*************************************************/
/* Copyright (c) University of Cambridge 1995 - 2018 */
+/* Copyright (c) The Exim Maintainers 2020 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions for handling an incoming SMTP call. */
BOOL helo_verify :1;
BOOL helo_seen :1;
BOOL helo_accept_junk :1;
-#ifdef SUPPORT_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
BOOL pipe_connect_acceptable :1;
#endif
BOOL rcpt_smtp_response_same :1;
}
-#ifdef SUPPORT_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
static BOOL
pipeline_connect_sends(void)
{
smtp_notquit_exit(US"command-timeout", US"421",
US"%s: SMTP command timeout - closing connection",
smtp_active_hostname);
-exim_exit(EXIT_FAILURE, US"receiving");
+exim_exit(EXIT_FAILURE);
}
void
moan_smtp_batch(NULL, "421 SIGTERM received"); /* Does not return */
smtp_notquit_exit(US"signal-exit", US"421",
US"%s: Service not available - closing connection", smtp_active_hostname);
-exim_exit(EXIT_FAILURE, US"receiving");
+exim_exit(EXIT_FAILURE);
}
void
checking that: for convenience, TLS output errors are remembered here so that
they are also picked up later by smtp_fflush().
+This function is exposed to the local_scan API; do not change the signature.
+
Arguments:
format format string
more further data expected
/* This is split off so that verify.c:respond_printf() can, in effect, call
smtp_printf(), bearing in mind that in C a vararg function can't directly
-call another vararg function, only a function which accepts a va_list. */
+call another vararg function, only a function which accepts a va_list.
+
+This function is exposed to the local_scan API; do not change the signature.
+*/
/*XXX consider passing caller-info in, for string_vformat-onward */
void
{
log_write(0, LOG_MAIN|LOG_PANIC, "string too large in smtp_printf()");
smtp_closedown(US"Unexpected error");
- exim_exit(EXIT_FAILURE, NULL);
+ exim_exit(EXIT_FAILURE);
}
/* If this is the first output for a (non-batch) RCPT command, see if all RCPTs
/* Now write the string */
+if (
#ifndef DISABLE_TLS
-if (tls_in.active.sock >= 0)
- {
- if (tls_write(NULL, gs.s, gs.ptr, more) < 0)
- smtp_write_error = -1;
- }
-else
+ tls_in.active.sock >= 0 ? (tls_write(NULL, gs.s, gs.ptr, more) < 0) :
#endif
-
-if (fprintf(smtp_out, "%s", gs.s) < 0) smtp_write_error = -1;
+ (fwrite(gs.s, gs.ptr, 1, smtp_out) == 0)
+ )
+ smtp_write_error = -1;
}
/* This function isn't currently used within Exim (it detects errors when it
tries to read the next SMTP input), but is available for use in local_scan().
-For non-TLS connections, it flushes the output and checks for errors. For
-TLS-connections, it checks for a previously-detected TLS write error.
+It flushes the output and checks for errors.
Arguments: none
Returns: 0 for no error; -1 after an error
smtp_fflush(void)
{
if (tls_in.active.sock < 0 && fflush(smtp_out) != 0) smtp_write_error = -1;
+
+if (
+#ifndef DISABLE_TLS
+ tls_in.active.sock >= 0 ? (tls_write(NULL, NULL, 0, FALSE) < 0) :
+#endif
+ (fflush(smtp_out) != 0)
+ )
+ smtp_write_error = -1;
+
return smtp_write_error;
}
#endif
#ifdef EXPERIMENTAL_ARC
arc_state = arc_state_reason = NULL;
+arc_received_instance = 0;
#endif
dsn_ret = 0;
dsn_envid = NULL;
static void
tfo_in_check(void)
{
-# ifdef TCP_INFO
+# ifdef __FreeBSD__
+int is_fastopen;
+socklen_t len = sizeof(is_fastopen);
+
+/* The tinfo TCPOPT_FAST_OPEN bit seems unreliable, and we don't see state
+TCP_SYN_RCV (as of 12.1) so no idea about data-use. */
+
+if (getsockopt(fileno(smtp_out), IPPROTO_TCP, TCP_FASTOPEN, &is_fastopen, &len) == 0)
+ {
+ if (is_fastopen)
+ {
+ DEBUG(D_receive)
+ debug_printf("TFO mode connection (TCP_FASTOPEN getsockopt)\n");
+ f.tcp_in_fastopen = TRUE;
+ }
+ }
+else DEBUG(D_receive)
+ debug_printf("TCP_INFO getsockopt: %s\n", strerror(errno));
+
+# elif defined(TCP_INFO)
struct tcp_info tinfo;
socklen_t len = sizeof(tinfo);
if (getsockopt(fileno(smtp_out), IPPROTO_TCP, TCP_INFO, &tinfo, &len) == 0)
-#ifdef TCPI_OPT_SYN_DATA /* FreeBSD 11 does not seem to have this yet */
+# ifdef TCPI_OPT_SYN_DATA /* FreeBSD 11,12 do not seem to have this yet */
if (tinfo.tcpi_options & TCPI_OPT_SYN_DATA)
{
- DEBUG(D_receive) debug_printf("TCP_FASTOPEN mode connection (ACKd data-on-SYN)\n");
+ DEBUG(D_receive)
+ debug_printf("TFO mode connection (ACKd data-on-SYN)\n");
f.tcp_in_fastopen_data = f.tcp_in_fastopen = TRUE;
}
else
-#endif
- if (tinfo.tcpi_state == TCP_SYN_RECV)
+# endif
+ if (tinfo.tcpi_state == TCP_SYN_RECV) /* Not seen on FreeBSD 12.1 */
{
- DEBUG(D_receive) debug_printf("TCP_FASTOPEN mode connection (state TCP_SYN_RECV)\n");
+ DEBUG(D_receive)
+ debug_printf("TFO mode connection (state TCP_SYN_RECV)\n");
f.tcp_in_fastopen = TRUE;
}
+else DEBUG(D_receive)
+ debug_printf("TCP_INFO getsockopt: %s\n", strerror(errno));
# endif
}
#endif
authenticated_by = NULL;
#ifndef DISABLE_TLS
-tls_in.cipher = tls_in.peerdn = NULL;
+tls_in.ver = tls_in.cipher = tls_in.peerdn = NULL;
tls_in.ourcert = tls_in.peercert = NULL;
tls_in.sni = NULL;
tls_in.ocsp = OCSP_NOT_REQ;
/* Before we write the banner, check that there is no input pending, unless
this synchronisation check is disabled. */
-#ifdef SUPPORT_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
fl.pipe_connect_acceptable =
sender_host_address && verify_check_host(&pipe_connect_advertise_hosts) == OK;
#endif
{
unsigned n = smtp_inend - smtp_inptr;
- if (n > 32) n = 32;
+ if (n > 128) n = 128;
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol "
"synchronization error (input sent without waiting for greeting): "
/*XXX the ehlo-resp code does its own tls/nontls bit. Maybe subroutine that? */
smtp_printf("%s",
-#ifdef SUPPORT_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
fl.pipe_connect_acceptable && pipeline_connect_sends(),
#else
FALSE,
handshake arrived. If so we must have managed a TFO. */
#ifdef TCP_FASTOPEN
-tfo_in_check();
+if (sender_host_address && !f.sender_host_notsocket) tfo_in_check();
#endif
return TRUE;
{
smtp_printf("%.3s-%.*s%.*s\r\n", TRUE, code, esclen, esc, (int)(nl - msg), msg);
msg = nl + 1;
- while (isspace(*msg)) msg++;
+ Uskip_whitespace(&msg);
}
}
}
switch(rc)
{
case OK:
- if (!au->set_id || set_id) /* Complete success */
- {
- if (set_id) authenticated_id = string_copy_perm(set_id, TRUE);
- sender_host_authenticated = au->name;
- sender_host_auth_pubname = au->public_name;
- authentication_failed = FALSE;
- authenticated_fail_id = NULL; /* Impossible to already be set? */
-
- received_protocol =
- (sender_host_address ? protocols : protocols_local)
- [pextend + pauthed + (tls_in.active.sock >= 0 ? pcrpted:0)];
- *s = *ss = US"235 Authentication succeeded";
- authenticated_by = au;
- break;
- }
+ if (!au->set_id || set_id) /* Complete success */
+ {
+ if (set_id) authenticated_id = string_copy_perm(set_id, TRUE);
+ sender_host_authenticated = au->name;
+ sender_host_auth_pubname = au->public_name;
+ authentication_failed = FALSE;
+ authenticated_fail_id = NULL; /* Impossible to already be set? */
- /* Authentication succeeded, but we failed to expand the set_id string.
- Treat this as a temporary error. */
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [pextend + pauthed + (tls_in.active.sock >= 0 ? pcrpted:0)];
+ *s = *ss = US"235 Authentication succeeded";
+ authenticated_by = au;
+ break;
+ }
- auth_defer_msg = expand_string_message;
- /* Fall through */
+ /* Authentication succeeded, but we failed to expand the set_id string.
+ Treat this as a temporary error. */
+
+ auth_defer_msg = expand_string_message;
+ /* Fall through */
case DEFER:
- if (set_id) authenticated_fail_id = string_copy_perm(set_id, TRUE);
- *s = string_sprintf("435 Unable to authenticate at present%s",
- auth_defer_user_msg);
- *ss = string_sprintf("435 Unable to authenticate at present%s: %s",
- set_id, auth_defer_msg);
- break;
+ if (set_id) authenticated_fail_id = string_copy_perm(set_id, TRUE);
+ *s = string_sprintf("435 Unable to authenticate at present%s",
+ auth_defer_user_msg);
+ *ss = string_sprintf("435 Unable to authenticate at present%s: %s",
+ set_id, auth_defer_msg);
+ break;
case BAD64:
- *s = *ss = US"501 Invalid base64 data";
- break;
+ *s = *ss = US"501 Invalid base64 data";
+ break;
case CANCELLED:
- *s = *ss = US"501 Authentication cancelled";
- break;
+ *s = *ss = US"501 Authentication cancelled";
+ break;
case UNEXPECTED:
- *s = *ss = US"553 Initial data not expected";
- break;
+ *s = *ss = US"553 Initial data not expected";
+ break;
case FAIL:
- if (set_id) authenticated_fail_id = string_copy_perm(set_id, TRUE);
- *s = US"535 Incorrect authentication data";
- *ss = string_sprintf("535 Incorrect authentication data%s", set_id);
- break;
+ if (set_id) authenticated_fail_id = string_copy_perm(set_id, TRUE);
+ *s = US"535 Incorrect authentication data";
+ *ss = string_sprintf("535 Incorrect authentication data%s", set_id);
+ break;
default:
- if (set_id) authenticated_fail_id = string_copy_perm(set_id, TRUE);
- *s = US"435 Internal error";
- *ss = string_sprintf("435 Internal error%s: return %d from authentication "
- "check", set_id, rc);
- break;
+ if (set_id) authenticated_fail_id = string_copy_perm(set_id, TRUE);
+ *s = US"435 Internal error";
+ *ss = string_sprintf("435 Internal error%s: return %d from authentication "
+ "check", set_id, rc);
+ break;
}
return rc;
#endif
switch(smtp_read_command(
-#ifdef SUPPORT_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
!fl.pipe_connect_acceptable,
#else
TRUE,
host_build_sender_fullhost(); /* Rebuild */
break;
}
-#ifdef SUPPORT_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
else if (!fl.pipe_connect_acceptable && !check_sync())
#else
else if (!check_sync())
sync_cmd_limit = NON_SYNC_CMD_PIPELINING;
f.smtp_in_pipelining_advertised = TRUE;
-#ifdef SUPPORT_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
if (fl.pipe_connect_acceptable)
{
f.smtp_in_early_pipe_advertised = TRUE;
if (au->server)
{
DEBUG(D_auth+D_expand) debug_printf_indent(
- "Evaluating advertise_condition for %s athenticator\n",
- au->public_name);
+ "Evaluating advertise_condition for %s %s athenticator\n",
+ au->name, au->public_name);
if ( !au->advertise_condition
|| expand_check_condition(au->advertise_condition, au->name,
US"authenticator")
#ifndef DISABLE_TLS
if (tls_in.active.sock >= 0)
(void)tls_write(NULL, g->s, g->ptr,
-# ifdef SUPPORT_PIPE_CONNECT
+# ifndef DISABLE_PIPE_CONNECT
fl.pipe_connect_acceptable && pipeline_connect_sends());
# else
FALSE);
and EXPN etc. to be used when space is short. */
if (!receive_check_fs(
- (smtp_check_spool_space && message_size >= 0)?
- message_size + 5000 : 0))
+ smtp_check_spool_space && message_size >= 0
+ ? message_size + 5000 : 0))
{
smtp_printf("452 Space shortage, please try later\r\n", FALSE);
sender_address = NULL;
f.dot_ends = TRUE;
DATA_BDAT: /* Common code for DATA and BDAT */
-#ifdef SUPPORT_PIPE_CONNECT
+#ifndef DISABLE_PIPE_CONNECT
fl.pipe_connect_acceptable = FALSE;
#endif
if (!discarded && recipients_count <= 0)
oldsignal = signal(SIGCHLD, SIG_IGN);
- if ((pid = fork()) == 0)
+ if ((pid = exim_fork(US"etrn-command")) == 0)
{
smtp_input = FALSE; /* This process is not associated with the */
(void)fclose(smtp_in); /* SMTP call any more. */
/* If not serializing, do the exec right away. Otherwise, fork down
into another process. */
- if (!smtp_etrn_serialize || (pid = fork()) == 0)
+ if ( !smtp_etrn_serialize
+ || (pid = exim_fork(US"etrn-serialised-command")) == 0)
{
DEBUG(D_exec) debug_print_argv(argv);
exim_nullstd(); /* Ensure std{in,out,err} exist */
projects / exim.git / blobdiff