Debug: internal consistency under testsuite
[exim.git] / src / OS / Makefile-Base
1 # This file is the basis of the main makefile for Exim and friends. The
2 # makefile at the top level arranges to build the main makefile by calling
3 # scripts/Configure-Makefile from within the build directory. This
4 # concatenates the configuration settings from Local/Makefile and other,
5 # optional, Local/* files at the front of this file, to create Makefile in the
6 # build directory.
7 #
8 # Copyright (c) The Exim Maintainers 1995 - 2018
9
10 SHELL      = $(MAKE_SHELL)
11 SCRIPTS    = ../scripts
12 O          = ../OS
13 EDITME     = ../Local/Makefile
14 EXIMON_EDITME = ../Local/eximon.conf
15
16 # The compiler used for linking is normally the same as the compiler used for
17 # compiling. However, by giving it a different name, we can override it from
18 # the command line, and this is helpful for certain types of testing.
19
20 LNCC = $(CC)
21
22 # The compile commands can be very long. To make the output look better,
23 # they are not normally echoed in full. To get full echoing, the caller
24 # must set FULLECHO='' on the command line and call make with -e. We default
25 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
26
27 FULLECHO = @
28 FE       = $(FULLECHO)
29
30 # The default target double-checks the existence of $(EDITME) and then arranges
31 # to touch it if it exists and any of the optional configuration files, which
32 # depend on the os or the architecture, have been altered. The same sub-target
33 # does the same thing for the eximon configuration file if it exists. Then
34 # there is a check that the Makefile (the one built from this file) is
35 # up-to-date. Then the os-specific source files and the C configuration file
36 # are set up, and finally it goes to the main Exim target.
37
38 all:       utils exim
39 config:    $(EDITME) checklocalmake Makefile os.c config.h version.h version.sh macro.c
40
41 checklocalmake:
42         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
43           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
44           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
45         then \
46           touch $(EDITME); \
47         fi
48         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
49           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
50           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
51         then \
52           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
53         fi
54
55 $(EDITME):
56         @echo " "
57         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
58         @echo "*** appropriate changes for your site."
59         @echo " "
60         @false
61
62 $(EXIMON_EDITME):
63         @echo " "
64         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
65         @echo "*** appropriate changes for your site."
66         @echo " "
67         @test ! -d ../Local && mkdir ../Local
68         @false
69
70 # Check that the local Makefile is up-to-date
71
72 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
73           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
74         @echo " "
75         @echo "*** Makefile needs rebuilding"
76         @echo "*** Please run \"make makefile\" at top level"
77         @echo " "
78         @false
79
80 # Build (link) the os.h file
81
82 os.h:   $(SCRIPTS)/Configure-os.h \
83         $(O)/os.h-Darwin        \
84         $(O)/os.h-FreeBSD       \
85         $(O)/os.h-GNU           \
86         $(O)/os.h-Linux         \
87         $(O)/os.h-OpenBSD       \
88         $(O)/os.h-SunOS5
89         $(SHELL) $(SCRIPTS)/Configure-os.h
90
91 # Build the os.c file
92
93 os.c:   ../src/os.c \
94         $(SCRIPTS)/Configure-os.c \
95         $(O)/os.c-FreeBSD       \
96         $(O)/os.c-GNU           \
97         $(O)/os.c-Linux         \
98         $(O)/os.c-SunOS5
99         $(SHELL) $(SCRIPTS)/Configure-os.c
100
101 # Build the config.h file.
102
103 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
104         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
105
106 # Build the builtin-macros data struct
107
108 MACRO_HSRC = macro_predef.h os.h globals.h config.h macros.h \
109         routers/accept.h routers/dnslookup.h routers/ipliteral.h \
110         routers/iplookup.h routers/manualroute.h routers/queryprogram.h \
111         routers/redirect.h
112
113 OBJ_MACRO = macro_predef.o \
114         macro-globals.o macro-readconf.o macro-route.o macro-transport.o macro-drtables.o \
115         macro-tls.o \
116         macro-appendfile.o macro-autoreply.o macro-lmtp.o macro-pipe.o macro-queuefile.o \
117         macro-smtp.o macro-accept.o macro-dnslookup.o macro-ipliteral.o macro-iplookup.o \
118         macro-manualroute.o macro-queryprogram.o macro-redirect.o \
119         macro-auth-spa.o macro-cram_md5.o macro-cyrus_sasl.o macro-dovecot.o macro-gsasl_exim.o \
120         macro-heimdal_gssapi.o macro-plaintext.o macro-spa.o macro-authtls.o macro-external.o \
121         macro-dkim.o macro-malware.o macro-signing.o
122
123 $(OBJ_MACRO):   $(MACRO_HSRC)
124
125 macro_predef.o :        macro_predef.c
126         @echo "$(CC) -DMACRO_PREDEF macro_predef.c"
127         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ macro_predef.c
128 macro-globals.o :       globals.c
129         @echo "$(CC) -DMACRO_PREDEF globals.c"
130         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ globals.c
131 macro-readconf.o :      readconf.c
132         @echo "$(CC) -DMACRO_PREDEF readconf.c"
133         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ readconf.c
134 macro-route.o :         route.c
135         @echo "$(CC) -DMACRO_PREDEF route.c"
136         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ route.c
137 macro-transport.o:      transport.c
138         @echo "$(CC) -DMACRO_PREDEF transport.c"
139         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transport.c
140 macro-drtables.o :      drtables.c
141         @echo "$(CC) -DMACRO_PREDEF drtables.c"
142         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ drtables.c
143 macro-tls.o:    tls.c tls-gnu.c tls-openssl.c
144         @echo "$(CC) -DMACRO_PREDEF tls.c"
145         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ tls.c
146 macro-appendfile.o :    transports/appendfile.c
147         @echo "$(CC) -DMACRO_PREDEF transports/appendfile.c"
148         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/appendfile.c
149 macro-autoreply.o :     transports/autoreply.c
150         @echo "$(CC) -DMACRO_PREDEF transports/autoreply.c"
151         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/autoreply.c
152 macro-lmtp.o:           transports/lmtp.c
153         @echo "$(CC) -DMACRO_PREDEF transports/lmtp.c"
154         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/lmtp.c
155 macro-pipe.o :          transports/pipe.c
156         @echo "$(CC) -DMACRO_PREDEF transports/pipe.c"
157         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/pipe.c
158 macro-queuefile.o :     transports/queuefile.c
159         @echo "$(CC) -DMACRO_PREDEF transports/queuefile.c"
160         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/queuefile.c
161 macro-smtp.o :          transports/smtp.c
162         @echo "$(CC) -DMACRO_PREDEF transports/smtp.c"
163         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/smtp.c
164 macro-accept.o :        routers/accept.c
165         @echo "$(CC) -DMACRO_PREDEF routers/accept.c"
166         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/accept.c
167 macro-dnslookup.o :     routers/dnslookup.c
168         @echo "$(CC) -DMACRO_PREDEF routers/dnslookup.c"
169         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/dnslookup.c
170 macro-ipliteral.o :     routers/ipliteral.c
171         @echo "$(CC) -DMACRO_PREDEF routers/ipliteral.c"
172         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/ipliteral.c
173 macro-iplookup.o :      routers/iplookup.c
174         @echo "$(CC) -DMACRO_PREDEF routers/iplookup.c"
175         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/iplookup.c
176 macro-manualroute.o :   routers/manualroute.c
177         @echo "$(CC) -DMACRO_PREDEF routers/manualroute.c"
178         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/manualroute.c
179 macro-queryprogram.o :  routers/queryprogram.c
180         @echo "$(CC) -DMACRO_PREDEF routers/queryprogram.c"
181         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/queryprogram.c
182 macro-redirect.o :      routers/redirect.c
183         @echo "$(CC) -DMACRO_PREDEF routers/redirect.c"
184         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/redirect.c
185 macro-auth-spa.o :      auths/auth-spa.c
186         @echo "$(CC) -DMACRO_PREDEF auths/auth-spa.c"
187         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/auth-spa.c
188 macro-cram_md5.o :      auths/cram_md5.c
189         @echo "$(CC) -DMACRO_PREDEF auths/cram_md5.c"
190         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cram_md5.c
191 macro-cyrus_sasl.o :    auths/cyrus_sasl.c
192         @echo "$(CC) -DMACRO_PREDEF auths/cyrus_sasl.c"
193         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cyrus_sasl.c
194 macro-dovecot.o:        auths/dovecot.c
195         @echo "$(CC) -DMACRO_PREDEF auths/dovecot.c"
196         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/dovecot.c
197 macro-external.o:       auths/external.c
198         @echo "$(CC) -DMACRO_PREDEF auths/external.c"
199         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/external.c
200 macro-gsasl_exim.o :    auths/gsasl_exim.c
201         @echo "$(CC) -DMACRO_PREDEF auths/gsasl_exim.c"
202         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/gsasl_exim.c
203 macro-heimdal_gssapi.o: auths/heimdal_gssapi.c
204         @echo "$(CC) -DMACRO_PREDEF auths/heimdal_gssapi.c"
205         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/heimdal_gssapi.c
206 macro-plaintext.o :     auths/plaintext.c
207         @echo "$(CC) -DMACRO_PREDEF auths/plaintext.c"
208         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/plaintext.c
209 macro-spa.o :           auths/spa.c
210         @echo "$(CC) -DMACRO_PREDEF auths/spa.c"
211         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/spa.c
212 macro-authtls.o:        auths/tls.c
213         @echo "$(CC) -DMACRO_PREDEF auths/tls.c"
214         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/tls.c
215 macro-dkim.o:           dkim.c
216         @echo "$(CC) -DMACRO_PREDEF dkim.c"
217         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ dkim.c
218 macro-malware.o:        malware.c
219         @echo "$(CC) -DMACRO_PREDEF malware.c"
220         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ malware.c
221 macro-signing.o:        pdkim/signing.c
222         @echo "$(CC) -DMACRO_PREDEF pdkim/signing.c"
223         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ pdkim/signing.c
224
225 macro_predef: $(OBJ_MACRO)
226         @echo "$(LNCC) -o $@"
227         $(FE)$(LNCC) -o $@ $(LFLAGS) $(OBJ_MACRO)
228
229 macro.c: macro_predef
230         ./macro_predef > macro.c
231
232 # This target is recognized specially by GNU make. It records those targets
233 # that do not correspond to files that are being built and which should
234 # therefore always be run, even if the files exist. This shouldn't in fact be a
235 # problem, but it does no harm. Other make programs will just ignore this.
236
237 .PHONY: all config utils \
238         buildauths buildlookups buildpdkim buildrouters \
239         buildtransports checklocalmake clean
240
241
242 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
243         exigrep eximstats exipick exiqgrep exiqsumm \
244         transport-filter.pl convert4r3 convert4r4 \
245         exim_checkaccess \
246         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
247
248
249 # Targets for special-purpose configuration header builders
250 buildconfig: buildconfig.c
251         @echo "$(CC) buildconfig.c"
252         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
253
254
255 # Target for the exicyclog utility script
256 exicyclog: config ../src/exicyclog.src
257         @rm -f exicyclog
258         @. ./version.sh && sed \
259           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
260           -e "/^# /p" \
261           -e "/^# /d" \
262           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
263           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
264           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
265           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
266           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
267           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
268           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
269           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
270           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
271           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
272           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
273           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
274           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
275           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
276           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
277           ../src/exicyclog.src > exicyclog-t
278         @mv exicyclog-t exicyclog
279         @chmod a+x exicyclog
280         @echo ">>> exicyclog script built"
281
282 # Target for the exinext utility script
283 exinext: config ../src/exinext.src
284         @rm -f exinext
285         @. ./version.sh && sed \
286           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
287           -e "/^# /p" \
288           -e "/^# /d" \
289           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
290           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
291           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
292           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
293           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
294           ../src/exinext.src > exinext-t
295         @mv exinext-t exinext
296         @chmod a+x exinext
297         @echo ">>> exinext script built"
298
299 # Target for the exiwhat utility script
300 exiwhat: config ../src/exiwhat.src
301         @rm -f exiwhat
302         @. ./version.sh && sed \
303           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
304           -e "/^# /p" \
305           -e "/^# /d" \
306           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
307           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
308           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
309           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
310           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
311           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
312           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
313           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
314           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
315           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
316           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
317           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
318           ../src/exiwhat.src > exiwhat-t
319         @mv exiwhat-t exiwhat
320         @chmod a+x exiwhat
321         @echo ">>> exiwhat script built"
322
323 # Target for the exim_checkaccess utility script
324 exim_checkaccess: config ../src/exim_checkaccess.src
325         @rm -f exim_checkaccess
326         @. ./version.sh && sed \
327           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
328           -e "/^# /p" \
329           -e "/^# /d" \
330           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
331           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
332           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
333           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
334           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
335           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
336           ../src/exim_checkaccess.src > exim_checkaccess-t
337         @mv exim_checkaccess-t exim_checkaccess
338         @chmod a+x exim_checkaccess
339         @echo ">>> exim_checkaccess script built"; echo ""
340
341 # Target for the Exim monitor start-up script
342 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
343           ../Local/eximon.conf
344         @rm -f eximon
345         $(SHELL) $(SCRIPTS)/Configure-eximon
346         @. ./version.sh && sed \
347           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
348           -e "/^# /p" \
349           -e "/^# /d" \
350           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
351           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
352           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
353           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
354           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
355           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
356           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
357           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
358           ../src/eximon.src >> eximon
359         @echo ">>> eximon script built"; echo ""
360
361 # Targets for utilities; these are all Perl scripts that have to get the
362 # location of Perl put in them. A few need other things as well.
363
364 exigrep: config ../src/exigrep.src
365         @rm -f exigrep
366         @. ./version.sh && sed \
367           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
368           -e "/^# /p" \
369           -e "/^# /d" \
370           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
371           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
372           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
373           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
374           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
375           ../src/exigrep.src > exigrep-t
376         @mv exigrep-t exigrep
377         @chmod a+x exigrep
378         @echo ">>> exigrep script built"
379
380 eximstats: config ../src/eximstats.src
381         @rm -f eximstats
382         @. ./version.sh && sed \
383           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
384           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
385           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
386           ../src/eximstats.src > eximstats-t
387         @mv eximstats-t eximstats
388         @chmod a+x eximstats
389         @echo ">>> eximstats script built"
390
391 exiqgrep: config ../src/exiqgrep.src
392         @rm -f exiqgrep
393         @. ./version.sh && sed \
394           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
395           -e "/^# /p" \
396           -e "/^# /d" \
397           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
398           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
399           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
400           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
401           ../src/exiqgrep.src > exiqgrep-t
402         @mv exiqgrep-t exiqgrep
403         @chmod a+x exiqgrep
404         @echo ">>> exiqgrep script built"
405
406 exiqsumm: config ../src/exiqsumm.src
407         @rm -f exiqsumm
408         @. ./version.sh && sed \
409           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
410           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
411           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
412           ../src/exiqsumm.src > exiqsumm-t
413         @mv exiqsumm-t exiqsumm
414         @chmod a+x exiqsumm
415         @echo ">>> exiqsumm script built"
416
417 exipick: config ../src/exipick.src
418         @rm -f exipick
419         @. ./version.sh && sed \
420           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
421           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
422           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
423           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
424           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
425           ../src/exipick.src > exipick-t
426         @mv exipick-t exipick
427         @chmod a+x exipick
428         @echo ">>> exipick script built"
429
430 transport-filter.pl: config ../src/transport-filter.src
431         @rm -f transport-filter.pl
432         @. ./version.sh && sed \
433           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
434           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
435           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
436           ../src/transport-filter.src > transport-filter.pl-t
437         @mv transport-filter.pl-t transport-filter.pl
438         @chmod a+x transport-filter.pl
439         @echo ">>> transport-filter.pl script built"
440
441 convert4r3: config ../src/convert4r3.src
442         @rm -f convert4r3
443         @. ./version.sh && sed \
444           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
445           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
446           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
447           ../src/convert4r3.src > convert4r3-t
448         @mv convert4r3-t convert4r3
449         @chmod a+x convert4r3
450         @echo ">>> convert4r3 script built"
451
452 convert4r4: config ../src/convert4r4.src
453         @rm -f convert4r4
454         @. ./version.sh && sed \
455           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
456           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
457           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
458           ../src/convert4r4.src > convert4r4-t
459         @mv convert4r4-t convert4r4
460         @chmod a+x convert4r4
461         @echo ">>> convert4r4 script built"
462
463
464 # These are objects of optional features. They are always compiled, but
465 # if the corresponding #defines are not set, they wind up empty and
466 # are thrown away by the linker.
467
468 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
469 OBJ_EXPERIMENTAL =      arc.o \
470                         bmi_spam.o \
471                         dane.o \
472                         dcc.o \
473                         dmarc.o \
474                         imap_utf7.o \
475                         spf.o \
476                         srs.o \
477                         utf8.o
478
479 # Targets for final binaries; the main one has a build number which is
480 # updated each time. We don't bother with that for the auxiliaries.
481
482 OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
483
484 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
485         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
486         filtertest.o globals.o dkim.o dkim_transport.o hash.o \
487         header.o host.o ip.o log.o lss.o match.o md5.o moan.o \
488         os.o parse.o queue.o \
489         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
490         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
491         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
492         environment.o macro.o \
493         $(OBJ_LOOKUPS) \
494         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
495         $(OBJ_EXPERIMENTAL)
496
497 exim:   buildlookups buildauths pdkim/pdkim.a \
498         buildrouters buildtransports \
499         $(OBJ_EXIM) version.o
500         @echo "$(LNCC) -o exim"
501         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
502           routers/routers.a transports/transports.a lookups/lookups.a \
503           auths/auths.a pdkim/pdkim.a \
504           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
505           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
506           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
507         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
508           echo $(STRIP_COMMAND) exim; \
509           $(STRIP_COMMAND) exim; \
510         fi
511         $(EXIM_CHMOD)
512         @echo " "
513         @echo ">>> exim binary built"
514         @echo " "
515
516 # The utility for dumping the contents of an exim database
517
518 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
519
520 exim_dumpdb: $(OBJ_DUMPDB)
521         @echo "$(LNCC) -o exim_dumpdb"
522         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
523           $(LIBS) $(EXTRALIBS) $(DBMLIB)
524         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
525           echo $(STRIP_COMMAND) exim_dumpdb; \
526           $(STRIP_COMMAND) exim_dumpdb; \
527         fi
528         @echo ">>> exim_dumpdb utility built"
529         @echo " "
530
531 # The utility for interrogating/fixing the contents of an exim database
532
533 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o util-md5.o
534
535 exim_fixdb:  $(OBJ_FIXDB)
536         @echo "$(LNCC) -o exim_fixdb"
537         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
538           $(LIBS) $(EXTRALIBS) $(DBMLIB)
539         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
540           echo $(STRIP_COMMAND) exim_fixdb; \
541           $(STRIP_COMMAND) exim_fixdb; \
542         fi
543         @echo ">>> exim_fixdb utility built"
544         @echo " "
545
546 # The utility for tidying the contents of an exim database
547
548 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
549
550 exim_tidydb: $(OBJ_TIDYDB)
551         @echo "$(LNCC) -o exim_tidydb"
552         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
553           $(LIBS) $(EXTRALIBS) $(DBMLIB)
554         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
555           echo $(STRIP_COMMAND) exim_tidydb; \
556           $(STRIP_COMMAND) exim_tidydb; \
557         fi
558         @echo ">>> exim_tidydb utility built"
559         @echo " "
560
561 # The utility for building dbm files
562
563 exim_dbmbuild: exim_dbmbuild.o
564         @echo "$(LNCC) -o exim_dbmbuild"
565         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
566           $(LIBS) $(EXTRALIBS) $(DBMLIB)
567         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
568           echo $(STRIP_COMMAND) exim_dbmbuild; \
569           $(STRIP_COMMAND) exim_dbmbuild; \
570         fi
571         @echo ">>> exim_dbmbuild utility built"
572         @echo " "
573
574 # The utility for locking a mailbox while messing around with it
575
576 exim_lock: exim_lock.c os.h
577         @echo "$(CC) exim_lock.c"
578         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
579         @echo "$(LNCC) -o exim_lock"
580         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
581           $(LIBS) $(EXTRALIBS)
582         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
583           echo $(STRIP_COMMAND) exim_lock; \
584           $(STRIP_COMMAND) exim_lock; \
585         fi
586         @echo ">>> exim_lock utility built"
587         @echo " "
588
589 # The X-based Exim monitor program's binary part. There's a macro for cutting
590 # out the modified TextPop module, because some antique link editors cannot
591 # handle the fact that it is redefining things that are found later in the
592 # Xaw library.
593
594 # Object modules that are the unique Eximon modules
595
596 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
597         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
598         em_text.o em_xs.o
599
600 # The complete modules list also includes some specially compiled versions of
601 # code from the main Exim source tree.
602
603 OBJ_MONBIN = util-spool_in.o \
604              util-store.o \
605              util-string.o \
606              util-queue.o \
607              util-tod.o \
608              util-tree.o \
609              $(MONBIN)
610
611 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) ../exim_monitor/em_version.c \
612                 mytypes.h store.h macros.h
613         @echo "$(CC) exim_monitor/em_version.c"
614         $(FE)$(CC) -o em_version.o -c \
615           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
616         @echo "$(LNCC) -o eximon.bin"
617         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
618           $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
619           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
620         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
621           echo $(STRIP_COMMAND) eximon.bin; \
622           $(STRIP_COMMAND) eximon.bin; \
623         fi
624         @echo ">>> exim monitor binary built"
625         @echo " "
626
627
628 # Compile step for most of the exim modules. HDRS is a list of headers
629 # which cause everything to be rebuilt. PHDRS is the same, for the use
630 # of routers, transports, and authenticators. I can't find a way of doing this
631 # in one. This list is overkill, but it doesn't really take much time to
632 # rebuild Exim on a modern computer.
633
634 HDRS  = blob.h \
635         config.h \
636         dbfunctions.h \
637         dbstuff.h \
638         exim.h \
639         functions.h \
640         globals.h \
641         hash.h \
642         local_scan.h \
643         macros.h \
644         mytypes.h \
645         sha_ver.h \
646         structs.h \
647         os.h
648 PHDRS = ../config.h \
649         ../dbfunctions.h \
650         ../dbstuff.h \
651         ../exim.h \
652         ../functions.h \
653         ../globals.h \
654         ../local_scan.h \
655         ../macros.h \
656         ../mytypes.h \
657         ../structs.h \
658         ../os.h
659
660 .SUFFIXES: .o .c
661 .c.o:;  @echo "$(CC) $*.c"
662         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
663
664 # Update Exim's version information and build the version object.
665
666 version.h version.sh::
667         @../scripts/reversion
668
669 cnumber.h: version.h
670
671 version.o: $(HDRS) cnumber.h version.h version.c
672
673 # This is the dummy module for use by test compiles of individual modules. It
674 # contains functions such as log_write() that may be called from bits of Exim
675 # in the tested code.
676
677 dummies.o:       dummies.c
678
679 # Compile instructions for perl.o for when EXIM_PERL is set
680
681 perl.o:          $(HDRS) perl.c
682         @echo "$(PERL_CC) perl.c"
683         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
684
685 # Compile instructions for the database utility modules
686
687 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
688         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
689         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
690                                       -DCOMPILE_UTILITY \
691                                       -DEXIM_DUMPDB \
692                                       -o exim_dumpdb.o exim_dbutil.c
693
694 exim_fixdb.o:    $(HDRS) exim_dbutil.c
695         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
696         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
697                                       -DCOMPILE_UTILITY \
698                                       -DEXIM_FIXDB \
699                                       -o exim_fixdb.o exim_dbutil.c
700
701 exim_tidydb.o:   $(HDRS) exim_dbutil.c
702         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
703         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
704                                       -DCOMPILE_UTILITY \
705                                       -DEXIM_TIDYDB \
706                                       -o exim_tidydb.o exim_dbutil.c
707
708 # Compile instructions for exim_dbmbuild
709
710 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
711         @echo "$(CC) exim_dbmbuild.c"
712         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY \
713                 -o exim_dbmbuild.o exim_dbmbuild.c
714
715 # Utilities use special versions of some modules - typically with debugging
716 # calls cut out.
717
718 util-spool_in.o: $(HDRS) spool_in.c
719         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
720         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
721
722 util-store.o:    $(HDRS) store.c
723         @echo "$(CC) -DCOMPILE_UTILITY store.c"
724         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
725
726 util-string.o:   $(HDRS) string.c
727         @echo "$(CC) -DCOMPILE_UTILITY string.c"
728         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
729
730 util-md5.o:   $(HDRS) md5.c
731         @echo "$(CC) -DCOMPILE_UTILITY queue.c"
732         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-md5.o md5.c
733
734 util-queue.o:   $(HDRS) queue.c
735         @echo "$(CC) -DCOMPILE_UTILITY queue.c"
736         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-queue.o queue.c
737
738 util-tod.o:   $(HDRS) tod.c
739         @echo "$(CC) -DCOMPILE_UTILITY tod.c"
740         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tod.o tod.c
741
742 util-tree.o:   $(HDRS) tree.c
743         @echo "$(CC) -DCOMPILE_UTILITY tree.c"
744         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tree.o tree.c
745
746 util-os.o:       $(HDRS) os.c
747         @echo "$(CC) -DCOMPILE_UTILITY os.c"
748         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
749                                       -DCOMPILE_UTILITY \
750                                       -DOS_LOAD_AVERAGE \
751                                       -DFIND_RUNNING_INTERFACES \
752                                       -o util-os.o os.c
753
754 # The local scan module depends only on its own special header, and is compiled
755 # from a source whose location is set by configuration.
756
757 local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
758         @echo "$(CC) local_scan.c"
759         $(FE)$(CC) -DLOCAL_SCAN -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
760
761 # Dependencies for the "ordinary" exim modules
762
763 acl.o:           $(HDRS) acl.c
764 base64.o:        $(HDRS) mime.h base64.c
765 child.o:         $(HDRS) child.c
766 crypt16.o:       $(HDRS) crypt16.c
767 daemon.o:        $(HDRS) daemon.c
768 dbfn.o:          $(HDRS) dbfn.c
769 debug.o:         $(HDRS) debug.c
770 deliver.o:       $(HDRS) transports/smtp.h deliver.c
771 directory.o:     $(HDRS) directory.c
772 dns.o:           $(HDRS) dns.c
773 enq.o:           $(HDRS) enq.c
774 exim.o:          $(HDRS) exim.c
775 expand.o:        $(HDRS) expand.c
776 environment.o:   $(HDRS) environment.c
777 filter.o:        $(HDRS) filter.c
778 filtertest.o:    $(HDRS) filtertest.c
779 globals.o:       $(HDRS) globals.c
780 hash.o:          $(HDRS) hash.c
781 header.o:        $(HDRS) header.c
782 host.o:          $(HDRS) host.c
783 ip.o:            $(HDRS) ip.c
784 log.o:           $(HDRS) log.c
785 lss.o:           $(HDRS) lss.c
786 match.o:         $(HDRS) match.c
787 md5.o:           $(HDRS) md5.c
788 moan.o:          $(HDRS) moan.c
789 os.o:            $(HDRS) $(OS_C_INCLUDES) os.c
790 parse.o:         $(HDRS) parse.c
791 queue.o:         $(HDRS) queue.c
792 rda.o:           $(HDRS) rda.c
793 readconf.o:      $(HDRS) readconf.c
794 receive.o:       $(HDRS) receive.c
795 retry.o:         $(HDRS) retry.c
796 rewrite.o:       $(HDRS) rewrite.c
797 rfc2047.o:       $(HDRS) rfc2047.c
798 route.o:         $(HDRS) route.c
799 search.o:        $(HDRS) search.c
800 sieve.o:         $(HDRS) sieve.c
801 smtp_in.o:       $(HDRS) smtp_in.c
802 smtp_out.o:      $(HDRS) smtp_out.c
803 spool_in.o:      $(HDRS) spool_in.c
804 spool_out.o:     $(HDRS) spool_out.c
805 std-crypto.o:    $(HDRS) std-crypto.c
806 store.o:         $(HDRS) store.c
807 string.o:        $(HDRS) string.c
808 tls.o:           $(HDRS) tls.c \
809                  tls-gnu.c tlscert-gnu.c \
810                  tls-openssl.c tlscert-openssl.c \
811                  tls-cipher-stdname.c
812 tod.o:           $(HDRS) tod.c
813 transport.o:     $(HDRS) transport.c
814 tree.o:          $(HDRS) tree.c
815 verify.o:        $(HDRS) transports/smtp.h verify.c
816 dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
817 dkim_transport.o: $(HDRS) dkim_transport.c
818
819 # Dependencies for WITH_CONTENT_SCAN modules
820
821 malware.o:       $(HDRS) malware.c
822 mime.o:          $(HDRS) mime.h mime.c
823 regex.o:         $(HDRS) regex.c
824 spam.o:          $(HDRS) spam.c
825 spool_mbox.o:    $(HDRS) spool_mbox.c
826
827
828 # Dependencies for EXPERIMENTAL_* modules
829
830 arc.o:          $(HDRS) pdkim/pdkim.h arc.c
831 bmi_spam.o:     $(HDRS) bmi_spam.c
832 dane.o:         $(HDRS) dane.c dane-openssl.c
833 dcc.o:          $(HDRS) dcc.h dcc.c
834 dmarc.o:        $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
835 imap_utf7.o:    $(HDRS) imap_utf7.c
836 spf.o:          $(HDRS) spf.h spf.c
837 srs.o:          $(HDRS) srs.h srs.c
838 utf8.o:         $(HDRS) utf8.c
839
840 # The module containing tables of available lookups, routers, auths, and
841 # transports must be rebuilt if any of them are. However, because the makefiles
842 # for the drivers are always run, we don't actually put the dependencies here,
843 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
844 # drtables.o even though the .a files haven't in fact been updated. Instead
845 # it is arranged that the lower-level makefiles remove drtables.o when they
846 # rebuild the .a files.
847
848 drtables.o:      $(HDRS) drtables.c
849
850 # We depend upon object files built as part of building the lookups library
851 # When using parallel make, we don't have the dependency to force building
852 # in the sub-directory unless we force that dependency:
853
854 $(OBJ_LOOKUPS):  buildlookups
855
856 # The exim monitor's private modules - the sources live in a private
857 # subdirectory. The final binary combines the private modules with some
858 # modules from the main exim binary.
859
860 em_StripChart.o: ../exim_monitor/em_StripChart.c
861 em_TextPop.o:    ../exim_monitor/em_TextPop.c
862 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
863 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
864 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
865 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
866 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
867 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
868 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
869 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
870 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
871 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
872 $(MONBIN): $(HDRS)
873                  @echo "$(CC) exim_monitor/$(@:.o=.c)"
874                  $(FE)$(CC) -o $@ -c $(CFLAGS) -DCOMPILE_UTILITY -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
875                    ../exim_monitor/$(@:.o=.c)
876
877
878 # Targets for the various libraries that Exim uses.
879
880 # The lookups library.
881
882 buildlookups: config
883          @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
884            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
885            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
886            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
887          @echo " "
888
889 # The routers library.
890
891 buildrouters: config
892          @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
893            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
894            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
895          @echo " "
896
897 # The transports library.
898
899 buildtransports: config
900          @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
901            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
902            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
903          @echo " "
904
905 # The library of authorization modules
906
907 buildauths: config
908          @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
909            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
910            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
911          @echo " "
912
913 # The PDKIM library
914
915 buildpdkim: pdkim/pdkim.a
916 pdkim/pdkim.a: config
917          @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
918            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
919            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
920          @echo " "
921
922 # The "clean", "install", and "makefile" targets just pass themselves back to
923 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
924 # for them in the build directory.
925
926 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
927
928 # Targets for building stand-alone testing programs for basic testing of
929 # some of the building blocks. These are not integrated with the makefile-
930 # building targets. If you change something that is going to cause the
931 # makefile to be rebuilt, you must run "make makefile" before running one
932 # of these.
933
934 # The testing programs use different versions of some modules - usually
935 # with bits cut out that are not relevant to the test in hand. For those
936 # that are used by several tests, we use a different name.
937
938 sa-globals.o:    $(HDRS) globals.c
939         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
940
941 sa-os.o:         $(HDRS) os.c
942         $(CC) -c $(CFLAGS) $(INCLUDE) \
943                                       -DFIND_RUNNING_INTERFACES \
944                                       -o sa-os.o os.c
945
946 # These are the test targets themselves
947
948 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
949                string.o tod.o version.o utf8.o
950         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
951         $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY store.c
952         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
953           dummies.o sa-globals.o sa-os.o store.o string.o \
954           tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
955         rm -f dbfn.o store.o
956
957 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
958                store.o string.o tod.o tree.o
959         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
960         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
961         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
962         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
963         $(LNCC) -o test_host $(LFLAGS) \
964           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
965           tod.o tree.o $(LIBS) $(LIBRESOLV)
966         rm -f child.o dummies.o host.o dns.o
967
968 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
969         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
970         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
971           sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
972         rm -f os.o
973
974 test_parse:  config.h parse.c dummies.o sa-globals.o \
975              store.o string.o tod.o version.o utf8.o
976         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
977         $(LNCC) -o test_parse $(LFLAGS) parse.o \
978           dummies.o sa-globals.o store.o string.o tod.o version.o \
979           utf8.o $(LDFLAGS)
980         rm -f parse.o
981
982 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
983         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
984         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
985           dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
986         rm -f string.o
987
988 # End