-/* $Cambridge: exim/src/src/acl.c,v 1.67 2006/11/14 16:40:36 ph10 Exp $ */
-
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2006 */
+/* Copyright (c) University of Cambridge 1995 - 2012 */
/* See the file NOTICE for conditions of use and distribution. */
/* Code for handling Access Control Lists (ACLs) */
ACLC_BMI_OPTIN,
#endif
ACLC_CONDITION,
+ ACLC_CONTINUE,
ACLC_CONTROL,
+#ifdef EXPERIMENTAL_DCC
+ ACLC_DCC,
+#endif
#ifdef WITH_CONTENT_SCAN
ACLC_DECODE,
#endif
#ifdef WITH_OLD_DEMIME
ACLC_DEMIME,
#endif
-#ifdef EXPERIMENTAL_DOMAINKEYS
- ACLC_DK_DOMAIN_SOURCE,
- ACLC_DK_POLICY,
- ACLC_DK_SENDER_DOMAINS,
- ACLC_DK_SENDER_LOCAL_PARTS,
- ACLC_DK_SENDERS,
- ACLC_DK_STATUS,
+#ifndef DISABLE_DKIM
+ ACLC_DKIM_SIGNER,
+ ACLC_DKIM_STATUS,
#endif
ACLC_DNSLISTS,
ACLC_DOMAINS,
#ifdef WITH_CONTENT_SCAN
ACLC_REGEX,
#endif
+ ACLC_REMOVE_HEADER,
ACLC_SENDER_DOMAINS,
ACLC_SENDERS,
ACLC_SET,
#endif
#ifdef EXPERIMENTAL_SPF
ACLC_SPF,
+ ACLC_SPF_GUESS,
#endif
ACLC_VERIFY };
-/* ACL conditions/modifiers: "delay", "control", "endpass", "message",
-"log_message", "log_reject_target", "logwrite", and "set" are modifiers that
-look like conditions but always return TRUE. They are used for their side
-effects. */
+/* ACL conditions/modifiers: "delay", "control", "continue", "endpass",
+"message", "log_message", "log_reject_target", "logwrite", and "set" are
+modifiers that look like conditions but always return TRUE. They are used for
+their side effects. */
static uschar *conditions[] = {
US"acl",
US"bmi_optin",
#endif
US"condition",
+ US"continue",
US"control",
+#ifdef EXPERIMENTAL_DCC
+ US"dcc",
+#endif
#ifdef WITH_CONTENT_SCAN
US"decode",
#endif
#ifdef WITH_OLD_DEMIME
US"demime",
#endif
-#ifdef EXPERIMENTAL_DOMAINKEYS
- US"dk_domain_source",
- US"dk_policy",
- US"dk_sender_domains",
- US"dk_sender_local_parts",
- US"dk_senders",
- US"dk_status",
+#ifndef DISABLE_DKIM
+ US"dkim_signers",
+ US"dkim_status",
#endif
US"dnslists",
US"domains",
#ifdef WITH_CONTENT_SCAN
US"regex",
#endif
+ US"remove_header",
US"sender_domains", US"senders", US"set",
#ifdef WITH_CONTENT_SCAN
US"spam",
#endif
#ifdef EXPERIMENTAL_SPF
US"spf",
+ US"spf_guess",
#endif
US"verify" };
#ifdef EXPERIMENTAL_BRIGHTMAIL
CONTROL_BMI_RUN,
#endif
- #ifdef EXPERIMENTAL_DOMAINKEYS
- CONTROL_DK_VERIFY,
+ CONTROL_DEBUG,
+ #ifndef DISABLE_DKIM
+ CONTROL_DKIM_VERIFY,
#endif
+ CONTROL_DSCP,
CONTROL_ERROR,
CONTROL_CASEFUL_LOCAL_PART,
CONTROL_CASELOWER_LOCAL_PART,
+ CONTROL_CUTTHROUGH_DELIVERY,
CONTROL_ENFORCE_SYNC,
CONTROL_NO_ENFORCE_SYNC,
CONTROL_FREEZE,
#endif
CONTROL_FAKEDEFER,
CONTROL_FAKEREJECT,
- CONTROL_NO_MULTILINE
+ CONTROL_NO_MULTILINE,
+ CONTROL_NO_PIPELINING,
+ CONTROL_NO_DELAY_FLUSH,
+ CONTROL_NO_CALLOUT_FLUSH
};
/* ACL control names; keep in step with the table above! This list is used for
#ifdef EXPERIMENTAL_BRIGHTMAIL
US"bmi_run",
#endif
- #ifdef EXPERIMENTAL_DOMAINKEYS
- US"dk_verify",
+ US"debug",
+ #ifndef DISABLE_DKIM
+ US"dkim_disable_verify",
#endif
+ US"dscp",
US"error",
US"caseful_local_part",
US"caselower_local_part",
+ US"cutthrough_delivery",
US"enforce_sync",
US"no_enforce_sync",
US"freeze",
#ifdef WITH_CONTENT_SCAN
US"no_mbox_unspool",
#endif
- US"no_multiline"
+ US"fakedefer",
+ US"fakereject",
+ US"no_multiline_responses",
+ US"no_pipelining",
+ US"no_delay_flush",
+ US"no_callout_flush"
};
-/* Flags to indicate for which conditions /modifiers a string expansion is done
+/* Flags to indicate for which conditions/modifiers a string expansion is done
at the outer level. In the other cases, expansion already occurs in the
checking functions. */
static uschar cond_expand_at_top[] = {
- TRUE, /* acl */
+ FALSE, /* acl */
TRUE, /* add_header */
FALSE, /* authenticated */
#ifdef EXPERIMENTAL_BRIGHTMAIL
TRUE, /* bmi_optin */
#endif
TRUE, /* condition */
+ TRUE, /* continue */
TRUE, /* control */
+#ifdef EXPERIMENTAL_DCC
+ TRUE, /* dcc */
+#endif
#ifdef WITH_CONTENT_SCAN
TRUE, /* decode */
#endif
#ifdef WITH_OLD_DEMIME
TRUE, /* demime */
#endif
-#ifdef EXPERIMENTAL_DOMAINKEYS
- TRUE, /* dk_domain_source */
- TRUE, /* dk_policy */
- TRUE, /* dk_sender_domains */
- TRUE, /* dk_sender_local_parts */
- TRUE, /* dk_senders */
- TRUE, /* dk_status */
+#ifndef DISABLE_DKIM
+ TRUE, /* dkim_signers */
+ TRUE, /* dkim_status */
#endif
TRUE, /* dnslists */
FALSE, /* domains */
#ifdef WITH_CONTENT_SCAN
TRUE, /* regex */
#endif
+ TRUE, /* remove_header */
FALSE, /* sender_domains */
FALSE, /* senders */
TRUE, /* set */
#endif
#ifdef EXPERIMENTAL_SPF
TRUE, /* spf */
+ TRUE, /* spf_guess */
#endif
TRUE /* verify */
};
TRUE, /* bmi_optin */
#endif
FALSE, /* condition */
+ TRUE, /* continue */
TRUE, /* control */
+#ifdef EXPERIMENTAL_DCC
+ FALSE, /* dcc */
+#endif
#ifdef WITH_CONTENT_SCAN
FALSE, /* decode */
#endif
#ifdef WITH_OLD_DEMIME
FALSE, /* demime */
#endif
-#ifdef EXPERIMENTAL_DOMAINKEYS
- FALSE, /* dk_domain_source */
- FALSE, /* dk_policy */
- FALSE, /* dk_sender_domains */
- FALSE, /* dk_sender_local_parts */
- FALSE, /* dk_senders */
- FALSE, /* dk_status */
+#ifndef DISABLE_DKIM
+ FALSE, /* dkim_signers */
+ FALSE, /* dkim_status */
#endif
FALSE, /* dnslists */
FALSE, /* domains */
#ifdef WITH_CONTENT_SCAN
FALSE, /* regex */
#endif
+ TRUE, /* remove_header */
FALSE, /* sender_domains */
FALSE, /* senders */
TRUE, /* set */
#endif
#ifdef EXPERIMENTAL_SPF
FALSE, /* spf */
+ FALSE, /* spf_guess */
#endif
FALSE /* verify */
};
-/* Bit map vector of which conditions are not allowed at certain times. For
-each condition, there's a bitmap of dis-allowed times. For some, it is easier
-to specify the negation of a small number of allowed times. */
+/* Bit map vector of which conditions and modifiers are not allowed at certain
+times. For each condition and modifier, there's a bitmap of dis-allowed times.
+For some, it is easier to specify the negation of a small number of allowed
+times. */
static unsigned int cond_forbids[] = {
0, /* acl */
~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* add_header */
(1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
(1<<ACL_WHERE_MIME)|(1<<ACL_WHERE_NOTSMTP)|
+ (1<<ACL_WHERE_DKIM)|
(1<<ACL_WHERE_NOTSMTP_START)),
(1<<ACL_WHERE_NOTSMTP)| /* authenticated */
0, /* condition */
+ 0, /* continue */
+
/* Certain types of control are always allowed, so we let it through
always and check in the control processing itself. */
0, /* control */
+ #ifdef EXPERIMENTAL_DCC
+ (unsigned int)
+ ~((1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP)), /* dcc */
+ #endif
+
#ifdef WITH_CONTENT_SCAN
(unsigned int)
~(1<<ACL_WHERE_MIME), /* decode */
#endif
- 0, /* delay */
+ (1<<ACL_WHERE_NOTQUIT), /* delay */
#ifdef WITH_OLD_DEMIME
(unsigned int)
~((1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP)), /* demime */
#endif
- #ifdef EXPERIMENTAL_DOMAINKEYS
- (1<<ACL_WHERE_AUTH)| /* dk_domain_source */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_RCPT)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_NOTSMTP_START),
-
- (1<<ACL_WHERE_AUTH)| /* dk_policy */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_RCPT)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_NOTSMTP_START),
-
- (1<<ACL_WHERE_AUTH)| /* dk_sender_domains */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_RCPT)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_NOTSMTP_START),
-
- (1<<ACL_WHERE_AUTH)| /* dk_sender_local_parts */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_RCPT)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_NOTSMTP_START),
-
- (1<<ACL_WHERE_AUTH)| /* dk_senders */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_RCPT)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_NOTSMTP_START),
+ #ifndef DISABLE_DKIM
+ (unsigned int)
+ ~(1<<ACL_WHERE_DKIM), /* dkim_signers */
- (1<<ACL_WHERE_AUTH)| /* dk_status */
- (1<<ACL_WHERE_CONNECT)|(1<<ACL_WHERE_HELO)|
- (1<<ACL_WHERE_RCPT)|(1<<ACL_WHERE_PREDATA)|
- (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
- (1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
- (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_STARTTLS)|
- (1<<ACL_WHERE_VRFY)|(1<<ACL_WHERE_NOTSMTP_START),
+ (unsigned int)
+ ~(1<<ACL_WHERE_DKIM), /* dkim_status */
#endif
(1<<ACL_WHERE_NOTSMTP)| /* dnslists */
(1<<ACL_WHERE_MIME)),
#endif
+ (unsigned int)
+ ~((1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)| /* remove_header */
+ (1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|
+ (1<<ACL_WHERE_MIME)|(1<<ACL_WHERE_NOTSMTP)|
+ (1<<ACL_WHERE_NOTSMTP_START)),
+
(1<<ACL_WHERE_AUTH)|(1<<ACL_WHERE_CONNECT)| /* sender_domains */
(1<<ACL_WHERE_HELO)|
(1<<ACL_WHERE_MAILAUTH)|(1<<ACL_WHERE_QUIT)|
(1<<ACL_WHERE_STARTTLS)|(1<<ACL_WHERE_VRFY)|
(1<<ACL_WHERE_NOTSMTP)|
(1<<ACL_WHERE_NOTSMTP_START),
+
+ (1<<ACL_WHERE_AUTH)|(1<<ACL_WHERE_CONNECT)| /* spf_guess */
+ (1<<ACL_WHERE_HELO)|
+ (1<<ACL_WHERE_MAILAUTH)|
+ (1<<ACL_WHERE_ETRN)|(1<<ACL_WHERE_EXPN)|
+ (1<<ACL_WHERE_STARTTLS)|(1<<ACL_WHERE_VRFY)|
+ (1<<ACL_WHERE_NOTSMTP)|
+ (1<<ACL_WHERE_NOTSMTP_START),
#endif
/* Certain types of verify are always allowed, so we let it through
0, /* bmi_run */
#endif
- #ifdef EXPERIMENTAL_DOMAINKEYS
- (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP)| /* dk_verify */
+ 0, /* debug */
+
+ #ifndef DISABLE_DKIM
+ (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP)| /* dkim_disable_verify */
(1<<ACL_WHERE_NOTSMTP_START),
#endif
+ (1<<ACL_WHERE_NOTSMTP)|
+ (1<<ACL_WHERE_NOTSMTP_START)|
+ (1<<ACL_WHERE_NOTQUIT), /* dscp */
+
0, /* error */
(unsigned int)
(unsigned int)
~(1<<ACL_WHERE_RCPT), /* caselower_local_part */
+ (unsigned int)
+ 0, /* cutthrough_delivery */
+
(1<<ACL_WHERE_NOTSMTP)| /* enforce_sync */
(1<<ACL_WHERE_NOTSMTP_START),
(1<<ACL_WHERE_MIME)),
(1<<ACL_WHERE_NOTSMTP)| /* no_multiline */
+ (1<<ACL_WHERE_NOTSMTP_START),
+
+ (1<<ACL_WHERE_NOTSMTP)| /* no_pipelining */
+ (1<<ACL_WHERE_NOTSMTP_START),
+
+ (1<<ACL_WHERE_NOTSMTP)| /* no_delay_flush */
+ (1<<ACL_WHERE_NOTSMTP_START),
+
+ (1<<ACL_WHERE_NOTSMTP)| /* no_callout_flush */
(1<<ACL_WHERE_NOTSMTP_START)
};
#ifdef EXPERIMENTAL_BRIGHTMAIL
{ US"bmi_run", CONTROL_BMI_RUN, FALSE },
#endif
-#ifdef EXPERIMENTAL_DOMAINKEYS
- { US"dk_verify", CONTROL_DK_VERIFY, FALSE },
+ { US"debug", CONTROL_DEBUG, TRUE },
+#ifndef DISABLE_DKIM
+ { US"dkim_disable_verify", CONTROL_DKIM_VERIFY, FALSE },
#endif
+ { US"dscp", CONTROL_DSCP, TRUE },
{ US"caseful_local_part", CONTROL_CASEFUL_LOCAL_PART, FALSE },
{ US"caselower_local_part", CONTROL_CASELOWER_LOCAL_PART, FALSE },
{ US"enforce_sync", CONTROL_ENFORCE_SYNC, FALSE },
{ US"freeze", CONTROL_FREEZE, TRUE },
+ { US"no_callout_flush", CONTROL_NO_CALLOUT_FLUSH, FALSE },
+ { US"no_delay_flush", CONTROL_NO_DELAY_FLUSH, FALSE },
{ US"no_enforce_sync", CONTROL_NO_ENFORCE_SYNC, FALSE },
{ US"no_multiline_responses", CONTROL_NO_MULTILINE, FALSE },
+ { US"no_pipelining", CONTROL_NO_PIPELINING, FALSE },
{ US"queue_only", CONTROL_QUEUE_ONLY, FALSE },
#ifdef WITH_CONTENT_SCAN
{ US"no_mbox_unspool", CONTROL_NO_MBOX_UNSPOOL, FALSE },
{ US"fakedefer", CONTROL_FAKEDEFER, TRUE },
{ US"fakereject", CONTROL_FAKEREJECT, TRUE },
{ US"submission", CONTROL_SUBMISSION, TRUE },
- { US"suppress_local_fixups", CONTROL_SUPPRESS_LOCAL_FIXUPS, FALSE }
+ { US"suppress_local_fixups", CONTROL_SUPPRESS_LOCAL_FIXUPS, FALSE },
+ { US"cutthrough_delivery", CONTROL_CUTTHROUGH_DELIVERY, FALSE }
};
/* Support data structures for Client SMTP Authorization. acl_verify_csa()
US"failed (client address mismatch)"
};
+/* Options for the ratelimit condition. Note that there are two variants of
+the per_rcpt option, depending on the ACL that is used to measure the rate.
+However any ACL must be able to look up per_rcpt rates in /noupdate mode,
+so the two variants must have the same internal representation as well as
+the same configuration string. */
+
+enum {
+ RATE_PER_WHAT, RATE_PER_CLASH, RATE_PER_ADDR, RATE_PER_BYTE, RATE_PER_CMD,
+ RATE_PER_CONN, RATE_PER_MAIL, RATE_PER_RCPT, RATE_PER_ALLRCPTS
+};
+
+#define RATE_SET(var,new) \
+ (((var) == RATE_PER_WHAT) ? ((var) = RATE_##new) : ((var) = RATE_PER_CLASH))
+
+static uschar *ratelimit_option_string[] = {
+ US"?", US"!", US"per_addr", US"per_byte", US"per_cmd",
+ US"per_conn", US"per_mail", US"per_rcpt", US"per_rcpt"
+};
+
/* Enable recursion between acl_check_internal() and acl_check_condition() */
-static int acl_check_internal(int, address_item *, uschar *, int, uschar **,
- uschar **);
+static int acl_check_wargs(int, address_item *, uschar *, int, uschar **,
+ uschar **);
/*************************************************
uschar *p, *q;
int hlen = Ustrlen(hstring);
-/* An empty string does nothing; otherwise add a final newline if necessary. */
+/* Ignore any leading newlines */
+while (*hstring == '\n') hstring++, hlen--;
+/* An empty string does nothing; ensure exactly one final newline. */
if (hlen <= 0) return;
-if (hstring[hlen-1] != '\n') hstring = string_sprintf("%s\n", hstring);
+if (hstring[--hlen] != '\n') hstring = string_sprintf("%s\n", hstring);
+else while(hstring[--hlen] == '\n') hstring[hlen+1] = '\0';
/* Loop for multiple header lines, taking care about continuations */
if (*s == ':' || !isgraph(*s)) break;
}
- s = string_sprintf("%s%.*s", (*s == ':')? "" : "X-ACL-Warn: ", q - p, p);
+ s = string_sprintf("%s%.*s", (*s == ':')? "" : "X-ACL-Warn: ", (int) (q - p), p);
hlen = Ustrlen(s);
/* See if this line has already been added */
+/*************************************************
+* List the added header lines *
+*************************************************/
+uschar *
+fn_hdrs_added(void)
+{
+uschar * ret = NULL;
+header_line * h = acl_added_headers;
+uschar * s;
+uschar * cp;
+int size = 0;
+int ptr = 0;
+
+if (!h) return NULL;
+
+do
+ {
+ s = h->text;
+ while ((cp = Ustrchr(s, '\n')) != NULL)
+ {
+ if (cp[1] == '\0') break;
+
+ /* contains embedded newline; needs doubling */
+ ret = string_cat(ret, &size, &ptr, s, cp-s+1);
+ ret = string_cat(ret, &size, &ptr, US"\n", 1);
+ s = cp+1;
+ }
+ /* last bit of header */
+
+ ret = string_cat(ret, &size, &ptr, s, cp-s+1); /* newline-sep list */
+ }
+while((h = h->next));
+
+ret[ptr-1] = '\0'; /* overwrite last newline */
+return ret;
+}
+
+
+/*************************************************
+* Set up removed header line(s) *
+*************************************************/
+
+/* This function is called by the remove_header modifier. The argument is
+treated as a sequence of header names which are added to a colon separated
+list, provided there isn't an identical one already there.
+
+Argument: string of header names
+Returns: nothing
+*/
+
+static void
+setup_remove_header(uschar *hnames)
+{
+if (*hnames != 0)
+ {
+ if (acl_removed_headers == NULL)
+ acl_removed_headers = hnames;
+ else
+ acl_removed_headers = string_sprintf("%s : %s", acl_removed_headers, hnames);
+ }
+}
+
+
/*************************************************
* Handle warnings *
* Handle verification (address & other) *
*************************************************/
+enum { VERIFY_REV_HOST_LKUP, VERIFY_CERT, VERIFY_HELO, VERIFY_CSA, VERIFY_HDR_SYNTAX,
+ VERIFY_NOT_BLIND, VERIFY_HDR_SNDR, VERIFY_SNDR, VERIFY_RCPT
+ };
+typedef struct {
+ uschar * name;
+ int value;
+ unsigned where_allowed; /* bitmap */
+ BOOL no_options; /* Never has /option(s) following */
+ unsigned alt_opt_sep; /* >0 Non-/ option separator (custom parser) */
+ } verify_type_t;
+static verify_type_t verify_type_list[] = {
+ { US"reverse_host_lookup", VERIFY_REV_HOST_LKUP, ~0, TRUE, 0 },
+ { US"certificate", VERIFY_CERT, ~0, TRUE, 0 },
+ { US"helo", VERIFY_HELO, ~0, TRUE, 0 },
+ { US"csa", VERIFY_CSA, ~0, FALSE, 0 },
+ { US"header_syntax", VERIFY_HDR_SYNTAX, (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP), TRUE, 0 },
+ { US"not_blind", VERIFY_NOT_BLIND, (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP), TRUE, 0 },
+ { US"header_sender", VERIFY_HDR_SNDR, (1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP), FALSE, 0 },
+ { US"sender", VERIFY_SNDR, (1<<ACL_WHERE_MAIL)|(1<<ACL_WHERE_RCPT)
+ |(1<<ACL_WHERE_PREDATA)|(1<<ACL_WHERE_DATA)|(1<<ACL_WHERE_NOTSMTP),
+ FALSE, 6 },
+ { US"recipient", VERIFY_RCPT, (1<<ACL_WHERE_RCPT), FALSE, 0 }
+ };
+
+
+enum { CALLOUT_DEFER_OK, CALLOUT_NOCACHE, CALLOUT_RANDOM, CALLOUT_USE_SENDER,
+ CALLOUT_USE_POSTMASTER, CALLOUT_POSTMASTER, CALLOUT_FULLPOSTMASTER,
+ CALLOUT_MAILFROM, CALLOUT_POSTMASTER_MAILFROM, CALLOUT_MAXWAIT, CALLOUT_CONNECT,
+ CALLOUT_TIME
+ };
+typedef struct {
+ uschar * name;
+ int value;
+ int flag;
+ BOOL has_option; /* Has =option(s) following */
+ BOOL timeval; /* Has a time value */
+ } callout_opt_t;
+static callout_opt_t callout_opt_list[] = {
+ { US"defer_ok", CALLOUT_DEFER_OK, 0, FALSE, FALSE },
+ { US"no_cache", CALLOUT_NOCACHE, vopt_callout_no_cache, FALSE, FALSE },
+ { US"random", CALLOUT_RANDOM, vopt_callout_random, FALSE, FALSE },
+ { US"use_sender", CALLOUT_USE_SENDER, vopt_callout_recipsender, FALSE, FALSE },
+ { US"use_postmaster", CALLOUT_USE_POSTMASTER,vopt_callout_recippmaster, FALSE, FALSE },
+ { US"postmaster_mailfrom",CALLOUT_POSTMASTER_MAILFROM,0, TRUE, FALSE },
+ { US"postmaster", CALLOUT_POSTMASTER, 0, FALSE, FALSE },
+ { US"fullpostmaster", CALLOUT_FULLPOSTMASTER,vopt_callout_fullpm, FALSE, FALSE },
+ { US"mailfrom", CALLOUT_MAILFROM, 0, TRUE, FALSE },
+ { US"maxwait", CALLOUT_MAXWAIT, 0, TRUE, TRUE },
+ { US"connect", CALLOUT_CONNECT, 0, TRUE, TRUE },
+ { NULL, CALLOUT_TIME, 0, FALSE, TRUE }
+ };
+
+
+
/* This function implements the "verify" condition. It is called when
encountered in any ACL, because some tests are almost always permitted. Some
just don't make sense, and always fail (for example, an attempt to test a host
uschar *se_mailfrom = NULL;
/* Some of the verify items have slash-separated options; some do not. Diagnose
-an error if options are given for items that don't expect them. This code has
-now got very message. Refactoring to use a table would be a good idea one day.
+an error if options are given for items that don't expect them.
*/
uschar *slash = Ustrchr(arg, '/');
uschar *list = arg;
uschar *ss = string_nextinlist(&list, &sep, big_buffer, big_buffer_size);
+verify_type_t * vp;
if (ss == NULL) goto BAD_VERIFY;
/* Handle name/address consistency verification in a separate function. */
-if (strcmpic(ss, US"reverse_host_lookup") == 0)
+for (vp= verify_type_list;
+ (char *)vp < (char *)verify_type_list + sizeof(verify_type_list);
+ vp++
+ )
+ if (vp->alt_opt_sep ? strncmpic(ss, vp->name, vp->alt_opt_sep) == 0
+ : strcmpic (ss, vp->name) == 0)
+ break;
+if ((char *)vp >= (char *)verify_type_list + sizeof(verify_type_list))
+ goto BAD_VERIFY;
+
+if (vp->no_options && slash != NULL)
{
- if (slash != NULL) goto NO_OPTIONS;
- if (sender_host_address == NULL) return OK;
- return acl_verify_reverse(user_msgptr, log_msgptr);
+ *log_msgptr = string_sprintf("unexpected '/' found in \"%s\" "
+ "(this verify item has no options)", arg);
+ return ERROR;
}
-
-/* TLS certificate verification is done at STARTTLS time; here we just
-test whether it was successful or not. (This is for optional verification; for
-mandatory verification, the connection doesn't last this long.) */
-
-if (strcmpic(ss, US"certificate") == 0)
+if (!(vp->where_allowed & (1<<where)))
{
- if (slash != NULL) goto NO_OPTIONS;
- if (tls_certificate_verified) return OK;
- *user_msgptr = US"no verified certificate";
- return FAIL;
+ *log_msgptr = string_sprintf("cannot verify %s in ACL for %s", vp->name, acl_wherenames[where]);
+ return ERROR;
}
-
-/* We can test the result of optional HELO verification that might have
-occurred earlier. If not, we can attempt the verification now. */
-
-if (strcmpic(ss, US"helo") == 0)
+switch(vp->value)
{
- if (slash != NULL) goto NO_OPTIONS;
- if (!helo_verified && !helo_verify_failed) smtp_verify_helo();
- return helo_verified? OK : FAIL;
- }
+ case VERIFY_REV_HOST_LKUP:
+ if (sender_host_address == NULL) return OK;
+ return acl_verify_reverse(user_msgptr, log_msgptr);
-/* Do Client SMTP Authorization checks in a separate function, and turn the
-result code into user-friendly strings. */
+ case VERIFY_CERT:
+ /* TLS certificate verification is done at STARTTLS time; here we just
+ test whether it was successful or not. (This is for optional verification; for
+ mandatory verification, the connection doesn't last this long.) */
-if (strcmpic(ss, US"csa") == 0)
- {
- rc = acl_verify_csa(list);
- *log_msgptr = *user_msgptr = string_sprintf("client SMTP authorization %s",
- csa_reason_string[rc]);
- csa_status = csa_status_string[rc];
- DEBUG(D_acl) debug_printf("CSA result %s\n", csa_status);
- return csa_return_code[rc];
- }
+ if (tls_in.certificate_verified) return OK;
+ *user_msgptr = US"no verified certificate";
+ return FAIL;
-/* Check that all relevant header lines have the correct syntax. If there is
-a syntax error, we return details of the error to the sender if configured to
-send out full details. (But a "message" setting on the ACL can override, as
-always). */
+ case VERIFY_HELO:
+ /* We can test the result of optional HELO verification that might have
+ occurred earlier. If not, we can attempt the verification now. */
-if (strcmpic(ss, US"header_syntax") == 0)
- {
- if (slash != NULL) goto NO_OPTIONS;
- if (where != ACL_WHERE_DATA && where != ACL_WHERE_NOTSMTP) goto WRONG_ACL;
- rc = verify_check_headers(log_msgptr);
- if (rc != OK && smtp_return_error_details && *log_msgptr != NULL)
- *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
- return rc;
- }
+ if (!helo_verified && !helo_verify_failed) smtp_verify_helo();
+ return helo_verified? OK : FAIL;
-/* Check that no recipient of this message is "blind", that is, every envelope
-recipient must be mentioned in either To: or Cc:. */
+ case VERIFY_CSA:
+ /* Do Client SMTP Authorization checks in a separate function, and turn the
+ result code into user-friendly strings. */
-if (strcmpic(ss, US"not_blind") == 0)
- {
- if (slash != NULL) goto NO_OPTIONS;
- if (where != ACL_WHERE_DATA && where != ACL_WHERE_NOTSMTP) goto WRONG_ACL;
- rc = verify_check_notblind();
- if (rc != OK)
- {
- *log_msgptr = string_sprintf("bcc recipient detected");
- if (smtp_return_error_details)
+ rc = acl_verify_csa(list);
+ *log_msgptr = *user_msgptr = string_sprintf("client SMTP authorization %s",
+ csa_reason_string[rc]);
+ csa_status = csa_status_string[rc];
+ DEBUG(D_acl) debug_printf("CSA result %s\n", csa_status);
+ return csa_return_code[rc];
+
+ case VERIFY_HDR_SYNTAX:
+ /* Check that all relevant header lines have the correct syntax. If there is
+ a syntax error, we return details of the error to the sender if configured to
+ send out full details. (But a "message" setting on the ACL can override, as
+ always). */
+
+ rc = verify_check_headers(log_msgptr);
+ if (rc != OK && smtp_return_error_details && *log_msgptr != NULL)
*user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
- }
- return rc;
- }
-
-/* The remaining verification tests check recipient and sender addresses,
-either from the envelope or from the header. There are a number of
-slash-separated options that are common to all of them. */
+ return rc;
+ case VERIFY_NOT_BLIND:
+ /* Check that no recipient of this message is "blind", that is, every envelope
+ recipient must be mentioned in either To: or Cc:. */
-/* Check that there is at least one verifiable sender address in the relevant
-header lines. This can be followed by callout and defer options, just like
-sender and recipient. */
+ rc = verify_check_notblind();
+ if (rc != OK)
+ {
+ *log_msgptr = string_sprintf("bcc recipient detected");
+ if (smtp_return_error_details)
+ *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
+ }
+ return rc;
-if (strcmpic(ss, US"header_sender") == 0)
- {
- if (where != ACL_WHERE_DATA && where != ACL_WHERE_NOTSMTP) goto WRONG_ACL;
- verify_header_sender = TRUE;
- }
+ /* The remaining verification tests check recipient and sender addresses,
+ either from the envelope or from the header. There are a number of
+ slash-separated options that are common to all of them. */
-/* Otherwise, first item in verify argument must be "sender" or "recipient".
-In the case of a sender, this can optionally be followed by an address to use
-in place of the actual sender (rare special-case requirement). */
+ case VERIFY_HDR_SNDR:
+ verify_header_sender = TRUE;
+ break;
-else if (strncmpic(ss, US"sender", 6) == 0)
- {
- uschar *s = ss + 6;
- if (where > ACL_WHERE_NOTSMTP)
- {
- *log_msgptr = string_sprintf("cannot verify sender in ACL for %s "
- "(only possible for MAIL, RCPT, PREDATA, or DATA)",
- acl_wherenames[where]);
- return ERROR;
- }
- if (*s == 0)
- verify_sender_address = sender_address;
- else
- {
- while (isspace(*s)) s++;
- if (*s++ != '=') goto BAD_VERIFY;
- while (isspace(*s)) s++;
- verify_sender_address = string_copy(s);
- }
- }
-else
- {
- if (strcmpic(ss, US"recipient") != 0) goto BAD_VERIFY;
- if (addr == NULL)
+ case VERIFY_SNDR:
+ /* In the case of a sender, this can optionally be followed by an address to use
+ in place of the actual sender (rare special-case requirement). */
{
- *log_msgptr = string_sprintf("cannot verify recipient in ACL for %s "
- "(only possible for RCPT)", acl_wherenames[where]);
- return ERROR;
+ uschar *s = ss + 6;
+ if (*s == 0)
+ verify_sender_address = sender_address;
+ else
+ {
+ while (isspace(*s)) s++;
+ if (*s++ != '=') goto BAD_VERIFY;
+ while (isspace(*s)) s++;
+ verify_sender_address = string_copy(s);
+ }
}
+ break;
+
+ case VERIFY_RCPT:
+ break;
}
+
+
/* Remaining items are optional; they apply to sender and recipient
verification, including "header sender" verification. */
uschar buffer[256];
while (isspace(*ss)) ss++;
- /* This callout option handling code has become a mess as new options
- have been added in an ad hoc manner. It should be tidied up into some
- kind of table-driven thing. */
-
while ((opt = string_nextinlist(&ss, &optsep, buffer, sizeof(buffer)))
!= NULL)
{
- if (strcmpic(opt, US"defer_ok") == 0) callout_defer_ok = TRUE;
- else if (strcmpic(opt, US"no_cache") == 0)
- verify_options |= vopt_callout_no_cache;
- else if (strcmpic(opt, US"random") == 0)
- verify_options |= vopt_callout_random;
- else if (strcmpic(opt, US"use_sender") == 0)
- verify_options |= vopt_callout_recipsender;
- else if (strcmpic(opt, US"use_postmaster") == 0)
- verify_options |= vopt_callout_recippmaster;
- else if (strcmpic(opt, US"postmaster") == 0) pm_mailfrom = US"";
- else if (strcmpic(opt, US"fullpostmaster") == 0)
- {
- pm_mailfrom = US"";
- verify_options |= vopt_callout_fullpm;
- }
+ callout_opt_t * op;
+ double period = 1.0F;
- else if (strncmpic(opt, US"mailfrom", 8) == 0)
- {
- if (!verify_header_sender)
- {
- *log_msgptr = string_sprintf("\"mailfrom\" is allowed as a "
- "callout option only for verify=header_sender (detected in ACL "
- "condition \"%s\")", arg);
- return ERROR;
- }
- opt += 8;
- while (isspace(*opt)) opt++;
- if (*opt++ != '=')
- {
- *log_msgptr = string_sprintf("'=' expected after "
- "\"mailfrom\" in ACL condition \"%s\"", arg);
- return ERROR;
- }
- while (isspace(*opt)) opt++;
- se_mailfrom = string_copy(opt);
- }
+ for (op= callout_opt_list; op->name; op++)
+ if (strncmpic(opt, op->name, Ustrlen(op->name)) == 0)
+ break;
- else if (strncmpic(opt, US"postmaster_mailfrom", 19) == 0)
- {
- opt += 19;
+ verify_options |= op->flag;
+ if (op->has_option)
+ {
+ opt += Ustrlen(op->name);
while (isspace(*opt)) opt++;
if (*opt++ != '=')
{
*log_msgptr = string_sprintf("'=' expected after "
- "\"postmaster_mailfrom\" in ACL condition \"%s\"", arg);
- return ERROR;
- }
- while (isspace(*opt)) opt++;
- pm_mailfrom = string_copy(opt);
- }
-
- else if (strncmpic(opt, US"maxwait", 7) == 0)
- {
- opt += 7;
- while (isspace(*opt)) opt++;
- if (*opt++ != '=')
- {
- *log_msgptr = string_sprintf("'=' expected after \"maxwait\" in "
- "ACL condition \"%s\"", arg);
+ "\"%s\" in ACL verify condition \"%s\"", op->name, arg);
return ERROR;
}
while (isspace(*opt)) opt++;
- callout_overall = readconf_readtime(opt, 0, FALSE);
- if (callout_overall < 0)
+ }
+ if (op->timeval)
+ {
+ period = readconf_readtime(opt, 0, FALSE);
+ if (period < 0)
{
*log_msgptr = string_sprintf("bad time value in ACL condition "
"\"verify %s\"", arg);
return ERROR;
}
- }
- else if (strncmpic(opt, US"connect", 7) == 0)
- {
- opt += 7;
- while (isspace(*opt)) opt++;
- if (*opt++ != '=')
- {
- *log_msgptr = string_sprintf("'=' expected after "
- "\"callout_overaall\" in ACL condition \"%s\"", arg);
- return ERROR;
- }
- while (isspace(*opt)) opt++;
- callout_connect = readconf_readtime(opt, 0, FALSE);
- if (callout_connect < 0)
- {
- *log_msgptr = string_sprintf("bad time value in ACL condition "
- "\"verify %s\"", arg);
- return ERROR;
- }
- }
- else /* Plain time is callout connect/command timeout */
- {
- callout = readconf_readtime(opt, 0, FALSE);
- if (callout < 0)
- {
- *log_msgptr = string_sprintf("bad time value in ACL condition "
- "\"verify %s\"", arg);
- return ERROR;
- }
- }
+ }
+
+ switch(op->value)
+ {
+ case CALLOUT_DEFER_OK: callout_defer_ok = TRUE; break;
+ case CALLOUT_POSTMASTER: pm_mailfrom = US""; break;
+ case CALLOUT_FULLPOSTMASTER: pm_mailfrom = US""; break;
+ case CALLOUT_MAILFROM:
+ if (!verify_header_sender)
+ {
+ *log_msgptr = string_sprintf("\"mailfrom\" is allowed as a "
+ "callout option only for verify=header_sender (detected in ACL "
+ "condition \"%s\")", arg);
+ return ERROR;
+ }
+ se_mailfrom = string_copy(opt);
+ break;
+ case CALLOUT_POSTMASTER_MAILFROM: pm_mailfrom = string_copy(opt); break;
+ case CALLOUT_MAXWAIT: callout_overall = period; break;
+ case CALLOUT_CONNECT: callout_connect = period; break;
+ case CALLOUT_TIME: callout = period; break;
+ }
}
}
else
callout_overall, callout_connect, se_mailfrom, pm_mailfrom, NULL);
HDEBUG(D_acl) debug_printf("----------- end verify ------------\n");
+ *basic_errno = addr2.basic_errno;
*log_msgptr = addr2.message;
*user_msgptr = (addr2.user_message != NULL)?
addr2.user_message : addr2.message;
- *basic_errno = addr2.basic_errno;
+
+ /* Allow details for temporary error if the address is so flagged. */
+ if (testflag((&addr2), af_pass_message)) acl_temp_details = TRUE;
/* Make $address_data visible */
deliver_address_data = addr2.p.address_data;
"\"reverse_host_lookup\" at start of ACL condition "
"\"verify %s\"", arg);
return ERROR;
-
-/* Options supplied when not allowed come here */
-
-NO_OPTIONS:
-*log_msgptr = string_sprintf("unexpected '/' found in \"%s\" "
- "(this verify item has no options)", arg);
-return ERROR;
-
-/* Calls in the wrong ACL come here */
-
-WRONG_ACL:
-*log_msgptr = string_sprintf("cannot check header contents in ACL for %s "
- "(only possible in ACL for DATA)", acl_wherenames[where]);
-return ERROR;
}
+
+/*************************************************
+* Return a ratelimit error *
+*************************************************/
+
+/* Called from acl_ratelimit() below
+
+Arguments:
+ log_msgptr for error messages
+ format format string
+ ... supplementary arguments
+ ss ratelimit option name
+ where ACL_WHERE_xxxx indicating which ACL this is
+
+Returns: ERROR
+*/
+
+static int
+ratelimit_error(uschar **log_msgptr, const char *format, ...)
+{
+va_list ap;
+uschar buffer[STRING_SPRINTF_BUFFER_SIZE];
+va_start(ap, format);
+if (!string_vformat(buffer, sizeof(buffer), format, ap))
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE,
+ "string_sprintf expansion was longer than " SIZE_T_FMT, sizeof(buffer));
+va_end(ap);
+*log_msgptr = string_sprintf(
+ "error in arguments to \"ratelimit\" condition: %s", buffer);
+return ERROR;
+}
+
+
+
+
/*************************************************
* Handle rate limiting *
*************************************************/
static int
acl_ratelimit(uschar *arg, int where, uschar **log_msgptr)
{
-double limit, period;
-uschar *ss, *key;
+double limit, period, count;
+uschar *ss;
+uschar *key = NULL;
+uschar *unique = NULL;
int sep = '/';
-BOOL have_key = FALSE, leaky = FALSE, strict = FALSE;
-BOOL per_byte = FALSE, per_cmd = FALSE, per_conn = FALSE, per_mail = FALSE;
+BOOL leaky = FALSE, strict = FALSE, readonly = FALSE;
+BOOL noupdate = FALSE, badacl = FALSE;
+int mode = RATE_PER_WHAT;
int old_pool, rc;
tree_node **anchor, *t;
open_db dbblock, *dbm;
+int dbdb_size;
dbdata_ratelimit *dbd;
+dbdata_ratelimit_unique *dbdb;
struct timeval tv;
/* Parse the first two options and record their values in expansion
variables. These variables allow the configuration to have informative
error messages based on rate limits obtained from a table lookup. */
-/* First is the maximum number of messages per period and maximum burst
+/* First is the maximum number of messages per period / maximum burst
size, which must be greater than or equal to zero. Zero is useful for
rate measurement as opposed to rate limiting. */
else if (tolower(*ss) == 'm') { limit *= 1024.0*1024.0; ss++; }
else if (tolower(*ss) == 'g') { limit *= 1024.0*1024.0*1024.0; ss++; }
}
-if (limit < 0.0 || *ss != 0)
- {
- *log_msgptr = string_sprintf("syntax error in argument for "
- "\"ratelimit\" condition: \"%s\" is not a positive number",
- sender_rate_limit);
- return ERROR;
- }
-
-/* We use the rest of the argument list following the limit as the
-lookup key, because it doesn't make sense to use the same stored data
-if the period or options are different. */
-
-key = arg;
+if (limit < 0.0 || *ss != '\0')
+ return ratelimit_error(log_msgptr,
+ "\"%s\" is not a positive number", sender_rate_limit);
-/* Second is the rate measurement period and exponential smoothing time
+/* Second is the rate measurement period / exponential smoothing time
constant. This must be strictly greater than zero, because zero leads to
run-time division errors. */
if (sender_rate_period == NULL) period = -1.0;
else period = readconf_readtime(sender_rate_period, 0, FALSE);
if (period <= 0.0)
- {
- *log_msgptr = string_sprintf("syntax error in argument for "
- "\"ratelimit\" condition: \"%s\" is not a time value",
- sender_rate_period);
- return ERROR;
- }
+ return ratelimit_error(log_msgptr,
+ "\"%s\" is not a time value", sender_rate_period);
+
+/* By default we are counting one of something, but the per_rcpt,
+per_byte, and count options can change this. */
-/* Parse the other options. Should we check if the per_* options are being
-used in ACLs where they don't make sense, e.g. per_mail in the connect ACL? */
+count = 1.0;
+
+/* Parse the other options. */
while ((ss = string_nextinlist(&arg, &sep, big_buffer, big_buffer_size))
!= NULL)
{
if (strcmpic(ss, US"leaky") == 0) leaky = TRUE;
else if (strcmpic(ss, US"strict") == 0) strict = TRUE;
- else if (strcmpic(ss, US"per_byte") == 0) per_byte = TRUE;
- else if (strcmpic(ss, US"per_cmd") == 0) per_cmd = TRUE;
- else if (strcmpic(ss, US"per_conn") == 0) per_conn = TRUE;
- else if (strcmpic(ss, US"per_mail") == 0) per_mail = TRUE;
- else if (strcmpic(ss, US"per_rcpt") == 0) per_cmd = TRUE; /* alias */
- else have_key = TRUE;
- }
-if (leaky + strict > 1 || per_byte + per_cmd + per_conn + per_mail > 1)
- {
- *log_msgptr = US"conflicting options for \"ratelimit\" condition";
- return ERROR;
+ else if (strcmpic(ss, US"noupdate") == 0) noupdate = TRUE;
+ else if (strcmpic(ss, US"readonly") == 0) readonly = TRUE;
+ else if (strcmpic(ss, US"per_cmd") == 0) RATE_SET(mode, PER_CMD);
+ else if (strcmpic(ss, US"per_conn") == 0)
+ {
+ RATE_SET(mode, PER_CONN);
+ if (where == ACL_WHERE_NOTSMTP || where == ACL_WHERE_NOTSMTP_START)
+ badacl = TRUE;
+ }
+ else if (strcmpic(ss, US"per_mail") == 0)
+ {
+ RATE_SET(mode, PER_MAIL);
+ if (where > ACL_WHERE_NOTSMTP) badacl = TRUE;
+ }
+ else if (strcmpic(ss, US"per_rcpt") == 0)
+ {
+ /* If we are running in the RCPT ACL, then we'll count the recipients
+ one by one, but if we are running when we have accumulated the whole
+ list then we'll add them all in one batch. */
+ if (where == ACL_WHERE_RCPT)
+ RATE_SET(mode, PER_RCPT);
+ else if (where >= ACL_WHERE_PREDATA && where <= ACL_WHERE_NOTSMTP)
+ RATE_SET(mode, PER_ALLRCPTS), count = (double)recipients_count;
+ else if (where == ACL_WHERE_MAIL || where > ACL_WHERE_NOTSMTP)
+ RATE_SET(mode, PER_RCPT), badacl = TRUE;
+ }
+ else if (strcmpic(ss, US"per_byte") == 0)
+ {
+ /* If we have not yet received the message data and there was no SIZE
+ declaration on the MAIL comand, then it's safe to just use a value of
+ zero and let the recorded rate decay as if nothing happened. */
+ RATE_SET(mode, PER_MAIL);
+ if (where > ACL_WHERE_NOTSMTP) badacl = TRUE;
+ else count = message_size < 0 ? 0.0 : (double)message_size;
+ }
+ else if (strcmpic(ss, US"per_addr") == 0)
+ {
+ RATE_SET(mode, PER_RCPT);
+ if (where != ACL_WHERE_RCPT) badacl = TRUE, unique = US"*";
+ else unique = string_sprintf("%s@%s", deliver_localpart, deliver_domain);
+ }
+ else if (strncmpic(ss, US"count=", 6) == 0)
+ {
+ uschar *e;
+ count = Ustrtod(ss+6, &e);
+ if (count < 0.0 || *e != '\0')
+ return ratelimit_error(log_msgptr,
+ "\"%s\" is not a positive number", ss);
+ }
+ else if (strncmpic(ss, US"unique=", 7) == 0)
+ unique = string_copy(ss + 7);
+ else if (key == NULL)
+ key = string_copy(ss);
+ else
+ key = string_sprintf("%s/%s", key, ss);
}
-/* Default option values */
-if (!strict) leaky = TRUE;
-if (!per_byte && !per_cmd && !per_conn) per_mail = TRUE;
-
-/* If there is no explicit key, use the sender_host_address. If there is no
-sender_host_address (e.g. -bs or acl_not_smtp) then we simply omit it. */
-
-if (!have_key && sender_host_address != NULL)
- key = string_sprintf("%s / %s", key, sender_host_address);
+/* Sanity check. When the badacl flag is set the update mode must either
+be readonly (which is the default if it is omitted) or, for backwards
+compatibility, a combination of noupdate and strict or leaky. */
+
+if (mode == RATE_PER_CLASH)
+ return ratelimit_error(log_msgptr, "conflicting per_* options");
+if (leaky + strict + readonly > 1)
+ return ratelimit_error(log_msgptr, "conflicting update modes");
+if (badacl && (leaky || strict) && !noupdate)
+ return ratelimit_error(log_msgptr,
+ "\"%s\" must not have /leaky or /strict option in %s ACL",
+ ratelimit_option_string[mode], acl_wherenames[where]);
+
+/* Set the default values of any unset options. In readonly mode we
+perform the rate computation without any increment so that its value
+decays to eventually allow over-limit senders through. */
+
+if (noupdate) readonly = TRUE, leaky = strict = FALSE;
+if (badacl) readonly = TRUE;
+if (readonly) count = 0.0;
+if (!strict && !readonly) leaky = TRUE;
+if (mode == RATE_PER_WHAT) mode = RATE_PER_MAIL;
+
+/* Create the lookup key. If there is no explicit key, use sender_host_address.
+If there is no sender_host_address (e.g. -bs or acl_not_smtp) then we simply
+omit it. The smoothing constant (sender_rate_period) and the per_xxx options
+are added to the key because they alter the meaning of the stored data. */
+
+if (key == NULL)
+ key = (sender_host_address == NULL)? US"" : sender_host_address;
+
+key = string_sprintf("%s/%s/%s%s",
+ sender_rate_period,
+ ratelimit_option_string[mode],
+ unique == NULL ? "" : "unique/",
+ key);
-HDEBUG(D_acl) debug_printf("ratelimit condition limit=%.0f period=%.0f key=%s\n",
- limit, period, key);
+HDEBUG(D_acl)
+ debug_printf("ratelimit condition count=%.0f %.1f/%s\n", count, limit, key);
-/* See if we have already computed the rate by looking in the relevant tree. For
-per-connection rate limiting, store tree nodes and dbdata in the permanent pool
-so that they survive across resets. */
+/* See if we have already computed the rate by looking in the relevant tree.
+For per-connection rate limiting, store tree nodes and dbdata in the permanent
+pool so that they survive across resets. In readonly mode we only remember the
+result for the rest of this command in case a later command changes it. After
+this bit of logic the code is independent of the per_* mode. */
-anchor = NULL;
old_pool = store_pool;
-if (per_conn)
- {
+if (readonly)
+ anchor = &ratelimiters_cmd;
+else switch(mode) {
+case RATE_PER_CONN:
anchor = &ratelimiters_conn;
store_pool = POOL_PERM;
- }
-else if (per_mail || per_byte)
+ break;
+case RATE_PER_BYTE:
+case RATE_PER_MAIL:
+case RATE_PER_ALLRCPTS:
anchor = &ratelimiters_mail;
-else if (per_cmd)
+ break;
+case RATE_PER_ADDR:
+case RATE_PER_CMD:
+case RATE_PER_RCPT:
anchor = &ratelimiters_cmd;
+ break;
+default:
+ anchor = NULL; /* silence an "unused" complaint */
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE,
+ "internal ACL error: unknown ratelimit mode %d", mode);
+ break;
+}
-if (anchor != NULL && (t = tree_search(*anchor, key)) != NULL)
+t = tree_search(*anchor, key);
+if (t != NULL)
{
dbd = t->data.ptr;
/* The following few lines duplicate some of the code below. */
- if (dbd->rate < limit) rc = FAIL;
- else rc = OK;
+ rc = (dbd->rate < limit)? FAIL : OK;
store_pool = old_pool;
sender_rate = string_sprintf("%.1f", dbd->rate);
HDEBUG(D_acl)
return rc;
}
-/* We aren't using a pre-computed rate, so get a previously recorded
-rate from the database, update it, and write it back. If there's no
-previous rate for this key, create one. */
+/* We aren't using a pre-computed rate, so get a previously recorded rate
+from the database, which will be updated and written back if required. */
dbm = dbfn_open(US"ratelimit", O_RDWR, &dbblock, TRUE);
if (dbm == NULL)
*log_msgptr = US"ratelimit database not available";
return DEFER;
}
-dbd = dbfn_read(dbm, key);
+dbdb = dbfn_read_with_length(dbm, key, &dbdb_size);
+dbd = NULL;
gettimeofday(&tv, NULL);
+if (dbdb != NULL)
+ {
+ /* Locate the basic ratelimit block inside the DB data. */
+ HDEBUG(D_acl) debug_printf("ratelimit found key in database\n");
+ dbd = &dbdb->dbd;
+
+ /* Forget the old Bloom filter if it is too old, so that we count each
+ repeating event once per period. We don't simply clear and re-use the old
+ filter because we want its size to change if the limit changes. Note that
+ we keep the dbd pointer for copying the rate into the new data block. */
+
+ if(unique != NULL && tv.tv_sec > dbdb->bloom_epoch + period)
+ {
+ HDEBUG(D_acl) debug_printf("ratelimit discarding old Bloom filter\n");
+ dbdb = NULL;
+ }
+
+ /* Sanity check. */
+
+ if(unique != NULL && dbdb_size < sizeof(*dbdb))
+ {
+ HDEBUG(D_acl) debug_printf("ratelimit discarding undersize Bloom filter\n");
+ dbdb = NULL;
+ }
+ }
+
+/* Allocate a new data block if the database lookup failed
+or the Bloom filter passed its age limit. */
+
+if (dbdb == NULL)
+ {
+ if (unique == NULL)
+ {
+ /* No Bloom filter. This basic ratelimit block is initialized below. */
+ HDEBUG(D_acl) debug_printf("ratelimit creating new rate data block\n");
+ dbdb_size = sizeof(*dbd);
+ dbdb = store_get(dbdb_size);
+ }
+ else
+ {
+ int extra;
+ HDEBUG(D_acl) debug_printf("ratelimit creating new Bloom filter\n");
+
+ /* See the long comment below for an explanation of the magic number 2.
+ The filter has a minimum size in case the rate limit is very small;
+ this is determined by the definition of dbdata_ratelimit_unique. */
+
+ extra = (int)limit * 2 - sizeof(dbdb->bloom);
+ if (extra < 0) extra = 0;
+ dbdb_size = sizeof(*dbdb) + extra;
+ dbdb = store_get(dbdb_size);
+ dbdb->bloom_epoch = tv.tv_sec;
+ dbdb->bloom_size = sizeof(dbdb->bloom) + extra;
+ memset(dbdb->bloom, 0, dbdb->bloom_size);
+
+ /* Preserve any basic ratelimit data (which is our longer-term memory)
+ by copying it from the discarded block. */
+
+ if (dbd != NULL)
+ {
+ dbdb->dbd = *dbd;
+ dbd = &dbdb->dbd;
+ }
+ }
+ }
+
+/* If we are counting unique events, find out if this event is new or not.
+If the client repeats the event during the current period then it should be
+counted. We skip this code in readonly mode for efficiency, because any
+changes to the filter will be discarded and because count is already set to
+zero. */
+
+if (unique != NULL && !readonly)
+ {
+ /* We identify unique events using a Bloom filter. (You can find my
+ notes on Bloom filters at http://fanf.livejournal.com/81696.html)
+ With the per_addr option, an "event" is a recipient address, though the
+ user can use the unique option to define their own events. We only count
+ an event if we have not seen it before.
+
+ We size the filter according to the rate limit, which (in leaky mode)
+ is the limit on the population of the filter. We allow 16 bits of space
+ per entry (see the construction code above) and we set (up to) 8 of them
+ when inserting an element (see the loop below). The probability of a false
+ positive (an event we have not seen before but which we fail to count) is
+
+ size = limit * 16
+ numhash = 8
+ allzero = exp(-numhash * pop / size)
+ = exp(-0.5 * pop / limit)
+ fpr = pow(1 - allzero, numhash)
+
+ For senders at the limit the fpr is 0.06% or 1 in 1700
+ and for senders at half the limit it is 0.0006% or 1 in 170000
+
+ In strict mode the Bloom filter can fill up beyond the normal limit, in
+ which case the false positive rate will rise. This means that the
+ measured rate for very fast senders can bogusly drop off after a while.
+
+ At twice the limit, the fpr is 2.5% or 1 in 40
+ At four times the limit, it is 31% or 1 in 3.2
+
+ It takes ln(pop/limit) periods for an over-limit burst of pop events to
+ decay below the limit, and if this is more than one then the Bloom filter
+ will be discarded before the decay gets that far. The false positive rate
+ at this threshold is 9.3% or 1 in 10.7. */
+
+ BOOL seen;
+ unsigned n, hash, hinc;
+ uschar md5sum[16];
+ md5 md5info;
+
+ /* Instead of using eight independent hash values, we combine two values
+ using the formula h1 + n * h2. This does not harm the Bloom filter's
+ performance, and means the amount of hash we need is independent of the
+ number of bits we set in the filter. */
+
+ md5_start(&md5info);
+ md5_end(&md5info, unique, Ustrlen(unique), md5sum);
+ hash = md5sum[0] | md5sum[1] << 8 | md5sum[2] << 16 | md5sum[3] << 24;
+ hinc = md5sum[4] | md5sum[5] << 8 | md5sum[6] << 16 | md5sum[7] << 24;
+
+ /* Scan the bits corresponding to this event. A zero bit means we have
+ not seen it before. Ensure all bits are set to record this event. */
+
+ HDEBUG(D_acl) debug_printf("ratelimit checking uniqueness of %s\n", unique);
+
+ seen = TRUE;
+ for (n = 0; n < 8; n++, hash += hinc)
+ {
+ int bit = 1 << (hash % 8);
+ int byte = (hash / 8) % dbdb->bloom_size;
+ if ((dbdb->bloom[byte] & bit) == 0)
+ {
+ dbdb->bloom[byte] |= bit;
+ seen = FALSE;
+ }
+ }
+
+ /* If this event has occurred before, do not count it. */
+
+ if (seen)
+ {
+ HDEBUG(D_acl) debug_printf("ratelimit event found in Bloom filter\n");
+ count = 0.0;
+ }
+ else
+ HDEBUG(D_acl) debug_printf("ratelimit event added to Bloom filter\n");
+ }
+
+/* If there was no previous ratelimit data block for this key, initialize
+the new one, otherwise update the block from the database. The initial rate
+is what would be computed by the code below for an infinite interval. */
+
if (dbd == NULL)
{
- HDEBUG(D_acl) debug_printf("ratelimit initializing new key's data\n");
- dbd = store_get(sizeof(dbdata_ratelimit));
+ HDEBUG(D_acl) debug_printf("ratelimit initializing new key's rate data\n");
+ dbd = &dbdb->dbd;
dbd->time_stamp = tv.tv_sec;
dbd->time_usec = tv.tv_usec;
- dbd->rate = 0.0;
+ dbd->rate = count;
}
else
{
double i_over_p = interval / period;
double a = exp(-i_over_p);
+ /* Combine the instantaneous rate (period / interval) with the previous rate
+ using the smoothing factor a. In order to measure sized events, multiply the
+ instantaneous rate by the count of bytes or recipients etc. */
+
dbd->time_stamp = tv.tv_sec;
dbd->time_usec = tv.tv_usec;
-
- /* If we are measuring the rate in bytes per period, multiply the
- measured rate by the message size. If we don't know the message size
- then it's safe to just use a value of zero and let the recorded rate
- decay as if nothing happened. */
-
- if (per_byte)
- dbd->rate = (message_size < 0 ? 0.0 : (double)message_size)
- * (1 - a) / i_over_p + a * dbd->rate;
- else if (per_cmd && where == ACL_WHERE_NOTSMTP)
- dbd->rate = (double)recipients_count
- * (1 - a) / i_over_p + a * dbd->rate;
- else
- dbd->rate = (1 - a) / i_over_p + a * dbd->rate;
+ dbd->rate = (1 - a) * count / i_over_p + a * dbd->rate;
+
+ /* When events are very widely spaced the computed rate tends towards zero.
+ Although this is accurate it turns out not to be useful for our purposes,
+ especially when the first event after a long silence is the start of a spam
+ run. A more useful model is that the rate for an isolated event should be the
+ size of the event per the period size, ignoring the lack of events outside
+ the current period and regardless of where the event falls in the period. So,
+ if the interval was so long that the calculated rate is unhelpfully small, we
+ re-intialize the rate. In the absence of higher-rate bursts, the condition
+ below is true if the interval is greater than the period. */
+
+ if (dbd->rate < count) dbd->rate = count;
}
-/* Clients sending at the limit are considered to be over the limit. This
-matters for edge cases such the first message sent by a client (which gets
-the initial rate of 0.0) when the rate limit is zero (i.e. the client should
-be completely blocked). */
+/* Clients sending at the limit are considered to be over the limit.
+This matters for edge cases such as a limit of zero, when the client
+should be completely blocked. */
-if (dbd->rate < limit) rc = FAIL;
- else rc = OK;
+rc = (dbd->rate < limit)? FAIL : OK;
/* Update the state if the rate is low or if we are being strict. If we
are in leaky mode and the sender's rate is too high, we do not update
the recorded rate in order to avoid an over-aggressive sender's retry
-rate preventing them from getting any email through. */
+rate preventing them from getting any email through. If readonly is set,
+neither leaky nor strict are set, so we do not do any updates. */
+
+if ((rc == FAIL && leaky) || strict)
+ {
+ dbfn_write(dbm, key, dbdb, dbdb_size);
+ HDEBUG(D_acl) debug_printf("ratelimit db updated\n");
+ }
+else
+ {
+ HDEBUG(D_acl) debug_printf("ratelimit db not updated: %s\n",
+ readonly? "readonly mode" : "over the limit, but leaky");
+ }
-if (rc == FAIL || !leaky)
- dbfn_write(dbm, key, dbd, sizeof(dbdata_ratelimit));
dbfn_close(dbm);
-/* Store the result in the tree for future reference, if necessary. */
+/* Store the result in the tree for future reference. */
-if (anchor != NULL)
- {
- t = store_get(sizeof(tree_node) + Ustrlen(key));
- t->data.ptr = dbd;
- Ustrcpy(t->name, key);
- (void)tree_insertnode(anchor, t);
- }
+t = store_get(sizeof(tree_node) + Ustrlen(key));
+t->data.ptr = dbd;
+Ustrcpy(t->name, key);
+(void)tree_insertnode(anchor, t);
/* We create the formatted version of the sender's rate very late in
order to ensure that it is done using the correct storage pool. */
{
uschar *user_message = NULL;
uschar *log_message = NULL;
+uschar *debug_tag = NULL;
+uschar *debug_opts = NULL;
uschar *p = NULL;
int rc = OK;
#ifdef WITH_CONTENT_SCAN
"discard" verb. */
case ACLC_ACL:
- rc = acl_check_internal(where, addr, arg, level+1, user_msgptr, log_msgptr);
- if (rc == DISCARD && verb != ACL_ACCEPT && verb != ACL_DISCARD)
- {
- *log_msgptr = string_sprintf("nested ACL returned \"discard\" for "
- "\"%s\" command (only allowed with \"accept\" or \"discard\")",
- verbs[verb]);
- return ERROR;
- }
+ rc = acl_check_wargs(where, addr, arg, level+1, user_msgptr, log_msgptr);
+ if (rc == DISCARD && verb != ACL_ACCEPT && verb != ACL_DISCARD)
+ {
+ *log_msgptr = string_sprintf("nested ACL returned \"discard\" for "
+ "\"%s\" command (only allowed with \"accept\" or \"discard\")",
+ verbs[verb]);
+ return ERROR;
+ }
break;
case ACLC_AUTHENTICATED:
#endif
case ACLC_CONDITION:
+ /* The true/false parsing here should be kept in sync with that used in
+ expand.c when dealing with ECOND_BOOL so that we don't have too many
+ different definitions of what can be a boolean. */
if (Ustrspn(arg, "0123456789") == Ustrlen(arg)) /* Digits, or empty */
rc = (Uatoi(arg) == 0)? FAIL : OK;
else
*log_msgptr = string_sprintf("invalid \"condition\" value \"%s\"", arg);
break;
+ case ACLC_CONTINUE: /* Always succeeds */
+ break;
+
case ACLC_CONTROL:
control_type = decode_control(arg, &p, where, log_msgptr);
break;
#endif
- #ifdef EXPERIMENTAL_DOMAINKEYS
- case CONTROL_DK_VERIFY:
- dk_do_verify = 1;
+ #ifndef DISABLE_DKIM
+ case CONTROL_DKIM_VERIFY:
+ dkim_disable_verify = TRUE;
break;
#endif
+ case CONTROL_DSCP:
+ if (*p == '/')
+ {
+ int fd, af, level, optname, value;
+ /* If we are acting on stdin, the setsockopt may fail if stdin is not
+ a socket; we can accept that, we'll just debug-log failures anyway. */
+ fd = fileno(smtp_in);
+ af = ip_get_address_family(fd);
+ if (af < 0)
+ {
+ HDEBUG(D_acl)
+ debug_printf("smtp input is probably not a socket [%s], not setting DSCP\n",
+ strerror(errno));
+ break;
+ }
+ if (dscp_lookup(p+1, af, &level, &optname, &value))
+ {
+ if (setsockopt(fd, level, optname, &value, sizeof(value)) < 0)
+ {
+ HDEBUG(D_acl) debug_printf("failed to set input DSCP[%s]: %s\n",
+ p+1, strerror(errno));
+ }
+ else
+ {
+ HDEBUG(D_acl) debug_printf("set input DSCP to \"%s\"\n", p+1);
+ }
+ }
+ else
+ {
+ *log_msgptr = string_sprintf("unrecognised DSCP value in \"control=%s\"", arg);
+ return ERROR;
+ }
+ }
+ else
+ {
+ *log_msgptr = string_sprintf("syntax error in \"control=%s\"", arg);
+ return ERROR;
+ }
+ break;
+
case CONTROL_ERROR:
return ERROR;
no_multiline_responses = TRUE;
break;
+ case CONTROL_NO_PIPELINING:
+ pipelining_enable = FALSE;
+ break;
+
+ case CONTROL_NO_DELAY_FLUSH:
+ disable_delay_flush = TRUE;
+ break;
+
+ case CONTROL_NO_CALLOUT_FLUSH:
+ disable_callout_flush = TRUE;
+ break;
+
case CONTROL_FAKEDEFER:
case CONTROL_FAKEREJECT:
fake_response = (control_type == CONTROL_FAKEDEFER) ? DEFER : FAIL;
}
break;
+ case CONTROL_DEBUG:
+ while (*p == '/')
+ {
+ if (Ustrncmp(p, "/tag=", 5) == 0)
+ {
+ uschar *pp = p + 5;
+ while (*pp != '\0' && *pp != '/') pp++;
+ debug_tag = string_copyn(p+5, pp-p-5);
+ p = pp;
+ }
+ else if (Ustrncmp(p, "/opts=", 6) == 0)
+ {
+ uschar *pp = p + 6;
+ while (*pp != '\0' && *pp != '/') pp++;
+ debug_opts = string_copyn(p+6, pp-p-6);
+ p = pp;
+ }
+ }
+ debug_logging_activate(debug_tag, debug_opts);
+ break;
+
case CONTROL_SUPPRESS_LOCAL_FIXUPS:
suppress_local_fixups = TRUE;
break;
+
+ case CONTROL_CUTTHROUGH_DELIVERY:
+ if (deliver_freeze)
+ {
+ *log_msgptr = string_sprintf("\"control=%s\" on frozen item", arg);
+ return ERROR;
+ }
+ if (queue_only_policy)
+ {
+ *log_msgptr = string_sprintf("\"control=%s\" on queue-only item", arg);
+ return ERROR;
+ }
+ cutthrough_delivery = TRUE;
+ break;
+ }
+ break;
+
+ #ifdef EXPERIMENTAL_DCC
+ case ACLC_DCC:
+ {
+ /* Seperate the regular expression and any optional parameters. */
+ uschar *ss = string_nextinlist(&arg, &sep, big_buffer, big_buffer_size);
+ /* Run the dcc backend. */
+ rc = dcc_process(&ss);
+ /* Modify return code based upon the existance of options. */
+ while ((ss = string_nextinlist(&arg, &sep, big_buffer, big_buffer_size))
+ != NULL) {
+ if (strcmpic(ss, US"defer_ok") == 0 && rc == DEFER)
+ {
+ /* FAIL so that the message is passed to the next ACL */
+ rc = FAIL;
+ }
+ }
}
break;
+ #endif
#ifdef WITH_CONTENT_SCAN
case ACLC_DECODE:
can't. The poll() function does not do the right thing, and in any case
it is not always available.
- NOTE: If ever this state of affairs changes, remember that we may be
+ NOTE 1: If ever this state of affairs changes, remember that we may be
dealing with stdin/stdout here, in addition to TCP/IP connections.
- Whatever is done must work in both cases. To detected the stdin/stdout
- case, check for smtp_in or smtp_out being NULL. */
+ Also, delays may be specified for non-SMTP input, where smtp_out and
+ smtp_in will be NULL. Whatever is done must work in all cases.
+
+ NOTE 2: The added feature of flushing the output before a delay must
+ apply only to SMTP input. Hence the test for smtp_out being non-NULL.
+ */
else
{
+ if (smtp_out != NULL && !disable_delay_flush) mac_smtp_fflush();
while (delay > 0) delay = sleep(delay);
}
}
break;
#endif
- #ifdef EXPERIMENTAL_DOMAINKEYS
- case ACLC_DK_DOMAIN_SOURCE:
- if (dk_verify_block == NULL) { rc = FAIL; break; };
- /* check header source of domain against given string */
- switch (dk_verify_block->address_source) {
- case DK_EXIM_ADDRESS_FROM_FROM:
- rc = match_isinlist(US"from", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
- case DK_EXIM_ADDRESS_FROM_SENDER:
- rc = match_isinlist(US"sender", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
- case DK_EXIM_ADDRESS_NONE:
- rc = match_isinlist(US"none", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
- }
- break;
-
- case ACLC_DK_POLICY:
- if (dk_verify_block == NULL) { rc = FAIL; break; };
- /* check policy against given string, default FAIL */
- rc = FAIL;
- if (dk_verify_block->signsall)
- rc = match_isinlist(US"signsall", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- if (dk_verify_block->testing)
- rc = match_isinlist(US"testing", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
-
- case ACLC_DK_SENDER_DOMAINS:
- if (dk_verify_block == NULL) { rc = FAIL; break; };
- if (dk_verify_block->domain != NULL)
- rc = match_isinlist(dk_verify_block->domain, &arg, 0, &domainlist_anchor,
- NULL, MCL_DOMAIN, TRUE, NULL);
- else rc = FAIL;
- break;
-
- case ACLC_DK_SENDER_LOCAL_PARTS:
- if (dk_verify_block == NULL) { rc = FAIL; break; };
- if (dk_verify_block->local_part != NULL)
- rc = match_isinlist(dk_verify_block->local_part, &arg, 0, &localpartlist_anchor,
- NULL, MCL_LOCALPART, TRUE, NULL);
- else rc = FAIL;
- break;
-
- case ACLC_DK_SENDERS:
- if (dk_verify_block == NULL) { rc = FAIL; break; };
- if (dk_verify_block->address != NULL)
- rc = match_address_list(dk_verify_block->address, TRUE, TRUE, &arg, NULL, -1, 0, NULL);
- else rc = FAIL;
+ #ifndef DISABLE_DKIM
+ case ACLC_DKIM_SIGNER:
+ if (dkim_cur_signer != NULL)
+ rc = match_isinlist(dkim_cur_signer,
+ &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
+ else
+ rc = FAIL;
break;
- case ACLC_DK_STATUS:
- if (dk_verify_block == NULL) { rc = FAIL; break; };
- if (dk_verify_block->result > 0) {
- switch(dk_verify_block->result) {
- case DK_EXIM_RESULT_BAD_FORMAT:
- rc = match_isinlist(US"bad format", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
- case DK_EXIM_RESULT_NO_KEY:
- rc = match_isinlist(US"no key", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
- case DK_EXIM_RESULT_NO_SIGNATURE:
- rc = match_isinlist(US"no signature", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
- case DK_EXIM_RESULT_REVOKED:
- rc = match_isinlist(US"revoked", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
- case DK_EXIM_RESULT_NON_PARTICIPANT:
- rc = match_isinlist(US"non-participant", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
- case DK_EXIM_RESULT_GOOD:
- rc = match_isinlist(US"good", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
- case DK_EXIM_RESULT_BAD:
- rc = match_isinlist(US"bad", &arg, 0, NULL,
- NULL, MCL_STRING, TRUE, NULL);
- break;
- }
- }
+ case ACLC_DKIM_STATUS:
+ rc = match_isinlist(dkim_exim_expand_query(DKIM_VERIFY_STATUS),
+ &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
break;
#endif
writing is poorly documented. */
case ACLC_ENCRYPTED:
- if (tls_cipher == NULL) rc = FAIL; else
+ if (tls_in.cipher == NULL) rc = FAIL; else
{
uschar *endcipher = NULL;
- uschar *cipher = Ustrchr(tls_cipher, ':');
- if (cipher == NULL) cipher = tls_cipher; else
+ uschar *cipher = Ustrchr(tls_in.cipher, ':');
+ if (cipher == NULL) cipher = tls_in.cipher; else
{
endcipher = Ustrchr(++cipher, ':');
if (endcipher != NULL) *endcipher = 0;
break;
#endif
+ case ACLC_REMOVE_HEADER:
+ setup_remove_header(arg);
+ break;
+
case ACLC_SENDER_DOMAINS:
{
uschar *sdomain;
#ifdef EXPERIMENTAL_SPF
case ACLC_SPF:
- rc = spf_process(&arg, sender_address);
+ rc = spf_process(&arg, sender_address, SPF_PROCESS_NORMAL);
+ break;
+ case ACLC_SPF_GUESS:
+ rc = spf_process(&arg, sender_address, SPF_PROCESS_GUESS);
break;
#endif
*log_msgptr = *user_msgptr = NULL;
acl_temp_details = FALSE;
- if (where == ACL_WHERE_QUIT &&
+ if ((where == ACL_WHERE_QUIT || where == ACL_WHERE_NOTQUIT) &&
acl->verb != ACL_ACCEPT &&
acl->verb != ACL_WARN)
{
- *log_msgptr = string_sprintf("\"%s\" is not allowed in a QUIT ACL",
+ *log_msgptr = string_sprintf("\"%s\" is not allowed in a QUIT or not-QUIT ACL",
verbs[acl->verb]);
return ERROR;
}
switch (cond)
{
case DEFER:
- HDEBUG(D_acl) debug_printf("%s: condition test deferred\n", verbs[acl->verb]);
+ HDEBUG(D_acl) debug_printf("%s: condition test deferred in %s\n", verbs[acl->verb], acl_name);
if (basic_errno != ERRNO_CALLOUTDEFER)
{
if (search_error_message != NULL && *search_error_message != 0)
default: /* Paranoia */
case ERROR:
- HDEBUG(D_acl) debug_printf("%s: condition test error\n", verbs[acl->verb]);
+ HDEBUG(D_acl) debug_printf("%s: condition test error in %s\n", verbs[acl->verb], acl_name);
return ERROR;
case OK:
- HDEBUG(D_acl) debug_printf("%s: condition test succeeded\n",
- verbs[acl->verb]);
+ HDEBUG(D_acl) debug_printf("%s: condition test succeeded in %s\n",
+ verbs[acl->verb], acl_name);
break;
case FAIL:
- HDEBUG(D_acl) debug_printf("%s: condition test failed\n", verbs[acl->verb]);
+ HDEBUG(D_acl) debug_printf("%s: condition test failed in %s\n", verbs[acl->verb], acl_name);
break;
/* DISCARD and DROP can happen only from a nested ACL condition, and
DISCARD can happen only for an "accept" or "discard" verb. */
case DISCARD:
- HDEBUG(D_acl) debug_printf("%s: condition test yielded \"discard\"\n",
- verbs[acl->verb]);
+ HDEBUG(D_acl) debug_printf("%s: condition test yielded \"discard\" in %s\n",
+ verbs[acl->verb], acl_name);
break;
case FAIL_DROP:
- HDEBUG(D_acl) debug_printf("%s: condition test yielded \"drop\"\n",
- verbs[acl->verb]);
+ HDEBUG(D_acl) debug_printf("%s: condition test yielded \"drop\" in %s\n",
+ verbs[acl->verb], acl_name);
break;
}
}
+
+
+/* Same args as acl_check_internal() above, but the string s is
+the name of an ACL followed optionally by up to 9 space-separated arguments.
+The name and args are separately expanded. Args go into $acl_arg globals. */
+static int
+acl_check_wargs(int where, address_item *addr, uschar *s, int level,
+ uschar **user_msgptr, uschar **log_msgptr)
+{
+uschar * tmp;
+uschar * tmp_arg[9]; /* must match acl_arg[] */
+uschar * sav_arg[9]; /* must match acl_arg[] */
+int sav_narg;
+uschar * name;
+int i;
+int ret;
+
+if (!(tmp = string_dequote(&s)) || !(name = expand_string(tmp)))
+ goto bad;
+
+for (i = 0; i < 9; i++)
+ {
+ while (*s && isspace(*s)) s++;
+ if (!*s) break;
+ if (!(tmp = string_dequote(&s)) || !(tmp_arg[i] = expand_string(tmp)))
+ {
+ tmp = name;
+ goto bad;
+ }
+ }
+
+sav_narg = acl_narg;
+acl_narg = i;
+for (i = 0; i < acl_narg; i++)
+ {
+ sav_arg[i] = acl_arg[i];
+ acl_arg[i] = tmp_arg[i];
+ }
+while (i < 9)
+ {
+ sav_arg[i] = acl_arg[i];
+ acl_arg[i++] = NULL;
+ }
+
+ret = acl_check_internal(where, addr, name, level, user_msgptr, log_msgptr);
+
+acl_narg = sav_narg;
+for (i = 0; i < 9; i++) acl_arg[i] = sav_arg[i];
+return ret;
+
+bad:
+if (expand_string_forcedfail) return ERROR;
+*log_msgptr = string_sprintf("failed to expand ACL string \"%s\": %s",
+ tmp, expand_string_message);
+return search_find_defer?DEFER:ERROR;
+}
+
+
+
/*************************************************
* Check access using an ACL *
*************************************************/
+/* Alternate interface for ACL, used by expansions */
+int
+acl_eval(int where, uschar *recipient, uschar *s, uschar **user_msgptr,
+ uschar **log_msgptr)
+{
+int rc;
+address_item adb;
+address_item *addr = NULL;
+
+*user_msgptr = *log_msgptr = NULL;
+sender_verified_failed = NULL;
+ratelimiters_cmd = NULL;
+log_reject_target = LOG_MAIN|LOG_REJECT;
+
+if (where == ACL_WHERE_RCPT)
+ {
+ adb = address_defaults;
+ addr = &adb;
+ addr->address = recipient;
+ if (deliver_split_address(addr) == DEFER)
+ {
+ *log_msgptr = US"defer in percent_hack_domains check";
+ return DEFER;
+ }
+ deliver_domain = addr->domain;
+ deliver_localpart = addr->local_part;
+ }
+
+return acl_check_internal(where, addr, s, 0, user_msgptr, log_msgptr);
+}
+
+
+
/* This is the external interface for ACL checks. It sets up an address and the
expansions for $domain and $local_part when called after RCPT, then calls
acl_check_internal() to do the actual work.
DEFER can't tell at the moment
ERROR disaster
*/
+int acl_where = ACL_WHERE_UNKNOWN;
int
acl_check(int where, uschar *recipient, uschar *s, uschar **user_msgptr,
deliver_localpart = addr->local_part;
}
+acl_where = where;
rc = acl_check_internal(where, addr, s, 0, user_msgptr, log_msgptr);
+acl_where = ACL_WHERE_UNKNOWN;
+
+/* Cutthrough - if requested,
+and WHERE_RCPT and not yet opened conn as result of recipient-verify,
+and rcpt acl returned accept,
+and first recipient (cancel on any subsequents)
+open one now and run it up to RCPT acceptance.
+A failed verify should cancel cutthrough request.
+
+Initial implementation: dual-write to spool.
+Assume the rxd datastream is now being copied byte-for-byte to an open cutthrough connection.
+
+Cease cutthrough copy on rxd final dot; do not send one.
+
+On a data acl, if not accept and a cutthrough conn is open, hard-close it (no SMTP niceness).
+
+On data acl accept, terminate the dataphase on an open cutthrough conn. If accepted or
+perm-rejected, reflect that to the original sender - and dump the spooled copy.
+If temp-reject, close the conn (and keep the spooled copy).
+If conn-failure, no action (and keep the spooled copy).
+*/
+switch (where)
+{
+case ACL_WHERE_RCPT:
+ if( rcpt_count > 1 )
+ cancel_cutthrough_connection("more than one recipient");
+ else if (rc == OK && cutthrough_delivery && cutthrough_fd < 0)
+ open_cutthrough_connection(addr);
+ break;
+
+case ACL_WHERE_PREDATA:
+ if( rc == OK )
+ cutthrough_predata();
+ else
+ cancel_cutthrough_connection("predata acl not ok");
+ break;
+
+case ACL_WHERE_QUIT:
+case ACL_WHERE_NOTQUIT:
+ cancel_cutthrough_connection("quit or notquit");
+ break;
+
+default:
+ break;
+}
deliver_domain = deliver_localpart = deliver_address_data =
sender_address_data = NULL;
/* Before giving a response, take a look at the length of any user message, and
split it up into multiple lines if possible. */
-if (*user_msgptr != NULL && Ustrlen(*user_msgptr) > 75)
- {
- uschar *s = *user_msgptr = string_copy(*user_msgptr);
- uschar *ss = s;
-
- for (;;)
- {
- int i = 0;
- while (i < 75 && *ss != 0 && *ss != '\n') ss++, i++;
- if (*ss == 0) break;
- if (*ss == '\n')
- s = ++ss;
- else
- {
- uschar *t = ss + 1;
- uschar *tt = NULL;
- while (--t > s + 35)
- {
- if (*t == ' ')
- {
- if (t[-1] == ':') { tt = t; break; }
- if (tt == NULL) tt = t;
- }
- }
-
- if (tt == NULL) /* Can't split behind - try ahead */
- {
- t = ss + 1;
- while (*t != 0)
- {
- if (*t == ' ' || *t == '\n')
- { tt = t; break; }
- t++;
- }
- }
-
- if (tt == NULL) break; /* Can't find anywhere to split */
- *tt = '\n';
- s = ss = tt+1;
- }
- }
- }
+*user_msgptr = string_split_message(*user_msgptr);
+if (fake_response != OK)
+ fake_response_text = string_split_message(fake_response_text);
return rc;
}
-
/*************************************************
* Create ACL variable *
*************************************************/
projects / exim.git / blobdiff