* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2016 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
int ovector[3*(EXPAND_MAXN+1)];
uschar * s = string_copy(subject); /* de-constifying */
int n = pcre_exec(re, NULL, CS s, Ustrlen(s), 0,
- PCRE_EOPT | options, ovector, sizeof(ovector)/sizeof(int));
+ PCRE_EOPT | options, ovector, nelem(ovector));
BOOL yield = n >= 0;
if (n == 0) n = EXPAND_MAXN + 1;
if (yield)
{
int nn;
- expand_nmax = (setup < 0)? 0 : setup + 1;
- for (nn = (setup < 0)? 0 : 2; nn < n*2; nn += 2)
+ expand_nmax = setup < 0 ? 0 : setup + 1;
+ for (nn = setup < 0 ? 0 : 2; nn < n*2; nn += 2)
{
expand_nstring[expand_nmax] = s + ovector[nn];
expand_nlength[expand_nmax++] = ovector[nn+1] - ovector[nn];
void
set_process_info(const char *format, ...)
{
-int len = sprintf(CS process_info, "%5d ", (int)getpid());
+gstring gs = { .size = PROCESS_INFO_SIZE - 2, .ptr = 0, .s = process_info };
+gstring * g;
+int len;
va_list ap;
+
+g = string_fmt_append(&gs, "%5d ", (int)getpid());
+len = g->ptr;
va_start(ap, format);
-if (!string_vformat(process_info + len, PROCESS_INFO_SIZE - len - 2, format, ap))
- Ustrcpy(process_info + len, "**** string overflowed buffer ****");
-len = Ustrlen(process_info);
-process_info[len+0] = '\n';
-process_info[len+1] = '\0';
-process_info_len = len + 1;
+if (!string_vformat(g, FALSE, format, ap))
+ {
+ gs.ptr = len;
+ g = string_cat(&gs, US"**** string overflowed buffer ****");
+ }
+g = string_catn(g, US"\n", 1);
+string_from_gstring(g);
+process_info_len = g->ptr;
DEBUG(D_process_info) debug_printf("set_process_info: %s", process_info);
va_end(ap);
}
+/***********************************************
+* Handler for SIGTERM *
+***********************************************/
+static void
+term_handler(int sig)
+{
+ exit(1);
+}
/*************************************************
DEBUG(D_transport|D_receive)
{
- if (!running_in_test_harness)
+ if (!f.running_in_test_harness)
{
debug_printf("tick check: " TIME_T_FMT ".%06lu " TIME_T_FMT ".%06lu\n",
then_tv->tv_sec, (long) then_tv->tv_usec,
{
if (smtp_input)
{
- #ifdef SUPPORT_TLS
- tls_close(TRUE, FALSE); /* Shut down the TLS library */
- #endif
+#ifdef SUPPORT_TLS
+ tls_close(NULL, TLS_NO_SHUTDOWN); /* Shut down the TLS library */
+#endif
(void)close(fileno(smtp_in));
(void)close(fileno(smtp_out));
smtp_in = NULL;
if ((debug_selector & D_resolver) == 0) (void)close(1); /* stdout */
if (debug_selector == 0) /* stderr */
{
- if (!synchronous_delivery)
+ if (!f.synchronous_delivery)
{
(void)close(2);
log_stderr = NULL;
if (igflag)
{
struct passwd *pw = getpwuid(uid);
- if (pw != NULL)
- {
- if (initgroups(pw->pw_name, gid) != 0)
- log_write(0,LOG_MAIN|LOG_PANIC_DIE,"initgroups failed for uid=%ld: %s",
- (long int)uid, strerror(errno));
- }
- else log_write(0, LOG_MAIN|LOG_PANIC_DIE, "cannot run initgroups(): "
- "no passwd entry for uid=%ld", (long int)uid);
+ if (!pw)
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "cannot run initgroups(): "
+ "no passwd entry for uid=%ld", (long int)uid);
+
+ if (initgroups(pw->pw_name, gid) != 0)
+ log_write(0,LOG_MAIN|LOG_PANIC_DIE,"initgroups failed for uid=%ld: %s",
+ (long int)uid, strerror(errno));
}
if (setgid(gid) < 0 || setuid(uid) < 0)
- {
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "unable to set gid=%ld or uid=%ld "
"(euid=%ld): %s", (long int)gid, (long int)uid, (long int)euid, msg);
- }
}
/* Debugging output included uid/gid and all groups */
DEBUG(D_uid)
{
int group_count, save_errno;
- gid_t group_list[NGROUPS_MAX];
+ gid_t group_list[EXIM_GROUPLIST_SIZE];
debug_printf("changed uid/gid: %s\n uid=%ld gid=%ld pid=%ld\n", msg,
(long int)geteuid(), (long int)getegid(), (long int)getpid());
- group_count = getgroups(NGROUPS_MAX, group_list);
+ group_count = getgroups(nelem(group_list), group_list);
save_errno = errno;
debug_printf(" auxiliary group list:");
if (group_count > 0)
*/
void
-exim_exit(int rc)
+exim_exit(int rc, const uschar * process)
{
search_tidyup();
DEBUG(D_any)
- debug_printf(">>>>>>>>>>>>>>>> Exim pid=%d terminating with rc=%d "
- ">>>>>>>>>>>>>>>>\n", (int)getpid(), rc);
+ debug_printf(">>>>>>>>>>>>>>>> Exim pid=%d %s%s%sterminating with rc=%d "
+ ">>>>>>>>>>>>>>>>\n", (int)getpid(),
+ process ? "(" : "", process, process ? ") " : "", rc);
exit(rc);
}
+/* Print error string, then die */
+static void
+exim_fail(const char * fmt, ...)
+{
+va_list ap;
+va_start(ap, fmt);
+vfprintf(stderr, fmt, ap);
+exit(EXIT_FAILURE);
+}
+
+
/*************************************************
* Extract port from host address *
{
int port = host_address_extract_port(address);
if (string_is_ip_address(address, NULL) == 0)
- {
- fprintf(stderr, "exim abandoned: \"%s\" is not an IP address\n", address);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim abandoned: \"%s\" is not an IP address\n", address);
return port;
}
* Show supported features *
*************************************************/
-/* This function is called for -bV/--version and for -d to output the optional
-features of the current Exim binary.
-
-Arguments: a FILE for printing
-Returns: nothing
-*/
-
static void
-show_whats_supported(FILE *f)
+show_db_version(FILE * f)
{
- auth_info *authi;
-
#ifdef DB_VERSION_STRING
-fprintf(f, "Berkeley DB: %s\n", DB_VERSION_STRING);
+DEBUG(D_any)
+ {
+ fprintf(f, "Library version: BDB: Compile: %s\n", DB_VERSION_STRING);
+ fprintf(f, " Runtime: %s\n",
+ db_version(NULL, NULL, NULL));
+ }
+else
+ fprintf(f, "Berkeley DB: %s\n", DB_VERSION_STRING);
+
#elif defined(BTREEVERSION) && defined(HASHVERSION)
#ifdef USE_DB
fprintf(f, "Probably Berkeley DB version 1.8x (native mode)\n");
#else
fprintf(f, "Probably Berkeley DB version 1.8x (compatibility mode)\n");
#endif
+
#elif defined(_DBM_RDONLY) || defined(dbm_dirfno)
fprintf(f, "Probably ndbm\n");
#elif defined(USE_TDB)
fprintf(f, "Probably GDBM (compatibility mode)\n");
#endif
#endif
+}
+
+
+/* This function is called for -bV/--version and for -d to output the optional
+features of the current Exim binary.
-fprintf(f, "Support for:");
+Arguments: a FILE for printing
+Returns: nothing
+*/
+
+static void
+show_whats_supported(FILE * fp)
+{
+auth_info * authi;
+
+DEBUG(D_any) {} else show_db_version(fp);
+
+fprintf(fp, "Support for:");
#ifdef SUPPORT_CRYPTEQ
- fprintf(f, " crypteq");
+ fprintf(fp, " crypteq");
#endif
#if HAVE_ICONV
- fprintf(f, " iconv()");
+ fprintf(fp, " iconv()");
#endif
#if HAVE_IPV6
- fprintf(f, " IPv6");
+ fprintf(fp, " IPv6");
#endif
#ifdef HAVE_SETCLASSRESOURCES
- fprintf(f, " use_setclassresources");
+ fprintf(fp, " use_setclassresources");
#endif
#ifdef SUPPORT_PAM
- fprintf(f, " PAM");
+ fprintf(fp, " PAM");
#endif
#ifdef EXIM_PERL
- fprintf(f, " Perl");
+ fprintf(fp, " Perl");
#endif
#ifdef EXPAND_DLFUNC
- fprintf(f, " Expand_dlfunc");
+ fprintf(fp, " Expand_dlfunc");
#endif
#ifdef USE_TCP_WRAPPERS
- fprintf(f, " TCPwrappers");
+ fprintf(fp, " TCPwrappers");
#endif
#ifdef SUPPORT_TLS
- #ifdef USE_GNUTLS
- fprintf(f, " GnuTLS");
- #else
- fprintf(f, " OpenSSL");
- #endif
+# ifdef USE_GNUTLS
+ fprintf(fp, " GnuTLS");
+# else
+ fprintf(fp, " OpenSSL");
+# endif
#endif
#ifdef SUPPORT_TRANSLATE_IP_ADDRESS
- fprintf(f, " translate_ip_address");
+ fprintf(fp, " translate_ip_address");
#endif
#ifdef SUPPORT_MOVE_FROZEN_MESSAGES
- fprintf(f, " move_frozen_messages");
+ fprintf(fp, " move_frozen_messages");
#endif
#ifdef WITH_CONTENT_SCAN
- fprintf(f, " Content_Scanning");
+ fprintf(fp, " Content_Scanning");
+#endif
+#ifdef SUPPORT_DANE
+ fprintf(fp, " DANE");
#endif
#ifndef DISABLE_DKIM
- fprintf(f, " DKIM");
+ fprintf(fp, " DKIM");
#endif
#ifndef DISABLE_DNSSEC
- fprintf(f, " DNSSEC");
+ fprintf(fp, " DNSSEC");
#endif
#ifndef DISABLE_EVENT
- fprintf(f, " Event");
+ fprintf(fp, " Event");
#endif
#ifdef SUPPORT_I18N
- fprintf(f, " I18N");
+ fprintf(fp, " I18N");
#endif
#ifndef DISABLE_OCSP
- fprintf(f, " OCSP");
+ fprintf(fp, " OCSP");
#endif
#ifndef DISABLE_PRDR
- fprintf(f, " PRDR");
+ fprintf(fp, " PRDR");
#endif
#ifdef SUPPORT_PROXY
- fprintf(f, " PROXY");
+ fprintf(fp, " PROXY");
#endif
#ifdef SUPPORT_SOCKS
- fprintf(f, " SOCKS");
+ fprintf(fp, " SOCKS");
+#endif
+#ifdef SUPPORT_SPF
+ fprintf(fp, " SPF");
#endif
#ifdef TCP_FASTOPEN
deliver_init();
- if (tcp_fastopen_ok) fprintf(f, " TCP_Fast_Open");
+ if (f.tcp_fastopen_ok) fprintf(fp, " TCP_Fast_Open");
#endif
#ifdef EXPERIMENTAL_LMDB
- fprintf(f, " Experimental_LMDB");
+ fprintf(fp, " Experimental_LMDB");
#endif
#ifdef EXPERIMENTAL_QUEUEFILE
- fprintf(f, " Experimental_QUEUEFILE");
-#endif
-#ifdef EXPERIMENTAL_SPF
- fprintf(f, " Experimental_SPF");
+ fprintf(fp, " Experimental_QUEUEFILE");
#endif
#ifdef EXPERIMENTAL_SRS
- fprintf(f, " Experimental_SRS");
+ fprintf(fp, " Experimental_SRS");
#endif
-#ifdef EXPERIMENTAL_BRIGHTMAIL
- fprintf(f, " Experimental_Brightmail");
+#ifdef EXPERIMENTAL_ARC
+ fprintf(fp, " Experimental_ARC");
#endif
-#ifdef EXPERIMENTAL_DANE
- fprintf(f, " Experimental_DANE");
+#ifdef EXPERIMENTAL_BRIGHTMAIL
+ fprintf(fp, " Experimental_Brightmail");
#endif
#ifdef EXPERIMENTAL_DCC
- fprintf(f, " Experimental_DCC");
+ fprintf(fp, " Experimental_DCC");
#endif
#ifdef EXPERIMENTAL_DMARC
- fprintf(f, " Experimental_DMARC");
+ fprintf(fp, " Experimental_DMARC");
#endif
#ifdef EXPERIMENTAL_DSN_INFO
- fprintf(f, " Experimental_DSN_info");
+ fprintf(fp, " Experimental_DSN_info");
#endif
-fprintf(f, "\n");
+#ifdef EXPERIMENTAL_REQUIRETLS
+ fprintf(fp, " Experimental_REQUIRETLS");
+#endif
+#ifdef EXPERIMENTAL_PIPE_CONNECT
+ fprintf(fp, " Experimental_PIPE_CONNECT");
+#endif
+fprintf(fp, "\n");
-fprintf(f, "Lookups (built-in):");
+fprintf(fp, "Lookups (built-in):");
#if defined(LOOKUP_LSEARCH) && LOOKUP_LSEARCH!=2
- fprintf(f, " lsearch wildlsearch nwildlsearch iplsearch");
+ fprintf(fp, " lsearch wildlsearch nwildlsearch iplsearch");
#endif
#if defined(LOOKUP_CDB) && LOOKUP_CDB!=2
- fprintf(f, " cdb");
+ fprintf(fp, " cdb");
#endif
#if defined(LOOKUP_DBM) && LOOKUP_DBM!=2
- fprintf(f, " dbm dbmjz dbmnz");
+ fprintf(fp, " dbm dbmjz dbmnz");
#endif
#if defined(LOOKUP_DNSDB) && LOOKUP_DNSDB!=2
- fprintf(f, " dnsdb");
+ fprintf(fp, " dnsdb");
#endif
#if defined(LOOKUP_DSEARCH) && LOOKUP_DSEARCH!=2
- fprintf(f, " dsearch");
+ fprintf(fp, " dsearch");
#endif
#if defined(LOOKUP_IBASE) && LOOKUP_IBASE!=2
- fprintf(f, " ibase");
+ fprintf(fp, " ibase");
#endif
#if defined(LOOKUP_LDAP) && LOOKUP_LDAP!=2
- fprintf(f, " ldap ldapdn ldapm");
+ fprintf(fp, " ldap ldapdn ldapm");
#endif
#ifdef EXPERIMENTAL_LMDB
- fprintf(f, " lmdb");
+ fprintf(fp, " lmdb");
#endif
#if defined(LOOKUP_MYSQL) && LOOKUP_MYSQL!=2
- fprintf(f, " mysql");
+ fprintf(fp, " mysql");
#endif
#if defined(LOOKUP_NIS) && LOOKUP_NIS!=2
- fprintf(f, " nis nis0");
+ fprintf(fp, " nis nis0");
#endif
#if defined(LOOKUP_NISPLUS) && LOOKUP_NISPLUS!=2
- fprintf(f, " nisplus");
+ fprintf(fp, " nisplus");
#endif
#if defined(LOOKUP_ORACLE) && LOOKUP_ORACLE!=2
- fprintf(f, " oracle");
+ fprintf(fp, " oracle");
#endif
#if defined(LOOKUP_PASSWD) && LOOKUP_PASSWD!=2
- fprintf(f, " passwd");
+ fprintf(fp, " passwd");
#endif
#if defined(LOOKUP_PGSQL) && LOOKUP_PGSQL!=2
- fprintf(f, " pgsql");
+ fprintf(fp, " pgsql");
#endif
#if defined(LOOKUP_REDIS) && LOOKUP_REDIS!=2
- fprintf(f, " redis");
+ fprintf(fp, " redis");
#endif
#if defined(LOOKUP_SQLITE) && LOOKUP_SQLITE!=2
- fprintf(f, " sqlite");
+ fprintf(fp, " sqlite");
#endif
#if defined(LOOKUP_TESTDB) && LOOKUP_TESTDB!=2
- fprintf(f, " testdb");
+ fprintf(fp, " testdb");
#endif
#if defined(LOOKUP_WHOSON) && LOOKUP_WHOSON!=2
- fprintf(f, " whoson");
+ fprintf(fp, " whoson");
#endif
-fprintf(f, "\n");
+fprintf(fp, "\n");
-fprintf(f, "Authenticators:");
-#ifdef AUTH_CRAM_MD5
- fprintf(f, " cram_md5");
-#endif
-#ifdef AUTH_CYRUS_SASL
- fprintf(f, " cyrus_sasl");
-#endif
-#ifdef AUTH_DOVECOT
- fprintf(f, " dovecot");
-#endif
-#ifdef AUTH_GSASL
- fprintf(f, " gsasl");
-#endif
-#ifdef AUTH_HEIMDAL_GSSAPI
- fprintf(f, " heimdal_gssapi");
-#endif
-#ifdef AUTH_PLAINTEXT
- fprintf(f, " plaintext");
-#endif
-#ifdef AUTH_SPA
- fprintf(f, " spa");
-#endif
-#ifdef AUTH_TLS
- fprintf(f, " tls");
-#endif
-fprintf(f, "\n");
+auth_show_supported(fp);
+route_show_supported(fp);
+transport_show_supported(fp);
-fprintf(f, "Routers:");
-#ifdef ROUTER_ACCEPT
- fprintf(f, " accept");
-#endif
-#ifdef ROUTER_DNSLOOKUP
- fprintf(f, " dnslookup");
-#endif
-#ifdef ROUTER_IPLITERAL
- fprintf(f, " ipliteral");
-#endif
-#ifdef ROUTER_IPLOOKUP
- fprintf(f, " iplookup");
-#endif
-#ifdef ROUTER_MANUALROUTE
- fprintf(f, " manualroute");
-#endif
-#ifdef ROUTER_QUERYPROGRAM
- fprintf(f, " queryprogram");
-#endif
-#ifdef ROUTER_REDIRECT
- fprintf(f, " redirect");
-#endif
-fprintf(f, "\n");
-
-fprintf(f, "Transports:");
-#ifdef TRANSPORT_APPENDFILE
- fprintf(f, " appendfile");
- #ifdef SUPPORT_MAILDIR
- fprintf(f, "/maildir");
- #endif
- #ifdef SUPPORT_MAILSTORE
- fprintf(f, "/mailstore");
- #endif
- #ifdef SUPPORT_MBX
- fprintf(f, "/mbx");
- #endif
-#endif
-#ifdef TRANSPORT_AUTOREPLY
- fprintf(f, " autoreply");
-#endif
-#ifdef TRANSPORT_LMTP
- fprintf(f, " lmtp");
-#endif
-#ifdef TRANSPORT_PIPE
- fprintf(f, " pipe");
-#endif
-#ifdef EXPERIMENTAL_QUEUEFILE
- fprintf(f, " queuefile");
-#endif
-#ifdef TRANSPORT_SMTP
- fprintf(f, " smtp");
+#ifdef WITH_CONTENT_SCAN
+malware_show_supported(fp);
#endif
-fprintf(f, "\n");
if (fixed_never_users[0] > 0)
{
int i;
- fprintf(f, "Fixed never_users: ");
+ fprintf(fp, "Fixed never_users: ");
for (i = 1; i <= (int)fixed_never_users[0] - 1; i++)
- fprintf(f, "%d:", (unsigned int)fixed_never_users[i]);
- fprintf(f, "%d\n", (unsigned int)fixed_never_users[i]);
+ fprintf(fp, "%d:", (unsigned int)fixed_never_users[i]);
+ fprintf(fp, "%d\n", (unsigned int)fixed_never_users[i]);
}
-fprintf(f, "Configure owner: %d:%d\n", config_uid, config_gid);
+fprintf(fp, "Configure owner: %d:%d\n", config_uid, config_gid);
-fprintf(f, "Size of off_t: " SIZE_T_FMT "\n", sizeof(off_t));
+fprintf(fp, "Size of off_t: " SIZE_T_FMT "\n", sizeof(off_t));
/* Everything else is details which are only worth reporting when debugging.
Perhaps the tls_version_report should move into this too. */
/* clang defines __GNUC__ (at least, for me) so test for it first */
#if defined(__clang__)
- fprintf(f, "Compiler: CLang [%s]\n", __clang_version__);
+ fprintf(fp, "Compiler: CLang [%s]\n", __clang_version__);
#elif defined(__GNUC__)
- fprintf(f, "Compiler: GCC [%s]\n",
+ fprintf(fp, "Compiler: GCC [%s]\n",
# ifdef __VERSION__
__VERSION__
# else
# endif
);
#else
- fprintf(f, "Compiler: <unknown>\n");
+ fprintf(fp, "Compiler: <unknown>\n");
#endif
#if defined(__GLIBC__) && !defined(__UCLIBC__)
- fprintf(f, "Library version: Glibc: Compile: %d.%d\n",
+ fprintf(fp, "Library version: Glibc: Compile: %d.%d\n",
__GLIBC__, __GLIBC_MINOR__);
if (__GLIBC_PREREQ(2, 1))
- fprintf(f, " Runtime: %s\n",
+ fprintf(fp, " Runtime: %s\n",
gnu_get_libc_version());
#endif
+show_db_version(fp);
+
#ifdef SUPPORT_TLS
- tls_version_report(f);
+ tls_version_report(fp);
#endif
#ifdef SUPPORT_I18N
- utf8_version_report(f);
+ utf8_version_report(fp);
#endif
for (authi = auths_available; *authi->driver_name != '\0'; ++authi)
if (authi->version_report)
- (*authi->version_report)(f);
+ (*authi->version_report)(fp);
/* PCRE_PRERELEASE is either defined and empty or a bare sequence of
characters; unless it's an ancient version of PCRE in which case it
#endif
#define QUOTE(X) #X
#define EXPAND_AND_QUOTE(X) QUOTE(X)
- fprintf(f, "Library version: PCRE: Compile: %d.%d%s\n"
+ fprintf(fp, "Library version: PCRE: Compile: %d.%d%s\n"
" Runtime: %s\n",
PCRE_MAJOR, PCRE_MINOR,
EXPAND_AND_QUOTE(PCRE_PRERELEASE) "",
init_lookup_list();
for (i = 0; i < lookup_list_count; i++)
if (lookup_list[i]->version_report)
- lookup_list[i]->version_report(f);
+ lookup_list[i]->version_report(fp);
#ifdef WHITELIST_D_MACROS
- fprintf(f, "WHITELIST_D_MACROS: \"%s\"\n", WHITELIST_D_MACROS);
+ fprintf(fp, "WHITELIST_D_MACROS: \"%s\"\n", WHITELIST_D_MACROS);
#else
- fprintf(f, "WHITELIST_D_MACROS unset\n");
+ fprintf(fp, "WHITELIST_D_MACROS unset\n");
#endif
#ifdef TRUSTED_CONFIG_LIST
- fprintf(f, "TRUSTED_CONFIG_LIST: \"%s\"\n", TRUSTED_CONFIG_LIST);
+ fprintf(fp, "TRUSTED_CONFIG_LIST: \"%s\"\n", TRUSTED_CONFIG_LIST);
#else
- fprintf(f, "TRUSTED_CONFIG_LIST unset\n");
+ fprintf(fp, "TRUSTED_CONFIG_LIST unset\n");
#endif
} while (0);
"If the string is not recognised, you'll get this help (on stderr).\n"
"\n"
" exim -bI:help this information\n"
-" exim -bI:dscp dscp value keywords known\n"
-" exim -bI:sieve list of supported sieve extensions, one per line.\n"
+" exim -bI:dscp list of known dscp value keywords\n"
+" exim -bI:sieve list of supported sieve extensions\n"
);
return;
case CMDINFO_SIEVE:
/* Handle specific program invocation variants */
if (Ustrcmp(progname, US"-mailq") == 0)
- {
- fprintf(stderr,
+ exim_fail(
"mailq - list the contents of the mail queue\n\n"
"For a list of options, see the Exim documentation.\n");
- exit(EXIT_FAILURE);
- }
/* Generic usage - we output this whatever happens */
-fprintf(stderr,
+exim_fail(
"Exim is a Mail Transfer Agent. It is normally called by Mail User Agents,\n"
"not directly from a shell command line. Options and/or arguments control\n"
"what it does when called. For a list of options, see the Exim documentation.\n");
-
-exit(EXIT_FAILURE);
}
/* The list of commandline macros should be very short.
Accept the N*M complexity. */
-for (m = macros; m; m = m->next) if (m->command_line)
+for (m = macros_user; m; m = m->next) if (m->command_line)
{
found = FALSE;
for (w = whites; *w; ++w)
}
+/*************************************************
+* Expansion testing *
+*************************************************/
+
+/* Expand and print one item, doing macro-processing.
+
+Arguments:
+ item line for expansion
+*/
+
+static void
+expansion_test_line(uschar * line)
+{
+int len;
+BOOL dummy_macexp;
+
+Ustrncpy(big_buffer, line, big_buffer_size);
+big_buffer[big_buffer_size-1] = '\0';
+len = Ustrlen(big_buffer);
+
+(void) macros_expand(0, &len, &dummy_macexp);
+
+if (isupper(big_buffer[0]))
+ {
+ if (macro_read_assignment(big_buffer))
+ printf("Defined macro '%s'\n", mlast->name);
+ }
+else
+ if ((line = expand_string(big_buffer))) printf("%s\n", CS line);
+ else printf("Failed: %s\n", expand_string_message);
+}
+
+
+
/*************************************************
* Entry point and high-level code *
*************************************************/
int sender_address_domain = 0;
int test_retry_arg = -1;
int test_rewrite_arg = -1;
+gid_t original_egid;
BOOL arg_queue_only = FALSE;
BOOL bi_option = FALSE;
BOOL checking = FALSE;
struct stat statbuf;
pid_t passed_qr_pid = (pid_t)0;
int passed_qr_pipe = -1;
-gid_t group_list[NGROUPS_MAX];
+gid_t group_list[EXIM_GROUPLIST_SIZE];
/* For the -bI: flag */
enum commandline_info info_flag = CMDINFO_NONE;
if (route_finduser(US EXIM_USERNAME, &pw, &exim_uid))
{
if (exim_uid == 0)
- {
- fprintf(stderr, "exim: refusing to run with uid 0 for \"%s\"\n",
- EXIM_USERNAME);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: refusing to run with uid 0 for \"%s\"\n", EXIM_USERNAME);
+
/* If ref:name uses a number as the name, route_finduser() returns
TRUE with exim_uid set and pw coerced to NULL. */
if (pw)
exim_gid = pw->pw_gid;
#ifndef EXIM_GROUPNAME
else
- {
- fprintf(stderr,
+ exim_fail(
"exim: ref:name should specify a usercode, not a group.\n"
"exim: can't let you get away with it unless you also specify a group.\n");
- exit(EXIT_FAILURE);
- }
#endif
}
else
- {
- fprintf(stderr, "exim: failed to find uid for user name \"%s\"\n",
- EXIM_USERNAME);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: failed to find uid for user name \"%s\"\n", EXIM_USERNAME);
#endif
#ifdef EXIM_GROUPNAME
if (!route_findgroup(US EXIM_GROUPNAME, &exim_gid))
- {
- fprintf(stderr, "exim: failed to find gid for group name \"%s\"\n",
- EXIM_GROUPNAME);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: failed to find gid for group name \"%s\"\n", EXIM_GROUPNAME);
#endif
#ifdef CONFIGURE_OWNERNAME
if (!route_finduser(US CONFIGURE_OWNERNAME, NULL, &config_uid))
- {
- fprintf(stderr, "exim: failed to find uid for user name \"%s\"\n",
+ exim_fail("exim: failed to find uid for user name \"%s\"\n",
CONFIGURE_OWNERNAME);
- exit(EXIT_FAILURE);
- }
#endif
/* We default the system_filter_user to be the Exim run-time user, as a
#ifdef CONFIGURE_GROUPNAME
if (!route_findgroup(US CONFIGURE_GROUPNAME, &config_gid))
- {
- fprintf(stderr, "exim: failed to find gid for group name \"%s\"\n",
+ exim_fail("exim: failed to find gid for group name \"%s\"\n",
CONFIGURE_GROUPNAME);
- exit(EXIT_FAILURE);
- }
#endif
/* In the Cygwin environment, some initialization used to need doing.
/* Check a field which is patched when we are running Exim within its
testing harness; do a fast initial check, and then the whole thing. */
-running_in_test_harness =
+f.running_in_test_harness =
*running_status == '<' && Ustrcmp(running_status, "<<<testing>>>") == 0;
+if (f.running_in_test_harness)
+ debug_store = TRUE;
/* The C standard says that the equivalent of setlocale(LC_ALL, "C") is obeyed
at the start of a program; however, it seems that some environments do not
because store_malloc writes a log entry on failure. */
if (!(log_buffer = US malloc(LOG_BUFFER_SIZE)))
- {
- fprintf(stderr, "exim: failed to get store for log buffer\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: failed to get store for log buffer\n");
/* Initialize the default log options. */
set_process_info("initializing");
os_restarting_signal(SIGUSR1, usr1_handler);
+/* If running in a dockerized environment, the TERM signal is only
+delegated to the PID 1 if we request it by setting an signal handler */
+if (getpid() == 1) signal(SIGTERM, term_handler);
+
/* SIGHUP is used to get the daemon to reconfigure. It gets set as appropriate
in the daemon code. For the rest of Exim's uses, we ignore it. */
if ((namelen == 5 && Ustrcmp(argv[0], "rmail") == 0) ||
(namelen > 5 && Ustrncmp(argv[0] + namelen - 6, "/rmail", 6) == 0))
{
- dot_ends = FALSE;
+ f.dot_ends = FALSE;
called_as = US"-rmail";
errors_sender_rc = EXIT_SUCCESS;
}
normally be root, but in some esoteric environments it may not be. */
original_euid = geteuid();
+original_egid = getegid();
/* Get the real uid and gid. If the caller is root, force the effective uid/gid
to be the same as the real ones. This makes a difference only if Exim is setuid
if (real_uid == root_uid)
{
- rv = setgid(real_gid);
- if (rv)
- {
- fprintf(stderr, "exim: setgid(%ld) failed: %s\n",
+ if ((rv = setgid(real_gid)))
+ exim_fail("exim: setgid(%ld) failed: %s\n",
(long int)real_gid, strerror(errno));
- exit(EXIT_FAILURE);
- }
- rv = setuid(real_uid);
- if (rv)
- {
- fprintf(stderr, "exim: setuid(%ld) failed: %s\n",
+ if ((rv = setuid(real_uid)))
+ exim_fail("exim: setuid(%ld) failed: %s\n",
(long int)real_uid, strerror(errno));
- exit(EXIT_FAILURE);
- }
}
/* If neither the original real uid nor the original euid was root, Exim is
{
switchchar = arg[3];
argrest += 2;
- queue_2stage = TRUE;
+ f.queue_2stage = TRUE;
}
/* Make -r synonymous with -f, since it is a documented alias */
if (*argrest == 'd')
{
- daemon_listen = TRUE;
- if (*(++argrest) == 'f') background_daemon = FALSE;
+ f.daemon_listen = TRUE;
+ if (*(++argrest) == 'f') f.background_daemon = FALSE;
else if (*argrest != 0) { badarg = TRUE; break; }
}
filter_test |= checking = FTEST_SYSTEM;
if (*(++argrest) != 0) { badarg = TRUE; break; }
if (++i < argc) filter_test_sfile = argv[i]; else
- {
- fprintf(stderr, "exim: file name expected after %s\n", argv[i-1]);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: file name expected after %s\n", argv[i-1]);
}
/* -bf: Run user filter test
{
filter_test |= checking = FTEST_USER;
if (++i < argc) filter_test_ufile = argv[i]; else
- {
- fprintf(stderr, "exim: file name expected after %s\n", argv[i-1]);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: file name expected after %s\n", argv[i-1]);
}
else
{
if (++i >= argc)
- {
- fprintf(stderr, "exim: string expected after %s\n", arg);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: string expected after %s\n", arg);
if (Ustrcmp(argrest, "d") == 0) ftest_domain = argv[i];
else if (Ustrcmp(argrest, "l") == 0) ftest_localpart = argv[i];
else if (Ustrcmp(argrest, "p") == 0) ftest_prefix = argv[i];
{
if (++i >= argc) { badarg = TRUE; break; }
sender_host_address = argv[i];
- host_checking = checking = log_testing_mode = TRUE;
- host_checking_callout = argrest[1] == 'c';
+ host_checking = checking = f.log_testing_mode = TRUE;
+ f.host_checking_callout = argrest[1] == 'c';
message_logs = FALSE;
}
else if (Ustrcmp(argrest, "nq") == 0)
{
- allow_unqualified_sender = FALSE;
- allow_unqualified_recipient = FALSE;
+ f.allow_unqualified_sender = FALSE;
+ f.allow_unqualified_recipient = FALSE;
}
/* -bpxx: List the contents of the mail queue, in various forms. If
/* -bt: address testing mode */
else if (Ustrcmp(argrest, "t") == 0)
- address_test_mode = checking = log_testing_mode = TRUE;
+ f.address_test_mode = checking = f.log_testing_mode = TRUE;
/* -bv: verify addresses */
else if (Ustrcmp(argrest, "v") == 0)
- verify_address_mode = checking = log_testing_mode = TRUE;
+ verify_address_mode = checking = f.log_testing_mode = TRUE;
/* -bvs: verify sender addresses */
else if (Ustrcmp(argrest, "vs") == 0)
{
- verify_address_mode = checking = log_testing_mode = TRUE;
+ verify_address_mode = checking = f.log_testing_mode = TRUE;
verify_as_sender = TRUE;
}
printf("%s\n", CS version_copyright);
version_printed = TRUE;
show_whats_supported(stdout);
- log_testing_mode = TRUE;
+ f.log_testing_mode = TRUE;
}
/* -bw: inetd wait mode, accept a listening socket as stdin */
else if (*argrest == 'w')
{
- inetd_wait_mode = TRUE;
- background_daemon = FALSE;
- daemon_listen = TRUE;
+ f.inetd_wait_mode = TRUE;
+ f.background_daemon = FALSE;
+ f.daemon_listen = TRUE;
if (*(++argrest) != '\0')
- {
- inetd_wait_timeout = readconf_readtime(argrest, 0, FALSE);
- if (inetd_wait_timeout <= 0)
- {
- fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]);
- exit(EXIT_FAILURE);
- }
- }
+ if ((inetd_wait_timeout = readconf_readtime(argrest, 0, FALSE)) <= 0)
+ exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
}
else badarg = TRUE;
Ustrncmp(filename, ALT_CONFIG_PREFIX, len) != 0 ||
Ustrstr(filename, "/../") != NULL) &&
(Ustrcmp(filename, "/dev/null") != 0 || real_uid != root_uid))
- {
- fprintf(stderr, "-C Permission denied\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("-C Permission denied\n");
}
#endif
if (real_uid != root_uid)
&& real_uid != config_uid
#endif
)
- trusted_config = FALSE;
+ f.trusted_config = FALSE;
else
{
FILE *trust_list = Ufopen(TRUSTED_CONFIG_LIST, "rb");
) || /* or */
(statbuf.st_mode & 2) != 0) /* world writeable */
{
- trusted_config = FALSE;
+ f.trusted_config = FALSE;
fclose(trust_list);
}
else
int sep = 0;
const uschar *list = argrest;
uschar *filename;
- while (trusted_config && (filename = string_nextinlist(&list,
+ while (f.trusted_config && (filename = string_nextinlist(&list,
&sep, big_buffer, big_buffer_size)) != NULL)
{
for (i=0; i < nr_configs; i++)
}
if (i == nr_configs)
{
- trusted_config = FALSE;
+ f.trusted_config = FALSE;
break;
}
}
else
{
/* No valid prefixes found in trust_list file. */
- trusted_config = FALSE;
+ f.trusted_config = FALSE;
}
}
}
else
{
/* Could not open trust_list file. */
- trusted_config = FALSE;
+ f.trusted_config = FALSE;
}
}
#else
/* Not root; don't trust config */
- trusted_config = FALSE;
+ f.trusted_config = FALSE;
#endif
}
config_main_filelist = argrest;
- config_changed = TRUE;
+ f.config_changed = TRUE;
}
break;
/* -D: set up a macro definition */
case 'D':
- #ifdef DISABLE_D_OPTION
- fprintf(stderr, "exim: -D is not available in this Exim binary\n");
- exit(EXIT_FAILURE);
- #else
+#ifdef DISABLE_D_OPTION
+ exim_fail("exim: -D is not available in this Exim binary\n");
+#else
{
int ptr = 0;
macro_item *m;
while (isspace(*s)) s++;
if (*s < 'A' || *s > 'Z')
- {
- fprintf(stderr, "exim: macro name set by -D must start with "
+ exim_fail("exim: macro name set by -D must start with "
"an upper case letter\n");
- exit(EXIT_FAILURE);
- }
while (isalnum(*s) || *s == '_')
{
while (isspace(*s)) s++;
}
- for (m = macros; m; m = m->next)
+ for (m = macros_user; m; m = m->next)
if (Ustrcmp(m->name, name) == 0)
- {
- fprintf(stderr, "exim: duplicated -D in command line\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: duplicated -D in command line\n");
- m = macro_create(string_copy(name), string_copy(s), TRUE);
+ m = macro_create(name, s, TRUE);
if (clmacro_count >= MAX_CLMACROS)
- {
- fprintf(stderr, "exim: too many -D options on command line\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: too many -D options on command line\n");
clmacros[clmacro_count++] = string_sprintf("-D%s=%s", m->name,
m->replacement);
}
debug_file = NULL;
if (*argrest == 'd')
{
- debug_daemon = TRUE;
+ f.debug_daemon = TRUE;
argrest++;
}
if (*argrest != 0)
message_reference at it, for logging. */
case 'E':
- local_error_message = TRUE;
+ f.local_error_message = TRUE;
if (mac_ismsgid(argrest)) message_reference = argrest;
break;
{ badarg = TRUE; break; }
}
originator_name = argrest;
- sender_name_forced = TRUE;
+ f.sender_name_forced = TRUE;
break;
#endif
allow_domain_literals = FALSE;
strip_trailing_dot = FALSE;
- if (sender_address == NULL)
- {
- fprintf(stderr, "exim: bad -f address \"%s\": %s\n", argrest, errmess);
- return EXIT_FAILURE;
- }
+ if (!sender_address)
+ exim_fail("exim: bad -f address \"%s\": %s\n", argrest, errmess);
}
- sender_address_forced = TRUE;
+ f.sender_address_forced = TRUE;
}
break;
not to be documented for sendmail but mailx (at least) uses it) */
case 'i':
- if (*argrest == 0) dot_ends = FALSE; else badarg = TRUE;
+ if (*argrest == 0) f.dot_ends = FALSE; else badarg = TRUE;
break;
if(++i < argc) argrest = argv[i]; else
{ badarg = TRUE; break; }
}
- sz = Ustrlen(argrest);
- if (sz > 32)
- {
- fprintf(stderr, "exim: the -L syslog name is too long: \"%s\"\n", argrest);
- return EXIT_FAILURE;
- }
+ if ((sz = Ustrlen(argrest)) > 32)
+ exim_fail("exim: the -L syslog name is too long: \"%s\"\n", argrest);
if (sz < 1)
- {
- fprintf(stderr, "exim: the -L syslog name is too short\n");
- return EXIT_FAILURE;
- }
+ exim_fail("exim: the -L syslog name is too short\n");
cmdline_syslog_name = argrest;
break;
EXIM_SOCKLEN_T size = sizeof(interface_sock);
if (argc != i + 6)
- {
- fprintf(stderr, "exim: too many or too few arguments after -MC\n");
- return EXIT_FAILURE;
- }
+ exim_fail("exim: too many or too few arguments after -MC\n");
if (msg_action_arg >= 0)
- {
- fprintf(stderr, "exim: incompatible arguments\n");
- return EXIT_FAILURE;
- }
+ exim_fail("exim: incompatible arguments\n");
continue_transport = argv[++i];
continue_hostname = argv[++i];
queue_run_pipe = passed_qr_pipe;
if (!mac_ismsgid(argv[i]))
- {
- fprintf(stderr, "exim: malformed message id %s after -MC option\n",
+ exim_fail("exim: malformed message id %s after -MC option\n",
argv[i]);
- return EXIT_FAILURE;
- }
/* Set up $sending_ip_address and $sending_port, unless proxied */
sending_ip_address = host_ntoa(-1, &interface_sock, NULL,
&sending_port);
else
- {
- fprintf(stderr, "exim: getsockname() failed after -MC option: %s\n",
+ exim_fail("exim: getsockname() failed after -MC option: %s\n",
strerror(errno));
- return EXIT_FAILURE;
- }
- if (running_in_test_harness) millisleep(500);
+ if (f.running_in_test_harness) millisleep(500);
break;
}
precedes -MC (see above). The flag indicates that the host to which
Exim is connected has accepted an AUTH sequence. */
- case 'A': smtp_authenticated = TRUE; break;
+ case 'A': f.smtp_authenticated = TRUE; break;
/* -MCD: set the smtp_use_dsn flag; this indicates that the host
that exim is connected to supports the esmtp extension DSN */
default: badarg = TRUE; break;
}
- break;
+ break;
+ }
+
+#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS)
+ /* -MS set REQUIRETLS on (new) message */
+
+ else if (*argrest == 'S')
+ {
+ tls_requiretls |= REQUIRETLS_MSG;
+ break;
}
+#endif
/* -M[x]: various operations on the following list of message ids:
-M deliver the messages, ignoring next retry times and thawing
else if (*argrest == 0)
{
msg_action = MSG_DELIVER;
- forced_delivery = deliver_force_thaw = TRUE;
+ forced_delivery = f.deliver_force_thaw = TRUE;
}
else if (Ustrcmp(argrest, "ar") == 0)
{
msg_action_arg = i + 1;
if (msg_action_arg >= argc)
- {
- fprintf(stderr, "exim: no message ids given after %s option\n", arg);
- return EXIT_FAILURE;
- }
+ exim_fail("exim: no message ids given after %s option\n", arg);
/* Some require only message ids to follow */
{
int j;
for (j = msg_action_arg; j < argc; j++) if (!mac_ismsgid(argv[j]))
- {
- fprintf(stderr, "exim: malformed message id %s after %s option\n",
+ exim_fail("exim: malformed message id %s after %s option\n",
argv[j], arg);
- return EXIT_FAILURE;
- }
goto END_ARG; /* Remaining args are ids */
}
else
{
if (!mac_ismsgid(argv[msg_action_arg]))
- {
- fprintf(stderr, "exim: malformed message id %s after %s option\n",
+ exim_fail("exim: malformed message id %s after %s option\n",
argv[msg_action_arg], arg);
- return EXIT_FAILURE;
- }
i++;
}
break;
case 'N':
if (*argrest == 0)
{
- dont_deliver = TRUE;
+ f.dont_deliver = TRUE;
debug_selector |= D_v;
debug_file = stderr;
}
if (*argrest == 0)
{
if (++i >= argc)
- {
- fprintf(stderr, "exim: string expected after -O\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: string expected after -O\n");
}
break;
if (alias_arg[0] == 0)
{
if (i+1 < argc) alias_arg = argv[++i]; else
- {
- fprintf(stderr, "exim: string expected after -oA\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: string expected after -oA\n");
}
}
if (p != NULL)
{
if (!isdigit(*p))
- {
- fprintf(stderr, "exim: number expected after -oB\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: number expected after -oB\n");
connection_max_messages = Uatoi(p);
}
}
else if (Ustrcmp(argrest, "db") == 0)
{
- synchronous_delivery = FALSE;
+ f.synchronous_delivery = FALSE;
arg_queue_only = FALSE;
queue_only_set = TRUE;
}
else if (Ustrcmp(argrest, "df") == 0 || Ustrcmp(argrest, "di") == 0)
{
- synchronous_delivery = TRUE;
+ f.synchronous_delivery = TRUE;
arg_queue_only = FALSE;
queue_only_set = TRUE;
}
else if (Ustrcmp(argrest, "dq") == 0)
{
- synchronous_delivery = FALSE;
+ f.synchronous_delivery = FALSE;
arg_queue_only = TRUE;
queue_only_set = TRUE;
}
else if (Ustrcmp(argrest, "dqs") == 0)
{
- queue_smtp = TRUE;
+ f.queue_smtp = TRUE;
arg_queue_only = FALSE;
queue_only_set = TRUE;
}
else if (Ustrcmp(argrest, "i") == 0 ||
Ustrcmp(argrest, "itrue") == 0)
- dot_ends = FALSE;
+ f.dot_ends = FALSE;
/* -oM*: Set various characteristics for an incoming message; actually
acted on for trusted callers only. */
else if (*argrest == 'M')
{
if (i+1 >= argc)
- {
- fprintf(stderr, "exim: data expected after -o%s\n", argrest);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: data expected after -o%s\n", argrest);
/* -oMa: Set sender host address */
else if (Ustrcmp(argrest, "Mm") == 0)
{
if (!mac_ismsgid(argv[i+1]))
- {
- fprintf(stderr,"-oMm must be a valid message ID\n");
- exit(EXIT_FAILURE);
- }
- if (!trusted_config)
- {
- fprintf(stderr,"-oMm must be called by a trusted user/config\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("-oMm must be a valid message ID\n");
+ if (!f.trusted_config)
+ exim_fail("-oMm must be called by a trusted user/config\n");
message_reference = argv[++i];
}
else if (Ustrcmp(argrest, "Mr") == 0)
if (received_protocol)
- {
- fprintf(stderr, "received_protocol is set already\n");
- exit(EXIT_FAILURE);
- }
- else received_protocol = argv[++i];
+ exim_fail("received_protocol is set already\n");
+ else
+ received_protocol = argv[++i];
/* -oMs: Set sender host name */
}
else *tp = readconf_readtime(argrest + 1, 0, FALSE);
if (*tp < 0)
- {
- fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
}
/* -oX <list>: Override local_interfaces and/or default daemon ports */
which sets the host protocol and host name */
if (*argrest == 0)
- {
- if (i+1 < argc) argrest = argv[++i]; else
+ if (i+1 < argc)
+ argrest = argv[++i];
+ else
{ badarg = TRUE; break; }
- }
if (*argrest != 0)
{
uschar *hn;
if (received_protocol)
- {
- fprintf(stderr, "received_protocol is set already\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("received_protocol is set already\n");
hn = Ustrchr(argrest, ':');
if (hn == NULL)
- {
received_protocol = argrest;
- }
else
{
int old_pool = store_pool;
case 'q':
receiving_message = FALSE;
if (queue_interval >= 0)
- {
- fprintf(stderr, "exim: -q specified more than once\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: -q specified more than once\n");
/* -qq...: Do queue runs in a 2-stage manner */
if (*argrest == 'q')
{
- queue_2stage = TRUE;
+ f.queue_2stage = TRUE;
argrest++;
}
if (*argrest == 'i')
{
- queue_run_first_delivery = TRUE;
+ f.queue_run_first_delivery = TRUE;
argrest++;
}
if (*argrest == 'f')
{
- queue_run_force = TRUE;
+ f.queue_run_force = TRUE;
if (*++argrest == 'f')
{
- deliver_force_thaw = TRUE;
+ f.deliver_force_thaw = TRUE;
argrest++;
}
}
if (*argrest == 'l')
{
- queue_run_local = TRUE;
+ f.queue_run_local = TRUE;
argrest++;
}
else if ((queue_interval = readconf_readtime(*argrest ? argrest : argv[++i],
0, FALSE)) <= 0)
- {
- fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]);
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
break;
for (i = 0; i < nelem(rsopts); i++)
if (Ustrcmp(argrest, rsopts[i]) == 0)
{
- if (i != 2) queue_run_force = TRUE;
- if (i >= 2) deliver_selectstring_regex = TRUE;
- if (i == 1 || i == 4) deliver_force_thaw = TRUE;
+ if (i != 2) f.queue_run_force = TRUE;
+ if (i >= 2) f.deliver_selectstring_regex = TRUE;
+ if (i == 1 || i == 4) f.deliver_force_thaw = TRUE;
argrest += Ustrlen(rsopts[i]);
}
}
else if (i+1 < argc)
deliver_selectstring = argv[++i];
else
- {
- fprintf(stderr, "exim: string expected after -R\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: string expected after -R\n");
break;
for (i = 0; i < nelem(rsopts); i++)
if (Ustrcmp(argrest, rsopts[i]) == 0)
{
- if (i != 2) queue_run_force = TRUE;
- if (i >= 2) deliver_selectstring_sender_regex = TRUE;
- if (i == 1 || i == 4) deliver_force_thaw = TRUE;
+ if (i != 2) f.queue_run_force = TRUE;
+ if (i >= 2) f.deliver_selectstring_sender_regex = TRUE;
+ if (i == 1 || i == 4) f.deliver_force_thaw = TRUE;
argrest += Ustrlen(rsopts[i]);
}
}
else if (i+1 < argc)
deliver_selectstring_sender = argv[++i];
else
- {
- fprintf(stderr, "exim: string expected after -S\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: string expected after -S\n");
break;
/* -Tqt is an option that is exclusively for use by the testing suite.
tested. Otherwise variability of clock ticks etc. cause problems. */
case 'T':
- if (running_in_test_harness && Ustrcmp(argrest, "qt") == 0)
+ if (f.running_in_test_harness && Ustrcmp(argrest, "qt") == 0)
fudged_queue_times = argv[++i];
else badarg = TRUE;
break;
else if (Ustrcmp(argrest, "i") == 0)
{
extract_recipients = TRUE;
- dot_ends = FALSE;
+ f.dot_ends = FALSE;
}
/* -tls-on-connect: don't wait for STARTTLS (for old clients) */
case 'X':
if (*argrest == '\0')
if (++i >= argc)
- {
- fprintf(stderr, "exim: string expected after -X\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: string expected after -X\n");
break;
case 'z':
if (*argrest == '\0')
- if (++i < argc) log_oneline = argv[i]; else
- {
- fprintf(stderr, "exim: file name expected after %s\n", argv[i-1]);
- exit(EXIT_FAILURE);
- }
+ if (++i < argc)
+ log_oneline = argv[i];
+ else
+ exim_fail("exim: file name expected after %s\n", argv[i-1]);
break;
/* All other initial characters are errors */
/* Failed to recognize the option, or syntax error */
if (badarg)
- {
- fprintf(stderr, "exim abandoned: unknown, malformed, or incomplete "
+ exim_fail("exim abandoned: unknown, malformed, or incomplete "
"option %s\n", arg);
- exit(EXIT_FAILURE);
- }
}
/* Arguments have been processed. Check for incompatibilities. */
if ((
(smtp_input || extract_recipients || recipients_arg < argc) &&
- (daemon_listen || queue_interval >= 0 || bi_option ||
+ (f.daemon_listen || queue_interval >= 0 || bi_option ||
test_retry_arg >= 0 || test_rewrite_arg >= 0 ||
filter_test != FTEST_NONE || (msg_action_arg > 0 && !one_msg_action))
) ||
(
msg_action_arg > 0 &&
- (daemon_listen || queue_interval > 0 || list_options ||
+ (f.daemon_listen || queue_interval > 0 || list_options ||
(checking && msg_action != MSG_LOAD) ||
bi_option || test_retry_arg >= 0 || test_rewrite_arg >= 0)
) ||
(
- (daemon_listen || queue_interval > 0) &&
+ (f.daemon_listen || queue_interval > 0) &&
(sender_address != NULL || list_options || list_queue || checking ||
bi_option)
) ||
(
- daemon_listen && queue_interval == 0
+ f.daemon_listen && queue_interval == 0
) ||
(
- inetd_wait_mode && queue_interval >= 0
+ f.inetd_wait_mode && queue_interval >= 0
) ||
(
list_options &&
) ||
(
verify_address_mode &&
- (address_test_mode || smtp_input || extract_recipients ||
+ (f.address_test_mode || smtp_input || extract_recipients ||
filter_test != FTEST_NONE || bi_option)
) ||
(
- address_test_mode && (smtp_input || extract_recipients ||
+ f.address_test_mode && (smtp_input || extract_recipients ||
filter_test != FTEST_NONE || bi_option)
) ||
(
(!expansion_test || expansion_test_message != NULL)
)
)
- {
- fprintf(stderr, "exim: incompatible command-line options or arguments\n");
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: incompatible command-line options or arguments\n");
/* If debugging is set up, set the file and the file descriptor to pass on to
child processes. It should, of course, be 2 for stderr. Also, force the daemon
{
debug_file = stderr;
debug_fd = fileno(debug_file);
- background_daemon = FALSE;
- if (running_in_test_harness) millisleep(100); /* lets caller finish */
+ f.background_daemon = FALSE;
+ if (f.running_in_test_harness) millisleep(100); /* lets caller finish */
if (debug_selector != D_v) /* -v only doesn't show this */
{
debug_printf("Exim version %s uid=%ld gid=%ld pid=%d D=%x\n",
till after reading the config, which might specify the exim gid. Therefore,
save the group list here first. */
-group_count = getgroups(NGROUPS_MAX, group_list);
-if (group_count < 0)
- {
- fprintf(stderr, "exim: getgroups() failed: %s\n", strerror(errno));
- exit(EXIT_FAILURE);
- }
+if ((group_count = getgroups(nelem(group_list), group_list)) < 0)
+ exim_fail("exim: getgroups() failed: %s\n", strerror(errno));
/* There is a fundamental difference in some BSD systems in the matter of
groups. FreeBSD and BSDI are known to be different; NetBSD and OpenBSD are
list. Calling setgroups() with zero groups on a "different" system results in
an error return. The following code should cope with both types of system.
+ Unfortunately, recent MacOS, which should be a FreeBSD, "helpfully" succeeds
+ the "setgroups() with zero groups" - and changes the egid.
+ Thanks to that we had to stash the original_egid above, for use below
+ in the call to exim_setugid().
+
However, if this process isn't running as root, setgroups() can't be used
since you have to be root to run it, even if throwing away groups. Not being
root here happens only in some unusual configurations. We just ignore the
error. */
-if (setgroups(0, NULL) != 0)
- {
- if (setgroups(1, group_list) != 0 && !unprivileged)
- {
- fprintf(stderr, "exim: setgroups() failed: %s\n", strerror(errno));
- exit(EXIT_FAILURE);
- }
- }
+if (setgroups(0, NULL) != 0 && setgroups(1, group_list) != 0 && !unprivileged)
+ exim_fail("exim: setgroups() failed: %s\n", strerror(errno));
/* If the configuration file name has been altered by an argument on the
command line (either a new file name or a macro definition) and the caller is
configuration file changes and macro definitions haven't happened. */
if (( /* EITHER */
- (!trusted_config || /* Config changed, or */
+ (!f.trusted_config || /* Config changed, or */
!macros_trusted(opt_D_used)) && /* impermissible macros and */
real_uid != root_uid && /* Not root, and */
- !running_in_test_harness /* Not fudged */
+ !f.running_in_test_harness /* Not fudged */
) || /* OR */
expansion_test /* expansion testing */
|| /* OR */
Note that if the invoker is Exim, the logs remain available. Messing with
this causes unlogged successful deliveries. */
- if ((log_stderr != NULL) && (real_uid != exim_uid))
- really_exim = FALSE;
+ if (log_stderr && real_uid != exim_uid)
+ f.really_exim = FALSE;
}
/* Privilege is to be retained for the moment. It may be dropped later,
the real uid to the effective so that subsequent re-execs of Exim are done by a
privileged user. */
-else exim_setugid(geteuid(), getegid(), FALSE, US"forcing real = effective");
+else
+ exim_setugid(geteuid(), original_egid, FALSE, US"forcing real = effective");
/* If testing a filter, open the file(s) now, before wasting time doing other
setups and reading the message. */
-if ((filter_test & FTEST_SYSTEM) != 0)
- {
- filter_sfd = Uopen(filter_test_sfile, O_RDONLY, 0);
- if (filter_sfd < 0)
- {
- fprintf(stderr, "exim: failed to open %s: %s\n", filter_test_sfile,
+if (filter_test & FTEST_SYSTEM)
+ if ((filter_sfd = Uopen(filter_test_sfile, O_RDONLY, 0)) < 0)
+ exim_fail("exim: failed to open %s: %s\n", filter_test_sfile,
strerror(errno));
- return EXIT_FAILURE;
- }
- }
-if ((filter_test & FTEST_USER) != 0)
- {
- filter_ufd = Uopen(filter_test_ufile, O_RDONLY, 0);
- if (filter_ufd < 0)
- {
- fprintf(stderr, "exim: failed to open %s: %s\n", filter_test_ufile,
+if (filter_test & FTEST_USER)
+ if ((filter_ufd = Uopen(filter_test_ufile, O_RDONLY, 0)) < 0)
+ exim_fail("exim: failed to open %s: %s\n", filter_test_ufile,
strerror(errno));
- return EXIT_FAILURE;
- }
- }
/* Initialise lookup_list
If debugging, already called above via version reporting.
init_lookup_list();
#ifdef SUPPORT_I18N
-if (running_in_test_harness) smtputf8_advertise_hosts = NULL;
+if (f.running_in_test_harness) smtputf8_advertise_hosts = NULL;
#endif
/* Read the main runtime configuration data; this gives up if there
directory to "/"! Later we change to $spool_directory. We do it there, because
during readconf_main() some expansion takes place already. */
-/* Store the initial cwd before we change directories */
-if ((initial_cwd = os_getcwd(NULL, 0)) == NULL)
- {
- perror("exim: can't get the current working directory");
- exit(EXIT_FAILURE);
- }
+/* Store the initial cwd before we change directories. Can be NULL if the
+dir has already been unlinked. */
+initial_cwd = os_getcwd(NULL, 0);
/* checking:
-be[m] expansion test -
readconf_main(checking || list_options);
-if (builtin_macros_create_trigger) DEBUG(D_any)
- debug_printf("Builtin macros created (expensive) due to config line '%.*s'\n",
- Ustrlen(builtin_macros_create_trigger)-1, builtin_macros_create_trigger);
/* Now in directory "/" */
for later interrogation. */
if (real_uid == root_uid || real_uid == exim_uid || real_gid == exim_gid)
- admin_user = TRUE;
+ f.admin_user = TRUE;
else
{
int i, j;
- for (i = 0; i < group_count && !admin_user; i++)
+ for (i = 0; i < group_count && !f.admin_user; i++)
if (group_list[i] == exim_gid)
- admin_user = TRUE;
+ f.admin_user = TRUE;
else if (admin_groups)
- for (j = 1; j <= (int)admin_groups[0] && !admin_user; j++)
+ for (j = 1; j <= (int)admin_groups[0] && !f.admin_user; j++)
if (admin_groups[j] == group_list[i])
- admin_user = TRUE;
+ f.admin_user = TRUE;
}
/* Another group of privileged users are the trusted users. These are root,
other message parameters as well. */
if (real_uid == root_uid || real_uid == exim_uid)
- trusted_caller = TRUE;
+ f.trusted_caller = TRUE;
else
{
int i, j;
if (trusted_users)
- for (i = 1; i <= (int)trusted_users[0] && !trusted_caller; i++)
+ for (i = 1; i <= (int)trusted_users[0] && !f.trusted_caller; i++)
if (trusted_users[i] == real_uid)
- trusted_caller = TRUE;
+ f.trusted_caller = TRUE;
if (trusted_groups)
- for (i = 1; i <= (int)trusted_groups[0] && !trusted_caller; i++)
+ for (i = 1; i <= (int)trusted_groups[0] && !f.trusted_caller; i++)
if (trusted_groups[i] == real_gid)
- trusted_caller = TRUE;
- else for (j = 0; j < group_count && !trusted_caller; j++)
+ f.trusted_caller = TRUE;
+ else for (j = 0; j < group_count && !f.trusted_caller; j++)
if (trusted_groups[i] == group_list[j])
- trusted_caller = TRUE;
+ f.trusted_caller = TRUE;
}
/* At this point, we know if the user is privileged and some command-line
-options become possibly imperssible, depending upon the configuration file. */
+options become possibly impermissible, depending upon the configuration file. */
-if (checking && commandline_checks_require_admin && !admin_user) {
- fprintf(stderr, "exim: those command-line flags are set to require admin\n");
- exit(EXIT_FAILURE);
-}
+if (checking && commandline_checks_require_admin && !f.admin_user)
+ exim_fail("exim: those command-line flags are set to require admin\n");
/* Handle the decoding of logging options. */
/* If domain literals are not allowed, check the sender address that was
supplied with -f. Ditto for a stripped trailing dot. */
-if (sender_address != NULL)
+if (sender_address)
{
if (sender_address[sender_address_domain] == '[' && !allow_domain_literals)
- {
- fprintf(stderr, "exim: bad -f address \"%s\": domain literals not "
+ exim_fail("exim: bad -f address \"%s\": domain literals not "
"allowed\n", sender_address);
- return EXIT_FAILURE;
- }
if (f_end_dot && !strip_trailing_dot)
- {
- fprintf(stderr, "exim: bad -f address \"%s.\": domain is malformed "
+ exim_fail("exim: bad -f address \"%s.\": domain is malformed "
"(trailing dot not allowed)\n", sender_address);
- return EXIT_FAILURE;
- }
}
/* See if an admin user overrode our logging. */
-if (cmdline_syslog_name != NULL)
- {
- if (admin_user)
+if (cmdline_syslog_name)
+ if (f.admin_user)
{
syslog_processname = cmdline_syslog_name;
log_file_path = string_copy(CUS"syslog");
}
else
- {
/* not a panic, non-privileged users should not be able to spam paniclog */
- fprintf(stderr,
+ exim_fail(
"exim: you lack sufficient privilege to specify syslog process name\n");
- return EXIT_FAILURE;
- }
- }
/* Paranoia check of maximum lengths of certain strings. There is a check
on the length of the log file path in log.c, which will come into effect
"syslog_processname is longer than 32 chars: aborting");
if (log_oneline)
- if (admin_user)
+ if (f.admin_user)
{
log_write(0, LOG_MAIN, "%s", log_oneline);
return EXIT_SUCCESS;
timestamps_utc is set, because then all times are in UTC anyway. */
if (timezone_string && strcmpic(timezone_string, US"UTC") == 0)
- timestamps_utc = TRUE;
+ f.timestamps_utc = TRUE;
else
{
uschar *envtz = US getenv("TZ");
trusted configuration file (when deliver_drop_privilege is false). */
if ( removed_privilege
- && (!trusted_config || opt_D_used)
+ && (!f.trusted_config || opt_D_used)
&& real_uid == exim_uid)
if (deliver_drop_privilege)
- really_exim = TRUE; /* let logging work normally */
+ f.really_exim = TRUE; /* let logging work normally */
else
log_write(0, LOG_MAIN|LOG_PANIC,
"exim user lost privilege for using %s option",
- trusted_config? "-D" : "-C");
+ f.trusted_config? "-D" : "-C");
/* Start up Perl interpreter if Perl support is configured and there is a
perl_startup option, and the configuration or the command line specifies
{
uschar *errstr;
DEBUG(D_any) debug_printf("Starting Perl interpreter\n");
- errstr = init_perl(opt_perl_startup);
- if (errstr != NULL)
- {
- fprintf(stderr, "exim: error in perl_startup code: %s\n", errstr);
- return EXIT_FAILURE;
- }
+ if ((errstr = init_perl(opt_perl_startup)))
+ exim_fail("exim: error in perl_startup code: %s\n", errstr);
opt_perl_started = TRUE;
}
#endif /* EXIM_PERL */
Don't attempt it if logging is disabled, or if listing variables or if
verifying/testing addresses or expansions. */
-if (((debug_selector & D_any) != 0 || LOGGING(arguments))
- && really_exim && !list_options && !checking)
+if ( (debug_selector & D_any || LOGGING(arguments))
+ && f.really_exim && !list_options && !checking)
{
int i;
uschar *p = big_buffer;
Ustrcpy(p, "cwd= (failed)");
- Ustrncpy(p + 4, initial_cwd, big_buffer_size-5);
+ if (!initial_cwd)
+ p += 13;
+ else
+ {
+ Ustrncpy(p + 4, initial_cwd, big_buffer_size-5);
+ p += 4 + Ustrlen(initial_cwd);
+ /* in case p is near the end and we don't provide enough space for
+ * string_format to be willing to write. */
+ *p = '\0';
+ }
- while (*p) p++;
(void)string_format(p, big_buffer_size - (p - big_buffer), " %d args:", argc);
while (*p) p++;
for (i = 0; i < argc; i++)
(argv[1] == NULL)? US"" : argv[1]);
execv(CS argv[0], (char *const *)argv);
- fprintf(stderr, "exim: exec failed: %s\n", strerror(errno));
- exit(EXIT_FAILURE);
+ exim_fail("exim: exec failed: %s\n", strerror(errno));
}
else
{
configuration file. We leave these prints here to ensure that syslog setup,
logfile setup, and so on has already happened. */
-if (trusted_caller) DEBUG(D_any) debug_printf("trusted user\n");
-if (admin_user) DEBUG(D_any) debug_printf("admin user\n");
+if (f.trusted_caller) DEBUG(D_any) debug_printf("trusted user\n");
+if (f.admin_user) DEBUG(D_any) debug_printf("admin user\n");
/* Only an admin user may start the daemon or force a queue run in the default
configuration, but the queue run restriction can be relaxed. Only an admin
count. Only an admin user can use the test interface to scan for email
(because Exim will be in the spool dir and able to look at mails). */
-if (!admin_user)
+if (!f.admin_user)
{
BOOL debugset = (debug_selector & ~D_v) != 0;
- if (deliver_give_up || daemon_listen || malware_test_file ||
+ if (deliver_give_up || f.daemon_listen || malware_test_file ||
(count_queue && queue_list_requires_admin) ||
(list_queue && queue_list_requires_admin) ||
(queue_interval >= 0 && prod_requires_admin) ||
- (debugset && !running_in_test_harness))
- {
- fprintf(stderr, "exim:%s permission denied\n", debugset? " debugging" : "");
- exit(EXIT_FAILURE);
- }
+ (debugset && !f.running_in_test_harness))
+ exim_fail("exim:%s permission denied\n", debugset? " debugging" : "");
}
/* If the real user is not root or the exim uid, the argument for passing
if (real_uid != root_uid && real_uid != exim_uid &&
(continue_hostname != NULL ||
- (dont_deliver &&
- (queue_interval >= 0 || daemon_listen || msg_action_arg > 0)
- )) && !running_in_test_harness)
- {
- fprintf(stderr, "exim: Permission denied\n");
- return EXIT_FAILURE;
- }
+ (f.dont_deliver &&
+ (queue_interval >= 0 || f.daemon_listen || msg_action_arg > 0)
+ )) && !f.running_in_test_harness)
+ exim_fail("exim: Permission denied\n");
/* If the caller is not trusted, certain arguments are ignored when running for
real, but are permitted when checking things (-be, -bv, -bt, -bh, -bf, -bF).
Note that authority for performing certain actions on messages is tested in the
queue_action() function. */
-if (!trusted_caller && !checking)
+if (!f.trusted_caller && !checking)
{
sender_host_name = sender_host_address = interface_address =
sender_ident = received_protocol = NULL;
/* If the caller is trusted, then they can use -G to suppress_local_fixups. */
if (flag_G)
{
- if (trusted_caller)
+ if (f.trusted_caller)
{
- suppress_local_fixups = suppress_local_fixups_default = TRUE;
+ f.suppress_local_fixups = f.suppress_local_fixups_default = TRUE;
DEBUG(D_acl) debug_printf("suppress_local_fixups forced on by -G\n");
}
else
- {
- fprintf(stderr, "exim: permission denied (-G requires a trusted user)\n");
- return EXIT_FAILURE;
- }
+ exim_fail("exim: permission denied (-G requires a trusted user)\n");
}
/* If an SMTP message is being received check to see if the standard input is a
if (real_uid == root_uid || real_uid == exim_uid || interface_port < 1024)
{
- is_inetd = TRUE;
+ f.is_inetd = TRUE;
sender_host_address = host_ntoa(-1, (struct sockaddr *)(&inetd_sock),
NULL, &sender_host_port);
if (mua_wrapper) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Input from "
"inetd is not supported when mua_wrapper is set");
}
else
- {
- fprintf(stderr,
+ exim_fail(
"exim: Permission denied (unprivileged user, unprivileged port)\n");
- return EXIT_FAILURE;
- }
}
}
}
#ifdef LOAD_AVG_NEEDS_ROOT
if (receiving_message &&
(queue_only_load >= 0 ||
- (is_inetd && smtp_load_reserve >= 0)
+ (f.is_inetd && smtp_load_reserve >= 0)
))
{
load_average = OS_GETLOADAVG();
if (!unprivileged && /* originally had root AND */
!removed_privilege && /* still got root AND */
- !daemon_listen && /* not starting the daemon */
+ !f.daemon_listen && /* not starting the daemon */
queue_interval <= 0 && /* (either kind of daemon) */
( /* AND EITHER */
deliver_drop_privilege || /* requested unprivileged */
queue_interval < 0 && /* not running the queue */
(msg_action_arg < 0 || /* and */
msg_action != MSG_DELIVER) && /* not delivering and */
- (!checking || !address_test_mode) /* not address checking */
+ (!checking || !f.address_test_mode) /* not address checking */
) ) )
exim_setugid(exim_uid, exim_gid, TRUE, US"privilege not needed");
no need to complain then. */
if (rv == -1)
if (!(unprivileged || removed_privilege))
- {
- fprintf(stderr,
- "exim: changing group failed: %s\n", strerror(errno));
- exit(EXIT_FAILURE);
- }
+ exim_fail("exim: changing group failed: %s\n", strerror(errno));
else
DEBUG(D_any) debug_printf("changing group to %ld failed: %s\n",
(long int)exim_gid, strerror(errno));
int yield = EXIT_SUCCESS;
set_process_info("acting on specified messages");
+ /* ACL definitions may be needed when removing a message (-Mrm) because
+ event_action gets expanded */
+
+ if (msg_action == MSG_REMOVE)
+ readconf_rest();
+
if (!one_msg_action)
{
for (i = msg_action_arg; i < argc; i++)
}
/* We used to set up here to skip reading the ACL section, on
- (msg_action_arg > 0 || (queue_interval == 0 && !daemon_listen)
+ (msg_action_arg > 0 || (queue_interval == 0 && !f.daemon_listen)
Now, since the intro of the ${acl } expansion, ACL definitions may be
needed in transports so we lost the optimisation. */
if (test_retry_arg >= argc)
{
printf("-brt needs a domain or address argument\n");
- exim_exit(EXIT_FAILURE);
+ exim_exit(EXIT_FAILURE, US"main");
}
s1 = argv[test_retry_arg++];
s2 = NULL;
printf("\n");
}
- exim_exit(EXIT_SUCCESS);
+ exim_exit(EXIT_SUCCESS, US"main");
}
/* Handle a request to list one or more configuration options */
if (list_options)
{
+ BOOL fail = FALSE;
set_process_info("listing variables");
- if (recipients_arg >= argc) readconf_print(US"all", NULL, flag_n);
- else for (i = recipients_arg; i < argc; i++)
+ if (recipients_arg >= argc)
+ fail = !readconf_print(US"all", NULL, flag_n);
+ else for (i = recipients_arg; i < argc; i++)
+ {
+ if (i < argc - 1 &&
+ (Ustrcmp(argv[i], "router") == 0 ||
+ Ustrcmp(argv[i], "transport") == 0 ||
+ Ustrcmp(argv[i], "authenticator") == 0 ||
+ Ustrcmp(argv[i], "macro") == 0 ||
+ Ustrcmp(argv[i], "environment") == 0))
{
- if (i < argc - 1 &&
- (Ustrcmp(argv[i], "router") == 0 ||
- Ustrcmp(argv[i], "transport") == 0 ||
- Ustrcmp(argv[i], "authenticator") == 0 ||
- Ustrcmp(argv[i], "macro") == 0 ||
- Ustrcmp(argv[i], "environment") == 0))
- {
- readconf_print(argv[i+1], argv[i], flag_n);
- i++;
- }
- else readconf_print(argv[i], NULL, flag_n);
+ fail |= !readconf_print(argv[i+1], argv[i], flag_n);
+ i++;
}
- exim_exit(EXIT_SUCCESS);
+ else
+ fail = !readconf_print(argv[i], NULL, flag_n);
+ }
+ exim_exit(fail ? EXIT_FAILURE : EXIT_SUCCESS, US"main");
}
if (list_config)
{
set_process_info("listing config");
- readconf_print(US"config", NULL, flag_n);
- exim_exit(EXIT_SUCCESS);
+ exim_exit(readconf_print(US"config", NULL, flag_n)
+ ? EXIT_SUCCESS : EXIT_FAILURE, US"main");
}
if (msg_action_arg > 0 && msg_action != MSG_LOAD)
{
- if (prod_requires_admin && !admin_user)
+ if (prod_requires_admin && !f.admin_user)
{
fprintf(stderr, "exim: Permission denied\n");
- exim_exit(EXIT_FAILURE);
+ exim_exit(EXIT_FAILURE, US"main");
}
set_process_info("delivering specified messages");
- if (deliver_give_up) forced_delivery = deliver_force_thaw = TRUE;
+ if (deliver_give_up) forced_delivery = f.deliver_force_thaw = TRUE;
for (i = msg_action_arg; i < argc; i++)
{
int status;
{
fprintf(stderr, "failed to fork delivery process for %s: %s\n", argv[i],
strerror(errno));
- exim_exit(EXIT_FAILURE);
+ exim_exit(EXIT_FAILURE, US"main");
}
else wait(&status);
}
- exim_exit(EXIT_SUCCESS);
+ exim_exit(EXIT_SUCCESS, US"main");
}
/* If only a single queue run is requested, without SMTP listening, we can just
turn into a queue runner, with an optional starting message id. */
-if (queue_interval == 0 && !daemon_listen)
+if (queue_interval == 0 && !f.daemon_listen)
{
DEBUG(D_queue_run) debug_printf("Single queue run%s%s%s%s\n",
(start_queue_run_id == NULL)? US"" : US" starting at ",
else
set_process_info("running the queue (single queue run)");
queue_run(start_queue_run_id, stop_queue_run_id, FALSE);
- exim_exit(EXIT_SUCCESS);
+ exim_exit(EXIT_SUCCESS, US"main");
}
if (!originator_name)
{
- if (!sender_address || (!trusted_caller && filter_test == FTEST_NONE))
+ if (!sender_address || (!f.trusted_caller && filter_test == FTEST_NONE))
{
uschar *name = US pw->pw_gecos;
uschar *amp = Ustrchr(name, '&');
configuration specifies something to use. When running in the test harness,
any setting of unknown_login overrides the actual name. */
-if (originator_login == NULL || running_in_test_harness)
+if (originator_login == NULL || f.running_in_test_harness)
{
if (unknown_login != NULL)
{
for incoming messages via the daemon. The daemon cannot be run in mua_wrapper
mode. */
-if (daemon_listen || inetd_wait_mode || queue_interval > 0)
+if (f.daemon_listen || f.inetd_wait_mode || queue_interval > 0)
{
if (mua_wrapper)
{
if (test_rewrite_arg >= 0)
{
- really_exim = FALSE;
+ f.really_exim = FALSE;
if (test_rewrite_arg >= argc)
{
printf("-brw needs an address argument\n");
- exim_exit(EXIT_FAILURE);
+ exim_exit(EXIT_FAILURE, US"main");
}
rewrite_test(argv[test_rewrite_arg]);
- exim_exit(EXIT_SUCCESS);
+ exim_exit(EXIT_SUCCESS, US"main");
}
/* A locally-supplied message is considered to be coming from a local user
message via SMTP (inetd invocation or otherwise). */
if ((sender_address == NULL && !smtp_input) ||
- (!trusted_caller && filter_test == FTEST_NONE))
+ (!f.trusted_caller && filter_test == FTEST_NONE))
{
- sender_local = TRUE;
+ f.sender_local = TRUE;
/* A trusted caller can supply authenticated_sender and authenticated_id
via -oMas and -oMai and if so, they will already be set. Otherwise, force
!checking)) /* Not running tests, including filter tests */
{
sender_address = originator_login;
- sender_address_forced = FALSE;
+ f.sender_address_forced = FALSE;
sender_address_domain = 0;
}
}
/* Remember whether an untrusted caller set the sender address */
-sender_set_untrusted = sender_address != originator_login && !trusted_caller;
+f.sender_set_untrusted = sender_address != originator_login && !f.trusted_caller;
/* Ensure that the sender address is fully qualified unless it is the empty
address, which indicates an error message, or doesn't exist (root caller, smtp
stdin. Set debug_level to at least D_v to get full output for address testing.
*/
-if (verify_address_mode || address_test_mode)
+if (verify_address_mode || f.address_test_mode)
{
int exit_value = 0;
int flags = vopt_qualify;
}
route_tidyup();
- exim_exit(exit_value);
+ exim_exit(exit_value, US"main");
}
/* Handle expansion checking. Either expand items on the command line, or read
if (msg_action_arg > 0 && msg_action == MSG_LOAD)
{
uschar spoolname[256]; /* Not big_buffer; used in spool_read_header() */
- if (!admin_user)
- {
- fprintf(stderr, "exim: permission denied\n");
- exit(EXIT_FAILURE);
- }
+ if (!f.admin_user)
+ exim_fail("exim: permission denied\n");
message_id = argv[msg_action_arg];
(void)string_format(spoolname, sizeof(spoolname), "%s-H", message_id);
if ((deliver_datafile = spool_open_datafile(message_id)) < 0)
/* Read a test message from a file. We fudge it up to be on stdin, saving
stdin itself for later reading of expansion strings. */
- else if (expansion_test_message != NULL)
+ else if (expansion_test_message)
{
int save_stdin = dup(0);
int fd = Uopen(expansion_test_message, O_RDONLY, 0);
if (fd < 0)
- {
- fprintf(stderr, "exim: failed to open %s: %s\n", expansion_test_message,
+ exim_fail("exim: failed to open %s: %s\n", expansion_test_message,
strerror(errno));
- return EXIT_FAILURE;
- }
(void) dup2(fd, 0);
filter_test = FTEST_USER; /* Fudge to make it look like filter test */
message_ended = END_NOTENDED;
clearerr(stdin); /* Required by Darwin */
}
+ /* Only admin users may see config-file macros this way */
+
+ if (!f.admin_user) macros_user = macros = mlast = NULL;
+
/* Allow $recipients for this testing */
- enable_dollar_recipients = TRUE;
+ f.enable_dollar_recipients = TRUE;
/* Expand command line items */
if (recipients_arg < argc)
- {
while (recipients_arg < argc)
- {
- uschar *s = argv[recipients_arg++];
- uschar *ss = expand_string(s);
- if (ss == NULL) printf ("Failed: %s\n", expand_string_message);
- else printf("%s\n", CS ss);
- }
- }
+ expansion_test_line(argv[recipients_arg++]);
/* Read stdin */
{
char *(*fn_readline)(const char *) = NULL;
void (*fn_addhist)(const char *) = NULL;
+ uschar * s;
- #ifdef USE_READLINE
+#ifdef USE_READLINE
void *dlhandle = set_readline(&fn_readline, &fn_addhist);
- #endif
+#endif
- for (;;)
- {
- uschar *ss;
- uschar *source = get_stdinput(fn_readline, fn_addhist);
- if (source == NULL) break;
- ss = expand_string(source);
- if (ss == NULL)
- printf ("Failed: %s\n", expand_string_message);
- else printf("%s\n", CS ss);
- }
+ while (s = get_stdinput(fn_readline, fn_addhist))
+ expansion_test_line(s);
- #ifdef USE_READLINE
- if (dlhandle != NULL) dlclose(dlhandle);
- #endif
+#ifdef USE_READLINE
+ if (dlhandle) dlclose(dlhandle);
+#endif
}
/* The data file will be open after -Mset */
deliver_datafile = -1;
}
- exim_exit(EXIT_SUCCESS);
+ exim_exit(EXIT_SUCCESS, US"main: expansion test");
}
uschar *nah = expand_string(raw_active_hostname);
if (nah == NULL)
{
- if (!expand_string_forcedfail)
+ if (!f.expand_string_forcedfail)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to expand \"%s\" "
"(smtp_active_hostname): %s", raw_active_hostname,
expand_string_message);
if (!sender_ident_set)
{
sender_ident = NULL;
- if (running_in_test_harness && sender_host_port != 0 &&
+ if (f.running_in_test_harness && sender_host_port != 0 &&
interface_address != NULL && interface_port != 0)
verify_get_ident(1413);
}
smtp_input = TRUE;
smtp_in = stdin;
smtp_out = stdout;
- sender_local = FALSE;
- sender_host_notsocket = TRUE;
+ f.sender_local = FALSE;
+ f.sender_host_notsocket = TRUE;
debug_file = stderr;
debug_fd = fileno(debug_file);
fprintf(stdout, "\n**** SMTP testing session as if from host %s\n"
}
smtp_log_no_mail();
}
- exim_exit(EXIT_SUCCESS);
+ exim_exit(EXIT_SUCCESS, US"main");
}
{
if (version_printed)
{
+ if (Ustrchr(config_main_filelist, ':'))
+ printf("Configuration file search path is %s\n", config_main_filelist);
printf("Configuration file is %s\n", config_main_filename);
return EXIT_SUCCESS;
}
if (mua_wrapper)
{
- synchronous_delivery = TRUE;
+ f.synchronous_delivery = TRUE;
arg_error_handling = ERRORS_STDERR;
remote_max_parallel = 1;
deliver_drop_privilege = TRUE;
- queue_smtp = FALSE;
+ f.queue_smtp = FALSE;
queue_smtp_domains = NULL;
#ifdef SUPPORT_I18N
message_utf8_downconvert = -1; /* convert-if-needed */
logging being sent down the socket and make an identd call to get the
sender_ident. */
-else if (is_inetd)
+else if (f.is_inetd)
{
(void)fclose(stderr);
exim_nullstd(); /* Re-open to /dev/null */
case when it is forced by -oMa. However, we must flag that it isn't a socket,
so that the test for IP options is skipped for -bs input. */
-if (sender_host_address != NULL && sender_fullhost == NULL)
+if (sender_host_address && !sender_fullhost)
{
host_build_sender_fullhost();
set_process_info("handling incoming connection from %s via -oMa",
sender_fullhost);
- sender_host_notsocket = TRUE;
+ f.sender_host_notsocket = TRUE;
}
/* Otherwise, set the sender host as unknown except for inetd calls. This
prevents host checking in the case of -bs not from inetd and also for -bS. */
-else if (!is_inetd) sender_host_unknown = TRUE;
+else if (!f.is_inetd) f.sender_host_unknown = TRUE;
/* If stdout does not exist, then dup stdin to stdout. This can happen
if exim is started from inetd. In this case fd 0 will be set to the socket,
if (smtp_input)
{
- if (!is_inetd) set_process_info("accepting a local %sSMTP message from <%s>",
+ if (!f.is_inetd) set_process_info("accepting a local %sSMTP message from <%s>",
smtp_batched_input? "batched " : "",
(sender_address!= NULL)? sender_address : originator_login);
}
error code is given.) */
if ((!smtp_input || smtp_batched_input) && !receive_check_fs(0))
- {
- fprintf(stderr, "exim: insufficient disk space\n");
- return EXIT_FAILURE;
- }
+ exim_fail("exim: insufficient disk space\n");
/* If this is smtp input of any kind, real or batched, handle the start of the
SMTP session.
if (!smtp_start_session())
{
mac_smtp_fflush();
- exim_exit(EXIT_SUCCESS);
+ exim_exit(EXIT_SUCCESS, US"smtp_start toplevel");
}
}
As a consequence of this, the waitpid() below is now excluded if we are sure
that SIG_IGN works. */
-if (!synchronous_delivery)
+if (!f.synchronous_delivery)
{
#ifdef SA_NOCLDWAIT
struct sigaction act;
if (smtp_batched_input && acl_not_smtp_start != NULL)
{
uschar *user_msg, *log_msg;
- enable_dollar_recipients = TRUE;
+ f.enable_dollar_recipients = TRUE;
(void)acl_check(ACL_WHERE_NOTSMTP_START, NULL, acl_not_smtp_start,
&user_msg, &log_msg);
- enable_dollar_recipients = FALSE;
+ f.enable_dollar_recipients = FALSE;
}
/* Now get the data for the message */
cancel_cutthrough_connection(TRUE, US"receive dropped");
if (more) goto moreloop;
smtp_log_no_mail(); /* Log no mail if configured */
- exim_exit(EXIT_FAILURE);
+ exim_exit(EXIT_FAILURE, US"receive toplevel");
}
}
else
{
cancel_cutthrough_connection(TRUE, US"message setup dropped");
smtp_log_no_mail(); /* Log no mail if configured */
- exim_exit((rc == 0)? EXIT_SUCCESS : EXIT_FAILURE);
+ exim_exit(rc ? EXIT_FAILURE : EXIT_SUCCESS, US"msg setup toplevel");
}
}
/* These options cannot be changed dynamically for non-SMTP messages */
- active_local_sender_retain = local_sender_retain;
- active_local_from_check = local_from_check;
+ f.active_local_sender_retain = local_sender_retain;
+ f.active_local_from_check = local_from_check;
/* Save before any rewriting */
if (error_handling == ERRORS_STDERR)
{
fprintf(stderr, "exim: too many recipients\n");
- exim_exit(EXIT_FAILURE);
+ exim_exit(EXIT_FAILURE, US"main");
}
else
- {
return
moan_to_sender(ERRMESS_TOOMANYRECIP, NULL, NULL, stdin, TRUE)?
errors_sender_rc : EXIT_FAILURE;
- }
#ifdef SUPPORT_I18N
{
allow_utf8_domains = b;
}
#endif
- if (domain == 0 && !allow_unqualified_recipient)
+ if (domain == 0 && !f.allow_unqualified_recipient)
{
recipient = NULL;
errmess = US"unqualified recipient address not allowed";
{
fprintf(stderr, "exim: bad recipient address \"%s\": %s\n",
string_printing(list[i]), errmess);
- exim_exit(EXIT_FAILURE);
+ exim_exit(EXIT_FAILURE, US"main");
}
else
{
if (acl_not_smtp_start)
{
uschar *user_msg, *log_msg;
- enable_dollar_recipients = TRUE;
+ f.enable_dollar_recipients = TRUE;
(void)acl_check(ACL_WHERE_NOTSMTP_START, NULL, acl_not_smtp_start,
&user_msg, &log_msg);
- enable_dollar_recipients = FALSE;
+ f.enable_dollar_recipients = FALSE;
}
/* Pause for a while waiting for input. If none received in that time,
for real; when reading the headers of a message for filter testing,
it is TRUE if the headers were terminated by '.' and FALSE otherwise. */
- if (message_id[0] == 0) exim_exit(EXIT_FAILURE);
+ if (message_id[0] == 0) exim_exit(EXIT_FAILURE, US"main");
} /* Non-SMTP message reception */
/* If this is a filter testing run, there are headers in store, but
if (chdir("/")) /* Get away from wherever the user is running this from */
{
DEBUG(D_receive) debug_printf("chdir(\"/\") failed\n");
- exim_exit(EXIT_FAILURE);
+ exim_exit(EXIT_FAILURE, US"main");
}
/* Now we run either a system filter test, or a user filter test, or both.
explicitly. */
if ((filter_test & FTEST_SYSTEM) != 0)
- {
if (!filter_runtest(filter_sfd, filter_test_sfile, TRUE, more))
- exim_exit(EXIT_FAILURE);
- }
+ exim_exit(EXIT_FAILURE, US"main");
memcpy(filter_sn, filter_n, sizeof(filter_sn));
if ((filter_test & FTEST_USER) != 0)
- {
if (!filter_runtest(filter_ufd, filter_test_ufile, FALSE, more))
- exim_exit(EXIT_FAILURE);
- }
+ exim_exit(EXIT_FAILURE, US"main");
- exim_exit(EXIT_SUCCESS);
+ exim_exit(EXIT_SUCCESS, US"main");
}
/* Else act on the result of message reception. We should not get here unless
are ignored. */
if (mua_wrapper)
- local_queue_only = queue_only_policy = deliver_freeze = FALSE;
+ local_queue_only = f.queue_only_policy = f.deliver_freeze = FALSE;
/* Log the queueing here, when it will get a message id attached, but
not if queue_only is set (case 0). Case 1 doesn't happen here (too many
}
}
- else if (queue_only_policy || deliver_freeze)
+ else if (f.queue_only_policy || f.deliver_freeze)
cancel_cutthrough_connection(TRUE, US"no delivery; queueing");
/* Else do the delivery unless the ACL or local_scan() called for queue only
/* In the parent, wait if synchronous delivery is required. This will
always be the case in MUA wrapper mode. */
- if (synchronous_delivery)
+ if (f.synchronous_delivery)
{
int status;
while (wait(&status) != pid);
log_write(0, LOG_MAIN|LOG_PANIC,
"process %d crashed with signal %d while delivering %s",
(int)pid, status & 0x00ff, message_id);
- if (mua_wrapper && (status & 0xffff) != 0) exim_exit(EXIT_FAILURE);
+ if (mua_wrapper && (status & 0xffff) != 0) exim_exit(EXIT_FAILURE, US"main");
}
}
}
store_reset(reset_point);
}
-exim_exit(EXIT_SUCCESS); /* Never returns */
+exim_exit(EXIT_SUCCESS, US"main"); /* Never returns */
return 0; /* To stop compiler warning */
}
-/*************************************************
-* read as much as requested *
-*************************************************/
-
-/* The syscall read(2) doesn't always returns as much as we want. For
-several reasons it might get less. (Not talking about signals, as syscalls
-are restartable). When reading from a network or pipe connection the sender
-might send in smaller chunks, with delays between these chunks. The read(2)
-may return such a chunk.
-
-The more the writer writes and the smaller the pipe between write and read is,
-the more we get the chance of reading leass than requested. (See bug 2130)
-
-This function read(2)s until we got all the data we *requested*.
-
-Note: This function may block. Use it only if you're sure about the
-amount of data you will get.
-
-Argument:
- fd the file descriptor to read from
- buffer pointer to a buffer of size len
- len the requested(!) amount of bytes
-
-Returns: the amount of bytes read
-*/
-ssize_t
-readn(int fd, void *buffer, size_t len)
-{
- void *next = buffer;
- void *end = buffer + len;
-
- while (next < end)
- {
- ssize_t got = read(fd, next, end - next);
-
- /* I'm not sure if there are signals that can interrupt us,
- for now I assume the worst */
- if (got == -1 && errno == EINTR) continue;
- if (got <= 0) return next - buffer;
- next += got;
- }
-
- return len;
-}
-
/* End of exim.c */
projects / exim.git / blobdiff