Early-pipe: invalidate cache on a failure of required-auth
[exim.git] / test / runtest
CommitLineData
b057ad11
HSHR
1#! /usr/bin/env perl
2# We use env, because in some environments of our build farm
3# the Perl 5.010 interpreter is only reachable via $PATH
151b83f8 4
151b83f8
PH
5###############################################################################
6# This is the controlling script for the "new" test suite for Exim. It should #
7# be possible to export this suite for running on a wide variety of hosts, in #
8# contrast to the old suite, which was very dependent on the environment of #
9# Philip Hazel's desktop computer. This implementation inspects the version #
10# of Exim that it finds, and tests only those features that are included. The #
11# surrounding environment is also tested to discover what is available. See #
12# the README file for details of how it all works. #
13# #
14# Implementation started: 03 August 2005 by Philip Hazel #
15# Placed in the Exim CVS: 06 February 2006 #
16###############################################################################
17
3ff2360f 18#use strict;
4d8393c0 19use v5.10.1;
b057ad11 20use warnings;
4d8393c0 21use if $^V >= v5.19.11, experimental => 'smartmatch';
b057ad11 22
151b83f8
PH
23use Errno;
24use FileHandle;
25use Socket;
f675bf30 26use Time::Local;
28e8a0f7
HSHR
27use Cwd;
28use File::Basename;
ffe0a357
HSHR
29use Pod::Usage;
30use Getopt::Long;
9a8a6839 31use FindBin qw'$RealBin';
1f187290 32
9a8a6839 33use lib "$RealBin/lib";
1f187290 34use Exim::Runtest;
4d8393c0 35use Exim::Utils qw(uniq numerically);
1f187290 36
4d8393c0
HSHR
37use if $ENV{DEBUG} && scalar($ENV{DEBUG} =~ /\bruntest\b/) => 'Smart::Comments' => '####';
38use if $ENV{DEBUG} && scalar($ENV{DEBUG} =~ /\bruntest\b/) => 'Data::Dumper';
151b83f8 39
9b25e4a9
HSHR
40use constant TEST_TOP => 8999;
41use constant TEST_SPECIAL_TOP => 9999;
42
151b83f8
PH
43
44# Start by initializing some global variables
45
9a8a6839 46chomp(my $testversion = `git describe --always --dirty 2>&1` || '<unknown>');
151b83f8 47
83e2f8a2
PP
48# This gets embedded in the D-H params filename, and the value comes
49# from asking GnuTLS for "normal", but there appears to be no way to
50# use certtool/... to ask what that value currently is. *sigh*
9d26b8c0
PP
51# We also clamp it because of NSS interop, see addition of tls_dh_max_bits.
52# This value is correct as of GnuTLS 2.12.18 as clamped by tls_dh_max_bits.
53# normal = 2432 tls_dh_max_bits = 2236
9a8a6839 54my $gnutls_dh_bits_normal = 2236;
83e2f8a2 55
9a8a6839
HSHR
56my $cf = 'bin/cf -exact';
57my $cr = "\r";
58my $debug = 0;
59my $flavour = do {
c1395714 60 my $f = Exim::Runtest::flavour() // '';
6336058c
HSHR
61 (grep { $f eq $_ } Exim::Runtest::flavours()) ? $f : 'FOO';
62};
9a8a6839
HSHR
63my $force_continue = 0;
64my $force_update = 0;
65my $log_failed_filename = 'failed-summary.log';
a4ecb6a7 66my $log_summary_filename = 'run-summary.log';
a31c0dcd 67my @more = qw'less -XF';
9a8a6839
HSHR
68my $optargs = '';
69my $save_output = 0;
70my $server_opts = '';
1a13c13c 71my $slow = 0;
9a8a6839
HSHR
72my $valgrind = 0;
73
74my $have_ipv4 = 1;
75my $have_ipv6 = 1;
76my $have_largefiles = 0;
77
9a8a6839 78my @test_list = ();
151b83f8
PH
79
80
81# Networks to use for DNS tests. We need to choose some networks that will
82# never be used so that there is no chance that the host on which we are
83# running is actually in one of the test networks. Private networks such as
84# the IPv4 10.0.0.0/8 network are no good because hosts may well use them.
85# Rather than use some unassigned numbers (that might become assigned later),
86# I have chosen some multicast networks, in the belief that such addresses
87# won't ever be assigned to hosts. This is the only place where these numbers
88# are defined, so it is trivially possible to change them should that ever
89# become necessary.
90
9a8a6839
HSHR
91my $parm_ipv4_test_net = 224;
92my $parm_ipv6_test_net = 'ff00';
151b83f8
PH
93
94# Port numbers are currently hard-wired
95
9a8a6839
HSHR
96my $parm_port_n = 1223; # Nothing listening on this port
97my $parm_port_s = 1224; # Used for the "server" command
98my $parm_port_d = 1225; # Used for the Exim daemon
99my $parm_port_d2 = 1226; # Additional for daemon
100my $parm_port_d3 = 1227; # Additional for daemon
101my $parm_port_d4 = 1228; # Additional for daemon
df613eb4 102my $dynamic_socket; # allocated later for PORT_DYNAMIC
151b83f8 103
1f187290
HSHR
104# Find a suiteable group name for test (currently only 0001
105# uses a group name. A numeric group id would do
106my $parm_mailgroup = Exim::Runtest::mailgroup('mail');
107
df88d501 108# Manually set locale
d63a9563 109$ENV{LC_ALL} = 'C';
df88d501 110
9a8a6839
HSHR
111# In some environments USER does not exist, but we need it for some test(s)
112$ENV{USER} = getpwuid($>) if not exists $ENV{USER};
151b83f8 113
d63a9563 114my ($parm_configure_owner, $parm_configure_group);
40e3c5bf 115my ($parm_ipv4, $parm_ipv6, $parm_ipv6_stripped);
d63a9563 116my $parm_hostname;
151b83f8
PH
117
118###############################################################################
119###############################################################################
120
121# Define a number of subroutines
122
123###############################################################################
124###############################################################################
125
126
127##################################################
128# Handle signals #
129##################################################
130
131sub pipehandler { $sigpipehappened = 1; }
132
133sub inthandler { print "\n"; tests_exit(-1, "Caught SIGINT"); }
134
135
136##################################################
137# Do global macro substitutions #
138##################################################
139
140# This function is applied to configurations, command lines and data lines in
141# scripts, and to lines in the files of the aux-var-src and the dnszones-src
142# directory. It takes one argument: the current test number, or zero when
143# setting up files before running any tests.
144
145sub do_substitute{
146s?\bCALLER\b?$parm_caller?g;
1b781f48 147s?\bCALLERGROUP\b?$parm_caller_group?g;
151b83f8
PH
148s?\bCALLER_UID\b?$parm_caller_uid?g;
149s?\bCALLER_GID\b?$parm_caller_gid?g;
150s?\bCLAMSOCKET\b?$parm_clamsocket?g;
151s?\bDIR/?$parm_cwd/?g;
152s?\bEXIMGROUP\b?$parm_eximgroup?g;
153s?\bEXIMUSER\b?$parm_eximuser?g;
154s?\bHOSTIPV4\b?$parm_ipv4?g;
155s?\bHOSTIPV6\b?$parm_ipv6?g;
156s?\bHOSTNAME\b?$parm_hostname?g;
157s?\bPORT_D\b?$parm_port_d?g;
158s?\bPORT_D2\b?$parm_port_d2?g;
159s?\bPORT_D3\b?$parm_port_d3?g;
160s?\bPORT_D4\b?$parm_port_d4?g;
161s?\bPORT_N\b?$parm_port_n?g;
162s?\bPORT_S\b?$parm_port_s?g;
163s?\bTESTNUM\b?$_[0]?g;
164s?(\b|_)V4NET([\._])?$1$parm_ipv4_test_net$2?g;
165s?\bV6NET:?$parm_ipv6_test_net:?g;
df613eb4 166s?\bPORT_DYNAMIC\b?$dynamic_socket->sockport()?eg;
1f187290 167s?\bMAILGROUP\b?$parm_mailgroup?g;
151b83f8
PH
168}
169
170
1ca9f507
PP
171##################################################
172# Any state to be preserved across tests #
173##################################################
174
175my $TEST_STATE = {};
176
151b83f8
PH
177
178##################################################
179# Subroutine to tidy up and exit #
180##################################################
181
182# In all cases, we check for any Exim daemons that have been left running, and
183# kill them. Then remove all the spool data, test output, and the modified Exim
184# binary if we are ending normally.
185
186# Arguments:
187# $_[0] = 0 for a normal exit; full cleanup done
188# $_[0] > 0 for an error exit; no files cleaned up
189# $_[0] < 0 for a "die" exit; $_[1] contains a message
190
191sub tests_exit{
192my($rc) = $_[0];
193my($spool);
194
195# Search for daemon pid files and kill the daemons. We kill with SIGINT rather
196# than SIGTERM to stop it outputting "Terminated" to the terminal when not in
197# the background.
198
1ca9f507
PP
199if (exists $TEST_STATE->{exim_pid})
200 {
201 $pid = $TEST_STATE->{exim_pid};
202 print "Tidyup: killing wait-mode daemon pid=$pid\n";
ee15e974 203 system("sudo kill -INT $pid");
1ca9f507
PP
204 }
205
151b83f8
PH
206if (opendir(DIR, "spool"))
207 {
208 my(@spools) = sort readdir(DIR);
209 closedir(DIR);
210 foreach $spool (@spools)
211 {
212 next if $spool !~ /^exim-daemon./;
213 open(PID, "spool/$spool") || die "** Failed to open \"spool/$spool\": $!\n";
214 chomp($pid = <PID>);
215 close(PID);
216 print "Tidyup: killing daemon pid=$pid\n";
ee15e974 217 system("sudo rm -f spool/$spool; sudo kill -INT $pid");
151b83f8
PH
218 }
219 }
220else
221 { die "** Failed to opendir(\"spool\"): $!\n" unless $!{ENOENT}; }
222
223# Close the terminal input and remove the test files if all went well, unless
224# the option to save them is set. Always remove the patched Exim binary. Then
225# exit normally, or die.
226
227close(T);
228system("sudo /bin/rm -rf ./spool test-* ./dnszones/*")
229 if ($rc == 0 && !$save_output);
230
b3e39dd7
TL
231system("sudo /bin/rm -rf ./eximdir/*")
232 if (!$save_output);
6bf5d8f2
PP
233
234print "\nYou were in test $test at the end there.\n\n" if defined $test;
151b83f8
PH
235exit $rc if ($rc >= 0);
236die "** runtest error: $_[1]\n";
237}
238
239
240
241##################################################
242# Subroutines used by the munging subroutine #
243##################################################
244
245# This function is used for things like message ids, where we want to generate
246# more than one value, but keep a consistent mapping throughout.
247#
248# Arguments:
249# $oldid the value from the file
250# $base a base string into which we insert a sequence
251# $sequence the address of the current sequence counter
252
253sub new_value {
254my($oldid, $base, $sequence) = @_;
255my($newid) = $cache{$oldid};
256if (! defined $newid)
257 {
258 $newid = sprintf($base, $$sequence++);
259 $cache{$oldid} = $newid;
260 }
261return $newid;
262}
263
264
f675bf30
JH
265# This is used while munging the output from exim_dumpdb.
266# May go wrong across DST changes.
151b83f8
PH
267
268sub date_seconds {
269my($day,$month,$year,$hour,$min,$sec) =
270 $_[0] =~ /^(\d\d)-(\w\w\w)-(\d{4})\s(\d\d):(\d\d):(\d\d)/;
f675bf30
JH
271my($mon);
272if ($month =~ /Jan/) {$mon = 0;}
273elsif($month =~ /Feb/) {$mon = 1;}
274elsif($month =~ /Mar/) {$mon = 2;}
275elsif($month =~ /Apr/) {$mon = 3;}
276elsif($month =~ /May/) {$mon = 4;}
277elsif($month =~ /Jun/) {$mon = 5;}
278elsif($month =~ /Jul/) {$mon = 6;}
279elsif($month =~ /Aug/) {$mon = 7;}
280elsif($month =~ /Sep/) {$mon = 8;}
281elsif($month =~ /Oct/) {$mon = 9;}
282elsif($month =~ /Nov/) {$mon = 10;}
283elsif($month =~ /Dec/) {$mon = 11;}
284return timelocal($sec,$min,$hour,$day,$mon,$year);
151b83f8
PH
285}
286
287
288# This is a subroutine to sort maildir files into time-order. The second field
289# is the microsecond field, and may vary in length, so must be compared
290# numerically.
291
292sub maildirsort {
293return $a cmp $b if ($a !~ /^\d+\.H\d/ || $b !~ /^\d+\.H\d/);
294my($x1,$y1) = $a =~ /^(\d+)\.H(\d+)/;
295my($x2,$y2) = $b =~ /^(\d+)\.H(\d+)/;
296return ($x1 != $x2)? ($x1 <=> $x2) : ($y1 <=> $y2);
297}
298
299
300
301##################################################
302# Subroutine list files below a directory #
303##################################################
304
305# This is used to build up a list of expected mail files below a certain path
306# in the directory tree. It has to be recursive in order to deal with multiple
307# maildir mailboxes.
308
309sub list_files_below {
310my($dir) = $_[0];
311my(@yield) = ();
312my(@sublist, $file);
313
314opendir(DIR, $dir) || tests_exit(-1, "Failed to open $dir: $!");
315@sublist = sort maildirsort readdir(DIR);
316closedir(DIR);
317
318foreach $file (@sublist)
319 {
320 next if $file eq "." || $file eq ".." || $file eq "CVS";
321 if (-d "$dir/$file")
322 { @yield = (@yield, list_files_below("$dir/$file")); }
323 else
324 { push @yield, "$dir/$file"; }
325 }
326
327return @yield;
328}
329
330
331
332##################################################
333# Munge a file before comparing #
334##################################################
335
336# The pre-processing turns all dates, times, Exim versions, message ids, and so
337# on into standard values, so that the compare works. Perl's substitution with
338# an expression provides a neat way to do some of these changes.
339
340# We keep a global associative array for repeatedly turning the same values
341# into the same standard values throughout the data from a single test.
342# Message ids get this treatment (can't be made reliable for times), and
343# times in dumped retry databases are also handled in a special way, as are
344# incoming port numbers.
345
346# On entry to the subroutine, the file to write to is already opened with the
347# name MUNGED. The input file name is the only argument to the subroutine.
348# Certain actions are taken only when the name contains "stderr", "stdout",
349# or "log". The yield of the function is 1 if a line matching "*** truncated
350# ***" is encountered; otherwise it is 0.
351
352sub munge {
353my($file) = $_[0];
c9a55f6a 354my($extra) = $_[1];
151b83f8
PH
355my($yield) = 0;
356my(@saved) = ();
357
2f8e6f30
HSHR
358local $_;
359
151b83f8
PH
360open(IN, "$file") || tests_exit(-1, "Failed to open $file: $!");
361
362my($is_log) = $file =~ /log/;
363my($is_stdout) = $file =~ /stdout/;
364my($is_stderr) = $file =~ /stderr/;
87cb4a16 365my($is_mail) = $file =~ /mail/;
151b83f8
PH
366
367# Date pattern
368
369$date = "\\d{2}-\\w{3}-\\d{4}\\s\\d{2}:\\d{2}:\\d{2}";
370
371# Pattern for matching pids at start of stderr lines; initially something
372# that won't match.
373
374$spid = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx";
375
376# Scan the file and make the changes. Near the bottom there are some changes
377# that are specific to certain file types, though there are also some of those
378# inline too.
379
bc3c7bb7 380LINE: while(<IN>)
151b83f8 381 {
8f1cff48 382RESET_AFTER_EXTRA_LINE_READ:
c9a55f6a
JH
383 # Custom munges
384 if ($extra)
385 {
386 next if $extra =~ m%^/% && eval $extra;
387 eval $extra if $extra =~ m/^s/;
388 }
389
151b83f8
PH
390 # Check for "*** truncated ***"
391 $yield = 1 if /\*\*\* truncated \*\*\*/;
392
393 # Replace the name of this host
394 s/\Q$parm_hostname\E/the.local.host.name/g;
395
396 # But convert "name=the.local.host address=127.0.0.1" to use "localhost"
397 s/name=the\.local\.host address=127\.0\.0\.1/name=localhost address=127.0.0.1/g;
398
d40f27c3
JH
399 # The name of the shell may vary
400 s/\s\Q$parm_shell\E\b/ ENV_SHELL/;
401
151b83f8
PH
402 # Replace the path to the testsuite directory
403 s?\Q$parm_cwd\E?TESTSUITE?g;
404
405 # Replace the Exim version number (may appear in various places)
a769a501 406 # patchexim should have fixed this for us
026d45f5 407 #s/(Exim) \d+\.\d+[\w_-]*/$1 x.yz/i;
151b83f8
PH
408
409 # Replace Exim message ids by a unique series
410 s/((?:[^\W_]{6}-){2}[^\W_]{2})
411 /new_value($1, "10Hm%s-0005vi-00", \$next_msgid)/egx;
412
413 # The names of lock files appear in some error and debug messages
414 s/\.lock(\.[-\w]+)+(\.[\da-f]+){2}/.lock.test.ex.dddddddd.pppppppp/;
415
416 # Unless we are in an IPv6 test, replace IPv4 and/or IPv6 in "listening on
417 # port" message, because it is not always the same.
418 s/port (\d+) \([^)]+\)/port $1/g
419 if !$is_ipv6test && m/listening for SMTP(S?) on port/;
420
421 # Challenges in SPA authentication
422 s/TlRMTVNTUAACAAAAAAAAAAAoAAABgg[\w+\/]+/TlRMTVNTUAACAAAAAAAAAAAoAAABggAAAEbBRwqFwwIAAAAAAAAAAAAt1sgAAAAA/;
423
424 # PRVS values
85b6260a
PH
425 s?prvs=([^/]+)/[\da-f]{10}@?prvs=$1/xxxxxxxxxx@?g; # Old form
426 s?prvs=[\da-f]{10}=([^@]+)@?prvs=xxxxxxxxxx=$1@?g; # New form
151b83f8 427
b6d22362
PH
428 # There are differences in error messages between OpenSSL versions
429 s/SSL_CTX_set_cipher_list/SSL_connect/;
430
151b83f8
PH
431 # One error test in expansions mentions base 62 or 36
432 s/is not a base (36|62) number/is not a base 36\/62 number/;
433
434 # This message sometimes has a different number of seconds
435 s/forced fail after \d seconds/forced fail after d seconds/;
436
437 # This message may contain a different DBM library name
438 s/Failed to open \S+( \([^\)]+\))? file/Failed to open DBM file/;
439
440 # The message for a non-listening FIFO varies
441 s/:[^:]+: while opening named pipe/: Error: while opening named pipe/;
442
151b83f8
PH
443 # Debugging output of lists of hosts may have different sort keys
444 s/sort=\S+/sort=xx/ if /^\S+ (?:\d+\.){3}\d+ mx=\S+ sort=\S+/;
445
446 # Random local part in callout cache testing
447 s/myhost.test.ex-\d+-testing/myhost.test.ex-dddddddd-testing/;
9bfc60eb 448 s/the.local.host.name-\d+-testing/the.local.host.name-dddddddd-testing/;
151b83f8 449
1b781f48
PH
450 # File descriptor numbers may vary
451 s/^writing data block fd=\d+/writing data block fd=dddd/;
fc43746d 452 s/(running as transport filter:) fd_write=\d+ fd_read=\d+/$1 fd_write=dddd fd_read=dddd/;
1b781f48 453
151b83f8
PH
454
455 # ======== Dumpdb output ========
456 # This must be before the general date/date munging.
457 # Time data lines, which look like this:
458 # 25-Aug-2000 12:11:37 25-Aug-2000 12:11:37 26-Aug-2000 12:11:37
459 if (/^($date)\s+($date)\s+($date)(\s+\*)?\s*$/)
460 {
461 my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4);
9a8a6839 462 $expired = '' if !defined $expired;
1c477b37
JH
463
464 # Round the time-difference up to nearest even value
465 my($increment) = ((date_seconds($date3) - date_seconds($date2) + 1) >> 1) << 1;
151b83f8
PH
466
467 # We used to use globally unique replacement values, but timing
468 # differences make this impossible. Just show the increment on the
469 # last one.
470
471 printf MUNGED ("first failed = time last try = time2 next try = time2 + %s%s\n",
472 $increment, $expired);
473 next;
474 }
475
476 # more_errno values in exim_dumpdb output which are times
477 s/T:(\S+)\s-22\s(\S+)\s/T:$1 -22 xxxx /;
478
fc1c0820 479 # port numbers in dumpdb output
485b86b9
JH
480 s/T:([a-z.]+(:[0-9.]+)?):$parm_port_n /T:$1:PORT_N /;
481
67ea939c
JH
482 # port numbers in stderr
483 s/^set_process_info: .*\]:\K$parm_port_d /PORT_D /;
484 s/^set_process_info: .*\]:\K$parm_port_s /PORT_S /;
485
151b83f8
PH
486
487 # ======== Dates and times ========
488
489 # Dates and times are all turned into the same value - trying to turn
490 # them into different ones cannot be done repeatedly because they are
491 # real time stamps generated while running the test. The actual date and
492 # time used was fixed when I first started running automatic Exim tests.
493
494 # Date/time in header lines and SMTP responses
eebcfa1c 495 s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
151b83f8 496 /Tue, 2 Mar 1999 09:44:33 +0000/gx;
efc8902f 497 # and in a French locale
eebcfa1c 498 s/\S{4},\s\d\d?\s[^,]+\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
efc8902f 499 /dim., 10 f\xE9vr 2019 20:05:49 +0000/gx;
151b83f8
PH
500
501 # Date/time in logs and in one instance of a filter test
571b2715
JH
502 s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d(\s[+-]\d\d\d\d)?\s/1999-03-02 09:44:33 /gx;
503 s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}(\s[+-]\d\d\d\d)?\s/2017-07-30 18:51:05.712 /gx;
151b83f8 504 s/^Logwrite\s"\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Logwrite "1999-03-02 09:44:33/gx;
777e3bea
JH
505 # Date/time in syslog test
506 s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\s/2017-07-30 18:51:05 /gx;
507 s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}\s/2017-07-30 18:51:05.712 /gx;
508 s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\s[+-]\d\d\d\d\s/2017-07-30 18:51:05 +9999 /gx;
509 s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}\s[+-]\d\d\d\d\s/2017-07-30 18:51:05.712 +9999 /gx;
151b83f8 510
306c6c77
JH
511 s/((D|[RQD]T)=)\d+s/$1qqs/g;
512 s/((D|[RQD]T)=)\d\.\d{3}s/$1q.qqqs/g;
32dfdf8b 513
151b83f8
PH
514 # Date/time in message separators
515 s/(?:[A-Z][a-z]{2}\s){2}\d\d\s\d\d:\d\d:\d\d\s\d\d\d\d
516 /Tue Mar 02 09:44:33 1999/gx;
517
518 # Date of message arrival in spool file as shown by -Mvh
519 s/^\d{9,10}\s0$/ddddddddd 0/;
520
521 # Date/time in mbx mailbox files
522 s/\d\d-\w\w\w-\d\d\d\d\s\d\d:\d\d:\d\d\s[-+]\d\d\d\d,/06-Sep-1999 15:52:48 +0100,/gx;
523
ea49d0e1 524 # Dates/times in debugging output for writing retry records
151b83f8
PH
525 if (/^ first failed=(\d+) last try=(\d+) next try=(\d+) (.*)$/)
526 {
527 my($next) = $3 - $2;
528 $_ = " first failed=dddd last try=dddd next try=+$next $4\n";
529 }
de6f74f2 530 s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
148e1ac6 531 s/^(\s*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/;
151b83f8
PH
532
533 # Time to retry may vary
ea49d0e1
PH
534 s/time to retry = \S+/time to retry = tttt/;
535 s/retry record exists: age=\S+/retry record exists: age=ttt/;
727071f8 536 s/failing_interval=\S+ message_age=\S+/failing_interval=ttt message_age=ttt/;
151b83f8
PH
537
538 # Date/time in exim -bV output
539 s/\d\d-[A-Z][a-z]{2}-\d{4}\s\d\d:\d\d:\d\d/07-Mar-2000 12:21:52/g;
540
f3f065bb
PH
541 # Eximstats heading
542 s/Exim\sstatistics\sfrom\s\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\sto\s
543 \d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Exim statistics from <time> to <time>/x;
544
7f8794a2
JH
545 # Treat ECONNRESET the same as ECONNREFUSED. At least some systems give
546 # us the former on a new connection.
547 s/(could not connect to .*: Connection) reset by peer$/$1 refused/;
151b83f8 548
6bf5d8f2 549 # ======== TLS certificate algorithms ========
f1be21cf
JH
550 #
551 # In Received: headers, convert RFC 8314 style ciphersuite to
552 # the older (comment) style, keeping only the Auth element
553 # (discarding kex, cipher, mac). For TLS 1.3 there is no kex
554 # element (and no _WITH); insert a spurious "RSA".
da40b1ec 555 # Also in $tls_X_cipher_std reporting.
f1be21cf 556
da40b1ec
JH
557 s/^\s+by \S+ with .+ \K \(TLS1(?:\.[0-3])?\) tls TLS_.*?([^_]+)_WITH.+$/(TLS1.x:ke-$1-AES256-SHAnnn:xxx)/;
558 s/^\s+by \S+ with .+ \K \(TLS1(?:\.[0-3])?\) tls TLS_.+$/(TLS1.x:ke-RSA-AES256-SHAnnn:xxx)/;
559
560 s/ cipher_ TLS_.*?([^_]+)_WITH.+$/ cipher_ TLS1.x:ke_$1_WITH_ci_mac/;
561 s/ cipher_ TLS_.*$/ cipher_ TLS1.x:ke_RSA_WITH_ci_mac/;
f1be21cf 562
6bf5d8f2
PP
563 # Test machines might have various different TLS library versions supporting
564 # different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
565 # treat the standard algorithms the same.
9e9ad3ee 566 #
da40b1ec 567 # TLSversion : KeyExchange? - Authentication/Signature - C_iph_er - MAC : bits
9e9ad3ee 568 #
6bf5d8f2 569 # So far, have seen:
d7e464f4 570 # TLSv1:AES128-GCM-SHA256:128
6bf5d8f2 571 # TLSv1:AES256-SHA:256
ce42f3ed 572 # TLSv1.1:AES256-SHA:256
6bf5d8f2 573 # TLSv1.2:AES256-GCM-SHA384:256
1508acb8 574 # TLSv1.2:DHE-RSA-AES256-SHA:256
0c3807a8 575 # TLSv1.3:TLS_AES_256_GCM_SHA384:256
75fe387d 576 # TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
6bf5d8f2
PP
577 # We also need to handle the ciphersuite without the TLS part present, for
578 # client-ssl's output. We also see some older forced ciphersuites, but
579 # negotiating TLS 1.2 instead of 1.0.
580 # Mail headers (...), log-lines X=..., client-ssl output ...
581 # (and \b doesn't match between ' ' and '(' )
b60b2eea
JH
582 #
583 # Retain the authentication algorith field as we want to test that.
6bf5d8f2 584
da40b1ec 585 s/( (?: (?:\b|\s) [\(=] ) | \s )TLS1(\.[123])?:/$1TLS1.x:/xg;
826cb8c2
JH
586 s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-AES(128|256)-(GCM-SHA(256|384)|SHA)(?!:)/ke-$3-AES256-SHAnnn/g;
587 s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-AES(128|256)-(GCM-SHA(256|384)|SHA):(128|256)/ke-$3-AES256-SHAnnn:xxx/g;
6bf5d8f2 588
0c3807a8 589 # OpenSSL TLSv1.3 - unsure what to do about the authentication-variant testcases now,
9e9ad3ee
JH
590 # as it seems the protocol no longer supports a user choice. Replace the "TLS" field with "RSA".
591 # Also insert a key-exchange field for back-compat, even though 1.3 doesn't do that.
592 #
593 # TLSversion : "TLS" - C_iph_er - MAC : ???
594 #
826cb8c2
JH
595 s/TLS_AES(_256)?_GCM_SHA384(?!:)/ke-RSA-AES256-SHAnnn/g;
596 s/:TLS_AES(_256)?_GCM_SHA384:256/:ke-RSA-AES256-SHAnnn:xxx/g;
0c3807a8 597
4cc77633 598 # LibreSSL
205aba45 599 # TLSv1:AES256-GCM-SHA384:256
4cc77633 600 # TLSv1:ECDHE-RSA-CHACHA20-POLY1305:256
205aba45
JH
601 #
602 # ECDHE-RSA-CHACHA20-POLY1305
603 # AES256-GCM-SHA384
604
605 s/(?<!-)(AES256-GCM-SHA384)/RSA-$1/;
826cb8c2
JH
606 s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-(AES256|CHACHA20)-(GCM-SHA384|POLY1305)(?!:)/ke-$3-AES256-SHAnnn/g;
607 s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-(AES256|CHACHA20)-(GCM-SHA384|POLY1305):256/ke-$3-AES256-SHAnnn:xxx/g;
4cc77633 608
75fe387d 609 # GnuTLS have seen:
826cb8c2 610 # TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256
d9acfc1c
JH
611 # TLS1.3:ECDHE_SECP256R1__RSA_PSS_RSAE_SHA256__AES_256_GCM__AEAD:256
612 # TLS1.3:ECDHE_X25519__RSA_PSS_RSAE_SHA256__AES_256_GCM:256
613 # TLS1.3:ECDHE_PSK_SECP256R1__AES_256_GCM__AEAD:256
826cb8c2 614 #
62b56dbf
JH
615 # TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256
616 # TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128
75fe387d
PP
617 # TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
618 # TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
d9acfc1c
JH
619 # TLS1.2:ECDHE_SECP256R1__RSA_SHA256__AES_256_GCM:256
620 # TLS1.2:ECDHE_SECP256R1__RSA_SHA256__AES_128_CBC__SHA256:128
621 # TLS1.2:ECDHE_SECP256R1__ECDSA_SHA512__AES_256_GCM:256
b10c87b3
JH
622 # TLS1.2:ECDHE_SECP256R1__AES_256_GCM:256 (3.6.7 resumption)
623 # TLS1.2:ECDHE_RSA_SECP256R1__AES_256_GCM:256 (! 3.5.18 !)
624 # TLS1.2:RSA__CAMELLIA_256_GCM:256 (leave the cipher name)
625 # TLS1.2-PKIX:RSA__AES_128_GCM__AEAD:128 (the -PKIX seems to be a 3.1.20 thing)
0565fc5a 626 # TLS1.2-PKIX:ECDHE_RSA_SECP521R1__AES_256_GCM__AEAD:256
75fe387d
PP
627 #
628 # X=TLS1.2:DHE_RSA_AES_256_CBC_SHA256:256
bc9a5bcb
JH
629 # X=TLS1.2:RSA_AES_256_CBC_SHA1:256
630 # X=TLS1.1:RSA_AES_256_CBC_SHA1:256
0565fc5a 631 # X=TLS1.0:RSA_AES_256_CBC_SHA1:256
75fe387d 632 # X=TLS1.0:DHE_RSA_AES_256_CBC_SHA1:256
0565fc5a 633 # X=TLS1.0-PKIX:RSA__AES_256_CBC__SHA1:256
75fe387d 634 # and as stand-alone cipher:
62b56dbf 635 # ECDHE-RSA-AES256-SHA
75fe387d
PP
636 # DHE-RSA-AES256-SHA256
637 # DHE-RSA-AES256-SHA
638 # picking latter as canonical simply because regex easier that way.
826cb8c2 639 s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA-AES256-SHA1:256/g;
da40b1ec 640 s/TLS1.[x0123](-PKIX)?: # TLS version
0565fc5a
JH
641 ((EC)?DHE(_((?<psk>PSK)_)?((?<auth>RSA|ECDSA)_)?
642 (SECP(256|521)R1|X25519))?__?)? # key-exchange
643 ((?<auth>RSA|ECDSA)((_PSS_RSAE)?_SHA(512|256))?__?)? # authentication
da40b1ec 644 (?<with>WITH_)? # stdname-with
0565fc5a
JH
645 AES_(256|128)_(CBC|GCM) # cipher
646 (__?AEAD)? # pseudo-MAC
647 (__?SHA(1|256|384))? # PRF
648 :(256|128) # cipher strength
d9acfc1c
JH
649 /"TLS1.x:ke-"
650 . (defined($+{psk}) ? $+{psk} : "")
651 . (defined($+{auth}) ? $+{auth} : "")
da40b1ec 652 . (defined($+{with}) ? $+{with} : "")
6010e708 653 . "-AES256-SHAnnn:xxx"/gex;
d9acfc1c 654 s/TLS1.2:RSA__CAMELLIA_256_GCM(_SHA384)?:256/TLS1.2:RSA_CAMELLIA_256_GCM-SHAnnn:256/g;
826cb8c2 655 s/\b(ECDHE-(RSA|ECDSA)-AES256-SHA|DHE-RSA-AES256-SHA256)\b/ke-$2-AES256-SHAnnn/g;
62b56dbf 656
da40b1ec
JH
657 # Separate reporting of TLS version
658 s/ver: TLS1(\.[0-3])?$/ver: TLS1.x/;
659 s/ \(TLS1(\.[0-3])?\) / (TLS1.x) /;
660
62b56dbf 661 # GnuTLS library error message changes
57eb2f64 662 s/(No certificate was found|Certificate is required)/The peer did not send any certificate/g;
62b56dbf
JH
663#(dodgy test?) s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
664 s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
8008accd 665 s/\(gnutls_handshake\): \KNo supported cipher suites have been found.$/Could not negotiate a supported cipher suite./;
62b56dbf 666
2b4a568d
JH
667 # (this new one is a generic channel-read error, but the testsuite
668 # only hits it in one place)
c562fd30 669 s/TLS error on connection \(gnutls_handshake\): Error in the pull function\./a TLS session is required but an attempt to start TLS failed/g;
2b4a568d 670
62b56dbf 671 # (replace old with new, hoping that old only happens in one situation)
09b16492
JH
672 s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
673 s/TLS error on connection from \[127.0.0.1\] \(recv\): A TLS packet with unexpected length was received./TLS error on connection from [127.0.0.1] (recv): The TLS connection was non-properly terminated./g;
75fe387d 674
348051ad 675 # signature algorithm names
2335af87 676 s/RSA-SHA1/RSA-SHA/;
348051ad 677
6bf5d8f2 678
eeeda78a 679 # ======== Caller's login, uid, gid, home, gecos ========
151b83f8
PH
680
681 s/\Q$parm_caller_home\E/CALLER_HOME/g; # NOTE: these must be done
682 s/\b\Q$parm_caller\E\b/CALLER/g; # in this order!
683 s/\b\Q$parm_caller_group\E\b/CALLER/g; # In case group name different
684
685 s/\beuid=$parm_caller_uid\b/euid=CALLER_UID/g;
686 s/\begid=$parm_caller_gid\b/egid=CALLER_GID/g;
687
688 s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
689 s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
690
903546d8 691 s/\bname="?$parm_caller_gecos"?/name=CALLER_GECOS/g;
eeeda78a 692
151b83f8
PH
693 # When looking at spool files with -Mvh, we will find not only the caller
694 # login, but also the uid and gid. It seems that $) in some Perls gives all
695 # the auxiliary gids as well, so don't bother checking for that.
696
697 s/^CALLER $> \d+$/CALLER UID GID/;
698
699 # There is one case where the caller's login is forced to something else,
700 # in order to test the processing of logins that contain spaces. Weird what
701 # some people do, isn't it?
702
703 s/^spaced user $> \d+$/CALLER UID GID/;
704
705
706 # ======== Exim's login ========
ebeaf996
PH
707 # For messages received by the daemon, this is in the -H file, which some
708 # tests inspect. For bounce messages, this will appear on the U= lines in
709 # logs and also after Received: and in addresses. In one pipe test it appears
710 # after "Running as:". It also appears in addresses, and in the names of lock
151b83f8
PH
711 # files.
712
713 s/U=$parm_eximuser/U=EXIMUSER/;
714 s/user=$parm_eximuser/user=EXIMUSER/;
715 s/login=$parm_eximuser/login=EXIMUSER/;
716 s/Received: from $parm_eximuser /Received: from EXIMUSER /;
717 s/Running as: $parm_eximuser/Running as: EXIMUSER/;
718 s/\b$parm_eximuser@/EXIMUSER@/;
719 s/\b$parm_eximuser\.lock\./EXIMUSER.lock./;
720
721 s/\beuid=$parm_exim_uid\b/euid=EXIM_UID/g;
722 s/\begid=$parm_exim_gid\b/egid=EXIM_GID/g;
723
724 s/\buid=$parm_exim_uid\b/uid=EXIM_UID/g;
725 s/\bgid=$parm_exim_gid\b/gid=EXIM_GID/g;
726
ebeaf996
PH
727 s/^$parm_eximuser $parm_exim_uid $parm_exim_gid/EXIMUSER EXIM_UID EXIM_GID/;
728
151b83f8
PH
729
730 # ======== General uids, gids, and pids ========
731 # Note: this must come after munges for caller's and exim's uid/gid
732
a4dc33a8
PH
733 # These are for systems where long int is 64
734 s/\buid=4294967295/uid=-1/;
735 s/\beuid=4294967295/euid=-1/;
736 s/\bgid=4294967295/gid=-1/;
737 s/\begid=4294967295/egid=-1/;
738
151b83f8
PH
739 s/\bgid=\d+/gid=gggg/;
740 s/\begid=\d+/egid=gggg/;
f63e7252 741 s/\b(pid=|PID: )\d+/$1pppp/;
151b83f8
PH
742 s/\buid=\d+/uid=uuuu/;
743 s/\beuid=\d+/euid=uuuu/;
744 s/set_process_info:\s+\d+/set_process_info: pppp/;
745 s/queue run pid \d+/queue run pid ppppp/;
746 s/process \d+ running as transport filter/process pppp running as transport filter/;
747 s/process \d+ writing to transport filter/process pppp writing to transport filter/;
748 s/reading pipe for subprocess \d+/reading pipe for subprocess pppp/;
749 s/remote delivery process \d+ ended/remote delivery process pppp ended/;
750
751 # Pid in temp file in appendfile transport
752 s"test-mail/temp\.\d+\."test-mail/temp.pppp.";
753
f3f065bb 754 # Optional pid in log lines
777e3bea
JH
755 s/^(\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d)(\.\d{3}|)(\s[+-]\d{4}|)(\s\[\d+\])/
756 "$1$2$3 [" . new_value($4, "%s", \$next_pid) . "]"/gxe;
757
758 # Optional pid in syslog test lines
759 s/^(SYSLOG:\s\'([-0-9]{10}\s[:.0-9]{8,12}\s([-+]\d{4}\s)?|))(\[\d+\] )/
760 "$1\[" . new_value($4, "%s", \$next_pid) . "]"/gxe;
f3f065bb 761
151b83f8
PH
762 # Detect a daemon stderr line with a pid and save the pid for subsequent
763 # removal from following lines.
764 $spid = $1 if /^(\s*\d+) (?:listening|LOG: MAIN|(?:daemon_smtp_port|local_interfaces) overridden by)/;
765 s/^$spid //;
766
767 # Queue runner waiting messages
768 s/waiting for children of \d+/waiting for children of pppp/;
769 s/waiting for (\S+) \(\d+\)/waiting for $1 (pppp)/;
770
e9da1794
JH
771 # Most builds are without HAVE_LOCAL_SCAN
772 next if /^calling local_scan\(\); timeout=300$/;
773 next if /^local_scan\(\) returned 0 NULL$/;
774
151b83f8
PH
775 # ======== Port numbers ========
776 # Incoming port numbers may vary, but not in daemon startup line.
777
778 s/^Port: (\d+)/"Port: " . new_value($1, "%s", \$next_port)/e;
779 s/\(port=(\d+)/"(port=" . new_value($1, "%s", \$next_port)/e;
780
781 # This handles "connection from" and the like, when the port is given
4311097e
PH
782 if (!/listening for SMTP on/ && !/Connecting to/ && !/=>/ && !/->/
783 && !/\*>/ && !/Connection refused/)
151b83f8
PH
784 {
785 s/\[([a-z\d:]+|\d+(?:\.\d+){3})\]:(\d+)/"[".$1."]:".new_value($2,"%s",\$next_port)/ie;
786 }
787
788 # Port in host address in spool file output from -Mvh
f3ebb786 789 s/^(--?host_address) (.*)\.\d+/$1 $2.9999/;
151b83f8 790
df613eb4
HSHR
791 if ($dynamic_socket and $dynamic_socket->opened and my $port = $dynamic_socket->sockport) {
792 s/^Connecting to 127\.0\.0\.1 port \K$port/<dynamic port>/;
793 }
794
151b83f8
PH
795
796 # ======== Local IP addresses ========
797 # The amount of space between "host" and the address in verification output
798 # depends on the length of the host name. We therefore reduce it to one space
799 # for all of them.
37acd760
JJ
800 # Also, the length of space at the end of the host line is dependent
801 # on the length of the longest line, so strip it also on otherwise
802 # un-rewritten lines like localhost
cc49c697
HSHR
803 #
804 # host 127.0.0.1 [127.0.0.1]
805 # host 10.0.0.1 [10.0.0.1]-
806 #
807 # host 127.0.0.1 [127.0.0.1]--
808 # host 169.16.16.16 [169.16.16.10]
151b83f8
PH
809
810 s/^\s+host\s(\S+)\s+(\S+)/ host $1 $2/;
811 s/^\s+(host\s\S+\s\S+)\s+(port=.*)/ host $1 $2/;
812 s/^\s+(host\s\S+\s\S+)\s+(?=MX=)/ $1 /;
813 s/host\s\Q$parm_ipv4\E\s\[\Q$parm_ipv4\E\]/host ipv4.ipv4.ipv4.ipv4 [ipv4.ipv4.ipv4.ipv4]/;
814 s/host\s\Q$parm_ipv6\E\s\[\Q$parm_ipv6\E\]/host ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6 [ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6]/;
815 s/\b\Q$parm_ipv4\E\b/ip4.ip4.ip4.ip4/g;
48dc5470 816 s/(^|\W)\K\Q$parm_ipv6\E/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
40e3c5bf 817 s/(^|\W)\K\Q$parm_ipv6_stripped\E/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
75758eeb 818 s/\b\Q$parm_ipv4r\E\b/ip4-reverse/g;
48dc5470 819 s/(^|\W)\K\Q$parm_ipv6r\E/ip6-reverse/g;
cc49c697 820 s/^\s+host\s\S+\s+\[\S+\]\K +$//; # strip, not collapse the trailing whitespace
151b83f8
PH
821
822
823 # ======== Test network IP addresses ========
824 s/(\b|_)\Q$parm_ipv4_test_net\E(?=\.\d+\.\d+\.\d+\b|_|\.rbl|\.in-addr|\.test\.again\.dns)/$1V4NET/g;
825 s/\b\Q$parm_ipv6_test_net\E(?=:[\da-f]+:[\da-f]+:[\da-f]+)/V6NET/gi;
826
827
828 # ======== IP error numbers and messages ========
829 # These vary between operating systems
6a72548d 830 s/Can(no|')t assign requested address/Network Error/;
151b83f8
PH
831 s/Operation timed out/Connection timed out/;
832 s/Address family not supported by protocol family/Network Error/;
6a72548d 833 s/Network( is)? unreachable/Network Error/;
151b83f8
PH
834 s/Invalid argument/Network Error/;
835
836 s/\(\d+\): Network/(dd): Network/;
837 s/\(\d+\): Connection refused/(dd): Connection refused/;
838 s/\(\d+\): Connection timed out/(dd): Connection timed out/;
839 s/\d+ 65 Connection refused/dd 65 Connection refused/;
840 s/\d+ 321 Connection timed out/dd 321 Connection timed out/;
841
842
843 # ======== Other error numbers ========
844 s/errno=\d+/errno=dd/g;
845
f4bb1d53
HSHR
846 # ======== System Error Messages ======
847 # depending on the underlaying file system the error message seems to differ
848 s/(?: is not a regular file)|(?: has too many links \(\d+\))/ not a regular file or too many links/;
151b83f8
PH
849
850 # ======== Output from ls ========
851 # Different operating systems use different spacing on long output
c1e49b79
PP
852 #s/ +/ /g if /^[-rwd]{10} /;
853 # (Bug 1226) SUSv3 allows a trailing printable char for modified access method control.
854 # Handle only the Gnu and MacOS space, dot, plus and at-sign. A full [[:graph:]]
855 # unfortunately matches a non-ls linefull of dashes.
856 # Allow the case where we've already picked out the file protection bits.
6f99d4d9 857 if (s/^([-d](?:[-r][-w][-SsTtx]){3})[.+@]?( +|$)/$1$2/) {
8dfac759
PP
858 s/ +/ /g;
859 }
151b83f8
PH
860
861
862 # ======== Message sizes =========
863 # Message sizes vary, owing to different logins and host names that get
864 # automatically inserted. I can't think of any way of even approximately
865 # comparing these.
866
867 s/([\s,])S=\d+\b/$1S=sss/;
868 s/:S\d+\b/:Ssss/;
869 s/^(\s*\d+m\s+)\d+(\s+[a-z0-9-]{16} <)/$1sss$2/i if $is_stdout;
1f253d34 870 s/\sSIZE=\d+\b/ SIZE=ssss/;
151b83f8
PH
871 s/\ssize=\d+\b/ size=sss/ if $is_stderr;
872 s/old size = \d+\b/old size = sssss/;
873 s/message size = \d+\b/message size = sss/;
874 s/this message = \d+\b/this message = sss/;
875 s/Size of headers = \d+/Size of headers = sss/;
876 s/sum=(?!0)\d+/sum=dddd/;
3b5d5078
JH
877 s/(?<=sum=dddd )count=\d+\b/count=dd/;
878 s/(?<=sum=0 )count=\d+\b/count=dd/;
151b83f8
PH
879 s/,S is \d+\b/,S is ddddd/;
880 s/\+0100,\d+;/+0100,ddd;/;
881 s/\(\d+ bytes written\)/(ddd bytes written)/;
882 s/added '\d+ 1'/added 'ddd 1'/;
f3f065bb
PH
883 s/Received\s+\d+/Received nnn/;
884 s/Delivered\s+\d+/Delivered nnn/;
151b83f8
PH
885
886
a98e6aca
HSHR
887 # ======== Values in spool space failure message ========
888 s/space=\d+ inodes=[+-]?\d+/space=xxxxx inodes=xxxxx/;
889
890
151b83f8
PH
891 # ======== Filter sizes ========
892 # The sizes of filter files may vary because of the substitution of local
893 # filenames, logins, etc.
894
f5bf7636 895 s/^\d+(?= (\(tainted\) )?bytes read from )/ssss/;
151b83f8
PH
896
897
898 # ======== OpenSSL error messages ========
899 # Different releases of the OpenSSL libraries seem to give different error
900 # numbers, or handle specific bad conditions in different ways, leading to
901 # different wording in the error messages, so we cannot compare them.
902
cf0c6164
JH
903#XXX This loses any trailing "deliving unencypted to" which is unfortunate
904# but I can't work out how to deal with that.
905 s/(TLS session: \(SSL_\w+\): error:)(.*)(?!: delivering)/$1 <<detail omitted>>/;
906 s/(TLS error on connection from .* \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
5f921f97 907 next if /SSL verify error: depth=0 error=certificate not trusted/;
151b83f8 908
151b83f8
PH
909 # ======== Maildir things ========
910 # timestamp output in maildir processing
911 s/(timestamp=|\(timestamp_only\): )\d+/$1ddddddd/g;
912
913 # maildir delivery files appearing in log lines (in cases of error)
914 s/writing to(?: file)? tmp\/\d+\.[^.]+\.(\S+)/writing to tmp\/MAILDIR.$1/;
915
916 s/renamed tmp\/\d+\.[^.]+\.(\S+) as new\/\d+\.[^.]+\.(\S+)/renamed tmp\/MAILDIR.$1 as new\/MAILDIR.$1/;
917
918 # Maildir file names in general
919 s/\b\d+\.H\d+P\d+\b/dddddddddd.HddddddPddddd/;
920
921 # Maildirsize data
01c490df 922 while (/^\d+S,\d+C\s*$/)
151b83f8 923 {
21c28500 924 print MUNGED;
151b83f8
PH
925 while (<IN>)
926 {
927 last if !/^\d+ \d+\s*$/;
928 print MUNGED "ddd d\n";
929 }
930 last if !defined $_;
931 }
01c490df 932 last if !defined $_;
151b83f8
PH
933
934
53618a40
JH
935 # SRS timestamps and signatures vary by hostname and from run to run
936
937 s/SRS0=....=..=[^=]+=[^@]+\@test.ex/SRS0=ZZZZ=YY=the.local.host.name=CALLER\@test.ex/;
938
939
151b83f8
PH
940 # ======== Output from the "fd" program about open descriptors ========
941 # The statuses seem to be different on different operating systems, but
942 # at least we'll still be checking the number of open fd's.
943
944 s/max fd = \d+/max fd = dddd/;
59620376 945 s/status=[0-9a-f]+ (?:RDONLY|WRONLY|RDWR)/STATUS/g;
151b83f8
PH
946
947
948 # ======== Contents of spool files ========
949 # A couple of tests dump the contents of the -H file. The length fields
950 # will be wrong because of different user names, etc.
951 s/^\d\d\d(?=[PFS*])/ddd/;
952
953
1bad4ba4
JH
954 # ========= Exim lookups ==================
955 # Lookups have a char which depends on the number of lookup types compiled in,
956 # in stderr output. Replace with a "0". Recognising this while avoiding
957 # other output is fragile; perhaps the debug output should be revised instead.
958 s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
44e6236d 959
151b83f8 960 # ==========================================================
bfd86064 961 # MIME boundaries in RFC3461 DSN messages
05faa88b 962 s/\d{8,10}-eximdsn-\d+/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;
bfd86064
JH
963
964 # ==========================================================
151b83f8
PH
965 # Some munging is specific to the specific file types
966
967 # ======== stdout ========
968
969 if ($is_stdout)
970 {
f3d7df6c
PH
971 # Skip translate_ip_address and use_classresources in -bP output because
972 # they aren't always there.
151b83f8
PH
973
974 next if /translate_ip_address =/;
f3d7df6c 975 next if /use_classresources/;
151b83f8
PH
976
977 # In certain filter tests, remove initial filter lines because they just
978 # clog up by repetition.
979
980 if ($rmfiltertest)
981 {
982 next if /^(Sender\staken\sfrom|
983 Return-path\scopied\sfrom|
984 Sender\s+=|
985 Recipient\s+=)/x;
986 if (/^Testing \S+ filter/)
987 {
988 $_ = <IN>; # remove blank line
989 next;
990 }
991 }
903546d8 992
7baddd6a
JH
993 # remote IPv6 addrs vary
994 s/^(Connection request from) \[.*:.*:.*\]$/$1 \[ipv6\]/;
995
903546d8 996 # openssl version variances
12373afb
JH
997 # Error lines on stdout from SSL contain process id values and file names.
998 # They also contain a source file name and line number, which may vary from
999 # release to release.
1000
80940bc0 1001 next if /^SSL info:/;
fc96d1e8 1002 next if /SSL verify error: depth=0 error=certificate not trusted/;
ef394e8d 1003 s/SSL3_READ_BYTES/ssl3_read_bytes/i;
503e0554
JH
1004 s/CONNECT_CR_FINISHED/ssl3_read_bytes/i;
1005 s/^\d+:error:\d+(?:E\d+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/;
fd3cf789 1006 s/^error:[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/error:dddddddd:$1/;
503e0554 1007
fc4fcc34
JH
1008 # gnutls version variances
1009 next if /^Error in the pull function./;
a678496c
JH
1010
1011 # optional IDN2 variant conversions. Accept either IDN1 or IDN2
1012 s/conversion strasse.de/conversion xn--strae-oqa.de/;
1013 s/conversion: german.xn--strae-oqa.de/conversion: german.straße.de/;
32dfdf8b
JH
1014
1015 # subsecond timstamp info in reported header-files
1016 s/^(-received_time_usec \.)\d{6}$/$1uuuuuu/;
f63e7252 1017
f1a49684 1018 # Postgres server takes varible time to shut down; lives in various places
f63e7252 1019 s/^waiting for server to shut down\.+ done$/waiting for server to shut down.... done/;
f1a49684 1020 s/^\/.*postgres /POSTGRES /;
617d3932 1021
590fd9ee
JH
1022 # DMARC is not always supported by the build
1023 next if /^dmarc_tld_file =/;
1024
617d3932
JH
1025 # ARC is not always supported by the build
1026 next if /^arc_sign =/;
b10c87b3
JH
1027
1028 # TLS resumption is not always supported by the build
1029 next if /^tls_resumption_hosts =/;
1030 next if /^-tls_resumption/;
84a65551
JH
1031
1032 # gsasl library version may not support some methods
1033 s/250-AUTH ANONYMOUS PLAIN SCRAM-SHA-1\K SCRAM-SHA-256//;
151b83f8
PH
1034 }
1035
1036 # ======== stderr ========
1037
1038 elsif ($is_stderr)
1039 {
1040 # The very first line of debugging output will vary
1041
1042 s/^Exim version .*/Exim version x.yz ..../;
1043
d097cc73 1044 # Debugging lines for Exim terminations and process-generation
151b83f8
PH
1045
1046 s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
d097cc73 1047 s/^(proxy-proc \w{5}-pid) \d+$/$1 pppp/;
6471ea33 1048 s/^(?:\s*\d+ )(exec .* -oPX)$/pppp $1/;
3b447cdf 1049 next if /(?:postfork: | fork(?:ing|ed) for )/;
836c3e41 1050
151b83f8
PH
1051 # IP address lookups use gethostbyname() when IPv6 is not supported,
1052 # and gethostbyname2() or getipnodebyname() when it is.
1053
4af1b6ca 1054 s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
151b83f8 1055
8f8950c3
JH
1056 # we don't care what TZ enviroment the testhost was running
1057 next if /^Reset TZ to/;
1058
f2dd649a
NM
1059 # drop gnutls version strings
1060 next if /GnuTLS compile-time version: \d+[\.\d]+$/;
1061 next if /GnuTLS runtime version: \d+[\.\d]+$/;
1062
64fa3c1f
JJ
1063 # drop openssl version strings
1064 next if /OpenSSL compile-time version: OpenSSL \d+[\.\da-z]+/;
1065 next if /OpenSSL runtime version: OpenSSL \d+[\.\da-z]+/;
1066
6471ea33
JH
1067 # this is timing-dependent
1068 next if /^OpenSSL: creating STEK$/;
1069
8f1cff48
PP
1070 # drop lookups
1071 next if /^Lookups \(built-in\):/;
a769a501
PP
1072 next if /^Loading lookup modules from/;
1073 next if /^Loaded \d+ lookup modules/;
8f1cff48
PP
1074 next if /^Total \d+ lookups/;
1075
bdf15279
PP
1076 # drop compiler information
1077 next if /^Compiler:/;
1078
8f1cff48
PP
1079 # and the ugly bit
1080 # different libraries will have different numbers (possibly 0) of follow-up
1081 # lines, indenting with more data
1082 if (/^Library version:/) {
1083 while (1) {
1084 $_ = <IN>;
1085 next if /^\s/;
1086 goto RESET_AFTER_EXTRA_LINE_READ;
1087 }
1088 }
1089
1090 # drop other build-time controls emitted for debugging
1091 next if /^WHITELIST_D_MACROS:/;
1092 next if /^TRUSTED_CONFIG_LIST:/;
1093
1094 # As of Exim 4.74, we log when a setgid fails; because we invoke Exim
1095 # with -be, privileges will have been dropped, so this will always
1096 # be the case
42ec9880 1097 next if /^changing group to \d+ failed: (Operation not permitted|Not owner)/;
8f1cff48 1098
9d26b8c0
PP
1099 # We might not keep this check; rather than change all the tests, just
1100 # ignore it as long as it succeeds; then we only need to change the
1101 # TLS tests where tls_require_ciphers has been set.
1102 if (m{^changed uid/gid: calling tls_validate_require_cipher}) {
1103 my $discard = <IN>;
1104 next;
1105 }
1106 next if /^tls_validate_require_cipher child \d+ ended: status=0x0/;
1107
4c04137d 1108 # We invoke Exim with -D, so we hit this new message as of Exim 4.73:
43236f35 1109 next if /^macros_trusted overridden to true by whitelisting/;
8f1cff48 1110
151b83f8
PH
1111 # We have to omit the localhost ::1 address so that all is well in
1112 # the IPv4-only case.
1113
1114 print MUNGED "MUNGED: ::1 will be omitted in what follows\n"
1115 if (/looked up these IP addresses/);
1116 next if /name=localhost address=::1/;
1117
f2dd649a 1118 # drop pdkim debugging header
305f8921 1119 next if /^DKIM( <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+|: no signatures)$/;
f2dd649a 1120
151b83f8
PH
1121 # Various other IPv6 lines must be omitted too
1122
1123 next if /using host_fake_gethostbyname for \S+ \(IPv6\)/;
1124 next if /get\[host\|ipnode\]byname\[2\]\(af=inet6\)/;
1125 next if /DNS lookup of \S+ \(AAAA\) using fakens/;
1126 next if / in dns_ipv4_lookup?/;
cdb844d0 1127 next if / writing neg-cache entry for .*AAAA/;
a713f766 1128 next if /^faking res_search\(AAAA\) response length as 65535/;
151b83f8
PH
1129
1130 if (/DNS lookup of \S+ \(AAAA\) gave NO_DATA/)
1131 {
1132 $_= <IN>; # Gets "returning DNS_NODATA"
1133 next;
1134 }
1135
9f6563c0 1136 # Non-TLS bulds have a different Recieved: header expansion
00ac951d 1137 s/^((.*)\t}}}}by \$primary_hostname \$\{if def:received_protocol \{with \$received_protocol }})\(Exim \$version_number\)$/$1\${if def:tls_in_cipher_std { tls \$tls_in_cipher_std\n$2\t}}(Exim \$version_number)/;
9f6563c0
JH
1138 s/^((\s*).*considering: with \$received_protocol }})\(Exim \$version_number\)$/$1\${if def:tls_in_cipher_std { tls \$tls_in_cipher_std\n$2\t}}(Exim \$version_number)/;
1139 if (/condition: def:tls_in_cipher_std$/)
1140 {
1141 $_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>;
1142 $_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>;
1143 $_= <IN>; $_= <IN>; $_= <IN>; next;
1144 }
1145
1146
151b83f8
PH
1147 # Skip tls_advertise_hosts and hosts_require_tls checks when the options
1148 # are unset, because tls ain't always there.
1149
1150 next if /in\s(?:tls_advertise_hosts\?|hosts_require_tls\?)
23f3dc67 1151 \sno\s\((option\sunset|end\sof\slist)\)/x;
151b83f8
PH
1152
1153 # Skip auxiliary group lists because they will vary.
1154
1155 next if /auxiliary group list:/;
1156
1157 # Skip "extracted from gecos field" because the gecos field varies
1158
1159 next if /extracted from gecos field/;
1160
1161 # Skip "waiting for data on socket" and "read response data: size=" lines
1162 # because some systems pack more stuff into packets than others.
1163
1164 next if /waiting for data on socket/;
1165 next if /read response data: size=/;
1166
1167 # If Exim is compiled with readline support but it can't find the library
1168 # to load, there will be an extra debug line. Omit it.
1169
1170 next if /failed to load readline:/;
1171
1172 # Some DBM libraries seem to make DBM files on opening with O_RDWR without
1173 # O_CREAT; other's don't. In the latter case there is some debugging output
1174 # which is not present in the former. Skip the relevant lines (there are
ca9be0dc 1175 # three of them).
151b83f8 1176
ca9be0dc 1177 if (/returned from EXIM_DBOPEN: \(nil\)/)
151b83f8 1178 {
ca9be0dc
JH
1179 $_ .= <IN>;
1180 s?\Q$parm_cwd\E?TESTSUITE?g;
1181 if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
1182 { $_ = <IN>; next; }
151b83f8
PH
1183 }
1184
1185 # Some tests turn on +expand debugging to check on expansions.
1186 # Unfortunately, the Received: expansion varies, depending on whether TLS
1187 # is compiled or not. So we must remove the relevant debugging if it is.
1188
1189 if (/^condition: def:tls_cipher/)
1190 {
1191 while (<IN>) { last if /^condition: def:sender_address/; }
1192 }
1193 elsif (/^expanding: Received: /)
1194 {
1195 while (<IN>) { last if !/^\s/; }
1196 }
1197
a2550b67
JH
1198 # remote port numbers vary
1199 s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
1200
ceaa36bf
JH
1201 # Platform-dependent error strings
1202 s/Operation timed out/Connection timed out/;
1203
5b799952
JH
1204 # Platform differences on disconnect
1205 s/unexpected disconnection while reading SMTP command from \[127.0.0.1\] \K\(error: Connection reset by peer\) //;
1206
27085351 1207 # Platform-dependent resolver option bits
d05b1259 1208 s/^ (?:writing|update) neg-cache entry for [^,]+-\K[0-9a-f]+, ttl/xxxx, ttl/;
27085351 1209
b6d5e1ac
JH
1210 # timing variance, run-to-run
1211 s/^time on queue = \K1s/0s/;
1212
b273058b
JH
1213 # content-scan: file order can vary in directory
1214 s%unspool_mbox\(\): unlinking 'TESTSUITE/spool/scan/[^/]*/\K[^\']*%FFFFFFFFF%;
1215
a2550b67
JH
1216 # Skip hosts_require_dane checks when the options
1217 # are unset, because dane ain't always there.
a2550b67
JH
1218 next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
1219
04403ab0 1220 # daemon notifier socket
691ca88c
JH
1221 s/^(\s*\d+|ppppp) (creating notifier socket)$/ppppp $2/;
1222 s/^ \@(.*exim_daemon_notify)$/ $1/;
26343207 1223 s/^(\s*\d+|ppppp) \@?(.*exim_daemon_notify)$/ppppp $2/;
2f2dd3a5 1224 next if /unlinking notifier socket/;
04403ab0 1225
6ddf7fd7 1226 # DISABLE_OCSP
625f40fc
JH
1227 next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
1228
a2550b67
JH
1229 # SUPPORT_PROXY
1230 next if /host in hosts_proxy\?/;
1231
4e48d56c
JH
1232 # PIPE_CONNECT
1233 next if / in (pipelining_connect_advertise_hosts|hosts_pipe_connect)?\? no /;
1234
a2550b67
JH
1235 # Experimental_International
1236 next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
1237
8ac90765
JH
1238 # Experimental_REQUIRETLS
1239 next if / in tls_advertise_requiretls?\? no \(end of list\)/;
1240
ca9be0dc 1241 # TCP Fast Open
9c487ba5 1242 next if /^(ppppp )?setsockopt FASTOPEN: Network Error/;
ca9be0dc 1243
a2550b67
JH
1244 # Environment cleaning
1245 next if /\w+ in keep_environment\? (yes|no)/;
1246
76003495
JH
1247 # Sizes vary with test hostname
1248 s/^cmd buf flush \d+ bytes$/cmd buf flush ddd bytes/;
1249
ddf1b11a 1250 # Spool filesystem free space changes on different systems.
ad424056 1251 s/^((?:spool|log) directory space =) -?\d+K (inodes =)\s*-?\d+/$1 nnnnnK $2 nnnnn/;
ddf1b11a 1252
7373d852 1253 # Non-TLS builds have different expansions for received_header_text
340f3113 1254 if (s/(with \$received_protocol)\}\} \$\{if def:tls_cipher \{\(\$tls_cipher\)\n$/$1/)
7373d852
JH
1255 {
1256 $_ .= <IN>;
492fd282 1257 s/[\s╎]+\}\}(?=\(Exim )/\}\} /;
7373d852 1258 }
492fd282 1259 if (/^ ├──condition: def:tls_cipher$/)
340f3113
JH
1260 {
1261 <IN>; <IN>; <IN>; <IN>; <IN>; <IN>;
1262 <IN>; <IN>; <IN>; <IN>; <IN>; next;
1263 }
1264
1265 # Not all platforms build with DKIM enabled
305f8921 1266 next if /^DKIM >> Body data for hash, canonicalized/;
7373d852 1267
e9ae2091
JH
1268 # Not all platforms build with SPF enabled
1269 next if /^(spf_conn_init|SPF_dns_exim_new|spf_compile\.c)/;
1270
61453fd1
JH
1271 # Not all platforms have sendfile support
1272 next if /^cannot use sendfile for body: no support$/;
1273
cd1a5fe0 1274 # Parts of DKIM-specific debug output depend on the time/date
02b41d71 1275 next if /^date:\w+,\{SP\}/;
305f8921 1276 next if /^DKIM \[[^[]+\] (Header hash|b) computed:/;
cd1a5fe0 1277
ef817659 1278 # Not all platforms support TCP Fast Open, and the compile omits the check
277b9979 1279 if (s/\S+ in hosts_try_fastopen\? (no \(option unset\)|no \(end of list\)|yes \(matched "\*"\))\n$//)
ef817659 1280 {
a3da0b8f 1281 chomp;
7373d852
JH
1282 $_ .= <IN>;
1283 s/ \.\.\. >>> / ... /;
a3da0b8f 1284 if (s/ non-TFO mode connection attempt to 224.0.0.0, 0 data\b$//) { chomp; $_ .= <IN>; }
30d678d5 1285 s/Address family not supported by protocol family/Network Error/;
b3200ced 1286 s/Network is unreachable/Network Error/;
ef817659 1287 }
8170f6f7 1288 next if /^(ppppp )?setsockopt FASTOPEN: Protocol not available$/;
fc1c0820 1289 s/^(Connecting to .* \.\.\. sending) \d+ (nonTFO early-data)$/$1 dd $2/;
7373d852 1290
f7598860
JH
1291 if (/^([0-9: ]* # possible timestamp
1292 Connecting\ to\ [^ ]+\ [^ ]+(\ from\ [^ ]+)?)\ \.\.\.
6ddf7fd7 1293 \ .*TFO\ mode\x20
f7598860 1294 (sendto,\ no\ data:\ EINPROGRESS # Linux
ceaa36bf 1295 |connection\ attempt\ to\ [^,]+,\ 0\ data) # MacOS & no-support
f7598860 1296 $/x)
eebcfa1c
JH
1297 {
1298 $_ = $1 . " ... " . <IN>;
b48cf079 1299 s/^(.* \.\.\.) [0-9: ]*connected$/$1 connected/;
eebcfa1c 1300
b48cf079 1301 if (/^Connecting to .* \.\.\. connected$/)
eebcfa1c
JH
1302 {
1303 $_ .= <IN>;
b48cf079 1304 if (/^(Connecting to .* \.\.\. )connected\n\s+SMTP(\(close\)>>|\(Connection refused\)<<)$/)
eebcfa1c
JH
1305 {
1306 $_ = $1 . "failed: Connection refused\n" . <IN>;
1307 s/^(Connecting .*)\n\s+SMTP\(close\)>>$/$1/;
1308 }
b48cf079 1309 elsif (/^(Connecting to .* \.\.\. connected\n)read response data: size=/)
eebcfa1c
JH
1310 { $_ = $1; }
1311
1312 # Date/time in SMTP banner
1313 s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
1314 /Tue, 2 Mar 1999 09:44:33 +0000/gx;
1315 }
1316 }
1317
0a6c178c 1318 # Specific pointer values reported for DB operations change from run to run
966e829c
JH
1319 s/^(\s*returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
1320 s/^(\s*EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
0a6c178c 1321
ff059213
JH
1322 # Platform-dependent output during MySQL startup
1323 next if /PerconaFT file system space/;
1324 next if /^Waiting for MySQL server to answer/;
1325 next if /mysqladmin: CREATE DATABASE failed; .* database exists/;
1326
55997e6c
JH
1327 # Not all builds include DMARC
1328 next if /^DMARC: no (dmarc_tld_file|sender_host_address)$/ ;
1329
b10c87b3
JH
1330 # TLS resumption is not always supported by the build
1331 next if /in tls_resumption_hosts\?/;
1332
aa3c7e48
JH
1333 # Platform differences in errno strings
1334 s/ SMTP\(Operation timed out\)<</ SMTP(Connection timed out)<</;
1335
adf703b6
JH
1336 # Platform differences for errno values (eg. Hurd)
1337 s/^errno = \d+$/errno = EEE/;
1338 s/^writing error \d+: /writing error EEE: /;
1339
64406161
JH
1340 # Some platforms have to flip to slow-mode taint-checking
1341 next if /switching to slow-mode taint checking/;
1342
151b83f8
PH
1343 # When Exim is checking the size of directories for maildir, it uses
1344 # the check_dir_size() function to scan directories. Of course, the order
1345 # of the files that are obtained using readdir() varies from system to
1346 # system. We therefore buffer up debugging lines from check_dir_size()
1347 # and sort them before outputting them.
1348
1349 if (/^check_dir_size:/ || /^skipping TESTSUITE\/test-mail\//)
1350 {
1351 push @saved, $_;
1352 }
1353 else
1354 {
1355 if (@saved > 0)
1356 {
1357 print MUNGED "MUNGED: the check_dir_size lines have been sorted " .
1358 "to ensure consistency\n";
1359 @saved = sort(@saved);
1360 print MUNGED @saved;
1361 @saved = ();
1362 }
1363
1364 # Skip some lines that Exim puts out at the start of debugging output
1365 # because they will be different in different binaries.
1366
1367 print MUNGED
1368 unless (/^Berkeley DB: / ||
1369 /^Probably (?:Berkeley DB|ndbm|GDBM)/ ||
1370 /^Authenticators:/ ||
1371 /^Lookups:/ ||
1372 /^Support for:/ ||
1373 /^Routers:/ ||
1374 /^Transports:/ ||
c11d665d 1375 /^Malware:/ ||
151b83f8
PH
1376 /^log selectors =/ ||
1377 /^cwd=/ ||
21c28500 1378 /^Fixed never_users:/ ||
c9fb6994 1379 /^Configure owner:/ ||
21c28500 1380 /^Size of off_t:/
151b83f8 1381 );
9d4319df
JH
1382
1383
151b83f8
PH
1384 }
1385
1386 next;
1387 }
1388
42ec9880
JH
1389 # ======== log ========
1390
1391 elsif ($is_log)
1392 {
1393 # Berkeley DB version differences
1394 next if / Berkeley DB error: /;
23a217d9
JH
1395
1396 # CHUNKING: exact sizes depend on hostnames in headers
1397 s/(=>.* K C="250- \d)\d+ (byte chunk, total \d)\d+/$1nn $2nn/;
f5978b01
JH
1398
1399 # openssl version variances
42427533 1400 s/(TLS error on connection [^:]*: error:)[0-9A-F]{8}(:system library):(?:fopen|func\(4095\)):(No such file or directory)$/$1xxxxxxxx$2:fopen:$3/;
4ed67f68 1401 s/(DANE attempt failed.*error:)[0-9A-F]{8}(:SSL routines:)(?:(?i)ssl3_get_server_certificate|tls_process_server_certificate|CONNECT_CR_CERT)(?=:certificate verify failed$)/$1xxxxxxxx$2ssl3_get_server_certificate/;
1955ffa1 1402 s/(DKIM: validation error: )error:[0-9A-F]{8}:rsa routines:(?:(?i)int_rsa_verify|CRYPTO_internal):(?:bad signature|algorithm mismatch)$/$1Public key signature verification has failed./;
57827776 1403 s/ARC: AMS signing: privkey PEM-block import: error:\K[0-9A-F]{8}:(PEM routines):get_name:(no start line)/0906D06C:$1:PEM_read_bio:$2/;
2bc0f45e 1404
fc243e94 1405 # gnutls version variances
57eb2f64 1406 if (/TLS error on connection \(recv\): .* (Decode error|peer did not send any certificate)/)
fc243e94
JH
1407 {
1408 my $prev = $_;
1409 $_ = <IN>;
1410 if (/error on first read/)
1411 {
1412 s/TLS session: \Kerror on first read:/(gnutls_handshake): A TLS fatal alert has been received.:/;
1413 goto RESET_AFTER_EXTRA_LINE_READ;
1414 }
1415 else
1416 { $_ = $prev; }
1417 }
766ac2f4
JH
1418 # translate gnutls error into the openssl one
1419 s/ARC: AMS signing: privkey PEM-block import: \KThe requested data were not available.$/error:0906D06C:PEM routines:PEM_read_bio:no start line/;
fc243e94 1420
2bc0f45e 1421 # DKIM timestamps
b24eb9cd
JH
1422 if ( /(DKIM: d=.*) t=([0-9]*) x=([0-9]*) / )
1423 {
1424 my ($prefix, $t_diff) = ($1, $3 - $2);
1425 s/DKIM: d=.* t=[0-9]* x=[0-9]* /${prefix} t=T x=T+${t_diff} /;
1426 }
2e6a0ed7
JH
1427
1428 # port numbers
1429 s/(?:\[[^\]]*\]:|port )\K$parm_port_d/PORT_D/;
1430 s/(?:\[[^\]]*\]:|port )\K$parm_port_d2/PORT_D2/;
1431 s/(?:\[[^\]]*\]:|port )\K$parm_port_d3/PORT_D3/;
1432 s/(?:\[[^\]]*\]:|port )\K$parm_port_d4/PORT_D4/;
1433 s/(?:\[[^\]]*\]:|port )\K$parm_port_s/PORT_S/;
1434 s/(?:\[[^\]]*\]:|port )\K$parm_port_n/PORT_N/;
1435 s/I=\[[^\]]*\]:\K\d+/ppppp/;
1436
adf703b6
JH
1437 # Platform differences for errno values (eg. Hurd). Leave 0 and negative numbers alone.
1438 s/R=\w+ T=\w+ defer\K \([1-9]\d*\): / (EEE): /;
e4a04f2a
JH
1439
1440 # Platform differences in errno strings
1441 s/Arg list too long/Argument list too long/;
2bc0f45e
JH
1442 }
1443
1444 # ======== mail ========
1445
1446 elsif ($is_mail)
1447 {
b24eb9cd
JH
1448 # DKIM timestamps, and signatures depending thereon
1449 if ( /^(\s+)t=([0-9]*); x=([0-9]*); b=[A-Za-z0-9+\/]+$/ )
1450 {
1451 my ($indent, $t_diff) = ($1, $3 - $2);
1452 s/.*/${indent}t=T; x=T+${t_diff}; b=bbbb;/;
2bc0f45e
JH
1453 <IN>;
1454 <IN>;
1455 }
42ec9880
JH
1456 }
1457
151b83f8
PH
1458 # ======== All files other than stderr ========
1459
1460 print MUNGED;
1461 }
1462
1463close(IN);
1464return $yield;
1465}
1466
1467
1468
1469
1470##################################################
1471# Subroutine to interact with caller #
1472##################################################
1473
1474# Arguments: [0] the prompt string
1475# [1] if there is a U in the prompt and $force_update is true
c1c469db 1476# [2] if there is a C in the prompt and $force_continue is true
2f8e6f30 1477# Returns: returns the answer
151b83f8 1478
0df394b5
HSHR
1479sub interact {
1480 my ($prompt, $have_u, $have_c) = @_;
1481
1482 print $prompt;
1483
1484 if ($have_u) {
1485 print "... update forced\n";
1486 return 'u';
1487 }
1488
1489 if ($have_c) {
1490 print "... continue forced\n";
1491 return 'c';
1492 }
1493
1494 return lc <T>;
151b83f8
PH
1495}
1496
1497
1498
c1c469db
TL
1499##################################################
1500# Subroutine to log in force_continue mode #
1501##################################################
1502
1503# In force_continue mode, we just want a terse output to a statically
1504# named logfile. If multiple files in same batch (stdout, stderr, etc)
1505# all have mismatches, it will log multiple times.
1506#
1507# Arguments: [0] the logfile to append to
1508# [1] the testno that failed
1509# Returns: nothing
1510
1511
1512
1513sub log_failure {
0df394b5
HSHR
1514 my ($logfile, $testno, $detail) = @_;
1515
1516 open(my $fh, '>>', $logfile) or return;
1517
1518 print $fh "Test $testno "
1519 . (defined $detail ? "$detail " : '')
1520 . "failed\n";
c1c469db
TL
1521}
1522
a4ecb6a7
JH
1523# Computer-readable summary results logfile
1524
1525sub log_test {
1526 my ($logfile, $testno, $resultchar) = @_;
1527
1528 open(my $fh, '>>', $logfile) or return;
1529 print $fh "$testno $resultchar\n";
1530}
1531
c1c469db 1532
151b83f8
PH
1533
1534##################################################
1535# Subroutine to compare one output file #
1536##################################################
1537
1538# When an Exim server is part of the test, its output is in separate files from
1539# an Exim client. The server data is concatenated with the client data as part
1540# of the munging operation.
1541#
1542# Arguments: [0] the name of the main raw output file
1543# [1] the name of the server raw output file or undef
1544# [2] where to put the munged copy
1545# [3] the name of the saved file
1546# [4] TRUE if this is a log file whose deliveries must be sorted
c9a55f6a 1547# [5] optionally, a custom munge command
151b83f8 1548#
a4ecb6a7
JH
1549# Returns: 0 comparison succeeded
1550# 1 comparison failed; differences to be ignored
1551# 2 comparison failed; files may have been updated (=> re-compare)
151b83f8
PH
1552#
1553# Does not return if the user replies "Q" to a prompt.
1554
1555sub check_file{
c9a55f6a 1556my($rf,$rsf,$mf,$sf,$sortfile,$extra) = @_;
151b83f8
PH
1557
1558# If there is no saved file, the raw files must either not exist, or be
1559# empty. The test ! -s is TRUE if the file does not exist or is empty.
1560
28e8a0f7
HSHR
1561# we check if there is a flavour specific file, but we remember
1562# the original file name as "generic"
1563$sf_generic = $sf;
1564$sf_flavour = "$sf_generic.$flavour";
1565$sf_current = -e $sf_flavour ? $sf_flavour : $sf_generic;
1566
1567if (! -e $sf_current)
151b83f8 1568 {
148e1ac6 1569 return 0 if (! -s $rf && (! defined $rsf || ! -s $rsf));
151b83f8
PH
1570
1571 print "\n";
1572 print "** $rf is not empty\n" if (-s $rf);
1573 print "** $rsf is not empty\n" if (defined $rsf && -s $rsf);
1574
1575 for (;;)
1576 {
0df394b5
HSHR
1577 $_ = interact('Continue, Show, or Quit? [Q] ', undef, $force_continue);
1578 tests_exit(1) if /^q?$/;
a4ecb6a7
JH
1579 if (/^c$/ && $force_continue) {
1580 log_failure($log_failed_filename, $testno, $rf);
1581 log_test($log_summary_filename, $testno, 'F') if ($force_continue);
1582 }
1477005f 1583 return 1 if /^c$/i && $rf !~ /paniclog/ && (!defined $rsf || $rsf !~ /paniclog/);
0aca614f 1584 last if (/^[sc]$/);
151b83f8
PH
1585 }
1586
1587 foreach $f ($rf, $rsf)
1588 {
1589 if (defined $f && -s $f)
1590 {
1591 print "\n";
1592 print "------------ $f -----------\n"
1593 if (defined $rf && -s $rf && defined $rsf && -s $rsf);
a31c0dcd 1594 system @more => $f;
151b83f8
PH
1595 }
1596 }
1597
1598 print "\n";
1599 for (;;)
1600 {
0df394b5
HSHR
1601 $_ = interact('Continue, Update & retry, Quit? [Q] ', $force_update, $force_continue);
1602 tests_exit(1) if /^q?$/;
a4ecb6a7
JH
1603 if (/^c$/ && $force_continue) {
1604 log_failure($log_failed_filename, $testno, $rf);
1605 log_test($log_summary_filename, $testno, 'F')
1606 }
1607 return 1 if /^c$/i;
151b83f8
PH
1608 last if (/^u$/i);
1609 }
1610 }
1611
2f8e6f30
HSHR
1612#### $_
1613
151b83f8
PH
1614# Control reaches here if either (a) there is a saved file ($sf), or (b) there
1615# was a request to create a saved file. First, create the munged file from any
1616# data that does exist.
1617
9edef117 1618open(MUNGED, '>', $mf) || tests_exit(-1, "Failed to open $mf: $!");
c9a55f6a 1619my($truncated) = munge($rf, $extra) if -e $rf;
4cc77633
HSHR
1620
1621# Append the raw server log, if it is non-empty
151b83f8
PH
1622if (defined $rsf && -e $rsf)
1623 {
1624 print MUNGED "\n******** SERVER ********\n";
c9a55f6a 1625 $truncated |= munge($rsf, $extra);
151b83f8
PH
1626 }
1627close(MUNGED);
1628
1629# If a saved file exists, do the comparison. There are two awkward cases:
1630#
1631# If "*** truncated ***" was found in the new file, it means that a log line
1632# was overlong, and truncated. The problem is that it may be truncated at
1633# different points on different systems, because of different user name
1634# lengths. We reload the file and the saved file, and remove lines from the new
1635# file that precede "*** truncated ***" until we reach one that matches the
1636# line that precedes it in the saved file.
1637#
1638# If $sortfile is set, we are dealing with a mainlog file where the deliveries
1639# for an individual message might vary in their order from system to system, as
1640# a result of parallel deliveries. We load the munged file and sort sequences
1641# of delivery lines.
1642
28e8a0f7 1643if (-e $sf_current)
151b83f8
PH
1644 {
1645 # Deal with truncated text items
1646
1647 if ($truncated)
1648 {
1649 my(@munged, @saved, $i, $j, $k);
1650
9edef117 1651 open(MUNGED, $mf) || tests_exit(-1, "Failed to open $mf: $!");
151b83f8
PH
1652 @munged = <MUNGED>;
1653 close(MUNGED);
28e8a0f7 1654 open(SAVED, $sf_current) || tests_exit(-1, "Failed to open $sf_current: $!");
151b83f8
PH
1655 @saved = <SAVED>;
1656 close(SAVED);
1657
1658 $j = 0;
1659 for ($i = 0; $i < @munged; $i++)
1660 {
1661 if ($munged[$i] =~ /\*\*\* truncated \*\*\*/)
1662 {
1663 for (; $j < @saved; $j++)
1664 { last if $saved[$j] =~ /\*\*\* truncated \*\*\*/; }
1665 last if $j >= @saved; # not found in saved
1666
1667 for ($k = $i - 1; $k >= 0; $k--)
1668 { last if $munged[$k] eq $saved[$j - 1]; }
1669
1670 last if $k <= 0; # failed to find previous match
1671 splice @munged, $k + 1, $i - $k - 1;
1672 $i = $k + 1;
1673 }
1674 }
1675
2dc4c388
HSHR
1676 open(my $fh, '>', $mf) or tests_exit(-1, "Failed to open $mf: $!");
1677 print $fh @munged;
151b83f8
PH
1678 }
1679
1680 # Deal with log sorting
1681
1682 if ($sortfile)
1683 {
151b83f8 1684
2dc4c388
HSHR
1685 my @munged = do {
1686 open(my $fh, '<', $mf) or tests_exit(-1, "Failed to open $mf: $!");
1687 <$fh>;
1688 };
151b83f8 1689
90d0db05 1690 for (my $i = 0; $i < @munged; $i++)
151b83f8
PH
1691 {
1692 if ($munged[$i] =~ /^[-\d]{10}\s[:\d]{8}\s[-A-Za-z\d]{16}\s[-=*]>/)
1693 {
90d0db05 1694 my $j;
151b83f8
PH
1695 for ($j = $i + 1; $j < @munged; $j++)
1696 {
1697 last if $munged[$j] !~
1698 /^[-\d]{10}\s[:\d]{8}\s[-A-Za-z\d]{16}\s[-=*]>/;
1699 }
1700 @temp = splice(@munged, $i, $j - $i);
1701 @temp = sort(@temp);
1702 splice(@munged, $i, 0, @temp);
1703 }
1704 }
1705
2dc4c388
HSHR
1706 open(my $fh, '>', $mf) or tests_exit(-1, "Failed to open $mf: $!");
1707 print $fh "**NOTE: The delivery lines in this file have been sorted.\n";
1708 print $fh @munged;
151b83f8
PH
1709 }
1710
1711 # Do the comparison
1712
28e8a0f7 1713 return 0 if (system("$cf '$mf' '$sf_current' >test-cf") == 0);
151b83f8
PH
1714
1715 # Handle comparison failure
1716
28e8a0f7 1717 print "** Comparison of $mf with $sf_current failed";
a31c0dcd 1718 system @more => 'test-cf';
151b83f8
PH
1719
1720 print "\n";
1721 for (;;)
1722 {
0df394b5
HSHR
1723 $_ = interact('Continue, Retry, Update current'
1724 . ($sf_current ne $sf_flavour ? "/Save for flavour '$flavour'" : '')
1725 . ' & retry, Quit? [Q] ', $force_update, $force_continue);
1726 tests_exit(1) if /^q?$/;
a4ecb6a7
JH
1727 if (/^c$/ && $force_continue) {
1728 log_failure($log_failed_filename, $testno, $sf_current);
1729 log_test($log_summary_filename, $testno, 'F')
1730 }
1731 return 1 if /^c$/i;
1732 return 2 if /^r$/i;
28e8a0f7 1733 last if (/^[us]$/i);
151b83f8
PH
1734 }
1735 }
1736
1737# Update or delete the saved file, and give the appropriate return code.
1738
1739if (-s $mf)
28e8a0f7 1740 {
a4ecb6a7
JH
1741 my $sf = /^u/i ? $sf_current : $sf_flavour;
1742 tests_exit(-1, "Failed to cp $mf $sf") if system("cp '$mf' '$sf'") != 0;
28e8a0f7 1743 }
151b83f8 1744else
28e8a0f7 1745 {
a4ecb6a7
JH
1746 # if we deal with a flavour file, we can't delete it, because next time the generic
1747 # file would be used again
1748 if ($sf_current eq $sf_flavour) {
2dc4c388 1749 open(my $fh, '>', $sf_current);
a4ecb6a7
JH
1750 }
1751 else {
1752 tests_exit(-1, "Failed to unlink $sf_current") if !unlink($sf_current);
1753 }
28e8a0f7 1754 }
151b83f8 1755
a4ecb6a7 1756return 2;
151b83f8
PH
1757}
1758
1759
1760
1761##################################################
c9a55f6a
JH
1762# Custom munges
1763# keyed by name of munge; value is a ref to a hash
1764# which is keyed by file, value a string to look for.
1765# Usable files are:
1766# paniclog, rejectlog, mainlog, stdout, stderr, msglog, mail
1767# Search strings starting with 's' do substitutions;
1768# with '/' do line-skips.
74377a62 1769# Triggered by a scriptfile line "munge <name>"
c9a55f6a
JH
1770##################################################
1771$munges =
1772 { 'dnssec' =>
cf407cb6 1773 { 'stderr' => '/^Reverse DNS security status: unverified\n/' },
c9a55f6a
JH
1774
1775 'gnutls_unexpected' =>
cf407cb6 1776 { 'mainlog' => '/\(recv\): A TLS packet with unexpected length was received./' },
c9a55f6a
JH
1777
1778 'gnutls_handshake' =>
cf407cb6 1779 { 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/' },
c9a55f6a 1780
8008accd
JH
1781 'gnutls_bad_clientcert' =>
1782 { 'mainlog' => 's/\(certificate verification failed\): certificate invalid/\(gnutls_handshake\): The peer did not send any certificate./',
1783 'stdout' => 's/Succeeded in starting TLS/A TLS fatal alert has been received.\nFailed to start TLS'
1784 },
1785
74377a62 1786 'optional_events' =>
cf407cb6 1787 { 'stdout' => '/event_action =/' },
74377a62
JH
1788
1789 'optional_ocsp' =>
cf407cb6
JH
1790 { 'stderr' => '/127.0.0.1 in hosts_requ(ire|est)_ocsp/' },
1791
79547a5a
JH
1792 'optional_cert_hostnames' =>
1793 { 'stderr' => '/in tls_verify_cert_hostnames\? no/' },
1794
ac9a0d91
JH
1795 'loopback' =>
1796 { 'stdout' => 's/[[](127\.0\.0\.1|::1)]/[IP_LOOPBACK_ADDR]/' },
1797
35deab6a
JH
1798 'scanfile_size' =>
1799 { 'stdout' => 's/(Content-length:) \d\d\d/$1 ddd/' },
1800
846430d9
JH
1801 'delay_1500' =>
1802 { 'stderr' => 's/(1[5-9]|23\d)\d\d msec/ssss msec/' },
1803
b3ef41c9 1804 'tls_anycipher' =>
8ac90765
JH
1805 { 'mainlog' => 's! X=TLS\S+ ! X=TLS_proto_and_cipher !;
1806 s! DN="C=! DN="/C=!;
1807 s! DN="[^,"]*\K,!/!;
1808 s! DN="[^,"]*\K,!/!;
1809 s! DN="[^,"]*\K,!/!;
1810 ',
1811 'rejectlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /',
8ac90765 1812 },
b3ef41c9 1813
ae9d18bc 1814 'debug_pid' =>
bf24ce50 1815 { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d+/ppppp/g' },
ae9d18bc 1816
d658adda
JH
1817 'optional_dsn_info' =>
1818 { 'mail' => '/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/'
6636495c
JH
1819 },
1820
06685b44 1821 'optional_config' =>
4dce3152 1822 { 'stdout' => '/^(
2bc0f45e 1823 dkim_(canon|domain|private_key|selector|sign_headers|strict|hash|identity|timestamps)
4dce3152 1824 |gnutls_require_(kx|mac|protocols)
ee8b8090 1825 |hosts_pipe_connect
4dce3152 1826 |hosts_(requ(est|ire)|try)_(dane|ocsp)
295bebda 1827 |dane_require_tls_ciphers
c3161b1d 1828 |hosts_(avoid|nopass|noproxy|require|verify_avoid)_tls
ee8b8090 1829 |pipelining_connect_advertise_hosts
06685b44 1830 |socks_proxy
4dce3152 1831 |tls_[^ ]*
71c15846 1832 |utf8_downconvert
c3161b1d
JH
1833 )($|[ ]=)/x'
1834 },
79c904e1 1835
6636495c 1836 'sys_bindir' =>
7329ca93 1837 { 'mainlog' => 's%/(usr/(local/)?)?bin/%SYSBINDIR/%' },
d658adda 1838
a0418528
JH
1839 'sync_check_data' =>
1840 { 'mainlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/',
1841 'rejectlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/'},
1842
b0d68adc 1843 'debuglog_stdout' =>
398f9af3 1844 { 'stdout' => 's/^\d\d:\d\d:\d\d\s+\d+ //;
b0d68adc
JH
1845 s/Process \d+ is ready for new message/Process pppp is ready for new message/'
1846 },
74ba91b1
JH
1847
1848 'timeout_errno' => # actual errno differs Solaris vs. Linux
78598e6a 1849 { 'mainlog' => 's/((?:host|message) deferral .* errno) <\d+> /$1 <EEE> /' },
d0eb2d45
JH
1850
1851 'peer_terminated_conn' => # actual error differs FreedBSD vs. Linux
1852 { 'stderr' => 's/^( SMTP\()Connection reset by peer(\)<<)$/$1closed$2/' },
c3161b1d 1853
2566035f
JH
1854 'perl_variants' => # result of hash-in-scalar-context changed from bucket-fill to keycount
1855 { 'stdout' => 's%^> X/X$%> X%' },
c9a55f6a
JH
1856 };
1857
1858
a4ecb6a7
JH
1859sub max {
1860 my ($a, $b) = @_;
1861 return $a if ($a > $b);
1862 return $b;
1863}
1864
c9a55f6a 1865##################################################
151b83f8
PH
1866# Subroutine to check the output of a test #
1867##################################################
1868
1869# This function is called when the series of subtests is complete. It makes
c9a55f6a 1870# use of check_file(), whose arguments are:
151b83f8
PH
1871#
1872# [0] the name of the main raw output file
1873# [1] the name of the server raw output file or undef
1874# [2] where to put the munged copy
1875# [3] the name of the saved file
1876# [4] TRUE if this is a log file whose deliveries must be sorted
c9a55f6a 1877# [5] an optional custom munge command
151b83f8 1878#
ac9a0d91 1879# Arguments: Optionally, name of a single custom munge to run.
151b83f8 1880# Returns: 0 if the output compared equal
a4ecb6a7
JH
1881# 1 if comparison failed; differences to be ignored
1882# 2 if re-run needed (files may have been updated)
151b83f8
PH
1883
1884sub check_output{
c9a55f6a 1885my($mungename) = $_[0];
151b83f8 1886my($yield) = 0;
c9a55f6a 1887my($munge) = $munges->{$mungename} if defined $mungename;
151b83f8 1888
a4ecb6a7 1889$yield = max($yield, check_file("spool/log/paniclog",
151b83f8
PH
1890 "spool/log/serverpaniclog",
1891 "test-paniclog-munged",
c9a55f6a 1892 "paniclog/$testno", 0,
a4ecb6a7 1893 $munge->{paniclog}));
151b83f8 1894
a4ecb6a7 1895$yield = max($yield, check_file("spool/log/rejectlog",
151b83f8
PH
1896 "spool/log/serverrejectlog",
1897 "test-rejectlog-munged",
c9a55f6a 1898 "rejectlog/$testno", 0,
a4ecb6a7 1899 $munge->{rejectlog}));
151b83f8 1900
a4ecb6a7 1901$yield = max($yield, check_file("spool/log/mainlog",
151b83f8
PH
1902 "spool/log/servermainlog",
1903 "test-mainlog-munged",
c9a55f6a 1904 "log/$testno", $sortlog,
a4ecb6a7 1905 $munge->{mainlog}));
151b83f8
PH
1906
1907if (!$stdout_skip)
1908 {
a4ecb6a7 1909 $yield = max($yield, check_file("test-stdout",
151b83f8
PH
1910 "test-stdout-server",
1911 "test-stdout-munged",
c9a55f6a 1912 "stdout/$testno", 0,
a4ecb6a7 1913 $munge->{stdout}));
151b83f8
PH
1914 }
1915
1916if (!$stderr_skip)
1917 {
a4ecb6a7 1918 $yield = max($yield, check_file("test-stderr",
151b83f8
PH
1919 "test-stderr-server",
1920 "test-stderr-munged",
c9a55f6a 1921 "stderr/$testno", 0,
a4ecb6a7 1922 $munge->{stderr}));
151b83f8
PH
1923 }
1924
1925# Compare any delivered messages, unless this test is skipped.
1926
1927if (! $message_skip)
1928 {
1929 my($msgno) = 0;
1930
1931 # Get a list of expected mailbox files for this script. We don't bother with
1932 # directories, just the files within them.
1933
1934 foreach $oldmail (@oldmails)
1935 {
1936 next unless $oldmail =~ /^mail\/$testno\./;
1937 print ">> EXPECT $oldmail\n" if $debug;
1938 $expected_mails{$oldmail} = 1;
1939 }
1940
1941 # If there are any files in test-mail, compare them. Note that "." and
1942 # ".." are automatically omitted by list_files_below().
1943
1944 @mails = list_files_below("test-mail");
1945
1946 foreach $mail (@mails)
1947 {
1948 next if $mail eq "test-mail/oncelog";
1949
1950 $saved_mail = substr($mail, 10); # Remove "test-mail/"
1951 $saved_mail =~ s/^$parm_caller(\/|$)/CALLER/; # Convert caller name
1952
1953 if ($saved_mail =~ /(\d+\.[^.]+\.)/)
1954 {
1955 $msgno++;
1956 $saved_mail =~ s/(\d+\.[^.]+\.)/$msgno./gx;
1957 }
1958
1959 print ">> COMPARE $mail mail/$testno.$saved_mail\n" if $debug;
a4ecb6a7 1960 $yield = max($yield, check_file($mail, undef, "test-mail-munged",
c9a55f6a 1961 "mail/$testno.$saved_mail", 0,
a4ecb6a7 1962 $munge->{mail}));
151b83f8
PH
1963 delete $expected_mails{"mail/$testno.$saved_mail"};
1964 }
1965
1966 # Complain if not all expected mails have been found
1967
1968 if (scalar(keys %expected_mails) != 0)
1969 {
1970 foreach $key (keys %expected_mails)
1971 { print "** no test file found for $key\n"; }
1972
1973 for (;;)
1974 {
0df394b5
HSHR
1975 $_ = interact('Continue, Update & retry, or Quit? [Q] ', $force_update, $force_continue);
1976 tests_exit(1) if /^q?$/;
a4ecb6a7
JH
1977 if (/^c$/ && $force_continue) {
1978 log_failure($log_failed_filename, $testno, "missing email");
1979 log_test($log_summary_filename, $testno, 'F')
1980 }
0df394b5 1981 last if /^c$/;
151b83f8
PH
1982
1983 # For update, we not only have to unlink the file, but we must also
1984 # remove it from the @oldmails vector, as otherwise it will still be
1985 # checked for when we re-run the test.
1986
0df394b5 1987 if (/^u$/)
151b83f8
PH
1988 {
1989 foreach $key (keys %expected_mails)
1990 {
1991 my($i);
1992 tests_exit(-1, "Failed to unlink $key") if !unlink("$key");
1993 for ($i = 0; $i < @oldmails; $i++)
1994 {
1995 if ($oldmails[$i] eq $key)
1996 {
1997 splice @oldmails, $i, 1;
1998 last;
1999 }
2000 }
2001 }
2002 last;
2003 }
2004 }
2005 }
2006 }
2007
2008# Compare any remaining message logs, unless this test is skipped.
2009
2010if (! $msglog_skip)
2011 {
2012 # Get a list of expected msglog files for this test
2013
2014 foreach $oldmsglog (@oldmsglogs)
2015 {
2016 next unless $oldmsglog =~ /^$testno\./;
2017 $expected_msglogs{$oldmsglog} = 1;
2018 }
2019
2020 # If there are any files in spool/msglog, compare them. However, we have
2021 # to munge the file names because they are message ids, which are
2022 # time dependent.
2023
2024 if (opendir(DIR, "spool/msglog"))
2025 {
2026 @msglogs = sort readdir(DIR);
2027 closedir(DIR);
2028
2029 foreach $msglog (@msglogs)
2030 {
2031 next if ($msglog eq "." || $msglog eq ".." || $msglog eq "CVS");
2032 ($munged_msglog = $msglog) =~
2033 s/((?:[^\W_]{6}-){2}[^\W_]{2})
2034 /new_value($1, "10Hm%s-0005vi-00", \$next_msgid)/egx;
a4ecb6a7 2035 $yield = max($yield, check_file("spool/msglog/$msglog", undef,
c9a55f6a 2036 "test-msglog-munged", "msglog/$testno.$munged_msglog", 0,
a4ecb6a7 2037 $munge->{msglog}));
151b83f8
PH
2038 delete $expected_msglogs{"$testno.$munged_msglog"};
2039 }
2040 }
2041
2042 # Complain if not all expected msglogs have been found
2043
2044 if (scalar(keys %expected_msglogs) != 0)
2045 {
2046 foreach $key (keys %expected_msglogs)
2047 {
2048 print "** no test msglog found for msglog/$key\n";
2049 ($msgid) = $key =~ /^\d+\.(.*)$/;
2050 foreach $cachekey (keys %cache)
2051 {
2052 if ($cache{$cachekey} eq $msgid)
2053 {
2054 print "** original msgid $cachekey\n";
2055 last;
2056 }
2057 }
2058 }
2059
2060 for (;;)
2061 {
0df394b5
HSHR
2062 $_ = interact('Continue, Update, or Quit? [Q] ', $force_update, $force_continue);
2063 tests_exit(1) if /^q?$/;
a4ecb6a7
JH
2064 if (/^c$/ && $force_continue) {
2065 log_failure($log_failed_filename, $testno, "missing msglog");
2066 log_test($log_summary_filename, $testno, 'F')
2067 }
0df394b5
HSHR
2068 last if /^c$/;
2069 if (/^u$/)
151b83f8
PH
2070 {
2071 foreach $key (keys %expected_msglogs)
2072 {
2073 tests_exit(-1, "Failed to unlink msglog/$key")
2074 if !unlink("msglog/$key");
2075 }
2076 last;
2077 }
2078 }
2079 }
2080 }
2081
2082return $yield;
2083}
2084
2085
2086
2087##################################################
2088# Subroutine to run one "system" command #
2089##################################################
2090
2091# We put this in a subroutine so that the command can be reflected when
2092# debugging.
2093#
2094# Argument: the command to be run
2095# Returns: nothing
2096
2097sub run_system {
050514b5
JH
2098my($cmd) = $_[0];
2099if ($debug)
2100 {
2101 my($prcmd) = $cmd;
2102 $prcmd =~ s/; /;\n>> /;
2103 print ">> $prcmd\n";
2104 }
2105system("$cmd");
151b83f8
PH
2106}
2107
2108
2109
2110##################################################
2111# Subroutine to run one script command #
2112##################################################
2113
2114# The <SCRIPT> file is open for us to read an optional return code line,
2115# followed by the command line and any following data lines for stdin. The
2116# command line can be continued by the use of \. Data lines are not continued
4c04137d 2117# in this way. In all lines, the following substitutions are made:
151b83f8
PH
2118#
2119# DIR => the current directory
2120# CALLER => the caller of this script
2121#
2122# Arguments: the current test number
2123# reference to the subtest number, holding previous value
2124# reference to the expected return code value
2125# reference to where to put the command name (for messages)
4c04137d 2126# auxiliary information returned from a previous run
151b83f8 2127#
4c04137d 2128# Returns: 0 the command was executed inline, no subprocess was run
151b83f8
PH
2129# 1 a non-exim command was run and waited for
2130# 2 an exim command was run and waited for
2131# 3 a command was run and not waited for (daemon, server, exim_lock)
2132# 4 EOF was encountered after an initial return code line
4c04137d 2133# Optionally also a second parameter, a hash-ref, with auxiliary information:
1ca9f507 2134# exim_pid: pid of a run process
c9a55f6a 2135# munge: name of a post-script results munger
151b83f8
PH
2136
2137sub run_command{
2138my($testno) = $_[0];
2139my($subtestref) = $_[1];
2140my($commandnameref) = $_[3];
1ca9f507 2141my($aux_info) = $_[4];
151b83f8
PH
2142my($yield) = 1;
2143
bc3c7bb7
HSHR
2144our %ENV = map { $_ => $ENV{$_} } grep { /^(?:USER|SHELL|PATH|TERM|EXIM_TEST_.*)$/ } keys %ENV;
2145
151b83f8
PH
2146if (/^(\d+)\s*$/) # Handle unusual return code
2147 {
2148 my($r) = $_[2];
2149 $$r = $1 << 8;
2150 $_ = <SCRIPT>;
2151 return 4 if !defined $_; # Missing command
2152 $lineno++;
2153 }
2154
2155chomp;
2156$wait_time = 0;
2157
2158# Handle concatenated command lines
2159
2160s/\s+$//;
2161while (substr($_, -1) eq"\\")
2162 {
2163 my($temp);
2164 $_ = substr($_, 0, -1);
2165 chomp($temp = <SCRIPT>);
2166 if (defined $temp)
2167 {
2168 $lineno++;
2169 $temp =~ s/\s+$//;
2170 $temp =~ s/^\s+//;
2171 $_ .= $temp;
2172 }
2173 }
2174
2175# Do substitutions
2176
2177do_substitute($testno);
2178if ($debug) { printf ">> $_\n"; }
2179
2180# Pass back the command name (for messages)
2181
2182($$commandnameref) = /^(\S+)/;
2183
2184# Here follows code for handling the various different commands that are
2185# supported by this script. The first group of commands are all freestanding
2186# in that they share no common code and are not followed by any data lines.
2187
2188
2189###################
2190###################
2191
2192# The "dbmbuild" command runs exim_dbmbuild. This is used both to test the
2193# utility and to make DBM files for testing DBM lookups.
2194
2195if (/^dbmbuild\s+(\S+)\s+(\S+)/)
2196 {
2197 run_system("(./eximdir/exim_dbmbuild $parm_cwd/$1 $parm_cwd/$2;" .
2198 "echo exim_dbmbuild exit code = \$?)" .
2199 ">>test-stdout");
2200 return 1;
2201 }
2202
2203
2204# The "dump" command runs exim_dumpdb. On different systems, the output for
2205# some types of dump may appear in a different order because it's just hauled
2206# out of the DBM file. We can solve this by sorting. Ignore the leading
2207# date/time, as it will be flattened later during munging.
2208
2209if (/^dump\s+(\S+)/)
2210 {
2dc4c388 2211 my $which = $1;
151b83f8 2212 print ">> ./eximdir/exim_dumpdb $parm_cwd/spool $which\n" if $debug;
2dc4c388
HSHR
2213 open(my $in, "-|", './eximdir/exim_dumpdb', "$parm_cwd/spool", $which) or die "Can't run exim_dumpdb: $!";
2214 open(my $out, ">>test-stdout");
2215 print $out "+++++++++++++++++++++++++++\n";
a0ff7619
JH
2216
2217 if ($which eq "retry")
151b83f8 2218 {
3b90b1d1
HSHR
2219 # the sort key is the first part of the retry db dump line, but for
2220 # sorting we (temporarly) replace the own hosts ipv4 with a munged
2221 # version, which matches the munging that is done later
2222 # Why? We must ensure sure, that 127.0.0.1 always sorts first
2223 # map-sort-map: Schwartz's transformation
84b1b277 2224 # test 0099
3b90b1d1
HSHR
2225 my @temp = map { $_->[1] }
2226 sort { $a->[0] cmp $b->[0] }
84b1b277
HSHR
2227 #map { [ (split)[0] =~ s/\Q$parm_ipv4/ip4.ip4.ip4.ip4/gr, $_ ] } # this is too modern for 5.10.1
2228 map {
2229 (my $k = (split)[0]) =~ s/\Q$parm_ipv4/ip4.ip4.ip4.ip4/g;
2230 [ $k, $_ ]
2231 }
3b90b1d1 2232 do { local $/ = "\n "; <$in> };
a0ff7619
JH
2233 foreach $item (@temp)
2234 {
7f8794a2 2235 $item =~ s/^\s*(.*)\n(.*)\n?\s*$/$1\n$2/m;
2dc4c388 2236 print $out " $item\n";
a0ff7619 2237 }
151b83f8 2238 }
a0ff7619
JH
2239 else
2240 {
2dc4c388 2241 my @temp = <$in>;
a0ff7619
JH
2242 if ($which eq "callout")
2243 {
2244 @temp = sort {
2245 my($aa) = substr $a, 21;
2246 my($bb) = substr $b, 21;
2247 return $aa cmp $bb;
2248 } @temp;
2249 }
2dc4c388 2250 print $out @temp;
a0ff7619 2251 }
2dc4c388 2252 close($in); # close it explicitly, otherwise $? does not get set
151b83f8
PH
2253 return 1;
2254 }
2255
2256
4cc77633
HSHR
2257# verbose comments start with ###
2258if (/^###\s/) {
2259 for my $file (qw(test-stdout test-stderr test-stderr-server test-stdout-server)) {
2260 open my $fh, '>>', $file or die "Can't open >>$file: $!\n";
2261 say {$fh} $_;
2262 }
2263 return 0;
2264}
151b83f8 2265
9edef117 2266# The "echo" command is a way of writing comments to the screen.
151b83f8
PH
2267if (/^echo\s+(.*)$/)
2268 {
2269 print "$1\n";
2270 return 0;
2271 }
2272
2273
2274# The "exim_lock" command runs exim_lock in the same manner as "server",
2275# but it doesn't use any input.
2276
2277if (/^exim_lock\s+(.*)$/)
2278 {
2279 $cmd = "./eximdir/exim_lock $1 >>test-stdout";
2280 $server_pid = open SERVERCMD, "|$cmd" ||
2281 tests_exit(-1, "Failed to run $cmd\n");
2282
2283 # This gives the process time to get started; otherwise the next
2284 # process may not find it there when it expects it.
2285
6588a918 2286 select(undef, undef, undef, 0.1);
151b83f8
PH
2287 return 3;
2288 }
2289
2290
2291# The "exinext" command runs exinext
2292
2293if (/^exinext\s+(.*)/)
2294 {
2295 run_system("(./eximdir/exinext " .
2296 "-DEXIM_PATH=$parm_cwd/eximdir/exim " .
2297 "-C $parm_cwd/test-config $1;" .
2298 "echo exinext exit code = \$?)" .
2299 ">>test-stdout");
2300 return 1;
2301 }
2302
2303
f3f065bb
PH
2304# The "exigrep" command runs exigrep on the current mainlog
2305
2306if (/^exigrep\s+(.*)/)
2307 {
2308 run_system("(./eximdir/exigrep " .
2309 "$1 $parm_cwd/spool/log/mainlog;" .
2310 "echo exigrep exit code = \$?)" .
2311 ">>test-stdout");
2312 return 1;
2313 }
2314
2315
2316# The "eximstats" command runs eximstats on the current mainlog
2317
2318if (/^eximstats\s+(.*)/)
2319 {
2320 run_system("(./eximdir/eximstats " .
2321 "$1 $parm_cwd/spool/log/mainlog;" .
2322 "echo eximstats exit code = \$?)" .
2323 ">>test-stdout");
2324 return 1;
2325 }
2326
2327
151b83f8
PH
2328# The "gnutls" command makes a copy of saved GnuTLS parameter data in the
2329# spool directory, to save Exim from re-creating it each time.
2330
2331if (/^gnutls/)
2332 {
83e2f8a2
PP
2333 my $gen_fn = "spool/gnutls-params-$gnutls_dh_bits_normal";
2334 run_system "sudo cp -p aux-fixed/gnutls-params $gen_fn;" .
2335 "sudo chown $parm_eximuser:$parm_eximgroup $gen_fn;" .
2336 "sudo chmod 0400 $gen_fn";
151b83f8
PH
2337 return 1;
2338 }
2339
2340
2341# The "killdaemon" command should ultimately follow the starting of any Exim
2f2dd3a5 2342# daemon with the -bd option.
151b83f8
PH
2343
2344if (/^killdaemon/)
2345 {
1ca9f507
PP
2346 my $return_extra = {};
2347 if (exists $aux_info->{exim_pid})
2348 {
2349 $pid = $aux_info->{exim_pid};
2350 $return_extra->{exim_pid} = undef;
2351 print ">> killdaemon: recovered pid $pid\n" if $debug;
3ff2360f
JH
2352 if ($pid)
2353 {
2f2dd3a5 2354 run_system("sudo /bin/kill -TERM $pid");
3ff2360f
JH
2355 wait;
2356 }
1ca9f507
PP
2357 } else {
2358 $pid = `cat $parm_cwd/spool/exim-daemon.*`;
3ff2360f
JH
2359 if ($pid)
2360 {
2f2dd3a5 2361 run_system("sudo /bin/kill -TERM $pid");
3ff2360f
JH
2362 close DAEMONCMD; # Waits for process
2363 }
1ca9f507 2364 }
3ff2360f 2365 run_system("sudo /bin/rm -f spool/exim-daemon.*");
1ca9f507 2366 return (1, $return_extra);
151b83f8
PH
2367 }
2368
2369
2370# The "millisleep" command is like "sleep" except that its argument is in
2371# milliseconds, thus allowing for a subsecond sleep, which is, in fact, all it
2372# is used for.
2373
2374elsif (/^millisleep\s+(.*)$/)
2375 {
2376 select(undef, undef, undef, $1/1000);
2377 return 0;
2378 }
2379
2380
c9a55f6a 2381# The "munge" command selects one of a hardwired set of test-result modifications
aded2255 2382# to be made before result compares are run against the golden set. This lets
c9a55f6a
JH
2383# us account for test-system dependent things which only affect a few, but known,
2384# test-cases.
2385# Currently only the last munge takes effect.
2386
2387if (/^munge\s+(.*)$/)
2388 {
2389 return (0, { munge => $1 });
2390 }
2391
2392
151b83f8
PH
2393# The "sleep" command does just that. For sleeps longer than 1 second we
2394# tell the user what's going on.
2395
2396if (/^sleep\s+(.*)$/)
2397 {
2398 if ($1 == 1)
2399 {
2400 sleep(1);
2401 }
2402 else
2403 {
2404 printf(" Test %d sleep $1 ", $$subtestref);
2405 for (1..$1)
2406 {
2407 print ".";
2408 sleep(1);
2409 }
2410 printf("\r Test %d $cr", $$subtestref);
2411 }
2412 return 0;
2413 }
2414
2415
2416# Various Unix management commands are recognized
2417
21c28500 2418if (/^(ln|ls|du|mkdir|mkfifo|touch|cp|cat)\s/ ||
4e192008 2419 /^sudo\s(rmdir|rm|mv|chown|chmod)\s/)
151b83f8
PH
2420 {
2421 run_system("$_ >>test-stdout 2>>test-stderr");
2422 return 1;
2423 }
2424
2425
2426
2427###################
2428###################
2429
2430# The next group of commands are also freestanding, but they are all followed
2431# by data lines.
2432
2433
2434# The "server" command starts up a script-driven server that runs in parallel
2435# with the following exim command. Therefore, we want to run a subprocess and
2436# not yet wait for it to complete. The waiting happens after the next exim
2437# command, triggered by $server_pid being non-zero. The server sends its output
2438# to a different file. The variable $server_opts, if not empty, contains
2439# options to disable IPv4 or IPv6 if necessary.
b9d9c5a2 2440# This works because "server" swallows its stdin before waiting for a connection.
151b83f8
PH
2441
2442if (/^server\s+(.*)$/)
2443 {
f41e0506
JH
2444 $pidfile = "$parm_cwd/aux-var/server-daemon.pid";
2445 $cmd = "./bin/server $server_opts -oP $pidfile $1 >>test-stdout-server";
151b83f8
PH
2446 print ">> $cmd\n" if ($debug);
2447 $server_pid = open SERVERCMD, "|$cmd" || tests_exit(-1, "Failed to run $cmd");
2448 SERVERCMD->autoflush(1);
2449 print ">> Server pid is $server_pid\n" if $debug;
2450 while (<SCRIPT>)
2451 {
2452 $lineno++;
2453 last if /^\*{4}\s*$/;
2454 print SERVERCMD;
2455 }
2456 print SERVERCMD "++++\n"; # Send end to server; can't send EOF yet
2457 # because close() waits for the process.
2458
f41e0506 2459 # Interlock the server startup; otherwise the next
151b83f8 2460 # process may not find it there when it expects it.
f41e0506 2461 while (! stat("$pidfile") ) { select(undef, undef, undef, 0.3); }
151b83f8
PH
2462 return 3;
2463 }
2464
2465
2466# The "write" command is a way of creating files of specific sizes for
2467# buffering tests, or containing specific data lines from within the script
2468# (rather than hold lots of little files). The "catwrite" command does the
2469# same, but it also copies the lines to test-stdout.
2470
2471if (/^(cat)?write\s+(\S+)(?:\s+(.*))?\s*$/)
2472 {
2473 my($cat) = defined $1;
2474 @sizes = ();
2475 @sizes = split /\s+/, $3 if defined $3;
2476 open FILE, ">$2" || tests_exit(-1, "Failed to open \"$2\": $!");
2477
2478 if ($cat)
2479 {
2480 open CAT, ">>test-stdout" ||
2481 tests_exit(-1, "Failed to open test-stdout: $!");
2482 print CAT "==========\n";
2483 }
2484
2485 if (scalar @sizes > 0)
2486 {
2487 # Pre-data
2488
2489 while (<SCRIPT>)
2490 {
2491 $lineno++;
2492 last if /^\+{4}\s*$/;
2493 print FILE;
2494 print CAT if $cat;
2495 }
2496
2497 # Sized data
2498
2499 while (scalar @sizes > 0)
2500 {
2501 ($count,$len,$leadin) = (shift @sizes) =~ /(\d+)x(\d+)(?:=(.*))?/;
9a8a6839 2502 $leadin = '' if !defined $leadin;
151b83f8
PH
2503 $leadin =~ s/_/ /g;
2504 $len -= length($leadin) + 1;
2505 while ($count-- > 0)
2506 {
2507 print FILE $leadin, "a" x $len, "\n";
2508 print CAT $leadin, "a" x $len, "\n" if $cat;
2509 }
2510 }
2511 }
2512
2513 # Post data, or only data if no sized data
2514
2515 while (<SCRIPT>)
2516 {
2517 $lineno++;
2518 last if /^\*{4}\s*$/;
2519 print FILE;
2520 print CAT if $cat;
2521 }
2522 close FILE;
2523
2524 if ($cat)
2525 {
2526 print CAT "==========\n";
2527 close CAT;
2528 }
2529
2530 return 0;
2531 }
2532
2533
2534###################
2535###################
2536
2537# From this point on, script commands are implemented by setting up a shell
2538# command in the variable $cmd. Shared code to run this command and handle its
2539# input and output follows.
2540
cfc54830
PH
2541# The "client", "client-gnutls", and "client-ssl" commands run a script-driven
2542# program that plays the part of an email client. We also have the availability
2543# of running Perl for doing one-off special things. Note that all these
2544# commands expect stdin data to be supplied.
151b83f8 2545
cfc54830 2546if (/^client/ || /^(sudo\s+)?perl\b/)
151b83f8
PH
2547 {
2548 s"client"./bin/client";
2549 $cmd = "$_ >>test-stdout 2>>test-stderr";
2550 }
2551
2552# For the "exim" command, replace the text "exim" with the path for the test
2553# binary, plus -D options to pass over various parameters, and a -C option for
2554# the testing configuration file. When running in the test harness, Exim does
2555# not drop privilege when -C and -D options are present. To run the exim
2556# command as root, we use sudo.
2557
bc3c7bb7 2558elsif (/^((?i:[A-Z\d_]+=\S+\s+)+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+)?\s+(.*)$/)
151b83f8 2559 {
4c7220eb 2560 $args = $6;
9a8a6839
HSHR
2561 my($envset) = (defined $1)? $1 : '';
2562 my($sudo) = (defined $3)? "sudo " . (defined $4 ? "-u $4 ":'') : '';
2563 my($special)= (defined $5)? $5 : '';
151b83f8
PH
2564 $wait_time = (defined $2)? $2 : 0;
2565
2566 # Return 2 rather than 1 afterwards
2567
2568 $yield = 2;
2569
2570 # Update the test number
2571
2572 $$subtestref = $$subtestref + 1;
2573 printf(" Test %d $cr", $$subtestref);
2574
2575 # Copy the configuration file, making the usual substitutions.
2576
2577 open (IN, "$parm_cwd/confs/$testno") ||
2578 tests_exit(-1, "Couldn't open $parm_cwd/confs/$testno: $!\n");
2579 open (OUT, ">test-config") ||
2580 tests_exit(-1, "Couldn't open test-config: $!\n");
2581 while (<IN>)
2582 {
2583 do_substitute($testno);
2584 print OUT;
2585 }
2586 close(IN);
2587 close(OUT);
2588
2589 # The string $msg1 in args substitutes the message id of the first
2590 # message on the queue, and so on. */
2591
2592 if ($args =~ /\$msg/)
2593 {
fc7bae7f
JH
2594 my($queuespec);
2595 if ($args =~ /-qG\w+/) { $queuespec = $&; }
2596
2597 my @listcmd;
2598
2599 if (defined $queuespec)
2600 {
2601 @listcmd = ("$parm_cwd/eximdir/exim", '-bp',
2602 $queuespec,
562a0e6f
HSHR
2603 "-DEXIM_PATH=$parm_cwd/eximdir/exim",
2604 -C => "$parm_cwd/test-config");
fc7bae7f
JH
2605 }
2606 else
2607 {
2608 @listcmd = ("$parm_cwd/eximdir/exim", '-bp',
2609 "-DEXIM_PATH=$parm_cwd/eximdir/exim",
2610 -C => "$parm_cwd/test-config");
2611 }
562a0e6f 2612 print ">> Getting queue list from:\n>> @listcmd\n" if $debug;
b402f294
HSHR
2613 # We need the message ids sorted in ascending order.
2614 # Message id is: <timestamp>-<pid>-<fractional-time>. On some systems (*BSD) the
2615 # PIDs are randomized, so sorting just the whole PID doesn't work.
2616 # We do the Schartz' transformation here (sort on
2617 # <timestamp><fractional-time>). Thanks to Kirill Miazine
562a0e6f
HSHR
2618 my @msglist =
2619 map { $_->[1] } # extract the values
2620 sort { $a->[0] cmp $b->[0] } # sort by key
2621 map { [join('.' => (split /-/, $_)[0,2]) => $_] } # key (timestamp.fractional-time) => value(message_id)
2622 map { /^\s*\d+[smhdw]\s+\S+\s+(\S+)/ } `@listcmd` or tests_exit(-1, "No output from `exim -bp` (@listcmd)\n");
151b83f8
PH
2623
2624 # Done backwards just in case there are more than 9
2625
25adc2a8 2626 for (my $i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
3ff2360f
JH
2627 if ( $args =~ /\$msg\d/ )
2628 {
8334b9b8
TL
2629 tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n")
2630 unless $force_continue;
3ff2360f 2631 }
151b83f8
PH
2632 }
2633
2634 # If -d is specified in $optargs, remove it from $args; i.e. let
2635 # the command line for runtest override. Then run Exim.
2636
2637 $args =~ s/(?:^|\s)-d\S*// if $optargs =~ /(?:^|\s)-d/;
2638
9a8a6839 2639 my $opt_valgrind = $valgrind ? "valgrind --leak-check=yes --suppressions=$parm_cwd/aux-fixed/valgrind.supp " : '';
2c9f7ff8
JH
2640
2641 $cmd = "$envset$sudo$opt_valgrind" .
2642 "$parm_cwd/eximdir/exim$special$optargs " .
151b83f8
PH
2643 "-DEXIM_PATH=$parm_cwd/eximdir/exim$special " .
2644 "-C $parm_cwd/test-config $args " .
2645 ">>test-stdout 2>>test-stderr";
151b83f8
PH
2646 # If the command is starting an Exim daemon, we run it in the same
2647 # way as the "server" command above, that is, we don't want to wait
2648 # for the process to finish. That happens when "killdaemon" is obeyed later
2649 # in the script. We also send the stderr output to test-stderr-server. The
2650 # daemon has its log files put in a different place too (by configuring with
2651 # log_file_path). This requires the directory to be set up in advance.
2652 #
2653 # There are also times when we want to run a non-daemon version of Exim
2654 # (e.g. a queue runner) with the server configuration. In this case,
2655 # we also define -DNOTDAEMON.
2656
2657 if ($cmd =~ /\s-DSERVER=server\s/ && $cmd !~ /\s-DNOTDAEMON\s/)
2658 {
2659 if ($debug) { printf ">> daemon: $cmd\n"; }
050514b5 2660 run_system("sudo mkdir spool/log 2>/dev/null");
151b83f8
PH
2661 run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
2662
2663 # Before running the command, convert the -bd option into -bdf so that an
2664 # Exim daemon doesn't double fork. This means that when we wait close
1b781f48
PH
2665 # DAEMONCMD, it waits for the correct process. Also, ensure that the pid
2666 # file is written to the spool directory, in case the Exim binary was
2667 # built with PID_FILE_PATH pointing somewhere else.
151b83f8 2668
f41e0506
JH
2669 if ($cmd =~ /\s-oP\s/)
2670 {
2671 ($pidfile = $cmd) =~ s/^.*-oP ([^ ]+).*$/$1/;
2672 $cmd =~ s!\s-bd\s! -bdf !;
2673 }
2674 else
2675 {
2676 $pidfile = "$parm_cwd/spool/exim-daemon.pid";
2677 $cmd =~ s!\s-bd\s! -bdf -oP $pidfile !;
2678 }
151b83f8
PH
2679 print ">> |${cmd}-server\n" if ($debug);
2680 open DAEMONCMD, "|${cmd}-server" || tests_exit(-1, "Failed to run $cmd");
2681 DAEMONCMD->autoflush(1);
2682 while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; } # Ignore any input
f41e0506
JH
2683
2684 # Interlock with daemon startup
109b7eb1
JH
2685 for (my $count = 0; ! stat("$pidfile") && $count < 30; $count++ )
2686 { select(undef, undef, undef, 0.3); }
151b83f8
PH
2687 return 3; # Don't wait
2688 }
1ca9f507
PP
2689 elsif ($cmd =~ /\s-DSERVER=wait:(\d+)\s/)
2690 {
df613eb4
HSHR
2691
2692 # The port and the $dynamic_socket was already allocated while parsing the
2693 # script file, where -DSERVER=wait:PORT_DYNAMIC was encountered.
2694
1ca9f507
PP
2695 my $listen_port = $1;
2696 if ($debug) { printf ">> wait-mode daemon: $cmd\n"; }
050514b5 2697 run_system("sudo mkdir spool/log 2>/dev/null");
1ca9f507
PP
2698 run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
2699
1ca9f507
PP
2700 my $pid = fork();
2701 if (not defined $pid) { die "** fork failed: $!\n" }
2702 if (not $pid) {
2703 close(STDIN);
df613eb4
HSHR
2704 open(STDIN, '<&', $dynamic_socket) or die "** dup sock to stdin failed: $!\n";
2705 close($dynamic_socket);
1ca9f507
PP
2706 print "[$$]>> ${cmd}-server\n" if ($debug);
2707 exec "exec ${cmd}-server";
df613eb4 2708 die "Can't exec ${cmd}-server: $!\n";
1ca9f507
PP
2709 }
2710 while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; } # Ignore any input
2711 select(undef, undef, undef, 0.3); # Let the daemon get going
2712 return (3, { exim_pid => $pid }); # Don't wait
2713 }
151b83f8
PH
2714 }
2715
bdf36f7c
JH
2716# The "background" command is run but not waited-for, like exim -DSERVER=server.
2717# One script line is read and fork-exec'd. The PID is stored for a later
2718# killdaemon.
2719
2720elsif (/^background$/)
2721 {
2722 my $line;
2723# $pidfile = "$parm_cwd/aux-var/server-daemon.pid";
2724
2725 $_ = <SCRIPT>; $lineno++;
2726 chomp;
de1294ea 2727 do_substitute($testno);
bdf36f7c
JH
2728 $line = $_;
2729 if ($debug) { printf ">> daemon: $line >>test-stdout 2>>test-stderr\n"; }
2730
2731 my $pid = fork();
2732 if (not defined $pid) { die "** fork failed: $!\n" }
2733 if (not $pid) {
2734 print "[$$]>> ${line}\n" if ($debug);
2735 close(STDIN);
2736 open(STDIN, "<", "test-stdout");
2737 close(STDOUT);
2738 open(STDOUT, ">>", "test-stdout");
2739 close(STDERR);
2740 open(STDERR, ">>", "test-stderr-server");
2741 exec "exec ${line}";
2742 exit(1);
2743 }
2744
2745# open(my $fh, ">", $pidfile) ||
2746# tests_exit(-1, "Failed to open $pidfile: $!");
2747# printf($fh, "%d\n", $pid);
2748# close($fh);
2749
2750 while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; } # Ignore any input
2751 select(undef, undef, undef, 0.3); # Let the daemon get going
2752 return (3, { exim_pid => $pid }); # Don't wait
2753 }
2754
2755
151b83f8
PH
2756
2757# Unknown command
2758
2759else { tests_exit(-1, "Command unrecognized in line $lineno: $_"); }
2760
2761
2762# Run the command, with stdin connected to a pipe, and write the stdin data
2763# to it, with appropriate substitutions. If a line ends with \NONL\, chop off
2764# the terminating newline (and the \NONL\). If the command contains
2765# -DSERVER=server add "-server" to the command, where it will adjoin the name
2766# for the stderr file. See comment above about the use of -DSERVER.
2767
9a8a6839 2768$stderrsuffix = ($cmd =~ /\s-DSERVER=server\s/)? "-server" : '';
151b83f8
PH
2769print ">> |${cmd}${stderrsuffix}\n" if ($debug);
2770open CMD, "|${cmd}${stderrsuffix}" || tests_exit(1, "Failed to run $cmd");
2771
2772CMD->autoflush(1);
2773while (<SCRIPT>)
2774 {
2775 $lineno++;
2776 last if /^\*{4}\s*$/;
2777 do_substitute($testno);
2778 if (/^(.*)\\NONL\\\s*$/) { print CMD $1; } else { print CMD; }
2779 }
2780
2781# For timeout tests, wait before closing the pipe; we expect a
2782# SIGPIPE error in this case.
2783
2784if ($wait_time > 0)
2785 {
2786 printf(" Test %d sleep $wait_time ", $$subtestref);
2787 while ($wait_time-- > 0)
2788 {
2789 print ".";
2790 sleep(1);
2791 }
2792 printf("\r Test %d $cr", $$subtestref);
2793 }
2794
2795$sigpipehappened = 0;
2796close CMD; # Waits for command to finish
2797return $yield; # Ran command and waited
2798}
2799
2800
2801
2802
2803###############################################################################
2804###############################################################################
2805
d63a9563 2806# Here begins the Main Program ...
151b83f8
PH
2807
2808###############################################################################
2809###############################################################################
2810
2811
2812autoflush STDOUT 1;
2813print "Exim tester $testversion\n";
2814
26ab1da3
HSHR
2815# extend the PATH with .../sbin
2816# we map all (.../bin) to (.../sbin:.../bin)
2817$ENV{PATH} = do {
2818 my %seen = map { $_, 1 } split /:/, $ENV{PATH};
25adc2a8
HSHR
2819 join ':' => map { m{(.*)/bin$}
2820 ? ( $seen{"$1/sbin"} ? () : ("$1/sbin"), $_)
2821 : ($_) }
26ab1da3
HSHR
2822 split /:/, $ENV{PATH};
2823};
151b83f8
PH
2824
2825##################################################
650ececb
PP
2826# Some tests check created file modes #
2827##################################################
2828
2829umask 022;
2830
2831
2832##################################################
151b83f8
PH
2833# Check for the "less" command #
2834##################################################
2835
a31c0dcd 2836@more = 'more' if system('which less >/dev/null 2>&1') != 0;
151b83f8
PH
2837
2838
2839
2840##################################################
151b83f8
PH
2841# See if an Exim binary has been given #
2842##################################################
2843
2844# If the first character of the first argument is '/', the argument is taken
1c143d9d
HSHR
2845# as the path to the binary. If the first argument does not start with a
2846# '/' but exists in the file system, it's assumed to be the Exim binary.
151b83f8 2847
151b83f8
PH
2848
2849##################################################
2850# Sort out options and which tests are to be run #
2851##################################################
2852
2853# There are a few possible options for the test script itself; after these, any
2854# options are passed on to Exim calls within the tests. Typically, this is used
2855# to turn on Exim debugging while setting up a test.
2856
4d8393c0 2857Getopt::Long::Configure qw(no_getopt_compat);
ffe0a357
HSHR
2858GetOptions(
2859 'debug' => sub { $debug = 1; $cr = "\n" },
2860 'diff' => sub { $cf = 'diff -u' },
a31c0dcd 2861 'continue' => sub { $force_continue = 1; @more = 'cat' },
ffe0a357
HSHR
2862 'update' => \$force_update,
2863 'ipv4!' => \$have_ipv4,
2864 'ipv6!' => \$have_ipv6,
2865 'keep' => \$save_output,
2866 'slow' => \$slow,
2867 'valgrind' => \$valgrind,
c9102412 2868 'range=s{2}' => \my @range_wanted,
4d8393c0 2869 'test=i@' => \my @tests_wanted,
e99725fd 2870 'flavor|flavour=s' => \$flavour,
ffe0a357
HSHR
2871 'help' => sub { pod2usage(-exit => 0) },
2872 'man' => sub {
2873 pod2usage(
2874 -exit => 0,
2875 -verbose => 2,
2876 -noperldoc => system('perldoc -V 2>/dev/null 1>&2')
2877 );
2878 },
2879) or pod2usage;
2880
2881($parm_exim, @ARGV) = Exim::Runtest::exim_binary(@ARGV);
2882print "Exim binary is `$parm_exim'\n" if defined $parm_exim;
151b83f8 2883
151b83f8 2884
4d8393c0
HSHR
2885my @wanted = sort numerically uniq
2886 @tests_wanted ? @tests_wanted : (),
2887 @range_wanted ? $range_wanted[0] .. $range_wanted[1] : (),
2888 @ARGV ? @ARGV == 1 ? $ARGV[0] :
2889 $ARGV[1] eq '+' ? $ARGV[0]..($ARGV[0] >= 9000 ? TEST_SPECIAL_TOP : TEST_TOP) :
2890 0+$ARGV[0]..0+$ARGV[1] # add 0 to cope with test numbers starting with zero
2891 : ();
2892@wanted = 1..TEST_TOP if not @wanted;
ffe0a357
HSHR
2893
2894##################################################
2895# Check for sudo access to root #
2896##################################################
2897
2898print "You need to have sudo access to root to run these tests. Checking ...\n";
2899if (system('sudo true >/dev/null') != 0)
2900 {
2901 die "** Test for sudo failed: testing abandoned.\n";
2902 }
2903else
2904 {
2905 print "Test for sudo OK\n";
2906 }
2907
2908
151b83f8
PH
2909
2910
2911##################################################
2912# Make the command's directory current #
2913##################################################
2914
2915# After doing so, we find its absolute path name.
2916
2917$cwd = $0;
2918$cwd = '.' if ($cwd !~ s|/[^/]+$||);
2919chdir($cwd) || die "** Failed to chdir to \"$cwd\": $!\n";
2920$parm_cwd = Cwd::getcwd();
2921
2922
2923##################################################
2924# Search for an Exim binary to test #
2925##################################################
2926
2927# If an Exim binary hasn't been provided, try to find one. We can handle the
2928# case where exim-testsuite is installed alongside Exim source directories. For
2929# PH's private convenience, if there's a directory just called "exim4", that
2930# takes precedence; otherwise exim-snapshot takes precedence over any numbered
2931# releases.
2932
151b83f8
PH
2933# If $parm_exim is still empty, ask the caller
2934
4d8393c0 2935if (not $parm_exim)
151b83f8
PH
2936 {
2937 print "** Did not find an Exim binary to test\n";
2938 for ($i = 0; $i < 5; $i++)
2939 {
2940 my($trybin);
2941 print "** Enter pathname for Exim binary: ";
2942 chomp($trybin = <STDIN>);
2943 if (-e $trybin)
2944 {
2945 $parm_exim = $trybin;
2946 last;
2947 }
2948 else
2949 {
2950 print "** $trybin does not exist\n";
2951 }
2952 }
9a8a6839 2953 die "** Too many tries\n" if $parm_exim eq '';
151b83f8
PH
2954 }
2955
2956
2957
2958##################################################
2959# Find what is in the binary #
2960##################################################
2961
5f122889
PP
2962# deal with TRUSTED_CONFIG_LIST restrictions
2963unlink("$parm_cwd/test-config") if -e "$parm_cwd/test-config";
72acdf0f
JH
2964open (IN, "$parm_cwd/confs/0000") ||
2965 tests_exit(-1, "Couldn't open $parm_cwd/confs/0000: $!\n");
2966open (OUT, ">test-config") ||
2967 tests_exit(-1, "Couldn't open test-config: $!\n");
2968while (<IN>) { print OUT; }
2969close(IN);
2970close(OUT);
5f122889
PP
2971
2972print("Probing with config file: $parm_cwd/test-config\n");
0e1cd284 2973
109ad60f
HSHR
2974my $eximinfo = "$parm_exim -d -C $parm_cwd/test-config -DDIR=$parm_cwd -bP exim_user exim_group";
2975chomp(my @eximinfo = `$eximinfo 2>&1`);
0e1cd284
HSHR
2976die "$0: Can't run $eximinfo\n" if $? == -1;
2977
2978warn 'Got ' . $?>>8 . " from $eximinfo\n" if $?;
109ad60f 2979foreach (@eximinfo)
151b83f8 2980 {
c039ce61
HSHR
2981 if (my ($version) = /^Exim version (\S+)/) {
2982 my $git = `git describe --dirty=-XX --match 'exim-4*'`;
2983 if (defined $git and $? == 0) {
2984 chomp $git;
c039ce61
HSHR
2985 $git =~ s/^exim-//i;
2986 $git =~ s/.*-\Kg([[:xdigit:]]+(?:-XX)?)/$1/;
fefe59d9
HSHR
2987 print <<___
2988
2989*** Version mismatch
2990*** Exim binary: $version
2991*** Git : $git
2992
2993___
c039ce61
HSHR
2994 if not $version eq $git;
2995 }
2996 }
151b83f8
PH
2997 $parm_eximuser = $1 if /^exim_user = (.*)$/;
2998 $parm_eximgroup = $1 if /^exim_group = (.*)$/;
32ca7e2d 2999 $parm_trusted_config_list = $1 if /^TRUSTED_CONFIG_LIST:.*?"(.*?)"$/;
c9fb6994
HSHR
3000 ($parm_configure_owner, $parm_configure_group) = ($1, $2)
3001 if /^Configure owner:\s*(\d+):(\d+)/;
0df394b5 3002 print if /wrong owner/;
151b83f8 3003 }
151b83f8 3004
109ad60f
HSHR
3005if (not defined $parm_eximuser) {
3006 die <<XXX, map { "|$_\n" } @eximinfo;
3007Unable to extract exim_user from binary.
3008Check if Exim refused to run; if so, consider:
3009 TRUSTED_CONFIG_LIST ALT_CONFIG_PREFIX WHITELIST_D_MACROS
3010If debug permission denied, are you in the exim group?
3011Failing to get information from binary.
3012Output from $eximinfo:
3013XXX
3014
3015}
3016
3017if ($parm_eximuser =~ /^\d+$/) { $parm_exim_uid = $parm_eximuser; }
3018else { $parm_exim_uid = getpwnam($parm_eximuser); }
151b83f8
PH
3019
3020if (defined $parm_eximgroup)
3021 {
3022 if ($parm_eximgroup =~ /^\d+$/) { $parm_exim_gid = $parm_eximgroup; }
3023 else { $parm_exim_gid = getgrnam($parm_eximgroup); }
3024 }
3025
32ca7e2d
HSHR
3026# check the permissions on the TRUSTED_CONFIG_LIST
3027if (defined $parm_trusted_config_list)
3028 {
3029 die "TRUSTED_CONFIG_LIST: $parm_trusted_config_list: $!\n"
3030 if not -f $parm_trusted_config_list;
3031
3032 die "TRUSTED_CONFIG_LIST $parm_trusted_config_list must not be world writable!\n"
3033 if 02 & (stat _)[2];
3034
3035 die sprintf "TRUSTED_CONFIG_LIST: $parm_trusted_config_list %d is group writable, but not owned by group '%s' or '%s'.\n",
3036 (stat _)[1],
3037 scalar(getgrgid 0), scalar(getgrgid $>)
3038 if (020 & (stat _)[2]) and not ((stat _)[5] == $> or (stat _)[5] == 0);
3039
3040 die sprintf "TRUSTED_CONFIG_LIST: $parm_trusted_config_list is not owned by user '%s' or '%s'.\n",
3041 scalar(getpwuid 0), scalar(getpwuid $>)
3042 if (not (-o _ or (stat _)[4] == 0));
3043
3044 open(TCL, $parm_trusted_config_list) or die "Can't open $parm_trusted_config_list: $!\n";
3045 my $test_config = getcwd() . '/test-config';
3046 die "Can't find '$test_config' in TRUSTED_CONFIG_LIST $parm_trusted_config_list."
93d55ee3 3047 if not grep { /^\Q$test_config\E$/ } <TCL>;
32ca7e2d
HSHR
3048 }
3049else
3050 {
3051 die "Unable to check the TRUSTED_CONFIG_LIST, seems to be empty?\n";
3052 }
3053
c9fb6994
HSHR
3054die "CONFIGURE_OWNER ($parm_configure_owner) does not match the user invoking $0 ($>)\n"
3055 if $parm_configure_owner != $>;
3056
3057die "CONFIGURE_GROUP ($parm_configure_group) does not match the group invoking $0 ($))\n"
3058 if 0020 & (stat "$parm_cwd/test-config")[2]
3059 and $parm_configure_group != $);
3060
2ea74e31 3061die "aux-fixed file is group-writeable; best to strip them all, recursively\n"
01c59460
JH
3062 if 0020 & (stat "aux-fixed/0037.f-1")[2];
3063
c9fb6994 3064
b6a0dbb2 3065open(EXIMINFO, "$parm_exim -d-all+transport -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
151b83f8
PH
3066 die "** Cannot run $parm_exim: $!\n";
3067
3068print "-" x 78, "\n";
3069
3070while (<EXIMINFO>)
3071 {
3072 my(@temp);
3073
b6a0dbb2 3074 if (/^(Exim|Library) version/) { print; }
96508de1 3075 if (/Runtime: /) {print; }
151b83f8 3076
21c28500
PH
3077 elsif (/^Size of off_t: (\d+)/)
3078 {
e1b3d58d 3079 print;
21c28500 3080 $have_largefiles = 1 if $1 > 4;
e1b3d58d
JJ
3081 die "** Size of off_t > 32 which seems improbable, not running tests\n"
3082 if ($1 > 32);
21c28500
PH
3083 }
3084
3085 elsif (/^Support for: (.*)/)
151b83f8
PH
3086 {
3087 print;
3088 @temp = split /(\s+)/, $1;
3089 push(@temp, ' ');
3090 %parm_support = @temp;
3091 }
3092
33191679 3093 elsif (/^Lookups \(built-in\): (.*)/)
151b83f8
PH
3094 {
3095 print;
3096 @temp = split /(\s+)/, $1;
3097 push(@temp, ' ');
3098 %parm_lookups = @temp;
3099 }
3100
21c28500 3101 elsif (/^Authenticators: (.*)/)
151b83f8
PH
3102 {
3103 print;
3104 @temp = split /(\s+)/, $1;
3105 push(@temp, ' ');
3106 %parm_authenticators = @temp;
3107 }
3108
21c28500 3109 elsif (/^Routers: (.*)/)
151b83f8
PH
3110 {
3111 print;
3112 @temp = split /(\s+)/, $1;
3113 push(@temp, ' ');
3114 %parm_routers = @temp;
3115 }
3116
3117 # Some transports have options, e.g. appendfile/maildir. For those, ensure
3118 # that the basic transport name is set, and then the name with each of the
3119 # options.
3120
21c28500 3121 elsif (/^Transports: (.*)/)
151b83f8
PH
3122 {
3123 print;
3124 @temp = split /(\s+)/, $1;
3125 my($i,$k);
3126 push(@temp, ' ');
3127 %parm_transports = @temp;
3128 foreach $k (keys %parm_transports)
3129 {
3130 if ($k =~ "/")
3131 {
3132 @temp = split /\//, $k;
9a8a6839 3133 $parm_transports{$temp[0]} = " ";
151b83f8
PH
3134 for ($i = 1; $i < @temp; $i++)
3135 { $parm_transports{"$temp[0]/$temp[$i]"} = " "; }
3136 }
3137 }
3138 }
c11d665d
JH
3139
3140 elsif (/^Malware: (.*)/)
3141 {
3142 print;
3143 @temp = split /(\s+)/, $1;
3144 push(@temp, ' ');
3145 %parm_malware = @temp;
3146 }
3147
151b83f8
PH
3148 }
3149close(EXIMINFO);
3150print "-" x 78, "\n";
3151
5f122889 3152unlink("$parm_cwd/test-config");
151b83f8
PH
3153
3154##################################################
3155# Check for SpamAssassin and ClamAV #
3156##################################################
3157
3158# These are crude tests. If they aren't good enough, we'll have to improve
3159# them, for example by actually passing a message through spamc or clamscan.
3160
9a8a6839 3161if (defined $parm_support{Content_Scanning})
151b83f8 3162 {
3ff2360f
JH
3163 my $sock = new FileHandle;
3164
151b83f8
PH
3165 if (system("spamc -h 2>/dev/null >/dev/null") == 0)
3166 {
151b83f8
PH
3167 print "The spamc command works:\n";
3168
3169 # This test for an active SpamAssassin is courtesy of John Jetmore.
3170 # The tests are hard coded to localhost:783, so no point in making
3171 # this test flexible like the clamav test until the test scripts are
4c04137d 3172 # changed. spamd doesn't have the nice PING/PONG protocol that
151b83f8
PH
3173 # clamd does, but it does respond to errors in an informative manner,
3174 # so use that.
3175
3176 my($sint,$sport) = ('127.0.0.1',783);
3177 eval
3178 {
3179 my $sin = sockaddr_in($sport, inet_aton($sint))
3180 or die "** Failed packing $sint:$sport\n";
3ff2360f 3181 socket($sock, PF_INET, SOCK_STREAM, getprotobyname('tcp'))
151b83f8
PH
3182 or die "** Unable to open socket $sint:$sport\n";
3183
3184 local $SIG{ALRM} =
3185 sub { die "** Timeout while connecting to socket $sint:$sport\n"; };
3186 alarm(5);
3ff2360f 3187 connect($sock, $sin)
151b83f8
PH
3188 or die "** Unable to connect to socket $sint:$sport\n";
3189 alarm(0);
3190
3ff2360f
JH
3191 select((select($sock), $| = 1)[0]);
3192 print $sock "bad command\r\n";
151b83f8
PH
3193
3194 $SIG{ALRM} =
3195 sub { die "** Timeout while reading from socket $sint:$sport\n"; };
3196 alarm(10);
3ff2360f 3197 my $res = <$sock>;
151b83f8
PH
3198 alarm(0);
3199
3200 $res =~ m|^SPAMD/|
3201 or die "** Did not get SPAMD from socket $sint:$sport. "
3202 ."It said: $res\n";
3203 };
3204 alarm(0);
3205 if($@)
3206 {
3207 print " $@";
3208 print " Assume SpamAssassin (spamd) is not running\n";
3209 }
3210 else
3211 {
9a8a6839 3212 $parm_running{SpamAssassin} = ' ';
151b83f8
PH
3213 print " SpamAssassin (spamd) seems to be running\n";
3214 }
3215 }
3216 else
3217 {
3218 print "The spamc command failed: assume SpamAssassin (spamd) is not running\n";
3219 }
3220
3221 # For ClamAV, we need to find the clamd socket for use in the Exim
3222 # configuration. Search for the clamd configuration file.
3223
3224 if (system("clamscan -h 2>/dev/null >/dev/null") == 0)
3225 {
3226 my($f, $clamconf, $test_prefix);
3227
3228 print "The clamscan command works";
3229
3230 $test_prefix = $ENV{EXIM_TEST_PREFIX};
9a8a6839 3231 $test_prefix = '' if !defined $test_prefix;
151b83f8
PH
3232
3233 foreach $f ("$test_prefix/etc/clamd.conf",
3234 "$test_prefix/usr/local/etc/clamd.conf",
9a8a6839 3235 "$test_prefix/etc/clamav/clamd.conf", '')
151b83f8
PH
3236 {
3237 if (-e $f)
3238 {
3239 $clamconf = $f;
3240 last;
3241 }
3242 }
3243
11b3bc4d
PH
3244 # Read the ClamAV configuration file and find the socket interface.
3245
9a8a6839 3246 if ($clamconf ne '')
151b83f8 3247 {
11b3bc4d 3248 my $socket_domain;
151b83f8
PH
3249 open(IN, "$clamconf") || die "\n** Unable to open $clamconf: $!\n";
3250 while (<IN>)
3251 {
3252 if (/^LocalSocket\s+(.*)/)
3253 {
3254 $parm_clamsocket = $1;
11b3bc4d 3255 $socket_domain = AF_UNIX;
151b83f8
PH
3256 last;
3257 }
11b3bc4d
PH
3258 if (/^TCPSocket\s+(\d+)/)
3259 {
3260 if (defined $parm_clamsocket)
3261 {
3262 $parm_clamsocket .= " $1";
3263 $socket_domain = AF_INET;
3264 last;
3265 }
3266 else
3267 {
3268 $parm_clamsocket = " $1";
3269 }
3270 }
3271 elsif (/^TCPAddr\s+(\S+)/)
3272 {
3273 if (defined $parm_clamsocket)
3274 {
3275 $parm_clamsocket = $1 . $parm_clamsocket;
3276 $socket_domain = AF_INET;
3277 last;
3278 }
3279 else
3280 {
3281 $parm_clamsocket = $1;
3282 }
3283 }
151b83f8
PH
3284 }
3285 close(IN);
11b3bc4d
PH
3286
3287 if (defined $socket_domain)
151b83f8
PH
3288 {
3289 print ":\n The clamd socket is $parm_clamsocket\n";
3290 # This test for an active ClamAV is courtesy of Daniel Tiefnig.
3291 eval
3292 {
11b3bc4d
PH
3293 my $socket;
3294 if ($socket_domain == AF_UNIX)
3295 {
3296 $socket = sockaddr_un($parm_clamsocket) or die "** Failed packing '$parm_clamsocket'\n";
3297 }
3298 elsif ($socket_domain == AF_INET)
3299 {
3300 my ($ca_host, $ca_port) = split(/\s+/,$parm_clamsocket);
3301 my $ca_hostent = gethostbyname($ca_host) or die "** Failed to get raw address for host '$ca_host'\n";
3302 $socket = sockaddr_in($ca_port, $ca_hostent) or die "** Failed packing '$parm_clamsocket'\n";
3303 }
3304 else
3305 {
3306 die "** Unknown socket domain '$socket_domain' (should not happen)\n";
3307 }
3ff2360f 3308 socket($sock, $socket_domain, SOCK_STREAM, 0) or die "** Unable to open socket '$parm_clamsocket'\n";
151b83f8
PH
3309 local $SIG{ALRM} = sub { die "** Timeout while connecting to socket '$parm_clamsocket'\n"; };
3310 alarm(5);
3ff2360f 3311 connect($sock, $socket) or die "** Unable to connect to socket '$parm_clamsocket'\n";
151b83f8
PH
3312 alarm(0);
3313
3ff2360f
JH
3314 my $ofh = select $sock; $| = 1; select $ofh;
3315 print $sock "PING\n";
151b83f8
PH
3316
3317 $SIG{ALRM} = sub { die "** Timeout while reading from socket '$parm_clamsocket'\n"; };
3318 alarm(10);
3ff2360f 3319 my $res = <$sock>;
151b83f8
PH
3320 alarm(0);
3321
3322 $res =~ /PONG/ or die "** Did not get PONG from socket '$parm_clamsocket'. It said: $res\n";
3323 };
3324 alarm(0);
3325
3326 if($@)
3327 {
520de300 3328 print " $@";
151b83f8
PH
3329 print " Assume ClamAV is not running\n";
3330 }
3331 else
3332 {
9a8a6839 3333 $parm_running{ClamAV} = ' ';
151b83f8
PH
3334 print " ClamAV seems to be running\n";
3335 }
3336 }
3337 else
3338 {
11b3bc4d 3339 print ", but the socket for clamd could not be determined\n";
151b83f8
PH
3340 print "Assume ClamAV is not running\n";
3341 }
3342 }
3343
3344 else
3345 {
3346 print ", but I can't find a configuration for clamd\n";
3347 print "Assume ClamAV is not running\n";
3348 }
3349 }
3350 }
3351
3352
3353##################################################
bdf36f7c
JH
3354# Check for redis #
3355##################################################
9a8a6839 3356if (defined $parm_lookups{redis})
bdf36f7c
JH
3357 {
3358 if (system("redis-server -v 2>/dev/null >/dev/null") == 0)
3359 {
3360 print "The redis-server command works\n";
9a8a6839 3361 $parm_running{redis} = ' ';
bdf36f7c
JH
3362 }
3363 else
3364 {
3365 print "The redis-server command failed: assume Redis not installed\n";
3366 }
3367 }
3368
3369##################################################
151b83f8
PH
3370# Test for the basic requirements #
3371##################################################
3372
3373# This test suite assumes that Exim has been built with at least the "usual"
3374# set of routers, transports, and lookups. Ensure that this is so.
3375
9a8a6839 3376$missing = '';
151b83f8 3377
9a8a6839 3378$missing .= " Lookup: lsearch\n" if (!defined $parm_lookups{lsearch});
151b83f8 3379
9a8a6839
HSHR
3380$missing .= " Router: accept\n" if (!defined $parm_routers{accept});
3381$missing .= " Router: dnslookup\n" if (!defined $parm_routers{dnslookup});
3382$missing .= " Router: manualroute\n" if (!defined $parm_routers{manualroute});
3383$missing .= " Router: redirect\n" if (!defined $parm_routers{redirect});
151b83f8 3384
9a8a6839
HSHR
3385$missing .= " Transport: appendfile\n" if (!defined $parm_transports{appendfile});
3386$missing .= " Transport: autoreply\n" if (!defined $parm_transports{autoreply});
3387$missing .= " Transport: pipe\n" if (!defined $parm_transports{pipe});
3388$missing .= " Transport: smtp\n" if (!defined $parm_transports{smtp});
151b83f8 3389
9a8a6839 3390if ($missing ne '')
151b83f8
PH
3391 {
3392 print "\n";
3393 print "** Many features can be included or excluded from Exim binaries.\n";
3394 print "** This test suite requires that Exim is built to contain a certain\n";
3395 print "** set of basic facilities. It seems that some of these are missing\n";
3396 print "** from the binary that is under test, so the test cannot proceed.\n";
3397 print "** The missing facilities are:\n";
3398 print "$missing";
3399 die "** Test script abandoned\n";
3400 }
3401
3402
3403##################################################
3404# Check for the auxiliary programs #
3405##################################################
3406
3407# These are always required:
3408
3409for $prog ("cf", "checkaccess", "client", "client-ssl", "client-gnutls",
3410 "fakens", "iefbr14", "server")
3411 {
9a8a6839
HSHR
3412 next if ($prog eq "client-ssl" && !defined $parm_support{OpenSSL});
3413 next if ($prog eq "client-gnutls" && !defined $parm_support{GnuTLS});
151b83f8
PH
3414 if (!-e "bin/$prog")
3415 {
3416 print "\n";
3417 print "** bin/$prog does not exist. Have you run ./configure and make?\n";
3418 die "** Test script abandoned\n";
3419 }
3420 }
3421
3422# If the "loaded" binary is missing, we cut out tests for ${dlfunc. It isn't
3423# compiled on systems where we don't know how to. However, if Exim does not
3424# have that functionality compiled, we needn't bother.
3425
3426$dlfunc_deleted = 0;
9a8a6839 3427if (defined $parm_support{Expand_dlfunc} && !-e 'bin/loaded')
151b83f8 3428 {
9a8a6839 3429 delete $parm_support{Expand_dlfunc};
151b83f8
PH
3430 $dlfunc_deleted = 1;
3431 }
3432
3433
3434##################################################
3435# Find environmental details #
3436##################################################
3437
3438# Find the caller of this program.
3439
3440($parm_caller,$pwpw,$parm_caller_uid,$parm_caller_gid,$pwquota,$pwcomm,
eeeda78a 3441 $parm_caller_gecos, $parm_caller_home) = getpwuid($>);
151b83f8
PH
3442
3443$pwpw = $pwpw; # Kill Perl warnings
3444$pwquota = $pwquota;
3445$pwcomm = $pwcomm;
151b83f8
PH
3446
3447$parm_caller_group = getgrgid($parm_caller_gid);
3448
42ec9880 3449print "Program caller is $parm_caller ($parm_caller_uid), whose group is $parm_caller_group ($parm_caller_gid)\n";
151b83f8
PH
3450print "Home directory is $parm_caller_home\n";
3451
5f122889
PP
3452unless (defined $parm_eximgroup)
3453 {
3454 print "Unable to derive \$parm_eximgroup.\n";
3455 die "** ABANDONING.\n";
01c59460
JH
3456 }
3457
3458if ($parm_caller_home eq $parm_cwd)
3459 {
3460 print "will confuse working dir with homedir; change homedir\n";
3461 die "** ABANDONING.\n";
5f122889
PP
3462 }
3463
151b83f8
PH
3464print "You need to be in the Exim group to run these tests. Checking ...";
3465
3466if (`groups` =~ /\b\Q$parm_eximgroup\E\b/)
3467 {
3468 print " OK\n";
3469 }
3470else
3471 {
3472 print "\nOh dear, you are not in the Exim group.\n";
3473 die "** Testing abandoned.\n";
3474 }
3475
3476# Find this host's IP addresses - there may be many, of course, but we keep
3477# one of each type (IPv4 and IPv6).
5c03403d 3478#XXX it would be good to avoid non-UP interfaces
151b83f8 3479
bb660b56
HSHR
3480open(IFCONFIG, '-|', (grep { -x "$_/ip" } split /:/, $ENV{PATH}) ? 'ip address' : 'ifconfig -a')
3481 or die "** Cannot run 'ip address' or 'ifconfig -a'\n";
d63a9563 3482while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
151b83f8 3483 {
39e69de6 3484 if (/^(?:[0-9]+: )?([a-z0-9]+): /) { $ifname = $1; }
40e3c5bf 3485
157609cd 3486 if (not $parm_ipv4 and /^\s*inet(?:\saddr(?:ess))?:?\s*(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)
151b83f8 3487 {
dc8380bb 3488 # It would be nice to be able to vary the /16 used for manyhome; we could take
3cbde9b9
JH
3489 # an option to runtest used here - but we'd also have to pass it on to fakens.
3490 # Possibly an environment variable?
8af2888b 3491 next if $1 eq '0.0.0.0' or $1 =~ /^(?:127|10\.250)\./;
d63a9563 3492 $parm_ipv4 = $1;
151b83f8
PH
3493 }
3494
22c3450e 3495 if ( (not $parm_ipv6 or $parm_ipv6 =~ /%/)
1d717e1c 3496 and /^\s*inet6(?:\saddr(?:ess))?:?\s*([abcdef\d:]+)(?:%[^ \/]+)?(?:\/\d+)?/i)
151b83f8 3497 {
39e69de6 3498 next if $1 eq '::' or $1 eq '::1' or $1 =~ /^ff00/i or $1 =~ /^fe80::1/i;
d63a9563 3499 $parm_ipv6 = $1;
40e3c5bf 3500 if ($1 =~ /^fe80/i) { $parm_ipv6 .= '%' . $ifname; }
151b83f8
PH
3501 }
3502 }
3503close(IFCONFIG);
3504
3505# Use private IP addresses if there are no public ones.
3506
151b83f8
PH
3507# If either type of IP address is missing, we need to set the value to
3508# something other than empty, because that wrecks the substitutions. The value
3509# is reflected, so use a meaningful string. Set appropriate options for the
3510# "server" command. In practice, however, many tests assume 127.0.0.1 is
3511# available, so things will go wrong if there is no IPv4 address. The lack
3512# of IPV4 or IPv6 can be simulated by command options, which force $have_ipv4
3513# and $have_ipv6 false.
3514
d63a9563 3515if (not $parm_ipv4)
151b83f8
PH
3516 {
3517 $have_ipv4 = 0;
3518 $parm_ipv4 = "<no IPv4 address found>";
3519 $server_opts .= " -noipv4";
3520 }
3521elsif ($have_ipv4 == 0)
3522 {
3523 $parm_ipv4 = "<IPv4 testing disabled>";
3524 $server_opts .= " -noipv4";
3525 }
3526else
3527 {
9a8a6839 3528 $parm_running{IPv4} = " ";
151b83f8
PH
3529 }
3530
d63a9563 3531if (not $parm_ipv6)
151b83f8
PH
3532 {
3533 $have_ipv6 = 0;
3534 $parm_ipv6 = "<no IPv6 address found>";
3535 $server_opts .= " -noipv6";
9a8a6839 3536 delete($parm_support{IPv6});
151b83f8
PH
3537 }
3538elsif ($have_ipv6 == 0)
3539 {
3540 $parm_ipv6 = "<IPv6 testing disabled>";
3541 $server_opts .= " -noipv6";
9a8a6839 3542 delete($parm_support{IPv6});
151b83f8 3543 }
9a8a6839 3544elsif (!defined $parm_support{IPv6})
151b83f8
PH
3545 {
3546 $have_ipv6 = 0;
3547 $parm_ipv6 = "<no IPv6 support in Exim binary>";
3548 $server_opts .= " -noipv6";
3549 }
3550else
3551 {
9a8a6839 3552 $parm_running{IPv6} = " ";
151b83f8
PH
3553 }
3554
3555print "IPv4 address is $parm_ipv4\n";
3556print "IPv6 address is $parm_ipv6\n";
cef8a6ef 3557$parm_ipv6 =~ /^[^%\/]*/;
40e3c5bf
JH
3558# drop any %scope from the ipv6, for some uses
3559($parm_ipv6_stripped = $parm_ipv6) =~ s/%.*//g;
151b83f8 3560
75758eeb
PH
3561# For munging test output, we need the reversed IP addresses.
3562
9a8a6839 3563$parm_ipv4r = ($parm_ipv4 !~ /^\d/)? '' :
75758eeb
PH
3564 join(".", reverse(split /\./, $parm_ipv4));
3565
1b781f48 3566$parm_ipv6r = $parm_ipv6; # Appropriate if not in use
75758eeb
PH
3567if ($parm_ipv6 =~ /^[\da-f]/)
3568 {
40e3c5bf 3569 my(@comps) = split /:/, $parm_ipv6_stripped;
75758eeb
PH
3570 my(@nibbles);
3571 foreach $comp (@comps)
3572 {
3573 push @nibbles, sprintf("%lx", hex($comp) >> 8);
3574 push @nibbles, sprintf("%lx", hex($comp) & 0xff);
3575 }
3576 $parm_ipv6r = join(".", reverse(@nibbles));
3577 }
3578
151b83f8
PH
3579# Find the host name, fully qualified.