-/* $Cambridge: exim/src/src/daemon.c,v 1.24 2007/06/27 11:01:51 ph10 Exp $ */
-
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2007 */
+/* Copyright (c) University of Cambridge 1995 - 2017 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions concerned with running Exim as a daemon */
} smtp_slot;
/* An empty slot for initializing (Standard C does not allow constructor
-expressions in assigments except as initializers in declarations). */
+expressions in assignments except as initializers in declarations). */
-static smtp_slot empty_smtp_slot = { 0, NULL };
+static smtp_slot empty_smtp_slot = { .pid = 0, .host_address = NULL };
* Local static variables *
*************************************************/
-static volatile BOOL sigchld_seen;
-static volatile BOOL sighup_seen;
+static SIGNAL_BOOL sigchld_seen;
+static SIGNAL_BOOL sighup_seen;
static int accept_retry_count = 0;
static int accept_retry_errno;
uschar *emsg = (was_errno <= 0)? US"" :
string_sprintf(": %s", strerror(was_errno));
log_write(0, LOG_MAIN|LOG_PANIC, "%s%s", log_msg, emsg);
-if (smtp_out != NULL) smtp_printf("421 %s\r\n", smtp_msg);
+if (smtp_out != NULL) smtp_printf("421 %s\r\n", FALSE, smtp_msg);
}
EXIM_SOCKLEN_T ifsize = sizeof(interface_sockaddr);
int dup_accept_socket = -1;
int max_for_this_host = 0;
-int wfsize = 0;
-int wfptr = 0;
-int use_log_write_selector = log_write_selector;
-uschar *whofrom = NULL;
+int save_log_selector = *log_selector;
+gstring * whofrom;
void *reset_point = store_get(0);
input stream. These operations fail only the exceptional circumstances. Note
that never_error() won't use smtp_out if it is NULL. */
-smtp_out = fdopen(accept_socket, "wb");
-if (smtp_out == NULL)
+if (!(smtp_out = fdopen(accept_socket, "wb")))
{
never_error(US"daemon: fdopen() for smtp_out failed", US"", errno);
goto ERROR_RETURN;
}
-dup_accept_socket = dup(accept_socket);
-if (dup_accept_socket < 0)
+if ((dup_accept_socket = dup(accept_socket)) < 0)
{
never_error(US"daemon: couldn't dup socket descriptor",
US"Connection setup failed", errno);
goto ERROR_RETURN;
}
-smtp_in = fdopen(dup_accept_socket, "rb");
-if (smtp_in == NULL)
+if (!(smtp_in = fdopen(dup_accept_socket, "rb")))
{
never_error(US"daemon: fdopen() for smtp_in failed",
US"Connection setup failed", errno);
{
log_write(0, LOG_MAIN | ((errno == ECONNRESET)? 0 : LOG_PANIC),
"getsockname() failed: %s", strerror(errno));
- smtp_printf("421 Local problem: getsockname() failed; please try again later\r\n");
+ smtp_printf("421 Local problem: getsockname() failed; please try again later\r\n", FALSE);
goto ERROR_RETURN;
}
the local interface data. This is for logging; at the end of this function the
memory is reclaimed. */
-whofrom = string_append(whofrom, &wfsize, &wfptr, 3, "[", sender_host_address, "]");
+whofrom = string_append(NULL, 3, "[", sender_host_address, "]");
-if ((log_extra_selector & LX_incoming_port) != 0)
- whofrom = string_append(whofrom, &wfsize, &wfptr, 2, ":", string_sprintf("%d",
- sender_host_port));
+if (LOGGING(incoming_port))
+ whofrom = string_append(whofrom, 2, ":", string_sprintf("%d", sender_host_port));
-if ((log_extra_selector & LX_incoming_interface) != 0)
- whofrom = string_append(whofrom, &wfsize, &wfptr, 4, " I=[",
+if (LOGGING(incoming_interface))
+ whofrom = string_append(whofrom, 4, " I=[",
interface_address, "]:", string_sprintf("%d", interface_port));
-whofrom[wfptr] = 0; /* Terminate the newly-built string */
+(void) string_from_gstring(whofrom); /* Terminate the newly-built string */
/* Check maximum number of connections. We do not check for reserved
connections or unacceptable hosts here. That is done in the subprocess because
DEBUG(D_any) debug_printf("rejecting SMTP connection: count=%d max=%d\n",
smtp_accept_count, smtp_accept_max);
smtp_printf("421 Too many concurrent SMTP connections; "
- "please try again later.\r\n");
+ "please try again later.\r\n", FALSE);
log_write(L_connection_reject,
LOG_MAIN, "Connection from %s refused: too many connections",
- whofrom);
+ whofrom->s);
goto ERROR_RETURN;
}
{
DEBUG(D_any) debug_printf("rejecting SMTP connection: load average = %.2f\n",
(double)load_average/1000.0);
- smtp_printf("421 Too much load; please try again later.\r\n");
+ smtp_printf("421 Too much load; please try again later.\r\n", FALSE);
log_write(L_connection_reject,
LOG_MAIN, "Connection from %s refused: load average = %.2f",
- whofrom, (double)load_average/1000.0);
+ whofrom->s, (double)load_average/1000.0);
goto ERROR_RETURN;
}
}
{
if (!expand_string_forcedfail)
log_write(0, LOG_MAIN|LOG_PANIC, "expansion of smtp_accept_max_per_host "
- "failed for %s: %s", whofrom, expand_string_message);
+ "failed for %s: %s", whofrom->s, expand_string_message);
}
/* For speed, interpret a decimal number inline here */
else
max_for_this_host = max_for_this_host * 10 + *s++ - '0';
if (*s != 0)
log_write(0, LOG_MAIN|LOG_PANIC, "expansion of smtp_accept_max_per_host "
- "for %s contains non-digit: %s", whofrom, expanded);
+ "for %s contains non-digit: %s", whofrom->s, expanded);
}
}
int other_host_count = 0; /* keep a count of non matches to optimise */
for (i = 0; i < smtp_accept_max; ++i)
- {
- if (smtp_slots[i].host_address != NULL)
+ if (smtp_slots[i].host_address)
{
if (Ustrcmp(sender_host_address, smtp_slots[i].host_address) == 0)
host_accept_count++;
((smtp_accept_count - other_host_count) < max_for_this_host))
break;
}
- }
if (host_accept_count >= max_for_this_host)
{
"IP address: count=%d max=%d\n",
host_accept_count, max_for_this_host);
smtp_printf("421 Too many concurrent SMTP connections "
- "from this IP address; please try again later.\r\n");
+ "from this IP address; please try again later.\r\n", FALSE);
log_write(L_connection_reject,
LOG_MAIN, "Connection from %s refused: too many connections "
- "from that IP address", whofrom);
+ "from that IP address", whofrom->s);
goto ERROR_RETURN;
}
}
selector is set, check whether the host is on the list for logging. If not,
arrange to unset the selector in the subprocess. */
-if ((log_write_selector & L_smtp_connection) != 0)
+if (LOGGING(smtp_connection))
{
uschar *list = hosts_connection_nolog;
+ memset(sender_host_cache, 0, sizeof(sender_host_cache));
if (list != NULL && verify_check_host(&list) == OK)
- use_log_write_selector &= ~L_smtp_connection;
+ save_log_selector &= ~L_smtp_connection;
else
log_write(L_smtp_connection, LOG_MAIN, "SMTP connection from %s "
- "(TCP/IP connection count = %d)", whofrom, smtp_accept_count + 1);
+ "(TCP/IP connection count = %d)", whofrom->s, smtp_accept_count + 1);
}
/* Now we can fork the accepting process; do a lookup tidy, just in case any
/* May have been modified for the subprocess */
- log_write_selector = use_log_write_selector;
+ *log_selector = save_log_selector;
/* Get the local interface address into permanent store */
/* Check for a tls-on-connect port */
- if (host_is_tls_on_connect_port(interface_port)) tls_on_connect = TRUE;
+ if (host_is_tls_on_connect_port(interface_port)) tls_in.on_connect = TRUE;
/* Expand smtp_active_hostname if required. We do not do this any earlier,
because it may depend on the local interface address (indeed, that is most
likely what it depends on.) */
smtp_active_hostname = primary_hostname;
- if (raw_active_hostname != NULL)
+ if (raw_active_hostname)
{
- uschar *nah = expand_string(raw_active_hostname);
- if (nah == NULL)
+ uschar * nah = expand_string(raw_active_hostname);
+ if (!nah)
{
if (!expand_string_forcedfail)
{
"(smtp_active_hostname): %s", raw_active_hostname,
expand_string_message);
smtp_printf("421 Local configuration error; "
- "please try again later.\r\n");
+ "please try again later.\r\n", FALSE);
mac_smtp_fflush();
search_tidyup();
_exit(EXIT_FAILURE);
}
}
- else if (nah[0] != 0) smtp_active_hostname = nah;
+ else if (*nah) smtp_active_hostname = nah;
}
/* Initialize the queueing flags */
for (i = 0; i < listen_socket_count; i++) (void)close(listen_sockets[i]);
+ /* Set FD_CLOEXEC on the SMTP socket. We don't want any rogue child processes
+ to be able to communicate with them, under any circumstances. */
+ (void)fcntl(accept_socket, F_SETFD,
+ fcntl(accept_socket, F_GETFD) | FD_CLOEXEC);
+ (void)fcntl(dup_accept_socket, F_SETFD,
+ fcntl(dup_accept_socket, F_GETFD) | FD_CLOEXEC);
+
#ifdef SA_NOCLDWAIT
act.sa_handler = SIG_IGN;
sigemptyset(&(act.sa_mask));
search_tidyup(); /* Close cached databases */
if (!ok) /* Connection was dropped */
{
+ cancel_cutthrough_connection(TRUE, US"receive dropped");
mac_smtp_fflush();
smtp_log_no_mail(); /* Log no mail if configured */
_exit(EXIT_SUCCESS);
}
else
{
- mac_smtp_fflush();
+ if (smtp_out)
+ {
+ int i, fd = fileno(smtp_in);
+ uschar buf[128];
+
+ mac_smtp_fflush();
+ /* drain socket, for clean TCP FINs */
+ if (fcntl(fd, F_SETFL, O_NONBLOCK) == 0)
+ for(i = 16; read(fd, buf, sizeof(buf)) > 0 && i > 0; ) i--;
+ }
+ cancel_cutthrough_connection(TRUE, US"message setup dropped");
search_tidyup();
smtp_log_no_mail(); /* Log no mail if configured */
- _exit((rc == 0)? EXIT_SUCCESS : EXIT_FAILURE);
+
+ /*XXX should we pause briefly, hoping that the client will be the
+ active TCP closer hence get the TCP_WAIT endpoint? */
+ DEBUG(D_receive) debug_printf("SMTP>>(close on process exit)\n");
+ _exit(rc ? EXIT_FAILURE : EXIT_SUCCESS);
}
/* Show the recipients when debugging */
DEBUG(D_receive)
{
int i;
- if (sender_address != NULL)
+ if (sender_address)
debug_printf("Sender: %s\n", sender_address);
- if (recipients_list != NULL)
+ if (recipients_list)
{
debug_printf("Recipients:\n");
for (i = 0; i < recipients_count; i++)
/* Reclaim up the store used in accepting this message */
+ return_path = sender_address = NULL;
+ authenticated_sender = NULL;
+ sending_ip_address = NULL;
+ deliver_host_address = deliver_host =
+ deliver_domain_orig = deliver_localpart_orig = NULL;
+ dnslist_domain = dnslist_matched = NULL;
+ callout_address = NULL;
+#ifndef DISABLE_DKIM
+ dkim_cur_signer = NULL;
+#endif
+ acl_var_m = NULL;
store_reset(reset_point);
/* If queue_only is set or if there are too many incoming connections in
very long-lived connections from scanning appliances where this is not the
best strategy. In such cases, queue_only_load_latch should be set false. */
- local_queue_only = session_local_queue_only;
- if (!local_queue_only && queue_only_load >= 0)
+ if ( !(local_queue_only = session_local_queue_only)
+ && queue_only_load >= 0
+ && (local_queue_only = (load_average = OS_GETLOADAVG()) > queue_only_load)
+ )
{
- local_queue_only = (load_average = OS_GETLOADAVG()) > queue_only_load;
- if (local_queue_only)
- {
- queue_only_reason = 3;
- if (queue_only_load_latch) session_local_queue_only = TRUE;
- }
+ queue_only_reason = 3;
+ if (queue_only_load_latch) session_local_queue_only = TRUE;
}
/* Log the queueing here, when it will get a message id attached, but
if (local_queue_only) switch(queue_only_reason)
{
- case 1:
- log_write(L_delay_delivery,
+ case 1: log_write(L_delay_delivery,
LOG_MAIN, "no immediate delivery: too many connections "
"(%d, max %d)", smtp_accept_count, smtp_accept_queue);
- break;
+ break;
- case 2:
- log_write(L_delay_delivery,
+ case 2: log_write(L_delay_delivery,
LOG_MAIN, "no immediate delivery: more than %d messages "
"received in one connection", smtp_accept_queue_per_connection);
- break;
+ break;
- case 3:
- log_write(L_delay_delivery,
+ case 3: log_write(L_delay_delivery,
LOG_MAIN, "no immediate delivery: load average %.2f",
(double)load_average/1000.0);
- break;
+ break;
}
/* If a delivery attempt is required, spin off a new process to handle it.
/* Don't ever molest the parent's SSL connection, but do clean up
the data structures if necessary. */
- #ifdef SUPPORT_TLS
- tls_close(FALSE);
- #endif
+#ifdef SUPPORT_TLS
+ tls_close(TRUE, FALSE);
+#endif
/* Reset SIGHUP and SIGCHLD in the child in both cases. */
if (geteuid() != root_uid && !deliver_drop_privilege)
{
signal(SIGALRM, SIG_DFL);
- (void)child_exec_exim(CEE_EXEC_PANIC, FALSE, NULL, FALSE, 2, US"-Mc",
- message_id);
+ delivery_re_exec(CEE_EXEC_PANIC);
/* Control does not return here. */
}
/* No need to re-exec; SIGALRM remains set to the default handler */
- (void)deliver_message(message_id, FALSE, FALSE);
+ (void) deliver_message(message_id, FALSE, FALSE);
search_tidyup();
_exit(EXIT_SUCCESS);
}
if (dpid > 0)
{
+ release_cutthrough_connection(US"passed for delivery");
DEBUG(D_any) debug_printf("forked delivery process %d\n", (int)dpid);
}
else
- {
+ {
+ cancel_cutthrough_connection(TRUE, US"delivery fork failed");
log_write(0, LOG_MAIN|LOG_PANIC, "daemon: delivery process fork "
"failed: %s", strerror(errno));
- }
+ }
}
}
}
remember the pid for ticking off when the child completes. */
if (pid < 0)
- {
never_error(US"daemon: accept process fork failed", US"Fork failed", errno);
- }
else
{
int i;
for (i = 0; i < smtp_accept_max; ++i)
- {
if (smtp_slots[i].pid <= 0)
{
smtp_slots[i].pid = pid;
smtp_accept_count++;
break;
}
- }
DEBUG(D_any) debug_printf("%d SMTP accept process%s running\n",
smtp_accept_count, (smtp_accept_count == 1)? "" : "es");
}
exist, something went wrong while setting things up. Make sure the socket
descriptors are closed, in order to drop the connection. */
-if (smtp_out != NULL)
+if (smtp_out)
{
if (fclose(smtp_out) != 0 && errno != ECONNRESET && errno != EPIPE)
log_write(0, LOG_MAIN|LOG_PANIC, "daemon: fclose(smtp_out) failed: %s",
}
else (void)close(accept_socket);
-if (smtp_in != NULL)
+if (smtp_in)
{
if (fclose(smtp_in) != 0 && errno != ECONNRESET && errno != EPIPE)
log_write(0, LOG_MAIN|LOG_PANIC, "daemon: fclose(smtp_in) failed: %s",
/* Release any store used in this process, including the store used for holding
the incoming host address and an expanded active_hostname. */
+log_close_all();
+interface_address =
+sender_host_address = NULL;
store_reset(reset_point);
sender_host_address = NULL;
}
while ((pid = waitpid(-1, &status, WNOHANG)) > 0)
{
int i;
- DEBUG(D_any) debug_printf("child %d ended: status=0x%x\n", (int)pid,
- status);
+ DEBUG(D_any)
+ {
+ debug_printf("child %d ended: status=0x%x\n", (int)pid, status);
+#ifdef WCOREDUMP
+ if (WIFEXITED(status))
+ debug_printf(" normal exit, %d\n", WEXITSTATUS(status));
+ else if (WIFSIGNALED(status))
+ debug_printf(" signal exit, signal %d%s\n", WTERMSIG(status),
+ WCOREDUMP(status) ? " (core dumped)" : "");
+#endif
+ }
/* If it's a listening daemon for which we are keeping track of individual
subprocesses, deal with an accepting process that has terminated. */
- if (smtp_slots != NULL)
+ if (smtp_slots)
{
for (i = 0; i < smtp_accept_max; i++)
- {
if (smtp_slots[i].pid == pid)
{
- if (smtp_slots[i].host_address != NULL)
+ if (smtp_slots[i].host_address)
store_free(smtp_slots[i].host_address);
smtp_slots[i] = empty_smtp_slot;
if (--smtp_accept_count < 0) smtp_accept_count = 0;
smtp_accept_count, (smtp_accept_count == 1)? "" : "es");
break;
}
- }
if (i < smtp_accept_max) continue; /* Found an accepting process */
}
/* If it wasn't an accepting process, see if it was a queue-runner
process that we are tracking. */
- if (queue_pid_slots != NULL)
+ if (queue_pid_slots)
{
- for (i = 0; i < queue_run_max; i++)
- {
+ int max = atoi(CS expand_string(queue_run_max));
+ for (i = 0; i < max; i++)
if (queue_pid_slots[i] == pid)
{
queue_pid_slots[i] = 0;
queue_run_count, (queue_run_count == 1)? "" : "es");
break;
}
- }
}
}
}
int *listen_sockets = NULL;
int listen_socket_count = 0;
ip_address_item *addresses = NULL;
+time_t last_connection_time = (time_t)0;
+int local_queue_run_max = atoi(CS expand_string(queue_run_max));
/* If any debugging options are set, turn on the D_pid bit so that all
debugging lines get the pid added. */
DEBUG(D_any|D_v) debug_selector |= D_pid;
+if (inetd_wait_mode)
+ {
+ listen_socket_count = 1;
+ listen_sockets = store_get(sizeof(int));
+ (void) close(3);
+ if (dup2(0, 3) == -1)
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE,
+ "failed to dup inetd socket safely away: %s", strerror(errno));
+
+ listen_sockets[0] = 3;
+ (void) close(0);
+ (void) close(1);
+ (void) close(2);
+ exim_nullstd();
+
+ if (debug_file == stderr)
+ {
+ /* need a call to log_write before call to open debug_file, so that
+ log.c:file_path has been initialised. This is unfortunate. */
+ log_write(0, LOG_MAIN, "debugging Exim in inetd wait mode starting");
+
+ fclose(debug_file);
+ debug_file = NULL;
+ exim_nullstd(); /* re-open fd2 after we just closed it again */
+ debug_logging_activate(US"-wait", NULL);
+ }
+
+ DEBUG(D_any) debug_printf("running in inetd wait mode\n");
+
+ /* As per below, when creating sockets ourselves, we handle tcp_nodelay for
+ our own buffering; we assume though that inetd set the socket REUSEADDR. */
+
+ if (tcp_nodelay)
+ if (setsockopt(3, IPPROTO_TCP, TCP_NODELAY, US &on, sizeof(on)))
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to set socket NODELAY: %s",
+ strerror(errno));
+ }
+
+
+if (inetd_wait_mode || daemon_listen)
+ {
+ /* If any option requiring a load average to be available during the
+ reception of a message is set, call os_getloadavg() while we are root
+ for those OS for which this is necessary the first time it is called (in
+ order to perform an "open" on the kernel memory file). */
+
+ #ifdef LOAD_AVG_NEEDS_ROOT
+ if (queue_only_load >= 0 || smtp_load_reserve >= 0 ||
+ (deliver_queue_load_max >= 0 && deliver_drop_privilege))
+ (void)os_getloadavg();
+ #endif
+ }
+
/* Do the preparation for setting up a listener on one or more interfaces, and
possible on various ports. This is controlled by the combination of
first, so that we can return non-zero if there are any syntax errors, and also
write to stderr. */
-if (daemon_listen)
+if (daemon_listen && !inetd_wait_mode)
{
int *default_smtp_port;
int sep;
int pct = 0;
uschar *s;
- uschar *list;
+ const uschar * list;
uschar *local_iface_source = US"local_interfaces";
ip_address_item *ipa;
ip_address_item **pipa;
- /* If any option requiring a load average to be available during the
- reception of a message is set, call os_getloadavg() while we are root
- for those OS for which this is necessary the first time it is called (in
- order to perform an "open" on the kernel memory file). */
-
- #ifdef LOAD_AVG_NEEDS_ROOT
- if (queue_only_load >= 0 || smtp_load_reserve >= 0 ||
- (deliver_queue_load_max >= 0 && deliver_drop_privilege))
- (void)os_getloadavg();
- #endif
-
/* If -oX was used, disable the writing of a pid file unless -oP was
explicitly used to force it. Then scan the string given to -oX. Any items
that contain neither a dot nor a colon are used to override daemon_smtp_port.
Any other items are used to override local_interfaces. */
- if (override_local_interfaces != NULL)
+ if (override_local_interfaces)
{
- uschar *new_smtp_port = NULL;
- uschar *new_local_interfaces = NULL;
- int portsize = 0;
- int portptr = 0;
- int ifacesize = 0;
- int ifaceptr = 0;
+ gstring * new_smtp_port = NULL;
+ gstring * new_local_interfaces = NULL;
if (override_pid_file_path == NULL) write_pid = FALSE;
list = override_local_interfaces;
sep = 0;
- while ((s = string_nextinlist(&list,&sep,big_buffer,big_buffer_size))
- != NULL)
+ while ((s = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
{
uschar joinstr[4];
- uschar **ptr;
- int *sizeptr;
- int *ptrptr;
+ gstring ** gp;
if (Ustrpbrk(s, ".:") == NULL)
- {
- ptr = &new_smtp_port;
- sizeptr = &portsize;
- ptrptr = &portptr;
- }
+ gp = &new_smtp_port;
else
- {
- ptr = &new_local_interfaces;
- sizeptr = &ifacesize;
- ptrptr = &ifaceptr;
- }
+ gp = &new_local_interfaces;
- if (*ptr == NULL)
+ if (!*gp)
{
joinstr[0] = sep;
joinstr[1] = ' ';
- *ptr = string_cat(*ptr, sizeptr, ptrptr, US"<", 1);
+ *gp = string_catn(*gp, US"<", 1);
}
- *ptr = string_cat(*ptr, sizeptr, ptrptr, joinstr, 2);
- *ptr = string_cat(*ptr, sizeptr, ptrptr, s, Ustrlen(s));
+ *gp = string_catn(*gp, joinstr, 2);
+ *gp = string_cat (*gp, s);
}
- if (new_smtp_port != NULL)
+ if (new_smtp_port)
{
- new_smtp_port[portptr] = 0;
- daemon_smtp_port = new_smtp_port;
+ daemon_smtp_port = string_from_gstring(new_smtp_port);
DEBUG(D_any) debug_printf("daemon_smtp_port overridden by -oX:\n %s\n",
daemon_smtp_port);
}
- if (new_local_interfaces != NULL)
+ if (new_local_interfaces)
{
- new_local_interfaces[ifaceptr] = 0;
- local_interfaces = new_local_interfaces;
+ local_interfaces = string_from_gstring(new_local_interfaces);
local_iface_source = US"-oX data";
DEBUG(D_any) debug_printf("local_interfaces overridden by -oX:\n %s\n",
local_interfaces);
}
/* Create a list of default SMTP ports, to be used if local_interfaces
- contains entries without explict ports. First count the number of ports, then
+ contains entries without explicit ports. First count the number of ports, then
build a translated list in a vector. */
list = daemon_smtp_port;
sep = 0;
- while ((s = string_nextinlist(&list,&sep,big_buffer,big_buffer_size)) != NULL)
+ while ((s = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
pct++;
default_smtp_port = store_get((pct+1) * sizeof(int));
list = daemon_smtp_port;
sep = 0;
for (pct = 0;
- (s = string_nextinlist(&list,&sep,big_buffer,big_buffer_size)) != NULL;
+ (s = string_nextinlist(&list, &sep, big_buffer, big_buffer_size));
pct++)
{
if (isdigit(*s))
else
{
struct servent *smtp_service = getservbyname(CS s, "tcp");
- if (smtp_service == NULL)
+ if (!smtp_service)
log_write(0, LOG_PANIC_DIE|LOG_CONFIG, "TCP port \"%s\" not found", s);
default_smtp_port[pct] = ntohs(smtp_service->s_port);
}
}
default_smtp_port[pct] = 0;
+ /* Check the list of TLS-on-connect ports and do name lookups if needed */
+
+ list = tls_in.on_connect_ports;
+ sep = 0;
+ while ((s = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
+ if (!isdigit(*s))
+ {
+ gstring * g = NULL;
+
+ list = tls_in.on_connect_ports;
+ tls_in.on_connect_ports = NULL;
+ sep = 0;
+ while ((s = string_nextinlist(&list, &sep, big_buffer, big_buffer_size)))
+ {
+ if (!isdigit(*s))
+ {
+ struct servent * smtp_service = getservbyname(CS s, "tcp");
+ if (!smtp_service)
+ log_write(0, LOG_PANIC_DIE|LOG_CONFIG, "TCP port \"%s\" not found", s);
+ s = string_sprintf("%d", (int)ntohs(smtp_service->s_port));
+ }
+ g = string_append_listele(g, ':', s);
+ }
+ if (g)
+ tls_in.on_connect_ports = g->s;
+ break;
+ }
+
/* Create the list of local interfaces, possibly with ports included. This
list may contain references to 0.0.0.0 and ::0 as wildcards. These special
values are converted below. */
In the same scan, fill in missing port numbers from the default list. When
there is more than one item in the list, extra items are created. */
- for (ipa = addresses; ipa != NULL; ipa = ipa->next)
+ for (ipa = addresses; ipa; ipa = ipa->next)
{
int i;
- if (Ustrcmp(ipa->address, "0.0.0.0") == 0) ipa->address[0] = 0;
+ if (Ustrcmp(ipa->address, "0.0.0.0") == 0)
+ ipa->address[0] = 0;
else if (Ustrcmp(ipa->address, "::0") == 0)
{
ipa->address[0] = ':';
if (daemon_smtp_port[0] <= 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "no port specified for interface "
"%s and daemon_smtp_port is unset; cannot start daemon",
- (ipa->address[0] == 0)? US"\"all IPv4\"" :
- (ipa->address[1] == 0)? US"\"all IPv6\"" : ipa->address);
+ ipa->address[0] == 0 ? US"\"all IPv4\"" :
+ ipa->address[1] == 0 ? US"\"all IPv6\"" : ipa->address);
+
ipa->port = default_smtp_port[0];
for (i = 1; default_smtp_port[i] > 0; i++)
{
ip_address_item *new = store_get(sizeof(ip_address_item));
+
memcpy(new->address, ipa->address, Ustrlen(ipa->address) + 1);
new->port = default_smtp_port[i];
new->next = ipa->next;
also simplifies the construction of the "daemon started" log line. */
pipa = &addresses;
- for (ipa = addresses; ipa != NULL; pipa = &(ipa->next), ipa = ipa->next)
+ for (ipa = addresses; ipa; pipa = &ipa->next, ipa = ipa->next)
{
ip_address_item *ipa2;
/* Handle an IPv4 wildcard */
if (ipa->address[0] == 0)
- {
- for (ipa2 = ipa; ipa2->next != NULL; ipa2 = ipa2->next)
+ for (ipa2 = ipa; ipa2->next; ipa2 = ipa2->next)
{
ip_address_item *ipa3 = ipa2->next;
if (ipa3->address[0] == ':' &&
break;
}
}
- }
/* Handle an IPv6 wildcard. */
else if (ipa->address[0] == ':' && ipa->address[1] == 0)
- {
- for (ipa2 = ipa; ipa2->next != NULL; ipa2 = ipa2->next)
+ for (ipa2 = ipa; ipa2->next; ipa2 = ipa2->next)
{
ip_address_item *ipa3 = ipa2->next;
if (ipa3->address[0] == 0 && ipa3->port == ipa->port)
break;
}
}
- }
}
/* Get a vector to remember all the sockets in */
- for (ipa = addresses; ipa != NULL; ipa = ipa->next)
+ for (ipa = addresses; ipa; ipa = ipa->next)
listen_socket_count++;
- listen_sockets = store_get(sizeof(int *) * listen_socket_count);
+ listen_sockets = store_get(sizeof(int) * listen_socket_count);
+
+ } /* daemon_listen but not inetd_wait_mode */
+
+if (daemon_listen)
+ {
/* Do a sanity check on the max connects value just to save us from getting
a huge amount of store. */
/* The variable background_daemon is always false when debugging, but
can also be forced false in order to keep a non-debugging daemon in the
foreground. If background_daemon is true, close all open file descriptors that
-we know about, but then re-open stdin, stdout, and stderr to /dev/null.
+we know about, but then re-open stdin, stdout, and stderr to /dev/null. Also
+do this for inetd_wait mode.
This is protection against any called functions (in libraries, or in
Perl, or whatever) that think they can write to stderr (or stdout). Before this
setsid() for getting rid of the controlling terminal. For any OS that doesn't,
setsid() can be #defined as a no-op, or as something else. */
-if (background_daemon)
+if (background_daemon || inetd_wait_mode)
{
log_close_all(); /* Just in case anything was logged earlier */
search_tidyup(); /* Just in case any were used in reading the config. */
(void)close(2);
exim_nullstd(); /* Connect stdin/stdout/stderr to /dev/null */
log_stderr = NULL; /* So no attempt to copy paniclog output */
+ }
+if (background_daemon)
+ {
/* If the parent process of this one has pid == 1, we are re-initializing the
daemon as the result of a SIGHUP. In this case, there is no need to do
anything, because the controlling terminal has long gone. Otherwise, fork, in
/* We are now in the disconnected, daemon process (unless debugging). Set up
the listening sockets if required. */
-if (daemon_listen)
+if (daemon_listen && !inetd_wait_mode)
{
int sk;
- int on = 1;
ip_address_item *ipa;
/* For each IP address, create a socket, bind it to the appropriate port, and
wildcard = ipa->address[0] == 0;
}
- listen_sockets[sk] = ip_socket(SOCK_STREAM, af);
- if (listen_sockets[sk] < 0)
+ if ((listen_sockets[sk] = ip_socket(SOCK_STREAM, af)) < 0)
{
if (check_special_case(0, addresses, ipa, FALSE))
{
available. Just log failure (can get protocol not available, just like
socket creation can). */
- #ifdef IPV6_V6ONLY
+#ifdef IPV6_V6ONLY
if (af == AF_INET6 && wildcard &&
- setsockopt(listen_sockets[sk], IPPROTO_IPV6, IPV6_V6ONLY, (char *)(&on),
+ setsockopt(listen_sockets[sk], IPPROTO_IPV6, IPV6_V6ONLY, CS (&on),
sizeof(on)) < 0)
log_write(0, LOG_MAIN, "Setting IPV6_V6ONLY on daemon's IPv6 wildcard "
"socket failed (%s): carrying on without it", strerror(errno));
- #endif /* IPV6_V6ONLY */
+#endif /* IPV6_V6ONLY */
/* Set SO_REUSEADDR so that the daemon can be restarted while a connection
is being handled. Without this, a connection will prevent reuse of the
smtp port for listening. */
if (setsockopt(listen_sockets[sk], SOL_SOCKET, SO_REUSEADDR,
- (uschar *)(&on), sizeof(on)) < 0)
+ US (&on), sizeof(on)) < 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "setting SO_REUSEADDR on socket "
"failed when starting daemon: %s", strerror(errno));
disable this because it breaks some broken clients. */
if (tcp_nodelay) setsockopt(listen_sockets[sk], IPPROTO_TCP, TCP_NODELAY,
- (uschar *)(&on), sizeof(on));
+ US (&on), sizeof(on));
/* Now bind the socket to the required port; if Exim is being restarted
it may not always be possible to bind immediately, even with SO_REUSEADDR
necessary for (some release of) USAGI Linux; other IP stacks fail at the
listen() stage instead. */
+#ifdef TCP_FASTOPEN
+ tcp_fastopen_ok = TRUE;
+#endif
for(;;)
{
uschar *msg, *addr;
goto SKIP_SOCKET;
}
msg = US strerror(errno);
- addr = wildcard? ((af == AF_INET6)? US"(any IPv6)" : US"(any IPv4)") :
- ipa->address;
+ addr = wildcard
+ ? af == AF_INET6
+ ? US"(any IPv6)"
+ : US"(any IPv4)"
+ : ipa->address;
if (daemon_startup_retries <= 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE,
"socket bind() to port %d for address %s failed: %s: "
}
DEBUG(D_any)
- {
if (wildcard)
debug_printf("listening on all interfaces (IPv%c) port %d\n",
- (af == AF_INET6)? '6' : '4', ipa->port);
+ af == AF_INET6 ? '6' : '4', ipa->port);
else
debug_printf("listening on %s port %d\n", ipa->address, ipa->port);
+
+#ifdef TCP_FASTOPEN
+ if (setsockopt(listen_sockets[sk], IPPROTO_TCP, TCP_FASTOPEN,
+ &smtp_connect_backlog, sizeof(smtp_connect_backlog)))
+ {
+ DEBUG(D_any) debug_printf("setsockopt FASTOPEN: %s\n", strerror(errno));
+ tcp_fastopen_ok = FALSE;
}
+#endif
/* Start listening on the bound socket, establishing the maximum backlog of
connections that is allowed. On success, continue to the next address. */
if (!check_special_case(errno, addresses, ipa, TRUE))
log_write(0, LOG_PANIC_DIE, "listen() failed on interface %s: %s",
- wildcard? ((af == AF_INET6)? US"(any IPv6)" : US"(any IPv4)") :
- ipa->address,
+ wildcard
+ ? af == AF_INET6 ? US"(any IPv6)" : US"(any IPv4)" : ipa->address,
strerror(errno));
DEBUG(D_any) debug_printf("wildcard IPv4 listen() failed after IPv6 "
are going to ignore. We remove the address from the chain, and back up the
counts. */
- SKIP_SOCKET:
+ SKIP_SOCKET:
sk--; /* Back up the count */
listen_socket_count--; /* Reduce the total */
if (ipa == addresses) addresses = ipa->next; else
/* If we are not listening, we want to write a pid file only if -oP was
explicitly given. */
-else if (override_pid_file_path == NULL) write_pid = FALSE;
+else if (!override_pid_file_path)
+ write_pid = FALSE;
/* Write the pid to a known file for assistance in identification, if required.
We do this before giving up root privilege, because on some systems it is
{
FILE *f;
- if (override_pid_file_path != NULL)
+ if (override_pid_file_path)
pid_file_path = override_pid_file_path;
if (pid_file_path[0] == 0)
pid_file_path = string_sprintf("%s/exim-daemon.pid", spool_directory);
- f = modefopen(pid_file_path, "wb", 0644);
- if (f != NULL)
+ if ((f = modefopen(pid_file_path, "wb", 0644)))
{
(void)fprintf(f, "%d\n", (int)getpid());
(void)fclose(f);
DEBUG(D_any) debug_printf("pid written to %s\n", pid_file_path);
}
else
- {
DEBUG(D_any)
debug_printf("%s\n", string_open_failed(errno, "pid file %s",
pid_file_path));
- }
}
/* Set up the handler for SIGHUP, which causes a restart of the daemon. */
/* Get somewhere to keep the list of queue-runner pids if we are keeping track
of them (and also if we are doing queue runs). */
-if (queue_interval > 0 && queue_run_max > 0)
+if (queue_interval > 0 && local_queue_run_max > 0)
{
int i;
- queue_pid_slots = store_get(queue_run_max * sizeof(pid_t));
- for (i = 0; i < queue_run_max; i++) queue_pid_slots[i] = 0;
+ queue_pid_slots = store_get(local_queue_run_max * sizeof(pid_t));
+ for (i = 0; i < local_queue_run_max; i++) queue_pid_slots[i] = 0;
}
/* Set up the handler for termination of child processes. */
/* Log the start up of a daemon - at least one of listening or queue running
must be set up. */
-if (daemon_listen)
+if (inetd_wait_mode)
+ {
+ uschar *p = big_buffer;
+
+ if (inetd_wait_timeout >= 0)
+ sprintf(CS p, "terminating after %d seconds", inetd_wait_timeout);
+ else
+ sprintf(CS p, "with no wait timeout");
+
+ log_write(0, LOG_MAIN,
+ "exim %s daemon started: pid=%d, launched with listening socket, %s",
+ version_string, getpid(), big_buffer);
+ set_process_info("daemon(%s): pre-listening socket", version_string);
+
+ /* set up the timeout logic */
+ sigalrm_seen = 1;
+ }
+
+else if (daemon_listen)
{
int i, j;
int smtp_ports = 0;
int smtps_ports = 0;
- ip_address_item *ipa;
- uschar *p = big_buffer;
- uschar *qinfo = (queue_interval > 0)?
- string_sprintf("-q%s", readconf_printtime(queue_interval))
- :
- US"no queue runs";
+ ip_address_item * ipa, * i2;
+ uschar * p = big_buffer;
+ uschar * qinfo = queue_interval > 0
+ ? string_sprintf("-q%s", readconf_printtime(queue_interval))
+ : US"no queue runs";
/* Build a list of listening addresses in big_buffer, but limit it to 10
items. The style is for backwards compatibility.
for (j = 0; j < 2; j++)
{
- for (i = 0, ipa = addresses; i < 10 && ipa != NULL; i++, ipa = ipa->next)
- {
- /* First time round, look for SMTP ports; second time round, look for
- SMTPS ports. For the first one of each, insert leading text. */
-
- if (host_is_tls_on_connect_port(ipa->port) == (j > 0))
- {
- if (j == 0)
- {
- if (smtp_ports++ == 0)
- {
- memcpy(p, "SMTP on", 8);
- p += 7;
- }
- }
- else
- {
- if (smtps_ports++ == 0)
- {
- (void)sprintf(CS p, "%sSMTPS on",
- (smtp_ports == 0)? "":" and for ");
- while (*p != 0) p++;
- }
- }
-
- /* Now the information about the port (and sometimes interface) */
-
- if (ipa->address[0] == ':' && ipa->address[1] == 0)
- {
- if (ipa->next != NULL && ipa->next->address[0] == 0 &&
- ipa->next->port == ipa->port)
- {
- (void)sprintf(CS p, " port %d (IPv6 and IPv4)", ipa->port);
- ipa = ipa->next;
- }
- else if (ipa->v6_include_v4)
- (void)sprintf(CS p, " port %d (IPv6 with IPv4)", ipa->port);
- else
- (void)sprintf(CS p, " port %d (IPv6)", ipa->port);
- }
- else if (ipa->address[0] == 0)
- (void)sprintf(CS p, " port %d (IPv4)", ipa->port);
- else
- (void)sprintf(CS p, " [%s]:%d", ipa->address, ipa->port);
- while (*p != 0) p++;
- }
- }
-
- if (ipa != NULL)
+ for (i = 0, ipa = addresses; i < 10 && ipa; i++, ipa = ipa->next)
+ {
+ /* First time round, look for SMTP ports; second time round, look for
+ SMTPS ports. For the first one of each, insert leading text. */
+
+ if (host_is_tls_on_connect_port(ipa->port) == (j > 0))
+ {
+ if (j == 0)
+ {
+ if (smtp_ports++ == 0)
+ {
+ memcpy(p, "SMTP on", 8);
+ p += 7;
+ }
+ }
+ else
+ if (smtps_ports++ == 0)
+ p += sprintf(CS p, "%sSMTPS on",
+ smtp_ports == 0 ? "" : " and for ");
+
+ /* Now the information about the port (and sometimes interface) */
+
+ if (ipa->address[0] == ':' && ipa->address[1] == 0)
+ { /* v6 wildcard */
+ if (ipa->next && ipa->next->address[0] == 0 &&
+ ipa->next->port == ipa->port)
+ {
+ p += sprintf(CS p, " port %d (IPv6 and IPv4)", ipa->port);
+ ipa = ipa->next;
+ }
+ else if (ipa->v6_include_v4)
+ p += sprintf(CS p, " port %d (IPv6 with IPv4)", ipa->port);
+ else
+ p += sprintf(CS p, " port %d (IPv6)", ipa->port);
+ }
+ else if (ipa->address[0] == 0) /* v4 wildcard */
+ p += sprintf(CS p, " port %d (IPv4)", ipa->port);
+ else /* check for previously-seen IP */
+ {
+ for (i2 = addresses; i2 != ipa; i2 = i2->next)
+ if ( host_is_tls_on_connect_port(i2->port) == (j > 0)
+ && Ustrcmp(ipa->address, i2->address) == 0
+ )
+ { /* found; append port to list */
+ if (p[-1] == '}') p--;
+ while (isdigit(*--p)) ;
+ p += 1 + sprintf(CS p+1, "%s%d,%d}", *p == ',' ? "" : "{",
+ i2->port, ipa->port);
+ break;
+ }
+ if (i2 == ipa) /* first-time IP */
+ p += sprintf(CS p, " [%s]:%d", ipa->address, ipa->port);
+ }
+ }
+ }
+
+ if (ipa)
{
memcpy(p, " ...", 5);
p += 4;
log_write(0, LOG_MAIN,
"exim %s daemon started: pid=%d, %s, listening for %s",
version_string, getpid(), qinfo, big_buffer);
- set_process_info("daemon: %s, listening for %s", qinfo, big_buffer);
+ set_process_info("daemon(%s): %s, listening for %s",
+ version_string, qinfo, big_buffer);
}
else
{
+ uschar * s = *queue_name
+ ? string_sprintf("-qG%s/%s", queue_name, readconf_printtime(queue_interval))
+ : string_sprintf("-q%s", readconf_printtime(queue_interval));
log_write(0, LOG_MAIN,
- "exim %s daemon started: pid=%d, -q%s, not listening for SMTP",
- version_string, getpid(), readconf_printtime(queue_interval));
- set_process_info("daemon: -q%s, not listening",
- readconf_printtime(queue_interval));
+ "exim %s daemon started: pid=%d, %s, not listening for SMTP",
+ version_string, getpid(), s);
+ set_process_info("daemon(%s): %s, not listening", version_string, s);
}
+/* Do any work it might be useful to amortize over our children
+(eg: compile regex) */
+
+dns_pattern_init();
+
+#ifdef WITH_CONTENT_SCAN
+malware_init();
+#endif
/* Close the log so it can be renamed and moved. In the few cases below where
this long-running process writes to the log (always exceptional conditions), it
struct sockaddr_in accepted;
#endif
- EXIM_SOCKLEN_T len = sizeof(accepted);
+ EXIM_SOCKLEN_T len;
pid_t pid;
/* This code is placed first in the loop, so that it gets obeyed at the
- start, before the first wait. This causes the first queue-runner to be
- started immediately. */
+ start, before the first wait, for the queue-runner case, so that the first
+ one can be started immediately.
+
+ The other option is that we have an inetd wait timeout specified to -bw. */
if (sigalrm_seen)
{
- DEBUG(D_any) debug_printf("SIGALRM received\n");
+ if (inetd_wait_timeout > 0)
+ {
+ time_t resignal_interval = inetd_wait_timeout;
- /* Do a full queue run in a child process, if required, unless we already
- have enough queue runners on the go. If we are not running as root, a
- re-exec is required. */
+ if (last_connection_time == (time_t)0)
+ {
+ DEBUG(D_any)
+ debug_printf("inetd wait timeout expired, but still not seen first message, ignoring\n");
+ }
+ else
+ {
+ time_t now = time(NULL);
+ if (now == (time_t)-1)
+ {
+ DEBUG(D_any) debug_printf("failed to get time: %s\n", strerror(errno));
+ }
+ else
+ {
+ if ((now - last_connection_time) >= inetd_wait_timeout)
+ {
+ DEBUG(D_any)
+ debug_printf("inetd wait timeout %d expired, ending daemon\n",
+ inetd_wait_timeout);
+ log_write(0, LOG_MAIN, "exim %s daemon terminating, inetd wait timeout reached.\n",
+ version_string);
+ exit(EXIT_SUCCESS);
+ }
+ else
+ {
+ resignal_interval -= (now - last_connection_time);
+ }
+ }
+ }
+
+ sigalrm_seen = FALSE;
+ alarm(resignal_interval);
+ }
- if (queue_interval > 0 &&
- (queue_run_max <= 0 || queue_run_count < queue_run_max))
+ else
{
- if ((pid = fork()) == 0)
- {
- int sk;
+ DEBUG(D_any) debug_printf("SIGALRM received\n");
- DEBUG(D_any) debug_printf("Starting queue-runner: pid %d\n",
- (int)getpid());
+ /* Do a full queue run in a child process, if required, unless we already
+ have enough queue runners on the go. If we are not running as root, a
+ re-exec is required. */
- /* Disable debugging if it's required only for the daemon process. We
- leave the above message, because it ties up with the "child ended"
- debugging messages. */
+ if (queue_interval > 0 &&
+ (local_queue_run_max <= 0 || queue_run_count < local_queue_run_max))
+ {
+ if ((pid = fork()) == 0)
+ {
+ int sk;
- if (debug_daemon) debug_selector = 0;
+ DEBUG(D_any) debug_printf("Starting queue-runner: pid %d\n",
+ (int)getpid());
- /* Close any open listening sockets in the child */
+ /* Disable debugging if it's required only for the daemon process. We
+ leave the above message, because it ties up with the "child ended"
+ debugging messages. */
- for (sk = 0; sk < listen_socket_count; sk++)
- (void)close(listen_sockets[sk]);
+ if (debug_daemon) debug_selector = 0;
- /* Reset SIGHUP and SIGCHLD in the child in both cases. */
+ /* Close any open listening sockets in the child */
- signal(SIGHUP, SIG_DFL);
- signal(SIGCHLD, SIG_DFL);
+ for (sk = 0; sk < listen_socket_count; sk++)
+ (void)close(listen_sockets[sk]);
- /* Re-exec if privilege has been given up, unless deliver_drop_
- privilege is set. Reset SIGALRM before exec(). */
+ /* Reset SIGHUP and SIGCHLD in the child in both cases. */
- if (geteuid() != root_uid && !deliver_drop_privilege)
- {
- uschar opt[8];
- uschar *p = opt;
- uschar *extra[4];
- int extracount = 1;
+ signal(SIGHUP, SIG_DFL);
+ signal(SIGCHLD, SIG_DFL);
- signal(SIGALRM, SIG_DFL);
- *p++ = '-';
- *p++ = 'q';
- if (queue_2stage) *p++ = 'q';
- if (queue_run_first_delivery) *p++ = 'i';
- if (queue_run_force) *p++ = 'f';
- if (deliver_force_thaw) *p++ = 'f';
- if (queue_run_local) *p++ = 'l';
- *p = 0;
- extra[0] = opt;
-
- /* If -R or -S were on the original command line, ensure they get
- passed on. */
-
- if (deliver_selectstring != NULL)
- {
- extra[extracount++] = deliver_selectstring_regex? US"-Rr" : US"-R";
- extra[extracount++] = deliver_selectstring;
- }
+ /* Re-exec if privilege has been given up, unless deliver_drop_
+ privilege is set. Reset SIGALRM before exec(). */
- if (deliver_selectstring_sender != NULL)
+ if (geteuid() != root_uid && !deliver_drop_privilege)
{
- extra[extracount++] = deliver_selectstring_sender_regex?
- US"-Sr" : US"-S";
- extra[extracount++] = deliver_selectstring_sender;
+ uschar opt[8];
+ uschar *p = opt;
+ uschar *extra[5];
+ int extracount = 1;
+
+ signal(SIGALRM, SIG_DFL);
+ *p++ = '-';
+ *p++ = 'q';
+ if (queue_2stage) *p++ = 'q';
+ if (queue_run_first_delivery) *p++ = 'i';
+ if (queue_run_force) *p++ = 'f';
+ if (deliver_force_thaw) *p++ = 'f';
+ if (queue_run_local) *p++ = 'l';
+ *p = 0;
+ extra[0] = queue_name
+ ? string_sprintf("%sG%s", opt, queue_name) : opt;
+
+ /* If -R or -S were on the original command line, ensure they get
+ passed on. */
+
+ if (deliver_selectstring)
+ {
+ extra[extracount++] = deliver_selectstring_regex ? US"-Rr" : US"-R";
+ extra[extracount++] = deliver_selectstring;
+ }
+
+ if (deliver_selectstring_sender)
+ {
+ extra[extracount++] = deliver_selectstring_sender_regex
+ ? US"-Sr" : US"-S";
+ extra[extracount++] = deliver_selectstring_sender;
+ }
+
+ /* Overlay this process with a new execution. */
+
+ (void)child_exec_exim(CEE_EXEC_PANIC, FALSE, NULL, TRUE, extracount,
+ extra[0], extra[1], extra[2], extra[3], extra[4]);
+
+ /* Control never returns here. */
}
- /* Overlay this process with a new execution. */
+ /* No need to re-exec; SIGALRM remains set to the default handler */
- (void)child_exec_exim(CEE_EXEC_PANIC, FALSE, NULL, TRUE, extracount,
- extra[0], extra[1], extra[2], extra[3], extra[4]);
-
- /* Control never returns here. */
+ queue_run(NULL, NULL, FALSE);
+ _exit(EXIT_SUCCESS);
}
- /* No need to re-exec; SIGALRM remains set to the default handler */
-
- queue_run(NULL, NULL, FALSE);
- _exit(EXIT_SUCCESS);
- }
-
- if (pid < 0)
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "daemon: fork of queue-runner "
- "process failed: %s", strerror(errno));
- log_close_all();
- }
- else
- {
- int i;
- for (i = 0; i < queue_run_max; ++i)
+ if (pid < 0)
{
- if (queue_pid_slots[i] <= 0)
- {
- queue_pid_slots[i] = pid;
- queue_run_count++;
- break;
- }
+ log_write(0, LOG_MAIN|LOG_PANIC, "daemon: fork of queue-runner "
+ "process failed: %s", strerror(errno));
+ log_close_all();
+ }
+ else
+ {
+ int i;
+ for (i = 0; i < local_queue_run_max; ++i)
+ if (queue_pid_slots[i] <= 0)
+ {
+ queue_pid_slots[i] = pid;
+ queue_run_count++;
+ break;
+ }
+ DEBUG(D_any) debug_printf("%d queue-runner process%s running\n",
+ queue_run_count, (queue_run_count == 1)? "" : "es");
}
- DEBUG(D_any) debug_printf("%d queue-runner process%s running\n",
- queue_run_count, (queue_run_count == 1)? "" : "es");
}
- }
- /* Reset the alarm clock */
+ /* Reset the alarm clock */
- sigalrm_seen = FALSE;
- alarm(queue_interval);
- }
+ sigalrm_seen = FALSE;
+ alarm(queue_interval);
+ }
+
+ } /* sigalrm_seen */
/* Sleep till a connection happens if listening, and handle the connection if
errno = EINTR;
}
else
- {
lcount = select(max_socket + 1, (SELECT_ARG2_TYPE *)&select_listen,
NULL, NULL, NULL);
- }
if (lcount < 0)
{
while (lcount-- > 0)
{
int accept_socket = -1;
+
if (!select_failed)
- {
for (sk = 0; sk < listen_socket_count; sk++)
- {
if (FD_ISSET(listen_sockets[sk], &select_listen))
{
+ len = sizeof(accepted);
accept_socket = accept(listen_sockets[sk],
(struct sockaddr *)&accepted, &len);
FD_CLR(listen_sockets[sk], &select_listen);
break;
}
- }
- }
/* If select or accept has failed and this was not caused by an
interruption, log the incident and try again. With asymmetric TCP/IP
/* If select/accept succeeded, deal with the connection. */
if (accept_socket >= 0)
+ {
+ if (inetd_wait_timeout)
+ last_connection_time = time(NULL);
handle_smtp_call(listen_sockets, listen_socket_count, accept_socket,
(struct sockaddr *)&accepted);
+ }
}
}
/* Control never reaches here */
}
+/* vi: aw ai sw=2
+*/
/* End of exim_daemon.c */
-
projects / exim.git / blobdiff