src/OS/Makefile-Base

   1 # This file is the basis of the main makefile for Exim and friends. The
   2 # makefile at the top level arranges to build the main makefile by calling
   3 # scripts/Configure-Makefile from within the build directory. This
   4 # concatentates the configuration settings from Local/Makefile and other,
   5 # optional, Local/* files at the front of this file, to create Makefile in the
   6 # build directory.
   7
   8 SHELL      = $(MAKE_SHELL)
   9 SCRIPTS    = ../scripts
  10 EDITME     = ../Local/Makefile
  11 EXIMON_EDITME = ../Local/eximon.conf
  12
  13 # The compiler used for linking is normally the same as the compiler used for
  14 # compiling. However, by giving it a different name, we can override it from
  15 # the command line, and this is helpful for certain types of testing.
  16
  17 LNCC = $(CC)
  18
  19 # The compile commands can be very long. To make the output look better,
  20 # they are not normally echoed in full. To get full echoing, the caller
  21 # must set FULLECHO='' on the command line and call make with -e. We default
  22 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
  23
  24 FULLECHO = @
  25 FE       = $(FULLECHO)
  26
  27 # The default target double-checks the existence of $(EDITME) and then arranges
  28 # to touch it if it exists and any of the optional configuration files, which
  29 # depend on the os or the architecture, have been altered. The same sub-target
  30 # does the same thing for the eximon configuration file if it exists. Then
  31 # there is a check that the Makefile (the one built from this file) is
  32 # up-to-date. Then the os-specific source files and the C configuration file
  33 # are set up, and finally it goes to the main Exim target.
  34
  35 all:    $(EDITME) checklocalmake Makefile os.h os.c config.h allexim
  36
  37 checklocalmake:
  38         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
  39           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
  40           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
  41         then \
  42           touch $(EDITME); \
  43         fi
  44         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
  45           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
  46           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
  47         then \
  48           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
  49         fi
  50
  51 $(EDITME):
  52         @echo " "
  53         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
  54         @echo "*** appropriate changes for your site."
  55         @echo " "
  56         @false
  57
  58 $(EXIMON_EDITME):
  59         @echo " "
  60         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
  61         @echo "*** appropriate changes for your site."
  62         @echo " "
  63         @test ! -d ../Local && mkdir ../Local
  64         @false
  65
  66 # Check that the local Makefile is up-to-date
  67
  68 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
  69           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
  70         @echo " "
  71         @echo "*** Makefile needs rebuilding"
  72         @echo "*** Please run \"make makefile\" at top level"
  73         @echo " "
  74         @false
  75
  76 # Build (link) the os.h file
  77
  78 os.h:
  79         $(SHELL) $(SCRIPTS)/Configure-os.h
  80
  81 # Build the os.c file
  82
  83 os.c:   ../src/os.c
  84         $(SHELL) $(SCRIPTS)/Configure-os.c
  85
  86 # Build the config.h file.
  87
  88 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
  89         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
  90
  91
  92 # This target is recognized specially by GNU make. It records those targets
  93 # that do not correspond to files that are being built and which should
  94 # therefore always be run, even if the files exist. This shouldn't in fact be a
  95 # problem, but it does no harm. Other make programs will just ignore this.
  96
  97 .PHONY: all allexim buildauths buildlookups buildpdkim buildrouters \
  98         buildtransports checklocalmake clean
  99
 100
 101 # This is the real default target for all the various exim binaries and
 102 # scripts, once the configuring stuff is done.
 103
 104 allexim: config.h $(EXIM_MONITOR) exicyclog exinext exiwhat \
 105         exigrep eximstats exipick exiqgrep exiqsumm \
 106         transport-filter.pl convert4r3 convert4r4 \
 107         exim_checkaccess \
 108         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \
 109         buildlookups buildrouters buildtransports \
 110         buildauths buildpdkim exim
 111
 112
 113 # Targets for special-purpose configuration header builders
 114 buildconfig: buildconfig.c
 115         @echo "$(CC) buildconfig.c"
 116         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
 117
 118
 119 # Target for the exicyclog utility script
 120 exicyclog: Makefile config.h ../src/exicyclog.src
 121         @rm -f exicyclog
 122         @sed \
 123           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 124           -e "/^# /p" \
 125           -e "/^# /d" \
 126           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 127           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
 128           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 129           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 130           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
 131           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
 132           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 133           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
 134           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
 135           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
 136           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
 137           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 138           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
 139           ../src/exicyclog.src > exicyclog-t
 140         @mv exicyclog-t exicyclog
 141         @chmod a+x exicyclog
 142         @echo ">>> exicyclog script built"
 143
 144 # Target for the exinext utility script
 145 exinext: Makefile config.h ../src/exinext.src
 146         @rm -f exinext
 147         @sed \
 148           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 149           -e "/^# /p" \
 150           -e "/^# /d" \
 151           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 152           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 153           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 154           ../src/exinext.src > exinext-t
 155         @mv exinext-t exinext
 156         @chmod a+x exinext
 157         @echo ">>> exinext script built"
 158
 159 # Target for the exiwhat utility script
 160 exiwhat: Makefile config.h ../src/exiwhat.src
 161         @rm -f exiwhat
 162         @sed \
 163           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 164           -e "/^# /p" \
 165           -e "/^# /d" \
 166           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 167           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 168           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 169           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
 170           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
 171           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
 172           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
 173           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
 174           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
 175           ../src/exiwhat.src > exiwhat-t
 176         @mv exiwhat-t exiwhat
 177         @chmod a+x exiwhat
 178         @echo ">>> exiwhat script built"
 179
 180 # Target for the exim_checkaccess utility script
 181 exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
 182         @rm -f exim_checkaccess
 183         @sed \
 184           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 185           -e "/^# /p" \
 186           -e "/^# /d" \
 187           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 188           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 189           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 190           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 191           ../src/exim_checkaccess.src > exim_checkaccess-t
 192         @mv exim_checkaccess-t exim_checkaccess
 193         @chmod a+x exim_checkaccess
 194         @echo ">>> exim_checkaccess script built"; echo ""
 195
 196 # Target for the Exim monitor start-up script
 197 eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \
 198           ../Local/eximon.conf
 199         @rm -f eximon
 200         $(SHELL) $(SCRIPTS)/Configure-eximon
 201         @sed \
 202           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 203           -e "/^# /p" \
 204           -e "/^# /d" \
 205           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 206           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 207           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 208           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
 209           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
 210           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
 211           ../src/eximon.src >> eximon
 212         @echo ">>> eximon script built"; echo ""
 213
 214 # Targets for utilities; these are all Perl scripts that have to get the
 215 # location of Perl put in them. A few need other things as well.
 216
 217 exigrep: Makefile ../src/exigrep.src
 218         @rm -f exigrep
 219         @sed \
 220           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 221           -e "/^# /p" \
 222           -e "/^# /d" \
 223           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 224           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
 225           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 226           ../src/exigrep.src > exigrep-t
 227         @mv exigrep-t exigrep
 228         @chmod a+x exigrep
 229         @echo ">>> exigrep script built"
 230
 231 eximstats: Makefile ../src/eximstats.src
 232         @rm -f eximstats
 233         @sed \
 234           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 235           ../src/eximstats.src > eximstats-t
 236         @mv eximstats-t eximstats
 237         @chmod a+x eximstats
 238         @echo ">>> eximstats script built"
 239
 240 exiqgrep: Makefile ../src/exiqgrep.src
 241         @rm -f exiqgrep
 242         @sed \
 243           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 244           -e "/^# /p" \
 245           -e "/^# /d" \
 246           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 247           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 248           ../src/exiqgrep.src > exiqgrep-t
 249         @mv exiqgrep-t exiqgrep
 250         @chmod a+x exiqgrep
 251         @echo ">>> exiqgrep script built"
 252
 253 exiqsumm: Makefile ../src/exiqsumm.src
 254         @rm -f exiqsumm
 255         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 256           ../src/exiqsumm.src > exiqsumm-t
 257         @mv exiqsumm-t exiqsumm
 258         @chmod a+x exiqsumm
 259         @echo ">>> exiqsumm script built"
 260
 261 exipick: Makefile ../src/exipick.src
 262         @rm -f exipick
 263         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 264           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
 265           ../src/exipick.src > exipick-t
 266         @mv exipick-t exipick
 267         @chmod a+x exipick
 268         @echo ">>> exipick script built"
 269
 270 transport-filter.pl: Makefile ../src/transport-filter.src
 271         @rm -f transport-filter.pl
 272         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 273           ../src/transport-filter.src > transport-filter.pl-t
 274         @mv transport-filter.pl-t transport-filter.pl
 275         @chmod a+x transport-filter.pl
 276         @echo ">>> transport-filter.pl script built"
 277
 278 convert4r3: Makefile ../src/convert4r3.src
 279         @rm -f convert4r3
 280         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 281           ../src/convert4r3.src > convert4r3-t
 282         @mv convert4r3-t convert4r3
 283         @chmod a+x convert4r3
 284         @echo ">>> convert4r3 script built"
 285
 286 convert4r4: Makefile ../src/convert4r4.src
 287         @rm -f convert4r4
 288         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 289           ../src/convert4r4.src > convert4r4-t
 290         @mv convert4r4-t convert4r4
 291         @chmod a+x convert4r4
 292         @echo ">>> convert4r4 script built"
 293
 294
 295 # These are objects of optional features. They are always compiled, but
 296 # if the corresponding #defines are not set, they wind up empty and
 297 # are thrown away by the linker.
 298
 299 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 300 OBJ_WITH_OLD_DEMIME = demime.o
 301 OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o
 302
 303 # Targets for final binaries; the main one has a build number which is
 304 # updated each time. We don't bother with that for the auxiliaries.
 305
 306 OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
 307         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
 308         filtertest.o globals.o dkim.o \
 309         header.o host.o ip.o log.o lss.o match.o moan.o \
 310         os.o parse.o queue.o \
 311         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
 312         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
 313         store.o string.o tls.o tod.o transport.o tree.o verify.o \
 314         lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o \
 315         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
 316         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
 317
 318 exim:   lookups/lookups.a auths/auths.a pdkim/pdkim.a \
 319         routers/routers.a transports/transports.a \
 320         $(OBJ_EXIM) version.c
 321         @echo " "
 322         awk '{ print ($$1+1) }' cnumber.h > cnumber.temp
 323         rm -f cnumber.h; mv cnumber.temp cnumber.h
 324         @echo "$(CC) version.c"
 325         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) version.c
 326         rm -f exim
 327         @echo "$(LNCC) -o exim"
 328         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
 329           routers/routers.a transports/transports.a lookups/lookups.a \
 330           auths/auths.a pdkim/pdkim.a \
 331           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
 332           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
 333           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
 334         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 335           echo $(STRIP_COMMAND) exim; \
 336           $(STRIP_COMMAND) exim; \
 337         fi
 338         $(EXIM_CHMOD)
 339         @echo " "
 340         @echo ">>> exim binary built"
 341         @echo " "
 342
 343 # The utility for dumping the contents of an exim database
 344
 345 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
 346
 347 exim_dumpdb: $(OBJ_DUMPDB)
 348         @echo "$(LNCC) -o exim_dumpdb"
 349         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
 350           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 351         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 352           echo $(STRIP_COMMAND) exim_dumpdb; \
 353           $(STRIP_COMMAND) exim_dumpdb; \
 354         fi
 355         @echo ">>> exim_dumpdb utility built"
 356         @echo " "
 357
 358 # The utility for interrogating/fixing the contents of an exim database
 359
 360 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
 361
 362 exim_fixdb:  $(OBJ_FIXDB) auths/auths.a
 363         @echo "$(LNCC) -o exim_fixdb"
 364         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
 365           auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
 366         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 367           echo $(STRIP_COMMAND) exim_fixdb; \
 368           $(STRIP_COMMAND) exim_fixdb; \
 369         fi
 370         @echo ">>> exim_fixdb utility built"
 371         @echo " "
 372
 373 # The utility for tidying the contents of an exim database
 374
 375 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
 376
 377 exim_tidydb: $(OBJ_TIDYDB)
 378         @echo "$(LNCC) -o exim_tidydb"
 379         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
 380           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 381         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 382           echo $(STRIP_COMMAND) exim_tidydb; \
 383           $(STRIP_COMMAND) exim_tidydb; \
 384         fi
 385         @echo ">>> exim_tidydb utility built"
 386         @echo " "
 387
 388 # The utility for building dbm files
 389
 390 exim_dbmbuild: exim_dbmbuild.o
 391         @echo "$(LNCC) -o exim_dbmbuild"
 392         $(FE)$(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
 393           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 394         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 395           echo $(STRIP_COMMAND) exim_dbmbuild; \
 396           $(STRIP_COMMAND) exim_dbmbuild; \
 397         fi
 398         @echo ">>> exim_dbmbuild utility built"
 399         @echo " "
 400
 401 # The utility for locking a mailbox while messing around with it
 402
 403 exim_lock: exim_lock.c
 404         @echo "$(CC) exim_lock.c"
 405         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
 406         @echo "$(LNCC) -o exim_lock"
 407         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
 408           $(LIBS) $(EXTRALIBS)
 409         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 410           echo $(STRIP_COMMAND) exim_lock; \
 411           $(STRIP_COMMAND) exim_lock; \
 412         fi
 413         @echo ">>> exim_lock utility built"
 414         @echo " "
 415
 416 # The X-based Exim monitor program's binary part. There's a macro for cutting
 417 # out the modified TextPop module, because some antique link editors cannot
 418 # handle the fact that it is redefining things that are found later in the
 419 # Xaw library.
 420
 421 # Object modules that are the unique Eximon modules
 422
 423 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
 424         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
 425         em_text.o em_xs.o
 426
 427 # The complete modules list also includes some specially compiled versions of
 428 # code from the main Exim source tree.
 429
 430 OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
 431
 432 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
 433             ../exim_monitor/em_version.c
 434         @echo "$(CC) exim_monitor/em_version.c"
 435         $(FE)$(CC) -o em_version.o -c \
 436           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
 437         @echo "$(LNCC) -o eximon.bin"
 438         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
 439         $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
 440           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
 441         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 442           echo $(STRIP_COMMAND) eximon.bin; \
 443           $(STRIP_COMMAND) eximon.bin; \
 444         fi
 445         @echo ">>> exim monitor binary built"
 446         @echo " "
 447
 448
 449 # Compile step for most of the exim modules. HDRS is a list of headers
 450 # which cause everthing to be rebuilt. PHDRS is the same, for the use
 451 # of routers, transports, and authenticators. I can't find a way of doing this
 452 # in one. This list is overkill, but it doesn't really take much time to
 453 # rebuild Exim on a modern computer.
 454
 455 HDRS  =    config.h    dbfunctions.h    dbstuff.h    exim.h    functions.h    globals.h    local_scan.h    macros.h    mytypes.h    structs.h
 456 PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../globals.h ../local_scan.h ../macros.h ../mytypes.h ../structs.h
 457
 458 .SUFFIXES: .o .c
 459 .c.o:;  @echo "$(CC) $*.c"
 460         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
 461
 462 # This is the dummy module for use by test compiles of individual modules. It
 463 # contains functions such as log_write() that may be called from bits of Exim
 464 # in the tested code.
 465
 466 dummies.o:       dummies.c
 467
 468 # Compile instructions for perl.o for when EXIM_PERL is set
 469
 470 perl.o:          $(HDRS) perl.c
 471         @echo "$(PERL_CC) perl.c"
 472         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
 473
 474 # Compile instructions for the database utility modules
 475
 476 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
 477         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
 478         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 479                                       -DCOMPILE_UTILITY \
 480                                       -DEXIM_DUMPDB \
 481                                       -o exim_dumpdb.o exim_dbutil.c
 482
 483 exim_fixdb.o:    $(HDRS) exim_dbutil.c
 484         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
 485         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 486                                       -DCOMPILE_UTILITY \
 487                                       -DEXIM_FIXDB \
 488                                       -o exim_fixdb.o exim_dbutil.c
 489
 490 exim_tidydb.o:   $(HDRS) exim_dbutil.c
 491         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
 492         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 493                                       -DCOMPILE_UTILITY \
 494                                       -DEXIM_TIDYDB \
 495                                       -o exim_tidydb.o exim_dbutil.c
 496
 497 # Compile instructions for exim_dbmbuild
 498
 499 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
 500         @echo "$(CC) exim_dbmbuild.c"
 501         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
 502
 503 # Utilities use special versions of some modules - typically with debugging
 504 # calls cut out.
 505
 506 util-spool_in.o: $(HDRS) spool_in.c
 507         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
 508         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
 509
 510 util-store.o:    $(HDRS) store.c
 511         @echo "$(CC) -DCOMPILE_UTILITY store.c"
 512         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
 513
 514 util-string.o:   $(HDRS) string.c
 515         @echo "$(CC) -DCOMPILE_UTILITY string.c"
 516         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
 517
 518 util-os.o:       $(HDRS) os.c
 519         @echo "$(CC) -DCOMPILE_UTILITY os.c"
 520         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 521                                       -DCOMPILE_UTILITY \
 522                                       -DOS_LOAD_AVERAGE \
 523                                       -DFIND_RUNNING_INTERFACES \
 524                                       -o util-os.o os.c
 525
 526 # The local scan module depends only on its own special header, and is compiled
 527 # from a source whose location is set by configuration.
 528
 529 local_scan.o:    Makefile config.h local_scan.h ../$(LOCAL_SCAN_SOURCE)
 530         @echo "$(CC) local_scan.c"
 531         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 532
 533 # Dependencies for the "ordinary" exim modules
 534
 535 acl.o:           $(HDRS) acl.c
 536 child.o:         $(HDRS) child.c
 537 crypt16.o:       $(HDRS) crypt16.c
 538 daemon.o:        $(HDRS) daemon.c
 539 dbfn.o:          $(HDRS) dbfn.c
 540 debug.o:         $(HDRS) debug.c
 541 deliver.o:       $(HDRS) deliver.c
 542 directory.o:     $(HDRS) directory.c
 543 dns.o:           $(HDRS) dns.c
 544 enq.o:           $(HDRS) enq.c
 545 exim.o:          $(HDRS) exim.c
 546 expand.o:        $(HDRS) expand.c
 547 filter.o:        $(HDRS) filter.c
 548 filtertest.o:    $(HDRS) filtertest.c
 549 globals.o:       $(HDRS) globals.c
 550 header.o:        $(HDRS) header.c
 551 host.o:          $(HDRS) host.c
 552 ip.o:            $(HDRS) ip.c
 553 log.o:           $(HDRS) log.c
 554 lss.o:           $(HDRS) lss.c
 555 match.o:         $(HDRS) match.c
 556 moan.o:          $(HDRS) moan.c
 557 os.o:            $(HDRS) os.c
 558 parse.o:         $(HDRS) parse.c
 559 queue.o:         $(HDRS) queue.c
 560 rda.o:           $(HDRS) rda.c
 561 readconf.o:      $(HDRS) readconf.c
 562 receive.o:       $(HDRS) receive.c
 563 retry.o:         $(HDRS) retry.c
 564 rewrite.o:       $(HDRS) rewrite.c
 565 rfc2047.o:       $(HDRS) rfc2047.c
 566 route.o:         $(HDRS) route.c
 567 search.o:        $(HDRS) search.c
 568 sieve.o:         $(HDRS) sieve.c
 569 smtp_in.o:       $(HDRS) smtp_in.c
 570 smtp_out.o:      $(HDRS) smtp_out.c
 571 spool_in.o:      $(HDRS) spool_in.c
 572 spool_out.o:     $(HDRS) spool_out.c
 573 store.o:         $(HDRS) store.c
 574 string.o:        $(HDRS) string.c
 575 tls.o:           $(HDRS) tls.c tls-gnu.c tls-openssl.c
 576 tod.o:           $(HDRS) tod.c
 577 transport.o:     $(HDRS) transport.c
 578 tree.o:          $(HDRS) tree.c
 579 verify.o:        $(HDRS) verify.c
 580 dkim.o:          $(HDRS) dkim.c
 581
 582 # Dependencies for WITH_CONTENT_SCAN modules
 583
 584 malware.o:       $(HDRS) malware.c
 585 mime.o:          $(HDRS) mime.c
 586 regex.o:         $(HDRS) regex.c
 587 spam.o:          $(HDRS) spam.c
 588 spool_mbox.o:    $(HDRS) spool_mbox.c
 589
 590
 591 # Dependencies for WITH_OLD_DEMIME modules
 592
 593 demime.o:        $(HDRS) demime.c
 594
 595
 596 # Dependencies for EXPERIMENTAL_* modules
 597
 598 bmi_spam.o:      $(HDRS) bmi_spam.c
 599 spf.o:           $(HDRS) spf.h spf.c
 600 srs.o:           $(HDRS) srs.h srs.c
 601 dcc.o:           $(HDRS) dcc.h dcc.c
 602
 603 # The module containing tables of available lookups, routers, auths, and
 604 # transports must be rebuilt if any of them are. However, because the makefiles
 605 # for the drivers are always run, we don't actually put the dependencies here,
 606 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
 607 # drtables.o even though the .a files haven't in fact been updated. Instead
 608 # it is arranged that the lower-level makefiles remove drtables.o when they
 609 # rebuild the .a files.
 610
 611 drtables.o:      $(HDRS) drtables.c
 612
 613
 614 # The exim monitor's private modules - the sources live in a private
 615 # subdirectory. The final binary combines the private modules with some
 616 # modules from the main exim binary.
 617
 618 em_StripChart.o: ../exim_monitor/em_StripChart.c
 619 em_TextPop.o:    ../exim_monitor/em_TextPop.c
 620 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
 621 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
 622 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
 623 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
 624 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
 625 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
 626 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
 627 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
 628 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
 629 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
 630 $(MONBIN): $(HDRS)
 631                  @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
 632                  $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
 633                    ../exim_monitor/`echo $@ | sed 's/o$$/c/'`
 634
 635
 636 # Targets for the various libraries that Exim uses.
 637
 638 # The lookups library.
 639
 640 buildlookups lookups/lookups.a: config.h
 641          @cd lookups; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 642            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" \
 643            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 644            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"; \
 645          echo " "
 646
 647 # The routers library.
 648
 649 buildrouters routers/routers.a: config.h
 650          @cd routers; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 651            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 652            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
 653          echo " "
 654
 655 # The transports library.
 656
 657 buildtransports transports/transports.a: config.h
 658          @cd transports; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 659            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 660            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
 661          echo " "
 662
 663 # The library of authorization modules
 664
 665 buildauths auths/auths.a: config.h
 666          @cd auths; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 667            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 668            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
 669          echo " "
 670
 671 # The PDKIM library
 672
 673 buildpdkim pdkim/pdkim.a: config.h
 674          @cd pdkim; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 675            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 676            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
 677          echo " "
 678
 679 # The "clean", "install", and "makefile" targets just pass themselves back to
 680 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
 681 # for them in the build directory.
 682
 683 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
 684
 685 # Targets for building stand-alone testing programs for basic testing of
 686 # some of the building blocks. These are not integrated with the makefile-
 687 # building targets. If you change something that is going to cause the
 688 # makefile to be rebuilt, you must run "make makefile" before running one
 689 # of these.
 690
 691 # The testing programs use different versions of some modules - usually
 692 # with bits cut out that are not relevant to the test in hand. For those
 693 # that are used by several tests, we use a different name.
 694
 695 sa-globals.o:    $(HDRS) globals.c
 696         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
 697
 698 sa-os.o:         $(HDRS) os.c
 699         $(CC) -c $(CFLAGS) $(INCLUDE) \
 700                                       -DFIND_RUNNING_INTERFACES \
 701                                       -o sa-os.o os.c
 702
 703 # These are the test targets themselves
 704
 705 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
 706                string.o tod.o version.o
 707         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
 708         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
 709           dummies.o sa-globals.o sa-os.o store.o string.o \
 710           tod.o version.o $(LIBS) $(DBMLIB)
 711         rm -f dbfn.o
 712
 713 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
 714                store.o string.o tod.o tree.o
 715         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
 716         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
 717         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
 718         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
 719         $(LNCC) -o test_host $(LFLAGS) \
 720           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
 721           tod.o tree.o $(LIBS) $(LIBRESOLV)
 722         rm -f child.o dummies.o host.o dns.o
 723
 724 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o
 725         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
 726         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
 727           sa-globals.o store.o string.o tod.o $(LIBS)
 728         rm -f os.o
 729
 730 test_parse:  config.h parse.c dummies.o sa-globals.o \
 731              store.o string.o tod.o version.o
 732         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
 733         $(LNCC) -o test_parse $(LFLAGS) parse.o \
 734           dummies.o sa-globals.o store.o string.o tod.o version.o
 735         rm -f parse.o
 736
 737 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o
 738         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
 739         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
 740           dummies.o sa-globals.o store.o tod.o $(LIBS)
 741         rm -f string.o
 742
 743 # End