/************************************************* * Exim - an Internet mail transport agent * *************************************************/ /* Copyright (c) University of Cambridge 1995 - 2009 */ /* See the file NOTICE for conditions of use and distribution. */ /* Functions concerned with retrying unsuccessful deliveries. */ #include "exim.h" /************************************************* * Check the ultimate address timeout * *************************************************/ /* This function tests whether a message has been on the queue longer than the maximum retry time for a particular host. Arguments: host_key the key to look up a host retry rule domain the domain to look up a domain retry rule basic_errno a specific error number, or zero if none more_errno additional data for the error now the time Returns: TRUE if the ultimate timeout has been reached */ static BOOL ultimate_address_timeout(uschar *host_key, uschar *domain, int basic_errno, int more_errno, time_t now) { BOOL address_timeout = TRUE; /* no rule => timed out */ retry_config *retry = retry_find_config(host_key+2, domain, basic_errno, more_errno); if (retry != NULL && retry->rules != NULL) { retry_rule *last_rule; for (last_rule = retry->rules; last_rule->next != NULL; last_rule = last_rule->next); DEBUG(D_transport|D_retry) debug_printf(" received_time=%d diff=%d timeout=%d\n", received_time, (int)(now - received_time), last_rule->timeout); address_timeout = (now - received_time > last_rule->timeout); } else { DEBUG(D_transport|D_retry) debug_printf("no retry rule found: assume timed out\n"); } return address_timeout; } /************************************************* * Set status of a host+address item * *************************************************/ /* This function is passed a host_item which contains a host name and an IP address string. Its job is to set the status of the address if it is not already set (indicated by hstatus_unknown). The possible values are: hstatus_usable the address is not listed in the unusable tree, and does not have a retry record, OR the time is past the next try time, OR the message has been on the queue for more than the maximum retry time for a failing host hstatus_unusable the address is listed in the unusable tree, or does have a retry record, and the time is not yet at the next retry time. hstatus_unusable_expired as above, but also the retry time has expired for this address. The reason a delivery is permitted when a message has been around for a very long time is to allow the ultimate address timeout to operate after a delivery failure. Otherwise some messages may stick around without being tried for too long. If a host retry record is retrieved from the hints database, the time of last trying is filled into the last_try field of the host block. If a host is generally usable, a check is made to see if there is a retry delay on this specific message at this host. If a non-standard port is being used, it is added to the retry key. Arguments: domain the address domain host pointer to a host item portstring "" for standard port, ":xxxx" for a non-standard port include_ip_address TRUE to include the address in the key - this is usual, but sometimes is not wanted retry_host_key where to put a pointer to the key for the host-specific retry record, if one is read and the host is usable retry_message_key where to put a pointer to the key for the message+host retry record, if one is read and the host is usable Returns: TRUE if the host has expired but is usable because its retry time has come */ BOOL retry_check_address(uschar *domain, host_item *host, uschar *portstring, BOOL include_ip_address, uschar **retry_host_key, uschar **retry_message_key) { BOOL yield = FALSE; time_t now = time(NULL); uschar *host_key, *message_key; open_db dbblock; open_db *dbm_file; tree_node *node; dbdata_retry *host_retry_record, *message_retry_record; *retry_host_key = *retry_message_key = NULL; DEBUG(D_transport|D_retry) debug_printf("checking status of %s\n", host->name); /* Do nothing if status already set; otherwise initialize status as usable. */ if (host->status != hstatus_unknown) return FALSE; host->status = hstatus_usable; /* Generate the host key for the unusable tree and the retry database. Ensure host names are lower cased (that's what %S does). */ host_key = include_ip_address? string_sprintf("T:%S:%s%s", host->name, host->address, portstring) : string_sprintf("T:%S%s", host->name, portstring); /* Generate the message-specific key */ message_key = string_sprintf("%s:%s", host_key, message_id); /* Search the tree of unusable IP addresses. This is filled in when deliveries fail, because the retry database itself is not updated until the end of all deliveries (so as to do it all in one go). The tree records addresses that have become unusable during this delivery process (i.e. those that will get put into the retry database when it is updated). */ node = tree_search(tree_unusable, host_key); if (node != NULL) { DEBUG(D_transport|D_retry) debug_printf("found in tree of unusables\n"); host->status = (node->data.val > 255)? hstatus_unusable_expired : hstatus_unusable; host->why = node->data.val & 255; return FALSE; } /* Open the retry database, giving up if there isn't one. Otherwise, search for the retry records, and then close the database again. */ if ((dbm_file = dbfn_open(US"retry", O_RDONLY, &dbblock, FALSE)) == NULL) { DEBUG(D_deliver|D_retry|D_hints_lookup) debug_printf("no retry data available\n"); return FALSE; } host_retry_record = dbfn_read(dbm_file, host_key); message_retry_record = dbfn_read(dbm_file, message_key); dbfn_close(dbm_file); /* Ignore the data if it is too old - too long since it was written */ if (host_retry_record == NULL) { DEBUG(D_transport|D_retry) debug_printf("no host retry record\n"); } else if (now - host_retry_record->time_stamp > retry_data_expire) { host_retry_record = NULL; DEBUG(D_transport|D_retry) debug_printf("host retry record too old\n"); } if (message_retry_record == NULL) { DEBUG(D_transport|D_retry) debug_printf("no message retry record\n"); } else if (now - message_retry_record->time_stamp > retry_data_expire) { message_retry_record = NULL; DEBUG(D_transport|D_retry) debug_printf("message retry record too old\n"); } /* If there's a host-specific retry record, check for reaching the retry time (or forcing). If not, and the host is not expired, check for the message having been around for longer than the maximum retry time for this host or address. Allow the delivery if it has. Otherwise set the appropriate unusable flag and return FALSE. Otherwise arrange to return TRUE if this is an expired host. */ if (host_retry_record != NULL) { *retry_host_key = host_key; /* We have not reached the next try time. Check for the ultimate address timeout if the host has not expired. */ if (now < host_retry_record->next_try && !deliver_force) { DEBUG(D_transport|D_retry) { debug_printf("host retry time not reached: checking ultimate address " "timeout\n"); debug_printf(" now=%d first_failed=%d next_try=%d expired=%d\n", (int)now, (int)host_retry_record->first_failed, (int)host_retry_record->next_try, host_retry_record->expired); } if (!host_retry_record->expired && ultimate_address_timeout(host_key, domain, host_retry_record->basic_errno, host_retry_record->more_errno, now)) { DEBUG(D_transport|D_retry) debug_printf("on queue longer than maximum retry for " "address - allowing delivery\n"); return FALSE; } /* We have not hit the ultimate address timeout; host is unusable. */ host->status = (host_retry_record->expired)? hstatus_unusable_expired : hstatus_unusable; host->why = hwhy_retry; host->last_try = host_retry_record->last_try; return FALSE; } /* Host is usable; set return TRUE if expired. */ yield = host_retry_record->expired; } /* It's OK to try the host. If there's a message-specific retry record, check for reaching its retry time (or forcing). If not, mark the host unusable, unless the ultimate address timeout has been reached. */ if (message_retry_record != NULL) { *retry_message_key = message_key; if (now < message_retry_record->next_try && !deliver_force) { DEBUG(D_transport|D_retry) { debug_printf("host+message retry time not reached: checking ultimate " "address timeout\n"); debug_printf(" now=%d first_failed=%d next_try=%d expired=%d\n", (int)now, (int)message_retry_record->first_failed, (int)message_retry_record->next_try, message_retry_record->expired); } if (!ultimate_address_timeout(host_key, domain, 0, 0, now)) { host->status = hstatus_unusable; host->why = hwhy_retry; } else { DEBUG(D_transport|D_retry) debug_printf("on queue longer than maximum retry for " "address - allowing delivery\n"); } return FALSE; } } return yield; } /************************************************* * Add a retry item to an address * *************************************************/ /* Retry items are chained onto an address when it is deferred either by router or by a transport, or if it succeeds or fails and there was a previous retry item that now needs to be deleted. Sometimes there can be both kinds of item: for example, if routing was deferred but then succeeded, and delivery then deferred. In that case there is a delete item for the routing retry, and an updating item for the delivery. (But note that that is only visible at the outer level, because in remote delivery subprocesses, the address starts "clean", with no retry items carried in.) These items are used at the end of a delivery attempt to update the retry database. The keys start R: for routing delays and T: for transport delays. Arguments: addr the address block onto which to hang the item key the retry key flags delete, host, and message flags, copied into the block Returns: nothing */ void retry_add_item(address_item *addr, uschar *key, int flags) { retry_item *rti = store_get(sizeof(retry_item)); rti->next = addr->retries; addr->retries = rti; rti->key = key; rti->basic_errno = addr->basic_errno; rti->more_errno = addr->more_errno; rti->message = addr->message; rti->flags = flags; DEBUG(D_transport|D_retry) { int letter = rti->more_errno & 255; debug_printf("added retry item for %s: errno=%d more_errno=", rti->key, rti->basic_errno); if (letter == 'A' || letter == 'M') debug_printf("%d,%c", (rti->more_errno >> 8) & 255, letter); else debug_printf("%d", rti->more_errno); debug_printf(" flags=%d\n", flags); } } /************************************************* * Find retry configuration data * *************************************************/ /* Search the in-store retry information for the first retry item that applies to a given destination. If the key contains an @ we are probably handling a local delivery and have a complete address to search for; this happens when retry_use_local_part is set on a router. Otherwise, the key is likely to be a host name for a remote delivery, or a domain name for a local delivery. We prepend *@ on the front of it so that it will match a retry item whose address item pattern is independent of the local part. The alternate key, if set, is always just a domain, so we treat it likewise. Arguments: key key for which retry info is wanted alternate alternative key, always just a domain basic_errno specific error predicate on the retry rule, or zero more_errno additional data for errno predicate Returns: pointer to retry rule, or NULL */ retry_config * retry_find_config(uschar *key, uschar *alternate, int basic_errno, int more_errno) { int replace = 0; uschar *use_key, *use_alternate; uschar *colon = Ustrchr(key, ':'); retry_config *yield; /* If there's a colon in the key, there are two possibilities: (1) This is a key for a host, ip address, and possibly port, in the format hostname:ip+port In this case, we temporarily replace the colon with a zero, to terminate the string after the host name. (2) This is a key for a pipe, file, or autoreply delivery, in the format pipe-or-file-or-auto:x@y where x@y is the original address that provoked the delivery. The pipe or file or auto will start with | or / or >, whereas a host name will start with a letter or a digit. In this case we want to use the original address to search for a retry rule. */ if (colon != NULL) { if (isalnum(*key)) replace = ':'; else key = Ustrrchr(key, ':') + 1; /* Take from the last colon */ } if (replace == 0) colon = key + Ustrlen(key); *colon = 0; /* Sort out the keys */ use_key = (Ustrchr(key, '@') != NULL)? key : string_sprintf("*@%s", key); use_alternate = (alternate == NULL)? NULL : string_sprintf("*@%s", alternate); /* Scan the configured retry items. */ for (yield = retries; yield != NULL; yield = yield->next) { uschar *plist = yield->pattern; uschar *slist = yield->senders; /* If a specific error is set for this item, check that we are handling that specific error, and if so, check any additional error information if required. */ if (yield->basic_errno != 0) { /* Special code is required for quota errors, as these can either be system quota errors, or Exim's own quota imposition, which has a different error number. Full partitions are also treated in the same way as quota errors. */ if (yield->basic_errno == ERRNO_EXIMQUOTA) { if ((basic_errno != ERRNO_EXIMQUOTA && basic_errno != errno_quota && basic_errno != ENOSPC) || (yield->more_errno != 0 && yield->more_errno > more_errno)) continue; } /* The TLSREQUIRED error also covers TLSFAILURE. These are subtly different errors, but not worth separating at this level. */ else if (yield->basic_errno == ERRNO_TLSREQUIRED) { if (basic_errno != ERRNO_TLSREQUIRED && basic_errno != ERRNO_TLSFAILURE) continue; } /* Handle 4xx responses to MAIL, RCPT, or DATA. The code that was received is in the 2nd least significant byte of more_errno (with 400 subtracted). The required value is coded in the 2nd least significant byte of the yield->more_errno field as follows: 255 => any 4xx code >= 100 => the decade must match the value less 100 < 100 => the exact value must match */ else if (yield->basic_errno == ERRNO_MAIL4XX || yield->basic_errno == ERRNO_RCPT4XX || yield->basic_errno == ERRNO_DATA4XX) { int wanted; if (basic_errno != yield->basic_errno) continue; wanted = (yield->more_errno >> 8) & 255; if (wanted != 255) { int evalue = (more_errno >> 8) & 255; if (wanted >= 100) { if ((evalue/10)*10 != wanted - 100) continue; } else if (evalue != wanted) continue; } } /* There are some special cases for timeouts */ else if (yield->basic_errno == ETIMEDOUT) { if (basic_errno != ETIMEDOUT) continue; /* Just RTEF_CTOUT in the rule => don't care about 'A'/'M' addresses */ if (yield->more_errno == RTEF_CTOUT) { if ((more_errno & RTEF_CTOUT) == 0) continue; } else if (yield->more_errno != 0) { int cf_errno = more_errno; if ((yield->more_errno & RTEF_CTOUT) == 0) cf_errno &= ~RTEF_CTOUT; if (yield->more_errno != cf_errno) continue; } } /* Default checks for exact match */ else { if (yield->basic_errno != basic_errno || (yield->more_errno != 0 && yield->more_errno != more_errno)) continue; } } /* If the "senders" condition is set, check it. Note that sender_address may be null during -brt checking, in which case we do not use this rule. */ if (slist != NULL && (sender_address == NULL || match_address_list(sender_address, TRUE, TRUE, &slist, NULL, -1, 0, NULL) != OK)) continue; /* Check for a match between the address list item at the start of this retry rule and either the main or alternate keys. */ if (match_address_list(use_key, TRUE, TRUE, &plist, NULL, -1, UCHAR_MAX+1, NULL) == OK || (use_alternate != NULL && match_address_list(use_alternate, TRUE, TRUE, &plist, NULL, -1, UCHAR_MAX+1, NULL) == OK)) break; } *colon = replace; return yield; } /************************************************* * Update retry database * *************************************************/ /* Update the retry data for any directing/routing/transporting that was deferred, or delete it for those that succeeded after a previous defer. This is done all in one go to minimize opening/closing/locking of the database file. Note that, because SMTP delivery involves a list of destinations to try, there may be defer-type retry information for some of them even when the message was successfully delivered. Likewise if it eventually failed. This function may move addresses from the defer to the failed queue if the ultimate retry time has expired. Arguments: addr_defer queue of deferred addresses addr_failed queue of failed addresses addr_succeed queue of successful addresses Returns: nothing */ void retry_update(address_item **addr_defer, address_item **addr_failed, address_item **addr_succeed) { open_db dbblock; open_db *dbm_file = NULL; time_t now = time(NULL); int i; DEBUG(D_retry) debug_printf("Processing retry items\n"); /* Three-times loop to handle succeeded, failed, and deferred addresses. Deferred addresses must be handled after failed ones, because some may be moved to the failed chain if they have timed out. */ for (i = 0; i < 3; i++) { address_item *endaddr, *addr; address_item *last_first = NULL; address_item **paddr = (i==0)? addr_succeed : (i==1)? addr_failed : addr_defer; address_item **saved_paddr = NULL; DEBUG(D_retry) debug_printf("%s addresses:\n", (i == 0)? "Succeeded" : (i == 1)? "Failed" : "Deferred"); /* Loop for each address on the chain. For deferred addresses, the whole address times out unless one of its retry addresses has a retry rule that hasn't yet timed out. Deferred addresses should not be requesting deletion of retry items, but just in case they do by accident, treat that case as "not timed out". As well as handling the addresses themselves, we must also process any retry items for any parent addresses - these are typically "delete" items, because the parent must have succeeded in order to generate the child. */ while ((endaddr = *paddr) != NULL) { BOOL timed_out = FALSE; retry_item *rti; for (addr = endaddr; addr != NULL; addr = addr->parent) { int update_count = 0; int timedout_count = 0; DEBUG(D_retry) debug_printf("%s%s\n", addr->address, (addr->retries == NULL)? ": no retry items" : ""); /* Loop for each retry item. */ for (rti = addr->retries; rti != NULL; rti = rti->next) { uschar *message; int message_length, message_space, failing_interval, next_try; retry_rule *rule, *final_rule; retry_config *retry; dbdata_retry *retry_record; /* Open the retry database if it is not already open; failure to open the file is logged, but otherwise ignored - deferred addresses will get retried at the next opportunity. Not opening earlier than this saves opening if no addresses have retry items - common when none have yet reached their retry next try time. */ if (dbm_file == NULL) dbm_file = dbfn_open(US"retry", O_RDWR, &dbblock, TRUE); if (dbm_file == NULL) { DEBUG(D_deliver|D_retry|D_hints_lookup) debug_printf("retry database not available for updating\n"); return; } /* If there are no deferred addresses, that is, if this message is completing, and the retry item is for a message-specific SMTP error, force it to be deleted, because there's no point in keeping data for no-longer-existing messages. This situation can occur when a domain has two hosts and a message-specific error occurs for the first of them, but the address gets delivered to the second one. This optimization doesn't succeed in cleaning out all the dead entries, but it helps. */ if (*addr_defer == NULL && (rti->flags & rf_message) != 0) rti->flags |= rf_delete; /* Handle the case of a request to delete the retry info for this destination. */ if ((rti->flags & rf_delete) != 0) { (void)dbfn_delete(dbm_file, rti->key); DEBUG(D_retry) debug_printf("deleted retry information for %s\n", rti->key); continue; } /* Count the number of non-delete retry items. This is so that we can compare it to the count of timed_out ones, to check whether all are timed out. */ update_count++; /* Get the retry information for this destination and error code, if any. If this item is for a remote host with ip address, then pass the domain name as an alternative to search for. If no retry information is found, we can't generate a retry time, so there is no point updating the database. This retry item is timed out. */ if ((retry = retry_find_config(rti->key + 2, ((rti->flags & rf_host) != 0)? addr->domain : NULL, rti->basic_errno, rti->more_errno)) == NULL) { DEBUG(D_retry) debug_printf("No configured retry item for %s%s%s\n", rti->key, ((rti->flags & rf_host) != 0)? US" or " : US"", ((rti->flags & rf_host) != 0)? addr->domain : US""); if (addr == endaddr) timedout_count++; continue; } DEBUG(D_retry) { if ((rti->flags & rf_host) != 0) debug_printf("retry for %s (%s) = %s %d %d\n", rti->key, addr->domain, retry->pattern, retry->basic_errno, retry->more_errno); else debug_printf("retry for %s = %s %d %d\n", rti->key, retry->pattern, retry->basic_errno, retry->more_errno); } /* Set up the message for the database retry record. Because DBM records have a maximum data length, we enforce a limit. There isn't much point in keeping a huge message here, anyway. */ message = (rti->basic_errno > 0)? US strerror(rti->basic_errno) : (rti->message == NULL)? US"unknown error" : string_printing(rti->message); message_length = Ustrlen(message); if (message_length > 150) message_length = 150; /* Read a retry record from the database or construct a new one. Ignore an old one if it is too old since it was last updated. */ retry_record = dbfn_read(dbm_file, rti->key); if (retry_record != NULL && now - retry_record->time_stamp > retry_data_expire) retry_record = NULL; if (retry_record == NULL) { retry_record = store_get(sizeof(dbdata_retry) + message_length); message_space = message_length; retry_record->first_failed = now; retry_record->last_try = now; retry_record->next_try = now; retry_record->expired = FALSE; retry_record->text[0] = 0; /* just in case */ } else message_space = Ustrlen(retry_record->text); /* Compute how long this destination has been failing */ failing_interval = now - retry_record->first_failed; DEBUG(D_retry) debug_printf("failing_interval=%d message_age=%d\n", failing_interval, message_age); /* For a non-host error, if the message has been on the queue longer than the recorded time of failure, use the message's age instead. This can happen when some messages can be delivered and others cannot; a successful delivery will reset the first_failed time, and this can lead to a failing message being retried too often. */ if ((rti->flags & rf_host) == 0 && message_age > failing_interval) failing_interval = message_age; /* Search for the current retry rule. The cutoff time of the last rule is handled differently to the others. The rule continues to operate for ever (the global maximum interval will eventually limit the gaps) but its cutoff time determines when an individual destination times out. If there are no retry rules, the destination always times out, but we can't compute a retry time. */ final_rule = NULL; for (rule = retry->rules; rule != NULL; rule = rule->next) { if (failing_interval <= rule->timeout) break; final_rule = rule; } /* If there's an un-timed out rule, the destination has not yet timed out, so the address as a whole has not timed out (but we are interested in this only for the end address). Make sure the expired flag is false (can be forced via fixdb from outside, but ensure it is consistent with the rules whenever we go through here). */ if (rule != NULL) { retry_record->expired = FALSE; } /* Otherwise, set the retry timeout expired, and set the final rule as the one from which to compute the next retry time. Subsequent messages will fail immediately until the retry time is reached (unless there are other, still active, retries). */ else { rule = final_rule; retry_record->expired = TRUE; if (addr == endaddr) timedout_count++; } /* There is a special case to consider when some messages get through to a destination and others don't. This can happen locally when a large message pushes a user over quota, and it can happen remotely when a machine is on a dodgy Internet connection. The messages that get through wipe the retry information, causing those that don't to stay on the queue longer than the final retry time. In order to avoid this, we check, using the time of arrival of the message, to see if it has been on the queue for more than the final cutoff time, and if so, cause this retry item to time out, and the retry time to be set to "now" so that any subsequent messages in the same condition also get tried. We search for the last rule onwards from the one that is in use. If there are no retry rules for the item, rule will be null and timedout_count will already have been updated. This implements "timeout this rule if EITHER the host (or routing or directing) has been failing for more than the maximum time, OR if the message has been on the queue for more than the maximum time." February 2006: It is possible that this code is no longer needed following the change to the retry calculation to use the message age if it is larger than the time since first failure. It may be that the expired flag is always set when the other conditions are met. However, this is a small bit of code, and it does no harm to leave it in place, just in case. */ if (received_time <= retry_record->first_failed && addr == endaddr && !retry_record->expired && rule != NULL) { retry_rule *last_rule; for (last_rule = rule; last_rule->next != NULL; last_rule = last_rule->next); if (now - received_time > last_rule->timeout) { DEBUG(D_retry) debug_printf("on queue longer than maximum retry\n"); timedout_count++; rule = NULL; } } /* Compute the next try time from the rule, subject to the global maximum, and update the retry database. If rule == NULL it means there were no rules at all (and the timeout will be set expired), or we have a message that is older than the final timeout. In this case set the next retry time to now, so that one delivery attempt happens for subsequent messages. */ if (rule == NULL) next_try = now; else { if (rule->rule == 'F') next_try = now + rule->p1; else /* rule = 'G' or 'H' */ { int last_predicted_gap = retry_record->next_try - retry_record->last_try; int last_actual_gap = now - retry_record->last_try; int lastgap = (last_predicted_gap < last_actual_gap)? last_predicted_gap : last_actual_gap; int next_gap = (lastgap * rule->p2)/1000; if (rule->rule == 'G') { next_try = now + ((lastgap < rule->p1)? rule->p1 : next_gap); } else /* The 'H' rule */ { next_try = now + rule->p1; if (next_gap > rule->p1) next_try += random_number(next_gap - rule->p1)/2 + (next_gap - rule->p1)/2; } } } /* Impose a global retry max */ if (next_try - now > retry_interval_max) next_try = now + retry_interval_max; /* If the new message length is greater than the previous one, we have to copy the record first. */ if (message_length > message_space) { dbdata_retry *newr = store_get(sizeof(dbdata_retry) + message_length); memcpy(newr, retry_record, sizeof(dbdata_retry)); retry_record = newr; } /* Set up the retry record; message_length may be less than the string length for very long error strings. */ retry_record->last_try = now; retry_record->next_try = next_try; retry_record->basic_errno = rti->basic_errno; retry_record->more_errno = rti->more_errno; Ustrncpy(retry_record->text, message, message_length); retry_record->text[message_length] = 0; DEBUG(D_retry) { int letter = retry_record->more_errno & 255; debug_printf("Writing retry data for %s\n", rti->key); debug_printf(" first failed=%d last try=%d next try=%d expired=%d\n", (int)retry_record->first_failed, (int)retry_record->last_try, (int)retry_record->next_try, retry_record->expired); debug_printf(" errno=%d more_errno=", retry_record->basic_errno); if (letter == 'A' || letter == 'M') debug_printf("%d,%c", (retry_record->more_errno >> 8) & 255, letter); else debug_printf("%d", retry_record->more_errno); debug_printf(" %s\n", retry_record->text); } (void)dbfn_write(dbm_file, rti->key, retry_record, sizeof(dbdata_retry) + message_length); } /* Loop for each retry item */ /* If all the non-delete retry items are timed out, the address is timed out, provided that we didn't skip any hosts because their retry time was not reached (or because of hosts_max_try). */ if (update_count > 0 && update_count == timedout_count) { if (!testflag(endaddr, af_retry_skipped)) { DEBUG(D_retry) debug_printf("timed out: all retries expired\n"); timed_out = TRUE; } else { DEBUG(D_retry) debug_printf("timed out but some hosts were skipped\n"); } } } /* Loop for an address and its parents */ /* If this is a deferred address, and retry processing was requested by means of one or more retry items, and they all timed out, move the address to the failed queue, and restart this loop without updating paddr. If there were several addresses batched in the same remote delivery, only the original top one will have host retry items attached to it, but we want to handle all the same. Each will have a pointer back to its "top" address, and they will now precede the item with the retries because addresses are inverted when added to these final queues. We have saved information about them in passing (below) so they can all be cut out at once. */ if (i == 2) /* Handling defers */ { if (endaddr->retries != NULL && timed_out) { if (last_first == endaddr) paddr = saved_paddr; addr = *paddr; *paddr = endaddr->next; endaddr->next = *addr_failed; *addr_failed = addr; for (;; addr = addr->next) { setflag(addr, af_retry_timedout); addr->message = (addr->message == NULL)? US"retry timeout exceeded" : string_sprintf("%s: retry timeout exceeded", addr->message); addr->user_message = (addr->user_message == NULL)? US"retry timeout exceeded" : string_sprintf("%s: retry timeout exceeded", addr->user_message); log_write(0, LOG_MAIN, "** %s%s%s%s: retry timeout exceeded", addr->address, (addr->parent == NULL)? US"" : US" <", (addr->parent == NULL)? US"" : addr->parent->address, (addr->parent == NULL)? US"" : US">"); if (addr == endaddr) break; } continue; /* Restart from changed *paddr */ } /* This address is to remain on the defer chain. If it has a "first" pointer, save the pointer to it in case we want to fail the set of addresses when we get to the first one. */ if (endaddr->first != last_first) { last_first = endaddr->first; saved_paddr = paddr; } } /* All cases (succeed, fail, defer left on queue) */ paddr = &(endaddr->next); /* Advance to next address */ } /* Loop for all addresses */ } /* Loop for succeed, fail, defer */ /* Close and unlock the database */ if (dbm_file != NULL) dbfn_close(dbm_file); DEBUG(D_retry) debug_printf("end of retry processing\n"); } /* End of retry.c */