-# $Cambridge: exim/src/OS/Makefile-Base,v 1.5 2005/05/04 10:17:29 ph10 Exp $
+# $Cambridge: exim/src/OS/Makefile-Base,v 1.6 2005/05/17 09:53:34 ph10 Exp $
# This file is the basis of the main makefile for Exim and friends. The
# makefile at the top level arranges to build the main makefile by calling
LNCC = $(CC)
+# The compile commands can be very long. To make the output look better,
+# they are not normally echoed in full. To get full echoing, the caller
+# must set FULLECHO='' on the command line and call make with -e. We default
+# FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
+
+FULLECHO = @
+FE = $(FULLECHO)
# The default target double-checks the existence of $(EDITME) and then arranges
# to touch it if it exists and any of the optional configuration files, which
# Targets for special-purpose configuration header builders
buildconfig: buildconfig.c
- $(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
+ @echo "$(CC) buildconfig.c"
+ $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
# Target for the exicyclog utility script
exicyclog: Makefile config.h ../src/exicyclog.src
@rm -f exicyclog
- sed \
+ @sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
../src/exicyclog.src > exicyclog-t
@mv exicyclog-t exicyclog
@chmod a+x exicyclog
- @echo ">>> exicyclog script built"; echo ""
+ @echo ">>> exicyclog script built"
# Target for the exinext utility script
exinext: Makefile config.h ../src/exinext.src
@rm -f exinext
- sed \
+ @sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
../src/exinext.src > exinext-t
@mv exinext-t exinext
@chmod a+x exinext
- @echo ">>> exinext script built"; echo ""
+ @echo ">>> exinext script built"
# Target for the exiwhat utility script
exiwhat: Makefile config.h ../src/exiwhat.src
@rm -f exiwhat
- sed \
+ @sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
../src/exiwhat.src > exiwhat-t
@mv exiwhat-t exiwhat
@chmod a+x exiwhat
- @echo ">>> exiwhat script built"; echo ""
+ @echo ">>> exiwhat script built"
# Target for the exim_checkaccess utility script
exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
@rm -f exim_checkaccess
- sed \
+ @sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
../Local/eximon.conf
@rm -f eximon
$(SHELL) $(SCRIPTS)/Configure-eximon
- sed \
+ @sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
exigrep: Makefile ../src/exigrep.src
@rm -f exigrep
- sed \
+ @sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
../src/exigrep.src > exigrep-t
@mv exigrep-t exigrep
@chmod a+x exigrep
- @echo ">>> exigrep script built"; echo ""
+ @echo ">>> exigrep script built"
eximstats: Makefile ../src/eximstats.src
@rm -f eximstats
- sed \
+ @sed \
-e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/eximstats.src > eximstats-t
@mv eximstats-t eximstats
@chmod a+x eximstats
- @echo ">>> eximstats script built"; echo ""
+ @echo ">>> eximstats script built"
exiqgrep: Makefile ../src/exiqgrep.src
@rm -f exiqgrep
- sed \
+ @sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
../src/exiqgrep.src > exiqgrep-t
@mv exiqgrep-t exiqgrep
@chmod a+x exiqgrep
- @echo ">>> exiqgrep script built"; echo ""
+ @echo ">>> exiqgrep script built"
exiqsumm: Makefile ../src/exiqsumm.src
@rm -f exiqsumm
- sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/exiqsumm.src > exiqsumm-t
@mv exiqsumm-t exiqsumm
@chmod a+x exiqsumm
- @echo ">>> exiqsumm script built"; echo ""
+ @echo ">>> exiqsumm script built"
exipick: Makefile ../src/exipick.src
@rm -f exipick
- sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
-e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
../src/exipick.src > exipick-t
@mv exipick-t exipick
@chmod a+x exipick
- @echo ">>> exipick script built"; echo ""
+ @echo ">>> exipick script built"
transport-filter.pl: Makefile ../src/transport-filter.src
@rm -f transport-filter.pl
- sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/transport-filter.src > transport-filter.pl-t
@mv transport-filter.pl-t transport-filter.pl
@chmod a+x transport-filter.pl
- @echo ">>> transport-filter.pl script built"; echo ""
+ @echo ">>> transport-filter.pl script built"
convert4r3: Makefile ../src/convert4r3.src
@rm -f convert4r3
- sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/convert4r3.src > convert4r3-t
@mv convert4r3-t convert4r3
@chmod a+x convert4r3
- @echo ">>> convert4r3 script built"; echo ""
+ @echo ">>> convert4r3 script built"
convert4r4: Makefile ../src/convert4r4.src
@rm -f convert4r4
- sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/convert4r4.src > convert4r4-t
@mv convert4r4-t convert4r4
@chmod a+x convert4r4
- @echo ">>> convert4r4 script built"; echo ""
+ @echo ">>> convert4r4 script built"
# These are objects of optional features. They are always compiled, but
@echo " "
awk '{ print ($$1+1) }' cnumber.h > cnumber.temp
rm -f cnumber.h; mv cnumber.temp cnumber.h
- $(CC) -c $(CFLAGS) $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) version.c
+ @echo "$(CC) version.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) version.c
rm -f exim
- $(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
+ @echo "$(LNCC) -o exim"
+ $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
pcre/libpcre.a \
routers/routers.a transports/transports.a lookups/lookups.a \
auths/auths.a \
OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
exim_dumpdb: $(OBJ_DUMPDB)
- $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
+ @echo "$(LNCC) -o exim_dumpdb"
+ $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_dumpdb; \
$(STRIP_COMMAND) exim_dumpdb; \
fi
- @echo " "
@echo ">>> exim_dumpdb utility built"
@echo " "
OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
exim_fixdb: $(OBJ_FIXDB)
- $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
+ @echo "$(LNCC) -o exim_fixdb"
+ $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_fixdb; \
$(STRIP_COMMAND) exim_fixdb; \
fi
- @echo " "
@echo ">>> exim_fixdb utility built"
@echo " "
OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
exim_tidydb: $(OBJ_TIDYDB)
- $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
+ @echo "$(LNCC) -o exim_tidydb"
+ $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_tidydb; \
$(STRIP_COMMAND) exim_tidydb; \
fi
- @echo " "
@echo ">>> exim_tidydb utility built"
@echo " "
# The utility for building dbm files
exim_dbmbuild: exim_dbmbuild.o
- $(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
+ @echo "$(LNCC) -o exim_dbmbuild"
+ $(FE)$(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_dbmbuild; \
$(STRIP_COMMAND) exim_dbmbuild; \
fi
- @echo " "
@echo ">>> exim_dbmbuild utility built"
@echo " "
# The utility for locking a mailbox while messing around with it
exim_lock: exim_lock.c
- $(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
- $(LNCC) -o exim_lock $(LFLAGS) exim_lock.o \
+ @echo "$(CC) exim_lock.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
+ @echo "$(LNCC) -o exim_lock"
+ $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o \
$(LIBS) $(EXTRALIBS)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_lock; \
$(STRIP_COMMAND) exim_lock; \
fi
- @echo " "
@echo ">>> exim_lock utility built"
@echo " "
eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) pcre/libpcre.a \
../exim_monitor/em_version.c
- $(CC) -o em_version.o -c \
+ @echo "$(CC) exim_monitor/em_version.c"
+ $(FE)$(CC) -o em_version.o -c \
$(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
- $(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
+ @echo "$(LNCC) -o eximon.bin"
+ $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
$(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 pcre/libpcre.a \
$(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) eximon.bin; \
$(STRIP_COMMAND) eximon.bin; \
fi
- @echo " "
@echo ">>> exim monitor binary built"
@echo " "
PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../globals.h ../local_scan.h ../macros.h ../mytypes.h ../structs.h
.SUFFIXES: .o .c
-.c.o:; $(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
+.c.o:; @echo "$(CC) $*.c"
+ $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
# This is the dummy module for use by test compiles of individual modules. It
# contains functions such as log_write() that may be called from bits of Exim
# Compile instructions for perl.o for when EXIM_PERL is set
perl.o: $(HDRS) perl.c
- $(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
+ @echo "$(PERL_CC) perl.c"
+ $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
# Compile instructions for the database utility modules
exim_dumpdb.o: $(HDRS) exim_dbutil.c
- $(CC) -c $(CFLAGS) $(INCLUDE) \
+ @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DEXIM_DUMPDB \
-o exim_dumpdb.o exim_dbutil.c
exim_fixdb.o: $(HDRS) exim_dbutil.c
- $(CC) -c $(CFLAGS) $(INCLUDE) \
+ @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DEXIM_FIXDB \
-o exim_fixdb.o exim_dbutil.c
exim_tidydb.o: $(HDRS) exim_dbutil.c
- $(CC) -c $(CFLAGS) $(INCLUDE) \
+ @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DEXIM_TIDYDB \
-o exim_tidydb.o exim_dbutil.c
# Compile instructions for exim_dbmbuild
exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
- $(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
+ @echo "$(CC) exim_dbmbuild.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
# Utilities use special versions of some modules - typically with debugging
# calls cut out.
util-spool_in.o: $(HDRS) spool_in.c
- $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
+ @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
util-store.o: $(HDRS) store.c
- $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
+ @echo "$(CC) -DCOMPILE_UTILITY store.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
util-string.o: $(HDRS) string.c
- $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
+ @echo "$(CC) -DCOMPILE_UTILITY string.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
util-os.o: $(HDRS) os.c
- $(CC) -c $(CFLAGS) $(INCLUDE) \
+ @echo "$(CC) -DCOMPILE_UTILITY os.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DOS_LOAD_AVERAGE \
-DFIND_RUNNING_INTERFACES \
# from a source whose location is set by configuration.
local_scan.o: Makefile local_scan.h ../$(LOCAL_SCAN_SOURCE)
- $(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
+ @echo "$(CC) local_scan.c"
+ $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
# Dependencies for the "ordinary" exim modules
em_xs.o: ../exim_monitor/em_xs.c ../exim_monitor/em_hdr.h
em_version.o: ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
$(MONBIN): $(HDRS)
- $(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
+ @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
+ $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
../exim_monitor/`echo $@ | sed 's/o$$/c/'`
buildpcre:
@(cd pcre; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" \
- CFLAGS="$(CFLAGS) $(PCRE_CFLAGS)" \
+ FE="$(FE)" CFLAGS="$(CFLAGS) $(PCRE_CFLAGS)" \
RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)")
@if $(SHELL) $(SCRIPTS)/newer pcre/libpcre.a exim; then \
rm -f exim eximon.bin; fi
+ @echo " "
# The lookups library.
buildlookups:
@cd lookups; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
- RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"; \
echo " "
buildrouters:
@cd routers; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
- RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
echo " "
buildtransports:
@cd transports; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
- RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
echo " "
buildauths:
@cd auths; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
- RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
echo " "
projects / exim.git / blobdiff