* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2014 */
+/* Copyright (c) University of Cambridge 1995 - 2016 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions for handling an incoming SMTP call. */
#include "exim.h"
+#include <assert.h>
/* Initialize for TCP wrappers if so configured. It appears that the macro
/* Size of buffer for reading SMTP commands. We used to use 512, as defined
by RFC 821. However, RFC 1869 specifies that this must be increased for SMTP
commands that accept arguments, and this in particular applies to AUTH, where
-the data can be quite long. More recently this value was 2048 in Exim;
+the data can be quite long. More recently this value was 2048 in Exim;
however, RFC 4954 (circa 2007) recommends 12288 bytes to handle AUTH. Clients
-such as Thunderbird will send an AUTH with an initial-response for GSSAPI.
-The maximum size of a Kerberos ticket under Windows 2003 is 12000 bytes, and
+such as Thunderbird will send an AUTH with an initial-response for GSSAPI.
+The maximum size of a Kerberos ticket under Windows 2003 is 12000 bytes, and
we need room to handle large base64-encoded AUTHs for GSSAPI.
*/
VRFY_CMD, EXPN_CMD, NOOP_CMD, /* RFC as requiring synchronization */
ETRN_CMD, /* This by analogy with TURN from the RFC */
STARTTLS_CMD, /* Required by the STARTTLS RFC */
+ TLS_AUTH_CMD, /* auto-command at start of SSL */
/* This is a dummy to identify the non-sync commands when pipelining */
MAIL_CMD, RCPT_CMD, RSET_CMD,
+ /* RFC3030 section 2: "After all MAIL and RCPT responses are collected and
+ processed the message is sent using a series of BDAT commands"
+ implies that BDAT should be synchronized. However, we see Google, at least,
+ sending MAIL,RCPT,BDAT-LAST in a single packet, clearly not waiting for
+ processing of the RPCT response(s). We shall do the same, and not require
+ synch for BDAT. */
+
+ BDAT_CMD,
+
/* This is a dummy to identify the non-sync commands when not pipelining */
NON_SYNC_CMD_NON_PIPELINING,
QUIT_CMD, HELP_CMD,
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
PROXY_FAIL_IGNORE_CMD,
#endif
static BOOL rcpt_in_progress;
static int nonmail_command_count;
static BOOL smtp_exit_function_called = 0;
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
static BOOL smtputf8_advertised;
#endif
static int synprot_error_count;
forced TRUE, to allow for the re-authentication that can happen at that point.
QUIT is also "falsely" labelled as a mail command so that it doesn't up the
-count of non-mail commands and possibly provoke an error. */
+count of non-mail commands and possibly provoke an error.
+
+tls_auth is a pseudo-command, never expected in input. It is activated
+on TLS startup and looks for a tls authenticator. */
static smtp_cmd_list cmd_list[] = {
/* name len cmd has_arg is_mail_cmd */
{ "auth", sizeof("auth")-1, AUTH_CMD, TRUE, TRUE },
#ifdef SUPPORT_TLS
{ "starttls", sizeof("starttls")-1, STARTTLS_CMD, FALSE, FALSE },
+ { "tls_auth", 0, TLS_AUTH_CMD, FALSE, TRUE },
#endif
/* If you change anything above here, also fix the definitions below. */
{ "mail from:", sizeof("mail from:")-1, MAIL_CMD, TRUE, TRUE },
{ "rcpt to:", sizeof("rcpt to:")-1, RCPT_CMD, TRUE, TRUE },
{ "data", sizeof("data")-1, DATA_CMD, FALSE, TRUE },
+ { "bdat", sizeof("bdat")-1, BDAT_CMD, TRUE, TRUE },
{ "quit", sizeof("quit")-1, QUIT_CMD, FALSE, TRUE },
{ "noop", sizeof("noop")-1, NOOP_CMD, TRUE, FALSE },
{ "etrn", sizeof("etrn")-1, ETRN_CMD, TRUE, FALSE },
#define CMD_LIST_EHLO 2
#define CMD_LIST_AUTH 3
#define CMD_LIST_STARTTLS 4
+#define CMD_LIST_TLS_AUTH 5
/* This list of names is used for performing the smtp_no_mail logging action.
It must be kept in step with the SCH_xxx enumerations. */
static uschar *smtp_names[] =
{
- US"NONE", US"AUTH", US"DATA", US"EHLO", US"ETRN", US"EXPN", US"HELO",
- US"HELP", US"MAIL", US"NOOP", US"QUIT", US"RCPT", US"RSET", US"STARTTLS",
- US"VRFY" };
+ US"NONE", US"AUTH", US"DATA", US"BDAT", US"EHLO", US"ETRN", US"EXPN",
+ US"HELO", US"HELP", US"MAIL", US"NOOP", US"QUIT", US"RCPT", US"RSET",
+ US"STARTTLS", US"VRFY" };
static uschar *protocols_local[] = {
US"local-smtp", /* HELO */
/* Sanity check and validate optional args to MAIL FROM: envelope */
enum {
+ ENV_MAIL_OPT_NULL,
ENV_MAIL_OPT_SIZE, ENV_MAIL_OPT_BODY, ENV_MAIL_OPT_AUTH,
#ifndef DISABLE_PRDR
ENV_MAIL_OPT_PRDR,
#endif
ENV_MAIL_OPT_RET, ENV_MAIL_OPT_ENVID,
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
ENV_MAIL_OPT_UTF8,
#endif
- ENV_MAIL_OPT_NULL
};
typedef struct {
uschar * name; /* option requested during MAIL cmd */
#endif
{ US"RET", ENV_MAIL_OPT_RET, TRUE },
{ US"ENVID", ENV_MAIL_OPT_ENVID, TRUE },
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
{ US"SMTPUTF8",ENV_MAIL_OPT_UTF8, FALSE }, /* rfc6531 */
#endif
- { US"NULL", ENV_MAIL_OPT_NULL, FALSE }
+ /* keep this the last entry */
+ { US"NULL", ENV_MAIL_OPT_NULL, FALSE },
};
/* When reading SMTP from a remote host, we have to use our own versions of the
static int smtp_had_error;
+/* forward declarations */
+int bdat_ungetc(int ch);
+static int smtp_read_command(BOOL check_sync);
+static int synprot_error(int type, int code, uschar *data, uschar *errmess);
+static void smtp_quit_handler(uschar **, uschar **);
+static void smtp_rset_handler(void);
+
/*************************************************
* SMTP version of getc() *
*************************************************/
if (smtp_inptr >= smtp_inend)
{
int rc, save_errno;
+ if (!smtp_out) return EOF;
fflush(smtp_out);
if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
rc = read(fileno(smtp_in), smtp_inbuffer, in_buffer_size);
return *smtp_inptr++;
}
+void
+smtp_get_cache(void)
+{
+#ifndef DISABLE_DKIM
+int n = smtp_inend - smtp_inptr;
+if (n > 0)
+ dkim_exim_verify_feed(smtp_inptr, n);
+#endif
+}
+
+
+/* Get a byte from the smtp input, in CHUNKING mode. Handle ack of the
+previous BDAT chunk and getting new ones when we run out. Uses the
+underlying smtp_getc or tls_getc both for that and for getting the
+(buffered) data byte. EOD signals (an expected) no further data.
+ERR signals a protocol error, and EOF a closed input stream.
+
+Called from read_bdat_smtp() in receive.c for the message body, but also
+by the headers read loop in receive_msg(); manipulates chunking_state
+to handle the BDAT command/response.
+Placed here due to the correlation with the above smtp_getc(), which it wraps,
+and also by the need to do smtp command/response handling.
+
+Arguments: none
+Returns: the next character or ERR, EOD or EOF
+*/
+
+int
+bdat_getc(void)
+{
+uschar * user_msg = NULL;
+uschar * log_msg;
+
+for(;;)
+ {
+ if (chunking_data_left-- > 0)
+ return lwr_receive_getc();
+
+ receive_getc = lwr_receive_getc;
+ receive_ungetc = lwr_receive_ungetc;
+
+ /* If not the last, ack the received chunk. The last response is delayed
+ until after the data ACL decides on it */
+
+ if (chunking_state == CHUNKING_LAST)
+ {
+#ifndef DISABLE_DKIM
+ dkim_exim_verify_feed(NULL, 0); /* notify EOD */
+#endif
+ return EOD;
+ }
+
+ chunking_state = CHUNKING_OFFERED;
+ smtp_printf("250 %u byte chunk received\r\n", chunking_datasize);
+
+ /* Expect another BDAT cmd from input. RFC 3030 says nothing about
+ QUIT, RSET or NOOP but handling them seems obvious */
+
+next_cmd:
+ switch(smtp_read_command(TRUE))
+ {
+ default:
+ (void) synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"only BDAT permissible after non-LAST BDAT");
+
+ repeat_until_rset:
+ switch(smtp_read_command(TRUE))
+ {
+ case QUIT_CMD: smtp_quit_handler(&user_msg, &log_msg); /*FALLTHROUGH */
+ case EOF_CMD: return EOF;
+ case RSET_CMD: smtp_rset_handler(); return ERR;
+ default: if (synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"only RSET accepted now") > 0)
+ return EOF;
+ goto repeat_until_rset;
+ }
+
+ case QUIT_CMD:
+ smtp_quit_handler(&user_msg, &log_msg);
+ /*FALLTHROUGH*/
+ case EOF_CMD:
+ return EOF;
+
+ case RSET_CMD:
+ smtp_rset_handler();
+ return ERR;
+
+ case NOOP_CMD:
+ HAD(SCH_NOOP);
+ smtp_printf("250 OK\r\n");
+ goto next_cmd;
+
+ case BDAT_CMD:
+ {
+ int n;
+
+ if (sscanf(CS smtp_cmd_data, "%u %n", &chunking_datasize, &n) < 1)
+ {
+ (void) synprot_error(L_smtp_protocol_error, 501, NULL,
+ US"missing size for BDAT command");
+ return ERR;
+ }
+ chunking_state = strcmpic(smtp_cmd_data+n, US"LAST") == 0
+ ? CHUNKING_LAST : CHUNKING_ACTIVE;
+ chunking_data_left = chunking_datasize;
+
+ if (chunking_datasize == 0)
+ if (chunking_state == CHUNKING_LAST)
+ return EOD;
+ else
+ {
+ (void) synprot_error(L_smtp_protocol_error, 504, NULL,
+ US"zero size for BDAT command");
+ goto repeat_until_rset;
+ }
+
+ receive_getc = bdat_getc;
+ receive_ungetc = bdat_ungetc;
+ break; /* to top of main loop */
+ }
+ }
+ }
+}
+
+static void
+bdat_flush_data(void)
+{
+while (chunking_data_left-- > 0)
+ if (lwr_receive_getc() < 0)
+ break;
+
+receive_getc = lwr_receive_getc;
+receive_ungetc = lwr_receive_ungetc;
+
+if (chunking_state != CHUNKING_LAST)
+ chunking_state = CHUNKING_OFFERED;
+}
+
+
/*************************************************
int
smtp_ungetc(int ch)
{
-*(--smtp_inptr) = ch;
+*--smtp_inptr = ch;
return ch;
}
+int
+bdat_ungetc(int ch)
+{
+chunking_data_left++;
+return lwr_receive_ungetc(ch);
+}
+
/*************************************************
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/*************************************************
* Restore socket timeout to previous value *
*************************************************/
/* Cannot configure local connection as a proxy inbound */
if (sender_host_address == NULL) return proxy_session;
-rc = verify_check_this_host(&proxy_required_hosts, NULL, NULL,
+rc = verify_check_this_host(CUSS &hosts_proxy, NULL, NULL,
sender_host_address, NULL);
if (rc == OK)
{
DEBUG(D_receive) debug_printf("Invalid %s source IP\n", iptype);
return ERRNO_PROXYFAIL;
}
- proxy_host_address = sender_host_address;
+ proxy_local_address = sender_host_address;
sender_host_address = string_copy(US tmpip);
tmpport = ntohs(hdr.v2.addr.ip4.src_port);
- proxy_host_port = sender_host_port;
+ proxy_local_port = sender_host_port;
sender_host_port = tmpport;
/* Save dest ip/port */
tmpaddr.sin_addr.s_addr = hdr.v2.addr.ip4.dst_addr;
DEBUG(D_receive) debug_printf("Invalid %s dest port\n", iptype);
return ERRNO_PROXYFAIL;
}
- proxy_target_address = string_copy(US tmpip);
+ proxy_external_address = string_copy(US tmpip);
tmpport = ntohs(hdr.v2.addr.ip4.dst_port);
- proxy_target_port = tmpport;
+ proxy_external_port = tmpport;
goto done;
case 0x21: /* TCPv6 address type */
iptype = US"IPv6";
DEBUG(D_receive) debug_printf("Invalid %s source IP\n", iptype);
return ERRNO_PROXYFAIL;
}
- proxy_host_address = sender_host_address;
+ proxy_local_address = sender_host_address;
sender_host_address = string_copy(US tmpip6);
tmpport = ntohs(hdr.v2.addr.ip6.src_port);
- proxy_host_port = sender_host_port;
+ proxy_local_port = sender_host_port;
sender_host_port = tmpport;
/* Save dest ip/port */
memmove(tmpaddr6.sin6_addr.s6_addr, hdr.v2.addr.ip6.dst_addr, 16);
DEBUG(D_receive) debug_printf("Invalid %s dest port\n", iptype);
return ERRNO_PROXYFAIL;
}
- proxy_target_address = string_copy(US tmpip6);
+ proxy_external_address = string_copy(US tmpip6);
tmpport = ntohs(hdr.v2.addr.ip6.dst_port);
- proxy_target_port = tmpport;
+ proxy_external_port = tmpport;
goto done;
default:
DEBUG(D_receive)
debug_printf("Proxied src arg is not an %s address\n", iptype);
goto proxyfail;
}
- proxy_host_address = sender_host_address;
+ proxy_local_address = sender_host_address;
sender_host_address = p;
p = sp + 1;
if ((sp = Ustrchr(p, ' ')) == NULL)
debug_printf("Proxy dest arg is not an %s address\n", iptype);
goto proxyfail;
}
- proxy_target_address = p;
+ proxy_external_address = p;
p = sp + 1;
if ((sp = Ustrchr(p, ' ')) == NULL)
{
debug_printf("Proxied src port '%s' not an integer\n", p);
goto proxyfail;
}
- proxy_host_port = sender_host_port;
+ proxy_local_port = sender_host_port;
sender_host_port = tmp_port;
p = sp + 1;
if ((sp = Ustrchr(p, '\0')) == NULL)
debug_printf("Proxy dest port '%s' not an integer\n", p);
goto proxyfail;
}
- proxy_target_port = tmp_port;
+ proxy_external_port = tmp_port;
/* Already checked for /r /n above. Good V1 header received. */
goto done;
}
for (p = cmd_list; p < cmd_list_end; p++)
{
- #ifdef EXPERIMENTAL_PROXY
+ #ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
if (proxy_session && proxy_session_failed)
{
continue;
}
#endif
- if (strncmpic(smtp_cmd_buffer, US p->name, p->len) == 0 &&
- (smtp_cmd_buffer[p->len-1] == ':' || /* "mail from:" or "rcpt to:" */
- smtp_cmd_buffer[p->len] == 0 ||
- smtp_cmd_buffer[p->len] == ' '))
+ if ( p->len
+ && strncmpic(smtp_cmd_buffer, US p->name, p->len) == 0
+ && ( smtp_cmd_buffer[p->len-1] == ':' /* "mail from:" or "rcpt to:" */
+ || smtp_cmd_buffer[p->len] == 0
+ || smtp_cmd_buffer[p->len] == ' '
+ ) )
{
if (smtp_inptr < smtp_inend && /* Outstanding input */
p->cmd < sync_cmd_limit && /* Command should sync */
}
}
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
if (proxy_session && proxy_session_failed)
return PROXY_FAIL_IGNORE_CMD;
receive_swallow_smtp();
smtp_printf("421 %s\r\n", message);
-for (;;)
+for (;;) switch(smtp_read_command(FALSE))
{
- switch(smtp_read_command(FALSE))
- {
- case EOF_CMD:
- return;
+ case EOF_CMD:
+ return;
- case QUIT_CMD:
- smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
- mac_smtp_fflush();
- return;
+ case QUIT_CMD:
+ smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
+ mac_smtp_fflush();
+ return;
- case RSET_CMD:
- smtp_printf("250 Reset OK\r\n");
- break;
+ case RSET_CMD:
+ smtp_printf("250 Reset OK\r\n");
+ break;
- default:
- smtp_printf("421 %s\r\n", message);
- break;
- }
+ default:
+ smtp_printf("421 %s\r\n", message);
+ break;
}
}
if (is_inetd)
return string_sprintf("SMTP connection from %s (via inetd)", hostname);
-if ((log_extra_selector & LX_incoming_interface) != 0 &&
- interface_address != NULL)
+if (LOGGING(incoming_interface) && interface_address != NULL)
return string_sprintf("SMTP connection from %s I=[%s]:%d", hostname,
interface_address, interface_port);
int size = sizep ? *sizep : 0;
int ptr = ptrp ? *ptrp : 0;
- if ((log_extra_selector & LX_tls_cipher) != 0 && tls_in.cipher != NULL)
+ if (LOGGING(tls_cipher) && tls_in.cipher != NULL)
s = string_append(s, &size, &ptr, 2, US" X=", tls_in.cipher);
- if ((log_extra_selector & LX_tls_certificate_verified) != 0 &&
- tls_in.cipher != NULL)
+ if (LOGGING(tls_certificate_verified) && tls_in.cipher != NULL)
s = string_append(s, &size, &ptr, 2, US" CV=",
tls_in.certificate_verified? "yes":"no");
- if ((log_extra_selector & LX_tls_peerdn) != 0 && tls_in.peerdn != NULL)
+ if (LOGGING(tls_peerdn) && tls_in.peerdn != NULL)
s = string_append(s, &size, &ptr, 3, US" DN=\"",
string_printing(tls_in.peerdn), US"\"");
- if ((log_extra_selector & LX_tls_sni) != 0 && tls_in.sni != NULL)
+ if (LOGGING(tls_sni) && tls_in.sni != NULL)
s = string_append(s, &size, &ptr, 3, US" SNI=\"",
string_printing(tls_in.sni), US"\"");
int size, ptr, i;
uschar *s, *sep;
-if (smtp_mailcmd_count > 0 || (log_extra_selector & LX_smtp_no_mail) == 0)
+if (smtp_mailcmd_count > 0 || !LOGGING(smtp_no_mail))
return;
s = NULL;
memset(sender_address_cache, 0, sizeof(sender_address_cache));
memset(sender_domain_cache, 0, sizeof(sender_domain_cache));
-prdr_requested = FALSE;
-
-/* Reset the DSN flags */
-dsn_ret = 0;
-dsn_envid = NULL;
-
authenticated_sender = NULL;
#ifdef EXPERIMENTAL_BRIGHTMAIL
bmi_run = 0;
dkim_disable_verify = FALSE;
dkim_collect_input = FALSE;
#endif
+dsn_ret = 0;
+dsn_envid = NULL;
+#ifndef DISABLE_PRDR
+prdr_requested = FALSE;
+#endif
#ifdef EXPERIMENTAL_SPF
spf_header_comment = NULL;
spf_received = NULL;
spf_result = NULL;
spf_smtp_comment = NULL;
#endif
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
message_smtputf8 = FALSE;
#endif
body_linecount = body_zerocount = 0;
/* Apply SMTP rewrite, then extract address. Don't allow "<>" as a
recipient address */
- recipient = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules) : smtp_cmd_data;
+ recipient = rewrite_existflags & rewrite_smtp
+ ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
- /* rfc821_domains = TRUE; << no longer needed */
recipient = parse_extract_address(recipient, &errmess, &start, &end,
&recipient_domain, FALSE);
- /* rfc821_domains = FALSE; << no longer needed */
- if (recipient == NULL)
+ if (!recipient)
/* The function moan_smtp_batch() does not return. */
moan_smtp_batch(smtp_cmd_buffer, "501 %s", errmess);
sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING;
smtp_exit_function_called = FALSE; /* For avoiding loop in not-quit exit */
-memset(sender_host_cache, 0, sizeof(sender_host_cache));
-
/* If receiving by -bs from a trusted user, or testing with -bh, we allow
authentication settings from -oMaa to remain in force. */
tls_advertised = FALSE;
#endif
dsn_advertised = FALSE;
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
smtputf8_advertised = FALSE;
#endif
/* Allow for trailing 0 in the command and data buffers. */
-smtp_cmd_buffer = (uschar *)malloc(2*smtp_cmd_buffer_size + 2);
-if (smtp_cmd_buffer == NULL)
+if (!(smtp_cmd_buffer = US malloc(2*smtp_cmd_buffer_size + 2)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE,
"malloc() failed for SMTP command buffer");
+
smtp_cmd_buffer[0] = 0;
smtp_data_buffer = smtp_cmd_buffer + smtp_cmd_buffer_size + 1;
if (smtp_batched_input)
{
- if (received_protocol == NULL) received_protocol = US"local-bsmtp";
+ if (!received_protocol) received_protocol = US"local-bsmtp";
}
/* For non-batched SMTP input, the protocol setting is forced here. It will be
/* Set up the buffer for inputting using direct read() calls, and arrange to
call the local functions instead of the standard C ones. */
-smtp_inbuffer = (uschar *)malloc(in_buffer_size);
-if (smtp_inbuffer == NULL)
+if (!(smtp_inbuffer = (uschar *)malloc(in_buffer_size)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "malloc() failed for SMTP input buffer");
+
receive_getc = smtp_getc;
+receive_get_cache = smtp_get_cache;
receive_ungetc = smtp_ungetc;
receive_feof = smtp_feof;
receive_ferror = smtp_ferror;
if (smtp_batched_input) return TRUE;
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/* If valid Proxy Protocol source is connecting, set up session.
* Failure will not allow any SMTP function other than QUIT. */
proxy_session = FALSE;
proxy_session_failed = FALSE;
if (check_proxy_protocol_host())
- {
if (setup_proxy_protocol_host() == FALSE)
{
proxy_session_failed = TRUE;
(void)host_name_lookup();
host_build_sender_fullhost();
}
- }
#endif
/* Run the ACL if it exists */
user_msg = NULL;
-if (acl_smtp_connect != NULL)
+if (acl_smtp_connect)
{
int rc;
- rc = acl_check(ACL_WHERE_CONNECT, NULL, acl_smtp_connect, &user_msg,
- &log_msg);
- if (rc != OK)
+ if ((rc = acl_check(ACL_WHERE_CONNECT, NULL, acl_smtp_connect, &user_msg,
+ &log_msg)) != OK)
{
- (void)smtp_handle_acl_fail(ACL_WHERE_CONNECT, rc, user_msg, log_msg);
+ (void) smtp_handle_acl_fail(ACL_WHERE_CONNECT, rc, user_msg, log_msg);
return FALSE;
}
}
esc = US""; /* Default extended status code */
esclen = 0; /* Length of esc */
-if (user_msg == NULL)
+if (!user_msg)
{
- s = expand_string(smtp_banner);
- if (s == NULL)
+ if (!(s = expand_string(smtp_banner)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Expansion of \"%s\" (smtp_banner) "
"failed: %s", smtp_banner, expand_string_message);
}
{
int codelen = 3;
s = user_msg;
- smtp_message_code(&code, &codelen, &s, NULL);
+ smtp_message_code(&code, &codelen, &s, NULL, TRUE);
if (codelen > 4)
{
esc = code + 4;
{
int len;
uschar *linebreak = Ustrchr(p, '\n');
- ss = string_cat(ss, &size, &ptr, code, 3);
+ ss = string_catn(ss, &size, &ptr, code, 3);
if (linebreak == NULL)
{
len = Ustrlen(p);
- ss = string_cat(ss, &size, &ptr, US" ", 1);
+ ss = string_catn(ss, &size, &ptr, US" ", 1);
}
else
{
len = linebreak - p;
- ss = string_cat(ss, &size, &ptr, US"-", 1);
+ ss = string_catn(ss, &size, &ptr, US"-", 1);
}
- ss = string_cat(ss, &size, &ptr, esc, esclen);
- ss = string_cat(ss, &size, &ptr, p, len);
- ss = string_cat(ss, &size, &ptr, US"\r\n", 2);
+ ss = string_catn(ss, &size, &ptr, esc, esclen);
+ ss = string_catn(ss, &size, &ptr, p, len);
+ ss = string_catn(ss, &size, &ptr, US"\r\n", 2);
p += len;
if (linebreak != NULL) p++;
}
incomplete_transaction_log(uschar *what)
{
if (sender_address == NULL || /* No transaction in progress */
- (log_write_selector & L_smtp_incomplete_transaction) == 0 /* Not logging */
- ) return;
+ !LOGGING(smtp_incomplete_transaction))
+ return;
/* Build list of recipients for logging */
codelen length of smtp code; if > 4 there's an ESC
msg message text
log_msg optional log message, to be adjusted with the new SMTP code
+ check_valid if true, verify the response code
Returns: nothing
*/
void
-smtp_message_code(uschar **code, int *codelen, uschar **msg, uschar **log_msg)
+smtp_message_code(uschar **code, int *codelen, uschar **msg, uschar **log_msg,
+ BOOL check_valid)
{
int n;
int ovector[3];
-if (msg == NULL || *msg == NULL) return;
+if (!msg || !*msg) return;
-n = pcre_exec(regex_smtp_code, NULL, CS *msg, Ustrlen(*msg), 0,
- PCRE_EOPT, ovector, sizeof(ovector)/sizeof(int));
-if (n < 0) return;
+if ((n = pcre_exec(regex_smtp_code, NULL, CS *msg, Ustrlen(*msg), 0,
+ PCRE_EOPT, ovector, sizeof(ovector)/sizeof(int))) < 0) return;
-if ((*msg)[0] != (*code)[0])
+if (check_valid && (*msg)[0] != (*code)[0])
{
log_write(0, LOG_MAIN|LOG_PANIC, "configured error code starts with "
"incorrect digit (expected %c) in \"%s\"", (*code)[0], *msg);
(aka RFC 2821) has concluded that the response should be 252 in the disabled
state, because there are broken clients that try VRFY before RCPT. A 5xx
response should be given only when the address is positively known to be
-undeliverable. Sigh. Also, for ETRN, 458 is given on refusal, and for AUTH,
-503.
+undeliverable. Sigh. We return 252 if there is no VRFY ACL or it provides
+no explicit code, but if there is one we let it know best.
+Also, for ETRN, 458 is given on refusal, and for AUTH, 503.
From Exim 4.63, it is possible to override the response code details by
providing a suitable response code string at the start of the message provided
in user_msg. The code's first digit is checked for validity.
Arguments:
- where where the ACL was called from
- rc the failure code
- user_msg a message that can be included in an SMTP response
- log_msg a message for logging
+ where where the ACL was called from
+ rc the failure code
+ user_msg a message that can be included in an SMTP response
+ log_msg a message for logging
Returns: 0 in most cases
2 if the failure code was FAIL_DROP, in which case the
uschar *sender_info = US"";
uschar *what =
#ifdef WITH_CONTENT_SCAN
- (where == ACL_WHERE_MIME)? US"during MIME ACL checks" :
+ where == ACL_WHERE_MIME ? US"during MIME ACL checks" :
#endif
- (where == ACL_WHERE_PREDATA)? US"DATA" :
- (where == ACL_WHERE_DATA)? US"after DATA" :
+ where == ACL_WHERE_PREDATA ? US"DATA" :
+ where == ACL_WHERE_DATA ? US"after DATA" :
#ifndef DISABLE_PRDR
- (where == ACL_WHERE_PRDR)? US"after DATA PRDR" :
+ where == ACL_WHERE_PRDR ? US"after DATA PRDR" :
#endif
- (smtp_cmd_data == NULL)?
- string_sprintf("%s in \"connect\" ACL", acl_wherenames[where]) :
- string_sprintf("%s %s", acl_wherenames[where], smtp_cmd_data);
+ smtp_cmd_data ?
+ string_sprintf("%s %s", acl_wherenames[where], smtp_cmd_data) :
+ string_sprintf("%s in \"connect\" ACL", acl_wherenames[where]);
if (drop) rc = FAIL;
/* Set the default SMTP code, and allow a user message to change it. */
-smtp_code = (rc != FAIL)? US"451" : acl_wherecodes[where];
-smtp_message_code(&smtp_code, &codelen, &user_msg, &log_msg);
+smtp_code = rc == FAIL ? acl_wherecodes[where] : US"451";
+smtp_message_code(&smtp_code, &codelen, &user_msg, &log_msg,
+ where != ACL_WHERE_VRFY);
/* We used to have sender_address here; however, there was a bug that was not
updating sender_address after a rewrite during a verify. When this bug was
setflag(sender_verified_failed, af_sverify_told);
- if (rc != FAIL || (log_extra_selector & LX_sender_verify_fail) != 0)
+ if (rc != FAIL || LOGGING(sender_verify_fail))
log_write(0, LOG_MAIN|LOG_REJECT, "%s sender verify %s for <%s>%s",
host_and_ident(TRUE),
((sender_verified_failed->special_action & 255) == DEFER)? "defer":"fail",
/* Sort out text for logging */
-log_msg = (log_msg == NULL)? US"" : string_sprintf(": %s", log_msg);
-lognl = Ustrchr(log_msg, '\n');
-if (lognl != NULL) *lognl = 0;
+log_msg = log_msg ? string_sprintf(": %s", log_msg) : US"";
+if ((lognl = Ustrchr(log_msg, '\n'))) *lognl = 0;
/* Send permanent failure response to the command, but the code used isn't
always a 5xx one - see comments at the start of this function. If the original
rc was FAIL_DROP we drop the connection and yield 2. */
-if (rc == FAIL) smtp_respond(smtp_code, codelen, TRUE, (user_msg == NULL)?
- US"Administrative prohibition" : user_msg);
+if (rc == FAIL)
+ smtp_respond(smtp_code, codelen, TRUE,
+ user_msg ? user_msg : US"Administrative prohibition");
/* Send temporary failure response to the command. Don't give any details,
unless acl_temp_details is set. This is TRUE for a callout defer, a "defer"
be re-implemented in a tidier fashion. */
else
- {
- if (acl_temp_details && user_msg != NULL)
+ if (acl_temp_details && user_msg)
{
- if (smtp_return_error_details &&
- sender_verified_failed != NULL &&
- sender_verified_failed->message != NULL)
- {
+ if ( smtp_return_error_details
+ && sender_verified_failed
+ && sender_verified_failed->message
+ )
smtp_respond(smtp_code, codelen, FALSE, sender_verified_failed->message);
- }
+
smtp_respond(smtp_code, codelen, TRUE, user_msg);
}
else
smtp_respond(smtp_code, codelen, TRUE,
US"Temporary local problem - please try later");
- }
/* Log the incident to the logs that are specified by log_reject_target
(default main, reject). This can be empty to suppress logging of rejections. If
if (log_reject_target != 0)
{
#ifdef SUPPORT_TLS
- uschar * s = s_tlslog(NULL, NULL, NULL);
- if (!s) s = US"";
+ uschar * tls = s_tlslog(NULL, NULL, NULL);
+ if (!tls) tls = US"";
#else
- uschar * s = US"";
+ uschar * tls = US"";
#endif
- log_write(0, log_reject_target, "%s%s %s%srejected %s%s",
- host_and_ident(TRUE), s,
- sender_info, (rc == FAIL)? US"" : US"temporarily ", what, log_msg);
+ log_write(where == ACL_WHERE_CONNECT ? L_connection_reject : 0,
+ log_reject_target, "%s%s%s %s%srejected %s%s",
+ LOGGING(dnssec) && sender_host_dnssec ? US" DS" : US"",
+ host_and_ident(TRUE),
+ tls,
+ sender_info,
+ rc == FAIL ? US"" : US"temporarily ",
+ what, log_msg);
}
if (!drop) return 0;
/* Call the not-QUIT ACL, if there is one, unless no reason is given. */
-if (acl_smtp_notquit != NULL && reason != NULL)
+if (acl_smtp_notquit && reason)
{
smtp_notquit_reason = reason;
- rc = acl_check(ACL_WHERE_NOTQUIT, NULL, acl_smtp_notquit, &user_msg,
- &log_msg);
- if (rc == ERROR)
+ if ((rc = acl_check(ACL_WHERE_NOTQUIT, NULL, acl_smtp_notquit, &user_msg,
+ &log_msg)) == ERROR)
log_write(0, LOG_MAIN|LOG_PANIC, "ACL for not-QUIT returned ERROR: %s",
log_msg);
}
warning, just in case. Note that string_vformat() still leaves a complete
string, even if it is incomplete. */
-if (code != NULL && defaultrespond != NULL)
+if (code && defaultrespond)
{
- if (user_msg == NULL)
+ if (user_msg)
+ smtp_respond(code, 3, TRUE, user_msg);
+ else
{
uschar buffer[128];
va_list ap;
smtp_printf("%s %s\r\n", code, buffer);
va_end(ap);
}
- else
- smtp_respond(code, 3, TRUE, user_msg);
mac_smtp_fflush();
}
}
smtp_user_msg(uschar *code, uschar *user_msg)
{
int len = 3;
-smtp_message_code(&code, &len, &user_msg, NULL);
+smtp_message_code(&code, &len, &user_msg, NULL, TRUE);
smtp_respond(code, len, TRUE, user_msg);
}
+static int
+smtp_in_auth(auth_instance *au, uschar ** s, uschar ** ss)
+{
+const uschar *set_id = NULL;
+int rc, i;
+
+/* Run the checking code, passing the remainder of the command line as
+data. Initials the $auth<n> variables as empty. Initialize $0 empty and set
+it as the only set numerical variable. The authenticator may set $auth<n>
+and also set other numeric variables. The $auth<n> variables are preferred
+nowadays; the numerical variables remain for backwards compatibility.
+
+Afterwards, have a go at expanding the set_id string, even if
+authentication failed - for bad passwords it can be useful to log the
+userid. On success, require set_id to expand and exist, and put it in
+authenticated_id. Save this in permanent store, as the working store gets
+reset at HELO, RSET, etc. */
+
+for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL;
+expand_nmax = 0;
+expand_nlength[0] = 0; /* $0 contains nothing */
+
+rc = (au->info->servercode)(au, smtp_cmd_data);
+if (au->set_id) set_id = expand_string(au->set_id);
+expand_nmax = -1; /* Reset numeric variables */
+for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL; /* Reset $auth<n> */
+
+/* The value of authenticated_id is stored in the spool file and printed in
+log lines. It must not contain binary zeros or newline characters. In
+normal use, it never will, but when playing around or testing, this error
+can (did) happen. To guard against this, ensure that the id contains only
+printing characters. */
+
+if (set_id) set_id = string_printing(set_id);
+
+/* For the non-OK cases, set up additional logging data if set_id
+is not empty. */
+
+if (rc != OK)
+ set_id = set_id && *set_id
+ ? string_sprintf(" (set_id=%s)", set_id) : US"";
+
+/* Switch on the result */
+
+switch(rc)
+ {
+ case OK:
+ if (!au->set_id || set_id) /* Complete success */
+ {
+ if (set_id) authenticated_id = string_copy_malloc(set_id);
+ sender_host_authenticated = au->name;
+ authentication_failed = FALSE;
+ authenticated_fail_id = NULL; /* Impossible to already be set? */
+
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [pextend + pauthed + (tls_in.active >= 0 ? pcrpted:0)];
+ *s = *ss = US"235 Authentication succeeded";
+ authenticated_by = au;
+ break;
+ }
+
+ /* Authentication succeeded, but we failed to expand the set_id string.
+ Treat this as a temporary error. */
+
+ auth_defer_msg = expand_string_message;
+ /* Fall through */
+
+ case DEFER:
+ if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
+ *s = string_sprintf("435 Unable to authenticate at present%s",
+ auth_defer_user_msg);
+ *ss = string_sprintf("435 Unable to authenticate at present%s: %s",
+ set_id, auth_defer_msg);
+ break;
+
+ case BAD64:
+ *s = *ss = US"501 Invalid base64 data";
+ break;
+
+ case CANCELLED:
+ *s = *ss = US"501 Authentication cancelled";
+ break;
+
+ case UNEXPECTED:
+ *s = *ss = US"553 Initial data not expected";
+ break;
+
+ case FAIL:
+ if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
+ *s = US"535 Incorrect authentication data";
+ *ss = string_sprintf("535 Incorrect authentication data%s", set_id);
+ break;
+
+ default:
+ if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
+ *s = US"435 Internal error";
+ *ss = string_sprintf("435 Internal error%s: return %d from authentication "
+ "check", set_id, rc);
+ break;
+ }
+
+return rc;
+}
+
+
+
+
+
+static int
+qualify_recipient(uschar ** recipient, uschar * smtp_cmd_data, uschar * tag)
+{
+int rd;
+if (allow_unqualified_recipient || strcmpic(*recipient, US"postmaster") == 0)
+ {
+ DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
+ *recipient);
+ rd = Ustrlen(recipient) + 1;
+ *recipient = rewrite_address_qualify(*recipient, TRUE);
+ return rd;
+ }
+smtp_printf("501 %s: recipient address must contain a domain\r\n",
+ smtp_cmd_data);
+log_write(L_smtp_syntax_error,
+ LOG_MAIN|LOG_REJECT, "unqualified %s rejected: <%s> %s%s",
+ tag, *recipient, host_and_ident(TRUE), host_lookup_msg);
+return 0;
+}
+
+
+
+
+static void
+smtp_quit_handler(uschar ** user_msgp, uschar ** log_msgp)
+{
+HAD(SCH_QUIT);
+incomplete_transaction_log(US"QUIT");
+if (acl_smtp_quit)
+ {
+ int rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, user_msgp, log_msgp);
+ if (rc == ERROR)
+ log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
+ *log_msgp);
+ }
+if (*user_msgp)
+ smtp_respond(US"221", 3, TRUE, *user_msgp);
+else
+ smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
+
+#ifdef SUPPORT_TLS
+tls_close(TRUE, TRUE);
+#endif
+
+log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
+ smtp_get_connection_info());
+}
+
+
+static void
+smtp_rset_handler(void)
+{
+HAD(SCH_RSET);
+incomplete_transaction_log(US"RSET");
+smtp_printf("250 Reset OK\r\n");
+cmd_list[CMD_LIST_RSET].is_mail_cmd = FALSE;
+}
+
+
+
/*************************************************
* Initialize for SMTP incoming message *
*************************************************/
smtp_reset(reset_point);
message_ended = END_NOTSTARTED;
+chunking_state = chunking_offered ? CHUNKING_OFFERED : CHUNKING_NOT_OFFERED;
+
cmd_list[CMD_LIST_RSET].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_HELO].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
#ifdef SUPPORT_TLS
cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = TRUE;
+cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
#endif
/* Set the local signal handler for SIGTERM - it tries to end off tidily */
uschar *user_msg = NULL;
uschar *recipient = NULL;
uschar *hello = NULL;
- const uschar *set_id = NULL;
uschar *s, *ss;
BOOL was_rej_mail = FALSE;
BOOL was_rcpt = FALSE;
pid_t pid;
int start, end, sender_domain, recipient_domain;
int ptr, size, rc;
- int c, i;
+ int c;
auth_instance *au;
uschar *orcpt = NULL;
int flags;
+#if defined(SUPPORT_TLS) && defined(AUTH_TLS)
+ /* Check once per STARTTLS or SSL-on-connect for a TLS AUTH */
+ if ( tls_in.active >= 0
+ && tls_in.peercert
+ && tls_in.certificate_verified
+ && cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd
+ )
+ {
+ cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = FALSE;
+ if ( acl_smtp_auth
+ && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
+ &user_msg, &log_msg)) != OK
+ )
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
+ continue;
+ }
+
+ for (au = auths; au; au = au->next)
+ if (strcmpic(US"tls", au->driver_name) == 0)
+ {
+ smtp_cmd_data = NULL;
+
+ if (smtp_in_auth(au, &s, &ss) == OK)
+ { DEBUG(D_auth) debug_printf("tls auth succeeded\n"); }
+ else
+ { DEBUG(D_auth) debug_printf("tls auth not succeeded\n"); }
+ break;
+ }
+ }
+#endif
+
switch(smtp_read_command(TRUE))
{
/* The AUTH command is not permitted to occur inside a transaction, and may
US"AUTH command used when not advertised");
break;
}
- if (sender_host_authenticated != NULL)
+ if (sender_host_authenticated)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
US"already authenticated");
break;
}
- if (sender_address != NULL)
+ if (sender_address)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
US"not permitted in mail transaction");
/* Check the ACL */
- if (acl_smtp_auth != NULL)
+ if ( acl_smtp_auth
+ && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
+ &user_msg, &log_msg)) != OK
+ )
{
- rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth, &user_msg, &log_msg);
- if (rc != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
- break;
- }
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
+ break;
}
/* Find the name of the requested authentication mechanism. */
as a server and which has been advertised (unless, sigh, allow_auth_
unadvertised is set). */
- for (au = auths; au != NULL; au = au->next)
- {
+ for (au = auths; au; au = au->next)
if (strcmpic(s, au->public_name) == 0 && au->server &&
- (au->advertised || allow_auth_unadvertised)) break;
- }
-
- if (au == NULL)
- {
- done = synprot_error(L_smtp_protocol_error, 504, NULL,
- string_sprintf("%s authentication mechanism not supported", s));
- break;
- }
-
- /* Run the checking code, passing the remainder of the command line as
- data. Initials the $auth<n> variables as empty. Initialize $0 empty and set
- it as the only set numerical variable. The authenticator may set $auth<n>
- and also set other numeric variables. The $auth<n> variables are preferred
- nowadays; the numerical variables remain for backwards compatibility.
-
- Afterwards, have a go at expanding the set_id string, even if
- authentication failed - for bad passwords it can be useful to log the
- userid. On success, require set_id to expand and exist, and put it in
- authenticated_id. Save this in permanent store, as the working store gets
- reset at HELO, RSET, etc. */
-
- for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL;
- expand_nmax = 0;
- expand_nlength[0] = 0; /* $0 contains nothing */
-
- c = (au->info->servercode)(au, smtp_cmd_data);
- if (au->set_id != NULL) set_id = expand_string(au->set_id);
- expand_nmax = -1; /* Reset numeric variables */
- for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL; /* Reset $auth<n> */
-
- /* The value of authenticated_id is stored in the spool file and printed in
- log lines. It must not contain binary zeros or newline characters. In
- normal use, it never will, but when playing around or testing, this error
- can (did) happen. To guard against this, ensure that the id contains only
- printing characters. */
-
- if (set_id != NULL) set_id = string_printing(set_id);
+ (au->advertised || allow_auth_unadvertised))
+ break;
- /* For the non-OK cases, set up additional logging data if set_id
- is not empty. */
-
- if (c != OK)
- {
- if (set_id != NULL && *set_id != 0)
- set_id = string_sprintf(" (set_id=%s)", set_id);
- else set_id = US"";
- }
-
- /* Switch on the result */
-
- switch(c)
+ if (au)
{
- case OK:
- if (au->set_id == NULL || set_id != NULL) /* Complete success */
- {
- if (set_id != NULL) authenticated_id = string_copy_malloc(set_id);
- sender_host_authenticated = au->name;
- authentication_failed = FALSE;
- authenticated_fail_id = NULL; /* Impossible to already be set? */
-
- received_protocol =
- (sender_host_address ? protocols : protocols_local)
- [pextend + pauthed + (tls_in.active >= 0 ? pcrpted:0)];
- s = ss = US"235 Authentication succeeded";
- authenticated_by = au;
- break;
- }
-
- /* Authentication succeeded, but we failed to expand the set_id string.
- Treat this as a temporary error. */
-
- auth_defer_msg = expand_string_message;
- /* Fall through */
-
- case DEFER:
- if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
- s = string_sprintf("435 Unable to authenticate at present%s",
- auth_defer_user_msg);
- ss = string_sprintf("435 Unable to authenticate at present%s: %s",
- set_id, auth_defer_msg);
- break;
+ c = smtp_in_auth(au, &s, &ss);
- case BAD64:
- s = ss = US"501 Invalid base64 data";
- break;
-
- case CANCELLED:
- s = ss = US"501 Authentication cancelled";
- break;
-
- case UNEXPECTED:
- s = ss = US"553 Initial data not expected";
- break;
-
- case FAIL:
- if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
- s = US"535 Incorrect authentication data";
- ss = string_sprintf("535 Incorrect authentication data%s", set_id);
- break;
-
- default:
- if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
- s = US"435 Internal error";
- ss = string_sprintf("435 Internal error%s: return %d from authentication "
- "check", set_id, c);
- break;
+ smtp_printf("%s\r\n", s);
+ if (c != OK)
+ log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
+ au->name, host_and_ident(FALSE), ss);
}
-
- smtp_printf("%s\r\n", s);
- if (c != OK)
- log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
- au->name, host_and_ident(FALSE), ss);
+ else
+ done = synprot_error(L_smtp_protocol_error, 504, NULL,
+ string_sprintf("%s authentication mechanism not supported", s));
break; /* AUTH_CMD */
/* Apply an ACL check if one is defined; afterwards, recheck
synchronization in case the client started sending in a delay. */
- if (acl_smtp_helo != NULL)
- {
- rc = acl_check(ACL_WHERE_HELO, NULL, acl_smtp_helo, &user_msg, &log_msg);
- if (rc != OK)
+ if (acl_smtp_helo)
+ if ((rc = acl_check(ACL_WHERE_HELO, NULL, acl_smtp_helo,
+ &user_msg, &log_msg)) != OK)
{
done = smtp_handle_acl_fail(ACL_WHERE_HELO, rc, user_msg, log_msg);
sender_helo_name = NULL;
break;
}
else if (!check_sync()) goto SYNC_FAILURE;
- }
/* Generate an OK reply. The default string includes the ident if present,
and also the IP address if present. Reflecting back the ident is intended
tls_advertised = FALSE;
#endif
dsn_advertised = FALSE;
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
smtputf8_advertised = FALSE;
#endif
if (sender_host_address != NULL)
{
- s = string_cat(s, &size, &ptr, US" [", 2);
- s = string_cat(s, &size, &ptr, sender_host_address,
- Ustrlen(sender_host_address));
- s = string_cat(s, &size, &ptr, US"]", 1);
+ s = string_catn(s, &size, &ptr, US" [", 2);
+ s = string_cat (s, &size, &ptr, sender_host_address);
+ s = string_catn(s, &size, &ptr, US"]", 1);
}
}
{
char *ss;
int codelen = 4;
- smtp_message_code(&smtp_code, &codelen, &user_msg, NULL);
+ smtp_message_code(&smtp_code, &codelen, &user_msg, NULL, TRUE);
s = string_sprintf("%.*s%s", codelen, smtp_code, user_msg);
if ((ss = strpbrk(CS s, "\r\n")) != NULL)
{
size = ptr + 1;
}
- s = string_cat(s, &size, &ptr, US"\r\n", 2);
+ s = string_catn(s, &size, &ptr, US"\r\n", 2);
/* If we received EHLO, we must create a multiline response which includes
the functions supported. */
{
sprintf(CS big_buffer, "%.3s-SIZE %d\r\n", smtp_code,
thismessage_size_limit);
- s = string_cat(s, &size, &ptr, big_buffer, Ustrlen(big_buffer));
+ s = string_cat(s, &size, &ptr, big_buffer);
}
else
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-SIZE\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-SIZE\r\n", 7);
}
/* Exim does not do protocol conversion or data conversion. It is 8-bit
if (accept_8bitmime)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-8BITMIME\r\n", 11);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-8BITMIME\r\n", 11);
}
/* Advertise DSN support if configured to do so. */
- if (verify_check_host(&dsn_advertise_hosts) != FAIL)
+ if (verify_check_host(&dsn_advertise_hosts) != FAIL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-DSN\r\n", 6);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-DSN\r\n", 6);
dsn_advertised = TRUE;
}
if (acl_smtp_etrn != NULL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-ETRN\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-ETRN\r\n", 7);
}
/* Advertise EXPN if there's an ACL checking whether a host is
if (acl_smtp_expn != NULL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-EXPN\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-EXPN\r\n", 7);
}
/* Exim is quite happy with pipelining, so let the other end know that
if (pipelining_enable &&
verify_check_host(&pipelining_advertise_hosts) == OK)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-PIPELINING\r\n", 13);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-PIPELINING\r\n", 13);
sync_cmd_limit = NON_SYNC_CMD_PIPELINING;
pipelining_advertised = TRUE;
}
letters, so output the names in upper case, though we actually recognize
them in either case in the AUTH command. */
- if (auths != NULL)
+ if ( auths
+#if defined(SUPPORT_TLS) && defined(AUTH_TLS)
+ && !sender_host_authenticated
+#endif
+ && verify_check_host(&auth_advertise_hosts) == OK
+ )
+ {
+ auth_instance *au;
+ BOOL first = TRUE;
+ for (au = auths; au; au = au->next)
+ if (au->server && (au->advertise_condition == NULL ||
+ expand_check_condition(au->advertise_condition, au->name,
+ US"authenticator")))
+ {
+ int saveptr;
+ if (first)
+ {
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-AUTH", 5);
+ first = FALSE;
+ auth_advertised = TRUE;
+ }
+ saveptr = ptr;
+ s = string_catn(s, &size, &ptr, US" ", 1);
+ s = string_cat (s, &size, &ptr, au->public_name);
+ while (++saveptr < ptr) s[saveptr] = toupper(s[saveptr]);
+ au->advertised = TRUE;
+ }
+ else
+ au->advertised = FALSE;
+
+ if (!first) s = string_catn(s, &size, &ptr, US"\r\n", 2);
+ }
+
+ /* RFC 3030 CHUNKING */
+
+ if (verify_check_host(&chunking_advertise_hosts) != FAIL)
{
- if (verify_check_host(&auth_advertise_hosts) == OK)
- {
- auth_instance *au;
- BOOL first = TRUE;
- for (au = auths; au != NULL; au = au->next)
- {
- if (au->server && (au->advertise_condition == NULL ||
- expand_check_condition(au->advertise_condition, au->name,
- US"authenticator")))
- {
- int saveptr;
- if (first)
- {
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-AUTH", 5);
- first = FALSE;
- auth_advertised = TRUE;
- }
- saveptr = ptr;
- s = string_cat(s, &size, &ptr, US" ", 1);
- s = string_cat(s, &size, &ptr, au->public_name,
- Ustrlen(au->public_name));
- while (++saveptr < ptr) s[saveptr] = toupper(s[saveptr]);
- au->advertised = TRUE;
- }
- else au->advertised = FALSE;
- }
- if (!first) s = string_cat(s, &size, &ptr, US"\r\n", 2);
- }
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-CHUNKING\r\n", 11);
+ chunking_offered = TRUE;
+ chunking_state = CHUNKING_OFFERED;
}
/* Advertise TLS (Transport Level Security) aka SSL (Secure Socket Layer)
if (tls_in.active < 0 &&
verify_check_host(&tls_advertise_hosts) != FAIL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-STARTTLS\r\n", 11);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-STARTTLS\r\n", 11);
tls_advertised = TRUE;
}
#endif
/* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
if (prdr_enable)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-PRDR\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-PRDR\r\n", 7);
}
#endif
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
if ( accept_8bitmime
&& verify_check_host(&smtputf8_advertise_hosts) != FAIL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-SMTPUTF8\r\n", 11);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-SMTPUTF8\r\n", 11);
smtputf8_advertised = TRUE;
}
#endif
/* Finish off the multiline reply with one that is always available. */
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US" HELP\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US" HELP\r\n", 7);
}
/* Terminate the string (for debug), write it, and note that HELO/EHLO
if (!extract_option(&name, &value)) break;
for (mail_args = env_mail_type_list;
- (char *)mail_args < (char *)env_mail_type_list + sizeof(env_mail_type_list);
+ mail_args->value != ENV_MAIL_OPT_NULL;
mail_args++
)
if (strcmpic(name, mail_args->name) == 0)
rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth,
&user_msg, &log_msg);
}
-
+
switch (rc)
{
case OK:
expand_check_condition(authenticated_by->mail_auth_condition,
authenticated_by->name, US"authenticator"))
break; /* Accept the AUTH */
-
+
ignore_msg = US"server_mail_auth_condition failed";
if (authenticated_id != NULL)
ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
ignore_msg, authenticated_id);
-
+
/* Fall through */
-
+
case FAIL:
authenticated_sender = NULL;
log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
value, host_and_ident(TRUE), ignore_msg);
break;
-
+
/* Should only get DEFER or ERROR here. Put back terminator
overrides for error message */
-
+
default:
value[-1] = '=';
name[-1] = ' ';
break;
#endif
-#ifdef EXPERIMENTAL_INTERNATIONAL
+#ifdef SUPPORT_I18N
case ENV_MAIL_OPT_UTF8:
if (smtputf8_advertised)
{
}
break;
#endif
- /* Unknown option. Stick back the terminator characters and break
+ /* No valid option. Stick back the terminator characters and break
the loop. Do the name-terminator second as extract_option sets
- value==name when it found no equal-sign.
- An error for a malformed address will occur. */
- default:
+ value==name when it found no equal-sign.
+ An error for a malformed address will occur. */
+ case ENV_MAIL_OPT_NULL:
value[-1] = '=';
name[-1] = ' ';
arg_error = TRUE;
break;
+
+ default: assert(0);
}
/* Break out of for loop if switch() had bad argument or
when start of the email address is reached */
global_rewrite_rules)
: smtp_cmd_data;
- /* rfc821_domains = TRUE; << no longer needed */
raw_sender =
parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain,
TRUE);
- /* rfc821_domains = FALSE; << no longer needed */
- if (raw_sender == NULL)
+ if (!raw_sender)
{
done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
break;
US"",
#endif
US"\r\n");
- else
+ else
{
#ifndef DISABLE_PRDR
if (prdr_requested)
/* Apply SMTP rewriting then extract the working address. Don't allow "<>"
as a recipient address */
- recipient = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules) : smtp_cmd_data;
-
- /* rfc821_domains = TRUE; << no longer needed */
- recipient = parse_extract_address(recipient, &errmess, &start, &end,
- &recipient_domain, FALSE);
- /* rfc821_domains = FALSE; << no longer needed */
+ recipient = rewrite_existflags & rewrite_smtp
+ ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
- if (recipient == NULL)
+ if (!(recipient = parse_extract_address(recipient, &errmess, &start, &end,
+ &recipient_domain, FALSE)))
{
done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
rcpt_fail_count++;
we must always qualify this address, regardless. */
if (recipient_domain == 0)
- {
- if (allow_unqualified_recipient ||
- strcmpic(recipient, US"postmaster") == 0)
- {
- DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
- recipient);
- recipient_domain = Ustrlen(recipient) + 1;
- recipient = rewrite_address_qualify(recipient, TRUE);
- }
- else
+ if (!(recipient_domain = qualify_recipient(&recipient, smtp_cmd_data,
+ US"recipient")))
{
rcpt_fail_count++;
- smtp_printf("501 %s: recipient address must contain a domain\r\n",
- smtp_cmd_data);
- log_write(L_smtp_syntax_error,
- LOG_MAIN|LOG_REJECT, "unqualified recipient rejected: "
- "<%s> %s%s", recipient, host_and_ident(TRUE),
- host_lookup_msg);
break;
}
- }
/* Check maximum allowed */
if (user_msg == NULL) smtp_printf("250 Accepted\r\n");
else smtp_user_msg(US"250", user_msg);
receive_add_recipient(recipient, -1);
-
+
/* Set the dsn flags in the recipients_list */
recipients_list[recipients_count-1].orcpt = orcpt;
recipients_list[recipients_count-1].dsn_flags = flags;
(often indicating some kind of system error), it is helpful to include it
with the DATA rejection (an idea suggested by Tony Finch). */
+ case BDAT_CMD:
+ HAD(SCH_BDAT);
+ {
+ int n;
+
+ if (chunking_state != CHUNKING_OFFERED)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"BDAT command used when CHUNKING not advertised");
+ break;
+ }
+
+ /* grab size, endmarker */
+
+ if (sscanf(CS smtp_cmd_data, "%u %n", &chunking_datasize, &n) < 1)
+ {
+ done = synprot_error(L_smtp_protocol_error, 501, NULL,
+ US"missing size for BDAT command");
+ break;
+ }
+ chunking_state = strcmpic(smtp_cmd_data+n, US"LAST") == 0
+ ? CHUNKING_LAST : CHUNKING_ACTIVE;
+ chunking_data_left = chunking_datasize;
+
+ lwr_receive_getc = receive_getc;
+ lwr_receive_ungetc = receive_ungetc;
+ receive_getc = bdat_getc;
+ receive_ungetc = bdat_ungetc;
+
+ DEBUG(D_any)
+ debug_printf("chunking state %d\n", (int)chunking_state);
+ goto DATA_BDAT;
+ }
+
case DATA_CMD:
HAD(SCH_DATA);
+
+ DATA_BDAT: /* Common code for DATA and BDAT */
if (!discarded && recipients_count <= 0)
{
if (rcpt_smtp_response_same && rcpt_smtp_response != NULL)
smtp_respond(code, 3, FALSE, rcpt_smtp_response);
}
if (pipelining_advertised && last_was_rcpt)
- smtp_printf("503 Valid RCPT command must precede DATA\r\n");
+ smtp_printf("503 Valid RCPT command must precede %s\r\n",
+ smtp_names[smtp_connection_had[smtp_ch_index-1]]);
else
done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"valid RCPT command must precede DATA");
+ smtp_connection_had[smtp_ch_index-1] == SCH_DATA
+ ? US"valid RCPT command must precede DATA"
+ : US"valid RCPT command must precede BDAT");
+
+ if (chunking_state > CHUNKING_OFFERED)
+ bdat_flush_data();
break;
}
break;
}
- /* If there is an ACL, re-check the synchronization afterwards, since the
- ACL may have delayed. To handle cutthrough delivery enforce a dummy call
- to get the DATA command sent. */
-
- if (acl_smtp_predata == NULL && cutthrough.fd < 0) rc = OK; else
- {
- uschar * acl= acl_smtp_predata ? acl_smtp_predata : US"accept";
- enable_dollar_recipients = TRUE;
- rc = acl_check(ACL_WHERE_PREDATA, NULL, acl, &user_msg,
- &log_msg);
- enable_dollar_recipients = FALSE;
- if (rc == OK && !check_sync()) goto SYNC_FAILURE;
+ if (chunking_state > CHUNKING_OFFERED)
+ { /* No predata ACL or go-ahead output for BDAT */
+ rc = OK;
}
-
- if (rc == OK)
+ else
{
- uschar * code;
- code = US"354";
- if (user_msg == NULL)
- smtp_printf("%s Enter message, ending with \".\" on a line by itself\r\n", code);
- else smtp_user_msg(code, user_msg);
- done = 3;
- message_ended = END_NOTENDED; /* Indicate in middle of data */
+ /* If there is an ACL, re-check the synchronization afterwards, since the
+ ACL may have delayed. To handle cutthrough delivery enforce a dummy call
+ to get the DATA command sent. */
+
+ if (acl_smtp_predata == NULL && cutthrough.fd < 0)
+ rc = OK;
+ else
+ {
+ uschar * acl = acl_smtp_predata ? acl_smtp_predata : US"accept";
+ enable_dollar_recipients = TRUE;
+ rc = acl_check(ACL_WHERE_PREDATA, NULL, acl, &user_msg,
+ &log_msg);
+ enable_dollar_recipients = FALSE;
+ if (rc == OK && !check_sync())
+ goto SYNC_FAILURE;
+
+ if (rc != OK)
+ { /* Either the ACL failed the address, or it was deferred. */
+ done = smtp_handle_acl_fail(ACL_WHERE_PREDATA, rc, user_msg, log_msg);
+ break;
+ }
+ }
+
+ if (user_msg)
+ smtp_user_msg(US"354", user_msg);
+ else
+ smtp_printf(
+ "354 Enter message, ending with \".\" on a line by itself\r\n");
}
- /* Either the ACL failed the address, or it was deferred. */
+ done = 3;
+ message_ended = END_NOTENDED; /* Indicate in middle of data */
- else
- done = smtp_handle_acl_fail(ACL_WHERE_PREDATA, rc, user_msg, log_msg);
break;
case VRFY_CMD:
- HAD(SCH_VRFY);
- rc = acl_check(ACL_WHERE_VRFY, NULL, acl_smtp_vrfy, &user_msg, &log_msg);
- if (rc != OK)
- done = smtp_handle_acl_fail(ACL_WHERE_VRFY, rc, user_msg, log_msg);
- else
{
- uschar *address;
- uschar *s = NULL;
+ uschar * address;
- /* rfc821_domains = TRUE; << no longer needed */
- address = parse_extract_address(smtp_cmd_data, &errmess, &start, &end,
- &recipient_domain, FALSE);
- /* rfc821_domains = FALSE; << no longer needed */
+ HAD(SCH_VRFY);
+
+ if (!(address = parse_extract_address(smtp_cmd_data, &errmess,
+ &start, &end, &recipient_domain, FALSE)))
+ {
+ smtp_printf("501 %s\r\n", errmess);
+ break;
+ }
- if (address == NULL)
- s = string_sprintf("501 %s", errmess);
+ if (recipient_domain == 0)
+ if (!(recipient_domain = qualify_recipient(&address, smtp_cmd_data,
+ US"verify")))
+ break;
+
+ if ((rc = acl_check(ACL_WHERE_VRFY, address, acl_smtp_vrfy,
+ &user_msg, &log_msg)) != OK)
+ done = smtp_handle_acl_fail(ACL_WHERE_VRFY, rc, user_msg, log_msg);
else
- {
- address_item *addr = deliver_make_addr(address, FALSE);
- switch(verify_address(addr, NULL, vopt_is_recipient | vopt_qualify, -1,
- -1, -1, NULL, NULL, NULL))
- {
- case OK:
- s = string_sprintf("250 <%s> is deliverable", address);
- break;
+ {
+ uschar * s = NULL;
+ address_item * addr = deliver_make_addr(address, FALSE);
- case DEFER:
- s = (addr->user_message != NULL)?
- string_sprintf("451 <%s> %s", address, addr->user_message) :
- string_sprintf("451 Cannot resolve <%s> at this time", address);
- break;
+ switch(verify_address(addr, NULL, vopt_is_recipient | vopt_qualify, -1,
+ -1, -1, NULL, NULL, NULL))
+ {
+ case OK:
+ s = string_sprintf("250 <%s> is deliverable", address);
+ break;
- case FAIL:
- s = (addr->user_message != NULL)?
- string_sprintf("550 <%s> %s", address, addr->user_message) :
- string_sprintf("550 <%s> is not deliverable", address);
- log_write(0, LOG_MAIN, "VRFY failed for %s %s",
- smtp_cmd_argument, host_and_ident(TRUE));
- break;
- }
- }
+ case DEFER:
+ s = (addr->user_message != NULL)?
+ string_sprintf("451 <%s> %s", address, addr->user_message) :
+ string_sprintf("451 Cannot resolve <%s> at this time", address);
+ break;
- smtp_printf("%s\r\n", s);
+ case FAIL:
+ s = (addr->user_message != NULL)?
+ string_sprintf("550 <%s> %s", address, addr->user_message) :
+ string_sprintf("550 <%s> is not deliverable", address);
+ log_write(0, LOG_MAIN, "VRFY failed for %s %s",
+ smtp_cmd_argument, host_and_ident(TRUE));
+ break;
+ }
+
+ smtp_printf("%s\r\n", s);
+ }
+ break;
}
- break;
case EXPN_CMD:
/* Apply an ACL check if one is defined */
- if (acl_smtp_starttls != NULL)
+ if ( acl_smtp_starttls
+ && (rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls,
+ &user_msg, &log_msg)) != OK
+ )
{
- rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls, &user_msg,
- &log_msg);
- if (rc != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg);
- break;
- }
+ done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg);
+ break;
}
/* RFC 2487 is not clear on when this command may be sent, though it
if (receive_smtp_buffered())
{
DEBUG(D_any)
- debug_printf("Non-empty input buffer after STARTTLS; naive attack?");
+ debug_printf("Non-empty input buffer after STARTTLS; naive attack?\n");
if (tls_in.active < 0)
smtp_inend = smtp_inptr = smtp_inbuffer;
/* and if TLS is already active, tls_server_start() should fail */
helo_seen = esmtp = auth_advertised = pipelining_advertised = FALSE;
cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_AUTH].is_mail_cmd = TRUE;
+ cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
if (sender_helo_name != NULL)
{
store_free(sender_helo_name);
set, but we must still reject all incoming commands. */
DEBUG(D_tls) debug_printf("TLS failed to start\n");
- while (done <= 0)
+ while (done <= 0) switch(smtp_read_command(FALSE))
{
- switch(smtp_read_command(FALSE))
- {
- case EOF_CMD:
- log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF",
- smtp_get_connection_info());
- smtp_notquit_exit(US"tls-failed", NULL, NULL);
- done = 2;
- break;
-
- /* It is perhaps arguable as to which exit ACL should be called here,
- but as it is probably a situation that almost never arises, it
- probably doesn't matter. We choose to call the real QUIT ACL, which in
- some sense is perhaps "right". */
-
- case QUIT_CMD:
- user_msg = NULL;
- if (acl_smtp_quit != NULL)
- {
- rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg,
- &log_msg);
- if (rc == ERROR)
- log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
- log_msg);
- }
- if (user_msg == NULL)
- smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
- else
- smtp_respond(US"221", 3, TRUE, user_msg);
- log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
- smtp_get_connection_info());
- done = 2;
- break;
+ case EOF_CMD:
+ log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF",
+ smtp_get_connection_info());
+ smtp_notquit_exit(US"tls-failed", NULL, NULL);
+ done = 2;
+ break;
+
+ /* It is perhaps arguable as to which exit ACL should be called here,
+ but as it is probably a situation that almost never arises, it
+ probably doesn't matter. We choose to call the real QUIT ACL, which in
+ some sense is perhaps "right". */
+
+ case QUIT_CMD:
+ user_msg = NULL;
+ if ( acl_smtp_quit
+ && ((rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg,
+ &log_msg)) == ERROR))
+ log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
+ log_msg);
+ if (user_msg)
+ smtp_respond(US"221", 3, TRUE, user_msg);
+ else
+ smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
+ log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
+ smtp_get_connection_info());
+ done = 2;
+ break;
- default:
- smtp_printf("554 Security failure\r\n");
- break;
- }
+ default:
+ smtp_printf("554 Security failure\r\n");
+ break;
}
tls_close(TRUE, TRUE);
break;
message. */
case QUIT_CMD:
- HAD(SCH_QUIT);
- incomplete_transaction_log(US"QUIT");
- if (acl_smtp_quit != NULL)
- {
- rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg, &log_msg);
- if (rc == ERROR)
- log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
- log_msg);
- }
- if (user_msg == NULL)
- smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
- else
- smtp_respond(US"221", 3, TRUE, user_msg);
-
- #ifdef SUPPORT_TLS
- tls_close(TRUE, TRUE);
- #endif
-
+ smtp_quit_handler(&user_msg, &log_msg);
done = 2;
- log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
- smtp_get_connection_info());
break;
case RSET_CMD:
- HAD(SCH_RSET);
- incomplete_transaction_log(US"RSET");
+ smtp_rset_handler();
smtp_reset(reset_point);
toomany = FALSE;
- smtp_printf("250 Reset OK\r\n");
- cmd_list[CMD_LIST_RSET].is_mail_cmd = FALSE;
break;
verify_check_host(&tls_advertise_hosts) != FAIL)
Ustrcat(buffer, " STARTTLS");
#endif
- Ustrcat(buffer, " HELO EHLO MAIL RCPT DATA");
+ Ustrcat(buffer, " HELO EHLO MAIL RCPT DATA BDAT");
Ustrcat(buffer, " NOOP QUIT RSET HELP");
if (acl_smtp_etrn != NULL) Ustrcat(buffer, " ETRN");
if (acl_smtp_expn != NULL) Ustrcat(buffer, " EXPN");
log_write(L_etrn, LOG_MAIN, "ETRN %s received from %s", smtp_cmd_argument,
host_and_ident(FALSE));
- rc = acl_check(ACL_WHERE_ETRN, NULL, acl_smtp_etrn, &user_msg, &log_msg);
- if (rc != OK)
+ if ((rc = acl_check(ACL_WHERE_ETRN, NULL, acl_smtp_etrn,
+ &user_msg, &log_msg)) != OK)
{
done = smtp_handle_acl_fail(ACL_WHERE_ETRN, rc, user_msg, log_msg);
break;
break;
}
etrn_command = US"exim -R";
- argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE, 2, US"-R",
- smtp_cmd_data);
+ argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE,
+ *queue_name ? 4 : 2,
+ US"-R", smtp_cmd_data,
+ US"-MCG", queue_name);
}
/* If we are host-testing, don't actually do anything. */
/* If ETRN queue runs are to be serialized, check the database to
ensure one isn't already running. */
- if (smtp_etrn_serialize && !enq_start(etrn_serialize_key))
+ if (smtp_etrn_serialize && !enq_start(etrn_serialize_key, 1))
{
smtp_printf("458 Already processing %s\r\n", smtp_cmd_data);
break;
done = 1; /* Pretend eof - drops connection */
break;
- #ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
case PROXY_FAIL_IGNORE_CMD:
smtp_printf("503 Command refused, required Proxy negotiation failed\r\n");
break;
- #endif
+#endif
default:
if (unknown_command_count++ >= smtp_max_unknown_commands)
projects / exim.git / blobdiff