* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2017 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
/* The main code for delivering a message. */
s = string_append(s, 2, US" CV=",
testflag(addr, af_cert_verified)
?
-#ifdef EXPERIMENTAL_DANE
+#ifdef SUPPORT_DANE
testflag(addr, af_dane_verified)
? "dane"
:
if (!(s = expand_string(action)) && *expand_string_message)
log_write(0, LOG_MAIN|LOG_PANIC,
"failed to expand event_action %s in %s: %s\n",
- event, transport_name, expand_string_message);
+ event, transport_name ? transport_name : US"main", expand_string_message);
event_name = event_data = NULL;
const uschar * save_address = deliver_host_address;
const int save_port = deliver_host_port;
-if (!addr->transport)
- return;
-
router_name = addr->router ? addr->router->name : NULL;
-transport_name = addr->transport->name;
deliver_domain = addr->domain;
deliver_localpart = addr->local_part;
deliver_host = addr->host_used ? addr->host_used->name : NULL;
-(void) event_raise(addr->transport->event_action, event,
- addr->host_used
- || Ustrcmp(addr->transport->driver_name, "smtp") == 0
- || Ustrcmp(addr->transport->driver_name, "lmtp") == 0
- ? addr->message : NULL);
+if (!addr->transport)
+ {
+ if (Ustrcmp(event, "msg:fail:delivery") == 0)
+ {
+ /* An address failed with no transport involved. This happens when
+ a filter was used which triggered a fail command (in such a case
+ a transport isn't needed). Convert it to an internal fail event. */
+
+ (void) event_raise(event_action, US"msg:fail:internal", addr->message);
+ }
+ }
+else
+ {
+ transport_name = addr->transport->name;
+
+ (void) event_raise(addr->transport->event_action, event,
+ addr->host_used
+ || Ustrcmp(addr->transport->driver_name, "smtp") == 0
+ || Ustrcmp(addr->transport->driver_name, "lmtp") == 0
+ || Ustrcmp(addr->transport->driver_name, "autoreply") == 0
+ ? addr->message : NULL);
+ }
deliver_host_port = save_port;
deliver_host_address = save_address;
if (diff->tv_sec >= 5 || !LOGGING(millisec))
return readconf_printtime((int)diff->tv_sec);
-sprintf(CS buf, "%d.%03ds", (int)diff->tv_sec, (int)diff->tv_usec/1000);
+sprintf(CS buf, "%u.%03us", (uint)diff->tv_sec, (uint)diff->tv_usec/1000);
return buf;
}
}
}
+ if (LOGGING(pipelining) && testflag(addr, af_pipelining))
+ g = string_catn(g, US" L", 2);
+
#ifndef DISABLE_PRDR
if (testflag(addr, af_prdr_used))
g = string_catn(g, US" PRDR", 5);
/* Log the deferment in the message log, but don't clutter it
up with retry-time defers after the first delivery attempt. */
-if (deliver_firsttime || addr->basic_errno > ERRNO_RETRY_BASE)
+if (f.deliver_firsttime || addr->basic_errno > ERRNO_RETRY_BASE)
deliver_msglog("%s %s\n", now, g->s);
/* Write the main log and reset the store.
void * reset_point;
gstring * g = reset_point = string_get(256);
+#ifndef DISABLE_EVENT
+/* Message failures for which we will send a DSN get their event raised
+later so avoid doing it here. */
+
+if ( !addr->prop.ignore_error
+ && !(addr->dsn_flags & (rf_dsnflags & ~rf_notify_failure))
+ )
+ msg_event_raise(US"msg:fail:delivery", addr);
+#endif
+
/* Build up the log line for the message and main logs */
/* Create the address string for logging. Must not do this earlier, because
log_write(0, LOG_MAIN, "** %s", g->s);
-#ifndef DISABLE_EVENT
-msg_event_raise(US"msg:fail:delivery", addr);
-#endif
-
store_reset(reset_point);
return;
}
{
driver_name = addr->transport->name;
driver_kind = US" transport";
- disable_logging = addr->transport->disable_logging;
+ f.disable_logging = addr->transport->disable_logging;
}
else driver_kind = US"transporting";
}
{
driver_name = addr->router->name;
driver_kind = US" router";
- disable_logging = addr->router->disable_logging;
+ f.disable_logging = addr->router->disable_logging;
}
else driver_kind = US"routing";
}
log_write(0, LOG_MAIN, "<%s>: %s transport output: %s",
addr->address, tb->name, sp);
}
- (void)fclose(f);
+ (void)fclose(f);
}
/* Handle returning options, but only if there is an address to return
tls_out.cipher = addr->cipher;
tls_out.peerdn = addr->peerdn;
tls_out.ocsp = addr->ocsp;
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
tls_out.dane_verified = testflag(addr, af_dane_verified);
# endif
#endif
tls_out.cipher = NULL;
tls_out.peerdn = NULL;
tls_out.ocsp = OCSP_NOT_REQ;
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
tls_out.dane_verified = FALSE;
# endif
#endif
if (addr->special_action == SPECIAL_FREEZE)
{
- deliver_freeze = TRUE;
+ f.deliver_freeze = TRUE;
deliver_frozen_at = time(NULL);
update_spool = TRUE;
}
/* If doing a 2-stage queue run, we skip writing to either the message
log or the main log for SMTP defers. */
- if (!queue_2stage || addr->basic_errno != 0)
+ if (!f.queue_2stage || addr->basic_errno != 0)
deferral_log(addr, now, logflags, driver_name, driver_kind);
}
{
frozen_info = addr->special_action == SPECIAL_FREEZE
? US""
- : sender_local && !local_error_message
+ : f.sender_local && !f.local_error_message
? US" (message created with -f <>)"
: US" (delivery error message)";
- deliver_freeze = TRUE;
+ f.deliver_freeze = TRUE;
deliver_frozen_at = time(NULL);
update_spool = TRUE;
/* Ensure logging is turned on again in all cases */
-disable_logging = FALSE;
+f.disable_logging = FALSE;
}
uschar *new_return_path = expand_string(tp->return_path);
if (!new_return_path)
{
- if (!expand_string_forcedfail)
+ if (!f.expand_string_forcedfail)
{
common_error(TRUE, addr, ERRNO_EXPANDFAIL,
US"Failed to expand return path \"%s\" in %s transport: %s",
/* In the test harness, wait just a bit to let the subprocess finish off
any debug output etc first. */
- if (running_in_test_harness) millisleep(300);
+ if (f.running_in_test_harness) millisleep(300);
DEBUG(D_deliver) debug_printf("journalling %s", big_buffer);
len = Ustrlen(big_buffer);
struct timeval deliver_time;
address_item *addr2, *addr3, *nextaddr;
int logflags = LOG_MAIN;
- int logchar = dont_deliver? '*' : '=';
+ int logchar = f.dont_deliver? '*' : '=';
transport_instance *tp;
uschar * serialize_key = NULL;
if (!(tp = addr->transport))
{
logflags |= LOG_PANIC;
- disable_logging = FALSE; /* Jic */
+ f.disable_logging = FALSE; /* Jic */
addr->message = addr->router
? string_sprintf("No transport set by %s router", addr->router->name)
: string_sprintf("No transport set by system filter");
/* There are weird cases where logging is disabled */
- disable_logging = tp->disable_logging;
+ f.disable_logging = tp->disable_logging;
/* Check for batched addresses and possible amalgamation. Skip all the work
if either batch_max <= 1 or there aren't any other addresses for local
retry_record->expired);
}
- if (queue_running && !deliver_force)
+ if (f.queue_running && !f.deliver_force)
{
ok = (now - retry_record->time_stamp > retry_data_expire)
|| (now >= retry_record->next_try)
often bigger) so even if we are reading while the subprocess is still going, we
should never have only a partial item in the buffer.
-hs12: This assumption is not true anymore, since we got quit large items (certificate
-information and such)
+hs12: This assumption is not true anymore, since we get quite large items (certificate
+information and such).
Argument:
poffset the offset of the parlist item
break;
#endif
+ case 'L':
+ switch (*subid)
+ {
+ case 1: setflag(addr, af_pipelining); break;
+ }
+ break;
+
case 'K':
setflag(addr, af_chunking_used);
break;
if (!(tp = addr->transport))
{
- disable_logging = FALSE; /* Jic */
+ f.disable_logging = FALSE; /* Jic */
panicmsg = US"No transport set by router";
goto panic_continue;
}
uschar *new_return_path = expand_string(tp->return_path);
if (new_return_path)
return_path = new_return_path;
- else if (!expand_string_forcedfail)
+ else if (!f.expand_string_forcedfail)
{
panicmsg = string_sprintf("Failed to expand return path \"%s\": %s",
tp->return_path, expand_string_message);
treat it as if it is a continued connection (apart from the counter used
for the log line mark). */
- if (cutthrough.fd >= 0 && cutthrough.callout_hold_only)
+ if (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only)
{
DEBUG(D_deliver)
debug_printf("lazy-callout-close: have conn still open from verification\n");
we must check that the continue host is on the list. Otherwise, the
host is set in the transport. */
- continue_more = FALSE; /* In case got set for the last lot */
+ f.continue_more = FALSE; /* In case got set for the last lot */
if (continue_transport)
{
BOOL ok = Ustrcmp(continue_transport, tp->name) == 0;
connected to is too hard to manage. Perhaps we need a finer-grain
interface to the transport. */
- for (next = addr_remote; next && !continue_more; next = next->next)
+ for (next = addr_remote; next && !f.continue_more; next = next->next)
{
host_item *h;
for (h = next->host_list; h; h = h->next)
if (Ustrcmp(h->name, continue_hostname) == 0)
- { continue_more = TRUE; break; }
+ { f.continue_more = TRUE; break; }
}
}
search_tidyup();
-
if ((pid = fork()) == 0)
{
int fd = pfd[pipe_write];
host_item *h;
- DEBUG(D_deliver) debug_selector |= D_pid; // hs12
/* Setting this global in the subprocess means we need never clear it */
transport_name = tp->name;
/* There are weird circumstances in which logging is disabled */
- disable_logging = tp->disable_logging;
+ f.disable_logging = tp->disable_logging;
/* Show pids on debug output if parallelism possible */
predictable settings for each delivery process, so do something explicit
here rather they rely on the fixed reset in the random number function. */
- random_seed = running_in_test_harness ? 42 + 2*delivery_count : 0;
+ random_seed = f.running_in_test_harness ? 42 + 2*delivery_count : 0;
/* Set close-on-exec on the pipe so that it doesn't get passed on to
a new process that may be forked to do another delivery down the same
/* The certificate verification status goes into the flags */
if (tls_out.certificate_verified) setflag(addr, af_cert_verified);
-#ifdef EXPERIMENTAL_DANE
+#ifdef SUPPORT_DANE
if (tls_out.dane_verified) setflag(addr, af_dane_verified);
#endif
rmt_dlv_checked_write(fd, 'P', '0', NULL, 0);
#endif
+ if (testflag(addr, af_pipelining))
+ rmt_dlv_checked_write(fd, 'L', '1', NULL, 0);
+
if (testflag(addr, af_chunking_used))
rmt_dlv_checked_write(fd, 'K', '0', NULL, 0);
release its TLS library context (if any) as responsibility was passed to
the delivery child process. */
- if (cutthrough.fd >= 0 && cutthrough.callout_hold_only)
+ if (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only)
{
#ifdef SUPPORT_TLS
- tls_close(FALSE, FALSE);
+ if (cutthrough.is_tls)
+ tls_close(cutthrough.cctx.tls_ctx, TLS_NO_SHUTDOWN);
#endif
- (void) close(cutthrough.fd);
+ (void) close(cutthrough.cctx.sock);
release_cutthrough_connection(US"passed to transport proc");
}
newly created process get going before we create another process. This should
ensure repeatability in the tests. We only need to wait a tad. */
- else if (running_in_test_harness) millisleep(500);
+ else if (f.running_in_test_harness) millisleep(500);
continue;
it is obtained from a command line (the -M or -q options), and otherwise it is
known to be a valid message id. */
-Ustrcpy(message_id, id);
-deliver_force = forced;
+if (id != message_id)
+ Ustrcpy(message_id, id);
+f.deliver_force = forced;
return_count = 0;
message_size = 0;
can happen, but in the default situation, unless forced, no delivery is
attempted. */
-if (deliver_freeze)
+if (f.deliver_freeze)
{
#ifdef SUPPORT_MOVE_FROZEN_MESSAGES
/* Moving to another directory removes the message from Exim's view. Other
|| auto_thaw <= 0
|| now <= deliver_frozen_at + auto_thaw
)
- && ( !forced || !deliver_force_thaw
- || !admin_user || continue_hostname
+ && ( !forced || !f.deliver_force_thaw
+ || !f.admin_user || continue_hostname
) )
{
(void)close(deliver_datafile);
if (forced)
{
- deliver_manual_thaw = TRUE;
+ f.deliver_manual_thaw = TRUE;
log_write(0, LOG_MAIN, "Unfrozen by forced delivery");
}
else log_write(0, LOG_MAIN, "Unfrozen by auto-thaw");
/* We get here if any of the rules for unfreezing have triggered. */
- deliver_freeze = FALSE;
+ f.deliver_freeze = FALSE;
update_spool = TRUE;
}
}
return_path = sender_address;
- enable_dollar_recipients = TRUE; /* Permit $recipients in system filter */
- system_filtering = TRUE;
+ f.enable_dollar_recipients = TRUE; /* Permit $recipients in system filter */
+ f.system_filtering = TRUE;
/* Any error in the filter file causes a delivery to be abandoned. */
/* Reset things. If the filter message is an empty string, which can happen
for a filter "fail" or "freeze" command with no text, reset it to NULL. */
- system_filtering = FALSE;
- enable_dollar_recipients = FALSE;
+ f.system_filtering = FALSE;
+ f.enable_dollar_recipients = FALSE;
if (filter_message && filter_message[0] == 0) filter_message = NULL;
/* Save the values of the system filter variables so that user filters
unset "delivered", which is forced by the "freeze" command to make -bF
work properly. */
- else if (rc == FF_FREEZE && !deliver_manual_thaw)
+ else if (rc == FF_FREEZE && !f.deliver_manual_thaw)
{
- deliver_freeze = TRUE;
+ f.deliver_freeze = TRUE;
deliver_frozen_at = time(NULL);
process_recipients = RECIP_DEFER;
frozen_info = string_sprintf(" by the system filter%s%s",
/* RECIP_DEFER is set when a system filter freezes a message. */
case RECIP_DEFER:
- new->next = addr_defer;
- addr_defer = new;
- break;
+ new->next = addr_defer;
+ addr_defer = new;
+ break;
/* RECIP_FAIL_FILTER is set when a system filter has obeyed a "fail"
command. */
case RECIP_FAIL_FILTER:
- new->message =
- filter_message ? filter_message : US"delivery cancelled";
- setflag(new, af_pass_message);
- goto RECIP_QUEUE_FAILED; /* below */
+ new->message =
+ filter_message ? filter_message : US"delivery cancelled";
+ setflag(new, af_pass_message);
+ goto RECIP_QUEUE_FAILED; /* below */
/* RECIP_FAIL_TIMEOUT is set when a message is frozen, but is older
been logged. */
case RECIP_FAIL_TIMEOUT:
- new->message = US"delivery cancelled; message timed out";
- goto RECIP_QUEUE_FAILED; /* below */
+ new->message = US"delivery cancelled; message timed out";
+ goto RECIP_QUEUE_FAILED; /* below */
/* RECIP_FAIL is set when -Mg has been used. */
case RECIP_FAIL:
- new->message = US"delivery cancelled by administrator";
- /* Fall through */
+ new->message = US"delivery cancelled by administrator";
+ /* Fall through */
/* Common code for the failure cases above. If this is not a bounce
message, put the address on the failed list so that it is used to
The incident has already been logged. */
RECIP_QUEUE_FAILED:
- if (sender_address[0] != 0)
- {
- new->next = addr_failed;
- addr_failed = new;
- }
+ if (sender_address[0])
+ {
+ new->next = addr_failed;
+ addr_failed = new;
+ }
break;
is a bounce message, it will get frozen. */
case RECIP_FAIL_LOOP:
- new->message = US"Too many \"Received\" headers - suspected mail loop";
- post_process_one(new, FAIL, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
- break;
+ new->message = US"Too many \"Received\" headers - suspected mail loop";
+ post_process_one(new, FAIL, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
+ break;
/* Value should be RECIP_ACCEPT; take this as the safe default. */
default:
- if (!addr_new) addr_new = new; else addr_last->next = new;
- addr_last = new;
- break;
+ if (!addr_new) addr_new = new; else addr_last->next = new;
+ addr_last = new;
+ break;
}
#ifndef DISABLE_EVENT
{
uschar * save_local = deliver_localpart;
const uschar * save_domain = deliver_domain;
+ uschar * addr = new->address, * errmsg = NULL;
+ int start, end, dom;
- deliver_localpart = expand_string(
- string_sprintf("${local_part:%s}", new->address));
- deliver_domain = expand_string(
- string_sprintf("${domain:%s}", new->address));
+ if (!parse_extract_address(addr, &errmsg, &start, &end, &dom, TRUE))
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "failed to parse address '%.100s': %s\n", addr, errmsg);
+ else
+ {
+ deliver_localpart =
+ string_copyn(addr+start, dom ? (dom-1) - start : end - start);
+ deliver_domain = dom ? CUS string_copyn(addr+dom, end - dom) : CUS"";
- (void) event_raise(event_action,
- US"msg:fail:internal", new->message);
+ event_raise(event_action, US"msg:fail:internal", new->message);
- deliver_localpart = save_local;
- deliver_domain = save_domain;
+ deliver_localpart = save_local;
+ deliver_domain = save_domain;
+ }
}
#endif
}
. If new addresses have been generated by the routers, da capo.
*/
-header_rewritten = FALSE; /* No headers rewritten yet */
+f.header_rewritten = FALSE; /* No headers rewritten yet */
while (addr_new) /* Loop until all addresses dealt with */
{
address_item *addr, *parent;
which keep the retry record fresh, which can lead to us perpetually
deferring messages. */
- else if ( ( queue_running && !deliver_force
+ else if ( ( f.queue_running && !f.deliver_force
|| continue_hostname
)
&& ( ( domain_retry_record
those domains. During queue runs, queue_domains is forced to be unset.
Optimize by skipping this pass through the addresses if nothing is set. */
- if (!deliver_force && queue_domains)
+ if (!f.deliver_force && queue_domains)
{
address_item *okaddr = NULL;
while (addr_route)
there is only address to be delivered - if it succeeds the spool write need not
happen. */
-if ( header_rewritten
+if ( f.header_rewritten
&& ( addr_local && (addr_local->next || addr_remote)
|| addr_remote && addr_remote->next
) )
{
/* Panic-dies on error */
(void)spool_write_header(message_id, SW_DELIVERING, NULL);
- header_rewritten = FALSE;
+ f.header_rewritten = FALSE;
}
DEBUG(D_deliver|D_transport)
debug_printf(">>>>>>>>>>>>>>>> Local deliveries >>>>>>>>>>>>>>>>\n");
do_local_deliveries();
- disable_logging = FALSE;
+ f.disable_logging = FALSE;
}
/* If queue_run_local is set, we do not want to attempt any remote deliveries,
so just queue them all. */
-if (queue_run_local)
+if (f.queue_run_local)
while (addr_remote)
{
address_item *addr = addr_remote;
if (remote_sort_domains) sort_remote_deliveries();
do_remote_deliveries(TRUE);
}
- disable_logging = FALSE;
+ f.disable_logging = FALSE;
}
updating of the database if the -N flag is set, which is a debugging thing that
prevents actual delivery. */
-else if (!dont_deliver)
+else if (!f.dont_deliver)
retry_update(&addr_defer, &addr_failed, &addr_succeed);
/* Send DSN for successful messages if requested */
if ( ( addr_dsntmp->dsn_aware != dsn_support_yes
|| addr_dsntmp->dsn_flags & rf_dsnlasthop
)
- && addr_dsntmp->dsn_flags & rf_dsnflags
&& addr_dsntmp->dsn_flags & rf_notify_success
)
{
addr_dsntmp = addr_dsntmp->next)
fprintf(f, "<%s> (relayed %s)\n\n",
addr_dsntmp->address,
- (addr_dsntmp->dsn_flags & rf_dsnlasthop) == 1
- ? "via non DSN router"
- : addr_dsntmp->dsn_aware == dsn_support_no
- ? "to non-DSN-aware mailer"
- : "via non \"Remote SMTP\" router"
+ addr_dsntmp->dsn_flags & rf_dsnlasthop ? "via non DSN router"
+ : addr_dsntmp->dsn_aware == dsn_support_no ? "to non-DSN-aware mailer"
+ : "via non \"Remote SMTP\" router"
);
fprintf(f, "--%s\n"
addr_dsntmp->host_used->name);
else
fprintf(f, "Diagnostic-Code: X-Exim; relayed via non %s router\n\n",
- (addr_dsntmp->dsn_flags & rf_dsnlasthop) == 1 ? "DSN" : "SMTP");
+ addr_dsntmp->dsn_flags & rf_dsnlasthop ? "DSN" : "SMTP");
}
fprintf(f, "--%s\nContent-type: text/rfc822-headers\n\n", bound);
/* There are weird cases when logging is disabled in the transport. However,
there may not be a transport (address failed by a router). */
- disable_logging = FALSE;
+ f.disable_logging = FALSE;
if (addr_failed->transport)
- disable_logging = addr_failed->transport->disable_logging;
+ f.disable_logging = addr_failed->transport->disable_logging;
DEBUG(D_deliver)
debug_printf("processing failed address %s\n", addr_failed->address);
mark the recipient done. */
if ( addr_failed->prop.ignore_error
- || ( addr_failed->dsn_flags & rf_dsnflags
- && (addr_failed->dsn_flags & rf_notify_failure) != rf_notify_failure
- ) )
+ || addr_failed->dsn_flags & (rf_dsnflags & ~rf_notify_failure)
+ )
{
addr = addr_failed;
addr_failed = addr->next;
if (addr->return_filename) Uunlink(addr->return_filename);
+#ifndef DISABLE_EVENT
+ msg_event_raise(US"msg:fail:delivery", addr);
+#endif
log_write(0, LOG_MAIN, "%s%s%s%s: error ignored",
addr->address,
!addr->parent ? US"" : US" <",
int filecount = 0;
int rcount = 0;
uschar *bcc, *emf_text;
- FILE *f = fdopen(fd, "wb");
- FILE *emf = NULL;
+ FILE * fp = fdopen(fd, "wb");
+ FILE * emf = NULL;
BOOL to_sender = strcmpic(sender_address, bounce_recipient) == 0;
int max = (bounce_return_size_limit/DELIVER_IN_BUFFER_SIZE + 1) *
DELIVER_IN_BUFFER_SIZE;
if (testflag(addr, af_hide_child)) continue;
if (rcount >= 50)
{
- fprintf(f, "\n");
+ fprintf(fp, "\n");
rcount = 0;
}
- fprintf(f, "%s%s",
+ fprintf(fp, "%s%s",
rcount++ == 0
? "X-Failed-Recipients: "
: ",\n ",
? string_printing(addr->parent->address)
: string_printing(addr->address));
}
- if (rcount > 0) fprintf(f, "\n");
+ if (rcount > 0) fprintf(fp, "\n");
/* Output the standard headers */
if (errors_reply_to)
- fprintf(f, "Reply-To: %s\n", errors_reply_to);
- fprintf(f, "Auto-Submitted: auto-replied\n");
- moan_write_from(f);
- fprintf(f, "To: %s\n", bounce_recipient);
+ fprintf(fp, "Reply-To: %s\n", errors_reply_to);
+ fprintf(fp, "Auto-Submitted: auto-replied\n");
+ moan_write_from(fp);
+ fprintf(fp, "To: %s\n", bounce_recipient);
/* generate boundary string and output MIME-Headers */
bound = string_sprintf(TIME_T_FMT "-eximdsn-%d", time(NULL), rand());
- fprintf(f, "Content-Type: multipart/report;"
+ fprintf(fp, "Content-Type: multipart/report;"
" report-type=delivery-status; boundary=%s\n"
"MIME-Version: 1.0\n",
bound);
/* Quietly copy to configured additional addresses if required. */
if ((bcc = moan_check_errorcopy(bounce_recipient)))
- fprintf(f, "Bcc: %s\n", bcc);
+ fprintf(fp, "Bcc: %s\n", bcc);
/* The texts for the message can be read from a template file; if there
isn't one, or if it is too short, built-in texts are used. The first
emf text is a Subject: and any other headers. */
if ((emf_text = next_emf(emf, US"header")))
- fprintf(f, "%s\n", emf_text);
+ fprintf(fp, "%s\n", emf_text);
else
- fprintf(f, "Subject: Mail delivery failed%s\n\n",
+ fprintf(fp, "Subject: Mail delivery failed%s\n\n",
to_sender? ": returning message to sender" : "");
/* output human readable part as text/plain section */
- fprintf(f, "--%s\n"
+ fprintf(fp, "--%s\n"
"Content-type: text/plain; charset=us-ascii\n\n",
bound);
if ((emf_text = next_emf(emf, US"intro")))
- fprintf(f, "%s", CS emf_text);
+ fprintf(fp, "%s", CS emf_text);
else
{
- fprintf(f,
+ fprintf(fp,
/* This message has been reworded several times. It seems to be confusing to
somebody, however it is worded. I have retreated to the original, simple
wording. */
"This message was created automatically by mail delivery software.\n");
if (bounce_message_text)
- fprintf(f, "%s", CS bounce_message_text);
+ fprintf(fp, "%s", CS bounce_message_text);
if (to_sender)
- fprintf(f,
+ fprintf(fp,
"\nA message that you sent could not be delivered to one or more of its\n"
"recipients. This is a permanent error. The following address(es) failed:\n");
else
- fprintf(f,
+ fprintf(fp,
"\nA message sent by\n\n <%s>\n\n"
"could not be delivered to one or more of its recipients. The following\n"
"address(es) failed:\n", sender_address);
}
- fputc('\n', f);
+ fputc('\n', fp);
/* Process the addresses, leaving them on the msgchain if they have a
file name for a return message. (There has already been a check in
paddr = &msgchain;
for (addr = msgchain; addr; addr = *paddr)
{
- if (print_address_information(addr, f, US" ", US"\n ", US""))
- print_address_error(addr, f, US"");
+ if (print_address_information(addr, fp, US" ", US"\n ", US""))
+ print_address_error(addr, fp, US"");
/* End the final line for the address */
- fputc('\n', f);
+ fputc('\n', fp);
/* Leave on msgchain if there's a return file. */
}
}
- fputc('\n', f);
+ fputc('\n', fp);
/* Get the next text, whether we need it or not, so as to be
positioned for the one after. */
address_item *nextaddr;
if (emf_text)
- fprintf(f, "%s", CS emf_text);
+ fprintf(fp, "%s", CS emf_text);
else
- fprintf(f,
+ fprintf(fp,
"The following text was generated during the delivery "
"attempt%s:\n", (filecount > 1)? "s" : "");
/* List all the addresses that relate to this file */
- fputc('\n', f);
+ fputc('\n', fp);
while(addr) /* Insurance */
{
- print_address_information(addr, f, US"------ ", US"\n ",
+ print_address_information(addr, fp, US"------ ", US"\n ",
US" ------\n");
if (addr->return_filename) break;
addr = addr->next;
}
- fputc('\n', f);
+ fputc('\n', fp);
/* Now copy the file */
if (!(fm = Ufopen(addr->return_filename, "rb")))
- fprintf(f, " +++ Exim error... failed to open text file: %s\n",
+ fprintf(fp, " +++ Exim error... failed to open text file: %s\n",
strerror(errno));
else
{
- while ((ch = fgetc(fm)) != EOF) fputc(ch, f);
+ while ((ch = fgetc(fm)) != EOF) fputc(ch, fp);
(void)fclose(fm);
}
Uunlink(addr->return_filename);
addr->next = handled_addr;
handled_addr = topaddr;
}
- fputc('\n', f);
+ fputc('\n', fp);
}
/* output machine readable part */
#ifdef SUPPORT_I18N
if (message_smtputf8)
- fprintf(f, "--%s\n"
+ fprintf(fp, "--%s\n"
"Content-type: message/global-delivery-status\n\n"
"Reporting-MTA: dns; %s\n",
bound, smtp_active_hostname);
else
#endif
- fprintf(f, "--%s\n"
+ fprintf(fp, "--%s\n"
"Content-type: message/delivery-status\n\n"
"Reporting-MTA: dns; %s\n",
bound, smtp_active_hostname);
/* must be decoded from xtext: see RFC 3461:6.3a */
uschar *xdec_envid;
if (auth_xtextdecode(dsn_envid, &xdec_envid) > 0)
- fprintf(f, "Original-Envelope-ID: %s\n", dsn_envid);
+ fprintf(fp, "Original-Envelope-ID: %s\n", dsn_envid);
else
- fprintf(f, "X-Original-Envelope-ID: error decoding xtext formatted ENVID\n");
+ fprintf(fp, "X-Original-Envelope-ID: error decoding xtext formatted ENVID\n");
}
- fputc('\n', f);
+ fputc('\n', fp);
for (addr = handled_addr; addr; addr = addr->next)
{
host_item * hu;
- fprintf(f, "Action: failed\n"
+ fprintf(fp, "Action: failed\n"
"Final-Recipient: rfc822;%s\n"
"Status: 5.0.0\n",
addr->address);
if ((hu = addr->host_used) && hu->name)
{
- const uschar * s;
- fprintf(f, "Remote-MTA: dns; %s\n", hu->name);
+ fprintf(fp, "Remote-MTA: dns; %s\n", hu->name);
#ifdef EXPERIMENTAL_DSN_INFO
+ {
+ const uschar * s;
if (hu->address)
{
uschar * p = hu->port == 25
? US"" : string_sprintf(":%d", hu->port);
- fprintf(f, "Remote-MTA: X-ip; [%s]%s\n", hu->address, p);
+ fprintf(fp, "Remote-MTA: X-ip; [%s]%s\n", hu->address, p);
}
if ((s = addr->smtp_greeting) && *s)
- fprintf(f, "X-Remote-MTA-smtp-greeting: X-str; %s\n", s);
+ fprintf(fp, "X-Remote-MTA-smtp-greeting: X-str; %s\n", s);
if ((s = addr->helo_response) && *s)
- fprintf(f, "X-Remote-MTA-helo-response: X-str; %s\n", s);
+ fprintf(fp, "X-Remote-MTA-helo-response: X-str; %s\n", s);
if ((s = addr->message) && *s)
- fprintf(f, "X-Exim-Diagnostic: X-str; %s\n", s);
+ fprintf(fp, "X-Exim-Diagnostic: X-str; %s\n", s);
+ }
#endif
- print_dsn_diagnostic_code(addr, f);
+ print_dsn_diagnostic_code(addr, fp);
}
- fputc('\n', f);
+ fputc('\n', fp);
}
/* Now copy the message, trying to give an intelligible comment if
bounce_return_size_limit is always honored.
*/
- fprintf(f, "--%s\n", bound);
+ fprintf(fp, "--%s\n", bound);
dsnlimitmsg = US"X-Exim-DSN-Information: Due to administrative limits only headers are returned";
dsnnotifyhdr = NULL;
if (message_smtputf8)
fputs(topt & topt_no_body ? "Content-type: message/global-headers\n\n"
: "Content-type: message/global\n\n",
- f);
+ fp);
else
#endif
fputs(topt & topt_no_body ? "Content-type: text/rfc822-headers\n\n"
: "Content-type: message/rfc822\n\n",
- f);
+ fp);
- fflush(f);
+ fflush(fp);
transport_filter_argv = NULL; /* Just in case */
return_path = sender_address; /* In case not previously set */
{ /* Dummy transport for headers add */
transport_ctx tctx = {{0}};
transport_instance tb = {0};
- tctx.u.fd = fileno(f);
+ tctx.u.fd = fileno(fp);
tctx.tblock = &tb;
tctx.options = topt;
tb.add_headers = dsnnotifyhdr;
transport_write_message(&tctx, 0);
}
- fflush(f);
+ fflush(fp);
/* we never add the final text. close the file */
if (emf)
(void)fclose(emf);
- fprintf(f, "\n--%s--\n", bound);
+ fprintf(fp, "\n--%s--\n", bound);
/* Close the file, which should send an EOF to the child process
that is receiving the message. Wait for it to finish. */
- (void)fclose(f);
+ (void)fclose(fp);
rc = child_close(pid, 0); /* Waits for child to close, no timeout */
/* In the test harness, let the child do it's thing first. */
- if (running_in_test_harness) millisleep(500);
+ if (f.running_in_test_harness) millisleep(500);
/* If the process failed, there was some disaster in setting up the
error message. Unless the message is very old, ensure that addr_defer
if (now - received_time.tv_sec < retry_maximum_timeout && !addr_defer)
{
addr_defer = (address_item *)(+1);
- deliver_freeze = TRUE;
+ f.deliver_freeze = TRUE;
deliver_frozen_at = time(NULL);
/* Panic-dies on error */
(void)spool_write_header(message_id, SW_DELIVERING, NULL);
}
}
-disable_logging = FALSE; /* In case left set */
+f.disable_logging = FALSE; /* In case left set */
/* Come here from the mua_wrapper case if routing goes wrong */
log_write(0, LOG_MAIN, "Completed");
/* Unset deliver_freeze so that we won't try to move the spool files further down */
- deliver_freeze = FALSE;
+ f.deliver_freeze = FALSE;
#ifndef DISABLE_EVENT
(void) event_raise(event_action, US"msg:complete", NULL);
is not sent. Another attempt will be made at the next delivery attempt (if
it also defers). */
- if ( !queue_2stage
+ if ( !f.queue_2stage
&& delivery_attempted
- && ( ((addr_defer->dsn_flags & rf_dsnflags) == 0)
- || (addr_defer->dsn_flags & rf_notify_delay) == rf_notify_delay
+ && ( !(addr_defer->dsn_flags & rf_dsnflags)
+ || addr_defer->dsn_flags & rf_notify_delay
)
&& delay_warning[1] > 0
&& sender_address[0] != 0
time off the list. In queue runs, the list pointer gets updated in the
calling process. */
- if (running_in_test_harness && fudged_queue_times[0] != 0)
+ if (f.running_in_test_harness && fudged_queue_times[0] != 0)
{
int qt = readconf_readtime(fudged_queue_times, '/', FALSE);
if (qt >= 0)
/* If this was a first delivery attempt, unset the first time flag, and
ensure that the spool gets updated. */
- if (deliver_firsttime)
+ if (f.deliver_firsttime)
{
- deliver_firsttime = FALSE;
+ f.deliver_firsttime = FALSE;
update_spool = TRUE;
}
For the "tell" message, we turn \n back into newline. Also, insert a newline
near the start instead of the ": " string. */
- if (deliver_freeze)
+ if (f.deliver_freeze)
{
- if (freeze_tell && freeze_tell[0] != 0 && !local_error_message)
+ if (freeze_tell && freeze_tell[0] != 0 && !f.local_error_message)
{
uschar *s = string_copy(frozen_info);
uschar *ss = Ustrstr(s, " by the system filter: ");
DEBUG(D_deliver)
debug_printf("delivery deferred: update_spool=%d header_rewritten=%d\n",
- update_spool, header_rewritten);
+ update_spool, f.header_rewritten);
- if (update_spool || header_rewritten)
+ if (update_spool || f.header_rewritten)
/* Panic-dies on error */
(void)spool_write_header(message_id, SW_DELIVERING, NULL);
}
/* Move the message off the spool if requested */
#ifdef SUPPORT_MOVE_FROZEN_MESSAGES
- if (deliver_freeze && move_frozen_messages)
+ if (f.deliver_freeze && move_frozen_messages)
(void)spool_move_message(id, message_subdir, US"", US"F");
#endif
}
#ifdef EXIM_TFO_PROBE
tfo_probe();
#else
-tcp_fastopen_ok = TRUE;
+f.tcp_fastopen_ok = TRUE;
#endif
#ifdef SUPPORT_TLS
if (!regex_STARTTLS) regex_STARTTLS =
regex_must_compile(US"\\n250[\\s\\-]STARTTLS(\\s|\\n|$)", FALSE, TRUE);
+
+# ifdef EXPERIMENTAL_REQUIRETLS
+if (!regex_REQUIRETLS) regex_REQUIRETLS =
+ regex_must_compile(US"\\n250[\\s\\-]REQUIRETLS(\\s|\\n|$)", FALSE, TRUE);
+# endif
#endif
if (!regex_CHUNKING) regex_CHUNKING =
int rc;
uschar * new_sender_address,
* save_sender_address;
-BOOL save_qr = queue_running;
+BOOL save_qr = f.queue_running;
uschar * spoolname;
/* make spool_open_datafile non-noisy on fail */
-queue_running = TRUE;
+f.queue_running = TRUE;
/* Side effect: message_subdir is set for the (possibly split) spool directory */
deliver_datafile = spool_open_datafile(id);
-queue_running = save_qr;
+f.queue_running = save_qr;
if (deliver_datafile < 0)
return NULL;
{
uschar * where;
-if (cutthrough.fd >= 0 && cutthrough.callout_hold_only)
+if (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only)
{
- int pfd[2], channel_fd = cutthrough.fd, pid;
+ int channel_fd = cutthrough.cctx.sock;
smtp_peer_options = cutthrough.peer_options;
continue_sequence = 0;
#ifdef SUPPORT_TLS
if (cutthrough.is_tls)
{
+ int pfd[2], pid;
+
smtp_peer_options |= OPTION_TLS;
sending_ip_address = cutthrough.snd_ip;
sending_port = cutthrough.snd_port;
else if (pid == 0) /* child: fork again to totally disconnect */
{
- if (running_in_test_harness) millisleep(100); /* let parent debug out */
+ if (f.running_in_test_harness) millisleep(100); /* let parent debug out */
/* does not return */
- smtp_proxy_tls(big_buffer, big_buffer_size, pfd, 5*60);
+ smtp_proxy_tls(cutthrough.cctx.tls_ctx, big_buffer, big_buffer_size,
+ pfd, 5*60);
}
DEBUG(D_transport) debug_printf("proxy-proc inter-pid %d\n", pid);
}
return; /* compiler quietening; control does not reach here. */
+#ifdef SUPPORT_TLS
fail:
log_write(0,
LOG_MAIN | (exec_type == CEE_EXEC_EXIT ? LOG_PANIC : LOG_PANIC_DIE),
Note: this must be _exit(), not exit(). */
_exit(EX_EXECFAILED);
+#endif
}
/* vi: aw ai sw=2
projects / exim.git / blobdiff