Events: add recipient-deferred events, both per-host and all-hosts.
[exim.git] / src / src / acl.c
index aa9f58f2c3e45f913255278d18b616593b58be3b..911ecfed2ae10b9dac2250a7e39c653e9c1a2ef5 100644 (file)
@@ -2,7 +2,7 @@
 *     Exim - an Internet mail transport agent    *
 *************************************************/
 
-/* Copyright (c) University of Cambridge 1995 - 2014 */
+/* Copyright (c) University of Cambridge 1995 - 2015 */
 /* See the file NOTICE for conditions of use and distribution. */
 
 /* Code for handling Access Control Lists (ACLs) */
@@ -1803,27 +1803,27 @@ switch(vp->value)
     test whether it was successful or not. (This is for optional verification; for
     mandatory verification, the connection doesn't last this long.) */
 
-      if (tls_in.certificate_verified) return OK;
-      *user_msgptr = US"no verified certificate";
-      return FAIL;
+    if (tls_in.certificate_verified) return OK;
+    *user_msgptr = US"no verified certificate";
+    return FAIL;
 
   case VERIFY_HELO:
     /* We can test the result of optional HELO verification that might have
     occurred earlier. If not, we can attempt the verification now. */
 
-      if (!helo_verified && !helo_verify_failed) smtp_verify_helo();
-      return helo_verified? OK : FAIL;
+    if (!helo_verified && !helo_verify_failed) smtp_verify_helo();
+    return helo_verified? OK : FAIL;
 
   case VERIFY_CSA:
     /* Do Client SMTP Authorization checks in a separate function, and turn the
     result code into user-friendly strings. */
 
-      rc = acl_verify_csa(list);
-      *log_msgptr = *user_msgptr = string_sprintf("client SMTP authorization %s",
+    rc = acl_verify_csa(list);
+    *log_msgptr = *user_msgptr = string_sprintf("client SMTP authorization %s",
                                               csa_reason_string[rc]);
-      csa_status = csa_status_string[rc];
-      DEBUG(D_acl) debug_printf("CSA result %s\n", csa_status);
-      return csa_return_code[rc];
+    csa_status = csa_status_string[rc];
+    DEBUG(D_acl) debug_printf("CSA result %s\n", csa_status);
+    return csa_return_code[rc];
 
   case VERIFY_HDR_SYNTAX:
     /* Check that all relevant header lines have the correct syntax. If there is
@@ -1832,8 +1832,11 @@ switch(vp->value)
     always). */
 
     rc = verify_check_headers(log_msgptr);
-    if (rc != OK && smtp_return_error_details && *log_msgptr != NULL)
-      *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
+    if (rc != OK && *log_msgptr)
+      if (smtp_return_error_details)
+       *user_msgptr = string_sprintf("Rejected after DATA: %s", *log_msgptr);
+      else
+       acl_verify_message = *log_msgptr;
     return rc;
 
   case VERIFY_HDR_NAMES_ASCII:
@@ -3372,7 +3375,11 @@ for (; cb != NULL; cb = cb->next)
        break;
 
        case CONTROL_CUTTHROUGH_DELIVERY:
+#ifndef DISABLE_PRDR
        if (prdr_requested)
+#else
+       if (0)
+#endif
          /* Too hard to think about for now.  We might in future cutthrough
          the case where both sides handle prdr and this-node prdr acl
          is "accept" */
@@ -3480,6 +3487,34 @@ for (; cb != NULL; cb = cb->next)
             debug_printf("delay skipped in -bh checking mode\n");
           }
 
+       /* NOTE 1: Remember that we may be
+        dealing with stdin/stdout here, in addition to TCP/IP connections.
+        Also, delays may be specified for non-SMTP input, where smtp_out and
+        smtp_in will be NULL. Whatever is done must work in all cases.
+
+        NOTE 2: The added feature of flushing the output before a delay must
+        apply only to SMTP input. Hence the test for smtp_out being non-NULL.
+        */
+
+        else
+          {
+          if (smtp_out != NULL && !disable_delay_flush)
+           mac_smtp_fflush();
+
+#if !defined(NO_POLL_H) && defined (POLLRDHUP)
+           {
+           struct pollfd p;
+           nfds_t n = 0;
+           if (smtp_out)
+             {
+             p.fd = fileno(smtp_out);
+             p.events = POLLRDHUP;
+             n = 1;
+             }
+           if (poll(&p, n, delay*1000) > 0)
+             HDEBUG(D_acl) debug_printf("delay cancelled by peer close\n");
+           }
+#else
         /* It appears to be impossible to detect that a TCP/IP connection has
         gone away without reading from it. This means that we cannot shorten
         the delay below if the client goes away, because we cannot discover
@@ -3489,20 +3524,10 @@ for (; cb != NULL; cb = cb->next)
         Exim process is not held up unnecessarily. However, it seems that we
         can't. The poll() function does not do the right thing, and in any case
         it is not always available.
-
-        NOTE 1: If ever this state of affairs changes, remember that we may be
-        dealing with stdin/stdout here, in addition to TCP/IP connections.
-        Also, delays may be specified for non-SMTP input, where smtp_out and
-        smtp_in will be NULL. Whatever is done must work in all cases.
-
-        NOTE 2: The added feature of flushing the output before a delay must
-        apply only to SMTP input. Hence the test for smtp_out being non-NULL.
         */
 
-        else
-          {
-          if (smtp_out != NULL && !disable_delay_flush) mac_smtp_fflush();
           while (delay > 0) delay = sleep(delay);
+#endif
           }
         }
       }
@@ -3582,7 +3607,8 @@ for (; cb != NULL; cb = cb->next)
     rc = verify_check_this_host(&arg, sender_host_cache, NULL,
       (sender_host_address == NULL)? US"" : sender_host_address,
       CUSS &host_data);
-    if (host_data != NULL) host_data = string_copy_malloc(host_data);
+    if (rc == DEFER) *log_msgptr = search_error_message;
+    if (host_data) host_data = string_copy_malloc(host_data);
     break;
 
     case ACLC_LOCAL_PARTS:
@@ -3597,8 +3623,7 @@ for (; cb != NULL; cb = cb->next)
       int sep = 0;
       const uschar *s = arg;
       uschar *ss;
-      while ((ss = string_nextinlist(&s, &sep, big_buffer, big_buffer_size))
-              != NULL)
+      while ((ss = string_nextinlist(&s, &sep, big_buffer, big_buffer_size)))
         {
         if (Ustrcmp(ss, "main") == 0) logbits |= LOG_MAIN;
         else if (Ustrcmp(ss, "panic") == 0) logbits |= LOG_PANIC;
@@ -3718,7 +3743,12 @@ for (; cb != NULL; cb = cb->next)
     case ACLC_SET:
       {
       int old_pool = store_pool;
-      if (cb->u.varname[0] == 'c') store_pool = POOL_PERM;
+      if (  cb->u.varname[0] == 'c'
+#ifdef EXPERIMENTAL_EVENT
+        || event_name          /* An event is being delivered */
+#endif
+        )
+        store_pool = POOL_PERM;
       acl_var_create(cb->u.varname)->data.ptr = string_copy(arg);
       store_pool = old_pool;
       }
@@ -3766,7 +3796,8 @@ for (; cb != NULL; cb = cb->next)
 
     case ACLC_VERIFY:
     rc = acl_verify(where, addr, arg, user_msgptr, log_msgptr, basic_errno);
-    acl_verify_message = *user_msgptr;
+    if (*user_msgptr)
+      acl_verify_message = *user_msgptr;
     if (verb == ACL_WARN) *user_msgptr = NULL;
     break;
 
@@ -4265,7 +4296,7 @@ while (acl != NULL)
     case ACL_WARN:
     if (cond == OK)
       acl_warn(where, *user_msgptr, *log_msgptr);
-    else if (cond == DEFER && (log_extra_selector & LX_acl_warn_skipped) != 0)
+    else if (cond == DEFER && LOGGING(acl_warn_skipped))
       log_write(0, LOG_MAIN, "%s Warning: ACL \"warn\" statement skipped: "
         "condition test deferred%s%s", host_and_ident(TRUE),
         (*log_msgptr == NULL)? US"" : US": ",