#!PERL_COMMAND
-# $Cambridge: exim/src/src/exipick.src,v 1.1 2004/10/07 10:39:01 ph10 Exp $
+# Copyright (c) 1995 - 2018 University of Cambridge.
+# See the file NOTICE for conditions of use and distribution.
-# This variable should be set by the building process to Exim's spool directory.
-my $spool = 'SPOOL_DIRECTORY';
+
+# This variables should be set by the building process
+my $spool = 'SPOOL_DIRECTORY'; # may be overridden later
+my $exim = 'BIN_DIRECTORY/exim';
+
+# Need to set this dynamically during build, but it's not used right now anyway.
+my $charset = 'ISO-8859-1';
+
+# use 'exipick --help' to view documentation for this program.
+# Documentation also viewable online at
+# http://www.exim.org/eximwiki/ToolExipickManPage
use strict;
+BEGIN { pop @INC if $INC[-1] eq '.' };
use Getopt::Long;
+use File::Basename;
my($p_name) = $0 =~ m|/?([^/]+)$|;
-my $p_version = "20040725.0";
+my $p_version = "20100323.0";
my $p_usage = "Usage: $p_name [--help|--version] (see --help for details)";
my $p_cp = <<EOM;
- Copyright (c) 2003-2004 John Jetmore <jj33\@pobox.com>
+ Copyright (c) 2003-2010 John Jetmore <jj33\@pobox.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
EOM
ext_usage(); # before we do anything else, check for --help
+$| = 1; # unbuffer STDOUT
+
Getopt::Long::Configure("bundling_override");
GetOptions(
- 'spool:s' => \$G::spool, # exim spool dir
- 'bp' => \$G::mailq_bp, # List the queue (noop - default)
- 'bpa' => \$G::mailq_bpa, # ... with generated address as well
- 'bpc' => \$G::mailq_bpc, # ... but just show a count of messages
- 'bpr' => \$G::mailq_bpr, # ... do not sort
- 'bpra' => \$G::mailq_bpra, # ... with generated addresses, unsorted
- 'bpru' => \$G::mailq_bpru, # ... only undelivered addresses, unsorted
- 'bpu' => \$G::mailq_bpu, # ... only undelivered addresses
- 'and' => \$G::and, # 'and' the criteria (default)
- 'or' => \$G::or, # 'or' the criteria
- 'f:s' => \$G::qgrep_f, # from regexp
- 'r:s' => \$G::qgrep_r, # recipient regexp
- #'s:s' => \$G::qgrep_s, # match against size field
- 'y:s' => \$G::qgrep_y, # message younger than (secs)
- 'o:s' => \$G::qgrep_o, # message older than (secs)
- 'z' => \$G::qgrep_z, # frozen only
- 'x' => \$G::qgrep_x, # non-frozen only
- 'c' => \$G::qgrep_c, # display match count
- 'l' => \$G::qgrep_l, # long format (default)
- 'i' => \$G::qgrep_i, # message ids only
- 'b' => \$G::qgrep_b, # brief format
- 'flatq' => \$G::flatq, # brief format
- 'show-vars:s' => \$G::show_vars, # display the contents of these vars
- 'show-rules' => \$G::show_rules # display compiled match rules
+ 'spool=s' => \$G::spool, # exim spool dir
+ 'C|Config=s' => \$G::config, # use alternative Exim configuration file
+ 'input-dir=s' => \$G::input_dir, # name of the "input" dir
+ 'queue=s' => \$G::queue, # name of the queue
+ 'finput' => \$G::finput, # same as "--input-dir Finput"
+ 'bp' => \$G::mailq_bp, # List the queue (noop - default)
+ 'bpa' => \$G::mailq_bpa, # ... with generated address as well
+ 'bpc' => \$G::mailq_bpc, # ... but just show a count of messages
+ 'bpr' => \$G::mailq_bpr, # ... do not sort
+ 'bpra' => \$G::mailq_bpra, # ... with generated addresses, unsorted
+ 'bpru' => \$G::mailq_bpru, # ... only undelivered addresses, unsorted
+ 'bpu' => \$G::mailq_bpu, # ... only undelivered addresses
+ 'and' => \$G::and, # 'and' the criteria (default)
+ 'or' => \$G::or, # 'or' the criteria
+ 'f=s' => \$G::qgrep_f, # from regexp
+ 'r=s' => \$G::qgrep_r, # recipient regexp
+ 's=s' => \$G::qgrep_s, # match against size field
+ 'y=s' => \$G::qgrep_y, # message younger than (secs)
+ 'o=s' => \$G::qgrep_o, # message older than (secs)
+ 'z' => \$G::qgrep_z, # frozen only
+ 'x' => \$G::qgrep_x, # non-frozen only
+ 'c' => \$G::qgrep_c, # display match count
+ 'l' => \$G::qgrep_l, # long format (default)
+ 'i' => \$G::qgrep_i, # message ids only
+ 'b' => \$G::qgrep_b, # brief format
+ 'size' => \$G::size_only, # sum the size of the matching msgs
+ 'not' => \$G::negate, # flip every test
+ 'R|reverse' => \$G::reverse, # reverse output (-R is qgrep option)
+ 'sort=s' => \@G::sort, # allow you to choose variables to sort by
+ 'freeze=s' => \$G::freeze, # freeze data in this file
+ 'thaw=s' => \$G::thaw, # thaw data from this file
+ 'unsorted' => \$G::unsorted, # unsorted, regardless of output format
+ 'random' => \$G::random, # (poorly) randomize evaluation order
+ 'flatq' => \$G::flatq, # brief format
+ 'caseful' => \$G::caseful, # in '=' criteria, respect case
+ 'caseless' => \$G::caseless, # ...ignore case (default)
+ 'charset=s' => \$charset, # charset for $bh and $h variables
+ 'show-vars=s' => \$G::show_vars, # display the contents of these vars
+ 'just-vars' => \$G::just_vars, # only display vars, no other info
+ 'show-rules' => \$G::show_rules, # display compiled match rules
+ 'show-tests' => \$G::show_tests, # display tests as applied to each message
+ 'version' => sub {
+ print basename($0) . ": $0\n",
+ "build: EXIM_RELEASE_VERSIONEXIM_VARIANT_VERSION\n",
+ "perl(runtime): $]\n";
+ exit 0;
+ },
) || exit(1);
-push(@ARGV, "\$sender_address =~ /$G::qgrep_f/") if ($G::qgrep_f);
-push(@ARGV, "\$recipients =~ /$G::qgrep_r/") if ($G::qgrep_r);
-push(@ARGV, "\$message_age < $G::qgrep_y") if ($G::qgrep_y);
-push(@ARGV, "\$message_age > $G::qgrep_o") if ($G::qgrep_o);
-push(@ARGV, "\$deliver_freeze") if ($G::qgrep_z);
-push(@ARGV, "!\$deliver_freeze") if ($G::qgrep_x);
-$G::mailq_bp = $G::mailq_bp; # shut up -w
-$G::and = $G::and; # shut up -w
-$spool = $G::spool if ($G::spool);
-my $count_only = 1 if ($G::mailq_bpc || $G::qgrep_c);
-my $unsorted = 1 if ($G::mailq_bpr || $G::mailq_bpra || $G::mailq_bpru);
-my $msg = get_all_msgs($spool, $unsorted);
-my $crit = process_criteria(\@ARGV);
-my $e = Exim::SpoolFile->new();
-my $tcount = 0 if ($count_only);
-my $mcount = 0 if ($count_only);
-$e->set_spool($spool);
-$e->set_undelivered_only(1) if ($G::mailq_bpru || $G::mailq_bpu);
-$e->set_show_generated(1) if ($G::mailq_bpa || $G::mailq_bpra);
-$e->output_long() if ($G::qgrep_l);
-$e->output_idonly() if ($G::qgrep_i);
-$e->output_brief() if ($G::qgrep_b);
-$e->output_flatq() if ($G::flatq);
+# if both freeze and thaw specified, only thaw as it is less destructive
+$G::freeze = undef if ($G::freeze && $G::thaw);
+freeze_start() if ($G::freeze);
+thaw_start() if ($G::thaw);
+
+# massage sort options (make '$var,Var:' be 'var','var')
+for (my $i = scalar(@G::sort)-1; $i >= 0; $i--) {
+ $G::sort[$i] = lc($G::sort[$i]);
+ $G::sort[$i] =~ s/[\$:\s]//g;
+ if ((my @vars = split(/,/, $G::sort[$i])) > 1) {
+ $G::sort[$i] = $vars[0]; shift(@vars); # replace current slot w/ first var
+ splice(@G::sort, $i+1, 0, @vars); # add other vars after current pos
+ }
+}
+push(@G::sort, "message_exim_id") if (@G::sort);
+die "empty value provided to --sort not allowed, exiting\n"
+ if (grep /^\s*$/, @G::sort);
+
+# massage the qgrep options into standard criteria
+push(@ARGV, "\$sender_address =~ /$G::qgrep_f/") if ($G::qgrep_f);
+push(@ARGV, "\$recipients =~ /$G::qgrep_r/") if ($G::qgrep_r);
+push(@ARGV, "\$shown_message_size eq $G::qgrep_s") if ($G::qgrep_s);
+push(@ARGV, "\$message_age < $G::qgrep_y") if ($G::qgrep_y);
+push(@ARGV, "\$message_age > $G::qgrep_o") if ($G::qgrep_o);
+push(@ARGV, "\$deliver_freeze") if ($G::qgrep_z);
+push(@ARGV, "!\$deliver_freeze") if ($G::qgrep_x);
+
+$G::mailq_bp = $G::mailq_bp; # shut up -w
+$G::and = $G::and; # shut up -w
+$G::msg_ids = {}; # short circuit when crit is only MID
+$G::caseless = $G::caseful ? 0 : 1; # nocase by default, case if both
+@G::recipients_crit = (); # holds per-recip criteria
+$spool = defined $G::spool ? $G::spool
+ : do { chomp($_ = `$exim @{[defined $G::config ? "-C $G::config" : '']} -n -bP spool_directory`)
+ and $_ or $spool };
+my $input_dir = (defined $G::queue ? "$G::queue/" : '')
+ . (defined $G::input_dir || ($G::finput ? "Finput" : "input"));
+my $count_only = 1 if ($G::mailq_bpc || $G::qgrep_c);
+my $unsorted = 1 if ($G::mailq_bpr || $G::mailq_bpra ||
+ $G::mailq_bpru || $G::unsorted);
+my $msg = $G::thaw ? thaw_message_list()
+ : get_all_msgs($spool, $input_dir, $unsorted,
+ $G::reverse, $G::random);
+die "Problem accessing thaw file\n" if ($G::thaw && !$msg);
+my $crit = process_criteria(\@ARGV);
+my $e = Exim::SpoolFile->new();
+my $tcount = 0 if ($count_only); # holds count of all messages
+my $mcount = 0 if ($count_only); # holds count of matching messages
+my $total_size = 0 if ($G::size_only);
+$e->set_undelivered_only(1) if ($G::mailq_bpru || $G::mailq_bpu);
+$e->set_show_generated(1) if ($G::mailq_bpra || $G::mailq_bpa);
+$e->output_long() if ($G::qgrep_l);
+$e->output_idonly() if ($G::qgrep_i);
+$e->output_brief() if ($G::qgrep_b);
+$e->output_flatq() if ($G::flatq);
+$e->output_vars_only() if ($G::just_vars && $G::show_vars);
$e->set_show_vars($G::show_vars) if ($G::show_vars);
+$e->set_spool($spool, $input_dir);
MSG:
foreach my $m (@$msg) {
- if (!$e->parse_message($m->{message})) {
- warn "Couldn't parse $m->{message}: ".$e->error()."\n";
- next(MSG);
+ next if (scalar(keys(%$G::msg_ids)) && !$G::or
+ && !$G::msg_ids->{$m->{message}});
+ if ($G::thaw) {
+ my $data = thaw_data();
+ if (!$e->restore_state($data)) {
+ warn "Couldn't thaw $data->{_message}: ".$e->error()."\n";
+ next MSG;
+ }
+ } else {
+ if (!$e->parse_message($m->{message}, $m->{path})) {
+ warn "Couldn't parse $m->{message}: ".$e->error()."\n";
+ next MSG;
+ }
}
$tcount++;
my $match = 0;
+ my @local_crit = ();
+ foreach my $c (@G::recipients_crit) { # handle each_recip* vars
+ foreach my $addr (split(/, /, $e->get_var($c->{var}))) {
+ my %t = ( 'cmp' => $c->{cmp}, 'var' => $c->{var} );
+ $t{cmp} =~ s/"?\$var"?/'$addr'/;
+ push(@local_crit, \%t);
+ }
+ }
+ if ($G::show_tests) { print $e->get_var('message_exim_id'), "\n"; }
CRITERIA:
- foreach my $c (@$crit) {
+ foreach my $c (@$crit, @local_crit) {
my $var = $e->get_var($c->{var});
my $ret = eval($c->{cmp});
+ if ($G::show_tests) {
+ printf " %25s = '%s'\n %25s => $ret\n",$c->{var},$var,$c->{cmp},$ret;
+ }
if ($@) {
print STDERR "Error in eval '$c->{cmp}': $@\n";
- next(MSG);
+ next MSG;
} elsif ($ret) {
$match = 1;
- if ($G::or) { last(CRITERIA); }
- else { next(CRITERIA); }
+ if ($G::or) { last CRITERIA; }
+ else { next CRITERIA; }
} else { # no match
- if ($G::or) { next(CRITERIA); }
- else { next(MSG); }
+ if ($G::or) { next CRITERIA; }
+ else { next MSG; }
}
}
- next(MSG) if (scalar(@$crit) > 0 && !$match);
- if ($count_only) {
+ # skip this message if any criteria were supplied and it didn't match
+ next MSG if ((scalar(@$crit) || scalar(@local_crit)) && !$match);
+
+ if ($count_only || $G::size_only) {
$mcount++;
+ $total_size += $e->get_var('message_size');
} else {
- $e->print_message(\*STDOUT);
+ if (@G::sort) {
+ # if we are defining criteria to sort on, save the message here. If
+ # we don't save here and do the sort later, we have a chicken/egg
+ # problem
+ push(@G::to_print, { vars => {}, output => "" });
+ foreach my $var (@G::sort) {
+ # save any values we want to sort on. I don't like doing the internal
+ # struct access here, but calling get_var a bunch can be _slow_ =(
+ $G::sort_type{$var} ||= '<=>';
+ $G::to_print[-1]{vars}{$var} = $e->{_vars}{$var};
+ $G::sort_type{$var} = 'cmp' if ($G::to_print[-1]{vars}{$var} =~ /\D/);
+ }
+ $G::to_print[-1]{output} = $e->format_message();
+ } else {
+ print $e->format_message();
+ }
+ }
+
+ if ($G::freeze) {
+ freeze_data($e->get_state());
+ push(@G::frozen_msgs, $m);
+ }
+}
+
+if (@G::to_print) {
+ msg_sort(\@G::to_print, \@G::sort, $G::reverse);
+ foreach my $msg (@G::to_print) {
+ print $msg->{output};
}
}
-if ($G::mailq_bpc) {
- print "$tcount\n";
-} elsif ($G::qgrep_c) {
- print "$mcount matches out of $tcount messages\n";
+if ($G::qgrep_c) {
+ print "$mcount matches out of $tcount messages" .
+ ($G::size_only ? " ($total_size)" : "") . "\n";
+} elsif ($G::mailq_bpc) {
+ print "$mcount" . ($G::size_only ? " ($total_size)" : "") . "\n";
+} elsif ($G::size_only) {
+ print "$total_size\n";
+}
+
+if ($G::freeze) {
+ freeze_message_list(\@G::frozen_msgs);
+ freeze_end();
+} elsif ($G::thaw) {
+ thaw_end();
}
exit;
+# sender_address_domain,shown_message_size
+sub msg_sort {
+ my $msgs = shift;
+ my $vars = shift;
+ my $reverse = shift;
+
+ my @pieces = ();
+ foreach my $v (@G::sort) {
+ push(@pieces, "\$a->{vars}{\"$v\"} $G::sort_type{$v} \$b->{vars}{\"$v\"}");
+ }
+ my $sort_str = join(" || ", @pieces);
+
+ @$msgs = sort { eval $sort_str } (@$msgs);
+ @$msgs = reverse(@$msgs) if ($reverse);
+}
+
+sub try_load {
+ my $mod = shift;
+
+ eval("use $mod");
+ return $@ ? 0 : 1;
+}
+
+# FREEZE FILE FORMAT:
+# message_data_bytes
+# message_data
+# <...>
+# EOM
+# message_list
+# message_list_bytes <- 10 bytes, zero-packed, plus \n
+
+sub freeze_start {
+ eval("use Storable");
+ die "Storable module not found: $@\n" if ($@);
+ open(O, ">$G::freeze") || die "Can't open freeze file $G::freeze: $!\n";
+ $G::freeze_handle = \*O;
+}
+
+sub freeze_end {
+ close($G::freeze_handle);
+}
+
+sub thaw_start {
+ eval("use Storable");
+ die "Storable module not found: $@\n" if ($@);
+ open(I, "<$G::thaw") || die "Can't open freeze file $G::thaw: $!\n";
+ $G::freeze_handle = \*I;
+}
+
+sub thaw_end {
+ close($G::freeze_handle);
+}
+
+sub freeze_data {
+ my $h = Storable::freeze($_[0]);
+ print $G::freeze_handle length($h)+1, "\n$h\n";
+}
+
+sub freeze_message_list {
+ my $h = Storable::freeze($_[0]);
+ my $l = length($h) + 1;
+ printf $G::freeze_handle "EOM\n$l\n$h\n%010d\n", $l+11+length($l)+1;
+}
+
+sub thaw_message_list {
+ my $orig_pos = tell($G::freeze_handle);
+ seek($G::freeze_handle, -11, 2);
+ chomp(my $bytes = <$G::freeze_handle>);
+ seek($G::freeze_handle, $bytes * -1, 2);
+ my $obj = thaw_data();
+ seek($G::freeze_handle, 0, $orig_pos);
+ return($obj);
+}
+
+sub thaw_data {
+ my $obj;
+ chomp(my $bytes = <$G::freeze_handle>);
+ return(undef) if (!$bytes || $bytes eq 'EOM');
+ my $read = read(I, $obj, $bytes);
+ die "Format error in thaw file (expected $bytes bytes, got $read)\n"
+ if ($bytes != $read);
+ chomp($obj);
+ return(Storable::thaw($obj));
+}
+
sub process_criteria {
my $a = shift;
my @c = ();
my $e = 0;
foreach (@$a) {
- foreach my $t ('@') { s/$t/\\$t/g; } # '$'
+ foreach my $t ('@') { s/$t/\\$t/g; }
if (/^(.*?)\s+(<=|>=|==|!=|<|>)\s+(.*)$/) {
#print STDERR "found as integer\n";
my $v = $1; my $o = $2; my $n = $3;
- if ($n =~ /^([\d\.]+)M$/) { $n = $1 * 1024 * 1024; }
- elsif ($n =~ /^([\d\.]+)K$/) { $n = $1 * 1024; }
- elsif ($n =~ /^([\d\.]+)B?$/) { $n = $1; }
- elsif ($n =~ /^([\d\.]+)d$/) { $n = $1 * 60 * 60 * 24; }
- elsif ($n =~ /^([\d\.]+)h$/) { $n = $1 * 60 * 60; }
- elsif ($n =~ /^([\d\.]+)m$/) { $n = $1 * 60; }
- elsif ($n =~ /^([\d\.]+)s?$/) { $n = $1; }
+ if ($n =~ /^(-?[\d\.]+)M$/) { $n = $1 * 1024 * 1024; }
+ elsif ($n =~ /^(-?[\d\.]+)K$/) { $n = $1 * 1024; }
+ elsif ($n =~ /^(-?[\d\.]+)B?$/) { $n = $1; }
+ elsif ($n =~ /^(-?[\d\.]+)d$/) { $n = $1 * 60 * 60 * 24; }
+ elsif ($n =~ /^(-?[\d\.]+)h$/) { $n = $1 * 60 * 60; }
+ elsif ($n =~ /^(-?[\d\.]+)m$/) { $n = $1 * 60; }
+ elsif ($n =~ /^(-?[\d\.]+)s?$/) { $n = $1; }
else {
print STDERR "Expression $_ did not parse: numeric comparison with ",
"non-number\n";
$e = 1;
next;
}
- push(@c, { var => lc($v), cmp => "(\$var $o $n) ? 1 : 0" });
+ push(@c, { var => lc($v), cmp => "(\$var $o $n)" });
} elsif (/^(.*?)\s+(=~|!~)\s+(.*)$/) {
#print STDERR "found as string regexp\n";
- push(@c, { var => lc($1), cmp => "(\"\$var\" $2 $3) ? 1 : 0" });
+ push(@c, { var => lc($1), cmp => "(\"\$var\" $2 $3)" });
} elsif (/^(.*?)\s+=\s+(.*)$/) {
#print STDERR "found as bare string regexp\n";
- push(@c, { var => lc($1), cmp => "(\"\$var\" =~ /$2/) ? 1 : 0" });
+ my $case = $G::caseful ? '' : 'i';
+ push(@c, { var => lc($1), cmp => "(\"\$var\" =~ /$2/$case)" });
+ # quote special characters in perl text string
+ #foreach my $t ('@') { $c[-1]{cmp} =~ s/$t/\\$t/g; }
} elsif (/^(.*?)\s+(eq|ne)\s+(.*)$/) {
#print STDERR "found as string cmp\n";
- push(@c, { var => lc($1), cmp => "(\"\$var\" $2 \"$3\") ? 1 : 0" });
- } elsif (/^(!)?(\S+)$/) {
+ my $var = lc($1); my $op = $2; my $val = $3;
+ $val =~ s|^(['"])(.*)\1$|$2|;
+ push(@c, { var => $var, cmp => "(\"\$var\" $op \"$val\")" });
+ if (($var eq 'message_id' || $var eq 'message_exim_id') && $op eq "eq") {
+ #print STDERR "short circuit @c[-1]->{cmp} $val\n";
+ $G::msg_ids->{$val} = 1;
+ }
+ #foreach my $t ('@') { $c[-1]{cmp} =~ s/$t/\\$t/g; }
+ } elsif (/^(\S+)$/) {
#print STDERR "found as boolean\n";
- push(@c, { var => lc($2), cmp => "($1\$var) ? 1 : 0" });
+ push(@c, { var => lc($1), cmp => "(\$var)" });
} else {
print STDERR "Expression $_ did not parse\n";
$e = 1;
+ next;
+ }
+ # assign the results of the cmp test here (handle "!" negation)
+ # also handle global --not negation
+ if ($c[-1]{var} =~ s|^!||) {
+ $c[-1]{cmp} .= $G::negate ? " ? 1 : 0" : " ? 0 : 1";
+ } else {
+ $c[-1]{cmp} .= $G::negate ? " ? 0 : 1" : " ? 1 : 0";
+ }
+ # support the each_* pseudo variables. Steal the criteria off of the
+ # queue for special processing later
+ if ($c[-1]{var} =~ /^each_(recipients(_(un)?del)?)$/) {
+ my $var = $1;
+ push(@G::recipients_crit,pop(@c));
+ $G::recipients_crit[-1]{var} = $var; # remove each_ from the variable
}
}
}
sub get_all_msgs {
- my $d = shift() . '/input';
- my $u = shift;
+ my $d = shift();
+ my $i = shift();
+ my $u = shift; # don't sort
+ my $r = shift; # right before returning, reverse order
+ my $o = shift; # if true, randomize list order before returning
my @m = ();
+ if ($i =~ m|^/|) { $d = $i; } else { $d = $d . '/' . $i; }
+
opendir(D, "$d") || die "Couldn't opendir $d: $!\n";
foreach my $e (grep !/^\./, readdir(D)) {
if ($e =~ /^[a-zA-Z0-9]$/) {
opendir(DD, "$d/$e") || next;
foreach my $f (grep !/^\./, readdir(DD)) {
- push(@m, { message => $1, path => "$e/$1" }) if ($f =~ /^(.{16})-H$/);
+ push(@m, { message => $1, path => "$d/$e" }) if ($f =~ /^(.{16})-H$/);
}
closedir(DD);
} elsif ($e =~ /^(.{16})-H$/) {
- push(@m, { message => $1, path => $1 });
+ push(@m, { message => $1, path => $d });
}
}
closedir(D);
- return($u ? \@m : [ sort { $a->{message} cmp $b->{message} } @m ]);
+ if ($o) {
+ my $c = scalar(@m);
+ # loop twice to pretend we're doing a good job of mixing things up
+ for (my $i = 0; $i < 2 * $c; $i++) {
+ my $rand = int(rand($c));
+ ($m[$i % $c],$m[$rand]) = ($m[$rand],$m[$i % $c]);
+ }
+ } elsif (!$u) {
+ @m = sort { $a->{message} cmp $b->{message} } @m;
+ }
+ @m = reverse(@m) if ($r);
+
+ return(\@m);
}
BEGIN {
package Exim::SpoolFile;
-$Exim::SpoolFile::ACL_C_MAX = 10;
-#$Exim::SpoolFile::ACL_M_MAX = 10;
+# versions 4.61 and higher will not need these variables anymore, but they
+# are left for handling legacy installs
+$Exim::SpoolFile::ACL_C_MAX_LEGACY = 10;
+#$Exim::SpoolFile::ACL_M_MAX _LEGACY= 10;
sub new {
my $class = shift;
bless($self, $class);
$self->{_spool_dir} = '';
+ $self->{_input_path} = '';
$self->{_undelivered_only} = 0;
$self->{_show_generated} = 0;
$self->{_output_long} = 1;
$self->{_output_idonly} = 0;
$self->{_output_brief} = 0;
$self->{_output_flatq} = 0;
- $self->{_show_vars} = {};
+ $self->{_output_vars_only} = 0;
+ $self->{_show_vars} = [];
$self->_reset();
return($self);
$self->{_output_idonly} = 0;
$self->{_output_brief} = 0;
$self->{_output_flatq} = 0;
+ $self->{_output_vars_only} = 0;
}
sub output_idonly {
$self->{_output_idonly} = 1;
$self->{_output_brief} = 0;
$self->{_output_flatq} = 0;
+ $self->{_output_vars_only} = 0;
}
sub output_brief {
$self->{_output_idonly} = 0;
$self->{_output_brief} = 1;
$self->{_output_flatq} = 0;
+ $self->{_output_vars_only} = 0;
}
sub output_flatq {
$self->{_output_idonly} = 0;
$self->{_output_brief} = 0;
$self->{_output_flatq} = 1;
+ $self->{_output_vars_only} = 0;
+}
+
+sub output_vars_only {
+ my $self = shift;
+
+ $self->{_output_long} = 0;
+ $self->{_output_idonly} = 0;
+ $self->{_output_brief} = 0;
+ $self->{_output_flatq} = 0;
+ $self->{_output_vars_only} = 1;
}
sub set_show_vars {
my $s = shift;
foreach my $v (split(/\s*,\s*/, $s)) {
- $self->{_show_vars}{$v}++;
+ push(@{$self->{_show_vars}}, $v);
}
}
$self->{_message} = '';
$self->{_path} = '';
$self->{_vars} = {};
+ $self->{_vars_raw} = {};
$self->{_numrecips} = 0;
$self->{_udel_tree} = {};
$self->_reset();
$self->{_message} = shift || return(0);
- return(0) if (!$self->{_spool_dir});
- if (!$self->_find_path()) {
+ $self->{_path} = shift; # optional path to message
+ return(0) if (!$self->{_input_path});
+ if (!$self->{_path} && !$self->_find_path()) {
# assume the message was delivered from under us and ignore
$self->{_delivered} = 1;
return(1);
return(1);
}
+# take the output of get_state() and set up a message internally like
+# parse_message (except from a saved data struct, not by parsing the
+# files on disk).
+sub restore_state {
+ my $self = shift;
+ my $h = shift;
+
+ return(1) if ($h->{_delivered});
+ $self->_reset();
+ $self->{_message} = $h->{_message} || return(0);
+ return(0) if (!$self->{_input_path});
+
+ $self->{_path} = $h->{_path};
+ $self->{_vars} = $h->{_vars};
+ $self->{_numrecips} = $h->{_numrecips};
+ $self->{_udel_tree} = $h->{_udel_tree};
+ $self->{_del_tree} = $h->{_del_tree};
+ $self->{_recips} = $h->{_recips};
+
+ $self->{_vars}{message_age} = time() - $self->{_vars}{received_time};
+ return(1);
+}
+
+# This returns the state data for a specific message in a format that can
+# be later frozen back in to regain state
+#
+# after calling this function, this specific state is not expect to be
+# reused. That's because we're returning direct references to specific
+# internal structures. We're also modifying the structure ourselves
+# by deleting certain internal message variables.
+sub get_state {
+ my $self = shift;
+ my $h = {}; # this is the hash ref we'll be returning.
+
+ $h->{_delivered} = $self->{_delivered};
+ $h->{_message} = $self->{_message};
+ $h->{_path} = $self->{_path};
+ $h->{_vars} = $self->{_vars};
+ $h->{_numrecips} = $self->{_numrecips};
+ $h->{_udel_tree} = $self->{_udel_tree};
+ $h->{_del_tree} = $self->{_del_tree};
+ $h->{_recips} = $self->{_recips};
+
+ # delete some internal variables that we will rebuild later if needed
+ delete($h->{_vars}{message_body});
+ delete($h->{_vars}{message_age});
+
+ return($h);
+}
+
+# keep this sub as a feature if we ever break this module out, but do away
+# with its use in exipick (pass it in from caller instead)
sub _find_path {
my $self = shift;
return(0) if (!$self->{_message});
- return(0) if (!$self->{_spool_dir});
+ return(0) if (!$self->{_input_path});
- foreach my $f ('', substr($self->{_message}, 5, 1).'/') {
- if (-f $self->{_spool_dir} . "/input/$f" . $self->{_message} . '-H') {
- $self->{_path} = $self->{_spool_dir} . "/input/$f";
+ # test split spool first on the theory that people concerned about
+ # performance will have split spool set =).
+ foreach my $f (substr($self->{_message}, 5, 1).'/', '') {
+ if (-f "$self->{_input_path}/$f$self->{_message}-H") {
+ $self->{_path} = "$self->{_input_path}}/$f";
return(1);
}
}
sub set_spool {
my $self = shift;
$self->{_spool_dir} = shift;
+ $self->{_input_path} = shift;
+ if ($self->{_input_path} !~ m|^/|) {
+ $self->{_input_path} = $self->{_spool_dir} . '/' . $self->{_input_path};
+ }
+}
+
+sub get_matching_vars {
+ my $self = shift;
+ my $e = shift;
+
+ if ($e =~ /^\^/) {
+ my @r = ();
+ foreach my $v (keys %{$self->{_vars}}) { push(@r, $v) if ($v =~ /$e/); }
+ return(@r);
+ } else {
+ return($e);
+ }
}
# accepts a variable with or without leading '$' or trailing ':'
sub get_var {
my $self = shift;
- my $var = shift;
+ my $var = lc(shift); $var =~ s/^\$//; $var =~ s/:$//;
+
+ if ($var eq 'message_body' && !defined($self->{_vars}{message_body})) {
+ $self->_parse_body()
+ } elsif ($var =~ s|^([rb]?h)(eader)?_|${1}eader_| &&
+ exists($self->{_vars}{$var}) && !defined($self->{_vars}{$var}))
+ {
+ if ((my $type = $1) eq 'rh') {
+ $self->{_vars}{$var} = join('', @{$self->{_vars_raw}{$var}{vals}});
+ } else {
+ # both bh_ and h_ build their strings from rh_. Do common work here
+ my $rh = $var; $rh =~ s|^b?|r|;
+ my $comma = 1 if ($self->{_vars_raw}{$rh}{type} =~ /^[BCFRST]$/);
+ foreach (@{$self->{_vars_raw}{$rh}{vals}}) {
+ my $x = $_; # editing $_ here would change the original, which is bad
+ $x =~ s|^\s+||;
+ $x =~ s|\s+$||;
+ if ($comma) { chomp($x); $self->{_vars}{$var} .= "$x,\n"; }
+ else { $self->{_vars}{$var} .= $x; }
+ }
+ $self->{_vars}{$var} =~ s|[\s\n]*$||;
+ $self->{_vars}{$var} =~ s|,$|| if ($comma);
+ # ok, that's the preprocessing, not do specific processing for h type
+ if ($type eq 'bh') {
+ $self->{_vars}{$var} = $self->_decode_2047($self->{_vars}{$var});
+ } else {
+ $self->{_vars}{$var} =
+ $self->_decode_2047($self->{_vars}{$var}, $charset);
+ }
+ }
+ }
+ elsif ($var eq 'received_count' && !defined($self->{_vars}{received_count}))
+ {
+ $self->{_vars}{received_count} =
+ scalar(@{$self->{_vars_raw}{rheader_received}{vals}});
+ }
+ elsif ($var eq 'message_headers' && !defined($self->{_vars}{message_headers}))
+ {
+ $self->{_vars}{$var} =
+ $self->_decode_2047($self->{_vars}{message_headers_raw}, $charset);
+ chomp($self->{_vars}{$var});
+ }
+ elsif ($var eq 'reply_address' && !defined($self->{_vars}{reply_address}))
+ {
+ $self->{_vars}{reply_address} = exists($self->{_vars}{"header_reply-to"})
+ ? $self->get_var("header_reply-to") : $self->get_var("header_from");
+ }
- $var =~ s/^\$//;
- $var =~ s/:$//;
+ #chomp($self->{_vars}{$var}); # I think this was only for headers, obsolete
+ return $self->{_vars}{$var};
+}
- $self->_parse_body()
- if ($var eq 'message_body' && !$self->{_vars}{message_body});
+sub _decode_2047 {
+ my $self = shift;
+ my $s = shift; # string to decode
+ my $c = shift; # target charset. If empty, just decode, don't convert
+ my $t = ''; # the translated string
+ my $e = 0; # set to true if we get an error in here anywhere
+
+ return($s) if ($s !~ /=\?/); # don't even bother to look if there's no sign
+
+ my @p = ();
+ foreach my $mw (split(/(=\?[^\?]{3,}\?[BQ]\?[^\?]{1,74}\?=)/i, $s)) {
+ next if ($mw eq '');
+ if ($mw =~ /=\?([^\?]{3,})\?([BQ])\?([^\?]{1,74})\?=/i) {
+ push(@p, { data => $3, encoding => uc($2), charset => uc($1),
+ is_mime => 1 });
+ if ($p[-1]{encoding} eq 'Q') {
+ my @ow = split('', $p[-1]{data});
+ my @nw = ();
+ for (my $i = 0; $i < @ow; $i++) {
+ if ($ow[$i] eq '_') { push(@nw, ' '); }
+ elsif ($ow[$i] eq '=') {
+ if (scalar(@ow) - ($i+1) < 2) { # ran out of characters
+ $e = 1; last;
+ } elsif ($ow[$i+1] !~ /[\dA-F]/i || $ow[$i+2] !~ /[\dA-F]/i) {
+ $e = 1; last;
+ } else {
+ #push(@nw, chr('0x'.$ow[$i+1].$ow[$i+2]));
+ push(@nw, pack("C", hex($ow[$i+1].$ow[$i+2])));
+ $i += 2;
+ }
+ }
+ elsif ($ow[$i] =~ /\s/) { # whitespace is illegal
+ $e = 1;
+ last;
+ }
+ else { push(@nw, $ow[$i]); }
+ }
+ $p[-1]{data} = join('', @nw);
+ } elsif ($p[-1]{encoding} eq 'B') {
+ my $x = $p[-1]{data};
+ $x =~ tr#A-Za-z0-9+/##cd;
+ $x =~ s|=+$||;
+ $x =~ tr#A-Za-z0-9+/# -_#;
+ my $r = '';
+ while ($x =~ s/(.{1,60})//s) {
+ $r .= unpack("u", chr(32 + int(length($1)*3/4)) . $1);
+ }
+ $p[-1]{data} = $r;
+ }
+ } else {
+ push(@p, { data => $mw, is_mime => 0,
+ is_ws => ($mw =~ m|^[\s\n]+|sm) ? 1 : 0 });
+ }
+ }
- return $self->{_vars}{$var};
+ for (my $i = 0; $i < @p; $i++) {
+ # mark entities we want to skip (whitespace between consecutive mimewords)
+ if ($p[$i]{is_mime} && $p[$i+1]{is_ws} && $p[$i+2]{is_mime}) {
+ $p[$i+1]{skip} = 1;
+ }
+
+ # if word is a mimeword and we have access to Encode and charset was
+ # specified, try to convert text
+ # XXX _cannot_ get consistent conversion results in perl, can't get them
+ # to return same conversions that exim performs. Until I can figure this
+ # out, don't attempt any conversions (header_ will return same value as
+ # bheader_).
+ #if ($c && $p[$i]{is_mime} && $self->_try_load('Encode')) {
+ # # XXX not sure how to catch errors here
+ # Encode::from_to($p[$i]{data}, $p[$i]{charset}, $c);
+ #}
+
+ # replace binary zeros w/ '?' in decoded text
+ if ($p[$i]{is_mime}) { $p[$i]{data} =~ s|\x00|?|g; }
+ }
+
+ if ($e) {
+ return($s);
+ } else {
+ return(join('', map { $_->{data} } grep { !$_->{skip} } @p));
+ }
+}
+
+# This isn't a class func but I'm tired
+sub _try_load {
+ my $self = shift;
+ my $mod = shift;
+
+ eval("use $mod");
+ return $@ ? 0 : 1;
}
sub _parse_body {
my $self = shift;
my $f = $self->{_path} . '/' . $self->{_message} . '-D';
+ $self->{_vars}{message_body} = ""; # define var so we only come here once
open(I, "<$f") || return($self->_error("Couldn't open $f: $!"));
chomp($_ = <I>);
sub _parse_header {
my $self = shift;
my $f = $self->{_path} . '/' . $self->{_message} . '-H';
+ $self->{_vars}{header_path} = $f;
+ $self->{_vars}{data_path} = $self->{_path} . '/' . $self->{_message} . '-D';
+
+ if (!open(I, "<$f")) {
+ # assume message went away and silently ignore
+ $self->{_delivered} = 1;
+ return(1);
+ }
+
+ # There are a few numeric variables that should explicitly be set to
+ # zero if they aren't found in the header. Technically an empty value
+ # works just as well, but might as well be pedantic
+ $self->{_vars}{body_zerocount} = 0;
+ $self->{_vars}{host_lookup_deferred} = 0;
+ $self->{_vars}{host_lookup_failed} = 0;
+ $self->{_vars}{tls_certificate_verified} = 0;
- open(I, "<$f") || return($self->_error("Couldn't open $f: $!"));
chomp($_ = <I>);
return(0) if ($self->{_message}.'-H' ne $_);
$self->{_vars}{message_id} = $self->{_message};
+ $self->{_vars}{message_exim_id} = $self->{_message};
# line 2
chomp($_ = <I>);
- return(0) if (!/^(\S+)\s(\d+)\s(\d+)$/);
+ return(0) if (!/^(.+)\s(\-?\d+)\s(\-?\d+)$/);
$self->{_vars}{originator_login} = $1;
$self->{_vars}{originator_uid} = $2;
$self->{_vars}{originator_gid} = $3;
if ($tag eq '-acl') {
my $t;
return(0) if ($arg !~ /^(\d+)\s(\d+)$/);
- if ($1 < $Exim::SpoolFile::ACL_C_MAX) {
+ if ($1 < $Exim::SpoolFile::ACL_C_MAX_LEGACY) {
$t = "acl_c$1";
} else {
- $t = "acl_m" . ($1 - $Exim::SpoolFile::ACL_C_MAX);
+ $t = "acl_m" . ($1 - $Exim::SpoolFile::ACL_C_MAX_LEGACY);
}
read(I, $self->{_vars}{$t}, $2+1) || return(0);
chomp($self->{_vars}{$t});
+ } elsif ($tag eq '-aclc') {
+ #return(0) if ($arg !~ /^(\d+)\s(\d+)$/);
+ return(0) if ($arg !~ /^(\S+)\s(\d+)$/);
+ my $t = "acl_c$1";
+ read(I, $self->{_vars}{$t}, $2+1) || return(0);
+ chomp($self->{_vars}{$t});
+ } elsif ($tag eq '-aclm') {
+ #return(0) if ($arg !~ /^(\d+)\s(\d+)$/);
+ return(0) if ($arg !~ /^(\S+)\s(\d+)$/);
+ my $t = "acl_m$1";
+ read(I, $self->{_vars}{$t}, $2+1) || return(0);
+ chomp($self->{_vars}{$t});
} elsif ($tag eq '-local') {
$self->{_vars}{sender_local} = 1;
} elsif ($tag eq '-localerror') {
$self->{_vars}{local_error_message} = 1;
} elsif ($tag eq '-local_scan') {
$self->{_vars}{local_scan_data} = $arg;
+ } elsif ($tag eq '-spam_score_int') {
+ $self->{_vars}{spam_score_int} = $arg;
+ $self->{_vars}{spam_score} = $arg / 10;
+ } elsif ($tag eq '-bmi_verdicts') {
+ $self->{_vars}{bmi_verdicts} = $arg;
+ } elsif ($tag eq '-host_lookup_deferred') {
+ $self->{_vars}{host_lookup_deferred} = 1;
} elsif ($tag eq '-host_lookup_failed') {
$self->{_vars}{host_lookup_failed} = 1;
} elsif ($tag eq '-body_linecount') {
$self->{_vars}{body_linecount} = $arg;
+ } elsif ($tag eq '-max_received_linelength') {
+ $self->{_vars}{max_received_linelength} = $arg;
+ } elsif ($tag eq '-body_zerocount') {
+ $self->{_vars}{body_zerocount} = $arg;
} elsif ($tag eq '-frozen') {
$self->{_vars}{deliver_freeze} = 1;
$self->{_vars}{deliver_frozen_at} = $arg;
+ } elsif ($tag eq '-allow_unqualified_recipient') {
+ $self->{_vars}{allow_unqualified_recipient} = 1;
+ } elsif ($tag eq '-allow_unqualified_sender') {
+ $self->{_vars}{allow_unqualified_sender} = 1;
} elsif ($tag eq '-deliver_firsttime') {
$self->{_vars}{deliver_firsttime} = 1;
$self->{_vars}{first_delivery} = 1;
$self->{_vars}{tls_cipher} = $arg;
} elsif ($tag eq '-tls_peerdn') {
$self->{_vars}{tls_peerdn} = $arg;
+ } elsif ($tag eq '-tls_sni') {
+ $self->{_vars}{tls_sni} = $arg;
} elsif ($tag eq '-host_address') {
$self->{_vars}{sender_host_port} = $self->_get_host_and_port(\$arg);
$self->{_vars}{sender_host_address} = $arg;
} elsif ($tag eq '-interface_address') {
- $self->{_vars}{interface_port} = $self->_get_host_and_port(\$arg);
- $self->{_vars}{interface_address} = $arg;
+ $self->{_vars}{received_port} =
+ $self->{_vars}{interface_port} = $self->_get_host_and_port(\$arg);
+ $self->{_vars}{received_ip_address} =
+ $self->{_vars}{interface_address} = $arg;
+ } elsif ($tag eq '-active_hostname') {
+ $self->{_vars}{smtp_active_hostname} = $arg;
} elsif ($tag eq '-host_auth') {
$self->{_vars}{sender_host_authenticated} = $arg;
} elsif ($tag eq '-host_name') {
$self->{_vars}{received_protocol} = $arg;
} elsif ($tag eq '-N') {
$self->{_vars}{dont_deliver} = 1;
- } elsif ($tag eq '-body_zerocount') {
- $self->{_vars}{body_zerocount} = $arg;
- } elsif ($tag eq '-allow_unqualified_recipient') {
- $self->{_vars}{allow_unqualified_recipient} = 1;
- } elsif ($tag eq '-allow_unqualified_sender') {
- $self->{_vars}{allow_unqualified_sender} = 1;
} else {
# unrecognized tag, save it for reference
$self->{$tag} = $arg;
return($self->_error("incorrect format: $_")) if (length($2) != $3);
$self->{_recips}{$1} = { pno => $4, errors_to => $2 };
$addr = $1;
+ } elsif (/^(\S*)\s(\S*)\s(\d+),(\d+)\s(\S*)\s(\d+),(-?\d+)#3$/) {
+ #print STDERR "exim4 new type #3 DSN (untested): $_\n";
+ return($self->_error("incorrect format: $_"))
+ if ((length($2) != $3) || (length($5) != $6));
+ $self->{_recips}{$1} = { pno => $7, errors_to => $5 };
+ $addr = $1;
} elsif (/^.*#(\d+)$/) {
- print STDERR "exim4 #$1 style (unimplemented): $_\n";
+ #print STDERR "exim4 #$1 style (unimplemented): $_\n";
$self->_error("exim4 #$1 style (unimplemented): $_");
} else {
#print STDERR "default type: $_\n";
}
$self->{_udel_tree}{$addr} = 1 if (!$self->{_del_tree}{$addr});
}
- $self->{_vars}{recipients} = join(', ', keys(%{$self->{_recips}}));
- $self->{_vars}{recipients_del} = join(', ', keys(%{$self->{_del_tree}}));
- $self->{_vars}{recipients_undel} = join(', ', keys(%{$self->{_udel_tree}}));
+ $self->{_vars}{recipients} = join(', ', keys(%{$self->{_recips}}));
+ $self->{_vars}{recipients_del} = join(', ', keys(%{$self->{_del_tree}}));
+ $self->{_vars}{recipients_undel} = join(', ', keys(%{$self->{_udel_tree}}));
+ $self->{_vars}{recipients_undel_count} = scalar(keys(%{$self->{_udel_tree}}));
+ $self->{_vars}{recipients_del_count} = 0;
+ foreach my $r (keys %{$self->{_del_tree}}) {
+ next if (!$self->{_recips}{$r});
+ $self->{_vars}{recipients_del_count}++;
+ }
# blank line
$_ = <I>;
$_ .= $t;
$t = getc(I);
}
- # ok, right here $t contains the header flag and $_ contains the number of
- # bytes to read. If we ever use the header flag, grab it here.
- $self->{_vars}{message_size} += $_ if ($t ne '*');
- $t = getc(I); # strip the space out of the file
- my $bytes = $_;
- return(0) if (read(I, $_, $bytes) != $bytes);
- chomp(); # may regret this later
- # build the $header_ variable, following exim's rules (sort of)
- if (/^([^ :]+):(.*)$/s) {
- my $v = "header_" . lc($1);
- my $d = $2;
- $d =~ s/^\s*//;
- $d =~ s/\s*$//;
- $self->{_vars}{$v} .= (defined($self->{_vars}{$v}) ? "\n" : '') . $d;
- $self->{_vars}{received_count}++ if ($v eq 'header_received');
+ my $hdr_flag = $t;
+ my $hdr_bytes = $_;
+ $t = getc(I); # strip the space out of the file
+ return(0) if (read(I, $_, $hdr_bytes) != $hdr_bytes);
+ if ($hdr_flag ne '*') {
+ $self->{_vars}{message_linecount} += (tr/\n//);
+ $self->{_vars}{message_size} += $hdr_bytes;
}
- # push header onto $message_headers var, following exim's rules
- $self->{_vars}{message_headers} .=
- (defined($self->{_vars}{message_headers}) ? "\n" : '') . $_;
- }
- close(I);
- if (length($self->{_vars}{"header_reply-to"}) > 0) {
- $self->{_vars}{reply_address} = $self->{_vars}{"header_reply-to"};
- } else {
- $self->{_vars}{reply_address} = $self->{_vars}{header_from};
+ # mark (rb)?header_ vars as existing and store raw value. They'll be
+ # processed further in get_var() if needed
+ my($v,$d) = split(/:/, $_, 2);
+ $v = "header_" . lc($v);
+ $self->{_vars}{$v} = $self->{_vars}{"b$v"} = $self->{_vars}{"r$v"} = undef;
+ push(@{$self->{_vars_raw}{"r$v"}{vals}}, $d);
+ $self->{_vars_raw}{"r$v"}{type} = $hdr_flag;
+ $self->{_vars}{message_headers_raw} .= $_;
}
+ close(I);
$self->{_vars}{message_body_size} =
(stat($self->{_path}.'/'.$self->{_message}.'-D'))[7] - 19;
if ($self->{_vars}{message_body_size} < 0) {
$self->{_vars}{message_size} = 0;
+ $self->{_vars}{message_body_missing} = 1;
} else {
$self->{_vars}{message_size} += $self->{_vars}{message_body_size} + 1;
}
+ $self->{_vars}{message_linecount} += $self->{_vars}{body_linecount};
+
+ my $i = $self->{_vars}{message_size};
+ if ($i == 0) { $i = ""; }
+ elsif ($i < 1024) { $i = sprintf("%d", $i); }
+ elsif ($i < 10240) { $i = sprintf("%.1fK", $i / 1024); }
+ elsif ($i < 1048576) { $i = sprintf("%dK", ($i+512)/1024); }
+ elsif ($i < 10485760) { $i = sprintf("%.1fM", $i/1048576); }
+ else { $i = sprintf("%dM", ($i + 524288)/1048576); }
+ $self->{_vars}{shown_message_size} = $i;
+
return(1);
}
return(0);
}
-sub print_message {
+# honoring all formatting preferences, return a scalar variable of the
+# information for the single message matching what exim -bp would show.
+# We can print later if we want.
+sub format_message {
my $self = shift;
- my $fh = shift || \*STDOUT;
+ my $o = '';
return if ($self->{_delivered});
+ # define any vars we want to print out for this message. The requests
+ # can be regexps, and the defined vars can change for each message, so we
+ # have to build this list for each message
+ my @vars = ();
+ if (@{$self->{_show_vars}}) {
+ my %t = ();
+ foreach my $e (@{$self->{_show_vars}}) {
+ foreach my $v ($self->get_matching_vars($e)) {
+ next if ($t{$v}); $t{$v}++; push(@vars, $v);
+ }
+ }
+ }
+
if ($self->{_output_idonly}) {
- print $fh $self->{_message}, "\n";
- return;
+ $o .= $self->{_message};
+ foreach my $v (@vars) { $o .= " $v='" . $self->get_var($v) . "'"; }
+ $o .= "\n";
+ return $o;
+ } elsif ($self->{_output_vars_only}) {
+ foreach my $v (@vars) { $o .= $self->get_var($v) . "\n"; }
+ return $o;
}
if ($self->{_output_long} || $self->{_output_flatq}) {
my $i = int($self->{_vars}{message_age} / 60);
if ($i > 90) {
$i = int(($i+30)/60);
- if ($i > 72) { printf $fh "%2dd ", int(($i+12)/24); }
- else { printf $fh "%2dh ", $i; }
- } else { printf $fh "%2dm ", $i; }
-
- $i = $self->{_vars}{message_size};
- if ($i == 0) { $i = " "; }
- elsif ($i < 1024) { $i = sprintf("%5d", $i); }
- elsif ($i < 10*1024) { $i = sprintf("%4.1fK", $i / 1024); }
- elsif ($i < 1024*1024) { $i = sprintf("%4dK", ($i+512)/1024); }
- elsif ($i < 10*1024*1024) { $i = sprintf("%4.1fM", $i/(1024*1024)); }
- else { $i = sprintf("%4dM", ($i + 512 * 1024)/(1024*1024)); }
- print $fh "$i ";
+ if ($i > 72) { $o .= sprintf "%2dd ", int(($i+12)/24); }
+ else { $o .= sprintf "%2dh ", $i; }
+ } else { $o .= sprintf "%2dm ", $i; }
+
+ if ($self->{_output_flatq} && @vars) {
+ $o .= join(';', map { "$_='".$self->get_var($_)."'" } (@vars)
+ );
+ } else {
+ $o .= sprintf "%5s", $self->{_vars}{shown_message_size};
+ }
+ $o .= " ";
}
- print $fh "$self->{_message} ";
- print $fh "From: " if ($self->{_output_brief});
- print $fh "<$self->{_vars}{sender_address}>";
+ $o .= "$self->{_message} ";
+ $o .= "From: " if ($self->{_output_brief});
+ $o .= "<$self->{_vars}{sender_address}>";
if ($self->{_output_long}) {
- print $fh " ($self->{_vars}{originator_login})"
+ $o .= " ($self->{_vars}{originator_login})"
if ($self->{_vars}{sender_set_untrusted});
# XXX exim contains code here to print spool format errors
- print $fh " *** frozen ***" if ($self->{_vars}{deliver_freeze});
- print $fh "\n";
+ $o .= " *** frozen ***" if ($self->{_vars}{deliver_freeze});
+ $o .= "\n";
- foreach my $v (keys(%{$self->{_show_vars}})) {
- printf $fh " %25s = '%s'\n", $v, $self->get_var($v);
+ foreach my $v (@vars) {
+ $o .= sprintf " %25s = '%s'\n", $v, $self->get_var($v);
}
foreach my $r (keys %{$self->{_recips}}) {
next if ($self->{_del_tree}{$r} && $self->{_undelivered_only});
- printf $fh " %s %s\n", $self->{_del_tree}{$r} ? "D" : " ", $r;
+ $o .= sprintf " %s %s\n", $self->{_del_tree}{$r} ? "D" : " ", $r;
}
if ($self->{_show_generated}) {
foreach my $r (keys %{$self->{_del_tree}}) {
next if ($self->{_recips}{$r});
- printf $fh " +D %s\n", $r;
+ $o .= sprintf " +D %s\n", $r;
}
}
} elsif ($self->{_output_brief}) {
next if ($self->{_del_tree}{$r});
push(@r, $r);
}
- print $fh " To: ", join(';', @r);
+ $o .= " To: " . join(';', @r);
+ if (scalar(@vars)) {
+ $o .= " Vars: ".join(';',map { "$_='".$self->get_var($_)."'" } (@vars));
+ }
} elsif ($self->{_output_flatq}) {
- print $fh " *** frozen ***" if ($self->{_vars}{deliver_freeze});
+ $o .= " *** frozen ***" if ($self->{_vars}{deliver_freeze});
my @r = ();
foreach my $r (keys %{$self->{_recips}}) {
next if ($self->{_del_tree}{$r});
push(@r, $r);
}
- print $fh " ", join(' ', @r);
+ $o .= " " . join(' ', @r);
}
- print $fh "\n";
+ $o .= "\n";
+ return($o);
+}
+
+sub print_message {
+ my $self = shift;
+ my $fh = shift || \*STDOUT;
+ return if ($self->{_delivered});
+
+ print $fh $self->format_message();
}
sub dump {
=head1 NAME
-exipick - display messages from Exim queue based on a variety of criteria
+exipick - selectively display messages from an Exim queue
-=head1 USAGE
+=head1 SYNOPSIS
-exipick [--help|--version] | [-spool <spool>] [-and|-or] [-bp|-bpa|-bpc|-bpr|-bpra|-bpru|-bpu] [<criterion> [<criterion> ...]]
+exipick [<options>] [<criterion> [<criterion> ...]]
=head1 DESCRIPTION
-exipick is designed to display the contents of a Exim mail spool based on user-specified criteria. It is designed to mimic the output of 'exim -bp' (or any of the other -bp* options) and Exim's spec.txt should be used to learn more about the exact format of the output. The criteria are formed by creating comparisons against characteristics of the messages, for instance message_size, sender_helo_name, or message_headers.
+exipick is a tool to display messages in an Exim queue. It is very similar to exiqgrep and is, in fact, a drop in replacement for exiqgrep. exipick allows you to select messages to be displayed using any piece of data stored in an Exim spool file. Matching messages can be displayed in a variety of formats.
+
+=head1 QUICK START
+
+Delete every frozen message from queue:
+ exipick -zi | xargs exim -Mrm
+
+Show only messages which have not yet been virus scanned:
+ exipick '$received_protocol ne virus-scanned'
+
+Run the queue in a semi-random order:
+ exipick -i --random | xargs exim -M
+
+Show the count and total size of all messages which either originated from localhost or have a received protocol of 'local':
+ exipick --or --size --bpc \
+ '$sender_host_address eq 127.0.0.1' \
+ '$received_protocol eq local'
+
+Display all messages received on the MSA port, ordered first by the sender's email domain and then by the size of the emails:
+ exipick --sort sender_address_domain,message_size \
+ '$received_port == 587'
+
+Display only messages whose every recipient is in the example.com domain, also listing the IP address of the sending host:
+ exipick --show-vars sender_host_address \
+ '$each_recipients = example.com'
+
+Same as above, but show values for all defined variables starting with sender_ and the number of recipients:
+ exipick --show-vars ^sender_,recipients_count \
+ '$each_recipients = example.com'
=head1 OPTIONS
=over 4
-=item -spool
+=item --and
+
+Display messages matching all criteria (default)
-The path to exim's spool directory. In general usage you should set the $spool variable in the script to your site's main spool directory, but this option is useful for alternate installs, or installs on NFS servers, etc.
+=item -b
-=item -and
+Display messages in brief format (exiqgrep)
-A message will be displayed only if it matches all of the specified criteria. This is the default.
+=item -bp
-=item -or
+Display messages in standard mailq format (default)
-A message will be displayed if it matches any of the specified criteria.
+=item -bpa
-=item The -bp* options all control how much information is displayed and in what manner. They all match the functionality of the options of the same name in Exim. Briefly:
+Same as -bp, show generated addresses also (exim)
-=item -bp display the matching messages in 'mailq' format.
+=item -bpc
-=item -bpa ... with generated addresses as well.
+Show a count of matching messages (exim)
-=item -bpc ... just show a count of messages.
+=item -bpr
-=item -bpr ... do not sort.
+Same as '-bp --unsorted' (exim)
-=item -bpra ... with generated addresses, unsorted.
+=item -bpra
-=item -bpru ... only undelivered addresses, unsorted.
+Same as '-bpa --unsorted' (exim)
-=item -bpu ... only undelivered addresses.
+=item -bpru
-Please see Exim's spec.txt for details on the format and information displayed with each option.
+Same as '-bpu --unsorted' (exim)
-=item The following options are included for compatibility with the 'exiqgrep' utility:
+=item -bpu
-=item -f <regexp> Same as '$sender_address = <regexp>'
+Same as -bp, but only show undelivered messages (exim)
-=item -r <regexp> Same as '$recipients = <regexp>'
+=item -C | --config <config>
-=item -y <seconds> Same as '$message_age < <seconds>'
+Use <config> to determine the proper spool directory. (See C<--spool>
+or C<--input> for alternative ways to specify the directories to operate on.)
-=item -o <seconds> Same as '$message_age > <seconds>'
+=item -c
-=item -z Same as '$deliver_freeze'
+Show a count of matching messages (exiqgrep)
-=item -x Same as '!$deliver_freeze'
+=item --caseful
-=item -c Display count of matches only
+Make operators involving '=' honor case
-=item -l Display in long format (default)
+=item --charset
-=item -i Display message IDs only
+Override the default local character set for $header_ decoding
-=item -b Display brief format only
+=item -f <regexp>
-Please see the 'exiqgrep' documentation for more details on the behaviour and output format produced by these options
+Same as '$sender_address =~ /<regexp>/' (exiqgrep). Note that this preserves the default case sensitivity of exiqgrep's interface.
-=item <criterion>
+=item --finput
-The criteria are used to determine whether or not a given message should be displayed. The criteria are built using variables containing information about the individual messages (see VARIABLES section for list and descriptions of available variables). Each criterion is evaluated for each message in the spool and if all (by default) criteria match or (if -or option is specified) any criterion matches, the message is displayed. See VARIABLE TYPES for explanation of types of variables and the evaluations that can be performed on them and EXAMPLES section for complete examples.
+Same as '--input-dir Finput'. 'Finput' is where exim copies frozen messages when compiled with SUPPORT_MOVE_FROZEN_MESSAGES.
-The format of a criterion is explained in detail below, but a key point to make is that the variable being compared must always be on the left side of the comparison.
+=item --flatq
-If no criteria are provided all messages in the queue are displayed (in this case the output of exipick should be identical to the output of 'exim -bp')
+Use a single-line output format
+
+=item --freeze <cache file>
+
+Save queue information in an quickly retrievable format
=item --help
-This screen.
+Display this output
+
+=item -i
+
+Display only the message IDs (exiqgrep)
+
+=item --input-dir <inputname>
+
+Set the name of the directory under the spool directory. By default this is "input". If this starts with '/', the value of --spool is ignored. See also --finput.
+
+=item -l
+
+Same as -bp (exiqgrep)
+
+=item --not
+
+Negate all tests.
+
+=item -o <seconds>
+
+Same as '$message_age > <seconds>' (exiqgrep)
+
+=item --or
+
+Display messages matching any criteria
+
+=item --queue <name>
+
+Name of the queue (default: ''). See "named queues" in the spec.
+
+=item -R
+
+Same as --reverse (exiqgrep)
+
+=item -r <regexp>
+
+Same as '$recipients =~ /<regexp>/' (exiqgrep). Note that this preserves the default case sensitivity of exiqgrep's interface.
+
+=item --random
+
+Display messages in random order
+
+=item --reverse
+
+Display messages in reverse order
+
+=item -s <string>
+
+Same as '$shown_message_size eq <string>' (exiqgrep)
+
+=item --spool <path>
+
+Set the path to the exim spool to use. This value will have the argument to --input or 'input' appended, or be ignored if --input is a full path. If not specified, exipick uses the value from C<exim [-C config] -n -bP spool_directory>, and if this call fails, the F</opt/exim/spool> from build time (F<Local/Makefile>) is used. See also --config.
+
+=item --show-rules
+
+Show the internal representation of each criterion specified
+
+=item --show-tests
+
+Show the result of each criterion on each message
+
+=item --show-vars <variable>[,<variable>...]
+
+Show the value for <variable> for each displayed message. <variable> will be a regular expression if it begins with a circumflex.
+
+=item --size
+
+Show the total bytes used by each displayed message
+
+=item --thaw <cache file>
+
+Read queue information cached from a previous --freeze run
+
+=item --sort <variable>[,<variable>...]
+
+Display matching messages sorted according to <variable>
+
+=item --unsorted
+
+Do not apply any sorting to output
=item --version
-Version info.
+Display the version of this command
+
+=item -x
+
+Same as '!$deliver_freeze' (exiqgrep)
+
+=item -y
+
+Same as '$message_age < <seconds>' (exiqgrep)
+
+=item -z
+
+Same as '$deliver_freeze' (exiqgrep)
=back
-=head1 VARIABLE TYPES
+=head1 CRITERIA
-Although there are variable types defined, they are defined only by the type of data that gets put into them. They are internally typeless. Because of this it is perfectly legal to perform a numeric comparison against a string variable, although the results will probably be meaningless.
+Exipick decides which messages to display by applying a test against each message. The rules take the general form of 'VARIABLE OPERATOR VALUE'. For example, '$message_age > 60'. When exipick is deciding which messages to display, it checks the $message_age variable for each message. If a message's age is greater than 60, the message will be displayed. If the message's age is 60 or less seconds, it will not be displayed.
-=over 4
+Multiple criteria can be used. The order they are specified does not matter. By default all criteria must evaluate to true for a message to be displayed. If the --or option is used, a message is displayed as long as any of the criteria evaluate to true.
-=item NUMERIC
+See the VARIABLES and OPERATORS sections below for more details
-Variable of the numeric type can be of integer or float. Valid comparisons are <, <=, >, >=, ==, and !=.
+=head1 OPERATORS
-The numbers specified in the criteria can have a suffix of d, h, m, s, M, K, or B, in which case the number will be mulitplied by 86400, 3600, 60, 1, 1048576, 1024, or 1 respectively. These suffixes are case sensitive. While these are obviously designed to aid in date and size calculations, they are not restricted to variables of their respective types.
+=over 4
=item BOOLEAN
-Variables of the boolean type are very easy to use in criteria. The format is either the variable by itself or the variable negated with a ! sign. For instance, 'deliver_freeze' matches if the message in question is frozen, '!deliver_freeze' matches if message is not frozen.
+Boolean variables are checked simply by being true or false. There is no real operator except negation. Examples of valid boolean tests:
+ '$deliver_freeze'
+ '!$deliver_freeze'
-=item STRING
+=item NUMERIC
-String variables are basically defined as those that are neither numeric nor boolean and can contain any data. There are several types of comparisons that can be made against string variables. With the exception of '=', the operators all match the functionality of the like-named perl operators.
+Valid comparisons are <, <=, >, >=, ==, and !=. Numbers can be integers or floats. Any number in a test suffixed with d, h, m, s, M, K, or B will be multiplied by 86400, 3600, 60, 1, 1048576, 1024, or 1 respectively. Examples of valid numeric tests:
+ '$message_age >= 3d'
+ '$local_interface == 587'
+ '$message_size < 30K'
+
+=item STRING
-The simplest form is a bare string regular expression, represented by the operator '='. The value used for the comparison will be evaluated as a regular expression and can be as simple or as complex as desired. For instance 'sender_helo_name = example' on the simple end or 'sender_helo_name = ^aol\.com$' on the more complex end.
+The string operators are =, eq, ne, =~, and !~. With the exception of '=', the operators all match the functionality of the like-named perl operators. eq and ne match a string exactly. !~, =~, and = apply a perl regular expression to a string. The '=' operator behaves just like =~ but you are not required to place // around the regular expression. Examples of valid string tests:
+ '$received_protocol eq esmtp'
+ '$sender_address = example.com'
+ '$each_recipients =~ /^a[a-z]{2,3}@example.com$/'
-Slightly more complex is the string comparison with the operators 'eq' and 'ne' for equal and not equal, respectively. 'sender_helo_name eq hotmail.com' is true for messages with the exact helo string "hotmail.com", while 'sender_helo_name ne hotmail.com' is true for any message any helo string other than hotmail.com.
+=item NEGATION
-The most complex and the most flexible format are straight regular expressions with the operators =~ and !~. The value in the criteria is expected to be a correctly formatted perl regular expression B<including the regexp delimiters (usually //)>. The criterion 'sender_helo_name !~ /^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$/' matches for any message which does not have an IP address for its helo string.
+There are many ways to negate tests, each having a reason for existing. Many tests can be negated using native operators. For instance, >1 is the opposite of <=1 and eq and ne are opposites. In addition, each individual test can be negated by adding a ! at the beginning of the test. For instance, '!$acl_m1 =~ /^DENY$/' is the same as '$acl_m1 !~ /^DENY$/'. Finally, every test can be specified by using the command line argument --not. This is functionally equivalent to adding a ! to the beginning of every test.
=back
=head1 VARIABLES
-With a few exceptions the available variables match Exim's internal expansion variables in both name and exact contents. There are a few notable additions and format deviations which are noted below. Although a brief explanation is offered below, Exim's spec.txt should be consulted for full details. It is important to remember that not every variable will be defined for every message. For example, sender_host_port is not defined for messages not received from a remote host.
+With a few exceptions the available variables match Exim's internal expansion variables in both name and exact contents. There are a few notable additions and format deviations which are noted below. Although a brief explanation is offered below, Exim's spec.txt should be consulted for full details. It is important to remember that not every variable will be defined for every message. For example, $sender_host_port is not defined for messages not received from a remote host.
-In the list below, '.' denotes standard messages with contents matching Exim's variable, '#' denotes standard variables with non-standard contents, and '+' denotes a non-standard variable.
+Internally, all variables are represented as strings, meaning any operator will work on any variable. This means that '$sender_host_name > 4' is a legal criterion, even if it does not produce meaningful results. Variables in the list below are marked with a 'type' to help in choosing which types of operators make sense to use.
-=head2 Boolean variables
+ Identifiers
+ B - Boolean variables
+ S - String variables
+ N - Numeric variables
+ . - Standard variable matching Exim's content definition
+ # - Standard variable, contents differ from Exim's definition
+ + - Non-standard variable
=over 4
-=item + allow_unqualified_recipient
+=item S . $acl_c0-$acl_c9, $acl_m0-$acl_m9
+
+User definable variables.
+
+=item B + $allow_unqualified_recipient
TRUE if unqualified recipient addresses are permitted in header lines.
-=item + allow_unqualified_sender
+=item B + $allow_unqualified_sender
TRUE if unqualified sender addresses are permitted in header lines.
-=item + deliver_freeze
+=item S . $authenticated_id
-TRUE if the message is frozen.
+Optional saved information from authenticators, or the login name of the calling process for locally submitted messages.
-=item . first_delivery
+=item S . $authenticated_sender
-TRUE if the message has not been deferred.
+The value of AUTH= param for smtp messages, or a generated value from the calling processes login and qualify domain for locally submitted messages.
-=item . manually_thawed
+=item S . $bheader_*, $bh_*
-TRUE when the message has been manually thawed.
+Value of the header(s) with the same name with any RFC2047 words decoded if present. See section 11.5 of Exim's spec.txt for full details.
-=item + dont_deliver
+=item S + $bmi_verdicts
-TRUE if, under normal circumstances, Exim will not try to deliver the message.
+The verdict string provided by a Brightmail content scan
-=item . host_lookup_failed
+=item N . $body_linecount
-TRUE if there was an attempt to look up the host's name from its IP address, but the attempt failed.
+The number of lines in the message's body.
-=item + local_error_message
+=item N . $body_zerocount
-TRUE if the message is a locally-generated error message.
+The number of binary zero bytes in the message's body.
-=item + sender_local
+=item S + $data_path
-TRUE if the message was locally generated.
+The path to the body file's location in the filesystem.
-=item + sender_set_untrusted
+=item B + $deliver_freeze
-TRUE if the envelope sender of this message was set by an untrusted local caller.
+TRUE if the message is currently frozen.
-=item . tls_certificate_verified
+=item N + $deliver_frozen_at
-TRUE if a TLS certificate was verified when the message was received.
+The epoch time at which message was frozen.
-=back
+=item B + $dont_deliver
-=head2 Numeric variables
+TRUE if, under normal circumstances, Exim will not try to deliver the message.
-=over 4
+=item S + $each_recipients
-=item . body_linecount
+This is a pseudo variable which allows you to apply a test against each address in $recipients individually. Whereas '$recipients =~ /@aol.com/' will match if any recipient address contains aol.com, '$each_recipients =~ /@aol.com$/' will only be true if every recipient matches that pattern. Note that this obeys --and or --or being set. Using it with --or is very similar to just matching against $recipients, but with the added benefit of being able to use anchors at the beginning and end of each recipient address.
-The number of lines in the message's body.
+=item S + $each_recipients_del
-=item . body_zerocount
+Like $each_recipients, but for $recipients_del
-The number of binary zero bytes in the message's body.
+=item S + $each_recipients_undel
-=item + deliver_frozen_at
+Like $each_recipients, but for $recipients_undel
-The epoch time at which message was frozen.
+=item B . $first_delivery
-=item . interface_port
+TRUE if the message has never been deferred.
-The local port number if network-originated messages.
+=item S . $header_*, $h_*
-=item . message_age
+This will always match the contents of the corresponding $bheader_* variable currently (the same behaviour Exim displays when iconv is not installed).
-The number of seconds since the message was received.
+=item S + $header_path
-=item . message_body_size
+The path to the header file's location in the filesystem.
-The size of the body in bytes.
+=item B . $host_lookup_deferred
-=item . message_size
+TRUE if there was an attempt to look up the host's name from its IP address, but an error occurred that during the attempt.
-The size of the message in bytes.
+=item B . $host_lookup_failed
-=item . originator_gid
+TRUE if there was an attempt to look up the host's name from its IP address, but the attempt returned a negative result.
-The group id under which the process that called Exim was running as when the message was received.
+=item B + $local_error_message
-=item . originator_uid
+TRUE if the message is a locally-generated error message.
-The user id under which the process that called Exim was running as when the message was received.
+=item S . $local_scan_data
-=item . received_count
+The text returned by the local_scan() function when a message is received.
-The number of Received: header lines in the message.
+=item B . $manually_thawed
-=item + received_time
+TRUE when the message has been manually thawed.
-The epoch time at which the message was received.
+=item N . $max_received_linelength
-=item . recipients_count
+The number of bytes in the longest line that was received as part of the message, not counting line termination characters.
-The number of envelope recipients that came with the message.
+=item N . $message_age
-=item . sender_host_port
+The number of seconds since the message was received.
-The port number that was used on the remote host for network-originated messages.
+=item S # $message_body
-=item + warning_count
+The message's body. Unlike Exim's variable of the same name, this variable contains the entire message body. Newlines and nulls are replaced by spaces.
-The number of delay warnings which have been sent for this message.
+=item B + $message_body_missing
-=back
+TRUE is a message's spool data file (-D file) is missing or unreadable.
-=head2 String variables
+=item N . $message_body_size
-=over 4
+The size of the body in bytes.
-=item . acl_c0-acl_c9, acl_m0-acl_m9
+=item S . $message_exim_id, $message_id
-User definable variables.
+The unique message id that is used by Exim to identify the message. $message_id is deprecated as of Exim 4.53.
-=item . authenticated_id
+=item S . $message_headers
-Optional saved information from authenticators, or the login name of the calling process for locally submitted messages.
+A concatenation of all the header lines except for lines added by routers or transports. RFC2047 decoding is performed
-=item . authenticated_sender
+=item S . $message_headers_raw
-The value of AUTH= param for smtp messages, or a generated value from the calling processes login and qualify domain for locally submitted messages.
+A concatenation of all the header lines except for lines added by routers or transports. No decoding or translation is performed.
-=item # header_*
+=item N . $message_linecount
-The value of the same named message header, for example header_to or header_reply-to. These variables are really closer to Exim's rheader_* variables, with the exception that leading and trailing space is removed.
+The number of lines in the entire message (body and headers).
-=item . interface_address
+=item N . $message_size
-The address of the local IP interface for network-originated messages.
+The size of the message in bytes.
-=item . local_scan_data
+=item N . $originator_gid
-The text returned by the local_scan() function when a message is received.
+The group id under which the process that called Exim was running as when the message was received.
-=item # message_body
+=item S + $originator_login
-The message's body. Unlike Exim's variable of the same name, this variable contains the entire message body. The logic behind this is that the message body is not read unless it is specifically referenced, so under normal circumstances it is not a penalty, but when you need the entire body you need the entire body. Like Exim's copy, newlines and nulls are replaced by spaces.
+The login of the process which called Exim.
-=item . message_headers
+=item N . $originator_uid
-A concatenation of all the header lines except for lines added by routers or transports.
+The user id under which the process that called Exim was running as when the message was received.
-=item . message_id
+=item S . $received_ip_address, $interface_address
-The unique message id that is used by Exim to identify the message.
+The address of the local IP interface for network-originated messages. $interface_address is deprecated as of Exim 4.64
-=item + originator_login
+=item N . $received_port, $interface_port
-The login of the process which called Exim.
+The local port number if network-originated messages. $interface_port is deprecated as of Exim 4.64
-=item . received_protocol
+=item N . $received_count
+
+The number of Received: header lines in the message.
+
+=item S . $received_protocol
The name of the protocol by which the message was received.
-=item # recipients
+=item N . $received_time
+
+The epoch time at which the message was received.
+
+=item S # $recipients
+
+The list of envelope recipients for a message. Unlike Exim's version, this variable always contains every recipient of the message. The recipients are separated by a comma and a space. See also $each_recipients.
+
+=item N . $recipients_count
+
+The number of envelope recipients for the message.
+
+=item S + $recipients_del
+
+The list of delivered envelope recipients for a message. This non-standard variable is in the same format as $recipients and contains the list of already-delivered recipients including any generated addresses. See also $each_recipients_del.
-The list of envelope recipients for a message. Unlike Exim's version, this variable always contains every envelope recipient of the message. The recipients are separated by a comma and a space.
+=item N + $recipients_del_count
-=item + recipients_del
+The number of envelope recipients for the message which have already been delivered. Note that this is the count of original recipients to which the message has been delivered. It does not include generated addresses so it is possible that this number will be less than the number of addresses in the $recipients_del string.
-The list of delivered envelope recipients for a message. This non-standard variable is in the same format as recipients and contains the list of already-delivered recipients.
+=item S + $recipients_undel
-=item + recipients_undel
+The list of undelivered envelope recipients for a message. This non-standard variable is in the same format as $recipients and contains the list of undelivered recipients. See also $each_recipients_undel.
-The list of undelivered envelope recipients for a message. This non-standard variable is in the same format as recipients and contains the list of undelivered recipients.
+=item N + $recipients_undel_count
-=item . reply_address
+The number of envelope recipients for the message which have not yet been delivered.
+
+=item S . $reply_address
The contents of the Reply-To: header line if one exists and it is not empty, or otherwise the contents of the From: header line.
-=item . sender_address
+=item S . $rheader_*, $rh_*
+
+The value of the message's header(s) with the same name. See section 11.5 of Exim's spec.txt for full description.
+
+=item S . $sender_address
The sender's address that was received in the message's envelope. For bounce messages, the value of this variable is the empty string.
-=item . sender_address_domain
+=item S . $sender_address_domain
-The domain part of sender_address.
+The domain part of $sender_address.
-=item . sender_address_local_part
+=item S . $sender_address_local_part
-The local part of sender_address.
+The local part of $sender_address.
-=item . sender_helo_name
+=item S . $sender_helo_name
The HELO or EHLO value supplied for smtp or bsmtp messages.
-=item . sender_host_address
+=item S . $sender_host_address
The remote host's IP address.
-=item . sender_host_authenticated
+=item S . $sender_host_authenticated
The name of the authenticator driver which successfully authenticated the client from which the message was received.
-=item . sender_host_name
+=item S . $sender_host_name
The remote host's name as obtained by looking up its IP address.
-=item . sender_ident
+=item N . $sender_host_port
+
+The port number that was used on the remote host for network-originated messages.
+
+=item S . $sender_ident
The identification received in response to an RFC 1413 request for remote messages, the login name of the user that called Exim for locally generated messages.
-=item . tls_cipher
+=item B + $sender_local
-The cipher suite that was negotiated for encrypted SMTP connections.
+TRUE if the message was locally generated.
+
+=item B + $sender_set_untrusted
-=item . tls_peerdn
+TRUE if the envelope sender of this message was set by an untrusted local caller.
-The value of the Distinguished Name of the certificate if Exim is configured to request one.
+=item S + $shown_message_size
-=back
+This non-standard variable contains the formatted size string. That is, for a message whose $message_size is 66566 bytes, $shown_message_size is 65K.
-=head1 EXAMPLES
+=item S . $smtp_active_hostname
-=over 4
+The value of the active host name when the message was received, as specified by the "smtp_active_hostname" option.
-=item exipick 'deliver_freeze'
+=item S . $spam_score
-Display only frozen messages.
+The spam score of the message, for example '3.4' or '30.5'. (Requires exiscan or WITH_CONTENT_SCAN)
-=item exipick 'received_protocol eq asmtp' 'message_age < 20m'
+=item S . $spam_score_int
-Display only messages wich were delivered over an authenticated smtp session in the last 20 minutes.
+The spam score of the message, multiplied by ten, as an integer value. For instance '34' or '305'. (Requires exiscan or WITH_CONTENT_SCAN)
-=item exipick -bpc 'message_size > 200K'
+=item B . $tls_certificate_verified
-Display a count of messages in the queue which are over 200 kilobytes in size.
+TRUE if a TLS certificate was verified when the message was received.
-=item exipick -or 'sender_helo_name =~ /^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$/' 'sender_helo_name = _'
+=item S . $tls_cipher
-Display message which have a HELO string which either is an IP address or contains an underscore.
+The cipher suite that was negotiated for encrypted SMTP connections.
-=back
+=item S . $tls_peerdn
+
+The value of the Distinguished Name of the certificate if Exim is configured to request one
-=head1 REQUIREMENTS
+=item S . $tls_sni
-None that I know of, except an Exim installation. Your life will also be a lot easier if you set $spool at the top of the script to your install's spool directory.
+The value of the Server Name Indication TLS extension sent by a client, if one was sent.
-=head1 ACKNOWLEDGEMENTS
+=item N + $warning_count
-Although I conceived of the concept for this program independently, the name 'exipick' was taken from the Exim WishList and was suggested by Jeffrey Goldberg.
+The number of delay warnings which have been sent for this message.
-Thank you to Philip Hazel for writing Exim. Of course this program exists because of Exim, but more specifically the message parsing code is based on Exim's and some of this documentation was copy/pasted from Exim's.
+=back
=head1 CONTACT
projects / exim.git / blobdiff