This condition turns a string holding a true or false representation into
a boolean state. It parses &"true"&, &"false"&, &"yes"& and &"no"&
(case-insensitively); also positive integer numbers map to true if non-zero,
-false if zero. Leading and trailing whitespace is ignored.
+false if zero.
+An empty string is treated as false.
+Leading and trailing whitespace is ignored;
+thus a string consisting only of whitespace is false.
All other string values will result in expansion failure.
When combined with ACL variables, this expansion condition will let you
.code
AUTH_CRAM_MD5=yes
AUTH_CYRUS_SASL=yes
+.new
+AUTH_DOVECOT=yes
+AUTH_GSASL=yes
+AUTH_HEIMDAL_GSSAPI=yes
+.wen
AUTH_PLAINTEXT=yes
AUTH_SPA=yes
.endd
in &_Local/Makefile_&, respectively. The first of these supports the CRAM-MD5
authentication mechanism (RFC 2195), and the second provides an interface to
-the Cyrus SASL authentication library. The third can be configured to support
+the Cyrus SASL authentication library.
+.new
+The third is an interface to Dovecot's authentication system, delegating the
+work via a socket interface.
+The fourth provides an interface to the GNU SASL authentication library, which
+provides mechanisms but typically not data sources.
+The fifth provides direct access to Heimdal GSSAPI, geared for Kerberos, but
+supporting setting a server keytab.
+The sixth can be configured to support
the PLAIN authentication mechanism (RFC 2595) or the LOGIN mechanism, which is
-not formally documented, but used by several MUAs. The fourth authenticator
+not formally documented, but used by several MUAs. The seventh authenticator
supports Microsoft's &'Secure Password Authentication'& mechanism.
+.wen
The authenticators are configured using the same syntax as other drivers (see
section &<<SECTfordricon>>&). If no authenticators are required, no
authenticators, followed by general discussion of the way authentication works
in Exim.
+.new
+&*Beware:*& the meaning of &$auth1$&, &$auth2$&, ... varies on a per-driver and
+per-mechanism basis. Please read carefully to determine which variables hold
+account labels such as usercodes and which hold passwords or other
+authenticating data.
+
+Note that some mechanisms support two different identifiers for accounts: the
+&'authentication id'& and the &'authorization id'&. The contractions &'authn'&
+and &'authz'& are commonly encountered. The American spelling is standard here.
+Conceptually, authentication data such as passwords are tied to the identifier
+used to authenticate; servers may have rules to permit one user to act as a
+second user, so that after login the session is treated as though that second
+user had logged in. That second user is the &'authorization id'&. A robust
+configuration might confirm that the &'authz'& field is empty or matches the
+&'authn'& field. Often this is just ignored. The &'authn'& can be considered
+as verified data, the &'authz'& as an unverified request which the server might
+choose to honour.
+
+A &'realm'& is a text string, typically a domain name, presented by a server
+to a client to help it select an account and credentials to use. In some
+mechanisms, the client and server provably agree on the realm, but clients
+typically can not treat the realm as secure data to be blindly trusted.
+.wen
+
.section "Generic options for authenticators" "SECID168"
is used directly to control authentication. See section &<<SECTplainserver>>&
for details.
+.new
+For the &(gsasl)& authenticator, this option is required for various
+mechanisms; see chapter &<<CHAPgsasl>>& for details.
+.wen
+
For the other authenticators, &%server_condition%& can be used as an additional
authentication or authorization mechanism that is applied after the other
authenticator conditions succeed. If it is set, it is expanded when the
Kerberos, note that because of limitations in the GSSAPI interface,
changing the server keytab might need to be communicated down to the Kerberos
layer independently. The mechanism for doing so is dependent upon the Kerberos
-implementation. For example, for Heimdal, the environment variable KRB5_KTNAME
+implementation.
+.new
+For example, for older releases of Heimdal, the environment variable KRB5_KTNAME
may be set to point to an alternative keytab file. Exim will pass this
variable through from its own inherited environment when started as root or the
Exim user. The keytab file needs to be readable by the Exim user.
+With newer releases of Heimdal, a setuid Exim may cause Heimdal to discard the
+environment variable. In practice, for those releases, the Cyrus authenticator
+is not a suitable interface for GSSAPI (Kerberos) support. Instead, consider
+the &(heimdal_gssapi)& authenticator, described in chapter &<<CHAPheimdalgss>>&
+.wen
.section "Using cyrus_sasl as a server" "SECID178"
.ecindex IIDdcotauth2
+. ////////////////////////////////////////////////////////////////////////////
+. ////////////////////////////////////////////////////////////////////////////
+.new
+.chapter "The gsasl authenticator" "CHAPgsasl"
+.scindex IIDgsaslauth1 "&(gsasl)& authenticator"
+.scindex IIDgsaslauth2 "authenticators" "&(gsasl)&"
+.cindex "authentication" "GNU SASL"
+.cindex "authentication" "SASL"
+.cindex "authentication" "EXTERNAL"
+.cindex "authentication" "ANONYMOUS"
+.cindex "authentication" "PLAIN"
+.cindex "authentication" "LOGIN"
+.cindex "authentication" "DIGEST-MD5"
+.cindex "authentication" "CRAM-MD5"
+.cindex "authentication" "SCRAM-SHA-1"
+The &(gsasl)& authenticator provides server integration for the GNU SASL
+library and the mechanisms it provides. This is new as of the 4.78 release
+and there are a few areas where the library does not let Exim smoothly
+scale to handle future authentication mechanisms, so no guarantee can be
+made that any particular new authentication mechanism will be supported
+without code changes in Exim.
+
+
+.option server_channelbinding gsasl bool false
+Some authentication mechanisms are able to use external context at both ends
+of the session to bind the authentication to that context, and fail the
+authentication process if that context differs. Specifically, some TLS
+ciphersuites can provide identifying information about the cryptographic
+context.
+
+This means that certificate identity and verification becomes a non-issue,
+as a man-in-the-middle attack will cause the correct client and server to
+see different identifiers and authentication will fail.
+
+This is currently only supported when using the GnuTLS library. This is
+only usable by mechanisms which support "channel binding"; at time of
+writing, that's the SCRAM family.
+
+This defaults off to ensure smooth upgrade across Exim releases, in case
+this option causes some clients to start failing. Some future release
+of Exim may switch the default to be true.
+
+
+.option server_hostname gsasl string&!! "see below"
+This option selects the hostname that is used when communicating with the
+library. The default value is &`$primary_hostname`&.
+Some mechanisms will use this data.
+
+
+.option server_mech gsasl string "see below"
+This option selects the authentication mechanism this driver should use. The
+default is the value of the generic &%public_name%& option. This option allows
+you to use a different underlying mechanism from the advertised name. For
+example:
+.code
+sasl:
+ driver = gsasl
+ public_name = X-ANYTHING
+ server_mech = CRAM-MD5
+ server_set_id = $auth1
+.endd
+
+
+.option server_password gsasl string&!! unset
+Various mechanisms need access to the cleartext password on the server, so
+that proof-of-possession can be demonstrated on the wire, without sending
+the password itself.
+
+The data available for lookup varies per mechanism.
+In all cases, &$auth1$& is set to the &'authentication id'&.
+The &$auth2$& variable will always be the &'authorization id'& (&'authz'&)
+if available, else the empty string.
+The &$auth3$& variable will always be the &'realm'& if available,
+else the empty string.
+
+A forced failure will cause authentication to defer.
+
+If using this option, it may make sense to set the &%server_condition%&
+option to be simply "true".
+
+
+.option server_realm gsasl string&!! unset
+This specifies the SASL realm that the server claims to be in.
+Some mechanisms will use this data.
+
+
+.option server_scram_iter gsasl string&!! unset
+This option provides data for the SCRAM family of mechanisms.
+&$auth1$& is not available at evaluation time.
+(This may change, as we receive feedback on use)
+
+
+.option server_scram_salt gsasl string&!! unset
+This option provides data for the SCRAM family of mechanisms.
+&$auth1$& is not available at evaluation time.
+(This may change, as we receive feedback on use)
+
+
+.option server_service gsasl string &`smtp`&
+This is the SASL service that the server claims to implement.
+Some mechanisms will use this data.
+
+
+.section "&(gsasl)& auth variables" "SECTgsaslauthvar"
+.vindex "&$auth1$&, &$auth2$&, etc"
+These may be set when evaluating specific options, as detailed above.
+They will also be set when evaluating &%server_condition%&.
+
+Unless otherwise stated below, the &(gsasl)& integration will use the following
+meanings for these variables:
+
+.ilist
+.vindex "&$auth1$&"
+&$auth1$&: the &'authentication id'&
+.next
+.vindex "&$auth2$&"
+&$auth2$&: the &'authorization id'&
+.next
+.vindex "&$auth3$&"
+&$auth3$&: the &'realm'&
+.endlist
+
+On a per-mechanism basis:
+
+.ilist
+.cindex "authentication" "EXTERNAL"
+EXTERNAL: only &$auth1$& is set, to the possibly empty &'authorization id'&;
+the &%server_condition%& option must be present.
+.next
+.cindex "authentication" "ANONYMOUS"
+ANONYMOUS: only &$auth1$& is set, to the possibly empty &'anonymous token'&;
+the &%server_condition%& option must be present.
+.next
+.cindex "authentication" "GSSAPI"
+GSSAPI: &$auth1$& will be set to the &'authorization id'&,
+&$auth2$& will be set to the &'GSSAPI Display Name'&;
+the &%server_condition%& option must be present.
+.endlist
+
+An &'anonymous token'& is something passed along as an unauthenticated
+identifier; this is analogous to FTP anonymous authentication passing an
+email address, or software-identifier@, as the "password".
+
+.wen
+
+. ////////////////////////////////////////////////////////////////////////////
+. ////////////////////////////////////////////////////////////////////////////
+
+.new
+.chapter "The heimdal_gssapi authenticator" "CHAPheimdalgss"
+.scindex IIDheimdalgssauth1 "&(heimdal_gssapi)& authenticator"
+.scindex IIDheimdalgssauth2 "authenticators" "&(heimdal_gssapi)&"
+.cindex "authentication" "GSSAPI"
+.cindex "authentication" "Kerberos"
+The &(heimdal_gssapi)& authenticator provides server integration for the
+Heimdal GSSAPI/Kerberos library, permitting Exim to set a keytab pathname
+reliably.
+
+.option server_hostname heimdal_gssapi string&!! "see below"
+This option selects the hostname that is used, with &%server_service%&,
+for constructing the GSS server name, as a &'GSS_C_NT_HOSTBASED_SERVICE'&
+identifier. The default value is &`$primary_hostname`&.
+
+.option server_keytab heimdal_gssapi string&!! unset
+If set, then Heimdal will not use the system default keytab (typically
+&_/etc/krb5.keytab_&) but instead the pathname given in this option.
+The value should be a pathname, with no &"file:"& prefix.
+
+.option server_service heimdal_gssapi string&!! "smtp"
+This option specifies the service identifier used, in conjunction with
+&%server_hostname%&, for building the identifer for finding credentials
+from the keytab.
+
+
+.section "&(heimdal_gssapi)& auth variables" "SECTheimdalgssauthvar"
+Beware that these variables will typically include a realm, thus will appear
+to be roughly like an email address already. The &'authzid'& in &$auth2$& is
+not verified, so a malicious client can set it to anything.
+
+The &$auth1$& field should be safely trustable as a value from the Key
+Distribution Center. Note that these are not quite email addresses.
+Each identifier is for a role, and so the left-hand-side may include a
+role suffix. For instance, &"joe/admin@EXAMPLE.ORG"&.
+
+.vindex "&$auth1$&, &$auth2$&, etc"
+.ilist
+.vindex "&$auth1$&"
+&$auth1$&: the &'authentication id'&, set to the GSS Display Name.
+.next
+.vindex "&$auth2$&"
+&$auth2$&: the &'authorization id'&, sent within SASL encapsulation after
+authentication.
+.endlist
+
+.wen
+
. ////////////////////////////////////////////////////////////////////////////
. ////////////////////////////////////////////////////////////////////////////
projects / exim.git / blobdiff