src/OS/Makefile-Base

   1 # This file is the basis of the main makefile for Exim and friends. The
   2 # makefile at the top level arranges to build the main makefile by calling
   3 # scripts/Configure-Makefile from within the build directory. This
   4 # concatenates the configuration settings from Local/Makefile and other,
   5 # optional, Local/* files at the front of this file, to create Makefile in the
   6 # build directory.
   7 #
   8 # Copyright (c) The Exim Maintainers 1995 - 2018
   9 # Copyright (c) The Exim Maintainers 2020
  10
  11 SHELL      = $(MAKE_SHELL)
  12 SCRIPTS    = ../scripts
  13 O          = ../OS
  14 EDITME     = ../Local/Makefile
  15 EXIMON_EDITME = ../Local/eximon.conf
  16
  17 # The compiler used for linking is normally the same as the compiler used for
  18 # compiling. However, by giving it a different name, we can override it from
  19 # the command line, and this is helpful for certain types of testing.
  20
  21 LNCC = $(CC)
  22
  23 # The compile commands can be very long. To make the output look better,
  24 # they are not normally echoed in full. To get full echoing, the caller
  25 # must set FULLECHO='' on the command line and call make with -e. We default
  26 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
  27
  28 FULLECHO = @
  29 FE       = $(FULLECHO)
  30
  31 # The default target double-checks the existence of $(EDITME) and then arranges
  32 # to touch it if it exists and any of the optional configuration files, which
  33 # depend on the os or the architecture, have been altered. The same sub-target
  34 # does the same thing for the eximon configuration file if it exists. Then
  35 # there is a check that the Makefile (the one built from this file) is
  36 # up-to-date. Then the os-specific source files and the C configuration file
  37 # are set up, and finally it goes to the main Exim target.
  38
  39 all:       utils exim
  40 config:    $(EDITME) checklocalmake Makefile os.c config.h version.h version.sh macro.c
  41
  42 checklocalmake:
  43         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
  44           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
  45           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
  46         then \
  47           touch $(EDITME); \
  48         fi
  49         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
  50           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
  51           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
  52         then \
  53           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
  54         fi
  55
  56 $(EDITME):
  57         @echo " "
  58         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
  59         @echo "*** appropriate changes for your site."
  60         @echo " "
  61         @false
  62
  63 $(EXIMON_EDITME):
  64         @echo " "
  65         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
  66         @echo "*** appropriate changes for your site."
  67         @echo " "
  68         @test ! -d ../Local && mkdir ../Local
  69         @false
  70
  71 # Check that the local Makefile is up-to-date
  72
  73 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
  74           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
  75         @echo " "
  76         @echo "*** Makefile needs rebuilding"
  77         @echo "*** Please run \"make makefile\" at top level"
  78         @echo " "
  79         @false
  80
  81 # Build (link) the os.h file
  82
  83 os.h:   $(SCRIPTS)/Configure-os.h \
  84         $(O)/os.h-Darwin        \
  85         $(O)/os.h-FreeBSD       \
  86         $(O)/os.h-GNU           \
  87         $(O)/os.h-Linux         \
  88         $(O)/os.h-OpenBSD       \
  89         $(O)/os.h-SunOS5
  90         $(SHELL) $(SCRIPTS)/Configure-os.h
  91
  92 # Build the os.c file
  93
  94 os.c:   ../src/os.c \
  95         $(SCRIPTS)/Configure-os.c \
  96         $(O)/os.c-FreeBSD       \
  97         $(O)/os.c-GNU           \
  98         $(O)/os.c-Linux         \
  99         $(O)/os.c-SunOS5
 100         $(SHELL) $(SCRIPTS)/Configure-os.c
 101
 102 # Build the config.h file.
 103
 104 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 105         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
 106
 107 # Build the builtin-macros data struct
 108
 109 MACRO_HSRC = macro_predef.h os.h globals.h config.h macros.h \
 110         routers/accept.h routers/dnslookup.h routers/ipliteral.h \
 111         routers/iplookup.h routers/manualroute.h routers/queryprogram.h \
 112         routers/redirect.h
 113
 114 OBJ_MACRO = macro_predef.o \
 115         macro-globals.o macro-readconf.o macro-route.o macro-transport.o macro-drtables.o \
 116         macro-tls.o \
 117         macro-appendfile.o macro-autoreply.o macro-lmtp.o macro-pipe.o macro-queuefile.o \
 118         macro-smtp.o macro-accept.o macro-dnslookup.o macro-ipliteral.o macro-iplookup.o \
 119         macro-manualroute.o macro-queryprogram.o macro-redirect.o \
 120         macro-auth-spa.o macro-cram_md5.o macro-cyrus_sasl.o macro-dovecot.o macro-gsasl_exim.o \
 121         macro-heimdal_gssapi.o macro-plaintext.o macro-spa.o macro-authtls.o macro-external.o \
 122         macro-dkim.o macro-malware.o macro-signing.o
 123
 124 $(OBJ_MACRO):   $(MACRO_HSRC)
 125
 126 macro_predef.o :        macro_predef.c
 127         @echo "$(CC) -DMACRO_PREDEF macro_predef.c"
 128         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ macro_predef.c
 129 macro-globals.o :       globals.c
 130         @echo "$(CC) -DMACRO_PREDEF globals.c"
 131         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ globals.c
 132 macro-readconf.o :      readconf.c
 133         @echo "$(CC) -DMACRO_PREDEF readconf.c"
 134         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ readconf.c
 135 macro-route.o :         route.c
 136         @echo "$(CC) -DMACRO_PREDEF route.c"
 137         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ route.c
 138 macro-transport.o:      transport.c
 139         @echo "$(CC) -DMACRO_PREDEF transport.c"
 140         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transport.c
 141 macro-drtables.o :      drtables.c
 142         @echo "$(CC) -DMACRO_PREDEF drtables.c"
 143         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ drtables.c
 144 macro-tls.o:    tls.c tls-gnu.c tls-openssl.c
 145         @echo "$(CC) -DMACRO_PREDEF tls.c"
 146         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ tls.c
 147 macro-appendfile.o :    transports/appendfile.c
 148         @echo "$(CC) -DMACRO_PREDEF transports/appendfile.c"
 149         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/appendfile.c
 150 macro-autoreply.o :     transports/autoreply.c
 151         @echo "$(CC) -DMACRO_PREDEF transports/autoreply.c"
 152         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/autoreply.c
 153 macro-lmtp.o:           transports/lmtp.c
 154         @echo "$(CC) -DMACRO_PREDEF transports/lmtp.c"
 155         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/lmtp.c
 156 macro-pipe.o :          transports/pipe.c
 157         @echo "$(CC) -DMACRO_PREDEF transports/pipe.c"
 158         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/pipe.c
 159 macro-queuefile.o :     transports/queuefile.c
 160         @echo "$(CC) -DMACRO_PREDEF transports/queuefile.c"
 161         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/queuefile.c
 162 macro-smtp.o :          transports/smtp.c
 163         @echo "$(CC) -DMACRO_PREDEF transports/smtp.c"
 164         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/smtp.c
 165 macro-accept.o :        routers/accept.c
 166         @echo "$(CC) -DMACRO_PREDEF routers/accept.c"
 167         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/accept.c
 168 macro-dnslookup.o :     routers/dnslookup.c
 169         @echo "$(CC) -DMACRO_PREDEF routers/dnslookup.c"
 170         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/dnslookup.c
 171 macro-ipliteral.o :     routers/ipliteral.c
 172         @echo "$(CC) -DMACRO_PREDEF routers/ipliteral.c"
 173         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/ipliteral.c
 174 macro-iplookup.o :      routers/iplookup.c
 175         @echo "$(CC) -DMACRO_PREDEF routers/iplookup.c"
 176         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/iplookup.c
 177 macro-manualroute.o :   routers/manualroute.c
 178         @echo "$(CC) -DMACRO_PREDEF routers/manualroute.c"
 179         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/manualroute.c
 180 macro-queryprogram.o :  routers/queryprogram.c
 181         @echo "$(CC) -DMACRO_PREDEF routers/queryprogram.c"
 182         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/queryprogram.c
 183 macro-redirect.o :      routers/redirect.c
 184         @echo "$(CC) -DMACRO_PREDEF routers/redirect.c"
 185         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/redirect.c
 186 macro-auth-spa.o :      auths/auth-spa.c
 187         @echo "$(CC) -DMACRO_PREDEF auths/auth-spa.c"
 188         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/auth-spa.c
 189 macro-cram_md5.o :      auths/cram_md5.c
 190         @echo "$(CC) -DMACRO_PREDEF auths/cram_md5.c"
 191         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cram_md5.c
 192 macro-cyrus_sasl.o :    auths/cyrus_sasl.c
 193         @echo "$(CC) -DMACRO_PREDEF auths/cyrus_sasl.c"
 194         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cyrus_sasl.c
 195 macro-dovecot.o:        auths/dovecot.c
 196         @echo "$(CC) -DMACRO_PREDEF auths/dovecot.c"
 197         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/dovecot.c
 198 macro-external.o:       auths/external.c
 199         @echo "$(CC) -DMACRO_PREDEF auths/external.c"
 200         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/external.c
 201 macro-gsasl_exim.o :    auths/gsasl_exim.c
 202         @echo "$(CC) -DMACRO_PREDEF auths/gsasl_exim.c"
 203         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/gsasl_exim.c
 204 macro-heimdal_gssapi.o: auths/heimdal_gssapi.c
 205         @echo "$(CC) -DMACRO_PREDEF auths/heimdal_gssapi.c"
 206         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/heimdal_gssapi.c
 207 macro-plaintext.o :     auths/plaintext.c
 208         @echo "$(CC) -DMACRO_PREDEF auths/plaintext.c"
 209         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/plaintext.c
 210 macro-spa.o :           auths/spa.c
 211         @echo "$(CC) -DMACRO_PREDEF auths/spa.c"
 212         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/spa.c
 213 macro-authtls.o:        auths/tls.c
 214         @echo "$(CC) -DMACRO_PREDEF auths/tls.c"
 215         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/tls.c
 216 macro-dkim.o:           dkim.c
 217         @echo "$(CC) -DMACRO_PREDEF dkim.c"
 218         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ dkim.c
 219 macro-malware.o:        malware.c
 220         @echo "$(CC) -DMACRO_PREDEF malware.c"
 221         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ malware.c
 222 macro-signing.o:        pdkim/signing.c
 223         @echo "$(CC) -DMACRO_PREDEF pdkim/signing.c"
 224         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ pdkim/signing.c
 225
 226 macro_predef: $(OBJ_MACRO)
 227         @echo "$(LNCC) -o $@"
 228         $(FE)$(LNCC) -o $@ $(LFLAGS) $(OBJ_MACRO)
 229
 230 macro.c: macro_predef
 231         ./macro_predef > macro.c
 232
 233 # This target is recognized specially by GNU make. It records those targets
 234 # that do not correspond to files that are being built and which should
 235 # therefore always be run, even if the files exist. This shouldn't in fact be a
 236 # problem, but it does no harm. Other make programs will just ignore this.
 237
 238 .PHONY: all config utils \
 239         buildauths buildlookups buildpdkim buildrouters \
 240         buildtransports checklocalmake clean
 241
 242
 243 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
 244         exigrep eximstats exipick exiqgrep exiqsumm \
 245         transport-filter.pl convert4r3 convert4r4 \
 246         exim_checkaccess \
 247         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
 248
 249
 250 # Targets for special-purpose configuration header builders
 251 buildconfig: buildconfig.c
 252         @echo "$(CC) buildconfig.c"
 253         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
 254
 255
 256 # Target for the exicyclog utility script
 257 exicyclog: config ../src/exicyclog.src
 258         @rm -f exicyclog
 259         @. ./version.sh && sed \
 260           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 261           -e "/^# /p" \
 262           -e "/^# /d" \
 263           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 264           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
 265           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 266           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 267           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
 268           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
 269           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 270           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
 271           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
 272           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
 273           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
 274           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 275           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
 276           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 277           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 278           ../src/exicyclog.src > exicyclog-t
 279         @mv exicyclog-t exicyclog
 280         @chmod a+x exicyclog
 281         @echo ">>> exicyclog script built"
 282
 283 # Target for the exinext utility script
 284 exinext: config ../src/exinext.src
 285         @rm -f exinext
 286         @. ./version.sh && sed \
 287           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 288           -e "/^# /p" \
 289           -e "/^# /d" \
 290           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 291           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 292           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 293           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 294           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 295           ../src/exinext.src > exinext-t
 296         @mv exinext-t exinext
 297         @chmod a+x exinext
 298         @echo ">>> exinext script built"
 299
 300 # Target for the exiwhat utility script
 301 exiwhat: config ../src/exiwhat.src
 302         @rm -f exiwhat
 303         @. ./version.sh && sed \
 304           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 305           -e "/^# /p" \
 306           -e "/^# /d" \
 307           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 308           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 309           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 310           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
 311           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
 312           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
 313           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
 314           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
 315           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
 316           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 317           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 318           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 319           ../src/exiwhat.src > exiwhat-t
 320         @mv exiwhat-t exiwhat
 321         @chmod a+x exiwhat
 322         @echo ">>> exiwhat script built"
 323
 324 # Target for the exim_checkaccess utility script
 325 exim_checkaccess: config ../src/exim_checkaccess.src
 326         @rm -f exim_checkaccess
 327         @. ./version.sh && sed \
 328           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 329           -e "/^# /p" \
 330           -e "/^# /d" \
 331           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 332           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 333           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 334           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 335           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 336           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 337           ../src/exim_checkaccess.src > exim_checkaccess-t
 338         @mv exim_checkaccess-t exim_checkaccess
 339         @chmod a+x exim_checkaccess
 340         @echo ">>> exim_checkaccess script built"; echo ""
 341
 342 # Target for the Exim monitor start-up script
 343 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
 344           ../Local/eximon.conf
 345         @rm -f eximon
 346         $(SHELL) $(SCRIPTS)/Configure-eximon
 347         @. ./version.sh && sed \
 348           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 349           -e "/^# /p" \
 350           -e "/^# /d" \
 351           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 352           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 353           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 354           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
 355           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
 356           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
 357           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 358           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 359           ../src/eximon.src >> eximon
 360         @echo ">>> eximon script built"; echo ""
 361
 362 # Targets for utilities; these are all Perl scripts that have to get the
 363 # location of Perl put in them. A few need other things as well.
 364
 365 exigrep: config ../src/exigrep.src
 366         @rm -f exigrep
 367         @. ./version.sh && sed \
 368           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 369           -e "/^# /p" \
 370           -e "/^# /d" \
 371           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 372           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
 373           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 374           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 375           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 376           ../src/exigrep.src > exigrep-t
 377         @mv exigrep-t exigrep
 378         @chmod a+x exigrep
 379         @echo ">>> exigrep script built"
 380
 381 eximstats: config ../src/eximstats.src
 382         @rm -f eximstats
 383         @. ./version.sh && sed \
 384           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 385           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 386           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 387           ../src/eximstats.src > eximstats-t
 388         @mv eximstats-t eximstats
 389         @chmod a+x eximstats
 390         @echo ">>> eximstats script built"
 391
 392 exiqgrep: config ../src/exiqgrep.src
 393         @rm -f exiqgrep
 394         @. ./version.sh && sed \
 395           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 396           -e "/^# /p" \
 397           -e "/^# /d" \
 398           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 399           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 400           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 401           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 402           ../src/exiqgrep.src > exiqgrep-t
 403         @mv exiqgrep-t exiqgrep
 404         @chmod a+x exiqgrep
 405         @echo ">>> exiqgrep script built"
 406
 407 exiqsumm: config ../src/exiqsumm.src
 408         @rm -f exiqsumm
 409         @. ./version.sh && sed \
 410           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 411           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 412           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 413           ../src/exiqsumm.src > exiqsumm-t
 414         @mv exiqsumm-t exiqsumm
 415         @chmod a+x exiqsumm
 416         @echo ">>> exiqsumm script built"
 417
 418 exipick: config ../src/exipick.src
 419         @rm -f exipick
 420         @. ./version.sh && sed \
 421           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 422           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
 423           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 424           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 425           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 426           ../src/exipick.src > exipick-t
 427         @mv exipick-t exipick
 428         @chmod a+x exipick
 429         @echo ">>> exipick script built"
 430
 431 transport-filter.pl: config ../src/transport-filter.src
 432         @rm -f transport-filter.pl
 433         @. ./version.sh && sed \
 434           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 435           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 436           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 437           ../src/transport-filter.src > transport-filter.pl-t
 438         @mv transport-filter.pl-t transport-filter.pl
 439         @chmod a+x transport-filter.pl
 440         @echo ">>> transport-filter.pl script built"
 441
 442 convert4r3: config ../src/convert4r3.src
 443         @rm -f convert4r3
 444         @. ./version.sh && sed \
 445           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 446           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 447           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 448           ../src/convert4r3.src > convert4r3-t
 449         @mv convert4r3-t convert4r3
 450         @chmod a+x convert4r3
 451         @echo ">>> convert4r3 script built"
 452
 453 convert4r4: config ../src/convert4r4.src
 454         @rm -f convert4r4
 455         @. ./version.sh && sed \
 456           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 457           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 458           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 459           ../src/convert4r4.src > convert4r4-t
 460         @mv convert4r4-t convert4r4
 461         @chmod a+x convert4r4
 462         @echo ">>> convert4r4 script built"
 463
 464
 465 # These are objects of optional features. They are always compiled, but
 466 # if the corresponding #defines are not set, they wind up empty and
 467 # are thrown away by the linker.
 468
 469 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 470 OBJ_EXPERIMENTAL =      arc.o \
 471                         bmi_spam.o \
 472                         dane.o \
 473                         dcc.o \
 474                         dmarc.o \
 475                         imap_utf7.o \
 476                         spf.o \
 477                         srs.o \
 478                         utf8.o
 479
 480 # Targets for final binaries; the main one has a build number which is
 481 # updated each time. We don't bother with that for the auxiliaries.
 482
 483 OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
 484
 485 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
 486         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
 487         filtertest.o globals.o dkim.o dkim_transport.o hash.o \
 488         header.o host.o ip.o log.o lss.o match.o md5.o moan.o \
 489         os.o parse.o queue.o \
 490         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
 491         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
 492         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
 493         environment.o macro.o \
 494         $(OBJ_LOOKUPS) \
 495         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
 496         $(OBJ_EXPERIMENTAL)
 497
 498 exim:   buildlookups buildauths pdkim/pdkim.a \
 499         buildrouters buildtransports \
 500         $(OBJ_EXIM) version.o
 501         @echo "$(LNCC) -o exim"
 502         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
 503           routers/routers.a transports/transports.a lookups/lookups.a \
 504           auths/auths.a pdkim/pdkim.a \
 505           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
 506           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
 507           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
 508         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 509           echo $(STRIP_COMMAND) exim; \
 510           $(STRIP_COMMAND) exim; \
 511         fi
 512         $(EXIM_CHMOD)
 513         @echo " "
 514         @echo ">>> exim binary built"
 515         @echo " "
 516
 517 # The utility for dumping the contents of an exim database
 518
 519 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
 520
 521 exim_dumpdb: $(OBJ_DUMPDB)
 522         @echo "$(LNCC) -o exim_dumpdb"
 523         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
 524           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 525         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 526           echo $(STRIP_COMMAND) exim_dumpdb; \
 527           $(STRIP_COMMAND) exim_dumpdb; \
 528         fi
 529         @echo ">>> exim_dumpdb utility built"
 530         @echo " "
 531
 532 # The utility for interrogating/fixing the contents of an exim database
 533
 534 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o util-md5.o
 535
 536 exim_fixdb:  $(OBJ_FIXDB)
 537         @echo "$(LNCC) -o exim_fixdb"
 538         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
 539           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 540         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 541           echo $(STRIP_COMMAND) exim_fixdb; \
 542           $(STRIP_COMMAND) exim_fixdb; \
 543         fi
 544         @echo ">>> exim_fixdb utility built"
 545         @echo " "
 546
 547 # The utility for tidying the contents of an exim database
 548
 549 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
 550
 551 exim_tidydb: $(OBJ_TIDYDB)
 552         @echo "$(LNCC) -o exim_tidydb"
 553         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
 554           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 555         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 556           echo $(STRIP_COMMAND) exim_tidydb; \
 557           $(STRIP_COMMAND) exim_tidydb; \
 558         fi
 559         @echo ">>> exim_tidydb utility built"
 560         @echo " "
 561
 562 # The utility for building dbm files
 563
 564 exim_dbmbuild: exim_dbmbuild.o
 565         @echo "$(LNCC) -o exim_dbmbuild"
 566         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
 567           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 568         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 569           echo $(STRIP_COMMAND) exim_dbmbuild; \
 570           $(STRIP_COMMAND) exim_dbmbuild; \
 571         fi
 572         @echo ">>> exim_dbmbuild utility built"
 573         @echo " "
 574
 575 # The utility for locking a mailbox while messing around with it
 576
 577 exim_lock: exim_lock.c os.h
 578         @echo "$(CC) exim_lock.c"
 579         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
 580         @echo "$(LNCC) -o exim_lock"
 581         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
 582           $(LIBS) $(EXTRALIBS)
 583         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 584           echo $(STRIP_COMMAND) exim_lock; \
 585           $(STRIP_COMMAND) exim_lock; \
 586         fi
 587         @echo ">>> exim_lock utility built"
 588         @echo " "
 589
 590 # The X-based Exim monitor program's binary part. There's a macro for cutting
 591 # out the modified TextPop module, because some antique link editors cannot
 592 # handle the fact that it is redefining things that are found later in the
 593 # Xaw library.
 594
 595 # Object modules that are the unique Eximon modules
 596
 597 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
 598         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
 599         em_text.o em_xs.o
 600
 601 # The complete modules list also includes some specially compiled versions of
 602 # code from the main Exim source tree.
 603
 604 OBJ_MONBIN = util-spool_in.o \
 605              util-store.o \
 606              util-string.o \
 607              util-queue.o \
 608              util-tod.o \
 609              util-tree.o \
 610              $(MONBIN)
 611
 612 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) ../exim_monitor/em_version.c \
 613                 mytypes.h store.h macros.h
 614         @echo "$(CC) exim_monitor/em_version.c"
 615         $(FE)$(CC) -o em_version.o -c \
 616           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
 617         @echo "$(LNCC) -o eximon.bin"
 618         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
 619           $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
 620           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
 621         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 622           echo $(STRIP_COMMAND) eximon.bin; \
 623           $(STRIP_COMMAND) eximon.bin; \
 624         fi
 625         @echo ">>> exim monitor binary built"
 626         @echo " "
 627
 628
 629 # Compile step for most of the exim modules. HDRS is a list of headers
 630 # which cause everything to be rebuilt. PHDRS is the same, for the use
 631 # of routers, transports, and authenticators. I can't find a way of doing this
 632 # in one. This list is overkill, but it doesn't really take much time to
 633 # rebuild Exim on a modern computer.
 634
 635 HDRS  = blob.h \
 636         config.h \
 637         dbfunctions.h \
 638         dbstuff.h \
 639         exim.h \
 640         functions.h \
 641         globals.h \
 642         hash.h \
 643         local_scan.h \
 644         macros.h \
 645         mytypes.h \
 646         sha_ver.h \
 647         structs.h \
 648         os.h
 649 PHDRS = ../config.h \
 650         ../dbfunctions.h \
 651         ../dbstuff.h \
 652         ../exim.h \
 653         ../functions.h \
 654         ../globals.h \
 655         ../local_scan.h \
 656         ../macros.h \
 657         ../mytypes.h \
 658         ../structs.h \
 659         ../os.h
 660
 661 .SUFFIXES: .o .c
 662 .c.o:;  @echo "$(CC) $*.c"
 663         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
 664
 665 # Update Exim's version information and build the version object.
 666
 667 version.h version.sh::
 668         @../scripts/reversion
 669
 670 cnumber.h: version.h
 671
 672 version.o: $(HDRS) cnumber.h version.h version.c
 673
 674 # This is the dummy module for use by test compiles of individual modules. It
 675 # contains functions such as log_write() that may be called from bits of Exim
 676 # in the tested code.
 677
 678 dummies.o:       dummies.c
 679
 680 # Compile instructions for perl.o for when EXIM_PERL is set
 681
 682 perl.o:          $(HDRS) perl.c
 683         @echo "$(PERL_CC) perl.c"
 684         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
 685
 686 # Compile instructions for the database utility modules
 687
 688 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
 689         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
 690         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 691                                       -DCOMPILE_UTILITY \
 692                                       -DEXIM_DUMPDB \
 693                                       -o exim_dumpdb.o exim_dbutil.c
 694
 695 exim_fixdb.o:    $(HDRS) exim_dbutil.c
 696         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
 697         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 698                                       -DCOMPILE_UTILITY \
 699                                       -DEXIM_FIXDB \
 700                                       -o exim_fixdb.o exim_dbutil.c
 701
 702 exim_tidydb.o:   $(HDRS) exim_dbutil.c
 703         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
 704         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 705                                       -DCOMPILE_UTILITY \
 706                                       -DEXIM_TIDYDB \
 707                                       -o exim_tidydb.o exim_dbutil.c
 708
 709 # Compile instructions for exim_dbmbuild
 710
 711 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
 712         @echo "$(CC) exim_dbmbuild.c"
 713         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY \
 714                 -o exim_dbmbuild.o exim_dbmbuild.c
 715
 716 # Utilities use special versions of some modules - typically with debugging
 717 # calls cut out.
 718
 719 util-spool_in.o: $(HDRS) spool_in.c
 720         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
 721         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
 722
 723 util-store.o:    $(HDRS) store.c
 724         @echo "$(CC) -DCOMPILE_UTILITY store.c"
 725         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
 726
 727 util-string.o:   $(HDRS) string.c
 728         @echo "$(CC) -DCOMPILE_UTILITY string.c"
 729         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
 730
 731 util-md5.o:   $(HDRS) md5.c
 732         @echo "$(CC) -DCOMPILE_UTILITY queue.c"
 733         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-md5.o md5.c
 734
 735 util-queue.o:   $(HDRS) queue.c
 736         @echo "$(CC) -DCOMPILE_UTILITY queue.c"
 737         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-queue.o queue.c
 738
 739 util-tod.o:   $(HDRS) tod.c
 740         @echo "$(CC) -DCOMPILE_UTILITY tod.c"
 741         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tod.o tod.c
 742
 743 util-tree.o:   $(HDRS) tree.c
 744         @echo "$(CC) -DCOMPILE_UTILITY tree.c"
 745         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tree.o tree.c
 746
 747 util-os.o:       $(HDRS) os.c
 748         @echo "$(CC) -DCOMPILE_UTILITY os.c"
 749         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 750                                       -DCOMPILE_UTILITY \
 751                                       -DOS_LOAD_AVERAGE \
 752                                       -DFIND_RUNNING_INTERFACES \
 753                                       -o util-os.o os.c
 754
 755 # The local scan module depends only on its own special header, and is compiled
 756 # from a source whose location is set by configuration.
 757
 758 local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
 759         @echo "$(CC) local_scan.c"
 760         $(FE)$(CC) -DLOCAL_SCAN -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 761
 762 # Dependencies for the "ordinary" exim modules
 763
 764 acl.o:           $(HDRS) acl.c
 765 base64.o:        $(HDRS) mime.h base64.c
 766 child.o:         $(HDRS) child.c
 767 crypt16.o:       $(HDRS) crypt16.c
 768 daemon.o:        $(HDRS) daemon.c
 769 dbfn.o:          $(HDRS) dbfn.c
 770 debug.o:         $(HDRS) debug.c
 771 deliver.o:       $(HDRS) transports/smtp.h deliver.c
 772 directory.o:     $(HDRS) directory.c
 773 dns.o:           $(HDRS) dns.c
 774 enq.o:           $(HDRS) enq.c
 775 exim.o:          $(HDRS) exim.c
 776 expand.o:        $(HDRS) expand.c
 777 environment.o:   $(HDRS) environment.c
 778 filter.o:        $(HDRS) filter.c
 779 filtertest.o:    $(HDRS) filtertest.c
 780 globals.o:       $(HDRS) globals.c
 781 hash.o:          $(HDRS) hash.c
 782 header.o:        $(HDRS) header.c
 783 host.o:          $(HDRS) host.c
 784 ip.o:            $(HDRS) ip.c
 785 log.o:           $(HDRS) log.c
 786 lss.o:           $(HDRS) lss.c
 787 match.o:         $(HDRS) match.c
 788 md5.o:           $(HDRS) md5.c
 789 moan.o:          $(HDRS) moan.c
 790 os.o:            $(HDRS) $(OS_C_INCLUDES) os.c
 791 parse.o:         $(HDRS) parse.c
 792 queue.o:         $(HDRS) queue.c
 793 rda.o:           $(HDRS) rda.c
 794 readconf.o:      $(HDRS) readconf.c
 795 receive.o:       $(HDRS) receive.c
 796 retry.o:         $(HDRS) retry.c
 797 rewrite.o:       $(HDRS) rewrite.c
 798 rfc2047.o:       $(HDRS) rfc2047.c
 799 route.o:         $(HDRS) route.c
 800 search.o:        $(HDRS) search.c
 801 sieve.o:         $(HDRS) sieve.c
 802 smtp_in.o:       $(HDRS) smtp_in.c
 803 smtp_out.o:      $(HDRS) smtp_out.c
 804 spool_in.o:      $(HDRS) spool_in.c
 805 spool_out.o:     $(HDRS) spool_out.c
 806 std-crypto.o:    $(HDRS) std-crypto.c
 807 store.o:         $(HDRS) store.c
 808 string.o:        $(HDRS) string.c
 809 tls.o:           $(HDRS) tls.c \
 810                  tls-gnu.c tlscert-gnu.c \
 811                  tls-openssl.c tlscert-openssl.c \
 812                  tls-cipher-stdname.c
 813 tod.o:           $(HDRS) tod.c
 814 transport.o:     $(HDRS) transport.c
 815 tree.o:          $(HDRS) tree.c
 816 verify.o:        $(HDRS) transports/smtp.h verify.c
 817 dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
 818 dkim_transport.o: $(HDRS) dkim_transport.c
 819
 820 # Dependencies for WITH_CONTENT_SCAN modules
 821
 822 malware.o:       $(HDRS) malware.c
 823 mime.o:          $(HDRS) mime.h mime.c
 824 regex.o:         $(HDRS) regex.c
 825 spam.o:          $(HDRS) spam.c
 826 spool_mbox.o:    $(HDRS) spool_mbox.c
 827
 828
 829 # Dependencies for EXPERIMENTAL_* modules
 830
 831 arc.o:          $(HDRS) pdkim/pdkim.h arc.c
 832 bmi_spam.o:     $(HDRS) bmi_spam.c
 833 dane.o:         $(HDRS) dane.c dane-openssl.c
 834 dcc.o:          $(HDRS) dcc.h dcc.c
 835 dmarc.o:        $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
 836 imap_utf7.o:    $(HDRS) imap_utf7.c
 837 spf.o:          $(HDRS) spf.h spf.c
 838 srs.o:          $(HDRS) srs.h srs.c
 839 utf8.o:         $(HDRS) utf8.c
 840
 841 # The module containing tables of available lookups, routers, auths, and
 842 # transports must be rebuilt if any of them are. However, because the makefiles
 843 # for the drivers are always run, we don't actually put the dependencies here,
 844 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
 845 # drtables.o even though the .a files haven't in fact been updated. Instead
 846 # it is arranged that the lower-level makefiles remove drtables.o when they
 847 # rebuild the .a files.
 848
 849 drtables.o:      $(HDRS) drtables.c
 850
 851 # We depend upon object files built as part of building the lookups library
 852 # When using parallel make, we don't have the dependency to force building
 853 # in the sub-directory unless we force that dependency:
 854
 855 $(OBJ_LOOKUPS):  buildlookups
 856
 857 # The exim monitor's private modules - the sources live in a private
 858 # subdirectory. The final binary combines the private modules with some
 859 # modules from the main exim binary.
 860
 861 em_StripChart.o: ../exim_monitor/em_StripChart.c
 862 em_TextPop.o:    ../exim_monitor/em_TextPop.c
 863 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
 864 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
 865 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
 866 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
 867 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
 868 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
 869 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
 870 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
 871 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
 872 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
 873 $(MONBIN): $(HDRS)
 874                  @echo "$(CC) exim_monitor/$(@:.o=.c)"
 875                  $(FE)$(CC) -o $@ -c $(CFLAGS) -DCOMPILE_UTILITY -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
 876                    ../exim_monitor/$(@:.o=.c)
 877
 878
 879 # Targets for the various libraries that Exim uses.
 880
 881 # The lookups library.
 882
 883 buildlookups: config
 884          @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 885            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
 886            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
 887            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
 888          @echo " "
 889
 890 # The routers library.
 891
 892 buildrouters: config
 893          @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 894            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 895            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 896          @echo " "
 897
 898 # The transports library.
 899
 900 buildtransports: config
 901          @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 902            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 903            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 904          @echo " "
 905
 906 # The library of authorization modules
 907
 908 buildauths: config
 909          @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 910            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 911            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 912          @echo " "
 913
 914 # The PDKIM library
 915
 916 buildpdkim: pdkim/pdkim.a
 917 pdkim/pdkim.a: config
 918          @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 919            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 920            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 921          @echo " "
 922
 923 # The "clean", "install", and "makefile" targets just pass themselves back to
 924 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
 925 # for them in the build directory.
 926
 927 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
 928
 929 # Targets for building stand-alone testing programs for basic testing of
 930 # some of the building blocks. These are not integrated with the makefile-
 931 # building targets. If you change something that is going to cause the
 932 # makefile to be rebuilt, you must run "make makefile" before running one
 933 # of these.
 934
 935 # The testing programs use different versions of some modules - usually
 936 # with bits cut out that are not relevant to the test in hand. For those
 937 # that are used by several tests, we use a different name.
 938
 939 sa-globals.o:    $(HDRS) globals.c
 940         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
 941
 942 sa-os.o:         $(HDRS) os.c
 943         $(CC) -c $(CFLAGS) $(INCLUDE) \
 944                                       -DFIND_RUNNING_INTERFACES \
 945                                       -o sa-os.o os.c
 946
 947 # These are the test targets themselves
 948
 949 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
 950                string.o tod.o version.o utf8.o
 951         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
 952         $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY store.c
 953         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
 954           dummies.o sa-globals.o sa-os.o store.o string.o \
 955           tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
 956         rm -f dbfn.o store.o
 957
 958 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
 959                store.o string.o tod.o tree.o
 960         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
 961         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
 962         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
 963         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
 964         $(LNCC) -o test_host $(LFLAGS) \
 965           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
 966           tod.o tree.o $(LIBS) $(LIBRESOLV)
 967         rm -f child.o dummies.o host.o dns.o
 968
 969 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
 970         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
 971         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
 972           sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 973         rm -f os.o
 974
 975 test_parse:  config.h parse.c dummies.o sa-globals.o \
 976              store.o string.o tod.o version.o utf8.o
 977         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
 978         $(LNCC) -o test_parse $(LFLAGS) parse.o \
 979           dummies.o sa-globals.o store.o string.o tod.o version.o \
 980           utf8.o $(LDFLAGS)
 981         rm -f parse.o
 982
 983 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
 984         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
 985         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
 986           dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 987         rm -f string.o
 988
 989 # End