Don't panic if the attempt to create the spool directory fails and the
[exim.git] / doc / doc-txt / ChangeLog
index d920ada8bb6afd86575ba2a697ec4bbd93fc29a0..31789929dd06c3cc5940661bcae29279d3def489 100644 (file)
@@ -1,8 +1,124 @@
-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.163 2005/06/17 13:52:14 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.210 2005/08/23 10:29:10 ph10 Exp $
 
 Change log file for Exim from version 4.21
 -------------------------------------------
 
+Exim version 4.53
+-----------------
+
+TK/01 Added the "success_on_redirect" address verification option. See
+      NewStuff for rationale and an example.
+
+PH/01 Added support for SQLite, basic code supplied by David Woodhouse.
+
+PH/02 Patch to exigrep to allow it to work on syslog lines.
+
+PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of
+      fread() to skip over the body file's header line, because in Cygwin the
+      header line is locked and is inaccessible.
+
+PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both
+      co-exist for some time) to make it clear that it is the Exim ID that is
+      referenced, not the Message-ID: header line.
+
+PH/05 Replaced all Tom's calls to snprintf() with calls to the internal
+      string_format() function, because snprintf() does not exist on all
+      operating systems.
+
+PH/06 The use of forbid_filter_existstest now also locks out the use of the
+      ${stat: expansion item.
+
+PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP
+      protocol synchronization error", to keep the pedants happy.
+
+PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
+      well as for IRIX systems, when gcc is being used. See the host.c source
+      file for comments.
+
+PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
+
+PH/10 Named domain lists were not working if used in a queue_smtp_domains
+      setting.
+
+PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
+      transport and to the smtp transport in LMTP mode.
+
+TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
+
+PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
+      run a filter in a subprocess. This could lead to confusion in subsequent
+      lookups in the parent process. There should also be a search_tidyup() at
+      the end of the subprocess.
+
+PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
+      only if the host matched helo_try_verify_hosts, which caused the
+      verification to occur when the EHLO/HELO command was issued. The ACL just
+      tested the remembered result. Now, if a previous verification attempt has
+      not happened, "verify = helo" does it there and then.
+
+JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04)
+
+TK/03 Fix log output including CR from clamd.
+
+PH/14 A reference to $reply_address when Reply-to: was empty and From: did not
+      exist provoked a memory error which could cause a segfault.
+
+PH/15 Installed PCRE 6.2
+
+PH/17 Defined BIND_8_COMPAT in the Darwin os.h file.
+
+PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause
+      of the problem. Specifically, suggested +O2 rather than +O1 for the
+      HP-UX compiler.
+
+PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch).
+
+PH/20 If a delivery was routed to a non-standard port by means of an SRV
+      record, the port was not correctly logged when the outgoing_port log
+      selector was set (it logged the transort's default port).
+
+PH/21 Added support for host-specific ports to manualroute, queryprogram,
+      fallback_hosts, and "hosts" in the smtp transport.
+
+PH/22 If the log selector "outgoing_port" is set, the port is now also given on
+      host errors such as "Connection refused".
+
+PH/23 Applied a patch to fix problems with exim-4.52 while doing radius
+      authentication with radiusclient 0.4.9:
+
+      - Error returned from rc_read_config was caught wrongly
+      - Username/password not passed on to radius server due to wrong length.
+
+      The presumption is that some radiusclient API changes for 4.51/PH/17
+      were not taken care of correctly. The code is still untested by me (my
+      Linux distribution still has 0.3.2 of radiusclient), but it was
+      contributed by a Radius user.
+
+PH/24 When doing a callout, the value of $domain wasn't set correctly when
+      expanding the "port" option of the smtp transport.
+
+TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met
+      while reading a MIME header. Thanks to Tom Hughes for a patch.
+
+PH/24 Include config.h inside local_scan.h so that configuration settings are
+      available.
+
+PH/25 Make $smtp_command_argument available after all SMTP commands. This means
+      that in an ACL for RCPT (for example), you can examine exactly what was
+      received.
+
+PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO
+      commands, but it was not correctly comparing the address with the actual
+      client host address. Thus, it would show the EHLO address in Received:
+      header lines when this was not necessary.
+
+PH/27 Added the % operator to ${eval:}.
+
+PH/28 Exim tries to create and chdir to its spool directory when it starts;
+      it should be ignoring failures (because with -C, for example, it has lost
+      privilege). It wasn't ignoring creation failures other than "already
+      exists".
+
 
 Exim version 4.52
 -----------------
@@ -160,6 +276,95 @@ PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to
       "%lld" and "long long". Replaced the call to snprintf() with a call to
       string_vformat().
 
+PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX
+      records point to non-existent hosts", "retry timeout exceeded", and
+      "retry time not reached for any host after a long failure period".
+
+PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with
+      experimental DomainKeys support:
+
+      (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken.
+      (2) On an error such as an illegally used "control", the wrong name for
+          the control was given.
+
+      These problems did NOT occur unless DomainKeys support was compiled.
+
+PH/23 Added daemon_startup_retries and daemon_startup_sleep.
+
+PH/24 Added ${if match_ip condition.
+
+PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints
+      databases so that it will be absolutely obvious if a crash occurs in the
+      DB library. This is a regular occurrence (often caused by mis-matched
+      db.h files).
+
+PH/26 Insert a lot of missing (void) casts for functions such as chown(),
+      chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were
+      picked up on a user's system that detects such things. There doesn't seem
+      to be a gcc warning option for this - only an attribute that has to be
+      put on the function's prototype. It seems that in Fedora Core 4 they have
+      set this on a number of new functions. No doubt there will be more in due
+      course.
+
+PH/27 If a dnslookup or manualroute router is set with verify=only, it need not
+      specify a transport. However, if an address that was verified by such a
+      router was the subject of a callout, Exim crashed because it tried to
+      read the rcpt_include_affixes from the non-existent transport. Now it
+      just assumes that the setting of that option is false. This bug was
+      introduced by 4.51/PH/31.
+
+PH/28 Changed -d+all to exclude +memory, because that information is very
+      rarely of interest, but it makes the output a lot bigger. People tend to
+      do -d+all out of habit.
+
+PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the
+      code in os-type was giving problems when libc.so lives in lib64, like on
+      x86_64 Fedora Core.
+
+PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
+      aren't the modern standard, and it seems that some systems' include files
+      don't always have them. Exim was already checking for some of the newer
+      ones like T_AAAA, and defining it itself. I've added checks for all the
+      record types that Exim uses.
+
+PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was
+      not automatically generating a new one, as it is supposed to. This
+      prevented TLS from working. If the file did exist, but contained invalid
+      data, a new version was generated, as expected. It was only the case of a
+      non-existent file that was broken.
+
+TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction
+      with a change in libdomainkeys > 0.64.
+
+TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
+      from DNS. If the selector record carries the flag, it now has
+      precedence over the domain-wide flag.
+
+TK/12 Cleared some compiler warnings related to SPF, SRS and DK code.
+
+PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as
+      the use of a port name that isn't defined in /etc/services) occurred, the
+      message was deferred as in a normal delivery, and thus remained on the
+      spool, instead of being failed because of the mua_wrapper setting. This
+      is now fixed, and I tidied up some of the mua_wrapper messages at the
+      same time.
+
+SC/08 Eximstats: whilst parsing the mainlog(s), store information about
+      the messages in a hash of arrays rather than using individual hashes.
+      This is a bit cleaner and results in dramatic memory savings, albeit
+      at a slight CPU cost.
+
+SC/09 Eximstats: added the -show_rt<list> and the -show_dt<list> flags
+      as requested by Marc Sherman.
+
+SC/10 Eximstats: added histograms for user specified patterns as requested
+      by Marc Sherman.
+
+SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified.
+
+PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of
+      fopen() in the content-scanning modules that did not already have it.
+
 
 Exim version 4.51
 -----------------