* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2014 */
+/* Copyright (c) University of Cambridge 1995 - 2017 */
/* See the file NOTICE for conditions of use and distribution. */
/* Portions Copyright (c) The OpenSSL Project 1999 */
#include <openssl/ssl.h>
#include <openssl/err.h>
#include <openssl/rand.h>
+#ifndef OPENSSL_NO_ECDH
+# include <openssl/ec.h>
+#endif
#ifndef DISABLE_OCSP
# include <openssl/ocsp.h>
#endif
#ifdef EXPERIMENTAL_DANE
-# include <danessl.h>
+# include "danessl.h"
#endif
#if OPENSSL_VERSION_NUMBER >= 0x0090806fL && !defined(OPENSSL_NO_TLSEXT)
# define EXIM_HAVE_OPENSSL_TLSEXT
#endif
-#if OPENSSL_VERSION_NUMBER >= 0x010100000L
-# define EXIM_HAVE_OPENSSL_CHECKHOST
+#if OPENSSL_VERSION_NUMBER >= 0x00908000L
+# define EXIM_HAVE_RSA_GENKEY_EX
+#endif
+#if OPENSSL_VERSION_NUMBER >= 0x10100000L
+# define EXIM_HAVE_OCSP_RESP_COUNT
+#else
+# define EXIM_HAVE_EPHEM_RSA_KEX
+# define EXIM_HAVE_RAND_PSEUDO
+#endif
+#if (OPENSSL_VERSION_NUMBER >= 0x0090800fL) && !defined(OPENSSL_NO_SHA256)
+# define EXIM_HAVE_SHA256
#endif
-#if OPENSSL_VERSION_NUMBER >= 0x010000000L \
+
+/*
+ * X509_check_host provides sane certificate hostname checking, but was added
+ * to OpenSSL late, after other projects forked off the code-base. So in
+ * addition to guarding against the base version number, beware that LibreSSL
+ * does not (at this time) support this function.
+ *
+ * If LibreSSL gains a different API, perhaps via libtls, then we'll probably
+ * opt to disentangle and ask a LibreSSL user to provide glue for a third
+ * crypto provider for libtls instead of continuing to tie the OpenSSL glue
+ * into even twistier knots. If LibreSSL gains the same API, we can just
+ * change this guard and punt the issue for a while longer.
+ */
+#ifndef LIBRESSL_VERSION_NUMBER
+# if OPENSSL_VERSION_NUMBER >= 0x010100000L
+# define EXIM_HAVE_OPENSSL_CHECKHOST
+# define EXIM_HAVE_OPENSSL_DH_BITS
+# endif
+# if OPENSSL_VERSION_NUMBER >= 0x010000000L \
&& (OPENSSL_VERSION_NUMBER & 0x0000ff000L) >= 0x000002000L
-# define EXIM_HAVE_OPENSSL_CHECKHOST
+# define EXIM_HAVE_OPENSSL_CHECKHOST
+# endif
+#endif
+
+#if !defined(LIBRESSL_VERSION_NUMBER) \
+ || LIBRESSL_VERSION_NUMBER >= 0x20010000L
+# if !defined(OPENSSL_NO_ECDH)
+# if OPENSSL_VERSION_NUMBER >= 0x0090800fL
+# define EXIM_HAVE_ECDH
+# endif
+# if OPENSSL_VERSION_NUMBER >= 0x10002000L
+# define EXIM_HAVE_OPENSSL_EC_NIST2NID
+# endif
+# endif
#endif
#if !defined(EXIM_HAVE_OPENSSL_TLSEXT) && !defined(DISABLE_OCSP)
# define DISABLE_OCSP
#endif
+#ifdef EXIM_HAVE_OPENSSL_CHECKHOST
+# include <openssl/x509v3.h>
+#endif
+
/* Structure for collecting random data for seeding. */
typedef struct randstuff {
typedef struct tls_ext_ctx_cb {
uschar *certificate;
uschar *privatekey;
-#ifndef DISABLE_OCSP
BOOL is_server;
+#ifndef DISABLE_OCSP
+ STACK_OF(X509) *verify_stack; /* chain for verifying the proof */
union {
struct {
uschar *file;
uschar *server_cipher_list;
/* only passed down to tls_error: */
host_item *host;
- uschar * verify_cert_hostnames;
-#ifdef EXPERIMENTAL_EVENT
+ const uschar * verify_cert_hostnames;
+#ifndef DISABLE_EVENT
uschar * event_action;
#endif
} tls_ext_ctx_cb;
static int
setup_certs(SSL_CTX *sctx, uschar *certs, uschar *crl, host_item *host, BOOL optional,
- int (*cert_vfy_cb)(int, X509_STORE_CTX *) );
+ int (*cert_vfy_cb)(int, X509_STORE_CTX *), uschar ** errstr );
/* Callbacks */
#ifdef EXIM_HAVE_OPENSSL_TLSEXT
host NULL if setting up a server;
the connected host if setting up a client
msg error message or NULL if we should ask OpenSSL
+ errstr pointer to output error message
Returns: OK/DEFER/FAIL
*/
static int
-tls_error(uschar * prefix, const host_item * host, uschar * msg)
+tls_error(uschar * prefix, const host_item * host, uschar * msg, uschar ** errstr)
{
if (!msg)
{
ERR_error_string(ERR_get_error(), ssl_errstring);
- msg = (uschar *)ssl_errstring;
+ msg = US ssl_errstring;
}
-if (host)
- {
- log_write(0, LOG_MAIN, "H=%s [%s] TLS error on connection (%s): %s",
- host->name, host->address, prefix, msg);
- return FAIL;
- }
-else
- {
- uschar *conn_info = smtp_get_connection_info();
- if (Ustrncmp(conn_info, US"SMTP ", 5) == 0)
- conn_info += 5;
- /* I'd like to get separated H= here, but too hard for now */
- log_write(0, LOG_MAIN, "TLS error on %s (%s): %s",
- conn_info, prefix, msg);
- return DEFER;
- }
+if (errstr) *errstr = string_sprintf("(%s): %s", prefix, msg);
+return host ? FAIL : DEFER;
}
/*
Arguments:
- s SSL connection
+ s SSL connection (not used)
export not used
keylength keylength
rsa_callback(SSL *s, int export, int keylength)
{
RSA *rsa_key;
+#ifdef EXIM_HAVE_RSA_GENKEY_EX
+BIGNUM *bn = BN_new();
+#endif
+
export = export; /* Shut picky compilers up */
DEBUG(D_tls) debug_printf("Generating %d bit RSA key...\n", keylength);
-rsa_key = RSA_generate_key(keylength, RSA_F4, NULL, NULL);
-if (rsa_key == NULL)
+
+#ifdef EXIM_HAVE_RSA_GENKEY_EX
+if ( !BN_set_word(bn, (unsigned long)RSA_F4)
+ || !(rsa_key = RSA_new())
+ || !RSA_generate_key_ex(rsa_key, keylength, bn, NULL)
+ )
+#else
+if (!(rsa_key = RSA_generate_key(keylength, RSA_F4, NULL, NULL)))
+#endif
+
{
ERR_error_string(ERR_get_error(), ssl_errstring);
log_write(0, LOG_MAIN|LOG_PANIC, "TLS error (RSA_generate_key): %s",
{
X509 * current_cert= tmp_obj->data.x509;
X509_NAME_oneline(X509_get_subject_name(current_cert), CS name, sizeof(name));
+ name[sizeof(name)-1] = '\0';
debug_printf(" %s\n", name);
}
}
*/
+#ifndef DISABLE_EVENT
+static int
+verify_event(tls_support * tlsp, X509 * cert, int depth, const uschar * dn,
+ BOOL *calledp, const BOOL *optionalp, const uschar * what)
+{
+uschar * ev;
+uschar * yield;
+X509 * old_cert;
+
+ev = tlsp == &tls_out ? client_static_cbinfo->event_action : event_action;
+if (ev)
+ {
+ DEBUG(D_tls) debug_printf("verify_event: %s %d\n", what, depth);
+ old_cert = tlsp->peercert;
+ tlsp->peercert = X509_dup(cert);
+ /* NB we do not bother setting peerdn */
+ if ((yield = event_raise(ev, US"tls:cert", string_sprintf("%d", depth))))
+ {
+ log_write(0, LOG_MAIN, "[%s] %s verify denied by event-action: "
+ "depth=%d cert=%s: %s",
+ tlsp == &tls_out ? deliver_host_address : sender_host_address,
+ what, depth, dn, yield);
+ *calledp = TRUE;
+ if (!*optionalp)
+ {
+ if (old_cert) tlsp->peercert = old_cert; /* restore 1st failing cert */
+ return 1; /* reject (leaving peercert set) */
+ }
+ DEBUG(D_tls) debug_printf("Event-action verify failure overridden "
+ "(host in tls_try_verify_hosts)\n");
+ }
+ X509_free(tlsp->peercert);
+ tlsp->peercert = old_cert;
+ }
+return 0;
+}
+#endif
+
/*************************************************
* Callback for verification *
*************************************************/
/* The SSL library does certificate verification if set up to do so. This
callback has the current yes/no state is in "state". If verification succeeded,
-we set up the tls_peerdn string. If verification failed, what happens depends
-on whether the client is required to present a verifiable certificate or not.
+we set the certificate-verified flag. If verification failed, what happens
+depends on whether the client is required to present a verifiable certificate
+or not.
If verification is optional, we change the state to yes, but still log the
verification error. For some reason (it really would help to have proper
documentation of OpenSSL), this callback function then gets called again, this
-time with state = 1. In fact, that's useful, because we can set up the peerdn
-value, but we must take care not to set the private verified flag on the second
-time through.
+time with state = 1. We must take care not to set the private verified flag on
+the second time through.
Note: this function is not called if the client fails to present a certificate
when asked. We get here only if a certificate has been received. Handling of
for a given "depth" in the certificate chain.
Arguments:
- state current yes/no state as 1/0
- x509ctx certificate information.
- client TRUE for client startup, FALSE for server startup
+ preverify_ok current yes/no state as 1/0
+ x509ctx certificate information.
+ tlsp per-direction (client vs. server) support data
+ calledp has-been-called flag
+ optionalp verification-is-optional flag
-Returns: 1 if verified, 0 if not
+Returns: 0 if verification should fail, otherwise 1
*/
static int
-verify_callback(int state, X509_STORE_CTX *x509ctx,
+verify_callback(int preverify_ok, X509_STORE_CTX *x509ctx,
tls_support *tlsp, BOOL *calledp, BOOL *optionalp)
{
X509 * cert = X509_STORE_CTX_get_current_cert(x509ctx);
int depth = X509_STORE_CTX_get_error_depth(x509ctx);
-static uschar txt[256];
-#ifdef EXPERIMENTAL_EVENT
-uschar * ev;
-uschar * yield;
-#endif
+uschar dn[256];
-X509_NAME_oneline(X509_get_subject_name(cert), CS txt, sizeof(txt));
+X509_NAME_oneline(X509_get_subject_name(cert), CS dn, sizeof(dn));
+dn[sizeof(dn)-1] = '\0';
-if (state == 0)
+if (preverify_ok == 0)
{
- log_write(0, LOG_MAIN, "SSL verify error: depth=%d error=%s cert=%s",
- depth,
- X509_verify_cert_error_string(X509_STORE_CTX_get_error(x509ctx)),
- txt);
+ uschar * extra = verify_mode ? string_sprintf(" (during %c-verify for [%s])",
+ *verify_mode, sender_host_address)
+ : US"";
+ log_write(0, LOG_MAIN, "[%s] SSL verify error%s: depth=%d error=%s cert=%s",
+ tlsp == &tls_out ? deliver_host_address : sender_host_address,
+ extra, depth,
+ X509_verify_cert_error_string(X509_STORE_CTX_get_error(x509ctx)), dn);
*calledp = TRUE;
if (!*optionalp)
{
- tlsp->peercert = X509_dup(cert);
- return 0; /* reject */
+ if (!tlsp->peercert)
+ tlsp->peercert = X509_dup(cert); /* record failing cert */
+ return 0; /* reject */
}
DEBUG(D_tls) debug_printf("SSL verify failure overridden (host in "
"tls_try_verify_hosts)\n");
else if (depth != 0)
{
- DEBUG(D_tls) debug_printf("SSL verify ok: depth=%d SN=%s\n", depth, txt);
+ DEBUG(D_tls) debug_printf("SSL verify ok: depth=%d SN=%s\n", depth, dn);
#ifndef DISABLE_OCSP
if (tlsp == &tls_out && client_static_cbinfo->u_ocsp.client.verify_store)
{ /* client, wanting stapling */
/* Add the server cert's signing chain as the one
for the verification of the OCSP stapled information. */
-
+
if (!X509_STORE_add_cert(client_static_cbinfo->u_ocsp.client.verify_store,
cert))
ERR_clear_error();
+ sk_X509_push(client_static_cbinfo->verify_stack, cert);
}
#endif
-#ifdef EXPERIMENTAL_EVENT
- ev = tlsp == &tls_out ? client_static_cbinfo->event_action : event_action;
- if (ev)
- {
- tlsp->peercert = X509_dup(cert);
- if ((yield = event_raise(ev, US"tls:cert", string_sprintf("%d", depth))))
- {
- log_write(0, LOG_MAIN, "SSL verify denied by event-action: "
- "depth=%d cert=%s: %s", depth, txt, yield);
- *calledp = TRUE;
- if (!*optionalp)
- return 0; /* reject */
- DEBUG(D_tls) debug_printf("Event-action verify failure overridden "
- "(host in tls_try_verify_hosts)\n");
- }
- X509_free(tlsp->peercert);
- tlsp->peercert = NULL;
- }
+#ifndef DISABLE_EVENT
+ if (verify_event(tlsp, cert, depth, dn, calledp, optionalp, US"SSL"))
+ return 0; /* reject, with peercert set */
#endif
}
else
{
- uschar * verify_cert_hostnames;
-
- tlsp->peerdn = txt;
- tlsp->peercert = X509_dup(cert);
+ const uschar * verify_cert_hostnames;
if ( tlsp == &tls_out
&& ((verify_cert_hostnames = client_static_cbinfo->verify_cert_hostnames)))
/* client, wanting hostname check */
-
-# if EXIM_HAVE_OPENSSL_CHECKHOST
-# ifndef X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS
-# define X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS 0
-# endif
-# ifndef X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS
-# define X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS 0
-# endif
{
+
+#ifdef EXIM_HAVE_OPENSSL_CHECKHOST
+# ifndef X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS
+# define X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS 0
+# endif
+# ifndef X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS
+# define X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS 0
+# endif
int sep = 0;
- uschar * list = verify_cert_hostnames;
+ const uschar * list = verify_cert_hostnames;
uschar * name;
int rc;
while ((name = string_nextinlist(&list, &sep, NULL, 0)))
- if ((rc = X509_check_host(cert, name, 0,
+ if ((rc = X509_check_host(cert, CCS name, 0,
X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS
- | X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS)))
+ | X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS,
+ NULL)))
{
if (rc < 0)
{
- log_write(0, LOG_MAIN, "SSL verify error: internal error\n");
+ log_write(0, LOG_MAIN, "[%s] SSL verify error: internal error",
+ tlsp == &tls_out ? deliver_host_address : sender_host_address);
name = NULL;
}
break;
}
if (!name)
- {
- log_write(0, LOG_MAIN,
- "SSL verify error: certificate name mismatch: \"%s\"\n", txt);
- *calledp = TRUE;
- if (!*optionalp)
- return 0; /* reject */
- DEBUG(D_tls) debug_printf("SSL verify failure overridden (host in "
- "tls_try_verify_hosts)\n");
- }
- }
-# else
+#else
if (!tls_is_name_for_cert(verify_cert_hostnames, cert))
+#endif
{
+ uschar * extra = verify_mode
+ ? string_sprintf(" (during %c-verify for [%s])",
+ *verify_mode, sender_host_address)
+ : US"";
log_write(0, LOG_MAIN,
- "SSL verify error: certificate name mismatch: \"%s\"\n", txt);
+ "[%s] SSL verify error%s: certificate name mismatch: DN=\"%s\" H=\"%s\"",
+ tlsp == &tls_out ? deliver_host_address : sender_host_address,
+ extra, dn, verify_cert_hostnames);
*calledp = TRUE;
if (!*optionalp)
- return 0; /* reject */
+ {
+ if (!tlsp->peercert)
+ tlsp->peercert = X509_dup(cert); /* record failing cert */
+ return 0; /* reject */
+ }
DEBUG(D_tls) debug_printf("SSL verify failure overridden (host in "
"tls_try_verify_hosts)\n");
}
-# endif
+ }
-#ifdef EXPERIMENTAL_EVENT
- ev = tlsp == &tls_out ? client_static_cbinfo->event_action : event_action;
- if (ev)
- if ((yield = event_raise(ev, US"tls:cert", US"0")))
- {
- log_write(0, LOG_MAIN, "SSL verify denied by event-action: "
- "depth=0 cert=%s: %s", txt, yield);
- *calledp = TRUE;
- if (!*optionalp)
- return 0; /* reject */
- DEBUG(D_tls) debug_printf("Event-action verify failure overridden "
- "(host in tls_try_verify_hosts)\n");
- }
+#ifndef DISABLE_EVENT
+ if (verify_event(tlsp, cert, depth, dn, calledp, optionalp, US"SSL"))
+ return 0; /* reject, with peercert set */
#endif
DEBUG(D_tls) debug_printf("SSL%s verify ok: depth=0 SN=%s\n",
- *calledp ? "" : " authenticated", txt);
+ *calledp ? "" : " authenticated", dn);
if (!*calledp) tlsp->certificate_verified = TRUE;
*calledp = TRUE;
}
}
static int
-verify_callback_client(int state, X509_STORE_CTX *x509ctx)
+verify_callback_client(int preverify_ok, X509_STORE_CTX *x509ctx)
{
-return verify_callback(state, x509ctx, &tls_out, &client_verify_callback_called, &client_verify_optional);
+return verify_callback(preverify_ok, x509ctx, &tls_out,
+ &client_verify_callback_called, &client_verify_optional);
}
static int
-verify_callback_server(int state, X509_STORE_CTX *x509ctx)
+verify_callback_server(int preverify_ok, X509_STORE_CTX *x509ctx)
{
-return verify_callback(state, x509ctx, &tls_in, &server_verify_callback_called, &server_verify_optional);
+return verify_callback(preverify_ok, x509ctx, &tls_in,
+ &server_verify_callback_called, &server_verify_optional);
}
itself.
*/
static int
-verify_callback_client_dane(int state, X509_STORE_CTX * x509ctx)
+verify_callback_client_dane(int preverify_ok, X509_STORE_CTX * x509ctx)
{
X509 * cert = X509_STORE_CTX_get_current_cert(x509ctx);
-static uschar txt[256];
-#ifdef EXPERIMENTAL_EVENT
+uschar dn[256];
int depth = X509_STORE_CTX_get_error_depth(x509ctx);
-uschar * yield;
+#ifndef DISABLE_EVENT
+BOOL dummy_called, optional = FALSE;
#endif
-X509_NAME_oneline(X509_get_subject_name(cert), CS txt, sizeof(txt));
+X509_NAME_oneline(X509_get_subject_name(cert), CS dn, sizeof(dn));
+dn[sizeof(dn)-1] = '\0';
-DEBUG(D_tls) debug_printf("verify_callback_client_dane: %s\n", txt);
-tls_out.peerdn = txt;
-tls_out.peercert = X509_dup(cert);
+DEBUG(D_tls) debug_printf("verify_callback_client_dane: %s depth %d %s\n",
+ preverify_ok ? "ok":"BAD", depth, dn);
-#ifdef EXPERIMENTAL_EVENT
- if (client_static_cbinfo->event_action)
- {
- if ((yield = event_raise(client_static_cbinfo->event_action,
- US"tls:cert", string_sprintf("%d", depth))))
- {
- log_write(0, LOG_MAIN, "DANE verify denied by event-action: "
- "depth=%d cert=%s: %s", depth, txt, yield);
- tls_out.certificate_verified = FALSE;
- return 0; /* reject */
- }
- if (depth != 0)
- {
- X509_free(tls_out.peercert);
- tls_out.peercert = NULL;
- }
- }
+#ifndef DISABLE_EVENT
+ if (verify_event(&tls_out, cert, depth, dn,
+ &dummy_called, &optional, US"DANE"))
+ return 0; /* reject, with peercert set */
#endif
-if (state == 1)
- tls_out.dane_verified =
- tls_out.certificate_verified = TRUE;
-return 1;
+if (preverify_ok == 1)
+ {
+ tls_out.dane_verified = tls_out.certificate_verified = TRUE;
+#ifndef DISABLE_OCSP
+ if (client_static_cbinfo->u_ocsp.client.verify_store)
+ { /* client, wanting stapling */
+ /* Add the server cert's signing chain as the one
+ for the verification of the OCSP stapled information. */
+
+ if (!X509_STORE_add_cert(client_static_cbinfo->u_ocsp.client.verify_store,
+ cert))
+ ERR_clear_error();
+ sk_X509_push(client_static_cbinfo->verify_stack, cert);
+ }
+#endif
+ }
+else
+ {
+ int err = X509_STORE_CTX_get_error(x509ctx);
+ DEBUG(D_tls)
+ debug_printf(" - err %d '%s'\n", err, X509_verify_cert_error_string(err));
+ if (err == X509_V_ERR_APPLICATION_VERIFICATION)
+ preverify_ok = 1;
+ }
+return preverify_ok;
}
#endif /*EXPERIMENTAL_DANE*/
/* If dhparam is set, expand it, and load up the parameters for DH encryption.
Arguments:
+ sctx The current SSL CTX (inbound or outbound)
dhparam DH parameter file or fixed parameter identity string
host connected host, if client; NULL if server
+ errstr error string pointer
Returns: TRUE if OK (nothing to set up, or setup worked)
*/
static BOOL
-init_dh(SSL_CTX *sctx, uschar *dhparam, const host_item *host)
+init_dh(SSL_CTX *sctx, uschar *dhparam, const host_item *host, uschar ** errstr)
{
BIO *bio;
DH *dh;
uschar *dhexpanded;
const char *pem;
+int dh_bitsize;
-if (!expand_check(dhparam, US"tls_dhparam", &dhexpanded))
+if (!expand_check(dhparam, US"tls_dhparam", &dhexpanded, errstr))
return FALSE;
if (!dhexpanded || !*dhexpanded)
if (!(bio = BIO_new_file(CS dhexpanded, "r")))
{
tls_error(string_sprintf("could not read dhparams file %s", dhexpanded),
- host, US strerror(errno));
+ host, US strerror(errno), errstr);
return FALSE;
}
}
if (!(pem = std_dh_prime_named(dhexpanded)))
{
tls_error(string_sprintf("Unknown standard DH prime \"%s\"", dhexpanded),
- host, US strerror(errno));
+ host, US strerror(errno), errstr);
return FALSE;
}
bio = BIO_new_mem_buf(CS pem, -1);
{
BIO_free(bio);
tls_error(string_sprintf("Could not read tls_dhparams \"%s\"", dhexpanded),
- host, NULL);
+ host, NULL, errstr);
return FALSE;
}
+/* note: our default limit of 2236 is not a multiple of 8; the limit comes from
+ * an NSS limit, and the GnuTLS APIs handle bit-sizes fine, so we went with
+ * 2236. But older OpenSSL can only report in bytes (octets), not bits.
+ * If someone wants to dance at the edge, then they can raise the limit or use
+ * current libraries. */
+#ifdef EXIM_HAVE_OPENSSL_DH_BITS
+/* Added in commit 26c79d5641d; `git describe --contains` says OpenSSL_1_1_0-pre1~1022
+ * This predates OpenSSL_1_1_0 (before a, b, ...) so is in all 1.1.0 */
+dh_bitsize = DH_bits(dh);
+#else
+dh_bitsize = 8 * DH_size(dh);
+#endif
+
/* Even if it is larger, we silently return success rather than cause things
* to fail out, so that a too-large DH will not knock out all TLS; it's a
* debatable choice. */
-if ((8*DH_size(dh)) > tls_dh_max_bits)
+if (dh_bitsize > tls_dh_max_bits)
{
DEBUG(D_tls)
- debug_printf("dhparams file %d bits, is > tls_dh_max_bits limit of %d",
- 8*DH_size(dh), tls_dh_max_bits);
+ debug_printf("dhparams file %d bits, is > tls_dh_max_bits limit of %d\n",
+ dh_bitsize, tls_dh_max_bits);
}
else
{
SSL_CTX_set_tmp_dh(sctx, dh);
DEBUG(D_tls)
debug_printf("Diffie-Hellman initialized from %s with %d-bit prime\n",
- dhexpanded ? dhexpanded : US"default", 8*DH_size(dh));
+ dhexpanded ? dhexpanded : US"default", dh_bitsize);
}
DH_free(dh);
+/*************************************************
+* Initialize for ECDH *
+*************************************************/
+
+/* Load parameters for ECDH encryption.
+
+For now, we stick to NIST P-256 because: it's simple and easy to configure;
+it avoids any patent issues that might bite redistributors; despite events in
+the news and concerns over curve choices, we're not cryptographers, we're not
+pretending to be, and this is "good enough" to be better than no support,
+protecting against most adversaries. Given another year or two, there might
+be sufficient clarity about a "right" way forward to let us make an informed
+decision, instead of a knee-jerk reaction.
+
+Longer-term, we should look at supporting both various named curves and
+external files generated with "openssl ecparam", much as we do for init_dh().
+We should also support "none" as a value, to explicitly avoid initialisation.
+
+Patches welcome.
+
+Arguments:
+ sctx The current SSL CTX (inbound or outbound)
+ host connected host, if client; NULL if server
+ errstr error string pointer
+
+Returns: TRUE if OK (nothing to set up, or setup worked)
+*/
+
+static BOOL
+init_ecdh(SSL_CTX * sctx, host_item * host, uschar ** errstr)
+{
+#ifdef OPENSSL_NO_ECDH
+return TRUE;
+#else
+
+EC_KEY * ecdh;
+uschar * exp_curve;
+int nid;
+BOOL rv;
+
+if (host) /* No ECDH setup for clients, only for servers */
+ return TRUE;
+
+# ifndef EXIM_HAVE_ECDH
+DEBUG(D_tls)
+ debug_printf("No OpenSSL API to define ECDH parameters, skipping\n");
+return TRUE;
+# else
+
+if (!expand_check(tls_eccurve, US"tls_eccurve", &exp_curve, errstr))
+ return FALSE;
+if (!exp_curve || !*exp_curve)
+ return TRUE;
+
+/* "auto" needs to be handled carefully.
+ * OpenSSL < 1.0.2: we do not select anything, but fallback to prime256v1
+ * OpenSSL < 1.1.0: we have to call SSL_CTX_set_ecdh_auto
+ * (openssl/ssl.h defines SSL_CTRL_SET_ECDH_AUTO)
+ * OpenSSL >= 1.1.0: we do not set anything, the libray does autoselection
+ * https://github.com/openssl/openssl/commit/fe6ef2472db933f01b59cad82aa925736935984b
+ */
+if (Ustrcmp(exp_curve, "auto") == 0)
+ {
+#if OPENSSL_VERSION_NUMBER < 0x10002000L
+ DEBUG(D_tls) debug_printf(
+ "ECDH OpenSSL < 1.0.2: temp key parameter settings: overriding \"auto\" with \"prime256v1\"\n");
+ exp_curve = US"prime256v1";
+#else
+# if defined SSL_CTRL_SET_ECDH_AUTO
+ DEBUG(D_tls) debug_printf(
+ "ECDH OpenSSL 1.0.2+ temp key parameter settings: autoselection\n");
+ SSL_CTX_set_ecdh_auto(sctx, 1);
+ return TRUE;
+# else
+ DEBUG(D_tls) debug_printf(
+ "ECDH OpenSSL 1.1.0+ temp key parameter settings: default selection\n");
+ return TRUE;
+# endif
+#endif
+ }
+
+DEBUG(D_tls) debug_printf("ECDH: curve '%s'\n", exp_curve);
+if ( (nid = OBJ_sn2nid (CCS exp_curve)) == NID_undef
+# ifdef EXIM_HAVE_OPENSSL_EC_NIST2NID
+ && (nid = EC_curve_nist2nid(CCS exp_curve)) == NID_undef
+# endif
+ )
+ {
+ tls_error(string_sprintf("Unknown curve name tls_eccurve '%s'", exp_curve),
+ host, NULL, errstr);
+ return FALSE;
+ }
+
+if (!(ecdh = EC_KEY_new_by_curve_name(nid)))
+ {
+ tls_error(US"Unable to create ec curve", host, NULL, errstr);
+ return FALSE;
+ }
+
+/* The "tmp" in the name here refers to setting a temporary key
+not to the stability of the interface. */
+
+if ((rv = SSL_CTX_set_tmp_ecdh(sctx, ecdh) == 0))
+ tls_error(string_sprintf("Error enabling '%s' curve", exp_curve), host, NULL, errstr);
+else
+ DEBUG(D_tls) debug_printf("ECDH: enabled '%s' curve\n", exp_curve);
+
+EC_KEY_free(ecdh);
+return !rv;
+
+# endif /*EXIM_HAVE_ECDH*/
+#endif /*OPENSSL_NO_ECDH*/
+}
+
+
+
+
#ifndef DISABLE_OCSP
/*************************************************
* Load OCSP information into state *
*************************************************/
-
/* Called to load the server OCSP response from the given file into memory, once
caller has determined this is needed. Checks validity. Debugs a message
if invalid.
static void
ocsp_load_response(SSL_CTX *sctx, tls_ext_ctx_cb *cbinfo, const uschar *expanded)
{
-BIO *bio;
-OCSP_RESPONSE *resp;
-OCSP_BASICRESP *basic_response;
-OCSP_SINGLERESP *single_response;
-ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd;
-X509_STORE *store;
+BIO * bio;
+OCSP_RESPONSE * resp;
+OCSP_BASICRESP * basic_response;
+OCSP_SINGLERESP * single_response;
+ASN1_GENERALIZEDTIME * rev, * thisupd, * nextupd;
+STACK_OF(X509) * sk;
unsigned long verify_flags;
int status, reason, i;
cbinfo->u_ocsp.server.response = NULL;
}
-bio = BIO_new_file(CS cbinfo->u_ocsp.server.file_expanded, "rb");
-if (!bio)
+if (!(bio = BIO_new_file(CS cbinfo->u_ocsp.server.file_expanded, "rb")))
{
DEBUG(D_tls) debug_printf("Failed to open OCSP response file \"%s\"\n",
cbinfo->u_ocsp.server.file_expanded);
return;
}
-status = OCSP_response_status(resp);
-if (status != OCSP_RESPONSE_STATUS_SUCCESSFUL)
+if ((status = OCSP_response_status(resp)) != OCSP_RESPONSE_STATUS_SUCCESSFUL)
{
DEBUG(D_tls) debug_printf("OCSP response not valid: %s (%d)\n",
OCSP_response_status_str(status), status);
goto bad;
}
-basic_response = OCSP_response_get1_basic(resp);
-if (!basic_response)
+if (!(basic_response = OCSP_response_get1_basic(resp)))
{
DEBUG(D_tls)
debug_printf("OCSP response parse error: unable to extract basic response.\n");
goto bad;
}
-store = SSL_CTX_get_cert_store(sctx);
+sk = cbinfo->verify_stack;
verify_flags = OCSP_NOVERIFY; /* check sigs, but not purpose */
/* May need to expose ability to adjust those flags?
OCSP_NOSIGS OCSP_NOVERIFY OCSP_NOCHAIN OCSP_NOCHECKS OCSP_NOEXPLICIT
OCSP_TRUSTOTHER OCSP_NOINTERN */
-i = OCSP_basic_verify(basic_response, NULL, store, verify_flags);
-if (i <= 0)
+/* This does a full verify on the OCSP proof before we load it for serving
+up; possibly overkill - just date-checks might be nice enough.
+
+OCSP_basic_verify takes a "store" arg, but does not
+use it for the chain verification, which is all we do
+when OCSP_NOVERIFY is set. The content from the wire
+"basic_response" and a cert-stack "sk" are all that is used.
+
+We have a stack, loaded in setup_certs() if tls_verify_certificates
+was a file (not a directory, or "system"). It is unfortunate we
+cannot used the connection context store, as that would neatly
+handle the "system" case too, but there seems to be no library
+function for getting a stack from a store.
+[ In OpenSSL 1.1 - ? X509_STORE_CTX_get0_chain(ctx) ? ]
+We do not free the stack since it could be needed a second time for
+SNI handling.
+
+Separately we might try to replace using OCSP_basic_verify() - which seems to not
+be a public interface into the OpenSSL library (there's no manual entry) -
+But what with? We also use OCSP_basic_verify in the client stapling callback.
+And there we NEED it; we must verify that status... unless the
+library does it for us anyway? */
+
+if ((i = OCSP_basic_verify(basic_response, sk, NULL, verify_flags)) < 0)
{
- DEBUG(D_tls) {
+ DEBUG(D_tls)
+ {
ERR_error_string(ERR_get_error(), ssl_errstring);
debug_printf("OCSP response verify failure: %s\n", US ssl_errstring);
}
right cert in the stack and then calls OCSP_single_get0_status()).
I'm hoping to avoid reworking a bunch more of how we handle state here. */
-single_response = OCSP_resp_get0(basic_response, 0);
-if (!single_response)
+
+if (!(single_response = OCSP_resp_get0(basic_response, 0)))
{
DEBUG(D_tls)
debug_printf("Unable to get first response from OCSP basic response.\n");
}
supply_response:
- cbinfo->u_ocsp.server.response = resp;
+ cbinfo->u_ocsp.server.response = resp; /*XXX stack?*/
return;
bad:
{
extern char ** environ;
uschar ** p;
- for (p = USS environ; *p != NULL; p++)
+ if (environ) for (p = USS environ; *p; p++)
if (Ustrncmp(*p, "EXIM_TESTHARNESS_DISABLE_OCSPVALIDITYCHECK", 42) == 0)
{
DEBUG(D_tls) debug_printf("Supplying known bad OCSP response\n");
+/* Create and install a selfsigned certificate, for use in server mode */
+
+static int
+tls_install_selfsign(SSL_CTX * sctx, uschar ** errstr)
+{
+X509 * x509 = NULL;
+EVP_PKEY * pkey;
+RSA * rsa;
+X509_NAME * name;
+uschar * where;
+
+where = US"allocating pkey";
+if (!(pkey = EVP_PKEY_new()))
+ goto err;
+
+where = US"allocating cert";
+if (!(x509 = X509_new()))
+ goto err;
+
+where = US"generating pkey";
+if (!(rsa = rsa_callback(NULL, 0, 1024)))
+ goto err;
+
+where = US"assigning pkey";
+if (!EVP_PKEY_assign_RSA(pkey, rsa))
+ goto err;
+
+X509_set_version(x509, 2); /* N+1 - version 3 */
+ASN1_INTEGER_set(X509_get_serialNumber(x509), 0);
+X509_gmtime_adj(X509_get_notBefore(x509), 0);
+X509_gmtime_adj(X509_get_notAfter(x509), (long)60 * 60); /* 1 hour */
+X509_set_pubkey(x509, pkey);
+
+name = X509_get_subject_name(x509);
+X509_NAME_add_entry_by_txt(name, "C",
+ MBSTRING_ASC, CUS "UK", -1, -1, 0);
+X509_NAME_add_entry_by_txt(name, "O",
+ MBSTRING_ASC, CUS "Exim Developers", -1, -1, 0);
+X509_NAME_add_entry_by_txt(name, "CN",
+ MBSTRING_ASC, CUS smtp_active_hostname, -1, -1, 0);
+X509_set_issuer_name(x509, name);
+
+where = US"signing cert";
+if (!X509_sign(x509, pkey, EVP_md5()))
+ goto err;
+
+where = US"installing selfsign cert";
+if (!SSL_CTX_use_certificate(sctx, x509))
+ goto err;
+
+where = US"installing selfsign key";
+if (!SSL_CTX_use_PrivateKey(sctx, pkey))
+ goto err;
+
+return OK;
+
+err:
+ (void) tls_error(where, NULL, NULL, errstr);
+ if (x509) X509_free(x509);
+ if (pkey) EVP_PKEY_free(pkey);
+ return DEFER;
+}
+
+
+
+
+static int
+tls_add_certfile(SSL_CTX * sctx, tls_ext_ctx_cb * cbinfo, uschar * file,
+ uschar ** errstr)
+{
+DEBUG(D_tls) debug_printf("tls_certificate file %s\n", file);
+if (!SSL_CTX_use_certificate_chain_file(sctx, CS file))
+ return tls_error(string_sprintf(
+ "SSL_CTX_use_certificate_chain_file file=%s", file),
+ cbinfo->host, NULL, errstr);
+return 0;
+}
+
+static int
+tls_add_pkeyfile(SSL_CTX * sctx, tls_ext_ctx_cb * cbinfo, uschar * file,
+ uschar ** errstr)
+{
+DEBUG(D_tls) debug_printf("tls_privatekey file %s\n", file);
+if (!SSL_CTX_use_PrivateKey_file(sctx, CS file, SSL_FILETYPE_PEM))
+ return tls_error(string_sprintf(
+ "SSL_CTX_use_PrivateKey_file file=%s", file), cbinfo->host, NULL, errstr);
+return 0;
+}
+
+
/*************************************************
* Expand key and cert file specs *
*************************************************/
Arguments:
sctx the SSL_CTX* to update
cbinfo various parts of session state
+ errstr error string pointer
Returns: OK/DEFER/FAIL
*/
static int
-tls_expand_session_files(SSL_CTX *sctx, tls_ext_ctx_cb *cbinfo)
+tls_expand_session_files(SSL_CTX *sctx, tls_ext_ctx_cb *cbinfo,
+ uschar ** errstr)
{
uschar *expanded;
-if (cbinfo->certificate == NULL)
- return OK;
+if (!cbinfo->certificate)
+ {
+ if (!cbinfo->is_server) /* client */
+ return OK;
+ /* server */
+ if (tls_install_selfsign(sctx, errstr) != OK)
+ return DEFER;
+ }
+else
+ {
+ int err;
-if (Ustrstr(cbinfo->certificate, US"tls_sni") ||
- Ustrstr(cbinfo->certificate, US"tls_in_sni") ||
- Ustrstr(cbinfo->certificate, US"tls_out_sni")
- )
- reexpand_tls_files_for_sni = TRUE;
+ if (Ustrstr(cbinfo->certificate, US"tls_sni") ||
+ Ustrstr(cbinfo->certificate, US"tls_in_sni") ||
+ Ustrstr(cbinfo->certificate, US"tls_out_sni")
+ )
+ reexpand_tls_files_for_sni = TRUE;
-if (!expand_check(cbinfo->certificate, US"tls_certificate", &expanded))
- return DEFER;
+ if (!expand_check(cbinfo->certificate, US"tls_certificate", &expanded, errstr))
+ return DEFER;
-if (expanded != NULL)
- {
- DEBUG(D_tls) debug_printf("tls_certificate file %s\n", expanded);
- if (!SSL_CTX_use_certificate_chain_file(sctx, CS expanded))
- return tls_error(string_sprintf(
- "SSL_CTX_use_certificate_chain_file file=%s", expanded),
- cbinfo->host, NULL);
- }
+ if (expanded)
+ if (cbinfo->is_server)
+ {
+ const uschar * file_list = expanded;
+ int sep = 0;
+ uschar * file;
-if (cbinfo->privatekey != NULL &&
- !expand_check(cbinfo->privatekey, US"tls_privatekey", &expanded))
- return DEFER;
+ while (file = string_nextinlist(&file_list, &sep, NULL, 0))
+ if ((err = tls_add_certfile(sctx, cbinfo, file, errstr)))
+ return err;
+ }
+ else /* would there ever be a need for multiple client certs? */
+ if ((err = tls_add_certfile(sctx, cbinfo, expanded, errstr)))
+ return err;
+
+ if (cbinfo->privatekey != NULL &&
+ !expand_check(cbinfo->privatekey, US"tls_privatekey", &expanded, errstr))
+ return DEFER;
-/* If expansion was forced to fail, key_expanded will be NULL. If the result
-of the expansion is an empty string, ignore it also, and assume the private
-key is in the same file as the certificate. */
+ /* If expansion was forced to fail, key_expanded will be NULL. If the result
+ of the expansion is an empty string, ignore it also, and assume the private
+ key is in the same file as the certificate. */
-if (expanded != NULL && *expanded != 0)
- {
- DEBUG(D_tls) debug_printf("tls_privatekey file %s\n", expanded);
- if (!SSL_CTX_use_PrivateKey_file(sctx, CS expanded, SSL_FILETYPE_PEM))
- return tls_error(string_sprintf(
- "SSL_CTX_use_PrivateKey_file file=%s", expanded), cbinfo->host, NULL);
+ if (expanded && *expanded)
+ if (cbinfo->is_server)
+ {
+ const uschar * file_list = expanded;
+ int sep = 0;
+ uschar * file;
+
+ while (file = string_nextinlist(&file_list, &sep, NULL, 0))
+ if ((err = tls_add_pkeyfile(sctx, cbinfo, file, errstr)))
+ return err;
+ }
+ else /* would there ever be a need for multiple client certs? */
+ if ((err = tls_add_pkeyfile(sctx, cbinfo, expanded, errstr)))
+ return err;
}
#ifndef DISABLE_OCSP
-if (cbinfo->is_server && cbinfo->u_ocsp.server.file != NULL)
+if (cbinfo->is_server && cbinfo->u_ocsp.server.file)
{
- if (!expand_check(cbinfo->u_ocsp.server.file, US"tls_ocsp_file", &expanded))
+ /*XXX stack*/
+ if (!expand_check(cbinfo->u_ocsp.server.file, US"tls_ocsp_file", &expanded, errstr))
return DEFER;
- if (expanded != NULL && *expanded != 0)
+ if (expanded && *expanded)
{
DEBUG(D_tls) debug_printf("tls_ocsp_file %s\n", expanded);
- if (cbinfo->u_ocsp.server.file_expanded &&
- (Ustrcmp(expanded, cbinfo->u_ocsp.server.file_expanded) == 0))
+ if ( cbinfo->u_ocsp.server.file_expanded
+ && (Ustrcmp(expanded, cbinfo->u_ocsp.server.file_expanded) == 0))
{
- DEBUG(D_tls)
- debug_printf("tls_ocsp_file value unchanged, using existing values.\n");
- } else {
- ocsp_load_response(sctx, cbinfo, expanded);
+ DEBUG(D_tls) debug_printf(" - value unchanged, using existing values\n");
}
+ else
+ ocsp_load_response(sctx, cbinfo, expanded);
}
}
#endif
tls_ext_ctx_cb *cbinfo = (tls_ext_ctx_cb *) arg;
int rc;
int old_pool = store_pool;
+uschar * dummy_errstr;
if (!servername)
return SSL_TLSEXT_ERR_OK;
SSL_CTX_set_timeout(server_sni, SSL_CTX_get_timeout(server_ctx));
SSL_CTX_set_tlsext_servername_callback(server_sni, tls_servername_cb);
SSL_CTX_set_tlsext_servername_arg(server_sni, cbinfo);
+
+if ( !init_dh(server_sni, cbinfo->dhparam, NULL, &dummy_errstr)
+ || !init_ecdh(server_sni, NULL, &dummy_errstr)
+ )
+ return SSL_TLSEXT_ERR_NOACK;
+
if (cbinfo->server_cipher_list)
SSL_CTX_set_cipher_list(server_sni, CS cbinfo->server_cipher_list);
#ifndef DISABLE_OCSP
}
#endif
-rc = setup_certs(server_sni, tls_verify_certificates, tls_crl, NULL, FALSE, verify_callback_server);
-if (rc != OK) return SSL_TLSEXT_ERR_NOACK;
+if ((rc = setup_certs(server_sni, tls_verify_certificates, tls_crl, NULL, FALSE,
+ verify_callback_server, &dummy_errstr)) != OK)
+ return SSL_TLSEXT_ERR_NOACK;
/* do this after setup_certs, because this can require the certs for verifying
OCSP information. */
-rc = tls_expand_session_files(server_sni, cbinfo);
-if (rc != OK) return SSL_TLSEXT_ERR_NOACK;
-
-if (!init_dh(server_sni, cbinfo->dhparam, NULL))
+if ((rc = tls_expand_session_files(server_sni, cbinfo, &dummy_errstr)) != OK)
return SSL_TLSEXT_ERR_NOACK;
DEBUG(D_tls) debug_printf("Switching SSL context.\n");
tls_server_stapling_cb(SSL *s, void *arg)
{
const tls_ext_ctx_cb *cbinfo = (tls_ext_ctx_cb *) arg;
-uschar *response_der;
+uschar *response_der; /*XXX blob */
int response_der_len;
+/*XXX stack: use SSL_get_certificate() to see which cert; from that work
+out which ocsp blob to send. Unfortunately, SSL_get_certificate is known
+buggy in current OpenSSL; it returns the last cert loaded always rather than
+the one actually presented. So we can't support a stack of OCSP proofs at
+this time. */
+
DEBUG(D_tls)
- debug_printf("Received TLS status request (OCSP stapling); %s response.",
+ debug_printf("Received TLS status request (OCSP stapling); %s response\n",
cbinfo->u_ocsp.server.response ? "have" : "lack");
tls_in.ocsp = OCSP_NOT_RESP;
return SSL_TLSEXT_ERR_NOACK;
response_der = NULL;
-response_der_len = i2d_OCSP_RESPONSE(cbinfo->u_ocsp.server.response,
+response_der_len = i2d_OCSP_RESPONSE(cbinfo->u_ocsp.server.response, /*XXX stack*/
&response_der);
if (response_der_len <= 0)
return SSL_TLSEXT_ERR_NOACK;
if(!p)
{
/* Expect this when we requested ocsp but got none */
- if ( cbinfo->u_ocsp.client.verify_required
- && log_extra_selector & LX_tls_cipher)
+ if (cbinfo->u_ocsp.client.verify_required && LOGGING(tls_cipher))
log_write(0, LOG_MAIN, "Received TLS status callback, null content");
else
DEBUG(D_tls) debug_printf(" null\n");
if(!(rsp = d2i_OCSP_RESPONSE(NULL, &p, len)))
{
tls_out.ocsp = OCSP_FAILED;
- if (log_extra_selector & LX_tls_cipher)
+ if (LOGGING(tls_cipher))
log_write(0, LOG_MAIN, "Received TLS cert status response, parse error");
else
DEBUG(D_tls) debug_printf(" parse error\n");
if(!(bs = OCSP_response_get1_basic(rsp)))
{
tls_out.ocsp = OCSP_FAILED;
- if (log_extra_selector & LX_tls_cipher)
+ if (LOGGING(tls_cipher))
log_write(0, LOG_MAIN, "Received TLS cert status response, error parsing response");
else
DEBUG(D_tls) debug_printf(" error parsing response\n");
int status, reason;
ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd;
- DEBUG(D_tls) bp = BIO_new_fp(stderr, BIO_NOCLOSE);
+ DEBUG(D_tls) bp = BIO_new_fp(debug_file, BIO_NOCLOSE);
/*OCSP_RESPONSE_print(bp, rsp, 0); extreme debug: stapling content */
/* Use the chain that verified the server cert to verify the stapled info */
/* DEBUG(D_tls) x509_store_dump_cert_s_names(cbinfo->u_ocsp.client.verify_store); */
- if ((i = OCSP_basic_verify(bs, NULL,
+ if ((i = OCSP_basic_verify(bs, cbinfo->verify_stack,
cbinfo->u_ocsp.client.verify_store, 0)) <= 0)
{
tls_out.ocsp = OCSP_FAILED;
- if (log_extra_selector & LX_tls_cipher)
- log_write(0, LOG_MAIN, "Received TLS cert status response, itself unverifiable");
+ if (LOGGING(tls_cipher)) log_write(0, LOG_MAIN,
+ "Received TLS cert status response, itself unverifiable: %s",
+ ERR_reason_error_string(ERR_peek_error()));
BIO_printf(bp, "OCSP response verify failure\n");
ERR_print_errors(bp);
- i = cbinfo->u_ocsp.client.verify_required ? 0 : 1;
- goto out;
+ OCSP_RESPONSE_print(bp, rsp, 0);
+ goto failed;
}
BIO_printf(bp, "OCSP response well-formed and signed OK\n");
+ /*XXX So we have a good stapled OCSP status. How do we know
+ it is for the cert of interest? OpenSSL 1.1.0 has a routine
+ OCSP_resp_find_status() which matches on a cert id, which presumably
+ we should use. Making an id needs OCSP_cert_id_new(), which takes
+ issuerName, issuerKey, serialNumber. Are they all in the cert?
+
+ For now, carry on blindly accepting the resp. */
+
{
- STACK_OF(OCSP_SINGLERESP) * sresp = bs->tbsResponseData->responses;
OCSP_SINGLERESP * single;
+#ifdef EXIM_HAVE_OCSP_RESP_COUNT
+ if (OCSP_resp_count(bs) != 1)
+#else
+ STACK_OF(OCSP_SINGLERESP) * sresp = bs->tbsResponseData->responses;
if (sk_OCSP_SINGLERESP_num(sresp) != 1)
+#endif
{
tls_out.ocsp = OCSP_FAILED;
log_write(0, LOG_MAIN, "OCSP stapling "
"with multiple responses not handled");
- i = cbinfo->u_ocsp.client.verify_required ? 0 : 1;
- goto out;
+ goto failed;
}
single = OCSP_resp_get0(bs, 0);
status = OCSP_single_get0_status(single, &reason, &rev,
tls_out.ocsp = OCSP_FAILED;
DEBUG(D_tls) ERR_print_errors(bp);
log_write(0, LOG_MAIN, "Server OSCP dates invalid");
- i = cbinfo->u_ocsp.client.verify_required ? 0 : 1;
}
else
{
case V_OCSP_CERTSTATUS_GOOD:
tls_out.ocsp = OCSP_VFIED;
i = 1;
- break;
+ goto good;
case V_OCSP_CERTSTATUS_REVOKED:
tls_out.ocsp = OCSP_FAILED;
log_write(0, LOG_MAIN, "Server certificate revoked%s%s",
reason != -1 ? "; reason: " : "",
reason != -1 ? OCSP_crl_reason_str(reason) : "");
DEBUG(D_tls) time_print(bp, "Revocation Time", rev);
- i = cbinfo->u_ocsp.client.verify_required ? 0 : 1;
break;
default:
tls_out.ocsp = OCSP_FAILED;
log_write(0, LOG_MAIN,
"Server certificate status unknown, in OCSP stapling");
- i = cbinfo->u_ocsp.client.verify_required ? 0 : 1;
break;
}
}
- out:
+ failed:
+ i = cbinfo->u_ocsp.client.verify_required ? 0 : 1;
+ good:
BIO_free(bp);
}
ocsp_file file of stapling info (server); flag for require ocsp (client)
addr address if client; NULL if server (for some randomness)
cbp place to put allocated callback context
+ errstr error string pointer
Returns: OK/DEFER/FAIL
*/
tls_init(SSL_CTX **ctxp, host_item *host, uschar *dhparam, uschar *certificate,
uschar *privatekey,
#ifndef DISABLE_OCSP
- uschar *ocsp_file,
+ uschar *ocsp_file, /*XXX stack, in server*/
#endif
- address_item *addr, tls_ext_ctx_cb ** cbp)
+ address_item *addr, tls_ext_ctx_cb ** cbp, uschar ** errstr)
{
+SSL_CTX * ctx;
long init_options;
int rc;
-BOOL okay;
tls_ext_ctx_cb * cbinfo;
cbinfo = store_malloc(sizeof(tls_ext_ctx_cb));
cbinfo->certificate = certificate;
cbinfo->privatekey = privatekey;
+cbinfo->is_server = host==NULL;
#ifndef DISABLE_OCSP
-if ((cbinfo->is_server = host==NULL))
+cbinfo->verify_stack = NULL;
+if (!host)
{
cbinfo->u_ocsp.server.file = ocsp_file;
cbinfo->u_ocsp.server.file_expanded = NULL;
cbinfo->dhparam = dhparam;
cbinfo->server_cipher_list = NULL;
cbinfo->host = host;
-#ifdef EXPERIMENTAL_EVENT
+#ifndef DISABLE_EVENT
cbinfo->event_action = NULL;
#endif
SSL_load_error_strings(); /* basic set up */
OpenSSL_add_ssl_algorithms();
-#if (OPENSSL_VERSION_NUMBER >= 0x0090800fL) && !defined(OPENSSL_NO_SHA256)
+#ifdef EXIM_HAVE_SHA256
/* SHA256 is becoming ever more popular. This makes sure it gets added to the
list of available digests. */
EVP_add_digest(EVP_sha256());
By disabling with openssl_options, we can let admins re-enable with the
existing knob. */
-*ctxp = SSL_CTX_new((host == NULL)?
- SSLv23_server_method() : SSLv23_client_method());
-
-if (*ctxp == NULL) return tls_error(US"SSL_CTX_new", host, NULL);
+if (!(ctx = SSL_CTX_new(host ? SSLv23_client_method() : SSLv23_server_method())))
+ return tls_error(US"SSL_CTX_new", host, NULL, errstr);
/* It turns out that we need to seed the random number generator this early in
order to get the full complement of ciphers to work. It took me roughly a day
gettimeofday(&r.tv, NULL);
r.p = getpid();
- RAND_seed((uschar *)(&r), sizeof(r));
- RAND_seed((uschar *)big_buffer, big_buffer_size);
- if (addr != NULL) RAND_seed((uschar *)addr, sizeof(addr));
+ RAND_seed(US (&r), sizeof(r));
+ RAND_seed(US big_buffer, big_buffer_size);
+ if (addr != NULL) RAND_seed(US addr, sizeof(addr));
if (!RAND_status())
return tls_error(US"RAND_status", host,
- US"unable to seed random number generator");
+ US"unable to seed random number generator", errstr);
}
/* Set up the information callback, which outputs if debugging is at a suitable
level. */
-SSL_CTX_set_info_callback(*ctxp, (void (*)())info_callback);
+DEBUG(D_tls) SSL_CTX_set_info_callback(ctx, (void (*)())info_callback);
/* Automatically re-try reads/writes after renegotiation. */
-(void) SSL_CTX_set_mode(*ctxp, SSL_MODE_AUTO_RETRY);
+(void) SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
/* Apply administrator-supplied work-arounds.
Historically we applied just one requested option,
No OpenSSL version number checks: the options we accept depend upon the
availability of the option value macros from OpenSSL. */
-okay = tls_openssl_options_parse(openssl_options, &init_options);
-if (!okay)
- return tls_error(US"openssl_options parsing failed", host, NULL);
+if (!tls_openssl_options_parse(openssl_options, &init_options))
+ return tls_error(US"openssl_options parsing failed", host, NULL, errstr);
if (init_options)
{
DEBUG(D_tls) debug_printf("setting SSL CTX options: %#lx\n", init_options);
- if (!(SSL_CTX_set_options(*ctxp, init_options)))
+ if (!(SSL_CTX_set_options(ctx, init_options)))
return tls_error(string_sprintf(
- "SSL_CTX_set_option(%#lx)", init_options), host, NULL);
+ "SSL_CTX_set_option(%#lx)", init_options), host, NULL, errstr);
}
else
DEBUG(D_tls) debug_printf("no SSL CTX options to set\n");
+/* Disable session cache unconditionally */
+
+(void) SSL_CTX_set_session_cache_mode(ctx, SSL_SESS_CACHE_OFF);
+
/* Initialize with DH parameters if supplied */
+/* Initialize ECDH temp key parameter selection */
-if (!init_dh(*ctxp, dhparam, host)) return DEFER;
+if ( !init_dh(ctx, dhparam, host, errstr)
+ || !init_ecdh(ctx, host, errstr)
+ )
+ return DEFER;
/* Set up certificate and key (and perhaps OCSP info) */
-rc = tls_expand_session_files(*ctxp, cbinfo);
-if (rc != OK) return rc;
+if ((rc = tls_expand_session_files(ctx, cbinfo, errstr)) != OK)
+ return rc;
+
+/* If we need to handle SNI or OCSP, do so */
-/* If we need to handle SNI, do so */
#ifdef EXIM_HAVE_OPENSSL_TLSEXT
+# ifndef DISABLE_OCSP
+ if (!(cbinfo->verify_stack = sk_X509_new_null()))
+ {
+ DEBUG(D_tls) debug_printf("failed to create stack for stapling verify\n");
+ return FAIL;
+ }
+# endif
+
if (host == NULL) /* server */
{
# ifndef DISABLE_OCSP
callback is invoked. */
if (cbinfo->u_ocsp.server.file)
{
- SSL_CTX_set_tlsext_status_cb(server_ctx, tls_server_stapling_cb);
- SSL_CTX_set_tlsext_status_arg(server_ctx, cbinfo);
+ SSL_CTX_set_tlsext_status_cb(ctx, tls_server_stapling_cb);
+ SSL_CTX_set_tlsext_status_arg(ctx, cbinfo);
}
# endif
/* We always do this, so that $tls_sni is available even if not used in
tls_certificate */
- SSL_CTX_set_tlsext_servername_callback(*ctxp, tls_servername_cb);
- SSL_CTX_set_tlsext_servername_arg(*ctxp, cbinfo);
+ SSL_CTX_set_tlsext_servername_callback(ctx, tls_servername_cb);
+ SSL_CTX_set_tlsext_servername_arg(ctx, cbinfo);
}
# ifndef DISABLE_OCSP
else /* client */
DEBUG(D_tls) debug_printf("failed to create store for stapling verify\n");
return FAIL;
}
- SSL_CTX_set_tlsext_status_cb(*ctxp, tls_client_stapling_cb);
- SSL_CTX_set_tlsext_status_arg(*ctxp, cbinfo);
+ SSL_CTX_set_tlsext_status_cb(ctx, tls_client_stapling_cb);
+ SSL_CTX_set_tlsext_status_arg(ctx, cbinfo);
}
# endif
#endif
cbinfo->verify_cert_hostnames = NULL;
+#ifdef EXIM_HAVE_EPHEM_RSA_KEX
/* Set up the RSA callback */
-
-SSL_CTX_set_tmp_rsa_callback(*ctxp, rsa_callback);
+SSL_CTX_set_tmp_rsa_callback(ctx, rsa_callback);
+#endif
/* Finally, set the timeout, and we are done */
-SSL_CTX_set_timeout(*ctxp, ssl_session_timeout);
+SSL_CTX_set_timeout(ctx, ssl_session_timeout);
DEBUG(D_tls) debug_printf("Initialized TLS\n");
*cbp = cbinfo;
+*ctxp = ctx;
return OK;
}
}
+static void
+peer_cert(SSL * ssl, tls_support * tlsp, uschar * peerdn, unsigned bsize)
+{
+/*XXX we might consider a list-of-certs variable for the cert chain.
+SSL_get_peer_cert_chain(SSL*). We'd need a new variable type and support
+in list-handling functions, also consider the difference between the entire
+chain and the elements sent by the peer. */
+
+/* Will have already noted peercert on a verify fail; possibly not the leaf */
+if (!tlsp->peercert)
+ tlsp->peercert = SSL_get_peer_certificate(ssl);
+/* Beware anonymous ciphers which lead to server_cert being NULL */
+if (tlsp->peercert)
+ {
+ X509_NAME_oneline(X509_get_subject_name(tlsp->peercert), CS peerdn, bsize);
+ peerdn[bsize-1] = '\0';
+ tlsp->peerdn = peerdn; /*XXX a static buffer... */
+ }
+else
+ tlsp->peerdn = NULL;
+}
+
+
* Set up for verifying certificates *
*************************************************/
+/* Load certs from file, return TRUE on success */
+
+static BOOL
+chain_from_pem_file(const uschar * file, STACK_OF(X509) * verify_stack)
+{
+BIO * bp;
+X509 * x;
+
+if (!(bp = BIO_new_file(CS file, "r"))) return FALSE;
+while ((x = PEM_read_bio_X509(bp, NULL, 0, NULL)))
+ sk_X509_push(verify_stack, x);
+BIO_free(bp);
+return TRUE;
+}
+
+
+
/* Called by both client and server startup
Arguments:
optional TRUE if called from a server for a host in tls_try_verify_hosts;
otherwise passed as FALSE
cert_vfy_cb Callback function for certificate verification
+ errstr error string pointer
Returns: OK/DEFER/FAIL
*/
static int
setup_certs(SSL_CTX *sctx, uschar *certs, uschar *crl, host_item *host, BOOL optional,
- int (*cert_vfy_cb)(int, X509_STORE_CTX *) )
+ int (*cert_vfy_cb)(int, X509_STORE_CTX *), uschar ** errstr)
{
uschar *expcerts, *expcrl;
-if (!expand_check(certs, US"tls_verify_certificates", &expcerts))
+if (!expand_check(certs, US"tls_verify_certificates", &expcerts, errstr))
return DEFER;
+DEBUG(D_tls) debug_printf("tls_verify_certificates: %s\n", expcerts);
-if (expcerts != NULL && *expcerts != '\0')
+if (expcerts && *expcerts)
{
- if (Ustrcmp(expcerts, "system") == 0)
- {
- /* Tell the library to use its compiled-in location for the system default
- CA bundle, only */
+ /* Tell the library to use its compiled-in location for the system default
+ CA bundle. Then add the ones specified in the config, if any. */
- if (!SSL_CTX_set_default_verify_paths(sctx))
- return tls_error(US"SSL_CTX_set_default_verify_paths", host, NULL);
- }
- else
+ if (!SSL_CTX_set_default_verify_paths(sctx))
+ return tls_error(US"SSL_CTX_set_default_verify_paths", host, NULL, errstr);
+
+ if (Ustrcmp(expcerts, "system") != 0)
{
struct stat statbuf;
- /* Tell the library to use its compiled-in location for the system default
- CA bundle. Those given by the exim config are additional to these */
-
- if (!SSL_CTX_set_default_verify_paths(sctx))
- return tls_error(US"SSL_CTX_set_default_verify_paths", host, NULL);
-
if (Ustat(expcerts, &statbuf) < 0)
{
log_write(0, LOG_MAIN|LOG_PANIC,
if ((statbuf.st_mode & S_IFMT) == S_IFDIR)
{ file = NULL; dir = expcerts; }
else
- { file = expcerts; dir = NULL; }
+ {
+ file = expcerts; dir = NULL;
+#ifndef DISABLE_OCSP
+ /* In the server if we will be offering an OCSP proof, load chain from
+ file for verifying the OCSP proof at load time. */
+
+ if ( !host
+ && statbuf.st_size > 0
+ && server_static_cbinfo->u_ocsp.server.file
+ && !chain_from_pem_file(file, server_static_cbinfo->verify_stack)
+ )
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "failed to load cert chain from %s", file);
+ return DEFER;
+ }
+#endif
+ }
/* If a certificate file is empty, the next function fails with an
unhelpful error message. If we skip it, we get the correct behaviour (no
certificates are recognized, but the error message is still misleading (it
- says no certificate was supplied.) But this is better. */
+ says no certificate was supplied). But this is better. */
- if ((file == NULL || statbuf.st_size > 0) &&
- !SSL_CTX_load_verify_locations(sctx, CS file, CS dir))
- return tls_error(US"SSL_CTX_load_verify_locations", host, NULL);
+ if ( (!file || statbuf.st_size > 0)
+ && !SSL_CTX_load_verify_locations(sctx, CS file, CS dir))
+ return tls_error(US"SSL_CTX_load_verify_locations", host, NULL, errstr);
/* Load the list of CAs for which we will accept certs, for sending
to the client. This is only for the one-file tls_verify_certificates
variant.
If a list isn't loaded into the server, but
some verify locations are set, the server end appears to make
- a wildcard reqest for client certs.
- Meanwhile, the client library as deafult behaviour *ignores* the list
+ a wildcard request for client certs.
+ Meanwhile, the client library as default behaviour *ignores* the list
we send over the wire - see man SSL_CTX_set_client_cert_cb.
Because of this, and that the dir variant is likely only used for
the public-CA bundle (not for a private CA), not worth fixing.
*/
- if (file != NULL)
+ if (file)
{
STACK_OF(X509_NAME) * names = SSL_load_client_CA_file(CS file);
- DEBUG(D_tls) debug_printf("Added %d certificate authorities.\n",
+
+ DEBUG(D_tls) debug_printf("Added %d certificate authorities.\n",
sk_X509_NAME_num(names));
SSL_CTX_set_client_CA_list(sctx, names);
}
/* Handle a certificate revocation list. */
- #if OPENSSL_VERSION_NUMBER > 0x00907000L
+#if OPENSSL_VERSION_NUMBER > 0x00907000L
/* This bit of code is now the version supplied by Lars Mainka. (I have
- * merely reformatted it into the Exim code style.)
+ merely reformatted it into the Exim code style.)
- * "From here I changed the code to add support for multiple crl's
- * in pem format in one file or to support hashed directory entries in
- * pem format instead of a file. This method now uses the library function
- * X509_STORE_load_locations to add the CRL location to the SSL context.
- * OpenSSL will then handle the verify against CA certs and CRLs by
- * itself in the verify callback." */
+ "From here I changed the code to add support for multiple crl's
+ in pem format in one file or to support hashed directory entries in
+ pem format instead of a file. This method now uses the library function
+ X509_STORE_load_locations to add the CRL location to the SSL context.
+ OpenSSL will then handle the verify against CA certs and CRLs by
+ itself in the verify callback." */
- if (!expand_check(crl, US"tls_crl", &expcrl)) return DEFER;
- if (expcrl != NULL && *expcrl != 0)
+ if (!expand_check(crl, US"tls_crl", &expcrl, errstr)) return DEFER;
+ if (expcrl && *expcrl)
{
struct stat statbufcrl;
if (Ustat(expcrl, &statbufcrl) < 0)
DEBUG(D_tls) debug_printf("SSL CRL value is a file %s\n", file);
}
if (X509_STORE_load_locations(cvstore, CS file, CS dir) == 0)
- return tls_error(US"X509_STORE_load_locations", host, NULL);
+ return tls_error(US"X509_STORE_load_locations", host, NULL, errstr);
/* setting the flags to check against the complete crl chain */
}
}
- #endif /* OPENSSL_VERSION_NUMBER > 0x00907000L */
+#endif /* OPENSSL_VERSION_NUMBER > 0x00907000L */
/* If verification is optional, don't fail if no certificate */
Arguments:
require_ciphers allowed ciphers
+ errstr pointer to error message
Returns: OK on success
DEFER for errors before the start of the negotiation
- FAIL for errors during the negotation; the server can't
+ FAIL for errors during the negotiation; the server can't
continue running.
*/
int
-tls_server_start(const uschar *require_ciphers)
+tls_server_start(const uschar * require_ciphers, uschar ** errstr)
{
int rc;
-uschar *expciphers;
-tls_ext_ctx_cb *cbinfo;
+uschar * expciphers;
+tls_ext_ctx_cb * cbinfo;
+static uschar peerdn[256];
static uschar cipherbuf[256];
/* Check for previous activation */
if (tls_in.active >= 0)
{
- tls_error(US"STARTTLS received after TLS started", NULL, US"");
- smtp_printf("554 Already in TLS\r\n");
+ tls_error(US"STARTTLS received after TLS started", NULL, US"", errstr);
+ smtp_printf("554 Already in TLS\r\n", FALSE);
return FAIL;
}
rc = tls_init(&server_ctx, NULL, tls_dhparam, tls_certificate, tls_privatekey,
#ifndef DISABLE_OCSP
- tls_ocsp_file,
+ tls_ocsp_file, /*XXX stack*/
#endif
- NULL, &server_static_cbinfo);
+ NULL, &server_static_cbinfo, errstr);
if (rc != OK) return rc;
cbinfo = server_static_cbinfo;
-if (!expand_check(require_ciphers, US"tls_require_ciphers", &expciphers))
+if (!expand_check(require_ciphers, US"tls_require_ciphers", &expciphers, errstr))
return FAIL;
/* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
tests, and also for general convenience, we turn underscores into hyphens here.
*/
-if (expciphers != NULL)
+if (expciphers)
{
- uschar *s = expciphers;
+ uschar * s = expciphers;
while (*s != 0) { if (*s == '_') *s = '-'; s++; }
DEBUG(D_tls) debug_printf("required ciphers: %s\n", expciphers);
if (!SSL_CTX_set_cipher_list(server_ctx, CS expciphers))
- return tls_error(US"SSL_CTX_set_cipher_list", NULL, NULL);
+ return tls_error(US"SSL_CTX_set_cipher_list", NULL, NULL, errstr);
cbinfo->server_cipher_list = expciphers;
}
if (verify_check_host(&tls_verify_hosts) == OK)
{
rc = setup_certs(server_ctx, tls_verify_certificates, tls_crl, NULL,
- FALSE, verify_callback_server);
+ FALSE, verify_callback_server, errstr);
if (rc != OK) return rc;
server_verify_optional = FALSE;
}
else if (verify_check_host(&tls_try_verify_hosts) == OK)
{
rc = setup_certs(server_ctx, tls_verify_certificates, tls_crl, NULL,
- TRUE, verify_callback_server);
+ TRUE, verify_callback_server, errstr);
if (rc != OK) return rc;
server_verify_optional = TRUE;
}
/* Prepare for new connection */
-if ((server_ssl = SSL_new(server_ctx)) == NULL) return tls_error(US"SSL_new", NULL, NULL);
+if (!(server_ssl = SSL_new(server_ctx)))
+ return tls_error(US"SSL_new", NULL, NULL, errstr);
/* Warning: we used to SSL_clear(ssl) here, it was removed.
*
SSL_set_session_id_context(server_ssl, sid_ctx, Ustrlen(sid_ctx));
if (!tls_in.on_connect)
{
- smtp_printf("220 TLS go ahead\r\n");
+ smtp_printf("220 TLS go ahead\r\n", FALSE);
fflush(smtp_out);
}
if (rc <= 0)
{
- tls_error(US"SSL_accept", NULL, sigalrm_seen ? US"timed out" : NULL);
- if (ERR_get_error() == 0)
- log_write(0, LOG_MAIN,
- "TLS client disconnected cleanly (rejected our certificate?)");
+ (void) tls_error(US"SSL_accept", NULL, sigalrm_seen ? US"timed out" : NULL, errstr);
return FAIL;
}
/* TLS has been set up. Adjust the input functions to read via TLS,
and initialize things. */
+peer_cert(server_ssl, &tls_in, peerdn, sizeof(peerdn));
+
construct_cipher_name(server_ssl, cipherbuf, sizeof(cipherbuf), &tls_in.bits);
tls_in.cipher = cipherbuf;
ssl_xfer_eof = ssl_xfer_error = 0;
receive_getc = tls_getc;
+receive_getbuf = tls_getbuf;
+receive_get_cache = tls_get_cache;
receive_ungetc = tls_ungetc;
receive_feof = tls_feof;
receive_ferror = tls_ferror;
static int
tls_client_basic_ctx_init(SSL_CTX * ctx,
- host_item * host, smtp_transport_options_block * ob, tls_ext_ctx_cb * cbinfo
- )
+ host_item * host, smtp_transport_options_block * ob, tls_ext_ctx_cb * cbinfo,
+ uschar ** errstr)
{
int rc;
-/* stick to the old behaviour for compatibility if tls_verify_certificates is
+/* stick to the old behaviour for compatibility if tls_verify_certificates is
set but both tls_verify_hosts and tls_try_verify_hosts is not set. Check only
the specified host patterns if one of them is defined */
return OK;
if ((rc = setup_certs(ctx, ob->tls_verify_certificates,
- ob->tls_crl, host, client_verify_optional, verify_callback_client)) != OK)
+ ob->tls_crl, host, client_verify_optional, verify_callback_client,
+ errstr)) != OK)
return rc;
if (verify_check_given_host(&ob->tls_verify_cert_hostnames, host) == OK)
{
- cbinfo->verify_cert_hostnames = host->name;
+ cbinfo->verify_cert_hostnames =
+#ifdef SUPPORT_I18N
+ string_domain_utf8_to_alabel(host->name, NULL);
+#else
+ host->name;
+#endif
DEBUG(D_tls) debug_printf("Cert hostname to check: \"%s\"\n",
cbinfo->verify_cert_hostnames);
}
#ifdef EXPERIMENTAL_DANE
static int
-dane_tlsa_load(SSL * ssl, host_item * host, dns_answer * dnsa)
+dane_tlsa_load(SSL * ssl, host_item * host, dns_answer * dnsa, uschar ** errstr)
{
dns_record * rr;
dns_scan dnss;
int found = 0;
if (DANESSL_init(ssl, NULL, hostnames) != 1)
- return tls_error(US"hostnames load", host, NULL);
+ return tls_error(US"hostnames load", host, NULL, errstr);
for (rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS);
rr;
rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)
) if (rr->type == T_TLSA)
{
- uschar * p = rr->data;
+ const uschar * p = rr->data;
uint8_t usage, selector, mtype;
const char * mdname;
switch (DANESSL_add_tlsa(ssl, usage, selector, mdname, p, rr->size - 3))
{
default:
+ return tls_error(US"tlsa load", host, NULL, errstr);
case 0: /* action not taken */
- return tls_error(US"tlsa load", host, NULL);
case 1: break;
}
return OK;
log_write(0, LOG_MAIN, "DANE error: No usable TLSA records");
-return FAIL;
+return DEFER;
}
#endif /*EXPERIMENTAL_DANE*/
addr the first address
tb transport (always smtp)
tlsa_dnsa tlsa lookup, if DANE, else null
+ errstr error string pointer
Returns: OK on success
FAIL otherwise - note that tls_error() will not give DEFER
int
tls_client_start(int fd, host_item *host, address_item *addr,
- transport_instance *tb
+ transport_instance * tb,
#ifdef EXPERIMENTAL_DANE
- , dns_answer * tlsa_dnsa
+ dns_answer * tlsa_dnsa,
#endif
- )
+ uschar ** errstr)
{
smtp_transport_options_block * ob =
(smtp_transport_options_block *)tb->options_block;
-static uschar txt[256];
+static uschar peerdn[256];
uschar * expciphers;
-X509 * server_cert;
int rc;
static uschar cipherbuf[256];
#ifndef DISABLE_OCSP
(void *)(long)request_ocsp,
#endif
- addr, &client_static_cbinfo);
+ addr, &client_static_cbinfo, errstr);
if (rc != OK) return rc;
tls_out.certificate_verified = FALSE;
client_verify_callback_called = FALSE;
if (!expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
- &expciphers))
+ &expciphers, errstr))
return FAIL;
/* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
are separated by underscores. So that I can use either form in my tests, and
also for general convenience, we turn underscores into hyphens here. */
-if (expciphers != NULL)
+if (expciphers)
{
uschar *s = expciphers;
- while (*s != 0) { if (*s == '_') *s = '-'; s++; }
+ while (*s) { if (*s == '_') *s = '-'; s++; }
DEBUG(D_tls) debug_printf("required ciphers: %s\n", expciphers);
if (!SSL_CTX_set_cipher_list(client_ctx, CS expciphers))
- return tls_error(US"SSL_CTX_set_cipher_list", host, NULL);
+ return tls_error(US"SSL_CTX_set_cipher_list", host, NULL, errstr);
}
#ifdef EXPERIMENTAL_DANE
verify_callback_client_dane);
if (!DANESSL_library_init())
- return tls_error(US"library init", host, NULL);
+ return tls_error(US"library init", host, NULL, errstr);
if (DANESSL_CTX_init(client_ctx) <= 0)
- return tls_error(US"context init", host, NULL);
+ return tls_error(US"context init", host, NULL, errstr);
}
else
#endif
- if ((rc = tls_client_basic_ctx_init(client_ctx, host, ob, client_static_cbinfo))
- != OK)
+ if ((rc = tls_client_basic_ctx_init(client_ctx, host, ob,
+ client_static_cbinfo, errstr)) != OK)
return rc;
if ((client_ssl = SSL_new(client_ctx)) == NULL)
- return tls_error(US"SSL_new", host, NULL);
+ return tls_error(US"SSL_new", host, NULL, errstr);
SSL_set_session_id_context(client_ssl, sid_ctx, Ustrlen(sid_ctx));
SSL_set_fd(client_ssl, fd);
SSL_set_connect_state(client_ssl);
if (ob->tls_sni)
{
- if (!expand_check(ob->tls_sni, US"tls_sni", &tls_out.sni))
+ if (!expand_check(ob->tls_sni, US"tls_sni", &tls_out.sni, errstr))
return FAIL;
- if (tls_out.sni == NULL)
+ if (!tls_out.sni)
{
DEBUG(D_tls) debug_printf("Setting TLS SNI forced to fail, not sending\n");
}
DEBUG(D_tls) debug_printf("Setting TLS SNI \"%s\"\n", tls_out.sni);
SSL_set_tlsext_host_name(client_ssl, tls_out.sni);
#else
- DEBUG(D_tls)
- debug_printf("OpenSSL at build-time lacked SNI support, ignoring \"%s\"\n",
+ log_write(0, LOG_MAIN, "SNI unusable with this OpenSSL library version; ignoring \"%s\"\n",
tls_out.sni);
#endif
}
#ifdef EXPERIMENTAL_DANE
if (tlsa_dnsa)
- if ((rc = dane_tlsa_load(client_ssl, host, tlsa_dnsa)) != OK)
+ if ((rc = dane_tlsa_load(client_ssl, host, tlsa_dnsa, errstr)) != OK)
return rc;
#endif
}
#endif
-#ifdef EXPERIMENTAL_EVENT
+#ifndef DISABLE_EVENT
client_static_cbinfo->event_action = tb->event_action;
#endif
#endif
if (rc <= 0)
- return tls_error(US"SSL_connect", host, sigalrm_seen ? US"timed out" : NULL);
+ return tls_error(US"SSL_connect", host, sigalrm_seen ? US"timed out" : NULL,
+ errstr);
DEBUG(D_tls) debug_printf("SSL_connect succeeded\n");
-/* Beware anonymous ciphers which lead to server_cert being NULL */
-/*XXX server_cert is never freed... use X509_free() */
-server_cert = SSL_get_peer_certificate (client_ssl);
-if (server_cert)
- {
- tls_out.peerdn = US X509_NAME_oneline(X509_get_subject_name(server_cert),
- CS txt, sizeof(txt));
- tls_out.peerdn = txt; /*XXX a static buffer... */
- }
-else
- tls_out.peerdn = NULL;
+peer_cert(client_ssl, &tls_out, peerdn, sizeof(peerdn));
construct_cipher_name(client_ssl, cipherbuf, sizeof(cipherbuf), &tls_out.bits);
tls_out.cipher = cipherbuf;
+static BOOL
+tls_refill(unsigned lim)
+{
+int error;
+int inbytes;
+
+DEBUG(D_tls) debug_printf("Calling SSL_read(%p, %p, %u)\n", server_ssl,
+ ssl_xfer_buffer, ssl_xfer_buffer_size);
+
+if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
+inbytes = SSL_read(server_ssl, CS ssl_xfer_buffer,
+ MIN(ssl_xfer_buffer_size, lim));
+error = SSL_get_error(server_ssl, inbytes);
+alarm(0);
+
+/* SSL_ERROR_ZERO_RETURN appears to mean that the SSL session has been
+closed down, not that the socket itself has been closed down. Revert to
+non-SSL handling. */
+
+if (error == SSL_ERROR_ZERO_RETURN)
+ {
+ DEBUG(D_tls) debug_printf("Got SSL_ERROR_ZERO_RETURN\n");
+
+ receive_getc = smtp_getc;
+ receive_getbuf = smtp_getbuf;
+ receive_get_cache = smtp_get_cache;
+ receive_ungetc = smtp_ungetc;
+ receive_feof = smtp_feof;
+ receive_ferror = smtp_ferror;
+ receive_smtp_buffered = smtp_buffered;
+
+ SSL_free(server_ssl);
+ server_ssl = NULL;
+ tls_in.active = -1;
+ tls_in.bits = 0;
+ tls_in.cipher = NULL;
+ tls_in.peerdn = NULL;
+ tls_in.sni = NULL;
+
+ return FALSE;
+ }
+
+/* Handle genuine errors */
+
+else if (error == SSL_ERROR_SSL)
+ {
+ ERR_error_string(ERR_get_error(), ssl_errstring);
+ log_write(0, LOG_MAIN, "TLS error (SSL_read): %s", ssl_errstring);
+ ssl_xfer_error = 1;
+ return FALSE;
+ }
+
+else if (error != SSL_ERROR_NONE)
+ {
+ DEBUG(D_tls) debug_printf("Got SSL error %d\n", error);
+ ssl_xfer_error = 1;
+ return FALSE;
+ }
+
+#ifndef DISABLE_DKIM
+dkim_exim_verify_feed(ssl_xfer_buffer, inbytes);
+#endif
+ssl_xfer_buffer_hwm = inbytes;
+ssl_xfer_buffer_lwm = 0;
+return TRUE;
+}
+
+
/*************************************************
* TLS version of getc *
*************************************************/
/* This gets the next byte from the TLS input buffer. If the buffer is empty,
it refills the buffer via the SSL reading function.
-Arguments: none
+Arguments: lim Maximum amount to read/buffer
Returns: the next character or EOF
Only used by the server-side TLS.
*/
int
-tls_getc(void)
+tls_getc(unsigned lim)
{
if (ssl_xfer_buffer_lwm >= ssl_xfer_buffer_hwm)
- {
- int error;
- int inbytes;
+ if (!tls_refill(lim))
+ return ssl_xfer_error ? EOF : smtp_getc(lim);
- DEBUG(D_tls) debug_printf("Calling SSL_read(%p, %p, %u)\n", server_ssl,
- ssl_xfer_buffer, ssl_xfer_buffer_size);
+/* Something in the buffer; return next uschar */
- if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
- inbytes = SSL_read(server_ssl, CS ssl_xfer_buffer, ssl_xfer_buffer_size);
- error = SSL_get_error(server_ssl, inbytes);
- alarm(0);
+return ssl_xfer_buffer[ssl_xfer_buffer_lwm++];
+}
- /* SSL_ERROR_ZERO_RETURN appears to mean that the SSL session has been
- closed down, not that the socket itself has been closed down. Revert to
- non-SSL handling. */
+uschar *
+tls_getbuf(unsigned * len)
+{
+unsigned size;
+uschar * buf;
- if (error == SSL_ERROR_ZERO_RETURN)
+if (ssl_xfer_buffer_lwm >= ssl_xfer_buffer_hwm)
+ if (!tls_refill(*len))
{
- DEBUG(D_tls) debug_printf("Got SSL_ERROR_ZERO_RETURN\n");
-
- receive_getc = smtp_getc;
- receive_ungetc = smtp_ungetc;
- receive_feof = smtp_feof;
- receive_ferror = smtp_ferror;
- receive_smtp_buffered = smtp_buffered;
-
- SSL_free(server_ssl);
- server_ssl = NULL;
- tls_in.active = -1;
- tls_in.bits = 0;
- tls_in.cipher = NULL;
- tls_in.peerdn = NULL;
- tls_in.sni = NULL;
-
- return smtp_getc();
+ if (!ssl_xfer_error) return smtp_getbuf(len);
+ *len = 0;
+ return NULL;
}
- /* Handle genuine errors */
+if ((size = ssl_xfer_buffer_hwm - ssl_xfer_buffer_lwm) > *len)
+ size = *len;
+buf = &ssl_xfer_buffer[ssl_xfer_buffer_lwm];
+ssl_xfer_buffer_lwm += size;
+*len = size;
+return buf;
+}
- else if (error == SSL_ERROR_SSL)
- {
- ERR_error_string(ERR_get_error(), ssl_errstring);
- log_write(0, LOG_MAIN, "TLS error (SSL_read): %s", ssl_errstring);
- ssl_xfer_error = 1;
- return EOF;
- }
-
- else if (error != SSL_ERROR_NONE)
- {
- DEBUG(D_tls) debug_printf("Got SSL error %d\n", error);
- ssl_xfer_error = 1;
- return EOF;
- }
+void
+tls_get_cache()
+{
#ifndef DISABLE_DKIM
- dkim_exim_verify_feed(ssl_xfer_buffer, inbytes);
+int n = ssl_xfer_buffer_hwm - ssl_xfer_buffer_lwm;
+if (n > 0)
+ dkim_exim_verify_feed(ssl_xfer_buffer+ssl_xfer_buffer_lwm, n);
#endif
- ssl_xfer_buffer_hwm = inbytes;
- ssl_xfer_buffer_lwm = 0;
- }
+}
-/* Something in the buffer; return next uschar */
-return ssl_xfer_buffer[ssl_xfer_buffer_lwm++];
+BOOL
+tls_could_read(void)
+{
+return ssl_xfer_buffer_lwm < ssl_xfer_buffer_hwm || SSL_pending(server_ssl) > 0;
}
-
/*************************************************
* Read bytes from TLS channel *
*************************************************/
return -1;
}
else if (error != SSL_ERROR_NONE)
- {
return -1;
- }
return inbytes;
}
is_server channel specifier
buff buffer of data
len number of bytes
+ more further data expected soon
Returns: the number of bytes after a successful write,
-1 after a failed write
*/
int
-tls_write(BOOL is_server, const uschar *buff, size_t len)
+tls_write(BOOL is_server, const uschar *buff, size_t len, BOOL more)
{
-int outbytes;
-int error;
-int left = len;
+int outbytes, error, left;
SSL *ssl = is_server ? server_ssl : client_ssl;
+static gstring * corked = NULL;
-DEBUG(D_tls) debug_printf("tls_do_write(%p, %d)\n", buff, left);
-while (left > 0)
+DEBUG(D_tls) debug_printf("%s(%p, %lu%s)\n", __FUNCTION__,
+ buff, (unsigned long)len, more ? ", more" : "");
+
+/* Lacking a CORK or MSG_MORE facility (such as GnuTLS has) we copy data when
+"more" is notified. This hack is only ok if small amounts are involved AND only
+one stream does it, in one context (i.e. no store reset). Currently it is used
+for the responses to the received SMTP MAIL , RCPT, DATA sequence, only. */
+
+if (is_server && (more || corked))
+ {
+ corked = string_catn(corked, buff, len);
+ if (more)
+ return len;
+ buff = CUS corked->s;
+ len = corked->ptr;
+ corked = NULL;
+ }
+
+for (left = len; left > 0;)
{
DEBUG(D_tls) debug_printf("SSL_write(SSL, %p, %d)\n", buff, left);
outbytes = SSL_write(ssl, CS buff, left);
switch (error)
{
case SSL_ERROR_SSL:
- ERR_error_string(ERR_get_error(), ssl_errstring);
- log_write(0, LOG_MAIN, "TLS error (SSL_write): %s", ssl_errstring);
- return -1;
+ ERR_error_string(ERR_get_error(), ssl_errstring);
+ log_write(0, LOG_MAIN, "TLS error (SSL_write): %s", ssl_errstring);
+ return -1;
case SSL_ERROR_NONE:
- left -= outbytes;
- buff += outbytes;
- break;
+ left -= outbytes;
+ buff += outbytes;
+ break;
case SSL_ERROR_ZERO_RETURN:
- log_write(0, LOG_MAIN, "SSL channel closed on write");
- return -1;
+ log_write(0, LOG_MAIN, "SSL channel closed on write");
+ return -1;
case SSL_ERROR_SYSCALL:
- log_write(0, LOG_MAIN, "SSL_write: (from %s) syscall: %s",
- sender_fullhost ? sender_fullhost : US"<unknown>",
- strerror(errno));
+ log_write(0, LOG_MAIN, "SSL_write: (from %s) syscall: %s",
+ sender_fullhost ? sender_fullhost : US"<unknown>",
+ strerror(errno));
+ return -1;
default:
- log_write(0, LOG_MAIN, "SSL_write error %d", error);
- return -1;
+ log_write(0, LOG_MAIN, "SSL_write error %d", error);
+ return -1;
}
}
return len;
if (!(tls_require_ciphers && *tls_require_ciphers))
return NULL;
-if (!expand_check(tls_require_ciphers, US"tls_require_ciphers", &expciphers))
+if (!expand_check(tls_require_ciphers, US"tls_require_ciphers", &expciphers,
+ &err))
return US"failed to expand tls_require_ciphers";
if (!(expciphers && *expciphers))
if (!SSL_CTX_set_cipher_list(ctx, CS expciphers))
{
ERR_error_string(ERR_get_error(), ssl_errstring);
- err = string_sprintf("SSL_CTX_set_cipher_list(%s) failed", expciphers);
+ err = string_sprintf("SSL_CTX_set_cipher_list(%s) failed: %s",
+ expciphers, ssl_errstring);
}
SSL_CTX_free(ctx);
gettimeofday(&r.tv, NULL);
r.p = getpid();
- RAND_seed((uschar *)(&r), sizeof(r));
+ RAND_seed(US (&r), sizeof(r));
}
/* We're after pseudo-random, not random; if we still don't have enough data
in the internal PRNG then our options are limited. We could sleep and hope
if (i < needed_len)
needed_len = i;
+#ifdef EXIM_HAVE_RAND_PSEUDO
/* We do not care if crypto-strong */
i = RAND_pseudo_bytes(smallbuf, needed_len);
+#else
+i = RAND_bytes(smallbuf, needed_len);
+#endif
+
if (i < 0)
{
DEBUG(D_all)
uschar keep_c;
BOOL adding, item_parsed;
-result = 0L;
+result = SSL_OP_NO_TICKET;
/* Prior to 4.80 we or'd in SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS; removed
* from default because it increases BEAST susceptibility. */
#ifdef SSL_OP_NO_SSLv2
result |= SSL_OP_NO_SSLv2;
#endif
+#ifdef SSL_OP_SINGLE_DH_USE
+result |= SSL_OP_SINGLE_DH_USE;
+#endif
-if (option_spec == NULL)
+if (!option_spec)
{
*results = result;
return TRUE;
keep_c = *end;
*end = '\0';
item_parsed = tls_openssl_one_option_parse(s, &item);
+ *end = keep_c;
if (!item_parsed)
{
DEBUG(D_tls) debug_printf("openssl option setting unrecognised: \"%s\"\n", s);
result |= item;
else
result &= ~item;
- *end = keep_c;
s = end;
}
projects / exim.git / blobdiff