-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.266 2005/11/21 10:24:02 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.333 2006/03/17 09:39:00 ph10 Exp $
Change log file for Exim from version 4.21
-------------------------------------------
+Exim version 4.61
+-----------------
+
+PH/01 The code for finding all the local interface addresses on a FreeBSD
+ system running IPv6 was broken. This may well have applied to all BSD
+ systems, as well as to others that have similar system calls. The broken
+ code found IPv4 interfaces correctly, but gave incorrect values for the
+ IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was
+ that it would not match correctly against @[] and not recognize the IPv6
+ addresses as local.
+
+PH/02 The ipliteral router was not recognizing addresses of the form user@
+ [ipv6:....] because it didn't know about the "ipv6:" prefix.
+
+PH/03 Added disable_ipv6.
+
+PH/04 Changed $reply_address to use the raw form of the headers instead of the
+ decoded form, because it is most often used to construct To: headers
+ lines in autoreplies, and the decoded form may well be syntactically
+ invalid. However, $reply_address has leading white space removed, and all
+ newlines turned into spaces so that the autoreply transport does not
+ grumble.
+
+PH/05 If group was specified without a user on a router, and no group or user
+ was specified on a transport, the group from the router was ignored.
+
+PH/06 Increased the number of ACL variables to 20 of each type, and arranged
+ for visible compile-time settings that can be used to change these
+ numbers, for those that want even more. Backwards compatibility with old
+ spool files has been maintained. However, going back to a previous Exim
+ release will lost any variables that are in spool files.
+
+PH/07 Two small changes when running in the test harness: increase delay when
+ passing a TCP/IP connection to a new process, in case the original
+ process has to generate a bounce, and remove special handling of
+ 127.0.0.2 (sic), which is no longer necessary.
+
+PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to
+ be the same on different OS.
+
+PH/09 Moved a debug statement in filter processing to avoid a race problem when
+ testing.
+
+JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:"
+ whether --show-vars was specified or not
+
+JJ/02 exipick: Added support for new ACL variable spool format introduced
+ in 4.61-PH/06
+
+PH/10 Fixed another bug related to PH/04 above: if an incoming message had a
+ syntactically invalid From: or Reply-to: line, and a filter used this to
+ generate an autoreply, and therefore failed to obtain an address for the
+ autoreply, Exim could try to deliver to a non-existent relative file
+ name, causing unrelated and misleading errors. What now happens is that
+ it logs this as a hard delivery error, but does not attempt to create a
+ bounce message.
+
+PH/11 The exinext utility has a -C option for testing purposes, but although
+ the given file was scanned by exinext itself; it wasn't being passed on
+ when Exim was called.
+
+PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as
+ an end-of-file indication when reading a command response.
+
+PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was
+ compiled. In many other places in Exim, IPv6 addresses are always
+ recognized, so I have changed this. It also means that IPv4 domain
+ literals of the form [IPV4:n.n.n.n] are now always recognized.
+
+PH/14 When a uid/gid is specified for the queryprogram router, it cannot be
+ used if the router is not running as root, for example, when verifying at
+ ACL time, or when using -bh. The debugging output from this situation was
+ non-existent - all you got was a failure to exec. I have made two
+ changes:
+
+ (a) Failures to set uid/gid, the current directory, or a process leader
+ in a subprocess such as that created by queryprogram now generate
+ suitable debugging ouput when -d is set.
+
+ (b) The queryprogram router detects when it is not running as root,
+ outputs suitable debugging information if -d is set, and then runs
+ the subprocess without attempting to change uid/gid.
+
+PH/15 Minor change to Makefile for building test_host (undocumented testing
+ feature).
+
+PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the
+ additional section of a DNS packet that returns MX or SRV records.
+ Instead, it always explicitly searches for A/AAAA records. This avoids
+ major problems that occur when a DNS server includes only records of one
+ type (A or AAAA) in an MX/SRV packet. A byproduct of this change has
+ fixed another bug: if SRV records were looked up and the corresponding
+ address records were *not* found in the additional section, the port
+ values from the SRV records were lost.
+
+PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not
+ using the correct key (the original address) when searching the retry
+ rules in order to find which one to use for generating the retry hint.
+
+PH/18 If quota_warn_message contains a From: header, Exim now refrains from
+ adding the default one. Similarly, if it contains a Reply-To: header, the
+ errors_reply_to option, if set, is not used.
+
+PH/19 When calculating a retry time, Exim used to measure the "time since
+ failure" by looking at the "first failed" field in the retry record. Now
+ it does not use this if it is later than than the arrival time of the
+ message. Instead it uses the arrival time. This makes for better
+ behaviour in cases where some deliveries succeed, thus re-setting the
+ "first failed" field. An example is a quota failure for a huge message
+ when small messages continue to be delivered. Without this change, the
+ "time since failure" will always be short, possible causing more frequent
+ delivery attempts for the huge message than are intended.
+
+PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as
+ $1, $2, $3) because the numerical variables can be reset during some
+ expansion items (e.g. "match"), thereby losing the authentication data.
+
+PH/21 Make -bV show the size of off_t variables so that the test suite can
+ decide whether to run tests for quotas > 2G.
+
+PH/22 Test the values given for quota, quota_filecount, quota_warn_threshold,
+ mailbox_size, and mailbox_filecount in the appendfile transport. If a
+ filecount value is greater than 2G or if a quota value is greater than 2G
+ on a system where the size of off_t is not greater than 4, a panic error
+ is given.
+
+PH/23 When a malformed item such as 1.2.3/24 appears in a host list, it can
+ never match. The debug and -bh output now contains an explicit error
+ message indicating a malformed IPv4 address or mask.
+
+PH/24 An host item such as 1.2.3.4/abc was being treated as the IP address
+ 1.2.3.4 without a mask. Now it is not recognized as an IP address, and
+ PH/23 above applies.
+
+PH/25 Do not write to syslog when running in the test harness. The only
+ occasion when this arises is a failure to open the main or panic logs
+ (for which there is an explicit test).
+
+PH/26 Added the /no_tell option to "control=freeze".
+
+PH/27 If a host name lookup failed very early in a connection, for example, if
+ the IP address matched host_lookup and the reverse lookup yielded a name
+ that did not have a forward lookup, an error message of the form "no IP
+ address found for host xxx.xxx.xxx (during SMTP connection from NULL)"
+ could be logged. Now it outputs the IP address instead of "NULL".
+
+PH/28 An enabling patch from MH: add new function child_open_exim2() which
+ allows the sender and the authenticated sender to be set when
+ submitting a message from within Exim. Since child_open_exim() is
+ documented for local_scan(), the new function should be too.
+
+PH/29 In GnuTLS, a forced expansion failure for tls_privatekey was not being
+ ignored. In both GnuTLS and OpenSSL, an expansion of tls_privatekey that
+ results in an empty string is now treated as unset.
+
+PH/30 Fix eximon buffer overflow bug (Bugzilla #73).
+
+PH/31 Added sender_verify_fail logging option.
+
+PH/32 In November 2003, the code in Exim that added an empty Bcc: header when
+ needed by RFC 822 but not by RFC 2822 was commented out. I have now
+ tidied the source and removed it altogether.
+
+PH/33 When a queue run was abandoned because the load average was too high, a
+ log line was always written; now it is written only if the queue_run log
+ selector is set. In addition, the log line for abandonment now contains
+ information about the queue run such as the pid. This is always present
+ in "start" and "stop" lines but was omitted from the "abandon" line.
+
+PH/34 Omit spaces between a header name and the colon in the error message that
+ is given when verify = headers_syntax fails (if there are lots of them,
+ the message gets confusing).
+
+PH/35 Change the default for dns_check_names_pattern to allow slashes within
+ names, as there are now some PTR records that contain slashes. This check
+ is only to protect against broken name servers that fall over on strange
+ characters, so the fact that it applies to all lookups doesn't matter.
+
+PH/36 Now that the new test suite is complete, we can remove some of the
+ special code in Exim that was needed for the old test suite. For example,
+ sorting DNS records because real resolvers return them in an arbitrary
+ order. The new test suite's fake resolver always returns records in the
+ same order.
+
+PH/37 When running in the test harness, use -odi for submitted messages (e.g.
+ bounces) except when queue_only is set, to avoid logging races between
+ the different processes.
+
+PH/38 Panic-die if .include specifies a non-absolute path.
+
+PH/39 A tweak to the "H" retry rule from its user.
+
+JJ/03 exipick: Removed parentheses from 'next' and 'last' calls that specified
+ a label. They prevented compilation on older perls.
+
+JJ/04 exipick: Refactored code to prevent implicit split to @_ which caused
+ a warning to be raised on newish perls.
+
+JJ/05 exipick: Fixed bug where -bpc always showed a count of all messages
+ on queue. Changes to match documented behaviour of showing count of
+ messages matching specified criteria.
+
+PH/40 Changed the default ident timeout from 30s to 5s.
+
+PH/41 Added support for the use of login_cap features, on those BSD systems
+ that have them, for controlling the resources used by pipe deliveries.
+
+PH/42 The content-scanning code uses fopen() to create files in which to put
+ message data. Previously it was not paying any attention to the mode of
+ the files. Exim runs with umask(0) because the rest of the code creates
+ files with open(), and sets the required mode explicitly. Thus, these
+ files were ending up world-writeable. This was not a big issue, because,
+ being within the spool directory, they were not world-accessible. I have
+ created a function called modefopen, which takes an additional mode
+ argument. It sets umask(777), creates the file, chmods it to the required
+ mode, then resets the umask. All the relevant calls to fopen() in the
+ content scanning code have been changed to use this function.
+
+PH/43 If retry_interval_max is set greater than 24 hours, it is quietly reset
+ to 24 hours. This avoids potential overflow problems when processing G
+ and H retry rules. I suspect nobody ever tinkers with this value.
+
+PH/44 Added STRIP_COMMAND=/usr/bin/strip to the FreeBSD Makefile.
+
+PH/45 When the plaintext authenticator is running as a client, the server's
+ challenges are checked to ensure they are valid base64 strings. By
+ default, the authentication attempt is cancelled if an invalid string is
+ received. Setting client_ignore_invalid_base64 true ignores these errors.
+ The decoded challenge strings are now placed in $auth1, $auth2, etc. as
+ they are received. Thus, the responses can be made to depend on the
+ challenges. If an invalid string is ignored, an empty string is placed in
+ the variable.
+
+PH/46 Messages that are created by the autoreply transport now contains a
+ References: header, in accordance with RFCs 2822 and 3834.
+
+PH/47 Added authenticated_sender_force to the smtp transport.
+
+PH/48 The ${prvs expansion was broken on systems where time_t was long long.
+
+PH/49 Installed latest patch from the Sieve maintainer.
+
+PH/50 When an Exim quota was set without a file count quota, and mailbox_size
+ was also set, the appendfile transport was unnecessarily scanning a
+ directory of message files (e.g. for maildir delivery) to find the count
+ of files (along with the size), even though it did not need this
+ information. It now does the scan only if it needs to find either the
+ size of the count of files.
+
+PH/51 Added ${time_eval: to convert Exim time strings into seconds.
+
+PH/52 Two bugs concerned with error handling when the smtp transport is
+ used in LMTP mode:
+
+ (i) Exim was not creating retry information for temporary errors given
+ for individual recipients after the DATA command when the smtp transport
+ was used in LMTP mode. This meant that they could be retried too
+ frequently, and not timed out correctly.
+
+ (ii) Exim was setting the flag that allows error details to be returned
+ for LMTP errors on RCPT commands, but not for LMTP errors for individual
+ recipients that were returned after the DATA command.
+
+PH/53 This is related to PH/52, but is more general: for any failing address,
+ when detailed error information was permitted to be returned to the
+ sender, but the error was temporary, then after the final timeout, only
+ "retry timeout exceeded" was returned. Now it returns the full error as
+ well as "retry timeout exceeded".
+
+PH/54 Added control=allow_auth_unadvertised, as it seems there are clients that
+ do this, and (what is worse) MTAs that accept it.
+
+PH/55 Added the add_header modified to ACLs. The use of "message" with "warn"
+ will now be deprecated.
+
+PH/56 New os.c-cygwin from the Cygwin maintainer.
+
+JJ/06 exipick: added --unsorted option to allow unsorted output in all output
+ formats (previously only available in exim formats via -bpr, -bpru,
+ and -bpra. Now also available in native and exiqgrep formats)
+
+JJ/07 exipick: added --freeze and --thaw options to allow faster interaction
+ with very large, slow to parse queues
+
+JJ/08 exipick: added ! as generic prefix to negate any criteria format
+
+JJ/09 exipick: miscellaneous performance enhancements (~24% improvements)
+
+PH/57 Tidies in SMTP dialogue display in debug output: (i) It was not showing
+ responses to authentication challenges, though it was showing the
+ challenges; (ii) I've removed the CR characters from the debug output for
+ SMTP output lines.
+
+PH/58 Allow for the insertion of a newline as well as a space when a string
+ is turned into more than one encoded-word during RFC 2047 encoding. The
+ Sieve code now uses this.
+
+PH/59 Added the following errors that can be detected in retry rules: mail_4xx,
+ data_4xx, lost_connection, tls_required.
+
+PH/60 When a VRFY deferred or FAILED, the log message rather than the user
+ message was being sent as an SMTP response.
+
+PH/61 Add -l and -k options to exicyclog.
+
+PH/62 When verifying, if an address was redirected to one new address, so that
+ verification continued, and the new address failed or deferred after
+ having set something in $address_data, the value of $address_data was not
+ passed back to the ACL. This was different to the case when no
+ redirection occurred. The value is now passed back in both cases.
+
+PH/63 Changed the macro HAVE_LOGIN_CAP (see PH/41 for this release above) to
+ HAVE_SETCLASSRESOURCES because there are different APIs in use that all
+ use login_cap.h, so on its own it isn't the distinguishing feature. The
+ new name refers directly to the setclassresources() function.
+
+PH/65 Added configuration files for NetBSD3.
+
+PH/66 Updated OS/Makefile-HP-UX for gcc 4.1.0 with HP-UX 11.
+
+
Exim version 4.60
-----------------
PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists
(Bugzilla #53).
+PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated
+ canonical form (as documented). However, after a host name lookup from
+ the IP address, check_host() was doing a simple string comparison with
+ addresses acquired from the DNS when checking that the found name did
+ have the original IP as one of its addresses. Since any found IPv6
+ addresses are likely to be in abbreviated form, the comparison could
+ fail. Luckily, there already exists a function for doing the comparison
+ by converting both addresses to binary, so now that is used instead of
+ the text comparison.
+
+PH/20 There was another similar case to PH/19, when a complete host name was
+ given in a host list; looking up its IP address could give an abbreviated
+ form, whereas the current host's name might or might not be abbreviated.
+ The same fix has been applied.
+
Exim version 4.54
-----------------
PH/05 Some modifications to the interface to the fake nameserver for the new
testing suite.
-PH/06 Add ${if def:sender_address {(envelope-from <$sender_address>)\n\t}}
- into the default Received: header string.
-
Exim version 4.53
projects / exim.git / blobdiff