-/* $Cambridge: exim/src/src/macros.h,v 1.25 2006/06/27 14:34:26 ph10 Exp $ */
-
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2006 */
+/* Copyright (c) University of Cambridge 1995 - 2012 */
/* See the file NOTICE for conditions of use and distribution. */
#define mac_expanded_string(s) mac_string(s)
+/* When running in the test harness, the load average is fudged. */
+
+#define OS_GETLOADAVG() \
+ (running_in_test_harness? (test_harness_load_avg += 10) : os_getloadavg())
+
+
/* The address_item structure has a word full of 1-bit flags. These macros
manipulate them. */
((uschar)(c) > 127 && print_topbitchars))
+/* Convenience for testing strings */
+
+#define streqic(Foo, Bar) (strcmpic(Foo, Bar) == 0)
+
+
/* When built with TLS support, the act of flushing SMTP output becomes
a no-op once an SSL session is in progress. */
#ifdef SUPPORT_TLS
-#define mac_smtp_fflush() if (tls_active < 0) fflush(smtp_out);
+#define mac_smtp_fflush() if (tls_in.active < 0) fflush(smtp_out);
#else
#define mac_smtp_fflush() fflush(smtp_out);
#endif
/* A macro to simplify testing bits in lookup types */
-#define mac_islookup(a,b) ((lookup_list[a].type & (b)) != 0)
+#define mac_islookup(a,b) ((lookup_list[a]->type & (b)) != 0)
/* Debugging control */
#define DEBUG(x) if ((debug_selector & (x)) != 0)
#define HDEBUG(x) if (host_checking || (debug_selector & (x)) != 0)
+/* The default From: text for DSNs */
+
+#define DEFAULT_DSN_FROM "Mail Delivery System <Mailer-Daemon@$qualify_domain>"
+
/* The size of the vector for saving/restoring address expansion pointers while
verifying. This has to be explicit because it is referenced in more than one
source module. */
#define LOG_BUFFER_SIZE 8192
+/* The size of the circular buffer that remembers recent SMTP commands */
+
+#define SMTP_HBUFF_SIZE 20
+
/* The initial size of a big buffer for use in various places. It gets put
into big_buffer_size and in some circumstances increased. It should be at least
as long as the maximum path length. */
/* Argument values for the time-of-day function */
-enum { tod_log, tod_log_bare, tod_log_zone, tod_log_datestamp,
- tod_zone, tod_full, tod_bsdin, tod_mbx, tod_epoch, tod_zulu };
+enum { tod_log, tod_log_bare, tod_log_zone, tod_log_datestamp_daily,
+ tod_log_datestamp_monthly, tod_zone, tod_full, tod_bsdin,
+ tod_mbx, tod_epoch, tod_epoch_l, tod_zulu };
/* For identifying types of driver */
#define LX_incoming_interface 0x80000020
#define LX_incoming_port 0x80000040
#define LX_outgoing_port 0x80000080
-#define LX_queue_time 0x80000100
-#define LX_queue_time_overall 0x80000200
-#define LX_received_sender 0x80000400
-#define LX_received_recipients 0x80000800
-#define LX_rejected_header 0x80001000
-#define LX_return_path_on_delivery 0x80002000
-#define LX_sender_on_delivery 0x80004000
-#define LX_sender_verify_fail 0x80008000
-#define LX_smtp_confirmation 0x80010000
-#define LX_subject 0x80020000
-#define LX_tls_certificate_verified 0x80040000
-#define LX_tls_cipher 0x80080000
-#define LX_tls_peerdn 0x80100000
-#define LX_unknown_in_list 0x80200000
+#define LX_pid 0x80000100
+#define LX_queue_time 0x80000200
+#define LX_queue_time_overall 0x80000400
+#define LX_received_sender 0x80000800
+#define LX_received_recipients 0x80001000
+#define LX_rejected_header 0x80002000
+#define LX_return_path_on_delivery 0x80004000
+#define LX_sender_on_delivery 0x80008000
+#define LX_sender_verify_fail 0x80010000
+#define LX_smtp_confirmation 0x80020000
+#define LX_smtp_no_mail 0x80040000
+#define LX_subject 0x80080000
+#define LX_tls_certificate_verified 0x80100000
+#define LX_tls_cipher 0x80200000
+#define LX_tls_peerdn 0x80400000
+#define LX_tls_sni 0x80800000
+#define LX_unknown_in_list 0x81000000
+#define LX_8bitmime 0x82000000
#define L_default (L_connection_reject | \
L_delay_delivery | \
#define LX_default ((LX_acl_warn_skipped | \
LX_rejected_header | \
LX_sender_verify_fail | \
+ LX_smtp_confirmation | \
LX_tls_cipher) & 0x7fffffff)
/* Private error numbers for delivery failures, set negative so as not
#define opt_public 0x200 /* Stored in the main instance block */
#define opt_set 0x400 /* Option is set */
#define opt_secure 0x800 /* "hide" prefix used */
-#define opt_mask 0x0ff
+#define opt_rep_con 0x1000 /* Can be appended to by a repeated line (condition) */
+#define opt_rep_str 0x2000 /* Can be appended to by a repeated line (string) */
+#define opt_mask 0x00ff
/* Verify types when directing and routing */
#define ccache_unknown 0 /* test hasn't been done */
#define ccache_accept 1
-#define ccache_reject 2
+#define ccache_reject 2 /* All rejections except */
+#define ccache_reject_mfnull 3 /* MAIL FROM:<> was rejected */
/* Options for lookup functions */
#define LOG_MAIN 1 /* Write to the main log */
#define LOG_PANIC 2 /* Write to the panic log */
#define LOG_PANIC_DIE 6 /* Write to the panic log and then die */
-#define LOG_PROCESS 8 /* Write to the process log */
#define LOG_REJECT 16 /* Write to the reject log, with headers */
#define LOG_SENDER 32 /* Add raw sender to the message */
#define LOG_RECIPIENTS 64 /* Add raw recipients to the message */
#define LOG_CONFIG_FOR (256+128) /* Add " for" instead of ":\n" */
#define LOG_CONFIG_IN (512+128) /* Add " in line x[ of file y]" */
+/* and for debug_bits() logging action control: */
+#define DEBUG_FROM_CONFIG 0x0001
+
+/* SMTP command identifiers for the smtp_connection_had field that records the
+most recent SMTP commands. Must be kept in step with the list of names in
+smtp_in.c that is used for creating the smtp_no_mail logging action. SCH_NONE
+is "empty". */
+
+enum { SCH_NONE, SCH_AUTH, SCH_DATA, SCH_EHLO, SCH_ETRN, SCH_EXPN, SCH_HELO,
+ SCH_HELP, SCH_MAIL, SCH_NOOP, SCH_QUIT, SCH_RCPT, SCH_RSET, SCH_STARTTLS,
+ SCH_VRFY };
+
/* Returns from host_find_by{name,dns}() */
enum {
enum { MSG_DELIVER, MSG_FREEZE, MSG_REMOVE, MSG_THAW, MSG_ADD_RECIPIENT,
MSG_MARK_ALL_DELIVERED, MSG_MARK_DELIVERED, MSG_EDIT_SENDER,
+ MSG_SHOW_COPY, MSG_LOAD,
+ /* These ones must be last: a test for >= MSG_SHOW_BODY is used
+ to test for actions that list individual spool files. */
MSG_SHOW_BODY, MSG_SHOW_HEADER, MSG_SHOW_LOG };
/* Returns from the spool_read_header() function */
#define topt_no_body 0x040 /* Omit body */
#define topt_escape_headers 0x080 /* Apply escape check to headers */
-/* Codes for the host_find_failed option. */
+/* Codes for the host_find_failed and host_all_ignored options. */
#define hff_freeze 0
#define hff_defer 1
#define hff_pass 2
#define hff_decline 3
#define hff_fail 4
+#define hff_ignore 5
/* Router information flags */
ACL_WHERE_MAIL, /* ) */
ACL_WHERE_PREDATA, /* ) There are several tests for "in message", */
ACL_WHERE_MIME, /* ) implemented by <= WHERE_NOTSMTP */
+ ACL_WHERE_DKIM, /* ) */
ACL_WHERE_DATA, /* ) */
ACL_WHERE_NOTSMTP, /* ) */
ACL_WHERE_EXPN,
ACL_WHERE_HELO,
ACL_WHERE_MAILAUTH,
+ ACL_WHERE_NOTSMTP_START,
+ ACL_WHERE_NOTQUIT,
ACL_WHERE_QUIT,
ACL_WHERE_STARTTLS,
- ACL_WHERE_VRFY
+ ACL_WHERE_VRFY,
+
+ ACL_WHERE_DELIVERY,
+ ACL_WHERE_UNKNOWN /* Currently used by a ${acl:name} expansion */
};
/* Situations for spool_write_header() */
projects / exim.git / blobdiff