* Local static variables *
*************************************************/
-static FILE *data_file = NULL;
static int data_fd = -1;
static uschar *spool_name = US"";
/* Now close the file if it is open, either as a fd or a stream. */
-if (data_file)
+if (spool_data_file)
{
- (void)fclose(data_file);
- data_file = NULL;
+ (void)fclose(spool_data_file);
+ spool_data_file = NULL;
}
else if (data_fd >= 0)
{
{
recipients_count = 0;
*blackholed_by_ptr = US"MIME ACL";
+ cancel_cutthrough_connection(TRUE, US"mime acl discard");
}
else if (rc != OK)
{
Uunlink(spool_name);
+ cancel_cutthrough_connection(TRUE, US"mime acl not ok");
unspool_mbox();
#ifdef EXPERIMENTAL_DCC
dcc_ok = 0;
yet, initialize the size and warning count, and deal with no size limit. */
message_id[0] = 0;
-data_file = NULL;
+spool_data_file = NULL;
data_fd = -1;
spool_name = US"";
message_size = 0;
are problems when Exim is run under Cygwin (I'm told). See comments in
spool_in.c, where the same locking is done. */
-data_file = fdopen(data_fd, "w+");
+spool_data_file = fdopen(data_fd, "w+");
lock_data.l_type = F_WRLCK;
lock_data.l_whence = SEEK_SET;
lock_data.l_start = 0;
format); write it (remembering that it might contain binary zeros). The result
of fwrite() isn't inspected; instead we call ferror() below. */
-fprintf(data_file, "%s-D\n", message_id);
+fprintf(spool_data_file, "%s-D\n", message_id);
if (next)
{
uschar *s = next->text;
int len = next->slen;
- if (fwrite(s, 1, len, data_file) == len) /* "if" for compiler quietening */
+ if (fwrite(s, 1, len, spool_data_file) == len) /* "if" for compiler quietening */
body_linecount++; /* Assumes only 1 line */
}
(indicated by '.'), or might have encountered an error while writing the
message id or "next" line. */
-if (!ferror(data_file) && !(receive_feof)() && message_ended != END_DOT)
+if (!ferror(spool_data_file) && !(receive_feof)() && message_ended != END_DOT)
{
if (smtp_input)
{
message_ended = chunking_state <= CHUNKING_OFFERED
- ? read_message_data_smtp(data_file)
+ ? read_message_data_smtp(spool_data_file)
: spool_wireformat
- ? read_message_bdat_smtp_wire(data_file)
- : read_message_bdat_smtp(data_file);
+ ? read_message_bdat_smtp_wire(spool_data_file)
+ : read_message_bdat_smtp(spool_data_file);
receive_linecount++; /* The terminating "." line */
}
else
- message_ended = read_message_data(data_file);
+ message_ended = read_message_data(spool_data_file);
receive_linecount += body_linecount; /* For BSMTP errors mainly */
message_linecount += body_linecount;
}
else
{
- fseek(data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
+ fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
give_local_error(ERRMESS_TOOBIG,
string_sprintf("message too big (max=%d)", thismessage_size_limit),
- US"message rejected: ", error_rc, data_file, header_list);
+ US"message rejected: ", error_rc, spool_data_file, header_list);
/* Does not return */
}
break;
the input in cases of output errors, since the far end doesn't expect to see
anything until the terminating dot line is sent. */
-if (fflush(data_file) == EOF || ferror(data_file) ||
- EXIMfsync(fileno(data_file)) < 0 || (receive_ferror)())
+if (fflush(spool_data_file) == EOF || ferror(spool_data_file) ||
+ EXIMfsync(fileno(spool_data_file)) < 0 || (receive_ferror)())
{
uschar *msg_errno = US strerror(errno);
BOOL input_error = (receive_ferror)() != 0;
else
{
- fseek(data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
- give_local_error(ERRMESS_IOERR, msg, US"", error_rc, data_file,
+ fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
+ give_local_error(ERRMESS_IOERR, msg, US"", error_rc, spool_data_file,
header_list);
/* Does not return */
}
}
}
- fseek(data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
+ fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
/* If configured to send errors to the sender, but this fails, force
a failure error code. We use a special one for no recipients so that it
(bad_addresses == NULL)?
(extracted_ignored? ERRMESS_IGADDRESS : ERRMESS_NOADDRESS) :
(recipients_list == NULL)? ERRMESS_BADNOADDRESS : ERRMESS_BADADDRESS,
- bad_addresses, header_list, data_file, FALSE))
+ bad_addresses, header_list, spool_data_file, FALSE))
error_rc = (bad_addresses == NULL)? EXIT_NORECIPIENTS : EXIT_FAILURE;
}
else
if (recipients_count == 0 || error_handling == ERRORS_STDERR)
{
Uunlink(spool_name);
- (void)fclose(data_file);
+ (void)fclose(spool_data_file);
exim_exit(error_rc, US"receiving");
}
}
/* Does not return */
else
{
- fseek(data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
+ fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
give_local_error(ERRMESS_LOCAL_ACL, user_msg,
- US"message rejected by non-SMTP ACL: ", error_rc, data_file,
+ US"message rejected by non-SMTP ACL: ", error_rc, spool_data_file,
header_list);
/* Does not return */
}
}
else
{
- fseek(data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
+ fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
give_local_error(ERRMESS_LOCAL_SCAN, errmsg,
- US"message rejected by local scan code: ", error_rc, data_file,
+ US"message rejected by local scan code: ", error_rc, spool_data_file,
header_list);
/* Does not return */
}
}
else
{
- fseek(data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
- give_local_error(ERRMESS_IOERR, errmsg, US"", error_rc, data_file,
+ fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
+ give_local_error(ERRMESS_IOERR, errmsg, US"", error_rc, spool_data_file,
header_list);
/* Does not return */
}
precedes the data. This total differs from message_size in that it include the
added Received: header and any other headers that got created locally. */
-if (fflush(data_file))
+if (fflush(spool_data_file))
{
errmsg = string_sprintf("Spool write error: %s", strerror(errno));
log_write(0, LOG_MAIN, "%s\n", errmsg);
}
else
{
- fseek(data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
- give_local_error(ERRMESS_IOERR, errmsg, US"", error_rc, data_file,
+ fseek(spool_data_file, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
+ give_local_error(ERRMESS_IOERR, errmsg, US"", error_rc, spool_data_file,
header_list);
/* Does not return */
}
TIDYUP:
process_info[process_info_len] = 0; /* Remove message id */
-if (data_file && cutthrough_done == NOT_TRIED)
- if (fclose(data_file)) /* Frees the lock */
+if (spool_data_file && cutthrough_done == NOT_TRIED)
+ {
+ if (fclose(spool_data_file)) /* Frees the lock */
log_write(0, LOG_MAIN|LOG_PANIC,
"spoolfile error on close: %s", strerror(errno));
+ spool_data_file = NULL;
+ }
/* Now reset signal handlers to their defaults */
}
if (cutthrough_done != NOT_TRIED)
{
- if (data_file)
- (void) fclose(data_file); /* Frees the lock; do not care if error */
+ if (spool_data_file)
+ {
+ (void) fclose(spool_data_file); /* Frees the lock; do not care if error */
+ spool_data_file = NULL;
+ }
message_id[0] = 0; /* Prevent a delivery from starting */
cutthrough.delivery = cutthrough.callout_hold_only = FALSE;
cutthrough.defer_pass = FALSE;
projects / exim.git / blobdiff