src/OS/Makefile-Base

   1 # $Cambridge: exim/src/OS/Makefile-Base,v 1.17 2009/06/10 07:34:04 tom Exp $
   2
   3 # This file is the basis of the main makefile for Exim and friends. The
   4 # makefile at the top level arranges to build the main makefile by calling
   5 # scripts/Configure-Makefile from within the build directory. This
   6 # concatentates the configuration settings from Local/Makefile and other,
   7 # optional, Local/* files at the front of this file, to create Makefile in the
   8 # build directory.
   9
  10 SHELL      = $(MAKE_SHELL)
  11 SCRIPTS    = ../scripts
  12 EDITME     = ../Local/Makefile
  13 EXIMON_EDITME = ../Local/eximon.conf
  14
  15 # The compiler used for linking is normally the same as the compiler used for
  16 # compiling. However, by giving it a different name, we can override it from
  17 # the command line, and this is helpful for certain types of testing.
  18
  19 LNCC = $(CC)
  20
  21 # The compile commands can be very long. To make the output look better,
  22 # they are not normally echoed in full. To get full echoing, the caller
  23 # must set FULLECHO='' on the command line and call make with -e. We default
  24 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
  25
  26 FULLECHO = @
  27 FE       = $(FULLECHO)
  28
  29 # The default target double-checks the existence of $(EDITME) and then arranges
  30 # to touch it if it exists and any of the optional configuration files, which
  31 # depend on the os or the architecture, have been altered. The same sub-target
  32 # does the same thing for the eximon configuration file if it exists. Then
  33 # there is a check that the Makefile (the one built from this file) is
  34 # up-to-date. Then the os-specific source files and the C configuration file
  35 # are set up, and finally it goes to the main Exim target.
  36
  37 all:    $(EDITME) checklocalmake Makefile os.h os.c config.h allexim
  38
  39 checklocalmake:
  40         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
  41           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
  42           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
  43         then \
  44           touch $(EDITME); \
  45         fi
  46         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
  47           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
  48           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
  49         then \
  50           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
  51         fi
  52
  53 $(EDITME):
  54         @echo " "
  55         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
  56         @echo "*** appropriate changes for your site."
  57         @echo " "
  58         @false
  59
  60 $(EXIMON_EDITME):
  61         @echo " "
  62         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
  63         @echo "*** appropriate changes for your site."
  64         @echo " "
  65         @test ! -d ../Local && mkdir ../Local
  66         @false
  67
  68 # Check that the local Makefile is up-to-date
  69
  70 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
  71           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
  72         @echo " "
  73         @echo "*** Makefile needs rebuilding"
  74         @echo "*** Please run \"make makefile\" at top level"
  75         @echo " "
  76         @false
  77
  78 # Build (link) the os.h file
  79
  80 os.h:
  81         $(SHELL) $(SCRIPTS)/Configure-os.h
  82
  83 # Build the os.c file
  84
  85 os.c:   ../src/os.c
  86         $(SHELL) $(SCRIPTS)/Configure-os.c
  87
  88 # Build the config.h file.
  89
  90 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
  91         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
  92
  93
  94 # This target is recognized specially by GNU make. It records those targets
  95 # that do not correspond to files that are being built and which should
  96 # therefore always be run, even if the files exist. This shouldn't in fact be a
  97 # problem, but it does no harm. Other make programs will just ignore this.
  98
  99 .PHONY: all allexim buildauths buildlookups buildpdkim buildrouters \
 100         buildtransports checklocalmake clean
 101
 102
 103 # This is the real default target for all the various exim binaries and
 104 # scripts, once the configuring stuff is done.
 105
 106 allexim: config.h $(EXIM_MONITOR) exicyclog exinext exiwhat \
 107         exigrep eximstats exipick exiqgrep exiqsumm \
 108         transport-filter.pl convert4r3 convert4r4 \
 109         exim_checkaccess \
 110         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \
 111         buildlookups buildrouters buildtransports \
 112         buildauths buildpdkim exim
 113
 114
 115 # Targets for special-purpose configuration header builders
 116 buildconfig: buildconfig.c
 117         @echo "$(CC) buildconfig.c"
 118         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
 119
 120
 121 # Target for the exicyclog utility script
 122 exicyclog: Makefile config.h ../src/exicyclog.src
 123         @rm -f exicyclog
 124         @sed \
 125           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 126           -e "/^# /p" \
 127           -e "/^# /d" \
 128           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 129           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
 130           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 131           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 132           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
 133           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
 134           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 135           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
 136           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
 137           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
 138           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
 139           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 140           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
 141           ../src/exicyclog.src > exicyclog-t
 142         @mv exicyclog-t exicyclog
 143         @chmod a+x exicyclog
 144         @echo ">>> exicyclog script built"
 145
 146 # Target for the exinext utility script
 147 exinext: Makefile config.h ../src/exinext.src
 148         @rm -f exinext
 149         @sed \
 150           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 151           -e "/^# /p" \
 152           -e "/^# /d" \
 153           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 154           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 155           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 156           ../src/exinext.src > exinext-t
 157         @mv exinext-t exinext
 158         @chmod a+x exinext
 159         @echo ">>> exinext script built"
 160
 161 # Target for the exiwhat utility script
 162 exiwhat: Makefile config.h ../src/exiwhat.src
 163         @rm -f exiwhat
 164         @sed \
 165           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 166           -e "/^# /p" \
 167           -e "/^# /d" \
 168           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 169           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 170           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 171           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
 172           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
 173           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
 174           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
 175           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
 176           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
 177           ../src/exiwhat.src > exiwhat-t
 178         @mv exiwhat-t exiwhat
 179         @chmod a+x exiwhat
 180         @echo ">>> exiwhat script built"
 181
 182 # Target for the exim_checkaccess utility script
 183 exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
 184         @rm -f exim_checkaccess
 185         @sed \
 186           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 187           -e "/^# /p" \
 188           -e "/^# /d" \
 189           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 190           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 191           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 192           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 193           ../src/exim_checkaccess.src > exim_checkaccess-t
 194         @mv exim_checkaccess-t exim_checkaccess
 195         @chmod a+x exim_checkaccess
 196         @echo ">>> exim_checkaccess script built"; echo ""
 197
 198 # Target for the Exim monitor start-up script
 199 eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \
 200           ../Local/eximon.conf
 201         @rm -f eximon
 202         $(SHELL) $(SCRIPTS)/Configure-eximon
 203         @sed \
 204           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 205           -e "/^# /p" \
 206           -e "/^# /d" \
 207           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 208           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 209           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 210           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
 211           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
 212           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
 213           ../src/eximon.src >> eximon
 214         @echo ">>> eximon script built"; echo ""
 215
 216 # Targets for utilities; these are all Perl scripts that have to get the
 217 # location of Perl put in them. A few need other things as well.
 218
 219 exigrep: Makefile ../src/exigrep.src
 220         @rm -f exigrep
 221         @sed \
 222           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 223           -e "/^# /p" \
 224           -e "/^# /d" \
 225           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 226           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
 227           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 228           ../src/exigrep.src > exigrep-t
 229         @mv exigrep-t exigrep
 230         @chmod a+x exigrep
 231         @echo ">>> exigrep script built"
 232
 233 eximstats: Makefile ../src/eximstats.src
 234         @rm -f eximstats
 235         @sed \
 236           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 237           ../src/eximstats.src > eximstats-t
 238         @mv eximstats-t eximstats
 239         @chmod a+x eximstats
 240         @echo ">>> eximstats script built"
 241
 242 exiqgrep: Makefile ../src/exiqgrep.src
 243         @rm -f exiqgrep
 244         @sed \
 245           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 246           -e "/^# /p" \
 247           -e "/^# /d" \
 248           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 249           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 250           ../src/exiqgrep.src > exiqgrep-t
 251         @mv exiqgrep-t exiqgrep
 252         @chmod a+x exiqgrep
 253         @echo ">>> exiqgrep script built"
 254
 255 exiqsumm: Makefile ../src/exiqsumm.src
 256         @rm -f exiqsumm
 257         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 258           ../src/exiqsumm.src > exiqsumm-t
 259         @mv exiqsumm-t exiqsumm
 260         @chmod a+x exiqsumm
 261         @echo ">>> exiqsumm script built"
 262
 263 exipick: Makefile ../src/exipick.src
 264         @rm -f exipick
 265         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 266           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
 267           ../src/exipick.src > exipick-t
 268         @mv exipick-t exipick
 269         @chmod a+x exipick
 270         @echo ">>> exipick script built"
 271
 272 transport-filter.pl: Makefile ../src/transport-filter.src
 273         @rm -f transport-filter.pl
 274         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 275           ../src/transport-filter.src > transport-filter.pl-t
 276         @mv transport-filter.pl-t transport-filter.pl
 277         @chmod a+x transport-filter.pl
 278         @echo ">>> transport-filter.pl script built"
 279
 280 convert4r3: Makefile ../src/convert4r3.src
 281         @rm -f convert4r3
 282         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 283           ../src/convert4r3.src > convert4r3-t
 284         @mv convert4r3-t convert4r3
 285         @chmod a+x convert4r3
 286         @echo ">>> convert4r3 script built"
 287
 288 convert4r4: Makefile ../src/convert4r4.src
 289         @rm -f convert4r4
 290         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 291           ../src/convert4r4.src > convert4r4-t
 292         @mv convert4r4-t convert4r4
 293         @chmod a+x convert4r4
 294         @echo ">>> convert4r4 script built"
 295
 296
 297 # These are objects of optional features. They are always compiled, but
 298 # if the corresponding #defines are not set, they wind up empty and
 299 # are thrown away by the linker.
 300
 301 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 302 OBJ_WITH_OLD_DEMIME = demime.o
 303 OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o
 304
 305 # Targets for final binaries; the main one has a build number which is
 306 # updated each time. We don't bother with that for the auxiliaries.
 307
 308 OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
 309         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
 310         filtertest.o globals.o dkim.o \
 311         header.o host.o ip.o log.o lss.o match.o moan.o \
 312         os.o parse.o queue.o \
 313         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
 314         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
 315         store.o string.o tls.o tod.o transport.o tree.o verify.o \
 316         lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o \
 317         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
 318         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
 319
 320 exim:   lookups/lookups.a auths/auths.a pdkim/pdkim.a \
 321         routers/routers.a transports/transports.a \
 322         $(OBJ_EXIM) version.c
 323         @echo " "
 324         awk '{ print ($$1+1) }' cnumber.h > cnumber.temp
 325         rm -f cnumber.h; mv cnumber.temp cnumber.h
 326         @echo "$(CC) version.c"
 327         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) version.c
 328         rm -f exim
 329         @echo "$(LNCC) -o exim"
 330         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
 331           routers/routers.a transports/transports.a lookups/lookups.a \
 332           auths/auths.a pdkim/pdkim.a \
 333           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
 334           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
 335           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
 336         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 337           echo $(STRIP_COMMAND) exim; \
 338           $(STRIP_COMMAND) exim; \
 339         fi
 340         $(EXIM_CHMOD)
 341         @echo " "
 342         @echo ">>> exim binary built"
 343         @echo " "
 344
 345 # The utility for dumping the contents of an exim database
 346
 347 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
 348
 349 exim_dumpdb: $(OBJ_DUMPDB)
 350         @echo "$(LNCC) -o exim_dumpdb"
 351         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
 352           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 353         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 354           echo $(STRIP_COMMAND) exim_dumpdb; \
 355           $(STRIP_COMMAND) exim_dumpdb; \
 356         fi
 357         @echo ">>> exim_dumpdb utility built"
 358         @echo " "
 359
 360 # The utility for interrogating/fixing the contents of an exim database
 361
 362 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
 363
 364 exim_fixdb:  $(OBJ_FIXDB)
 365         @echo "$(LNCC) -o exim_fixdb"
 366         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
 367           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 368         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 369           echo $(STRIP_COMMAND) exim_fixdb; \
 370           $(STRIP_COMMAND) exim_fixdb; \
 371         fi
 372         @echo ">>> exim_fixdb utility built"
 373         @echo " "
 374
 375 # The utility for tidying the contents of an exim database
 376
 377 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
 378
 379 exim_tidydb: $(OBJ_TIDYDB)
 380         @echo "$(LNCC) -o exim_tidydb"
 381         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
 382           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 383         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 384           echo $(STRIP_COMMAND) exim_tidydb; \
 385           $(STRIP_COMMAND) exim_tidydb; \
 386         fi
 387         @echo ">>> exim_tidydb utility built"
 388         @echo " "
 389
 390 # The utility for building dbm files
 391
 392 exim_dbmbuild: exim_dbmbuild.o
 393         @echo "$(LNCC) -o exim_dbmbuild"
 394         $(FE)$(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
 395           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 396         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 397           echo $(STRIP_COMMAND) exim_dbmbuild; \
 398           $(STRIP_COMMAND) exim_dbmbuild; \
 399         fi
 400         @echo ">>> exim_dbmbuild utility built"
 401         @echo " "
 402
 403 # The utility for locking a mailbox while messing around with it
 404
 405 exim_lock: exim_lock.c
 406         @echo "$(CC) exim_lock.c"
 407         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
 408         @echo "$(LNCC) -o exim_lock"
 409         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
 410           $(LIBS) $(EXTRALIBS)
 411         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 412           echo $(STRIP_COMMAND) exim_lock; \
 413           $(STRIP_COMMAND) exim_lock; \
 414         fi
 415         @echo ">>> exim_lock utility built"
 416         @echo " "
 417
 418 # The X-based Exim monitor program's binary part. There's a macro for cutting
 419 # out the modified TextPop module, because some antique link editors cannot
 420 # handle the fact that it is redefining things that are found later in the
 421 # Xaw library.
 422
 423 # Object modules that are the unique Eximon modules
 424
 425 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
 426         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
 427         em_text.o em_xs.o
 428
 429 # The complete modules list also includes some specially compiled versions of
 430 # code from the main Exim source tree.
 431
 432 OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
 433
 434 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
 435             ../exim_monitor/em_version.c
 436         @echo "$(CC) exim_monitor/em_version.c"
 437         $(FE)$(CC) -o em_version.o -c \
 438           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
 439         @echo "$(LNCC) -o eximon.bin"
 440         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
 441         $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
 442           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
 443         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 444           echo $(STRIP_COMMAND) eximon.bin; \
 445           $(STRIP_COMMAND) eximon.bin; \
 446         fi
 447         @echo ">>> exim monitor binary built"
 448         @echo " "
 449
 450
 451 # Compile step for most of the exim modules. HDRS is a list of headers
 452 # which cause everthing to be rebuilt. PHDRS is the same, for the use
 453 # of routers, transports, and authenticators. I can't find a way of doing this
 454 # in one. This list is overkill, but it doesn't really take much time to
 455 # rebuild Exim on a modern computer.
 456
 457 HDRS  =    config.h    dbfunctions.h    dbstuff.h    exim.h    functions.h    globals.h    local_scan.h    macros.h    mytypes.h    structs.h
 458 PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../globals.h ../local_scan.h ../macros.h ../mytypes.h ../structs.h
 459
 460 .SUFFIXES: .o .c
 461 .c.o:;  @echo "$(CC) $*.c"
 462         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
 463
 464 # This is the dummy module for use by test compiles of individual modules. It
 465 # contains functions such as log_write() that may be called from bits of Exim
 466 # in the tested code.
 467
 468 dummies.o:       dummies.c
 469
 470 # Compile instructions for perl.o for when EXIM_PERL is set
 471
 472 perl.o:          $(HDRS) perl.c
 473         @echo "$(PERL_CC) perl.c"
 474         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
 475
 476 # Compile instructions for the database utility modules
 477
 478 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
 479         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
 480         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 481                                       -DCOMPILE_UTILITY \
 482                                       -DEXIM_DUMPDB \
 483                                       -o exim_dumpdb.o exim_dbutil.c
 484
 485 exim_fixdb.o:    $(HDRS) exim_dbutil.c
 486         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
 487         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 488                                       -DCOMPILE_UTILITY \
 489                                       -DEXIM_FIXDB \
 490                                       -o exim_fixdb.o exim_dbutil.c
 491
 492 exim_tidydb.o:   $(HDRS) exim_dbutil.c
 493         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
 494         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 495                                       -DCOMPILE_UTILITY \
 496                                       -DEXIM_TIDYDB \
 497                                       -o exim_tidydb.o exim_dbutil.c
 498
 499 # Compile instructions for exim_dbmbuild
 500
 501 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
 502         @echo "$(CC) exim_dbmbuild.c"
 503         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
 504
 505 # Utilities use special versions of some modules - typically with debugging
 506 # calls cut out.
 507
 508 util-spool_in.o: $(HDRS) spool_in.c
 509         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
 510         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
 511
 512 util-store.o:    $(HDRS) store.c
 513         @echo "$(CC) -DCOMPILE_UTILITY store.c"
 514         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
 515
 516 util-string.o:   $(HDRS) string.c
 517         @echo "$(CC) -DCOMPILE_UTILITY string.c"
 518         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
 519
 520 util-os.o:       $(HDRS) os.c
 521         @echo "$(CC) -DCOMPILE_UTILITY os.c"
 522         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 523                                       -DCOMPILE_UTILITY \
 524                                       -DOS_LOAD_AVERAGE \
 525                                       -DFIND_RUNNING_INTERFACES \
 526                                       -o util-os.o os.c
 527
 528 # The local scan module depends only on its own special header, and is compiled
 529 # from a source whose location is set by configuration.
 530
 531 local_scan.o:    Makefile config.h local_scan.h ../$(LOCAL_SCAN_SOURCE)
 532         @echo "$(CC) local_scan.c"
 533         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 534
 535 # Dependencies for the "ordinary" exim modules
 536
 537 acl.o:           $(HDRS) acl.c
 538 child.o:         $(HDRS) child.c
 539 crypt16.o:       $(HDRS) crypt16.c
 540 daemon.o:        $(HDRS) daemon.c
 541 dbfn.o:          $(HDRS) dbfn.c
 542 debug.o:         $(HDRS) debug.c
 543 deliver.o:       $(HDRS) deliver.c
 544 directory.o:     $(HDRS) directory.c
 545 dns.o:           $(HDRS) dns.c
 546 enq.o:           $(HDRS) enq.c
 547 exim.o:          $(HDRS) exim.c
 548 expand.o:        $(HDRS) expand.c
 549 filter.o:        $(HDRS) filter.c
 550 filtertest.o:    $(HDRS) filtertest.c
 551 globals.o:       $(HDRS) globals.c
 552 header.o:        $(HDRS) header.c
 553 host.o:          $(HDRS) host.c
 554 ip.o:            $(HDRS) ip.c
 555 log.o:           $(HDRS) log.c
 556 lss.o:           $(HDRS) lss.c
 557 match.o:         $(HDRS) match.c
 558 moan.o:          $(HDRS) moan.c
 559 os.o:            $(HDRS) os.c
 560 parse.o:         $(HDRS) parse.c
 561 queue.o:         $(HDRS) queue.c
 562 rda.o:           $(HDRS) rda.c
 563 readconf.o:      $(HDRS) readconf.c
 564 receive.o:       $(HDRS) receive.c
 565 retry.o:         $(HDRS) retry.c
 566 rewrite.o:       $(HDRS) rewrite.c
 567 rfc2047.o:       $(HDRS) rfc2047.c
 568 route.o:         $(HDRS) route.c
 569 search.o:        $(HDRS) search.c
 570 sieve.o:         $(HDRS) sieve.c
 571 smtp_in.o:       $(HDRS) smtp_in.c
 572 smtp_out.o:      $(HDRS) smtp_out.c
 573 spool_in.o:      $(HDRS) spool_in.c
 574 spool_out.o:     $(HDRS) spool_out.c
 575 store.o:         $(HDRS) store.c
 576 string.o:        $(HDRS) string.c
 577 tls.o:           $(HDRS) tls.c tls-gnu.c tls-openssl.c
 578 tod.o:           $(HDRS) tod.c
 579 transport.o:     $(HDRS) transport.c
 580 tree.o:          $(HDRS) tree.c
 581 verify.o:        $(HDRS) verify.c
 582 dkim.o:          $(HDRS) dkim.c
 583
 584 # Dependencies for WITH_CONTENT_SCAN modules
 585
 586 malware.o:       $(HDRS) malware.c
 587 mime.o:          $(HDRS) mime.c
 588 regex.o:         $(HDRS) regex.c
 589 spam.o:          $(HDRS) spam.c
 590 spool_mbox.o:    $(HDRS) spool_mbox.c
 591
 592
 593 # Dependencies for WITH_OLD_DEMIME modules
 594
 595 demime.o:        $(HDRS) demime.c
 596
 597
 598 # Dependencies for EXPERIMENTAL_* modules
 599
 600 bmi_spam.o:      $(HDRS) bmi_spam.c
 601 spf.o:           $(HDRS) spf.h spf.c
 602 srs.o:           $(HDRS) srs.h srs.c
 603 dcc.o:           $(HDRS) dcc.h dcc.c
 604
 605 # The module containing tables of available lookups, routers, auths, and
 606 # transports must be rebuilt if any of them are. However, because the makefiles
 607 # for the drivers are always run, we don't actually put the dependencies here,
 608 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
 609 # drtables.o even though the .a files haven't in fact been updated. Instead
 610 # it is arranged that the lower-level makefiles remove drtables.o when they
 611 # rebuild the .a files.
 612
 613 drtables.o:      $(HDRS) drtables.c
 614
 615
 616 # The exim monitor's private modules - the sources live in a private
 617 # subdirectory. The final binary combines the private modules with some
 618 # modules from the main exim binary.
 619
 620 em_StripChart.o: ../exim_monitor/em_StripChart.c
 621 em_TextPop.o:    ../exim_monitor/em_TextPop.c
 622 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
 623 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
 624 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
 625 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
 626 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
 627 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
 628 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
 629 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
 630 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
 631 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
 632 $(MONBIN): $(HDRS)
 633                  @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
 634                  $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
 635                    ../exim_monitor/`echo $@ | sed 's/o$$/c/'`
 636
 637
 638 # Targets for the various libraries that Exim uses.
 639
 640 # The lookups library.
 641
 642 buildlookups lookups/lookups.a: config.h
 643          @cd lookups; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 644            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" \
 645            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 646            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"; \
 647          echo " "
 648
 649 # The routers library.
 650
 651 buildrouters routers/routers.a: config.h
 652          @cd routers; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 653            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 654            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
 655          echo " "
 656
 657 # The transports library.
 658
 659 buildtransports transports/transports.a: config.h
 660          @cd transports; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 661            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 662            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
 663          echo " "
 664
 665 # The library of authorization modules
 666
 667 buildauths auths/auths.a: config.h
 668          @cd auths; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 669            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 670            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
 671          echo " "
 672
 673 # The PDKIM library
 674
 675 buildpdkim pdkim/pdkim.a: config.h
 676          @cd pdkim; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 677            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 678            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
 679          echo " "
 680
 681 # The "clean", "install", and "makefile" targets just pass themselves back to
 682 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
 683 # for them in the build directory.
 684
 685 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
 686
 687 # Targets for building stand-alone testing programs for basic testing of
 688 # some of the building blocks. These are not integrated with the makefile-
 689 # building targets. If you change something that is going to cause the
 690 # makefile to be rebuilt, you must run "make makefile" before running one
 691 # of these.
 692
 693 # The testing programs use different versions of some modules - usually
 694 # with bits cut out that are not relevant to the test in hand. For those
 695 # that are used by several tests, we use a different name.
 696
 697 sa-globals.o:    $(HDRS) globals.c
 698         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
 699
 700 sa-os.o:         $(HDRS) os.c
 701         $(CC) -c $(CFLAGS) $(INCLUDE) \
 702                                       -DFIND_RUNNING_INTERFACES \
 703                                       -o sa-os.o os.c
 704
 705 # These are the test targets themselves
 706
 707 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
 708                string.o tod.o version.o
 709         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
 710         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
 711           dummies.o sa-globals.o sa-os.o store.o string.o \
 712           tod.o version.o $(LIBS) $(DBMLIB)
 713         rm -f dbfn.o
 714
 715 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
 716                store.o string.o tod.o tree.o
 717         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
 718         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
 719         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
 720         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
 721         $(LNCC) -o test_host $(LFLAGS) \
 722           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
 723           tod.o tree.o $(LIBS) $(LIBRESOLV)
 724         rm -f child.o dummies.o host.o dns.o
 725
 726 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o
 727         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
 728         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
 729           sa-globals.o store.o string.o tod.o $(LIBS)
 730         rm -f os.o
 731
 732 test_parse:  config.h parse.c dummies.o sa-globals.o \
 733              store.o string.o tod.o version.o
 734         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
 735         $(LNCC) -o test_parse $(LFLAGS) parse.o \
 736           dummies.o sa-globals.o store.o string.o tod.o version.o
 737         rm -f parse.o
 738
 739 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o
 740         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
 741         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
 742           dummies.o sa-globals.o store.o tod.o $(LIBS)
 743         rm -f string.o
 744
 745 # End