shut down. We test for this by sending a new EHLO. If we
don't get a good response, we don't attempt to pass the socket on. */
- #ifdef SUPPORT_TLS
- if (tls_active >= 0)
+#ifdef SUPPORT_TLS
+ if (tls_out.active >= 0)
{
- tls_close(TRUE);
- ok = smtp_write_command(&outblock,FALSE,"EHLO %s\r\n",helo_data) >= 0 &&
- smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout);
+ tls_close(FALSE, TRUE);
+ smtp_peer_options = smtp_peer_options_wrap;
+ if (lflags.smtps)
+ lflags.ok = FALSE;
+ else
+ lflags.ok = smtp_write_command(&outblock,FALSE,"EHLO %s\r\n",helo_data) >= 0 &&
+ smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
+ ob->command_timeout);
}
- #endif
+#endif
/* If the socket is successfully passed, we musn't send QUIT (or
indeed anything!) from here. */
- if (ok && transport_pass_socket(tblock->name, host->name, host->address,
- new_message_id, inblock.sock))
- {
- send_quit = FALSE;
- }
+/*XXX DSN_INFO: assume likely to do new HELO; but for greet we'll want to
+propagate it from the initial
+*/
+ if (lflags.ok && transport_pass_socket(tblock->name, host->name,
+ host->address, new_message_id, inblock.sock))
+ lflags.send_quit = FALSE;
}
/* If RSET failed and there are addresses left, they get deferred. */
- else set_errno(first_addr, errno, msg, DEFER, FALSE);
+ else set_errno(first_addr, errno, msg, DEFER, FALSE, host
+#ifdef EXPERIMENTAL_DSN_INFO
+ , smtp_greeting, helo_response
+#endif
+ );
}
}
operation, the old commented-out code was removed on 17-Sep-99. */
SEND_QUIT:
-if (send_quit) (void)smtp_write_command(&outblock, FALSE, "QUIT\r\n");
+if (lflags.send_quit) (void)smtp_write_command(&outblock, FALSE, "QUIT\r\n");
END_OFF:
#ifdef SUPPORT_TLS
-tls_close(TRUE);
+tls_close(FALSE, TRUE);
#endif
/* Close the socket, and return the appropriate value, first setting
-continue_transport and continue_hostname NULL to prevent any other addresses
-that may include the host from trying to re-use a continuation socket. This
works because the NULL setting is passed back to the calling process, and
remote_max_parallel is forced to 1 when delivering over an existing connection,
specified in the transports, and therefore not visible at top level, in which
case continue_more won't get set. */
+HDEBUG(D_transport|D_acl|D_v) debug_printf(" SMTP(close)>>\n");
+if (lflags.send_quit)
+ {
+ shutdown(outblock.sock, SHUT_WR);
+ for (rc = 16; read(inblock.sock, inbuffer, sizeof(inbuffer)) > 0 && rc > 0;)
+ rc--; /* drain socket */
+ }
(void)close(inblock.sock);
+
+#ifndef DISABLE_EVENT
+(void) event_raise(tblock->event_action, US"tcp:close", NULL);
+#endif
+
continue_transport = NULL;
continue_hostname = NULL;
return yield;
{
address_item *first_addr = NULL;
address_item *addr;
-for (addr = addrlist; addr != NULL; addr = addr->next)
- {
- if (addr->transport_return != DEFER) continue;
- if (first_addr == NULL) first_addr = addr;
- addr->transport_return = PENDING_DEFER;
- addr->basic_errno = 0;
- addr->more_errno = (host->mx >= 0)? 'M' : 'A';
- addr->message = NULL;
- #ifdef SUPPORT_TLS
- addr->cipher = NULL;
- addr->peerdn = NULL;
- #endif
- }
+for (addr = addrlist; addr; addr = addr->next)
+ if (addr->transport_return == DEFER)
+ {
+ if (!first_addr) first_addr = addr;
+ addr->transport_return = PENDING_DEFER;
+ addr->basic_errno = 0;
+ addr->more_errno = (host->mx >= 0)? 'M' : 'A';
+ addr->message = NULL;
+#ifdef SUPPORT_TLS
+ addr->cipher = NULL;
+ addr->ourcert = NULL;
+ addr->peercert = NULL;
+ addr->peerdn = NULL;
+ addr->ocsp = OCSP_NOT_REQ;
+#endif
+#ifdef EXPERIMENTAL_DSN_INFO
+ addr->smtp_greeting = NULL;
+ addr->helo_response = NULL;
+#endif
+ }
return first_addr;
}
int total_hosts_tried = 0;
address_item *addr;
BOOL expired = TRUE;
-BOOL continuing = continue_hostname != NULL;
uschar *expanded_hosts = NULL;
uschar *pistring;
uschar *tid = string_sprintf("%s transport", tblock->name);
DEBUG(D_transport)
{
debug_printf("%s transport entered\n", tblock->name);
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ for (addr = addrlist; addr; addr = addr->next)
debug_printf(" %s\n", addr->address);
- if (continuing) debug_printf("already connected to %s [%s]\n",
+ if (hostlist)
+ {
+ debug_printf("hostlist:\n");
+ for (host = hostlist; host; host = host->next)
+ debug_printf(" %s:%d\n", host->name, host->port);
+ }
+ if (continue_hostname) debug_printf("already connected to %s [%s]\n",
continue_hostname, continue_host_address);
}
+/* Set the flag requesting that these hosts be added to the waiting
+database if the delivery fails temporarily or if we are running with
+queue_smtp or a 2-stage queue run. This gets unset for certain
+kinds of error, typically those that are specific to the message. */
+
+update_waiting = TRUE;
+
/* If a host list is not defined for the addresses - they must all have the
same one in order to be passed to a single transport - or if the transport has
a host list with hosts_override set, use the host list supplied with the
transport. It is an error for this not to exist. */
-if (hostlist == NULL || (ob->hosts_override && ob->hosts != NULL))
+if (!hostlist || (ob->hosts_override && ob->hosts))
{
- if (ob->hosts == NULL)
+ if (!ob->hosts)
{
addrlist->message = string_sprintf("%s transport called with no hosts set",
tblock->name);
as the hosts string will never be used again, it doesn't matter that we
replace all the : characters with zeros. */
- if (ob->hostlist == NULL)
+ if (!ob->hostlist)
{
uschar *s = ob->hosts;
if (Ustrchr(s, '$') != NULL)
{
- expanded_hosts = expand_string(s);
- if (expanded_hosts == NULL)
+ if (!(expanded_hosts = expand_string(s)))
{
addrlist->message = string_sprintf("failed to expand list of hosts "
"\"%s\" in %s transport: %s", s, tblock->name, expand_string_message);
- addrlist->transport_return = search_find_defer? DEFER : PANIC;
+ addrlist->transport_return = search_find_defer ? DEFER : PANIC;
return FALSE; /* Only top address has status */
}
DEBUG(D_transport) debug_printf("expanded list of hosts \"%s\" to "
host_build_hostlist(&hostlist, s, ob->hosts_randomize);
+ /* Check that the expansion yielded something useful. */
+ if (!hostlist)
+ {
+ addrlist->message =
+ string_sprintf("%s transport has empty hosts setting", tblock->name);
+ addrlist->transport_return = PANIC;
+ return FALSE; /* Only top address has status */
+ }
+
/* If there was no expansion of hosts, save the host list for
next time. */
- if (expanded_hosts == NULL) ob->hostlist = hostlist;
+ if (!expanded_hosts) ob->hostlist = hostlist;
}
/* This is not the first time this transport has been run in this delivery;
the host list was built previously. */
- else hostlist = ob->hostlist;
+ else
+ hostlist = ob->hostlist;
}
/* The host list was supplied with the address. If hosts_randomize is set, we
already been randomized (but don't bother if continuing down an existing
connection). */
-else if (ob->hosts_randomize && hostlist->mx == MX_NONE && !continuing)
+else if (ob->hosts_randomize && hostlist->mx == MX_NONE && !continue_hostname)
{
host_item *newlist = NULL;
- while (hostlist != NULL)
+ while (hostlist)
{
host_item *h = hostlist;
hostlist = hostlist->next;
h->sort_key = random_number(100);
- if (newlist == NULL)
+ if (!newlist)
{
h->next = NULL;
newlist = h;
else
{
host_item *hh = newlist;
- while (hh->next != NULL)
+ while (hh->next)
{
if (h->sort_key < hh->next->sort_key) break;
hh = hh->next;
hostlist = addrlist->host_list = newlist;
}
-
-/* Sort out the port. Set up a string for adding to the retry key if the port
-number is not the standard SMTP port. */
+/* Sort out the default port. */
if (!smtp_get_port(ob->port, addrlist, &port, tid)) return FALSE;
-pistring = string_sprintf(":%d", port);
-if (Ustrcmp(pistring, ":25") == 0) pistring = US"";
-
/* For each host-plus-IP-address on the list:
time. After that, set the status and error data for any addresses that haven't
had it set already. */
-for (cutoff_retry = 0; expired &&
- cutoff_retry < ((ob->delay_after_cutoff)? 1 : 2);
+for (cutoff_retry = 0;
+ expired && cutoff_retry < (ob->delay_after_cutoff ? 1 : 2);
cutoff_retry++)
{
host_item *nexthost = NULL;
int unexpired_hosts_tried = 0;
for (host = hostlist;
- host != NULL &&
- unexpired_hosts_tried < ob->hosts_max_try &&
- total_hosts_tried < ob->hosts_max_try_hardlimit;
+ host
+ && unexpired_hosts_tried < ob->hosts_max_try
+ && total_hosts_tried < ob->hosts_max_try_hardlimit;
host = nexthost)
{
int rc;
int host_af;
uschar *rs;
- BOOL serialized = FALSE;
BOOL host_is_expired = FALSE;
BOOL message_defer = FALSE;
- BOOL ifchanges = FALSE;
BOOL some_deferred = FALSE;
address_item *first_addr = NULL;
uschar *interface = NULL;
nexthost = host->next;
- /* Set the flag requesting that this host be added to the waiting
- database if the delivery fails temporarily or if we are running with
- queue_smtp or a 2-stage queue run. This gets unset for certain
- kinds of error, typically those that are specific to the message. */
-
- host->update_waiting = TRUE;
-
/* If the address hasn't yet been obtained from the host name, look it up
now, unless the host is already marked as unusable. If it is marked as
unusable, it means that the router was unable to find its IP address (in
Note that we mustn't skip unusable hosts if the address is not unset; they
may be needed as expired hosts on the 2nd time round the cutoff loop. */
- if (host->address == NULL)
+ if (!host->address)
{
- uschar *canonical_name;
+ int new_port, flags;
+ host_item *hh;
if (host->status >= hstatus_unusable)
{
DEBUG(D_transport) debug_printf("getting address for %s\n", host->name);
+ /* The host name is permitted to have an attached port. Find it, and
+ strip it from the name. Just remember it for now. */
+
+ new_port = host_item_get_port(host);
+
+ /* Count hosts looked up */
+
hosts_looked_up++;
/* Find by name if so configured, or if it's an IP address. We don't
just copy the IP address, because we need the test-for-local to happen. */
- if (ob->gethostbyname || string_is_ip_address(host->name, NULL) > 0)
- rc = host_find_byname(host, NULL, &canonical_name, TRUE);
+ flags = HOST_FIND_BY_A;
+ if (ob->dns_qualify_single) flags |= HOST_FIND_QUALIFY_SINGLE;
+ if (ob->dns_search_parents) flags |= HOST_FIND_SEARCH_PARENTS;
+
+ if (ob->gethostbyname || string_is_ip_address(host->name, NULL) != 0)
+ rc = host_find_byname(host, NULL, flags, NULL, TRUE);
else
- {
- int flags = HOST_FIND_BY_A;
- if (ob->dns_qualify_single) flags |= HOST_FIND_QUALIFY_SINGLE;
- if (ob->dns_search_parents) flags |= HOST_FIND_SEARCH_PARENTS;
rc = host_find_bydns(host, NULL, flags, NULL, NULL, NULL,
- &canonical_name, NULL);
- }
+ &ob->dnssec, /* domains for request/require */
+ NULL, NULL);
+
+ /* Update the host (and any additional blocks, resulting from
+ multihoming) with a host-specific port, if any. */
+
+ for (hh = host; hh != nexthost; hh = hh->next) hh->port = new_port;
/* Failure to find the host at this time (usually DNS temporary failure)
is really a kind of routing failure rather than a transport failure.
"HOST_FIND_AGAIN" : "HOST_FIND_FAILED", host->name);
host->status = hstatus_unusable;
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ for (addr = addrlist; addr; addr = addr->next)
{
if (addr->transport_return != DEFER) continue;
addr->basic_errno = ERRNO_UNKNOWNHOST;
if (rc == HOST_FOUND_LOCAL && !ob->allow_localhost)
{
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ for (addr = addrlist; addr; addr = addr->next)
{
addr->basic_errno = 0;
addr->message = string_sprintf("%s transport found host %s to be "
result of the lookup. Set expired FALSE, to save the outer loop executing
twice. */
- if (continuing && (Ustrcmp(continue_hostname, host->name) != 0 ||
- Ustrcmp(continue_host_address, host->address) != 0))
+ if ( continue_hostname
+ && ( Ustrcmp(continue_hostname, host->name) != 0
+ || Ustrcmp(continue_host_address, host->address) != 0
+ ) )
{
expired = FALSE;
continue; /* With next host */
doing a two-stage queue run, don't do this if forcing. */
if ((!deliver_force || queue_2stage) && (queue_smtp ||
- match_isinlist(addrlist->domain, &queue_smtp_domains, 0, NULL, NULL,
- MCL_DOMAIN, TRUE, NULL) == OK))
+ match_isinlist(addrlist->domain,
+ (const uschar **)&queue_smtp_domains, 0,
+ &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL) == OK))
{
expired = FALSE;
- for (addr = addrlist; addr != NULL; addr = addr->next)
- {
- if (addr->transport_return != DEFER) continue;
- addr->message = US"domain matches queue_smtp_domains, or -odqs set";
- }
+ for (addr = addrlist; addr; addr = addr->next)
+ if (addr->transport_return == DEFER)
+ addr->message = US"domain matches queue_smtp_domains, or -odqs set";
continue; /* With next host */
}
deliver_host = host->name;
deliver_host_address = host->address;
+ lookup_dnssec_authenticated = host->dnssec == DS_YES ? US"yes"
+ : host->dnssec == DS_NO ? US"no"
+ : US"";
+
+ /* Set up a string for adding to the retry key if the port number is not
+ the standard SMTP port. A host may have its own port setting that overrides
+ the default. */
+
+ pistring = string_sprintf(":%d", host->port == PORT_NONE
+ ? port : host->port);
+ if (Ustrcmp(pistring, ":25") == 0) pistring = US"";
/* Select IPv4 or IPv6, and choose an outgoing interface. If the interface
- string changes upon expansion, we must add it to the key that is used for
- retries, because connections to the same host from a different interface
- should be treated separately. */
+ string is set, even if constant (as different transports can have different
+ constant settings), we must add it to the key that is used for retries,
+ because connections to the same host from a different interface should be
+ treated separately. */
- host_af = (Ustrchr(host->address, ':') == NULL)? AF_INET : AF_INET6;
- if (!smtp_get_interface(ob->interface, host_af, addrlist, &ifchanges,
- &interface, tid))
- return FALSE;
- if (ifchanges) pistring = string_sprintf("%s/%s", pistring, interface);
+ host_af = Ustrchr(host->address, ':') == NULL ? AF_INET : AF_INET6;
+ if ((rs = ob->interface) && *rs)
+ {
+ if (!smtp_get_interface(rs, host_af, addrlist, &interface, tid))
+ return FALSE;
+ pistring = string_sprintf("%s/%s", pistring, interface);
+ }
/* The first time round the outer loop, check the status of the host by
inspecting the retry data. The second time round, we are interested only
if (cutoff_retry == 0)
{
+ BOOL incl_ip;
/* Ensure the status of the address is set by checking retry data if
- necessary. There maybe host-specific retry data (applicable to all
+ necessary. There may be host-specific retry data (applicable to all
messages) and also data for retries of a specific message at this host.
If either of these retry records are actually read, the keys used are
returned to save recomputing them later. */
+ if (exp_bool(addrlist, US"transport", tblock->name, D_transport,
+ US"retry_include_ip_address", ob->retry_include_ip_address,
+ ob->expand_retry_include_ip_address, &incl_ip) != OK)
+ continue; /* with next host */
+
host_is_expired = retry_check_address(addrlist->domain, host, pistring,
- ob->retry_include_ip_address, &retry_host_key, &retry_message_key);
+ incl_ip, &retry_host_key, &retry_message_key);
DEBUG(D_transport) debug_printf("%s [%s]%s status = %s\n", host->name,
(host->address == NULL)? US"" : host->address, pistring,
switch (host->status)
{
case hstatus_unusable:
- expired = FALSE;
- setflag(addrlist, af_retry_skipped);
- /* Fall through */
+ expired = FALSE;
+ setflag(addrlist, af_retry_skipped);
+ /* Fall through */
case hstatus_unusable_expired:
- switch (host->why)
- {
- case hwhy_retry: hosts_retry++; break;
- case hwhy_failed: hosts_fail++; break;
- case hwhy_deferred: hosts_defer++; break;
- }
-
- /* If there was a retry message key, implying that previously there
- was a message-specific defer, we don't want to update the list of
- messages waiting for this host. */
-
- if (retry_message_key != NULL) host->update_waiting = FALSE;
- continue; /* With the next host or IP address */
+ switch (host->why)
+ {
+ case hwhy_retry: hosts_retry++; break;
+ case hwhy_failed: hosts_fail++; break;
+ case hwhy_deferred: hosts_defer++; break;
+ }
+
+ /* If there was a retry message key, implying that previously there
+ was a message-specific defer, we don't want to update the list of
+ messages waiting for these hosts. */
+
+ if (retry_message_key) update_waiting = FALSE;
+ continue; /* With the next host or IP address */
}
}
else
{
- if (host->address == NULL ||
- host->status != hstatus_unusable_expired ||
- host->last_try > received_time)
+ if ( !host->address
+ || host->status != hstatus_unusable_expired
+ || host->last_try > received_time)
continue;
- DEBUG(D_transport)
- debug_printf("trying expired host %s [%s]%s\n",
+ DEBUG(D_transport) debug_printf("trying expired host %s [%s]%s\n",
host->name, host->address, pistring);
host_is_expired = TRUE;
}
and remember this for later deletion. Do not do any of this if we are
sending the message down a pre-existing connection. */
- if (!continuing &&
- verify_check_this_host(&(ob->serialize_hosts), NULL, host->name,
- host->address, NULL) == OK)
+ if ( !continue_hostname
+ && verify_check_given_host(&ob->serialize_hosts, host) == OK)
{
serialize_key = string_sprintf("host-serialize-%s", host->name);
- if (!enq_start(serialize_key))
+ if (!enq_start(serialize_key, 1))
{
DEBUG(D_transport)
debug_printf("skipping host %s because another Exim process "
hosts_serial++;
continue;
}
- serialized = TRUE;
}
/* OK, we have an IP address that is not waiting for its retry time to
DEBUG(D_transport) debug_printf("delivering %s to %s [%s] (%s%s)\n",
message_id, host->name, host->address, addrlist->address,
- (addrlist->next == NULL)? "" : ", ...");
+ addrlist->next ? ", ..." : "");
set_process_info("delivering %s to %s [%s] (%s%s)",
message_id, host->name, host->address, addrlist->address,
- (addrlist->next == NULL)? "" : ", ...");
+ addrlist->next ? ", ..." : "");
/* This is not for real; don't do the delivery. If there are
any remaining hosts, list them. */
if (dont_deliver)
{
host_item *host2;
- set_errno(addrlist, 0, NULL, OK, FALSE);
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ set_errno_nohost(addrlist, 0, NULL, OK, FALSE);
+ for (addr = addrlist; addr; addr = addr->next)
{
addr->host_used = host;
addr->special_action = '*';
{
debug_printf("*** delivery by %s transport bypassed by -N option\n"
"*** host and remaining hosts:\n", tblock->name);
- for (host2 = host; host2 != NULL; host2 = host2->next)
+ for (host2 = host; host2; host2 = host2->next)
debug_printf(" %s [%s]\n", host2->name,
- (host2->address == NULL)? US"unset" : host2->address);
+ host2->address ? host2->address : US"unset");
}
rc = OK;
}
else
{
+ host_item * thost;
+ /* Make a copy of the host if it is local to this invocation
+ of the transport. */
+
+ if (expanded_hosts)
+ {
+ thost = store_get(sizeof(host_item));
+ *thost = *host;
+ thost->name = string_copy(host->name);
+ thost->address = string_copy(host->address);
+ }
+ else
+ thost = host;
+
if (!host_is_expired && ++unexpired_hosts_tried >= ob->hosts_max_try)
{
host_item *h;
DEBUG(D_transport)
debug_printf("hosts_max_try limit reached with this host\n");
- for (h = host; h != NULL; h = h->next)
- if (h->mx != host->mx) break;
- if (h != NULL)
- {
- nexthost = h;
- unexpired_hosts_tried--;
- DEBUG(D_transport) debug_printf("however, a higher MX host exists "
- "and will be tried\n");
- }
+ for (h = host; h; h = h->next) if (h->mx != host->mx)
+ {
+ nexthost = h;
+ unexpired_hosts_tried--;
+ DEBUG(D_transport) debug_printf("however, a higher MX host exists "
+ "and will be tried\n");
+ break;
+ }
}
/* Attempt the delivery. */
total_hosts_tried++;
- rc = smtp_deliver(addrlist, host, host_af, port, interface, tblock,
- expanded_hosts != NULL, &message_defer, FALSE);
+ rc = smtp_deliver(addrlist, thost, host_af, port, interface, tblock,
+ &message_defer, FALSE);
/* Yield is one of:
OK => connection made, each address contains its result;
failures, where the log has already been written. If all hosts defer a
general message is written at the end. */
- if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL &&
- first_addr->basic_errno != ERRNO_TLSFAILURE)
+ if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL
+ && first_addr->basic_errno != ERRNO_TLSFAILURE)
write_logs(first_addr, host);
+#ifndef DISABLE_EVENT
+ if (rc == DEFER)
+ deferred_event_raise(first_addr, host);
+#endif
+
/* If STARTTLS was accepted, but there was a failure in setting up the
TLS session (usually a certificate screwup), and the host is not in
hosts_require_tls, and tls_tempfail_tryclear is true, try again, with
session, so the in-clear transmission after those errors, if permitted,
happens inside smtp_deliver().] */
- #ifdef SUPPORT_TLS
- if (rc == DEFER && first_addr->basic_errno == ERRNO_TLSFAILURE &&
- ob->tls_tempfail_tryclear &&
- verify_check_this_host(&(ob->hosts_require_tls), NULL, host->name,
- host->address, NULL) != OK)
+#ifdef SUPPORT_TLS
+ if ( rc == DEFER
+ && first_addr->basic_errno == ERRNO_TLSFAILURE
+ && ob->tls_tempfail_tryclear
+ && verify_check_given_host(&ob->hosts_require_tls, host) != OK
+ )
{
log_write(0, LOG_MAIN, "TLS session failure: delivering unencrypted "
"to %s [%s] (not in hosts_require_tls)", host->name, host->address);
first_addr = prepare_addresses(addrlist, host);
- rc = smtp_deliver(addrlist, host, host_af, port, interface, tblock,
- expanded_hosts != NULL, &message_defer, TRUE);
+ rc = smtp_deliver(addrlist, thost, host_af, port, interface, tblock,
+ &message_defer, TRUE);
if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL)
write_logs(first_addr, host);
+# ifndef DISABLE_EVENT
+ if (rc == DEFER)
+ deferred_event_raise(first_addr, host);
+# endif
}
- #endif
+#endif /*SUPPORT_TLS*/
}
/* Delivery attempt finished */
- rs = (rc == OK)? US"OK" : (rc == DEFER)? US"DEFER" : (rc == ERROR)?
- US"ERROR" : US"?";
+ rs = rc == OK ? US"OK"
+ : rc == DEFER ? US"DEFER"
+ : rc == ERROR ? US"ERROR"
+ : US"?";
set_process_info("delivering %s: just tried %s [%s] for %s%s: result %s",
message_id, host->name, host->address, addrlist->address,
- (addrlist->next == NULL)? "" : " (& others)", rs);
+ addrlist->next ? " (& others)" : "", rs);
/* Release serialization if set up */
- if (serialized) enq_end(serialize_key);
+ if (serialize_key) enq_end(serialize_key);
/* If the result is DEFER, or if a host retry record is known to exist, we
need to add an item to the retry chain for updating the retry database
the unusable tree at the outer level, so even if different address blocks
contain the same address, it still won't get tried again.) */
- if (rc == DEFER || retry_host_key != NULL)
+ if (rc == DEFER || retry_host_key)
{
- int delete_flag = (rc != DEFER)? rf_delete : 0;
- if (retry_host_key == NULL)
+ int delete_flag = rc != DEFER ? rf_delete : 0;
+ if (!retry_host_key)
{
- retry_host_key = ob->retry_include_ip_address?
- string_sprintf("T:%S:%s%s", host->name, host->address, pistring) :
- string_sprintf("T:%S%s", host->name, pistring);
+ BOOL incl_ip;
+ if (exp_bool(addrlist, US"transport", tblock->name, D_transport,
+ US"retry_include_ip_address", ob->retry_include_ip_address,
+ ob->expand_retry_include_ip_address, &incl_ip) != OK)
+ incl_ip = TRUE; /* error; use most-specific retry record */
+
+ retry_host_key = incl_ip
+ ? string_sprintf("T:%S:%s%s", host->name, host->address, pistring)
+ : string_sprintf("T:%S%s", host->name, pistring);
}
/* If a delivery of another message over an existing SMTP connection
host is genuinely down, another non-continued message delivery will
notice it soon enough. */
- if (delete_flag != 0 || !continuing)
+ if (delete_flag != 0 || !continue_hostname)
retry_add_item(first_addr, retry_host_key, rf_host | delete_flag);
/* We may have tried an expired host, if its retry time has come; ensure
if (rc == DEFER)
{
- host->status = (host_is_expired)?
- hstatus_unusable_expired : hstatus_unusable;
+ host->status = host_is_expired
+ ? hstatus_unusable_expired : hstatus_unusable;
host->why = hwhy_deferred;
}
}
to the retry chain. Note that if there was a message defer but now there is
a host defer, the message defer record gets deleted. That seems perfectly
reasonable. Also, stop the message from being remembered as waiting
- for this host. */
+ for specific hosts. */
- if (message_defer || retry_message_key != NULL)
+ if (message_defer || retry_message_key)
{
- int delete_flag = message_defer? 0 : rf_delete;
- if (retry_message_key == NULL)
+ int delete_flag = message_defer ? 0 : rf_delete;
+ if (!retry_message_key)
{
- retry_message_key = ob->retry_include_ip_address?
- string_sprintf("T:%S:%s%s:%s", host->name, host->address, pistring,
- message_id) :
- string_sprintf("T:%S%s:%s", host->name, pistring, message_id);
+ BOOL incl_ip;
+ if (exp_bool(addrlist, US"transport", tblock->name, D_transport,
+ US"retry_include_ip_address", ob->retry_include_ip_address,
+ ob->expand_retry_include_ip_address, &incl_ip) != OK)
+ incl_ip = TRUE; /* error; use most-specific retry record */
+
+ retry_message_key = incl_ip
+ ? string_sprintf("T:%S:%s%s:%s", host->name, host->address, pistring,
+ message_id)
+ : string_sprintf("T:%S%s:%s", host->name, pistring, message_id);
}
retry_add_item(addrlist, retry_message_key,
rf_message | rf_host | delete_flag);
- host->update_waiting = FALSE;
+ update_waiting = FALSE;
}
/* Any return other than DEFER (that is, OK or ERROR) means that the
case, see if any of them are deferred. */
if (rc == OK)
- {
- for (addr = addrlist; addr != NULL; addr = addr->next)
- {
+ for (addr = addrlist; addr; addr = addr->next)
if (addr->transport_return == DEFER)
{
some_deferred = TRUE;
break;
}
- }
- }
/* If no addresses deferred or the result was ERROR, return. We do this for
ERROR because a failing filter set-up or add_headers expansion is likely to
case when we were trying to deliver down an existing channel and failed.
Don't try any other hosts in this case. */
- if (continuing) break;
+ if (continue_hostname) break;
/* If the whole delivery, or some individual addresses, were deferred and
there are more hosts that could be tried, do not count this host towards
important because if we don't try all hosts, the address will never time
out. NOTE: this does not apply to hosts_max_try_hardlimit. */
- if ((rc == DEFER || some_deferred) && nexthost != NULL)
+ if ((rc == DEFER || some_deferred) && nexthost)
{
BOOL timedout;
retry_config *retry = retry_find_config(host->name, NULL, 0, 0);
- if (retry != NULL && retry->rules != NULL)
+ if (retry && retry->rules)
{
retry_rule *last_rule;
for (last_rule = retry->rules;
- last_rule->next != NULL;
+ last_rule->next;
last_rule = last_rule->next);
timedout = time(NULL) - received_time > last_rule->timeout;
}
if (mua_wrapper)
{
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ for (addr = addrlist; addr; addr = addr->next)
addr->transport_return = FAIL;
goto END_TRANSPORT;
}
down an existing TCP/IP connection, and something caused the host not to be
found, we end up here, but can detect these cases and handle them specially. */
-for (addr = addrlist; addr != NULL; addr = addr->next)
+for (addr = addrlist; addr; addr = addr->next)
{
/* If host is not NULL, it means that we stopped processing the host list
because of hosts_max_try or hosts_max_try_hardlimit. In the former case, this
However, if we have hit hosts_max_try_hardlimit, we want to behave as if all
hosts were tried. */
- if (host != NULL)
- {
+ if (host)
if (total_hosts_tried >= ob->hosts_max_try_hardlimit)
{
DEBUG(D_transport)
debug_printf("hosts_max_try limit caused some hosts to be skipped\n");
setflag(addr, af_retry_skipped);
}
- }
if (queue_smtp) /* no deliveries attempted */
{
addr->message = US"SMTP delivery explicitly queued";
}
- else if (addr->transport_return == DEFER &&
- (addr->basic_errno == ERRNO_UNKNOWNERROR || addr->basic_errno == 0) &&
- addr->message == NULL)
+ else if ( addr->transport_return == DEFER
+ && (addr->basic_errno == ERRNO_UNKNOWNERROR || addr->basic_errno == 0)
+ && !addr->message
+ )
{
addr->basic_errno = ERRNO_HRETRY;
- if (continue_hostname != NULL)
- {
+ if (continue_hostname)
addr->message = US"no host found for existing SMTP connection";
- }
else if (expired)
{
- addr->message = (ob->delay_after_cutoff)?
- US"retry time not reached for any host after a long failure period" :
- US"all hosts have been failing for a long time and were last tried "
- "after this message arrived";
+ setflag(addr, af_pass_message); /* This is not a security risk */
+ addr->message = string_sprintf(
+ "all hosts%s have been failing for a long time %s",
+ addr->domain ? string_sprintf(" for '%s'", addr->domain) : US"",
+ ob->delay_after_cutoff
+ ? US"(and retry time not reached)"
+ : US"and were last tried after this message arrived");
/* If we are already using fallback hosts, or there are no fallback hosts
defined, convert the result to FAIL to cause a bounce. */
- if (addr->host_list == addr->fallback_hosts ||
- addr->fallback_hosts == NULL)
+ if (addr->host_list == addr->fallback_hosts || !addr->fallback_hosts)
addr->transport_return = FAIL;
}
else
{
+ const char * s;
if (hosts_retry == hosts_total)
- addr->message = US"retry time not reached for any host";
+ s = "retry time not reached for any host%s";
else if (hosts_fail == hosts_total)
- addr->message = US"all host address lookups failed permanently";
+ s = "all host address lookups%s failed permanently";
else if (hosts_defer == hosts_total)
- addr->message = US"all host address lookups failed temporarily";
+ s = "all host address lookups%s failed temporarily";
else if (hosts_serial == hosts_total)
- addr->message = US"connection limit reached for all hosts";
+ s = "connection limit reached for all hosts%s";
else if (hosts_fail+hosts_defer == hosts_total)
- addr->message = US"all host address lookups failed";
- else addr->message = US"some host address lookups failed and retry time "
- "not reached for other hosts or connection limit reached";
+ s = "all host address lookups%s failed";
+ else
+ s = "some host address lookups failed and retry time "
+ "not reached for other hosts or connection limit reached%s";
+
+ addr->message = string_sprintf(s,
+ addr->domain ? string_sprintf(" for '%s'", addr->domain) : US"");
}
}
}
/* Update the database which keeps information about which messages are waiting
-for which hosts to become available. Each host in the list has a flag which is
-set if the data is to be updated. For some message-specific errors, the flag is
-turned off because we don't want follow-on deliveries in those cases. */
+for which hosts to become available. For some message-specific errors, the
+update_waiting flag is turned off because we don't want follow-on deliveries in
+those cases. If this transport instance is explicitly limited to one message
+per connection then follow-on deliveries are not possible and there's no need
+to create/update the per-transport wait-<transport_name> database. */
-transport_update_waiting(hostlist, tblock->name);
+if (update_waiting && tblock->connection_max_messages != 1)
+ transport_update_waiting(hostlist, tblock->name);
END_TRANSPORT:
return TRUE; /* Each address has its status */
}
+/* vi: aw ai sw=2
+*/
/* End of transport/smtp.c */
projects / exim.git / blobdiff