#! PERL_COMMAND -w
-# $Cambridge: exim/src/src/exigrep.src,v 1.2 2004/12/21 11:28:38 ph10 Exp $
use strict;
-# Copyright (c) 2004 University of Cambridge.
+# Copyright (c) 2007-2015 University of Cambridge.
# See the file NOTICE for conditions of use and distribution.
# Except when they appear in comments, the following placeholders in this
# appears to be compressed, it is passed through zcat. We can't just do this
# for all files, because zcat chokes on non-compressed files.
+# Performance optimized in 02/02/2007 by Jori Hamalainen
+# Typical run time acceleration: 4 times
+
+
use Getopt::Std qw(getopts);
use POSIX qw(mktime);
sub seconds {
my($year,$month,$day,$hour,$min,$sec,$tzs,$tzh,$tzm) =
- $_[0] =~ /^(\d{4})-(\d\d)-(\d\d)\s(\d\d):(\d\d):(\d\d)(?>\s([+-])(\d\d)(\d\d))?/;
+ $_[0] =~ /^(\d{4})-(\d\d)-(\d\d)\s(\d\d):(\d\d):(\d\d)(?>\s([+-])(\d\d)(\d\d))?/o;
my $seconds = mktime $sec, $min, $hour, $day, $month - 1, $year - 1900;
# This subroutine processes a single line (in $_) from a log file. Program
# defensively against short lines finding their way into the log.
-my (%saved, %id_list, $pattern, $queue_time);
+my (%saved, %id_list, $pattern, $queue_time, $insensitive, $invert);
+
+# If using "related" option, have to track extra message IDs
+my $related;
+my $related_re='';
+my @Mids = ();
sub do_line {
+
+# Convert syslog lines to mainlog format, as in eximstats.
+
+if (!/^\d{4}-/o) { $_ =~ s/^.*? exim\b.*?: //o; }
+
return unless
- my($date,$entry) = /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d (?:[+-]\d{4} )?)(.*)/;
+ my($date,$id) = /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d (?:[+-]\d{4} )?)(?:\[\d+\] )?(\w{6}\-\w{6}\-\w{2})?/o;
# Handle the case when the log line belongs to a specific message. We save
# lines for specific messages until the message is complete. Then either print
-# discard.
+# or discard.
-if (my($id) = $entry =~ /^(\w{6}\-\w{6}\-\w{2})/)
+if (defined $id)
{
$saved{$id} = '' unless defined($saved{$id});
$saved{$id} .= $_;
- # Are we interested in this id ?
+ # Are we interested in this id ? Short circuit if we already were interested.
- $id_list{$id} = 1 if /$pattern/io;
+ if ($invert)
+ {
+ $id_list{$id} = 1 if (!defined($id_list{$id}));
+ $id_list{$id} = 0 if (($insensitive && /$pattern/io) || /$pattern/o);
+ }
+ else
+ {
+ if (defined $id_list{$id} ||
+ ($insensitive && /$pattern/io) || /$pattern/o)
+ {
+ $id_list{$id} = 1;
+ get_related_ids($id) if $related;
+ }
+ elsif ($related && $related_re)
+ {
+ grep_for_related($_, $id);
+ }
+ }
# See if this is a completion for some message. If it is interesting,
# print it, but in any event, throw away what was saved.
- if ($entry =~
- /(?:Completed|rejected (?:by local_scan|by non-SMTP ACL|after DATA))/)
+ if (index($_, 'Completed') != -1 ||
+ index($_, 'SMTP data timeout') != -1 ||
+ (index($_, 'rejected') != -1 &&
+ /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d (?:[+-]\d{4} )?)(?:\[\d+\] )?\w{6}\-\w{6}\-\w{2} rejected/o))
{
- if ($saved{$id} =~ /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d ([+-]\d{4} )?)(\w{6}\-\w{6}\-\w{2})/)
+ if ($queue_time != -1 &&
+ $saved{$id} =~ /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d ([+-]\d{4} )?)/o)
{
my $old_sec = &seconds($1);
my $sec = &seconds($date);
- delete $id_list{$id} if $id_list{$id} && $sec - $old_sec <= $queue_time;
- }
-
- if ($id_list{$id})
- {
- delete $id_list{$id};
- print "$saved{$id}\n";
+ $id_list{$id} = 0 if $id_list{$id} && $sec - $old_sec <= $queue_time;
}
+ print "$saved{$id}\n" if ($id_list{$id});
+ delete $id_list{$id};
delete $saved{$id};
}
}
# Handle the case where the log line does not belong to a specific message.
# Print it if it is interesting.
-elsif ($entry =~ /$pattern/io) { print "$_\n"; }
+elsif ( ($invert && (($insensitive && !/$pattern/io) || !/$pattern/o)) ||
+ (!$invert && (($insensitive && /$pattern/io) || /$pattern/o)) )
+ { print "$_\n"; }
}
+# Rotated log files are frequently compressed and there are a variety of
+# formats it could be compressed with. Rather than use just one that is
+# detected and hardcoded at Exim compile time, detect and use what the
+# logfile is compressed with on the fly.
+#
+# List of known compression extensions and their associated commands:
+my $compressors = {
+ gz => { cmd => 'zcat', args => '' },
+ bz2 => { cmd => 'bzcat', args => '' },
+ xz => { cmd => 'xzcat', args => '' },
+ lzma => { cmd => 'lzma', args => '-dc' }
+};
+my $csearch = 0;
+
+sub detect_compressor_bin
+ {
+ my $ext = shift();
+ my $c = $compressors->{$ext}->{cmd};
+ $compressors->{$ext}->{bin} = `which $c 2>/dev/null`;
+ chomp($compressors->{$ext}->{bin});
+ }
+
+sub detect_compressor_capable
+ {
+ my $filename = shift();
+ map { &detect_compressor_bin($_) } keys %$compressors
+ if (!$csearch);
+ $csearch = 1;
+ return undef
+ unless (grep {$filename =~ /\.(?:$_)$/} keys %$compressors);
+ # Loop through them, figure out which one it detected,
+ # and build the commandline.
+ my $cmdline = undef;
+ foreach my $ext (keys %$compressors)
+ {
+ if ($filename =~ /\.(?:$ext)$/)
+ {
+ # Just die if compressor not found; if this occurrs in the middle of
+ # two valid files with a lot of matches, error could easily be missed.
+ die("Didn't find $ext decompressor for $filename\n")
+ if ($compressors->{$ext}->{bin} eq '');
+ $cmdline = $compressors->{$ext}->{bin} ." ".
+ $compressors->{$ext}->{args};
+ last;
+ }
+ }
+ return $cmdline;
+ }
+
+sub grep_for_related {
+ my ($line,$id) = @_;
+ $id_list{$id} = 1 if $line =~ m/$related_re/;
+}
+
+sub get_related_ids {
+ my ($id) = @_;
+ push @Mids, $id unless grep /\b$id\b/, @Mids;
+ my $re = join '|', @Mids;
+ $related_re = qr/$re/;
+}
# The main program. Extract the pattern and make sure any relevant characters
# are quoted if the -l flag is given. The -t flag gives a time-on-queue value
-# which is an additional condition.
+# which is an additional condition. The -M flag will also display "related"
+# loglines (msgid from matched lines is searched in following lines).
-getopts('lt:',\my %args);
-$queue_time = $args{'t'}? $args{'t'} : -1;
+getopts('Ilvt:M',\my %args);
+$queue_time = $args{'t'}? $args{'t'} : -1;
+$insensitive = $args{'I'}? 0 : 1;
+$invert = $args{'v'}? 1 : 0;
+$related = $args{'M'}? 1 : 0;
-die "usage: exigrep [-
l] [-t <seconds>] <pattern> [<log file>]...\n"
+die "usage: exigrep [-
I] [-l] [-M] [-t <seconds>] [-v] <pattern> [<log file>]...\n"
if ($#ARGV < 0);
$pattern = shift @ARGV;
foreach (@ARGV)
{
my $filename = $_;
- if ($filename =~ /\.(?:COMPRESS_SUFFIX)$/)
+ if (-x 'ZCAT_COMMAND' && $filename =~ /\.(?:COMPRESS_SUFFIX)$/o)
{
open(LOG, "ZCAT_COMMAND $filename |") ||
die "Unable to zcat $filename: $!\n";
}
+ elsif (my $cmdline = &detect_compressor_capable($filename))
+ {
+ open(LOG, "$cmdline $filename |") ||
+ die "Unable to decompress $filename: $!\n";
+ }
else
{
open(LOG, "<$filename") || die "Unable to open $filename: $!\n";
else { do_line() while (<STDIN>); }
-# At the end of processing all the input, print any uncompleted data
+# At the end of processing all the input, print any uncompleted messages.
-for (keys %id_list) { print "+++ $_ not completed +++\n$saved{$_}\n;" }
+for (keys %id_list)
+ {
+ print "+++ $_ has not completed +++\n$saved{$_}\n";
+ }
# End of exigrep
projects / exim.git / blobdiff