Avoid writing msglog files in -bh and -bhc modes. Bug 1804
[exim.git] / src / OS / Makefile-Base
1 # This file is the basis of the main makefile for Exim and friends. The
2 # makefile at the top level arranges to build the main makefile by calling
3 # scripts/Configure-Makefile from within the build directory. This
4 # concatentates the configuration settings from Local/Makefile and other,
5 # optional, Local/* files at the front of this file, to create Makefile in the
6 # build directory.
7 #
8 # Copyright (c) The Exim Maintainers 2016
9
10 SHELL      = $(MAKE_SHELL)
11 SCRIPTS    = ../scripts
12 O          = ../OS
13 EDITME     = ../Local/Makefile
14 EXIMON_EDITME = ../Local/eximon.conf
15
16 # The compiler used for linking is normally the same as the compiler used for
17 # compiling. However, by giving it a different name, we can override it from
18 # the command line, and this is helpful for certain types of testing.
19
20 LNCC = $(CC)
21
22 # The compile commands can be very long. To make the output look better,
23 # they are not normally echoed in full. To get full echoing, the caller
24 # must set FULLECHO='' on the command line and call make with -e. We default
25 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
26
27 FULLECHO = @
28 FE       = $(FULLECHO)
29
30 # The default target double-checks the existence of $(EDITME) and then arranges
31 # to touch it if it exists and any of the optional configuration files, which
32 # depend on the os or the architecture, have been altered. The same sub-target
33 # does the same thing for the eximon configuration file if it exists. Then
34 # there is a check that the Makefile (the one built from this file) is
35 # up-to-date. Then the os-specific source files and the C configuration file
36 # are set up, and finally it goes to the main Exim target.
37
38 all:       utils exim
39 config:    $(EDITME) checklocalmake Makefile os.c config.h version.h
40
41 checklocalmake: 
42         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
43           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
44           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
45         then \
46           touch $(EDITME); \
47         fi
48         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
49           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
50           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
51         then \
52           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
53         fi
54
55 $(EDITME):
56         @echo " "
57         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
58         @echo "*** appropriate changes for your site."
59         @echo " "
60         @false
61
62 $(EXIMON_EDITME):
63         @echo " "
64         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
65         @echo "*** appropriate changes for your site."
66         @echo " "
67         @test ! -d ../Local && mkdir ../Local
68         @false
69
70 # Check that the local Makefile is up-to-date
71
72 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
73           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
74         @echo " "
75         @echo "*** Makefile needs rebuilding"
76         @echo "*** Please run \"make makefile\" at top level"
77         @echo " "
78         @false
79
80 # Build (link) the os.h file
81
82 os.h:   $(SCRIPTS)/Configure-os.h \
83         $(O)/os.h-AIX           $(O)/os.h-BSDI  $(O)/os.h-cygwin \
84         $(O)/os.h-Darwin        $(O)/os.h-DGUX  $(O)/os.h-DragonFly \
85         $(O)/os.h-FreeBSD       $(O)/os.h-GNU   $(O)/os.h-GNUkFreeBSD \
86         $(O)/os.h-GNUkNetBSD    $(O)/os.h-HI-OSF \
87         $(O)/os.h-HI-UX         $(O)/os.h-HP-UX $(O)/os.h-HP-UX-9 \
88         $(O)/os.h-IRIX          $(O)/os.h-IRIX6 $(O)/os.h-IRIX632 \
89         $(O)/os.h-IRIX65        $(O)/os.h-Linux $(O)/os.h-mips \
90         $(O)/os.h-NetBSD        $(O)/os.h-NetBSD-a.out \
91         $(O)/os.h-OpenBSD       $(O)/os.h-OpenUNIX      $(O)/os.h-OSF1 \
92         $(O)/os.h-QNX           $(O)/os.h-SCO           $(O)/os.h-SCO_SV \
93         $(O)/os.h-SunOS4        $(O)/os.h-SunOS5        $(O)/os.h-SunOS5-hal \
94         $(O)/os.h-ULTRIX        $(O)/os.h-UNIX_SV \
95         $(O)/os.h-Unixware7     $(O)/os.h-USG
96         $(SHELL) $(SCRIPTS)/Configure-os.h
97
98 # Build the os.c file
99
100 os.c:   ../src/os.c \
101         $(SCRIPTS)/Configure-os.c \
102         $(O)/os.c-cygwin        $(O)/os.c-GNU   $(O)/os.c-HI-OSF \
103         $(O)/os.c-IRIX          $(O)/os.c-IRIX6 $(O)/os.c-IRIX632 \
104         $(O)/os.c-IRIX65        $(O)/os.c-Linux $(O)/os.c-OSF1
105         $(SHELL) $(SCRIPTS)/Configure-os.c
106
107 # Build the config.h file.
108
109 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
110         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
111
112
113 # This target is recognized specially by GNU make. It records those targets
114 # that do not correspond to files that are being built and which should
115 # therefore always be run, even if the files exist. This shouldn't in fact be a
116 # problem, but it does no harm. Other make programs will just ignore this.
117
118 .PHONY: all config utils \
119         buildauths buildlookups buildpdkim buildrouters \
120         buildtransports checklocalmake clean
121
122
123 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
124         exigrep eximstats exipick exiqgrep exiqsumm \
125         transport-filter.pl convert4r3 convert4r4 \
126         exim_checkaccess \
127         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
128
129
130 # Targets for special-purpose configuration header builders
131 buildconfig: buildconfig.c
132         @echo "$(CC) buildconfig.c"
133         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
134
135
136 # Target for the exicyclog utility script
137 exicyclog: config ../src/exicyclog.src
138         @rm -f exicyclog
139         @sed \
140           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
141           -e "/^# /p" \
142           -e "/^# /d" \
143           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
144           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
145           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
146           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
147           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
148           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
149           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
150           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
151           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
152           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
153           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
154           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
155           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
156           ../src/exicyclog.src > exicyclog-t
157         @mv exicyclog-t exicyclog
158         @chmod a+x exicyclog
159         @echo ">>> exicyclog script built"
160
161 # Target for the exinext utility script
162 exinext: config ../src/exinext.src
163         @rm -f exinext
164         @sed \
165           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
166           -e "/^# /p" \
167           -e "/^# /d" \
168           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
169           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
170           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
171           ../src/exinext.src > exinext-t
172         @mv exinext-t exinext
173         @chmod a+x exinext
174         @echo ">>> exinext script built"
175
176 # Target for the exiwhat utility script
177 exiwhat: config ../src/exiwhat.src
178         @rm -f exiwhat
179         @sed \
180           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
181           -e "/^# /p" \
182           -e "/^# /d" \
183           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
184           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
185           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
186           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
187           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
188           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
189           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
190           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
191           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
192           ../src/exiwhat.src > exiwhat-t
193         @mv exiwhat-t exiwhat
194         @chmod a+x exiwhat
195         @echo ">>> exiwhat script built"
196
197 # Target for the exim_checkaccess utility script
198 exim_checkaccess: config ../src/exim_checkaccess.src
199         @rm -f exim_checkaccess
200         @sed \
201           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
202           -e "/^# /p" \
203           -e "/^# /d" \
204           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
205           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
206           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
207           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
208           ../src/exim_checkaccess.src > exim_checkaccess-t
209         @mv exim_checkaccess-t exim_checkaccess
210         @chmod a+x exim_checkaccess
211         @echo ">>> exim_checkaccess script built"; echo ""
212
213 # Target for the Exim monitor start-up script
214 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
215           ../Local/eximon.conf
216         @rm -f eximon
217         $(SHELL) $(SCRIPTS)/Configure-eximon
218         @sed \
219           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
220           -e "/^# /p" \
221           -e "/^# /d" \
222           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
223           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
224           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
225           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
226           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
227           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
228           ../src/eximon.src >> eximon
229         @echo ">>> eximon script built"; echo ""
230
231 # Targets for utilities; these are all Perl scripts that have to get the
232 # location of Perl put in them. A few need other things as well.
233
234 exigrep: Makefile ../src/exigrep.src
235         @rm -f exigrep
236         @sed \
237           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
238           -e "/^# /p" \
239           -e "/^# /d" \
240           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
241           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
242           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
243           ../src/exigrep.src > exigrep-t
244         @mv exigrep-t exigrep
245         @chmod a+x exigrep
246         @echo ">>> exigrep script built"
247
248 eximstats: Makefile ../src/eximstats.src
249         @rm -f eximstats
250         @sed \
251           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
252           ../src/eximstats.src > eximstats-t
253         @mv eximstats-t eximstats
254         @chmod a+x eximstats
255         @echo ">>> eximstats script built"
256
257 exiqgrep: Makefile ../src/exiqgrep.src
258         @rm -f exiqgrep
259         @sed \
260           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
261           -e "/^# /p" \
262           -e "/^# /d" \
263           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
264           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
265           ../src/exiqgrep.src > exiqgrep-t
266         @mv exiqgrep-t exiqgrep
267         @chmod a+x exiqgrep
268         @echo ">>> exiqgrep script built"
269
270 exiqsumm: Makefile ../src/exiqsumm.src
271         @rm -f exiqsumm
272         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
273           ../src/exiqsumm.src > exiqsumm-t
274         @mv exiqsumm-t exiqsumm
275         @chmod a+x exiqsumm
276         @echo ">>> exiqsumm script built"
277
278 exipick: Makefile ../src/exipick.src
279         @rm -f exipick
280         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
281           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
282           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
283           ../src/exipick.src > exipick-t
284         @mv exipick-t exipick
285         @chmod a+x exipick
286         @echo ">>> exipick script built"
287
288 transport-filter.pl: Makefile ../src/transport-filter.src
289         @rm -f transport-filter.pl
290         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
291           ../src/transport-filter.src > transport-filter.pl-t
292         @mv transport-filter.pl-t transport-filter.pl
293         @chmod a+x transport-filter.pl
294         @echo ">>> transport-filter.pl script built"
295
296 convert4r3: Makefile ../src/convert4r3.src
297         @rm -f convert4r3
298         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
299           ../src/convert4r3.src > convert4r3-t
300         @mv convert4r3-t convert4r3
301         @chmod a+x convert4r3
302         @echo ">>> convert4r3 script built"
303
304 convert4r4: Makefile ../src/convert4r4.src
305         @rm -f convert4r4
306         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
307           ../src/convert4r4.src > convert4r4-t
308         @mv convert4r4-t convert4r4
309         @chmod a+x convert4r4
310         @echo ">>> convert4r4 script built"
311
312
313 # These are objects of optional features. They are always compiled, but
314 # if the corresponding #defines are not set, they wind up empty and
315 # are thrown away by the linker.
316
317 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
318 OBJ_EXPERIMENTAL = bmi_spam.o \
319                                 dane.o \
320                                 dcc.o \
321                                 dmarc.o \
322                                 imap_utf7.o \
323                                 spf.o \
324                                 srs.o \
325                                 utf8.o
326
327 # Targets for final binaries; the main one has a build number which is
328 # updated each time. We don't bother with that for the auxiliaries.
329
330 OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
331
332 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
333         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
334         filtertest.o globals.o dkim.o \
335         header.o host.o ip.o log.o lss.o match.o moan.o \
336         os.o parse.o queue.o \
337         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
338         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
339         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
340         environment.o \
341         $(OBJ_LOOKUPS) \
342         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
343         $(OBJ_EXPERIMENTAL)
344
345 exim:   buildlookups buildauths pdkim/pdkim.a \
346         buildrouters buildtransports \
347         $(OBJ_EXIM) version.o
348         @echo "$(LNCC) -o exim"
349         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
350           routers/routers.a transports/transports.a lookups/lookups.a \
351           auths/auths.a pdkim/pdkim.a \
352           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
353           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
354           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
355         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
356           echo $(STRIP_COMMAND) exim; \
357           $(STRIP_COMMAND) exim; \
358         fi
359         $(EXIM_CHMOD)
360         @echo " "
361         @echo ">>> exim binary built"
362         @echo " "
363
364 # The utility for dumping the contents of an exim database
365
366 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
367
368 exim_dumpdb: $(OBJ_DUMPDB)
369         @echo "$(LNCC) -o exim_dumpdb"
370         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
371           $(LIBS) $(EXTRALIBS) $(DBMLIB)
372         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
373           echo $(STRIP_COMMAND) exim_dumpdb; \
374           $(STRIP_COMMAND) exim_dumpdb; \
375         fi
376         @echo ">>> exim_dumpdb utility built"
377         @echo " "
378
379 # The utility for interrogating/fixing the contents of an exim database
380
381 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
382
383 exim_fixdb:  $(OBJ_FIXDB) buildauths
384         @echo "$(LNCC) -o exim_fixdb"
385         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
386           auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
387         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
388           echo $(STRIP_COMMAND) exim_fixdb; \
389           $(STRIP_COMMAND) exim_fixdb; \
390         fi
391         @echo ">>> exim_fixdb utility built"
392         @echo " "
393
394 # The utility for tidying the contents of an exim database
395
396 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
397
398 exim_tidydb: $(OBJ_TIDYDB)
399         @echo "$(LNCC) -o exim_tidydb"
400         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
401           $(LIBS) $(EXTRALIBS) $(DBMLIB)
402         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
403           echo $(STRIP_COMMAND) exim_tidydb; \
404           $(STRIP_COMMAND) exim_tidydb; \
405         fi
406         @echo ">>> exim_tidydb utility built"
407         @echo " "
408
409 # The utility for building dbm files
410
411 exim_dbmbuild: exim_dbmbuild.o
412         @echo "$(LNCC) -o exim_dbmbuild"
413         $(FE)$(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
414           $(LIBS) $(EXTRALIBS) $(DBMLIB)
415         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
416           echo $(STRIP_COMMAND) exim_dbmbuild; \
417           $(STRIP_COMMAND) exim_dbmbuild; \
418         fi
419         @echo ">>> exim_dbmbuild utility built"
420         @echo " "
421
422 # The utility for locking a mailbox while messing around with it
423
424 exim_lock: exim_lock.c os.h
425         @echo "$(CC) exim_lock.c"
426         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
427         @echo "$(LNCC) -o exim_lock"
428         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
429           $(LIBS) $(EXTRALIBS)
430         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
431           echo $(STRIP_COMMAND) exim_lock; \
432           $(STRIP_COMMAND) exim_lock; \
433         fi
434         @echo ">>> exim_lock utility built"
435         @echo " "
436
437 # The X-based Exim monitor program's binary part. There's a macro for cutting
438 # out the modified TextPop module, because some antique link editors cannot
439 # handle the fact that it is redefining things that are found later in the
440 # Xaw library.
441
442 # Object modules that are the unique Eximon modules
443
444 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
445         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
446         em_text.o em_xs.o
447
448 # The complete modules list also includes some specially compiled versions of
449 # code from the main Exim source tree.
450
451 OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
452
453 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
454             ../exim_monitor/em_version.c
455         @echo "$(CC) exim_monitor/em_version.c"
456         $(FE)$(CC) -o em_version.o -c \
457           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
458         @echo "$(LNCC) -o eximon.bin"
459         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
460           $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
461           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
462         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
463           echo $(STRIP_COMMAND) eximon.bin; \
464           $(STRIP_COMMAND) eximon.bin; \
465         fi
466         @echo ">>> exim monitor binary built"
467         @echo " "
468
469
470 # Compile step for most of the exim modules. HDRS is a list of headers
471 # which cause everthing to be rebuilt. PHDRS is the same, for the use
472 # of routers, transports, and authenticators. I can't find a way of doing this
473 # in one. This list is overkill, but it doesn't really take much time to
474 # rebuild Exim on a modern computer.
475
476 HDRS  = config.h \
477         dbfunctions.h \
478         dbstuff.h \
479         exim.h \
480         functions.h \
481         globals.h \
482         local_scan.h \
483         macros.h \
484         mytypes.h \
485         structs.h \
486         os.h
487 PHDRS = ../config.h \
488         ../dbfunctions.h \
489         ../dbstuff.h \
490         ../exim.h \
491         ../functions.h \
492         ../globals.h \
493         ../local_scan.h \
494         ../macros.h \
495         ../mytypes.h \
496         ../structs.h \
497         ../os.h
498
499 .SUFFIXES: .o .c
500 .c.o:;  @echo "$(CC) $*.c"
501         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
502
503 # Update Exim's version information and build the version object.
504
505 version.h::
506         @../scripts/reversion
507
508 cnumber.h: version.h
509
510 version.o: $(HDRS) cnumber.h version.h version.c
511
512 # This is the dummy module for use by test compiles of individual modules. It
513 # contains functions such as log_write() that may be called from bits of Exim
514 # in the tested code.
515
516 dummies.o:       dummies.c
517
518 # Compile instructions for perl.o for when EXIM_PERL is set
519
520 perl.o:          $(HDRS) perl.c
521         @echo "$(PERL_CC) perl.c"
522         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
523
524 # Compile instructions for the database utility modules
525
526 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
527         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
528         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
529                                       -DCOMPILE_UTILITY \
530                                       -DEXIM_DUMPDB \
531                                       -o exim_dumpdb.o exim_dbutil.c
532
533 exim_fixdb.o:    $(HDRS) exim_dbutil.c
534         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
535         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
536                                       -DCOMPILE_UTILITY \
537                                       -DEXIM_FIXDB \
538                                       -o exim_fixdb.o exim_dbutil.c
539
540 exim_tidydb.o:   $(HDRS) exim_dbutil.c
541         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
542         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
543                                       -DCOMPILE_UTILITY \
544                                       -DEXIM_TIDYDB \
545                                       -o exim_tidydb.o exim_dbutil.c
546
547 # Compile instructions for exim_dbmbuild
548
549 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
550         @echo "$(CC) exim_dbmbuild.c"
551         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
552
553 # Utilities use special versions of some modules - typically with debugging
554 # calls cut out.
555
556 util-spool_in.o: $(HDRS) spool_in.c
557         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
558         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
559
560 util-store.o:    $(HDRS) store.c
561         @echo "$(CC) -DCOMPILE_UTILITY store.c"
562         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
563
564 util-string.o:   $(HDRS) string.c
565         @echo "$(CC) -DCOMPILE_UTILITY string.c"
566         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
567
568 util-os.o:       $(HDRS) os.c
569         @echo "$(CC) -DCOMPILE_UTILITY os.c"
570         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
571                                       -DCOMPILE_UTILITY \
572                                       -DOS_LOAD_AVERAGE \
573                                       -DFIND_RUNNING_INTERFACES \
574                                       -o util-os.o os.c
575
576 # The local scan module depends only on its own special header, and is compiled
577 # from a source whose location is set by configuration.
578
579 local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
580         @echo "$(CC) local_scan.c"
581         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
582
583 # Dependencies for the "ordinary" exim modules
584
585 acl.o:           $(HDRS) acl.c
586 base64.o:        $(HDRS) mime.h base64.c
587 child.o:         $(HDRS) child.c
588 crypt16.o:       $(HDRS) crypt16.c
589 daemon.o:        $(HDRS) daemon.c
590 dbfn.o:          $(HDRS) dbfn.c
591 debug.o:         $(HDRS) debug.c
592 deliver.o:       $(HDRS) deliver.c
593 directory.o:     $(HDRS) directory.c
594 dns.o:           $(HDRS) dns.c
595 enq.o:           $(HDRS) enq.c
596 exim.o:          $(HDRS) exim.c
597 expand.o:        $(HDRS) expand.c
598 environment.o:   $(HDRS) environment.c
599 filter.o:        $(HDRS) filter.c
600 filtertest.o:    $(HDRS) filtertest.c
601 globals.o:       $(HDRS) globals.c
602 header.o:        $(HDRS) header.c
603 host.o:          $(HDRS) host.c
604 ip.o:            $(HDRS) ip.c
605 log.o:           $(HDRS) log.c
606 lss.o:           $(HDRS) lss.c
607 match.o:         $(HDRS) match.c
608 moan.o:          $(HDRS) moan.c
609 os.o:            $(HDRS) $(OS_C_INCLUDES) os.c
610 parse.o:         $(HDRS) parse.c
611 queue.o:         $(HDRS) queue.c
612 rda.o:           $(HDRS) rda.c
613 readconf.o:      $(HDRS) readconf.c
614 receive.o:       $(HDRS) receive.c
615 retry.o:         $(HDRS) retry.c
616 rewrite.o:       $(HDRS) rewrite.c
617 rfc2047.o:       $(HDRS) rfc2047.c
618 route.o:         $(HDRS) route.c
619 search.o:        $(HDRS) search.c
620 sieve.o:         $(HDRS) sieve.c
621 smtp_in.o:       $(HDRS) smtp_in.c
622 smtp_out.o:      $(HDRS) smtp_out.c
623 spool_in.o:      $(HDRS) spool_in.c
624 spool_out.o:     $(HDRS) spool_out.c
625 std-crypto.o:    $(HDRS) std-crypto.c
626 store.o:         $(HDRS) store.c
627 string.o:        $(HDRS) string.c
628 tls.o:           $(HDRS) tls.c \
629                  tls-gnu.c tlscert-gnu.c \
630                  tls-openssl.c tlscert-openssl.c
631 tod.o:           $(HDRS) tod.c
632 transport.o:     $(HDRS) transport.c
633 tree.o:          $(HDRS) tree.c
634 verify.o:        $(HDRS) verify.c
635 dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
636
637 # Dependencies for WITH_CONTENT_SCAN modules
638
639 malware.o:       $(HDRS) malware.c
640 mime.o:          $(HDRS) mime.h mime.c
641 regex.o:         $(HDRS) regex.c
642 spam.o:          $(HDRS) spam.c
643 spool_mbox.o:    $(HDRS) spool_mbox.c
644
645
646 # Dependencies for EXPERIMENTAL_* modules
647
648 bmi_spam.o:     $(HDRS) bmi_spam.c
649 dane.o:         $(HDRS) dane.c dane-gnu.c dane-openssl.c
650 dcc.o:          $(HDRS) dcc.h dcc.c
651 dmarc.o:        $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
652 imap_utf7.o:    $(HDRS) imap_utf7.c
653 spf.o:          $(HDRS) spf.h spf.c
654 srs.o:          $(HDRS) srs.h srs.c
655 utf8.o:         $(HDRS) utf8.c
656
657 # The module containing tables of available lookups, routers, auths, and
658 # transports must be rebuilt if any of them are. However, because the makefiles
659 # for the drivers are always run, we don't actually put the dependencies here,
660 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
661 # drtables.o even though the .a files haven't in fact been updated. Instead
662 # it is arranged that the lower-level makefiles remove drtables.o when they
663 # rebuild the .a files.
664
665 drtables.o:      $(HDRS) drtables.c
666
667 # We depend upon object files built as part of building the lookups library
668 # When using parallel make, we don't have the dependency to force building
669 # in the sub-directory unless we force that dependency:
670
671 $(OBJ_LOOKUPS):  buildlookups
672
673 # The exim monitor's private modules - the sources live in a private
674 # subdirectory. The final binary combines the private modules with some
675 # modules from the main exim binary.
676
677 em_StripChart.o: ../exim_monitor/em_StripChart.c
678 em_TextPop.o:    ../exim_monitor/em_TextPop.c
679 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
680 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
681 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
682 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
683 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
684 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
685 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
686 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
687 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
688 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
689 $(MONBIN): $(HDRS)
690                  @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
691                  $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
692                    ../exim_monitor/`echo $@ | sed 's/o$$/c/'`
693
694
695 # Targets for the various libraries that Exim uses.
696
697 # The lookups library.
698
699 buildlookups: config
700          @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
701            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
702            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
703            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
704          @echo " "
705
706 # The routers library.
707
708 buildrouters: config
709          @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
710            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
711            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
712          @echo " "
713
714 # The transports library.
715
716 buildtransports: config
717          @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
718            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
719            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
720          @echo " "
721
722 # The library of authorization modules
723
724 buildauths: config
725          @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
726            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
727            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
728          @echo " "
729
730 # The PDKIM library
731
732 buildpdkim: pdkim/pdkim.a
733 pdkim/pdkim.a: config
734          @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
735            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
736            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
737          @echo " "
738
739 # The "clean", "install", and "makefile" targets just pass themselves back to
740 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
741 # for them in the build directory.
742
743 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
744
745 # Targets for building stand-alone testing programs for basic testing of
746 # some of the building blocks. These are not integrated with the makefile-
747 # building targets. If you change something that is going to cause the
748 # makefile to be rebuilt, you must run "make makefile" before running one
749 # of these.
750
751 # The testing programs use different versions of some modules - usually
752 # with bits cut out that are not relevant to the test in hand. For those
753 # that are used by several tests, we use a different name.
754
755 sa-globals.o:    $(HDRS) globals.c
756         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
757
758 sa-os.o:         $(HDRS) os.c
759         $(CC) -c $(CFLAGS) $(INCLUDE) \
760                                       -DFIND_RUNNING_INTERFACES \
761                                       -o sa-os.o os.c
762
763 # These are the test targets themselves
764
765 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
766                string.o tod.o version.o utf8.o
767         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
768         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
769           dummies.o sa-globals.o sa-os.o store.o string.o \
770           tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
771         rm -f dbfn.o
772
773 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
774                store.o string.o tod.o tree.o
775         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
776         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
777         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
778         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
779         $(LNCC) -o test_host $(LFLAGS) \
780           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
781           tod.o tree.o $(LIBS) $(LIBRESOLV)
782         rm -f child.o dummies.o host.o dns.o
783
784 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
785         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
786         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
787           sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
788         rm -f os.o
789
790 test_parse:  config.h parse.c dummies.o sa-globals.o \
791              store.o string.o tod.o version.o utf8.o
792         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
793         $(LNCC) -o test_parse $(LFLAGS) parse.o \
794           dummies.o sa-globals.o store.o string.o tod.o version.o \
795           utf8.o $(LDFLAGS)
796         rm -f parse.o
797
798 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
799         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
800         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
801           dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
802         rm -f string.o
803
804 # End