* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2015 */
+/* Copyright (c) University of Cambridge 1995 - 2016 */
/* See the file NOTICE for conditions of use and distribution. */
/* General functions concerned with transportation, and generic options for all
#include "exim.h"
-#ifdef HAVE_LINUX_SENDFILE
-#include <sys/sendfile.h>
-#endif
-
-/* Structure for keeping list of addresses that have been added to
-Envelope-To:, in order to avoid duplication. */
-
-struct aci {
- struct aci *next;
- address_item *ptr;
- };
-
-
-/* Static data for write_chunk() */
-
-static uschar *chunk_ptr; /* chunk pointer */
-static uschar *nl_check; /* string to look for at line start */
-static int nl_check_length; /* length of same */
-static uschar *nl_escape; /* string to insert */
-static int nl_escape_length; /* length of same */
-static int nl_partial_match; /* length matched at chunk end */
-
-
/* Generic options for transports, all of which live inside transport_instance
data blocks and which therefore have the opt_public flag set. Note that there
are other options living inside this structure which can be set only from
(void *)offsetof(transport_instance, driver_name) },
{ "envelope_to_add", opt_bool|opt_public,
(void *)(offsetof(transport_instance, envelope_to_add)) },
-#ifdef EXPERIMENTAL_EVENT
+#ifndef DISABLE_EVENT
{ "event_action", opt_stringptr | opt_public,
(void *)offsetof(transport_instance, event_action) },
#endif
(void *)offsetof(transport_instance, uid) }
};
-int optionlist_transports_size =
- sizeof(optionlist_transports)/sizeof(optionlist);
+int optionlist_transports_size = nelem(optionlist_transports);
+
+#ifdef MACRO_PREDEF
+
+# include "macro_predef.h"
+
+void
+options_transports(void)
+{
+struct transport_info * ti;
+uschar buf[64];
+
+options_from_list(optionlist_transports, nelem(optionlist_transports), US"TRANSPORTS", NULL);
+
+for (ti = transports_available; ti->driver_name[0]; ti++)
+ {
+ spf(buf, sizeof(buf), US"_DRIVER_TRANSPORT_%T", ti->driver_name);
+ builtin_macro_create(buf);
+ options_from_list(ti->options, (unsigned)*ti->options_count, US"TRANSPORT", ti->driver_name);
+ }
+}
+
+#else /*!MACRO_PREDEF*/
+
+/* Structure for keeping list of addresses that have been added to
+Envelope-To:, in order to avoid duplication. */
+
+struct aci {
+ struct aci *next;
+ address_item *ptr;
+ };
+
+
+/* Static data for write_chunk() */
+
+static uschar *chunk_ptr; /* chunk pointer */
+static uschar *nl_check; /* string to look for at line start */
+static int nl_check_length; /* length of same */
+static uschar *nl_escape; /* string to insert */
+static int nl_escape_length; /* length of same */
+static int nl_partial_match; /* length matched at chunk end */
/*************************************************
/* Now scan the configured transports and check inconsistencies. A shadow
transport is permitted only for local transports. */
-for (t = transports; t != NULL; t = t->next)
+for (t = transports; t; t = t->next)
{
- if (!t->info->local)
- {
- if (t->shadow != NULL)
- log_write(0, LOG_PANIC_DIE|LOG_CONFIG,
- "shadow transport not allowed on non-local transport %s", t->name);
- }
+ if (!t->info->local && t->shadow)
+ log_write(0, LOG_PANIC_DIE|LOG_CONFIG,
+ "shadow transport not allowed on non-local transport %s", t->name);
if (t->body_only && t->headers_only)
log_write(0, LOG_PANIC_DIE|LOG_CONFIG,
longstop.
Arguments:
- fd file descriptor to write to
+ tctx transport context: file descriptor or string to write to
block block of bytes to write
len number of bytes to write
+ more further data expected soon
Returns: TRUE on success, FALSE on failure (with errno preserved);
transport_count is incremented by the number of bytes written
*/
-BOOL
-transport_write_block(int fd, uschar *block, int len)
+static BOOL
+transport_write_block_fd(transport_ctx * tctx, uschar *block, int len, BOOL more)
{
int i, rc, save_errno;
int local_timeout = transport_write_timeout;
+int fd = tctx->u.fd;
/* This loop is for handling incomplete writes and other retries. In most
normal cases, it is only ever executed once. */
for (i = 0; i < 100; i++)
{
DEBUG(D_transport)
- debug_printf("writing data block fd=%d size=%d timeout=%d\n",
- fd, len, local_timeout);
+ debug_printf("writing data block fd=%d size=%d timeout=%d%s\n",
+ fd, len, local_timeout, more ? " (more expected)" : "");
/* This code makes use of alarm() in order to implement the timeout. This
isn't a very tidy way of doing things. Using non-blocking I/O with select()
if (transport_write_timeout <= 0) /* No timeout wanted */
{
- #ifdef SUPPORT_TLS
- if (tls_out.active == fd) rc = tls_write(FALSE, block, len); else
- #endif
- rc = write(fd, block, len);
+ rc =
+#ifdef SUPPORT_TLS
+ tls_out.active == fd ? tls_write(FALSE, block, len, more) :
+#endif
+#ifdef MSG_MORE
+ more ? send(fd, block, len, MSG_MORE) :
+#endif
+ write(fd, block, len);
save_errno = errno;
}
else
{
alarm(local_timeout);
- #ifdef SUPPORT_TLS
- if (tls_out.active == fd) rc = tls_write(FALSE, block, len); else
- #endif
- rc = write(fd, block, len);
+
+ rc =
+#ifdef SUPPORT_TLS
+ tls_out.active == fd ? tls_write(FALSE, block, len, more) :
+#endif
+#ifdef MSG_MORE
+ more ? send(fd, block, len, MSG_MORE) :
+#endif
+ write(fd, block, len);
+
save_errno = errno;
local_timeout = alarm(0);
if (sigalrm_seen)
}
+BOOL
+transport_write_block(transport_ctx * tctx, uschar *block, int len, BOOL more)
+{
+if (!(tctx->options & topt_output_string))
+ return transport_write_block_fd(tctx, block, len, more);
+
+/* Write to expanding-string. NOTE: not NUL-terminated */
+
+if (!tctx->u.msg)
+ {
+ tctx->u.msg = store_get(tctx->msg_size = 1024);
+ tctx->msg_ptr = 0;
+ }
+
+tctx->u.msg = string_catn(tctx->u.msg, &tctx->msg_size, &tctx->msg_ptr, block, len);
+return TRUE;
+}
+
+
/*************************************************
BOOL
transport_write_string(int fd, const char *format, ...)
{
+transport_ctx tctx = {{0}};
va_list ap;
va_start(ap, format);
if (!string_vformat(big_buffer, big_buffer_size, format, ap))
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "overlong formatted string in transport");
va_end(ap);
-return transport_write_block(fd, big_buffer, Ustrlen(big_buffer));
+tctx.u.fd = fd;
+return transport_write_block(&tctx, big_buffer, Ustrlen(big_buffer), FALSE);
}
+void
+transport_write_reset(int options)
+{
+if (!(options & topt_continuation)) chunk_ptr = deliver_out_buffer;
+nl_partial_match = -1;
+nl_check_length = nl_escape_length = 0;
+}
+
+
+
/*************************************************
* Write character chunk *
*************************************************/
chunk was NL, or matched part of the data that has to be escaped.
Arguments:
- fd file descript to write to
+ tctx transport context - processing to be done during output,
+ and file descriptor to write to
chunk pointer to data to write
len length of data to write
- usr_crlf TRUE if CR LF is wanted at the end of each line
In addition, the static nl_xxx variables must be set as required.
Returns: TRUE on success, FALSE on failure (with errno preserved)
*/
-static BOOL
-write_chunk(int fd, uschar *chunk, int len, BOOL use_crlf)
+BOOL
+write_chunk(transport_ctx * tctx, uschar *chunk, int len)
{
uschar *start = chunk;
uschar *end = chunk + len;
-register uschar *ptr;
+uschar *ptr;
int mlen = DELIVER_OUT_BUFFER_SIZE - nl_escape_length - 2;
/* The assumption is made that the check string will never stretch over move
for (ptr = start; ptr < end; ptr++)
{
- register int ch;
+ int ch, len;
/* Flush the buffer if it has reached the threshold - we want to leave enough
room for the next uschar, plus a possible extra CR for an LF, plus the escape
string. */
- if (chunk_ptr - deliver_out_buffer > mlen)
+ if ((len = chunk_ptr - deliver_out_buffer) > mlen)
{
- if (!transport_write_block(fd, deliver_out_buffer,
- chunk_ptr - deliver_out_buffer))
- return FALSE;
+ DEBUG(D_transport) debug_printf("flushing headers buffer\n");
+
+ /* If CHUNKING, prefix with BDAT (size) NON-LAST. Also, reap responses
+ from previous SMTP commands. */
+
+ if (tctx->options & topt_use_bdat && tctx->chunk_cb)
+ {
+ if ( tctx->chunk_cb(tctx, (unsigned)len, 0) != OK
+ || !transport_write_block(tctx, deliver_out_buffer, len, FALSE)
+ || tctx->chunk_cb(tctx, 0, tc_reap_prev) != OK
+ )
+ return FALSE;
+ }
+ else
+ if (!transport_write_block(tctx, deliver_out_buffer, len, FALSE))
+ return FALSE;
chunk_ptr = deliver_out_buffer;
}
+ /* Remove CR before NL if required */
+
+ if ( *ptr == '\r' && ptr[1] == '\n'
+ && !(tctx->options & topt_use_crlf)
+ && spool_file_wireformat
+ )
+ ptr++;
+
if ((ch = *ptr) == '\n')
{
int left = end - ptr - 1; /* count of chars left after NL */
/* Insert CR before NL if required */
- if (use_crlf) *chunk_ptr++ = '\r';
+ if (tctx->options & topt_use_crlf && !spool_file_wireformat)
+ *chunk_ptr++ = '\r';
*chunk_ptr++ = '\n';
transport_newlines++;
pplist address of anchor of the list of addresses not to output
pdlist address of anchor of the list of processed addresses
first TRUE if this is the first address; set it FALSE afterwards
- fd the file descriptor to write to
- use_crlf to be passed on to write_chunk()
+ tctx transport context - processing to be done during output
+ and the file descriptor to write to
Returns: FALSE if writing failed
*/
static BOOL
write_env_to(address_item *p, struct aci **pplist, struct aci **pdlist,
- BOOL *first, int fd, BOOL use_crlf)
+ BOOL *first, transport_ctx * tctx)
{
address_item *pp;
struct aci *ppp;
/* Do nothing if we have already handled this address. If not, remember it
so that we don't handle it again. */
-for (ppp = *pdlist; ppp != NULL; ppp = ppp->next)
- { if (p == ppp->ptr) return TRUE; }
+for (ppp = *pdlist; ppp; ppp = ppp->next) if (p == ppp->ptr) return TRUE;
ppp = store_get(sizeof(struct aci));
ppp->next = *pdlist;
for (pp = p;; pp = pp->parent)
{
address_item *dup;
- for (dup = addr_duplicate; dup != NULL; dup = dup->next)
- {
- if (dup->dupof != pp) continue; /* Not a dup of our address */
- if (!write_env_to(dup, pplist, pdlist, first, fd, use_crlf)) return FALSE;
- }
- if (pp->parent == NULL) break;
+ for (dup = addr_duplicate; dup; dup = dup->next)
+ if (dup->dupof == pp) /* a dup of our address */
+ if (!write_env_to(dup, pplist, pdlist, first, tctx))
+ return FALSE;
+ if (!pp->parent) break;
}
/* Check to see if we have already output the progenitor. */
-for (ppp = *pplist; ppp != NULL; ppp = ppp->next)
- { if (pp == ppp->ptr) break; }
-if (ppp != NULL) return TRUE;
+for (ppp = *pplist; ppp; ppp = ppp->next) if (pp == ppp->ptr) break;
+if (ppp) return TRUE;
/* Remember what we have output, and output it. */
*pplist = ppp;
ppp->ptr = pp;
-if (!(*first) && !write_chunk(fd, US",\n ", 3, use_crlf)) return FALSE;
+if (!*first && !write_chunk(tctx, US",\n ", 3)) return FALSE;
*first = FALSE;
-return write_chunk(fd, pp->address, Ustrlen(pp->address), use_crlf);
+return write_chunk(tctx, pp->address, Ustrlen(pp->address));
}
-/* Add/remove/rewwrite headers, and send them plus the empty-line sparator.
+/* Add/remove/rewrite headers, and send them plus the empty-line separator.
Globals:
header_list
Arguments:
addr (chain of) addresses (for extra headers), or NULL;
only the first address is used
- fd file descriptor to write the message to
- sendfn function for output
- use_crlf turn NL into CR LF
- rewrite_rules chain of header rewriting rules
- rewrite_existflags flags for the rewriting rules
+ tctx transport context
+ sendfn function for output (transport or verify)
Returns: TRUE on success; FALSE on failure.
*/
BOOL
-transport_headers_send(address_item *addr, int fd, uschar *add_headers, uschar *remove_headers,
- BOOL (*sendfn)(int fd, uschar * s, int len, BOOL use_crlf),
- BOOL use_crlf, rewrite_rule *rewrite_rules, int rewrite_existflags)
+transport_headers_send(transport_ctx * tctx,
+ BOOL (*sendfn)(transport_ctx * tctx, uschar * s, int len))
{
header_line *h;
+const uschar *list;
+transport_instance * tblock = tctx ? tctx->tblock : NULL;
+address_item * addr = tctx ? tctx->addr : NULL;
/* Then the message's headers. Don't write any that are flagged as "old";
that means they were rewritten, or are a record of envelope rewriting, or
separately and squash any empty ones.
Then check addr->prop.remove_headers too, provided that addr is not NULL. */
-for (h = header_list; h != NULL; h = h->next) if (h->type != htype_old)
+for (h = header_list; h; h = h->next) if (h->type != htype_old)
{
int i;
- const uschar *list = remove_headers;
-
BOOL include_header = TRUE;
+ list = tblock ? tblock->remove_headers : NULL;
for (i = 0; i < 2; i++) /* For remove_headers && addr->prop.remove_headers */
{
if (list)
errno = ERRNO_CHHEADER_FAIL;
return FALSE;
}
- len = Ustrlen(s);
+ len = s ? Ustrlen(s) : 0;
if (strncmpic(h->text, s, len) != 0) continue;
ss = h->text + len;
while (*ss == ' ' || *ss == '\t') ss++;
if (*ss == ':') break;
}
- if (s != NULL) { include_header = FALSE; break; }
+ if (s) { include_header = FALSE; break; }
}
- if (addr != NULL) list = addr->prop.remove_headers;
+ if (addr) list = addr->prop.remove_headers;
}
/* If this header is to be output, try to rewrite it if there are rewriting
if (include_header)
{
- if (rewrite_rules)
+ if (tblock && tblock->rewrite_rules)
{
void *reset_point = store_get(0);
header_line *hh;
- if ((hh = rewrite_header(h, NULL, NULL, rewrite_rules, rewrite_existflags, FALSE)))
+ if ((hh = rewrite_header(h, NULL, NULL, tblock->rewrite_rules,
+ tblock->rewrite_existflags, FALSE)))
{
- if (!sendfn(fd, hh->text, hh->slen, use_crlf)) return FALSE;
+ if (!sendfn(tctx, hh->text, hh->slen)) return FALSE;
store_reset(reset_point);
continue; /* With the next header line */
}
/* Either no rewriting rules, or it didn't get rewritten */
- if (!sendfn(fd, h->text, h->slen, use_crlf)) return FALSE;
+ if (!sendfn(tctx, h->text, h->slen)) return FALSE;
}
/* Header removed */
else
- {
DEBUG(D_transport) debug_printf("removed header line:\n%s---\n", h->text);
- }
}
/* Add on any address-specific headers. If there are multiple addresses,
header_line *hprev = addr->prop.extra_headers;
header_line *hnext;
for (i = 0; i < 2; i++)
- {
- for (h = hprev, hprev = NULL; h != NULL; h = hnext)
+ for (h = hprev, hprev = NULL; h; h = hnext)
{
hnext = h->next;
h->next = hprev;
hprev = h;
if (i == 1)
{
- if (!sendfn(fd, h->text, h->slen, use_crlf)) return FALSE;
+ if (!sendfn(tctx, h->text, h->slen)) return FALSE;
DEBUG(D_transport)
debug_printf("added header line(s):\n%s---\n", h->text);
}
}
- }
}
/* If a string containing additional headers exists it is a newline-sep
noops. An added header string from a transport may not end with a newline;
add one if it does not. */
-if (add_headers)
+if (tblock && (list = CUS tblock->add_headers))
{
int sep = '\n';
uschar * s;
- while ((s = string_nextinlist(CUSS &add_headers, &sep, NULL, 0)))
- if (!(s = expand_string(s)))
- {
- if (!expand_string_forcedfail)
- { errno = ERRNO_CHHEADER_FAIL; return FALSE; }
- }
- else
+ while ((s = string_nextinlist(&list, &sep, NULL, 0)))
+ if ((s = expand_string(s)))
{
int len = Ustrlen(s);
if (len > 0)
{
- if (!sendfn(fd, s, len, use_crlf)) return FALSE;
- if (s[len-1] != '\n' && !sendfn(fd, US"\n", 1, use_crlf))
+ if (!sendfn(tctx, s, len)) return FALSE;
+ if (s[len-1] != '\n' && !sendfn(tctx, US"\n", 1))
return FALSE;
DEBUG(D_transport)
{
}
}
}
+ else if (!expand_string_forcedfail)
+ { errno = ERRNO_CHHEADER_FAIL; return FALSE; }
}
/* Separate headers from body with a blank line */
-return sendfn(fd, US"\n", 1, use_crlf);
+return sendfn(tctx, US"\n", 1);
}
transport_write_timeout non-zero.
Arguments:
- addr (chain of) addresses (for extra headers), or NULL;
+ tctx
+ (fd, msg) Either and fd, to write the message to,
+ or a string: if null write message to allocated space
+ otherwire take content as headers.
+ addr (chain of) addresses (for extra headers), or NULL;
only the first address is used
- fd file descriptor to write the message to
- options bit-wise options:
- add_return_path if TRUE, add a "return-path" header
- add_envelope_to if TRUE, add a "envelope-to" header
- add_delivery_date if TRUE, add a "delivery-date" header
- use_crlf if TRUE, turn NL into CR LF
- end_dot if TRUE, send a terminating "." line at the end
- no_headers if TRUE, omit the headers
- no_body if TRUE, omit the body
- size_limit if > 0, this is a limit to the size of message written;
- it is used when returning messages to their senders,
- and is approximate rather than exact, owing to chunk
- buffering
- add_headers a string containing one or more headers to add; it is
- expanded, and must be in correct RFC 822 format as
- it is transmitted verbatim; NULL => no additions,
- and so does empty string or forced expansion fail
- remove_headers a colon-separated list of headers to remove, or NULL
- check_string a string to check for at the start of lines, or NULL
- escape_string a string to insert in front of any check string
- rewrite_rules chain of header rewriting rules
- rewrite_existflags flags for the rewriting rules
+ tblock optional transport instance block (NULL signifies NULL/0):
+ add_headers a string containing one or more headers to add; it is
+ expanded, and must be in correct RFC 822 format as
+ it is transmitted verbatim; NULL => no additions,
+ and so does empty string or forced expansion fail
+ remove_headers a colon-separated list of headers to remove, or NULL
+ rewrite_rules chain of header rewriting rules
+ rewrite_existflags flags for the rewriting rules
+ options bit-wise options:
+ add_return_path if TRUE, add a "return-path" header
+ add_envelope_to if TRUE, add a "envelope-to" header
+ add_delivery_date if TRUE, add a "delivery-date" header
+ use_crlf if TRUE, turn NL into CR LF
+ end_dot if TRUE, send a terminating "." line at the end
+ no_headers if TRUE, omit the headers
+ no_body if TRUE, omit the body
+ check_string a string to check for at the start of lines, or NULL
+ escape_string a string to insert in front of any check string
+ size_limit if > 0, this is a limit to the size of message written;
+ it is used when returning messages to their senders,
+ and is approximate rather than exact, owing to chunk
+ buffering
Returns: TRUE on success; FALSE (with errno) on failure.
In addition, the global variable transport_count
*/
static BOOL
-internal_transport_write_message(address_item *addr, int fd, int options,
- int size_limit, uschar *add_headers, uschar *remove_headers, uschar *check_string,
- uschar *escape_string, rewrite_rule *rewrite_rules, int rewrite_existflags)
+internal_transport_write_message(transport_ctx * tctx, int size_limit)
{
-int written = 0;
-int len;
-BOOL use_crlf = (options & topt_use_crlf) != 0;
+int len, size = 0;
/* Initialize pointer in output buffer. */
-chunk_ptr = deliver_out_buffer;
+transport_write_reset(tctx->options);
/* Set up the data for start-of-line data checking and escaping */
-nl_partial_match = -1;
-if (check_string != NULL && escape_string != NULL)
+if (tctx->check_string && tctx->escape_string)
{
- nl_check = check_string;
+ nl_check = tctx->check_string;
nl_check_length = Ustrlen(nl_check);
- nl_escape = escape_string;
+ nl_escape = tctx->escape_string;
nl_escape_length = Ustrlen(nl_escape);
}
-else nl_check_length = nl_escape_length = 0;
/* Whether the escaping mechanism is applied to headers or not is controlled by
an option (set for SMTP, not otherwise). Negate the length if not wanted till
after the headers. */
-if ((options & topt_escape_headers) == 0) nl_check_length = -nl_check_length;
+if (!(tctx->options & topt_escape_headers))
+ nl_check_length = -nl_check_length;
/* Write the headers if required, including any that have to be added. If there
-are header rewriting rules, apply them. */
+are header rewriting rules, apply them. The datasource is not the -D spoolfile
+so temporarily hide the global that adjusts for its format. */
-if ((options & topt_no_headers) == 0)
+if (!(tctx->options & topt_no_headers))
{
+ BOOL save_wireformat = spool_file_wireformat;
+ spool_file_wireformat = FALSE;
+
/* Add return-path: if requested. */
- if ((options & topt_add_return_path) != 0)
+ if (tctx->options & topt_add_return_path)
{
uschar buffer[ADDRESS_MAXLENGTH + 20];
- sprintf(CS buffer, "Return-path: <%.*s>\n", ADDRESS_MAXLENGTH,
+ int n = sprintf(CS buffer, "Return-path: <%.*s>\n", ADDRESS_MAXLENGTH,
return_path);
- if (!write_chunk(fd, buffer, Ustrlen(buffer), use_crlf)) return FALSE;
+ if (!write_chunk(tctx, buffer, n)) goto bad;
}
/* Add envelope-to: if requested */
- if ((options & topt_add_envelope_to) != 0)
+ if (tctx->options & topt_add_envelope_to)
{
BOOL first = TRUE;
address_item *p;
struct aci *dlist = NULL;
void *reset_point = store_get(0);
- if (!write_chunk(fd, US"Envelope-to: ", 13, use_crlf)) return FALSE;
+ if (!write_chunk(tctx, US"Envelope-to: ", 13)) goto bad;
/* Pick up from all the addresses. The plist and dlist variables are
anchors for lists of addresses already handled; they have to be defined at
- this level becuase write_env_to() calls itself recursively. */
+ this level because write_env_to() calls itself recursively. */
- for (p = addr; p != NULL; p = p->next)
- {
- if (!write_env_to(p, &plist, &dlist, &first, fd, use_crlf)) return FALSE;
- }
+ for (p = tctx->addr; p; p = p->next)
+ if (!write_env_to(p, &plist, &dlist, &first, tctx)) goto bad;
/* Add a final newline and reset the store used for tracking duplicates */
- if (!write_chunk(fd, US"\n", 1, use_crlf)) return FALSE;
+ if (!write_chunk(tctx, US"\n", 1)) goto bad;
store_reset(reset_point);
}
/* Add delivery-date: if requested. */
- if ((options & topt_add_delivery_date) != 0)
+ if (tctx->options & topt_add_delivery_date)
{
- uschar buffer[100];
- sprintf(CS buffer, "Delivery-date: %s\n", tod_stamp(tod_full));
- if (!write_chunk(fd, buffer, Ustrlen(buffer), use_crlf)) return FALSE;
+ uschar * s = tod_stamp(tod_full);
+
+ if ( !write_chunk(tctx, US"Delivery-date: ", 15)
+ || !write_chunk(tctx, s, Ustrlen(s))
+ || !write_chunk(tctx, US"\n", 1)) goto bad;
}
/* Then the message's headers. Don't write any that are flagged as "old";
were removed (e.g. Bcc). If remove_headers is not null, skip any headers that
match any entries therein. Then check addr->prop.remove_headers too, provided that
addr is not NULL. */
- if (!transport_headers_send(addr, fd, add_headers, remove_headers, &write_chunk,
- use_crlf, rewrite_rules, rewrite_existflags))
- return FALSE;
- }
-
-/* If the body is required, ensure that the data for check strings (formerly
-the "from hack") is enabled by negating the length if necessary. (It will be
-negative in cases where it isn't to apply to the headers). Then ensure the body
-is positioned at the start of its file (following the message id), then write
-it, applying the size limit if required. */
-if ((options & topt_no_body) == 0)
- {
- nl_check_length = abs(nl_check_length);
- nl_partial_match = 0;
- lseek(deliver_datafile, SPOOL_DATA_START_OFFSET, SEEK_SET);
- while ((len = read(deliver_datafile, deliver_in_buffer,
- DELIVER_IN_BUFFER_SIZE)) > 0)
+ if (!transport_headers_send(tctx, &write_chunk))
{
- if (!write_chunk(fd, deliver_in_buffer, len, use_crlf)) return FALSE;
- if (size_limit > 0)
- {
- written += len;
- if (written > size_limit)
- {
- len = 0; /* Pretend EOF */
- break;
- }
- }
+bad:
+ spool_file_wireformat = save_wireformat;
+ return FALSE;
}
- /* A read error on the body will have left len == -1 and errno set. */
-
- if (len != 0) return FALSE;
+ spool_file_wireformat = save_wireformat;
}
-/* Finished with the check string */
-
-nl_check_length = nl_escape_length = 0;
-
-/* If requested, add a terminating "." line (SMTP output). */
-
-if ((options & topt_end_dot) != 0 && !write_chunk(fd, US".\n", 2, use_crlf))
- return FALSE;
-
-/* Write out any remaining data in the buffer before returning. */
-
-return (len = chunk_ptr - deliver_out_buffer) <= 0 ||
- transport_write_block(fd, deliver_out_buffer, len);
-}
+/* When doing RFC3030 CHUNKING output, work out how much data would be in a
+last-BDAT, consisting of the current write_chunk() output buffer fill
+(optimally, all of the headers - but it does not matter if we already had to
+flush that buffer with non-last BDAT prependix) plus the amount of body data
+(as expanded for CRLF lines). Then create and write BDAT(s), and ensure
+that further use of write_chunk() will not prepend BDATs.
+The first BDAT written will also first flush any outstanding MAIL and RCPT
+commands which were buffered thans to PIPELINING.
+Commands go out (using a send()) from a different buffer to data (using a
+write()). They might not end up in the same TCP segment, which is
+suboptimal. */
+
+if (tctx->options & topt_use_bdat)
+ {
+ off_t fsize;
+ int hsize;
+ if ((hsize = chunk_ptr - deliver_out_buffer) < 0)
+ hsize = 0;
+ if (!(tctx->options & topt_no_body))
+ {
+ if ((fsize = lseek(deliver_datafile, 0, SEEK_END)) < 0) return FALSE;
+ fsize -= SPOOL_DATA_START_OFFSET;
+ if (size_limit > 0 && fsize > size_limit)
+ fsize = size_limit;
+ size = hsize + fsize;
+ if (tctx->options & topt_use_crlf && !spool_file_wireformat)
+ size += body_linecount; /* account for CRLF-expansion */
+
+ /* With topt_use_bdat we never do dot-stuffing; no need to
+ account for any expansion due to that. */
+ }
-#ifndef DISABLE_DKIM
+ /* If the message is large, emit first a non-LAST chunk with just the
+ headers, and reap the command responses. This lets us error out early
+ on RCPT rejects rather than sending megabytes of data. Include headers
+ on the assumption they are cheap enough and some clever implementations
+ might errorcheck them too, on-the-fly, and reject that chunk. */
-/***************************************************************************************************
-* External interface to write the message, while signing it with DKIM and/or Domainkeys *
-***************************************************************************************************/
+ if (size > DELIVER_OUT_BUFFER_SIZE && hsize > 0)
+ {
+ DEBUG(D_transport)
+ debug_printf("sending small initial BDAT; hsize=%d\n", hsize);
+ if ( tctx->chunk_cb(tctx, hsize, 0) != OK
+ || !transport_write_block(tctx, deliver_out_buffer, hsize, FALSE)
+ || tctx->chunk_cb(tctx, 0, tc_reap_prev) != OK
+ )
+ return FALSE;
+ chunk_ptr = deliver_out_buffer;
+ size -= hsize;
+ }
-/* This function is a wrapper around transport_write_message().
- It is only called from the smtp transport if DKIM or Domainkeys support
- is compiled in. The function sets up a replacement fd into a -K file,
- then calls the normal function. This way, the exact bits that exim would
- have put "on the wire" will end up in the file (except for TLS
- encapsulation, which is the very very last thing). When we are done
- signing the file, send the signed message down the original fd (or TLS fd).
+ /* Emit a LAST datachunk command, and unmark the context for further
+ BDAT commands. */
-Arguments:
- as for internal_transport_write_message() above, with additional arguments:
- uschar *dkim_private_key DKIM: The private key to use (filename or
- plain data)
- uschar *dkim_domain DKIM: The domain to use
- uschar *dkim_selector DKIM: The selector to use.
- uschar *dkim_canon DKIM: The canonalization scheme to use,
- "simple" or "relaxed"
- uschar *dkim_strict DKIM: What to do if signing fails:
- 1/true => throw error
- 0/false => send anyway
- uschar *dkim_sign_headers DKIM: List of headers that should be included
- in signature generation
+ if (tctx->chunk_cb(tctx, size, tc_chunk_last) != OK)
+ return FALSE;
+ tctx->options &= ~topt_use_bdat;
+ }
-Returns: TRUE on success; FALSE (with errno) for any failure
-*/
+/* If the body is required, ensure that the data for check strings (formerly
+the "from hack") is enabled by negating the length if necessary. (It will be
+negative in cases where it isn't to apply to the headers). Then ensure the body
+is positioned at the start of its file (following the message id), then write
+it, applying the size limit if required. */
-BOOL
-dkim_transport_write_message(address_item *addr, int fd, int options,
- int size_limit, uschar *add_headers, uschar *remove_headers,
- uschar *check_string, uschar *escape_string, rewrite_rule *rewrite_rules,
- int rewrite_existflags, uschar *dkim_private_key, uschar *dkim_domain,
- uschar *dkim_selector, uschar *dkim_canon, uschar *dkim_strict, uschar *dkim_sign_headers
- )
-{
-int dkim_fd;
-int save_errno = 0;
-BOOL rc;
-uschar dkim_spool_name[256];
-char sbuf[2048];
-int sread = 0;
-int wwritten = 0;
-uschar *dkim_signature = NULL;
-
-/* If we can't sign, just call the original function. */
-
-if (!(dkim_private_key && dkim_domain && dkim_selector))
- return transport_write_message(addr, fd, options,
- size_limit, add_headers, remove_headers,
- check_string, escape_string, rewrite_rules,
- rewrite_existflags);
-
-(void)string_format(dkim_spool_name, 256, "%s/input/%s/%s-%d-K",
- spool_directory, message_subdir, message_id, (int)getpid());
-
-if ((dkim_fd = Uopen(dkim_spool_name, O_RDWR|O_CREAT|O_TRUNC, SPOOL_MODE)) < 0)
+/* If we have a wireformat -D file (CRNL lines, non-dotstuffed, no ending dot)
+and we want to send a body without dotstuffing or ending-dot, in-clear,
+then we can just dump it using sendfile.
+This should get used for CHUNKING output and also for writing the -K file for
+dkim signing, when we had CHUNKING input. */
+
+#ifdef OS_SENDFILE
+if ( spool_file_wireformat
+ && !(tctx->options & (topt_no_body | topt_end_dot))
+ && !nl_check_length
+ && tls_out.active != tctx->u.fd
+ )
{
- /* Can't create spool file. Ugh. */
- rc = FALSE;
- save_errno = errno;
- goto CLEANUP;
- }
+ ssize_t copied = 0;
+ off_t offset = SPOOL_DATA_START_OFFSET;
-/* Call original function to write the -K file */
+ /* Write out any header data in the buffer */
-rc = transport_write_message(addr, dkim_fd, options,
- size_limit, add_headers, remove_headers,
- check_string, escape_string, rewrite_rules,
- rewrite_existflags);
+ if ((len = chunk_ptr - deliver_out_buffer) > 0)
+ {
+ if (!transport_write_block(tctx, deliver_out_buffer, len, TRUE))
+ return FALSE;
+ size -= len;
+ }
-/* Save error state. We must clean up before returning. */
-if (!rc)
- {
- save_errno = errno;
- goto CLEANUP;
- }
+ DEBUG(D_transport) debug_printf("using sendfile for body\n");
-if (dkim_private_key && dkim_domain && dkim_selector)
- {
- /* Rewind file and feed it to the goats^W DKIM lib */
- lseek(dkim_fd, 0, SEEK_SET);
- dkim_signature = dkim_exim_sign(dkim_fd,
- dkim_private_key,
- dkim_domain,
- dkim_selector,
- dkim_canon,
- dkim_sign_headers);
- if (!dkim_signature)
+ while(size > 0)
{
- if (dkim_strict)
- {
- uschar *dkim_strict_result = expand_string(dkim_strict);
- if (dkim_strict_result)
- if ( (strcmpic(dkim_strict,US"1") == 0) ||
- (strcmpic(dkim_strict,US"true") == 0) )
- {
- /* Set errno to something halfway meaningful */
- save_errno = EACCES;
- log_write(0, LOG_MAIN, "DKIM: message could not be signed,"
- " and dkim_strict is set. Deferring message delivery.");
- rc = FALSE;
- goto CLEANUP;
- }
- }
+ if ((copied = os_sendfile(tctx->u.fd, deliver_datafile, &offset, size)) <= 0) break;
+ size -= copied;
}
- else
- {
- int siglen = Ustrlen(dkim_signature);
- while(siglen > 0)
- {
-#ifdef SUPPORT_TLS
- wwritten = tls_out.active == fd
- ? tls_write(FALSE, dkim_signature, siglen)
- : write(fd, dkim_signature, siglen);
+ return copied >= 0;
+ }
#else
- wwritten = write(fd, dkim_signature, siglen);
+DEBUG(D_transport) debug_printf("cannot use sendfile for body: no support\n");
#endif
- if (wwritten == -1)
- {
- /* error, bail out */
- save_errno = errno;
- rc = FALSE;
- goto CLEANUP;
- }
- siglen -= wwritten;
- dkim_signature += wwritten;
- }
- }
- }
-#ifdef HAVE_LINUX_SENDFILE
-/* We can use sendfile() to shove the file contents
- to the socket. However only if we don't use TLS,
- as then there's another layer of indirection
- before the data finally hits the socket. */
-if (tls_out.active != fd)
+DEBUG(D_transport)
+ if (!(tctx->options & topt_no_body))
+ debug_printf("cannot use sendfile for body: %s\n",
+ !spool_file_wireformat ? "spoolfile not wireformat"
+ : tctx->options & topt_end_dot ? "terminating dot wanted"
+ : nl_check_length ? "dot- or From-stuffing wanted"
+ : "TLS output wanted");
+
+if (!(tctx->options & topt_no_body))
{
- off_t size = lseek(dkim_fd, 0, SEEK_END); /* Fetch file size */
- ssize_t copied = 0;
- off_t offset = 0;
-
- /* Rewind file */
- lseek(dkim_fd, 0, SEEK_SET);
+ int size = size_limit;
- while(copied >= 0 && offset < size)
- copied = sendfile(fd, dkim_fd, &offset, size - offset);
- if (copied < 0)
+ nl_check_length = abs(nl_check_length);
+ nl_partial_match = 0;
+ if (lseek(deliver_datafile, SPOOL_DATA_START_OFFSET, SEEK_SET) < 0)
+ return FALSE;
+ while ( (len = MAX(DELIVER_IN_BUFFER_SIZE, size)) > 0
+ && (len = read(deliver_datafile, deliver_in_buffer, len)) > 0)
{
- save_errno = errno;
- rc = FALSE;
+ if (!write_chunk(tctx, deliver_in_buffer, len))
+ return FALSE;
+ size -= len;
}
+
+ /* A read error on the body will have left len == -1 and errno set. */
+
+ if (len != 0) return FALSE;
}
-else
-#endif
+/* Finished with the check string */
- {
- /* Rewind file */
- lseek(dkim_fd, 0, SEEK_SET);
+nl_check_length = nl_escape_length = 0;
- /* Send file down the original fd */
- while((sread = read(dkim_fd, sbuf, 2048)) > 0)
- {
- char *p = sbuf;
- /* write the chunk */
+/* If requested, add a terminating "." line (SMTP output). */
- while (sread)
- {
-#ifdef SUPPORT_TLS
- wwritten = tls_out.active == fd
- ? tls_write(FALSE, US p, sread)
- : write(fd, p, sread);
-#else
- wwritten = write(fd, p, sread);
-#endif
- if (wwritten == -1)
- {
- /* error, bail out */
- save_errno = errno;
- rc = FALSE;
- goto CLEANUP;
- }
- p += wwritten;
- sread -= wwritten;
- }
- }
+if (tctx->options & topt_end_dot && !write_chunk(tctx, US".\n", 2))
+ return FALSE;
- if (sread == -1)
- {
- save_errno = errno;
- rc = FALSE;
- }
- }
+/* Write out any remaining data in the buffer before returning. */
-CLEANUP:
-/* unlink -K file */
-(void)close(dkim_fd);
-Uunlink(dkim_spool_name);
-errno = save_errno;
-return rc;
+return (len = chunk_ptr - deliver_out_buffer) <= 0 ||
+ transport_write_block(tctx, deliver_out_buffer, len, FALSE);
}
-#endif
the real work, passing over all the arguments from this function. Otherwise,
set up a filtering process, fork another process to call the internal function
to write to the filter, and in this process just suck from the filter and write
-down the given fd. At the end, tidy up the pipes and the processes.
+down the fd in the transport context. At the end, tidy up the pipes and the
+processes.
Arguments: as for internal_transport_write_message() above
*/
BOOL
-transport_write_message(address_item *addr, int fd, int options,
- int size_limit, uschar *add_headers, uschar *remove_headers,
- uschar *check_string, uschar *escape_string, rewrite_rule *rewrite_rules,
- int rewrite_existflags)
+transport_write_message(transport_ctx * tctx, int size_limit)
{
-BOOL use_crlf;
BOOL last_filter_was_NL = TRUE;
+BOOL save_spool_file_wireformat = spool_file_wireformat;
int rc, len, yield, fd_read, fd_write, save_errno;
-int pfd[2];
+int pfd[2] = {-1, -1};
pid_t filter_pid, write_pid;
transport_filter_timed_out = FALSE;
/* If there is no filter command set up, call the internal function that does
the actual work, passing it the incoming fd, and return its result. */
-if (transport_filter_argv == NULL)
- return internal_transport_write_message(addr, fd, options, size_limit,
- add_headers, remove_headers, check_string, escape_string,
- rewrite_rules, rewrite_existflags);
+if ( !transport_filter_argv
+ || !*transport_filter_argv
+ || !**transport_filter_argv
+ )
+ return internal_transport_write_message(tctx, size_limit);
/* Otherwise the message must be written to a filter process and read back
before being written to the incoming fd. First set up the special processing to
be done during the copying. */
-use_crlf = (options & topt_use_crlf) != 0;
nl_partial_match = -1;
-if (check_string != NULL && escape_string != NULL)
+if (tctx->check_string && tctx->escape_string)
{
- nl_check = check_string;
+ nl_check = tctx->check_string;
nl_check_length = Ustrlen(nl_check);
- nl_escape = escape_string;
+ nl_escape = tctx->escape_string;
nl_escape_length = Ustrlen(nl_escape);
}
else nl_check_length = nl_escape_length = 0;
yield = FALSE;
write_pid = (pid_t)(-1);
-(void)fcntl(fd, F_SETFD, fcntl(fd, F_GETFD) | FD_CLOEXEC);
-filter_pid = child_open(USS transport_filter_argv, NULL, 077,
- &fd_write, &fd_read, FALSE);
-(void)fcntl(fd, F_SETFD, fcntl(fd, F_GETFD) & ~FD_CLOEXEC);
+ {
+ int bits = fcntl(tctx->u.fd, F_GETFD);
+ (void)fcntl(tctx->u.fd, F_SETFD, bits | FD_CLOEXEC);
+ filter_pid = child_open(USS transport_filter_argv, NULL, 077,
+ &fd_write, &fd_read, FALSE);
+ (void)fcntl(tctx->u.fd, F_SETFD, bits & ~FD_CLOEXEC);
+ }
if (filter_pid < 0) goto TIDY_UP; /* errno set */
DEBUG(D_transport)
- debug_printf("process %d running as transport filter: write=%d read=%d\n",
+ debug_printf("process %d running as transport filter: fd_write=%d fd_read=%d\n",
(int)filter_pid, fd_write, fd_read);
/* Fork subprocess to write the message to the filter, and return the result
(void)close(fd_read);
(void)close(pfd[pipe_read]);
nl_check_length = nl_escape_length = 0;
- rc = internal_transport_write_message(addr, fd_write,
- (options & ~(topt_use_crlf | topt_end_dot)),
- size_limit, add_headers, remove_headers, NULL, NULL,
- rewrite_rules, rewrite_existflags);
+
+ tctx->u.fd = fd_write;
+ tctx->check_string = tctx->escape_string = NULL;
+ tctx->options &= ~(topt_use_crlf | topt_end_dot | topt_use_bdat);
+
+ rc = internal_transport_write_message(tctx, size_limit);
+
save_errno = errno;
if ( write(pfd[pipe_write], (void *)&rc, sizeof(BOOL))
!= sizeof(BOOL)
|| write(pfd[pipe_write], (void *)&save_errno, sizeof(int))
!= sizeof(int)
- || write(pfd[pipe_write], (void *)&(addr->more_errno), sizeof(int))
+ || write(pfd[pipe_write], (void *)&tctx->addr->more_errno, sizeof(int))
+ != sizeof(int)
+ || write(pfd[pipe_write], (void *)&tctx->addr->delivery_usec, sizeof(int))
!= sizeof(int)
)
rc = FALSE; /* compiler quietening */
/* Copy the output of the filter, remembering if the last character was NL. If
no data is returned, that counts as "ended with NL" (default setting of the
-variable is TRUE). */
+variable is TRUE). The output should always be unix-format as we converted
+any wireformat source on writing input to the filter. */
+spool_file_wireformat = FALSE;
chunk_ptr = deliver_out_buffer;
for (;;)
if (len > 0)
{
- if (!write_chunk(fd, deliver_in_buffer, len, use_crlf)) goto TIDY_UP;
+ if (!write_chunk(tctx, deliver_in_buffer, len)) goto TIDY_UP;
last_filter_was_NL = (deliver_in_buffer[len-1] == '\n');
}
sure. Also apply a paranoia timeout. */
TIDY_UP:
+spool_file_wireformat = save_spool_file_wireformat;
save_errno = errno;
(void)close(fd_read);
{
yield = FALSE;
save_errno = ERRNO_FILTER_FAIL;
- addr->more_errno = rc;
+ tctx->addr->more_errno = rc;
DEBUG(D_transport) debug_printf("filter process returned %d\n", rc);
}
{
rc = child_close(write_pid, 30);
if (yield)
- {
if (rc == 0)
{
BOOL ok;
- int dummy = read(pfd[pipe_read], (void *)&ok, sizeof(BOOL));
- if (!ok)
+ if (read(pfd[pipe_read], (void *)&ok, sizeof(BOOL)) != sizeof(BOOL))
+ {
+ DEBUG(D_transport)
+ debug_printf("pipe read from writing process: %s\n", strerror(errno));
+ save_errno = ERRNO_FILTER_FAIL;
+ yield = FALSE;
+ }
+ else if (!ok)
{
- dummy = read(pfd[pipe_read], (void *)&save_errno, sizeof(int));
- dummy = read(pfd[pipe_read], (void *)&(addr->more_errno), sizeof(int));
+ int dummy = read(pfd[pipe_read], (void *)&save_errno, sizeof(int));
+ dummy = read(pfd[pipe_read], (void *)&tctx->addr->more_errno, sizeof(int));
+ dummy = read(pfd[pipe_read], (void *)&tctx->addr->delivery_usec, sizeof(int));
+ dummy = dummy; /* compiler quietening */
yield = FALSE;
}
}
{
yield = FALSE;
save_errno = ERRNO_FILTER_FAIL;
- addr->more_errno = rc;
+ tctx->addr->more_errno = rc;
DEBUG(D_transport) debug_printf("writing process returned %d\n", rc);
}
- }
}
(void)close(pfd[pipe_read]);
if (yield)
{
nl_check_length = nl_escape_length = 0;
- if ((options & topt_end_dot) != 0 && (last_filter_was_NL?
- !write_chunk(fd, US".\n", 2, use_crlf) :
- !write_chunk(fd, US"\n.\n", 3, use_crlf)))
- {
+ if ( tctx->options & topt_end_dot
+ && ( last_filter_was_NL
+ ? !write_chunk(tctx, US".\n", 2)
+ : !write_chunk(tctx, US"\n.\n", 3)
+ ) )
yield = FALSE;
- }
/* Write out any remaining data in the buffer. */
else
- {
- yield = (len = chunk_ptr - deliver_out_buffer) <= 0 ||
- transport_write_block(fd, deliver_out_buffer, len);
- }
+ yield = (len = chunk_ptr - deliver_out_buffer) <= 0
+ || transport_write_block(tctx, deliver_out_buffer, len, FALSE);
}
-else errno = save_errno; /* From some earlier error */
+else
+ errno = save_errno; /* From some earlier error */
DEBUG(D_transport)
{
debug_printf("end of filtering transport writing: yield=%d\n", yield);
if (!yield)
- debug_printf("errno=%d more_errno=%d\n", errno, addr->more_errno);
+ debug_printf("errno=%d more_errno=%d\n", errno, tctx->addr->more_errno);
}
return yield;
void
transport_update_waiting(host_item *hostlist, uschar *tpname)
{
-uschar buffer[256];
const uschar *prevname = US"";
host_item *host;
open_db dbblock;
/* Open the database for this transport */
-sprintf(CS buffer, "wait-%.200s", tpname);
-dbm_file = dbfn_open(buffer, O_RDWR, &dbblock, TRUE);
-if (dbm_file == NULL) return;
+if (!(dbm_file = dbfn_open(string_sprintf("wait-%.200s", tpname),
+ O_RDWR, &dbblock, TRUE)))
+ return;
/* Scan the list of hosts for which this message is waiting, and ensure
that the message id is in each host record. */
-for (host = hostlist; host!= NULL; host = host->next)
+for (host = hostlist; host; host = host->next)
{
BOOL already = FALSE;
dbdata_wait *host_record;
uschar *s;
int i, host_length;
+ uschar buffer[256];
/* Skip if this is the same host as we just processed; otherwise remember
the name for next time. */
/* Look up the host record; if there isn't one, make an empty one. */
- host_record = dbfn_read(dbm_file, host->name);
- if (host_record == NULL)
+ if (!(host_record = dbfn_read(dbm_file, host->name)))
{
host_record = store_get(sizeof(dbdata_wait) + MESSAGE_ID_LENGTH);
host_record->count = host_record->sequence = 0;
for (s = host_record->text; s < host_record->text + host_length;
s += MESSAGE_ID_LENGTH)
- {
if (Ustrncmp(s, message_id, MESSAGE_ID_LENGTH) == 0)
{ already = TRUE; break; }
- }
/* If we haven't found this message in the main record, search any
continuation records that exist. */
{
dbdata_wait *cont;
sprintf(CS buffer, "%.200s:%d", host->name, i);
- cont = dbfn_read(dbm_file, buffer);
- if (cont != NULL)
+ if ((cont = dbfn_read(dbm_file, buffer)))
{
int clen = cont->count * MESSAGE_ID_LENGTH;
for (s = cont->text; s < cont->text + clen; s += MESSAGE_ID_LENGTH)
- {
if (Ustrncmp(s, message_id, MESSAGE_ID_LENGTH) == 0)
{ already = TRUE; break; }
- }
}
}
int host_length;
open_db dbblock;
open_db *dbm_file;
-uschar buffer[256];
-msgq_t *msgq = NULL;
-int msgq_count = 0;
-int msgq_actual = 0;
int i;
-BOOL bFound = FALSE;
-uschar spool_dir [PATH_MAX];
-uschar spool_file [PATH_MAX];
struct stat statbuf;
-BOOL bContinuation = FALSE;
*more = FALSE;
/* Open the waiting information database. */
-sprintf(CS buffer, "wait-%.200s", transport_name);
-dbm_file = dbfn_open(buffer, O_RDWR, &dbblock, TRUE);
-if (dbm_file == NULL) return FALSE;
+if (!(dbm_file = dbfn_open(string_sprintf("wait-%.200s", transport_name),
+ O_RDWR, &dbblock, TRUE)))
+ return FALSE;
/* See if there is a record for this host; if not, there's nothing to do. */
-host_record = dbfn_read(dbm_file, hostname);
-if (host_record == NULL)
+if (!(host_record = dbfn_read(dbm_file, hostname)))
{
dbfn_close(dbm_file);
DEBUG(D_transport) debug_printf("no messages waiting for %s\n", hostname);
but the 1 off will remain without it. This code now allows me to SKIP over
a message I do not want to send out on this run. */
-sprintf(CS spool_dir, "%s/input/", spool_directory);
-
host_length = host_record->count * MESSAGE_ID_LENGTH;
while (1)
{
+ msgq_t *msgq;
+ int msgq_count = 0;
+ int msgq_actual = 0;
+ BOOL bFound = FALSE;
+ BOOL bContinuation = FALSE;
+
/* create an array to read entire message queue into memory for processing */
- msgq = (msgq_t*) malloc(sizeof(msgq_t) * host_record->count);
+ msgq = store_malloc(sizeof(msgq_t) * host_record->count);
msgq_count = host_record->count;
msgq_actual = msgq_count;
/* now find the next acceptable message_id */
- bFound = FALSE;
-
for (i = msgq_count - 1; i >= 0; --i) if (msgq[i].bKeep)
{
- if (split_spool_directory)
- sprintf(CS spool_file, "%s%c/%s-D",
- spool_dir, msgq[i].message_id[5], msgq[i].message_id);
- else
- sprintf(CS spool_file, "%s%s-D", spool_dir, msgq[i].message_id);
+ uschar subdir[2];
+
+ subdir[0] = split_spool_directory ? msgq[i].message_id[5] : 0;
+ subdir[1] = 0;
- if (Ustat(spool_file, &statbuf) != 0)
+ if (Ustat(spool_fname(US"input", subdir, msgq[i].message_id, US"-D"),
+ &statbuf) != 0)
msgq[i].bKeep = FALSE;
else if (!oicf_func || oicf_func(msgq[i].message_id, oicf_data))
{
msgq_actual++;
/* reassemble the host record, based on removed message ids, from in
- * memory queue.
- */
+ memory queue */
if (msgq_actual <= 0)
{
}
}
-/* Jeremy: check for a continuation record, this code I do not know how to
-test but the code should work */
-
- bContinuation = FALSE;
+ /* Check for a continuation record. */
while (host_length <= 0)
{
int i;
dbdata_wait * newr = NULL;
+ uschar buffer[256];
/* Search for a continuation */
bContinuation = TRUE;
}
- if (bFound)
+ if (bFound) /* Usual exit from main loop */
+ {
+ store_free (msgq);
break;
+ }
/* If host_length <= 0 we have emptied a record and not found a good message,
and there are no continuation records. Otherwise there is a continuation
if (!bContinuation)
{
- Ustrcpy (new_message_id, message_id);
+ Ustrcpy(new_message_id, message_id);
dbfn_close(dbm_file);
return FALSE;
}
- } /* we need to process a continuation record */
-/* clean up in memory queue */
-if (msgq)
- {
- free (msgq);
- msgq = NULL;
- msgq_count = 0;
- msgq_actual = 0;
- }
+ store_free(msgq);
+ } /* we need to process a continuation record */
/* Control gets here when an existing message has been encountered; its
id is in new_message_id, and host_length is the revised length of the
if (host_length > 0)
{
- uschar msg [MESSAGE_ID_LENGTH + 1];
- int i;
-
host_record->count = host_length/MESSAGE_ID_LENGTH;
- /* rebuild the host_record->text */
-
- for (i = 0; i < host_record->count; ++i)
- {
- Ustrncpy(msg, host_record->text + (i*MESSAGE_ID_LENGTH), MESSAGE_ID_LENGTH);
- msg[MESSAGE_ID_LENGTH] = 0;
- }
-
dbfn_write(dbm_file, hostname, host_record, (int)sizeof(dbdata_wait) + host_length);
*more = TRUE;
}
* Deliver waiting message down same socket *
*************************************************/
+/* Just the regain-root-privilege exec portion */
+void
+transport_do_pass_socket(const uschar *transport_name, const uschar *hostname,
+ const uschar *hostaddress, uschar *id, int socket_fd)
+{
+int i = 20;
+const uschar **argv;
+
+/* Set up the calling arguments; use the standard function for the basics,
+but we have a number of extras that may be added. */
+
+argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, &i, FALSE, 0);
+
+if (smtp_authenticated) argv[i++] = US"-MCA";
+if (smtp_peer_options & OPTION_CHUNKING) argv[i++] = US"-MCK";
+if (smtp_peer_options & OPTION_DSN) argv[i++] = US"-MCD";
+if (smtp_peer_options & OPTION_PIPE) argv[i++] = US"-MCP";
+if (smtp_peer_options & OPTION_SIZE) argv[i++] = US"-MCS";
+#ifdef SUPPORT_TLS
+if (smtp_peer_options & OPTION_TLS)
+ if (tls_out.active >= 0 || continue_proxy_cipher)
+ {
+ argv[i++] = US"-MCt";
+ argv[i++] = sending_ip_address;
+ argv[i++] = string_sprintf("%d", sending_port);
+ argv[i++] = tls_out.active >= 0 ? tls_out.cipher : continue_proxy_cipher;
+ }
+ else
+ argv[i++] = US"-MCT";
+#endif
+
+if (queue_run_pid != (pid_t)0)
+ {
+ argv[i++] = US"-MCQ";
+ argv[i++] = string_sprintf("%d", queue_run_pid);
+ argv[i++] = string_sprintf("%d", queue_run_pipe);
+ }
+
+argv[i++] = US"-MC";
+argv[i++] = US transport_name;
+argv[i++] = US hostname;
+argv[i++] = US hostaddress;
+argv[i++] = string_sprintf("%d", continue_sequence + 1);
+argv[i++] = id;
+argv[i++] = NULL;
+
+/* Arrange for the channel to be on stdin. */
+
+if (socket_fd != 0)
+ {
+ (void)dup2(socket_fd, 0);
+ (void)close(socket_fd);
+ }
+
+DEBUG(D_exec) debug_print_argv(argv);
+exim_nullstd(); /* Ensure std{out,err} exist */
+execv(CS argv[0], (char *const *)argv);
+
+DEBUG(D_any) debug_printf("execv failed: %s\n", strerror(errno));
+_exit(errno); /* Note: must be _exit(), NOT exit() */
+}
+
+
+
/* Fork a new exim process to deliver the message, and do a re-exec, both to
get a clean delivery process, and to regain root privilege in cases where it
has been given away.
if ((pid = fork()) == 0)
{
- int i = 16;
- const uschar **argv;
-
/* Disconnect entirely from the parent process. If we are running in the
test harness, wait for a bit to allow the previous process time to finish,
write the log, etc., so that the output is always in the same order for
automatic comparison. */
- if ((pid = fork()) != 0) _exit(EXIT_SUCCESS);
- if (running_in_test_harness) sleep(1);
-
- /* Set up the calling arguments; use the standard function for the basics,
- but we have a number of extras that may be added. */
-
- argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, &i, FALSE, 0);
-
- /* Call with the dsn flag */
- if (smtp_use_dsn) argv[i++] = US"-MCD";
-
- if (smtp_authenticated) argv[i++] = US"-MCA";
-
- #ifdef SUPPORT_TLS
- if (tls_offered) argv[i++] = US"-MCT";
- #endif
-
- if (smtp_use_size) argv[i++] = US"-MCS";
- if (smtp_use_pipelining) argv[i++] = US"-MCP";
-
- if (queue_run_pid != (pid_t)0)
+ if ((pid = fork()) != 0)
{
- argv[i++] = US"-MCQ";
- argv[i++] = string_sprintf("%d", queue_run_pid);
- argv[i++] = string_sprintf("%d", queue_run_pipe);
+ DEBUG(D_transport) debug_printf("transport_pass_socket succeeded (final-pid %d)\n", pid);
+ _exit(EXIT_SUCCESS);
}
+ if (running_in_test_harness) sleep(1);
- argv[i++] = US"-MC";
- argv[i++] = US transport_name;
- argv[i++] = US hostname;
- argv[i++] = US hostaddress;
- argv[i++] = string_sprintf("%d", continue_sequence + 1);
- argv[i++] = id;
- argv[i++] = NULL;
-
- /* Arrange for the channel to be on stdin. */
-
- if (socket_fd != 0)
- {
- (void)dup2(socket_fd, 0);
- (void)close(socket_fd);
- }
-
- DEBUG(D_exec) debug_print_argv(argv);
- exim_nullstd(); /* Ensure std{out,err} exist */
- execv(CS argv[0], (char *const *)argv);
-
- DEBUG(D_any) debug_printf("execv failed: %s\n", strerror(errno));
- _exit(errno); /* Note: must be _exit(), NOT exit() */
+ transport_do_pass_socket(transport_name, hostname, hostaddress,
+ id, socket_fd);
}
/* If the process creation succeeded, wait for the first-level child, which
{
int rc;
while ((rc = wait(&status)) != pid && (rc >= 0 || errno != ECHILD));
- DEBUG(D_transport) debug_printf("transport_pass_socket succeeded\n");
+ DEBUG(D_transport) debug_printf("transport_pass_socket succeeded (inter-pid %d)\n", pid);
return TRUE;
}
else
*/
if (address_pipe_argcount > 1)
memmove(
- /* current position + additonal args */
+ /* current position + additional args */
argv + i + address_pipe_argcount,
/* current position + 1 (for the (uschar *)0 at the end) */
argv + i + 1,
return TRUE;
}
+#endif /*!MACRO_PREDEF*/
/* vi: aw ai sw=2
*/
/* End of transport.c */
projects / exim.git / blobdiff