+###############################################################################
+# TLS #
+###############################################################################
+# Exim is built by default to support the SMTP STARTTLS command, which implements
+# Transport Layer Security using SSL (Secure Sockets Layer). This requires you
+# must install the OpenSSL library package or the GnuTLS library. Exim contains
+# no cryptographic code of its own.
+
+# If you are running Exim as a (TLS) server, just building it with TLS support
+# is all you need to do, as tls_advertise_hosts is set to '*' by
+# default. But you are advised to create a suiteable certificate, and tell
+# Exim about it by means of the tls_certificate and tls_privatekey run
+# time options, otherwise Exim will create a self signed certificate on
+# the fly. If you are running Exim only as a (TLS) client, building it with
+# TLS support is all you need to do.
+#
+# If you are using pkg-config then you should not need to worry where
+# the libraries and headers are installed, as the pkg-config .pc
+# specification should include all -L/-I information necessary.
+# Enabling the USE_*_PC options should be sufficient. If not using
+# pkg-config, then you have to specify the libraries, and you mmight
+# need to specify the locations too.
+
+# Uncomment the following lines if you want
+# to build Exim without any TLS support (either OpenSSL or GnuTLS):
+# DISABLE_TLS=yes
+# Unless you do this, you must define one of USE_OPENSSL or USE_GNUTLS
+# below.
+
+# If you are buliding with TLS, the library configuration must be done:
+
+# Uncomment this if you are using OpenSSL
+# USE_OPENSSL=yes
+# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not
+# and an optional location.
+# USE_OPENSSL_PC=openssl
+# TLS_LIBS=-lssl -lcrypto
+# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
+
+# Uncomment this if you are using GnuTLS
+# USE_GNUTLS=yes
+# Uncomment one of these settings if you are using GnuTLS; pkg-config vs not
+# and an optional location. If you disable SUPPORT_DANE below, you
+# can remove the gnutls-dane references here. Earlier versions of GnuTLS
+# required libtasn1 and libgrypt also; add if needed.
+# USE_GNUTLS_PC=gnutls gnutls-dane
+# TLS_LIBS=-lgnutls -lgnutls-dane
+# TLS_LIBS=-L/usr/local/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane
+
+# If using GnuTLS older than 2.10 and using pkg-config then note that Exim's
+# build process will require libgcrypt-config to exist in your $PATH. A
+# version that old is likely to become unsupported by Exim in 2017.
+
+# The security fix we provide with the gnutls_allow_auto_pkcs11 option
+# (4.82 PP/09) introduces a compatibility regression. The symbol is
+# not available if GnuTLS is build without p11-kit (--without-p11-kit
+# configure option). In this case use AVOID_GNUTLS_PKCS11=yes when
+# building Exim.
+# AVOID_GNUTLS_PKCS11=yes
+
+# If you are running Exim as a server, note that just building it with TLS
+# support is not all you need to do. You also need to set up a suitable
+# certificate, and tell Exim about it by means of the tls_certificate
+# and tls_privatekey run time options. You also need to set tls_advertise_hosts
+# to specify the hosts to which Exim advertises TLS support. On the other hand,
+# if you are running Exim only as a client, building it with TLS support
+# is all you need to do.
+
+# If you are using pkg-config then you should not need to worry where the
+# libraries and headers are installed, as the pkg-config .pc specification
+# should include all -L/-I information necessary. If not using pkg-config
+# then you might need to specify the locations too.
+
+# Additional libraries and include files are required for both OpenSSL and
+# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed
+# with all your other libraries. If they are in a special directory, you may
+# need something like
+
+# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
+
+# or
+
+# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane
+# If not using DANE under GnuTLS we can lose one library
+# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt
+
+# TLS_LIBS is included only on the command for linking Exim itself, not on any
+# auxiliary programs. If the include files are not in a standard place, you can
+# set TLS_INCLUDE to specify where they are, for example:
+
+# TLS_INCLUDE=-I/usr/local/openssl/include/
+# or
+# TLS_INCLUDE=-I/opt/gnu/include
+
+# You don't need to set TLS_INCLUDE if the relevant directories are already
+# specified in INCLUDE.
+
+
+
###############################################################################
# THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY #
###############################################################################
# LOOKUP_NWILDLSEARCH=yes
+# Some platforms may need this for LOOKUP_NIS:
+# LIBS += -lnsl
+
#------------------------------------------------------------------------------
# If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate
# which LDAP library you have. Unfortunately, though most of their functions
#------------------------------------------------------------------------------
# Comment out the following line to remove DANE support
# Note: Enabling this unconditionally overrides DISABLE_DNSSEC
-# For DANE under GnuTLS we need an additional library. See TLS_LIBS below.
+# forces you to have SUPPORT_TLS enabled (the default). For DANE under
+# GnuTLS we need an additional library. See TLS_LIBS or USE_GNUTLS_PC
+# below.
SUPPORT_DANE=yes
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Compiling the Exim monitor: If you want to compile the Exim monitor, a
# program that requires an X11 display, then EXIM_MONITOR should be set to the
-# value "eximon.bin". Comment out this setting to disable compilation of the
+# value "eximon.bin". De-comment this setting to enable compilation of the
# monitor. The locations of various X11 directories for libraries and include
# files are defaulted in the OS/Makefile-Default file, but can be overridden in
# local OS-specific make files.
-EXIM_MONITOR=eximon.bin
+# EXIM_MONITOR=eximon.bin
#------------------------------------------------------------------------------
# DISABLE_EVENT=yes
+# Uncomment this line to include support for early pipelining, per
+# https://datatracker.ietf.org/doc/draft-harris-early-pipe/
+# SUPPORT_PIPE_CONNECT=yes
+
+
#------------------------------------------------------------------------------
# Compiling Exim with experimental features. These are documented in
# experimental-spec.txt. "Experimental" means that the way these features are
# Uncomment the following line to add DMARC checking capability, implemented
# using libopendmarc libraries. You must have SPF and DKIM support enabled also.
-# EXPERIMENTAL_DMARC=yes
+# SUPPORT_DMARC=yes
# CFLAGS += -I/usr/local/include
# LDFLAGS += -lopendmarc
# Uncomment the following if you need to change the default. You can
# Uncomment the following line to add queuefile transport support
# EXPERIMENTAL_QUEUEFILE=yes
+# Uncomment the following line to include support for TLS Resumption
+# EXPERIMENTAL_TLS_RESUME=yes
+
###############################################################################
# THESE ARE THINGS YOU MIGHT WANT TO SPECIFY #
###############################################################################
# *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING ***
-#------------------------------------------------------------------------------
-# Exim can be built to support the SMTP STARTTLS command, which implements
-# Transport Layer Security using SSL (Secure Sockets Layer). To do this, you
-# must install the OpenSSL library package or the GnuTLS library. Exim contains
-# no cryptographic code of its own. Uncomment the following lines if you want
-# to build Exim with TLS support. If you don't know what this is all about,
-# leave these settings commented out.
-
-# This setting is required for any TLS support (either OpenSSL or GnuTLS)
-# SUPPORT_TLS=yes
-
-# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not
-# USE_OPENSSL_PC=openssl
-# TLS_LIBS=-lssl -lcrypto
-
-# Uncomment the first and either the second or the third of these if you
-# are using GnuTLS. If you have pkg-config, then the second, else the third.
-# USE_GNUTLS=yes
-# USE_GNUTLS_PC=gnutls
-# TLS_LIBS=-lgnutls -ltasn1 -lgcrypt
-
-# If using GnuTLS older than 2.10 and using pkg-config then note that Exim's
-# build process will require libgcrypt-config to exist in your $PATH. A
-# version that old is likely to become unsupported by Exim in 2017.
-
-# The security fix we provide with the gnutls_allow_auto_pkcs11 option
-# (4.82 PP/09) introduces a compatibility regression. The symbol is
-# not available if GnuTLS is build without p11-kit (--without-p11-kit
-# configure option). In this case use AVOID_GNUTLS_PKCS11=yes when
-# building Exim.
-# AVOID_GNUTLS_PKCS11=yes
-
-# If you are running Exim as a server, note that just building it with TLS
-# support is not all you need to do. You also need to set up a suitable
-# certificate, and tell Exim about it by means of the tls_certificate
-# and tls_privatekey run time options. You also need to set tls_advertise_hosts
-# to specify the hosts to which Exim advertises TLS support. On the other hand,
-# if you are running Exim only as a client, building it with TLS support
-# is all you need to do.
-
-# If you are using pkg-config then you should not need to worry where the
-# libraries and headers are installed, as the pkg-config .pc specification
-# should include all -L/-I information necessary. If not using pkg-config
-# then you might need to specify the locations too.
-
-# Additional libraries and include files are required for both OpenSSL and
-# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed
-# with all your other libraries. If they are in a special directory, you may
-# need something like
-
-# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
-# or
-# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt
-
-# For DANE under GnuTLS we need an additional library.
-# TLS_LIBS += -lgnutls-dane
-
-# TLS_LIBS is included only on the command for linking Exim itself, not on any
-# auxiliary programs. If the include files are not in a standard place, you can
-# set TLS_INCLUDE to specify where they are, for example:
-
-# TLS_INCLUDE=-I/usr/local/openssl/include/
-# or
-# TLS_INCLUDE=-I/opt/gnu/include
-
-# You don't need to set TLS_INCLUDE if the relevant directories are already
-# specified in INCLUDE.
-
-
#------------------------------------------------------------------------------
# The default distribution of Exim contains only the plain text form of the
# documentation. Other forms are available separately. If you want to install
# ENABLE_DISABLE_FSYNC=yes
+#------------------------------------------------------------------------------
+# For development, add this to include code to time various stages and report.
+# CFLAGS += -DMEASURE_TIMING
+
# End of EDITME for Exim 4.
projects / exim.git / blobdiff