waiting for it by the time it recovers, and sending them in a single SMTP
connection is clearly beneficial. Whenever a delivery to a remote host is
deferred,
-.cindex "hints database"
+.cindex "hints database" "deferred deliveries"
Exim makes a note in its hints database, and whenever a successful
SMTP delivery has happened, it looks to see if any other messages are waiting
for the same host. If any are found, they are sent over the same SMTP
.code
mysql_servers = <value not displayable>
.endd
-If &%configure_file%& is given as an argument, the name of the run time
-configuration file is output.
+If &%config%& is given as an argument, the config is
+output, as it was parsed, any include file resolved, any comment removed.
+
+If &%config_file%& is given as an argument, the name of the run time
+configuration file is output. (&%configure_file%& works too, for
+backward compatibility.)
If a list of configuration files was supplied, the value that is output here
is the name of the file that was actually used.
Exim's configuration file is divided into a number of different parts. General
option settings must always appear at the start of the file. The other parts
are all optional, and may appear in any order. Each part other than the first
-is introduced by the word &"begin"& followed by the name of the part. The
-optional parts are:
+is introduced by the word &"begin"& followed by at least one literal
+space, and the name of the part. The optional parts are:
.ilist
&'ACL'&: Access control lists for controlling incoming SMTP mail (see chapter
The form if &"retry_VAL"& where VAL is an integer.
The default count is set by the main configuration option &%dns_retry%&.
+.new
+.cindex cacheing "of dns lookup"
+.cindex TTL "of dns lookup"
+.cindex DNS TTL
+Dnsdb lookup results are cached within a single process (and its children).
+The cache entry lifetime is limited to the smallest time-to-live (TTL)
+value of the set of returned DNS records.
+.wen
+
.section "Pseudo dnsdb record types" "SECID66"
.cindex "MX record" "in &(dnsdb)& lookup"
set a server-side limit on the time taken to complete a search.
The SERVERS parameter allows you to specify an alternate list of ldap servers
-to use for an individual lookup. The global ldap_servers option provides a
+to use for an individual lookup. The global &%ldap_default_servers%& option provides a
default list of ldap servers, and a single lookup can specify a single ldap
server to use. But when you need to do a lookup with a list of servers that is
different than the default list (maybe different order, maybe a completely
found, but that is still a successful query. In other words, the list of
servers provides a backup facility, not a list of different places to look.
+.new
The &%quote_mysql%&, &%quote_pgsql%&, and &%quote_oracle%& expansion operators
convert newline, tab, carriage return, and backspace to \n, \t, \r, and \b
respectively, and the characters single-quote, double-quote, and backslash
-itself are escaped with backslashes. The &%quote_pgsql%& expansion operator, in
-addition, escapes the percent and underscore characters. This cannot be done
-for MySQL because these escapes are not recognized in contexts where these
-characters are not special.
+itself are escaped with backslashes.
+.wen
.section "Specifying the server in the query" "SECTspeserque"
For MySQL and PostgreSQL lookups (but not currently for Oracle and InterBase),
.section "Special MySQL features" "SECID73"
For MySQL, an empty host name or the use of &"localhost"& in &%mysql_servers%&
causes a connection to the server on the local host by means of a Unix domain
-socket. An alternate socket can be specified in parentheses. The full syntax of
-each item in &%mysql_servers%& is:
+socket. An alternate socket can be specified in parentheses.
+.new
+An option group name for MySQL option files can be specified in square brackets;
+the default value is &"exim"&.
+.wen
+The full syntax of each item in &%mysql_servers%& is:
.display
-<&'hostname'&>::<&'port'&>(<&'socket name'&>)/<&'database'&>/&&&
- <&'user'&>/<&'password'&>
+<&'hostname'&>::<&'port'&>(<&'socket name'&>)[<&'option group'&>]/&&&
+ <&'database'&>/<&'user'&>/<&'password'&>
.endd
-Any of the three sub-parts of the first field can be omitted. For normal use on
+Any of the four sub-parts of the first field can be omitted. For normal use on
the local host it can be left blank or set to just &"localhost"&.
No database need be supplied &-- but if it is absent here, it must be given in
.code
${listextract{-3}{<, x,42,99,& Mailer,,/bin/bash}{result: $value}}
.endd
-yields &"result: 99"&.
+yields &"result: 42"&.
If {<&'string3'&>} is omitted, an empty string is used for string3.
If {<&'string2'&>} is also omitted, the value that was
byte value 127 is converted to &`\x7f`&.
+.new
+.vitem &*${ipv6denorm:*&<&'string'&>&*}*&
+.cindex "&%ipv6denorm%& expansion item"
+.cindex "IP address" normalisation
+This expands an IPv6 address to a full eight-element colon-separated set
+of hex digits including leading zeroes.
+A trailing ipv4-style dotted-decimal set is converted to hex.
+Pure IPv4 addresses are converted to IPv4-mapped IPv6.
+
+.vitem &*${ipv6norm:*&<&'string'&>&*}*&
+.cindex "&%ipv6norm%& expansion item"
+.cindex "IP address" normalisation
+.cindex "IP address" "canonical form"
+This converts an IPv6 address to canonical form.
+Leading zeroes of groups are omitted, and the longest
+set of zero-valued groups is replaced with a double colon.
+A trailing ipv4-style dotted-decimal set is converted to hex.
+Pure IPv4 addresses are converted to IPv4-mapped IPv6.
+.wen
+
+
.vitem &*${lc:*&<&'string'&>&*}*&
.cindex "case forcing in strings"
.cindex "string" "case forcing"
When a &%match%& expansion condition succeeds, these variables contain the
captured substrings identified by the regular expression during subsequent
processing of the success string of the containing &%if%& expansion item.
-However, they do not retain their values afterwards; in fact, their previous
+In the expansion condition case
+they do not retain their values afterwards; in fact, their previous
values are restored at the end of processing an &%if%& item. The numerical
variables may also be set externally by some other matching process which
precedes the expansion of the string. For example, the commands available in
&$originator_uid$&). If Exim re-execs itself, this variable in the new
incarnation normally contains the Exim uid.
-.vitem &$compile_date$&
-.vindex "&$compile_date$&"
-The date on which the Exim binary was compiled.
+.vitem &$callout_address$&
+.vindex "&$callout_address$&"
+After a callout for verification, spamd or malware daemon service, the
+address that was connected to.
.vitem &$compile_number$&
.vindex "&$compile_number$&"
qualified host name. See also &$smtp_active_hostname$&.
+.new
+.vitem &$prdr_requested$&
+.cindex "PRDR" "variable for"
+This variable is set to &"yes"& if PRDR was requested by the client for the
+current message, otherwise &"no"&.
+.wen
+
.vitem &$prvscheck_address$&
This variable is used in conjunction with the &%prvscheck%& expansion item,
which is described in sections &<<SECTexpansionitems>>& and
This variable is set to contain the matching regular expression after a
&%regex%& ACL condition has matched (see section &<<SECTscanregex>>&).
+.vitem "&$regex1$&, &$regex2$&, etc"
+.cindex "regex submatch variables (&$1regex$& &$2regex$& etc)"
+When a &%regex%& or &%mime_regex%& ACL condition succeeds,
+these variables contain the
+captured substrings identified by the regular expression.
+
.vitem &$reply_address$&
.vindex "&$reply_address$&"
. Allow this long option name to split; give it unsplit as a fifth argument
. for the automatic .oindex that is generated by .option.
-.option "extract_addresses_remove_ &~&~arguments" main boolean true &&&
+.option "extract_addresses_remove_arguments" main boolean true &&&
extract_addresses_remove_arguments
.oindex "&%-t%&"
.cindex "command line" "addresses with &%-t%&"
unfortunately not all, operating systems.
-.option tls_advertise_hosts main "host list&!!" unset
+.new
+.option tls_advertise_hosts main "host list&!!" *
+.wen
.cindex "TLS" "advertising"
.cindex "encryption" "on SMTP connection"
.cindex "SMTP" "encrypted connection"
of the STARTTLS command to set up an encrypted session is advertised in
response to EHLO only to those client hosts that match this option. See
chapter &<<CHAPTLS>>& for details of Exim's support for TLS.
+.new
+Note that the default value requires that a certificate be supplied
+using the &%tls_certificate%& option. If no certificate is available then
+the &%tls_advertise_hosts%& option should be set empty.
+.wen
.option tls_certificate main string&!! unset
to ensure that any additional groups associated with the uid are set up.
+.new
+.option max_parallel transports integer&!! unset
+.cindex limit "transport parallelism"
+.cindex transport "parallel processes"
+.cindex transport "concurrency limit"
+.cindex "delivery" "parallelism for transport"
+If this option is set and expands to an integer greater than zero
+it limits the number of concurrent runs of the transport.
+The control does not apply to shadow transports.
+
+.cindex "hints database" "transport concurrency control"
+Exim implements this control by means of a hints database in which a record is
+incremented whenever a transport process is beaing created. The record
+is decremented and possibly removed when the process terminates.
+Obviously there is scope for
+records to get left lying around if there is a system or program crash. To
+guard against this, Exim ignores any records that are more than six hours old.
+
+If you use this option, you should also arrange to delete the
+relevant hints database whenever your system reboots. The names of the files
+start with &_misc_& and they are kept in the &_spool/db_& directory. There
+may be one or two files, depending on the type of DBM in use. The same files
+are used for ETRN and smtp transport serialization.
+.wen
+
+
.option message_size_limit transports string&!! 0
.cindex "limit" "message size per transport"
.cindex "size" "of message, limit"
This option sets up a filtering (in the Unix shell sense) process for messages
at transport time. It should not be confused with mail filtering as set up by
individual users or via a system filter.
+.new
+If unset, or expanding to an empty string, no filtering is done.
+.wen
When the message is about to be written out, the command specified by
&%transport_filter%& is started up in a separate, parallel process, and
delivery, the two pipe transports may be run concurrently. You must ensure that
any pipe commands you set up are robust against this happening. If the commands
write to a file, the &%exim_lock%& utility might be of use.
+.new
+Alternatively the &%max_parallel%& option could be used with a value
+of "1" to enforce serialization.
+.wen
may be one or two files, depending on the type of DBM in use. The same files
are used for ETRN serialization.
+.new
+See also the &%max_parallel%& generic transport option.
+.wen
+
.option size_addition smtp integer 1024
.cindex "SMTP" "SIZE"
PRDR may be used to support per-user content filtering. Without it
one must defer any recipient after the first that has a different
content-filter configuration. With PRDR, the RCPT-time check
-for this can be disabled when the MAIL-time $smtp_command included
-"PRDR". Any required difference in behaviour of the main DATA-time
+.new
+.cindex "PRDR" "variable for"
+for this can be disabled when the variable &$prdr_requested$&
+is &"yes"&.
+.wen
+Any required difference in behaviour of the main DATA-time
ACL should however depend on the PRDR-time ACL having run, as Exim
will avoid doing so in some situations (e.g. single-recipient mails).
received, that is, in an ACL specified by &%acl_smtp_data%& or
&%acl_not_smtp%&. It checks the syntax of all header lines that can contain
lists of addresses (&'Sender:'&, &'From:'&, &'Reply-To:'&, &'To:'&, &'Cc:'&,
-and &'Bcc:'&). Unqualified addresses (local parts without domains) are
+and &'Bcc:'&), returning true if there are no problems.
+Unqualified addresses (local parts without domains) are
permitted only in locally generated messages and from hosts that match
&%sender_unqualified_hosts%& or &%recipient_unqualified_hosts%&, as
appropriate.
warn message = X-Warn: sending host is on dialups list
dnslists = dialups.mail-abuse.org
.endd
-DNS list lookups are cached by Exim for the duration of the SMTP session,
+.cindex cacheing "of dns lookup"
+.cindex DNS TTL
+DNS list lookups are cached by Exim for the duration of the SMTP session
+.new
+(but limited by the DNS return TTL value),
+.wen
so a lookup based on the IP address is done at most once for any incoming
-connection. Exim does not share information between multiple incoming
+connection (assuming long-enough TTL).
+Exim does not share information between multiple incoming
connections (but your local name server cache should be active).
.endd
A timeout causes the ACL to defer.
+.vindex "&$callout_address$&"
+When a connection is made to the scanner the expansion variable &$callout_address$&
+is set to record the actual address used.
+
.vindex "&$malware_name$&"
When a virus is found, the condition sets up an expansion variable called
&$malware_name$& that contains the name of the virus. You can use it in a
Elements after the first for Unix sockets, or second for TCP socket,
are options.
-The supported option are:
+The supported options are:
.code
pri=<priority> Selection priority
weight=<value> Selection bias
used as the list so that multiple spamd servers can be the result of an
expansion.
+.vindex "&$callout_address$&"
+When a connection is made to the server the expansion variable &$callout_address$&
+is set to record the actual address used.
+
.section "Calling SpamAssassin from an Exim ACL" "SECID206"
Here is a simple example of the use of the &%spam%& condition in a DATA ACL:
.code
The conditions returns true if any one of the regular expressions matches. The
&$regex_match_string$& expansion variable is then set up and contains the
matching regular expression.
+The expansion variables &$regex1$& &$regex2$& etc
+are set to any substrings captured by the regular expression.
&*Warning*&: With large messages, these conditions can be fairly
CPU-intensive.
.cindex "log" "delivery line"
The format of the single-line entry in the main log that is written for every
delivery is shown in one of the examples below, for local and remote
-deliveries, respectively. Each example has been split into two lines in order
+deliveries, respectively. Each example has been split into multiple lines in order
to fit it on the page:
.code
2002-10-31 08:59:13 16ZCW1-0005MB-00 => marv
.next
Serializing delivery to a specific host (when &%serialize_hosts%& is set in an
&(smtp)& transport)
+.next
+Limiting the concurrency of specific transports (when &%max_parallel%& is set
+in a transport)
.endlist
projects / exim.git / blobdiff