# endif
#endif
+#ifndef _TIME_H
+# include <time.h>
+#endif
+
extern void init_lookup_list(void);
static void *
function_store_get(size_t size)
{
-return store_get((int)size);
+/* For now, regard all RE results as potentially tainted. We might need
+more intelligence on this point. */
+return store_get((int)size, TRUE);
}
static void
pcre_free = function_store_free;
}
if (caseless) options |= PCRE_CASELESS;
-yield = pcre_compile(CCS pattern, options, (const char **)&error, &offset, NULL);
+yield = pcre_compile(CCS pattern, options, CCSS &error, &offset, NULL);
pcre_malloc = function_store_get;
pcre_free = function_dummy_free;
if (yield == NULL)
g = string_fmt_append(&gs, "%5d ", (int)getpid());
len = g->ptr;
va_start(ap, format);
-if (!string_vformat(g, FALSE, format, ap))
+if (!string_vformat(g, 0, format, ap))
{
gs.ptr = len;
g = string_cat(&gs, US"**** string overflowed buffer ****");
static void
term_handler(int sig)
{
- exit(1);
+exit(1);
}
when a bug in a function that calls milliwait() caused it to pass invalid data.
That's when I added the check. :-)
-We assume it to be not worth sleeping for under 100us; this value will
+We assume it to be not worth sleeping for under 50us; this value will
require revisiting as hardware advances. This avoids the issue of
a zero-valued timer setting meaning "never fire".
{
sigset_t sigmask;
sigset_t old_sigmask;
+int save_errno = errno;
-if (itval->it_value.tv_usec < 100 && itval->it_value.tv_sec == 0)
+if (itval->it_value.tv_usec < 50 && itval->it_value.tv_sec == 0)
return;
(void)sigemptyset(&sigmask); /* Empty mask */
(void)sigaddset(&sigmask, SIGALRM); /* Add SIGALRM */
(void)sigdelset(&sigmask, SIGALRM); /* Remove SIGALRM */
(void)sigsuspend(&sigmask); /* Until SIGALRM */
(void)sigprocmask(SIG_SETMASK, &old_sigmask, NULL); /* Restore mask */
+errno = save_errno;
+sigalrm_seen = FALSE;
}
void
millisleep(int msec)
{
-struct itimerval itval;
-itval.it_interval.tv_sec = 0;
-itval.it_interval.tv_usec = 0;
-itval.it_value.tv_sec = msec/1000;
-itval.it_value.tv_usec = (msec % 1000) * 1000;
+struct itimerval itval = {.it_interval = {.tv_sec = 0, .tv_usec = 0},
+ .it_value = {.tv_sec = msec/1000,
+ .tv_usec = (msec % 1000) * 1000}};
milliwait(&itval);
}
* Clock tick wait function *
*************************************************/
+#ifdef _POSIX_MONOTONIC_CLOCK
+/* Amount CLOCK_MONOTONIC is behind realtime, at startup. */
+static struct timespec offset_ts;
+
+static void
+exim_clock_init(void)
+{
+struct timeval tv;
+if (clock_gettime(CLOCK_MONOTONIC, &offset_ts) != 0) return;
+(void)gettimeofday(&tv, NULL);
+offset_ts.tv_sec = tv.tv_sec - offset_ts.tv_sec;
+offset_ts.tv_nsec = tv.tv_usec * 1000 - offset_ts.tv_nsec;
+if (offset_ts.tv_nsec >= 0) return;
+offset_ts.tv_sec--;
+offset_ts.tv_nsec += 1000*1000*1000;
+}
+#endif
+
+
/* Exim uses a time + a pid to generate a unique identifier in two places: its
message IDs, and in file names for maildir deliveries. Because some OS now
re-use pids within the same second, sub-second times are now being used.
clocks that go backwards.
Arguments:
- then_tv A timeval which was used to create uniqueness; its usec field
+ tgt_tv A timeval which was used to create uniqueness; its usec field
has been rounded down to the value of the resolution.
We want to be sure the current time is greater than this.
resolution The resolution that was used to divide the microseconds
*/
void
-exim_wait_tick(struct timeval *then_tv, int resolution)
+exim_wait_tick(struct timeval * tgt_tv, int resolution)
{
struct timeval now_tv;
long int now_true_usec;
-(void)gettimeofday(&now_tv, NULL);
-now_true_usec = now_tv.tv_usec;
-now_tv.tv_usec = (now_true_usec/resolution) * resolution;
+#ifdef _POSIX_MONOTONIC_CLOCK
+struct timespec now_ts;
-if (exim_tvcmp(&now_tv, then_tv) <= 0)
+if (clock_gettime(CLOCK_MONOTONIC, &now_ts) == 0)
+ {
+ now_ts.tv_sec += offset_ts.tv_sec;
+ if ((now_ts.tv_nsec += offset_ts.tv_nsec) >= 1000*1000*1000)
+ {
+ now_ts.tv_sec++;
+ now_ts.tv_nsec -= 1000*1000*1000;
+ }
+ now_tv.tv_sec = now_ts.tv_sec;
+ now_true_usec = (now_ts.tv_nsec / (resolution * 1000)) * resolution;
+ now_tv.tv_usec = now_true_usec;
+ }
+else
+#endif
+ {
+ (void)gettimeofday(&now_tv, NULL);
+ now_true_usec = now_tv.tv_usec;
+ now_tv.tv_usec = (now_true_usec/resolution) * resolution;
+ }
+
+while (exim_tvcmp(&now_tv, tgt_tv) <= 0)
{
struct itimerval itval;
itval.it_interval.tv_sec = 0;
itval.it_interval.tv_usec = 0;
- itval.it_value.tv_sec = then_tv->tv_sec - now_tv.tv_sec;
- itval.it_value.tv_usec = then_tv->tv_usec + resolution - now_true_usec;
+ itval.it_value.tv_sec = tgt_tv->tv_sec - now_tv.tv_sec;
+ itval.it_value.tv_usec = tgt_tv->tv_usec + resolution - now_true_usec;
/* We know that, overall, "now" is less than or equal to "then". Therefore, a
negative value for the microseconds is possible only in the case when "now"
- is more than a second less than "then". That means that itval.it_value.tv_sec
+ is more than a second less than "tgt". That means that itval.it_value.tv_sec
is greater than zero. The following correction is therefore safe. */
if (itval.it_value.tv_usec < 0)
if (!f.running_in_test_harness)
{
debug_printf("tick check: " TIME_T_FMT ".%06lu " TIME_T_FMT ".%06lu\n",
- then_tv->tv_sec, (long) then_tv->tv_usec,
+ tgt_tv->tv_sec, (long) tgt_tv->tv_usec,
now_tv.tv_sec, (long) now_tv.tv_usec);
- debug_printf("waiting " TIME_T_FMT ".%06lu\n",
+ debug_printf("waiting " TIME_T_FMT ".%06lu sec\n",
itval.it_value.tv_sec, (long) itval.it_value.tv_usec);
}
}
milliwait(&itval);
+
+ /* Be prapared to go around if the kernel does not implement subtick
+ granularity (GNU Hurd) */
+
+ (void)gettimeofday(&now_tv, NULL);
+ now_true_usec = now_tv.tv_usec;
+ now_tv.tv_usec = (now_true_usec/resolution) * resolution;
}
}
{
if (devnull < 0) devnull = open("/dev/null", O_RDWR);
if (devnull < 0) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s",
- string_open_failed(errno, "/dev/null"));
+ string_open_failed(errno, "/dev/null", NULL));
if (devnull != i) (void)dup2(devnull, i);
}
}
{
if (smtp_input)
{
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
tls_close(NULL, TLS_NO_SHUTDOWN); /* Shut down the TLS library */
#endif
(void)close(fileno(smtp_in));
exim_exit(int rc, const uschar * process)
{
search_tidyup();
+store_exit();
DEBUG(D_any)
debug_printf(">>>>>>>>>>>>>>>> Exim pid=%d %s%s%sterminating with rc=%d "
">>>>>>>>>>>>>>>>\n", (int)getpid(),
}
+void
+exim_underbar_exit(int rc, const uschar * process)
+{
+store_exit();
+DEBUG(D_any)
+ debug_printf(">>>>>>>>>>>>>>>> Exim pid=%d %s%s%sterminating with rc=%d "
+ ">>>>>>>>>>>>>>>>\n", (int)getpid(),
+ process ? "(" : "", process, process ? ") " : "", rc);
+_exit(rc);
+}
+
+
/* Print error string, then die */
static void
#ifdef USE_TCP_WRAPPERS
fprintf(fp, " TCPwrappers");
#endif
-#ifdef SUPPORT_TLS
-# ifdef USE_GNUTLS
+#ifdef USE_GNUTLS
fprintf(fp, " GnuTLS");
-# else
+#endif
+#ifdef USE_OPENSSL
fprintf(fp, " OpenSSL");
-# endif
#endif
#ifdef SUPPORT_TRANSLATE_IP_ADDRESS
fprintf(fp, " translate_ip_address");
#ifndef DISABLE_OCSP
fprintf(fp, " OCSP");
#endif
+#ifndef DISABLE_PIPE_CONNECT
+ fprintf(fp, " PIPE_CONNECT");
+#endif
#ifndef DISABLE_PRDR
fprintf(fp, " PRDR");
#endif
#ifdef SUPPORT_SPF
fprintf(fp, " SPF");
#endif
+#ifdef SUPPORT_DMARC
+ fprintf(fp, " DMARC");
+#endif
#ifdef TCP_FASTOPEN
- deliver_init();
+ tcp_init();
if (f.tcp_fastopen_ok) fprintf(fp, " TCP_Fast_Open");
#endif
-#ifdef EXPERIMENTAL_LMDB
- fprintf(fp, " Experimental_LMDB");
-#endif
-#ifdef EXPERIMENTAL_QUEUEFILE
- fprintf(fp, " Experimental_QUEUEFILE");
-#endif
-#ifdef EXPERIMENTAL_SRS
- fprintf(fp, " Experimental_SRS");
-#endif
#ifdef EXPERIMENTAL_ARC
fprintf(fp, " Experimental_ARC");
#endif
#ifdef EXPERIMENTAL_DCC
fprintf(fp, " Experimental_DCC");
#endif
-#ifdef EXPERIMENTAL_DMARC
- fprintf(fp, " Experimental_DMARC");
-#endif
#ifdef EXPERIMENTAL_DSN_INFO
fprintf(fp, " Experimental_DSN_info");
#endif
-#ifdef EXPERIMENTAL_PIPE_CONNECT
- fprintf(fp, " Experimental_PIPE_CONNECT");
+#ifdef EXPERIMENTAL_LMDB
+ fprintf(fp, " Experimental_LMDB");
+#endif
+#ifdef EXPERIMENTAL_QUEUE_RAMP
+ fprintf(fp, " Experimental_Queue_Ramp");
+#endif
+#ifdef EXPERIMENTAL_QUEUEFILE
+ fprintf(fp, " Experimental_QUEUEFILE");
+#endif
+#if defined(EXPERIMENTAL_SRS) || defined(EXPERIMENTAL_SRS_NATIVE)
+ fprintf(fp, " Experimental_SRS");
+#endif
+#ifdef EXPERIMENTAL_TLS_RESUME
+ fprintf(fp, " Experimental_TLS_resume");
#endif
fprintf(fp, "\n");
show_db_version(fp);
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
tls_version_report(fp);
#endif
#ifdef SUPPORT_I18N
utf8_version_report(fp);
#endif
+#ifdef SUPPORT_SPF
+ spf_lib_version_report(fp);
+#endif
for (auth_info * authi = auths_available; *authi->driver_name != '\0'; ++authi)
if (authi->version_report)
void *dlhandle_curses = dlopen("libcurses." DYNLIB_FN_EXT, RTLD_GLOBAL|RTLD_LAZY);
dlhandle = dlopen("libreadline." DYNLIB_FN_EXT, RTLD_GLOBAL|RTLD_NOW);
-if (dlhandle_curses != NULL) dlclose(dlhandle_curses);
+if (dlhandle_curses) dlclose(dlhandle_curses);
-if (dlhandle != NULL)
+if (dlhandle)
{
/* Checked manual pages; at least in GNU Readline 6.1, the prototypes are:
* char * readline (const char *prompt);
*fn_addhist_ptr = (void(*)(const char*))dlsym(dlhandle, "add_history");
}
else
- {
DEBUG(D_any) debug_printf("failed to load readline: %s\n", dlerror());
- }
return dlhandle;
}
#ifdef USE_READLINE
char *readline_line = NULL;
- if (fn_readline != NULL)
+ if (fn_readline)
{
- if ((readline_line = fn_readline((i > 0)? "":"> ")) == NULL) break;
- if (*readline_line != 0 && fn_addhist != NULL) fn_addhist(readline_line);
+ if (!(readline_line = fn_readline((i > 0)? "":"> "))) break;
+ if (*readline_line != 0 && fn_addhist) fn_addhist(readline_line);
p = US readline_line;
}
else
while (ss > p && isspace(ss[-1])) ss--;
if (i > 0)
- {
while (p < ss && isspace(*p)) p++; /* leading space after cont */
- }
g = string_catn(g, p, ss - p);
}
/* Get a list of macros which are whitelisted */
-whitelisted = string_copy_malloc(US WHITELIST_D_MACROS);
+whitelisted = string_copy_perm(US WHITELIST_D_MACROS, FALSE);
prev_char_item = FALSE;
white_count = 0;
for (p = whitelisted; *p != '\0'; ++p)
uschar *real_sender_address;
uschar *originator_home = US"/";
size_t sz;
-void *reset_point;
+rmark reset_point;
struct passwd *pw;
struct stat statbuf;
extern char **environ;
+#ifdef MEASURE_TIMING
+(void)gettimeofday(×tamp_startup, NULL);
+#endif
+
/* If the Exim user and/or group and/or the configuration file owner/group were
defined by ref:name at build time, we must now find the actual uid/gid values.
This is a feature to make the lives of binary distributors easier. */
setlocale(LC_ALL, "C");
+/* Get the offset between CLOCK_MONOTONIC and wallclock */
+
+#ifdef _POSIX_MONOTONIC_CLOCK
+exim_clock_init();
+#endif
+
/* Set up the default handler for timing using alarm(). */
os_non_restarting_signal(SIGALRM, sigalrm_handler);
/* Set up the handler for the data request signal, and set the initial
descriptive text. */
+process_info = store_get(PROCESS_INFO_SIZE, TRUE); /* tainted */
set_process_info("initializing");
os_restarting_signal(SIGUSR1, usr1_handler);
ignore = TRUE;
break;
}
- if (!ignore) { badarg = TRUE; break; }
+ if (!ignore) badarg = TRUE;
}
break;
so has no need of it. */
case 'B':
- if (*argrest == 0) i++; /* Skip over the type */
+ if (!*argrest) i++; /* Skip over the type */
break;
case 'b':
- receiving_message = FALSE; /* Reset TRUE for -bm, -bS, -bs below */
-
- /* -bd: Run in daemon mode, awaiting SMTP connections.
- -bdf: Ditto, but in the foreground.
- */
-
- if (*argrest == 'd')
- {
- f.daemon_listen = TRUE;
- if (*(++argrest) == 'f') f.background_daemon = FALSE;
- else if (*argrest != 0) { badarg = TRUE; break; }
- }
-
- /* -be: Run in expansion test mode
- -bem: Ditto, but read a message from a file first
- */
-
- else if (*argrest == 'e')
- {
- expansion_test = checking = TRUE;
- if (argrest[1] == 'm')
- {
- if (++i >= argc) { badarg = TRUE; break; }
- expansion_test_message = argv[i];
- argrest++;
- }
- if (argrest[1] != 0) { badarg = TRUE; break; }
- }
-
- /* -bF: Run system filter test */
-
- else if (*argrest == 'F')
- {
- filter_test |= checking = FTEST_SYSTEM;
- if (*(++argrest) != 0) { badarg = TRUE; break; }
- if (++i < argc) filter_test_sfile = argv[i]; else
- exim_fail("exim: file name expected after %s\n", argv[i-1]);
- }
-
- /* -bf: Run user filter test
- -bfd: Set domain for filter testing
- -bfl: Set local part for filter testing
- -bfp: Set prefix for filter testing
- -bfs: Set suffix for filter testing
- */
-
- else if (*argrest == 'f')
- {
- if (*(++argrest) == 0)
- {
- filter_test |= checking = FTEST_USER;
- if (++i < argc) filter_test_ufile = argv[i]; else
- exim_fail("exim: file name expected after %s\n", argv[i-1]);
- }
- else
- {
- if (++i >= argc)
- exim_fail("exim: string expected after %s\n", arg);
- if (Ustrcmp(argrest, "d") == 0) ftest_domain = argv[i];
- else if (Ustrcmp(argrest, "l") == 0) ftest_localpart = argv[i];
- else if (Ustrcmp(argrest, "p") == 0) ftest_prefix = argv[i];
- else if (Ustrcmp(argrest, "s") == 0) ftest_suffix = argv[i];
- else { badarg = TRUE; break; }
- }
- }
-
- /* -bh: Host checking - an IP address must follow. */
-
- else if (Ustrcmp(argrest, "h") == 0 || Ustrcmp(argrest, "hc") == 0)
- {
- if (++i >= argc) { badarg = TRUE; break; }
- sender_host_address = argv[i];
- host_checking = checking = f.log_testing_mode = TRUE;
- f.host_checking_callout = argrest[1] == 'c';
- message_logs = FALSE;
- }
-
- /* -bi: This option is used by sendmail to initialize *the* alias file,
- though it has the -oA option to specify a different file. Exim has no
- concept of *the* alias file, but since Sun's YP make script calls
- sendmail this way, some support must be provided. */
-
- else if (Ustrcmp(argrest, "i") == 0) bi_option = TRUE;
-
- /* -bI: provide information, of the type to follow after a colon.
- This is an Exim flag. */
-
- else if (argrest[0] == 'I' && Ustrlen(argrest) >= 2 && argrest[1] == ':')
- {
- uschar *p = &argrest[2];
- info_flag = CMDINFO_HELP;
- if (Ustrlen(p))
- {
- if (strcmpic(p, CUS"sieve") == 0)
- {
- info_flag = CMDINFO_SIEVE;
- info_stdout = TRUE;
- }
- else if (strcmpic(p, CUS"dscp") == 0)
- {
- info_flag = CMDINFO_DSCP;
- info_stdout = TRUE;
- }
- else if (strcmpic(p, CUS"help") == 0)
- {
- info_stdout = TRUE;
- }
- }
- }
-
- /* -bm: Accept and deliver message - the default option. Reinstate
- receiving_message, which got turned off for all -b options. */
-
- else if (Ustrcmp(argrest, "m") == 0) receiving_message = TRUE;
-
- /* -bmalware: test the filename given for malware */
-
- else if (Ustrcmp(argrest, "malware") == 0)
- {
- if (++i >= argc) { badarg = TRUE; break; }
- checking = TRUE;
- malware_test_file = argv[i];
- }
-
- /* -bnq: For locally originating messages, do not qualify unqualified
- addresses. In the envelope, this causes errors; in header lines they
- just get left. */
-
- else if (Ustrcmp(argrest, "nq") == 0)
- {
- f.allow_unqualified_sender = FALSE;
- f.allow_unqualified_recipient = FALSE;
- }
-
- /* -bpxx: List the contents of the mail queue, in various forms. If
- the option is -bpc, just a queue count is needed. Otherwise, if the
- first letter after p is r, then order is random. */
-
- else if (*argrest == 'p')
- {
- if (*(++argrest) == 'c')
- {
- count_queue = TRUE;
- if (*(++argrest) != 0) badarg = TRUE;
- break;
- }
-
- if (*argrest == 'r')
- {
- list_queue_option = 8;
- argrest++;
- }
- else list_queue_option = 0;
-
- list_queue = TRUE;
-
- /* -bp: List the contents of the mail queue, top-level only */
-
- if (*argrest == 0) {}
-
- /* -bpu: List the contents of the mail queue, top-level undelivered */
-
- else if (Ustrcmp(argrest, "u") == 0) list_queue_option += 1;
-
- /* -bpa: List the contents of the mail queue, including all delivered */
-
- else if (Ustrcmp(argrest, "a") == 0) list_queue_option += 2;
-
- /* Unknown after -bp[r] */
-
- else
- {
- badarg = TRUE;
- break;
- }
- }
-
-
- /* -bP: List the configuration variables given as the address list.
- Force -v, so configuration errors get displayed. */
-
- else if (Ustrcmp(argrest, "P") == 0)
- {
- /* -bP config: we need to setup here, because later,
- * when list_options is checked, the config is read already */
- if (argv[i+1] && Ustrcmp(argv[i+1], "config") == 0)
- {
- list_config = TRUE;
- readconf_save_config(version_string);
- }
- else
- {
- list_options = TRUE;
- debug_selector |= D_v;
- debug_file = stderr;
- }
- }
-
- /* -brt: Test retry configuration lookup */
-
- else if (Ustrcmp(argrest, "rt") == 0)
{
- checking = TRUE;
- test_retry_arg = i + 1;
- goto END_ARG;
- }
+ receiving_message = FALSE; /* Reset TRUE for -bm, -bS, -bs below */
- /* -brw: Test rewrite configuration */
+ switch (*argrest++)
+ {
+ /* -bd: Run in daemon mode, awaiting SMTP connections.
+ -bdf: Ditto, but in the foreground.
+ */
+ case 'd':
+ f.daemon_listen = TRUE;
+ if (*argrest == 'f') f.background_daemon = FALSE;
+ else if (*argrest) badarg = TRUE;
+ break;
+
+ /* -be: Run in expansion test mode
+ -bem: Ditto, but read a message from a file first
+ */
+ case 'e':
+ expansion_test = checking = TRUE;
+ if (*argrest == 'm')
+ {
+ if (++i >= argc) { badarg = TRUE; break; }
+ expansion_test_message = argv[i];
+ argrest++;
+ }
+ if (*argrest) badarg = TRUE;
+ break;
+
+ /* -bF: Run system filter test */
+ case 'F':
+ filter_test |= checking = FTEST_SYSTEM;
+ if (*argrest) { badarg = TRUE; break; }
+ if (++i < argc) filter_test_sfile = argv[i]; else
+ exim_fail("exim: file name expected after %s\n", argv[i-1]);
+ break;
+
+ /* -bf: Run user filter test
+ -bfd: Set domain for filter testing
+ -bfl: Set local part for filter testing
+ -bfp: Set prefix for filter testing
+ -bfs: Set suffix for filter testing
+ */
+ case 'f':
+ if (!*argrest)
+ {
+ filter_test |= checking = FTEST_USER;
+ if (++i < argc) filter_test_ufile = argv[i];
+ else exim_fail("exim: file name expected after %s\n", argv[i-1]);
+ }
+ else
+ {
+ if (++i >= argc)
+ exim_fail("exim: string expected after %s\n", arg);
+ if (Ustrcmp(argrest, "d") == 0) ftest_domain = argv[i];
+ else if (Ustrcmp(argrest, "l") == 0) ftest_localpart = argv[i];
+ else if (Ustrcmp(argrest, "p") == 0) ftest_prefix = argv[i];
+ else if (Ustrcmp(argrest, "s") == 0) ftest_suffix = argv[i];
+ else badarg = TRUE;
+ }
+ break;
+
+ /* -bh: Host checking - an IP address must follow. */
+ case 'h':
+ if (!*argrest || Ustrcmp(argrest, "c") == 0)
+ {
+ if (++i >= argc) { badarg = TRUE; break; }
+ sender_host_address = argv[i];
+ host_checking = checking = f.log_testing_mode = TRUE;
+ f.host_checking_callout = *argrest == 'c';
+ message_logs = FALSE;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bi: This option is used by sendmail to initialize *the* alias file,
+ though it has the -oA option to specify a different file. Exim has no
+ concept of *the* alias file, but since Sun's YP make script calls
+ sendmail this way, some support must be provided. */
+ case 'i':
+ if (!*++argrest) bi_option = TRUE;
+ else badarg = TRUE;
+ break;
+
+ /* -bI: provide information, of the type to follow after a colon.
+ This is an Exim flag. */
+ case 'I':
+ if (Ustrlen(argrest) >= 1 && *argrest == ':')
+ {
+ uschar *p = argrest+1;
+ info_flag = CMDINFO_HELP;
+ if (Ustrlen(p))
+ if (strcmpic(p, CUS"sieve") == 0)
+ {
+ info_flag = CMDINFO_SIEVE;
+ info_stdout = TRUE;
+ }
+ else if (strcmpic(p, CUS"dscp") == 0)
+ {
+ info_flag = CMDINFO_DSCP;
+ info_stdout = TRUE;
+ }
+ else if (strcmpic(p, CUS"help") == 0)
+ info_stdout = TRUE;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bm: Accept and deliver message - the default option. Reinstate
+ receiving_message, which got turned off for all -b options.
+ -bmalware: test the filename given for malware */
+ case 'm':
+ if (!*argrest) receiving_message = TRUE;
+ else if (Ustrcmp(argrest, "alware") == 0)
+ {
+ if (++i >= argc) { badarg = TRUE; break; }
+ checking = TRUE;
+ malware_test_file = argv[i];
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bnq: For locally originating messages, do not qualify unqualified
+ addresses. In the envelope, this causes errors; in header lines they
+ just get left. */
+ case 'n':
+ if (Ustrcmp(argrest, "q") == 0)
+ {
+ f.allow_unqualified_sender = FALSE;
+ f.allow_unqualified_recipient = FALSE;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bpxx: List the contents of the mail queue, in various forms. If
+ the option is -bpc, just a queue count is needed. Otherwise, if the
+ first letter after p is r, then order is random. */
+ case 'p':
+ if (*argrest == 'c')
+ {
+ count_queue = TRUE;
+ if (*++argrest) badarg = TRUE;
+ break;
+ }
- else if (Ustrcmp(argrest, "rw") == 0)
- {
- checking = TRUE;
- test_rewrite_arg = i + 1;
- goto END_ARG;
- }
+ if (*argrest == 'r')
+ {
+ list_queue_option = 8;
+ argrest++;
+ }
+ else list_queue_option = 0;
- /* -bS: Read SMTP commands on standard input, but produce no replies -
- all errors are reported by sending messages. */
+ list_queue = TRUE;
- else if (Ustrcmp(argrest, "S") == 0)
- smtp_input = smtp_batched_input = receiving_message = TRUE;
+ /* -bp: List the contents of the mail queue, top-level only */
- /* -bs: Read SMTP commands on standard input and produce SMTP replies
- on standard output. */
+ if (!*argrest) {}
- else if (Ustrcmp(argrest, "s") == 0) smtp_input = receiving_message = TRUE;
+ /* -bpu: List the contents of the mail queue, top-level undelivered */
- /* -bt: address testing mode */
+ else if (Ustrcmp(argrest, "u") == 0) list_queue_option += 1;
- else if (Ustrcmp(argrest, "t") == 0)
- f.address_test_mode = checking = f.log_testing_mode = TRUE;
+ /* -bpa: List the contents of the mail queue, including all delivered */
- /* -bv: verify addresses */
+ else if (Ustrcmp(argrest, "a") == 0) list_queue_option += 2;
- else if (Ustrcmp(argrest, "v") == 0)
- verify_address_mode = checking = f.log_testing_mode = TRUE;
+ /* Unknown after -bp[r] */
- /* -bvs: verify sender addresses */
+ else badarg = TRUE;
+ break;
- else if (Ustrcmp(argrest, "vs") == 0)
- {
- verify_address_mode = checking = f.log_testing_mode = TRUE;
- verify_as_sender = TRUE;
- }
- /* -bV: Print version string and support details */
+ /* -bP: List the configuration variables given as the address list.
+ Force -v, so configuration errors get displayed. */
+ case 'P':
- else if (Ustrcmp(argrest, "V") == 0)
- {
- printf("Exim version %s #%s built %s\n", version_string,
- version_cnumber, version_date);
- printf("%s\n", CS version_copyright);
- version_printed = TRUE;
- show_whats_supported(stdout);
- f.log_testing_mode = TRUE;
- }
+ /* -bP config: we need to setup here, because later,
+ * when list_options is checked, the config is read already */
+ if (*argrest)
+ badarg = TRUE;
+ else if (argv[i+1] && Ustrcmp(argv[i+1], "config") == 0)
+ {
+ list_config = TRUE;
+ readconf_save_config(version_string);
+ }
+ else
+ {
+ list_options = TRUE;
+ debug_selector |= D_v;
+ debug_file = stderr;
+ }
+ break;
+
+ /* -brt: Test retry configuration lookup */
+ case 'r':
+ if (Ustrcmp(argrest, "t") == 0)
+ {
+ checking = TRUE;
+ test_retry_arg = i + 1;
+ goto END_ARG;
+ }
- /* -bw: inetd wait mode, accept a listening socket as stdin */
+ /* -brw: Test rewrite configuration */
- else if (*argrest == 'w')
- {
- f.inetd_wait_mode = TRUE;
- f.background_daemon = FALSE;
- f.daemon_listen = TRUE;
- if (*(++argrest) != '\0')
- if ((inetd_wait_timeout = readconf_readtime(argrest, 0, FALSE)) <= 0)
- exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
+ else if (Ustrcmp(argrest, "w") == 0)
+ {
+ checking = TRUE;
+ test_rewrite_arg = i + 1;
+ goto END_ARG;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bS: Read SMTP commands on standard input, but produce no replies -
+ all errors are reported by sending messages. */
+ case 'S':
+ if (!*argrest)
+ smtp_input = smtp_batched_input = receiving_message = TRUE;
+ else badarg = TRUE;
+ break;
+
+ /* -bs: Read SMTP commands on standard input and produce SMTP replies
+ on standard output. */
+ case 's':
+ if (!*argrest) smtp_input = receiving_message = TRUE;
+ else badarg = TRUE;
+ break;
+
+ /* -bt: address testing mode */
+ case 't':
+ if (!*argrest)
+ f.address_test_mode = checking = f.log_testing_mode = TRUE;
+ else badarg = TRUE;
+ break;
+
+ /* -bv: verify addresses */
+ case 'v':
+ if (!*argrest)
+ verify_address_mode = checking = f.log_testing_mode = TRUE;
+
+ /* -bvs: verify sender addresses */
+
+ else if (Ustrcmp(argrest, "s") == 0)
+ {
+ verify_address_mode = checking = f.log_testing_mode = TRUE;
+ verify_as_sender = TRUE;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bV: Print version string and support details */
+ case 'V':
+ if (!*argrest)
+ {
+ printf("Exim version %s #%s built %s\n", version_string,
+ version_cnumber, version_date);
+ printf("%s\n", CS version_copyright);
+ version_printed = TRUE;
+ show_whats_supported(stdout);
+ f.log_testing_mode = TRUE;
+ }
+ else badarg = TRUE;
+ break;
+
+ /* -bw: inetd wait mode, accept a listening socket as stdin */
+ case 'w':
+ f.inetd_wait_mode = TRUE;
+ f.background_daemon = FALSE;
+ f.daemon_listen = TRUE;
+ if (*argrest)
+ if ((inetd_wait_timeout = readconf_readtime(argrest, 0, FALSE)) <= 0)
+ exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
+ break;
+
+ default:
+ badarg = TRUE;
+ break;
+ }
+ break;
}
- else badarg = TRUE;
- break;
-
/* -C: change configuration file list; ignore if it isn't really
a change! Enforce a prefix check if required. */
else
{
/* Well, the trust list at least is up to scratch... */
- void *reset_point = store_get(0);
+ rmark reset_point = store_mark();
uschar *trusted_configs[32];
int nr_configs = 0;
int i = 0;
&sep, big_buffer, big_buffer_size)) != NULL)
{
for (i=0; i < nr_configs; i++)
- {
if (Ustrcmp(filename, trusted_configs[i]) == 0)
break;
- }
if (i == nr_configs)
{
f.trusted_config = FALSE;
break;
}
}
- store_reset(reset_point);
}
- else
- {
- /* No valid prefixes found in trust_list file. */
+ else /* No valid prefixes found in trust_list file. */
f.trusted_config = FALSE;
- }
+ store_reset(reset_point);
}
}
- else
- {
- /* Could not open trust_list file. */
+ else /* Could not open trust_list file. */
f.trusted_config = FALSE;
- }
}
#else
/* Not root; don't trust config */
if (clmacro_count >= MAX_CLMACROS)
exim_fail("exim: too many -D options on command line\n");
- clmacros[clmacro_count++] = string_sprintf("-D%s=%s", m->name,
- m->replacement);
+ clmacros[clmacro_count++] =
+ string_sprintf("-D%s=%s", m->name, m->replacement);
}
#endif
break;
{ badarg = TRUE; break; }
}
if (*argrest == 0)
- sender_address = string_sprintf(""); /* Ensure writeable memory */
+ *(sender_address = store_get(1, FALSE)) = '\0'; /* Ensure writeable memory */
else
{
uschar *temp = argrest + Ustrlen(argrest) - 1;
#endif
sender_address = parse_extract_address(argrest, &errmess,
&dummy_start, &dummy_end, &sender_address_domain, TRUE);
+ sender_address = string_copy_taint(sender_address, TRUE);
#ifdef SUPPORT_I18N
message_smtputf8 = string_is_utf8(sender_address);
allow_utf8_domains = FALSE;
exim_fail("exim: getsockname() failed after -MC option: %s\n",
strerror(errno));
- if (f.running_in_test_harness) millisleep(500);
+ testharness_pause_ms(500);
break;
}
case 'D': smtp_peer_options |= OPTION_DSN; break;
+ /* -MCd: for debug, set a process-purpose string */
+
+ case 'd': if (++i < argc)
+ process_purpose = string_copy_taint(argv[i], TRUE);
+ else badarg = TRUE;
+ break;
+
/* -MCG: set the queue name, to a non-default value */
case 'G': if (++i < argc) queue_name = string_copy(argv[i]);
case 'S': smtp_peer_options |= OPTION_SIZE; break;
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
/* -MCt: similar to -MCT below but the connection is still open
via a proxy process which handles the TLS context and coding.
Require three arguments for the proxied local address and port,
msg_action = MSG_DELIVER;
deliver_give_up = TRUE;
}
+ else if (Ustrcmp(argrest, "G") == 0)
+ {
+ msg_action = MSG_SETQUEUE;
+ queue_name_dest = argv[++i];
+ }
else if (Ustrcmp(argrest, "mad") == 0)
{
msg_action = MSG_MARK_ALL_DELIVERED;
case 'O':
if (*argrest == 0)
- {
if (++i >= argc)
exim_fail("exim: string expected after -O\n");
- }
break;
case 'o':
-
- /* -oA: Set an argument for the bi command (sendmail's "alternate alias
- file" option). */
-
- if (*argrest == 'A')
- {
- alias_arg = argrest + 1;
- if (alias_arg[0] == 0)
- {
- if (i+1 < argc) alias_arg = argv[++i]; else
- exim_fail("exim: string expected after -oA\n");
- }
- }
-
- /* -oB: Set a connection message max value for remote deliveries */
-
- else if (*argrest == 'B')
- {
- uschar *p = argrest + 1;
- if (p[0] == 0)
- {
- if (i+1 < argc && isdigit((argv[i+1][0]))) p = argv[++i]; else
- {
- connection_max_messages = 1;
- p = NULL;
- }
- }
-
- if (p != NULL)
- {
- if (!isdigit(*p))
- exim_fail("exim: number expected after -oB\n");
- connection_max_messages = Uatoi(p);
- }
- }
-
- /* -odb: background delivery */
-
- else if (Ustrcmp(argrest, "db") == 0)
- {
- f.synchronous_delivery = FALSE;
- arg_queue_only = FALSE;
- queue_only_set = TRUE;
- }
-
- /* -odf: foreground delivery (smail-compatible option); same effect as
- -odi: interactive (synchronous) delivery (sendmail-compatible option)
- */
-
- else if (Ustrcmp(argrest, "df") == 0 || Ustrcmp(argrest, "di") == 0)
+ switch (*argrest++)
{
- f.synchronous_delivery = TRUE;
- arg_queue_only = FALSE;
- queue_only_set = TRUE;
- }
-
- /* -odq: queue only */
+ /* -oA: Set an argument for the bi command (sendmail's "alternate alias
+ file" option). */
+ case 'A':
+ if (!*(alias_arg = argrest))
+ if (i+1 < argc) alias_arg = argv[++i];
+ else exim_fail("exim: string expected after -oA\n");
+ break;
- else if (Ustrcmp(argrest, "dq") == 0)
- {
- f.synchronous_delivery = FALSE;
- arg_queue_only = TRUE;
- queue_only_set = TRUE;
- }
+ /* -oB: Set a connection message max value for remote deliveries */
+ case 'B':
+ {
+ uschar * p = argrest;
+ if (!*p)
+ if (i+1 < argc && isdigit((argv[i+1][0])))
+ p = argv[++i];
+ else
+ {
+ connection_max_messages = 1;
+ p = NULL;
+ }
- /* -odqs: queue SMTP only - do local deliveries and remote routing,
- but no remote delivery */
+ if (p)
+ {
+ if (!isdigit(*p))
+ exim_fail("exim: number expected after -oB\n");
+ connection_max_messages = Uatoi(p);
+ }
+ }
+ break;
- else if (Ustrcmp(argrest, "dqs") == 0)
- {
- f.queue_smtp = TRUE;
- arg_queue_only = FALSE;
- queue_only_set = TRUE;
- }
+ /* -odb: background delivery */
+
+ case 'd':
+ if (Ustrcmp(argrest, "b") == 0)
+ {
+ f.synchronous_delivery = FALSE;
+ arg_queue_only = FALSE;
+ queue_only_set = TRUE;
+ }
+
+ /* -odd: testsuite-only: add no inter-process delays */
+
+ else if (Ustrcmp(argrest, "d") == 0)
+ f.testsuite_delays = FALSE;
+
+ /* -odf: foreground delivery (smail-compatible option); same effect as
+ -odi: interactive (synchronous) delivery (sendmail-compatible option)
+ */
+
+ else if (Ustrcmp(argrest, "f") == 0 || Ustrcmp(argrest, "i") == 0)
+ {
+ f.synchronous_delivery = TRUE;
+ arg_queue_only = FALSE;
+ queue_only_set = TRUE;
+ }
+
+ /* -odq: queue only */
+
+ else if (Ustrcmp(argrest, "q") == 0)
+ {
+ f.synchronous_delivery = FALSE;
+ arg_queue_only = TRUE;
+ queue_only_set = TRUE;
+ }
+
+ /* -odqs: queue SMTP only - do local deliveries and remote routing,
+ but no remote delivery */
+
+ else if (Ustrcmp(argrest, "qs") == 0)
+ {
+ f.queue_smtp = TRUE;
+ arg_queue_only = FALSE;
+ queue_only_set = TRUE;
+ }
+ else badarg = TRUE;
+ break;
- /* -oex: Sendmail error flags. As these are also accepted without the
- leading -o prefix, for compatibility with vacation and other callers,
- they are handled with -e above. */
+ /* -oex: Sendmail error flags. As these are also accepted without the
+ leading -o prefix, for compatibility with vacation and other callers,
+ they are handled with -e above. */
- /* -oi: Set flag so dot doesn't end non-SMTP input (same as -i)
- -oitrue: Another sendmail syntax for the same */
+ /* -oi: Set flag so dot doesn't end non-SMTP input (same as -i)
+ -oitrue: Another sendmail syntax for the same */
- else if (Ustrcmp(argrest, "i") == 0 ||
- Ustrcmp(argrest, "itrue") == 0)
- f.dot_ends = FALSE;
+ case 'i':
+ if (!*argrest || Ustrcmp(argrest, "true") == 0)
+ f.dot_ends = FALSE;
+ else badarg = TRUE;
+ break;
/* -oM*: Set various characteristics for an incoming message; actually
acted on for trusted callers only. */
- else if (*argrest == 'M')
- {
- if (i+1 >= argc)
- exim_fail("exim: data expected after -o%s\n", argrest);
+ case 'M':
+ {
+ if (i+1 >= argc)
+ exim_fail("exim: data expected after -oM%s\n", argrest);
- /* -oMa: Set sender host address */
+ /* -oMa: Set sender host address */
- if (Ustrcmp(argrest, "Ma") == 0) sender_host_address = argv[++i];
+ if (Ustrcmp(argrest, "a") == 0) sender_host_address = argv[++i];
- /* -oMaa: Set authenticator name */
+ /* -oMaa: Set authenticator name */
- else if (Ustrcmp(argrest, "Maa") == 0)
- sender_host_authenticated = argv[++i];
+ else if (Ustrcmp(argrest, "aa") == 0)
+ sender_host_authenticated = argv[++i];
- /* -oMas: setting authenticated sender */
+ /* -oMas: setting authenticated sender */
- else if (Ustrcmp(argrest, "Mas") == 0) authenticated_sender = argv[++i];
+ else if (Ustrcmp(argrest, "as") == 0)
+ authenticated_sender = string_copy_taint(argv[++i], TRUE);
- /* -oMai: setting authenticated id */
+ /* -oMai: setting authenticated id */
- else if (Ustrcmp(argrest, "Mai") == 0) authenticated_id = argv[++i];
+ else if (Ustrcmp(argrest, "ai") == 0)
+ authenticated_id = string_copy_taint(argv[++i], TRUE);
- /* -oMi: Set incoming interface address */
+ /* -oMi: Set incoming interface address */
- else if (Ustrcmp(argrest, "Mi") == 0) interface_address = argv[++i];
+ else if (Ustrcmp(argrest, "i") == 0) interface_address = argv[++i];
- /* -oMm: Message reference */
+ /* -oMm: Message reference */
- else if (Ustrcmp(argrest, "Mm") == 0)
- {
- if (!mac_ismsgid(argv[i+1]))
- exim_fail("-oMm must be a valid message ID\n");
- if (!f.trusted_config)
- exim_fail("-oMm must be called by a trusted user/config\n");
- message_reference = argv[++i];
- }
+ else if (Ustrcmp(argrest, "m") == 0)
+ {
+ if (!mac_ismsgid(argv[i+1]))
+ exim_fail("-oMm must be a valid message ID\n");
+ if (!f.trusted_config)
+ exim_fail("-oMm must be called by a trusted user/config\n");
+ message_reference = argv[++i];
+ }
- /* -oMr: Received protocol */
+ /* -oMr: Received protocol */
- else if (Ustrcmp(argrest, "Mr") == 0)
+ else if (Ustrcmp(argrest, "r") == 0)
- if (received_protocol)
- exim_fail("received_protocol is set already\n");
- else
- received_protocol = argv[++i];
+ if (received_protocol)
+ exim_fail("received_protocol is set already\n");
+ else
+ received_protocol = argv[++i];
- /* -oMs: Set sender host name */
+ /* -oMs: Set sender host name */
- else if (Ustrcmp(argrest, "Ms") == 0) sender_host_name = argv[++i];
+ else if (Ustrcmp(argrest, "s") == 0)
+ sender_host_name = string_copy_taint(argv[++i], TRUE);
- /* -oMt: Set sender ident */
+ /* -oMt: Set sender ident */
- else if (Ustrcmp(argrest, "Mt") == 0)
- {
- sender_ident_set = TRUE;
- sender_ident = argv[++i];
- }
+ else if (Ustrcmp(argrest, "t") == 0)
+ {
+ sender_ident_set = TRUE;
+ sender_ident = argv[++i];
+ }
- /* Else a bad argument */
+ /* Else a bad argument */
- else
- {
- badarg = TRUE;
- break;
- }
- }
-
- /* -om: Me-too flag for aliases. Exim always does this. Some programs
- seem to call this as -m (undocumented), so that is also accepted (see
- above). */
+ else
+ badarg = TRUE;
+ }
+ break;
- else if (Ustrcmp(argrest, "m") == 0) {}
+ /* -om: Me-too flag for aliases. Exim always does this. Some programs
+ seem to call this as -m (undocumented), so that is also accepted (see
+ above). */
+ /* -oo: An ancient flag for old-style addresses which still seems to
+ crop up in some calls (see in SCO). */
- /* -oo: An ancient flag for old-style addresses which still seems to
- crop up in some calls (see in SCO). */
+ case 'm':
+ case 'o':
+ if (*argrest) badarg = TRUE;
+ break;
- else if (Ustrcmp(argrest, "o") == 0) {}
+ /* -oP <name>: set pid file path for daemon
+ -oPX: delete pid file of daemon */
- /* -oP <name>: set pid file path for daemon */
+ case 'P':
+ if (!*argrest) override_pid_file_path = argv[++i];
+ else if (Ustrcmp(argrest, "X") == 0) delete_pid_file();
+ else badarg = TRUE;
+ break;
- else if (Ustrcmp(argrest, "P") == 0)
- override_pid_file_path = argv[++i];
- /* -or <n>: set timeout for non-SMTP acceptance
- -os <n>: set timeout for SMTP acceptance */
+ /* -or <n>: set timeout for non-SMTP acceptance
+ -os <n>: set timeout for SMTP acceptance */
- else if (*argrest == 'r' || *argrest == 's')
- {
- int *tp = (*argrest == 'r')?
- &arg_receive_timeout : &arg_smtp_receive_timeout;
- if (argrest[1] == 0)
- {
- if (i+1 < argc) *tp= readconf_readtime(argv[++i], 0, FALSE);
- }
- else *tp = readconf_readtime(argrest + 1, 0, FALSE);
- if (*tp < 0)
- exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
- }
+ case 'r':
+ case 's':
+ {
+ int * tp = argrest[-1] == 'r'
+ ? &arg_receive_timeout : &arg_smtp_receive_timeout;
+ if (*argrest)
+ *tp = readconf_readtime(argrest, 0, FALSE);
+ else if (i+1 < argc)
+ *tp = readconf_readtime(argv[++i], 0, FALSE);
+
+ if (*tp < 0)
+ exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
+ }
+ break;
- /* -oX <list>: Override local_interfaces and/or default daemon ports */
+ /* -oX <list>: Override local_interfaces and/or default daemon ports */
- else if (Ustrcmp(argrest, "X") == 0)
- override_local_interfaces = argv[++i];
+ case 'X':
+ if (*argrest) badarg = TRUE;
+ else override_local_interfaces = argv[++i];
+ break;
- /* Unknown -o argument */
+ /* Unknown -o argument */
- else badarg = TRUE;
+ default:
+ badarg = TRUE;
+ }
break;
/* -q[f][f][l][G<name>]: Run the queue, optionally forced, optionally local
only, optionally named, optionally starting from a given message id. */
- if (*argrest == 0 &&
- (i + 1 >= argc || argv[i+1][0] == '-' || mac_ismsgid(argv[i+1])))
- {
- queue_interval = 0;
- if (i+1 < argc && mac_ismsgid(argv[i+1]))
- start_queue_run_id = argv[++i];
- if (i+1 < argc && mac_ismsgid(argv[i+1]))
- stop_queue_run_id = argv[++i];
- }
+ if (!(list_queue || count_queue))
+ if (*argrest == 0
+ && (i + 1 >= argc || argv[i+1][0] == '-' || mac_ismsgid(argv[i+1])))
+ {
+ queue_interval = 0;
+ if (i+1 < argc && mac_ismsgid(argv[i+1]))
+ start_queue_run_id = argv[++i];
+ if (i+1 < argc && mac_ismsgid(argv[i+1]))
+ stop_queue_run_id = argv[++i];
+ }
/* -q[f][f][l][G<name>/]<n>: Run the queue at regular intervals, optionally
forced, optionally local only, optionally named. */
- else if ((queue_interval = readconf_readtime(*argrest ? argrest : argv[++i],
- 0, FALSE)) <= 0)
- exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
+ else if ((queue_interval = readconf_readtime(*argrest ? argrest : argv[++i],
+ 0, FALSE)) <= 0)
+ exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
break;
/* -tls-on-connect: don't wait for STARTTLS (for old clients) */
- #ifdef SUPPORT_TLS
+ #ifndef DISABLE_TLS
else if (Ustrcmp(argrest, "ls-on-connect") == 0) tls_in.on_connect = TRUE;
#endif
debug_file = stderr;
debug_fd = fileno(debug_file);
f.background_daemon = FALSE;
- if (f.running_in_test_harness) millisleep(100); /* lets caller finish */
+ testharness_pause_ms(100); /* lets caller finish */
if (debug_selector != D_v) /* -v only doesn't show this */
{
debug_printf("Exim version %s uid=%ld gid=%ld pid=%d D=%x\n",
in the call to exim_setugid().
However, if this process isn't running as root, setgroups() can't be used
-since you have to be root to run it, even if throwing away groups. Not being
-root here happens only in some unusual configurations. We just ignore the
-error. */
+since you have to be root to run it, even if throwing away groups.
+Except, sigh, for Hurd - where you can.
+Not being root here happens only in some unusual configurations. */
-if (setgroups(0, NULL) != 0 && setgroups(1, group_list) != 0 && !unprivileged)
+if ( !unprivileged
+#ifndef OS_SETGROUPS_ZERO_DROPS_ALL
+ && setgroups(0, NULL) != 0
+#endif
+ && setgroups(1, group_list) != 0)
exim_fail("exim: setgroups() failed: %s\n", strerror(errno));
/* If the configuration file name has been altered by an argument on the
issues (currently about tls_advertise_hosts and keep_environment not being
defined) */
-readconf_main(checking || list_options);
+ {
+#ifdef MEASURE_TIMING
+ struct timeval t0, diff;
+ (void)gettimeofday(&t0, NULL);
+#endif
+
+ readconf_main(checking || list_options);
+
+#ifdef MEASURE_TIMING
+ report_time_since(&t0, US"readconf_main (delta)");
+#endif
+ }
/* Now in directory "/" */
&& f.really_exim && !list_options && !checking)
{
uschar *p = big_buffer;
- Ustrcpy(p, "cwd= (failed)");
+ Ustrcpy(p, US"cwd= (failed)");
if (!initial_cwd)
p += 13;
uschar *quote;
if (p + len + 8 >= big_buffer + big_buffer_size)
{
- Ustrcpy(p, " ...");
+ Ustrcpy(p, US" ...");
log_write(0, LOG_MAIN, "%s", big_buffer);
- Ustrcpy(big_buffer, "...");
+ Ustrcpy(big_buffer, US"...");
p = big_buffer + 3;
}
printing = string_printing(argv[i]);
if (!f.admin_user)
{
BOOL debugset = (debug_selector & ~D_v) != 0;
- if (deliver_give_up || f.daemon_listen || malware_test_file ||
- (count_queue && queue_list_requires_admin) ||
- (list_queue && queue_list_requires_admin) ||
- (queue_interval >= 0 && prod_requires_admin) ||
- (debugset && !f.running_in_test_harness))
+ if ( deliver_give_up || f.daemon_listen || malware_test_file
+ || count_queue && queue_list_requires_admin
+ || list_queue && queue_list_requires_admin
+ || queue_interval >= 0 && prod_requires_admin
+ || queue_name_dest && prod_requires_admin
+ || debugset && !f.running_in_test_harness
+ )
exim_fail("exim:%s permission denied\n", debugset? " debugging" : "");
}
root. There will be further calls later for each message received. */
#ifdef LOAD_AVG_NEEDS_ROOT
-if (receiving_message &&
- (queue_only_load >= 0 ||
- (f.is_inetd && smtp_load_reserve >= 0)
- ))
- {
+if ( receiving_message
+ && (queue_only_load >= 0 || (f.is_inetd && smtp_load_reserve >= 0)))
load_average = OS_GETLOADAVG();
- }
#endif
/* The queue_only configuration option can be overridden by -odx on the command
if (count_queue)
{
set_process_info("counting the queue");
- queue_count();
+ fprintf(stdout, "%u\n", queue_count());
exit(EXIT_SUCCESS);
}
for (i = msg_action_arg; i < argc; i++)
if (!queue_action(argv[i], msg_action, NULL, 0, 0))
yield = EXIT_FAILURE;
+ switch (msg_action)
+ {
+ case MSG_REMOVE: case MSG_FREEZE: case MSG_THAW: break;
+ default: printf("\n"); break;
+ }
}
else if (!queue_action(argv[msg_action_arg], msg_action, argv, argc,
Now, since the intro of the ${acl } expansion, ACL definitions may be
needed in transports so we lost the optimisation. */
-readconf_rest();
+ {
+#ifdef MEASURE_TIMING
+ struct timeval t0, diff;
+ (void)gettimeofday(&t0, NULL);
+#endif
-/* The configuration data will have been read into POOL_PERM because we won't
-ever want to reset back past it. Change the current pool to POOL_MAIN. In fact,
-this is just a bit of pedantic tidiness. It wouldn't really matter if the
-configuration were read into POOL_MAIN, because we don't do any resets till
-later on. However, it seems right, and it does ensure that both pools get used.
-*/
+ readconf_rest();
-store_pool = POOL_MAIN;
+#ifdef MEASURE_TIMING
+ report_time_since(&t0, US"readconf_rest (delta)");
+#endif
+ }
/* Handle the -brt option. This is for checking out retry configurations.
The next three arguments are a domain name or a complete address, and
}
-/* Initialise subsystems as required */
-#ifndef DISABLE_DKIM
-dkim_exim_init();
-#endif
-deliver_init();
+/* Initialise subsystems as required. */
+tcp_init();
/* Handle a request to deliver one or more messages that are already on the
queue. Values of msg_action other than MSG_DELIVER and MSG_LOAD are dealt with
pid_t pid;
if (i == argc - 1)
(void)deliver_message(argv[i], forced_delivery, deliver_give_up);
- else if ((pid = fork()) == 0)
+ else if ((pid = exim_fork(US"cmdline-delivery")) == 0)
{
(void)deliver_message(argv[i], forced_delivery, deliver_give_up);
- _exit(EXIT_SUCCESS);
+ exim_underbar_exit(EXIT_SUCCESS, US"cmdline-delivery");
}
else if (pid < 0)
{
if (queue_interval == 0 && !f.daemon_listen)
{
DEBUG(D_queue_run) debug_printf("Single queue run%s%s%s%s\n",
- (start_queue_run_id == NULL)? US"" : US" starting at ",
- (start_queue_run_id == NULL)? US"" : start_queue_run_id,
- (stop_queue_run_id == NULL)? US"" : US" stopping at ",
- (stop_queue_run_id == NULL)? US"" : stop_queue_run_id);
+ start_queue_run_id ? US" starting at " : US"",
+ start_queue_run_id ? start_queue_run_id: US"",
+ stop_queue_run_id ? US" stopping at " : US"",
+ stop_queue_run_id ? stop_queue_run_id : US"");
if (*queue_name)
set_process_info("running the '%s' queue (single queue run)", queue_name);
else
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Daemon cannot be run when "
"mua_wrapper is set");
}
+
+# ifndef DISABLE_TLS
+ /* This also checks that the library linkage is working and we can call
+ routines in it, so call even if tls_require_ciphers is unset */
+ {
+# ifdef MEASURE_TIMING
+ struct timeval t0, diff;
+ (void)gettimeofday(&t0, NULL);
+# endif
+ if (!tls_dropprivs_validate_require_cipher(FALSE))
+ exit(1);
+# ifdef MEASURE_TIMING
+ report_time_since(&t0, US"validate_ciphers (delta)");
+# endif
+ }
+#endif
+
daemon_go();
}
the caller. This will get overwritten below for an inetd call. If a trusted
caller has set it empty, unset it. */
-if (sender_ident == NULL) sender_ident = originator_login;
- else if (sender_ident[0] == 0) sender_ident = NULL;
+if (!sender_ident) sender_ident = originator_login;
+else if (!*sender_ident) sender_ident = NULL;
/* Handle the -brw option, which is for checking out rewriting rules. Cause log
writes (on errors) to go to stderr instead. Can't do this earlier, as want the
unless a trusted caller supplies a sender address with -f, or is passing in the
message via SMTP (inetd invocation or otherwise). */
-if ((sender_address == NULL && !smtp_input) ||
- (!f.trusted_caller && filter_test == FTEST_NONE))
+if ( !sender_address && !smtp_input
+ || !f.trusted_caller && filter_test == FTEST_NONE)
{
f.sender_local = TRUE;
via -oMas and -oMai and if so, they will already be set. Otherwise, force
defaults except when host checking. */
- if (authenticated_sender == NULL && !host_checking)
+ if (!authenticated_sender && !host_checking)
authenticated_sender = string_sprintf("%s@%s", originator_login,
qualify_domain_sender);
- if (authenticated_id == NULL && !host_checking)
+ if (!authenticated_id && !host_checking)
authenticated_id = originator_login;
}
specify a sender address for SMTP input, we leave sender_address unset. This
causes the MAIL commands to be honoured. */
-if ((!smtp_input && sender_address == NULL) ||
- !receive_check_set_sender(sender_address))
+if ( !smtp_input && !sender_address
+ || !receive_check_set_sender(sender_address))
{
/* Either the caller is not permitted to set a general sender, or this is
non-SMTP input and the trusted caller has not set a sender. If there is no
address, which indicates an error message, or doesn't exist (root caller, smtp
interface, no -f argument). */
-if (sender_address != NULL && sender_address[0] != 0 &&
- sender_address_domain == 0)
+if (sender_address && *sender_address && sender_address_domain == 0)
sender_address = string_sprintf("%s@%s", local_part_quote(sender_address),
qualify_domain_sender);
{
while (recipients_arg < argc)
{
- uschar *s = argv[recipients_arg++];
- while (*s != 0)
+ /* Supplied addresses are tainted since they come from a user */
+ uschar * s = string_copy_taint(argv[recipients_arg++], TRUE);
+ while (*s)
{
BOOL finished = FALSE;
uschar *ss = parse_find_address_end(s, FALSE);
test_address(s, flags, &exit_value);
s = ss;
if (!finished)
- while (*(++s) != 0 && (*s == ',' || isspace(*s)));
+ while (*++s == ',' || isspace(*s)) ;
}
}
}
else for (;;)
{
- uschar *s = get_stdinput(NULL, NULL);
- if (s == NULL) break;
- test_address(s, flags, &exit_value);
+ uschar * s = get_stdinput(NULL, NULL);
+ if (!s) break;
+ test_address(string_copy_taint(s, TRUE), flags, &exit_value);
}
route_tidyup();
if (!sender_ident_set)
{
sender_ident = NULL;
- if (f.running_in_test_harness && sender_host_port != 0 &&
- interface_address != NULL && interface_port != 0)
- verify_get_ident(1413);
+ if (f.running_in_test_harness && sender_host_port
+ && interface_address && interface_port)
+ verify_get_ident(1223); /* note hardwired port number */
}
/* In case the given address is a non-canonical IPv6 address, canonicalize
it. The code works for both IPv4 and IPv6, as it happens. */
size = host_aton(sender_host_address, x);
- sender_host_address = store_get(48); /* large enough for full IPv6 */
+ sender_host_address = store_get(48, FALSE); /* large enough for full IPv6 */
(void)host_nmtoa(size, x, -1, sender_host_address, ':');
/* Now set up for testing */
if (smtp_start_session())
{
- for (reset_point = store_get(0); ; store_reset(reset_point))
+ for (; (reset_point = store_mark()); store_reset(reset_point))
{
if (smtp_setup_msg() <= 0) break;
if (!receive_msg(FALSE)) break;
/* Save the current store pool point, for resetting at the start of
each message, and save the real sender address, if any. */
-reset_point = store_get(0);
real_sender_address = sender_address;
/* Loop to receive messages; receive_msg() returns TRUE if there are more
while (more)
{
+ reset_point = store_mark();
message_id[0] = 0;
/* Handle the SMTP case; call smtp_setup_mst() to deal with the initial SMTP
raw_sender = string_copy(sender_address);
- /* Loop for each argument */
+ /* Loop for each argument (supplied by user hence tainted) */
for (int i = 0; i < count; i++)
{
int start, end, domain;
- uschar *errmess;
- uschar *s = list[i];
+ uschar * errmess;
+ uschar * s = string_copy_taint(list[i], TRUE);
/* Loop for each comma-separated address */
}
}
- receive_add_recipient(recipient, -1);
+ receive_add_recipient(string_copy_taint(recipient, TRUE), -1);
s = ss;
if (!finished)
while (*(++s) != 0 && (*s == ',' || isspace(*s)));
pid_t pid;
search_tidyup();
- if ((pid = fork()) == 0)
+ if ((pid = exim_fork(US"local-accept-delivery")) == 0)
{
int rc;
close_unwanted(); /* Close unwanted file descriptors and TLS */
rc = deliver_message(message_id, FALSE, FALSE);
search_tidyup();
- _exit((!mua_wrapper || rc == DELIVER_MUA_SUCCEEDED)?
- EXIT_SUCCESS : EXIT_FAILURE);
+ exim_underbar_exit(!mua_wrapper || rc == DELIVER_MUA_SUCCEEDED
+ ? EXIT_SUCCESS : EXIT_FAILURE, US"cmdline-delivery");
}
if (pid < 0)
projects / exim.git / blobdiff