| 1 | #! /bin/sh |
| 2 | # $Cambridge: exim/src/scripts/exim_install,v 1.1 2004/10/06 15:07:40 ph10 Exp $ |
| 3 | |
| 4 | # Script to install Exim binaries in BIN_DIRECTORY, which is defined in |
| 5 | # the local Makefile. It expects to be run in a build directory. It needs |
| 6 | # to be run as root in order to make exim setuid to root. If exim runs setuid |
| 7 | # to (e.g.) exim, this script should be run as that user or root. |
| 8 | |
| 9 | # This script also installs a default configuration file in CONFIGURE_FILE |
| 10 | # if there is no configuration file there, but only if CONFIGURE_FILE specifies |
| 11 | # single file. If it specifies a list, no action is taken. |
| 12 | |
| 13 | # If a default configuration file is installed, the existence of the system |
| 14 | # aliases file is tested. A default, containing only comments, is installed if |
| 15 | # necessary. |
| 16 | |
| 17 | # If INFO_DIRECTORY is defined in any of the local Makefiles, and the Exim doc |
| 18 | # directory contains the Texinfo documentation, this script also installs a |
| 19 | # the info files in INFO_DIRECTORY. |
| 20 | |
| 21 | # If DESTDIR is defined, all file paths are prefixed with ${DESTDIR}, with the |
| 22 | # sole exception of the reference to the system aliases file in the default |
| 23 | # configuration, because it is assumed that Exim is not actually going to be |
| 24 | # run from this position. For backward compatibility, if DESTDIR is not |
| 25 | # defined, ROOT is used instead. |
| 26 | |
| 27 | # The script can be made to output what it would do, without actually doing |
| 28 | # anything, by giving it the option "-n" (cf make). Arguments are the names |
| 29 | # of things to install. No arguments installs everything. |
| 30 | |
| 31 | do_chown=yes |
| 32 | do_symlink=yes |
| 33 | |
| 34 | while [ $# -gt 0 ] ; do |
| 35 | case "$1" in |
| 36 | -n) |
| 37 | real="true || " |
| 38 | ver="verification " |
| 39 | com=": " |
| 40 | echo $com "" |
| 41 | echo $com "*** Verification mode only: no commands will actually be obeyed" |
| 42 | echo $com "*** You can cut and paste the bits you want to a shell, etc" |
| 43 | echo $com "" |
| 44 | echo cd `pwd` |
| 45 | ;; |
| 46 | |
| 47 | -no_chown) |
| 48 | do_chown=no |
| 49 | ;; |
| 50 | |
| 51 | -no_symlink) |
| 52 | do_symlink=no |
| 53 | ;; |
| 54 | |
| 55 | *) |
| 56 | break |
| 57 | ;; |
| 58 | esac |
| 59 | shift |
| 60 | done |
| 61 | |
| 62 | # Get the values of BIN_DIRECTORY, CONFIGURE_FILE, INFO_DIRECTORY, NO_SYMLINK, |
| 63 | # SYSTEM_ALIASES_FILE, and EXE from the global Makefile (in the build |
| 64 | # directory). EXE is empty except in the Cygwin environment. In each case, keep |
| 65 | # the latest definition, thus respecting the Makefiles precedence. The sed |
| 66 | # sequences here are messy, but have to be very "basic" in order to work on |
| 67 | # Solaris, where the regular expressions in sed are primitive indeed. Modify at |
| 68 | # your peril. |
| 69 | |
| 70 | BIN_DIRECTORY=`sed -n -e '/^ *BIN_DIRECTORY *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` |
| 71 | CONFIGURE_FILE=`sed -n -e '/^ *CONFIGURE_FILE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` |
| 72 | INFO_DIRECTORY=`sed -n -e '/^ *INFO_DIRECTORY *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` |
| 73 | NO_SYMLINK=`sed -n -e '/^ *NO_SYMLINK *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` |
| 74 | SYSTEM_ALIASES_FILE=`sed -n -e '/^ *SYSTEM_ALIASES_FILE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` |
| 75 | EXE=`sed -n -e '/^ *EXE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile` |
| 76 | |
| 77 | # Set a default for SYSTEM_ALIASES_FILE |
| 78 | |
| 79 | if [ "${SYSTEM_ALIASES_FILE}" = "" ] ; then |
| 80 | SYSTEM_ALIASES_FILE=/etc/aliases |
| 81 | fi |
| 82 | |
| 83 | # Allow INST_xx to over-ride xx |
| 84 | case "$INST_BIN_DIRECTORY" in ?*) BIN_DIRECTORY="$INST_BIN_DIRECTORY";; esac |
| 85 | case "$INST_CONFIGURE_FILE" in ?*) CONFIGURE_FILE="$INST_CONFIGURE_FILE";; esac |
| 86 | case "$INST_INFO_DIRECTORY" in ?*) INFO_DIRECTORY="$INST_INFO_DIRECTORY";; esac |
| 87 | case "$INST_SYSTEM_ALIASES_FILE" in ?*) SYSTEM_ALIASES_FILE="$INST_SYSTEM_ALIASES_FILE";; esac |
| 88 | |
| 89 | case "$INST_UID" in '') INST_UID=root;; *) INST_UID="$INST_UID";; esac |
| 90 | case "$INST_CP" in '') CP=cp;; *) CP="$INST_CP";; esac |
| 91 | case "$INST_MV" in '') MV=mv;; *) MV="$INST_MV";; esac |
| 92 | case "$INST_LN" in '') LN=ln;; *) LN="$INST_LN";; esac |
| 93 | case "$INST_CHOWN" in '') CHOWN=chown;; *) CHOWN="$INST_CHOWN";; esac |
| 94 | case "$INST_CHMOD" in '') CHMOD=chmod;; *) CHMOD="$INST_CHMOD";; esac |
| 95 | case "$INST_DIRNAME" in '') DIRNAME=dirname;; *) DIRNAME="$INST_DIRNAME";; esac |
| 96 | case "$INST_MKDIR" in '') MKDIR=mkdir;; *) MKDIR="$INST_MKDIR";; esac |
| 97 | |
| 98 | # Allow the user to over-ride xx |
| 99 | case "$inst_dest" in ?*) BIN_DIRECTORY="$inst_dest";; esac |
| 100 | case "$inst_conf" in ?*) CONFIGURE_FILE="$inst_conf";; esac |
| 101 | case "$inst_info" in ?*) INFO_DIRECTORY="$inst_info";; esac |
| 102 | case "$inst_aliases" in ?*) SYSTEM_ALIASES_FILE="$inst_aliases";; esac |
| 103 | |
| 104 | # Insert ${DESTDIR} at the start of all paths so that the whole thing can be |
| 105 | # installed under a different file root. For backwards compatibility, use |
| 106 | # ${ROOT} if ${DESTDIR} is not set. However, we need to save the value of |
| 107 | # the real system aliases file, and use that in the default configuration. |
| 108 | |
| 109 | ACTUAL_SYSTEM_ALIASES_FILE=${SYSTEM_ALIASES_FILE} |
| 110 | DESTDIR=${DESTDIR:-${ROOT}} |
| 111 | |
| 112 | BIN_DIRECTORY=${DESTDIR}${BIN_DIRECTORY} |
| 113 | CONFIGURE_FILE=${DESTDIR}${CONFIGURE_FILE} |
| 114 | SYSTEM_ALIASES_FILE=${DESTDIR}${SYSTEM_ALIASES_FILE} |
| 115 | |
| 116 | if [ "${INFO_DIRECTORY}" != "" ] ; then |
| 117 | INFO_DIRECTORY=${DESTDIR}${INFO_DIRECTORY} |
| 118 | fi |
| 119 | |
| 120 | # Overrides of other things |
| 121 | case "$inst_uid" in ?*) INST_UID="$inst_uid";; esac |
| 122 | case "$inst_cp" in ?*) CP="$inst_cp";; esac |
| 123 | case "$inst_mv" in ?*) MV="$inst_mv";; esac |
| 124 | case "$inst_ln" in ?*) LN="$inst_ln";; esac |
| 125 | case "$inst_chown" in ?*) CHOWN="$inst_chown";; esac |
| 126 | case "$inst_chmod" in ?*) CHMOD="$inst_chmod";; esac |
| 127 | case "$inst_dirname" in ?*) DIRNAME="$inst_dirname";; esac |
| 128 | case "$inst_mkdir" in ?*) MKDIR="$inst_mkdir";; esac |
| 129 | |
| 130 | # chown is a special case; in at least one OS it is in /usr/etc instead |
| 131 | # of in /usr/bin, and therefore not likely to be on the path. Another OS |
| 132 | # has it in /usr/sbin. This fudge tries to cope with these variations. |
| 133 | |
| 134 | # Otherwise, and for other commands, we assume that the normal PATH will |
| 135 | # give access to where they are on your operating system (normally /usr/bin |
| 136 | # or /bin). |
| 137 | |
| 138 | if [ "${CHOWN}" = "chown" -a -x /usr/sbin/chown ] ; then |
| 139 | CHOWN=/usr/sbin/chown |
| 140 | fi |
| 141 | |
| 142 | if [ "${CHOWN}" = "chown" -a ! -f /usr/bin/chown -a -f /usr/etc/chown ] ; then |
| 143 | CHOWN=/usr/etc/chown |
| 144 | fi |
| 145 | |
| 146 | # See if the exim monitor has been built |
| 147 | |
| 148 | if [ -f eximon -a -f eximon.bin ]; then |
| 149 | exim_monitor="eximon eximon.bin" |
| 150 | fi |
| 151 | |
| 152 | # If bin directory doesn't exist, try to create it |
| 153 | |
| 154 | if [ ! -d "${BIN_DIRECTORY}" ]; then |
| 155 | echo mkdir -p ${BIN_DIRECTORY} |
| 156 | ${real} mkdir -p ${BIN_DIRECTORY} |
| 157 | if [ $? -ne 0 ]; then |
| 158 | echo $com "" |
| 159 | echo $com "*** Exim installation ${ver}failed ***" |
| 160 | exit 1 |
| 161 | else |
| 162 | ${real} echo $com ${BIN_DIRECTORY} created |
| 163 | fi |
| 164 | fi |
| 165 | |
| 166 | # If no arguments, install everything |
| 167 | |
| 168 | if [ $# -gt 0 ]; then |
| 169 | set $@ |
| 170 | else |
| 171 | set exim${EXE} ${exim_monitor} exim_dumpdb${EXE} exim_fixdb${EXE} \ |
| 172 | exim_tidydb${EXE} exinext exiwhat exim_dbmbuild${EXE} exicyclog \ |
| 173 | exigrep eximstats exipick exiqgrep exiqsumm exim_lock${EXE} \ |
| 174 | exim_checkaccess |
| 175 | fi |
| 176 | |
| 177 | echo $com "" |
| 178 | echo $com Installation directory is ${BIN_DIRECTORY} |
| 179 | echo $com "" |
| 180 | |
| 181 | while [ $# -gt 0 ]; do |
| 182 | name=$1 |
| 183 | shift |
| 184 | |
| 185 | if [ ! -s ${name} ]; then |
| 186 | echo $com "" |
| 187 | echo $com "*** `pwd`/${name} does not exist or is empty" |
| 188 | echo $com "*** Have you built Exim successfully?" |
| 189 | echo $com "*** Exim installation ${ver}failed ***" |
| 190 | exit 1 |
| 191 | fi |
| 192 | |
| 193 | # The exim binary is handled specially |
| 194 | |
| 195 | if [ $name = exim${EXE} ]; then |
| 196 | version=exim-`./exim -bV -C /dev/null | \ |
| 197 | awk '/Exim version/ { OFS=""; print $3,"-",substr($4,2,length($4)-1) }'`${EXE} |
| 198 | |
| 199 | if [ "${version}" = "exim-${EXE}" ]; then |
| 200 | echo $com "" |
| 201 | echo $com "*** Could not run ./exim to find version number ***" |
| 202 | echo $com "*** Exim installation ${ver}failed ***" |
| 203 | exit 1 |
| 204 | fi |
| 205 | |
| 206 | # Do something only if newer than existing file, or no existing file |
| 207 | |
| 208 | if ../scripts/newer ${name} ${BIN_DIRECTORY}/${version}; then |
| 209 | echo ${CP} ${name} ${BIN_DIRECTORY}/${version} |
| 210 | ${real} ${CP} ${name} ${BIN_DIRECTORY}/${version} |
| 211 | if [ $? -ne 0 ]; then |
| 212 | echo $com "" |
| 213 | echo $com "*** Exim installation ${ver}failed ***" |
| 214 | exit 1 |
| 215 | fi |
| 216 | |
| 217 | # After copy, set ownership and permissions, unless disabled |
| 218 | |
| 219 | if [ "$do_chown" != "no" ]; then |
| 220 | echo ${CHOWN} ${INST_UID} ${BIN_DIRECTORY}/${version} |
| 221 | ${real} ${CHOWN} ${INST_UID} ${BIN_DIRECTORY}/${version} |
| 222 | if [ $? -ne 0 ]; then |
| 223 | echo $com "" |
| 224 | echo $com "*** You must be ${INST_UID} to install exim ***" |
| 225 | exit 1 |
| 226 | fi |
| 227 | echo ${CHMOD} a+x ${BIN_DIRECTORY}/${version} |
| 228 | ${real} ${CHMOD} a+x ${BIN_DIRECTORY}/${version} |
| 229 | if [ $? -ne 0 ]; then |
| 230 | echo $com "" |
| 231 | echo $com "*** Exim installation ${ver}failed ***" |
| 232 | exit 1 |
| 233 | fi |
| 234 | echo ${CHMOD} u+s ${BIN_DIRECTORY}/${version} |
| 235 | ${real} ${CHMOD} u+s ${BIN_DIRECTORY}/${version} |
| 236 | if [ $? -ne 0 ]; then |
| 237 | echo $com "" |
| 238 | echo $com "*** Exim installation ${ver}failed ***" |
| 239 | exit 1 |
| 240 | fi |
| 241 | else |
| 242 | echo $com "$CHOWN $INST_UID omitted: -no_chown was specified" |
| 243 | echo $com "$CHMOD u+s omitted: -no_chown was specified" |
| 244 | fi |
| 245 | |
| 246 | # Now sort out the "exim" alias, unless NO_SYMLINK is set. |
| 247 | |
| 248 | if [ "X$NO_SYMLINK" = "X" ] && [ "$do_symlink" != "no" ] ; then |
| 249 | |
| 250 | # First check whether "exim" exists in the directory. |
| 251 | if [ -f ${BIN_DIRECTORY}/exim ]; then |
| 252 | |
| 253 | # If it's not a symbolic link, make a copy with the old version number |
| 254 | if [ `ls -l ${BIN_DIRECTORY}/exim | cut -c1-1` != 'l' ]; then |
| 255 | oldversion=exim-`${BIN_DIRECTORY}/exim -bV -C /dev/null | \ |
| 256 | awk '/Exim version/ { OFS=""; print $3,"-",substr($4,2,length($4)-1) }'`${EXE} |
| 257 | if [ "${version}" = "${oldversion}" ] ; then |
| 258 | echo $com "" |
| 259 | echo $com "*** Existing file called exim has the same version and compile number ***" |
| 260 | echo $com "*** Exim installation ${ver}failed ***" |
| 261 | exit 1 |
| 262 | fi |
| 263 | echo ${CP} ${BIN_DIRECTORY}/exim ${BIN_DIRECTORY}/${oldversion} |
| 264 | ${real} ${CP} ${BIN_DIRECTORY}/exim ${BIN_DIRECTORY}/${oldversion} |
| 265 | if [ $? -ne 0 ]; then |
| 266 | echo $com "" |
| 267 | echo $com "*** Exim installation ${ver}failed ***" |
| 268 | exit 1 |
| 269 | fi |
| 270 | fi |
| 271 | |
| 272 | # Now we can move the name "exim" to be a symbolic link to the new |
| 273 | # version, atomically. |
| 274 | |
| 275 | echo \(cd ${BIN_DIRECTORY}\; ${LN} -s ${version} temporary_exim\) |
| 276 | (${real} cd ${BIN_DIRECTORY}; ${real} ${LN} -s ${version} temporary_exim) |
| 277 | if [ $? -ne 0 ]; then |
| 278 | echo $com "" |
| 279 | echo $com "*** Exim installation ${ver}failed ***" |
| 280 | exit 1 |
| 281 | fi |
| 282 | |
| 283 | echo ${MV} -f ${BIN_DIRECTORY}/temporary_exim ${BIN_DIRECTORY}/exim |
| 284 | ${real} ${MV} -f ${BIN_DIRECTORY}/temporary_exim ${BIN_DIRECTORY}/exim |
| 285 | if [ $? -ne 0 ]; then |
| 286 | echo $com "" |
| 287 | echo $com "*** Exim installation ${ver}failed ***" |
| 288 | exit 1 |
| 289 | fi |
| 290 | |
| 291 | # If "exim" does not already exist just create a symbolic link. |
| 292 | |
| 293 | else |
| 294 | echo \(cd ${BIN_DIRECTORY}\; ${LN} -s ${version} exim\) |
| 295 | (${real} cd ${BIN_DIRECTORY}; ${real} ${LN} -s ${version} exim) |
| 296 | if [ $? -ne 0 ]; then |
| 297 | echo $com "" |
| 298 | echo $com "*** Exim installation ${ver}failed ***" |
| 299 | exit 1 |
| 300 | fi |
| 301 | fi |
| 302 | |
| 303 | else |
| 304 | echo $com "creation of symlink omitted" |
| 305 | if [ "X$NO_SYMLINK" != "X" ] ; then |
| 306 | echo $com "(NO_SYMLINK is specified in Local/Makefile)" |
| 307 | else |
| 308 | echo $com "(-no_symlink was specified)" |
| 309 | fi |
| 310 | fi |
| 311 | |
| 312 | # New binary is not newer than the installed file |
| 313 | |
| 314 | else |
| 315 | echo $com ${name} is not newer than ${BIN_DIRECTORY}/${version} |
| 316 | fi |
| 317 | |
| 318 | # Handle everything other than the exim binary itself |
| 319 | |
| 320 | else |
| 321 | if ../scripts/newer ${name} ${BIN_DIRECTORY}/${name}; then |
| 322 | if [ -f ${BIN_DIRECTORY}/${name} ]; then |
| 323 | echo ${CP} ${BIN_DIRECTORY}/${name} ${BIN_DIRECTORY}/${name}.O |
| 324 | ${real} ${CP} ${BIN_DIRECTORY}/${name} ${BIN_DIRECTORY}/${name}.O |
| 325 | if [ $? -ne 0 ]; then |
| 326 | echo $com "" |
| 327 | echo $com "*** Exim installation ${ver}failed ***" |
| 328 | exit 1 |
| 329 | fi |
| 330 | fi |
| 331 | echo ${CP} ${name} ${BIN_DIRECTORY} |
| 332 | ${real} ${CP} ${name} ${BIN_DIRECTORY} |
| 333 | if [ $? -ne 0 ]; then |
| 334 | echo $com "" |
| 335 | echo $com "*** Exim installation ${ver}failed ***" |
| 336 | exit 1 |
| 337 | fi |
| 338 | else |
| 339 | echo $com ${name} is not newer than ${BIN_DIRECTORY}/${name} |
| 340 | fi |
| 341 | fi |
| 342 | |
| 343 | done |
| 344 | |
| 345 | |
| 346 | |
| 347 | # If there is no configuration file, install the default, modifying it to refer |
| 348 | # to the configured system aliases file. If there is no setting for |
| 349 | # SYSTEM_ALIASES_FILE, use the traditional /etc/aliases. If the file does not |
| 350 | # exist, install a default (dummy) for that too. |
| 351 | |
| 352 | # However, if CONFIGURE_FILE specifies a list of files, skip this code. |
| 353 | |
| 354 | echo $com "" |
| 355 | |
| 356 | if [ `expr "${CONFIGURE_FILE}" : ".*:"` -ne 0 ] ; then |
| 357 | echo $com Runtime configuration is specified as the following list: |
| 358 | echo $com ' ' ${CONFIGURE_FILE} |
| 359 | echo $com Therefore, skipping automatic installation. |
| 360 | |
| 361 | elif [ ! -f ${CONFIGURE_FILE} ]; then |
| 362 | echo $com Installing default configuration in ${CONFIGURE_FILE} |
| 363 | echo $com because there is no existing configuration file. |
| 364 | if [ "${SYSTEM_ALIASES_FILE}" = "" ] ; then |
| 365 | SYSTEM_ALIASES_FILE=/etc/aliases |
| 366 | echo $com This configuration has system aliases in ${SYSTEM_ALIASES_FILE}. |
| 367 | fi |
| 368 | |
| 369 | echo ${MKDIR} -p `${DIRNAME} ${CONFIGURE_FILE}` |
| 370 | ${real} ${MKDIR} -p `${DIRNAME} ${CONFIGURE_FILE}` |
| 371 | |
| 372 | echo sed -e '\\' |
| 373 | echo " \"/SYSTEM_ALIASES_FILE/ s'SYSTEM_ALIASES_FILE'${ACTUAL_SYSTEM_ALIASES_FILE}'\"" '\\' |
| 374 | echo " ../src/configure.default > \${CONFIGURE_FILE}" |
| 375 | |
| 376 | # I can't find a way of writing this using the ${real} feature because |
| 377 | # it seems that the output redirection always happens, even when -n was |
| 378 | # specified. So control it the hard way. |
| 379 | |
| 380 | if [ "$real" = "" ] ; then |
| 381 | sed -e \ |
| 382 | "/SYSTEM_ALIASES_FILE/ s'SYSTEM_ALIASES_FILE'${ACTUAL_SYSTEM_ALIASES_FILE}'" \ |
| 383 | ../src/configure.default > ${CONFIGURE_FILE} |
| 384 | else |
| 385 | true |
| 386 | fi |
| 387 | |
| 388 | if [ $? -ne 0 ]; then |
| 389 | echo $com "" |
| 390 | echo $com "*** Exim installation ${ver}failed ***" |
| 391 | exit 1 |
| 392 | fi |
| 393 | if [ ! -f ${SYSTEM_ALIASES_FILE} ]; then |
| 394 | echo $com '****' |
| 395 | echo $com Installing a dummy ${SYSTEM_ALIASES_FILE} file because you do not have |
| 396 | echo $com one, and the default configuration requires it. You should |
| 397 | echo $com edit ${SYSTEM_ALIASES_FILE} and at least create an alias for postmaster. |
| 398 | echo $com '***' |
| 399 | echo ${CP} ../src/aliases.default ${SYSTEM_ALIASES_FILE} |
| 400 | ${real} ${CP} ../src/aliases.default ${SYSTEM_ALIASES_FILE} |
| 401 | fi |
| 402 | |
| 403 | else |
| 404 | echo $com Configuration file ${CONFIGURE_FILE} already exists |
| 405 | fi |
| 406 | |
| 407 | # Install info files if the directory is defined and the Texinfo |
| 408 | # source documentation is present. |
| 409 | |
| 410 | if [ "${INFO_DIRECTORY}" != "" -a -f ../doc/spec.texinfo ] ; then |
| 411 | echo $com "" |
| 412 | if [ ! -d "${INFO_DIRECTORY}" ] ; then |
| 413 | echo mkdir -p ${INFO_DIRECTORY} |
| 414 | ${real} mkdir -p ${INFO_DIRECTORY} |
| 415 | if [ $? -ne 0 ]; then |
| 416 | echo $com "" |
| 417 | echo $com "*** Exim installation ${ver}failed ***" |
| 418 | exit 1 |
| 419 | else |
| 420 | echo $com ${INFO_DIRECTORY} created |
| 421 | fi |
| 422 | fi |
| 423 | |
| 424 | echo $com Info installation directory is ${INFO_DIRECTORY} |
| 425 | echo $com "" |
| 426 | |
| 427 | ${real} makeinfo --no-split --output exim.info ../doc/spec.texinfo |
| 428 | echo ${CP} exim.info ${INFO_DIRECTORY} |
| 429 | ${real} ${CP} exim.info ${INFO_DIRECTORY} |
| 430 | ${real} install-info --section="Exim" \ |
| 431 | --entry "* User guide: (exim). Exim manual" \ |
| 432 | ${INFO_DIRECTORY}/exim.info ${INFO_DIRECTORY}/dir |
| 433 | ${real} makeinfo --no-split --output exim_filter.info ../doc/filter.texinfo |
| 434 | echo ${CP} exim_filter.info ${INFO_DIRECTORY} |
| 435 | ${real} ${CP} exim_filter.info ${INFO_DIRECTORY} |
| 436 | ${real} install-info --section="Exim" \ |
| 437 | --entry "* Filtering: (exim_filter). Filtering mail with Exim" \ |
| 438 | ${INFO_DIRECTORY}/exim_filter.info ${INFO_DIRECTORY}/dir |
| 439 | fi |
| 440 | |
| 441 | # Everything OK |
| 442 | |
| 443 | echo $com "" |
| 444 | echo $com Exim installation ${ver}complete |
| 445 | |
| 446 | # End of exim_install |