Docs: add notes on lack of multiple-OCSP-proof support

[exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index 7a0841cb28ced57d9ed879dc830a2353c93cba55..28584912291eab0f900576709c5518a122d933bd 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -11665,8 +11665,11 @@ contain the trailing slash. If &$config_file$& does not contain a slash,
 .vindex "&$config_file$&"
 The name of the main configuration file Exim is using.
 
 .vindex "&$config_file$&"
 The name of the main configuration file Exim is using.
 

+.vitem &$dkim_verify_status$& &&&
+Results of DKIM verification.
+For details see chapter &<<CHAPdkim>>&.
+

 .vitem &$dkim_cur_signer$& &&&
 .vitem &$dkim_cur_signer$& &&&

-       &$dkim_verify_status$& &&&

        &$dkim_verify_reason$& &&&
        &$dkim_domain$& &&&
        &$dkim_identity$& &&&
        &$dkim_verify_reason$& &&&
        &$dkim_domain$& &&&
        &$dkim_identity$& &&&


@@ -17130,8 +17133,13 @@ use when sending messages as a client, you must set the &%tls_certificate%&
 option in the relevant &(smtp)& transport.
 
 .new
 option in the relevant &(smtp)& transport.
 
 .new

+&*Note*&: If you use filenames based on IP addresses, change the list
+separator in the usual way to avoid confusion under IPv6.
+

 &*Note*&: Under current versions of OpenSSL, when a list of more than one
 file is used, the &$tls_in_ourcert$& veriable is unreliable.
 &*Note*&: Under current versions of OpenSSL, when a list of more than one
 file is used, the &$tls_in_ourcert$& veriable is unreliable.

+
+&*Note*&: OCSP stapling is not usable when a list of more than one file is used.

 .wen
 
 If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then
 .wen
 
 If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then


@@ -17273,6 +17281,11 @@ Certificate Authority.
 
 Usable for GnuTLS 3.4.4 or 3.3.17 or OpenSSL 1.1.0 (or later).
 
 
 Usable for GnuTLS 3.4.4 or 3.3.17 or OpenSSL 1.1.0 (or later).
 

+.new
+&*Note*&: There is currently no support for multiple OCSP proofs to match the
+multiple certificates facility.
+.wen
+

 
 .option tls_on_connect_ports main "string list" unset
 .cindex SSMTP
 
 .option tls_on_connect_ports main "string list" unset
 .cindex SSMTP


@@ -27134,7 +27147,7 @@ let the Exim Maintainers know and we'll likely use it).
 .next
 .new
 With GnuTLS, if an explicit list is used for the &%tls_privatekey%& main option
 .next
 .new
 With GnuTLS, if an explicit list is used for the &%tls_privatekey%& main option

-main option, it must be ordered to match the %&tls_certificate%& list.
+main option, it must be ordered to match the &%tls_certificate%& list.

 .wen
 .next
 Some other recently added features may only be available in one or the other.
 .wen
 .next
 Some other recently added features may only be available in one or the other.


@@ -31324,6 +31337,7 @@ address and some time-based randomizing information. The &%prvs%& expansion
 item creates a signed address, and the &%prvscheck%& expansion item checks one.
 The syntax of these expansion items is described in section
 &<<SECTexpansionitems>>&.
 item creates a signed address, and the &%prvscheck%& expansion item checks one.
 The syntax of these expansion items is described in section
 &<<SECTexpansionitems>>&.

+The validity period on signed addresses is seven days.

 
 As an example, suppose the secret per-address keys are stored in an MySQL
 database. A query to look up the key for an address could be defined as a macro
 
 As an example, suppose the secret per-address keys are stored in an MySQL
 database. A query to look up the key for an address could be defined as a macro


@@ -38705,6 +38719,11 @@ dkim_verify_signers = $sender_address_domain:$dkim_signers
 If a domain or identity is listed several times in the (expanded) value of
 &%dkim_verify_signers%&, the ACL is only called once for that domain or identity.
 
 If a domain or identity is listed several times in the (expanded) value of
 &%dkim_verify_signers%&, the ACL is only called once for that domain or identity.
 

+.new
+If multiple signatures match a domain (or identity), the ACL is called once
+for each matching signature.
+.wen
+

 
 Inside the &%acl_smtp_dkim%&, the following expansion variables are
 available (from most to least important):
 
 Inside the &%acl_smtp_dkim%&, the following expansion variables are
 available (from most to least important):


@@ -38717,7 +38736,8 @@ an identity. This is one of the list items from the expanded main option
 &%dkim_verify_signers%& (see above).
 
 .vitem &%$dkim_verify_status%&
 &%dkim_verify_signers%& (see above).
 
 .vitem &%$dkim_verify_status%&

-A string describing the general status of the signature. One of
+Within the DKIM ACL,
+a string describing the general status of the signature. One of

 .ilist
 &%none%&: There is no signature in the message for the current domain or
 identity (as reflected by &%$dkim_cur_signer%&).
 .ilist
 &%none%&: There is no signature in the message for the current domain or
 identity (as reflected by &%$dkim_cur_signer%&).


@@ -38731,6 +38751,22 @@ available in &%$dkim_verify_reason%&.
 &%pass%&: The signature passed verification. It is valid.
 .endlist
 
 &%pass%&: The signature passed verification. It is valid.
 .endlist
 

+.new
+This variable can be overwritten using an ACL 'set' modifier.
+This might, for instance, be done to enforce a policy restriction on
+hash-method or key-size:
+.code
+  warn condition =     ${if eq {$dkim_algo}{rsa-sha1}}
+       condition =     ${if eq {$dkim_verify_status}{pass}}
+       logwrite =      NOTE: forcing dkim verify fail (was pass)
+       set dkim_verify_status = fail
+       set dkim_verify_reason = hash too weak
+.endd
+
+After all the DKIM ACL runs have completed, the value becomes a
+colon-separated list of the values after each run.
+.wen
+

 .vitem &%$dkim_verify_reason%&
 A string giving a little bit more detail when &%$dkim_verify_status%& is either
 "fail" or "invalid". One of
 .vitem &%$dkim_verify_reason%&
 A string giving a little bit more detail when &%$dkim_verify_status%& is either
 "fail" or "invalid". One of


@@ -38751,6 +38787,10 @@ re-written or otherwise changed in a way which is incompatible with
 DKIM verification. It may of course also mean that the signature is forged.
 .endlist
 
 DKIM verification. It may of course also mean that the signature is forged.
 .endlist
 

+.new
+This variable can be overwritten using an ACL 'set' modifier.
+.wen
+

 .vitem &%$dkim_domain%&
 The signing domain. IMPORTANT: This variable is only populated if there is
 an actual signature in the message for the current domain or identity (as
 .vitem &%$dkim_domain%&
 The signing domain. IMPORTANT: This variable is only populated if there is
 an actual signature in the message for the current domain or identity (as